)]}' { "log": [ { "commit": "4486ea987efdaa546bdda569e3dfacdc14a9fb13", "tree": "2d9a0bb6580772d483f7480469e6ce06f8f87bb3", "parents": [ "bff2ec2b916cc85628f3025e08660c0350f03650" ], "author": { "name": "Bala Shanmugam", "email": "bkamatch@qca.qualcomm.com", "time": "Wed Mar 07 17:27:12 2012 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 12 14:19:34 2012 -0400" }, "message": "cfg80211: Add background scan period attribute.\n\nReceive background scan period as part of connect\ncommand and pass the same to the driver.\n\nSigned-off-by: Bala Shanmugam \u003cbkamatch@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "804483e90794256f9ed53e795ffbf1e94de237c8", "tree": "22a4d8ade674bb42aaf4d3e878dfd6a73b618dcc", "parents": [ "769009b89d8c29c410a99eee3cd63764b1fff869" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Mar 05 22:18:41 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 06 15:16:05 2012 -0500" }, "message": "cfg80211/mac80211: report signal strength for mgmt frames\n\nAdd the signal strength (in dBm only for now) to\nframes that are received via nl80211\u0027s various\nframe APIs.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nAcked-by: Kalle Valo \u003ckvalo@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1b658f118b11de3c4052ed8cbdd5803cd1fa5670", "tree": "162160c05d29fc99b18d1914ffe2d614f2c9af6a", "parents": [ "d665508b98d3cdbeb476e7d6848a513184a81ed0" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vthiagar@qca.qualcomm.com", "time": "Fri Mar 02 15:50:02 2012 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 05 15:38:34 2012 -0500" }, "message": "cfg80211: Add an attribute to set inactivity timeout in AP mode\n\nThis patch adds an attribute, NL80211_ATTR_INACTIVITY_TIMEOUT,\nto set the inactivity timeout which can be used to remove the\nstation in AP mode. This can be passed in NL80211_CMD_START_AP\nand used by the drivers which have AP MLME in firmware but\ndon\u0027t support get_station() properly. To disable inactivity\ntimer in userspace, wpa_s for example, there is a new flag,\nNL80211_FEATURE_INACTIVITY_TIMER, in nl80211_feature_flags\nthrough which drivers can register their capability to use\nthe inactivity timeout to free the stations.\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvthiagar@qca.qualcomm.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5533513784a88049e19dd2ab380a452b61e5171e", "tree": "8e48d0cf30f3e94475ee80479308e98908b3c0bc", "parents": [ "5809802180b2b638762465cbad3f51a9ac8ff0b3" ], "author": { "name": "Ashok Nagarajan", "email": "ashok@cozybit.com", "time": "Tue Feb 28 17:04:08 2012 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 05 15:23:15 2012 -0500" }, "message": "{nl,cfg,mac}80211: Implement RSSI threshold for mesh peering\n\nMesh peer links are established only if average rssi of the peer\ncandidate satisfies the threshold. This is not in 802.11s specification\nbut was requested by David Fulgham, an open80211s user. This is a way to avoid\nmarginal peer links with stations that are barely within range.\n\nThis patch adds a new mesh configuration parameter, mesh_rssi_threshold. This\nfeature is supported only for hardwares that report signal in dBm.\n\nSigned-off-by: Ashok Nagarajan \u003cashok@cozybit.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8860020e0be1f03d83dc9e9e93e18a4ddbe01038", "tree": "09fa9089770e8a42e913f6c11abbba04bec20fad", "parents": [ "4e3bc141d480661634d0fadad7dbb1ddde70b4d4" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Feb 13 15:17:18 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Feb 22 14:51:18 2012 -0500" }, "message": "cfg80211: restructure AP/GO mode API\n\nThe AP/GO mode API isn\u0027t very clearly defined, it\nhas \"set beacon\" and \"new beacon\" etc.\n\nModify the API to the following:\n * start AP -- all settings\n * change beacon -- new beacon data\n * stop AP -- stop AP mode operation\n\nThis also reflects in the nl80211 API, rename\nthe commands there correspondingly (but keep\nthe old names for compatibility.)\n\nOverall, this makes it much clearer what\u0027s going\non in the API.\n\nKalle developed the ath6kl changes, I created\nthe rest of the patch.\n\nSigned-off-by: Kalle Valo \u003ckvalo@qca.qualcomm.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24db78c05b1e3ccb5a78aedd17aa1008c91dab5a", "tree": "f41babc8ada871a26619be23f983121ad557da91", "parents": [ "d273bb20c00340748e3ca9730f87524ec5abbd64" ], "author": { "name": "Simon Wunderlich", "email": "simon.wunderlich@s2003.tu-chemnitz.de", "time": "Sat Jan 28 17:25:32 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jan 30 15:48:25 2012 -0500" }, "message": "nl80211: add support for mcs masks\n\nAllow to set mcs masks through nl80211. We also allow to set MCS\nrates but no legacy rates (and vice versa).\n\nSigned-off-by: Simon Wunderlich \u003csiwu@hrz.tu-chemnitz.de\u003e\nSigned-off-by: Mathias Kretschmer \u003cmathias.kretschmer@fokus.fraunhofer.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "94f9065648a2645b28187b44ec7778c30cf58758", "tree": "734ee883e3fbd99de04240da97716d773d64bb6d", "parents": [ "2da8f419e78a0ebccc91c095328278fe668a7932" ], "author": { "name": "Chun-Yeow Yeoh", "email": "yeohchunyeow@gmail.com", "time": "Sat Jan 21 01:02:16 2012 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 27 14:56:56 2012 -0500" }, "message": "{nl,cfg,mac}80211: Add support of setting non-forwarding entity in Mesh\n\nA mesh node that joins the mesh network is by default a forwarding entity. This patch allows\nthe mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the\nmesh node can prevent itself from forwarding the traffic which is not destined to him.\n\nSigned-off-by: Chun-Yeow Yeoh \u003cyeohchunyeow@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a85e1d55974646a442d95911e3f7d7a891ea9ac5", "tree": "aa4dbeb64336c8e3ee2003a7963ec8ef38675101", "parents": [ "84381b4ed58498e1e3d49a4a306fec9894b8e00c" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Fri Dec 09 11:01:49 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 19 14:34:13 2011 -0500" }, "message": "cfg80211: Return beacon loss count in station\n\nIf station info contains a beacon loss count, return\nit to userspace.\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bdd90d5e36a55271beb957b3d7ca3e29b2a90207", "tree": "79243e73e6c64217bc676507504b72a2d59fc096", "parents": [ "d83023daa219486e9aa139d423308a045bf0438b" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Dec 14 12:20:27 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 15 14:45:45 2011 -0500" }, "message": "cfg80211: validate nl80211 station handling better\n\nThe nl80211 station handling code is a bit messy\nand doesn\u0027t do a lot of validation. It seems like\nthis could be an issue for drivers that don\u0027t use\nmac80211 to validate everything.\n\nAs cfg80211 doesn\u0027t keep station state, move the\nvalidation of allowing supported_rates to change\nfor TDLS only in station mode to mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "54858ee5bf659f80a784303e41ee8898fd163f98", "tree": "46901bbd75f8dacfe9677e8d17085508d918d325", "parents": [ "2b50b8f58803f4c8521c6aa5401ed01cd36a1f77" ], "author": { "name": "Alexander Simon", "email": "an.alexsimon@googlemail.com", "time": "Wed Nov 30 16:56:32 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 06 16:05:24 2011 -0500" }, "message": "nl80211: Parse channel type attribute in an ibss join request\n\nPrepare cfg80211 for IBSS HT:\n * extend cfg80211 ibss struct with channel_type\n * Check if extension channel can be used\n * Export can_beacon_sec_chan for use in mac80211 (will be called\n from ibss.c later).