)]}'
{
  "log": [
    {
      "commit": "341b7cde6ccc60672fcd7fc84dd24a1b7c0b8d94",
      "tree": "25b284f436f24a0c21e4a656531831619002757c",
      "parents": [
        "d2f4d47d84f8c665ab9babb2cc84d2e7872a96e1"
      ],
      "author": {
        "name": "Ido Yariv",
        "email": "ido@wizery.com",
        "time": "Thu Mar 31 10:07:01 2011 +0200"
      },
      "committer": {
        "name": "Luciano Coelho",
        "email": "coelho@ti.com",
        "time": "Tue Apr 19 16:49:20 2011 +0300"
      },
      "message": "wl12xx: Handle platforms without level trigger interrupts\n\nSome platforms are incapable of triggering on level interrupts. Add a\nplatform quirks member in the platform data structure, as well as an\nedge interrupt quirk which can be set on such platforms.\n\nWhen the interrupt is requested with IRQF_TRIGGER_RISING, IRQF_ONESHOT\ncannot be used, as we might miss interrupts that occur after the FW\nstatus is cleared and before the threaded interrupt handler exits.\n\nMoreover, when IRQF_ONESHOT is not set, iterating more than once in the\nthreaded interrupt handler introduces a few race conditions between this\nhandler and the hardirq handler. Currently this is worked around by\nlimiting the loop to one iteration only. This workaround has an impact\non performance. To remove to this restriction, the race conditions will\nneed to be addressed.\n\nSigned-off-by: Ido Yariv \u003cido@wizery.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\n"
    },
    {
      "commit": "d29633b40e6afc6b4276a4e381bc532cc84be104",
      "tree": "136e6a871de72b504a8999b924c8c29958654382",
      "parents": [
        "8bf69aae4cb9b196ba5ac386f83a1ca3865af11f"
      ],
      "author": {
        "name": "Ido Yariv",
        "email": "ido@wizery.com",
        "time": "Thu Mar 31 10:06:57 2011 +0200"
      },
      "committer": {
        "name": "Luciano Coelho",
        "email": "coelho@ti.com",
        "time": "Tue Apr 19 16:49:17 2011 +0300"
      },
      "message": "wl12xx: Clean up and fix the 128x boot sequence\n\nClean up the boot sequence code \u0026 fix the following issues:\n1. Always read the registers\u0027 values and set the relevant bits instead of\n   zeroing all other bits\n2. Handle cases where wl1271_top_reg_read returns an error\n3. Verify that the HW can detect the selected clock source\n4. Remove 128x PG10 initialization code\n5. Configure the MCS PLL to work in HP mode\n\nSigned-off-by: Ido Yariv \u003cido@wizery.com\u003e\nReviewed-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\n"
    },
    {
      "commit": "62c7d085e1f2a1f2b4d89560551eff18d703b3b1",
      "tree": "148246891c0c7f41e6cdb72623ad58e2ae0ed21c",
      "parents": [
        "34a0a2025c8bddc6505b56a58ef2e7333a4e4165"
      ],
      "author": {
        "name": "Luciano Coelho",
        "email": "coelho@ti.com",
        "time": "Thu Mar 10 16:42:47 2011 +0200"
      },
      "committer": {
        "name": "Luciano Coelho",
        "email": "coelho@ti.com",
        "time": "Tue Apr 19 16:19:44 2011 +0300"
      },
      "message": "wl12xx: add new board_tcxo_clock element to the platform data\n\nThis new value is a new type of clock setting that is used by wl128x\nchipsets.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\n"
    },
    {
      "commit": "c8aea565e8f715d9f10064b1cbfbc15bf75df501",
      "tree": "4c0b875ef905991f3096e169b3469efb1d677ea7",
      "parents": [
        "34d59c07e9ad7130813c28f8554ef1298af923b7"
      ],
      "author": {
        "name": "Gery Kahn",
        "email": "geryk@ti.com",
        "time": "Tue Oct 05 16:09:05 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Nov 15 13:25:02 2010 -0500"
      },
      "message": "wl1271: ref_clock cosmetic changes\n\nCosmetic cleanup for ref_clock code while configured by board.\n\nSigned-off-by: Gery Kahn \u003cgeryk@ti.com\u003e\nSigned-off-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\n"
    },
    {
      "commit": "65836112fc24bdf009554481b36b6ba0a690b855",
      "tree": "a165b5eb510a16c17c466fb79ae4a6c98998e3be",
      "parents": [
        "381bd10aff491216383291879b29461efb575119"
      ],
      "author": {
        "name": "Ohad Ben-Cohen",
        "email": "ohad@wizery.com",
        "time": "Tue Sep 28 20:20:28 2010 +0200"
      },
      "committer": {
        "name": "Luciano Coelho",
        "email": "luciano.coelho@nokia.com",
        "time": "Thu Sep 30 06:01:56 2010 +0300"
      },
      "message": "wl12xx: fix non-wl12xx build scenarios\n\nSupport building wl1271-equipped boards without building the\nwl1271 driver itself, e.g.:\n\nCONFIG_MACH_OMAP_ZOOM3\u003dy\nCONFIG_WL12XX is not set\n\nReported-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nSigned-off-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\n"
    },
    {
      "commit": "15cea99306ae14ce5f7c3d3989bcc17202e2b0be",
      "tree": "4755cdb83ca470dfa44b02f6f34aa8fa1c3454c6",
      "parents": [
        "09cecc340b3b4d9960b039c0f576548bbf857f5a"
      ],
      "author": {
        "name": "Ohad Ben-Cohen",
        "email": "ohad@wizery.com",
        "time": "Thu Sep 16 01:31:51 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Sep 21 11:05:00 2010 -0400"
      },
