)]}' { "log": [ { "commit": "0c2b0b6ebca94dab1c6d4dd7e4d7dada98260332", "tree": "8a5585a08cebe20a9741d6c9dbcb153f38acddba", "parents": [ "4320c26e053d5e71e1afbc3f5fee829254527e7e", "e91f55cdb5f9d7051ec6a6e7069e27e1bc3d4350" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 24 01:52:02 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 24 01:52:03 2011 -0700" }, "message": "Merge \"mfd: 8018: Add led and pwm devices\" into msm-3.0" }, { "commit": "caeef66d6df3f77a70d1ddfae85d61c783e7d844", "tree": "a811436966430bbcacce26c13e3117d24a9a5f13", "parents": [ "92a6c85f3efe294fee5a061366a9b2d8a2bb1b07", "bace50b68cb37220406094be7ced3b268e3e9556" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Oct 23 16:41:13 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Oct 23 16:41:13 2011 -0700" }, "message": "Merge changes I75900b24,Ibca9cdbf,Ic926e968 into msm-3.0\n\n* changes:\n input: atmel_mxt_ts: Move regulators to LPM/HPM in suspend/resume\n input: atmel_mxt_ts: Add retry mechanism for I2C read/write\n input: atmel_mxt_ts: Clean up pdata and update config array\n" }, { "commit": "f22463f414d74984de74b15e71bf729039e7c1e0", "tree": "055f33037a275e2208bd46b93a0d8c2d7a173067", "parents": [ "9f5f6e5fabdb48db949beb682b42ae7a6bb50176", "a6c514f3fbf9d08562655f183c4949a2520046ef" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 11:59:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 11:59:28 2011 -0700" }, "message": "Merge changes Id6b5096f,Ic8bd7e13 into msm-3.0\n\n* changes:\n eeprom_93cx6: Add write support\n eeprom_93cx6: Add data direction control.\n" }, { "commit": "9f5f6e5fabdb48db949beb682b42ae7a6bb50176", "tree": "9a13a7585e36e8b32f18ca84e1758621b94fddb7", "parents": [ "3409a0ad317279b827a74f27776f5a82a3a7f4e1", "0a3dc88214ed193169eda76ebae0cdda9b795cb8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 11:59:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 11:59:28 2011 -0700" }, "message": "Merge changes Idb1e623b,I854d90ac into msm-3.0\n\n* changes:\n msm_rq_stats: removing calculation of rq_stats\n rq_stats: Doing rq_stats calculation in the scheduler tick.\n" }, { "commit": "2f863174f9c5f974b1e4fbe7f0e17de5c9118122", "tree": "aac4c1c714c419c575d86f109fa1b9fa1bd6c018", "parents": [ "829af4815d3314c8c2661fea4f5c807fb0641ef0" ], "author": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Mon Oct 17 10:56:58 2011 -0700" }, "committer": { "name": "Jing Lin", "email": "jinglin@codeaurora.org", "time": "Fri Oct 21 11:46:20 2011 -0700" }, "message": "input: atmel_mxt_ts: Clean up pdata and update config array\n\nRemove blen, tchthr, x_line, y_line, orient and voltage from platform\ndata to not to overwrite the config data with these values. Update\nconfig array to have the proper values.\nTurn on i2c_pull_up in platform data.\n\nChange-Id: Ic926e96886f52cea3dad29e9a44559b26c717259\nSigned-off-by: Jing Lin \u003cjinglin@codeaurora.org\u003e\n" }, { "commit": "e91f55cdb5f9d7051ec6a6e7069e27e1bc3d4350", "tree": "c4ed303bc49dd67d2ee504d9ed0bfdf49ea3cbe5", "parents": [ "829af4815d3314c8c2661fea4f5c807fb0641ef0" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Oct 17 15:10:07 2011 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Oct 21 10:39:28 2011 -0700" }, "message": "mfd: 8018: Add led and pwm devices\n\nChange-Id: I92b9f6956aac24cef8898ce59263dd80b5b30d3f\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "829af4815d3314c8c2661fea4f5c807fb0641ef0", "tree": "3e507ae87fbfa5682401f5172d453885723afd0f", "parents": [ "3ad954097cb505c5ea1470d9cc61e60113a5de6a", "c72725ac8cfae7b51a4fd76e29a767616af97886" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 09:40:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 09:40:27 2011 -0700" }, "message": "Merge \"radio-tavarua: Configuring the FM Audio path\" into msm-3.0" }, { "commit": "12a177faffaf59a0eafde75756db0dffb99baed6", "tree": "946a21da06a04b2b5bf7f2e1626495d2f1f85988", "parents": [ "dac6e12bae17439e9b344d03ca05e9ed0fe1a4a4", "787af69e5f496a5c1af539b84a4b604296869eeb" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 09:40:27 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 09:40:27 2011 -0700" }, "message": "Merge \"radio: iris: Added missing radio IOCTLs.\" into msm-3.0" }, { "commit": "12c97b5651627b46e80364ed693fde0ff2c5b2c7", "tree": "708cab01a43d2336201012bb7180b0d5c5e5ebb3", "parents": [ "a7620516bbe2942cf4888ad1f28e67e44c061dfe", "e3316a10982cfd753c9824abe249c2096d4f68e3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 06:05:39 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 06:05:40 2011 -0700" }, "message": "Merge changes I7cdf8e45,Id54dcc80 into msm-3.0\n\n* changes:\n USB: EHCI: msm: Configure GPIOs for HSIC strobe and data lines\n USB: EHCI: msm: Add support for HSIC based Host Controller\n" }, { "commit": "391afad3862f190f9d3c7a30d7cae697d175d13e", "tree": "f6aea87472b3923b22b1cae9ed98e2f0f0dee868", "parents": [ "fd5b55d057e7d2842cbc50f2386ed89d2b5c41f7", "fb8e3c1d0c97219d251f4a3b2d90c2daad3d79a5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 03:06:17 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 03:06:17 2011 -0700" }, "message": "Merge \"diag: Add support for APQ8064\" into msm-3.0" }, { "commit": "81153644cfc04177b3f68866f142f53a7eb7fb68", "tree": "9ee447076968d22ccfb59026e8bc31505cc2e9ab", "parents": [ "0ab961e14243cb5406b0216ceab3cfac33f8cccc", "272f660ed75b1c91187cbcbc24f4e6db2389ab04" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 02:10:02 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 02:10:02 2011 -0700" }, "message": "Merge changes I31f6896a,I97eac023,I8770c989 into msm-3.0\n\n* changes:\n msm: camera: Add binning factor to sensor output info\n msm: camera: Set fps when camera is running\n msm: camera: Separate video timing and output pixel clk\n" }, { "commit": "cc1dc1941dc56e67501ba9ed66064e340b9405cc", "tree": "c5be1ff151c380977b3a59ddf89d374c0a276a67", "parents": [ "39abf3847d861a6d47b141dd90f5a1ef23cc822c", "be2a817b1fa73aadb1b613c12358a3e21d4dc53f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 21 01:13:41 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 21 01:13:41 2011 -0700" }, "message": "Merge \"msm: audio: qdsp6v2: Enabling dolby pulse aac codec.\" into msm-3.0" }, { "commit": "be2a817b1fa73aadb1b613c12358a3e21d4dc53f", "tree": "cbb09f0faaca77040c61f3e57fe71803127bb30c", "parents": [ "d9609ac7083e94d098bdbef09912bf4dbe22ec94" ], "author": { "name": "Sidipotu Ashok", "email": "sashok@codeaurora.org", "time": "Thu Oct 20 09:04:35 2011 +0530" }, "committer": { "name": "Sidipotu Ashok", "email": "sashok@codeaurora.org", "time": "Fri Oct 21 11:05:52 2011 +0530" }, "message": "msm: audio: qdsp6v2: Enabling dolby pulse aac codec.\n\nEnable dolby pulse codec, to be used for decoding multi stream\naac content.\n\nChange-Id: Ia936f25820c062112e9838230511e20db2472726\nSigned-off-by: Sidipotu Ashok \u003csashok@codeaurora.org\u003e\n" }, { "commit": "ab1ae8599731ef7315282465ea1ebdf2fe60563e", "tree": "997e40ec7f7afb2711a139996b3901f0c9ed5a10", "parents": [ "a61c8fb9f3d115005c43ffc50f624fb70a39cdb0", "4b99172a1df8b1ad2b48343bead39685f294e680" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "message": "Merge \"msm_fb: display: CSC Matrix update support is added\" into msm-3.0" }, { "commit": "ede570c8805bc8048bed297fe2b408d6ec19535f", "tree": "123ffb8a7f911e08a4c4e4bb81f8d335a75cbb36", "parents": [ "c6a84399c876b79636c06b19fb175b26c5c836a1", "7eaa64dda6ea14fc4ecb5e4abda254607d528319" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Oct 20 22:35:31 2011 -0700" }, "message": "Merge \"Bluetooth: Generate generic Fails for undeliverable ATT messages\" into msm-3.0" }, { "commit": "a6c514f3fbf9d08562655f183c4949a2520046ef", "tree": "665a573bcd54af8b58669ba6e82ad1eb91ed57df", "parents": [ "69215d9680873e76042c902ee6df49f8085b11f5" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Thu Apr 29 13:16:25 2010 +0000" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Oct 20 19:02:06 2011 -0700" }, "message": "eeprom_93cx6: Add write support\n\nAdd support for writing data to EEPROM.