\n\nSigned-off-by: Alexander Simon \u003can.alexsimon@googlemail.com\u003e\n[siwu@hrz.tu-chemnitz.de: Updates]\n* fix cfg80211_can_beacon_ext_chan comment\n* remove implicit channel_type enum assumptions\n* remove radar channel flags check\n* add HT IBSS feature flag\n* reword commit message\n\nSigned-off-by: Simon Wunderlich \u003csiwu@hrz.tu-chemnitz.de\u003e\nSigned-off-by: Mathias Kretschmer \u003cmathias.kretschmer@fokus.fraunhofer.de\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dca7e9430cb3e492437a5ce891b8b3e315c147ca", "tree": "a7503e86e20e649074bbaccd5272d61a51425e2e", "parents": [ "d3c1597b8d1ba0447ce858c7c385eabcf69f2c8f" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Thu Nov 24 17:15:24 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 28 14:44:06 2011 -0500" }, "message": "{nl,cfg,mac}80211: implement dot11MeshHWMPperrMinInterval\n\nAs per 802.11mb 13.9.11.3\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1d9d9213d526f2f4ef9a3aa198a29a0b1a670fa1", "tree": "34eadd9e3544cbb01c6768dee820d5430db10edc", "parents": [ "6fd67e937ece538e0ab766df96a9895e6fd622df" ], "author": { "name": "Simon Wunderlich", "email": "simon.wunderlich@s2003.tu-chemnitz.de", "time": "Fri Nov 18 14:20:43 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 28 14:36:21 2011 -0500" }, "message": "wireless: Add NoAck per tid support\n\nThis patch contains the configuration changes in nl80211/cfg80211.\n\nSigned-off-by: Simon Wunderlich \u003csiwu@hrz.tu-chemnitz.de\u003e\nSigned-off-by: Mathias Kretschmer \u003cmathias.kretschmer@fokus.fraunhofer.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7e7c8926b2f4e3453b8aeb39cd814d2af3fec24f", "tree": "e22df42bf84d6ea3cb67ae0e332d7d7d10cca4b4", "parents": [ "dd76986b0e398978ca32dd60c1b7dc50ab4e9ae1" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Fri Nov 18 11:31:59 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 21 16:22:06 2011 -0500" }, "message": "wireless: Support ht-capabilities over-rides.\n\nThis allows users to disable features such as HT, HT40,\nand to modify the MCS, AMPDU, and AMSDU settings for\ndrivers that support it.\n\nThe MCS, AMPDU, and AMSDU features that may be disabled are\nare reported in the phy-info netlink message as a mask.\n\nAttemping to disable features that are not supported will\ntake no affect, but will not return errors. This is to aid\nbackwards compatibility in user-space apps that may not be\nclever enough to deal with parsing the the capabilities mask.\n\nThis patch only enables the infrastructure. An additional\npatch will enable the feature in mac80211.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8b60b07805d557542160d852874fa6a1b969184e", "tree": "74b96b63c62cf7cef9684c19bda8f8d51ceabe0d", "parents": [ "4713e962c5d98901890c446843ae4e0a9d37b7b3" ], "author": { "name": "Luis R. Rodriguez", "email": "mcgrof@qca.qualcomm.com", "time": "Tue Oct 11 10:59:02 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 21 16:20:41 2011 -0500" }, "message": "cfg80211: process regulatory DFS region for countries\n\nThe wireless-regdb now has support for mapping a country to\none DFS region. CRDA sends this to us now so process it\nso we can provide that hint to drivers. This will later be\nused by code for processing DFS in a way that meets the\ncriteria for the DFS region the country belongs to.\n\nSigned-off-by: Luis R. Rodriguez \u003cmcgrof@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "00f740e1a3b7abb51980371ee8fa113df22ae0b8", "tree": "ef32c13175ba8bd2aed63d5fb31ad393829ce90d", "parents": [ "87bbbe22f84b91d0bcd3a7fc638e4f5e8224cc4e" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Thu Nov 10 11:28:56 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 11 12:32:51 2011 -0500" }, "message": "nl80211: Pass probe response data to drivers\n\nPass probe-response data from usermode via beacon parameters.\n\nSigned-off-by: Guy Eilam \u003cguy@wizery.com\u003e\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "87bbbe22f84b91d0bcd3a7fc638e4f5e8224cc4e", "tree": "ef61839cade89a6c47c96c3447d0d4c12f913c41", "parents": [ "d64d373ffed925f29c3e68a8d6f45677a622054e" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Thu Nov 10 11:28:55 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 11 12:32:51 2011 -0500" }, "message": "nl80211: Add probe response offload attribute\n\nNotify user-space about probe-response offloading support in the driver.\n\nA wiphy flag is used to indicate support and a bitmap of protocols\ndetermines which protocols are supported.\n\nSigned-off-by: Guy Eilam \u003cguy@wizery.com\u003e\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1f074bd8eb7a4a210a5119cd7220f89da6c7a2c3", "tree": "336706ad776cf96ce67ae0889f4fb93311c0d29a", "parents": [ "e41215626607f2e9b2227504a8965389a1ba1a25" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Sun Nov 06 14:13:33 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:14:08 2011 -0500" }, "message": "nl80211: advertise socket TX status capability\n\nThe new wifi socket TX capability should be\nsupported by wifi drivers, let them advertise\nwhether they do or not.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e247bd9068e3e86c3571147c128883596ace9d05", "tree": "5639065f2b0bfe4cb7389a75e274bc8a53efd75f", "parents": [ "e7f4a940bb5eecd07cf0039e7d9201badc332ae0" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:21 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:13:54 2011 -0500" }, "message": "cfg80211/mac80211: allow management TX to not wait for ACK\n\nFor probe responses it can be useful to not wait for ACK to\navoid retransmissions if the station that sent the probe is\nalready on the next channel, so allow userspace to request\nnot caring about the ACK with a new nl80211 flag.\n\nSince mac80211 needs to be updated for the new function\nprototype anyway implement it right away -- it\u0027s just a\nfew lines of code.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b92ab5d86dafc2b3733c5fdd5def40c8fe7ea7c9", "tree": "2676545e9b179102b00e02cc19b9643e8f718871", "parents": [ "ee971924543fe82f279d3e97f6f6d02320b381b7" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:19 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:13:52 2011 -0500" }, "message": "cfg80211: add event for unexpected 4addr frames\n\nThe frames are used by AP/STA WDS mode, and hostapd\nneeds to know when such a frame was received to set\nup the VLAN appropriately to allow using it.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5e760230e42cf759bd923457ca2753aacf2e656e", "tree": "c5fd969b75460a915f604fa10bf635999d09989f", "parents": [ "06500736c5d26bff93a4f358713689073e66d0f5" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:17 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:13:51 2011 -0500" }, "message": "cfg80211: allow registering to beacons\n\nAdd the ability to register to received beacon frames\nto allow implementing OLBC logic in userspace. The\nregistration is per wiphy since there\u0027s no point in\nreceiving the same frame multiple times.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7f6cf311a594c1e7ca8120367dd1d4c685aabff1", "tree": "60308101541ba278a4dabd8a5884b5a0de3722eb", "parents": [ "562a74803f4881772ba2375ec4e5aa0ad90f4caa" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:15 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:12:39 2011 -0500" }, "message": "nl80211: add API to probe a client\n\nWhen the AP SME in hostapd is used it wants to\nprobe the clients when they have been idle for\nsome time. Add explicit API to support this.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "562a74803f4881772ba2375ec4e5aa0ad90f4caa", "tree": "2f6e553b4bf17e410c4d4c16cd8388820e7f9b63", "parents": [ "21fc756087d7659d86c344c0b38229313afc6c7c" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Nov 07 12:39:33 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:12:38 2011 -0500" }, "message": "nl80211: advertise device AP SME\n\nAdd the ability to advertise that the device\ncontains the AP SME and what features it can\nsupport. There are currently no features in\nthe bitmap -- probe response offload will be\nadvertised by a few patches Arik is working\non now (who took over from Guy Eilam) and a\ndevice with AP SME will typically implement\nand require response offload.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "28946da763e8b8d8ffd01ab861b684a4afb4bc3b", "tree": "c4e1cd440702b81c2192a164356da4ba769a29a6", "parents": [ "665c93a93e35cafcd8c84073824f1ef1b19f0a7d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:12 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:05:49 2011 -0500" }, "message": "nl80211: allow subscribing to unexpected class3 frames\n\nTo implement AP mode without monitor interfaces we\nneed to be able to send a deauth to stations that\nsend frames without being associated. Enable this\nby adding a new nl80211 event for such frames that\nan application can subscribe to.