)]}'
{
  "log": [
    {
      "commit": "24ea602e183ca20a7577ebe253323d0e5d0f9847",
      "tree": "9cd9c0b3832cac2f155e633fbed1ce2bf3331f9a",
      "parents": [
        "f020979d5d7c9816c071d0aedf60a889fa4fae40"
      ],
      "author": {
        "name": "Albert Herranz",
        "email": "albert_herranz@yahoo.es",
        "time": "Tue Sep 08 19:30:12 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Sep 09 11:19:00 2009 -0400"
      },
      "message": "ssb: Implement SDIO host bus support\n\nAdd support for communicating with a Sonics Silicon Backplane through a\nSDIO interface, as found in the Nintendo Wii WLAN daughter card.\n\nThe Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with\na SDIO host interface.\n\nSigned-off-by: Albert Herranz \u003calbert_herranz@yahoo.es\u003e\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "06e4da268c0e8f3b8408403d65e47d2885a78ff2",
      "tree": "971fffcefbe06c5bba590953a06ced39947f1198",
      "parents": [
        "68ec53292c7f09056152efa9a6ee2591c794f08c"
      ],
      "author": {
        "name": "Gábor Stefanik",
        "email": "netrolller.3d@gmail.com",
        "time": "Wed Aug 26 20:51:26 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Aug 28 14:40:53 2009 -0400"
      },
      "message": "ssb: Implement PMU LDO control and use it in b43\n\nImplement the \"PMU LDO set voltage\" and \"PMU LDO PA ref enable\"\nfunctions, and use them during LP-PHY baseband init in b43.\n\nSigned-off-by: Gábor Stefanik \u003cnetrolller.3d@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "f679056b2fdd4e9b7c8eb42ba447cd9646236305",
      "tree": "d10c343cca51cbd2f720b99e78739a7719daa496",
      "parents": [
        "18889231e4527dfe23145efe318e74744794a95d"
      ],
      "author": {
        "name": "Gábor Stefanik",
        "email": "netrolller.3d@gmail.com",
        "time": "Mon Aug 10 21:23:08 2009 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Aug 14 09:14:02 2009 -0400"
      },
      "message": "ssb: Implement the remaining rev.8 SPROM vars needed for LP-PHY\n\nAlso add a \"SPEX32\" macro for extracting 32-bit SPROM variables.\n\nSigned-off-by: Gábor Stefanik \u003cnetrolller.3d@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "e79c1ba84c68de9161d541bd2bcc8ea65c89955c",
      "tree": "9399343651e9d92fb92f0c7bd6280353cb296913",
      "parents": [
        "e31ae0508315ebf5d8b1b8a1fca8550737fb3996"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Fri Feb 27 16:59:05 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Mar 05 14:39:32 2009 -0500"
      },
      "message": "ssb: Add SPROM fallback support\n\nThis adds SSB functionality to register a fallback SPROM image from the\narchitecture setup code.\n\nWeird architectures exist that have half-assed SSB devices without SPROM attached to\ntheir PCI busses. The architecture can register a fallback SPROM image that is\nused if no SPROM is found on the SSB device.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nCc: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "c9703146158c0415a60799570397e488bc982af5",
      "tree": "3928988b53a4dc6dba56acbdb53ef6fadaeb4a07",
      "parents": [
        "baf62eecfa75a26682efdfed0d74256992a47e6b"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Tue Feb 03 19:23:18 2009 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Feb 09 15:03:49 2009 -0500"
      },
      "message": "ssb: Add PMU support\n\nThis adds support for the SSB PMU.\nA PMU is found on Low-Power devices.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "6b1c7c67603efdf0b39f6056989b0f8194cdc1f3",
      "tree": "7086a0f862ce5f3e5d6e6cb0daca71193c4185f8",
      "parents": [
        "bb519bee07eed4fac9921ad658fb1f7ed78defb5"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Thu Dec 25 00:39:28 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Jan 29 15:59:38 2009 -0500"
      },
      "message": "b43/ssb: Add SPROM8 extraction and LP-PHY detection\n\nThis adds detection code for the LP-PHY and SPROM\nextraction code for version 8, which is needed by the LP-PHY and\nnewer N-PHY.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "fd0fcf5c29dd0339c5f5d86eb2cbe9fdad5bcd73",
      "tree": "3c03b581b0e069d45d4d35f234c16b663cdfa2af",
      "parents": [
        "9581483444d002e0b3807d9e66f552f372a6fc5e"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Thu Nov 06 10:49:21 2008 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Nov 10 13:50:19 2008 -0800"
      },
      "message": "ssb: Fix DMA-API compilation for non-PCI systems\n\nThis fixes compilation of the SSB DMA-API code on non-PCI platforms.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "31ce12fb3ebf88b054deb99ad729e84888bf6125",
      "tree": "c219fa9add1d2e40b446c680f4759d2cd57bf01a",
      "parents": [
        "f5fe1fdaae86a74d6977fafd8fdd8697e398dafd"
      ],
      "author": {
        "name": "Larry Finger",
        "email": "Larry.Finger@lwfinger.net",
        "time": "Wed Aug 20 17:45:06 2008 -0500"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Aug 29 16:24:07 2008 -0400"
      },
      "message": "ssb: Clean up extraction of MAC addresses from SPROM\n\nOnly rev 1 and 2 ssb SPROMs have fields named et0mac and et1mac;\nhowever, all of the extraction routines extract pseudo data for these\nfields from regions that are all 1\u0027s resulting in a hardware address\nof FF:FF:FF:FF:FF:FF. This patch forces such a fill at the beginning of\nthe data extraction process, and only does the formal extraction if the\nSPROM rev is 1 or 2.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "095f695cbb07281682462da0618fffabb499d0be",
      "tree": "b46e86b862d0c5928cc1829f22ebef1b57ecfc14",
      "parents": [
        "2f58bbf27fe5321a7a208be9071efc54e8a8a3bd"
      ],
      "author": {
        "name": "Larry Finger",
        "email": "Larry.Finger@lwfinger.net",
        "time": "Tue Aug 19 12:50:31 2008 -0500"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Aug 29 16:24:05 2008 -0400"
      },
      "message": "ssb: Update for Rev. 5 SPROM\n\nAlthough a revision 5 SPROM has not been seen in the wild, the\nopen-source portion of the MIPS driver 4.150.10.5 describes its\nlayout, which is mostly inherited from revision 4. This patch\nimplements the differences.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nAcked-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "8d8bb39b9eba32dd70e87fd5ad5c5dd4ba118e06",
      "tree": "64090a84f4c4466f9f30ff46c993e0cede379052",
      "parents": [
        "c485b465a031b6f9b9a51300e0ee1f86efc6db87"
      ],
      "author": {
        "name": "FUJITA Tomonori",
        "email": "fujita.tomonori@lab.ntt.co.jp",
        "time": "Fri Jul 25 19:44:49 2008 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sat Jul 26 12:00:03 2008 -0700"
      },
      "message": "dma-mapping: add the device argument to dma_mapping_error()\n\nAdd per-device dma_mapping_ops support for CONFIG_X86_64 as POWER\narchitecture does:\n\nThis enables us to cleanly fix the Calgary IOMMU issue that some devices\nare not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).\n\nI think that per-device dma_mapping_ops support would be also helpful for\nKVM people to support PCI passthrough but Andi thinks that this makes it\ndifficult to support the PCI passthrough (see the above thread).  So I\nCC\u0027ed this to KVM camp.  Comments are appreciated.\n\nA pointer to dma_mapping_ops to struct dev_archdata is added.  If the\npointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it\u0027s\nNULL, the system-wide dma_ops pointer is used as before.\n\nIf it\u0027s useful for KVM people, I plan to implement a mechanism to register\na hook called when a new pci (or dma capable) device is created (it works\nwith hot plugging).  It enables IOMMUs to set up an appropriate\ndma_mapping_ops per device.\n\nThe major obstacle is that dma_mapping_error doesn\u0027t take a pointer to the\ndevice unlike other DMA operations.  So x86 can\u0027t have dma_mapping_ops per\ndevice.  Note all the POWER IOMMUs use the same dma_mapping_error function\nso this is not a problem for POWER but x86 IOMMUs use different\ndma_mapping_error functions.\n\nThe first patch adds the device argument to dma_mapping_error.  The patch\nis trivial but large since it touches lots of drivers and dma-mapping.h in\nall the architecture.\n\nThis patch:\n\ndma_mapping_error() doesn\u0027t take a pointer to the device unlike other DMA\noperations.  So we can\u0027t have dma_mapping_ops per device.\n\nNote that POWER already has dma_mapping_ops per device but all the POWER\nIOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device\nargument.\n\n[akpm@linux-foundation.org: fix sge]\n[akpm@linux-foundation.org: fix svc_rdma]\n[akpm@linux-foundation.org: build fix]\n[akpm@linux-foundation.org: fix bnx2x]\n[akpm@linux-foundation.org: fix s2io]\n[akpm@linux-foundation.org: fix pasemi_mac]\n[akpm@linux-foundation.org: fix sdhci]\n[akpm@linux-foundation.org: build fix]\n[akpm@linux-foundation.org: fix sparc]\n[akpm@linux-foundation.org: fix ibmvscsi]\nSigned-off-by: FUJITA Tomonori \u003cfujita.tomonori@lab.ntt.co.jp\u003e\nCc: Muli Ben-Yehuda \u003cmuli@il.ibm.com\u003e\nCc: Andi Kleen \u003candi@firstfloor.org\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Avi Kivity \u003cavi@qumranet.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "9c0c7a429a0cf02c2ac1998d5cf4c26f6be5c989",
      "tree": "8a2ebc3ddfeb9933601d9c966e4d454b93781819",
      "parents": [
        "bd88a7812f1afd50549f3789cacb707b983fef54"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Wed Jul 09 15:48:45 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Jul 14 14:52:56 2008 -0400"
      },
      "message": "ssb: Include dma-mapping.h\n\nssb.h implements DMA mapping functions, so it should\ninclude dma-mapping.h. This fixes compile failures on certain architectures.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "f225763a7d6c92c4932dbd528437997078496fcc",
      "tree": "5d787c7c0bdabcf72e98603a85672ebe95a3682e",
      "parents": [
        "316af76f3475bb73dbb11f1c6d549ae589efb3d0"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Fri Jun 20 11:50:29 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Jun 27 09:09:15 2008 -0400"
      },
      "message": "ssb, b43, b43legacy, b44: Rewrite SSB DMA API\n\nThis is a rewrite of the DMA API for SSB devices.\nThis is needed, because the old (non-existing) \"API\" made too many bad\nassumptions on the API of the host-bus (PCI).\nThis introduces an almost complete SSB-DMA-API that maps to the lowlevel\nbus-API based on the bustype.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "585c5434f0e02ff0ffc567ec223af61e2d8e2e88",
      "tree": "9195f60f4f097a92fa9f41c82a2e89342678a06b",
      "parents": [
        "be038b376465953c358d675cb38a611898a49dc2"
      ],
      "author": {
        "name": "Adrian Bunk",
        "email": "bunk@kernel.org",
        "time": "Thu Jun 05 21:29:49 2008 +0300"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Mon Jun 09 15:53:37 2008 -0400"
      },
      "message": "include/linux/ssb/ssb_driver_gige.h typo fix\n\nThis patch fixes a typo in the name of a config variable.\n\nReported-by: Robert P. J. Day \u003crpjday@crashcourse.ca\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@kernel.org\u003e\nReviewed-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "1e42198609d73ed1a9adcba2af275c24c2678420",
      "tree": "32fd4d9073bfc0f3909af8f9fb4bcff38951d01a",
      "parents": [
        "794eb6bf20ebf992c040ea831cd3a9c64b0c1f7a",
        "4b119e21d0c66c22e8ca03df05d9de623d0eb50f"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Thu Apr 17 23:56:30 2008 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Thu Apr 17 23:56:30 2008 -0700"
      },
      "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6\n"
    },
    {
      "commit": "4ac58469f13028e1eb97f8bc7b0fca5072591d8d",
      "tree": "c955e1b753e1f86c570d2d6f5f6095d1182d5c35",
      "parents": [
        "2d4543fdb487b1301ae48703dea3e66ead2d3c75"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Fri Apr 11 11:59:00 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Apr 15 15:04:35 2008 -0400"
      },
      "message": "ssb: Fix usage of struct device used for DMAing\n\nThis fixes DMA on architectures where DMA is nontrivial, like PPC64.\nWe must use the host-device\u0027s (PCI) struct device for any DMA\noperation instead of the SSB device. For this we add a new\nstruct device pointer to the SSB device structure that will always\npoint to the right device for DMAing.\n\nWithout this patch b43 and b44 drivers won\u0027t work on complex-DMA\narchitectures, that for example need dev-\u003earchdata for DMA operations.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "d625a29ba649a4df6027520ffc378f23c0e6883e",
      "tree": "07b895d38717e24e655948c963f4287f551df42f",
      "parents": [
        "93af2614513103216038afa708718295e7016dbb"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Wed Apr 02 19:46:56 2008 +0200"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Apr 08 16:44:40 2008 -0400"
      },
      "message": "ssb: Add support for block-I/O\n\nThis adds support for block based I/O to SSB.\nThis is needed in order to efficiently support PIO data\ntransfers to the card.\nThe block-I/O support is only compiled, if it\u0027s selected by the\nweird driver that needs it. So there\u0027s no overhead for sane devices.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "8fe2b65a18e49bfde56a59ed4ab3fc7aa0c2f325",
      "tree": "a813fe635b7a8c248c586de847d1501c4ccaab6b",
      "parents": [
        "5100d5ac81b9330dc57e35adbe50923ba6107b8f"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Sun Mar 30 00:10:50 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Apr 08 15:05:57 2008 -0400"
      },
      "message": "ssb: Turn suspend/resume upside down\n\nTurn the SSB bus suspend mechanism upside down.\nInstead of deciding by an internal reference count when to suspend/resume,\nlet the parent bus call us in their suspend/resume routine.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "e7ec2e3230633a858af1b0b359f6c4670dbeb997",
      "tree": "c43dbd7f6cab0ac066c039697528312d802617ef",
      "parents": [
        "068edceb7e73c05f77e204442ea8f86e238575da"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Mon Mar 10 17:26:32 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Mar 13 19:32:32 2008 -0400"
      },
      "message": "ssb: Add SPROM/invariants support for PCMCIA devices\n\nThis adds support for reading/writing the SPROM invariants\nfor PCMCIA based devices.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "aab547ce0d1493d400b6468c521a0137cd8c1edf",
      "tree": "84625da40d905669a28a5770de111225667d5f27",
      "parents": [
        "69d3b6f491545d326135a1def4e290cd577c9a36"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Fri Feb 29 11:36:12 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Thu Mar 06 17:09:43 2008 -0500"
      },
      "message": "ssb: Add Gigabit Ethernet driver\n\nThis adds the Gigabit Ethernet driver for the SSB\nGigabit Ethernet core. This driver actually is a frontend to\nthe Tigon3 driver. So the real work is done by tg3.\nThis device is used in the Linksys WRT350N.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "28de57d1a9eb7e67badb731297197fcbef0cc19e",
      "tree": "950fe43f059f03659c4fd87755a73610af5b20c4",
      "parents": [
        "fba4a1e63723b5ef16c21a90f06520ae37c5da98"
      ],
      "author": {
        "name": "Aurelien Jarno",
        "email": "aurelien@aurel32.net",
        "time": "Fri Feb 22 16:14:58 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 29 15:41:43 2008 -0500"
      },
      "message": "ssb: Add CHIPCO IRQ access functions\n\nThis patch adds functions to setup and read the CHIPCO IRQ.\n\nSigned-off-by: Aurelien Jarno \u003caurelien@aurel32.net\u003e\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "ffc7689ddae5cbe12bde437ae0f2b386d568b5cd",
      "tree": "638e7dcf083c88cf45763953aa244504d357a220",
      "parents": [
        "004c872e78d433f84f0a5cd4db7a6c780c0946e1"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Wed Feb 20 19:08:10 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Fri Feb 29 15:37:26 2008 -0500"
      },
      "message": "ssb: Add support for 8bit register access\n\nThis adds support for 8bit wide register reads/writes.\nThis is needed in order to support the gigabit ethernet core.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "7cb4461520f307a6e3fb2bb32cb8daee45aa1fae",
      "tree": "24d287cb729e511285465456cdd0ec02805e9130",
      "parents": [
        "53521d8c90d366191b6c134f88a8ebe83de60614"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Tue Feb 19 17:46:48 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Feb 20 20:11:49 2008 -0500"
      },
      "message": "ssb: Fix pcicore cardbus mode\n\nThis fixes the pcicore driver to not die a horrible\ncrash death when inserting a cardbus card.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "53521d8c90d366191b6c134f88a8ebe83de60614",
      "tree": "2d4b8bed0db743927586389ab035aab816d22f36",
      "parents": [
        "c2bcbe65fc88d61f9a806367ff6eab76c9eabb3a"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Tue Feb 19 16:22:50 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Feb 20 20:11:49 2008 -0500"
      },
      "message": "ssb: Make the GPIO API reentrancy safe\n\nThis fixes the GPIO API to be reentrancy safe.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "c2bcbe65fc88d61f9a806367ff6eab76c9eabb3a",
      "tree": "c882d3016ed4a273b8e7e8fb9b86c1bcb6d6836a",
      "parents": [
        "42bfad4f71637c4eb4791aa8062063c4a8526522"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Tue Feb 19 14:53:35 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Feb 20 20:11:49 2008 -0500"
