)]}' { "log": [ { "commit": "49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb", "tree": "f61c34da6092f2f1a97a78da567afc59ad40850b", "parents": [ "75b1d97535327d0428c6bffd9d5407e65546fd5d" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:58 2007 +0200" }, "message": "ide: add short cables support\n\nThis patch allows users to override both host and device side cable detection\nwith \"ideX\u003data66\" kernel parameter. Thanks to this it should be now possible\nto use UDMA \u003e 2 modes on systems (laptops mainly) which use short 40-pin cable\ninstead of 80-pin one.\n\nNext patches add automatic detection of some systems using short cables.\n\nChanges:\n\n* Rename hwif-\u003eudma_four to hwif-\u003ecbl and make it u8.\n\n* Convert all existing users accordingly (use ATA_CBL_* defines while at it). \n\n* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().\n\n* Use ATA_CBL_PATA40_SHORT for \"ideX\u003data66\" kernel parameter.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\n" }, { "commit": "f9383c4269d264c3cf563bd2de365891f6592ebd", "tree": "7f1f3525c51237dc5806d17dd2c68c19d47a493b", "parents": [ "1b9da32a2855afa3c5f27690e03a33dc97410c42" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:56 2007 +0200" }, "message": "ide: use mutex instead of ide_setting_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n--\n\n" }, { "commit": "ef29888ea8e1fdc499e995260195b66fc91d2728", "tree": "aa042c07a63de5bf4147ab819f89724ad9838877", "parents": [ "c283f5dbe31920ca70b80a594a97bfaa2a28be13" ], "author": { "name": "Matthias Kaehlcke", "email": "matthias.kaehlcke@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:55 2007 +0200" }, "message": "ide: use mutex instead of ide_cfg_sem semaphore in IDE driver\n\nThe IDE driver uses a semaphore as mutex.\nUse the mutex API instead of the (binary) semaphore.\n\nSigned-off-by: Matthias Kaehlcke \u003cmatthias.kaehlcke@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c283f5dbe31920ca70b80a594a97bfaa2a28be13", "tree": "891268bfec27d88bb9c5773026dcf950afe063d9", "parents": [ "841d2a9bf16471716ba3a5172d24aa40a2ea9398" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "message": "ide: make void and rename ide_dma_timeout() method\n\nSince ide_dma_timeout() method\u0027s result is discarded, make it return \u0027void\u0027.\nWhile at it, drop \u0027ide_\u0027 from the method\u0027s name, drop the \u0027__\u0027 prefix from\nthe default method\u0027s name, and do some cleanups in this method driver-wise:\n\n- in ide-dma.c, au1xxx-ide.c, and pdc202xx_old.c, define/use \u0027hwif\u0027 variable;\n\n- in au1xxx-ide.c, get rid of commented out printk();\n\n- in sl82c105.c, get rid of unnecessary variables.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "841d2a9bf16471716ba3a5172d24aa40a2ea9398", "tree": "f836d41ed70bf3efd6350c293c0c31a40ef4f900", "parents": [ "b740d8846e2e184909e9f74d4ad9d67ae0e084ea" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Jul 09 23:17:54 2007 +0200" }, "message": "ide: make void and rename ide_dma_lostirq() method\n\nSince ide_dma_lostirq() method\u0027s result is discarded, make it return \u0027void\u0027.\nWhile at it, rename the method to dma_lost_irq(), drop the \u0027__\u0027 prefix from the\ndefault method\u0027s name, and do some cleanups in this method driver-wise:\n\n- in aec62xx.c, rename the method in accordance with other drivers, and get rid\n of unnecessary variables there;\n\n- in pdc202xx_old.c, define/use \u0027hwif\u0027 variable;\n\n- in sgiioc4.c, rearrange the code to call the resetproc() method directly.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "0d2157f78d17fcee17791f54959e67cc0af0da74", "tree": "22782319df55322375f5fe3b8c23d1591e3fbcf0", "parents": [ "0380dad45e4f5a606025cc4df2a2cd26af08796b" ], "author": { "name": "Lee Trager", "email": "lt73@cs.drexel.edu", "time": "Fri Jun 08 15:14:30 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Jun 08 15:14:30 2007 +0200" }, "message": "ide: HPA detect from resume\n\nCurrently when system which have HPA require HPA to be detected and\ndisabled upon resume from RAM or disk. The current IDE drivers do not do\nthis nor does libata (obviously it since it doesn\u0027t support HPA yet).\n\nI have implemented this into the current IDE drivers and it has been\ntested by many others since 7/15/2006 in bug number 6840:\n\n\thttp://bugzilla.kernel.org/show_bug.cgi?id\u003d6840\n\nand it has been confirmed to work fine with no problems.\n\nbart: added drv !\u003d NULL check to generic_ide_suspend()\n\nFrom: Lee Trager \u003clt73@cs.drexel.edu\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "122ab0887c36247bd4508c25e4fccf9264546fe2", "tree": "ae8645bf5fb8ce6dbbafda5789f91fa002f335b3", "parents": [ "3649c06e66ad3589374e8765ed69eda65658735c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:46 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:46 2007 +0200" }, "message": "ide: remove ide_use_dma()\n\nide_use_dma() duplicates a lot of ide_max_dma_mode() functionality\nand as all users of ide_use_dma() were converted to use ide_tune_dma()\nnow it is possible to add missing checks to ide_tune_dma() and remove\nide_use_dma() completely, so do it.\n\nThere should be no functionality changes caused by this patch.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "4728d546d7137ad5350cc2e53d4748fd26f61a60", "tree": "73cd688f1f16b1d04a23958e7110ba3f70def531", "parents": [ "46cedc9b773795b6190c31e5d32de5207b55a356" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:46 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:46 2007 +0200" }, "message": "ide: remove ide_dma_enable()\n\n* check -\u003espeedproc return value in ide_tune_dma()\n* use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers\n* remove no longer needed ide_dma_enable()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "6d208b39c45edee5def6c201fcd51561c5a39828", "tree": "55645d2b6173e3161d12e5c9efdc4bd052b75b56", "parents": [ "5cbf79cdb37be2aa2a1b4fa94144526b14557060" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: legacy PCI bus order probing fixes\n\nIDE PCI host drivers should register themselves with IDE core only when\nIDE driver is built-in, otherwise (IDE driver is modular and thus IDE PCI\nhost drivers are also modular) the code has no effect and just complicates\nthe probing.\n\nFix it by adding new config option CONFIG_IDEPCI_PCIBUS (defined only when\nneeded and invisible to the user) and covering by #ifdef/#endif the code\nin question. It turned out that \"ide\u003dreverse\" was silently accepted but did\nnothing in case when IDE driver was modular, this is fixed now.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "5cbf79cdb37be2aa2a1b4fa94144526b14557060", "tree": "1fcfbc1248b9904e5890cc593f018ee0a8a53238", "parents": [ "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:11 2007 +0200" }, "message": "ide: add ide_proc_register_port()\n\n* create_proc_ide_interfaces() tries to add /proc entries for every probed\n and initialized IDE port, replace it by ide_proc_register_port() which does\n it only for the given port (also rename destroy_proc_ide_interface() to\n ide_proc_unregister_port() for consistency)\n \n* convert {create,destroy}_proc_ide_interface[s]() users to use new functions\n\n* pmac driver depended on proc_ide_create() to add /proc port entries, fix it\n \n* au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic\n driver (CONFIG_IDE_GENERIC\u003dy) to add port /proc entries, fix them\n\n* there is now no need to add /proc entries for IDE ports in proc_ide_create()\n so don\u0027t do it\n\n* proc_ide_create() needs now to be called before drivers are probed - fix it,\n while at it make proc_ide_create() create /proc \"ide\" directory\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "869c56ee9de1b72cd3f8ab9cdfbd3601e55c61f2", "tree": "0f295ba89c774f9a20b2b089a29f288cd80b8094", "parents": [ "7f8f48af0861c38c28d4abd550102643e0ea9e6a" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: add \"initializing\" argument to ide_register_hw()\n\nAdd \"initializing\" argument to ide_register_hw() and use it instead of ide.c\nwide variable of the same name. Update all users of ide_register_hw()\naccordingly.