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bb6e753e95a968fab0e366caace78fb2c08cc239", "tree": "23ae519a1a766cda1b6927fc0a230dfd0dbbe639", "parents": [ "59b66255bc7804970098533ce7c9bf6967f35f62" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Thu Oct 13 16:30:39 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 14 14:48:23 2011 -0400" }, "message": "nl80211: Add sta_flags to the station info\n\nReuse the already existing struct nl80211_sta_flag_update to specify\nboth, a flag mask and the flag set itself. This means\nnl80211_sta_flag_update is now used for setting station flags and also\nfor getting station flags.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "07ba55d7f1d0da174c9bc545c713b44cee760197", "tree": "6ef39589ced179b1f76d7148652f10fc333f3349", "parents": [ "dfe018bf99537e42c816d3f543620a7e09fcf3cd" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:53 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:08 2011 -0400" }, "message": "nl80211/mac80211: allow adding TDLS peers as stations\n\nWhen adding a TDLS peer STA, mark it with a new flag in both nl80211 and\nmac80211. Before adding a peer, make sure the wiphy supports TDLS and\nour operating mode is appropriate (managed).\n\nIn addition, make sure all peers are removed on disassociation.\n\nA TDLS peer is first added just before link setup is initiated. In later\nsetup stages we have more info about peer supported rates, capabilities,\netc. This info is reported via nl80211_set_station().\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "109086ce0b0f94760bdb0e8e2566ff8a2d673639", "tree": "217a3d18f203fe1cf8652f9b33c4ade1f61594c2", "parents": [ "a76011e2cbb6915f60488477311e0f269cee6496" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:50 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:05 2011 -0400" }, "message": "nl80211: support sending TDLS commands/frames\n\nAdd support for sending high-level TDLS commands and TDLS frames via\nNL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add\nappropriate cfg80211 callbacks for lower level drivers.\n\nAdd wiphy capability flags for TDLS support and advertise them via\nnl80211.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e9f935e3e8dc0bddd0df6d148165d95925422502", "tree": "bbb5de5434d0dd0aa7a1b5894320b17ebee434b8", "parents": [ "8ebafde00ed0c682fed8c34ac5ba90160ea0bb30" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Sun Sep 25 14:53:30 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:34:10 2011 -0400" }, "message": "nl80211/cfg80211: Add support to disable CCK rate for management frame\n\nAdd a new nl80211 attribute to specify whether to send the management\nframes in CCK rate or not. As of now the wpa_supplicant is disabling\nCCK rate at P2P init itself. So this patch helps to send P2P probe\nrequest/probe response/action frames being sent at non CCK rate in 2GHz\nwithout disabling 11b rates.\n\nThis attribute is used with NL80211_CMD_TRIGGER_SCAN and\nNL80211_CMD_FRAME commands to disable CCK rate for management frame\ntransmission.\n\nCc: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c9df56b48e4ff003eaebd680ec7a45342dcd03ea", "tree": "b943ce5010290a4979a1488d791a5e6663db02a4", "parents": [ "2981808269941490f209b2db88ae021d7007b39d" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Fri Sep 16 18:56:23 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:14 2011 -0400" }, "message": "cfg80211/nl80211: Add PMKSA caching candidate event\n\nWhen the driver (or most likely firmware) decides which AP to use\nfor roaming based on internal scan result processing, user space\nneeds to be notified of PMKSA caching candidates to allow RSN\npre-authentication to be used.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "910868db3f114df32387a9c51a729b2645febe4d", "tree": "00b0a9df523665670cf1a28c6fbcba39ae19e9a3", "parents": [ "bd1a272806e6554c54959f2b46f6d40c182468c0" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Sep 11 09:46:55 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 16 16:36:35 2011 -0400" }, "message": "nl80211/cfg80211/mac80211: fix wme docs\n\nAdd/fix some missing docs.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a1f1c21c181be20a8b7e073e5292ff1fe77769fa", "tree": "8b8e46d1dba26f4ef45d4e4d969cbda524d8a4c1", "parents": [ "cedb5412baeffd7326fc4869aa996d7f68d98ebb" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Aug 31 16:01:48 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:53:45 2011 -0400" }, "message": "nl80211/cfg80211: add match filtering for sched_scan\n\nIntroduce filtering for scheduled scans to reduce the number of\nunnecessary results (which cause useless wake-ups).\n\nAdd a new nested attribute where sets of parameters to be matched can\nbe passed when starting a scheduled scan. Only scan results that\nmatch any of the sets will be returned.\n\nAt this point, the set consists of a single parameter, an SSID. This\ncan be easily extended in the future to support more complex matches.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cedb5412baeffd7326fc4869aa996d7f68d98ebb", "tree": "6b5f5c0c034e508b0bff1f7d52cf1aabde5fad3b", "parents": [ "4690c33df6be8bf78a0d5fe58baae33462b0bc1f" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Wed Aug 31 11:29:43 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:50:56 2011 -0400" }, "message": "nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag\n\nadd WIPHY_FLAG_AP_UAPSD flag to indicate uapsd support on\nAP mode.\n\nAdvertise it to userspace by including a new\nNL80211_ATTR_SUPPORT_AP_UAPSD attribute.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f4b34b550a5428345f3794e62de48ad5a3db3954", "tree": "50d5c3b482bd018069fdde870f0c472808156070", "parents": [ "f0425beda4d404a6e751439b562100b902ba9c98" ], "author": { "name": "Vivek Natarajan", "email": "nataraja@qca.qualcomm.com", "time": "Mon Aug 29 14:23:03 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:42:31 2011 -0400" }, "message": "cfg80211/nl80211: Indicate roaming feature capability to userspace.\n\nWhen the rssi of the current AP drops, both wpa_supplicant and the\nfirmware may do a background scan to find a better AP and try to\nassociate. Since firmware based roaming is faster, inform\nwpa_supplicant to avoid roaming and let the firmware decide to\nroam if necessary.\n\nFor fullmac drivers like ath6kl, it is just enough to provide the\nESSID and the firmware will decide on the BSSID. Since it is not\npossible to do pre-auth during roaming for fullmac drivers, the\nwpa_supplicant needs to completely disconnect with the old AP and\nreconnect with the new AP. This consumes lot of time and it is\nbetter to leave the roaming decision to the firmware.\n\nSigned-off-by: Vivek Natarajan \u003cnataraja@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c75786c9ef9e726dc139325a775e90a684b00ed7", "tree": "90ea19402f4f63217f79410a2909c0c943851927", "parents": [ "a21fa87e3a3a8390f17f53967baa574f4e1e1e76" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Tue Aug 23 14:37:46 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 26 10:47:56 2011 -0400" }, "message": "nl80211/cfg80211: add STA WME parameters\n\nAdd new NL80211_ATTR_STA_WME nested attribute that contains\nwme params needed by the low-level driver (uapsd_queues and\nmax_sp).\n\nAdd these params to the station_parameters struct as well.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "16dd7267f460739b3e29d984e73f05c5ffe2b142", "tree": "2902dddb8d8ef045ae64bff734eb400bf8a23fb7", "parents": [ "0507e159a2b590666982b53ecf6fb2843a5bb423" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:11 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:43 2011 -0400" }, "message": "{nl,cfg,mac}80211: let userspace make meshif mesh gate\n\nAllow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute,\nwhich will advertise this mesh node as being a mesh gate.\nNL80211_HWMP_ROOTMODE must be set or this will do nothing.