)]}' { "log": [ { "commit": "0c2b0b6ebca94dab1c6d4dd7e4d7dada98260332", "tree": "8a5585a08cebe20a9741d6c9dbcb153f38acddba", "parents": [ "4320c26e053d5e71e1afbc3f5fee829254527e7e", "e91f55cdb5f9d7051ec6a6e7069e27e1bc3d4350" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 24 01:52:02 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 24 01:52:03 2011 -0700" }, "message": "Merge \"mfd: 8018: Add led and pwm devices\" into msm-3.0" }, { "commit": "caeef66d6df3f77a70d1ddfae85d61c783e7d844", "tree": "a811436966430bbcacce26c13e3117d24a9a5f13", "parents": [ "92a6c85f3efe294fee5a061366a9b2d8a2bb1b07", "bace50b68cb37220406094be7ced3b268e3e9556" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Oct 23 16:41:13 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Oct 23 16:41:13 2011 -0700" }, "message": "Merge changes I75900b24,Ibca9cdbf,Ic926e968 into msm-3.0\n\n* changes:\n input: atmel_mxt_ts: Move regulators to LPM/HPM in suspend/resume\n input: atmel_mxt_ts: Add retry mechanism for I2C read/write\n input: atmel_mxt_ts: Clean up pdata and update config array\n" }, { "commit": "f22463f414d74984de74b15e71bf729039e7c1e0", "tree": "055f33037a275e2208bd46b93a0d8c2d7a173067", "parents": [ "9f5f6e5fabdb48db949beb682b42ae7a6bb50176", "a6c514f3fbf9d08562655f183c4949a2520046ef" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 11:59:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 11:59:28 2011 -0700" }, "message": "Merge changes Id6b5096f,Ic8bd7e13 into msm-3.0\n\n* changes:\n eeprom_93cx6: Add write support\n eeprom_93cx6: Add data direction control.\n" }, { "commit": "9f5f6e5fabdb48db949beb682b42ae7a6bb50176", "tree": "9a13a7585e36e8b32f18ca84e1758621b94fddb7", "parents": [ "3409a0ad317279b827a74f27776f5a82a3a7f4e1", "0a3dc88214ed193169eda76ebae0cdda9b795cb8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 11:59:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 11:59:28 2011 -0700" }, "message": "Merge changes Idb1e623b,I854d90ac into msm-3.0\n\n* changes:\n msm_rq_stats: removing calculation of rq_stats\n rq_stats: Doing rq_stats calculation in the scheduler tick.\n" }, { "commit": "2f863174f9c5f974b1e4fbe7f0e17de5c9118122", "tree": "aac4c1c714c419c575d86f109fa1b9fa1bd6c018", "parents": [ "829af4815d3314c8c2661fea4f5c807fb0641ef0" ], "author": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Mon Oct 17 10:56:58 2011 -0700" }, "committer": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Fri Oct 21 11:46:20 2011 -0700" }, "message": "input: atmel_mxt_ts: Clean up pdata and update config array\n\nRemove blen, tchthr, x_line, y_line, orient and voltage from platform\ndata to not to overwrite the config data with these values. Update\nconfig array to have the proper values.\nTurn on i2c_pull_up in platform data.\n\nChange-Id: Ic926e96886f52cea3dad29e9a44559b26c717259\nSigned-off-by: Jing Lin \u003cjinglin@codeaurora.org\u003e\n" }, { "commit": "e91f55cdb5f9d7051ec6a6e7069e27e1bc3d4350", "tree": "c4ed303bc49dd67d2ee504d9ed0bfdf49ea3cbe5", "parents": [ "829af4815d3314c8c2661fea4f5c807fb0641ef0" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Oct 17 15:10:07 2011 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Oct 21 10:39:28 2011 -0700" }, "message": "mfd: 8018: Add led and pwm devices\n\nChange-Id: I92b9f6956aac24cef8898ce59263dd80b5b30d3f\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "12c97b5651627b46e80364ed693fde0ff2c5b2c7", "tree": "708cab01a43d2336201012bb7180b0d5c5e5ebb3", "parents": [ "a7620516bbe2942cf4888ad1f28e67e44c061dfe", "e3316a10982cfd753c9824abe249c2096d4f68e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 06:05:39 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 06:05:40 2011 -0700" }, "message": "Merge changes I7cdf8e45,Id54dcc80 into msm-3.0\n\n* changes:\n USB: EHCI: msm: Configure GPIOs for HSIC strobe and data lines\n USB: EHCI: msm: Add support for HSIC based Host Controller\n" }, { "commit": "391afad3862f190f9d3c7a30d7cae697d175d13e", "tree": "f6aea87472b3923b22b1cae9ed98e2f0f0dee868", "parents": [ "fd5b55d057e7d2842cbc50f2386ed89d2b5c41f7", "fb8e3c1d0c97219d251f4a3b2d90c2daad3d79a5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 03:06:17 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 03:06:17 2011 -0700" }, "message": "Merge \"diag: Add support for APQ8064\" into msm-3.0" }, { "commit": "ab1ae8599731ef7315282465ea1ebdf2fe60563e", "tree": "997e40ec7f7afb2711a139996b3901f0c9ed5a10", "parents": [ "a61c8fb9f3d115005c43ffc50f624fb70a39cdb0", "4b99172a1df8b1ad2b48343bead39685f294e680" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "message": "Merge \"msm_fb: display: CSC Matrix update support is added\" into msm-3.0" }, { "commit": "a6c514f3fbf9d08562655f183c4949a2520046ef", "tree": "665a573bcd54af8b58669ba6e82ad1eb91ed57df", "parents": [ "69215d9680873e76042c902ee6df49f8085b11f5" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Thu Apr 29 13:16:25 2010 +0000" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Oct 20 19:02:06 2011 -0700" }, "message": "eeprom_93cx6: Add write support\n\nAdd support for writing data to EEPROM.\n\nChange-Id: Id6b5096f2d59d21773c06ba3803151c2f3248956\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nCc: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Linux Kernel \u003clinux-kernel@vger.kernel.org\u003e\n[sboyd@codeaurora.org: use usleep_range() instead of msleep()]\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "69215d9680873e76042c902ee6df49f8085b11f5", "tree": "0ca51b22f70863c02ff251ef931f8315ae8453bd", "parents": [ "b8b5669957f3fe0378c431013dca33757e05bda0" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Thu Apr 29 13:16:24 2010 +0000" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Oct 20 19:02:06 2011 -0700" }, "message": "eeprom_93cx6: Add data direction control.\n\nSome devices need to know if the data is to be output or read, so add a\ndata direction into the eeprom structure to tell the driver whether the\ndata line should be driven.\n\nThe user in this case is the Micrel KS8851 which has a direction\ncontrol for the EEPROM data line and thus needs to know whether\nto drive it (writing) or to tristate it for receiving.\n\nChange-Id: Ic8bd7e13ce9bde423001ca23f3de02e76e1dbdaf\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nCc: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Linux Kernel \u003clinux-kernel@vger.kernel.org\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "5bcd20614d16a02d774c16a94e2c706e5939ad15", "tree": "9321ce8f58479f195af9a059aaca1ae458f51529", "parents": [ "f1df53d2843c8643d56d637ce1de242037613ab8" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Oct 06 15:51:41 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Oct 20 18:07:37 2011 -0700" }, "message": "mfd: pm8018: Add PM8018 ADC resource\n\nChange-Id: I6a4df32671b95070cdb719d80767f0ffde8cd40a\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f49d99bc4168c7937655bb09989cc72525163b40", "tree": "ad0c9564e7bb8b3e845917440ee34578fb8f5e51", "parents": [ "a21ec56a1e1d13b1cc3a6f62a39c2be49c450747" ], "author": { "name": "Amar Singhal", "email": "asinghal@codeaurora.org", "time": "Mon Aug 22 19:02:04 2011 -0700" }, "committer": { "name": "Amar Singhal", "email": "asinghal@codeaurora.org", "time": "Thu Oct 20 14:35:49 2011 -0700" }, "message": "rq_stats: Doing rq_stats calculation in the scheduler tick.