\n\nChange-Id: Id6b5096f2d59d21773c06ba3803151c2f3248956\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nCc: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Linux Kernel \u003clinux-kernel@vger.kernel.org\u003e\n[sboyd@codeaurora.org: use usleep_range() instead of msleep()]\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "69215d9680873e76042c902ee6df49f8085b11f5", "tree": "0ca51b22f70863c02ff251ef931f8315ae8453bd", "parents": [ "b8b5669957f3fe0378c431013dca33757e05bda0" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Thu Apr 29 13:16:24 2010 +0000" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Oct 20 19:02:06 2011 -0700" }, "message": "eeprom_93cx6: Add data direction control.\n\nSome devices need to know if the data is to be output or read, so add a\ndata direction into the eeprom structure to tell the driver whether the\ndata line should be driven.\n\nThe user in this case is the Micrel KS8851 which has a direction\ncontrol for the EEPROM data line and thus needs to know whether\nto drive it (writing) or to tristate it for receiving.\n\nChange-Id: Ic8bd7e13ce9bde423001ca23f3de02e76e1dbdaf\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nCc: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Linux Kernel \u003clinux-kernel@vger.kernel.org\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "5bcd20614d16a02d774c16a94e2c706e5939ad15", "tree": "9321ce8f58479f195af9a059aaca1ae458f51529", "parents": [ "f1df53d2843c8643d56d637ce1de242037613ab8" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Oct 06 15:51:41 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Oct 20 18:07:37 2011 -0700" }, "message": "mfd: pm8018: Add PM8018 ADC resource\n\nChange-Id: I6a4df32671b95070cdb719d80767f0ffde8cd40a\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f49d99bc4168c7937655bb09989cc72525163b40", "tree": "ad0c9564e7bb8b3e845917440ee34578fb8f5e51", "parents": [ "a21ec56a1e1d13b1cc3a6f62a39c2be49c450747" ], "author": { "name": "Amar Singhal", "email": "asinghal@codeaurora.org", "time": "Mon Aug 22 19:02:04 2011 -0700" }, "committer": { "name": "Amar Singhal", "email": "asinghal@codeaurora.org", "time": "Thu Oct 20 14:35:49 2011 -0700" }, "message": "rq_stats: Doing rq_stats calculation in the scheduler tick.\n\nWith this change, we do the average run queue statistics calculation\nin the scheduler tick itself. This helps avoid any extra timers to\ndo the same. Also doing this calculation in the scheduler tick avoids\nany bias if the calculation is done in a workqueue\n\nChange-Id: I854d90acc05cc7a7226487be5555976826d8c837\nSigned-off-by: Amar Singhal \u003casinghal@codeaurora.org\u003e\n" }, { "commit": "e3316a10982cfd753c9824abe249c2096d4f68e3", "tree": "4d94a4860f749cd52b0eab26cca3e46e7c2c0c99", "parents": [ "39025fee42f6926aba0a213fb7fdd90633bc5cfd" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sat Oct 15 06:05:17 2011 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Oct 21 00:15:27 2011 +0530" }, "message": "USB: EHCI: msm: Configure GPIOs for HSIC strobe and data lines\n\nAs part of HSIC initialization, in addition to enabling HSIC host\nmode and periodic pad calibration, need to configure GPIO150 and\nGPIO151 pins for HSIC strobe and data lines respectively for\nproper data communication between HSIC devices.\n\nChange-Id: I7cdf8e4532045d813ac6c6e3f53455d0a640245b\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\n" }, { "commit": "39025fee42f6926aba0a213fb7fdd90633bc5cfd", "tree": "75e9be5957b522a0804e4dbf41552a23f7984c18", "parents": [ "c60c2d46299ec789b639c9b0e7dc82f130fa6603" ], "author": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Sat Oct 15 05:55:10 2011 +0530" }, "committer": { "name": "Vijayavardhan Vennapusa", "email": "vvreddy@codeaurora.org", "time": "Fri Oct 21 00:14:26 2011 +0530" }, "message": "USB: EHCI: msm: Add support for HSIC based Host Controller\n\nThis patch adds support for EHCI compliant USB Host Controller\npresent in MSM chips. This Controller uses an HSIC PHY which\ncommunicates with downstream devices using STROBE/DATA lines.\n\nHSIC is a supplement to USB 2.0 specification and is preferred\nfor chip-to-chip interconnect (having maximum circuit length of\n10cm) as it removes the analog transceivers.\n\nChange-Id: Id54dcc802e606e0ff7dd31bc64671a797cd8bc09\nSigned-off-by: Vijayavardhan Vennapusa \u003cvvreddy@codeaurora.org\u003e\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "dd905aaae7cc2e625b5117895901426874cd508a", "tree": "ad141815f2b310f9cb6b1154c098058455a6da49", "parents": [ "567a930dce927416f983a1dd23c7addc894cc780", "17607d277ee963f86a4f60ad6c0de37af932605b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Oct 20 06:02:33 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Oct 20 06:02:33 2011 -0700" }, "message": "Merge \"hwmon: pm8xxx-adc: Add PM8018 ADC Driver\" into msm-3.0" }, { "commit": "4b99172a1df8b1ad2b48343bead39685f294e680", "tree": "90acfd6620722181a3b3f5b90c26c7d076207fe0", "parents": [ "7a6e8d148f0e55c82cc9294c1d1978d613ba5e19" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Fri Jan 28 13:24:34 2011 -0800" }, "committer": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Thu Oct 20 09:33:32 2011 +0530" }, "message": "msm_fb: display: CSC Matrix update support is added\n\nCSC Matrix update support is added for MDP4 VG pipes\nto convert Ycbcr -\u003e RGB format\n\nCRs-fixed: 313601\nChange-Id: Ib6fb8f2eab4b1e871a406a3a2d7274fcfdcdd9d1\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "fb8e3c1d0c97219d251f4a3b2d90c2daad3d79a5", "tree": "4c9c261780eccf28d86148ed1883d8ec0ca2a1f2", "parents": [ "a21ec56a1e1d13b1cc3a6f62a39c2be49c450747" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Wed Oct 19 17:29:42 2011 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Wed Oct 19 17:29:42 2011 -0700" }, "message": "diag: Add support for APQ8064\n\nThis change will add DIAG support for new target APQ8064.\n\nChange-Id: Ic8d21dc39e42fc254f71ee62df8160641c8068f8\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "7eaa64dda6ea14fc4ecb5e4abda254607d528319", "tree": "33643aded53fed97ed5de9c85f06b94a47d42f51", "parents": [ "a21ec56a1e1d13b1cc3a6f62a39c2be49c450747" ], "author": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Wed Oct 19 13:17:42 2011 -0700" }, "committer": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Wed Oct 19 13:20:02 2011 -0700" }, "message": "Bluetooth: Generate generic Fails for undeliverable ATT messages\n\nChange-Id: I04f9ec62b15abb090cb90d81442a83caf8caa447\nSigned-off-by: Brian Gix \u003cbgix@codeaurora.org\u003e\n" }, { "commit": "272f660ed75b1c91187cbcbc24f4e6db2389ab04", "tree": "f136c3df429c23c6760cd2f7d36b7741a1c60113", "parents": [ "b3dcbbdf0356c923c4732ec44b134f1997d97d22" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Oct 18 14:20:03 2011 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Oct 18 14:20:03 2011 -0700" }, "message": "msm: camera: Add binning factor to sensor output info\n\nIncoporate binning factor to calculate exposure time\n\nChange-Id: I31f6896ae7b36f606b8a407e5662d341f8f8ff1e\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "8a7f164195949c7b5001b5472c81dfcb4255cb7c", "tree": "edf5debfab69e006f0221ac8d09da19e5b6fcf44", "parents": [ "842868ef3dbb2cbd3d52c810ace73fb2a8006e7a" ], "author": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Mon Oct 17 17:39:46 2011 -0700" }, "committer": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Tue Oct 18 13:13:57 2011 -0700" }, "message": "Bluetooth: Fix Limited Discoverability for MGMTOPS\n\nCRs-fixed: 309551\nChange-Id: I42c46c62dcb4b227d9ac48146ee61cb52063a6ae\nSigned-off-by: Brian Gix \u003cbgix@codeaurora.org\u003e\n" }, { "commit": "17607d277ee963f86a4f60ad6c0de37af932605b", "tree": "e5bc85db0d659edaead95922bfd5ab36fb282937", "parents": [ "842868ef3dbb2cbd3d52c810ace73fb2a8006e7a" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Oct 05 10:36:20 2011 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Oct 18 09:22:12 2011 -0700" }, "message": "hwmon: pm8xxx-adc: Add PM8018 ADC Driver\n\nPM8921 and PM8018 have a common ADC module. Difference\u0027s\nare in the channel supported on individual PMIC\u0027s and\nin the MPP mapping to the ADC device.