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7f8f48af0861c38c28d4abd550102643e0ea9e6a", "tree": "6ec47ace87afbd96cc1144d423854b09d9f21d75", "parents": [ "7662d046df09e80680b77b68de896beab45e675e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: cable detection fixes (take 2)\n\nTejun\u0027s recent eighty_ninty_three() fix has inspired me to do more thorough\nreview of the cable detection code...\n\n* print user-friendly warning about limiting the maximum transfer speed\n to UDMA33 (and the reason behind it) when 80-wire cable is not detected,\n also while at it cleanup eighty_ninty_three() a bit\n\n* use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs:\n - bit 14 (word 93 validity check) \u003d\u003d 1 \u0026\u0026 bit 13 (80-wire cable test) \u003d\u003d 1\n were used as 80-wire cable present test for CONFIG_IDEDMA_IVB\u003dn case\n (please see FIXME comment in eighty_ninty_three() for more details)\n - CONFIG_IDEDMA_IVB\u003dy/n cases were interchanged\n - check for SATA devices was missing\n\n* remove private cable warnings from pdc_202xx{old,new} drivers now that core\n code provides this functionality (plus, in pdc202xx_new case the test could\n give false warnings for ATAPI devices because pdc202xx_new driver doesn\u0027t\n even support ATAPI DMA)\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7662d046df09e80680b77b68de896beab45e675e", "tree": "ea2281c59399b3867fb37e1005a0f0e0d2170c5d", "parents": [ "1497943ee692aa7519fa972d0e3a339649bf3a96" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: move IDE settings handling to ide-proc.c\n\n* move\n\t__ide_add_setting()\n\tide_add_setting()\n\t__ide_remove_setting()\n\tauto_remove_settings()\n\tide_find_setting_by_name()\n\tide_read_setting()\n\tide_write_setting()\n\tset_xfer_rate()\n\tide_add_generic_settings()\n\tide_register_subdriver()\n\tide_unregister_subdriver()\n\n from ide.c to ide-proc.c\n\n* set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it\n\n* rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(),\n update device drivers to use new names\n\n* add CONFIG_IDE_PROC_FS\u003dn versions of ide_proc_[un]register_driver()\n and ide_add_generic_settings()\n\n* make ide_find_setting_by_name(), ide_{read,write}_setting()\n and ide_{add,remove}_proc_entries() static\n\n* cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef,\n also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc\n\n* remove bogus comment from ide.h\n\n* cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t\n\nBesides saner code this patch results in the IDE core smaller by ~2 kB\n(on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS\u003dn.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "1497943ee692aa7519fa972d0e3a339649bf3a96", "tree": "dc70ee9731f66dd323ddb397380b62c0c2977add", "parents": [ "ecfd80e4a514123070b4cfb674b817ba75055df2" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: split off ioctl handling from IDE settings (v2)\n\n* do write permission and min/max checks in ide_procset_t functions\n\n* ide-disk.c: drive-\u003eid is always available so cleanup \"multcount\" setting\n accordingly\n\n* ide-disk.c: \"address\" setting was incorrectly defined as type TYPE_INTA,\n fix it by using type TYPE_BYTE and updating ide_drive_t-\u003eadressing field,\n the bug didn\u0027t trigger because this IDE setting uses custom -\u003eset function\n\n* ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl\n\n* ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl\n\n* handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl()\n instead of using IDE settings to deal with them\n\n* remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl\n fields from ide_settings_t, also remove now unused TYPE_INTA handling\n\nv2:\n* add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ecfd80e4a514123070b4cfb674b817ba75055df2", "tree": "956baa39e22030d139803b7585bd71e91c637bb5", "parents": [ "29e744d088e3555f4efbdf390f01088dd66993b6" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "message": "ide: make /proc/ide/ optional\n\nAll important information/features should be already available through\nsysfs and ioctl interfaces.\n\nAdd CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option,\ndisabling it makes IDE driver ~5 kB smaller (on x86-32).\n\nWhile at it add CONFIG_PROC_FS\u003dn versions of proc_ide_{create,destroy}()\nand remove no longer needed #ifdefs.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "29e744d088e3555f4efbdf390f01088dd66993b6", "tree": "2747692efcef505872d29e0b62cb2345b0d64978", "parents": [ "2d5eaa6dd744a641e75503232a01f52d0768884c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:09 2007 +0200" }, "message": "ide: add ide_tune_dma() helper\n\nAfter reworking the code responsible for selecting the best DMA\ntransfer mode it is now possible to add generic ide_tune_dma() helper.\n\nConvert some IDE PCI host drivers to use it (the ones left need more work).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2d5eaa6dd744a641e75503232a01f52d0768884c", "tree": "0736bd00ea3bd032d601d0a676c998cb043b877a", "parents": [ "18137207236285989dfc0ee7f929b954199228f3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "message": "ide: rework the code for selecting the best DMA transfer mode (v3)\n\nDepends on the \"ide: fix UDMA/MWDMA/SWDMA masks\" patch.\n\n* add ide_hwif_t.udma_filter hook for filtering UDMA mask\n (use it in alim15x3, hpt366, siimage and serverworks drivers)\n* add ide_max_dma_mode() for finding best DMA mode for the device\n (loosely based on some older libata-core.c code)\n* convert ide_dma_speed() users to use ide_max_dma_mode()\n* make ide_rate_filter() take \"ide_drive_t *drive\" as an argument instead\n of \"u8 mode\" and teach it to how to use UDMA mask to do filtering\n* use ide_rate_filter() in hpt366 driver\n* remove no longer needed ide_dma_speed() and *_ratemask()\n* unexport eighty_ninty_three()\n\nv2:\n* rename -\u003efilter_udma_mask to -\u003eudma_filter\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space\n originated transfer mode change requests when 100MHz clock is used)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "18137207236285989dfc0ee7f929b954199228f3", "tree": "d55f1287ae64318190e18cb7a64ca514c76c3414", "parents": [ "de372ecd80a42c4fb485c7232475301a18d05184" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:07 2007 +0200" }, "message": "ide: fix UDMA/MWDMA/SWDMA masks (v3)\n\n* use 0x00 instead of 0x80 to disable -\u003e{ultra,mwdma,swdma}_mask\n* add udma_mask field to ide_pci_device_t and use it to initialize\n -\u003eultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers\n* fix UDMA masks to match with chipset specific *_ratemask()\n (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask\n filtering method - done in the next patch)\n\nv2:\n* piix: fix cable detection for 82801AA_1 and 82372FB_1\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* cmd64x: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n* aec62xx: fix newly introduced bug - check DMA status not command register\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* piix: use hwif-\u003ecds-\u003eudma_mask\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "e93df705af1992dbf5956a8c80fcb9987bc595c0", "tree": "62ceef1f46ecde9782d7ee3f26f0a0e108418b69", "parents": [ "62ea6d80211ecc88ef516927ecebf64cb505be3f" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Sat May 05 22:03:49 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat May 05 22:03:49 2007 +0200" }, "message": "sl82c105: rework PIO support (take 2)\n\nGet rid of the \u0027pio_speed\u0027 member of \u0027ide_drive_t\u0027 that was only used by this\ndriver by storing the PIO mode timings in the \u0027drive_data\u0027 instead -- this\nallows us to greatly simplify the process of \"reloading\" of the chip\u0027s timing\nregister and do it right in sl82c150_dma_off_quietly() and to get rid of two\nextra arguments to config_for_pio() -- which got renamed to sl82c105_tune_pio()\nand now returns a PIO mode selected, with ide_config_drive_speed() call moved\ninto the tuneproc() method, now called sl82c105_tune_drive() with the code to\nset drive\u0027s \u0027io_32bit\u0027 and \u0027unmask\u0027 flags in its turn moved to its proper place\nin the init_hwif() method.