\n\nWith this change, we do the average run queue statistics calculation\nin the scheduler tick itself. This helps avoid any extra timers to\ndo the same. Also doing this calculation in the scheduler tick avoids\nany bias if the calculation is done in a workqueue\n\nChange-Id: I854d90acc05cc7a7226487be5555976826d8c837\nSigned-off-by: Amar Singhal \u003casinghal@codeaurora.org\u003e\n" }, { "commit": "e3316a10982cfd753c9824abe249c2096d4f68e3", "tree": "4d94a4860f749cd52b0eab26cca3e46e7c2c0c99", "parents": [ "39025fee42f6926aba0a213fb7fdd90633bc5cfd" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sat Oct 15 06:05:17 2011 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Oct 21 00:15:27 2011 +0530" }, "message": "USB: EHCI: msm: Configure GPIOs for HSIC strobe and data lines\n\nAs part of HSIC initialization, in addition to enabling HSIC host\nmode and periodic pad calibration, need to configure GPIO150 and\nGPIO151 pins for HSIC strobe and data lines respectively for\nproper data communication between HSIC devices.\n\nChange-Id: I7cdf8e4532045d813ac6c6e3f53455d0a640245b\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "39025fee42f6926aba0a213fb7fdd90633bc5cfd", "tree": "75e9be5957b522a0804e4dbf41552a23f7984c18", "parents": [ "c60c2d46299ec789b639c9b0e7dc82f130fa6603" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sat Oct 15 05:55:10 2011 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Oct 21 00:14:26 2011 +0530" }, "message": "USB: EHCI: msm: Add support for HSIC based Host Controller\n\nThis patch adds support for EHCI compliant USB Host Controller\npresent in MSM chips. This Controller uses an HSIC PHY which\ncommunicates with downstream devices using STROBE/DATA lines.\n\nHSIC is a supplement to USB 2.0 specification and is preferred\nfor chip-to-chip interconnect (having maximum circuit length of\n10cm) as it removes the analog transceivers.\n\nChange-Id: Id54dcc802e606e0ff7dd31bc64671a797cd8bc09\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "4b99172a1df8b1ad2b48343bead39685f294e680", "tree": "90acfd6620722181a3b3f5b90c26c7d076207fe0", "parents": [ "7a6e8d148f0e55c82cc9294c1d1978d613ba5e19" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Fri Jan 28 13:24:34 2011 -0800" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Thu Oct 20 09:33:32 2011 +0530" }, "message": "msm_fb: display: CSC Matrix update support is added\n\nCSC Matrix update support is added for MDP4 VG pipes\nto convert Ycbcr -\u003e RGB format\n\nCRs-fixed: 313601\nChange-Id: Ib6fb8f2eab4b1e871a406a3a2d7274fcfdcdd9d1\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "fb8e3c1d0c97219d251f4a3b2d90c2daad3d79a5", "tree": "4c9c261780eccf28d86148ed1883d8ec0ca2a1f2", "parents": [ "a21ec56a1e1d13b1cc3a6f62a39c2be49c450747" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Wed Oct 19 17:29:42 2011 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Wed Oct 19 17:29:42 2011 -0700" }, "message": "diag: Add support for APQ8064\n\nThis change will add DIAG support for new target APQ8064.\n\nChange-Id: Ic8d21dc39e42fc254f71ee62df8160641c8068f8\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "17607d277ee963f86a4f60ad6c0de37af932605b", "tree": "e5bc85db0d659edaead95922bfd5ab36fb282937", "parents": [ "842868ef3dbb2cbd3d52c810ace73fb2a8006e7a" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Oct 05 10:36:20 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Oct 18 09:22:12 2011 -0700" }, "message": "hwmon: pm8xxx-adc: Add PM8018 ADC Driver\n\nPM8921 and PM8018 have a common ADC module. Difference\u0027s\nare in the channel supported on individual PMIC\u0027s and\nin the MPP mapping to the ADC device.\nMPP configuration on PM8018 is not required. The MPP\nis directly connected to the AMUX pre-mux channel.\n\nChange-Id: I9aed3366f20e3985962119274d8b2865b7054a79\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "d02d1db765e82e8728a3a478abfbf0d05e180e8f", "tree": "aa498cb18a8049430eb9e06fbf0084fe093f1549", "parents": [ "5863bbb7bd12625d2639f6eee2b7a81cb347c8d2", "d66c9d51b264b66f7130eb7f310f09fce4b37039" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 17 03:47:33 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 17 03:47:33 2011 -0700" }, "message": "Merge \"drivers: rtc-pm8xxx: Fix automatic wakeup of APPS due to RTC alarm.\" into msm-3.0" }, { "commit": "9d9cdc218cd4fe64cb94ba23fcfca394f2da4b5b", "tree": "1b2bf8c5c73677966010811b1e54281239f3cb24", "parents": [ "b65f532893c362c77afd8e4eec01847b9962318f" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 10 17:17:07 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 17 12:53:07 2011 +0530" }, "message": "msm: Add msm-ssbi devices for PM8058 on supported targets\n\nSupported targets are msm8660, msm7x30 and fsm9xxx\n\nChange-Id: I1d21b73ba67c6769441658e648c32204c72754d3\nAcked-by: Kaushik Sikdar \u003cksikdar@qualcomm.com\u003e\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "d66c9d51b264b66f7130eb7f310f09fce4b37039", "tree": "13dbf9d3b876b1b8031e85e8f83286ec009c1334", "parents": [ "58522b6c825ce37b9e27f8244c62c7e64e684eb6" ], "author": { "name": "Ashay Jaiswal", "email": "ashayj@codeaurora.org", "time": "Thu Oct 13 17:41:40 2011 +0530" }, "committer": { "name": "Ashay Jaiswal", "email": "ashayj@codeaurora.org", "time": "Mon Oct 17 11:08:37 2011 +0530" }, "message": "drivers: rtc-pm8xxx: Fix automatic wakeup of APPS due to RTC alarm.\n\nAlarm interrupt causes automatic wakeup even when the phone is in\npowerdown state.\n\nChange-Id: If3ae30304adba4f07284a3dc496956d67a1ae1b0\nSigned-off-by: Ashay Jaiswal \u003cashayj@codeaurora.org\u003e\n" }, { "commit": "61e816424bea2b9cd705750b06661a6635e6bbba", "tree": "2f682f928bd309772451d301ee2d08dff803c8bc", "parents": [ "b46f4157ba20f9d66c0cf9cf6d8e456a4934a9c3", "cffdff53548ba88cea099a653e104003225607f2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Oct 15 12:53:35 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Oct 15 12:53:35 2011 -0700" }, "message": "Merge \"Kbuild: Add ion header file\" into msm-3.0" }, { "commit": "cffdff53548ba88cea099a653e104003225607f2", "tree": "2cfcc607f2575c965d9b0b0753ce5f5b65bd60b0", "parents": [ "3ce4a81bc3dd15cbb371246ad0daa909346ff0bd" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Sep 23 10:40:19 2011 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Sat Oct 15 11:56:54 2011 -0700" }, "message": "Kbuild: Add ion header file\n\nMake sure the header file for Ion gets exported to userspace.\nAlso make sure userspace can actually use the header.\n\nChange-Id: I44f436005a6a503811c85d4fb0f89264ba160571\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "2ea4f046c594d263397e928314cfee8079f43bac", "tree": "25700367d4d7ce6de504507ed22379a5db02a91b", "parents": [ "7e0f01680ab59dcbbcd6492d1d66cdfa7973a770", "3b46d001e2e4f4aecd2de96e0950dbebdf4f96a3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 23:04:38 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 23:04:38 2011 -0700" }, "message": "Merge \"msm: kgsl: Add idlestats sleep event notification\" into msm-3.0" }, { "commit": "e69add446bc5d1a9dc2a1c96b185e4f1d606d24e", "tree": "61ffe94fd166e1554063f91b5ec63e637b822eb5", "parents": [ "2630a1fc62258c0e1005278b99e73dbfa9c6f0c9", "0123d183c4e5edcbecf72ffbfeec0a89d2cdfb69" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "message": "Merge \"msm: kgsl: make kgsl msm_bus votes more readable\" into msm-3.0" }, { "commit": "3b46d001e2e4f4aecd2de96e0950dbebdf4f96a3", "tree": "a4d957cd22280a395984abc0110f417c7a67aef1", "parents": [ "76c5182cd20e8421fdfa75f92b4f153dcabea963" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Tue Oct 04 16:26:38 2011 -0600" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Oct 13 15:57:20 2011 -0600" }, "message": "msm: kgsl: Add idlestats sleep event notification\n\nChange-Id: Ie632d3f44661575ad8c7b41f064eff5f3b068f62\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "0123d183c4e5edcbecf72ffbfeec0a89d2cdfb69", "tree": "9b5af401ae4713782a27da7379b4145dfb074adf", "parents": [ "76c5182cd20e8421fdfa75f92b4f153dcabea963" ], "author": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Fri Sep 30 14:59:06 2011 -0700" }, "committer": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Thu Oct 13 14:46:38 2011 -0700" }, "message": "msm: kgsl: make kgsl msm_bus votes more readable\n\nChange-Id: Ia8de770d0891a078d9b2dc16b8ce541a4820b003\nSigned-off-by: Suman Tatiraju \u003csumant@codeaurora.org\u003e\n" }, { "commit": "9b4a6be7c466f5462adc28ee9c66797113a8466e", "tree": "6ac712c62ddf0a1d00cf4221f7b91a669e24afc2", "parents": [ "18db86ad26d024e5224a53e443eea785fe4a0b2d" ], "author": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Mon Oct 03 17:19:20 2011 +0530" }, "committer": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Thu Oct 13 22:03:39 2011 +0530" }, "message": "msm: rotator: Add YV12 support in the Rotator\n\nAdded changes to support YV12 input format in the Rotator.\nOutput will be Pseudoplanar in this case.\n\nChange-Id: Ic77ad2b6a3aaa66ad923494fb6c96e07738d674b\nSigned-off-by: Pradeep Jilagam \u003cpjilagam@codeaurora.org\u003e\n" }, { "commit": "d7cb92f92909a0b920530a4eaa1e2337e583baaa", "tree": "43cb6399bc46a97e938b71957ab4fcd49c0ebc78", "parents": [ "6cebee06fa90a2478e6ad713ba53dad025ae3895", "69890aa09a70bf8c57c2d1f287b932343a85c8d5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Oct 12 19:55:56 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Oct 12 19:55:56 2011 -0700" }, "message": "Merge \"diag: Add UART support\" into msm-3.0" }, { "commit": "abcb6f740ef17dcf13979be828ab0d1435824d3a", "tree": "fce0bdbc4a25913368d4128b2bc525925357af8e", "parents": [ "29e31c3659ad0e0bf601026a7f8e1d7eacd97dbf" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Oct 04 16:26:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:30 2011 -0700" }, "message": "gpu: ion: Add cache flushing APIs\n\nAdd ioctl to support flushing the caches of ion\nbuffers from userspace.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "8994e39bcddda72463b94bdd64fe598c33d6c53d", "tree": "aae5ea0b81847e42532887353ff3bcda772afd51", "parents": [ "0a42d696b56d337b04cc3484d8ec9b702c3459aa" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Wed Sep 14 18:20:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:29 2011 -0700" }, "message": "leds-pm8xxx: Pass LED flags from board file\n\nInstead of hard coding the flag into led driver, pass it\nfrom board file.\nWhile at it, re-factor the code to separate led upstream\ncore data with board specific data.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/pm8921-core.c\n" }, { "commit": "354120303af200a1515eca4869a4fe2ac558888c", "tree": "405ca86a3a1439ba006ee587de0eb98a89418b70", "parents": [ "2fee20e30bb5fa63e2c9d939584114224deb47e6" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Sep 29 09:50:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:25 2011 -0700" }, "message": "gpu: ion: Add IS_CACHED macro\n\nAdd a proper IS_CACHED macro for detecting whether or not\nflags indicated a cached mapping.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "69890aa09a70bf8c57c2d1f287b932343a85c8d5", "tree": "2ccd47d1d918e055167dce653a67b6f279522065", "parents": [ "550aa1ab4be6af8caab655a5eac88cbe07040ee7" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Oct 10 12:59:16 2011 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Oct 10 13:21:41 2011 -0700" }, "message": "diag: Add UART support\n\nDIAG traffic has been supported over USB and SD card. This\nchange adds capability to route DIAG traffic over UART.\n\nChange-Id: I0d6732fcbb19950700218140d581b5759e676b74\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "93d79ecd11a79a097a5c051438d9c3502902af6e", "tree": "47326b900e05c681370345c444278145ffd582a4", "parents": [ "738b458d5dddd549a422fb7b9052e2938d510694" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Sep 21 16:52:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:56 2011 -0700" }, "message": "ks8851: Add GPIO configuration platform data\n\nAdd platform data for the KS8851 SPI Ethernet device to\nenable proper GPIO configuration for the reset and\ninterrupt pins.\n\nChange-Id: I79adae4628f38a2ca5bc17825258c41ab5e1623d\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "4acbdd5c375ec73e0fad73d9d62cc8afccfb2b48", "tree": "f9c81fc5a60fad15be9edcfac45f943afc6c26f5", "parents": [ "eb9e60dc8e78dd7a3bbf707c435da23b260aec9b" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Sep 16 17:09:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:50 2011 -0700" }, "message": "mfd: pm8xxx-pwm: add two APIs\n\nThese new APIs allow a driver to specify its PWM period,\nand raw PWM values separately using chip specific\nparameters.\n\nChange-Id: I3e9860f30a50d4f3d9c556133761d51858d2a2e3\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "0f0242353fd07efb98738dcd883a6eca9305bb5e", "tree": "734d603bcfed8f9d10e28f78f4a414042b2b1d4a", "parents": [ "21ebadd5df60c627e36cd4d30c2cff43e0ba4024" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Oct 03 12:00:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:36:45 2011 -0700" }, "message": "power: pm8921-charger: config cold/hot threshold\n\nPmic 8921, has configurable hot and cold battery thresholds as\npercent of VREF_THERM. Provide means to configure these via\nplatform data.\n\nOne has to set the config values in the charger platform data defined\nin the board file.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "fad7235d01a1a8fbc3649529117eba2a86414726", "tree": "8c5fa8f1bcaca982f01814080878ea9e9775e692", "parents": [ "5ba505a1b2b85172f8b1d62db639894c8a0ab40e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Sun Sep 25 23:06:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:35:51 2011 -0700" }, "message": "power: pm8921-bms: calculate real_fcc\n\nreal_fcc is the remaining capacity in the battery when the charger\ndriver indicates that the battery is fully charged. This value needs\nto be calculated when charging ends with a fully charged battery.\n\nThe userspace can read this value via module parameter and preserve it\nbetween restarts.\n\nThe real reason for calculating this is to indicate how much the battery\ncapacity has dropped w.r.t the profiled battery data use this deviation\nin calculations.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "767fdda6e12ab7810a910036b52fa3f330afef76", "tree": "0d5cab415de8952c6de04ae6ea32def059dd2db9", "parents": [ "c1824d5b833848cd1a01a3ca526a38da6a20a12c" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Mon Aug 15 15:49:45 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:34 2011 -0700" }, "message": "msm: kgsl: Introduce Iommu Code\n\nkgsl now supports the use of 2 types of MMU. One is\nthe GPU\u0027s internal MMU and the other is IOMMU. Both\nMMU cannot be active at the same time. The MMU type\ncan be selected at compile time via config option.\nA boot command line parameter can be used to override\nthe type of MMU selected at compile time.\n\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "77d106ea896f3c77515fb982e35c96d0861d8928", "tree": "42bd300a872239ec3dd2d7efe2b919fac4062b6d", "parents": [ "43e46a32dec07e5179fda7400b77b16c81b70d88" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Sep 20 16:25:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:12 2011 -0700" }, "message": "hwmon: pm8921-adc: Add sysfs interface\n\n-Add sysfs interface to read PM8921 HK/XOADC\nand thermistor temperature measurements mapped\nthrough MPP\u0027s.