)]}' { "log": [ { "commit": "f92e8f8144243a3651b2e350b706ea2d04931f8c", "tree": "e008f4b0896cdeb2fb354a1e1babd2a568172498", "parents": [ "6b8274fafeec9b112cee5b6ced5f9189957c889f" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed Feb 17 18:45:25 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:29 2010 +0100" }, "message": "mfd: Add WM831x revision B support\n\nRevision B of the WM831x devices changes the sense of the tristate\nbit for GPIO configuration, inverting it to become an enable instead.\nTake account of this in the gpiolib driver.\n\nA current sink regulation status bit has also been added in revision B,\nadd a flag indicating if it\u0027s present but don\u0027t use it yet.\n\nThis revision also adds an interrupt on key up for the ON pin event\nwhich the existing code is able to take advantage of.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "6b8274fafeec9b112cee5b6ced5f9189957c889f", "tree": "500a2acbbcbf67604293533fdfa33d3fa3bb09d1", "parents": [ "3383d23d86791503559cb87837491af37469d9e5" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed Feb 17 18:45:24 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:29 2010 +0100" }, "message": "gpiolib: Correct debugfs display of WM831x GPIO inversion\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "3383d23d86791503559cb87837491af37469d9e5", "tree": "81755ca266174145fac1c14b5cf4ab9499d505ce", "parents": [ "7ee422dc6e947fcdc153246d47f26ae0b7cf083d" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed Feb 17 18:04:35 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:28 2010 +0100" }, "message": "gpiolib: Actually set output state in wm831x_gpio_direction_output()\n\nwm831x_gpio_direction_output() ignored the state passed into it.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "7ee422dc6e947fcdc153246d47f26ae0b7cf083d", "tree": "840b9c7b7a11abe91af7ac459bd68888ae39ffe7", "parents": [ "707f0b2fbc65876e8abd94d26d8d0620600c05d4" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Wed Feb 17 16:38:23 2010 +0900" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:27 2010 +0100" }, "message": "tmio_mmc: Balance cell enable()/disable() calls\n\nThis patch adds cell-\u003edisable() calls to the tmio-mmc\nprobe() error handling and the remove() function.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "707f0b2fbc65876e8abd94d26d8d0620600c05d4", "tree": "a4c1e5fa0c4c5ef240c3b0b78eb07438403e82bb", "parents": [ "6d9af5af61a6c30676ef6f56a791d4036c92d249" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Wed Feb 17 16:38:14 2010 +0900" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:27 2010 +0100" }, "message": "tmio_mmc: Remove const from platform data V3\n\nRemove const from the tmio-mmc platform data hclk V3.\nThis change makes it possible to remove the type cast\nfrom the sh_mobile_sdhi driver which is using the clock\nframework to get the clock rate.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "6d9af5af61a6c30676ef6f56a791d4036c92d249", "tree": "0bd171c42545303b2409202888af94bc4e5cedc1", "parents": [ "b741d440a97c376af309e902eeb2f3c5673d2c92" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Wed Feb 17 16:38:04 2010 +0900" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:26 2010 +0100" }, "message": "tmio_mmc: Use 100ms mmc_detect_change() delay\n\nThis patch changes the tmio_mmc driver to wait 100ms\nbefore checking the card detect status. This type of\ndelay is quite common among mmc drivers, it seems that\nmost hardware platforms need to give the hardware some\ntime to settle before checking card availabilty.\n\nHotplug is half-broken without this patch on the sh7724\nEcovec board. Hot insertion seems ok but eject is never\ndetected without this patch.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "b741d440a97c376af309e902eeb2f3c5673d2c92", "tree": "9dd347f1252567a4b0695051d81b11b24317ecbf", "parents": [ "a8c39d8deb8341d15fc0eabaa9750f7a1db9d0df" ], "author": { "name": "Yusuke Goda", "email": "goda.yusuke@renesas.com", "time": "Wed Feb 17 16:37:55 2010 +0900" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:26 2010 +0100" }, "message": "tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2\n\nEnable MMC_CAP_XX support in the tmio_mmc driver if\npdata-\u003ecapabilities is set.\n\nSigned-off-by: Yusuke Goda \u003cgoda.yusuke@renesas.com\u003e\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "a8c39d8deb8341d15fc0eabaa9750f7a1db9d0df", "tree": "53d90217dde532e37ee0b55c44891bfab26a3dcd", "parents": [ "fa0d976298b25d090fafc3460c63fee1c8eea854" ], "author": { "name": "Guennadi Liakhovetski", "email": "g.liakhovetski@gmx.de", "time": "Wed Feb 17 16:37:45 2010 +0900" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:25 2010 +0100" }, "message": "tmio_mmc: Keep card-detect interrupts enabled\n\nOn SuperH platforms the SDHI controller does not produce any command IRQs after\na completed IO. This leads to card-detect interrupts staying disabled. Do not\ndisable card-detect interrupts on DATA IRQs.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "fa0d976298b25d090fafc3460c63fee1c8eea854", "tree": "feef3ece7c65834c244617c5d89317b10f6a4698", "parents": [ "a29aaf55cd6faa75e35abfe00bd3ffc537490485" ], "author": { "name": "Balaji T K", "email": "balajitk@ti.com", "time": "Fri Feb 19 12:39:38 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:24 2010 +0100" }, "message": "mfd: Add twl6030 base addr for ID0, ID1, ID2\n\nAdd base address for generic slave ID0, ID1, ID2\nand introduced one more entry to align RTC module number between\ntwl4030 and twl6030\n\nSigned-off-by: Balaji T K \u003cbalajitk@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "a29aaf55cd6faa75e35abfe00bd3ffc537490485", "tree": "8f883a25bb154df5bff43a3980752a973da99a10", "parents": [ "e82c60ae7d3a7f19c4b9b3e7bd6ea298fa5efe93" ], "author": { "name": "Moiz Sonasath", "email": "m-sonasath@ti.com", "time": "Tue Feb 16 18:57:21 2010 -0600" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:23 2010 +0100" }, "message": "mfd: Disable TWL4030/5030 I2C1/I2C4 internal pull-ups\n\nThis patch disables TWL4030/5030 I2C1 adn I2C4(SR) internal pull-up, to\nuse only the external HW resistor \u003e\u003d470 Ohm for the assured\nfunctionality in HS mode.\n\nWhile testing the I2C in High Speed mode, it was discovered that\nwithout a proper pull-up resistor, there is data corruption during\nmulti-byte transfer. RTC(time_set) test case was used for testing.\n\nFrom the analysis done, it was concluded that ideally we need a\npull-up of 1.6k Ohm(recomended) or atleast 470 Ohm or greater for\nassured performance in HS mode.\n\nSigned-off-by: Moiz Sonasath \u003cm-sonasath@ti.com\u003e\nSigned-off-by: Allen Pais \u003callen.pais@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "e82c60ae7d3a7f19c4b9b3e7bd6ea298fa5efe93", "tree": "b7781f001304ffd7bb5223bb6642a2431aed208a", "parents": [ "91fedede0338eb6203cdd618d8ece873fdb7c22c" ], "author": { "name": "Denis Turischev", "email": "denis@compulab.co.il", "time": "Fri Feb 19 11:26:25 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:22 2010 +0100" }, "message": "mfd: Introduce lpc_sch for Intel SCH LPC bridge\n\nIntel Poulsbo (SCH) chipset LPC bridge controller contains several\nfunctions. Creating and MFD driver for the LPC bridge controller allows\nsimultaneous use of SMBus and GPIO interfaces on the SCH.\n\nSigned-off-by: Denis Turischev \u003cdenis@compulab.co.il\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "91fedede0338eb6203cdd618d8ece873fdb7c22c", "tree": "89ef0361a9842b0b8762b21445752522ab831d35", "parents": [ "14e5c82ca32870698b7cbe54196e00682d929ca5" ], "author": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Feb 19 11:07:59 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:21 2010 +0100" }, "message": "mfd: Check for ACPI conflicts\n\nFor ACPI based systems, we should check for ACPI conflicts when adding the\nplatform devices. The test will always succeed for non ACPI platforms.\n\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "14e5c82ca32870698b7cbe54196e00682d929ca5", "tree": "3bc4cc9028ef59e98c9dd598865adf1b8d8528f4", "parents": [ "6985403138b74ad28c8ddac8baf88869556bec9a" ], "author": { "name": "Eduardo Valentin", "email": "eduardo.valentin@nokia.com", "time": "Thu Feb 11 13:47:09 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:21 2010 +0100" }, "message": "mfd: Fix twl_has_pwrbutton typo\n\nChange the typo CONFIG_INPUT_TWL4030_PWBUTTON_MODULE in the\ntwl_has_pwrbutton definition to CONFIG_INPUT_TWL4030_PWRBUTTON_MODULE.\n\nSigned-off-by: Eduardo Valentin \u003ceduardo.valentin@nokia.com\u003e\nSigned-off-by: Christoph Egger \u003csiccegge@stud.informatik.uni-erlangen.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "6985403138b74ad28c8ddac8baf88869556bec9a", "tree": "74c315ae903bd1eff89bb164eb1dac07fb315de7", "parents": [ "2afa62ea76027b00e472ddb672191e6e15425b43" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Wed Feb 03 15:40:59 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:20 2010 +0100" }, "message": "input: Support onkey in 88pm860x\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nAcked-by: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "2afa62ea76027b00e472ddb672191e6e15425b43", "tree": "3c70f220af28c859fea638e5eae4aed726f5dcdd", "parents": [ "7731074ab21745cde00578148ce760df107eaf27" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Mon Feb 08 05:02:00 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:20 2010 +0100" }, "message": "mfd: Use genirq in 88pm860x\n\nUse genirq to simplify IRQ handling in 88pm860x. Remove the interface of\nmask/free IRQs on 88pm860x. All these work is taken by genirq. Update the\ntouchscreen driver of 88pm860x since IRQ handling is changed.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "7731074ab21745cde00578148ce760df107eaf27", "tree": "3478c216eefd3511bee6fca1fff7b5eb7c67b308", "parents": [ "e8343ddaccb322b1a2a989ac362cabd1e94597ad" ], "author": { "name": "Joonyoung Shim", "email": "jy0922.shim@samsung.com", "time": "Sun Feb 07 10:16:14 2010 +0900" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:19 2010 +0100" }, "message": "mfd: Fix WM8994 error handling\n\nThis patch fixes wrong goto statement for error handling on probe.\n\nSigned-off-by: Myungjoo Ham \u003cmyungjoo.ham@samsung.com\u003e\nSigned-off-by: Joonyoung Shim \u003cjy0922.shim@samsung.