\nAlso, while at it, rename get_timing_sl82c105() into get_pio_timings() and get\nrid of the code in it clamping cycle counts to 32 which was both incorrect and\nnever executed anyway...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "23450319e2890986c247ec0aa1442f060e657e6d", "tree": "c30fc173d8b97343f8ae7b1b1ed511366af256ab", "parents": [ "90f30eccf41302a2542f5d374af243061902bd98" ], "author": { "name": "Suleiman Souhlal", "email": "suleiman@google.com", "time": "Tue Apr 10 22:38:37 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Tue Apr 10 22:38:37 2007 +0200" }, "message": "ide: correctly prevent IDE timer expiry function to run if request was already handled\n\nIt is possible for the timer expiry function to run even though the\nrequest has already been handled: ide_timer_expiry() only checks that\nthe handler is not NULL, but it is possible that we have handled a\nrequest (thus clearing the handler) and then started a new request\n(thus starting the timer again, and setting a handler). \n\nA simple way to exhibit this is to set the DMA timeout to 1 jiffy and\nrun dd: The kernel will panic after a few minutes because\nide_timer_expiry() tries to add a timer when it\u0027s already active.\n\nTo fix this, we simply add a request generation count that gets\nincremented at every interrupt, and check in ide_timer_expiry() that\nwe have not already handled a new interrupt before running the expiry\nfunction.\n\nSigned-off-by: Suleiman Souhlal \u003csuleiman@google.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "513daadd152ddbf32cb6d0447ddba3427ce5b8e8", "tree": "994549525a3830b496af552dee1fd73227f36373", "parents": [ "362ebd83adb4ff2761b6f49a3570f501c3c7e467" ], "author": { "name": "Suleiman Souhlal", "email": "suleiman@google.com", "time": "Mon Mar 26 23:03:20 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Mon Mar 26 23:03:20 2007 +0200" }, "message": "ide: use correct IDE error recovery\n\nIDE error recovery is using IDLE IMMEDIATE if the drive is busy or has DRQ set.\nThis violates the ATA spec (can only send IDLE IMMEDIATE when drive is not\nbusy) and really hoses up some drives (modern drives will not be able to\nrecover using this error handling). The correct thing to do is issue a SRST\nfollowed by a SET FEATURES command. This is what Western Digital recommends\nfor error recovery and what Western Digital says Windows does.  It also does\nnot violate the ATA spec as far as I can tell.\n\nBart:\n* port the patch over the current tree\n* undo the recalibration code removal\n* send SET FEATURES command after checking for good drive status\n* don\u0027t check whether the current request is of REQ_TYPE_ATA_{CMD,TASK}\n type because we need to send SET FEATURES before handling any requests\n* some pre-ATA4 drives require INITIALIZE DEVICE PARAMETERS command before\n other commands (except IDENTIFY) so send SET FEATURES only if there are\n no pending drive-\u003especial requests\n* update comments and patch description\n* any bugs introduced by this patch are mine and not Suleiman\u0027s :-)\n\nSigned-off-by: Suleiman Souhlal \u003csuleiman@google.com\u003e\nAcked-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "81d368e0e2591497106b2543918c79dd6d78277b", "tree": "7c0977499403ca7cc21ae70760399642abef9e2d", "parents": [ "07af427606667c304a2e965cd51d2c03642e8cae" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Sat Mar 03 17:48:53 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:53 2007 +0100" }, "message": "ide: ide_get_best_pio_mode() returns incorrect IORDY setting (take 2)\n\nThe function ide_get_best_pio_mode() fails to return the correct IORDY setting\nfor the explicitly specified modes -- fix this along with the heading comment,\nand also remove the long commented out code.\n\nAlso, while at it, correct the misliading comment about the PIO cycle time in\n\u003clinux/ide.h\u003e -- it actually consists of only the active and recovery periods,\nwith only some chips also including the address setup time into equation...\n\n[ bart: sl82c105 seems to be currently the only driver affected by this fix ]\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "ccf352894ceef79d40d015e1deee4c46c3aa42ed", "tree": "e30b2b8a4c30e2ef1719ce9780322e671ebe3c43", "parents": [ "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_host_on void (v2)\n\n* since ide_hwif_t.ide_dma_host_on is called either when drive-\u003eusing_dma \u003d\u003d 1\n or when return value is discarded make it void, also drop \"ide_\" prefix\n* make __ide_dma_host_on() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_on() to atiixp_dma_host_on()\n and sgiioc4_ide_dma_host_on() to sgiioc4_dma_host_on().\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7469aaf6a30f4187ed6de7c0aed5c2dd2d1c2d31", "tree": "079930f23b3d14e4ad29ab972bc6d91fde52e5f0", "parents": [ "3608b5d71a52c053787dbad6af20c25f7e0b75a9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)\n\n* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return \u00270\u0027\n make these functions void and while at it drop \"ide_\" prefix\n* fix comment for __ide_dma_off_quietly()\n* make __ide_dma_{host_off,off_quietly,off}() void and drop \"__\" prefix\n\nv2:\n* while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(),\n sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}()\n and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly()\n [ Noticed by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "3608b5d71a52c053787dbad6af20c25f7e0b75a9", "tree": "5bd6ac777d32d8426e65e3c31cc1587674771e8c", "parents": [ "9ef5791e1be91007951477b8ed1530ac1166a8e7" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:26 2007 +0100" }, "message": "ide: add ide_set_dma() helper (v2)\n\n* add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return\n -1 when DMA needs to be disabled (\u003d\u003d need to call -\u003eide_dma_off_quietly)\n 0 when DMA needs to be enabled (\u003d\u003d need to call -\u003eide_dma_on)\n 1 when DMA setting shouldn\u0027t be changed\n* fix IDE code to use ide_set_dma() instead if using -\u003eide_dma_check directly\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2ad1e558a2305c2b3d5099ee2f4a5929307c20ca", "tree": "79a530648cc26184c3b2e3933c0ebad614329b5b", "parents": [ "0ecdca26e556eae9668ce6de9554757dddb942ef" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: convert ide_hwif_t.mmio into flag (v2)\n\nAll users of -\u003emmio \u003d\u003d 1 are gone so convert -\u003emmio into flag.\n\nNoticed by Alan Cox.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "0ecdca26e556eae9668ce6de9554757dddb942ef", "tree": "21d62c01d0c0d5aeea2524252ed8dec6ca20b6d4", "parents": [ "7569e8dc2213ecc47024ea5edbadc8736487d926" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: use PIO/MMIO operations directly where possible (v2)\n\nThis results in smaller/faster/simpler code and allows future optimizations.\nAlso remove no longer needed ide[_mm]_{inl,outl}() and ide_hwif_t.{INL,OUTL}.\n\nv2:\n* updated for scc_pata\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "7569e8dc2213ecc47024ea5edbadc8736487d926", "tree": "44c47e85b5e87c75972c077da31f198c4f597688", "parents": [ "056a697b7388844a1341e92e277bff8e5bf61ec9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: add ide_use_fast_pio() helper (v3)\n\n* add ide_use_fast_pio() helper for use by host drivers\n\n* add DMA capability and hwif-\u003eautodma checks to ide_use_dma()\n\n - au1xxx-ide/it8213/it821x drivers didn\u0027t check for (id-\u003ecapability \u0026 1)\n\n [ for the IT8211/2 in SMART mode this check shouldn\u0027t be made but since\n in it821x_fixups() we set DMA bit explicitly:\n\n if(strstr(id-\u003emodel, \"Integrated Technology Express\")) {\n /* In raid mode the ident block is slightly buggy\n We need to set the bits so that the IDE layer knows\n LBA28. LBA48 and DMA ar valid */\n id-\u003ecapability |\u003d 3; /* LBA28, DMA */\n\n we are better off using generic helper if we can ]\n\n - ide-cris driver didn\u0027t set -\u003eautodma\n\n [ before the patch hwif-\u003eautodma was only checked in the chipset specific\n hwif-\u003eide_dma_check implementations, for ide-cris it is cris_dma_check()\n function so there no behavior change here ]\n\nv2:\n* updated patch description (thanks to Alan Cox for the feedback)\n\nv3:\n* updated for scc_pata driver\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "c94964a4555eb58be3f45edf2b63a2b3f549ef29", "tree": "a8a0bf41a6c2b675e8f376e870f26724e5870327", "parents": [ "7b77d864af29c193f6cee8338dbda40accb9b27b" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: remove ide_drive_t.usage\n\nThis field is no longer used by the core IDE code so fix ide-{disk,floppy}\ndrivers to keep openers count in the driver specific objects and remove\nit from ide-{cd,scsi,tape} drivers (it was write-only).