)]}' { "log": [ { "commit": "faa45d7e267abc48fd9010fcf7bce4d2c0ade8d5", "tree": "7aed3475bdb9a574981f4ba003147ea52e7bb934", "parents": [ "c743a3995e3352ebef2c470996df2796aa5a7509" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Sat Aug 11 22:15:53 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Sun Aug 12 12:40:02 2012 -0700" }, "message": "Revert \"msm: clock-8974: Set GCC_BOOT_CLOCK_* registers to not force-on clocks\"\n\nThe GCC_BOOT_CLOCK_* register forces on certain USB and Krait\nclocks. Clearing these registers is causing unclocked accesses\nor possibly removing the clock from under the CPU. Temporarily\nleave these registers alone.\n\nThis reverts commit fc3c55c65927f977185969f9b01b4b6e391f78ac.\n\nChange-Id: I32e5dbcce94c931e1c56a42483e6cdeca479f055\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "c743a3995e3352ebef2c470996df2796aa5a7509", "tree": "8d4ffd6f8662149d9b81f1ee93eea82462b10032", "parents": [ "91c0745974fe40d42262670798f07fb2dc7fa7d1", "9a9b6f071f3c35e8e2d3aa8d5dd52f49f841b4f6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Aug 12 05:54:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Aug 12 05:54:07 2012 -0700" }, "message": "Merge \"msm: clock-8974: Route measured clocks to test pin\" into msm-3.4" }, { "commit": "91c0745974fe40d42262670798f07fb2dc7fa7d1", "tree": "3a8e78b48c67e19c887b303a0a12c61a98eb4df6", "parents": [ "321ed7b5ba75384e62d5a970440fc8bfb24135db", "ce52ef23447938c626f8f657a3b2f2106e1e73b4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Aug 12 01:28:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Aug 12 01:28:53 2012 -0700" }, "message": "Merge \"msm: Add support for thermal monitor on msm8974\" into msm-3.4" }, { "commit": "9a9b6f071f3c35e8e2d3aa8d5dd52f49f841b4f6", "tree": "b41b2aca5491e8d8b824aaf04a4d14950ecb44c0", "parents": [ "321ed7b5ba75384e62d5a970440fc8bfb24135db" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Aug 07 23:12:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Aug 12 01:04:48 2012 -0700" }, "message": "msm: clock-8974: Route measured clocks to test pin\n\nThis allows the clock selected for measurement to be observed\nusing test equipment attached to the PLL_TEST pin on the MSM.\n\nChange-Id: I91384690e0979cbd51d5fe2ff417ceb711d01a11\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "ce52ef23447938c626f8f657a3b2f2106e1e73b4", "tree": "5f9fd9466b1b7007b7d3f1cfd02dfff7da3e508b", "parents": [ "8d8220635e008ca5615519d1532d251039320cce" ], "author": { "name": "Eugene Seah", "email": "eseah@codeaurora.org", "time": "Thu Jul 12 12:40:38 2012 -0600" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 21:41:21 2012 -0600" }, "message": "msm: Add support for thermal monitor on msm8974\n\nAdd thermal monitoring and mitigation to kernel boot on msm8974\nto prevent thermal conditions during boot time.\n\nChange-Id: I9db10a4a69772fdcb8f2a450044ce446da8b593c\nSigned-off-by: Eugene Seah \u003ceseah@codeaurora.org\u003e\n" }, { "commit": "321ed7b5ba75384e62d5a970440fc8bfb24135db", "tree": "4f7123b38d33c7aa758506768c9107d1c4f9f21e", "parents": [ "775c75ea3395c6802679dd5b55494165c17e7b46", "ab7aafae3aac08a724d94873bcd103952e464ac4" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 20:32:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 20:32:04 2012 -0700" }, "message": "Merge \"drivers: qpnp-pin: Update subtype values to match hardware\" into msm-3.4" }, { "commit": "775c75ea3395c6802679dd5b55494165c17e7b46", "tree": "82103f7bbee2b71886d672df344d915c24c2982f", "parents": [ "8d8220635e008ca5615519d1532d251039320cce", "085af6fbaf1413c1fc5e8c719a72d3b413b52721" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 20:32:02 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 20:32:02 2012 -0700" }, "message": "Merge \"Revert \"msm: copper: Switch on bus scaling for copper\"\" into msm-3.4" }, { "commit": "8d8220635e008ca5615519d1532d251039320cce", "tree": "4cf438678373d05178de679b8e6d29b04417f965", "parents": [ "71190299c53b853b9d86f313f58584073369849e", "0012058c4482404516320af43169016d3375b235" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 19:02:54 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 19:02:54 2012 -0700" }, "message": "Merge changes I32c23f62,Ieb0b8564,I34c528d9,I1ca40e1f,I33c4d3ad into msm-3.4\n\n* changes:\n coresight: implement stm hardware event and port enable sysfs nodes\n coresight: enable stm logging for ftrace events and printk\n coresight: implement coresight abort\n coresight: coresight tmc driver\n coresight: add coresight devices to msm8974 device tree\n" }, { "commit": "71190299c53b853b9d86f313f58584073369849e", "tree": "cbd2e949ebf088a91b8a424dec6e13bfac895c60", "parents": [ "b864465c1c9c73d61c184f509ca600e129543ff5", "e6440cf34f5ff205dc204cab5a2438a2053b5cda" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 19:02:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 19:02:52 2012 -0700" }, "message": "Merge \"arm/dt: pm8941: Add additional VADC channel nodes\" into msm-3.4" }, { "commit": "b864465c1c9c73d61c184f509ca600e129543ff5", "tree": "8f77bcd1bfc3695b72d2f45713e6d6452f069b84", "parents": [ "7f46f90e24ec88f96a5d0d708d2e4eb4456ce326", "5bbcb0c01df009ad7a857eed7539ed18918aae28" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 17:20:28 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 17:20:28 2012 -0700" }, "message": "Merge changes I469c366b,I3c2f68c8 into msm-3.4\n\n* changes:\n ASoC: wcd9310: fix TRRS override\n ASoC: wcd9310: make CFILT adjust time as a module parameter\n" }, { "commit": "085af6fbaf1413c1fc5e8c719a72d3b413b52721", "tree": "d8fdf6e4bef53a46a1e7e12bc5f3d960c4967935", "parents": [ "7f46f90e24ec88f96a5d0d708d2e4eb4456ce326" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Thu Aug 02 17:38:55 2012 -0700" }, "committer": { "name": "Sridhar Parasuram", "email": "sridhar@codeaurora.org", "time": "Sat Aug 11 16:53:06 2012 -0700" }, "message": "Revert \"msm: copper: Switch on bus scaling for copper\"\n\nThis reverts commit a1cc890f04279b8e13b20cd3b3bceeb0d28a4e9b.\n\nBus scaling is known to break on Rumi.\n\nChange-Id: I7d66469aa8a32d8cd9594e4fad8b4da6039479ad\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "0012058c4482404516320af43169016d3375b235", "tree": "4fec3e8b435d73a76e77cc80fbe69cd46ecb3d50", "parents": [ "8e1e6b65fe92a0fa7bdb787fc7d9c5c0eae3d654" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Jul 13 11:33:39 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Aug 11 16:40:46 2012 -0700" }, "message": "coresight: implement stm hardware event and port enable sysfs nodes\n\nHave STM hardware event and port enable sysfs nodes to allow users to\nselectively enable and disable either hardware events or stimulus\nports while STM as a whole is enabled.\n\nChange-Id: I32c23f62a3782487e67eb5e6a9da5a5bf7e11df8\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "8e1e6b65fe92a0fa7bdb787fc7d9c5c0eae3d654", "tree": "6c33e4563cfedb58255520fe5b0142c861638a17", "parents": [ "cf7d045799f928ac338dbc9fea42538567a513e9" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Jun 29 12:24:49 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Aug 11 16:40:46 2012 -0700" }, "message": "coresight: enable stm logging for ftrace events and printk\n\nDup ftrace event traffic (including writes to trace_marker file from\nuserspace) to STM. Also dup printk traffic to STM. This allows Linux\ntracing and log data to be correlated with other data transported over\nSTM.