)]}' { "log": [ { "commit": "edd5fd79fb7eb5b2e8937a2a87c2ee453e204377", "tree": "71b7f6c86510c8ed70e6d45f0b57dfbe666eb7eb", "parents": [ "405dc3051b06637b6a38aa6b1f4da1660cff37d0" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Jun 22 18:50:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:42 2011 -0700" }, "message": "input: cyttsp-i2c: choose firmware start address\n\nFirmware start address changes from GEN3 to GEN2 devices.\nSelect proper firmware start address based on chip generation.\n\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "405dc3051b06637b6a38aa6b1f4da1660cff37d0", "tree": "7f1e7a6efb94ef7a0d20dbda722d390ea5e1a2de", "parents": [ "5a3695011acfed1787ad3bbad90c3fc5bd239134" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Thu Jul 21 15:06:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:42 2011 -0700" }, "message": "msm_fb: display: add ioctl for mixer info\n\nAdd new ioctl to allow user to query mdp mixer detail configuration.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "5a3695011acfed1787ad3bbad90c3fc5bd239134", "tree": "9933b77def5b64f763ac7cc91847d3220c2b31f6", "parents": [ "70765cd7a317954776aa4b556d8a74091edfa051" ], "author": { "name": "Manish Dewangan", "email": "manish@codeaurora.org", "time": "Mon Jul 25 20:00:41 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:41 2011 -0700" }, "message": "msm: audio: qdsp5: Add timeout for read call of pcm in driver\n\nAny unexpected events such as sdcard removal can delay the\nreading of recorded packets and results in pcm driver running\nout of frame buffers. But read calls of application gets blocked\nfor such unknown or abrupt errors.\n\nAdd timeout of two seconds for read call in pcm in driver to avoid\napplication getting blocked on driver read calls in any error cases\nwhich can result in improper application behavior.\n\nSigned-off-by: Manish Dewangan \u003cmanish@codeaurora.org\u003e\n" }, { "commit": "70765cd7a317954776aa4b556d8a74091edfa051", "tree": "4b5e922681bee32f0427fee2e6375d144e6f9f9e", "parents": [ "9a9e76e0def4526129321eae6564b4f29332e6b3" ], "author": { "name": "Swaminathan Sathappan", "email": "Swami@codeaurora.org", "time": "Tue Jul 19 18:42:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:40 2011 -0700" }, "message": "msm: audio: qdsp6v2: Add support for aac dual mono playback\n\nSigned-off-by: Swaminathan Sathappan \u003cSwami@codeaurora.org\u003e\n" }, { "commit": "9a9e76e0def4526129321eae6564b4f29332e6b3", "tree": "cb2e3aac22b381878e3e62aec5725b1ad825c782", "parents": [ "d090389b32a6c482d9a7c08a4f6e7ca09befbb54" ], "author": { "name": "Vijayakumar Muthuvel Manickam", "email": "vmuthuve@codeaurora.org", "time": "Thu Jun 30 11:22:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:40 2011 -0700" }, "message": "mfd: marimba_core: Add debugfs interface for ADIE\n\nCreate debugfs entry for Marimba, Timpani, Bahama ADIE\n\nSigned-off-by: Vijayakumar Muthuvel Manickam \u003cvmuthuve@codeaurora.org\u003e\n" }, { "commit": "d090389b32a6c482d9a7c08a4f6e7ca09befbb54", "tree": "c3b175a94974ad73de8a1f6986aefed76b4ffa52", "parents": [ "15f864685553406ab4dbb3ac7d40a0dc303df9a6" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Jul 14 16:08:30 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:39 2011 -0700" }, "message": "msm: rpm-regulator-8960: change request packing format\n\nChange the packing format of LDO and SMPS RPM regulator requests\nto mirror changes made to interface on the RPM side.\n\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "15f864685553406ab4dbb3ac7d40a0dc303df9a6", "tree": "94b9ad83a61e657c9592908b94bd68f88276386b", "parents": [ "603d1cb1436484d36ea7c2c7119af683445b4af8" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Mon Jul 25 10:36:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:39 2011 -0700" }, "message": "platform-drivers: msm: sps: add spinlock for BAM\n\nWhen client drivers use spinlock and embrace SPS APIs that use mutex,\nscheduling error may happen. Use spinlock for these SPS APIs instead.\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "603d1cb1436484d36ea7c2c7119af683445b4af8", "tree": "795856e0ec3876e536645968a8a704ed1f131948", "parents": [ "96a9f90882a342f307761c0333899ab97fed2bc6" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Sun Jul 24 17:17:04 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:38 2011 -0700" }, "message": "usb: gadget: Check for pending requests before priming the ep\n\nFor any data to be transferred over usb endpoint, USB S/W\nconfigures the data to be transferred in queue heads and transfer\ndescriptors and requests h/w to process the data by priming the\nendpoint. Sometimes it is observed that endpoint priming is\nfailing when usb requests are being queued back to back. Although\nthe h/w is recovering later, some unprocessed requests are\npending in ep requests queue. To avoid this issue, check for\nstale requests before priming the endpoint and add the current\nrequest at the endpoint of request queue.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "96a9f90882a342f307761c0333899ab97fed2bc6", "tree": "4fcf73126a2d03a2c8191f7b884390071a94438e", "parents": [ "e9cb532c807c61afb1f692d013da6a3e88028e90" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Jul 18 18:43:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:37 2011 -0700" }, "message": "msm: pil: Replace incorrect offset check\n\nThis check is practically useless as it doesn\u0027t ensure anything\nbesides that the program headers start within the file size. It\u0027s\nstill possible for the program headers to extend beyond the size\nof the data passed in. Fix this check by actually ensuring the\nsize of the buffer is enough to contain at least the program\nheaders so we don\u0027t access unmapped memory.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "e9cb532c807c61afb1f692d013da6a3e88028e90", "tree": "a441369902e241f541f1751e5d7cf4ef1b7ab62f", "parents": [ "cb791443cfcd968d3eee148fd731df2f72925fb7" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Wed Jul 20 14:46:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:37 2011 -0700" }, "message": "msm: rmt_storage: Initialize force_sync as read sysfs entry\n\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\n" }, { "commit": "cb791443cfcd968d3eee148fd731df2f72925fb7", "tree": "2dd90478c394c95ee95d3422982908dfb560728c", "parents": [ "8dddd75ae0b91a2d6664aac865d3ac1082a67555" ], "author": { "name": "Oluwafemi Adeyemi", "email": "aadeyemi@codeaurora.org", "time": "Mon Jul 11 22:51:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:36 2011 -0700" }, "message": "mmc: msm_sdcc: Send CMD52 after every CMD53 write\n\nOn a completion of a CMD53 write, send a dummy CMD52\nbefore reporting completion to client.\n\nSigned-off-by: Oluwafemi Adeyemi \u003caadeyemi@codeaurora.org\u003e\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "8dddd75ae0b91a2d6664aac865d3ac1082a67555", "tree": "4a5e02451babf0a89c3122e0aa4a619223fbd419", "parents": [ "e9a54343561fd5852a2373b5d42f5a82fdda09f6" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Jul 13 11:19:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:35 2011 -0700" }, "message": "msm_serial_hs_lite: Add support of loopback mode for each uart port\n\nThis change allows to use debugfs entry called loopback.uart_id to\nenable/disable uartdm internal loopback mode.