\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "c1607e1af238b823a2158a18ff6c89144ce38c6c", "tree": "75f51cbc38e306bbdb2f7eb4d1413991e4ee7948", "parents": [ "6679054895f9b1dc676d14637306b297451f1ac0" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: remove write-only ide_hwif_t.no_dsc flag\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "6679054895f9b1dc676d14637306b297451f1ac0", "tree": "cde79b99e193a8508ff5faa33f23e1152fb9bb34", "parents": [ "ac4a306537b97fcae5da96bedcf521f6dfdf9753" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: remove write-only ide_pio_data_t.blacklisted\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "6e6cd4c4388f399dd5726b826f02732c53df3ba5", "tree": "cef13ec3b8b5b03a2d4204079f674e2c4e9c0bc2", "parents": [ "f0dd8712eb8cc5687b4582fbc41cfbcd55bba0d2" ], "author": { "name": "Albert Lee", "email": "albertcc@tw.ibm.com", "time": "Sat Feb 17 02:40:22 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:22 2007 +0100" }, "message": "ide: remove clearing bmdma status from cdrom_decode_status() (rev #4)\n\npatch 2/2:\n Remove clearing bmdma status from cdrom_decode_status() since ATA devices\n might need it as well.\n\n (http://lkml.org/lkml/2006/12/4/201 and http://lkml.org/lkml/2006/11/15/94)\n\nSigned-off-by: Albert Lee \u003calbertcc@tw.ibm.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \"Adam W. Hawks\" \u003cawhawks@us.ibm.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f0dd8712eb8cc5687b4582fbc41cfbcd55bba0d2", "tree": "190bc6cf68e056ae72d895dc2c9074de2c0ed18f", "parents": [ "fdb77da4ca68ae17a39d58c9d5c00479a7e124c0" ], "author": { "name": "Albert Lee", "email": "albertcc@tw.ibm.com", "time": "Sat Feb 17 02:40:21 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:21 2007 +0100" }, "message": "ide: clear bmdma status in ide_intr() for ICHx controllers (revised #4)\n\npatch 1/2 (revised):\n- Fix drive-\u003ewaiting_for_dma to work with CDB-intr devices.\n- Do the dma status clearing in ide_intr() and add a new\n hwif-\u003eide_dma_clear_irq for Intel ICHx controllers.\n\nRevised per Alan, Sergei and Bart\u0027s advice.\n\nPatch against 2.6.20-rc6. Tested ok on my ICH4 and pdc20275 adapters.\nPlease review/apply, thanks.\n\nSigned-off-by: Albert Lee \u003calbertcc@tw.ibm.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \"Adam W. Hawks\" \u003cawhawks@us.ibm.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "905adce4094d64a6691df994e424fbf486301adc", "tree": "c4e3a2fb1465eeb713b3bec5ef4634c28179a14b", "parents": [ "78149df6d565c36675463352d0bfe0000b02b7a7", "1e8f34f7d88c969a06229a786241839d49dd63e3" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 07 19:32:36 2007 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 07 19:32:36 2007 -0800" }, "message": "Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6\n\n* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits)\n ide-acpi support warning fix\n ACPI support for IDE devices\n IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter\n ide: it8213 IDE driver update (version 2)\n ide: add it8213 IDE driver\n tc86c001: add missing __init tag for tc86c001_ide_init()\n tc86c001: mark init_chipset_tc86c001() with __devinit tag\n tc86c001: init_hwif_tc86c001() can be static\n ide: add Toshiba TC86C001 IDE driver (take 2)\n pdc202xx_new: remove check_in_drive_lists abomination\n pdc202xx_new: remove useless code\n slc90e66: carry over fixes from piix driver\n piix: tuneproc() fixes/cleanups\n piix: fix 82371MX enablebits\n hpt366: HPT36x PCI clock detection fix\n hpt366: init code rewrite\n hpt366: clean up DMA timeout handling for HPT370\n hpt366: merge HPT37x speedproc handlers\n hpt366: cache channel\u0027s MCR address\n hpt366: switch to using pci_get_slot\n ...\n" }, { "commit": "725522b5453dd680412f2b6463a988e4fd148757", "tree": "45ebe3c30f974ce2311781db428cd3ba4cb4364c", "parents": [ "fe480a2675ed236af396597d9f05245c7bbd0149" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jan 15 11:50:02 2007 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Wed Feb 07 10:37:12 2007 -0800" }, "message": "PCI: add the sysfs driver name to all modules\n\nThis adds the module name to all PCI drivers, if they are built into the\nkernel or not. It will show up in /sys/modules/MODULE_NAME/drivers/\n\nIt also fixes up the IDE core, which was calling __pci_register_driver()\ndirectly.\n\nCc: Kay Sievers \u003ckay.sievers@suse.de\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n\n" }, { "commit": "e3a59b4d9378522479609042836ae930305a67fe", "tree": "1dd41aefac4d7f370dd3798818c2ca36c654fe7c", "parents": [ "78281c5350029e3fa21758d6db9b45ffc7bf72a1" ], "author": { "name": "Hannes Reinecke", "email": "hare@suse.de", "time": "Wed Feb 07 18:19:37 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Feb 07 18:19:37 2007 +0100" }, "message": "ACPI support for IDE devices\n\nThis patch implements ACPI integration for generic IDE devices.\nThe ACPI spec mandates that some methods are called during suspend and\nresume. And consequently there most modern Laptops cannot resume\nproperly without it.\n\nAccording to the spec, we should call \u0027_GTM\u0027 (Get Timing) upon suspend\nto store the current IDE adapter settings.\nUpon resume we should call \u0027_STM\u0027 (Set Timing) to initialize the\nadapter with the stored settings; afterwards \u0027_GTF\u0027 (Get Taskfile)\nshould be called which returns a buffer with some IDE initialisation\ncommands. Those commands should be passed to the drive.\n\nThere are two module params which control the behaviour of this patch:\n\n\u0027ide\u003dnoacpi\u0027\n\tDo not call any ACPI methods (Disables any ACPI method calls)\n\u0027ide\u003dacpigtf\u0027\n\tEnable execution of _GTF methods upon resume.\n\tHas no effect if \u0027ide\u003dnoacpi\u0027 is set.\n\u0027ide\u003dacpionboot\u0027\n\tEnable execution of ACPI methods during boot.\n\tThis might be required on some machines if \u0027ide\u003dacpigtf\u0027 is\n\tselected as some machines modify the _GTF information\n\tdepending on the drive identification passed down with _STM.\n\nSigned-off-by: Hannes Reinecke \u003chare@suse.de\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2b02a1792000900ead4638f4d42fcdd742062cfa", "tree": "a996a02cd8d028fd53223bd17ae8793185d94702", "parents": [ "4259cb25d436a79bf6b07d8075423573567c211d" ], "author": { "name": "Boaz Harrosh", "email": "bharrosh@panasas.com", "time": "Tue Dec 05 10:19:14 2006 +0100" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Tue Dec 12 10:22:23 2006 +0100" }, "message": "[PATCH] remove blk_queue_activity_fn\n\nWhile working on bidi support at struct request level\nI have found that blk_queue_activity_fn is actually never used.\nThe only user is in ide-probe.c with this code:\n\n\t/* enable led activity for disk drives only */\n\tif (drive-\u003emedia \u003d\u003d ide_disk \u0026\u0026 hwif-\u003eled_act)\n\t\tblk_queue_activity_fn(q, hwif-\u003eled_act, drive);\n\nAnd led_act is never initialized anywhere.\n(Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18)\nUnless it is all for future use off course.