\n-Move PM8921 ADC from directory /drivers/mfd to\n/drivers/hwmon for userspace clients to read ADC\nthrough hwmon.\n\nCRs-Fixed: 302365\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/Kconfig\n" }, { "commit": "0b9e51735ead59494b60b2040d197ab24e312698", "tree": "71b6cc0cac6b061e5b927f80ff75f26ab39419ab", "parents": [ "6066a843dcf6d3b6b9231c76aae3f82bc159367e" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Sep 29 18:54:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:13:56 2011 -0700" }, "message": "thermal: tsens: Add support for MDM9615\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f9cfa8ebfab2152b111432003bc7b749de6341f9", "tree": "5f86a3e8c5507e94c820cab27ecd19b0702f8593", "parents": [ "133aa41ecc2ff8689f58857a71c19cf90fe035b6" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Fri Sep 23 14:29:11 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 09:50:33 2011 -0700" }, "message": "msm: remote_spinlock: Add support for hardware mutexes\n\nAdd support for hardware mutexes.\n\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "02eff13c45b19505ddba49911a089ef5f238ca25", "tree": "e4bd7a5411434a4a73bf5d97b277ee0d4b1c813c", "parents": [ "d98328ef478ee964aa9ac48c88a43356dc320404" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Wed Sep 21 16:46:24 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:35 2011 -0700" }, "message": "usb: otg: Add usb_hs_system_clk to OTG driver for MSM9615\n\nThis change add usb system clock support to OTG Driver.\nSystem clock is a 60MHZ input clock to the USB ChipIdea core.\nThis clock is required starting from MDM9615.\n\nThis change also removes the enforcement for using a phy_reset_clk\nfor reseting the PHY. Starting from MDM9615, PHY reset is not implemented.\nThe core is reset together with the PHY using \"usb_hs_clk\" signal.\n\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "d7e02d4d604fd96b16f63693bf1da23b51bed6a5", "tree": "cf11692c850db3f4025def4d771790ef0a3bf6d9", "parents": [ "e0b11453c13df0fd79848fa05b1a95b6479f2ca2" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Mon Sep 12 20:31:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:33 2011 -0700" }, "message": "tzcom: Implement abort and cleanup of driver\n\nAdd a new IOCTL call to the driver to properly\nabort all threads blocked on wait queues. Updated\nrelease call for proper cleanup.\n\nCRs-fixed: 303637, 304152\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" }, { "commit": "1097519e8b6a0404f45a1cb60b2101fa875faebd", "tree": "4b90f6550aba7921b97a0e7645002b73cabd49fd", "parents": [ "9c25f07a709f3e8ad4a22974d1dd7c53d613430e" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Sep 23 19:16:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:25 2011 -0700" }, "message": "mfd: pm8xxx-irq: Set unique dev id for sys device\n\nUse device id passed from platform data to register\nfor sysfs.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/pm8xxx-irq.c\n" }, { "commit": "55208e6c57cc01f342367f6317398474bcf6ec9c", "tree": "8d2e19a52f3c893d6c9fe7711ea07d82d165da72", "parents": [ "4296f37603322a47b30e585422813fc4743f4298" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Sep 21 10:20:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:12 2011 -0700" }, "message": "thermal: tsens: Add platform information for 9615\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "0f063b8670c045c16717b42180abc288c900f8a4", "tree": "0be0c4c1ac66fa5ee68dc59f8f2958b48d386b36", "parents": [ "98738c5176b98e735b3b9bb24d1a2b453d57112b" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Mon Sep 19 17:44:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:08 2011 -0700" }, "message": "mfd: pm8921-adc: Add configure and read from MPP ADC\n\nSupport configuring a MPP to pre-defined AMUX6 channel\nwhich is used for dynamic mapping of the MPP-AMUX channel\nfor clients having multiple MPP\u0027s to read ADC.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "33fe6fb63c6f0f16f561efbe1027ad45ba4e3241", "tree": "0216b31bb98c84b9cbf083319386e170ccd4b5bf", "parents": [ "325bdc9937bf30efbdc0331290d4efed8c15f431" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Sep 14 16:03:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:06 2011 -0700" }, "message": "power: pm8921-charger: update userspace per update_time milliseconds\n\nThe userspace should be updated periodically to update it with the\ncharging progress.\n\nCreate a delayed_work and schedule it every update_time milliseconds\nto notify the userspace that power supply changed. The userspace\nis then supposed to read the power supply properties and know about\nthe charging progress.\n\nCRs-Fixed: 305572\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "325bdc9937bf30efbdc0331290d4efed8c15f431", "tree": "97539a050a2e226abc1981c7a708eb0fe9cf04c5", "parents": [ "b936792900f41c4234ad0cddd55afcd6922628b8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Sep 07 20:45:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:05 2011 -0700" }, "message": "power: pm8921-bms: report FCC\n\nSince the BMS can calculate FCC based on the charge cycles and age, use it\nto report ENERGY_FULL property in the power supply framework.\n\nCRs-Fixed: 304029\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "33f34449d2e2f69f5a7bd278040f2399bbc2cf6b", "tree": "142202ca25a1590f2665a8845fd1f448c4fcf15f", "parents": [ "dd0bde3ae7bddcc315069ce59ddbfbe5455b1bfd" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Mon Aug 08 16:22:03 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:58 2011 -0700" }, "message": "slimbus: Add clock pause support.\n\nClock pause message informs all devices on the bus that the active\nmanager having framer device pause the bus. This allows stopping the\nclock to conserve power.\nClock is paused only if there are no active data channels on the bus\nand no response is pending for any READ message.\nSlimbus framework wakes up the controller using a wakeup function\npointer. Controller should then program the active framer to be out of\nclock pause.\n\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "73787fae48db33ab8471452c175780f2caa3a856", "tree": "00f4bc244128f0b38b05238814ee9bf2243fb0b4", "parents": [ "ee31ae9d8af98e52b7b23aaf071c5bc2143be877" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Fri Sep 09 15:14:20 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:56 2011 -0700" }, "message": "misc: isa1200: Add regulator support\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "6d565fdf7a968c6969afb5208f02ac80ee781215", "tree": "64ccb72d7c15f909d632d58f0b77275b7359eaab", "parents": [ "604c6475cab537eac382f9aa083ef843007c911e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Sep 15 18:49:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:55 2011 -0700" }, "message": "msm: restart: Handle reset interrupt from pmic\n\nThe reset interrupt in the pmic indicates the pmic will shutdown\nthe msm in few seconds - it does so by lowering the reset_n line\nto the msm.\n\nWhen this interrupt is triggered it is required that no more ssbi\ntransactions are initiated and the msm should cleanup and prepare\nfor the impending shutdown. There is no need to lower ps_hold in\nthis case as the pmic will shutdown the msm regardless.\n\nAlso since we don\u0027t want any ssbi transactions, force shutdown\nnonboot cpus. This will prevent ssbi transactions to the pmic for\nlower/raising nonboot cpu\u0027s voltages as they enter/exit idle states.