\ne.g. for /dev/ttyHSL0 device,\nit creates \u003cdebugfs_dir\u003e/msm_serial_hsl/loopback.0\n\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "e9a54343561fd5852a2373b5d42f5a82fdda09f6", "tree": "c7061e82069a34c2ae40ff2eb86555072c675812", "parents": [ "c4b8b2fb9d783be26b85381b3618bbe253a75b89" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Wed Jun 29 20:27:08 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:35 2011 -0700" }, "message": "msm_serial_hs_lite: Reset uartdm core after changing baud rate\n\nRxstale interrupt is not working after changing the baud rate once device\nis opened. It is required to reset the receiver and transmitter after\nmodifying the IPR register which is not done in current programming\nsequence. This change resets uartdm core i.e. receiver, transmitter, error\nstate, break condition, CTS and RFR which fixes the issue.\n\nWith this change, remove programming sequence used in startup as opening\nthe device node will always calls set_termios after startup.\n\nCRs-Fixed: 294380\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "c4b8b2fb9d783be26b85381b3618bbe253a75b89", "tree": "664f4284a638cfeca69550863956c7562d9029a4", "parents": [ "5cbaf3e1a8623325997247578800c49c82aa622a" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Tue Jul 12 13:32:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:34 2011 -0700" }, "message": "msm_fb: display: change mdp clock while mdp is idle\n\nMdp clock need to be adjusted at run time base on the\nperformance level. However mdp clock can only be changed\nwhen mdp blending/dma engine is idle.\n\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "5cbaf3e1a8623325997247578800c49c82aa622a", "tree": "25f84cbfce5edcdf8f81cf564d1b2598ef6c2d8a", "parents": [ "c001dc31f98aad02259b31951c6c48067454273a" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Thu Jul 21 11:14:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:34 2011 -0700" }, "message": "msm-camera: fix subsystem ID address in JPEG\n\nThe address of the subsystem id stored in the jpeg\nbuffer structure was becoming invalid. This happened\nbecause the buffer used for mapping was copied over to\na duplicate place and the second buffer was used for\nunmapping, while the first one was freed.\n\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "c001dc31f98aad02259b31951c6c48067454273a", "tree": "148d2f42eae9c2d146adc5e87d1a65472aad92c6", "parents": [ "53a9083107fbb4df41b22b15f56501b920a0f61d" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Fri Jul 15 13:51:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:33 2011 -0700" }, "message": "camera: vfe32: Enable Zero Shutter Lag mode support.\n\n- Add bus scaling table for ZSL mode.\n- Add AXI configuration and interrupts handling for ZSL.\n- Add missing VFE commands of XBAR configuratin.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "53a9083107fbb4df41b22b15f56501b920a0f61d", "tree": "625f5caad691517a31595be29685d79d228e3c72", "parents": [ "ca681569d396c54bb3a192bdc5434c5a889e0ce5" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Wed Jul 20 21:19:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:32 2011 -0700" }, "message": "msm-camera: fix the stop recording crash\n\ndo not swap ping/pong buffer when no free buffer\n\nCRs-fixed: 296858\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "ca681569d396c54bb3a192bdc5434c5a889e0ce5", "tree": "2fbfefd13569f73ca74a88601e21304032f005d1", "parents": [ "c6864b8db38bd6ee700d862df15380eb95234c25" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Mon Jul 25 20:44:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:32 2011 -0700" }, "message": "msm-camera: initial vpe and divert frame implementation\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "c6864b8db38bd6ee700d862df15380eb95234c25", "tree": "18e204098354b30563684ceff3863b21d1e48531", "parents": [ "d71946b2ad838e897f450bb8d1ad6eb86bff7298" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Fri Jul 15 11:43:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:31 2011 -0700" }, "message": "msm-camera: add SMMU code for use with videobuf2 framework\n\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "d71946b2ad838e897f450bb8d1ad6eb86bff7298", "tree": "a35756cab2d3e5d0c595fbe48bb0f83110d1d867", "parents": [ "4950550ed4974d3f971892777bab9bc074cecc2c" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Tue Jul 19 15:10:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:30 2011 -0700" }, "message": "msm-camera: v4l2: Use ktime_get_ts to get timestamp.\n\nUsing ktime_get_ts and converting to timeval matches\nwith system time in user space. This eliminates the\nAV sync issue between video and audio.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "4950550ed4974d3f971892777bab9bc074cecc2c", "tree": "b37878f7b1da8699b3b8795ba3512da9d51a8ce0", "parents": [ "0fb9dcfbc652ed617ceb244bd8a9201d00a124fe" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Tue Jul 19 20:44:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:30 2011 -0700" }, "message": "msm: Add new msm_buffer and event structs and event defines\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "0fb9dcfbc652ed617ceb244bd8a9201d00a124fe", "tree": "b39114063f8d400ad220566cd25b92f79589683d", "parents": [ "9812bd34ec034b4a78ed1c1c5f6fbd1ca3d1b43e" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Sun Jul 17 12:31:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:29 2011 -0700" }, "message": "msm-camera: configure preview and recording buffers\nseperately.\n\ndecouple preview and recording path configuration\nby configuring the buffers during preview start\nand recording start respectively.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "9812bd34ec034b4a78ed1c1c5f6fbd1ca3d1b43e", "tree": "63cb1ccdc000bc4bb1b4d41b1b42a6be066feb8f", "parents": [ "7323b78c60c986f268ac4aeb6a2493082fd63cd5" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Fri Jul 22 22:57:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:28 2011 -0700" }, "message": "msm camera: migrate to videobuf2 framework\n\nadd necessary changes in camera driver to\nmigrate to videobuf2 framework.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n\nConflicts:\n\n\tdrivers/media/video/Makefile\n" }, { "commit": "7323b78c60c986f268ac4aeb6a2493082fd63cd5", "tree": "14118f95fd8ade7502923475f46f9251ea672bd0", "parents": [ "f614c7221e4b92d0f3c16a8876f24af5b2880bc4" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Jul 25 13:23:59 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:28 2011 -0700" }, "message": "msm: 8x60: remove always ON vote for eMMC VCC rail\n\neMMC card can be put in sleep by sending CMD5 during suspend\nso we can turn off the eMMC VCC rail to save power.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "f614c7221e4b92d0f3c16a8876f24af5b2880bc4", "tree": "9fb54bbdaba6ede994762b7f193ecb400f68f33c", "parents": [ "8df15da6615f4cbebdbd3fb6e97734a515027f96" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Thu Jul 21 17:20:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:27 2011 -0700" }, "message": "msm: 8960: remove always ON vote for eMMC VCC rail\n\neMMC card can be put in sleep by sending CMD5 during suspend\nso we can turn off the eMMC VCC rail to save power.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "8df15da6615f4cbebdbd3fb6e97734a515027f96", "tree": "9331e4807fe4457624028e9334cbb487dcd89f2f", "parents": [ "09fd3ad1c66a791aa54f1ded42eeb7c7c5c7746e" ], "author": { "name": "Balaji T K", "email": "balajitk@ti.com", "time": "Wed Jul 13 20:06:27 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:27 2011 -0700" }, "message": "mmc: core: put eMMC in sleep (cmd5) mode before suspend\n\nPut MMC to sleep if it supports SLEEP/AWAKE (CMD5) in the mmc suspend\nto minimize power consumption.