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0507e159a2b590666982b53ecf6fb2843a5bb423", "tree": "a5c0aefae3ea789fb1b0ef9019372e534b93aecc", "parents": [ "699403dbd41998a56d1d92d612ac261e5085a99f" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:10 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:43 2011 -0400" }, "message": "{nl,cfg,mac}80211: let userspace set RANN interval\n\nAllow userspace to set Root Announcement Interval for our mesh\ninterface. Also, RANN interval is now in proper units of TUs.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9946ecfb510462e59afddb2a992da804d58b6bcd", "tree": "2eb7792cf6363f33f41d0532cb218ad86120f3bb", "parents": [ "5fb628e9105eef6796789b1ae93289e1566ccdf0" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:55:56 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:04 2011 -0400" }, "message": "nl80211/cfg80211: Add extra IE configuration to AP mode setup\n\nThe NL80211_CMD_NEW_BEACON command is, in practice, requesting AP mode\noperations to be started. Add new attributes to provide extra IEs\n(e.g., WPS IE, P2P IE) for drivers that build Beacon, Probe Response,\nand (Re)Association Response frames internally (likely in firmware).\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5fb628e9105eef6796789b1ae93289e1566ccdf0", "tree": "3d1e9eef06be596bdd0ab936b8527202afac42e7", "parents": [ "32e9de846be885444358b67267f837088c05e0c2" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:54:35 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:04 2011 -0400" }, "message": "nl80211/cfg80211: Add crypto settings into NEW_BEACON\n\nThis removes need from drivers to parse the beacon tail/head data\nto figure out what crypto settings are to be used in AP mode in case\nthe Beacon and Probe Response frames are fully constructed in the\ndriver/firmware.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "32e9de846be885444358b67267f837088c05e0c2", "tree": "181a4b23ab44337fdb72e7e0f5f1c0874154f21f", "parents": [ "0879fa44b54101c9955123582018cb511047a2b6" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:53:31 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:03 2011 -0400" }, "message": "nl80211/cfg80211: Allow SSID to be specified in new beacon command\n\nThis makes it easier for drivers that generate Beacon and Probe Response\nframes internally (in firmware most likely) in AP mode.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d3ec4844d449cf7af9e749f73ba2052fb7b72fc2", "tree": "c515913e85f7e50878c83da2a88bc5a7269d087c", "parents": [ "0003230e8200699860f0b10af524dc47bf8aecad", "df2e301fee3c2c2a87592151397ad7699bb14c37" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jul 25 13:56:39 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Jul 25 13:56:39 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)\n fs: Merge split strings\n treewide: fix potentially dangerous trailing \u0027;\u0027 in #defined values/expressions\n uwb: Fix misspelling of neighbourhood in comment\n net, netfilter: Remove redundant goto in ebt_ulog_packet\n trivial: don\u0027t touch files that are removed in the staging tree\n lib/vsprintf: replace link to Draft by final RFC number\n doc: Kconfig: `to be\u0027 -\u003e `be\u0027\n doc: Kconfig: Typo: square -\u003e squared\n doc: Konfig: Documentation/power/{pm \u003d\u003e apm-acpi}.txt\n drivers/net: static should be at beginning of declaration\n drivers/media: static should be at beginning of declaration\n drivers/i2c: static should be at beginning of declaration\n XTENSA: static should be at beginning of declaration\n SH: static should be at beginning of declaration\n MIPS: static should be at beginning of declaration\n ARM: static should be at beginning of declaration\n rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check\n Update my e-mail address\n PCIe ASPM: forcedly -\u003e forcibly\n gma500: push through device driver tree\n ...\n\nFix up trivial conflicts:\n - arch/arm/mach-ep93xx/dma-m2p.c (deleted)\n - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)\n - drivers/net/r8169.c (just context changes)\n" }, { "commit": "34850ab25d74ab4eead62c3b4a9e8036a25cc669", "tree": "c1aa56f2d94851804969b71523ade13bb9db693c", "parents": [ "0b5dd734d3545a9833c0bceeed5088ad9a1ca5e3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Jul 18 18:08:35 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 19 16:49:58 2011 -0400" }, "message": "cfg80211: allow userspace to control supported rates in scan\n\nSome P2P scans are not allowed to advertise\n11b rates, but that is a rather special case\nso instead of having that, allow userspace\nto request the rate sets (per band) that are\nadvertised in scan probe request frames.\n\nSince it\u0027s needed in two places now, factor\nout some common code parsing a rate array.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5a865bad44984de245d20bfb7cff99993e8e8294", "tree": "f4a73c454eddd082e397d53a8467e4a92fd28ee3", "parents": [ "93b6aa693a355932b69c96956596b03f91baec35" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Jul 13 14:57:29 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 15 13:38:30 2011 -0400" }, "message": "nl80211/cfg80211: add max_sched_scan_ie_len in the hw description\n\nSome chips may support different lengths of user-supplied IEs with a\nsingle scheduled scan command than with a single normal scan command.\n\nTo support this, this patch creates a separate hardware description\nelement that describes the maximum size of user-supplied information\nelement data supported in scheduled scans.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "93b6aa693a355932b69c96956596b03f91baec35", "tree": "882cf301349f62c68fcd4df765447cbb969ef67a", "parents": [ "77dbbb138986b26cb99f868d4b6410577ef4c040" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Jul 13 14:57:28 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 15 13:38:29 2011 -0400" }, "message": "nl80211/cfg80211: add max_sched_scan_ssids in the hw description\n\nSome chips can scan more SSIDs with a single scheduled scan command\nthan with a single normal scan command (eg. wl12xx chips).\n\nTo support this, this patch creates a separate hardware description\nelement that describes the amount of SSIDs supported in scheduled\nscans.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "77dbbb138986b26cb99f868d4b6410577ef4c040", "tree": "e3f4f9a2bb6b36938e3b221f4f0ee2e74d1ab238", "parents": [ "95acac61ba66c4abd40e038dae8c1ed2e176c7b1" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Jul 13 10:48:55 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 15 13:38:28 2011 -0400" }, "message": "nl80211: advertise GTK rekey support, new triggers\n\nSince we now have the necessary API in place to support\nGTK rekeying, applications will need to know whether it\nis supported by a device. Add a pseudo-trigger that is\nused only to advertise that capability. Also, add some\nnew triggers that match what iwlagn devices can do.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1a84ff7564ae43dd1ea20e17f867de2700ca5b5b", "tree": "d49c7eece59a016b2bdf9c43bc86bfcd46472708", "parents": [ "331c5ea2d92c76bfe58a9bb5e6d21160850a29bc" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Fri Jul 08 11:16:16 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 08 11:47:54 2011 -0400" }, "message": "cfg80211: return -ENOENT when stopping sched_scan while not running\n\nIf we try to stop a scheduled scan while it is not running, we should\nreturn -ENOENT instead of simply ignoring the command and returning\nsuccess. This is more consistent with other parts of the code.\n\nReported-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "eb032b9837a958e21ca000358a5bde5e17192ddb", "tree": "880af47c607f37f134510a32e3499ce0365e0ef5", "parents": [ "8072ba1ba7fe9f48ad9f424829863214484dfc2f" ], "author": { "name": "Michael Büsch", "email": "m@bues.ch", "time": "Mon Jul 04 20:50:05 2011 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Thu Jul 07 15:18:01 2011 +0200" }, "message": "Update my e-mail address\n\nSigned-off-by: Michael Buesch \u003cm@bues.ch\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "e5497d766adb92bcbd1fa4a147e188f84f34b20a", "tree": "f5d41f4272b78b8c61a80c22389f6d4b24e65b34", "parents": [ "830af02f24fbc087999b757b8eca51829c67fa6f" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Jul 05 16:35:40 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 06 15:05:42 2011 -0400" }, "message": "cfg80211/nl80211: support GTK rekey offload\n\nIn certain circumstances, like WoWLAN scenarios,\ndevices may implement (partial) GTK rekeying on\nthe device to avoid waking up the host for it.