\n\nChange-Id: Ieb0b856447f7667eb0005a6a884211dc46f50217\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "cf7d045799f928ac338dbc9fea42538567a513e9", "tree": "7ac2b9906d485fff75e77dc18c065b8ffb1881bc", "parents": [ "2291149f68875789ca515247a371542686f9799a" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Mon Jul 02 13:57:20 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Aug 11 16:40:46 2012 -0700" }, "message": "coresight: implement coresight abort\n\nProvide CoreSight abort debug api to stop the active trace sink\nfrom any context. This is a best effort api that can be used to\nabruptly stop and disable the current trace sink from anywhere\nin the kernel to avoid tracing and hence polluting the trace data\nafter the point of interest has been executed.\n\nChange-Id: I34c528d9febec4265088a7267dbcf0e7a1f87fcf\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "2291149f68875789ca515247a371542686f9799a", "tree": "7f8d0df3983c81984dcfeee4ae5027a7538fa457", "parents": [ "f20bacb252da5de2aa5806cd384c2f60603ffc42" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Mon Jun 25 21:38:02 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Aug 11 16:40:45 2012 -0700" }, "message": "coresight: coresight tmc driver\n\nThis driver manages CoreSight TMC (Trace Memory Controller) which\ncan be pre-configured as an ETF (Embedded Trace FIFO) or ETR\n(Embedded Trace Router). ETF when configured in circular buffer mode\nacts as an ETB (Embedded Trace Buffer).\n\nChange-Id: I1ca40e1fbd3049dc7addb834c064ab3a6c4c22e0\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "f20bacb252da5de2aa5806cd384c2f60603ffc42", "tree": "a222e92a9ba1bffd9151b804a925a221360fea7d", "parents": [ "7f46f90e24ec88f96a5d0d708d2e4eb4456ce326" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Jul 21 14:46:36 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sat Aug 11 16:40:45 2012 -0700" }, "message": "coresight: add coresight devices to msm8974 device tree\n\nAdd CoreSight component devices (sinks, links and sources) to the\nmsm8974 device tree. CoreSight devices provide tracing support for\nthe SoC.\n\nChange-Id: I33c4d3adff45c263b36141f1158434d9c83f0662\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "7f46f90e24ec88f96a5d0d708d2e4eb4456ce326", "tree": "fd9e545db66cd6a66633d2be883052334d88ec59", "parents": [ "8946766d3a9e35ca2a9f9114b52434de1f7d4c37", "7308114da9caf1e9c57b0d93abcefbd43b296551" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:10 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:10 2012 -0700" }, "message": "Merge \"msm: clock-8974: Allow set_rate on oxili_gfx3d_clk to go through to RPM\" into msm-3.4" }, { "commit": "8946766d3a9e35ca2a9f9114b52434de1f7d4c37", "tree": "ec262370dfab010ff15f9fa3aac26d8d7b0de390", "parents": [ "c0ed40cb908be7cc239c85539b62f7c77623a3e7", "e2300dedc827ce86f4470883505bedbcd452c755" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:08 2012 -0700" }, "message": "Merge changes I357430de,I29ab8a80 into msm-3.4\n\n* changes:\n msm: clock-rpm: Have RPM handoff account for the RPM-SMD driver\n msm: clock-8974: Enable the audio_core_ixfabric_clk in post_init\n" }, { "commit": "c0ed40cb908be7cc239c85539b62f7c77623a3e7", "tree": "72bb60c5c9a0649fe5ee11a98b31a4ff0a6bb9ab", "parents": [ "d7784bc0014e804f77699cd20fc26a8048bb79ef", "fc3c55c65927f977185969f9b01b4b6e391f78ac" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:08 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:08 2012 -0700" }, "message": "Merge changes I58671ac9,Iad40c91d into msm-3.4\n\n* changes:\n msm: clock-8974: Set GCC_BOOT_CLOCK_* registers to not force-on clocks\n msm: clock-8974: Correct LPASS measure mux settings\n" }, { "commit": "d7784bc0014e804f77699cd20fc26a8048bb79ef", "tree": "252c4c79ad6d33cae54024e8c495e4c65e10131a", "parents": [ "edd033551db6050e5146f384537a7f9242f541a3", "27da8de82fb76b00fc1be779b8027900b633612c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:07 2012 -0700" }, "message": "Merge \"msm: clock-8974: Correct an N value in a freq table for PCM clocks\" into msm-3.4" }, { "commit": "edd033551db6050e5146f384537a7f9242f541a3", "tree": "c5ebb9fcf9a39e08d4288379fe5d05e31aebb69e", "parents": [ "393cced79a0956948d16490c6fcce80b590f7d2c", "1988726c4c9e034f25a9c4d7c6d6e08e8305bae0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:05 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:05 2012 -0700" }, "message": "Merge \"msm: pil-mba: Print MBA error codes upon failures\" into msm-3.4" }, { "commit": "393cced79a0956948d16490c6fcce80b590f7d2c", "tree": "7ca066b9f475354d762f697dd1d4d7281d85c22c", "parents": [ "6132c03324ad99621d2466c0efa873f699e03d89", "652b34407506f8c95677fa68bc70df52954a96a7" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:03 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:03 2012 -0700" }, "message": "Merge \"msm: board-8930: Add control for PM8038 regulators LDO 13 and LDO 25\" into msm-3.4" }, { "commit": "6132c03324ad99621d2466c0efa873f699e03d89", "tree": "f7a7f8a6d3bcda2dd0b607299f72144e0dbe2e19", "parents": [ "703e84a785669dae5cc3ee8ae2b5b065fb629ca0", "18a5442be76b0b332082071235720415c0368572" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:03 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:03 2012 -0700" }, "message": "Merge \"msm: rpm-regulator: Add support for PM8038 LDO 13 and LDO 25\" into msm-3.4" }, { "commit": "703e84a785669dae5cc3ee8ae2b5b065fb629ca0", "tree": "0ee7f5446b8ce93742e1e4010565ab5461526fd0", "parents": [ "a77677b22849f608a60bfb7589d5bddfd5843bd4", "e8bf5d53d8c07645f8955516136d9f3b074ff7b8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:58:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 15:58:01 2012 -0700" }, "message": "Merge \"msm: 8974: Add Taiko codec to device tree\" into msm-3.4" }, { "commit": "e6440cf34f5ff205dc204cab5a2438a2053b5cda", "tree": "d792fbc4b1de25fb0d4b508a804986d21f9d84a9", "parents": [ "a77677b22849f608a60bfb7589d5bddfd5843bd4" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Aug 08 17:08:18 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 15:39:48 2012 -0600" }, "message": "arm/dt: pm8941: Add additional VADC channel nodes\n\nAdd additional main-mux voltage channels to read ADC\nfrom VADC USRP peripheral. The new channels have different\npre-div scaling compared to previous channel voltage node.\nThe new channel nodes include support to read vbatt, vcharger\nthat can be used by the battery driver. In addition, the\n625mV and 1.125V channel nodes are added to verify the\nreference channels used for absolute calibration.