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "e8343ddaccb322b1a2a989ac362cabd1e94597ad", "tree": "fde51c79821ce433eaadb1a0a28bdb9d07a838bc", "parents": [ "34c9120805ff4b3f7a8053bd64157ba564774433" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Wed Feb 03 15:38:12 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:18 2010 +0100" }, "message": "mfd: Use i2c_dummy in 88pm860x\n\nUse i2c_dummy in 88pm860x driver to avoid using static in probe function.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "34c9120805ff4b3f7a8053bd64157ba564774433", "tree": "5254980a10c5b39fcbc72b2715b91d1f0d13248d", "parents": [ "28db38888b2a53b6bdd70104c2d2a199632ca507" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Wed Feb 03 15:37:23 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:17 2010 +0100" }, "message": "mfd: Clean code in max8925\n\nRemove unused definitions.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "28db38888b2a53b6bdd70104c2d2a199632ca507", "tree": "37534e1bf9f1fe8b17583a0ed8c98efe5bc16393", "parents": [ "a39069f6ce6500a5ca39e534108247f25169d8e0" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Mon Jan 25 10:38:35 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:17 2010 +0100" }, "message": "power_supply: Enable power supply of max8925\n\nMAX8925 is a PMIC that contains charger component\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "a39069f6ce6500a5ca39e534108247f25169d8e0", "tree": "f6d2b87316e51dcb5d3622ec86028d9a5e7da0a2", "parents": [ "1f1cf8f98cf6588365efeaab8e7e7758aaa77f6e" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Mon Jan 25 06:30:29 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:16 2010 +0100" }, "message": "rtc: Enable rtc in max8925\n\nMAX8925 is a PMIC that contains RTC component.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "1f1cf8f98cf6588365efeaab8e7e7758aaa77f6e", "tree": "f2e17f85409bb6e2f75e152983e62fd2c4372859", "parents": [ "b13c0df517bedbc40cff4ab5f797b08b1111918b" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Fri Feb 05 16:07:54 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:16 2010 +0100" }, "message": "mfd: Update irq handler in max8925\n\nUpdate thread irq handler. Simply the interface of using thread irq.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "b13c0df517bedbc40cff4ab5f797b08b1111918b", "tree": "ec46400a6ea0b85c72901ce5ace06b8f3d4d635b", "parents": [ "1ea933f4cdbb88197139b9e62778beba0120e229" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Mon Jan 25 06:26:34 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:15 2010 +0100" }, "message": "mfd: Update i2c driver for max8925\n\nUpdate I2C driver in order to fit all of three I2C components in max8925.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "1ea933f4cdbb88197139b9e62778beba0120e229", "tree": "0e6c149ae3e719c870ce271530049c7497cd636e", "parents": [ "2955c309921e23d592ef585cf8e7ded1e11565b7" ], "author": { "name": "Mike Turquette", "email": "mturquette@ti.com", "time": "Fri Feb 05 09:51:37 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:14 2010 +0100" }, "message": "mfd: Program twl4030 remap_sleep correctly\n\nVariable remap was incorrectly referencing remap_off for the remap_sleep\ncase when configuring TWL4030 power scripts.\n\nSigned-off-by: Mike Turquette \u003cmturquette@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "2955c309921e23d592ef585cf8e7ded1e11565b7", "tree": "a089a631917a70a8db611d75e7c7fe3f281c929c", "parents": [ "9e50108668a70a9927257298bd4e679300124420" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Jan 29 18:20:30 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:13 2010 +0100" }, "message": "gpiolib: Add WM8994 GPIO support\n\nThe WM8994 has 11 GPIO lines.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "9e50108668a70a9927257298bd4e679300124420", "tree": "659100bfbfaf64a3b385573a4d4fb7fb50468eb7", "parents": [ "1c4d3b70a40c666331052adf77933e6994590b74" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Jan 29 18:20:29 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:13 2010 +0100" }, "message": "mfd: Add initial WM8994 support\n\nThe WM8994 is a highly integrated ultra low power audio hub CODEC.\nSince it includes on-board regulators and GPIOs it is represented\nas a multi-function device, though the overwhelming majority of\nthe functionality is provided by the ASoC CODEC driver.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "1c4d3b70a40c666331052adf77933e6994590b74", "tree": "81319887f935a38847b6be4cf2f7010c6bc0b0e8", "parents": [ "bef3e20c9f8ce5cb8809cf33494d95a78db07857" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Fri Jan 29 18:20:28 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:12 2010 +0100" }, "message": "mfd: Add WM8994 register definitions\n\nAs a separate patch due to the large size.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "bef3e20c9f8ce5cb8809cf33494d95a78db07857", "tree": "7835d0f97f503c2afecf0cc9d425e3980a26c6ec", "parents": [ "f7ea2dc59ed46dcd0f1cfaccda02211f4507207b" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Wed Jan 20 19:55:34 2010 -0800" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:12 2010 +0100" }, "message": "mfd: htc-i2cpld depends on GPIOLIB\n\nhtc-i2cpld should depend on GPIOLIB, otherwise there are many\nbuild errors:\n\ndrivers/mfd/htc-i2cpld.c:50: error: field \u0027chip_out\u0027 has incomplete type\ndrivers/mfd/htc-i2cpld.c:54: error: field \u0027chip_in\u0027 has incomplete type\ndrivers/mfd/htc-i2cpld.c:243: warning: type defaults to \u0027int\u0027 in declaration of \u0027__mptr\u0027\ndrivers/mfd/htc-i2cpld.c:243: warning: initialization from incompatible pointer type\ndrivers/mfd/htc-i2cpld.c:278: warning: type defaults to \u0027int\u0027 in declaration of \u0027__mptr\u0027\ndrivers/mfd/htc-i2cpld.c:278: warning: initialization from incompatible pointer type\ndrivers/mfd/htc-i2cpld.c:282: warning: type defaults to \u0027int\u0027 in declaration of \u0027__mptr\u0027\ndrivers/mfd/htc-i2cpld.c:282: warning: initialization from incompatible pointer type\ndrivers/mfd/htc-i2cpld.c:315: error: dereferencing pointer to incomplete type\ndrivers/mfd/htc-i2cpld.c:322: warning: type defaults to \u0027int\u0027 in declaration of \u0027__mptr\u0027\ndrivers/mfd/htc-i2cpld.c:322: warning: initialization from incompatible pointer type\ndrivers/mfd/htc-i2cpld.c:467+: error: dereferencing pointer to incomplete type [19X]\ndrivers/mfd/htc-i2cpld.c:490: error: implicit declaration of function \u0027gpiochip_add\u0027\ndrivers/mfd/htc-i2cpld.c:504: error: implicit declaration of function \u0027gpiochip_remove\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "f7ea2dc59ed46dcd0f1cfaccda02211f4507207b", "tree": "a8afa0e127faa17233800a66d80cb03d41e5bd18", "parents": [ "ca229f1b624a72a1c9eb1d94bbca7a0c094a1b8b" ], "author": { "name": "Christoph Egger", "email": "siccegge@stud.informatik.uni-erlangen.de", "time": "Fri Jan 15 15:33:46 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:11 2010 +0100" }, "message": "mfd: Remove leftover from discontinued TWL4030 battery patch\n\nThe TWL4030_BCI_BATTERY config option originates from a patch to the\nomap git tree. However inclusion in linux was seemingly rejected and\nthe functionality nears inclusion under a different name so this\nremoves the bits of the old version that made it into the mainline\nkernel again.\n\nSigned-off-by: Christoph Egger \u003csiccegge@stud.informatik.uni-erlangen.de\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ca229f1b624a72a1c9eb1d94bbca7a0c094a1b8b", "tree": "02f81ee8c31fc635747fde3650d113aa5fd3aef1", "parents": [ "2071db4848ea809887e97248dd3dec02a2e3dd6b" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@stericsson.com", "time": "Sun Jan 17 20:57:43 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:11 2010 +0100" }, "message": "mfd: Fix debugfs code in AB3100 OTP driver\n\nThis fixes the aged and unreachable debugfs code in the AB3100\nOTP driver so that it\u0027s (A) reachable and (B) works. Bug detected\nin parallell by Christoph Egger using VAMOS and Robert P. J. Day\nby his kernel scanning script.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nCc: Christoph Egger \u003csiccegge@stud.informatik.uni-erlangen.de\u003e\nCc: Robert P. J. Day \u003crpjday@crashcourse.ca\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "2071db4848ea809887e97248dd3dec02a2e3dd6b", "tree": "6af9118a691d9d68da42004e29e834fa3d2508d5", "parents": [ "6048a3dd2371c58611ea0ab8b306f8f1469399ae" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@stericsson.com", "time": "Tue Jan 19 11:41:52 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:10 2010 +0100" }, "message": "mfd: Use AB3100 MFD core IRQ for interrupt randomness\n\nThis reintroduces the entropy sampling of the AB3100 IRQ as the\nIRQF_SAMPLE_RANDOM is going out according to the feature removal\nschedule. I\u0027m trying to do this the right way then, so CC:ing some\nrandom people for a quick review. We add entropy for interrupt\nevents in the AB3100 which are truly random in nature, like\nexternal cables being connected, voltages on batteries dropping\nbelow certain ranges, ADC triggers or overheating.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nCc: Robin Getz \u003crgetz@blackfin.uclinux.org\u003e\nAcked-by: Matt Mackall \u003cmpm@selenic.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "6048a3dd2371c58611ea0ab8b306f8f1469399ae", "tree": "961cff65dda1ea4ab5049d01d858c95ee2ac5044", "parents": [ "08ff6f2a9908c87b0adffe6453291be22db3a62f" ], "author": { "name": "Cory Maccarrone", "email": "darkstar6262@gmail.com", "time": "Tue Jan 19 11:22:45 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:09 2010 +0100" }, "message": "mfd: Add HTCPLD driver\n\nThis change introduces a driver for the HTC PLD chip found\non some smartphones, such as the HTC Wizard and HTC Herald.\nIt works through the I2C bus and acts as a GPIO extender.\nSpecifically:\n\n * it can have several sub-devices, each with its own I2C\n address\n * Each sub-device provides 8 output and 8 input pins\n * The chip attaches to one GPIO to signal when any of the\n input GPIOs change -- at which point all chips must be\n scanned for changes\n\nThis driver implements the GPIOs throught the kernel\u0027s\nGPIO and IRQ framework. This allows any GPIO-servicing\ndrivers to operate on htcpld pins, such as the gpio-keys\nand gpio-leds drivers.