\n\nSigned-off-by: Balaji T K \u003cbalajitk@ti.com\u003e\nAcked-by: Venkatraman S \u003csvenkatr@ti.com\u003e\nSigned-off-by: Chris Ball \u003ccjb@laptop.org\u003e\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "09fd3ad1c66a791aa54f1ded42eeb7c7c5c7746e", "tree": "36fc48d9d8059a978fdac5e757b1c88bbb9aa985", "parents": [ "650c22c765b832bd383c310294dc52c4e3fa7255" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Thu Jul 14 09:12:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:26 2011 -0700" }, "message": "hw_random: msm: Remove PRNG hardware configuration\n\nLSFR and CONFIG registers are configured by secure domain\ncode and XPU protected.\n\nCRs-Fixed: 284133\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "650c22c765b832bd383c310294dc52c4e3fa7255", "tree": "3a832f3065e304dff2b4ce70fdee65668999a60f", "parents": [ "f9258172263a39b1cb5661ecbf2967c4de968e28" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Tue Jul 19 09:54:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:25 2011 -0700" }, "message": "crypto: Fix race conditons and synchronization issues\n\n- Fix locking mechanism: Add ref count for locking and\n protect ce lock reference count\n- Fix race conditions with processing sha request.\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "f9258172263a39b1cb5661ecbf2967c4de968e28", "tree": "4332f372fa66d3a34826a6e7068d9bf109d3d3b4", "parents": [ "7661a450d98b94a655373c0e5d5d79749b2ff6e2" ], "author": { "name": "Rajesha Kini", "email": "rkini@codeaurora.org", "time": "Wed Jul 20 21:51:55 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:25 2011 -0700" }, "message": "msm: audio: voicepcm: Added snd pcm client driver\n\nAdded support for snd pcm client driver. Which\nprovides interface to write pcm samples to voice path.\n\nSigned-off-by: Rajesha Kini \u003crkini@codeaurora.org\u003e\n" }, { "commit": "7661a450d98b94a655373c0e5d5d79749b2ff6e2", "tree": "1982bbbec2e045899f7ad9cfaae5c3f13cfb0a82", "parents": [ "5a19c68d63da33710ed52a974a996f03a706b84f" ], "author": { "name": "Sahitya Tummala", "email": "stummala@codeaurora.org", "time": "Mon Jul 18 13:28:35 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:24 2011 -0700" }, "message": "mmc: msm_sdcc: Add debug prints to runtime suspend/resume\n\nSigned-off-by: Sahitya Tummala \u003cstummala@codeaurora.org\u003e\n" }, { "commit": "5a19c68d63da33710ed52a974a996f03a706b84f", "tree": "33799729701b9b6af844c55f55053b69045bdab6", "parents": [ "373d1d02ff733804598a6a1894c42dcc9978abbe" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Sat Jul 23 11:34:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:23 2011 -0700" }, "message": "Revert \"msm: camera: YV12 video support\"\n\nThis reverts commit 66882a5046143601429632a0b589d9ffeeb3c668.\nThis change will be submitted later.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "373d1d02ff733804598a6a1894c42dcc9978abbe", "tree": "0d48297623b8a78b379f009bcbe1ac23c9671ba3", "parents": [ "c7c0db6840c8d6b28938857eb208c67f1696516e" ], "author": { "name": "Jeffrey Chuang", "email": "fchuang@codeaurora.org", "time": "Fri Jul 22 16:49:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:22 2011 -0700" }, "message": "Revert \"Revert \"msm: 8960: Enable bus scaling on 8960\".\"\n\nThis reverts commit 133580fadbade969050b2a8dd9f7e9451397bfa7.\n\nSigned-off-by: Jeffrey Chuang \u003cfchuang@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/configs/msm8960_defconfig\n" }, { "commit": "c7c0db6840c8d6b28938857eb208c67f1696516e", "tree": "81b16037fc4a1735918d6ac0883b3fa19a553384", "parents": [ "d9040ad20570c394de4104d151a50cb1944cb756" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Wed Jul 20 13:07:29 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:22 2011 -0700" }, "message": "msm: msm_bus: Interleaving related corrections\n\nFix the division of bandwidth between slaves with multiple ports.\nSince, interleaving changes involve exposing multiple ports for\na given master, config functions need to be changed for\nhalting/unhalting the right ports.\n\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "d9040ad20570c394de4104d151a50cb1944cb756", "tree": "15ba6e140bd9775ea81f86a8d6d6a7ece076f7db", "parents": [ "b4126da5e8d59ea9dcd951a8824c8ad90a517bd1" ], "author": { "name": "Eugene Seah", "email": "eseah@codeaurora.org", "time": "Mon Jul 11 13:20:54 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:21 2011 -0700" }, "message": "msm: rpm: Update System Fabric ARB RPM-id mapping on 8960\n\nSystem Fabric ARB RPM resource was changed from 27 to 29 4-byte words,\nupdate the RPM-id mapping to reflect this.\n\nSigned-off-by: Eugene Seah \u003ceseah@codeaurora.org\u003e\n" }, { "commit": "b4126da5e8d59ea9dcd951a8824c8ad90a517bd1", "tree": "9aecf45748517d14ee4afa97dca6139cc327c672", "parents": [ "f1fdaffaa75daf8323e5d514bb1cb0bac0c2f84e" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Mon Jul 18 14:31:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:21 2011 -0700" }, "message": "msm: automatically size unstable memory on 8960\n\nOn 8960, all memory banks except the lowest one\n(where the kernel lives) are unstable (i.e. may\nbe powered off under DMM).\n\nThis patch temporarily hard codes the bank\nsize to 512M, a later patch will allow us to\nobtain this from shared memory.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "f1fdaffaa75daf8323e5d514bb1cb0bac0c2f84e", "tree": "bd9e010eff50baecb631cb2b0af717f407cf7e9d", "parents": [ "675b31fc19e7da56c281268a792a4590d334e094" ], "author": { "name": "Gregory Bean", "email": "gbean@codeaurora.org", "time": "Fri Jul 22 11:12:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:20 2011 -0700" }, "message": "checkpatch: remove \u0027static const char * const\u0027 check\n\nWhile this check is valid in theory, it generates a plethora\nof false positives on ALSA drivers and ends up causing more trouble\nthan it saves.\n\nSigned-off-by: Gregory Bean \u003cgbean@codeaurora.org\u003e\n" }, { "commit": "675b31fc19e7da56c281268a792a4590d334e094", "tree": "f248b56df7d3b2e07556750d4d022fb16f6ef7cf", "parents": [ "d3fb9bb50ca92263f402888dd437ff5bf18dd95d" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Tue Jul 19 10:37:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:19 2011 -0700" }, "message": "msm: Allow iova address alignment specification\n\nSome clients have specific alignment requirements for\niova addresses. Allow those requirements to be specified\nvia the upper bits of the flag field. Since all iommu\nalignment must be at least 4k, the lower bits can specify\nother options while the upper bits specify the alignment.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "d3fb9bb50ca92263f402888dd437ff5bf18dd95d", "tree": "09a162fb9819b4afd0991727d0992ef830232504", "parents": [ "29eb744d8dfb83c309ef22589ee20b63bbb7080c" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Tue Jul 12 17:20:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:19 2011 -0700" }, "message": "usb: gsmd: Add platform driver corresponding to smd channel\n\nUSB shared memory DUN(dial up networking) driver re-tries multiple times\nto open smd channel, due to delay in smd driver initialization and modem\nload during boot up. Instead, register a platform driver with smd channel\nname. Whenever specific SMD channel is opened by modem, a corresponding\nplatform device would be added resulting in probe of platform driver being\ncalled. In the probe function, DUN driver opens up SMD channel\n\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "29eb744d8dfb83c309ef22589ee20b63bbb7080c", "tree": "3d175c09b9605f49185d80d08ae47bb4e96e27da", "parents": [ "c6299dea34ba663b81af74a90305b67031683aff" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Mon Jun 20 11:06:29 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:18 2011 -0700" }, "message": "ASoC: msm: qdsp6: Add out of band calibration in voice driver\n\nAdd codes to send physical address and memory size to\nq6 on out of band calibration.