\n\nIn order to successfully go through GTK rekeying,\nthe KEK, KCK and the replay counter are required.\n\nAdd API to let the supplicant hand the parameters\nto the driver which may store it for future GTK\nrekey operations.\n\nNote that, of course, if GTK rekeying is done by\nthe device, the EAP frame must not be passed up\nto userspace, instead a rekey event needs to be\nsent to let userspace update its replay counter.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e00cf3b9eb7839b952e434a75bff6b99e47337ac", "tree": "ef583ab8ac09bf703026650d4bc7777e6a3864d3", "parents": [ "1a8218e96271790a07dd7065a2ef173e0f67e328", "3b8ab88acaceb505aa06ef3bbf3a73b92470ae78" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:55:42 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 19:32:19 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-agn-tx.c\n\tnet/mac80211/sta_info.h\n" }, { "commit": "57cf8043a64b56a10b9f194572548a3dfb62e596", "tree": "a0b9530e824c7e7b1417e20f87e800819abfe285", "parents": [ "108697c44b8e50bea3505c6bf9667da4627cb2d5" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Fri May 13 10:45:43 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:10:49 2011 -0400" }, "message": "nl80211: Move peer link state definition to nl80211\n\nThese definitions need to be exposed now that we can set the peer link\nstates via NL80211_ATTR_STA_PLINK_STATE. They were already being\n(opaquely) reported by NL80211_STA_INFO_PLINK_STATE.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7527a782e187d1214a5b3dc2897ce441033bb4ef", "tree": "3310adf988e72cb91736c0638d4c17edcccebfe1", "parents": [ "805d7d23ef9806e47b550ad80270c4cea4ffc984" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri May 13 10:58:57 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon May 16 14:10:40 2011 -0400" }, "message": "cfg80211: advertise possible interface combinations\n\nAdd the ability to advertise interface combinations in nl80211.\nThis allows the driver to indicate what the combinations are\nthat it supports. \"Combinations\" of just a single interface are\nimplicit, as previously. Note that cfg80211 will enforce that\nthe restrictions are met, but not for all drivers yet (once all\ndrivers are updated, we can remove the flag and enforce for all).\n\nWhen no combinations are actually supported, an empty list will\nbe exported so that userspace can know if the kernel exported\nthis info or not (although it isn\u0027t clear to me what tools using\nthe info should do if the kernel didn\u0027t export it).\n\nSince some interface types are purely virtual/software and don\u0027t\nfit the restrictions, those are exposed in a new list of pure SW\ntypes, not subject to restrictions. This mainly exists to handle\nAP-VLAN and monitor interfaces in mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bbe6ad6dcb1eb26bd12ec85320f402721c3383ae", "tree": "08e7e3491caa30e22c9c38d9d3a8728a02adc0c5", "parents": [ "79f460ca49d8d5700756ab7071c951311c7f29cc" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed May 11 17:09:37 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 15:12:27 2011 -0400" }, "message": "cfg80211/nl80211: add interval attribute for scheduled scans\n\nIntroduce NL80211_ATTR_SCHED_SCAN_INTERVAL as a required attribute for\nNL80211_CMD_START_SCHED_SCAN. This value informs the driver at which\nintervals the scheduled scan cycles should be executed.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "807f8a8c300435d5483e8d78df9dcdbc27333166", "tree": "1537d40e149d7a8712fe63d17ea3b51093bf03a1", "parents": [ "6bdbdbf4a151a3a1333818cd17a7d7795e936041" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed May 11 17:09:35 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 15:12:26 2011 -0400" }, "message": "cfg80211/nl80211: add support for scheduled scans\n\nImplement new functionality for scheduled scan offload. With this feature we\ncan scan automatically at certain intervals.\n\nThe idea is that the hardware can perform scan automatically and filter on\ndesired results without waking up the host unnecessarily.\n\nAdd NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN\ncommands to the nl80211 interface. When results are available they are\nreported by NL80211_CMD_SCHED_SCAN_RESULTS events. The userspace is\ninformed when the scheduled scan has stopped with a\nNL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by\nthe driver or by a call to NL80211_CMD_STOP_SCHED_SCAN.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9c3990aaec0ad9f686ef6480f6861f2df89b2a7a", "tree": "5e073ffce0ce0aed45e9dfeb9f41efc140c770f7", "parents": [ "0a35d36d6f019bde6c98812456798275b02e5aee" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:11 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:44:46 2011 -0400" }, "message": "nl80211: Let userspace drive the peer link management states.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b130e5cec958bae3867cf6ab09a9b24ba8fada01", "tree": "945eca0ace3d299dfd83de7b7e13c60aa36ba2e9", "parents": [ "f3a57fd148a4afd3c38f558c5b44972cb29ea8ba" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue May 03 16:57:07 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 11 14:37:47 2011 -0400" }, "message": "nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPE\n\nIntroduce a new configuration option to support AMPE from userspace.\n\nPrior to this series we only supported authentication in userspace: an\nauthentication daemon would authenticate peer candidates in userspace\nand hand them over to the kernel. From that point the mesh stack would\ntake over and establish a peer link (Mesh Peering Management).\n\nThese patches introduce support for Authenticated Mesh Peering Exchange\nin userspace. The userspace daemon implements the AMPE protocol and on\nsuccessfull completion create mesh peers and install encryption keys.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ff1b6e69ad4f31fb3c9c6da2665655f2e798dd70", "tree": "6fc049fd0389ffb382ea401096d7bd665642af5c", "parents": [ "8f7f3b2fcc4ccbba0be776049df41a2f96c986ac" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed May 04 15:37:28 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu May 05 14:59:19 2011 -0400" }, "message": "nl80211/cfg80211: WoWLAN support\n\nThis is based on (but now quite far from) the\noriginal work from Luis and Eliad. Add support\nfor configuring WoWLAN triggers, and getting\nthe configuration out again. Changes from the\noriginal patchset are too numerous to list,\nbut one important change needs highlighting:\nthe suspend() callback is passed NULL for the\ntrigger configuration if userspace has not\nconfigured WoWLAN at all.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cfef6047c4027a8448ec8dafeaf2bb362cc882e4", "tree": "c254bd25aa8b4b0696b5b5cc45d8e30c7c1bb9dd", "parents": [ "b71d1d426d263b0b6cb5760322efebbfc89d4463", "73b48099cc265f88fa1255f3f43e52fe6a94fd5c" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:34:25 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 25 14:34:25 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-core.c\n\tdrivers/net/wireless/rt2x00/rt2x00queue.c\n\tdrivers/net/wireless/rt2x00/rt2x00queue.h\n" }, { "commit": "ebe27c91af8b7f4810ae906fbd3eeb2d87850026", "tree": "eff1fe0dbb8ecb4b116d8f96c6beb3eda1c52c7a", "parents": [ "f60c49b67dd6db2ccb740a6a671414f9dab00c4f" ], "author": { "name": "Mohammed Shafi Shajakhan", "email": "mshajakhan@atheros.com", "time": "Fri Apr 08 21:24:24 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:58:47 2011 -0400" }, "message": "{mac|nl}80211: Add station connected time\n\nAdd station connected time in debugfs. This will be helpful to get a\nmeasure of stability of the connection and for debugging stress issues\n\nCc: Senthilkumar Balasubramanian \u003cSenthilkumar.Balasubramanian@Atheros.com\u003e\nSigned-off-by: Mohammed Shafi Shajakhan \u003cmshajakhan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c93b5e717ec47b57abfe0229360bc11e77520984", "tree": "1e6f703c3c1b1c2e55b759b4e992ef04e81f973e", "parents": [ "96b78dff0321d881ef27d858a462c476e0444619" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:34 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:39 2011 -0400" }, "message": "nl80211: New notification to discover mesh peer candidates.