\n\nSigned-off-by: Cory Maccarrone \u003cdarkstar6262@gmail.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "08ff6f2a9908c87b0adffe6453291be22db3a62f", "tree": "27d7cd7c2466c1339994027fb1aba88189fa6424", "parents": [ "4f811ef0d40048ae80b6ea77080b814725bffc58" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Mon Jan 11 13:10:08 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:08 2010 +0100" }, "message": "regulator: Add max8925 support\n\nMAX8925 contains 3 Buck and 20 LDO regulator.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "4f811ef0d40048ae80b6ea77080b814725bffc58", "tree": "497168c5c8059bed17c50c8b44d9691e5634f8bb", "parents": [ "1ad998934e9c6cbae91662a05e0cb8772b1f4f75" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Fri Dec 18 10:01:45 2009 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:08 2010 +0100" }, "message": "backlight: Enable max8925 backlight\n\nEnable max8925 backlight sub device.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "1ad998934e9c6cbae91662a05e0cb8772b1f4f75", "tree": "91ad77823b13b805c2ee3e5915aec46872d38170", "parents": [ "d50f8f339f6901fccc9d4292b65ce8b69d7413d4" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Fri Jan 08 12:43:29 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:07 2010 +0100" }, "message": "mfd: Add subdevs in max8925\n\nAdd subdevs in MAX8925. MAX8925 includes regulator, backlight and touch\ncomponents.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "d50f8f339f6901fccc9d4292b65ce8b69d7413d4", "tree": "da0256c7151f96177209c392c49e1a9b058f2f23", "parents": [ "34a4b2391e9fbd12de9817de4ae409528bd7d7b6" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Fri Jan 08 12:29:23 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:06 2010 +0100" }, "message": "mfd: Initial max8925 support\n\nBasic Max8925 support, which is a power management IC from Maxim\nSemiconductor.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "34a4b2391e9fbd12de9817de4ae409528bd7d7b6", "tree": "fc82cd2d7985a84eec048b1895ed5f354d55759e", "parents": [ "866a98ae6e1a9768cd25fe1185481569c7e4b4a9" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Thu Dec 10 06:06:17 2009 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:06 2010 +0100" }, "message": "regulator: Unsupport 88pm8607 A0 and A1\n\nRemove the support 88PM8607 A0/A1 stepping. There\u0027s some register\ndefinition changes in B0 stepping. It can make software more efficient.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "866a98ae6e1a9768cd25fe1185481569c7e4b4a9", "tree": "556946494565bfa93bfd0901c3caa72dcb46883e", "parents": [ "0a2f915b405ac1a8d19d9b7cf7873f26ba682a24" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Tue Dec 15 16:06:17 2009 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:05 2010 +0100" }, "message": "input: Enable touch on 88pm860x\n\nEnable touchscreen driver for the 88pm860x multi function core.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "0a2f915b405ac1a8d19d9b7cf7873f26ba682a24", "tree": "a879be7f4611811ea052cfe2f176c8d2de75c187", "parents": [ "d07e8bf83fd71567aaf9c27c3b133ab3cf8f3c4c" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Wed Jan 06 17:10:09 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:05 2010 +0100" }, "message": "led: Enable led in 88pm860x\n\nEnable led sub device in Marvell 88PM860x. Two LED arrays can be supported.\nEach LED array can be used for R,G,B leds.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "d07e8bf83fd71567aaf9c27c3b133ab3cf8f3c4c", "tree": "bee15dd7e54f3d391d9d29dcd7182eea32615d2b", "parents": [ "a16122bcacf050e7f83015183053cf799713cc37" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Mon Nov 09 12:41:07 2009 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:04 2010 +0100" }, "message": "backlight: Enable backlight in 88pm860x\n\nAt most, three backlight device can be supported in 88pm860x driver.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "a16122bcacf050e7f83015183053cf799713cc37", "tree": "ecbeff86882200fc32d787388cd7aa902bf61505", "parents": [ "5c42e8c4a9c86ea26ed4ecb732a842dea0dfb6b6" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Tue Dec 15 16:04:36 2009 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:04 2010 +0100" }, "message": "mfd: Append subdev into 88pm860x driver\n\nAppend backlight, led \u0026 touch subdevs into 88pm860x driver.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "5c42e8c4a9c86ea26ed4ecb732a842dea0dfb6b6", "tree": "ffac1c091a0bedde01c802123e7a602945fd6f62", "parents": [ "2cc50bee9934deb6dfe32929a4c1742cf83d6db3" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Tue Dec 15 16:01:47 2009 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:03 2010 +0100" }, "message": "mfd: Add irq support in 88pm860x\n\n88PM860x is a complex PMIC device. It contains touch, charger, sound, rtc,\nbacklight, led, and so on.\n\nHost communicates to 88PM860x by I2C bus. Use thread irq to support this\nusage case.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "2cc50bee9934deb6dfe32929a4c1742cf83d6db3", "tree": "4959a9d010596c314aa92b13008a18ef0dc6b6fd", "parents": [ "53dbab7af9ca13fa95605e9a5c31bb803dcba363" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Wed Jan 06 17:07:13 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:02 2010 +0100" }, "message": "mfd: Rename 88pm8607 to 88pm860x in mfd\n\nRename 88PM8607 to 88PM860X in both Makefile and Kconfig under mfd directory.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "53dbab7af9ca13fa95605e9a5c31bb803dcba363", "tree": "652214fb5b3cee8195e253e56314b913ed78cf88", "parents": [ "bbd51b1ff1bf57b9ed7f062486a415509968d4d9" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Fri Jan 08 06:01:24 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:01 2010 +0100" }, "message": "mfd: Support 88pm8606 in 860x driver\n\n88PM8606 and 88PM8607 are two discrete chips used for power management.\nHardware designer can use them together or only one of them according to\nrequirement.\n\nThere\u0027s some logic tightly linked between these two chips. For example, USB\ncharger driver needs to access both chips by I2C interface.\n\nNow share one driver to these two devices. Only one I2C client is identified\nin platform init data. If another chip is also used, user should mark it in\ncompanion_addr field of platform init data. Then driver could create another\nI2C client for the companion chip.\n\nAll I2C operations are accessed by 860x-i2c driver. In order to support both\nI2C client address, the read/write API is changed in below.\n\nreg_read(client, offset)\nreg_write(client, offset, data)\n\nThe benefit is that client drivers only need one kind of read/write API. I2C\nand MFD driver can be shared in both 8606 and 8607.\n\nSince API is changed, update API in 8607 regulator driver.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "bbd51b1ff1bf57b9ed7f062486a415509968d4d9", "tree": "a7a4270a34b8f3fa0661af088b139c8d9d8314d5", "parents": [ "0df883df8e8aea79b501f6262b595e66dec175dc" ], "author": { "name": "Haojian Zhuang", "email": "haojian.zhuang@marvell.com", "time": "Wed Jan 06 17:04:18 2010 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:01 2010 +0100" }, "message": "mfd: Split 88pm8607 driver\n\nCreate 88pm8607-i2c driver to support all I2C operation of 88PM8607.\n\nSigned-off-by: Haojian Zhuang \u003chaojian.zhuang@marvell.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "0df883df8e8aea79b501f6262b595e66dec175dc", "tree": "4b63d615304b2c7c00f2ca3433b83cb9d28d6bfc", "parents": [ "38f6ce45f0bca04ac653c57cacd375c469995321" ], "author": { "name": "Linus Walleij", "email": "linus.walleij@stericsson.com", "time": "Fri Jan 08 10:44:16 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:17:00 2010 +0100" }, "message": "mfd: Convert AB3100 driver to threaded IRQ\n\nThis converts the AB3100 core MFD driver to use a threaded\ninterrupt handler instead of the explicit top/bottom-half\nconstruction with a workqueue. This saves some code and make it\nmore similar to other modern MFD drivers.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "38f6ce45f0bca04ac653c57cacd375c469995321", "tree": "b49c7f0a021b3b4b9cb274a4e74879b8f59fb081", "parents": [ "59f25070df0325067d7916b467ad15725657fedc" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Thu Jan 07 16:10:08 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:59 2010 +0100" }, "message": "gpiolib: Add support for WM8350 GPIO controller\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "59f25070df0325067d7916b467ad15725657fedc", "tree": "7cd89ed390a6ddd464aa7baec14e08f3ac541b1e", "parents": [ "ecf926bcda5ba1da7269dcaa71a1b6920dc48349" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed Jan 06 19:24:25 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:58 2010 +0100" }, "message": "mfd: Update WM8350 drivers for changed interrupt numbers\n\nThe headphone detect and charger are using the IRQ numbers so need\nto take account of irq_base with the genirq conversion. I obviously\npicked the wrong system for initial testing.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ecf926bcda5ba1da7269dcaa71a1b6920dc48349", "tree": "786f4af5b6e16b7d7157c0e147f0d7cdf0e4e79d", "parents": [ "760e4518788df6762700e6bb9dd8692379f11168" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jan 05 20:40:47 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:58 2010 +0100" }, "message": "mfd: Don\u0027t allow WM8350 to be built modular\n\nThe genirq implementation does not allow modules to implement irq_chips\nso the conversion of WM8350 to genirq means we can no longer allow the\ndriver to be built as a module.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "760e4518788df6762700e6bb9dd8692379f11168", "tree": "d4fa27366ec331e9b120b4c5e3b8d62610c2b36a", "parents": [ "29c71b138c83c8191f1f7e46fcc28b9d6bc8a5dd" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jan 05 13:59:09 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:57 2010 +0100" }, "message": "mfd: Convert WM8350 to genirq\n\nThis gives us use of the diagnostic facilities genirq provides and\nwill allow implementation of interrupt support for the WM8350 GPIOs.\nStub functions are provided to ease the transition of the individual\ndrivers, probably after additional work to pass the IRQ numbers via\nthe struct devices.