\nMPP configuration on PM8018 is not required. The MPP\nis directly connected to the AMUX pre-mux channel.\n\nChange-Id: I9aed3366f20e3985962119274d8b2865b7054a79\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "c72725ac8cfae7b51a4fd76e29a767616af97886", "tree": "33b349c50b15e4601dc7d6cb9bfdef9ef1db2b82", "parents": [ "2b7c5c9d9cd7e10c6815aba15d15f335024ff027" ], "author": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Tue Sep 06 09:28:22 2011 +0530" }, "committer": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Tue Oct 18 18:08:55 2011 +0530" }, "message": "radio-tavarua: Configuring the FM Audio path\n\nThis changes ensures that if \u0027Ananlog\u0027 path is enabled\nthen \u0027Digital\u0027 path is disabled and vice-versa.\n\nChange-Id: I3492471ab69923d29c9912bb1a84784638b38ee1\nCRs-Fixed: 304621\nSigned-off-by: Anantha Krishnan \u003cananthk@codeaurora.org\u003e\n" }, { "commit": "787af69e5f496a5c1af539b84a4b604296869eeb", "tree": "ec8ef0ee5b06e9a94e63a2775d8e411094646ca1", "parents": [ "7a6e8d148f0e55c82cc9294c1d1978d613ba5e19" ], "author": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Fri Oct 14 21:23:03 2011 +0530" }, "committer": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Tue Oct 18 12:08:21 2011 +0530" }, "message": "radio: iris: Added missing radio IOCTLs.\n\nAdded IOCTLs for Read/Write default data commands\n\nCRs-fixed: 312337\nChange-Id: I1012840bb94352041f1e5134054588cb0976eb62\nSigned-off-by: Venkateshwarlu Domakonda \u003cVenkateshwarlu@codeaurora.org\u003e\n" }, { "commit": "e30d3697182ecd07564b547d98abf183cd0a2d55", "tree": "fbc280425a86a2c4f0062412dff7490b0d14ef79", "parents": [ "4ce2f5e00c975417afc63ed3c33ccc3a0b59c6e3" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Oct 14 16:11:01 2011 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Mon Oct 17 16:36:51 2011 -0700" }, "message": "msm: camera: Separate video timing and output pixel clk\n\nCamera video timing pixel clk and output pixel clk\ncan be different. Added vt_pixel_clk and op_pixel_clk\nto address the difference.\n\nChange-Id: I8770c9897bc340908776d01a7583fed84398ff33\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "d02d1db765e82e8728a3a478abfbf0d05e180e8f", "tree": "aa498cb18a8049430eb9e06fbf0084fe093f1549", "parents": [ "5863bbb7bd12625d2639f6eee2b7a81cb347c8d2", "d66c9d51b264b66f7130eb7f310f09fce4b37039" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Oct 17 03:47:33 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Oct 17 03:47:33 2011 -0700" }, "message": "Merge \"drivers: rtc-pm8xxx: Fix automatic wakeup of APPS due to RTC alarm.\" into msm-3.0" }, { "commit": "9d9cdc218cd4fe64cb94ba23fcfca394f2da4b5b", "tree": "1b2bf8c5c73677966010811b1e54281239f3cb24", "parents": [ "b65f532893c362c77afd8e4eec01847b9962318f" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 10 17:17:07 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Oct 17 12:53:07 2011 +0530" }, "message": "msm: Add msm-ssbi devices for PM8058 on supported targets\n\nSupported targets are msm8660, msm7x30 and fsm9xxx\n\nChange-Id: I1d21b73ba67c6769441658e648c32204c72754d3\nAcked-by: Kaushik Sikdar \u003cksikdar@qualcomm.com\u003e\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "d66c9d51b264b66f7130eb7f310f09fce4b37039", "tree": "13dbf9d3b876b1b8031e85e8f83286ec009c1334", "parents": [ "58522b6c825ce37b9e27f8244c62c7e64e684eb6" ], "author": { "name": "Ashay Jaiswal", "email": "ashayj@codeaurora.org", "time": "Thu Oct 13 17:41:40 2011 +0530" }, "committer": { "name": "Ashay Jaiswal", "email": "ashayj@codeaurora.org", "time": "Mon Oct 17 11:08:37 2011 +0530" }, "message": "drivers: rtc-pm8xxx: Fix automatic wakeup of APPS due to RTC alarm.\n\nAlarm interrupt causes automatic wakeup even when the phone is in\npowerdown state.\n\nChange-Id: If3ae30304adba4f07284a3dc496956d67a1ae1b0\nSigned-off-by: Ashay Jaiswal \u003cashayj@codeaurora.org\u003e\n" }, { "commit": "61e816424bea2b9cd705750b06661a6635e6bbba", "tree": "2f682f928bd309772451d301ee2d08dff803c8bc", "parents": [ "b46f4157ba20f9d66c0cf9cf6d8e456a4934a9c3", "cffdff53548ba88cea099a653e104003225607f2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Oct 15 12:53:35 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Oct 15 12:53:35 2011 -0700" }, "message": "Merge \"Kbuild: Add ion header file\" into msm-3.0" }, { "commit": "cffdff53548ba88cea099a653e104003225607f2", "tree": "2cfcc607f2575c965d9b0b0753ce5f5b65bd60b0", "parents": [ "3ce4a81bc3dd15cbb371246ad0daa909346ff0bd" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Sep 23 10:40:19 2011 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Sat Oct 15 11:56:54 2011 -0700" }, "message": "Kbuild: Add ion header file\n\nMake sure the header file for Ion gets exported to userspace.\nAlso make sure userspace can actually use the header.\n\nChange-Id: I44f436005a6a503811c85d4fb0f89264ba160571\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "2ea4f046c594d263397e928314cfee8079f43bac", "tree": "25700367d4d7ce6de504507ed22379a5db02a91b", "parents": [ "7e0f01680ab59dcbbcd6492d1d66cdfa7973a770", "3b46d001e2e4f4aecd2de96e0950dbebdf4f96a3" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 23:04:38 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 23:04:38 2011 -0700" }, "message": "Merge \"msm: kgsl: Add idlestats sleep event notification\" into msm-3.0" }, { "commit": "1c7dce291bb06e39e55975c988236532a342985c", "tree": "c522c09e73c69d8014edb8315b898775dfba0c1e", "parents": [ "e09ef10f91d8cef8626a0c4df58427255e350146", "1fe4c9c7b6282e5acf599f65d3cb5afe08acc053" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 17:30:08 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 17:30:08 2011 -0700" }, "message": "Merge \"msm: camera: Rename EzTune config to Module config.\" into msm-3.0" }, { "commit": "e69add446bc5d1a9dc2a1c96b185e4f1d606d24e", "tree": "61ffe94fd166e1554063f91b5ec63e637b822eb5", "parents": [ "2630a1fc62258c0e1005278b99e73dbfa9c6f0c9", "0123d183c4e5edcbecf72ffbfeec0a89d2cdfb69" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "message": "Merge \"msm: kgsl: make kgsl msm_bus votes more readable\" into msm-3.0" }, { "commit": "87016b23f89d77ac92d8824c8bc13ed9bc804301", "tree": "7001d8fe2b23932008d5fdba3eed368ae4481f31", "parents": [ "e2fcbaa693d727a295afa79f0265e473c0a552a7", "9b4a6be7c466f5462adc28ee9c66797113a8466e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Oct 14 16:35:40 2011 -0700" }, "message": "Merge \"msm: rotator: Add YV12 support in the Rotator\" into msm-3.0" }, { "commit": "1fe4c9c7b6282e5acf599f65d3cb5afe08acc053", "tree": "e964854588b6faeb035dd33bd68fe0a93519f8e2", "parents": [ "c37683a29929d312686347687906f92b3f94cb23" ], "author": { "name": "Ujwal Patel", "email": "ujwalp@codeaurora.org", "time": "Fri Oct 07 12:19:52 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Oct 14 16:45:02 2011 -0600" }, "message": "msm: camera: Rename EzTune config to Module config.