\n\nChange-Id: I53265a00b95ba4f5fb726731532070b8b758d86a\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "a77677b22849f608a60bfb7589d5bddfd5843bd4", "tree": "02f94a6a3260625d6aa24fb36edc19c42d2a5598", "parents": [ "e46aca6f38aeb8e7a7c640f0e8a0a629fda7f9c7", "79626248a312760f700d94b1974bcd391f68b20f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 14:29:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 14:29:45 2012 -0700" }, "message": "Merge \"msm: pil-venus: Fix iommu programming order in reset and shutdown\" into msm-3.4" }, { "commit": "e46aca6f38aeb8e7a7c640f0e8a0a629fda7f9c7", "tree": "c9d9e43fcb0b7ef5c163dcad7f246619b8762783", "parents": [ "14ee37df2a31a2fb56b02a45a30e550936d02a21", "5f6d1af0462b9072a2be6868ca73cfb4cb3524c1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 14:29:43 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 14:29:43 2012 -0700" }, "message": "Merge \"coresight: device tree support for coresight drivers\" into msm-3.4" }, { "commit": "ab7aafae3aac08a724d94873bcd103952e464ac4", "tree": "e721aa616fe6b128ec4e9556352cad51bc911573", "parents": [ "14ee37df2a31a2fb56b02a45a30e550936d02a21" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Sat Aug 11 12:34:46 2012 -0700" }, "committer": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Sat Aug 11 13:15:34 2012 -0700" }, "message": "drivers: qpnp-pin: Update subtype values to match hardware\n\nThe documentation followed to enumerate the subtype values was\nfound to differ from the actual implementation in hardware.\nUpdate to the values actually found in the hardware.\n\nChange-Id: I3a6d3027593bfb043b87d9c072c882981c649a6e\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "7308114da9caf1e9c57b0d93abcefbd43b296551", "tree": "ecbca9e80f2fcd617cf145a0bb4518d5b524f93b", "parents": [ "e2300dedc827ce86f4470883505bedbcd452c755" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Aug 03 15:57:47 2012 -0700" }, "committer": { "name": "Sridhar Parasuram", "email": "sridhar@codeaurora.org", "time": "Sat Aug 11 13:14:13 2012 -0700" }, "message": "msm: clock-8974: Allow set_rate on oxili_gfx3d_clk to go through to RPM\n\nThe graphics driver wishes to set the rate on the gfx3d_clk_src\nvia the oxili_gfx3d_clk. Add a voter clock for the ocmemgx_clk\nand set this new clock as the parent of oxili_gfx3d_clk.\n\nChange-Id: I8e469b93d88f0c71b51e95807db90a97240a9e06\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "e2300dedc827ce86f4470883505bedbcd452c755", "tree": "d5db8f5302b86565d0dc1b36c20100f47e9e442d", "parents": [ "6c0f1a7cd70ef760a10cb1a00e6c51ec3240cf3f" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Aug 10 04:58:50 2012 -0700" }, "committer": { "name": "Sridhar Parasuram", "email": "sridhar@codeaurora.org", "time": "Sat Aug 11 13:13:58 2012 -0700" }, "message": "msm: clock-rpm: Have RPM handoff account for the RPM-SMD driver\n\nThe RPM-SMD driver and the correponding communication protocol\nwith the RPM does not currently support querying of clock rates.\nAllow handoff to always succeed for RPM-SMD clocks. Previously,\nthe older RPM driver API stub would always return failure\ncausing RPM handoff to fail.\n\nChange-Id: I357430dec06a2305cdad2af4c213a3b98965e1e1\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "6c0f1a7cd70ef760a10cb1a00e6c51ec3240cf3f", "tree": "1b805d70e6ecc3ca7d90a8064ffd61a35aa11ecc", "parents": [ "fc3c55c65927f977185969f9b01b4b6e391f78ac" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Aug 10 01:59:28 2012 -0700" }, "committer": { "name": "Sridhar Parasuram", "email": "sridhar@codeaurora.org", "time": "Sat Aug 11 13:13:52 2012 -0700" }, "message": "msm: clock-8974: Enable the audio_core_ixfabric_clk in post_init\n\nTo be able to access certain audio core registers, the\naudio_core_ixfabric_clk needs to be on. Turn it on in\npost_init.\n\nChange-Id: I29ab8a80bb01696f362d97f98f53538c85f29a18\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "fc3c55c65927f977185969f9b01b4b6e391f78ac", "tree": "bd188e5ecc273c061ab1e4ba36c6ade30f921ffd", "parents": [ "93537014715d0bf57646f6000a778f57c4d9bf3c" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Wed Aug 08 16:25:22 2012 -0700" }, "committer": { "name": "Sridhar Parasuram", "email": "sridhar@codeaurora.org", "time": "Sat Aug 11 13:13:44 2012 -0700" }, "message": "msm: clock-8974: Set GCC_BOOT_CLOCK_* registers to not force-on clocks\n\nThe GCC_BOOT_CLOCK_* registers allow the boot code to\nforcefully turn on certain USB and Krait clocks. Clear\na bit in these registers to be able to turn those clocks\noff.\n\nChange-Id: I58671ac9bd0af72fd13f8ee0171979bb2a954348\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "93537014715d0bf57646f6000a778f57c4d9bf3c", "tree": "62f6f04334cd1d8cd9a49e27dbf93ffa0eaf319f", "parents": [ "27da8de82fb76b00fc1be779b8027900b633612c" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Wed Aug 08 14:44:33 2012 -0700" }, "committer": { "name": "Sridhar Parasuram", "email": "sridhar@codeaurora.org", "time": "Sat Aug 11 13:13:32 2012 -0700" }, "message": "msm: clock-8974: Correct LPASS measure mux settings\n\nThe LPASS debug mux index in the GCC top level mux\nand the bit to activate the debug mux output have\nbeen updated in documentation. Update the code to\nreflect this.\n\nChange-Id: Iad40c91ddba756a0fad455b93bf0f725ff27eae6\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "27da8de82fb76b00fc1be779b8027900b633612c", "tree": "03bff535453b21ccd297a8a242976c1375be9cd8", "parents": [ "14ee37df2a31a2fb56b02a45a30e550936d02a21" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Thu Aug 09 19:28:51 2012 -0700" }, "committer": { "name": "Sridhar Parasuram", "email": "sridhar@codeaurora.org", "time": "Sat Aug 11 13:13:26 2012 -0700" }, "message": "msm: clock-8974: Correct an N value in a freq table for PCM clocks\n\nThe 1536000 rate has an incorrect n value. Correct this.\n\nChange-Id: I018aa4677c05db0c25d994c150689a61296e9eeb\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "5bbcb0c01df009ad7a857eed7539ed18918aae28", "tree": "bd2fbc3472f2365ab7e7a4b8607e26cada1a7c8e", "parents": [ "c1c67a9e220374ab40b3185a0b8670cc8d753967" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Aug 07 17:25:52 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Sat Aug 11 13:08:47 2012 -0700" }, "message": "ASoC: wcd9310: fix TRRS override\n\nThe debugfs TRRS entry is for overriding headset button polling.\nFix regression not to start button polling when this flag is set.\n\nCRs-fixed: 386038\nChange-Id: I469c366bc111f37ecbb46708d2800200dd3d7584\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "c1c67a9e220374ab40b3185a0b8670cc8d753967", "tree": "4682675d75fc63e99fc2db0ec72082f23d8fd9c7", "parents": [ "14ee37df2a31a2fb56b02a45a30e550936d02a21" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Aug 07 16:05:36 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Sat Aug 11 13:08:35 2012 -0700" }, "message": "ASoC: wcd9310: make CFILT adjust time as a module parameter\n\nSome of accessories on the headset jack takes longer to settle down\nvoltage. Make adjust time to be configurable so those accessories can\nbe detected correctly.\n\nChange-Id: I3c2f68c8a4bb1a8f94669bd910728f014ee39874\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "14ee37df2a31a2fb56b02a45a30e550936d02a21", "tree": "62293224f358689b92de8dd0123c743fd79d50c5", "parents": [ "57b60f85527b539b6de7ab46a70dea671ac39824" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Wed Aug 08 15:18:09 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 07:36:05 2012 -0600" }, "message": "msm: clock-8974: Temporarily enable the LPASS Audio Core GDSC\n\nThe LPASS Audio Core GDSC needs to be on to unhalt various\naudio core CBCs in the LPASS CC. Temporarily enable it.\n\nChange-Id: Ie593e2b53a3eea89540d0feb308d23a8e5d2123f\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "e8bf5d53d8c07645f8955516136d9f3b074ff7b8", "tree": "62a597dc81339136ae4949b0ade37b5572bfffea", "parents": [ "82465b56b46ccf9c1e7864152305ab8b8c93ea05" ], "author": { "name": "Kiran Kandi", "email": "kkandi@codeaurora.org", "time": "Mon Aug 06 16:03:16 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 05:21:07 2012 -0600" }, "message": "msm: 8974: Add Taiko codec to device tree\n\nAdd Taiko codec to device tree so that platform specific data\ncan be read from device tree.