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "29c71b138c83c8191f1f7e46fcc28b9d6bc8a5dd", "tree": "75f836772ba015d263a0174718701fc5cd9aa784", "parents": [ "f99344fc69c3df46786a39ea4283a4175ea40b3f" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jan 05 13:59:08 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:56 2010 +0100" }, "message": "rtc: Suppress duplicate enable/disable of WM8350 update interrupt\n\nUnlike the wm8350-custom code genirq nests enable and disable calls\nso we can\u0027t just unconditionally mask or unmask the interrupt,\nwe need to remember the state we set and only mask or unmask when\nthere is a real change.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: rtc-linux@googlegroups.com\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "f99344fc69c3df46786a39ea4283a4175ea40b3f", "tree": "72a3b44540da44d3b42de9b310f758ab50468d6e", "parents": [ "0e820ab60118e06db62ef4e55b6dd96db807a34e" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jan 05 13:59:07 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:56 2010 +0100" }, "message": "mfd: Add a data argument to the WM8350 IRQ free function\n\nTo better match genirq.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "0e820ab60118e06db62ef4e55b6dd96db807a34e", "tree": "b2714e30224746ceea6d4e84acf9d8a33b09d300", "parents": [ "1ecc09e765d3ae16ef42a4d454836d9ed804fd18" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Tue Dec 22 21:31:43 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:55 2010 +0100" }, "message": "mfd: Correct use after free for t7l66xb\n\nThe structure t7l66xb should not be freed before the subsequent references\nto its fields in the arguments to clk_put. Furthermore, this structure is\nallocated near the beginning of the function, and a goto to the label\nerr_noirq appears after a successful allocation, so it would seem that the\nkfree should be moved down below this label.\n\nA simplified version of the semantic match that finds this problem is as\nfollows: (http://coccinelle.lip6.fr/)\n\n// \u003csmpl\u003e\n@@\nexpression x,e;\nidentifier f;\niterator I;\nstatement S;\n@@\n\n*kfree(x);\n... when !\u003d \u0026x\n when !\u003d x \u003d e\n when !\u003d I(x,...) S\n*x-\u003ef\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\n" }, { "commit": "1ecc09e765d3ae16ef42a4d454836d9ed804fd18", "tree": "17d85d993ad2b917c40b09d1629606a3e7ca0eeb", "parents": [ "c02e6a5ff43d24d73cf7830c2925e213fc72e037" ], "author": { "name": "H Hartley Sweeten", "email": "hartleys@visionengravers.com", "time": "Tue Jan 05 20:01:16 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:54 2010 +0100" }, "message": "mfd: Use resouce_size for tc6393xb\n\nUse resource_size() for ioremap.\n\nSigned-off-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nCc: Ian Molton \u003cian@mnementh.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "c02e6a5ff43d24d73cf7830c2925e213fc72e037", "tree": "fd14b5042769a6823b7b9ca108aebfc97e75b0d6", "parents": [ "311e54c07e784fe63d421f724dcc597d1f82ccad" ], "author": { "name": "H Hartley Sweeten", "email": "hartleys@visionengravers.com", "time": "Tue Jan 05 19:58:34 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:53 2010 +0100" }, "message": "mfd: Use resource_size() for t7l66xb\n\nUse resource_size() for ioremap.\n\nSigned-off-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nCc: Ian Molton \u003cian@mnementh.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "311e54c07e784fe63d421f724dcc597d1f82ccad", "tree": "efcf5179a18bc9082930386a4a022974b9f54b47", "parents": [ "08b8499bdd26822df16f962db88215d02e40850a" ], "author": { "name": "H Hartley Sweeten", "email": "hartleys@visionengravers.com", "time": "Tue Jan 05 19:55:54 2010 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Sun Mar 07 22:16:52 2010 +0100" }, "message": "mfd: Use resource_size() in sm501\n\nThe requested memory region is smaller than the actual ioremap().\nUse resource_size() to get the correct size.\n\nSigned-off-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nCc: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "08b8499bdd26822df16f962db88215d02e40850a", "tree": "3a88a0f1a425637d0f5a8e68ec3419fc5f1bdb9b", "parents": [ "3ceb85ae35421c5bc560c7af8d0dd1c73d071ad0", "fb4635932a4e19c2f55383f968a0e9b64da37354" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Mar 07 12:52:38 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Mar 07 12:52:38 2010 -0800" }, "message": "Merge branch \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq\n\n* \u0027next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:\n [CPUFREQ] Fix cast warning in pcc driver.\n [CPUFREQ] Processor Clocking Control interface driver\n" }, { "commit": "3ceb85ae35421c5bc560c7af8d0dd1c73d071ad0", "tree": "923f7e50928c88d0be809d26e3adc75ad4892cdd", "parents": [ "b8fa05719ba4349be80ce929237249b57886a203" ], "author": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Sun Mar 07 12:37:17 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Mar 07 12:51:52 2010 -0800" }, "message": "USB: remove unused defintion of struct usb_device_status\n\nThe recent rework of /proc/bus/usb/devices polling support made\nthis structure unused so let\u0027s remove it.\n\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b8fa05719ba4349be80ce929237249b57886a203", "tree": "eb2a58ce09dc699e29e15b812f06196587aa64a3", "parents": [ "4da0b66c6e9ea7ba78a19f9f186779826d89f8b0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Mar 07 09:54:44 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Mar 07 09:54:44 2010 -0800" }, "message": "Revert \"lib: build list_sort() only if needed\"\n\nThis reverts commit a069c266ae5fdfbf5b4aecf2c672413aa33b2504.\n\nIt turns ou that not only was it missing a case (XFS) that needed it,\nbut perhaps more importantly, people sometimes want to enable new\nmodules that they hadn\u0027t had enabled before, and if such a module uses\nlist_sort(), it can\u0027t easily be inserted any more.\n\nSo rather than add a \"select LIST_SORT\" to the XFS case, just leave it\ncompiled in. It\u0027s not all _that_ big, after all, and the inconvenience\nisn\u0027t worth it.\n\nRequested-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCc: Christoph Hellwig \u003chch@infradead.org\u003e\nCc: Don Mullis \u003cdon.mullis@gmail.com\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: Dave Chinner \u003cdavid@fromorbit.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4da0b66c6e9ea7ba78a19f9f186779826d89f8b0", "tree": "467fe1886f35dd199a7ba8b95ed5a06e2bfe83f3", "parents": [ "b89dc5d6b0981c1096ccffbf8f4413c7bb1bcc0a" ], "author": { "name": "Bjorn Helgaas", "email": "bjorn.helgaas@hp.com", "time": "Fri Mar 05 10:47:37 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 17:53:07 2010 -0800" }, "message": "vsprintf: move %pR resource printf_specs off the stack\n\nThis adds separate I/O and memory specs, so we don\u0027t have to change the\nfield width in a shared spec, which then lets us make all the specs const\nand static, since they never change.\n\nSigned-off-by: Bjorn Helgaas \u003cbjorn.helgaas@hp.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b89dc5d6b0981c1096ccffbf8f4413c7bb1bcc0a", "tree": "e6b760aa88d858d324423ac35910439b5718f0a6", "parents": [ "ef0658f3de484bf9b173639cd47544584e01efa5" ], "author": { "name": "Bjorn Helgaas", "email": "bjorn.helgaas@hp.com", "time": "Fri Mar 05 10:47:31 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 17:53:07 2010 -0800" }, "message": "vsprintf: clarify comments for printf_spec flags\n\nAdd clues about what the SMALL and SPECIAL flags do.\n\nSigned-off-by: Bjorn Helgaas \u003cbjorn.helgaas@hp.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ef0658f3de484bf9b173639cd47544584e01efa5", "tree": "d9d6c569b2c79fb9cf240783a409722cc9264886", "parents": [ "7bc80cd935a4d5fd8574f6994bd95d0aad273d56" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Sat Mar 06 17:10:14 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 17:47:45 2010 -0800" }, "message": "vsprintf.c: Reduce sizeof struct printf_spec from 24 to 8 bytes\n\nReducing the size of struct printf_spec is a good thing because multiple\ninstances are commonly passed on stack.\n\nIt\u0027s possible for type to be u8 and field_width to be s8, but this is\nlikely small enough for now.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7bc80cd935a4d5fd8574f6994bd95d0aad273d56", "tree": "8251afeab690b2f2d81bc403fef224160fc83bc6", "parents": [ "66b89159c25a47d2177743526c61b5ada7acc39e" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 16:34:34 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 16:34:34 2010 -0800" }, "message": "usbfs: fix deadlock on \u0027usbfs_mutex\u0027, clean up poll\n\nThe caller of usbfs_conn_disc_event() in some cases (but not always)\nalready holds usbfs_mutex, so trying to protect the event counter with\nthat lock causes nasty deadlocks.\n\nThe problem was introduced by commit 554f76962d (\"USB: Remove BKL from\npoll()\") when the BLK protection was turned into using the mutex instead.\n\nSo fix this by using an atomic variable instead. And while we\u0027re at it,\nget rid of the atrocious naming of said variable and the waitqueue it is\nassociated with.\n\nThis also cleans up the unnecessary locking in the poll routine, since\nthe whole point of how the pollwait table works is that you can just add\nyourself to the waiting list, and then check the condition you\u0027re\nwaiting for afterwards - avoiding all races.\n\nIt also gets rid of the unnecessary dynamic allocation of the device\nstatus that just contained a single word. We should use f_version for\nthis, as Dmitry Torokhov points out. That simplifies everything\nfurther.