\n(this patch is against linux-2.6-block.git as off 2006/12/4)\n\nSigned-off-by: Boaz Harrosh \u003cbharrosh@panasas.com\u003e\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "ee2f344b33b507af23610c8fdfdde38d7c10fb33", "tree": "7908a16d267168a74178aad61e30a82590ca6aac", "parents": [ "33859f7f9788da2ac9aa23be4dc8e948112809ca" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Sun Dec 10 02:20:39 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.osdl.org", "time": "Sun Dec 10 09:57:20 2006 -0800" }, "message": "[PATCH] ide-cd: Handle strange interrupt on the Intel ESB2\n\nThe ESB2 appears to emit spurious DMA interrupts when configured for native\nmode and handling ATAPI devices. Stratus were able to pin this bug down and\nproduce a patch. This is a rework which applies the fixup only to the ESB2\n(for now). We can apply it to other chips later if the same problem is found.\n\nThis code has been tested and confirmed to fix the problem on the tested\nsystems.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\n(Most of the hard work done by Stratus however)\nCc: Jens Axboe \u003caxboe@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "7d12e780e003f93433d49ce78cfedf4b4c52adc5", "tree": "6748550400445c11a306b132009f3001e3525df8", "parents": [ "da482792a6d1a3fbaaa25fae867b343fb4db3246" ], "author": { "name": "David Howells", "email": "dhowells@redhat.com", "time": "Thu Oct 05 14:55:46 2006 +0100" }, "committer": { "name": "David Howells", "email": "dhowells@warthog.cambridge.redhat.com", "time": "Thu Oct 05 15:10:12 2006 +0100" }, "message": "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers\n\nMaintain a per-CPU global \"struct pt_regs *\" variable which can be used instead\nof passing regs around manually through all ~1800 interrupt handlers in the\nLinux kernel.\n\nThe regs pointer is used in few places, but it potentially costs both stack\nspace and code to pass it around. On the FRV arch, removing the regs parameter\nfrom all the genirq function results in a 20% speed up of the IRQ exit path\n(ie: from leaving timer_interrupt() to leaving do_IRQ()).\n\nWhere appropriate, an arch may override the generic storage facility and do\nsomething different with the variable. On FRV, for instance, the address is\nmaintained in GR28 at all times inside the kernel as part of general exception\nhandling.\n\nHaving looked over the code, it appears that the parameter may be handed down\nthrough up to twenty or so layers of functions. Consider a USB character\ndevice attached to a USB hub, attached to a USB controller that posts its\ninterrupts through a cascaded auxiliary interrupt controller. A character\ndevice driver may want to pass regs to the sysrq handler through the input\nlayer which adds another few layers of parameter passing.\n\nI\u0027ve build this code with allyesconfig for x86_64 and i386. I\u0027ve runtested the\nmain part of the code on FRV and i386, though I can\u0027t test most of the drivers.\nI\u0027ve also done partial conversion for powerpc and MIPS - these at least compile\nwith minimal configurations.\n\nThis will affect all archs. Mostly the changes should be relatively easy.\nTake do_IRQ(), store the regs pointer at the beginning, saving the old one:\n\n\tstruct pt_regs *old_regs \u003d set_irq_regs(regs);\n\nAnd put the old one back at the end:\n\n\tset_irq_regs(old_regs);\n\nDon\u0027t pass regs through to generic_handle_irq() or __do_IRQ().\n\nIn timer_interrupt(), this sort of change will be necessary:\n\n\t-\tupdate_process_times(user_mode(regs));\n\t-\tprofile_tick(CPU_PROFILING, regs);\n\t+\tupdate_process_times(user_mode(get_irq_regs()));\n\t+\tprofile_tick(CPU_PROFILING);\n\nI\u0027d like to move update_process_times()\u0027s use of get_irq_regs() into itself,\nexcept that i386, alone of the archs, uses something other than user_mode().\n\nSome notes on the interrupt handling in the drivers:\n\n (*) input_dev() is now gone entirely. The regs pointer is no longer stored in\n the input_dev struct.\n\n (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does\n something different depending on whether it\u0027s been supplied with a regs\n pointer or not.\n\n (*) Various IRQ handler function pointers have been moved to type\n irq_handler_t.\n\nSigned-Off-By: David Howells \u003cdhowells@redhat.com\u003e\n(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)\n" }, { "commit": "913759ac90a727b86da72efcfb70931f497d1cb7", "tree": "f95e10f757e93eca8eacbf03985c09994ec4ef46", "parents": [ "b86cc29dc42203588264d917e88134bdd500b0d7" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Oct 03 01:14:33 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] ide: Fix crash on repeated reset\n\nMichal Miroslaw reported a problem (bugzilla #7023) where a user initiated\nreset while the IDE layer was already resetting the channel caused a crash,\nand provided a rough fix.\n\nThis is a slightly cleaner version of the fix which tracks the reset state\nand blocks further reset requests while a reset is in progress.\n\nNote this is not a security issue - random end users can\u0027t access the\nioctl in question anyway.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Michal Miroslaw \u003cmirq-linux@rere.qmqm.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "3f63c5e88a5ce45b423f3712293f1664115b09c0", "tree": "b735419f00d8054fe16d8aa905d6e46128999050", "parents": [ "27ac6036f31dea8117ecc525e0dbfd17b23e8c09" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Oct 03 01:14:25 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] ide: remove dma_base2 field from ide_hwif_t\n\nRemove dma_base2 field from ide_hwif_t as it\u0027s used only in 2 drivers and\nwithout great need.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: John Keller \u003cjpk@sgi.com\u003e\nSigned-off-by: Jeremy Higdon \u003cjeremy@sgi.com\u003e\nAcked-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "27ac6036f31dea8117ecc525e0dbfd17b23e8c09", "tree": "9b9e2dabb6d6d5b7bd270bb01a3384cad01b049e", "parents": [ "349ae23fe7379a42973bcb1c85f7d43ec583c17d" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Tue Oct 03 01:14:24 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:08 2006 -0700" }, "message": "[PATCH] drivers/ide/: cleanups\n\n- setup-pci.c: remove the unused ide_pci_unregister_driver()\n- ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list)\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nAcked-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "83d7dbc4095a0c314b191c573be5fb4fa6ce0897", "tree": "0da41cd73f0dfdac778e5e415592da92db85db7a", "parents": [ "ce42f19137225d01be9388a73703df40fb7af80f" ], "author": { "name": "Matt Mackall", "email": "mpm@selenic.com", "time": "Tue Oct 03 01:14:16 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:07 2006 -0700" }, "message": "[PATCH] Make number of IDE interfaces configurable\n\nMake IDE_HWIFS configurable if EMBEDDED\n\nThis lets us lop as much as 16k off an x86 build. It\u0027s a little ugly, but\nit\u0027s dead simple. Note the fix for HWIFS \u003c 2.\n\nSizing interfaces dynamically unfortunately turns out to be pretty\nmajor surgery.\n\nadd/remove: 0/1 grow/shrink: 0/11 up/down: 0/-16182 (-16182)\nfunction old new delta\nide_hwifs 16920 1692 -15228\ninit_irq 1113 750 -363\nideprobe_init 283 138 -145\nide_pci_setup_ports 1329 1193 -136\nsave_match 85 - -85\nide_register_hw_with_fixup 367 287 -80\nide_setup 1364 1308 -56\nis_chipset_set 40 4 -36\ncreate_proc_ide_interfaces 225 205 -20\ninit_ide_data 84 67 -17\nide_probe_for_cmd640x 1198 1183 -15\nide_unregister 1452 1451 -1\n\nSigned-off-by: Matt Mackall \u003cmpm@selenic.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nAcked-by: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "020e322de3ff75d32daa58e431aad07071da27c6", "tree": "127509ae4fe684bd557285e246b835fa6a9d5ecd", "parents": [ "bbb3bbdb0f78cb02451daf5687a99627f7ad1140" ], "author": { "name": "Sergei Shtylylov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Oct 03 01:14:13 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:07 2006 -0700" }, "message": "[PATCH] IDE: claim extra DMA ports regardless of channel\n\n- Claim extra DMA I/O ports regardless of what IDE channels are\n present/enabled.\n\n- Remove extra ports handling from ide_mapped_mmio_dma() since it\u0027s not\n applicable to the custom-mapping IDE drivers.