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "20ec38a9ae268e10f6cc4440ae543bd9e03becb1", "tree": "b1d5edc670f3e401d52c748191d0b9a08edd7ca6", "parents": [ "55f2a62dff1b7a0fc9f6ce04a574b4d7a47b33cc" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Wed Sep 14 10:51:28 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:28 2011 -0700" }, "message": "msm: idle_stats: Make idle_stats_device.h userspace accessable\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "e922bbba5c9379fe63c1b6a1aa5fc7ab40df8a1c", "tree": "262150ff04d1fa43336d4f3f423f8b839002c08e", "parents": [ "daf1d2101d21f27ed21dbc8e9afe9e82f24083c2" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Sep 01 13:05:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:20 2011 -0700" }, "message": "power: pm8921-bms: use battery data based on battery id\n\nCurrently the battery data is passed via the board file. Instead\nread the battery id and choose the appropriate battery data to use.\n\nCRs-Fixed: 304376\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "9f9ece38d5b86d6429e7d14b21586df9396ed871", "tree": "825a109c5b7b4ae2d0b86a317992e177718bfa35", "parents": [ "e05fc4d4b77c22352e2ef61b4a07715878f9612e" ], "author": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Sat Sep 17 23:23:25 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:16 2011 -0700" }, "message": "hwmon: msm_adc: Add stub function\n\nAdd stub function to allow client\u0027s code to avoid ifdef.\n\nSigned-off-by: Amir Samuelov \u003camirs@codeaurora.org\u003e\n" }, { "commit": "a0f5121b963d156bedec134badbf588aae0d7afc", "tree": "ab5da27f7dd537901ff9179fff392914386625d7", "parents": [ "3893bf924bb095636fc4bac26f844eb8aa7f1c6d" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Sep 13 17:49:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:09 2011 -0700" }, "message": "mfd: pm8921-adc: Fix scaling and PM8921 MPP ADC read\n\n-Modify the existing PM8921 ADC read api to include\nreading ADC mapped to devices on the MPP.\n-Modify scaling function to support XOTHERM and PATHERM\non PM8921.\n-Remove post scaling functions for external charger\nas its not used on PM8921.\n\nCRs-Fixed: 307164\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "b909f239f1258313620847af9401224f7e2455e0", "tree": "553a3ec20bcc53512d0d35ff7fa1a6c4f14f9352", "parents": [ "34dd32ce2c308ff3071f9c5f0b73a5f77cdbd4bd" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 29 10:52:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:06 2011 -0700" }, "message": "mfd: pm8018: Add support for PM8018 regulators into PM8018 core\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "34dd32ce2c308ff3071f9c5f0b73a5f77cdbd4bd", "tree": "71f6f595103a4e8287746d0c381296b3c8204a57", "parents": [ "99a6f3973b41cf57254fbbe647dae3af0aaf1f30" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 29 09:22:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:05 2011 -0700" }, "message": "regulator: pm8018-regulator: Add regulator driver for PM8018\n\nCreate a regulator driver to control all regulators on the Qualcomm\nPM8018 PMIC chip. This chip contains several different types of\nregulators with a wide range of abilities and voltage ranges.\n\nFive different regulator types are available on the PM8018.\n\nPLDO - PMOS low drop out linear regulator\nNLDO - NMOS low drop out linear regulator\nNLDO1200 - 1.2A NMOS LDO (different control structure than other LDOs)\nSMPS - switched-mode power supply\nVS - voltage switch\n\nThe driver interfaces with the PMIC using Qualcomm\u0027s SSBI bus.\nCalls to this bus are abstracted through the pm8xxx_readb/writeb API.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "fdefdf941f500d41e1d096faba4dd4b45d70f616", "tree": "9466cee22d35b9b2adcb244d9e9d3ecc3709c31e", "parents": [ "1a4611182f9b104d7caebcb508829451037d6368" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Sep 08 14:18:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:04 2011 -0700" }, "message": "mfd: pm8018: Add PMIC 8018 core driver\n\nAdd support for the Qualcomm PM8018 PMIC chip. The core driver\nwill communicate with the PMIC chip via the MSM SSBI bus.\n\nInitial support is provided for: IRQ, GPIO, MPP, RTC, Power Key,\nMisc, and Debug\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "acd24260ac4c8adb5b672b5db1588516a315dce2", "tree": "73a848388d68e4f04fb8e899f004c7c2295fea8d", "parents": [ "8fa3eb6570e66427d85b87b447c9bbdcc37fbaf9" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Aug 18 11:19:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:52 2011 -0700" }, "message": "thermal: msm: Update TSENS for 8960_V2\n\nTSENS V2 supports reading from multiple sensors and\nnotifiying clients when the lower/upper thresholds\nare reached. The lower/upper threshold use the last\nsensors threshold that are set through the thermal sysfs.\nTSENS HW is enabled only when the main sensor is requested.\nThe TSENS block is disabled if the main senors is disabled\nirrespective of any other sensors that are being enabled.\nWhen TSENS receives notification on temperature threshold\nbeing reached, it checks and sends events to the sensors\nthat are enabled and whose thresholds are above the upper\nor below the lower thresholds set in the tsens threshold\nregister.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "4ac053cdb9893a85c1d28afa8a1f80f139fa7bdd", "tree": "df84187808901bdfeb7d7308a03ecf5ffe9e4762", "parents": [ "339aadf4a78a4dedb10e4f5a40bcca742a25dd20" ], "author": { "name": "Iiro Valkonen", "email": "iiro.valkonen@atmel.com", "time": "Thu Sep 08 11:10:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:35 2011 -0700" }, "message": "Input: atmel_mxt_ts - Make wait-after-reset peroid compatible with all chips\n\nThe delay before the chip can be accessed after reset varies between different\nchips in maXTouch family. Waiting for 200ms and then monitoring the CHG (chip\nis ready when the line is low) is guaranteed to work with all chips.\n\nv4: Adjust delay depending on the family ID of the chip. Also add a readback\n of command register after backup is issued, to make sure we are not\nproceeding\n too fast there.\nv3: Add a check for NULL read_chg() function, and add the read_chg() to platform\n files using this driver (currently only mach-goni.c)\nv2: At Dmitry\u0027s suggestion, add a timeout so we are not stuck looping\n endlessly in case the CHG is not going low.\n\nSigned-off-by: Iiro Valkonen \u003ciiro.valkonen@atmel.com\u003e\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "ecdd1004ead02409d6adb93a0c12320954116d8a", "tree": "e037f18969f28acd100928c730c62a0290ab5062", "parents": [ "1fc44074b021d432e09ebcb60317dcbbf569c4f6" ], "author": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Fri Sep 09 10:52:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:30 2011 -0700" }, "message": "wcnss: PM un-register API for Riva platform driver\n\nThis API will be called by the host drivers to un-register the PM APIs\n\nSigned-off-by: Sameer Thalappil \u003csameert@codeaurora.org\u003e\n" }, { "commit": "ff2d366f21bf5ec2748e890fc15966932f5fd981", "tree": "27acca3a8ba169a77aa03f8580afab84aed4c5bb", "parents": [ "ab34ca44fcf6d9dd34eeb23ad0d282799b659fe6" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Aug 31 17:13:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:28 2011 -0700" }, "message": "drivers: iommu: Add flags to iommu_domain_alloc\n\nAdd the ability to pass flags into the iommu_domain_alloc\nfunction to specify domain attributes.