\n\nReported-and-tested-by: Jeff Chua \u003cjeff.chua.linux@gmail.com\u003e\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nAcked-by: Alan Stern \u003cstern@rowland.harvard.edu\u003e\nCc: Oliver Neukum \u003coliver@neukum.org\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "66b89159c25a47d2177743526c61b5ada7acc39e", "tree": "b092b859ca01d7544a666c95f940144b0ef3b35b", "parents": [ "87c7ae06cc50bcbcdcc60d64a959ca0b9b71f892", "c2f843f03d658e9ab2a1a455f2c1851fd6a869af" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 13:18:03 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 13:18:03 2010 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:\n [LogFS] Change magic number\n [LogFS] Remove h_version field\n [LogFS] Check feature flags\n [LogFS] Only write journal if dirty\n [LogFS] Fix bdev erases\n [LogFS] Silence gcc\n [LogFS] Prevent 64bit divisions in hash_index\n [LogFS] Plug memory leak on error paths\n [LogFS] Add MAINTAINERS entry\n [LogFS] add new flash file system\n\nFixed up trivial conflict in lib/Kconfig, and a semantic conflict in\nfs/logfs/inode.c introduced by write_inode() being changed to use\nwriteback_control\u0027 by commit a9185b41a4f84971b930c519f0c63bd450c4810d\n(\"pass writeback_control to -\u003ewrite_inode\")\n" }, { "commit": "87c7ae06cc50bcbcdcc60d64a959ca0b9b71f892", "tree": "14753708a10c8bf65517056cd3fc87a22a03eda9", "parents": [ "dff6d1c5ef9116a4478908001d72ee67127ecf01", "f070304094edb8d516423e79edd27c97ec2020b0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:34:04 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:34:04 2010 -0800" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:\n dm raid1: fix deadlock when suspending failed device\n dm: eliminate some holes data structures\n dm ioctl: introduce flag indicating uevent was generated\n dm: free dm_io before bio_endio not after\n dm table: remove unused dm_get_device range parameters\n dm ioctl: only issue uevent on resume if state changed\n dm raid1: always return error if all legs fail\n dm mpath: refactor pg_init\n dm mpath: wait for pg_init completion when suspending\n dm mpath: hold io until all pg_inits completed\n dm mpath: avoid storing private suspended state\n dm: document when snapshot has finished merging\n dm table: remove dm_get from dm_table_get_md\n dm mpath: skip activate_path for failed paths\n dm mpath: pass struct pgpath to pg init done\n" }, { "commit": "dff6d1c5ef9116a4478908001d72ee67127ecf01", "tree": "43c6e7ff8e8059f8fd733efd45b51f84b510d305", "parents": [ "66ce3cf84deba6cc71dcf43c9d56a4278e5f712d", "a0a5e3488a51c46f383c5faa86b53828e30ce153" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:33:09 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:33:09 2010 -0800" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)\n hwmon: Remove the deprecated adt7473 driver\n hwmon: Fix off-by-one kind values\n hwmon: (tmp421) Fix temperature conversions\n hwmon: (tmp421) Restore missing inputs\n hwmon: Driver for Andigilog aSC7621 family monitoring chips\n hwmon: (adt7411) Improve locking\n hwmon: Add driver for ADT7411 voltage and temperature sensor\n hwmon: (w83793) Add watchdog functionality\n hwmon: (g760a) Make rpm_from_cnt static\n hwmon: (it87) Validate auto pwm settings\n hwmon: (it87) Add support for old automatic fan speed control\n hwmon: (it87) Drop dead web links in documentation\n hwmon: (it87) Add an entry in MAINTAINERS\n hwmon: (it87) Use strict_strtol instead of simple_strtol\n hwmon: (it87) Fix many checkpatch errors and warnings\n hwmon: (it87) Add support for beep on alarm\n hwmon: (it87) Create vid attributes by group\n hwmon: (it87) Refactor attributes creation and removal\n hwmon: (it87) Expose the PWM/temperature mappings\n hwmon: (it87) Display fan outputs in automatic mode as such\n ...\n" }, { "commit": "66ce3cf84deba6cc71dcf43c9d56a4278e5f712d", "tree": "7580bcc42fc7c52620b98d78ebdc654bd7ed83ea", "parents": [ "05c5cb31ec47cacf38db56d9efaa37ca9d473132", "9b1f56d60acfd634728f91f34922066c6f80ede6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:32:21 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:32:21 2010 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://oss.sgi.com/xfs/xfs\n\n* \u0027for-linus\u0027 of git://oss.sgi.com/xfs/xfs: (21 commits)\n xfs: return inode fork offset in bulkstat for fsr\n xfs: Increase the default size of the reserved blocks pool\n xfs: truncate delalloc extents when IO fails in writeback\n xfs: check for more work before sleeping in xfssyncd\n xfs: Fix a build warning in xfs_aops.c\n xfs: fix locking for inode cache radix tree tag updates\n xfs: remove xfs_ipin/xfs_iunpin\n xfs: cleanup xfs_iunpin_wait/xfs_iunpin_nowait\n xfs: kill xfs_lrw.h\n xfs: factor common xfs_trans_bjoin code\n xfs: stop passing opaque handles to xfs_log.c routines\n xfs: split xfs_bmap_btalloc\n xfs: fix xfs_fsblock_t tracing\n xfs: fix inode pincount check in fsync\n xfs: Non-blocking inode locking in IO completion\n xfs: implement optimized fdatasync\n xfs: remove wrapper for the fsync file operation\n xfs: remove wrappers for read/write file operations\n xfs: merge xfs_lrw.c into xfs_file.c\n xfs: fix dquota trace format\n ...\n" }, { "commit": "05c5cb31ec47cacf38db56d9efaa37ca9d473132", "tree": "03f900679819abd8700d5ea93c22e3a59d3af7ca", "parents": [ "4582a30c2fdca5d2b40f63a20ea082b93230ff2b", "4ea41e2de5bba756858bb40f964e3490b6d1a25c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:31:38 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:31:38 2010 -0800" }, "message": "Merge branch \u0027for-2.6.34\u0027 of git://linux-nfs.org/~bfields/linux\n\n* \u0027for-2.6.34\u0027 of git://linux-nfs.org/~bfields/linux: (22 commits)\n nfsd4: fix minor memory leak\n svcrpc: treat uid\u0027s as unsigned\n nfsd: ensure sockets are closed on error\n Revert \"sunrpc: move the close processing after do recvfrom method\"\n Revert \"sunrpc: fix peername failed on closed listener\"\n sunrpc: remove unnecessary svc_xprt_put\n NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN\n xfs_export_operations.commit_metadata\n commit_metadata export operation replacing nfsd_sync_dir\n lockd: don\u0027t clear sm_monitored on nsm_reboot_lookup\n lockd: release reference to nsm_handle in nlm_host_rebooted\n nfsd: Use vfs_fsync_range() in nfsd_commit\n NFSD: Create PF_INET6 listener in write_ports\n SUNRPC: NFS kernel APIs shouldn\u0027t return ENOENT for \"transport not found\"\n SUNRPC: Bury \"#ifdef IPV6\" in svc_create_xprt()\n NFSD: Support AF_INET6 in svc_addsock() function\n SUNRPC: Use rpc_pton() in ip_map_parse()\n nfsd: 4.1 has an rfc number\n nfsd41: Create the recovery entry for the NFSv4.1 client\n nfsd: use vfs_fsync for non-directories\n ...\n" }, { "commit": "4582a30c2fdca5d2b40f63a20ea082b93230ff2b", "tree": "59b00fb987c806cdf8164ae07ff229f156a210d8", "parents": [ "9cc0cb3c7d54f320b9eede6f4a49072ecadd864d", "6e9065d756df5dac6dc02b94b82b4f5dbbf38caf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:30:18 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:30:18 2010 -0800" }, "message": "Merge git://git.infradead.org/ubi-2.6\n\n* git://git.infradead.org/ubi-2.6:\n UBI: add write checking\n UBI: simplify debugging return codes\n UBI: fix attaching error path\n UBI: support attaching by MTD character device name\n UBI: mark few variables as __initdata\n" }, { "commit": "9cc0cb3c7d54f320b9eede6f4a49072ecadd864d", "tree": "4de2d427038a5450caeed1a9b1508587d328a6c9", "parents": [ "a8a5164c297c16c2f4be776714ca47dba252cc3d" ], "author": { "name": "Denis Turischev", "email": "denis@compulab.co.il", "time": "Fri Mar 05 13:44:39 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "gpio: introduce it8761e_gpio driver for IT8761E Super I/O chip\n\nSigned-off-by: Denis Turischev \u003cdenis@compulab.co.il\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a8a5164c297c16c2f4be776714ca47dba252cc3d", "tree": "03a3d1a4692d31a22a55cdce48c7edcf66394843", "parents": [ "89ea8bbe9c3eb2ea0cb57a4ecf283cab7326f0b0" ], "author": { "name": "Ben Gardner", "email": "gardner.ben@gmail.com", "time": "Fri Mar 05 13:44:38 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "gpio: cs5535-gpio: fix input direction\n\nThe cs5535-gpio driver\u0027s get() function was returning the output value.\nThis means that the GPIO pins would never work as an input, even if\nconfigured as an input.\n\nThe driver should return the READ_BACK value, which is the sensed line\nvalue. To make that work when the direction is \u0027output\u0027, INPUT_ENABLE\nneeds to be set.\n\nIn addition, the driver was not disabling OUTPUT_ENABLE when the direction\nis set to \u0027input\u0027. That would cause the GPIO to continue to drive the pin\nif the direction was ever set to output.\n\nThis issue was noticed when attempting to use the gpiolib driver to read\nan external input. I had previously been using the char/cs5535-gpio\ndriver.\n\nSigned-off-by: Ben Gardner \u003cgardner.ben@gmail.com\u003e\nAcked-by: Andres Salomon \u003cdilinger@collabora.co.uk\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nCc: \u003cstable@kernel.org\u003e\t\t[2.6.33.x]\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "89ea8bbe9c3eb2ea0cb57a4ecf283cab7326f0b0", "tree": "f06f9594be6e64699ae3d8672d4868b81e25cfa7", "parents": [ "8c35c89aa3d7e0f253c3a10456a8b075288b4565" ], "author": { "name": "Marc Zyngier", "email": "maz@misterjones.org", "time": "Fri Mar 05 13:44:36 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "gpio: pca953x.c: add interrupt handling capability\n\nMost of the GPIO expanders controlled by the pca953x driver are able to\nreport changes on the input pins through an *INT pin.\n\nThis patch implements the irq_chip functionality (edge detection only).\n\nThe driver has been tested on an Arcom Zeus.\n\n[akpm@linux-foundation.org: the compiler does inlining for us nowadays]\nSigned-off-by: Marc Zyngier \u003cmaz@misterjones.org\u003e\nCc: Eric Miao \u003ceric.y.miao@gmail.com\u003e\nCc: Haojian Zhuang \u003chaojian.zhuang@gmail.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Nate Case \u003cncase@xes-inc.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "8c35c89aa3d7e0f253c3a10456a8b075288b4565", "tree": "571fa92195a23fbd6cab7de7cba099aa69da7269", "parents": [ "3e45f1d1155894e6f4291f5536b224874d52d8e2" ], "author": { "name": "Richard Röjfors", "email": "richard.rojfors@pelagicore.com", "time": "Fri Mar 05 13:44:35 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "timbgpio: add support for interrupt triggering on both flanks\n\nIntroduce support for triggering interrupts on both rising and falling\nedge.\n\nThis feature requires version 3 or newer of the IP, a version check is\ndone when triggering on both edges is requested.\n\nSigned-off-by: Richard Röjfors \u003crichard.rojfors@pelagicore.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "3e45f1d1155894e6f4291f5536b224874d52d8e2", "tree": "d7b44dd5248bdb053c0cd6632e82ce8893833519", "parents": [ "62fecb70cfaa9b4c6aa1981acd53b18f4ad925f0" ], "author": { "name": "Eric Miao", "email": "eric.y.miao@gmail.com", "time": "Fri Mar 05 13:44:35 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "gpio: introduce gpio_request_one() and friends\n\ngpio_request() without initial configuration of the GPIO is normally\nuseless, introduce gpio_request_one() together with GPIOF_ flags for\ninput/output direction and initial output level.