\n\nEzTune is a userspace feature which should not be known\nto kernel driver. EzTune is modifying Module config of\nVFE so moving forward correct name used is Module instead of\nEzTune.\n\nChange-Id: I419b7275e72ae5e49b9086a4c59d6a0d2053d0c4\nSigned-off-by: Ujwal Patel \u003cujwalp@codeaurora.org\u003e\n" }, { "commit": "0b51780505f6bf734687533ab37d0f4e5b4ba000", "tree": "265897577d8260b57745c6325425651010f07c65", "parents": [ "4af9f7cbb97dc447cc3e4b3030203e6b05da758c" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Wed Oct 05 09:49:51 2011 -0700" }, "committer": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Fri Oct 14 09:54:50 2011 -0700" }, "message": "camera: Modify the camera event interface.\n\n- The current camera event interface is limited\n to 64 bytes. This restricts the interaction\n between the driver and the userspace since\n the current structures used are already using\n the entire 64 bytes. Hence change the interface\n to overcome this limitation and accomodate more\n usecases(eg: postprocessing for multiplanar formats)\n- Renamed the event structure to a more generic\n name.\n\nChange-Id: Id3c635e2652491da4efd8fe34c32d63464b83755\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "3b46d001e2e4f4aecd2de96e0950dbebdf4f96a3", "tree": "a4d957cd22280a395984abc0110f417c7a67aef1", "parents": [ "76c5182cd20e8421fdfa75f92b4f153dcabea963" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Tue Oct 04 16:26:38 2011 -0600" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Thu Oct 13 15:57:20 2011 -0600" }, "message": "msm: kgsl: Add idlestats sleep event notification\n\nChange-Id: Ie632d3f44661575ad8c7b41f064eff5f3b068f62\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "0123d183c4e5edcbecf72ffbfeec0a89d2cdfb69", "tree": "9b5af401ae4713782a27da7379b4145dfb074adf", "parents": [ "76c5182cd20e8421fdfa75f92b4f153dcabea963" ], "author": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Fri Sep 30 14:59:06 2011 -0700" }, "committer": { "name": "Suman Tatiraju", "email": "sumant@codeaurora.org", "time": "Thu Oct 13 14:46:38 2011 -0700" }, "message": "msm: kgsl: make kgsl msm_bus votes more readable\n\nChange-Id: Ia8de770d0891a078d9b2dc16b8ce541a4820b003\nSigned-off-by: Suman Tatiraju \u003csumant@codeaurora.org\u003e\n" }, { "commit": "9b4a6be7c466f5462adc28ee9c66797113a8466e", "tree": "6ac712c62ddf0a1d00cf4221f7b91a669e24afc2", "parents": [ "18db86ad26d024e5224a53e443eea785fe4a0b2d" ], "author": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Mon Oct 03 17:19:20 2011 +0530" }, "committer": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Thu Oct 13 22:03:39 2011 +0530" }, "message": "msm: rotator: Add YV12 support in the Rotator\n\nAdded changes to support YV12 input format in the Rotator.\nOutput will be Pseudoplanar in this case.\n\nChange-Id: Ic77ad2b6a3aaa66ad923494fb6c96e07738d674b\nSigned-off-by: Pradeep Jilagam \u003cpjilagam@codeaurora.org\u003e\n" }, { "commit": "d7cb92f92909a0b920530a4eaa1e2337e583baaa", "tree": "43cb6399bc46a97e938b71957ab4fcd49c0ebc78", "parents": [ "6cebee06fa90a2478e6ad713ba53dad025ae3895", "69890aa09a70bf8c57c2d1f287b932343a85c8d5" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Oct 12 19:55:56 2011 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Oct 12 19:55:56 2011 -0700" }, "message": "Merge \"diag: Add UART support\" into msm-3.0" }, { "commit": "abcb6f740ef17dcf13979be828ab0d1435824d3a", "tree": "fce0bdbc4a25913368d4128b2bc525925357af8e", "parents": [ "29e31c3659ad0e0bf601026a7f8e1d7eacd97dbf" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Oct 04 16:26:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:30 2011 -0700" }, "message": "gpu: ion: Add cache flushing APIs\n\nAdd ioctl to support flushing the caches of ion\nbuffers from userspace.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "8994e39bcddda72463b94bdd64fe598c33d6c53d", "tree": "aae5ea0b81847e42532887353ff3bcda772afd51", "parents": [ "0a42d696b56d337b04cc3484d8ec9b702c3459aa" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Wed Sep 14 18:20:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:29 2011 -0700" }, "message": "leds-pm8xxx: Pass LED flags from board file\n\nInstead of hard coding the flag into led driver, pass it\nfrom board file.\nWhile at it, re-factor the code to separate led upstream\ncore data with board specific data.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/pm8921-core.c\n" }, { "commit": "354120303af200a1515eca4869a4fe2ac558888c", "tree": "405ca86a3a1439ba006ee587de0eb98a89418b70", "parents": [ "2fee20e30bb5fa63e2c9d939584114224deb47e6" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Sep 29 09:50:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 11 09:59:25 2011 -0700" }, "message": "gpu: ion: Add IS_CACHED macro\n\nAdd a proper IS_CACHED macro for detecting whether or not\nflags indicated a cached mapping.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "69890aa09a70bf8c57c2d1f287b932343a85c8d5", "tree": "2ccd47d1d918e055167dce653a67b6f279522065", "parents": [ "550aa1ab4be6af8caab655a5eac88cbe07040ee7" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Oct 10 12:59:16 2011 -0700" }, "committer": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Mon Oct 10 13:21:41 2011 -0700" }, "message": "diag: Add UART support\n\nDIAG traffic has been supported over USB and SD card. This\nchange adds capability to route DIAG traffic over UART.\n\nChange-Id: I0d6732fcbb19950700218140d581b5759e676b74\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "93d79ecd11a79a097a5c051438d9c3502902af6e", "tree": "47326b900e05c681370345c444278145ffd582a4", "parents": [ "738b458d5dddd549a422fb7b9052e2938d510694" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Sep 21 16:52:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:56 2011 -0700" }, "message": "ks8851: Add GPIO configuration platform data\n\nAdd platform data for the KS8851 SPI Ethernet device to\nenable proper GPIO configuration for the reset and\ninterrupt pins.\n\nChange-Id: I79adae4628f38a2ca5bc17825258c41ab5e1623d\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "4acbdd5c375ec73e0fad73d9d62cc8afccfb2b48", "tree": "f9c81fc5a60fad15be9edcfac45f943afc6c26f5", "parents": [ "eb9e60dc8e78dd7a3bbf707c435da23b260aec9b" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Sep 16 17:09:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Thu Oct 06 09:27:50 2011 -0700" }, "message": "mfd: pm8xxx-pwm: add two APIs\n\nThese new APIs allow a driver to specify its PWM period,\nand raw PWM values separately using chip specific\nparameters.\n\nChange-Id: I3e9860f30a50d4f3d9c556133761d51858d2a2e3\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "cf999117fc6e4b8e84dedb195c023bf7bb0cf193", "tree": "ec3aa3399ed22ebdb6a4e93bb4e62d8e36b8ab36", "parents": [ "0f0242353fd07efb98738dcd883a6eca9305bb5e" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Tue Aug 23 11:27:20 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:37:23 2011 -0700" }, "message": "ASoC: msm: Move ADM management out of QDSP6 CPU driver\n\nAudio hardware path can be started not only for audio playback/capture\nbut also voice call. ADM COPP is created through Q6ADM driver\nwhen AFE port is started. For voice call use case, creating\nADM COPP in DSP wastes unnecessary memory resource. To create\nADM COPP only for audio playback/capture case, management logic\nis moved to pcm routing driver which has information about session\nID of MultiMedia streams and state of audio back-ends. With this\ninformation, pcm routing driver decides to start/stop ADM COPP.