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "c6299dea34ba663b81af74a90305b67031683aff", "tree": "c9d50b51bcf67166095796d130656009fa2f3668", "parents": [ "ee1840950afc0eead0f146f945b9f853417cb131" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Thu Jul 21 18:18:53 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:17 2011 -0700" }, "message": "msm: sdio_dmux: Clear pending write queue after reset notification\n\nFix issue where clients can get notifications of failed\nwrites before they are notified that a reset has occurred.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "ee1840950afc0eead0f146f945b9f853417cb131", "tree": "66f7c1434bbffb7507902c733f8d4db6eabdadc9", "parents": [ "ff6fbae218452a546924bc015a4b5def42281e74" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Jul 20 18:56:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:17 2011 -0700" }, "message": "msm: clock-8960: Remove unnecessary halt_check initialization\n\nThe halt_check field defaults to HALT. Remove explicit\ninitialization to this default value.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "ff6fbae218452a546924bc015a4b5def42281e74", "tree": "c7ff2e1b9d00b0f071e8470bf89e8b9a74b4b013", "parents": [ "7ff0cf49995d22fddaa90cea95dac8850abcac89" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Thu Jun 09 11:13:19 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:16 2011 -0700" }, "message": "msm: ipc: Add support for subsystem restart in MSM_IPC Router\n\nWhen a remote processor restarts, the transport corresponding to that\nnode notifies the MSM_IPC Router of that event. MSM_IPC Router cleans\nup the data structures corresponding to that transport and notifies\nthe local clients/servers of removal of all the concerned remote\nservers/clients respectively. When the remote node comes up and\nbroadcasts the server information, local clients will be notified of\nthe arrival of the server so that they can continue communication with\nthe server.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "7ff0cf49995d22fddaa90cea95dac8850abcac89", "tree": "5ebc5e1efa7a5c332d10e4a6384758dded7d1ebd", "parents": [ "d42d1206083796119de7d0ea1cc06b14f7f42884" ], "author": { "name": "Azam Sadiq Pasha Kapatrala Syed", "email": "akapatra@codeaurora.org", "time": "Fri Jul 15 15:56:40 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:16 2011 -0700" }, "message": "msm: camera: YV12 video support\n\nSupport for color format YV12.\n\nSigned-off-by: Azam Sadiq Pasha Kapatrala Syed \u003cakapatra@codeaurora.org\u003e\n" }, { "commit": "d42d1206083796119de7d0ea1cc06b14f7f42884", "tree": "075434e2245447bf353ba42b056b49da5f6ef388", "parents": [ "a416c4953aede201b820104aa795f44286fba621" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Jul 20 14:49:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:15 2011 -0700" }, "message": "msm: charm: Don\u0027t complete charm_boot on power up\n\nThe first time the target boots up, complete(charm_boot) is\ncalled. Subsystem restart assumes that complete(charm_boot)\nhas never been called before the first time. This can result\nin the charm code getting into a bad state. Fix this by not\ncalling complete on bootup.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "a416c4953aede201b820104aa795f44286fba621", "tree": "aec84b9d8a1587c392c47ffdbe833eeaf95d7f67", "parents": [ "bc9034da68c8f6c2d15bb219f0dded8d827208ea" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Fri Jul 22 20:20:23 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:14 2011 -0700" }, "message": "msm: board-msm7x27a: Move misc initialization to init_machine\n\nMove msm7x2x_misc_init() to init_machine stage because\nacpuclock initialization should not happen before timer\ndriver initializing the lpj.\n\nCRs-Fixed: 295455\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "bc9034da68c8f6c2d15bb219f0dded8d827208ea", "tree": "096b1651ba533dcee8959bdf3c0c2c1923151959", "parents": [ "cc65b5bf5aacc3498764f70f9b545817d1a9e4f5" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Fri Jul 08 18:18:25 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:14 2011 -0700" }, "message": "ASoc: msm: Add mixer command to set tty mode\n\nAdd mixer command for setting tty mode in voice platform\ndriver.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "cc65b5bf5aacc3498764f70f9b545817d1a9e4f5", "tree": "0f16f0f2668bc76d719db8a9defd2de2bbbfbd32", "parents": [ "4eb0293d54b082e0385937f1f5b3df5ab08bd24e" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Wed Jul 06 19:14:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:13 2011 -0700" }, "message": "ASoc: msm: qdsp6: Add APIs for setting and getting tty mode\n\nAdd setting and getting tty mode APIs in voice native driver.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "4eb0293d54b082e0385937f1f5b3df5ab08bd24e", "tree": "0ed6063a013bffd262a16aa2fd80b8cde71acca4", "parents": [ "9f4b429eb3c41a15fcba2a01074f9f6ef4541a33" ], "author": { "name": "Marek Szyprowski", "email": "m.szyprowski@samsung.com", "time": "Fri Mar 11 06:07:27 2011 -0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:12 2011 -0700" }, "message": "[media] v4l2: vb2: one more fix for REQBUFS()\n\nReturn immediately if the target number of buffers is the same as\nthe current one and memory access type doesn\u0027t change.\n\nSigned-off-by: Marek Szyprowski \u003cm.szyprowski@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "9f4b429eb3c41a15fcba2a01074f9f6ef4541a33", "tree": "e9356390f604164bdc55eb568ed177d142b1d605", "parents": [ "4fa2ee4cb9484c59336476c52f21cc3b97fd8fd2" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Sat Jul 16 22:11:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:12 2011 -0700" }, "message": "ASoC: msm: Change channel mode mixer control to enumeration\n\nChange existing mixer control to enumeration type so range\nis fixed and input value is more readable.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "4fa2ee4cb9484c59336476c52f21cc3b97fd8fd2", "tree": "f88d54e2522ce6b5d1892191a7d15ea21a7c7335", "parents": [ "c49b85db0baedf56bf784462f9a44038253fc44a" ], "author": { "name": "Jay Wang", "email": "jaywang@codeaurora.org", "time": "Mon Jul 18 00:21:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:11 2011 -0700" }, "message": "ASoC: qdsp6: Sets the proper sampling rate for Fluence topology\n\nThe sampling rate of Fluence topology is either 16K or 8K. Therefore,\nwe need to reduce the ADM sampling rate to 16K during recording with\nFluence topology\n\nSigned-off-by: Jay Wang \u003cjaywang@codeaurora.org\u003e\n" }, { "commit": "c49b85db0baedf56bf784462f9a44038253fc44a", "tree": "74ec11f46c618d5f661fea2d34115426e570db3d", "parents": [ "6d6ff5e495a12895b5b4a37eb3049fda560c693a" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Fri Jul 15 18:55:34 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:11 2011 -0700" }, "message": "msm: audio: qdsp6v2: Support for RX \u0026 TX ADM topology\n\nThis adds support to store separate RX \u0026 TX topology for\nthe audio device manager (ADM).\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "6d6ff5e495a12895b5b4a37eb3049fda560c693a", "tree": "b5cd07de965ec13e579dc70d1d2791e8ecaabe26", "parents": [ "f74d2edd791b3fddaf147c5e358a8f41463dc1f9" ], "author": { "name": "Mansoor Aftab", "email": "maftab@codeaurora.org", "time": "Wed Jul 20 17:25:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:10 2011 -0700" }, "message": "msm: camera: Correct mount angle, sensor type values\n\nCorrect the sensor type value for the IMX074 sensor.\nSet the mount angle value for this sensor on 8960,\nalso made sure that the values obtained for angle,type\nfrom probing are recorded in the structure which used\nto retrieve this information during device query.\n\nCRs-fixed: 296576\nSigned-off-by: Mansoor Aftab \u003cmaftab@codeaurora.org\u003e\n" }, { "commit": "f74d2edd791b3fddaf147c5e358a8f41463dc1f9", "tree": "a884366ec0e69231025bfe72e4f338d851c93cc8", "parents": [ "61fe47257aa9fa598163dda4a3938090bf7d95c6" ], "author": { "name": "Manoj Rao", "email": "manojraj@codeaurora.org", "time": "Mon Jul 18 14:25:38 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:09 2011 -0700" }, "message": "msm: display: HDMI: ISR not triggered when HPD occurs during power_off\n\nDuring power off we disable 5v, power down core, by turning off the\nTX channels one by one. When a HPD is triggered the driver has a\nsoftware debouncing timer during which interrupts are disabled to\nbe able to read stable HPD status from the register. When HPD is\ndetected while the core is being turned off/powered down the driver\u0027s\nsoftware disables the interrupt and this was making the core to go\ninto off state. So the fix was to keep the interrupt bit enabled through\nthe register even during the debounce timeout (this doesn\u0027t trigger\nunnecessary interrupts due to appropriate clearing and masking of HPD\ninterrupt bits).\n\nSigned-off-by: Manoj Rao \u003cmanojraj@codeaurora.org\u003e\n" }, { "commit": "61fe47257aa9fa598163dda4a3938090bf7d95c6", "tree": "8fd33d2589be9c5be3f2da6975b75102514d3654", "parents": [ "b4f562ae36c45a1f0df24f7606e2eeb34f9a9aa3" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Tue Jul 12 14:09:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:09 2011 -0700" }, "message": "msm: arch_add_memory should only perform logical memory hotplug\n\nThe function arch_add_memory() should only perform logical\nmemory hotplug, but it was also improperly performing\nphysical memory hotplug. Even worse, it was adding pages\nto the free list before the memory bank they were in\nwas powered on.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "b4f562ae36c45a1f0df24f7606e2eeb34f9a9aa3", "tree": "1577c13c1bca79962b754d12f16b216dbf5773b7", "parents": [ "d828aeac5fdcd9a8b608a2379a8f54a195fb30c9" ], "author": { "name": "Ben Romberger", "email": "bromberg@codeaurora.org", "time": "Wed Jul 13 19:57:54 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:08 2011 -0700" }, "message": "msm: audio: qdsp6v2: Support for out-of-band calibration\n\nTo support sending of calibration in physical shared memory\nthe number of voice volume steps is only sent in the first\nvoice volume calibration block. This means that all products\nthat do not support out-of-band calibration have to pull\nthe number of voice volume steps from the first buffer and\nplace it into the rest of the buffers.\n\nSigned-off-by: Ben Romberger \u003cbromberg@codeaurora.org\u003e\n" }, { "commit": "d828aeac5fdcd9a8b608a2379a8f54a195fb30c9", "tree": "ecb792dab212eab3f14712cba5301b33d9c3de62", "parents": [ "86ea12c1803145447a98a205456adb4ada65900c" ], "author": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Tue Jul 19 18:09:49 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:07 2011 -0700" }, "message": "msm: audio: qdsp5v2: Handle the VOICE_START event\n\nHandle VOICE START event when voice state is in voice change\nConsider the following case\nB calls A (A accept the call), voice state in voice acquire\nC calls A (A accept and B in hold) in this scenario following series\nOf events issue to voice driver\nVOICE_END (this event issues a device change command to modem, in turn\nModem changes the voice state from voice acquire to voice change)\n\nVOICE_START (this event is not changing the voice state from voice change\nTo voice acquire as a result mismatch in the voice state maintained by\nVoice proxy driver)\n\nThis patch change the voice state from voice change to voice acquire\nWhen VOICE_START event received and voice state is in voice change\n\nCRs-Fixed: 295375\nSigned-off-by: Santosh Mardi \u003cgsantosh@codeaurora.org\u003e\n" }, { "commit": "86ea12c1803145447a98a205456adb4ada65900c", "tree": "b69397e80e7317a12d571e66e5fdedbeec0b40d0", "parents": [ "229c6a5dc09fa4981088ffe4929f1bcb3ce70e37" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Mon Jul 18 14:10:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:07 2011 -0700" }, "message": "msm: clock-local: Remove rcg_clk_set_max_rate()\n\nIf this function doesn\u0027t exist the generic clock layer returns\n-ENOSYS which should be sufficient enough to signal that it isn\u0027t\nsupported.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "229c6a5dc09fa4981088ffe4929f1bcb3ce70e37", "tree": "01f2240cc09183b6a562253b2406e029db12fb24", "parents": [ "a21d6bc64b41a8eaa61a7822a255c8910bf113f4" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Tue Jul 12 16:18:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:06 2011 -0700" }, "message": "ASoC: WCD9310: Add Active Noise Cancellation support\n\nANC is a feature which reduces noise on the near-end\nby pushing anti-noise onto the audio stream heard\nby the user. ANC mixes the anti-noise signal\ninside of the WCD9310 codec.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "a21d6bc64b41a8eaa61a7822a255c8910bf113f4", "tree": "5d89d9a4b7fea9cd9f743a5faedfed0217bdcb39", "parents": [ "e8698c6756d6b274319770f65b882939f537a9ed" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Sun Jul 17 21:19:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:05 2011 -0700" }, "message": "ASoc: msm8960: Enable Physical DMIC1(on Fluid and MTP) and DMIC4(on Fluid).\n\nPhysical Digital MIC 1 on Fluid and MTP is there on Front Bottom Left.\nIt is connected D_DMIC1_2_data pin on Tabla and drives data on right\nchannel which is treated as DMIC2 input. Physical Digital MIC 4 on\nFluid is there on Back top. It is connected D_DMIC3_4_data pin on\nTabla and drives data on left channel which is treated as DMIC3 input.\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "e8698c6756d6b274319770f65b882939f537a9ed", "tree": "8dd18f37dd2437b8f0db2607710a9d7fe0d1cf3c", "parents": [ "4b85a2f2f21054bfb52c055026865af8dceef318" ], "author": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Wed Jul 20 20:43:05 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:05 2011 -0700" }, "message": "board: msm7x27a: BT GPIO is not toggled when I/O Expander fails.\n\nBahama\u0027s SYS RESET GPIO is put in LOW state in bahama shutdown,\n only when the GPIO is available from the I/O expander.\n\nSigned-off-by: Rahul Kashyap \u003crkashyap@codeaurora.org\u003e\n" }, { "commit": "4b85a2f2f21054bfb52c055026865af8dceef318", "tree": "86400b1dd088b92a0697297983f31be61c9b0f66", "parents": [ "49a83b2caa9718d35fab9a9fa9ad2d9436040ffd" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Wed Jul 20 18:04:40 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:04 2011 -0700" }, "message": "msm: rpc: Reset modem_reset flag in SDIO xprt\u0027s probe function\n\nAlways reset the modem_reset flag in rpcrouter_sdio_remote_probe function.\nElse repeating failed modem restart attempts, cause the probe to free the\nalready freed resources and hence cause a crash.\n\nCRs-Fixed: 295677\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "49a83b2caa9718d35fab9a9fa9ad2d9436040ffd", "tree": "d2eacc67cfe8f9cac6b757f6aef245472b41179b", "parents": [ "2c79e3d914f4626b9e87796c8fe817a715f8c9ad" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Wed Jul 20 15:28:44 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:04 2011 -0700" }, "message": "msm_fb: display: Fix 8960 HDMI resolution switch issue\n\nFix 8960 HDMI resolution switch issue by removing core\nreset via clock branches. This helps in retaining the\nHDMI PLL register values for subsequent cable\ndisconnect/connect scenarios.\n\nCRs-Fixed: 296879\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "2c79e3d914f4626b9e87796c8fe817a715f8c9ad", "tree": "776f720aedc829d9bb38604be01049ce1b36240b", "parents": [ "0d9acd9735d6311867aff690e13cfa6d791ad3a1" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Mon Jul 18 18:13:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:03 2011 -0700" }, "message": "ASoC: msm: change playback closing sequence\n\nCurrently, ASM buffers are freed before closing\nASM stream in the closing function. ASM in QDSP6\ncan still be actively accessing buffers. Existing\nsequence can result in QDSP6 crash. Adjust\nthe closing sequence.\n\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "0d9acd9735d6311867aff690e13cfa6d791ad3a1", "tree": "663b4a25a5d647bd5bb0359e07ca35f60e32294c", "parents": [ "a267ea929e905debab3c7444c6e6a4263b8346e4" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Mon Jul 04 21:31:30 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:02 2011 -0700" }, "message": "misc: pm8058-pwm: add pr_fmt to simplify debug messages\n\nAdding pr_fmt with __func__ to simplify the debug messages which\nneed to print out __func__.\n\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "a267ea929e905debab3c7444c6e6a4263b8346e4", "tree": "055f2cd1dd0af3eed529347561c8e4169837b885", "parents": [ "d06ac74275f7743c60ab5462c9e5d0012508bb07" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Fri Jul 15 19:53:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:02 2011 -0700" }, "message": "msm: charm: Wait to start monitoring GPIOS\n\nWait until the external modem has completely booted up\nbefore monitoring the GPIO lines. Otherwise, there could\nbe noise on the lines which cause erroneous interrupts.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "d06ac74275f7743c60ab5462c9e5d0012508bb07", "tree": "4337ca11e80315ec8c64afeae23f19cc769fb26e", "parents": [ "cf45f6adece2ee2cb02c0c08883dc92b258ac153" ], "author": { "name": "Taniya Das", "email": "tdas@codeaurora.org", "time": "Tue Jul 19 12:55:28 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:01 2011 -0700" }, "message": "power: msm_battery: Disable DEBUG option to reduce log messages.\n\nSigned-off-by: Taniya Das \u003ctdas@codeaurora.org\u003e\n" }, { "commit": "cf45f6adece2ee2cb02c0c08883dc92b258ac153", "tree": "169fb1b4301a8a1e4ad10a3e3d43923b4f91acb4", "parents": [ "cc6ffa066535e8affd02e5bca118533ed7d3376a" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Sun Jul 17 21:10:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:00 2011 -0700" }, "message": "ASoC: WCD9310: Enable DMIC2 and DMIC3 inputs\n\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "cc6ffa066535e8affd02e5bca118533ed7d3376a", "tree": "c5d7e0b1c3313c3c31e416a04808519d677d061e", "parents": [ "0d77e1b6f171e2452a6269a5e0172de6b8df3f5b" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu Jul 14 18:35:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:26:00 2011 -0700" }, "message": "ASoC: WCD9310: Enable Analog Input 3 and 4\n\nAdds logic to enable analog input 3 and analog\ninput 4. These inputs use external microphone\nbias 3 and 4 respectively on the CDP only.\nAdds all possible routes in the codec for each\nof the inputs.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "0d77e1b6f171e2452a6269a5e0172de6b8df3f5b", "tree": "561465f5dc38a21277bc292d81bdf37e04ee20d6", "parents": [ "69b0096584918d40428263d706c1fb8787bb562a" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Jul 08 10:54:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:59 2011 -0700" }, "message": "ASoC: WCD9310: Enable Analog Inputs 5 and 6\n\nAdds logic to enable the analog Input 5 and 6.\nThese inputs do not need a microphone bias to\nbe enabled.\n\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "69b0096584918d40428263d706c1fb8787bb562a", "tree": "822bd8cf5b88a0400d93045ecc942e94b6dc1553", "parents": [ "3ff8daeeeeec6614aa019fbc54e3e8fe708f03ee" ], "author": { "name": "Helen Zeng", "email": "xiaoyunz@codeaurora.org", "time": "Fri Jul 08 11:38:36 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:59 2011 -0700" }, "message": "Asoc: msm: qdsp6: Update MVM commands\n\nUpdate MVM commands from depreciated APIs to the new APIs.\n\nSigned-off-by: Helen Zeng \u003cxiaoyunz@codeaurora.org\u003e\n" }, { "commit": "3ff8daeeeeec6614aa019fbc54e3e8fe708f03ee", "tree": "e005351374cd157b09a6f6daa7c5d9a3fb778be0", "parents": [ "78aa5e76b1748301c84cf9540ab99be70c6ac8be" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Tue Jul 19 18:50:15 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:58 2011 -0700" }, "message": "msm: sdio_dmux: do subsystem restart client notification earlier\n\nPerform the receive_cb(NULL) notification before cleaning\nup any pending write skb\u0027s. This allows clients to update\ntheir cached reset status based upon the\nreceive_cb(NULL) in case they need to do special\nhandling of the cancelled write skb\u0027s.\n\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "78aa5e76b1748301c84cf9540ab99be70c6ac8be", "tree": "fc333ab316fab85448d8cfbe19a0c62c1a9be176", "parents": [ "f63a88968a5f432d14cbb5f3c700b924a90177f2" ], "author": { "name": "Eugene Seah", "email": "eseah@codeaurora.org", "time": "Mon Jul 18 18:28:37 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:57 2011 -0700" }, "message": "msm: rpm: Enable RPM SWFI correctly on startup and sysfs\n\nEnable RPM SWFI on startup with Apps active set instead of sleep set.\nWhen setting the value via sysfs, send the request immediately\ninstead of waiting for Apps sleep.\n\nSigned-off-by: Eugene Seah \u003ceseah@codeaurora.org\u003e\n" }, { "commit": "f63a88968a5f432d14cbb5f3c700b924a90177f2", "tree": "9561ab72e2e6b0791e13b918f2683323721b7046", "parents": [ "7cab7ff69929c80e7a933a6e425877a05ba63e19" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Wed Jun 15 16:44:46 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:57 2011 -0700" }, "message": "msm: clock-8x60: Add local control of vpe_axi_clk and vpe_axi_clk\n\nThe MAXI_EN2 register is no longer owned by the RPM. Add local\ncontrol of the VPE and Rotator AXI clocks which are in it.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "7cab7ff69929c80e7a933a6e425877a05ba63e19", "tree": "764f896606beae401c365361ac919d3f3dcf7554", "parents": [ "4c0ba6c1c623979f055f4d2e607326b83813220f" ], "author": { "name": "Jeff Ohlstein", "email": "johlstei@codeaurora.org", "time": "Thu Jul 14 18:03:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:56 2011 -0700" }, "message": "msm: restart: don\u0027t set INT_EN bit when enabling watchdog\n\nSetting the INT_EN bit means that the watchdog will start ticking as\nsoon as an IRQ or an FIQ comes in. There is no need for this, so don\u0027t\nset it.\n\nSigned-off-by: Jeff Ohlstein \u003cjohlstei@codeaurora.org\u003e\n" }, { "commit": "4c0ba6c1c623979f055f4d2e607326b83813220f", "tree": "e466b36ca2be3b547a4b3bfbe083df4df824c963", "parents": [ "d81678207da7c9bb936e98c4f7f917eff81f710a" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Jul 15 11:47:13 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:55 2011 -0700" }, "message": "msm: smd_tty: restrict DS port platform driver\n\nThe DS port will be opened from a kernel space client via platform\ndriver starting with 8660 fusion. Restrict the smd_tty platform driver\nto pre 8660 fusion to prevent conflicts.\n\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "d81678207da7c9bb936e98c4f7f917eff81f710a", "tree": "c356d0965728446c987fa9a635cbd6b6451b9443", "parents": [ "a411f7e5195777253d4c3c94430787b4f19ea068" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Jul 14 12:38:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:55 2011 -0700" }, "message": "vidc: Stop using vcodec_axi_a_clk and vcodec_axi_b_clk directly\n\nThese two clock are now implicityly enabled and disabled as\ndependencies of vcodec_clk (as was already the case for\nvcodec_axi_clk).\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "a411f7e5195777253d4c3c94430787b4f19ea068", "tree": "8fbd0ffa04d040a7b8659712a4ed3251c144c9ad", "parents": [ "910f724fa61f3b4f595e740f94bb1ed3eaee62b5" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Jul 20 13:21:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:54 2011 -0700" }, "message": "video: Kconfig: Remove extraneous dots from help text\n\nClean up the help text by removing extraneous punctuation.\n\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "910f724fa61f3b4f595e740f94bb1ed3eaee62b5", "tree": "ea4fae70dc8122be70ed2b6237d345c8ed4d21b3", "parents": [ "00548e64fe01e06b0ff24594b2959866bb5f9d10" ], "author": { "name": "Jeff Ohlstein", "email": "johlstei@codeaurora.org", "time": "Mon Jul 18 17:03:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:54 2011 -0700" }, "message": "arm: delay: annotate delay constant as unsigned long\n\nCurrently the __udelay function causes the following compiler warning\nwhen HZ is set to 1000:\n\narch/arm/lib/delay.c: In function __udelay:\narch/arm/lib/delay.c:88: warning: integer overflow in expression\n\nThe overflow does not occur if the constant is unsigned.\n\nSigned-off-by: Jeff Ohlstein \u003cjohlstei@codeaurora.org\u003e\n" }, { "commit": "00548e64fe01e06b0ff24594b2959866bb5f9d10", "tree": "87b949c3c511eac298889c66734cdaf2c4fca932", "parents": [ "3f75d16d6d7ad79bfb01c94cd049bfbbb3daeaae" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Mon Jul 18 12:13:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:53 2011 -0700" }, "message": "mfd: pm8921-adc: Remove setting USRP ADC IRQ bit permissions\n\nRemove setting the Secure processor permission bits from the\nuserprocessor for the ADC. The changes to set the IRQ bit\npermissions and the arbiter enable for the user bank are done\non the secure processor.\n\nCRs-Fixed: 296150\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "3f75d16d6d7ad79bfb01c94cd049bfbbb3daeaae", "tree": "85881861234843fddd5a9754b4e0eaf6e8c145da", "parents": [ "a7eadeaa24eb044bac38bfe783e4e56e33cdf254" ], "author": { "name": "Maya Spivak", "email": "mspivak@codeaurora.org", "time": "Wed Jul 06 09:43:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:52 2011 -0700" }, "message": "sched: Remove invalid cases from cpuset_cpu_active\n\nThis fixes a merge error from when updating from 2.6.35 kernel.\nThe case cpu_down_prepare/frozen is not present in the\ncpuset_cpu_active function in the kernel which the QUIC kernel\nis based off of. The inclusion of this case hurts cpu_hotplug\nperformance on a cpu_down operation.\n\nSigned-off-by: Maya Spivak \u003cmspivak@codeaurora.org\u003e\n" }, { "commit": "a7eadeaa24eb044bac38bfe783e4e56e33cdf254", "tree": "c3c3368a801bfd4b2937b7a3c6d76e786f1eff20", "parents": [ "7835f31704868f7420cfaaac18a9c8a97e7e0062" ], "author": { "name": "Larry Bassel", "email": "lbassel@codeaurora.org", "time": "Thu Jul 14 10:46:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:52 2011 -0700" }, "message": "msm: allow for platform-specific memory power routines\n\nWe now support more than one platform whose memory\ncan be turned on and off and whose way of doing so\ndiffers from platform to platform, so call the appropriate\nplatform-specific routine if one exists.\n\nSigned-off-by: Larry Bassel \u003clbassel@codeaurora.org\u003e\n" }, { "commit": "7835f31704868f7420cfaaac18a9c8a97e7e0062", "tree": "b510b09ecacfbe57b2c281a499a1e91c1d28b188", "parents": [ "32edc1df5c5318a7614626ae2ab18fb9c62e594f" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Thu Jun 09 17:58:56 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:51 2011 -0700" }, "message": "msm: sdio_dmux: split SDIO mutex into read and write lock\n\nSplit single SDIO MUX lock into a read and write lock.\n\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "32edc1df5c5318a7614626ae2ab18fb9c62e594f", "tree": "06cb9ed65c029f07eb2b65e2af6db722958ca836", "parents": [ "5cd33b37653f4c32b9d8e992bab5938c37eae130" ], "author": { "name": "Eric Holmberg", "email": "eholmber@codeaurora.org", "time": "Wed Jun 01 14:20:08 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:50 2011 -0700" }, "message": "msm: sdio_dmux: split the workqueue in sdio_dmux\n\nAdds one reader and one writer single-threaded\nworkqueue.\n\nCRs-Fixed: 292652\nSigned-off-by: Eric Holmberg \u003ceholmber@codeaurora.org\u003e\n" }, { "commit": "5cd33b37653f4c32b9d8e992bab5938c37eae130", "tree": "1576740c74ae4192ace8f8131ab9e6b504d3fd67", "parents": [ "a5ee43644bcdcae9146349ba5163d991cfca1324" ], "author": { "name": "Shubhraprakash Das", "email": "sadas@codeaurora.org", "time": "Mon Jul 18 18:07:10 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:50 2011 -0700" }, "message": "mm: ashmem: Add cache clean and invalidate ioctls for ashmem\n\nCRs-fixed: 291124\nSigned-off-by: Shubhraprakash Das \u003csadas@codeaurora.org\u003e\n" }, { "commit": "a5ee43644bcdcae9146349ba5163d991cfca1324", "tree": "88005efd5af6628c6a358eec43c67271303956e2", "parents": [ "cb1e22f6f88af7fe0ad897142b4c31f110d653aa" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Fri Jul 15 13:48:48 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:49 2011 -0700" }, "message": "msm: smd_pkt: convert to strncmp()\n\nstrcmp() is deprecated. Convert to strncmp()\n\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "cb1e22f6f88af7fe0ad897142b4c31f110d653aa", "tree": "a06cf15b329a8872f06743d6607482e012e1e12c", "parents": [ "3b44cd4aeedfa3026caf379c4687d980ed3261b8" ], "author": { "name": "Jayasena Sangaraboina", "email": "jsanga@codeaurora.org", "time": "Mon Jul 18 10:36:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:49 2011 -0700" }, "message": "ASoC: msm: Add support for FM Volume.\n\nAdd support for FM Volume up,down and mute,unmute.\n\nSigned-off-by: Jayasena Sangaraboina \u003cjsanga@codeaurora.org\u003e\n" }, { "commit": "3b44cd4aeedfa3026caf379c4687d980ed3261b8", "tree": "1c8e9437a4a825474bb56dc3ab073834a81f01cf", "parents": [ "4aea274b69eeee685d87e159107f0d0eb9b35b70" ], "author": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Wed Jul 06 12:36:15 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:48 2011 -0700" }, "message": "radio-tavarua: Adding private control to configure the RMSSI threshold\n\nThis change is to add V4L2 private controls for configuring the\nvalue of RMSSI threshold.\n\nCRs-Fixed: 293328\nSigned-off-by: Anantha Krishnan \u003cananthk@codeaurora.org\u003e\n" }, { "commit": "4aea274b69eeee685d87e159107f0d0eb9b35b70", "tree": "085d78824442a615dd1f6f11b191391f000371dc", "parents": [ "131d2e7746b0f2e721bdff3af6506d1659db0c09" ], "author": { "name": "kuogee hsieh", "email": "khsieh@codeaurora.org", "time": "Wed Jul 06 11:05:05 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:47 2011 -0700" }, "message": "msm_fb: display: add 3D support at DSI video mode\n\nCurrently, only DSI command mode have 3D capability. Add 3D\nsupport for DSI video mode also.\n\nCRs-fixed: 294082\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "131d2e7746b0f2e721bdff3af6506d1659db0c09", "tree": "7ec2b7dfd9c000820fe791c2eeb63b843e9af0f8", "parents": [ "8d1f8724f0d89d474a283f2ba6f51801d14daaee" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Mon Jul 11 17:06:38 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:47 2011 -0700" }, "message": "msm_serial_hs_lite: Enable clock when configuring the GSBI\n\nEnable the bus clock when configuring the GSBI registers\nfor UART mode in the msm_serial_hs_lite driver.