\n\ngpio_{request,free}_array() for multiple GPIOs.\n\nSigned-off-by: Eric Miao \u003ceric.y.miao@gmail.com\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Ben Nizette \u003cbn@niasdigital.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "62fecb70cfaa9b4c6aa1981acd53b18f4ad925f0", "tree": "a74c1d96c9af8d9602e6ab85bf9b2ef6429ba92b", "parents": [ "e952805d2d2e706aed182723e5ab3ec0b1f91de3" ], "author": { "name": "Olof Johansson", "email": "olof@lixom.net", "time": "Fri Mar 05 13:44:34 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "pca953x: minor include cleanup\n\nlinux/i2c/pca953x.h is a very bare include file. Fix check for multiple\nincludes of linux/i2c/pca953x.h, and add dependent includes into the\nheader file.\n\nSigned-off-by: Olof Johansson \u003colof@lixom.net\u003e\nAcked-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e952805d2d2e706aed182723e5ab3ec0b1f91de3", "tree": "5b4f9bfff6798f44fdea7c891ee911af2df5357b", "parents": [ "5a98c04d78c896d52baef20ffc11f6d1ba6eb786" ], "author": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Fri Mar 05 13:44:33 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "gpio: add driver for MAX7300 I2C GPIO extender\n\nAdd the MAX7300-I2C variant of the MAX7301-SPI version. Both chips share\nthe same core logic, so the generic part of the in-kernel SPI-driver is\nrefactored into a generic part. The I2C and SPI specific funtions are\nthen wrapped into seperate drivers picking up the generic part.\n\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\nCc: Juergen Beisert \u003cj.beisert@pengutronix.de\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "5a98c04d78c896d52baef20ffc11f6d1ba6eb786", "tree": "e4ce58fdd2b0b3bbd6c4a6c5a8c40209db00d83d", "parents": [ "9407351d7cce01a9ada942f00201e92e2541d9cb" ], "author": { "name": "James Hogan", "email": "james@albanarts.com", "time": "Fri Mar 05 13:44:31 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:48 2010 -0800" }, "message": "rtc-coh901331: fix braces in resume code\n\nThe else part of the if statement is indented but does not have braces\naround it. It clearly should since it uses clk_enable and clk_disable\nwhich are supposed to balance.\n\nSigned-off-by: James Hogan \u003cjames@albanarts.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: \u003cstable@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9407351d7cce01a9ada942f00201e92e2541d9cb", "tree": "f6b6b7b5bc2b8662a117fe36ad7f6fa8f18cf345", "parents": [ "4c014e872e02baa5b0bde38b2b2867ccf1f9df76" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Fri Mar 05 13:44:30 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc/mc13783: implement alarm\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nCc: Valentin Longchamp \u003cvalentin.longchamp@epfl.ch\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nCc: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4c014e872e02baa5b0bde38b2b2867ccf1f9df76", "tree": "b9e6315145e8c50b684ce532696a2082c90a987a", "parents": [ "86c3400810a7a33e176bf33b6b074d881e829374" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Fri Mar 05 13:44:30 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc/mc13783: protect rtc {,un}registration by mc13783 lock\n\nThis is to protect from interrupt handlers using an unregistered rtc\ndevice.\n\nTo assert that the reset irq is considered now before the rtc is\nregistered the corresponding status is checked before.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nCc: Valentin Longchamp \u003cvalentin.longchamp@epfl.ch\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nCc: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "86c3400810a7a33e176bf33b6b074d881e829374", "tree": "4342159d7e552078151c5a87a72cd29c5a4aabd8", "parents": [ "4dd4dd655cedb7c5c0bf45bc1d012ebbe21e8319" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Fri Mar 05 13:44:29 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "mfd/mc13783: new function reading irq mask and status register\n\nThe driver for the mc13783 rtc needs to know if the TODA irq is pending.\n\nInstead of tracking in the rtc driver if the irq is enabled provide that\ninformation, too.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nCc: Valentin Longchamp \u003cvalentin.longchamp@epfl.ch\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nCc: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4dd4dd655cedb7c5c0bf45bc1d012ebbe21e8319", "tree": "1eacde57ca86d1337faf65cb4e527c79ad40049d", "parents": [ "2a83319182afe9ba7d958180b3bd3a32a9e3d1be" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Fri Mar 05 13:44:28 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc/mc13783: don\u0027t use deprecated mc13783 API calls\n\nmc13783_ackirq, mc13783_unmask and mc13783_mask are deprecated, use the\ndrop in replacements with the nicer names.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nCc: Valentin Longchamp \u003cvalentin.longchamp@epfl.ch\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nCc: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2a83319182afe9ba7d958180b3bd3a32a9e3d1be", "tree": "14ee3aa6f0e8534fdbbf7ec81f5af048b7abbc17", "parents": [ "57205026da070b59e9546df352fe465f1aeacf99" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Fri Mar 05 13:44:26 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "input/mc13783-ts: don\u0027t use deprecated mc13783 API calls\n\nmc13783_ackirq is deprecated, use the drop in replacement mc13783_irq_ack.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nCc: Valentin Longchamp \u003cvalentin.longchamp@epfl.ch\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nCc: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "57205026da070b59e9546df352fe465f1aeacf99", "tree": "ff2730cd37ba499324dba013fb82f579ea0e3530", "parents": [ "2a7a06a0cdd86d572e91657603180da5992be6d3" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Fri Mar 05 13:44:25 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "mc13783: rename mc13783_{{un,}mask,ack_irq} to have a mc13783_irq prefix\n\nIn the source file group these functions together.\n\nThe mc13783 header file provides fallback implementations for the old\nnames to prevent build failures. When all users of the old names are\nfixed to use the new names these can go away.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nCc: Valentin Longchamp \u003cvalentin.longchamp@epfl.ch\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nCc: Luotao Fu \u003cl.fu@pengutronix.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2a7a06a0cdd86d572e91657603180da5992be6d3", "tree": "a28063efd5886e95171a7e983e8b63c6e2b2db73", "parents": [ "2e84067b6e557b0b85cdbceaf9a9189fc2c26536" ], "author": { "name": "Aaro Koskinen", "email": "aaro.koskinen@nokia.com", "time": "Fri Mar 05 13:44:24 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc-core: fix memory leak\n\nThe idr should be destroyed when the module is unloaded. Found with\nkmemleak.\n\nSigned-off-by: Aaro Koskinen \u003caaro.koskinen@nokia.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: stable \u003cstable@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2e84067b6e557b0b85cdbceaf9a9189fc2c26536", "tree": "98f8170511bbb06db5483edca4315345033ffeac", "parents": [ "870a2761a8df7dea7449b4225c9babcf22c6ead4" ], "author": { "name": "Tobias Klauser", "email": "tklauser@distanz.ch", "time": "Fri Mar 05 13:44:23 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc-twl: Storage class should be before const qualifier\n\nThe C99 specification states in section 6.11.5:\n\nThe placement of a storage-class specifier other than at the beginning of\nthe declaration specifiers in a declaration is an obsolescent feature.\n\nSigned-off-by: Tobias Klauser \u003ctklauser@distanz.ch\u003e\nSigned-off-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "870a2761a8df7dea7449b4225c9babcf22c6ead4", "tree": "6cec2579973aad15acfad14f48733585be7a85f2", "parents": [ "b51e8293182764ca7b1a1bdb28a5c5dc60152c76" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Fri Mar 05 13:44:23 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc-at91sam9: Correct size given to memset\n\nMemset should be given the size of the structure, not the size of the\npointer.\n\nThe semantic patch that makes this change is as follows:\n(http://coccinelle.lip6.fr/)\n\n// \u003csmpl\u003e\n@@\ntype T;\nT *x;\nexpression E;\n@@\n\nmemset(x, E, sizeof(\n+ *\n x))\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nSigned-off-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b51e8293182764ca7b1a1bdb28a5c5dc60152c76", "tree": "e6605d80b8948291acc7f754a5641ebe87d48896", "parents": [ "b4877d2b3678f4455f2b8b0211868ac57c3b1ff6" ], "author": { "name": "Uwe Kleine-König", "email": "u.kleine-koenig@pengutronix.de", "time": "Fri Mar 05 13:44:21 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc-pcf2123: move pcf2123_remove to .devexit.text\n\nThe function pcf2123_remove is used only wrapped by __devexit_p so define\nit using __devexit.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nSigned-off-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Christian Pellegrin \u003cchripell@fsfe.org\u003e\nCc: Chris Verges \u003cchrisv@cyberswitching.com\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b4877d2b3678f4455f2b8b0211868ac57c3b1ff6", "tree": "78d93a4edc48bb76e6f0a385cf5bb2d806405229", "parents": [ "49908e739e23e2672d3efb9b1a35f877f8e86342" ], "author": { "name": "H Hartley Sweeten", "email": "hartleys@visionengravers.com", "time": "Fri Mar 05 13:44:20 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "rtc-ep93xx.c: cleanup probe/remove routines\n\nFix issue with rtc device not getting unregistered in probe error path.\n\nUse the devres managed resource functions in the probe routine to cleanup\nthe error path.\n\nUse sysfs_{create/remove}_group to add/remove the sysfs files.\n\nReduces the text size by 132 bytes, increases data by 12 bytes:\n text\t data\t bss\t dec\t hex\tfilename\n- 937\t 124\t 0\t 1061\t 425\trtc-ep93xx.o\n+ 805\t 136\t 0\t 941\t 3ad\trtc-ep93xx.o\n\nSigned-off-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nAcked-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "49908e739e23e2672d3efb9b1a35f877f8e86342", "tree": "6e86c37ce3736403c80bc4e4138116cc2e326c9a", "parents": [ "27fb7f009bdb1ff13d4e4c008a2fd36b2305055b" ], "author": { "name": "Alexander Beregalov", "email": "a.beregalov@gmail.com", "time": "Fri Mar 05 13:44:19 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "rtc: mxc: fix memory leak\n\nFree pdata before exit. Found by cppcheck.