\n\nChange-Id: I8b470bb7f40925baec95fff5fd08be5eb04b3a84\nSigned-off-by: Kiran Kandi \u003ckkandi@codeaurora.org\u003e\n" }, { "commit": "57b60f85527b539b6de7ab46a70dea671ac39824", "tree": "6dd78e42bb96b2391d8cff246fdc5c24d32335d3", "parents": [ "ef8b6e8d4f1999fbfbbf9723acf4de549378068d", "3c5ae1f883a8b6a7812d936c5f7e5bb4d0d3142b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 04:14:59 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 04:14:59 2012 -0700" }, "message": "Merge \"msm_fb: display: Update mdp clock counter for unsuccessful probes\" into msm-3.4" }, { "commit": "ef8b6e8d4f1999fbfbbf9723acf4de549378068d", "tree": "a7e4d65946e57496fd1848a8b89f7dcb90f2e7c2", "parents": [ "c44c6239c0d5285ea2b7a43db53855258d6d8d95", "f15aa8bcd2f3b4333e8f010c8af6be3a16cfb882" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 04:14:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 04:14:58 2012 -0700" }, "message": "Merge \"msm_fb: Increase the pixel clock range for DSI panels\" into msm-3.4" }, { "commit": "c44c6239c0d5285ea2b7a43db53855258d6d8d95", "tree": "2fc19bc0501a7af65e2b0ec628369b42e3b0ff0f", "parents": [ "82465b56b46ccf9c1e7864152305ab8b8c93ea05", "2a811f2a333ca0507eb98c35831af463f43fb011" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Aug 11 04:14:55 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Aug 11 04:14:55 2012 -0700" }, "message": "Merge \"msm_fb: Display: Fix Dithering issue for rgb565 format\" into msm-3.4" }, { "commit": "2a811f2a333ca0507eb98c35831af463f43fb011", "tree": "9d2c760f7f23b022561ead88b0d6614d1cd895b9", "parents": [ "41f49afeb872b851e8b2f4e078d47903e65a47bf" ], "author": { "name": "Chandan Uddaraju", "email": "chandanu@codeaurora.org", "time": "Tue Jul 17 16:54:28 2012 -0700" }, "committer": { "name": "Chandan Uddaraju", "email": "chandanu@codeaurora.org", "time": "Sat Aug 11 00:13:04 2012 -0700" }, "message": "msm_fb: Display: Fix Dithering issue for rgb565 format\n\nUsing RGB888 as source format and rgb565 as destination pixel format,\nwill cause image corruption on the display. Fix this issue by\nsetting the destination format as RGB888 in MDP and DSI controller\npixel format as RGB565 for DSI specific panels.\n\nCRs-Fixed: 377484\nChange-Id: If58976ee9cd4825efb39437170e54796fa2213e0\nSigned-off-by: Chandan Uddaraju \u003cchandanu@codeaurora.org\u003e\n" }, { "commit": "79626248a312760f700d94b1974bcd391f68b20f", "tree": "ecf4fd15f3dc9397ecf989895050a9ec3dddd399", "parents": [ "41f49afeb872b851e8b2f4e078d47903e65a47bf" ], "author": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Fri Aug 10 01:04:30 2012 -0700" }, "committer": { "name": "Tianyi Gou", "email": "tgou@codeaurora.org", "time": "Fri Aug 10 23:16:04 2012 -0700" }, "message": "msm: pil-venus: Fix iommu programming order in reset and shutdown\n\nIn reset function, venus internal clocks need to be on to access some of\nthe iommu registers. Fix the order to turn on the internal clocks and then\nprogram iommu.\n\nIn the shutdown function, iommu unmap and detach should be done before\nhalting AXI and AXI OCMEM VBIF access. Otherwise, the iommu TLB flush can\u0027t\ngo through. In addition, to avoid iommu page faults due to ARM9 accessing\nunmapped memory, reset to ARM9 must be asserted before unmapping and\ndetaching iommu.\n\nChange-Id: I6df152fd63b5d0583b9660370310e7a9b80ab6a8\nSigned-off-by: Tianyi Gou \u003ctgou@codeaurora.org\u003e\n" }, { "commit": "3c5ae1f883a8b6a7812d936c5f7e5bb4d0d3142b", "tree": "9eb52564ce6e7759734385086f523e45e8d54949", "parents": [ "41f49afeb872b851e8b2f4e078d47903e65a47bf" ], "author": { "name": "Mayank Chopra", "email": "makchopra@codeaurora.org", "time": "Mon Aug 06 19:43:42 2012 +0530" }, "committer": { "name": "Pradeep Jilagam", "email": "pjilagam@codeaurora.org", "time": "Sat Aug 11 11:31:00 2012 +0530" }, "message": "msm_fb: display: Update mdp clock counter for unsuccessful probes\n\nIf a panel probe does not succeed, call mdp_clk_ctrl to maintain\nmdp_clk_cnt counter else mismatch in counter results in mdp clock\nto never go off in cases like suspend-resume.\n\nCRs-Fixed: 385560\nChange-Id: I4ca54b051af98e823dc7f3ff7b9bcb960532c7e8\nSigned-off-by: Mayank Chopra \u003cmakchopra@codeaurora.org\u003e\n" }, { "commit": "1988726c4c9e034f25a9c4d7c6d6e08e8305bae0", "tree": "b85591a36a9e47d54291f0afd195352d5428baa7", "parents": [ "41f49afeb872b851e8b2f4e078d47903e65a47bf" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Aug 03 16:37:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 22:36:44 2012 -0700" }, "message": "msm: pil-mba: Print MBA error codes upon failures\n\nIf the MBA encounters an error, it puts a negative error code\nnumber in its status register. Rather than just detecting this\nand failing, print the error number to assist with debugging.\n\nChange-Id: I864b7eb19eb31dfd901a3e58dbcc0c8aba410c2e\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "5f6d1af0462b9072a2be6868ca73cfb4cb3524c1", "tree": "17319ced071c31baf3df5e1b123384e95dacddef", "parents": [ "41f49afeb872b851e8b2f4e078d47903e65a47bf" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Wed Jun 13 15:48:13 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Aug 10 20:06:25 2012 -0700" }, "message": "coresight: device tree support for coresight drivers\n\nSupport for reading hardware data for CoreSight devices from device\ntree.\n\nChange-Id: I4d149991c89b458384465d163386084f500a4028\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "82465b56b46ccf9c1e7864152305ab8b8c93ea05", "tree": "95d82ed497f3aa83e6d240bd42462b04614d6f1f", "parents": [ "2465c68e08f4a1d49df1db6cd89aa0efa9800b6e" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 15:36:13 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:05 2012 -0700" }, "message": "arm/dt: 8974: Support additional CDP platform IDs\n\nAppend additional hardware IDs to the CDP device tree.\n\nChange-Id: I295b740464ff084050dbbbce2ec8e62fda7bc772\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "2465c68e08f4a1d49df1db6cd89aa0efa9800b6e", "tree": "39425ed360c6554d87395e9be74688dba49d974b", "parents": [ "424b6980679c7f0f5fe71f48a711a4c21b464146" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Wed Aug 08 09:06:11 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:05 2012 -0700" }, "message": "msm: 8974: Switch regulators from rpm to local control\n\nAdd devices for the PMIC that match against the qpnp-regulator\ndriver for all supported regulator devices from the apps side.\n\nRemove most devices from the rpm_bus with the exception of the\ndevices that acpuclock is currently using. These need to stay\nsince acpuclock is calling rpm_regulator_get() that is only\navailable on the rpm-regulator driver.\n\nFor regulators that are duplicates between rpm and local, rename\nthe local names to end if a suffix of \"_local\" to make them\nunique. With the absense of a RPM, these RPM devices will amount\nto NOPs at runtime.\n\nThis switch to local control is temporary and will be reverted\nonce the RPM regulator support has been validated on 8974 CDP.