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "361934849e9c0418950bedf667732f36337d88b9", "tree": "a2f7d53d3ddf75c19421f972a03a44da00df0396", "parents": [ "64821324ca49f24be1a66f2f432108f96a24e596" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Fri Jul 28 08:54:59 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Fri Jul 28 08:54:59 2006 +0200" }, "message": "[PATCH] ide: option to disable cache flushes for buggy drives\n\nSome drives claim they support cache flushing, but get seriously\nconfused if you try. Add this option to be able to boot with\nbarriers enabled by default.\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "366c7f554e888e51b8395f9b07b273fe775c7ff3", "tree": "324fab660758f1c5be4585ca2fcdb313feb53cef", "parents": [ "0a9da4bd8eb30fb3f36e841c2cc72e426a17bbe2" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Mon Jul 03 00:25:25 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Jul 03 15:27:09 2006 -0700" }, "message": "[PATCH] lockdep: annotate enable_in_hardirq()\n\nMake use of local_irq_enable_in_hardirq() API to annotate places that enable\nhardirqs in hardirq context.\n\nHas no effect on non-lockdep kernels.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Arjan van de Ven \u003carjan@linux.intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "602cada851b28c5792339786efe872fbdc1f5d41", "tree": "233d474b74d6038b5bb54a07ad91dd1bb10b0218", "parents": [ "82991c6f2c361acc17279b8124d9bf1878973435", "fee68d1cc0d9bd863e51c16cdcd707737b16bb38" ], "author": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Jun 29 14:19:21 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Jun 29 14:19:21 2006 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)\n [PATCH] devfs: Remove it from the feature_removal.txt file\n [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.\n [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV\n [PATCH] devfs: Remove the tty_driver devfs_name field as it\u0027s no longer needed\n [PATCH] devfs: Remove the line_driver devfs_name field as it\u0027s no longer needed\n [PATCH] devfs: Remove the videodevice devfs_name field as it\u0027s no longer needed\n [PATCH] devfs: Remove the gendisk devfs_name field as it\u0027s no longer needed\n [PATCH] devfs: Remove the miscdevice devfs_name field as it\u0027s no longer needed\n [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree\n [PATCH] devfs: Remove devfs_remove() function from the kernel tree\n [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree\n [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree\n [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree\n [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree\n [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree\n [PATCH] devfs: Remove devfs support from the sound subsystem\n [PATCH] devfs: Remove devfs support from the ide subsystem.\n [PATCH] devfs: Remove devfs support from the serial subsystem\n [PATCH] devfs: Remove devfs from the init code\n [PATCH] devfs: Remove devfs from the partition code\n ...\n" }, { "commit": "da574af755bcb1d604e01feadf2a8c31b364447c", "tree": "de8548adf6ea7205314f0813afb3fb83a9e7da6a", "parents": [ "2930d1bed7ffea3062e43b8acdeb9e0587bfc6a9" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Wed Jun 28 04:27:01 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Wed Jun 28 14:59:06 2006 -0700" }, "message": "[PATCH] ide: fix error handling for drives which clear the FIFO on error\n\nIf the controller FIFO cleared automatically on error we must not try\nand drain it as this will hang some chips.\n\nBased in concept on a broken patch from -mm some while back\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "94f6c59dcf16f10a20fbe3d1f098b159433f94bd", "tree": "06ec8cdb07de07389aa80fb394724ac07615a887", "parents": [ "aa4148cfc7b3b93eeaf755a7d14f10afaffe9a96" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jun 20 21:15:16 2005 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Mon Jun 26 12:25:06 2006 -0700" }, "message": "[PATCH] devfs: Remove devfs support from the ide subsystem.\n\nAlso removes the ide drive devfs_name field as it\u0027s no longer needed\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "dbe217af3be08346f4b1abb885c2d9ec29c98fac", "tree": "493ee2547ba3095d7aa468d6ddffc1a82f18ce56", "parents": [ "8e3a67a99231f9f3f476bc3449e93c9a6a17f2e0" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Sun Jun 25 05:47:44 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Jun 25 10:01:06 2006 -0700" }, "message": "[PATCH] IDE CD end-of media error fix\n\nThis is a patch from Alan that fixes a real ide-cd.c regression causing\nbogus \"Media Check\" failures for perfectly valid Fedora install ISOs, on\ncertain CD-ROM drives.\n\nThis is a forward port to 2.6.16 (from RHEL) of the minimal changes for the\nend of media problem. It may not be sufficient for some controllers\n(promise notably) and it does not touch the locking so the error path\nlocking is as horked as in mainstream.\n\nFrom: Ingo Molnar \u003cmingo@elte.hu\u003e\n\nI have ported the patch to 2.6.17-rc4 and tested it by provoking\nend-of-media IO errors with an unaligned ISO image. Unlike the vanilla\nkernel, the patched kernel interpreted the error condition correctly with\n512 byte granularity:\n\n hdc: command error: status\u003d0x51 { DriveReady SeekComplete Error }\n hdc: command error: error\u003d0x54 { AbortedCommand LastFailedSense\u003d0x05 }\n ide: failed opcode was: unknown\n ATAPI device hdc:\n Error: Illegal request -- (Sense key\u003d0x05)\n Illegal mode for this track or incompatible medium -- (asc\u003d0x64, ascq\u003d0x00)\n The failed \"Read 10\" packet command was:\n \"28 00 00 04 fb 78 00 00 06 00 00 00 00 00 00 00 \"\n end_request: I/O error, dev hdc, sector 1306080\n Buffer I/O error on device hdc, logical block 163260\n Buffer I/O error on device hdc, logical block 163261\n Buffer I/O error on device hdc, logical block 163262\n\nthe unpatched kernel produces an incorrect error dump:\n\n hdc: command error: status\u003d0x51 { DriveReady SeekComplete Error }\n hdc: command error: error\u003d0x54 { AbortedCommand LastFailedSense\u003d0x05 }\n ide: failed opcode was: unknown\n end_request: I/O error, dev hdc, sector 1306080\n Buffer I/O error on device hdc, logical block 163260\n hdc: command error: status\u003d0x51 { DriveReady SeekComplete Error }\n hdc: command error: error\u003d0x54 { AbortedCommand LastFailedSense\u003d0x05 }\n ide: failed opcode was: unknown\n end_request: I/O error, dev hdc, sector 1306088\n Buffer I/O error on device hdc, logical block 163261\n hdc: command error: status\u003d0x51 { DriveReady SeekComplete Error }\n hdc: command error: error\u003d0x54 { AbortedCommand LastFailedSense\u003d0x05 }\n ide: failed opcode was: unknown\n end_request: I/O error, dev hdc, sector 1306096\n Buffer I/O error on device hdc, logical block 163262\n\nI do not have the right type of CD-ROM drive to reproduce the end-of-media\ndata corruption bug myself, but this same patch in RHEL solved it.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Jens Axboe \u003caxboe@suse.de\u003e\nCc: Matt Mackall \u003cmpm@selenic.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "62c4f0a2d5a188f73a94f2cb8ea0dba3e7cf0a7f", "tree": "e85ca2d0dd43f90dccf758338764c3caa55f333f", "parents": [ "089f26d5e31b7bf42a9a8fefec08b30cd27f4b0e" ], "author": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Wed Apr 26 12:56:16 2006 +0100" }, "committer": { "name": "David Woodhouse", "email": "dwmw2@infradead.org", "time": "Wed Apr 26 12:56:16 2006 +0100" }, "message": "Don\u0027t include linux/config.h from anywhere else in include/\n\nSigned-off-by: David Woodhouse \u003cdwmw2@infradead.org\u003e\n" }, { "commit": "d3a7b202995421631f486313aacf9ab2ad48b2c8", "tree": "859f68dcc71d986ba2a9c92dacafab9eed9fae58", "parents": [ "6e89280184e4990f5ea80d2504af89b6099523c4" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Tue Apr 18 22:22:07 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Wed Apr 19 09:13:53 2006 -0700" }, "message": "[PATCH] remove the obsolete IDEPCI_FLAG_FORCE_PDC\n\nNoted by Sergei Shtylylov \u003csshtylyov@ru.mvista.com\u003e\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "208a08f7cc2a8932ed76162d9844f9ae7d7fc015", "tree": "6f0eb837cf8c1ce131c93ecf52476046519c5969", "parents": [ "f751d50f6dea1446797c9a31f5c183002e5780a8" ], "author": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Fri Mar 24 03:18:21 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Mar 24 07:33:28 2006 -0800" }, "message": "[PATCH] ide: Allow IDE interface to specify its not capable of 32-bit operations\n\nIn some embedded systems the IDE hardware interface may only support 16-bit\nor smaller accesses. Allow the interface to specify if this is the case\nand don\u0027t allow the drive or user to override the setting.