\n\n[yuasa@linux-mips.org: add missing iounmap()]\nSigned-off-by: Alexander Beregalov \u003ca.beregalov@gmail.com\u003e\nReviewed-by: WANG Cong \u003cxiyou.wangcong@gmail.com\u003e\nAcked-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc Yoichi Yuasa \u003cyuasa@linux-mips.org\u003e\nCc: Paul Gortmaker \u003cp_gortmaker@yahoo.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "27fb7f009bdb1ff13d4e4c008a2fd36b2305055b", "tree": "be1707d0e70bd2d1c8960b37a9a96f808eff016f", "parents": [ "6aed359df4d82c38145d95957b741f0b08d24074" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Fri Mar 05 13:44:18 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "xen: add kconfig menu\n\nCurrently the xen support drivers are displayed in the main Device Drivers\nmenu of the config tools instead of in their own sub-menu, so move them to\ntheir own sub-menu, like the rest of the driver world uses.\n\nThis keeps the main Device Drivers menu from becoming messy.\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nCc: Jeremy Fitzhardinge \u003cjeremy@xensource.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6aed359df4d82c38145d95957b741f0b08d24074", "tree": "899d117b7c4ab44233c4303454355b1f3069b90c", "parents": [ "a52712af5a7473b9f85d8499153f4bbfe875f942" ], "author": { "name": "Thiago Farina", "email": "tfransosi@gmail.com", "time": "Fri Mar 05 13:44:17 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "console/vgacon.c: mark file-local symbol static\n\nwarning: symbol \u0027vgacon_text_mode_force\u0027 was not declared. Should it be static?\n\nSigned-off-by: Thiago Farina \u003ctfransosi@gmail.com\u003e\nAcked-by: Matthew Garrett \u003cmjg@redhat.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a52712af5a7473b9f85d8499153f4bbfe875f942", "tree": "ca689c75666e488d57108da00a1d429305a5771b", "parents": [ "76595f79d76fbe6267a51b3a866a028d150f06d4" ], "author": { "name": "Amerigo Wang", "email": "amwang@redhat.com", "time": "Fri Mar 05 13:44:17 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "console: limit the range of VGACON_SOFT_SCROLLBACK_SIZE\n\nBuraphaLinux reported that we will trigger a mm warning when we\nCONFIG_VGACON_SOFT_SCROLLBACK_SIZE\u003d65536, this is because mm cann\u0027t\nallocate so many pages. We should limit the range of\nCONFIG_VGACON_SOFT_SCROLLBACK_SIZE, don\u0027t give a user any chance to\ntrigger that.\n\nReported-by: BuraphaLinux Server \u003cburaphalinuxserver@gmail.com\u003e\nTested-by: BuraphaLinux Server \u003cburaphalinuxserver@gmail.com\u003e\nSigned-off-by: WANG Cong \u003camwang@redhat.com\u003e\nCc: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "76595f79d76fbe6267a51b3a866a028d150f06d4", "tree": "eff36adfb339f8cb57b07fd9f09d37d982aa354e", "parents": [ "5c99cbf49a6e1a1efd25b11f4604c65c455e1612" ], "author": { "name": "Neil Horman", "email": "nhorman@tuxdriver.com", "time": "Fri Mar 05 13:44:16 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "coredump: suppress uid comparison test if core output files are pipes\n\nModify uid check in do_coredump so as to not apply it in the case of\npipes.\n\nThis just got noticed in testing. The end of do_coredump validates the\nuid of the inode for the created file against the uid of the crashing\nprocess to ensure that no one can pre-create a core file with different\nownership and grab the information contained in the core when they\nshouldn\u0027 tbe able to. This causes failures when using pipes for a core\ndumps if the crashing process is not root, which is the uid of the pipe\nwhen it is created.\n\nThe fix is simple. Since the check for matching uid\u0027s isn\u0027t relevant for\npipes (a process can\u0027t create a pipe that the uermodehelper code will open\nanyway), we can just just skip it in the event ispipe is non-zero\n\nReverts a pipe-affecting change which was accidentally made in\n\n: commit c46f739dd39db3b07ab5deb4e3ec81e1c04a91af\n: Author: Ingo Molnar \u003cmingo@elte.hu\u003e\n: AuthorDate: Wed Nov 28 13:59:18 2007 +0100\n: Commit: Linus Torvalds \u003ctorvalds@woody.linux-foundation.org\u003e\n: CommitDate: Wed Nov 28 10:58:01 2007 -0800\n:\n: vfs: coredumping fix\n\nSigned-off-by: Neil Horman \u003cnhorman@tuxdriver.com\u003e\nCc: Andi Kleen \u003candi@firstfloor.org\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "5c99cbf49a6e1a1efd25b11f4604c65c455e1612", "tree": "e2a3451cc87f83b15f23a0472339be81770e12da", "parents": [ "30736a4d43f4af7f1a7836d6a266be17082195c4" ], "author": { "name": "Oleg Nesterov", "email": "oleg@redhat.com", "time": "Fri Mar 05 13:44:14 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "coredump: set -\u003egroup_exit_code for other CLONE_VM tasks too\n\nUser visible change.\n\ndo_coredump() kills all threads which share the same -\u003emm but only the\ncoredumping process gets the proper exit_code. Other tasks which share\nthe same -\u003emm die \"silently\" and return status \u003d\u003d 0 to parent.\n\nThis is historical behaviour, not actually a bug. But I think Frank\nHeckenbach rightly dislikes the current behaviour. Simple test-case:\n\n\t#include \u003cstdio.h\u003e\n\t#include \u003cunistd.h\u003e\n\t#include \u003csignal.h\u003e\n\t#include \u003csys/wait.h\u003e\n\n\tint main(void)\n\t{\n\t\tint stat;\n\n\t\tif (!fork()) {\n\t\t\tif (!vfork())\n\t\t\t\tkill(getpid(), SIGQUIT);\n\t\t}\n\n\t\twait(\u0026stat);\n\t\tprintf(\"stat\u003d%x\\n\", stat);\n\t\treturn 0;\n\t}\n\nBefore this patch it prints \"stat\u003d0\" despite the fact the child was killed\nby SIGQUIT. After this patch the output is \"stat\u003d3\" which obviously makes\nmore sense.\n\nEven with this patch, only the task which originates the coredumping gets\n\"|\u003d 0x80\" if the core was actually dumped, but at least the coredumping\nsignal is visible to do_wait/etc.\n\nReported-by: Frank Heckenbach \u003cf.heckenbach@fh-soft.de\u003e\nSigned-off-by: Oleg Nesterov \u003coleg@redhat.com\u003e\nAcked-by: WANG Cong \u003cxiyou.wangcong@gmail.com\u003e\nCc: Roland McGrath \u003croland@redhat.com\u003e\nCc: Neil Horman \u003cnhorman@tuxdriver.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "30736a4d43f4af7f1a7836d6a266be17082195c4", "tree": "54e388cdaf4795bdb7651be03c50bba67eb0b43a", "parents": [ "8d9032bbe4671dc481261ccd4e161cd96e54b118" ], "author": { "name": "Masami Hiramatsu", "email": "mhiramat@redhat.com", "time": "Fri Mar 05 13:44:12 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "coredump: pass mm-\u003eflags as a coredump parameter for consistency\n\nPass mm-\u003eflags as a coredump parameter for consistency.\n\n ---\n1787 if (mm-\u003ecore_state || !get_dumpable(mm)) { \u003c- (1)\n1788 up_write(\u0026mm-\u003emmap_sem);\n1789 put_cred(cred);\n1790 goto fail;\n1791 }\n1792\n[...]\n1798 if (get_dumpable(mm) \u003d\u003d 2) { /* Setuid core dump mode */ \u003c-(2)\n1799 flag \u003d O_EXCL; /* Stop rewrite attacks */\n1800 cred-\u003efsuid \u003d 0; /* Dump root private */\n1801 }\n ---\n\nSince dumpable bits are not protected by lock, there is a chance to change\nthese bits between (1) and (2).\n\nTo solve this issue, this patch copies mm-\u003eflags to\ncoredump_params.mm_flags at the beginning of do_coredump() and uses it\ninstead of get_dumpable() while dumping core.\n\nThis copy is also passed to binfmt-\u003ecore_dump, since elf*_core_dump() uses\ndump_filter bits in mm-\u003eflags.\n\n[akpm@linux-foundation.org: fix merge]\nSigned-off-by: Masami Hiramatsu \u003cmhiramat@redhat.com\u003e\nAcked-by: Roland McGrath \u003croland@redhat.com\u003e\nCc: Hidehiro Kawai \u003chidehiro.kawai.ez@hitachi.com\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nReviewed-by: KOSAKI Motohiro \u003ckosaki.motohiro@jp.fujitsu.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "8d9032bbe4671dc481261ccd4e161cd96e54b118", "tree": "a31d22f488f7d6789259da68c53cb2727a925fa8", "parents": [ "93eb211e6c9ff6054fcf9c5b9e344d8d9ad29175" ], "author": { "name": "Daisuke HATAYAMA", "email": "d.hatayama@jp.fujitsu.com", "time": "Fri Mar 05 13:44:10 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "elf coredump: add extended numbering support\n\nThe current ELF dumper implementation can produce broken corefiles if\nprogram headers exceed 65535. This number is determined by the number of\nvmas which the process have. In particular, some extreme programs may use\nmore than 65535 vmas. (If you google max_map_count, you can find some\nusers facing this problem.) This kind of program never be able to generate\ncorrect coredumps.\n\nThis patch implements ``extended numbering\u0027\u0027 that uses sh_info field of\nthe first section header instead of e_phnum field in order to represent\nupto 4294967295 vmas.\n\nThis is supported by\nAMD64-ABI(http://www.x86-64.org/documentation.html) and\nSolaris(http://docs.sun.com/app/docs/doc/817-1984/).\nOf course, we are preparing patches for gdb and binutils.\n\nSigned-off-by: Daisuke HATAYAMA \u003cd.hatayama@jp.fujitsu.com\u003e\nCc: \"Luck, Tony\" \u003ctony.luck@intel.com\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nCc: Greg Ungerer \u003cgerg@snapgear.com\u003e\nCc: Roland McGrath \u003croland@redhat.com\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Alexander Viro \u003cviro@zeniv.linux.org.uk\u003e\nCc: Andi Kleen \u003candi@firstfloor.org\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "93eb211e6c9ff6054fcf9c5b9e344d8d9ad29175", "tree": "424990890a34e626df8e2c68f4952d4d4734b63b", "parents": [ "1fcccbac89f5bbc5e41aa72086960059fce372da" ], "author": { "name": "Daisuke HATAYAMA", "email": "d.hatayama@jp.fujitsu.com", "time": "Fri Mar 05 13:44:09 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:46 2010 -0800" }, "message": "elf coredump: make offset calculation process and writing process explicit\n\nBy the next patch, elf_core_dump() and elf_fdpic_core_dump() will support\nextended numbering and so will produce the corefiles with section header\ntable in a special case.