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "0f0242353fd07efb98738dcd883a6eca9305bb5e", "tree": "734d603bcfed8f9d10e28f78f4a414042b2b1d4a", "parents": [ "21ebadd5df60c627e36cd4d30c2cff43e0ba4024" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Oct 03 12:00:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:36:45 2011 -0700" }, "message": "power: pm8921-charger: config cold/hot threshold\n\nPmic 8921, has configurable hot and cold battery thresholds as\npercent of VREF_THERM. Provide means to configure these via\nplatform data.\n\nOne has to set the config values in the charger platform data defined\nin the board file.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "c0055a1e92d713993f221d145aef38b4934e7249", "tree": "abb9f9f982d279ca09d163d9ab2a4ec79c80f838", "parents": [ "fad7235d01a1a8fbc3649529117eba2a86414726" ], "author": { "name": "Yonggui Mao", "email": "yongguim@codeaurora.org", "time": "Thu Sep 29 19:31:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:35:54 2011 -0700" }, "message": "Camera: add special effect of emboss, sketch and neon\n\nSigned-off-by: Yonggui Mao \u003cyongguim@codeaurora.org\u003e\n" }, { "commit": "fad7235d01a1a8fbc3649529117eba2a86414726", "tree": "8c5fa8f1bcaca982f01814080878ea9e9775e692", "parents": [ "5ba505a1b2b85172f8b1d62db639894c8a0ab40e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Sun Sep 25 23:06:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:35:51 2011 -0700" }, "message": "power: pm8921-bms: calculate real_fcc\n\nreal_fcc is the remaining capacity in the battery when the charger\ndriver indicates that the battery is fully charged. This value needs\nto be calculated when charging ends with a fully charged battery.\n\nThe userspace can read this value via module parameter and preserve it\nbetween restarts.\n\nThe real reason for calculating this is to indicate how much the battery\ncapacity has dropped w.r.t the profiled battery data use this deviation\nin calculations.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "5e08d77840cfcaba5bd6c43a2ee4b40d516a448f", "tree": "7ddcf017cb0a26d33f974c138040a348f09a96ce", "parents": [ "ad7c9a8e140f0221dc249428507135ac5096a965" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Mon Oct 03 10:19:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Oct 05 10:27:30 2011 -0700" }, "message": "camera: Store the data offsets for each planes.\n\n- When the user queues a buffer, store the data offset\n along with the address offset which is already stored.\n data offset indicates the offset of the data in the\n buffer.\n- Use this offset when the physical address of the\n buffer is configured to VFE.\n- Depending on the number of planes present in the\n buffer, store either the y, cbr offset or the\n offset of each plane.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "767fdda6e12ab7810a910036b52fa3f330afef76", "tree": "0d5cab415de8952c6de04ae6ea32def059dd2db9", "parents": [ "c1824d5b833848cd1a01a3ca526a38da6a20a12c" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Mon Aug 15 15:49:45 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:34 2011 -0700" }, "message": "msm: kgsl: Introduce Iommu Code\n\nkgsl now supports the use of 2 types of MMU. One is\nthe GPU\u0027s internal MMU and the other is IOMMU. Both\nMMU cannot be active at the same time. The MMU type\ncan be selected at compile time via config option.\nA boot command line parameter can be used to override\nthe type of MMU selected at compile time.\n\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "fdd3892444be6412bbeead90c13b5099a417e6bb", "tree": "c975cc2ae61a25282f49491a1888b27e4426fe1e", "parents": [ "b9209474ab4f2f300bc92c9a81dfde4bd507e484" ], "author": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Wed Sep 28 16:23:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:22 2011 -0700" }, "message": "Bluetooth: Add EIR flags to LE Adv data cache\n\nUse the EIR flags to prevent LE pairing attempts to\nBR/EDR capable (Dual Mode) devices.\n\nSigned-off-by: Brian Gix \u003cbgix@codeaurora.org\u003e\n" }, { "commit": "77d106ea896f3c77515fb982e35c96d0861d8928", "tree": "42bd300a872239ec3dd2d7efe2b919fac4062b6d", "parents": [ "43e46a32dec07e5179fda7400b77b16c81b70d88" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Sep 20 16:25:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:14:12 2011 -0700" }, "message": "hwmon: pm8921-adc: Add sysfs interface\n\n-Add sysfs interface to read PM8921 HK/XOADC\nand thermistor temperature measurements mapped\nthrough MPP\u0027s.\n-Move PM8921 ADC from directory /drivers/mfd to\n/drivers/hwmon for userspace clients to read ADC\nthrough hwmon.\n\nCRs-Fixed: 302365\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/Kconfig\n" }, { "commit": "0b9e51735ead59494b60b2040d197ab24e312698", "tree": "71b6cc0cac6b061e5b927f80ff75f26ab39419ab", "parents": [ "6066a843dcf6d3b6b9231c76aae3f82bc159367e" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Sep 29 18:54:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 17:13:56 2011 -0700" }, "message": "thermal: tsens: Add support for MDM9615\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f9cfa8ebfab2152b111432003bc7b749de6341f9", "tree": "5f86a3e8c5507e94c820cab27ecd19b0702f8593", "parents": [ "133aa41ecc2ff8689f58857a71c19cf90fe035b6" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Fri Sep 23 14:29:11 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Tue Oct 04 09:50:33 2011 -0700" }, "message": "msm: remote_spinlock: Add support for hardware mutexes\n\nAdd support for hardware mutexes.\n\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "02eff13c45b19505ddba49911a089ef5f238ca25", "tree": "e4bd7a5411434a4a73bf5d97b277ee0d4b1c813c", "parents": [ "d98328ef478ee964aa9ac48c88a43356dc320404" ], "author": { "name": "Amit Blay", "email": "ablay@codeaurora.org", "time": "Wed Sep 21 16:46:24 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:35 2011 -0700" }, "message": "usb: otg: Add usb_hs_system_clk to OTG driver for MSM9615\n\nThis change add usb system clock support to OTG Driver.\nSystem clock is a 60MHZ input clock to the USB ChipIdea core.\nThis clock is required starting from MDM9615.\n\nThis change also removes the enforcement for using a phy_reset_clk\nfor reseting the PHY. Starting from MDM9615, PHY reset is not implemented.\nThe core is reset together with the PHY using \"usb_hs_clk\" signal.\n\nSigned-off-by: Amit Blay \u003cablay@codeaurora.org\u003e\n" }, { "commit": "d7e02d4d604fd96b16f63693bf1da23b51bed6a5", "tree": "cf11692c850db3f4025def4d771790ef0a3bf6d9", "parents": [ "e0b11453c13df0fd79848fa05b1a95b6479f2ca2" ], "author": { "name": "Sachin Shah", "email": "sachins@codeaurora.org", "time": "Mon Sep 12 20:31:02 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:33 2011 -0700" }, "message": "tzcom: Implement abort and cleanup of driver\n\nAdd a new IOCTL call to the driver to properly\nabort all threads blocked on wait queues. Updated\nrelease call for proper cleanup.