      "message": "wl1271: make ref_clock configurable by board\n\nThe wl1271 device is using a reference clock that may change\nbetween board to board.\n\nMake the ref_clock parameter configurable by board settings\ninstead of having a hard coded value in the sources.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "61ee7007a5d61aa066076da578e8e8084e122d7d",
      "tree": "a4a9a4d812504af92fd4e84e92578b7dfbbf2605",
      "parents": [
        "2cc78ff78c0af502b040d4527212e29e02d3231d"
      ],
      "author": {
        "name": "Ohad Ben-Cohen",
        "email": "ohad@wizery.com",
        "time": "Thu Sep 16 01:31:12 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Sep 21 11:04:57 2010 -0400"
      },
      "message": "wl12xx: add platform data passing support\n\nAdd a simple mechanism to pass platform data to the\nSDIO instances of wl12xx.\n\nThis way there is no confusion over who owns the \u0027embedded data\u0027,\ntypechecking is preserved, and no possibility for the wrong driver to\npick up the data.\n\nOriginally proposed by Russell King.\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "c1f9a095600e07fefe64eb94eb711f410100824a",
      "tree": "7117a504f324b2b835fea50a5379cd94429978f5",
      "parents": [
        "09f250ac8faefa9deb14854e4715a139ed99617b"
      ],
      "author": {
        "name": "Ohad Ben-Cohen",
        "email": "ohad@wizery.com",
        "time": "Thu Sep 16 13:16:02 2010 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Sep 21 11:04:38 2010 -0400"
      },
      "message": "wl12xx: make wl12xx.h common to both spi and sdio\n\nMove wl12xx.h outside of the spi-specific location,\nso it can be shared with both spi and sdio solutions.\n\nUpdate all users of spi/wl12xx.h accordingly\n\nSigned-off-by: Ohad Ben-Cohen \u003cohad@wizery.com\u003e\nAcked-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "4c5f7d7a1e6cf20ad515dad8a63c0813fac5bcea",
      "tree": "f49374562261f98bb92d0b4773d300eb2cc11d82",
      "parents": [
        "31c726f0963cd022680dacd0c9f0036d7e12a8b2"
      ],
      "author": {
        "name": "Kalle Valo",
        "email": "kvalo@adurom.com",
        "time": "Sun Aug 22 22:46:28 2010 +0300"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Aug 25 14:33:19 2010 -0400"
      },
      "message": "wl12xx: change contact person for the include file\n\nLuciano should be the contact person for the include/linux/spi/wl12xx.h file.\n\nSigned-off-by: Kalle Valo \u003ckvalo@adurom.com\u003e\nAcked-by: Luciano Coelho \u003cluciano.coelho@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "a02a2956809d88b42b9a1f8003d60a343353b5ea",
      "tree": "58f3375f5b8c54ca68ca32ae30b705e11c2457af",
      "parents": [
        "7f1f5a0060e377ff6a15903487b39223e12b8568"
      ],
      "author": {
        "name": "Grazvydas Ignotas",
        "email": "notasas@gmail.com",
        "time": "Fri Apr 16 13:22:12 2010 +0300"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Apr 16 15:47:14 2010 -0400"
      },
      "message": "wl1251: add support for dedicated IRQ line\n\nwl1251 has WLAN_IRQ pin for generating interrupts to host processor,\nwhich is mandatory in SPI mode and optional in SDIO mode (which can\nuse SDIO interrupts instead). However TI recommends using deditated\nIRQ line for SDIO too.\n\nAdd support for using dedicated interrupt line with SDIO, but also leave\nability to switch to SDIO interrupts in case it\u0027s needed.\n\nSigned-off-by: Grazvydas Ignotas \u003cnotasas@gmail.com\u003e\nReviewed-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "c95cf3d09adc9afe7816a13a920b6df36062a3fe",
      "tree": "6f7b922526c4ae4fa1d593d8bcd89738d37a2784",
      "parents": [
        "7010193ad8e64dfbc006b167c2ee712d4441292c"
      ],
      "author": {
        "name": "David-John Willis",
        "email": "John.Willis@Distant-earth.com",
        "time": "Tue Nov 17 18:50:09 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Nov 18 17:09:24 2009 -0500"
      },
      "message": "wl1251: add NVS in EEPROM support\n\nwl1251 supports also that NVS is stored in a separate EEPROM, add support\nfor that.\n\nkvalo: use platform data instead Kconfig and use kernel style\n\nSigned-off-by: David-John Willis \u003cJohn.Willis@Distant-earth.com\u003e\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "2f01a1f58889fbfeb68b1bc1b52e4197f3333490",
      "tree": "949cf33c4e3dcdf7abcf95c9bda4d8372da04f97",
      "parents": [
        "d53d9e67b55f6a9fc3f836c5c392eb41ce5676f4"
      ],
      "author": {
        "name": "Kalle Valo",
        "email": "kalle.valo@nokia.com",
        "time": "Wed Apr 29 23:33:31 2009 +0300"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed May 06 15:14:54 2009 -0400"
      },
      "message": "wl12xx: add driver\n\nwl12xx is a driver for TI wl1251 802.11 chipset designed for embedded\ndevices, supporting both SDIO and SPI busses. Currently the driver\nsupports only SPI. Adding support 1253 (the 5 GHz version) should be\nrelatively easy. More information here:\n\nhttp://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId\u003d4711\u0026navigationId\u003d12494\u0026templateId\u003d6123\n\n(Collapsed original sequence of pre-merge patches into single commit for\ninitial merge. -- JWL)\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    }
  ]
}