\n\nThe problem is the process of writing a file header offset of the section\nheader table into e_shoff field of the ELF header. ELF header is\npositioned at the beginning of the corefile, while section header at the\nend. So, we need to take which of the following ways:\n\n 1. Seek backward to retry writing operation for ELF header\n after writing process for a whole part\n\n 2. Make offset calculation process and writing process\n totally sequential\n\nThe clause 1. is not always possible: one cannot assume that file system\nsupports seek function. Consider the no_llseek case.\n\nTherefore, this patch adopts the clause 2.\n\nSigned-off-by: Daisuke HATAYAMA \u003cd.hatayama@jp.fujitsu.com\u003e\nCc: \"Luck, Tony\" \u003ctony.luck@intel.com\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nCc: Greg Ungerer \u003cgerg@snapgear.com\u003e\nCc: Roland McGrath \u003croland@redhat.com\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Alexander Viro \u003cviro@zeniv.linux.org.uk\u003e\nCc: Andi Kleen \u003candi@firstfloor.org\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "1fcccbac89f5bbc5e41aa72086960059fce372da", "tree": "9e42ee69f0216e612e5bd4338d6203dbad2d002f", "parents": [ "088e7af73a962fcc8883b7a6392544d8342553d6" ], "author": { "name": "Daisuke HATAYAMA", "email": "d.hatayama@jp.fujitsu.com", "time": "Fri Mar 05 13:44:07 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:45 2010 -0800" }, "message": "elf coredump: replace ELF_CORE_EXTRA_* macros by functions\n\nelf_core_dump() and elf_fdpic_core_dump() use #ifdef and the corresponding\nmacro for hiding _multiline_ logics in functions. This patch removes\n#ifdef and replaces ELF_CORE_EXTRA_* by corresponding functions. For\narchitectures not implemeonting ELF_CORE_EXTRA_*, we use weak functions in\norder to reduce a range of modification.\n\nThis cleanup is for my next patches, but I think this cleanup itself is\nworth doing regardless of my firnal purpose.\n\nSigned-off-by: Daisuke HATAYAMA \u003cd.hatayama@jp.fujitsu.com\u003e\nCc: \"Luck, Tony\" \u003ctony.luck@intel.com\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nCc: Greg Ungerer \u003cgerg@snapgear.com\u003e\nCc: Roland McGrath \u003croland@redhat.com\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Alexander Viro \u003cviro@zeniv.linux.org.uk\u003e\nCc: Andi Kleen \u003candi@firstfloor.org\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "088e7af73a962fcc8883b7a6392544d8342553d6", "tree": "5dce5b991cad1071522b464bd83943a1b6e885b2", "parents": [ "05f47fda9fc5b17bfab189e9d54228025befc996" ], "author": { "name": "Daisuke HATAYAMA", "email": "d.hatayama@jp.fujitsu.com", "time": "Fri Mar 05 13:44:06 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:45 2010 -0800" }, "message": "coredump: move dump_write() and dump_seek() into a header file\n\nMy next patch will replace ELF_CORE_EXTRA_* macros by functions, putting\nthem into other newly created *.c files. Then, each files will contain\ndump_write(), where each pair of binfmt_*.c and elfcore.c should be the\nsame. So, this patch moves them into a header file with dump_seek().\nAlso, the patch deletes confusing DUMP_WRITE macros in each files.\n\nSigned-off-by: Daisuke HATAYAMA \u003cd.hatayama@jp.fujitsu.com\u003e\nCc: \"Luck, Tony\" \u003ctony.luck@intel.com\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nCc: Greg Ungerer \u003cgerg@snapgear.com\u003e\nCc: Roland McGrath \u003croland@redhat.com\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Alexander Viro \u003cviro@zeniv.linux.org.uk\u003e\nCc: Andi Kleen \u003candi@firstfloor.org\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "05f47fda9fc5b17bfab189e9d54228025befc996", "tree": "f42e4f13eed3d52022a629e6697c96f6155c9d66", "parents": [ "12bac0d9f4dbf3445a0319beee848d15fa32775e" ], "author": { "name": "Daisuke HATAYAMA", "email": "d.hatayama@jp.fujitsu.com", "time": "Fri Mar 05 13:44:05 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:45 2010 -0800" }, "message": "coredump: unify dump_seek() implementations for each binfmt_*.c\n\nThe current ELF dumper can produce broken corefiles if program headers\nexceed 65535. In particular, the program in 64-bit environment often\ndemands more than 65535 mmaps. If you google max_map_count, then you can\nfind many users facing this problem.\n\nSolaris has already dealt with this issue, and other OSes have also\nadopted the same method as in Solaris. Currently, Sun\u0027s document and AMD\n64 ABI include the description for the extension, where they call the\nextension Extended Numbering. See Reference for further information.\n\nI believe that linux kernel should adopt the same way as they did, so I\u0027ve\nwritten this patch.\n\nI am also preparing for patches of GDB and binutils.\n\nHow to fix\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n\nIn new dumping process, there are two cases according to weather or\nnot the number of program headers is equal to or more than 65535.\n\n - if less than 65535, the produced corefile format is exactly the same\n as the ordinary one.\n\n - if equal to or more than 65535, then e_phnum field is set to newly\n introduced constant PN_XNUM(0xffff) and the actual number of program\n headers is set to sh_info field of the section header at index 0.\n\nCompatibility Concern\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n\n * As already mentioned in Summary, Sun and AMD64 has already adopted\n this. See Reference.\n\n * There are four combinations according to whether kernel and userland\n tools are respectively modified or not. The next table summarizes\n shortly for each combination.\n\n ---------------------------------------------\n Original Kernel | Modified Kernel\n ---------------------------------------------\n \t \u003c 65535 | \u003e\u003d 65535 | \u003c 65535 | \u003e\u003d 65535\n -------------------------------------------------------------\n Original Tools | OK | broken | OK | broken (#)\n -------------------------------------------------------------\n Modified Tools | OK | broken | OK | OK\n -------------------------------------------------------------\n\n Note that there is no case that `OK\u0027 changes to `broken\u0027.\n\n (#) Although this case remains broken, O-M behaves better than\n O-O. That is, while in O-O case e_phnum field would be extremely\n small due to integer overflow, in O-M case it is guaranteed to be at\n least 65535 by being set to PN_XNUM(0xFFFF), much closer to the\n actual correct value than the O-O case.\n\nTest Program\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n\nHere is a test program mkmmaps.c that is useful to produce the\ncorefile with many mmaps. To use this, please take the following\nsteps:\n\n$ ulimit -c unlimited\n$ sysctl vm.max_map_count\u003d70000 # default 65530 is too small\n$ sysctl fs.file-max\u003d70000\n$ mkmmaps 65535\n\nThen, the program will abort and a corefile will be generated.\n\nIf failed, there are two cases according to the error message\ndisplayed.\n\n * ``out of memory\u0027\u0027 means vm.max_map_count is still smaller\n\n * ``too many open files\u0027\u0027 means fs.file-max is still smaller\n\nSo, please change it to a larger value, and then retry it.\n\nmkmmaps.c\n\u003d\u003d\n#include \u003cstdio.h\u003e\n#include \u003cstdlib.h\u003e\n#include \u003csys/mman.h\u003e\n#include \u003cfcntl.h\u003e\n#include \u003cunistd.h\u003e\nint main(int argc, char **argv)\n{\n\tint maps_num;\n\tif (argc \u003c 2) {\n\t\tfprintf(stderr, \"mkmmaps [number of maps to be created]\\n\");\n\t\texit(1);\n\t}\n\tif (sscanf(argv[1], \"%d\", \u0026maps_num) \u003d\u003d EOF) {\n\t\tperror(\"sscanf\");\n\t\texit(2);\n\t}\n\tif (maps_num \u003c 0) {\n\t\tfprintf(stderr, \"%d is invalid\\n\", maps_num);\n\t\texit(3);\n\t}\n\tfor (; maps_num \u003e 0; --maps_num) {\n\t\tif (MAP_FAILED \u003d\u003d mmap((void *)NULL, (size_t) 1, PROT_READ,\n\t\t\t\t\tMAP_SHARED | MAP_ANONYMOUS, (int) -1,\n\t\t\t\t\t(off_t) NULL)) {\n\t\t\tperror(\"mmap\");\n\t\t\texit(4);\n\t\t}\n\t}\n\tabort();\n\t{\n\t\tchar buffer[128];\n\t\tsprintf(buffer, \"wc -l /proc/%u/maps\", getpid());\n\t\tsystem(buffer);\n\t}\n\treturn 0;\n}\n\nTested on i386, ia64 and um/sys-i386.\nBuilt on sh4 (which covers fs/binfmt_elf_fdpic.c)\n\nReferences\n\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n\n - Sun microsystems: Linker and Libraries.\n Part No: 817-1984-17, September 2008.\n URL: http://docs.sun.com/app/docs/doc/817-1984\n\n - System V ABI AMD64 Architecture Processor Supplement\n Draft Version 0.99., May 11, 2009.\n URL: http://www.x86-64.org/\n\nThis patch:\n\nThere are three different definitions for dump_seek() functions in\nbinfmt_aout.c, binfmt_elf.c and binfmt_elf_fdpic.c, respectively. The\nonly for binfmt_elf.c.\n\nMy next patch will move dump_seek() into a header file in order to share\nthe same implementations for dump_write() and dump_seek(). As the first\nstep, this patch unify these three definitions for dump_seek() by applying\nthe past commits that have been applied only for binfmt_elf.c.\n\nSpecifically, the modification made here is part of the following commits:\n\n * d025c9db7f31fc0554ce7fb2dfc78d35a77f3487\n * 7f14daa19ea36b200d237ad3ac5826ae25360461\n\nThis patch does not change a shape of corefiles.\n\nSigned-off-by: Daisuke HATAYAMA \u003cd.hatayama@jp.fujitsu.com\u003e\nCc: \"Luck, Tony\" \u003ctony.luck@intel.com\u003e\nCc: Jeff Dike \u003cjdike@addtoit.com\u003e\nCc: David Howells \u003cdhowells@redhat.com\u003e\nCc: Greg Ungerer \u003cgerg@snapgear.com\u003e\nCc: Roland McGrath \u003croland@redhat.com\u003e\nCc: Oleg Nesterov \u003coleg@redhat.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Alexander Viro \u003cviro@zeniv.linux.org.uk\u003e\nCc: Andi Kleen \u003candi@firstfloor.org\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: \u003clinux-arch@vger.kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "12bac0d9f4dbf3445a0319beee848d15fa32775e", "tree": "4b712e05e785c010a31d12bb4a1f662173b9fcee", "parents": [ "e17a5765f20d1219c3f05eb17aab11671978e0ec" ], "author": { "name": "Alexey Dobriyan", "email": "adobriyan@gmail.com", "time": "Fri Mar 05 13:44:00 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:45 2010 -0800" }, "message": "proc: warn on non-existing proc entries\n\n* warn if creation goes on to non-existent directory\n* warn if removal goes on from non-existing directory\n* warn if non-existing proc entry is removed\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCc: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ], "next": "e17a5765f20d1219c3f05eb17aab11671978e0ec" }