\n\nCRs-fixed: 303637, 304152\nSigned-off-by: Sachin Shah \u003csachins@codeaurora.org\u003e\n" }, { "commit": "1097519e8b6a0404f45a1cb60b2101fa875faebd", "tree": "4b90f6550aba7921b97a0e7645002b73cabd49fd", "parents": [ "9c25f07a709f3e8ad4a22974d1dd7c53d613430e" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Sep 23 19:16:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:25 2011 -0700" }, "message": "mfd: pm8xxx-irq: Set unique dev id for sys device\n\nUse device id passed from platform data to register\nfor sysfs.\n\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/mfd/pm8xxx-irq.c\n" }, { "commit": "0e795c44c1a64a7c23184c3639399510a49cabd3", "tree": "ec4ad0275805057c941924651965b94bbbec128e", "parents": [ "e9ceb522ff08c3634da2efaaf6bc045136ca29ad" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Mon Aug 15 18:10:30 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:23 2011 -0700" }, "message": "ASoC: msm8960: Add support for AUX PCM Interface\n\nAuxiliary PCM Interface is external PCM interface on msm that\ncan be used instead of internal codec as a way to connect an\nexternal codec to the msm.\n\nEnable support for AUX PCM. Current setting on PCM interface is,\n2.048 MHz bit clock, mono stream, 8Khz sample rate, with MSM in\nmaster mode. AUX PCM uses GPIO\u0027s to interface with external\ncodec device.\n\nAdds platform data for cpu dai since cpu dai needs to know\nwhich clock on MSM to use, clock rate to use and other\nconfiguration parameters.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "e9ceb522ff08c3634da2efaaf6bc045136ca29ad", "tree": "6cfdc049cce4d9bcffc6bb2974e1ff90c2a0637b", "parents": [ "80eaa6c4e2f9ddd1b4bc4424e7feb9bcb4e14695" ], "author": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Thu Sep 22 10:46:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:22 2011 -0700" }, "message": "Bluetooth: Fix LE Pairing time-out\n\nTimer that was started at beginning of LE Pairing did not correctly\nterminate pairing process when it fired, and was not properly cleaned\nup on pairing completion.\n\nSigned-off-by: Brian Gix \u003cbgix@codeaurora.org\u003e\n" }, { "commit": "55cbf7893541c608c7660c54ad7f0cbe62736bcd", "tree": "f71436d02eeb482dd0fc65fb729c693d2b3afead", "parents": [ "55208e6c57cc01f342367f6317398474bcf6ec9c" ], "author": { "name": "Deepa Madiregama", "email": "dmadireg@codeaurora.org", "time": "Sat Sep 10 05:44:39 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:12 2011 -0700" }, "message": "msm: audio: qdsp6v2: Add decoder unification changes\n\nSigned-off-by: Deepa Madiregama \u003cdmadireg@codeaurora.org\u003e\n" }, { "commit": "55208e6c57cc01f342367f6317398474bcf6ec9c", "tree": "8d2e19a52f3c893d6c9fe7711ea07d82d165da72", "parents": [ "4296f37603322a47b30e585422813fc4743f4298" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Sep 21 10:20:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:12 2011 -0700" }, "message": "thermal: tsens: Add platform information for 9615\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "0f063b8670c045c16717b42180abc288c900f8a4", "tree": "0be0c4c1ac66fa5ee68dc59f8f2958b48d386b36", "parents": [ "98738c5176b98e735b3b9bb24d1a2b453d57112b" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Mon Sep 19 17:44:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:08 2011 -0700" }, "message": "mfd: pm8921-adc: Add configure and read from MPP ADC\n\nSupport configuring a MPP to pre-defined AMUX6 channel\nwhich is used for dynamic mapping of the MPP-AMUX channel\nfor clients having multiple MPP\u0027s to read ADC.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "33fe6fb63c6f0f16f561efbe1027ad45ba4e3241", "tree": "0216b31bb98c84b9cbf083319386e170ccd4b5bf", "parents": [ "325bdc9937bf30efbdc0331290d4efed8c15f431" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Sep 14 16:03:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:06 2011 -0700" }, "message": "power: pm8921-charger: update userspace per update_time milliseconds\n\nThe userspace should be updated periodically to update it with the\ncharging progress.\n\nCreate a delayed_work and schedule it every update_time milliseconds\nto notify the userspace that power supply changed. The userspace\nis then supposed to read the power supply properties and know about\nthe charging progress.\n\nCRs-Fixed: 305572\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "325bdc9937bf30efbdc0331290d4efed8c15f431", "tree": "97539a050a2e226abc1981c7a708eb0fe9cf04c5", "parents": [ "b936792900f41c4234ad0cddd55afcd6922628b8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Sep 07 20:45:49 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:21:05 2011 -0700" }, "message": "power: pm8921-bms: report FCC\n\nSince the BMS can calculate FCC based on the charge cycles and age, use it\nto report ENERGY_FULL property in the power supply framework.\n\nCRs-Fixed: 304029\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "33f34449d2e2f69f5a7bd278040f2399bbc2cf6b", "tree": "142202ca25a1590f2665a8845fd1f448c4fcf15f", "parents": [ "dd0bde3ae7bddcc315069ce59ddbfbe5455b1bfd" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Mon Aug 08 16:22:03 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:58 2011 -0700" }, "message": "slimbus: Add clock pause support.\n\nClock pause message informs all devices on the bus that the active\nmanager having framer device pause the bus. This allows stopping the\nclock to conserve power.\nClock is paused only if there are no active data channels on the bus\nand no response is pending for any READ message.\nSlimbus framework wakes up the controller using a wakeup function\npointer. Controller should then program the active framer to be out of\nclock pause.\n\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" }, { "commit": "73787fae48db33ab8471452c175780f2caa3a856", "tree": "00f4bc244128f0b38b05238814ee9bf2243fb0b4", "parents": [ "ee31ae9d8af98e52b7b23aaf071c5bc2143be877" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Fri Sep 09 15:14:20 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:56 2011 -0700" }, "message": "misc: isa1200: Add regulator support\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "6d565fdf7a968c6969afb5208f02ac80ee781215", "tree": "64ccb72d7c15f909d632d58f0b77275b7359eaab", "parents": [ "604c6475cab537eac382f9aa083ef843007c911e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Sep 15 18:49:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:55 2011 -0700" }, "message": "msm: restart: Handle reset interrupt from pmic\n\nThe reset interrupt in the pmic indicates the pmic will shutdown\nthe msm in few seconds - it does so by lowering the reset_n line\nto the msm.\n\nWhen this interrupt is triggered it is required that no more ssbi\ntransactions are initiated and the msm should cleanup and prepare\nfor the impending shutdown. There is no need to lower ps_hold in\nthis case as the pmic will shutdown the msm regardless.\n\nAlso since we don\u0027t want any ssbi transactions, force shutdown\nnonboot cpus. This will prevent ssbi transactions to the pmic for\nlower/raising nonboot cpu\u0027s voltages as they enter/exit idle states.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "5285a21f337c72b408a240335d6f6a50170c7ce3", "tree": "d0b1cae59ebdb7f5bf6a92216d44705f0820ebae", "parents": [ "9ffded25fd54bb11ff7c1596736148d5c7e32ea7" ], "author": { "name": "Sriranjan Srikantam", "email": "cssrika@codeaurora.org", "time": "Tue Sep 06 19:09:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:51 2011 -0700" }, "message": "ASoC: msm8960: Enable soft volume and soft pause features\n\nAdd support for soft volume and soft pause commands and\nenable the features to avoid glitch or pop during volume\nchange and pause-resume sequence\n\nSigned-off-by: Sriranjan Srikantam \u003ccssrika@codeaurora.org\u003e\n" }, { "commit": "4e38bfc56cfbc092a6edd3256d66756e5ebd7095", "tree": "bda8b51d3ef86954db9f4bb9226ae2e4529bad99", "parents": [ "5a44dcd0aac895c8825272eb14788cd1abc86453" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Thu Sep 15 16:00:31 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:46 2011 -0700" }, "message": "radio: tavarua: Added place holder for notch filter ioctl\n\nThis patch adds place holder for notch filter, to keep\nthe driver compatible with the framework changes made for IRIS\n\nCRs-fixed: 306856\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" }, { "commit": "20ec38a9ae268e10f6cc4440ae543bd9e03becb1", "tree": "b1d5edc670f3e401d52c748191d0b9a08edd7ca6", "parents": [ "55f2a62dff1b7a0fc9f6ce04a574b4d7a47b33cc" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Wed Sep 14 10:51:28 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:28 2011 -0700" }, "message": "msm: idle_stats: Make idle_stats_device.h userspace accessable\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "e922bbba5c9379fe63c1b6a1aa5fc7ab40df8a1c", "tree": "262150ff04d1fa43336d4f3f423f8b839002c08e", "parents": [ "daf1d2101d21f27ed21dbc8e9afe9e82f24083c2" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Sep 01 13:05:06 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:20 2011 -0700" }, "message": "power: pm8921-bms: use battery data based on battery id\n\nCurrently the battery data is passed via the board file. Instead\nread the battery id and choose the appropriate battery data to use.\n\nCRs-Fixed: 304376\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "8e9f99e6223480a453501c07afe6aadaeec2085e", "tree": "99bb62da5035911517be536530ecf587f20a06bc", "parents": [ "3dd7017dd3bb06476d435c4fe99f11082e3da0a5" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Fri Aug 26 16:33:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:18 2011 -0700" }, "message": "msm: add video processing engine (VPE) as a V4L2 subdev in 8960.\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "9f9ece38d5b86d6429e7d14b21586df9396ed871", "tree": "825a109c5b7b4ae2d0b86a317992e177718bfa35", "parents": [ "e05fc4d4b77c22352e2ef61b4a07715878f9612e" ], "author": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Sat Sep 17 23:23:25 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:16 2011 -0700" }, "message": "hwmon: msm_adc: Add stub function\n\nAdd stub function to allow client\u0027s code to avoid ifdef.\n\nSigned-off-by: Amir Samuelov \u003camirs@codeaurora.org\u003e\n" }, { "commit": "a0f5121b963d156bedec134badbf588aae0d7afc", "tree": "ab5da27f7dd537901ff9179fff392914386625d7", "parents": [ "3893bf924bb095636fc4bac26f844eb8aa7f1c6d" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Sep 13 17:49:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:09 2011 -0700" }, "message": "mfd: pm8921-adc: Fix scaling and PM8921 MPP ADC read\n\n-Modify the existing PM8921 ADC read api to include\nreading ADC mapped to devices on the MPP.\n-Modify scaling function to support XOTHERM and PATHERM\non PM8921.\n-Remove post scaling functions for external charger\nas its not used on PM8921.\n\nCRs-Fixed: 307164\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "b909f239f1258313620847af9401224f7e2455e0", "tree": "553a3ec20bcc53512d0d35ff7fa1a6c4f14f9352", "parents": [ "34dd32ce2c308ff3071f9c5f0b73a5f77cdbd4bd" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 29 10:52:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:06 2011 -0700" }, "message": "mfd: pm8018: Add support for PM8018 regulators into PM8018 core\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "34dd32ce2c308ff3071f9c5f0b73a5f77cdbd4bd", "tree": "71f6f595103a4e8287746d0c381296b3c8204a57", "parents": [ "99a6f3973b41cf57254fbbe647dae3af0aaf1f30" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Aug 29 09:22:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:05 2011 -0700" }, "message": "regulator: pm8018-regulator: Add regulator driver for PM8018\n\nCreate a regulator driver to control all regulators on the Qualcomm\nPM8018 PMIC chip. This chip contains several different types of\nregulators with a wide range of abilities and voltage ranges.\n\nFive different regulator types are available on the PM8018.\n\nPLDO - PMOS low drop out linear regulator\nNLDO - NMOS low drop out linear regulator\nNLDO1200 - 1.2A NMOS LDO (different control structure than other LDOs)\nSMPS - switched-mode power supply\nVS - voltage switch\n\nThe driver interfaces with the PMIC using Qualcomm\u0027s SSBI bus.\nCalls to this bus are abstracted through the pm8xxx_readb/writeb API.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "fdefdf941f500d41e1d096faba4dd4b45d70f616", "tree": "9466cee22d35b9b2adcb244d9e9d3ecc3709c31e", "parents": [ "1a4611182f9b104d7caebcb508829451037d6368" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Sep 08 14:18:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:04 2011 -0700" }, "message": "mfd: pm8018: Add PMIC 8018 core driver\n\nAdd support for the Qualcomm PM8018 PMIC chip. The core driver\nwill communicate with the PMIC chip via the MSM SSBI bus.\n\nInitial support is provided for: IRQ, GPIO, MPP, RTC, Power Key,\nMisc, and Debug\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "3c7a8eb9d84fd4a0b7e931e8ea607a6e9e2e2c0d", "tree": "94860a34e823007a0b1f89b38805a92088db1505", "parents": [ "fbf113d21fc10d662e13b3c177b571d711ce393d" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Sun Sep 18 09:10:21 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:20:00 2011 -0700" }, "message": "radio: iris: Added missing radio Events \u0026 IOCTLs.\n\nAdded support for events rds availability, service availability,\nalternate frequency list and RDS group complete.\n\nAdded IOCTLs for search on, radio state, search Program Type,\nsearch Program Identification, alternate frequency jump,\nstop Program Service name transmission and stop radio text transmission.\n\nCRs-fixed: 307369\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" }, { "commit": "32657ec8c496e69788445bcb894fb825527708f4", "tree": "270fe85f3bce662f6bde131ea6084a5acd7b28f2", "parents": [ "5f4b344ef8050c77eadaff2e6471a0f49f81efa7" ], "author": { "name": "Laxminath Kasam", "email": "lkasam@codeaurora.org", "time": "Mon Aug 01 19:26:57 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:58 2011 -0700" }, "message": "ASoC: msm8960: Initial commit for ALSA Audio RT Proxy Driver.\n\nTo support the RTPorts Playback and Capture,new platform\ndriver msm-pcm-afe is added. Two FE\u0027s each for playback\nand capture are added. Four BE\u0027s are added - two for each\nport acting as playback and capture. Corresponding mixer\ncontrols are also updated.