\n\nCRs-Fixed: 292755\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "8d1f8724f0d89d474a283f2ba6f51801d14daaee", "tree": "db23d15b14730d4b24011836d89b2b99ee496b09", "parents": [ "0a91160b3c418b8311bd7bf8016f318479c47229" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Thu Jul 14 18:45:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:46 2011 -0700" }, "message": "msm_fb: display: Fix writeback offset with correct fbnum\n\nFix writeback offset with correct fbnum value to avoid any\nmemory corruption with image buffers in use\n\nCRs-Fixed: 290324\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "0a91160b3c418b8311bd7bf8016f318479c47229", "tree": "8f98a64a2ffcb9e638d253a72fd1bda01fbfe14c", "parents": [ "7f12ebf6a27f4b892ee5729d574d71a2a8b4bed3" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Wed Jun 15 15:03:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:45 2011 -0700" }, "message": "mfd: pm8058: Locally disable regulators S0/1/3 and L21 during shutdown\n\nWhen shutting down or restarting, PMIC 8058 regulator S0, S1, S3 and\nL21 need to be managed manually. Since the master enable bits for these\nregulators are kept set, the local enable bits should be unset and the\nactive pull-down must be enabled. Any regulators in advanced mode\nshould be disabled as well. This regulator state ensures that\nthese regulators drops as expected when PS_HOLD is dropped.\n\nCRs-Fixed: 295731\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "7f12ebf6a27f4b892ee5729d574d71a2a8b4bed3", "tree": "375714c4acb4a984ebeef5114de68321425aca8f", "parents": [ "fd915311da98b8fd1b13d7b9cd3f23744c3720cb" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Mon Jul 18 17:14:39 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:45 2011 -0700" }, "message": "msm: kgsl: Remove unused variable w/ unneeded ifdef\n\nThis variable/ifdef should have been removed in a prior change.\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "fd915311da98b8fd1b13d7b9cd3f23744c3720cb", "tree": "8cc5c26f99b482cb0e1aa69fd6bcd66da549adc6", "parents": [ "0758e1eeda76e8d37cf929dddbe62ca5f6b26263" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Thu Jul 14 13:45:34 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:44 2011 -0700" }, "message": "msm: sdio: prevent modem sleep until completion of sleep sequence\n\n8k needs to prevent the modem from sleeping until it gets the\nPROG_DONE on the dummy CMD52, by keeping the SD clock on.\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "0758e1eeda76e8d37cf929dddbe62ca5f6b26263", "tree": "f0ec4a547ded7f619b00ec4abf1bed3a86120365", "parents": [ "57390b03ac1e24045fe4b056d84c091a0ee1e0d9" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jul 14 18:11:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:43 2011 -0700" }, "message": "power: pmic8058-charger: system power control\n\nThe pmic charger can control its supply to the system.\nThe msm_charger uses this facility to enable or disable\nthe pmic from providing system current.\n\nOn a setup with multiple charges, when the external charger\nis plugged in it provides the majority of the system current. This reduces\nthe current drawn from the pmic charger source (usb). If the pmic\nwere charging the battery, the reduction in the current drawn from\npmic charger source causes a charge completion interrupt in the pmic.\nNote that the pmic only monitors the current drawn from usb to signal\nend of charging. In this case, the interrupt is fired when the\nbattery may not be fully charged.\nMoreover when the pmic thinks that the battery is fully charged, it\nopens up the batfet and prevents any other charger from charging the\nbattery.\nWith this fix, when an external charger is plugged in the pmic is asked\nto stop providing system current which causes the pmic to close\nthe batfet.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "57390b03ac1e24045fe4b056d84c091a0ee1e0d9", "tree": "b848e945cce04cdfd9e9d48e494c7b428d4748bb", "parents": [ "0e468741095d4669b8716aa22c46d71fa64a6574" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jul 14 18:05:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:43 2011 -0700" }, "message": "power: msm_charger: control system power\n\nSome chargers can control their current supply for the system. Provide\nfacility in the msm_charger to choose which charger supplies system\ncurrent. It is guaranteed that start charging will always be called\non a charger that has been previously been asked to provide system\ncurrent.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "0e468741095d4669b8716aa22c46d71fa64a6574", "tree": "ba7713422b76b7bbe0f911eff20631e863ab5b3c", "parents": [ "4246251a693935b78e2672bbf75d1e2b40f4ce51" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Thu Jul 14 21:27:20 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:42 2011 -0700" }, "message": "msm: camera: Update OV2720 sensor settings\n\nIncrease output dimension to 1932X1092\nAdded in sensor roll off correction settings\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "4246251a693935b78e2672bbf75d1e2b40f4ce51", "tree": "5dbab7485fee1b1178417ae4a4dddd2f84701ce4", "parents": [ "85c05cd8d9e8e5d54c4cb23efebb3bdc6a9ff6c9" ], "author": { "name": "Ankur Nandwani", "email": "ankurn@codeaurora.org", "time": "Fri Jul 15 17:08:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:42 2011 -0700" }, "message": "radio: iris: updating the values for RDS PID and PTYPE\n\nSigned-off-by: Ankur Nandwani \u003cankurn@codeaurora.org\u003e\n" }, { "commit": "85c05cd8d9e8e5d54c4cb23efebb3bdc6a9ff6c9", "tree": "dfafb706aa25b9662fa05c3de8d3d1e5058b82ec", "parents": [ "c79a2e06447a6253f24142b0143ab9b1b2a1e488" ], "author": { "name": "Nishant Pandit", "email": "npandit@codeaurora.org", "time": "Sun Jul 10 11:33:14 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:41 2011 -0700" }, "message": "msm: camera: Configure the qs_s5k4e1 in 1 lane for 2d mode\n\nConfigure the qs_s5k4e1 sensor in 1 lane for 2D mode. This\nchange is made as a work around for hardware issue. As we\nswitch from 4 lane configuration in 3D mode to 2D configuration\nin 2 lane, the fifo in CSI Phy overflows. When 2D mode uses 1 lane\nconfiguration the FIFO is bypassed.\n\nCRs-fixed: 292608\nSigned-off-by: Nishant Pandit \u003cnpandit@codeaurora.org\u003e\n" }, { "commit": "c79a2e06447a6253f24142b0143ab9b1b2a1e488", "tree": "eb8d41528fdf6d509ba371cfc0f0a6bd727b6632", "parents": [ "882930f4949c12d0b020117b6f88eeace94045bd" ], "author": { "name": "David Ng", "email": "dave@codeaurora.org", "time": "Sat Mar 26 06:13:32 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:40 2011 -0700" }, "message": "msm: Add sysfs interface for mfreq\n\nAdd mfreq interface in sysfs. This forces the system to use the\nmaximum CPU clock on all CPU cores.\n(mfreq\u003d1 enables, mfreq\u003d0 disables)\n\nSigned-off-by: David Ng \u003cdave@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/cpufreq.c\n" }, { "commit": "882930f4949c12d0b020117b6f88eeace94045bd", "tree": "4d299add496482576864291a90cae4c3ba608685", "parents": [ "3f66eea8397fc777f0b4b23da365350fc0cbcbd0" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri Jul 08 17:51:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:25:40 2011 -0700" }, "message": "msm_fb: display: Add DTV bus scaling support for 8960\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" } ], "next": "3f66eea8397fc777f0b4b23da365350fc0cbcbd0" }