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "a7ff7d41fec06c518caa82a818a70610a29d0e75", "tree": "3da27f3fa33d6bd61d690e89c44e6acf0b008394", "parents": [ "6842f8c8dac7c06cbf0aac87824f1ff337be31cb" ], "author": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Feb 03 03:04:56 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Feb 03 08:32:12 2006 -0800" }, "message": "[PATCH] drivers/ide/ide-io.c: make __ide_end_request() static\n\nSince there\u0027s no longer any external user, we can make __ide_end_request()\nstatic.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "9810933701a09f9c4dd0ad963d5ec2efb7df07b7", "tree": "a82e186d96e443099fc67d9788943befcba996b3", "parents": [ "3b6ce2497f091620dd4c172fc11d867a9b072dc5" ], "author": { "name": "Richard Purdie", "email": "rpurdie@rpsys.net", "time": "Fri Feb 03 03:04:55 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Feb 03 08:32:12 2006 -0800" }, "message": "[PATCH] stop CompactFlash devices being marked as removable\n\nThis patch stops CompactFlash devices being marked as removable. They are\nnot removable (as defined by Linux) as the media and device are\ninseparable. When a card is removed, the whole device is removed from the\nsystem and never sits in a media-less state.\n\nThis stops some nasty udev device creation/destruction loops.\n\nFurther, once this change is made, there is no need for ide to can be\nremoved from ide_drive_t.\n\nSigned-off-by: Richard Purdie \u003crpurdie@rpsys.net\u003e\nAcked-by: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "4031bbe4bbec6c0fe50412ef7fb43a270b0f29f1", "tree": "1e1449ba492ab04d8c5fbc75f9761be237bcae72", "parents": [ "bbbe3a41f7ee529f7f4fdcc1bc1157234bac0766" ], "author": { "name": "Russell King", "email": "rmk@arm.linux.org.uk", "time": "Fri Jan 06 11:41:00 2006 +0000" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Fri Jan 13 11:26:10 2006 -0800" }, "message": "[PATCH] Add ide_bus_type probe and remove methods\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "ba027def7be0d6494b72603d5758acc0fb1c7514", "tree": "0390413d299350f838f2fc01ae222d8d3cdf6194", "parents": [ "661dd5c840851194c7ee5a2603d5354dcf9bd212" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Thu Jan 12 20:44:12 2006 +0100" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Thu Jan 12 12:00:47 2006 -0800" }, "message": "[PATCH] Revert ide softirq handling\n\nThere\u0027s a problem with the REQ_BLOCK_PC handling as well (bad -\u003edata_len\nhandling) where it could actually complete a request ahead of time. I\nsuggest we just back this out for now, I will resubmit it later when I\u0027m\nfully confident in it.\n\nThis reverts commit 8672d57138b34447719cd7749f3d21070e1175a1\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "f36d4024caa3790606e43228a574157c45b73b22", "tree": "eb3d5e39d5fd83731bf608c4a7c424916e68c007", "parents": [ "3fe0c2776113c24b4b30374003f934cf44280db5" ], "author": { "name": "Aleksey Makarov", "email": "amakarov@ru.mvista.com", "time": "Mon Jan 09 15:59:27 2006 -0800" }, "committer": { "name": "Ingo Molnar", "email": "mingo@hera.kernel.org", "time": "Mon Jan 09 15:59:27 2006 -0800" }, "message": "[PATCH] mutex subsystem, semaphore to completion: IDE -\u003egendev_rel_sem\n\nThe patch changes semaphores that are initialized as\nlocked to complete().\n\nSource: MontaVista Software, Inc.\n\nModified-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\n\nThe following patch is from Montavista. I modified it slightly.\nSemaphores are currently being used where it makes more sense for\ncompletions. This patch corrects that.\n\nSigned-off-by: Aleksey Makarov \u003camakarov@ru.mvista.com\u003e\nSigned-off-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\n" }, { "commit": "8672d57138b34447719cd7749f3d21070e1175a1", "tree": "dd23c85cf45c11f5d8f13d748002cddcb5551ab4", "parents": [ "1aea6434eebd25e532d2e5ddabf2733af4e1ff0b" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Mon Jan 09 16:03:35 2006 +0100" }, "committer": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Mon Jan 09 16:03:35 2006 +0100" }, "message": "[IDE] Use the block layer deferred softirq request completion\n\nThis patch makes IDE use the new blk_complete_request() interface.\nThere\u0027s still room for improvement, as __ide_end_request() really\ncould drop the lock after getting HWGROUP-\u003erq (why does it need to\nhold it in the first place? If -\u003erq access isn\u0027t serialized, we are\nscrewed anyways).\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "22fc6eccbf4ce4eb6265e6ada7b50a7b9cc57d05", "tree": "3887dc6f1eeb658d773be037971b98d6f5fb3dd7", "parents": [ "6d524aed1f50b2b1d5b4ad5a4e2fe3f38106d0a6" ], "author": { "name": "Ravikiran G Thirumalai", "email": "kiran@scalex86.org", "time": "Sun Jan 08 01:01:27 2006 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Sun Jan 08 20:13:38 2006 -0800" }, "message": "[PATCH] Change maxaligned_in_smp alignemnt macros to internodealigned_in_smp macros\n\n____cacheline_maxaligned_in_smp is currently used to align critical structures\nand avoid false sharing. It uses per-arch L1_CACHE_SHIFT_MAX and people find\nL1_CACHE_SHIFT_MAX useless.\n\nHowever, we have been using ____cacheline_maxaligned_in_smp to align\nstructures on the internode cacheline size. As per Andi\u0027s suggestion,\nfollowing patch kills ____cacheline_maxaligned_in_smp and introduces\nINTERNODE_CACHE_SHIFT, which defaults to L1_CACHE_SHIFT for all arches.\nArches needing L3/Internode cacheline alignment can define\nINTERNODE_CACHE_SHIFT in the arch asm/cache.h. Patch replaces\n____cacheline_maxaligned_in_smp with ____cacheline_internodealigned_in_smp\n\nWith this patch, L1_CACHE_SHIFT_MAX can be killed\n\nSigned-off-by: Ravikiran Thirumalai \u003ckiran@scalex86.org\u003e\nSigned-off-by: Shai Fultheim \u003cshai@scalex86.org\u003e\nSigned-off-by: Andi Kleen \u003cak@suse.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "7b4df9ece9b4c4a754bd1f5603cdabff26b987e5", "tree": "ab1655bb53ead71d6de97193c5cc2355df8bd5e5", "parents": [ "517bd1d5eac739a7f398058a9524386667fff032" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Dec 15 02:20:15 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Dec 15 02:20:15 2005 +0100" }, "message": "[PATCH] ide: cleanup ide_driver_t\n\nRemove unused fields: ioctl, ata[pi]_prebuilder.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "517bd1d5eac739a7f398058a9524386667fff032", "tree": "4b39d9580ceb5ddb7f3f0866abaa9034fced0265", "parents": [ "d36fef6f5aa4a6a1f44490455393a5b22137a6cd" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Dec 15 02:19:57 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Dec 15 02:19:57 2005 +0100" }, "message": "[PATCH] ide: cleanup ide.h\n\nRemove:\n* stale comment\n* unused HOST() macro\n* unused ata_{error,control}_t types\n* unused atapi_select_t type\n* ide_init_subdrivers() prototype\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "65e5f2e3b457b6b20a5c4481312189d141a33d24", "tree": "cce866efd8eea1815cb054a274e165bdbba16180", "parents": [ "38f9d412be1ed29ee3b41782f22fd85b1c95fbed" ], "author": { "name": "Jordan Crouse", "email": "jordan.crouse@amd.com", "time": "Thu Dec 15 02:16:18 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Dec 15 02:16:18 2005 +0100" }, "message": "[PATCH] ide: core modifications for AU1200\n\nbart: slightly modified by me\n\nSigned-off-by: Jordan Crouse \u003cjordan.crouse@amd.