\n\nChange-Id: Ie50db44595e487dcad659e67d623d32f4883d987\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "424b6980679c7f0f5fe71f48a711a4c21b464146", "tree": "c5a6cf1f4349b7035a4e1f21915f8f24f6543e0f", "parents": [ "7960a76326036b096f8580c8b1d03b17fe8783e4" ], "author": { "name": "Manu Gautam", "email": "mgautam@codeaurora.org", "time": "Thu Aug 09 09:45:29 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:04 2012 -0700" }, "message": "usb: msm_otg: Disable LPM on targets using device tree\n\nLow power mode is not supported as of now on targets which are\nusing device tree. Revert this later when support is in place.\n\nChange-Id: I05d6089d037312a0e719f4263093bde730c3a8ad\nSigned-off-by: Manu Gautam \u003cmgautam@codeaurora.org\u003e\n" }, { "commit": "7960a76326036b096f8580c8b1d03b17fe8783e4", "tree": "992de4a6c79d0be6fdfe4fb81c86bfebe8bfe22f", "parents": [ "c15dac0504d465513bb3b8d82166766429e7b301" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Aug 08 22:16:26 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:04 2012 -0700" }, "message": "defconfig: 8974: Enable DCC console\n\nThis is required to support console on\nJTAG debuggers.\n\nChange-Id: If9d1d26f1800ab40c57fcb79e249eea6936ab6fe\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "c15dac0504d465513bb3b8d82166766429e7b301", "tree": "1e66c94996b2d42f1788869cbbd3ee411f64844d", "parents": [ "5269b605853c8f7581bf1c552aa94ddcbd8eba34" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Thu Aug 09 13:31:08 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:04 2012 -0700" }, "message": "msm: clock-8974: Make mmss_s0_axi_clk depend on mmssnoc_axi_clk\n\nThe mmss_s0_axi clock needs to be turned on to allow MMSS NOC\nslaves to be able to access memory across the MMSS NOC and\nSystem NOC interconnect. However, this clock needs the\nmmssnoc_axi_clk to be on for the NOC handshake to work.\n\nTherefore, have the bus driver turn on the mmss_s0_axi_clk when\nthere are bandwidth requests for the MMSS NOC AXI clock and have\nmmss_s0_axi_clk depend on the mmssnoc_axi_clk.\n\nChange-Id: I81d0dc27ea7a7983ddbebbfff67c3426b3c6da94\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "5269b605853c8f7581bf1c552aa94ddcbd8eba34", "tree": "82a48b838a4931ada2da338758e213e8fda1e566", "parents": [ "f97dede7c35792c4b95e9b1e66d40c74e5b0859a" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Aug 08 17:57:09 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:03 2012 -0700" }, "message": "msm: 8974: Add serial console support\n\nAdd the device tree entries and clock table entries to\nsupport the serial console on the MSM8974 CDP target.\n\nChange-Id: I55bb2cbf3f02b6f78738baec55840a041c823d99\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "f97dede7c35792c4b95e9b1e66d40c74e5b0859a", "tree": "c5ae0956cd2a7759bc174862ba7cf88dc27ac358", "parents": [ "e18bf883706473118aaf0680c71abb7226ab606a" ], "author": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Wed Aug 08 17:40:44 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:03 2012 -0700" }, "message": "msm: 8974: Remove clock auxdata for serial devices\n\nClean up the clock table entries for msm_serial_hsl by\nremoving the auxdata and using the device names directly.\n\nChange-Id: I2390a4be9e15db449e07939e88ba738908ed724d\nSigned-off-by: Stepan Moskovchenko \u003cstepanm@codeaurora.org\u003e\n" }, { "commit": "e18bf883706473118aaf0680c71abb7226ab606a", "tree": "24a149db7ede264d3effdfecc7c97332cf6eccde", "parents": [ "9328e4907972ff0b95dc9e2ccd4a47911940f4ae" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Aug 09 15:00:23 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:02 2012 -0700" }, "message": "arm/dt: msm8974: Force the proper types for some regulators\n\npm8841_s2, pm8841_s(4-8) all report the wrong type and subtype\nfor FTS2 CTRL peripherals. Also, pm8941_l5 and pm8941_l7 are\nnot reported as LDOs correctly. Specify them as the correct\ntype and subtype using the qcom,force-type binding.\n\nChange-Id: I282ef934e38da5ad3faba3ea34258630cf8b7366\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "9328e4907972ff0b95dc9e2ccd4a47911940f4ae", "tree": "d451a14720302a27a2c5aad83581f27dfa14c706", "parents": [ "16bc5cc386af0f9c6ff83f22381e8eb79b03ecd2" ], "author": { "name": "Michael Bohan", "email": "mbohan@codeaurora.org", "time": "Thu Aug 09 11:37:36 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:02 2012 -0700" }, "message": "regulator: qpnp: Add property to override type registers\n\nOn some regulator hardware, the values read on SPMI offset 0x4 (type)\nand 0x5 (subtype) are incorrect. Add a new optional property called\nqcom,force-type that allows a user to override the hardware values\nwith values supplied in the Device Tree.\n\nChange-Id: Id73fe69873f5dc9d0f2623771872aa2eaddd66f1\nSigned-off-by: Michael Bohan \u003cmbohan@codeaurora.org\u003e\n" }, { "commit": "16bc5cc386af0f9c6ff83f22381e8eb79b03ecd2", "tree": "08c96d563952a402cc0b1490497659fd890742a5", "parents": [ "41f49afeb872b851e8b2f4e078d47903e65a47bf" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Aug 09 21:33:23 2012 -0700" }, "committer": { "name": "Stepan Moskovchenko", "email": "stepanm@codeaurora.org", "time": "Fri Aug 10 19:16:01 2012 -0700" }, "message": "msm: pil-q6v5-mss: Clear modem subsystem IO clamps prior to resetting Q6\n\nInterfacing with some modem subsystem peripherals is not possible\nunless the UNCLAMP_ALL bit is set in MSS_CLAMP_IO register. Set\nthis bit accordingly.\n\nChange-Id: I5685383c506b0bcb89d6b6f808021512079cc607\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "41f49afeb872b851e8b2f4e078d47903e65a47bf", "tree": "199f18762fd4c4cabad7da4a5efd3c16e598d90b", "parents": [ "ae20a9797cf84886f89022bdfa6de179e718fb26", "4c889b7cef5f85a58d9f4422dc033d30615b594b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 16:44:11 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 16:44:11 2012 -0700" }, "message": "Merge \"msm: kgsl: Hold pm_qos vote for active rendering\" into msm-3.4" }, { "commit": "ae20a9797cf84886f89022bdfa6de179e718fb26", "tree": "ca82568068de53d1d0be4b8cf5a7c8209cabf1e4", "parents": [ "6f3449df335ac10f0728c6c52a193dd83d2f9ef9", "f799996e309cad545b3a7f84ef6f333a09c8b876" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 16:44:10 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 16:44:10 2012 -0700" }, "message": "Merge \"Bluetooth: Block SCO disconnect operation on BT_CLOSED state.