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "ad74236b904ce758b32aad1c31a29d434975a1e4", "tree": "014332a527f77fe94179f8a048a64853b53ccf08", "parents": [ "bc1f0e4bff78efda09639f0a4c5123acba0b4ebd" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 29 19:50:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:33 2011 -0700" }, "message": "power: pm8921-charger: implement thermal mitigation\n\nImplement thermal mitigation in the charger driver. The userspace\ndaemon can get the battery temperature from\n/sys/class/power_supply/battery/temp\n\nand set the mitigation levels on\n/sys/module/pm8921_charger/parameters/thermal_mitigation\n\nThe battery driver supports 4 levels [0 through 3]. O being normal\nand 3 being extreme thermal mitigation.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "24fc9b6b90a8e1856f64b449a0cfcd00da20aea0", "tree": "745af0b0abd69df571a89617833d63ff5eedb625", "parents": [ "1e99fcb8cd53eddbce2fc72f9f8aefbb7a0beb41" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Jul 18 10:51:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:11 2011 -0700" }, "message": "mfd: 8821: Add support for pm8821 core driver\n\nAdd support for the Qualcomm PM8821 PMIC chip. The core driver\nwill communicate with the PMIC chip via the MSM SSBI bus.\n\nInitial support is provided for: IRQ, MPP, and Debug\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "719c676f024c8abedecaf2b193023bc3c1e2859d", "tree": "95207aee5f93606d360030e6e95c0cf9eb1b4458", "parents": [ "f12acf5c86e131c638f1ec6eb09294ad82f82df1" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Aug 25 11:03:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:57 2011 -0700" }, "message": "mfd: pm8xxx-pwm: split pm8xxx_pwm_config to smaller structs\n\nA big struct of pm8xxx_pwm_config is not easy to manage. Split it\nto smaller structs and make the period struct public.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "894fd58ea83d1f1c38269590cfdff6551b872f9e", "tree": "58772e8d71cdb9692f24c494c62aec3d921557a9", "parents": [ "d6183793419fa8a88d3e91c2dfa321dc13bf0c6b" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:33:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:38 2011 -0700" }, "message": "gpu: ion: Add support for cached and uncached mappings\n\nAdd explicit support for cached and uncached mappings. Functions\nnow describe whether mappings will be cached or uncached.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "0b1345ebd586363a51c7a380fb3e7b3f6d81b445", "tree": "eb9658765242dfb0a58826febf00f88a0dc7fc33", "parents": [ "7a6a34fb26f959fcbad55c9450819d79015a6f2e" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Aug 11 19:32:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:27 2011 -0700" }, "message": "drivers: iommu: Add map/unmap range ops\n\nAdd IOMMU ops functions to allow mapping and unmapping\nwhole ranges of address space based on a scatterlist.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "30bb6c435a3906b813919cf89ae932c9f3d9966d", "tree": "7b0f0d90d066fa961fa8e823e7557c589deb9eb2", "parents": [ "3d321a35703d041a11f25f7abc27cc6c1ef8cd13" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Aug 31 13:02:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:26 2011 -0700" }, "message": "Revert \"8060: wlan: Enable wlan on dragonboard\"\n\nThis reverts commit e0fb57d5ba0dbbb79e2193c4f7bba377bbf25154\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "3d321a35703d041a11f25f7abc27cc6c1ef8cd13", "tree": "8f50edefa4a485dd56b40d5631038f8816a84f4c", "parents": [ "20a9bf2d18b3170d7daca4e35be53726a00e13bd" ], "author": { "name": "Maya Spivak", "email": "mspivak@codeaurora.org", "time": "Fri Jul 08 11:26:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:26 2011 -0700" }, "message": "cpu-hotplug: Add the function \u0027cpu_hotplug_inprogress\u0027\n\nAllows a caller to detect whether a cpu hotplug operation\nis in progress. This is useful for optimizing code paths\nbased on this condition.\n\nSigned-off-by: Maya Spivak \u003cmspivak@codeaurora.org\u003e\n" }, { "commit": "de4cefb00960665e40b286e84e3d3735307488a2", "tree": "b252958886acd1e1ec5c3652bdbb7f95c0e98fd0", "parents": [ "9a901fd3057954d71bc96a51393727ca1df4b532" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Aug 04 18:10:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:22 2011 -0700" }, "message": "board: msm8960: Add low current LEDs\n\nAdd two low current LEDs with low power\nconfiguration and default trigger\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "a2e9363f069768597687ecd3436d331fc3c1ceb1", "tree": "22b410b0a8c19f51c28da6b84b809de3c0043b44", "parents": [ "302911d5ba5cdb2ed344e0156e10bfba5e1248e1" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Aug 19 13:36:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:21 2011 -0700" }, "message": "gpu: ion: Add support for carveout heaps on msm targets\n\nAdd infrastructure for supporting ion carveout heaps.\nThe memory type should be specified in the board file using\nmach/ion.h. The ion platform driver will be responsible for\nallocating the correct memory.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "302911d5ba5cdb2ed344e0156e10bfba5e1248e1", "tree": "7668dfac798813fd32464060fcb76b10078b8699", "parents": [ "c46636308ea645b5e555955f3679bea6a01001a8" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon Aug 15 17:12:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:20 2011 -0700" }, "message": "gpu: ion: Add platform driver for msm ion\n\nAdd platform driver for msm specific ion devices\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "5578bdb65df40de60c47f87be1f62a2ea332e973", "tree": "4c679ef2ae6875959946b733b789c63aa9beb851", "parents": [ "d783499ad3e5835568711cfcc009994e1db00a81" ], "author": { "name": "Joel Nider", "email": "jnider@codeaurora.org", "time": "Fri Aug 12 09:37:11 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:16 2011 -0700" }, "message": "tsif: tsif1 initialization bug fix\n\nWhen using CONFIG_MSM_USE_TSIF1 to enable the second tsif instance,\nthe device initialization failed because of a errant device ID. The\ncheck has been updated to accept the correct device ID range (0..1)\n\nSigned-off-by: Joel Nider \u003cjnider@codeaurora.org\u003e\n" }, { "commit": "1d17cf51b5592669a550c83d6974d325b66247b3", "tree": "b396272208c096496974faefcd2476a36b4f0217", "parents": [ "41f8fa330664879217c2fef2dd373446c9c650ca" ], "author": { "name": "Justin Paupore", "email": "jpaupore@codeaurora.org", "time": "Tue Aug 16 15:39:01 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:03 2011 -0700" }, "message": "regulator: Add regulator_bulk_set_voltage\n\nAdd a convenience API to set the voltage on multiple consumers\nstored in a struct regulator_bulk_data[] in one API call.\n\nSigned-off-by: Justin Paupore \u003cjpaupore@codeaurora.org\u003e\n" }, { "commit": "41f8fa330664879217c2fef2dd373446c9c650ca", "tree": "a284daa9b13276f41256e098c62433656a74eb53", "parents": [ "e0b55321970acbdefdeb5d2eff76ffd1b87861af" ], "author": { "name": "Sushmita Susheelendra", "email": "ssusheel@codeaurora.org", "time": "Wed May 11 17:15:58 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:17:02 2011 -0700" }, "message": "msm: kgsl: Add CFF user event ioctl to write data to cff dumps\n\nAdd the ioctl IOCTL_KGSL_CFF_USER_EVENT to write data to cff dump.\nDefine a new CFF packet cff_op_user_event for this generic user\nevent.