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "071ffcc0f7dd8df871f443be3f5059f05da528e2", "tree": "319a5607b382a3515d9e6fea04a6ee4b116c9efc", "parents": [ "84e7b9e94b474d40582090b7e09139f0029cff2c" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Nov 19 22:01:35 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Nov 19 22:01:35 2005 +0100" }, "message": "[PATCH] ide: remove unused ide_action_t:ide_next\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "84e7b9e94b474d40582090b7e09139f0029cff2c", "tree": "81cc5b2bd67c1322bda08feb34d57193f78728d1", "parents": [ "14351f8e573442e2437d4b177fa10075aaefd5c9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Nov 19 21:54:04 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Nov 19 21:54:04 2005 +0100" }, "message": "[PATCH] ide: remove duplicate documentation for ide_do_drive_cmd()\n\nRemove duplicate documentation for ide_do_drive_cmd() from\n\u003clinux/ide.h\u003e, this function is already documented in ide-io.c.\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "4ef3b8f4a5c056d5f784725974a530d1a7b4a811", "tree": "f5cb477ef8b89af4fba8592fdcefde733947e1ef", "parents": [ "7462cbff7d4c2dc0d182613fb4e801efb29b90ac" ], "author": { "name": "Laurent Riffard", "email": "laurent.riffard@free.fr", "time": "Fri Nov 18 22:15:40 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Nov 18 22:15:40 2005 +0100" }, "message": "[PATCH] ide: remove ide_driver_t.owner field\n\nThe structure ide_driver_t have a .owner field which is a duplicate\nof .gendriver.owner field (.gen_driver is a struct device_driver).\n\nThis patch removes ide_driver_t\u0027s owner field.\n\nSigned-off-by: Laurent Riffard \u003claurent.riffard@free.fr\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "863b18f4b5e7d9e6903b353328cf6fa084dbb619", "tree": "e181466c3e7e676fa08e4bce2052ada38d98228d", "parents": [ "f8eb1005a5bdb019d2a4ff3ef8d8e8015b22afcb" ], "author": { "name": "Laurent riffard", "email": "laurent.riffard@free.fr", "time": "Thu Oct 27 23:12:54 2005 +0200" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Nov 10 16:09:16 2005 -0800" }, "message": "[PATCH] PCI: automatically set device_driver.owner\n\nA nice feature of sysfs is that it can create the symlink from the\ndriver to the module that is contained in it.\n\nIt requires that the device_driver.owner is set, what is not the\ncase for many PCI drivers.\n\nThis patch allows pci_register_driver to set automatically the\ndevice_driver.owner for any PCI driver.\n\nCredits to Al Viro who suggested the method.\n\nSigned-off-by: Laurent Riffard \u003claurent.riffard@free.fr\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n--\n\n drivers/ide/setup-pci.c | 12 +++++++-----\n drivers/pci/pci-driver.c | 9 +++++----\n include/linux/ide.h | 3 ++-\n include/linux/pci.h | 10 ++++++++--\n 4 files changed, 22 insertions(+), 12 deletions(-)\n" }, { "commit": "83ae20c849f1bff32100fa8584408dca99ce4a62", "tree": "43e73e78a51c9c7c486e883dda25417d18f7e202", "parents": [ "4349d5cdf28d46c22d467079e80ee9695dcec0ad" ], "author": { "name": "Bjorn Helgaas", "email": "bjorn.helgaas@hp.com", "time": "Wed Nov 09 22:58:07 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Nov 09 22:58:07 2005 +0100" }, "message": "[PATCH] ide: move CONFIG_IDE_MAX_HWIFS into linux/ide.h\n\nCONFIG_IDE_MAX_HWIFS is a generic thing, no need to have it duplicated\nby every arch that uses it.\n\nSigned-off-by: Bjorn Helgaas \u003cbjorn.helgaas@hp.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "4349d5cdf28d46c22d467079e80ee9695dcec0ad", "tree": "f16b8cb1689a82ebb48d95f9be2f66b56fb62189", "parents": [ "a5ee3634630c218e86afc5bae2acb55b9e47625d" ], "author": { "name": "Hannes Reinecke", "email": "hare@suse.de", "time": "Wed Nov 09 22:47:18 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed Nov 09 22:47:18 2005 +0100" }, "message": "[PATCH] ide: incorrect device link for ide-cs\n\nDevices driven by ide-cs will appear under /sys/devices instead of the\nappropriate PCMCIA device. To fix this I had to extend the hw_regs_t\nstructure with a \u0027struct device\u0027 field, which allows us to set the\nparent link for the appropriate hwif.\n\nSigned-off-by: Hannes Reinecke \u003chare@suse.de\u003e\nSigned-off-by: Jens Axboe \u003caxboe@suse.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "26a940e21752e0de8f068f77dad606a7d1986937", "tree": "88e46225e19c4c72fa6914a21afb28c6ea52bfc6", "parents": [ "64abf64d10b3a547becefeb26394dfbefac273fb" ], "author": { "name": "Pete Popov", "email": "ppopov@embeddedalley.com", "time": "Thu Sep 15 08:03:12 2005 +0000" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Sat Oct 29 19:32:20 2005 +0100" }, "message": "Cleaned up AMD Au1200 IDE driver:\n- converted to platform bus\n- removed pci dependencies\n- removed virt_to_phys/phys_to_virt calls\n \nSystem now can root off of a disk.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n\ndiff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README\nnew file mode 100644\n" }, { "commit": "86b3786078d63242d3194ffc58ae8dae1d1bbef3", "tree": "518f62158f0923573decb8f072ac7282fb7575cb", "parents": [ "aeb3f76350e78aba90653b563de6677b442d21d6" ], "author": { "name": "Christoph Lameter", "email": "christoph@lameter.com", "time": "Tue Aug 09 19:59:21 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Aug 09 20:21:31 2005 -0700" }, "message": "[PATCH] Fix ide-disk.c oops caused by hwif \u003d\u003d NULL\n\n1. Move hwif_to_node to ide.h\n\n2. Use hwif_to_node in ide-disk.c\n\nSigned-off-by: Christoph Lameter \u003cclameter@sgi.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "1946089a109251655c5438d92c539bd2930e71ea", "tree": "819a492d5a7c4e6e695b150a86abeb99d5ac46eb", "parents": [ "8c5a09082f4e61a176382e96a831a0636b918602" ], "author": { "name": "Christoph Lameter", "email": "christoph@lameter.com", "time": "Thu Jun 23 00:08:19 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Thu Jun 23 09:45:09 2005 -0700" }, "message": "[PATCH] NUMA aware block device control structure allocation\n\nPatch to allocate the control structures for for ide devices on the node of\nthe device itself (for NUMA systems). The patch depends on the Slab API\nchange patch by Manfred and me (in mm) and the pcidev_to_node patch that I\nposted today.\n\nDoes some realignment too.\n\nSigned-off-by: Justin M. Forbes \u003cjmforbes@linuxtx.org\u003e\nSigned-off-by: Christoph Lameter \u003cchristoph@lameter.com\u003e\nSigned-off-by: Pravin Shelar \u003cpravin@calsoftinc.com\u003e\nSigned-off-by: Shobhit Dayal \u003cshobhit@calsoftinc.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "8604affde9d4f52f04342d6a37c77d95fa167e7a", "tree": "12143c1be244c69c7c2b488a34856f60d0625e03", "parents": [ "bef9c558841604116704e10b3d9ff3dbf4939423" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@elka.pw.edu.pl", "time": "Thu May 26 14:55:34 2005 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@elka.pw.edu.pl", "time": "Thu May 26 14:55:34 2005 +0200" }, "message": "[PATCH] convert IDE device drivers to driver-model\n\n* add ide_bus_match() and export ide_bus_type\n* split ide_remove_driver_from_hwgroup() out of ide_unregister()\n* move device cleanup from ide_unregister() to drive_release_dev()\n* convert ide_driver_t-\u003ename to driver-\u003ename\n* convert ide_driver_t-\u003e{attach,cleanup} to driver-\u003e{probe,remove}\n* remove ide_driver_t-\u003ebusy as ide_bus_type-\u003esubsys.rwsem\n protects against concurrent -\u003e{probe,remove} calls\n* make ide_{un}register_driver() void as it cannot fail now\n* use driver_{un}register() directly, remove ide_{un}register_driver()\n* use device_register() instead of ata_attach(), remove ata_attach()\n* add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op\n* fix ide_replace_subdriver() and move it to ide-proc.c\n* remove ide_driver_t-\u003edrives, ide_drives and drives_lock\n* remove ide_driver_t-\u003edrivers, drivers and drivers_lock\n* remove ide_drive_t-\u003edriver and DRIVER() macro\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@elka.pw.edu.pl\u003e" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }