)]}' { "log": [ { "commit": "f9df58cb27dfd605eced643bb3aa599fe4feeee8", "tree": "23b5151855d07f3b25c081e29d14f5d353367248", "parents": [ "fd995f7039f1955ccc6b43e1e2d168060b31e4b2" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 23 13:14:13 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:41 2007 -0400" }, "message": "libata-pmp-prep: implement ATA_LFLAG_DISABLED\n\nImplement ATA_LFLAG_DISABLED. The flag indicates the link is disabled\ndue to EH recovery failure. While a link is disabled, no EH action is\ntaken on the link and suspend/resume become noop too.\n\nThis will be used by PMP links to manage failed links.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "fd995f7039f1955ccc6b43e1e2d168060b31e4b2", "tree": "1aac318f211493183508a97aa6c8b2b6cb41d0b6", "parents": [ "ae791c05694d7391ee9261a0450a50f7e95aedfd" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 23 13:14:12 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:41 2007 -0400" }, "message": "libata-pmp-prep: implement ATA_LFLAG_NO_RETRY\n\nSome PMP links are connected to internal pseudo devices which may come\nand go depending on situation. There\u0027s no reason to try hard to\nrecover them. ATA_LFLAG_NO_RETRY tells EH to not retry if the device\nattached to the link fails.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "ae791c05694d7391ee9261a0450a50f7e95aedfd", "tree": "73e3fbcd6cdfe667b5dcc512daaec7fb5941a132", "parents": [ "da917d69d0ea63f5390716cba6e77f490ce96df9" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 23 13:14:12 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:41 2007 -0400" }, "message": "libata-pmp-prep: implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMB\n\nSome links on some PMPs locks up on SRST and/or report incorrect\ndevice signature. Implement ATA_LFLAG_NO_SRST, ASSUME_ATA and\nASSUME_SEMB to handle these quirky links. NO_SRST makes EH avoid\nSRST. ASSUME_ATA and SEMB forces class code to ATA and SEMB_UNSUP\nrespectively. Note that SEMB isn\u0027t currently supported yet so the\n_UNSUP variant is used.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "da917d69d0ea63f5390716cba6e77f490ce96df9", "tree": "214670f42be4c140bbd05226adc8f86db51ee725", "parents": [ "31cc23b34913bc173680bdc87af79e551bf8cc0d" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 23 13:14:12 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:41 2007 -0400" }, "message": "libata-pmp-prep: implement qc_defer helpers\n\nImplement ap-\u003enr_active_links (the number of links with active qcs),\nap-\u003eexcl_link (pointer to link which can be used by -\u003eqc_defer and is\ncleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and\nata_link_active().\n\nThese can be used by -\u003eqc_defer() to implement proper command\nexclusion. This set of helpers seem enough for both sil24 (ATAPI\nexclusion needed) and cmd-switching PMP.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "31cc23b34913bc173680bdc87af79e551bf8cc0d", "tree": "ec64421ead9259174f0de8b22c36449ece6d69a4", "parents": [ "fb7fd61454c8681cd2621051a710b78a00369203" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 23 13:14:12 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:41 2007 -0400" }, "message": "libata-pmp-prep: implement ops-\u003eqc_defer()\n\nControllers which support PMP have various restrictions on which\ncombinations of commands are allowed to what number of devices\nconcurrently. This patch implements ops-\u003eqc_defer() which determines\nwhether a qc can be issued at the moment or should be deferred.\n\nIf the function returns ATA_DEFER_LINK, the qc will be deferred until\na qc completes on the link. If ATA_DEFER_PORT, until a qc completes\non any link. The defer conditions are advisory and in general\nATA_DEFER_LINK can be considered as lower priority deferring than\nATA_DEFER_PORT.\n\nops-\u003eqc_defer() replaces fixed ata_scmd_need_defer(). For standard\nNCQ/non-NCQ exclusion, ata_std_qc_defer() is implemented. ahci and\nsata_sil24 are converted to use ata_std_qc_defer().\n\nops-\u003eqc_defer() is heavier than the original mechanism because full qc\nis prepped before determining to defer it, but various information is\nneeded to determine defer conditinos and fully translating a qc is the\nonly way to supply such information in generic manner.\n\nIMHO, this shouldn\u0027t cause any noticeable performance issues as\n\n* for most cases deferring occurs rarely (except for NCQ-aware\n cmd-switching PMP)\n* translation itself isn\u0027t that expensive\n* once deferred the command won\u0027t be repeated until another command\n completes which usually is a very long time cpu-wise.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "e0a7175263db4a226558883a51a88a5d2bc5d9fe", "tree": "f9d23742df7f8a461ff63ad5be190f6a17742dd8", "parents": [ "854c73a2f1c3bcc4aa88c25e208dc597e8efb795" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 23 13:14:12 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:40 2007 -0400" }, "message": "libata-pmp-prep: add PMP related constants, fields, ops and update helpers\n\nAdd PMP related constants, fields and ops. Also, update\nata_class_enabled/disabled() such that PMP classes are considered.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "854c73a2f1c3bcc4aa88c25e208dc597e8efb795", "tree": "210569f3c4fa4f9413ceb0bc3fcf89648a9894b2", "parents": [ "c78968bb0f7714ceba1cdfa23714454fc98cefdf" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 23 13:14:11 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:40 2007 -0400" }, "message": "libata: misc updates for AN\n\nUpdate AN support in preparation of PMP support.\n\n* s/ata_id_has_AN/ata_id_has_atapi_AN/\n* add AN enabled reporting during configuration\n* add err_mask to AN configuration failure reporting\n* update LOCKING comment for ata_scsi_media_change_notify()\n* check whether ATA dev is attached to SCSI dev ata_scsi_media_change_notify()\n* set ATA_FLAG_AN in ahci and sata_sil24\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Kriten Carlson Accardi \u003ckristen.c.accardi@intel.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "3f19859ee95a38c066a0420eb8a30c76ecd67a42", "tree": "0ad611a48ddb18be3b8ec35e4dc318e2fd344961", "parents": [ "7a234aff3d83728fd83cf19df32d3df52566d2ac" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sun Sep 02 23:23:57 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:39 2007 -0400" }, "message": "libata: update ata_dev_try_classify() arguments\n\nMake ata_dev_try_classify() take a pointer to ata_device instead of\nata_port/port_number combination for consistency and add @present\nargument. @present indicates whether the device seems present during\nreset. It\u0027s the result of TF access during softreset and link\nonlineness during hardreset. @present will be used to improve\ndiagnostic failure handling.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "2557164e0b18e78a7772632a2a90832f56181fc5", "tree": "f8c9830e65393be8eb470d6300e1c2bc26399b08", "parents": [ "e2d352af6d8f1734394bc1bcf0afe345cc3ef235" ], "author": { "name": "Kristen Carlson Accardi", "email": "kristen.c.accardi@intel.com", "time": "Tue Sep 11 11:41:59 2007 -0700" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:39 2007 -0400" }, "message": "ata: increase allowed config flags\n\nIn anticipation of more features, increase number of config flags\nallowed, and move the init flags.\n\nSigned-off-by: Kristen Carlson Accardi \u003ckristen.c.accardi@intel.com\u003e\nCc: Hugh Dickens \u003chugh@veritas.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "a1e10f7e68a544c80081fee4fa550dc28389f44a", "tree": "cf6673989f360e0b12b2a658a7042d30420c14eb", "parents": [ "cbcdd87593a1d85c5c4b259945a3a09eee12814d" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Aug 18 13:28:49 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:37 2007 -0400" }, "message": "libata: move EH repeat reporting into ata_eh_report()\n\nEH is sometimes repeated without any error or action. For example,\nthis happens when probing IDENTIFY fails because of a phantom device.\nIn these cases, all the repeated EH does is making sure there is no\nunhandled error or pending action and return. This repeation is\nnecessary to avoid losing any event which occurred while EH was in\nprogress.\n\nUnfortunately, this dry run causes annonying \"EH pending after\ncompletion\" message. This patch moves the repeat reporting into\nata_eh_report() such that it\u0027s more compact and skipped on dry runs.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: Mikael Pettersson \u003cmikep@it.uu.se\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "cbcdd87593a1d85c5c4b259945a3a09eee12814d", "tree": "ee03df963a12ec7f30f6c3a8742421daf2c34f50", "parents": [ "e923090ddd9fef1d4e06dc6c5295e29baced19f3" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Sat Aug 18 13:14:55 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:37 2007 -0400" }, "message": "libata: implement and use ata_port_desc() to report port configuration\n\nCurrently, port configuration reporting has the following problems.\n\n* iomapped address is reported instead of raw address\n* report contains irrelevant fields or lacks necessary fields for\n non-SFF controllers.\n* host-\u003eirq/irq2 are there just for reporting and hacky.\n\nThis patch implements and uses ata_port_desc() and\nata_port_pbar_desc(). ata_port_desc() is almost identical to\nata_ehi_push_desc() except that it takes @ap instead of @ehi, has no\nlocking requirement, can only be used during host initialization and \"\n\" is used as separator instead of \", \". ata_port_pbar_desc() is a\nhelper to ease reporting of a PCI BAR or an offsetted address into it.\n\nLLD pushes whatever description it wants using the above two\nfunctions. The accumulated description is printed on host\nregistration after \"[S/P]ATA max MAX_XFERMODE \".\n\nSFF init helpers and ata_host_activate() automatically add\ndescriptions for addresses and irq respectively, so only LLDs which\nisn\u0027t standard SFF need to add custom descriptions. In many cases,\nsuch controllers need to report different things anyway.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "c7293870a93a99e9ce0f4d98f3a271539c7c6ad6", "tree": "837cb89920034e7983b483f1d8db5fb96c454414", "parents": [ "614fe29bd91f99cc1c1fbf3274fa918691044f47" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Wed Aug 22 23:31:43 2007 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:37 2007 -0400" }, "message": "libata: Strict checking for identify reporting\n\nThe ATA specifications require checks on certain flags before assuming\nthe validity of other data. Go through the methods and correct those\nneeding extra checks. Also note limits on ata_id_major_version with\nrespect to ATA-1 and ATA-2. Correct the 32bit PIO check.\n\nWants to sit in -mm for a bit in case of a screwup on my part that I\ndidn\u0027t hit on the test drives and also in case someone, somewhere has\na drive that gets it wrong.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "4743d0854faa5624148ac6cf3fe9692e977eefa1", "tree": "9d02345afbb7d299543e456eb12e0a2adc2de120", "parents": [ "81ad1837b590775336f68eafcae8dab13a975b3a" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Wed Aug 22 23:12:50 2007 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:37 2007 -0400" }, "message": "libata-portmap: Remove unused definitions\n\nWith the PCI layer properly handling legacy IDE and the kernel now using\nit these can go\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "ac8869d56d95a8c74403e6f7a47d74fcfcc1b988", "tree": "2f812aff4c6e559f3c093f9933960d09631375c8", "parents": [ "7d73a363dea186a864f6295bbe842da8044d42cd" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Thu Aug 16 03:17:03 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:35 2007 -0400" }, "message": "[libata] Remove -\u003eport_disable() hook\n\nIt was always set to ata_port_disable(). Removed the hook, and replaced\nthe very few ap-\u003eops-\u003eport_disable() callsites with direct calls to\nata_port_disable().\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "e1ddb4b6a2c9b2c72991eb8640ef2f50691ac502", "tree": "fd9d0f14c5a5e329f4c1d2ee737177c5caf24b02", "parents": [ "6d32d30f55020d766388df7515f771f68c973033" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Thu Aug 16 02:33:36 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:34 2007 -0400" }, "message": "[libata] add ACPI cable detect API\n\nCombined from two Alan Cox patches:\n\n1) libata: ACPI checks for 80wire cable\n\nWe can use the ACPI mode information with several drivers as a hint to\ncable type. If the ACPI mode set by the BIOS is faster than UDMA33 then\nwe know the BIOS thinks there are 80wire cables. If it doesn\u0027t set such a\nmode or it has no ACPI method then we get no further information and can\nrely on existing approaches\n\nIntroduce the function headers needed. Null it out for non ACPI boxes\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\n\n2) libata: ACPI checks for 80wire cable\n\nProvide actual methods for checking if the ACPI support thinks the cable\nis 80wire, or doesn\u0027t know\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\n\nCombined into a single changeset and\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "6d32d30f55020d766388df7515f771f68c973033", "tree": "ec0efe48460b5b3f177fed2698ccd04b7964359b", "parents": [ "cb94c1cf5a6beffbd8935eb91227df0dd1987644" ], "author": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Wed Aug 15 05:38:46 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:34 2007 -0400" }, "message": "[libata] Remove -\u003eirq_ack() hook, and ata_dummy_irq_on()\n\n* -\u003eirq_ack() is redundant to what the irq handler already\n performs... chk-status + irq-clear. Furthermore, it is only\n called in one place, when screaming-irq-debugging is enabled,\n so we don\u0027t want to bother with a hook just for that.\n\n* ata_dummy_irq_on() is only ever used in drivers that have\n no callpath reaching -\u003eirq_on(). Remove .irq_on hook from\n those drivers, and the now-unused ata_dummy_irq_on()\n\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "cb94c1cf5a6beffbd8935eb91227df0dd1987644", "tree": "2466729967ea54b176f966b0c08a762a0f8a5c10", "parents": [ "1552945669b4fb23bff8d3b30221bfe3ade63515" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Jul 30 14:24:15 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:34 2007 -0400" }, "message": "libata: add printf format attribute to ehi desc functions\n\nTell the compiler that [__]ata_ehi_push_desc() functions take printf\nstyle format string and arguments.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "1552945669b4fb23bff8d3b30221bfe3ade63515", "tree": "843dc8ad2a108a1fcea95bf503cc4cb1abd848ca", "parents": [ "b8773531cc54c1ed10c8ec301353ee6b53b601a5" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Jul 30 14:23:03 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:34 2007 -0400" }, "message": "libata: use ata_port_printk() in ata_wait_idle()\n\nata_wait_idle() identified controller by printing out the address of\nthe Status register. This is bogus because 1. it\u0027s iomapped address\n2. some controllers don\u0027t have Status register and don\u0027t initialize\nthe field. Use ata_port_printk() instead.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "2f2949680ad89d606db838340b17c30216c0bb0f", "tree": "25d7918c7b846d151776bbdf6a111a1d241d6b05", "parents": [ "9f45cbd3f0fc597530aaf85cad7fe52cd63f1fd8" ], "author": { "name": "Kristen Carlson Accardi", "email": "kristen.c.accardi@intel.com", "time": "Wed Aug 15 04:11:25 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:33 2007 -0400" }, "message": "[libata] ahci: send event when AN received\n\nWhen we get an SDB FIS with the \u0027N\u0027 bit set, we should send\nan event to user space to indicate that there has been a\nmedia change. This will be done via the scsi device.\n\nSigned-off-by: Kristen Carlson Accardi \u003ckristen.c.accardi@intel.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "9f45cbd3f0fc597530aaf85cad7fe52cd63f1fd8", "tree": "44f9f11250f7629e7091b1532489d7a6539f758a", "parents": [ "05d1efffdc9bf84311bb1a3c2e3db55b544ca119" ], "author": { "name": "Kristen Carlson Accardi", "email": "kristen.c.accardi@intel.com", "time": "Wed Aug 15 03:57:11 2007 -0400" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:33 2007 -0400" }, "message": "[libata] check for SATA async notify support\n\nCheck to see if an ATAPI device supports Asynchronous Notification.\nIf so, enable it, if the host controller supports AN.\n\nSigned-off-by: Kristen Carlson Accardi \u003ckristen.c.accardi@intel.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "0bc2a79a2002e3cc1b514c100b6c576983da6a90", "tree": "7669cfe54f3cf5125be440c5c9e84d29cec27294", "parents": [ "e3667ebf857ba744b5211c90d46f6a17dd9a2479" ], "author": { "name": "Alan Cox", "email": "alan@lxorguk.ukuu.org.uk", "time": "Tue Jul 31 14:01:48 2007 +0100" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:32 2007 -0400" }, "message": "libata: Correct IORDY handling\n\nDebugging a report of a problem with an ancient solid state disk showed\nup some problems in the IORDY handling\n\n1.\tWe check the wrong bit to see if the device has IORDY\n2.\tEven then some ancient creaking piles of crap don\u0027t support\n\tSETXFER at all.\n\nThe cases it fixes are obscure and the risk of side effects is slight\nbut possible. This also moves us slightly closer to supporting original\nMFM/RLL disks with libata.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "8989805d6d176aa32c0e9a68a536aa4c8ef5231c", "tree": "9111bf6a881ab6c90aac9953b678ab62bb6c2d3b", "parents": [ "dbd826168d6267a26cf20cd233f6730f8d8047d6" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:23 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:31 2007 -0400" }, "message": "libata-link: add PMP links\n\nAdd link-\u003epmp, ap-\u003enr_pmp_links, ap-\u003epmp_link[], and implement/update\nlink helpers.\n\nprintk helpers are updated such that port and link are identifed as\n\u0027ataP:\u0027 if no PMP is attached, while device is identified as\n\u0027ataP.DD:\u0027. If PMP is attached, they become \u0027ataP:\u0027, \u0027ataP.LL:\u0027 and\n\u0027ataP.LL\u0027 - ie. link and device are identified their PMP number.\n\nIf PPM is attached (ap-\u003enr_pmp_links !\u003d 0), ata_for_each_link()\niterates over PMP links, while __ata_for_each_link() iterates over the\nhost link + PMP links. If PMP is not attached (ap-\u003enr_pmp_links \u003d\u003d\n0), both iterate over only the host link.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "dbd826168d6267a26cf20cd233f6730f8d8047d6", "tree": "961486fededf27561a2d790ecab6dc50f94617a9", "parents": [ "4fb37a25b976e8d1b34461330b3f2c6d9b94c133" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:23 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:31 2007 -0400" }, "message": "libata-link: implement ata_link_abort()\n\nImplement ata_link_abort().\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "0c88758b5a6325428aaadab619886242db20ceae", "tree": "bf84abbce984fa45c4ce927b65695f30a8ea3a43", "parents": [ "0260731f0187840e272bfa10d3ba0f3e417976f5" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:23 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:31 2007 -0400" }, "message": "libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags\n\nHRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to\nata_link-\u003eflags. This will allow host and PMP links to have different\nattributes. ata_port_info-\u003elink_flags is added and used by LLDs to\nspecify these flags during initialization.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "0260731f0187840e272bfa10d3ba0f3e417976f5", "tree": "d39219275e89ce782f3151b5ac47726957a81e24", "parents": [ "cc0680a580b5be81a1ca321b58f8e9b80b5c1052" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:23 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:31 2007 -0400" }, "message": "libata-link: linkify config/EH related functions\n\nMake the following functions deal with ata_link instead of ata_port.\n\n* ata_set_mode()\n* ata_eh_autopsy() and related functions\n* ata_eh_report() and related functions\n* suspend/resume related functions\n* ata_eh_recover() and related functions\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "cc0680a580b5be81a1ca321b58f8e9b80b5c1052", "tree": "57454cdfdc9890f4e8d9f532e9cd240c7361951f", "parents": [ "955e57dfde4ff75e4d7329ac7a3d645b16015309" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:23 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:31 2007 -0400" }, "message": "libata-link: linkify reset\n\nMake reset methods and related functions deal with ata_link instead of\nata_port.\n\n* ata_do_reset()\n* ata_eh_reset()\n* all prereset/reset/postreset methods and related functions\n\nThis patch introduces no behavior change.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "936fd7328657884d5a69a55666c74a55aa83ca27", "tree": "83a78a02d2c65ce835fe33882dfe5043d3240bff", "parents": [ "f58229f8060055b08b34008ea08f31de1e2f003c" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:23 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:30 2007 -0400" }, "message": "libata-link: linkify PHY-related functions\n\nMake the following PHY-related functions to deal with ata_link instead\nof ata_port.\n\n* sata_print_link_status()\n* sata_down_spd_limit()\n* ata_set_sata_spd_limit() and friends\n* sata_link_debounce/resume()\n* sata_scr_valid/read/write/write_flush()\n* ata_link_on/offline()\n\nThis patch introduces no behavior change.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "f58229f8060055b08b34008ea08f31de1e2f003c", "tree": "6ca5ef546671cb975ef3632fb032c238eaf1bb4c", "parents": [ "9af5c9c97dc9d599281778864c72b385f0c63341" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:23 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:30 2007 -0400" }, "message": "libata-link: implement and use link/device iterators\n\nMultiple links and different number of devices per link should be\nconsidered to iterate over links and devices. This patch implements\nand uses link and device iterators - ata_port_for_each_link() and\nata_link_for_each_dev() - and ata_link_max_devices().\n\nThis change makes a lot of functions iterate over only possible\ndevices instead of from dev 0 to dev ATA_MAX_DEVICES. All such\nchanges have been examined and nothing should be broken.\n\nWhile at it, add a separating comment before device helpers to\ndistinguish them better from link helpers and others.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "9af5c9c97dc9d599281778864c72b385f0c63341", "tree": "8359986bd42c4a9a5b1993078aa9ee4c7971ac3d", "parents": [ "640fdb504941fa2b9f6f274716fc9f97f2bf6bff" ], "author": { "name": "Tejun Heo", "email": "htejun@gmail.com", "time": "Mon Aug 06 18:36:22 2007 +0900" }, "committer": { "name": "Jeff Garzik", "email": "jeff@garzik.org", "time": "Fri Oct 12 14:55:30 2007 -0400" }, "message": "libata-link: introduce ata_link\n\nIntroduce ata_link. It abstracts PHY and sits between ata_port and\nata_device. This new level of abstraction is necessary to support\nSATA Port Multiplier, which basically adds a bunch of links (PHYs) to\na ATA host port. Fields related to command execution, spd_limit and\nEH are per-link and thus moved to ata_link.\n\nThis patch only defines the host link. Multiple link handling will be\nadded later. Also, a lot of ap-\u003elink derefences are added but many of\nthem will be removed as each part is converted to deal directly with\nata_link instead of ata_port.\n\nThis patch introduces no behavior change.\n\nSigned-off-by: Tejun Heo \u003chtejun@gmail.com\u003e\nCc: James Bottomley \u003cJames.Bottomley@SteelEye.com\u003e\nSigned-off-by: Jeff Garzik \u003cjeff@garzik.org\u003e\n" }, { "commit": "e86908614f2c7fec401827e5cefd7a6ea9407f85", "tree": "fcb5d9e52422b37bdaf0e647126ebdfc1680f162", "parents": [ "547307420931344a868275bd7ea7a30f117a15a9", "9b4b8feb962f4b3e74768b7205f1f8f6cce87238" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 21:55:47 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 21:55:47 2007 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc\n\n* \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)\n [POWERPC] Add memchr() to the bootwrapper\n [POWERPC] Implement logging of unhandled signals\n [POWERPC] Add legacy serial support for OPB with flattened device tree\n [POWERPC] Use 1TB segments\n [POWERPC] XilinxFB: Allow fixed framebuffer base address\n [POWERPC] XilinxFB: Add support for custom screen resolution\n [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters\n [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci\n [POWERPC] 4xx: Kilauea defconfig file\n [POWERPC] 4xx: Kilauea DTS\n [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x\n [POWERPC] 4xx: Add AMCC 405EX support to cputable.c\n [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable\n [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers\n [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig\n [POWERPC] 85xx: Killed \u003casm/mpc85xx.h\u003e\n [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS\n [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.\n [POWERPC] mpc8272ads: Remove muram from the CPM reg property.\n [POWERPC] Make clockevents work on PPC601 processors\n ...\n\nFixed up conflict in Documentation/powerpc/booting-without-of.txt manually.\n" }, { "commit": "1189be6508d45183013ddb82b18f4934193de274", "tree": "58924481b4de56699e4a884dce8dc601e71cf7d1", "parents": [ "287e5d6fcccfa38b953cebe307e1ddfd32363355" ], "author": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Thu Oct 11 20:37:10 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 14:05:17 2007 +1000" }, "message": "[POWERPC] Use 1TB segments\n\nThis makes the kernel use 1TB segments for all kernel mappings and for\nuser addresses of 1TB and above, on machines which support them\n(currently POWER5+, POWER6 and PA6T).\n\nWe detect that the machine supports 1TB segments by looking at the\nibm,processor-segment-sizes property in the device tree.\n\nWe don\u0027t currently use 1TB segments for user addresses \u003c 1T, since\nthat would effectively prevent 32-bit processes from using huge pages\nunless we also had a way to revert to using 256MB segments. That\nwould be possible but would involve extra complications (such as\nkeeping track of which segment size was used when HPTEs were inserted)\nand is not addressed here.\n\nParts of this patch were originally written by Ben Herrenschmidt.\n\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n" }, { "commit": "287e5d6fcccfa38b953cebe307e1ddfd32363355", "tree": "f06b288f7f2e5a1eecc093ba977141c9035d3534", "parents": [ "b4d6a7268fc754eefb196cabc0ccfa2e97022af2" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Oct 11 04:31:56 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 14:05:17 2007 +1000" }, "message": "[POWERPC] XilinxFB: Allow fixed framebuffer base address\n\nAllow a fixed framebuffer address to be assigned to the framebuffer device\ninstead of allocating the framebuffer from the consistent memory pool.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n" }, { "commit": "b4d6a7268fc754eefb196cabc0ccfa2e97022af2", "tree": "406af23412b9a984b91804c9ca956c8f3dda0a22", "parents": [ "01ba1e9d26fcd29f3ad4f3a5bcf40c0fbc40ee81" ], "author": { "name": "Grant Likely", "email": "grant.likely@secretlab.ca", "time": "Thu Oct 11 04:31:51 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 14:05:17 2007 +1000" }, "message": "[POWERPC] XilinxFB: Add support for custom screen resolution\n\nSome custom implementations of the xilinx fb can use resolutions other\nthan 640x480. This patch allows the resolution to be specified in the\ndevice tree or the xilinx_platform_data structure.\n\nSigned-off-by: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n" }, { "commit": "d94bad827d9a0df939a0e7ed081a2780b9f72c4b", "tree": "ee4d5dd0c9bcaf49438eb3660baf246482281764", "parents": [ "8087ebd5a121ac6bf5a8eba2459c01d3659c3e31" ], "author": { "name": "Valentine Barshak", "email": "vbarshak@ru.mvista.com", "time": "Mon Oct 08 22:51:24 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 14:05:17 2007 +1000" }, "message": "[POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci\n\nAdd 64-bit physical address support to setup_indirect_pci().\n\nSigned-off-by: Valentine Barshak \u003cvbarshak@ru.mvista.com\u003e\nAcked-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\n" }, { "commit": "ce9d3c9a6a9aef61525be07fe6ba27d937236aa2", "tree": "1b29bcb8f60fc6b59fa0d7b833cc733b8ebe17c9", "parents": [ "038a5008b2f395c85e6e71d6ddf3c684e7c405b0", "3d73c2884f45f9a297cbc956cea101405a9703f2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:43:13 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:43:13 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits)\n mlx4_core: Fix section mismatches\n IPoIB: Allow setting policy to ignore multicast groups\n IB/mthca: Mark error paths as unlikely() in post_srq_recv functions\n IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages.\n IB/ipath: Remove redundant link state checks\n IB/ipath: Fix IB_EVENT_PORT_ERR event\n IB/ipath: Better handling of unexpected GPIO interrupts\n IB/ipath: Maintain active time on all chips\n IB/ipath: Fix QHT7040 serial number check\n IB/ipath: Indicate a couple of chip bugs to userspace\n IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround\n IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close\n IB/ipath: Remove duplicate copy of LMC\n IB/ipath: Add ability to set the LMC via the sysfs debugging interface\n IB/ipath: Optimize completion queue entry insertion and polling\n IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED\n IB/ipath: Generate flush CQE when QP is in error state\n IB/ipath: Remove redundant code\n IB/ipath: Future proof eeprom checksum code (contents reading)\n IB/ipath: UC RDMA WRITE with IMMEDIATE doesn\u0027t send the immediate\n ...\n" }, { "commit": "038a5008b2f395c85e6e71d6ddf3c684e7c405b0", "tree": "4735eab577e97e5a22c3141e3f60071c8065585e", "parents": [ "dd6d1844af33acb4edd0a40b1770d091a22c94be", "266918303226cceac7eca38ced30f15f277bd89c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:40:14 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:40:14 2007 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6\n\n* \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits)\n [SKY2]: status polling loop (post merge)\n [NET]: Fix NAPI completion handling in some drivers.\n [TCP]: Limit processing lost_retrans loop to work-to-do cases\n [TCP]: Fix lost_retrans loop vs fastpath problems\n [TCP]: No need to re-count fackets_out/sacked_out at RTO\n [TCP]: Extract tcp_match_queue_to_sack from sacktag code\n [TCP]: Kill almost unused variable pcount from sacktag\n [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L\n [TCP]: Add bytes_acked (ABC) clearing to FRTO too\n [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2\n [NETFILTER]: x_tables: add missing ip6t_modulename aliases\n [NETFILTER]: nf_conntrack_tcp: fix connection reopening\n [QETH]: fix qeth_main.c\n [NETLINK]: fib_frontend build fixes\n [IPv6]: Export userland ND options through netlink (RDNSS support)\n [9P]: build fix with !CONFIG_SYSCTL\n [NET]: Fix dev_put() and dev_hold() comments\n [NET]: make netlink user -\u003e kernel interface synchronious\n [NET]: unify netlink kernel socket recognition\n [NET]: cleanup 3rd argument in netlink_sendskb\n ...\n\nFix up conflicts manually in Documentation/feature-removal-schedule.txt\nand my new least favourite crap, the \"mod_devicetable\" support in the\nfiles include/linux/mod_devicetable.h and scripts/mod/file2alias.c.\n\n(The latter files seem to be explicitly _designed_ to get conflicts when\ndifferent subsystems work with them - that have an absolutely horrid\nlack of subsystem separation!)\n\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "dd6d1844af33acb4edd0a40b1770d091a22c94be", "tree": "e6bd3549919773a13b770324a4dddb51b194b452", "parents": [ "19f71153b9be219756c6b2757921433a69b7975c", "aaf76a3245c02faba51c96b9a340c14d6bb0dcc0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:21:23 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:21:23 2007 -0700" }, "message": "Merge branch \u0027upstream\u0027 of git://ftp.linux-mips.org/pub/scm/upstream-linus\n\n* \u0027upstream\u0027 of git://ftp.linux-mips.org/pub/scm/upstream-linus: (80 commits)\n [MIPS] tlbex.c: Cleanup __init usage.\n [MIPS] WRPPMC serial support move to platform device\n [MIPS] R1: Fix hazard barriers to make kernels work on R2 also.\n [MIPS] VPE: reimplement ELF loader.\n [MIPS] cleanup WRPPMC include files\n [MIPS] Add BUG_ON assertion for attempt to run kernel on the wrong CPU type.\n [MIPS] SMP: Use ISO C struct initializer for local structs.\n [MIPS] SMP: Kill useless casts.\n [MIPS] Kill num_online_cpus() loops.\n [MIPS] SMP: Implement smp_call_function_mask().\n [MIPS] Make facility to convert CPU types to strings generally available.\n [MIPS] Convert list of CPU types from #define to enum.\n [MIPS] Optimize get_unaligned / put_unaligned implementations.\n [MIPS] checkfiles: Fix \"need space after that \u0027,\u0027\" errors.\n [MIPS] Fix \"no space between function name and open parenthesis\" warnings.\n [MIPS] Allow hardwiring of the CPU type to a single type for optimization.\n [MIPS] tlbex: Size optimize code by declaring a few functions inline.\n [MIPS] pg-r4k.c: Dump the generated code\n [MIPS] Cobalt: Remove cobalt_machine_power_off()\n [MIPS] Cobalt: Move reset port definition to arch/mips/cobalt/reset.c\n ...\n" }, { "commit": "19f71153b9be219756c6b2757921433a69b7975c", "tree": "cc2c5c290a88d61df16848f733aed8708e82c119", "parents": [ "e6005a85acb9609326512ecc784859831cfb24a3", "8f4dd2e42637fd61a6366d2cace69091926eaa15" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:20:44 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:20:44 2007 -0700" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits)\n ide: use only -\u003eset_pio_mode method for programming PIO modes (take 2)\n sis5513: don\u0027t change UDMA settings when programming PIO\n it8213/piix/slc90e66: don\u0027t change DMA settings when programming PIO\n alim15x3: PIO mode setup fixes\n siimage: fix -\u003eset_pio_mode method to select PIO data transfer\n cs5520: don\u0027t enable VDMA in -\u003espeedproc\n sc1200: remove redundant warning message from sc1200_tune_chipset()\n ide-pmac: PIO mode setup fixes (take 3)\n icside: fix -\u003espeedproc to return on unsupported modes (take 5)\n sgiioc4: use ide_tune_dma()\n amd74xx/via82cxxx: use ide_tune_dma()\n ide: add ide_set{_max}_pio() (take 4)\n ide: Kconfig face-lift\n ide: move ide_rate_filter() calls to the upper layer (take 2)\n sis5513: add -\u003eudma_filter method for chipset_family \u003e\u003d ATA_133\n ide: mode limiting fixes for user requested speed changes\n ide: add missing ide_rate_filter() calls to -\u003espeedproc()-s\n ide: call udma_filter() before resorting to the UltraDMA mask\n ide: make jmicron match vendor and device class\n pdc202xx_new: switch to using pci_get_slot() (take 2)\n ...\n" }, { "commit": "6f35308c3ffa256bed183adf6f2c0c6c211ca487", "tree": "f1aaaec5f650bdd80d30230df25bbf33e43efd5f", "parents": [ "19ad7ae47e4ce4eb2a583e437d653a96da7897ac", "c3f8f65046127f471d0b6193a1923185b354c011" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:19:50 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:19:50 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.o-hand.com/linux-rpurdie-backlight\n\n* \u0027for-linus\u0027 of git://git.o-hand.com/linux-rpurdie-backlight:\n backlight: Convert corgi backlight driver into a more generic driver\n backlight: Add Samsung LTV350QV LCD driver\n backlight: Fix cr_bllcd allocations and error paths\n backlight/leds: Make two structs static\n" }, { "commit": "19ad7ae47e4ce4eb2a583e437d653a96da7897ac", "tree": "699fda69476d256aae62e44baf7f98495a353204", "parents": [ "1ce48904285fe4b0298864f9153a8502ebeac35c", "1855256c497ecfefc730df6032243f26855ce52c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:18:45 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:18:45 2007 -0700" }, "message": "Merge branch \u0027dmi-const\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6\n\n* \u0027dmi-const\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:\n drivers/firmware: const-ify DMI API and internals\n" }, { "commit": "1ce48904285fe4b0298864f9153a8502ebeac35c", "tree": "ffe1e0c31cdea427b48ae4d4d59a96ff9d208f32", "parents": [ "55982fd184a065b1c69279d29cbc01dbf424d2f4", "780513ecb80ea0934fc6833efc4f5ed9ab4ff9bb" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:14:22 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:14:22 2007 -0700" }, "message": "Merge branch \u0027block-2.6.24\u0027 of git://git.kernel.dk/data/git/linux-2.6-block\n\n* \u0027block-2.6.24\u0027 of git://git.kernel.dk/data/git/linux-2.6-block: (37 commits)\n [BLOCK] Fix failing compile with BLK_DEV_IO_TRACE\u003dn\n compat_ioctl: move floppy handlers to block/compat_ioctl.c\n compat_ioctl: move cdrom handlers to block/compat_ioctl.c\n compat_ioctl: move BLKPG handling to block/compat_ioctl.c\n compat_ioctl: move hdio calls to block/compat_ioctl.c\n compat_ioctl: handle blk_trace ioctls\n compat_ioctl: add compat_blkdev_driver_ioctl()\n compat_ioctl: move common block ioctls to compat_blkdev_ioctl\n Sysace: Don\u0027t enable IRQ until after interrupt handler is registered\n Sysace: sparse fixes\n Sysace: Minor coding convention fixup\n drivers/block/umem: use DRIVER_NAME where appropriate\n drivers/block/umem: trim trailing whitespace\n drivers/block/umem: minor cleanups\n drivers/block/umem: use dev_printk()\n drivers/block/umem: move private include away from include/linux\n Sysace: Labels in C code should not be indented.\n Sysace: Add of_platform_bus binding\n Sysace: Move IRQ handler registration to occur after FSM is initialized\n Sysace: minor rework and cleanup changes\n ...\n" }, { "commit": "55982fd184a065b1c69279d29cbc01dbf424d2f4", "tree": "9b309cba341736a0766249ba51972a8ca040e502", "parents": [ "1ef3e36251e4edc77a48967d015a87ca3c4283ea", "a7e30b8d91d3291de4543d97849193ebc3ec4c1c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:13:44 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:13:44 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:\n [AVR32] Fix random segfault with preemption\n [AVR32] Don\u0027t use __builtin_xchg()\n [AVR32] ngw100 i2c-gpio tweaks\n [AVR32] Ignore a few irrelevant syscalls\n [AVR32] SMC configuration in clock cycles\n [AVR32] Drop support for redundant \"keepinitrd\" boot-time parm.\n [AVR32] Make dma_sync_*_for_cpu no-ops\n [AVR32] Remove unneeded 8K alignment of .text section\n [AVR32] Kill a few hardcoded constants in vmlinux.lds\n [AVR32] rename vmlinux.lds\n [AVR32] fix command line parsing in early_parse_fbmem\n [AVR32] checkstack support\n [AVR32] Wire up USBA device\n [AVR32] add multidrive support for pio driver\n [AVR32] /sys/kernel/debug/at32ap_clk\n [AVR32] Move AT32_PM_BASE definition into pm.h\n" }, { "commit": "1ef3e36251e4edc77a48967d015a87ca3c4283ea", "tree": "2ee6c869d752c13a56ee2259d115210135f5d5de", "parents": [ "c634920abaf9c0a93266a57beff6fce9d3852cb2", "bbf275f092b1b2a9bc8a504500ec387f9ddff859" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:11:51 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:11:51 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (74 commits)\n Blackfin serial driver: pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230\n blackfin enable arbitary speed serial setting\n Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and DEBUG_KERNEL_START\n Blackfin arch: fix typo in register name\n Blackfin arch: trim the Blackfin arch MAINTAINERS list\n Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on Blackfin\n Blackfin arch: Export strcpy - occasionally get module link failures otherwise\n Blackfin arch: the load address is not safe to point to as a workaround for ANOMALY 05000281\n Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition\n Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopy\n Blackfin arch: update kgdb patch\n Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323\n Blackfin arch: Print out debug info, as early as possible\n Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out\n Blackfin arch: fix endless loop bug when a double fault happens\n Blackfin arch: Initial patch to add earlyprintk support\n Blackfin arch: add TWIx_REGBASE and SPIx_REGBASE to specific CPU header files, use the new REGBASE for board platform resources\n Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archs\n Blackfin arch: add more common defines for output sections\n Blackfin arch: cleanup IO and DMA_IO API function definitions according to other arches\n ...\n" }, { "commit": "c634920abaf9c0a93266a57beff6fce9d3852cb2", "tree": "5ac85f54905a8cd3b12b262c66189084cbff54fc", "parents": [ "6abd2c860e34add677de50e8b134f5af6f4b0893", "a991f44b79fa49b281eb078eed4a76a42101012a" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:09:32 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 19:09:32 2007 -0700" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb\n\n* \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (310 commits)\n V4L/DVB (6316): Change list_for_each+list_entry to list_for_each_entry\n V4L/DVB (6315): pvrusb2: Change list_for_each+list_entry to list_for_each_entry\n V4L/DVB (6314): saa7134: Replace list_for_each+list_entry with list_for_each_entry\n V4L/DVB (6313): ivtv: Replace list_for_each+list_entry with list_for_each_entry\n V4L/DVB (6312): cx88: Replace list_for_each+list_entry with list_for_each_entry\n V4L/DVB (6311): dvb: Replace list_for_each+list_entry with list_for_each_entry\n V4L/DVB (6308): V4L: zc0301, remove bad usage of ERESTARTSYS\n V4L/DVB (6307): V4L: w9968cf, remove bad usage of ERESTARTSYS\n V4L/DVB (6306): Few clenups for saa7134 resume code\n V4L/DVB (6305): V4L: videobuf-core.c avoid NULL dereferences in videobuf-core\n V4L/DVB (6301): pvrusb: Update DEBUGIFC sysfs to kernel 2.6.13+\n V4L/DVB (6300): CodingStyle cleanup\n V4L/DVB (6299): dvb: Add dependencies for VIDEOBUF_DVB\n V4L/DVB (6297): cx23885: remove wrong Kconfig selection of VIDEOBUF\n V4L/DVB (6296): dib0700: add support for AverMedia DVB-T Express card\n V4L/DVB (6295): saa7134: add autodetection for KWorld ATSC-115\n V4L/DVB (6293): V4L: convert struct class_device to struct device\n V4L/DVB (6292): videobuf_core init always require callback implementation\n V4L/DVB (6291): Fix: avoid oops on some SMP machines\n V4L/DVB (6290): remove videobuf_set_pci_ops\n ...\n" }, { "commit": "6abd2c860e34add677de50e8b134f5af6f4b0893", "tree": "d201de170ca4851d66dbd02046fea7d95214fad7", "parents": [ "d2c75f2f4b8be1c78f275c49e399d5a9b21ce924", "019a5f56ec195aceadada18aaaad0f67294bdaef" ], "author": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 18:57:31 2007 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Thu Oct 11 18:57:31 2007 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (67 commits)\n mmc: don\u0027t use weight32()\n pxamci: support arbitrary block size\n sdio: make the IRQ thread more resilient in the presence of bad states\n sdio: fix IRQ diagnostic message\n sdhci: remove old dma module params\n sdhci: add SDHCI_QUIRK_BROKEN_DMA quirk\n sdhci: remove DMA capability check from controller\u0027s PCI Class reg\n sdhci: fix a typo\n mmc: Disabler for Ricoh MMC controller\n sdio: adaptive interrupt polling\n mmc: pxamci: add SDIO card interrupt reporting capability\n mmc: pxamci: set proper buswidth capabilities according to PXA flavor\n mmc: pxamci: set proper block capabilities according to PXA flavor\n mmc: pxamci: better pending IRQ determination\n arm: i.MX/MX1 SDHC implements SD cards read-only switch read-back\n mmc: add led trigger\n mmc_spi host driver\n MMC core learns about SPI\n MMC/SD card driver learns SPI\n MMC headers learn about SPI\n ...\n" }, { "commit": "b08d6cb22c777c8c91c16d8e3b8aafc93c98cbd9", "tree": "139b1f2636c42698bd7b0f0ccd61f0e1b8a826ab", "parents": [ "f785a8e28b9d103c7473655743b6ac1bc3cd3a58" ], "author": { "name": "Ilpo Järvinen", "email": "ilpo.jarvinen@helsinki.fi", "time": "Thu Oct 11 17:36:13 2007 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Oct 11 17:36:13 2007 -0700" }, "message": "[TCP]: Limit processing lost_retrans loop to work-to-do cases\n\nThis addition of lost_retrans_low to tcp_sock might be\nunnecessary, it\u0027s not clear how often lost_retrans worker is\nexecuted when there wasn\u0027t work to do.\n\nSigned-off-by: Ilpo Järvinen \u003cilpo.jarvinen@helsinki.fi\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8087ebd5a121ac6bf5a8eba2459c01d3659c3e31", "tree": "31394658c138dcb130a229af03e3beefca8db642", "parents": [ "895532a166010d8d8b4d58d63d21012eced22492", "4d9e55103aec1ba7d0617cfd88412ec39e1e2d32" ], "author": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 09:06:32 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 09:06:32 2007 +1000" }, "message": "Merge branch \u0027for-2.6.24\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24\n" }, { "commit": "572afc248c33c902760f6f24a72c180f0e4f1719", "tree": "ef3680549f2bb52afd0a86ae9dbd22e9b0ee5efe", "parents": [ "bdf5d42c6e4d7aa56251b8899f60f55a88c0aaa7" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Fri Sep 21 13:05:44 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:19 2007 +0100" }, "message": "[MIPS] R1: Fix hazard barriers to make kernels work on R2 also.\n\nTested with Malta; inflates malta_defconfig by 3932 bytes. Ideally there\nshould be additional configuration to allow getting rid of this overhead\nbut that would be too much complexity at this stage of the release cycle.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "b5eb551145395382ddf302548991a5fbaabc5341", "tree": "89d8819130337b3836723527825adaf93df5d74f", "parents": [ "bd6aeeffcc0be716e4d2d1f27fb132741e345cc0" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Wed Oct 03 19:16:57 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:18 2007 +0100" }, "message": "[MIPS] Kill num_online_cpus() loops.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "bd6aeeffcc0be716e4d2d1f27fb132741e345cc0", "tree": "db8e97d4669856ed85b73b40ba65301346ca4dd1", "parents": [ "9966db25defba4e1dce263246db25237bc24479f" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Wed Oct 03 01:24:16 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:18 2007 +0100" }, "message": "[MIPS] SMP: Implement smp_call_function_mask().\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "9966db25defba4e1dce263246db25237bc24479f", "tree": "5002f2849ebcceb57f40535798aa37dfbd841875", "parents": [ "36cfbaad815908f54872a7b471e9a7a09b4084a4" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:17 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:17 2007 +0100" }, "message": "[MIPS] Make facility to convert CPU types to strings generally available.\n\nSo far /proc/cpuinfo has been the only user but human readable processor\nname are more useful than that for proc.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "36cfbaad815908f54872a7b471e9a7a09b4084a4", "tree": "5cd05b5f6aec60c591fa63926274567aaafc245a", "parents": [ "9cfde2028bc487982a4bfb0d20d2ca76366fa80d" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:16 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:16 2007 +0100" }, "message": "[MIPS] Convert list of CPU types from #define to enum.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "9cfde2028bc487982a4bfb0d20d2ca76366fa80d", "tree": "3fc934f460b6d036da3005c5514ba5c3b3fb5e93", "parents": [ "21a151d8ca3aa74ee79f9791a9d4dc370d3e0636" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Wed Feb 14 21:16:14 2007 +0000" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:15 2007 +0100" }, "message": "[MIPS] Optimize get_unaligned / put_unaligned implementations.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "21a151d8ca3aa74ee79f9791a9d4dc370d3e0636", "tree": "8556b3a32ded6a49225beb4a7aa4447cc87a0e00", "parents": [ "49a89efbbbcc178a39555c43bd59a7593c429664" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:15 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:15 2007 +0100" }, "message": "[MIPS] checkfiles: Fix \"need space after that \u0027,\u0027\" errors.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "49a89efbbbcc178a39555c43bd59a7593c429664", "tree": "93ab78ec340d3f2fe23f9f853edd0bd62dcc64bb", "parents": [ "10cc3529072d5415fb040018a8a99aa7a60190b6" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:15 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:15 2007 +0100" }, "message": "[MIPS] Fix \"no space between function name and open parenthesis\" warnings.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "10cc3529072d5415fb040018a8a99aa7a60190b6", "tree": "fe07fb5112c9c34c2aecfac982155307bc168f07", "parents": [ "aeffdbbaff133b0c3989e20af5baa091d3d0b409" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:15 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:15 2007 +0100" }, "message": "[MIPS] Allow hardwiring of the CPU type to a single type for optimization.\n\nThis saves a few k on systems which only ever ship with a single CPU type.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "3282bd3cb0c7653e604c0d3666331281ae8f74c4", "tree": "75fe2ae38bbea3810481026798940da6f53a0a5b", "parents": [ "5a860424a1bcf21655d993a7c09b36662e34d2a9" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Tue Oct 02 23:17:38 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:14 2007 +0100" }, "message": "[MIPS] Cobalt: Move reset port definition to arch/mips/cobalt/reset.c\n\nIt\u0027s only used in arch/mips/cobalt/reset.c.\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "5a860424a1bcf21655d993a7c09b36662e34d2a9", "tree": "885c436e8688ae6ade30f3873c8826f28303f41c", "parents": [ "b4126e86301cfc6863cbc74bc4500a88b7c582df" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Tue Oct 02 23:13:17 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:14 2007 +0100" }, "message": "[MIPS] Cobalt: Move UART base definition to arch/mips/cobalt/console.c\n\nThey\u0027re only used in arch/mips/cobalt/console.c.\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "b4126e86301cfc6863cbc74bc4500a88b7c582df", "tree": "45ab759f09e249b335208375d24a11c0797a200a", "parents": [ "b1df86d6e148e3be6d1e43e604b19fbb6815b8ba" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Tue Oct 02 22:54:41 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:14 2007 +0100" }, "message": "[MIPS] Cobalt: Move PCI definitions to arch/mips/pci/fixup-cobalt.c.\n\nThese PCI definitions are only used in arch/mips/pci/fixup-cobalt.c.\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "f4fae8267c152d6c319a7bfaf92ed1c2c9a2c4e8", "tree": "5c43b9e75589b86f52af11dd5c41829dbb75b6ae", "parents": [ "db813fe5a77d03b29e872da47463d2efbddc3fc2" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:12 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:12 2007 +0100" }, "message": "[MIPS] Optimize __alloc_zeroed_user_highpage implementation.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "d865bea4dace1d42995a6cf552bc4863842623f4", "tree": "df4519c1646898d3d11817976992c73647a88dac", "parents": [ "87b2335d6ef97e19ca19dbbb523673680a029e3f" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:10 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:10 2007 +0100" }, "message": "[MIPS] i8253 PIT clocksource and clockevent drivers\n\nDerived from the i386 variant with a few x86 complexities chopped off.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "7bcf7717b6a047c272410d0cd00213185fe6b99d", "tree": "81c5d6bbc2130815713e22bb5408ea80b6e1c499", "parents": [ "91a2fcc88634663e9e13dcdfad0e4a860e64aeee" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:09 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:09 2007 +0100" }, "message": "[MIPS] Implement clockevents for R4000-style cp0 count/compare interrupt\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "91a2fcc88634663e9e13dcdfad0e4a860e64aeee", "tree": "a86b936f1057207d46e5a07ed826052ff640869a", "parents": [ "90b02340dcc6ce00bf22c48f4865915f5989e5e4" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:09 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:09 2007 +0100" }, "message": "[MIPS] Consolidate all variants of MIPS cp0 timer interrupt handlers.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "90b02340dcc6ce00bf22c48f4865915f5989e5e4", "tree": "763f07fe0025ac5cd54fa361ec5d77ad76b5547c", "parents": [ "4b550488f894c899aa54dc935c8fee47bca2b7df" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:09 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:09 2007 +0100" }, "message": "[MIPS] Switch from to_tm to rtc_time_to_tm\n\nThis replaces the MIPS-specific to_tm function with the generic\nrtc_time_to_tm function. The big difference between the two functions is\nthat rtc_time_to_tm uses epoch 70 while to_tm uses 1970, so the result of\nrtc_time_to_tm needs to be fixed up.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "4b550488f894c899aa54dc935c8fee47bca2b7df", "tree": "f7ee1d0ff80542124b5fa864a30022277d703c49", "parents": [ "f5ff0a280201c9cbfb6e9eb4bafdb465c2269ed3" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:08 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:08 2007 +0100" }, "message": "[MIPS] Deforest the function pointer jungle in the time code.\n\nHard to follow who is pointing what to where and why so it\u0027s simply getting\nin the way of the time code renovation.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "05dc8c02bf40090e9ed23932b1980ead48eb8870", "tree": "ebf34c90f31b52e1a0c1e6185a50a1470c1b3677", "parents": [ "112b20a1e849aec8077bbf11fc3de338b62f363a" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:08 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:08 2007 +0100" }, "message": "[MIPS] ARC: Get rid of mips_machgroup\n\nThis has not been any serious user of this ill conceived thing since the\noriginal invention in like \u002795.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "baf22c1e7aedf264e264b15d2595e5e76564bd4e", "tree": "6983687e9e1a7442247d418207bfb36254167214", "parents": [ "21c854dcbd7698bf723676a552968040e2813490" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:07 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:07 2007 +0100" }, "message": "[MIPS] Split up war.h\n\nIt was getting a little big, ugly and a primary source for merge conflicts.\nAlso the old method was a bit too forgiving in that the workaround did\ndefault to off, so now there is an explicit #error forcing platform\nmaintainers to think if they should enable a workaround for a particular\nplatform.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "34cc662f8aae0ce1db5c64d55a39a5081f9e3cd8", "tree": "69447356fb052c8aa3a74154f2dee082b64f275d", "parents": [ "25e5fb97419f73d39b37e9f73f9492c394de07b2" ], "author": { "name": "Aurelien Jarno", "email": "aurelien@aurel32.net", "time": "Tue Sep 25 15:42:09 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:07 2007 +0100" }, "message": "[MIPS] Add gpio support to the BCM47XX platform\n\nAdd GPIO support to the BCM47XX platform. It will be used by a GPIO\nLED driver.\n\nSigned-off-by: Aurelien Jarno \u003caurelien@aurel32.net\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "2f56cfdd812a17623483d3dfa3370a2e6282b245", "tree": "624e2bfccf0b0ee02cd94343acdf5d3364cb002e", "parents": [ "df78b5c8faa72b3c04f82faab126de93af178348" ], "author": { "name": "Aurelien Jarno", "email": "aurelien@aurel32.net", "time": "Wed Sep 05 08:59:34 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:06 2007 +0100" }, "message": "[MIPS] Move ARC code into arch/mips/fw/arc\n\nMove the ARC code to arch/mips/fw/arc from arch/mips/arc.\n\nSigned-off-by: Aurelien Jarno \u003caurelien@aurel32.net\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "df78b5c8faa72b3c04f82faab126de93af178348", "tree": "769f342740526699d116b7a89bd0dba34b381845", "parents": [ "cc6e8e0812cf95aea397c457ff48de2ac069614f" ], "author": { "name": "Aurelien Jarno", "email": "aurelien@aurel32.net", "time": "Wed Sep 05 08:58:26 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:05 2007 +0100" }, "message": "[MIPS] Move CFE code into arch/mips/fw/cfe\n\nMove the platform independent part of the CFE code to arch/mips/fw/cfe from\narch/mips/sibyte/cfe.\n\nSigned-off-by: Aurelien Jarno \u003caurelien@aurel32.net\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "cc6e8e0812cf95aea397c457ff48de2ac069614f", "tree": "da0527908dceed57cd10204034a6b2c888a34863", "parents": [ "641e97f318870921d048154af6807e46e43c307a" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:05 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:05 2007 +0100" }, "message": "[MIPS] Remove IP27 specific structures from struct cpuinfo_mips\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "641e97f318870921d048154af6807e46e43c307a", "tree": "6e0984a1bc8932db848be3fdb104a92c97fe341a", "parents": [ "424b28ba4d25fc41abdb7e6fa90e132f0d9558fb" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:05 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:05 2007 +0100" }, "message": "[MIPS] Sibyte: Replace SB1 cachecode with standard R4000 class cache code.\n\nIt may not be perfect yet but the SB1 code is badly borken and has\nhorrible performance issues.\n\nDownside: This seriously breaks support for pass 1 parts of the BCM1250\nwhere indexed cacheops don\u0027t work quite reliable but I seem to be the\nlast one on the planet with a pass 1 part anyway.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "d5ab1a6910fe850fa092888f210cf6c43136a7ab", "tree": "142f9f35f0d9fc6e675caf42a1cd8a82b56aa8e9", "parents": [ "718f05f6ddc171a90fb7a277be6f6f65b4ca82be" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Thu Sep 13 23:51:26 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:04 2007 +0100" }, "message": "[MIPS] Add GT641xx IRQ routines.\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "718f05f6ddc171a90fb7a277be6f6f65b4ca82be", "tree": "0f742721dd06f438489e9bf2babb55413baaaf63", "parents": [ "d80c1c0b2207ba326b2c06249dfebddf8ac863bd" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Wed Sep 12 23:19:45 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:04 2007 +0100" }, "message": "[MIPS] GT64120: Remove unused definitions\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "d80c1c0b2207ba326b2c06249dfebddf8ac863bd", "tree": "6fedbb8d5c70b6c67e47a95cbb11c4a889b9bb2b", "parents": [ "ec70f65e3b5309e7ac8b5508ff5657050c92b913" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Thu Sep 13 11:04:04 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:04 2007 +0100" }, "message": "[MIPS] i8295 cleanups.\n\n o Move i8259 function declarations to include/asm-mips/i8259.h\n o Make i8259.c functions static where possible.\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "bcb0fd94633afde9c1f4f8aca43141ba2c78f04b", "tree": "690cb6b8f61e05eaa50ea36ce809507fbacdf1ae", "parents": [ "7ca16d269a1a4b96d98968b48f137977bcab1522" ], "author": { "name": "Thiemo Seufer", "email": "ths@networkno.de", "time": "Wed Sep 05 17:44:50 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:03 2007 +0100" }, "message": "[MIPS] Define known MIPS ISA overrides for Sibyte and Excite boards.\n\nSigned-Off-By: Thiemo Seufer \u003cths@networkno.de\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "7ca16d269a1a4b96d98968b48f137977bcab1522", "tree": "4a7956a0bad2e9f156234f0de96a77edbb8e3774", "parents": [ "abb4ae4630633573862934173e5f506771c5d6b1" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:03 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:03 2007 +0100" }, "message": "[MIPS] floppy: Rewrite fd_cacheflush() to use dma_cache_sync().\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "abb4ae4630633573862934173e5f506771c5d6b1", "tree": "a6051f682e2a7f3a6b907767286e504b0e9404a5", "parents": [ "a02eb8da02741f43efb6f06adf534f9f2b913d80" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:03 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:03 2007 +0100" }, "message": "[MIPS] PCI: Always enable CONFIG_PCI_DOMAINS\n\nThe cost is just too low.\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "a02eb8da02741f43efb6f06adf534f9f2b913d80", "tree": "3913502d4c3e371a872fdcc1cf1484a8eb366dd4", "parents": [ "4e45171c4e31578157189ca22cfb7b2bcc5f69f2" ], "author": { "name": "Atsushi Nemoto", "email": "anemo@mba.ocn.ne.jp", "time": "Tue Aug 28 00:28:09 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:02 2007 +0100" }, "message": "[MIPS] tx4927: Cleanup unused macros and non-standard IO accessors.\n\nThis patch removes many unused constants, replaces non-standard IO\naccessors with standard ones, and kills terrible tx4927_mips.h file.\n\nSigned-off-by: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "1c0c13eb935c95fd2ca0b0aca6dd4860487fb242", "tree": "a274a6e2e56f519900fb35c544ddf279f38ca8d6", "parents": [ "ea202c632a52c4a83f1bd82d8d06bc8e04f2689a" ], "author": { "name": "Aurelien Jarno", "email": "aurelien@aurel32.net", "time": "Tue Sep 25 15:40:12 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:02 2007 +0100" }, "message": "[MIPS] Add support for BCM47XX CPUs.\n\nNote that the BCM4710 does not support the wait instruction, this\nis not a mistake in the code.\n \nIt originally comes from the OpenWrt patches.\n \nCc: Michael Buesch \u003cmb@bu3sch.de\u003e\nCc: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCc: Florian Schirmer \u003cjolt@tuxbox.org\u003e\nSigned-off-by: Aurelien Jarno \u003caurelien@aurel32.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "ea202c632a52c4a83f1bd82d8d06bc8e04f2689a", "tree": "1815b69d45b99d8f20d0fb33ba7b34b8319f2507", "parents": [ "1f21d2bde0046e959b53756f74d96dfd040a803b" ], "author": { "name": "Thomas Bogendoerfer", "email": "tsbogend@alpha.franken.de", "time": "Sat Aug 25 11:01:50 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:00 2007 +0100" }, "message": "[MIPS] JAZZ fixes\n\n- restructured irq handling\n- switched vdma to use memory allocated via get_free_pages\n- setup platform devices for serial, jazz_esp and jazzsonic\n- fixed cmos rtc access\n\nSigned-off-by: Thomas Bogendoerfer \u003ctsbogend@alpha.franken.de\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "1f21d2bde0046e959b53756f74d96dfd040a803b", "tree": "5ca1a0319982f1e665e57f22bd1dae1d90b07e35", "parents": [ "0caf583398309398ec05fc76bff15c711e9f936d" ], "author": { "name": "Brian Murphy", "email": "brm@murphy.dk", "time": "Tue Aug 21 22:34:16 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:00 2007 +0100" }, "message": "[MIPS] Add back support for LASAT platforms\n\nSigned-off-by: Brian Murphy \u003cbrian@murphy.dk\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "0caf583398309398ec05fc76bff15c711e9f936d", "tree": "13cb80432731ea99f9a7a5cd22484e21a86d31e0", "parents": [ "4c6d0fc2f6ce44161f3fac3b34d262c0dd06cf0c" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Thu Aug 16 23:15:42 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:00 2007 +0100" }, "message": "[MIPS] fix ABI check in include/asm-mips/arv/hinv.h\n\nFix ABI check in include/asm-mips/arv/hinv.h\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "4c6d0fc2f6ce44161f3fac3b34d262c0dd06cf0c", "tree": "bb712f7b4c3e25ca43fc50c15e972fe9fbe02001", "parents": [ "ddcf4efb7a5a38c2d82decbdfd99c43bbf226551" ], "author": { "name": "Yoichi Yuasa", "email": "yoichi_yuasa@tripeaks.co.jp", "time": "Thu Aug 16 22:56:04 2007 +0900" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:46:00 2007 +0100" }, "message": "[MIPS] remove unused include/asm-mips/ip32/machine.h\n\nSigned-off-by: Yoichi Yuasa \u003cyoichi_yuasa@tripeaks.co.jp\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "054c51b4368648406f487f54b7ed6ba75bbb3f8b", "tree": "89db2ea5e05fd95bff686d24383897332276e98b", "parents": [ "adff90a9333004d5459823665e8bcf6cb9214f79" ], "author": { "name": "Franck Bui-Huu", "email": "vagabon.xyz@gmail.com", "time": "Thu Feb 15 14:21:36 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:45:59 2007 +0100" }, "message": "[MIPS] Rename CONFIG_BUILD_ELF64 into KBUILD_64BIT_SYM32\n\nThis patch renames it for 3 reasons:\n\n - \"CONFIG\" pattern is used by Kconfig. Now this macro is\n no more defined by Kconfig but by Kbuild itself make this\n clear by translating \"CONFIG\" into \"KBUILD\".\n\n - \"ELF32\" word is improper because it is irrelevant to ELF\n format and it makes confusion with CONFIG_BOOT_ELF32. So\n translate it with SYM32.\n\n - Add \"64BIT\" part to make clear that this macro implies a\n 64 bits kernel.\n\nSigned-off-by: Franck Bui-Huu \u003cfbuihuu@gmail.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "adff90a9333004d5459823665e8bcf6cb9214f79", "tree": "d4eadd84faed02ef8514cca0e22756efbbfe5d2f", "parents": [ "8c67316e706cabc2145d6c8e97f0bd8f2a86d8a1" ], "author": { "name": "Franck Bui-Huu", "email": "fbuihuu@gmail.com", "time": "Thu Feb 15 12:06:48 2007 +0100" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:45:59 2007 +0100" }, "message": "[MIPS] Automatically set CONFIG_BUILD_ELF64\n\nWe do not rely on user anymore to setup this config correctly.\nInstead we make our choice depending on the load address.\n\nIf we want to force Kbuild to use ELF64 format whatever\nthe load address we can still do:\n\n $ make BUILD_ELF32\u003dno\n\nSigned-off-by: Franck Bui-Huu \u003cfbuihuu@gmail.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "f571eff0a24ed97a919f2b61bb4afdeab4b43002", "tree": "e9d6c597fafca02720f000cf795a37f2d163f10f", "parents": [ "bbf25010f1a6b761914430f5fca081ec8c7accd1" ], "author": { "name": "Kevin D. Kissell", "email": "kevink@mips.com", "time": "Fri Aug 03 19:38:03 2007 +0200" }, "committer": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Oct 11 23:45:57 2007 +0100" }, "message": "[MIPS] IRQ Affinity Support for SMTC on Malta Platform\n \nSigned-off-by: Kevin D. Kissell \u003ckevink@mips.com\u003e\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\n" }, { "commit": "895532a166010d8d8b4d58d63d21012eced22492", "tree": "708097789ac9cb2670407b12ee37b8653385b5e6", "parents": [ "ad656887e22390c64276e0a0057541aec701422c", "e1eea9fa00da50ed3dfb64ce669e9ae0b70c0629" ], "author": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 08:40:13 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Fri Oct 12 08:40:13 2007 +1000" }, "message": "Merge branch \u0027for-2.6.24\u0027 of git://git.secretlab.ca/git/linux-2.6-mpc52xx into for-2.6.24\n" }, { "commit": "26bcb879c03254545a19c6700fe5bcef6f21e7b1", "tree": "dc35f1a7d7860fe0de268ff92189ff0884b689d3", "parents": [ "842c19ad6fc0dbd9ac9d2f8527466201802934cf" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:54:00 2007 +0200" }, "message": "ide: add ide_set{_max}_pio() (take 4)\n\n* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags\n and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.\n\n* Add set_pio_mode_abuse() for checking if host driver has a non-standard\n -\u003etuneproc() implementation and use it in do_special().\n\n* Add ide_set_pio() for setting PIO mode (it uses hwif-\u003epio_mask to find\n the maximum PIO mode supported by the host), also add ide_set_max_pio()\n wrapper for ide_set_pio() to use for auto-tuning. Convert users of\n -\u003etuneproc to use ide_set{_max}_pio() where possible. This leaves only\n do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as\n a direct users of -\u003etuneproc.\n\n* Remove no longer needed ide_get_best_pio_mode() calls and printk-s\n reporting PIO mode selected from -\u003etuneproc implementations.\n\n* Rename -\u003etuneproc hook to -\u003eset_pio_mode and make \u0027pio\u0027 argument const.\n\n* Remove stale comment from ide_config_drive_speed().\n\nv2:\n* Fix \"ata_\" prefix (Noticed by Jeff).\n\nv3:\n* Minor cleanups/fixups per Sergei\u0027s suggestions.\n\nv4:\n* Fix compile problem in drivers/ide/pci/cmd640.c\n (Noticed by Andrew Morton).\n\n* Improve some -\u003eset_pio_mode comments.\n\nReviewed-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Jeff Garzik \u003cjeff@garzik.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "f212ff28f08e4ddcef9f25b13463c45cc4204a0c", "tree": "e8fe63044c2ebec404689cbd55d75497aa77da0a", "parents": [ "3160d5416f39da9d9221fec7cb9d64399b706bbc" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "message": "ide: move ide_rate_filter() calls to the upper layer (take 2)\n\n* Move ide_rate_filter() calls from host drivers to IDE core.\n\n* Make ide_rate_filter() static.\n\n* Make \u0027speed\u0027 argument of -\u003espeedproc const.\n\nv2:\n* Fix it8213_tune_chipset() comment.\n\nThere should be no functionality changes caused by this patch.\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7670df73fba373d19471a2ebedb3302ea0607be0", "tree": "a47b896a9d9a652ca71cc33709f0f73253ea5f9c", "parents": [ "a8028fcb485522c0d7de9c5423812de9224b37c9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:59 2007 +0200" }, "message": "ide: mode limiting fixes for user requested speed changes\n\n* Add an extra argument to ide_max_dma_mode() for passing requested transfer\n mode. Use it as an upper limit when finding the best DMA for device/host.\n\n* Rename ide_max_dma_mode() to ide_find_dma_mode() and at the same time add\n ide_max_dma_mode() wrapper which passes XFER_UDMA_6 as a requested mode to\n ide_find_dma_mode(). Also add inline ide_find_dma_mode() version for\n CONFIG_BLK_DEV_IDEDMA\u003dn case.\n\n* Pass requested transfer mode from ide_find_dma_mode() to ide_get_mode_mask()\n to avoid false warning from eighty_ninty_three().\n\n* Use ide_find_dma_mode() to limit the user requested transfer mode in\n ide_rate_filter(). Also limit the requested mode by host max PIO mode.\n\n\nAbove changes make ide_rate_filter() to:\n\n* Clip desired transfer mode down if it is invalid (values 0x0F, 0x13-0x19\n and 0x25-0x39, values \u003e 0x46 were already clipped down, same for values\n 0x25-0x39 but iff UDMA was not supported by the host).\n\n* Clip desired transfer mode down if it is currently unsupported by IDE core\n (PIO6 and MWDMA3-4, the latter were already clipped down but iff UDMA was\n not supported by the host).\n\n* Clip desired transfer mode down according to the host capabilities\n (UDMA modes were already clipped down but MWDMA/SWDMA/PIO weren\u0027t,\n also -\u003eatapi_dma flag was not respected).\n\n* Clip desired transfer mode down according to the device capabilities\n (except PIO modes for now which require mode work) - shouldn\u0027t be a\n problem since ide_set_xfer_rate() is called _after_ device has accepted\n given transfer mode.\n\nand also result in a number of host driver specific bugfixes:\n\n* icside\n - clip unsupported PIO5 mode down\n - fix unsupported/invalid modes being set in drive-\u003ecurrent_speed\n\n* ide-cris\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - clip DMA modes down for ATAPI devices\n - fix BUG() on unsupported/invalid modes\n\n* au1xxx-ide\n - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2\n (if BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA\u003dn) modes down\n\n* aec62xx\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - clip DMA modes down for ATAPI devices\n - fix 0x00 being programmed as PIO timing for unsupported/invalid modes\n - fix unsupported/invalid modes being set on the device\n\n* alim15x3\n - clip DMA modes down for ATAPI devices (chipset revision \u003d\u003d 0x20 only)\n - fix theoretical OOPS for 0x0F mode\n - fix unsupported/invalid modes being set on the device\n\n* amd74xx\n - clip unsupported SWDMA0-2 (on COBRA_7401 revs \u003c\u003d 7) modes down\n - fix random PIO timings being set for unsupported/invalid modes\n - fix unsupported/invalid modes being set on the device\n\n* atiixp\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix cached MWDMA mode being cleared for unsupported/invalid modes\n - fix PIO{0,2} timings being programmed for unsupported/invalid modes\n - fix theoretical OOPS for PIO5-6 and 0x0F modes\n - fix unsupported/invalid modes being set on the device\n\n* cmd64x\n - clip unsupported SWDMA0-2 modes down\n\n* cs5530\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix unsupported/invalid modes being set on the device\n - fix BUG() on unsupported/invalid modes\n (which happened if the device accepted the setting)\n\n* cs5535\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix unsupported/invalid modes being set on the device\n - fix theoretical OOPS for PIO5-6 and 0x0F modes\n\n* hpt34x\n - clip DMA modes down for ATAPI devices\n - fix invalid timings being programmed for unsupported/invalid modes\n - fix unsupported/invalid modes being set on the device\n\n* hpt366\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix PIO0 timings being programmed for unsupported/invalid modes\n - fix DMA timings being cleared for MWDMA3-4 and 0x25-0x39 modes\n - fix unsupported/invalid modes being set on the device\n\n* it8213\n - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down\n\n* it821x\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - clip DMA modes down for ATAPI devices\n (chipset in smart mode and revision 0x10 in pass-through mode)\n\n* jmicron\n - clip unsupported SWDMA0-2 modes down\n - fix unsupported/invalid modes being set on the device\n\n* pdc202xx_new\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix unsupported/invalid modes being set on the device\n\n* pdc202xx_old\n - clip unsupported PIO5 mode down\n - fix incorrect timings being set for unsupported/invalid modes\n - fix unsupported/invalid modes being set on the device\n\n* piix\n - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down\n\n* sc1200\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix unsupported/invalid modes being set on the device\n - fix BUG() on unsupported/invalid modes\n (which happened if the device accepted the setting)\n\n* scc_pata\n - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2 modes down\n\n* serverworks\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix DMA/UDMA timings/settings being cleared for unsupported/invalid modes\n - fix unsupported/invalid modes being set on the device\n\n* siimage\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - clip DMA modes down for ATAPI devices (SATA chipsets)\n\n* sis5513\n - clip unsupported PIO5 mode down\n - fix BUG() on unsupported/invalid modes\n\n* sl82c105\n - clip unsupported SWDMA0-2 modes down\n\n* slc90e66\n - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down\n\n* tc86c001\n - clip unsupported PIO5 and SWDMA0-2 modes down\n - fix PIO0 timings being programmed for PIO5/0x0F/SWDMA0-2/0x13-0x19 modes\n - fix invalid 0x00 DMA timing being programmed for MWDMA3-4/0x25-0x39 modes\n - fix unsupported/invalid modes being set on the device\n\n* triflex\n - clip unsupported PIO5 mode down\n\n* via82cxxx\n - fix random PIO timings being set for unsupported/invalid modes\n - fix unsupported/invalid modes being set on the device\n\n* pmac\n - clip unsupported PIO5 and SWDMA0-2 modes down\n\n* cmd640/ht6560b\n - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA\u003dy)\n - fix PIO5 being clipped to PIO4 (if CONFIG_BLK_DEV_IDEDMA\u003dn)\n\n* opti621\n - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA\u003dy)\n - clip unsupported PIO4 to PIO3 (if CONFIG_BLK_DEV_IDEDMA\u003dn)\n\n\nWhile at it:\n\n* Use ide_rate_filter() in cs5520.c::cs5520_tune_chipset().