\n\nNotify userspace when a beacon/presp is received from a suitable mesh\npeer candidate for whom no sta information exists. Userspace can then\ndecide to create a sta info for the candidate. If userspace is not\nready to authenticate the peer right away, it can create the sta info\nwith the authenticated flag unset and set it later.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b39c48fac1fc915a5dcd024bf6e9aabc855ed591", "tree": "d8c5d6e987f388b8c8769d16a51a07dfcd9c3539", "parents": [ "5cff5e01e818029a5d2c3c31b7ae5e5e7ee70452" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:30 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:38 2011 -0400" }, "message": "nl80211/mac80211: let userspace authenticate stations\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "15d5dda623139bbf6165030fc251bbd5798f4130", "tree": "3adb84ef7d65fd274008d950ad99434e1a3a28a7", "parents": [ "581a8b0feeed8877aab3a8ca4c972419790cd07f" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:28 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "cfg80211/nl80211: Add userspace authentication flag to mesh setup\n\nDuring mesh setup, use NL80211_MESH_SETUP_USERSPACE_AUTH flag to create\na secure mesh and route management frames to userspace.\n\nAlso, NL80211_CMD_GET_WIPHY now returns a flag NL80211_SUPPORT_MESH_AUTH\nif the wiphy\u0027s mesh implementation supports routing of mesh auth frames\nto userspace. This is useful for forward compatibility between old\nkernels and new userspace tools.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "581a8b0feeed8877aab3a8ca4c972419790cd07f", "tree": "36ef0e86b367e0abeb0a50fbf59840f125efdbc7", "parents": [ "a22e93f5d819f11d2a2d6332e20ff5b462e5c208" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Apr 07 15:08:27 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:57:37 2011 -0400" }, "message": "nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE\n\nTo NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie\ninto a mesh beacon, not simply path selection ies.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "252f4bf400df1712408fe83ba199a66a1b57ab1d", "tree": "e07fa00abdd55b31e22567786c78635f32c6a66c", "parents": [ "6ba1037c3d871ab70e342631516dbf841c35b086", "b37e3b6d64358604960b35e8ecbb7aed22e0926e" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:18:44 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 12 16:18:44 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/ath/ar9170/main.c\n\tdrivers/net/wireless/ath/ar9170/phy.c\n\tdrivers/net/wireless/zd1211rw/zd_rf_rf2959.c\n" }, { "commit": "f4263c9857e6411ef2388868cc6c79a1602a654e", "tree": "2eec220076c4d56a2460e185076cda6646ef2f9f", "parents": [ "8447c163afeaa7e9f6f015088177b1c8511e0877" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Thu Mar 31 09:25:41 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 07 15:34:12 2011 -0400" }, "message": "nl80211: Add BSS parameters to station\n\nThis allows user-space monitoring of BSS parameters for the associated\nstation. This is useful for debugging and verifying that the paramaters\nare as expected.\n\n[Exactly the same as before but bundled into a single message]\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "25985edcedea6396277003854657b5f3cb31a628", "tree": "f026e810210a2ee7290caeb737c23cb6472b7c38", "parents": [ "6aba74f2791287ec407e0f92487a725a25908067" ], "author": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Wed Mar 30 22:57:33 2011 -0300" }, "committer": { "name": "Lucas De Marchi", "email": "lucas.demarchi@profusion.mobi", "time": "Thu Mar 31 11:26:23 2011 -0300" }, "message": "Fix common misspellings\n\nFixes generated by \u0027codespell\u0027 and manually reviewed.\n\nSigned-off-by: Lucas De Marchi \u003clucas.demarchi@profusion.mobi\u003e\n" }, { "commit": "c8dcfd8a046c1f49af0c15726761af17b957962d", "tree": "f021e2f1b9587c1f9b6c871c75881e81422ad280", "parents": [ "e7a2a4f5e61ccfae03185384e06b852dbb1e3630" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sun Feb 27 22:08:00 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 01 13:48:21 2011 -0500" }, "message": "cfg80211: add a field for the bitrate of the last rx data packet from a station\n\nAlso fix a typo in the STATION_INFO_TX_BITRATE description\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "45007fd590c6b099cec5d36ea7056b00f8b4916a", "tree": "ebf700a9f90f23f1f297d15176ea888cf8dd8242", "parents": [ "f52555a4b2d229079155e6642ec09afa63d10cab" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Jan 06 22:36:46 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jan 10 15:40:52 2011 -0500" }, "message": "nl80211: add/fix mesh docs\n\nSome mesh attribute/command docs are missing or\nhave errors in the name so they don\u0027t match, fix\nall of them.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "39fd5de4472b7b222c6cec78d72b069133f694e4", "tree": "81dd5a546598a1b09d3a48ca0f001b375ad91acb", "parents": [ "7f531e03abf0162df3966c4fa5fa6fdd9302cb6b" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 16 11:30:28 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:49:47 2010 -0500" }, "message": "nl80211: Export available antennas\n\nExport the information which antennas are available for configuration as TX or\nRX antennas via nl80211.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c80d545da3f7c0e534ccd4a780f322f80a92cff1", "tree": "edd5c51676b4677fc1a0b2fc692ffe97df863f25", "parents": [ "24bdd9f4c9af75b33b438d60381a67626de0128d" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:49 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Let userspace enable and configure vendor specific path selection.\n\nUserspace will now be allowed to toggle between the default path\nselection algorithm (HWMP, implemented in the kernel), and a vendor\nspecific alternative. Also in the same patch, allow userspace to add\ninformation elements to mesh beacons. This is accordance with the\nExtensible Path Selection Framework specified in version 7.0 of the\n802.11s draft.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24bdd9f4c9af75b33b438d60381a67626de0128d", "tree": "f5ff8c4f9ec2a7cdb976f419532179f2c46b06e8", "parents": [ "8a09d6d80c90c02f2f8c89f69c702cab0c8d9b42" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Thu Dec 16 17:37:48 2010 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 20 14:46:57 2010 -0500" }, "message": "mac80211: Rename mesh_params to mesh_config to prepare for mesh_setup\n\nMesh parameters can be to setup a mesh or to configure it.\nThis patch renames the ambiguous name mesh_params to mesh_config\nin preparation for mesh_setup.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cf4e594ea7e55555e81647b74a3a8e8b2826a529", "tree": "794013429d9613ef253111fb50f993600ab14a55", "parents": [ "5928b91acae97622a6f2e679eb7a9f19bed68e3e" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Dec 16 00:52:40 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 16 15:22:30 2010 -0500" }, "message": "nl80211: Add notification for dropped Deauth/Disassoc\n\nAdd a new notification to indicate that a received, unprotected\nDeauthentication or Disassociation frame was dropped due to\nmanagement frame protection being in use. This notification is\nneeded to allow user space (e.g., wpa_supplicant) to implement\nSA Query procedure to recover from association state mismatch\nbetween an AP and STA.\n\nThis is needed to avoid getting stuck in non-working state when MFP\n(IEEE 802.11w) is used and a protected Deauthentication or\nDisassociation frame is dropped for any reason. After that, the\nstation would silently discard any unprotected Deauthentication or\nDisassociation frame that could be indicating that the AP does not\nhave association for the STA (when the Reason Code would be 6 or 7).\nIEEE Std 802.11w-2009, 11.13 describes this recovery mechanism.