      },
      "message": "ssb: Fix the GPIO API\n\nThis fixes the GPIO API to be usable.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "42bfad4f71637c4eb4791aa8062063c4a8526522",
      "tree": "42c8c52d953aaa8f0418084af1e60c15e900488c",
      "parents": [
        "58ff70d4feae29cbb7ace410fa6585ef3afb44b6"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Tue Feb 19 12:41:30 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Feb 20 20:11:49 2008 -0500"
      },
      "message": "ssb: Fix watchdog access for devices without a chipcommon\n\nThis fixes the SSB watchdog access for devices without a chipcommon.\nThese devices have the watchdog on the extif.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "58ff70d4feae29cbb7ace410fa6585ef3afb44b6",
      "tree": "298ddfd64df8fbab670538202f93cf0bc028605a",
      "parents": [
        "04f93a87a2db84e7214a4ec56fccd2289e973ce5"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Mon Feb 18 21:44:39 2008 +0100"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Wed Feb 20 20:11:48 2008 -0500"
      },
      "message": "ssb: Fix serial console on new bcm47xx devices\n\nThis fixes the baud settings for new devices\nlike the Linksys WRT350n.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "532031d7f426eb02f854d13184416cabcb01bdd5",
      "tree": "6b48ce4b8a037c7aa0d6972d77718442db253f26",
      "parents": [
        "03ac7a8141e1613add92d42e389a35a126b1caf8"
      ],
      "author": {
        "name": "Andrew Morton",
        "email": "akpm@linux-foundation.org",
        "time": "Mon Feb 04 23:58:42 2008 -0800"
      },
      "committer": {
        "name": "John W. Linville",
        "email": "linville@tuxdriver.com",
        "time": "Tue Feb 05 14:35:47 2008 -0500"
      },
      "message": "b43: fix build with CONFIG_SSB_PCIHOST\u003dn\n\nm68k allmodconfig gives\n\ndrivers/net/wireless/b43/main.c:251: error: implicit declaration of function \u0027mmiowb\u0027\n\nbecause CONFIG_B43\u003dm, CONFIG_SSB_PCIHOST\u003dn.\n\nMight be Kconfig bustage, but this works...\n\nCc: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "af4b7450788426a113057ce2d85c25b4f4e440d1",
      "tree": "2e5f20f1a4917cc35d188986f3cdabbcdb0bbd69",
      "parents": [
        "60168f12b9d3fa1a81c774ecaffe8620a862323d"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Sun Jan 13 21:08:24 2008 +0100"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Jan 28 15:09:52 2008 -0800"
      },
      "message": "ssb: Add boardflags_hi field to the sprom data structure\n\nAdd boardflags-high.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "961d57c883198831503c7be5c088a26101dfb16c",
      "tree": "73904fd7e7caa9185859b2332a014eb68b5a0825",
      "parents": [
        "aa6c7ae21d079f25420e436092e5461001ec29d7"
      ],
      "author": {
        "name": "Miguel Botón",
        "email": "mboton.lkml@gmail.com",
        "time": "Tue Jan 01 01:16:46 2008 +0100"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Jan 28 15:09:18 2008 -0800"
      },
      "message": "ssb: add \u0027ssb_pcihost_set_power_state\u0027 function\n\nThis patch adds the \u0027ssb_pcihost_set_power_state\u0027 function.\n\nThis function allows us to set the power state of a PCI device\n(for example b44 ethernet device).\n\nSigned-off-by: Miguel Botón \u003cmboton@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "993e1c780b323736a2cdc24564f35e80ce8d3337",
      "tree": "6dd8e11093bc3820351fd83bebfecc6f0ae33fa6",
      "parents": [
        "f3dd3fcc2c79b950801641075b33b86acc372d9b"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Sat Dec 22 22:01:36 2007 +0100"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Jan 28 15:09:16 2008 -0800"
      },
      "message": "ssb: Fix PCMCIA lowlevel register access\n\nThis fixes lowlevel register access for PCMCIA based devices.\n\nThe patch also adds a temporary workaround for the device mac address.\nIt simply adds generation of a random address. The real SPROM extraction\nwill follow in another patch.\nThe temporary workaround will be removed then, but for now it\u0027s OK.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "e861b98d5e1be769ca6483b6df97149b956ea834",
      "tree": "88754e03eddc9a7b1441421125a776c5cbd597d1",
      "parents": [
        "66c6b139f77e8568f03611422967bfaa4c4a3bbd"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Sat Dec 22 21:51:30 2007 +0100"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Jan 28 15:09:14 2008 -0800"