\nWrite the surface parameter data packet and verify mem file\npacket to cff dumps\n\nSigned-off-by: Sushmita Susheelendra \u003cssusheel@codeaurora.org\u003e\n" }, { "commit": "a55500bdd4306bb9b61aeee3022f5f0c1b5114dc", "tree": "518657b40cd85cee74731223c854f9d9014039b2", "parents": [ "27663840be133c872ac5ecb4b7a76a788d3e095a" ], "author": { "name": "Wentao Xu", "email": "wentaox@codeaurora.org", "time": "Tue Aug 16 18:15:04 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:55 2011 -0700" }, "message": "msm: dsps: DSPS support for Sub System Restart (SSR)\n\nRegister handler for SMSM_RESET notifications and watchdog\ninterrupts from the DSPS. And add support for reset via\nIOCTL from user-mode application.\n\nSigned-off-by: Wentao Xu \u003cwentaox@codeaurora.org\u003e\n" }, { "commit": "6fe50a87c3d0d4b2bf9e7ba9e8c2749b155c5bbe", "tree": "0ecb468f1879588b40ee9c6761de394e36232dd4", "parents": [ "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 21:33:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:47 2011 -0700" }, "message": "power: pm8921-charger: api to control input regulation\n\nThe pmic charger can take measures such as reducing charing\ncurrent if the input charger voltage falls below certain point.\nCreate api to use this feature.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "26cef9c5c9191ab7bca6a23dbbbdca56d6db1690", "tree": "7d2ccaf217835095a738774c1b5186721e8e8eba", "parents": [ "86eea3087349a7c9d73d69912fd10648ec7f1c03" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 25 19:16:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: api to control trkl charging\n\nProvide mechanism to set trickle, weak voltage and currents via\nboard file. These settings are used to configure the hardware\ncontrolled auto trickle charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "86eea3087349a7c9d73d69912fd10648ec7f1c03", "tree": "5f18cd0bd862d65a9803a3ac07b0cbc2c557ec07", "parents": [ "93249a9485ee098b6e527e6f23dfc92686eb9e61" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Aug 15 13:55:18 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:46 2011 -0700" }, "message": "power: pm8921-charger: implement temperature control\n\npm8921 has a special hardware to monitor the battery temperature. Use\nthis block to program the cool and warm thresholds and reduce charging\ncurrent accordingly.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "93249a9485ee098b6e527e6f23dfc92686eb9e61", "tree": "deaee21201b188e6b405f94d78acfe7a3d4f0da9", "parents": [ "48bc4ee915717166ad735d852bd52491494086ce" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Aug 09 14:28:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:45 2011 -0700" }, "message": "mfd: pm8921-adc: Add BTM thermistor table\n\nBTM (Battery Temperature Module) thermistor lookup\ntable is computed based on the resistor divider\u0027s\nused on the board and the specifications of the\nthermistor. Its a function of temperature vs the\nADC code for PM8921 ADC and is used to set the\ncool/warm thresholds on the BTM.\n\nCRs-Fixed: 299646\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "be6bd8ce1ba1eab49caa79be898e947a38016e02", "tree": "b5857a00541931b1a3460ce787c7aa738b013f56", "parents": [ "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 19 12:15:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: add support for invalid battery\n\nUse adc reading on the battery_id resistor to check if a battery\nis valid. If it is not disable charging.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b24e2c3810f6eca4f8007ca2082c940ad7fbf8d8", "tree": "001e04f8cb0803b244899b9c9d9cc23a2d94dbf6", "parents": [ "485a053da3be033d26162c32329cec26aba68449" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Aug 17 17:13:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:39 2011 -0700" }, "message": "power: pm8921-charger: various apis\n\nImplement API\u0027s to\n\t- set maximum battery charging current\n\t- disable drawing current from the source\n\t- detect if battery is being charged and which charger source\n\t is charging the battery\n\t- get battery temperature\n\t- detect battery is present\n\t- detect usb is present\n\t- detect dc is present\n\t- set max trickle charging time\n\t- set max auto charging time\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "1f52c4141cf9f2c5d6a32918d056f93ce3897ef6", "tree": "990f14c5ae8a6621766592f7db0035ac9a61974a", "parents": [ "57dcfff1206da4b1f6e3cdbbc63b5c27d57ded24" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Aug 12 17:11:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:29 2011 -0700" }, "message": "power: pm8921-charger: add enable/disable api\n\nAdd api to enable/disable battery charging. This api will help\nstart/stop current flowing in the battery for charging purposes, but\nit does not affect the current the device draws from a charger source.\n\nCRs-Fixed: 300786\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "7f7de4f8f82ca83c74a8b8b1892ab1a48fd9e7e2", "tree": "091ce9cf90fafaad458eca77fd9f0b901bd4f541", "parents": [ "3652ed735ca19effa968b363b3d64750c41da042" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed Jul 27 10:29:01 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:28 2011 -0700" }, "message": "8060: wlan: Enable wlan on dragonboard\n\nDifferent values for pin_controlled need for dragonboard\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "a7423e433ea5736234c40e0341d7451af9a8fc15", "tree": "9f6b494c60420f55dee8c03c451de4647d03a697", "parents": [ "f23a2316e6ccd335f2559b354812aad3f1b2b25b" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Mon Apr 18 15:11:21 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:26 2011 -0700" }, "message": "msm: kgsl: cffdump syncmem ioctl\n\nThis ioctl is needed to track memory writes done from userspace\nso that this data is correctly captured in the dump.\n\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "72407e986ccbb768b85a1d58df1c4a0d0cbbcecf", "tree": "d282be00ac733e3fc40943f78e27653d39c8cae3", "parents": [ "4613ce4c372d594e14b8cd60af4c14ad09ab8497" ], "author": { "name": "Chuanxiao Dong", "email": "chuanxiao.dong@intel.com", "time": "Wed Aug 24 14:00:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:21 2011 -0700" }, "message": "mmc: remove MMC bus legacy suspend/resume method\n\nMMC bus suspend/resume was using legacy method. In system entering\nS3 patch, the suspend/resume function cannot be called since MMC\nbus also implemented the new suspend/resume method (dev_pm_ops struct).\nSo if dev_pm_ops is defined but .suspend/.resume callbacks not implemented,\nmmc_queue will not be suspended/resumed.\n\nThis patch will remove the legacy suspend/resume method and change to\nuse the new method totally.\n\nSigned-off-by: Chuanxiao Dong \u003cchuanxiao.dong@intel.com\u003e\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "3043fbaf3c938e70c6a5f587f86f6b653becc3c3", "tree": "f3275eab9f245ee097ba59a08a2eab0b981632fb", "parents": [ "ed246a9a919a2b040104410e555417a009215d5b" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Mon Aug 01 14:15:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:16:00 2011 -0700" }, "message": "ASoC: wcd9310: Enable platform-specific micbias configuration\n\nWCD9310 has four micbiases and each of them can be programmed to get its\npower source from one of 3 available cfilters. Each cfilter can be\nprogrammed to different voltage levels. Essentially, on WCD9310, a user\ncan have up to three different voltage levels to power various analog\nmicrophones and digital microphones. As it is now, micbias voltage level\nof WCD9310 is left to default value. Micbias and cfilter mapping is managed\nby codec driver. Different board design can have different micbias\narrangement. Micbias configuration of wcd9310 CODEC for 8960 CDP/MTP/FLUID\nis properly defined in this patch.