\" into msm-3.4" }, { "commit": "6f3449df335ac10f0728c6c52a193dd83d2f9ef9", "tree": "0d10c065bbc248035335dfbb80183f607adef643", "parents": [ "f245aa91c9dfaac82bac4c2ce8edb152581c1ec5", "723b2b7b9bf4138f368f35049972622df9efac7e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 16:44:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 16:44:07 2012 -0700" }, "message": "Merge \"msm: pil-q6v5: Enable subsystem\u0027s bus_clk before calling clk_reset()\" into msm-3.4" }, { "commit": "f245aa91c9dfaac82bac4c2ce8edb152581c1ec5", "tree": "90d4926fe9479b323d207d0a51ee4c0f086d20f4", "parents": [ "85c17a6f01c69bac066b03ef0ad67fd41a05a300", "27e77d2bda65c96815cb5f785df9ffd7bd733e6a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 16:44:03 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 16:44:03 2012 -0700" }, "message": "Merge \"Bluetooth: hidp: use dest address from session info\" into msm-3.4" }, { "commit": "85c17a6f01c69bac066b03ef0ad67fd41a05a300", "tree": "d92dc1dc4b8a786b792d2ea8a4e7caaecb336d05", "parents": [ "c5c61a9b51f5c526d4603996f981227908b781f7", "56865f0d059ff173e911d1e4231459fa7bc74627" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:15:02 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:15:02 2012 -0700" }, "message": "Merge \"msm: pil-q6v5: Enable q6ss_ahbm_clk for LPASS Q6\" into msm-3.4" }, { "commit": "c5c61a9b51f5c526d4603996f981227908b781f7", "tree": "8d3d3bf92e43106691e93e8e69c2598b5e69b5bc", "parents": [ "e46d398de8a0c52d283c26929f8a6e450e23b874", "b5b311e95b848df8a6634ede7965bcdf27bfe90e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:15:00 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:15:00 2012 -0700" }, "message": "Merge \"msm: clock-8974: Add the q6ss_ahbm_clk required by LPASS PIL\" into msm-3.4" }, { "commit": "e46d398de8a0c52d283c26929f8a6e450e23b874", "tree": "f4ccbe60584809fd685bc972aaf389011e5fe66a", "parents": [ "930a99d11cd74455fd8f06f9256bf0ac930c91ca", "3a2945ef2385ae934ab4df98f26651d132b7b4fc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:14:53 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:14:53 2012 -0700" }, "message": "Merge \"msm: vidc: Correct calculation of yuv buffer size\" into msm-3.4" }, { "commit": "930a99d11cd74455fd8f06f9256bf0ac930c91ca", "tree": "0c6325b11d1c122fa698e3b06aad1eb7024ac5be", "parents": [ "ffeb87399ab0a7b3eb1219aec214aa57f1a217e1", "a28d1bb434e8505630fc5d03383a0ed6d4565885" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:14:50 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:14:50 2012 -0700" }, "message": "Merge \"msm_fb: display: Add BLT support to dsi command mode panel\" into msm-3.4" }, { "commit": "ffeb87399ab0a7b3eb1219aec214aa57f1a217e1", "tree": "7e3372731eda9c2330a53a8a36966fa7f579ce5f", "parents": [ "962ebc8ecad1eb59dfce3fa782edf47049a0390b", "336810bed12a3cd650e578189c6b54f34883e74d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:14:48 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:14:48 2012 -0700" }, "message": "Merge \"defconfig: msm8974: Disable appended DT option\" into msm-3.4" }, { "commit": "962ebc8ecad1eb59dfce3fa782edf47049a0390b", "tree": "af97718d3cab1f9eb38a9b19caba5aacc8d7e894", "parents": [ "28148a5a8327a98d2726ede4e223a90dc23ab679", "725f849ff6e273e8bf5b818fdf53cee5290717af" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:14:46 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:14:46 2012 -0700" }, "message": "Merge \"msm: wcd9xxx: add device tree support for codec slimbus component\" into msm-3.4" }, { "commit": "28148a5a8327a98d2726ede4e223a90dc23ab679", "tree": "6eb218d61f133ece58d28f7a8474007de9b46b98", "parents": [ "d187bcdeda46fe957b93d04ef1ae2416b1869981", "16145bcbd6af8db0eebc0eedec1f01ee1b0b3635" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:14:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:14:42 2012 -0700" }, "message": "Merge \"vidc: 1080p: Reset meta data offset to zero\" into msm-3.4" }, { "commit": "d187bcdeda46fe957b93d04ef1ae2416b1869981", "tree": "fd442100a512966be07154522bdb601e2248584f", "parents": [ "0bdc894f7ddd3b106e121d385319486ec7d787c4", "c2a557ca7c83963156770f6e4212619969c29714" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 15:14:40 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 15:14:40 2012 -0700" }, "message": "Merge \"msm: vidc: Fix scratch buffer allocation.\" into msm-3.4" }, { "commit": "0bdc894f7ddd3b106e121d385319486ec7d787c4", "tree": "04d68484d0095bdc613bfcef625ede27d7d5c190", "parents": [ "40a845ab4be6564fe151d443074a9d21e3fcbae9", "4a1b2527a54820b2ece43ce55b41875354df70e2" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 13:48:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 13:48:18 2012 -0700" }, "message": "Merge changes I41aba112,Idf82149d into msm-3.4\n\n* changes:\n coresight: use devm apis in driver probe\n coresight: coresight replicator driver\n" }, { "commit": "40a845ab4be6564fe151d443074a9d21e3fcbae9", "tree": "2799c48cf8bb5071bcbe686717ecab6a4f333460", "parents": [ "55f93e5357f716ac7128a8f27ed3d85dccbb920e", "80515b5f77db3689fa821efb61092012bf0ba8c8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 13:48:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 13:48:17 2012 -0700" }, "message": "Merge \"coresight: clock support for coresight drivers for 8974\" into msm-3.4" }, { "commit": "55f93e5357f716ac7128a8f27ed3d85dccbb920e", "tree": "65f7fad31e61aab1a29314b6e3b8680fffdb17a1", "parents": [ "8fce0a5aeef0b9c0435bff2b5f1507fb40734253", "d3253c7547737e2fc6ebc182aac81c03de0f8f9a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 13:48:16 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 13:48:16 2012 -0700" }, "message": "Merge \"arm/dt: msm8974: Fix invalid address for PMIC regulator 8941_s3\" into msm-3.4" }, { "commit": "8fce0a5aeef0b9c0435bff2b5f1507fb40734253", "tree": "a160c1e71d0c0cd3fb0aef522dfd37bde742b44c", "parents": [ "7dc95baad1fa456e364285a6add5d7a380cfd11a", "b1cc493ae3745e18c025cddc51775c4ae8763751" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 13:48:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 13:48:15 2012 -0700" }, "message": "Merge \"gpio: msm: Make msmgpio a platform device\" into msm-3.4" }, { "commit": "723b2b7b9bf4138f368f35049972622df9efac7e", "tree": "a120f65bbba8864eb30042777ca501169e333089", "parents": [ "56865f0d059ff173e911d1e4231459fa7bc74627" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Aug 10 00:48:13 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Aug 10 12:30:45 2012 -0700" }, "message": "msm: pil-q6v5: Enable subsystem\u0027s bus_clk before calling clk_reset()\n\nFor MSS, the gcc_mss_cfg_ahb clock must be enabled for clk_reset(core_clk)\nto succeed, since the reset operations requires access to clock\ncontroller registers that are only accessible when that clock is on.\n\nChange the order of calls in pil_q6v5_enable_clks() and in\npil_q6v5_disable_clks() so that this constraint is obeyed.\n\nChange-Id: I43d19de36608601d8bd0b3d8f042023f9b2eb9ba\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "56865f0d059ff173e911d1e4231459fa7bc74627", "tree": "b88e1b37bc1373189acdd7b6e6908b9a4276c68b", "parents": [ "b5b311e95b848df8a6634ede7965bcdf27bfe90e" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Aug 09 15:03:36 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Aug 10 12:30:44 2012 -0700" }, "message": "msm: pil-q6v5: Enable q6ss_ahbm_clk for LPASS Q6\n\nThis clock must be enabled for the LPASS Q6 to reach its own clock\nregisters, so that it can turn on additional clocks on its own. Do\nthis.\n\nTo avoid adding another clock to struct q6v5_data, rename the mem_clk\nmember in it (used by MSS) to something more generic so it can also\nbe used by LPASS.\n\nChange-Id: I0b4ec626d249a48dd832a818f630f1f6aed1f98a\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "b5b311e95b848df8a6634ede7965bcdf27bfe90e", "tree": "04cae109df2d196366c78851bae7ca55ed0b2f71", "parents": [ "7dc95baad1fa456e364285a6add5d7a380cfd11a" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Thu Aug 09 14:58:48 2012 -0700" }, "committer": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Fri Aug 10 12:30:44 2012 -0700" }, "message": "msm: clock-8974: Add the q6ss_ahbm_clk required by LPASS PIL\n\nThe Q6 processor in the LPASS subsystem needs the q6ss_ahbm_clk\nregisters to be on to be able to access registers. Add support\nfor this clock.