\n\n* Remove no longer needed checks from hpt366.c::hpt3{6,7}x_tune_chipset().\n\nAcked-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "5e32132befa5d2cefadf3141fee0bbb40cd11f0e", "tree": "7bf2002e49b169d24b87a8fe71364875e04d1e90", "parents": [ "8cb1f567f4c0a2fde9cbf77c2af888a28cab3423" ], "author": { "name": "Shaohua Li", "email": "shaohua.li@intel.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "message": "ide: hook ACPI _PSx method to IDE power on/off\n\nACPI spec defines the sequence of IDE power on/off:\nPowering down:\n\tCall _GTM.\n\tPower down drive (calls _PS3 method and turns off power planes).\nPowering up:\n\tPower up drive (calls _PS0 method if present and turns on power planes).\n\tCall _STM passing info from _GTM (possibly modified), with ID data from\n\teach drive.\n\tInitialize the channel.\n\tMay modify the results of _GTF.\n\tFor each drive:\n\t\tCall _GTF.\n\t\tExecute task file (possibly modified).\nThis patch adds the missed _PS0/_PS3 methods call.\n\nSigned-off-by: Shaohua Li \u003cshaohua.li@intel.com\u003e\nAcked-by: Len Brown \u003clen.brown@intel.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "b4e44369a380c1836d0983c2a5011099b7b26eb1", "tree": "c7be9a68f98d908c7822d65dcec4b3c21d9d7955", "parents": [ "7cfa7168f7a7730abf1aa2af4a7596d24edd4c21" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu Oct 11 23:53:58 2007 +0200" }, "message": "hpt366: MWDMA filter for SATA cards (take 2)\n\nThe Marvell bridge chips used on HighPoint SATA cards do not seem to support\nthe MWDMA modes (at least that could be seen in their so-called drivers :-),\nso the driver needs to account for this -- to achieve this:\n\n- add mdma_filter() method from the original patch by Bartlomiej Zolnierkiewicz\n with his consent;\n\n- install the method for all chips to only return empty mask if a SATA drive\n is detected on HPT372{AN]/374 chips...\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "c3f8f65046127f471d0b6193a1923185b354c011", "tree": "69e9178d13f9c1e02387f33fbff38fff612eb12e", "parents": [ "18f65c793a5106b9f99822ef248e71582db03386" ], "author": { "name": "Richard Purdie", "email": "rpurdie@rpsys.net", "time": "Mon Sep 03 00:27:00 2007 +0100" }, "committer": { "name": "Richard Purdie", "email": "rpurdie@rpsys.net", "time": "Thu Oct 11 22:24:13 2007 +0100" }, "message": "backlight: Convert corgi backlight driver into a more generic driver\n\nConvert the corgi backlight driver to a more generic version\nso it can be reused by other code rather than being Zaurus/PXA\nspecific.\n\nSigned-off-by: Richard Purdie \u003crpurdie@rpsys.net\u003e\n" }, { "commit": "780513ecb80ea0934fc6833efc4f5ed9ab4ff9bb", "tree": "472f58401137931b034e02e5265c49750d18480d", "parents": [ "1ca91cd0336b05b91c51b403c9ed9d297813533f" ], "author": { "name": "Boaz Harrosh", "email": "bharrosh@panasas.com", "time": "Thu Oct 11 21:26:08 2007 +0200" }, "committer": { "name": "Jens Axboe", "email": "jens.axboe@oracle.com", "time": "Thu Oct 11 21:26:08 2007 +0200" }, "message": "[BLOCK] Fix failing compile with BLK_DEV_IO_TRACE\u003dn\n\nI get a compilation error in sglist-arch branch\nwith BLK_DEV_IO_TRACE\u003dn:\n\n CC block/compat_ioctl.o\n/usr0/export/dev/bharrosh/git/pub/linux-2.6-block/block/compat_ioctl.c: In\nfunction ?compat_blk_trace_setup?:\n/usr0/export/dev/bharrosh/git/pub/linux-2.6-block/block/compat_ioctl.c:568:\nerror: expected expression before ?do?\nmake[2]: *** [block/compat_ioctl.o] Error 1\n\nSigned-off-by: Jens Axboe \u003cjens.axboe@oracle.com\u003e\n" }, { "commit": "0bfd5df53a99809f60e12bda9c5ef5d8f14ef2e3", "tree": "91e769edc55db8fc8fc26942686ea2f74e206da3", "parents": [ "ab9683ca8162f9d4b38e04b956278d8cc647dcfc" ], "author": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Thu Oct 11 09:13:41 2007 -0500" }, "committer": { "name": "Kumar Gala", "email": "galak@kernel.crashing.org", "time": "Thu Oct 11 09:14:31 2007 -0500" }, "message": "[POWERPC] 85xx: Killed \u003casm/mpc85xx.h\u003e\n\nasm-powerpc/mpc85xx.h was really a hold over from arch/ppc. Now that\nmore decoupling has occurred we can remove \u003casm/mpc85xx.h\u003e and some of\nits legacy.\n\nAs part of this we moved the definition of CPM_MAP_ADDR into cpm2.h\nfor 85xx platforms. This is a stop gap until drivers stop using\nCPM_MAP_ADDR.\n\nSigned-off-by: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\n" }, { "commit": "87a72f9e171e558a0288aa83ef1dc6ae4af32224", "tree": "7b5102ebef8b8405d83a141163f08d1a0a2c9e46", "parents": [ "64f2758514e3bad19cab03d22851ab37654399a4" ], "author": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Thu Oct 04 14:18:01 2007 +1000" }, "committer": { "name": "Paul Mackerras", "email": "paulus@samba.org", "time": "Thu Oct 11 21:37:50 2007 +1000" }, "message": "[POWERPC] Fix performance monitor on machines with logical PVR\n\nSome IBM machines supply a \"logical\" PVR (processor version register)\nvalue in the device tree in the cpu nodes rather than the real PVR.\nThis is used for instance to indicate that the processors in a POWER6\npartition have been configured by the hypervisor to run in POWER5+\nmode rather than POWER6 mode. To cope with this, we call identify_cpu\na second time with the logical PVR value (the first call is with the\nreal PVR value in the very early setup code).\n\nHowever, POWER5+ machines can also supply a logical PVR value, and use\nthe same value (the value that indicates a v2.04 architecture\ncompliant processor). This causes problems for code that uses the\nperformance monitor (such as oprofile), because the PMU registers are\ndifferent in POWER6 (even in POWER5+ mode) from the real POWER5+.\n\nThis change works around this problem by taking out the PMU\ninformation from the cputable entries for the logical PVR values, and\nchanging identify_cpu so that the second call to it won\u0027t overwrite\nthe PMU information that was established by the first call (the one\nwith the real PVR), but does update the other fields. Specifically,\nif the cputable entry for the logical PVR value has num_pmcs \u003d\u003d 0,\nnone of the PMU-related fields get used.\n\nSo that we can create a mixed cputable entry, we now make cur_cpu_spec\npoint to a single static struct cpu_spec, and copy stuff from\ncpu_specs[i] into it. This has the side-effect that we can now make\ncpu_specs[] be initdata.\n\nUltimately it would be good to move the PMU-related fields out to a\nseparate structure, pointed to by the cputable entries, and change\nidentify_cpu so that it saves the PMU info pointer, copies the whole\nstructure, and restores the PMU info pointer, rather than identify_cpu\nhaving to list all the fields that are *not* PMU-related.\n\nSigned-off-by: Paul Mackerras \u003cpaulus@samba.org\u003e\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\n" }, { "commit": "bb7aa6d47fcd4f9ab18b4ade2ba078f7719f74ca", "tree": "f44d5d49cf4d95c57e067bd004fe99d072625d7d", "parents": [ "82c54f864fea26c4c44f27e2b4c4d9a811dde299" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Wed Oct 03 15:05:20 2007 +0200" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Thu Oct 11 13:32:56 2007 +0200" }, "message": "[AVR32] Don\u0027t use __builtin_xchg()\n\nThe implementation of __builtin_xchg() in at least some versions of\navr32 gcc is buggy. Rather than find out exactly which versions that\nhave this bug, let\u0027s just avoid the problem altogether by implementing\nxchg() in inline assembly.\n\nAlso, in most architectures, xchg() seems to imply a memory barrier,\nwhile the existing avr32 implementation did not. This patch also fixes\nthat discrepancy.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "a7ff43b808f077e7aae2772b2f1a06a39e6b0cf8", "tree": "b8de5edc8a8a37e8e864b0861c67e9c0451b027c", "parents": [ "af8184718a322ae589efa583aa69ffdae61bf266" ], "author": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Sat Sep 22 23:31:39 2007 +0200" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Thu Oct 11 13:32:55 2007 +0200" }, "message": "[AVR32] Ignore a few irrelevant syscalls\n\nIgnore a few syscalls that are irrelevant because they\u0027re either old,\ndepends on NUMA or depends on SMP.\n\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" }, { "commit": "af8184718a322ae589efa583aa69ffdae61bf266", "tree": "7324ba9e6a14e78b89b703bea7d0594a0ae9ef6e", "parents": [ "193fdd1a99db8623697cb18a13dbcaa4eadbb1f2" ], "author": { "name": "Kristoffer Nyborg Gregertsen", "email": "kngregertsen@norway.atmel.com", "time": "Fri Aug 17 16:59:57 2007 +0200" }, "committer": { "name": "Haavard Skinnemoen", "email": "hskinnemoen@atmel.com", "time": "Thu Oct 11 13:32:49 2007 +0200" }, "message": "[AVR32] SMC configuration in clock cycles\n\nThis patch makes the SMC configuration take timings in clock cycles\ninstead of nanoseconds. A function to calculate timings in clock\ncycles is added.\n\nThis patch removes the rounding troubles of the previous SMC\nconfiguration method.\n\n[hskinnemoen@atmel.com: fix atstk1002/atngw100 flash config]\nSigned-off-by: Kristoffer Nyborg Gregertsen \u003cgregerts@stud.ntnu.no\u003e\nSigned-off-by: Haavard Skinnemoen \u003chskinnemoen@atmel.com\u003e\n" } ], "next": "8251b4c481bca72568e9c1042ea11189838e5f6d" }