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "727225f609791168016d9d7facae7a2cfdfce4f4", "tree": "d8aa5f424cf78516b878a7d8c0c251d29dad9d43", "parents": [ "ce1315aabcedc29e64b6719cfc963064a1780b4c" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Thu Aug 18 11:09:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:53 2011 -0700" }, "message": "input: cyttsp-i2c: Add support for disabling ghost touch detection\n\nAdd support to treat ghost touches as normal touches incase firmware\nreports all touches as ghost touches.\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "1316308eb30c2745c9b7a9b41017ceccc86315b5", "tree": "83887b90039592ecde1dddcdf331291b619da8b4", "parents": [ "a7a1c6b3d50e8a1e658dda6f18949c521b72c9a4" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue Aug 09 10:17:06 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:46 2011 -0700" }, "message": "msm_charger: Allow parameters to select default charger type\n\nAdded method to msm_charger to allow programming of max source\ncurrent. Created struct for platform data to be passed into\npmic8058_charger\n\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "8c78b13c9717032a60d9f8e8f35c8d729709da9a", "tree": "f9659dc2f3f81a1603e83ffadc80a68a4988f23a", "parents": [ "e96f66dd6b37316487cbc350ff55b3c9ad722248" ], "author": { "name": "Jordan Crouse", "email": "jcrouse@codeaurora.org", "time": "Thu May 26 10:27:47 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:37 2011 -0700" }, "message": "lib: Add debugfs file for tracking memory allocations\n\nAdd caller information to memory allocation calls and\ncreate /sys/kernel/debug/mempool/map to show the current set of\nallocations across all memory pools.\n\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\n" }, { "commit": "ef391acc67018666527ff306574cc56f6d103481", "tree": "4150de38564a6e856c581bbfb97812033746647f", "parents": [ "48aef6d5c2dbe622a0c44440809f4860ff7a5770" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Aug 15 20:27:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:27 2011 -0700" }, "message": "msm: rotator: Don\u0027t control rot_axi_clk explicitly\n\nIt is now controlled implicitly along with the rotator core clock\nfor all SoCs.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "a498e4d8256962b431843504f5df288509be5f20", "tree": "d58e20f2693683618c6a05ee516d5dfe7419305c", "parents": [ "d7b05e5bab087bac1b384623e2a4669b3c475424" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Aug 09 19:10:12 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:24 2011 -0700" }, "message": "input: atmel-mxt-ts: Add regulator support and init. callbacks\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "974a40d3c133b78db7e99404873336638f3f17b0", "tree": "e1bb4a8bc5734a49fff53ed431724c12bc80a726", "parents": [ "d2e2c49df21f0925749844fd6638b6317cd0ca12" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Mon Jul 18 15:08:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:21 2011 -0700" }, "message": "msm: audio: qdsp6v2: Change RTAC to use topology\n\nThis changes real-time audio calibration (RTAC) to use\ntopology ID\u0027s instead of device ID\u0027s.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "5b3641da981a6d6acdf2405cb554afc883e6a711", "tree": "8bb0463f5fbc0cdf0b89a184b16f3f8c72cbfc02", "parents": [ "ce74ba30f3a4fde873168b86fd14106cb3e49406" ], "author": { "name": "Neema Shetty", "email": "nshetty@codeaurora.org", "time": "Fri Jul 29 20:30:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:15:04 2011 -0700" }, "message": "msm: audio: qdsp6v2: Add PCM-WB support for VoIP.\n\nCRs-fixed: 297579\nSigned-off-by: Neema Shetty \u003cnshetty@codeaurora.org\u003e\n" }, { "commit": "6619d165ccab07bb8c5a4848dcd3fffdc3db1c2f", "tree": "2eb8c131b8329a6da7fcffb0ee487480bfc38df2", "parents": [ "a0f6b6758aea4909a2e37d29037316de9e148788" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Wed Jul 13 18:09:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:59 2011 -0700" }, "message": "Kbuild: Export Tabla register macro header file to user space\n\nGives audio acdb utility library access to Tabla register macros\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "b0039b03842b5657c8f27ef9031b9e1c6c82176e", "tree": "bf30c1d2b632aa8916063937426faf86c0a5f18b", "parents": [ "14dc2afb8f7793157a6b4ef67212ff7c753f4c2f" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Tue Aug 09 14:00:45 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:53 2011 -0700" }, "message": "wcnss: New mechanism to indicate external 48MHz XO option\n\nPlatform data is added to the WCNSS platform device to indicate if the\nboard containing the WCNSS device is configured with an external 48MHz\nXO. In addition a module param is added to the WCNSS driver to allow\nthe platform data to be overridden.\n\nCRs-Fixed: 288847\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\nAcked-by: Jeff Johnson \u003cjjohnson@qca.qualcomm.com\u003e\n" }, { "commit": "76d4db93666aabb4c53c180a30b7a8f96d404546", "tree": "bd437596a8445fe8a8049386796dbe2242198baf", "parents": [ "b208a74189b51e988135a921807b7c72bdbdb5a0" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jul 19 11:54:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:50 2011 -0700" }, "message": "power: pm8921-bms: Add calibration for hkadc\n\nThe output of hkadc calibration steps are voltages measured at\n0.625V and 1.25V. We use these to adjust the vbatt readings.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "f734c67fa1dffeec8d7193b4567496157dce9c4c", "tree": "85cb307e4441bbdd01cda4f9c35af79db25bbd02", "parents": [ "e1fd3dae5de0690e77f0ce41ea7956633dd77567" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Aug 11 10:20:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:33 2011 -0700" }, "message": "power: pmic8058-charger: api to get fsm state\n\nImplement an api to return the pmic internal charging state.\n\nNow that we have a enum to define the states, replace the hard-coded\nstate numbers to enum values.\n\nCRs-Fixed: 299629\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "368db7994060778331290d8027e7602bf78e758a", "tree": "3c22e1ec52dc60544d5404992c94ed62df9d4e64", "parents": [ "8a08b966fe5838baec12754480948403fe07a48a" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Tue Jul 05 08:09:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:26 2011 -0700" }, "message": "misc: pm8058-pwm: add two APIs\n\nThese two new APIs allow a driver to specify its PWM period\nand duty cycle separately using PM8058 chip specific parameters\nor raw values. The API to program a duty cycle uses hardware\nmodule\u0027s LUT (LookUpTable) to output PWM value, which can be\nused to alleviate potential glitches using direct writing to\nPWM register.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "d3337ed9e3456ff18c4791fa0372f763bd173328", "tree": "576d61e315afe5517ff4cce637e99de9fd841a81", "parents": [ "3382c5159846e6e6f963261a094329267a61e1b6" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Mon Jul 04 23:16:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:14:25 2011 -0700" }, "message": "misc: pm8058-pwm: split pw8058_pwm_config to smaller structs\n\nA big struct of pw8058_pwm_config is not easy to manage. Split it\nto smaller structs and make the period struct public.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" } ], "next": "5c8ea1f266d8f7af35ea9a716a257771f6de6b94" }