      },
      "message": "ssb: Fix extraction of values from SPROM\n\nThis fixes extraction of some values from the SPROM.\nIt mainly fixes extraction of antenna related values, which\nis needed for another b43 fix sent later.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "d3c319f9c8d9ee2c042c60b8a1bbd909dcc42782",
      "tree": "a80dc345690edae76d7eea864ec25966869b08b3",
      "parents": [
        "7797aa384870e3bb5bfd3b6a0eae61e7c7a4c993"
      ],
      "author": {
        "name": "Larry Finger",
        "email": "Larry.Finger@lwfinger.net",
        "time": "Fri Nov 09 16:58:20 2007 -0600"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Jan 28 15:04:44 2008 -0800"
      },
      "message": "ssb: Remove the old, now unused, data structures\n\nThe old, now unused, data structures and SPROM extraction routines\nare removed.\n\nSigned-off-by: Larry Finger\u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "c272ef4403c271799a7f09a4ab7a236c86643843",
      "tree": "8f2baf9c11159044b42233cea56aa5a62dcd7500",
      "parents": [
        "ac82fab44f6b981e3f6b53784e2f23838f4908e1"
      ],
      "author": {
        "name": "Larry Finger",
        "email": "Larry.Finger@lwfinger.net",
        "time": "Fri Nov 09 16:56:25 2007 -0600"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Jan 28 15:04:41 2008 -0800"
      },
      "message": "ssb: Convert to use of the new SPROM structure\n\nIn disagreement with the SPROM specs, revision 3 devices appear to have\nmoved the MAC address.\n\nChange ssb to handle the revision 4 SPROM, which is a different size.\nThis change in size is handled by adding a new variable to the ssb_sprom\nstruct and using it whenever possible. For those routines that do not\nhave access to this structure, a \u0027u16 size\u0027 argument is added.\n\nThe new PCI_ID for the BCM4328 is also added.\n\nTesting of the Revision 4 SPROM, which is used on the BCM4328, was done\nby Michael Gerdau \u003cmgerdau@tiscali.de\u003e.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "ac82fab44f6b981e3f6b53784e2f23838f4908e1",
      "tree": "bc1f0ccb118aff495ee2b9448e8fd51b92958298",
      "parents": [
        "3957ccb56e17ca839265ccb292c4c6850dcf5d32"
      ],
      "author": {
        "name": "Larry Finger",
        "email": "Larry.Finger@lwfinger.net",
        "time": "Fri Nov 09 16:54:45 2007 -0600"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Mon Jan 28 15:04:40 2008 -0800"
      },
      "message": "ssb: Add new SPROM structure while keeping the old\n\nThe SPROM\u0027s for various devices utilizing the Sonics Silicon Backplane come\nwith various revisions. The Revision 2 SPROM inherited the data layout of 1, and\nRevision 3 inherited the layout of 2. The first instance of Revision 4 has\nnow been found in a BCM4328 wireless LAN card. This device does not inherit any\nlayout from previous versions. Although it was possible to create a data\nstructure that kept all the old layouts, we decided to start fresh, keep only\nthose SPROM variables that are used by the drivers that utilize ssb, and to\ndo the conversion in such a manner that neither compilation or execution will\nbe affected if a bisection lands in the middle of these changes, while keeping\nthe patches as small as possible.\n\nIn this patch, the sprom structures are changed while maintaining the old ones.\n\nSigned-off-by: Larry Finger \u003cLarry.Finger@lwfinger.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n"
    },
    {
      "commit": "61e115a56d1aafd6e6a8a9fee8ac099a6128ac7b",
      "tree": "add97bf6a1207a4caea3a86cf13495ad3dc477de",
      "parents": [
        "5ee3afba88f5a79d0bff07ddd87af45919259f91"
      ],
      "author": {
        "name": "Michael Buesch",
        "email": "mb@bu3sch.de",
        "time": "Tue Sep 18 15:12:50 2007 -0400"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Wed Oct 10 16:51:36 2007 -0700"
      },
      "message": "[SSB]: add Sonics Silicon Backplane bus support\n\nSSB is an SoC bus used in a number of embedded devices.  The most\nwell-known of these devices is probably the Linksys WRT54G, but there\nare others as well.  The bus is also used internally on the BCM43xx\nand BCM44xx devices from Broadcom.\n\nThis patch also includes support for SSB ID tables in modules, so\nthat SSB drivers can be loaded automatically.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    }
  ]
}