\n\nChange-Id: I0e2d5c677d1226648e8a06ae26cc86d9bc01a383\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "336810bed12a3cd650e578189c6b54f34883e74d", "tree": "126f85a24e4fd1004c9d5fd1e480d85319caf2f7", "parents": [ "f1e82321db2e074e517a1192031a80060dddffc9" ], "author": { "name": "David Ng", "email": "dave@codeaurora.org", "time": "Fri Jul 27 19:09:41 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 13:10:17 2012 -0600" }, "message": "defconfig: msm8974: Disable appended DT option\n\nDisable the kernel option to append device tree blob\nto end of kernel image. This is no longer necessary\nas the Android boot/recovery images will have a\nseparate section to store the device tree blob.\n\nChange-Id: I6e9ed038d704ffb59a09a58466fc56d68ebe072a\nSigned-off-by: David Ng \u003cdave@codeaurora.org\u003e\n" }, { "commit": "7dc95baad1fa456e364285a6add5d7a380cfd11a", "tree": "8ac7c64ccf8b9000eb5582503ec44b75a165e183", "parents": [ "958533c044cd46fb737c548776aa497c21cc8623", "45b86ac1b93930cc0fa6c8bbbcd434b586f46a46" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 12:03:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 12:03:56 2012 -0700" }, "message": "Merge \"regulator: qpnp-regulator: Update FTSMPS voltage ranges to match hardware\" into msm-3.4" }, { "commit": "958533c044cd46fb737c548776aa497c21cc8623", "tree": "45e51fdc1bff6e0a9a69e1edcb018e1ac8b19434", "parents": [ "ea9ca88b7d4d291b309764729aa1018edfd3683b", "2e02b861173406a1287a53ca7b836a4ad5fd4255" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 12:03:56 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 12:03:56 2012 -0700" }, "message": "Merge \"Bluetooth: fix shutdown on SCO sockets\" into msm-3.4" }, { "commit": "ea9ca88b7d4d291b309764729aa1018edfd3683b", "tree": "cd9fc2167f9b4523fe41f3f7fe417f5ba88e2ba8", "parents": [ "f8791efb40ea49cf4cb98e52804e2a5de08c01fe", "a7c3d7e6d905bab198003f16316971ae872eec9f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 12:03:54 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 12:03:54 2012 -0700" }, "message": "Merge \"Bluetooth: Disable sniff when the subrate values doesnt match.\" into msm-3.4" }, { "commit": "f8791efb40ea49cf4cb98e52804e2a5de08c01fe", "tree": "6a423dcf8de90596366680cec4aaade423c802d6", "parents": [ "eda2f95ad14e8e1fcbd3e96f706d61919aecb95d", "8b7d6a2159406ccf53387843b613e264e17f6939" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 12:03:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 12:03:45 2012 -0700" }, "message": "Merge \"arm/dt: msm8974: Remove PM8841 S5-S8 qpnp-regulator device nodes\" into msm-3.4" }, { "commit": "eda2f95ad14e8e1fcbd3e96f706d61919aecb95d", "tree": "900ee5379a65bf23fd691b143c7debcae820f979", "parents": [ "3de34075f77125412f91938ca706100553945f05", "797bdb7ef332468efd49d0c0a3c13500cceed0c8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 12:03:19 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 12:03:19 2012 -0700" }, "message": "Merge \"msm: rotator: Add pseudo-planar 422 H1V2 dst format for MDP4\" into msm-3.4" }, { "commit": "3de34075f77125412f91938ca706100553945f05", "tree": "f838808e72d030e1e8043e3b7eaa91925355c753", "parents": [ "f1e82321db2e074e517a1192031a80060dddffc9", "62be07fc58c20695dfe02c44760933b1c2bdae22" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 12:03:17 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 12:03:17 2012 -0700" }, "message": "Merge \"ARM: SMP: send IPI in backtrace only for SMP\" into msm-3.4" }, { "commit": "4a1b2527a54820b2ece43ce55b41875354df70e2", "tree": "f47219383e102ac1eb89e0e172279bb587c0d931", "parents": [ "450287e36bf0f7e78f94eea2d28c5b1aa137128b" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sun Jun 17 15:31:15 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Aug 10 11:06:19 2012 -0700" }, "message": "coresight: use devm apis in driver probe\n\nUsing devm_* apis helps in simplifying driver init and exit paths,\nhence switch to using them in the driver probe calls.\n\nChange-Id: I41aba1129f6638fcee859e57f957fa3f14c1c439\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "80515b5f77db3689fa821efb61092012bf0ba8c8", "tree": "7cc95596a9a436730f46f24b14b0e879e6f15e7c", "parents": [ "f1e82321db2e074e517a1192031a80060dddffc9" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Sun Jun 17 17:57:24 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Aug 10 11:06:19 2012 -0700" }, "message": "coresight: clock support for coresight drivers for 8974\n\nAdd clock support for 8974 so that CoreSight drivers can manage\nclock for the device they manage.\n\nChange-Id: I7b04fbe26e07a7ae5cf6a112c99f04dc092105f3\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "450287e36bf0f7e78f94eea2d28c5b1aa137128b", "tree": "2b1c05c5b8b1f4611c58f8856cf71857cf00d3aa", "parents": [ "80515b5f77db3689fa821efb61092012bf0ba8c8" ], "author": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Wed Jun 13 11:18:25 2012 -0700" }, "committer": { "name": "Pratik Patel", "email": "pratikp@codeaurora.org", "time": "Fri Aug 10 11:06:19 2012 -0700" }, "message": "coresight: coresight replicator driver\n\nThis driver manages the CoreSight Replicator that has been made\nprogrammable to allow software to turn of the replicator branch\nto sink that is not being used. This avoids trace traffic to the\nunused/non-current sink from causing backpressure that results in\noverflows at the source.\n\nChange-Id: Idf82149d5dc3702b6da59147e4d9d5e532032161\nSigned-off-by: Pratik Patel \u003cpratikp@codeaurora.org\u003e\n" }, { "commit": "b1cc493ae3745e18c025cddc51775c4ae8763751", "tree": "9a29148d118c822f398497f731f08baa5c5cdf60", "parents": [ "f1e82321db2e074e517a1192031a80060dddffc9" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Mon Jul 23 21:30:11 2012 -0700" }, "committer": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Fri Aug 10 10:54:51 2012 -0700" }, "message": "gpio: msm: Make msmgpio a platform device\n\nThe gpio driver was not a true platform driver and hence wasn\u0027t\nsupported by device tree. This patch fixes that for non-DT targets\nby making sure the device gets added early on during board init.\nFor DT-targets, adding the gpio-controller property for the device\nmakes sure the msmgpio device gets probed.\nThis change is done for all TLMM_v2 targets (msm8660 and future)\nTLMM_V1 targets remain unaffected.\n\nChange-Id: I8a55ab1e2af0366b3e6893b334ba2396d2a83190\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "4c889b7cef5f85a58d9f4422dc033d30615b594b", "tree": "b937daabe74c623dc99f6cfe744a572c24e4e32b", "parents": [ "f1e82321db2e074e517a1192031a80060dddffc9" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Aug 03 11:25:25 2012 -0600" }, "committer": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Aug 10 11:48:07 2012 -0600" }, "message": "msm: kgsl: Hold pm_qos vote for active rendering\n\nDifferentiate between the screen off case where kgsl shouldn\u0027t\nhold a pm_qos vote and the screen on case where power rails\nmay be turned off after a long idle. restore_slumber now\ncorresponds to the screen on/off while strtstp_sleepwake covers\nthe power rail collapse.\n\nCRs-Fixed: 386956\nChange-Id: Id4318f1aa87d6ad0653fe5db18c5d33bda1cc8bb\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "652b34407506f8c95677fa68bc70df52954a96a7", "tree": "d08669ca2efc950f96ae9e33514145141e182db2", "parents": [ "18a5442be76b0b332082071235720415c0368572" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Aug 09 14:47:51 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Aug 10 10:20:42 2012 -0700" }, "message": "msm: board-8930: Add control for PM8038 regulators LDO 13 and LDO 25\n\nAdd LDO 13 and LDO 25 configurations and contraints in\nboard-8930-regulator.c so that these regulators can be controlled\nby regulator framework consumers.\n\nChange-Id: Idd8bfd5bca1f8104a071b566d09fb9c756db8853\nCRs-Fixed: 385569\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "18a5442be76b0b332082071235720415c0368572", "tree": "7eae7b8d46222d1f67c885ae6a6b5cfda1232be9", "parents": [ "f1e82321db2e074e517a1192031a80060dddffc9" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Aug 09 14:41:06 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Aug 10 10:18:42 2012 -0700" }, "message": "msm: rpm-regulator: Add support for PM8038 LDO 13 and LDO 25\n\nAdd configuration data for PMIC PM8038 LDO 13 (VREG_XO) and\nLDO 25 (VREG_RF_CLK) so that these regulators may be controlled\nvia the RPM.\n\nChange-Id: Idcc81617dc40c37b4e7493cfb3febd4946815150\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "c2a557ca7c83963156770f6e4212619969c29714", "tree": "8342c0ad654b1ea2cf21dc89784c431be151bcf3", "parents": [ "90b2cca21b417887a8a221c323cbf012dd44ba99" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Fri Aug 03 11:39:47 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 11:04:23 2012 -0600" }, "message": "msm: vidc: Fix scratch buffer allocation.\n\nIn some cases, firmware is reqesting driver\nto allocate one scratch with size zero,\neg: if height and width is set to zero on\nfirmware. This change handles this scenario\nappropriately to avoid kernel panic.\n\nChange-Id: If670f91ef600678af8e246934f685defcb7fdfeb\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "f1e82321db2e074e517a1192031a80060dddffc9", "tree": "f6e5aceac1a07937035de928727b7f74435a6ce1", "parents": [ "a392e2a65e4b8c7e34607b2505fe5dba05eb24e6", "ae1da734c5d346736d5b247c2225595f0af0b044" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 09:56:35 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 09:56:36 2012 -0700" }, "message": "Merge \"hwmon: qpnp-adc: Fix register read/writes\" into msm-3.4" }, { "commit": "a392e2a65e4b8c7e34607b2505fe5dba05eb24e6", "tree": "32431448fa5ad7bf622b7c74cef0c877148dea3f", "parents": [ "8f6e08abbfe3e02341d96ad2dcadb2d32141b2ef", "2bf9c529997fa95295b95b100a75f600c5b020de" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 09:56:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 09:56:26 2012 -0700" }, "message": "Merge \"tty: n_smux: Add support for ldisc removal during SSR\" into msm-3.4" }, { "commit": "8f6e08abbfe3e02341d96ad2dcadb2d32141b2ef", "tree": "d65faee531e8f78352693c5ecc6cf7cca7c751f5", "parents": [ "4af5584714be4e4050381c3bdae3be11fef11571", "1e76f61bb001b93795a227f8f808104b6c10b048" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 09:56:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 09:56:21 2012 -0700" }, "message": "Merge \"msm: kgsl: Detect and avoid malformed ioctl codes\" into msm-3.4" }, { "commit": "4af5584714be4e4050381c3bdae3be11fef11571", "tree": "95f5433b25c94773c7f0800e53ed5dd43f99c996", "parents": [ "99f8d6b67031387432b642e2e3e343ae75052a47", "8e2b559d1a1694e10bb2aa47826db24a8baceda6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 09:56:16 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 09:56:16 2012 -0700" }, "message": "Merge \"msm_fb: hdmi: Give proper buffer size\" into msm-3.4" }, { "commit": "99f8d6b67031387432b642e2e3e343ae75052a47", "tree": "bb93f39bc224b148ec18d53f3d0e2da79145b924", "parents": [ "0e3f3bb87f07de390c2ef1600f746e2a8e14e8c3", "11c07e2e1bd805a554714a2039cd803886d5593c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 09:56:11 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 09:56:11 2012 -0700" }, "message": "Merge changes I35ef0e38,Id6c41b93 into msm-3.4\n\n* changes:\n msm: pil-q6v5: Update QDSP6SS RESET and PWR_CTL registers\n msm: pil-q6v5: Disable Q6 core_clk and core_rclk gating\n" }, { "commit": "0e3f3bb87f07de390c2ef1600f746e2a8e14e8c3", "tree": "c7e43ce1cdcc3108299b4002cd7e2c39497086d4", "parents": [ "90b2cca21b417887a8a221c323cbf012dd44ba99", "a2cba0df366dc571feb8f8a750405f2ad8284cf6" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 09:56:07 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 09:56:07 2012 -0700" }, "message": "Merge \"msm: mpq8064: Use ION to alloc driver buffers\" into msm-3.4" }, { "commit": "f799996e309cad545b3a7f84ef6f333a09c8b876", "tree": "e3c3f6434be96ba817652239a811122d62427ee5", "parents": [ "2e02b861173406a1287a53ca7b836a4ad5fd4255" ], "author": { "name": "Srinivas Krovvidi", "email": "skrovvid@codeaurora.org", "time": "Wed Aug 01 18:21:37 2012 +0530" }, "committer": { "name": "Srinivas Krovvidi", "email": "skrovvid@codeaurora.org", "time": "Fri Aug 10 21:18:18 2012 +0530" }, "message": "Bluetooth: Block SCO disconnect operation on BT_CLOSED state.\n\nHave maximum blocking time for shutdown operation as DISCONNECT_TIMEOUT.\nDuring this period when SCO connection closes, the userspace will be\nupdated on the close operation. Existing approach of immidiate return\non shutdown call can cause synchronization issues on SCO state between\nkernel and userspace. This happens when disconnect operation takes\nmore time at kernel space.\n\nChange-Id: Id9e6a61c2c3d4ba2cf6da574fc49bc6894a8f96a\nSigned-off-by: Srinivas Krovvidi \u003cskrovvid@codeaurora.org\u003e\n" }, { "commit": "a28d1bb434e8505630fc5d03383a0ed6d4565885", "tree": "ba35d8d551fddc626b8df93a1bd15778705ad920", "parents": [ "90b2cca21b417887a8a221c323cbf012dd44ba99" ], "author": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Sun Jul 29 08:56:58 2012 -0700" }, "committer": { "name": "Kuogee Hsieh", "email": "khsieh@codeaurora.org", "time": "Fri Aug 10 08:30:19 2012 -0700" }, "message": "msm_fb: display: Add BLT support to dsi command mode panel\n\nAt run time, mdp BLT (writeback) mode is enabled and disabled\nbase on performance level to avoid mdp underrun. Move BLT\nenabled/disabled logic to pan display so that enabled/disable\nis done per commit instead of per queue. Since all panels\nare shared same logic, dsi video mode and lcdc panel BLT logic\nhave been changed accordingly.\n\nChange-Id: I6e04bf0f7bf1c13634e19b18d8ac4368affbc4d8\nSigned-off-by: Kuogee Hsieh \u003ckhsieh@codeaurora.org\u003e\n" }, { "commit": "90b2cca21b417887a8a221c323cbf012dd44ba99", "tree": "6d6536efdf5a75a0b8a3ece257b8ad6865e6fd46", "parents": [ "60641b177715fd812fe59f8c987d6fe00a4bf407", "1c15029f8551ca8f5ffa57973c4eabc471177333" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 07:58:34 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 07:58:34 2012 -0700" }, "message": "Merge \" msm_fb: display: retrieve correct base layer pipe\" into msm-3.4" }, { "commit": "60641b177715fd812fe59f8c987d6fe00a4bf407", "tree": "dbbe78bce0168b22329e0416e0b1fd154c0fdfe0", "parents": [ "805f616d6c17a0ccc915439e153668837824d51b", "df5e3279961b1f43a38ba50f787d785a81ed1e36" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Aug 10 07:58:30 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Aug 10 07:58:30 2012 -0700" }, "message": "Merge \"msm_fb: display: free dtv iommu buffer\" into msm-3.4" } ], "next": "1c15029f8551ca8f5ffa57973c4eabc471177333" }