\n\nSigned-off-by: Laxminath Kasam \u003clkasam@codeaurora.org\u003e\n" }, { "commit": "5f4b344ef8050c77eadaff2e6471a0f49f81efa7", "tree": "a5f495d6baacc2298753e076a0adf11a5aba8e59", "parents": [ "a4b5f30e624a97c17df789f442c8dece775f2ad1" ], "author": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Thu Sep 08 14:56:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:57 2011 -0700" }, "message": "msm: camera: Get info changes for unified actuator\n\nSigned-off-by: Sreesudhan Ramakrish Ramkumar \u003csrramku@codeaurora.org\u003e\n" }, { "commit": "a4b5f30e624a97c17df789f442c8dece775f2ad1", "tree": "71fbcf4f5031e6481c7ad9a9ac9bae161b55391d", "parents": [ "d7614a77e3633a007e64c051b5cdd8c5d4b757df" ], "author": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Mon Sep 12 16:23:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:57 2011 -0700" }, "message": "msm: camera: Actuator changes for 8960\n\n1) Added actuator framework with common functions abstracted out\n2) Added actuator as a sub device in media controller\n3) coupled sensor with its specific actuator in board file\n4) Added new actuator control structure and new enum for communication\nbetween user space and kernel space\n5) Added common logging module with different logging levels\n\nSigned-off-by: Sreesudhan Ramakrish Ramkumar \u003csrramku@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/configs/msm8960_defconfig\n" }, { "commit": "acd24260ac4c8adb5b672b5db1588516a315dce2", "tree": "73a848388d68e4f04fb8e899f004c7c2295fea8d", "parents": [ "8fa3eb6570e66427d85b87b447c9bbdcc37fbaf9" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Aug 18 11:19:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:52 2011 -0700" }, "message": "thermal: msm: Update TSENS for 8960_V2\n\nTSENS V2 supports reading from multiple sensors and\nnotifiying clients when the lower/upper thresholds\nare reached. The lower/upper threshold use the last\nsensors threshold that are set through the thermal sysfs.\nTSENS HW is enabled only when the main sensor is requested.\nThe TSENS block is disabled if the main senors is disabled\nirrespective of any other sensors that are being enabled.\nWhen TSENS receives notification on temperature threshold\nbeing reached, it checks and sends events to the sensors\nthat are enabled and whose thresholds are above the upper\nor below the lower thresholds set in the tsens threshold\nregister.\n\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "2e2f50d997001230d30f638c2168a4db06c3bda7", "tree": "faad9b5d1e738bf2484981c51f908a4e489d484c", "parents": [ "e57c1673aca1bd5ced5faecc4d5ad008d43aaf7b" ], "author": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Tue Sep 13 12:36:04 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:44 2011 -0700" }, "message": "Bluetooth: Add LE/BR flag to Connect notification\n\nWhen remote device is connected outside the control of BlueZ, it\nneeds to be informed of whether the new connection is LE or BR/EDR.\n\nSigned-off-by: Brian Gix \u003cbgix@codeaurora.org\u003e\n" }, { "commit": "4ac053cdb9893a85c1d28afa8a1f80f139fa7bdd", "tree": "df84187808901bdfeb7d7308a03ecf5ffe9e4762", "parents": [ "339aadf4a78a4dedb10e4f5a40bcca742a25dd20" ], "author": { "name": "Iiro Valkonen", "email": "iiro.valkonen@atmel.com", "time": "Thu Sep 08 11:10:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:35 2011 -0700" }, "message": "Input: atmel_mxt_ts - Make wait-after-reset peroid compatible with all chips\n\nThe delay before the chip can be accessed after reset varies between different\nchips in maXTouch family. Waiting for 200ms and then monitoring the CHG (chip\nis ready when the line is low) is guaranteed to work with all chips.\n\nv4: Adjust delay depending on the family ID of the chip. Also add a readback\n of command register after backup is issued, to make sure we are not\nproceeding\n too fast there.\nv3: Add a check for NULL read_chg() function, and add the read_chg() to platform\n files using this driver (currently only mach-goni.c)\nv2: At Dmitry\u0027s suggestion, add a timeout so we are not stuck looping\n endlessly in case the CHG is not going low.\n\nSigned-off-by: Iiro Valkonen \u003ciiro.valkonen@atmel.com\u003e\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "feea77447cdc0b1e0b2e10a44dcaae20b92544b3", "tree": "a089e9f9d84b78a42ed43bd37270855db41e7092", "parents": [ "0f4098f5b445f624e821e5cc97f88b0635ec95c3" ], "author": { "name": "Neema Shetty", "email": "nshetty@codeaurora.org", "time": "Sun Sep 11 12:30:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:34 2011 -0700" }, "message": "ASoC: msm: Change voice routing controls.\n\nChange voice routing controls to contain back-end DAI and front-end\nDAI information.\n\nCRs-fixed: 304889\nSigned-off-by: Neema Shetty \u003cnshetty@codeaurora.org\u003e\n" }, { "commit": "0f4098f5b445f624e821e5cc97f88b0635ec95c3", "tree": "dd94c83c9c862bb3f554fb7af2c23e1ab0815452", "parents": [ "6f8108f0d0e6fcf91620cb2033cdbde7203064aa" ], "author": { "name": "Srinivasa Rao Uppala", "email": "uppalas@codeaurora.org", "time": "Tue Sep 06 16:46:28 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:33 2011 -0700" }, "message": "radio: iris: Added support for FTM commands\n\nThis patch adds support for RDS group counters,\nSet HLsi and Set notch filter FTM commands.\n\nSigned-off-by: Srinivasa Rao Uppala \u003cuppalas@codeaurora.org\u003e\n" }, { "commit": "ecdd1004ead02409d6adb93a0c12320954116d8a", "tree": "e037f18969f28acd100928c730c62a0290ab5062", "parents": [ "1fc44074b021d432e09ebcb60317dcbbf569c4f6" ], "author": { "name": "Sameer Thalappil", "email": "sameert@codeaurora.org", "time": "Fri Sep 09 10:52:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:30 2011 -0700" }, "message": "wcnss: PM un-register API for Riva platform driver\n\nThis API will be called by the host drivers to un-register the PM APIs\n\nSigned-off-by: Sameer Thalappil \u003csameert@codeaurora.org\u003e\n" }, { "commit": "ff2d366f21bf5ec2748e890fc15966932f5fd981", "tree": "27acca3a8ba169a77aa03f8580afab84aed4c5bb", "parents": [ "ab34ca44fcf6d9dd34eeb23ad0d282799b659fe6" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Aug 31 17:13:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:19:28 2011 -0700" }, "message": "drivers: iommu: Add flags to iommu_domain_alloc\n\nAdd the ability to pass flags into the iommu_domain_alloc\nfunction to specify domain attributes.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "15b911f61535abe60a2e354b2d3aa0d2a76252ba", "tree": "68e5ea7d6c8e3d821f8cfb9d4e5ba33545aacfd4", "parents": [ "a68668b4e3e9076190521459ba3773a92f237152" ], "author": { "name": "Kun Han Kim", "email": "kunhank@codeaurora.org", "time": "Fri Jul 08 09:30:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:52 2011 -0700" }, "message": "Bluetooth: Added support for HFP 1.6 Wide Band Speech\n\nSigned-off-by: Kun Han Kim \u003ckunhank@codeaurora.org\u003e\n" }, { "commit": "a68668b4e3e9076190521459ba3773a92f237152", "tree": "93eb173d9875d219c8dea13546b3b2973bfcd93e", "parents": [ "a8d41eed79264a58384b4f844c2aa82ece91f181" ], "author": { "name": "Brian Gix", "email": "bgix@codeaurora.org", "time": "Thu Aug 11 15:49:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:51 2011 -0700" }, "message": "Bluetooth: Add LE SecMgr and mgmtops support\n\nEnabled ECB Block encoding for Low Energy pairing\nImplemented missing components of MGMTOPS interface\nDifferentiated as needed between BR/EDR pairing and LE pairing\n\nSigned-off-by: Brian Gix \u003cbgix@codeaurora.org\u003e\n\nConflicts:\n\n\tnet/bluetooth/mgmt.c\n" }, { "commit": "e505066887bfd81511000e6213ace4dfd427ead7", "tree": "552e563ac9ded47960ad5453995f9e79009e44e2", "parents": [ "9e4491612de7c7a322d061b85c8d42ee42ea831a" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue Aug 02 15:39:45 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:45 2011 -0700" }, "message": "ALSA: tlv - Add tlv.h to include/sound/Kbuild\n\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "6b0f33239d02190cd6c8c0461bd588d39283f35d", "tree": "431d952e4b135bf442d021e8e101017327b49ce4", "parents": [ "2a7ea7ed2f7fe8064a66d6dad0ed051619ae83d3" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Fri Aug 26 12:14:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 16:18:38 2011 -0700" }, "message": "camera: v4l2: Add msm_isp_cmd structure in msm_isp.h.\n\nThis structure replaces msm_vfe32_cmd, and is exported\nto user space.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" } ], "next": "ad74236b904ce758b32aad1c31a29d434975a1e4" }