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a293911d4fd5e8593dbf478399a77f990d466269", "tree": "826f614f178e915c4d2c08aba9ca5b2a38f78c75", "parents": [ "14a085e77063090fb12ad391d0f4d46e593be225" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Dec 14 17:54:28 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 15 17:03:56 2010 -0500" }, "message": "nl80211: advertise maximum remain-on-channel duration\n\nWith the upcoming hardware offload implementation,\nsome devices will have a different maximum duration\nfor the remain-on-channel command. Advertise the\nmaximum duration in mac80211, and make mac80211 set\nit.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed", "tree": "71e61430bd8593f2ad8f1c741b5a8a8be4a9d690", "parents": [ "897bed8b4320774e56f282cdc1cceb4d77442797" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Dec 09 19:58:59 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 13 15:23:28 2010 -0500" }, "message": "cfg80211/nl80211: separate unicast/multicast default TX keys\n\nAllow userspace to specify that a given key\nis default only for unicast and/or multicast\ntransmissions. Only WEP keys are for both,\nWPA/RSN keys set here are GTKs for multicast\nonly. For more future flexibility, allow to\nspecify all combiations.\n\nWireless extensions can only set both so use\nnl80211; WEP keys (connect keys) must be set\nas default for both (but 802.1X WEP is still\npossible).\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "50b12f597be354a5a224f05c65c54c0667e57aec", "tree": "db4c59639d3d1bc013a2c3d7e17c47db2f94efc0", "parents": [ "7659a193f94c0003dd06e9e874d19bade1a8c952" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Fri Nov 19 12:40:25 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 08 15:38:43 2010 -0500" }, "message": "cfg80211: Add new BSS attribute ht_opmode\n\nAdd a new BSS attribute to allow hostapd to set the current HT opmode.\nOtherwise drivers won\u0027t be able to set up protection for HT rates in\nAP mode.\n\nCc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "541a45a142df281c974d74eac2066138fc107b23", "tree": "b96f4808c3f17f2f560db9569ca2b08dba9eab67", "parents": [ "22de94de7de78b8de2fb1f2df5aa85b5556cfcfd" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Thu Dec 02 19:12:43 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 07 16:09:12 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\n--\nv2:\tfix ABI breakage and change factor to be a power of 2.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "29cbe68c516a48a9a88b3226878570c6cbd83c02", "tree": "4774f8a3a244236234a521baa4d1ae5b3e1494ba", "parents": [ "bd90fdcc5fbd99a2a778999610420cf793bd1be2" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Dec 03 09:20:44 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:29 2010 -0500" }, "message": "cfg80211/mac80211: add mesh join/leave commands\n\nInstead of tying mesh activity to interface up,\nadd join and leave commands for mesh. Since we\nmust be backward compatible, let cfg80211 handle\njoining a mesh if a mesh ID was pre-configured\nwhen the device goes up.\n\nNote that this therefore must modify mac80211 as\nwell since mac80211 needs to lose the logic to\nstart the mesh on interface up.\n\nWe now allow querying mesh parameters before the\nmesh is connected, which simply returns defaults.\nSetting them (internally renamed to \"update\") is\nonly allowed while connected. Specify them with\nthe new mesh join command instead where needed.\n\nIn mac80211, beaconing must now also follow the\nmesh enabled/not enabled state, which is done\nby testing the mesh ID.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "45904f21655cf4f0ae7d0fab5906fe51bf56ecf4", "tree": "fd023d65b881b6cfcf1529eed7c1ad2523c166e1", "parents": [ "b9e61f11f47035e3b4545b51fb547fef48eb3096" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Fri Dec 03 09:20:40 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 06 16:01:28 2010 -0500" }, "message": "nl80211/mac80211: define and allow configuring mesh element TTL\n\nThe TTL in path selection information elements is different from\nthe mesh ttl used in mesh data frames. Version 7.03 of the 11s\ndraft calls this ttl \u0027Element TTL\u0027.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f7ca38dfe58c20cb1aa2ed9643187e8b194b5bae", "tree": "42db54588fd5fa769a16def75708117903577b40", "parents": [ "9a67d761b39614c0495dcab9a204e21a9f4c4d31" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 25 10:02:29 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 29 15:24:35 2010 -0500" }, "message": "nl80211/cfg80211: extend mgmt-tx API for off-channel\n\nWith p2p, it is sometimes necessary to transmit\na frame (typically an action frame) on another\nchannel than the current channel. Enable this\nthrough the CMD_FRAME API, and allow it to wait\nfor a response. A new command allows that wait\nto be aborted.\n\nHowever, allow userspace to specify whether or\nnot it wants to allow off-channel TX, it may\nactually want to use the same channel only.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c063dbf52b998b852122dff07a8b8dd430b38437", "tree": "b27cc73fa8a1d9ed8fb5b0a1306e8194e18662a9", "parents": [ "79b1c460a0b55e55981c25c56597c4d5d2872de3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Nov 24 08:10:05 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:19:36 2010 -0500" }, "message": "cfg80211: allow using CQM event to notify packet loss\n\nThis adds the ability for drivers to use CQM events\nto notify about packet loss for specific stations\n(which could be the AP for the managed mode case).\nSince the threshold might be determined by the\ndriver (it isn\u0027t passed in right now) it will be\npassed out of the driver to userspace in the event.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ccb14354017272ddac002e859a2711610b6af174", "tree": "fa39f9b944508e596763c49b0088dc1cc2e263ca", "parents": [ "f8afa42b01c7a9f45b7cbaadb0481a0eeb96f18d" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 24 16:18:36 2010 -0500" }, "message": "Revert \"nl80211/mac80211: Report signal average\"\n\nThis reverts commit 86107fd170bc379869250eb7e1bd393a3a70e8ae.\n\nThis patch inadvertantly changed the userland ABI.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "86107fd170bc379869250eb7e1bd393a3a70e8ae", "tree": "579ee24be87e94246450420f4de57d8eda942848", "parents": [ "eef39befaae2a1559efe197d795c376a317af2af" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Tue Nov 16 10:58:48 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Nov 18 14:22:20 2010 -0500" }, "message": "nl80211/mac80211: Report signal average\n\nExtend nl80211 to report an exponential weighted moving average (EWMA) of the\nsignal value. Since the signal value usually fluctuates between different\npackets, an average can be more useful than the value of the last packet.\n\nThis uses the recently added generic EWMA library function.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "885a46d0f7942d76c2f3860acb45f75237d3bb42", "tree": "f116fcc9b8204f7a113693e307de76e4098ebb36", "parents": [ "a619a4c0e1fd4e8c360c63d0df3fa0a401107d69" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Thu Nov 11 15:07:22 2010 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:39:08 2010 -0500" }, "message": "cfg80211: add support for setting the ad-hoc multicast rate\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "afe0cbf87500f0585d217deb8c6fd329793a7957", "tree": "a7e4f6db468e623961ab2b71ccf2bfb9c6756894", "parents": [ "0e67d6cb753643fc076a90fa9309301b3fbfb8db" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Nov 10 12:50:50 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 16 16:37:05 2010 -0500" }, "message": "cfg80211: Add nl80211 antenna configuration\n\nAllow setting of TX and RX antennas configuration via nl80211.\n\nThe antenna configuration is defined as a bitmap of allowed antennas to use.\nThis API can be used to mask out antennas which are not attached or should not\nbe used for other reasons like regulatory concerns or special setups.\n\nSeparate bitmaps are used for RX and TX to allow configuring different antennas\nfor receiving and transmitting. Each bitmap is 32 bit long, each bit\nrepresenting one antenna, starting with antenna 1 at the first bit. If an\nantenna bit is set, this means the driver is allowed to use this antenna for RX\nor TX respectively; if the bit is not set the hardware is not allowed to use\nthis antenna.\n\nUsing bitmaps has the benefit of allowing for a flexible configuration\ninterface which can support many different configurations and which can be used\nfor 802.11n as well as non-802.11n devices. Instead of relying on some hardware\nspecific assumptions, drivers can use this information to know which antennas\nare actually attached to the system and derive their capabilities based on\nthat.\n\n802.11n devices should enable or disable chains, based on which antennas are\npresent (If all antennas belonging to a particular chain are disabled, the\nentire chain should be disabled). HT capabilities (like STBC, TX Beamforming,\nAntenna selection) should be calculated based on the available chains after\napplying the antenna masks. Should a 802.11n device have diversity antennas\nattached to one of their chains, diversity can be enabled or disabled based on\nthe antenna information.\n\nNon-802.11n drivers can use the antenna masks to select RX and TX antennas and\nto enable or disable antenna diversity.\n\nWhile covering chainmasks for 802.11n and the standard \"legacy\" modes \"fixed\nantenna 1\", \"fixed antenna 2\" and \"diversity\" this API also allows more rare,\nbut useful configurations as follows:\n\n1) Send on antenna 1, receive on antenna 2 (or vice versa). This can be used to\nhave a low gain antenna for TX in order to keep within the regulatory\nconstraints and a high gain antenna for RX in order to receive weaker signals\n(\"speak softly, but listen harder\"). This can be useful for building long-shot\noutdoor links. Another usage of this setup is having a low-noise pre-amplifier\non antenna 1 and a power amplifier on the other antenna. This way transmit\nnoise is mostly kept out of the low noise receive channel.\n(This would be bitmaps: tx 1 rx 2).\n\n2) Another similar setup is: Use RX diversity on both antennas, but always send\non antenna 1. Again that would allow us to benefit from a higher gain RX\nantenna, while staying within the legal limits.\n(This would be: tx 0 rx 3).\n\n3) And finally there can be special experimental setups in research and\ndevelopment even with pre 802.11n hardware where more than 2 antennas are\navailable. It\u0027s good to keep the API simple, yet flexible.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\n\n--\nv7:\tMade bitmasks 32 bit wide and rebased to latest wireless-testing.\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ca4ffe8f2848169a8ded0ea8a60b2d81925564c9", "tree": "bfc6dabaf52b07b59c5146e26f71fe5193ddd04c", "parents": [ "749b527b21465fb079796c03ffb4302584dc31c1" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Wed Oct 20 10:18:55 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 15 13:24:10 2010 -0500" }, "message": "cfg80211: fix disabling channels based on hints\n\nAfter a module loads you will have loaded the world roaming regulatory\ndomain or a custom regulatory domain. Further regulatory hints are\nwelcomed and should be respected unless the regulatory hint is coming\nfrom a country IE as the IEEE spec allows for a country IE to be a subset\nof what is allowed by the local regulatory agencies.\n\nSo disable all channels that do not fit a regulatory domain sent\nfrom a unless the hint is from a country IE and the country IE had\nno information about the band we are currently processing.\n\nThis fixes a few regulatory issues, for example for drivers that depend\non CRDA and had no 5 GHz freqencies allowed were not properly disabling\n5 GHz at all, furthermore it also allows users to restrict devices\nfurther as was intended.\n\nIf you recieve a country IE upon association we will also disable the\nchannels that are not allowed if the country IE had at least one\nchannel on the respective band we are procesing.\n\nThis was the original intention behind this design but it was\ncompletely overlooked...\n\nCc: David Quan \u003cdavid.quan@atheros.com\u003e\nCc: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\ncc: Easwar Krishnan \u003ceaswar.krishnan@atheros.com\u003e\nCc: stable@kernel.org\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8610c29a2c9f273886b1c31ae4d92c69d4326262", "tree": "c0424e55a67e0a2a1c7f1d72a9d807c442da5a9c", "parents": [ "15943a72c7d2031c9150917ca9161a9f891d455a" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sat Oct 09 02:39:29 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 11 15:04:20 2010 -0400" }, "message": "cfg80211: add channel utilization stats to the survey command\n\nUsing these, user space can calculate a relative channel utilization\nwith arbitrary intervals by regularly taking snapshots of the survey\nresults.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b206b4ef062d83c0875a085672ed50e8c8b01521", "tree": "f182cc272055f7b646bc62a5d37fb097a8fd07cc", "parents": [ "09be251e9005ebd67e5eabcaad904edb7ecacc55" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Oct 06 18:34:12 2010 +0900" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Oct 06 16:30:43 2010 -0400" }, "message": "nl80211/mac80211: Add retry and failed transmission count to station info\n\nThis information is already available in mac80211, we just need to export it\nvia cfg80211 and nl80211.\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e31b82136d1adc7a599b6e99d3321e5831841f5a", "tree": "c72d78d4cccfd08587e909c7efe59956f1cbc23e", "parents": [ "53f73c09d64f1fa7d7e6e8b6bb7468d42eddc92d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Oct 05 19:39:30 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Oct 06 16:30:40 2010 -0400" }, "message": "cfg80211/mac80211: allow per-station GTKs\n\nThis adds API to allow adding per-station GTKs,\nupdates mac80211 to support it, and also allows\ndrivers to remove a key from hwaccel again when\nthis may be necessary due to multiple GTKs.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "691895e7e2204be9a717809fb78d6ff7c10b470a", "tree": "a261d33e79b7b471f092127e4e57517f1603106e", "parents": [ "970bf9d40c03e48cc34ee2c1a70693a0e0fca3f6" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Oct 05 16:19:42 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:37:52 2010 -0400" }, "message": "nl80211: fix remain-on-channel documentation\n\nThe documentation for NL80211_CMD_REMAIN_ON_CHANNEL\nisn\u0027t accurate, an interface index is required by\nthe command. Update it accordingly.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e8347ebad2f1b15bddb6ed3ed5f767531eb52dc3", "tree": "02fa4846517ea56b06c0c6ad40d5870ca321153a", "parents": [ "e51f3eff9a7e17ddd749799d4291f7e33e9883b9" ], "author": { "name": "Bill Jordan", "email": "bjordan@ig88.(none)", "time": "Fri Oct 01 13:54:28 2010 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:24 2010 -0400" }, "message": "cfg80211: patches to allow setting the WDS peer\n\nAdded a nl interface to set the peer bssid of a WDS interface.\n\nSigned-off-by: Bill Jordan \u003cbjordan@rajant.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "17e5a8082894a4b66cb69e7ec16074f0f01281e1", "tree": "604746f9c4aa8d77c41f1e22e9f553b5cdcfa823", "parents": [ "0bda652300dff8136c9d889f1133462c7c7d332c" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Sep 29 17:15:30 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 05 13:35:22 2010 -0400" }, "message": "nl80211: allow drivers to indicate whether the survey data channel is in use\n\nSome user space applications only want to display survey data for\nthe operating channel, however there is no API to get that yet.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "074ac8df9f93f2a35a356d92fd7f16cd846f0a03", "tree": "b6a77291a1eea9a11862ad78e965c1df29e62d43", "parents": [ "f799a301abf77b87133d624164d28dc2b521e99d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Sep 16 14:58:22 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Sep 16 15:46:06 2010 -0400" }, "message": "cfg80211/nl80211: introduce p2p device types\n\nThis adds P2P-STA and P2P-GO as device types so\nwe can distinguish between those and normal STA\nor AP (respectively) type interfaces.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c0692b8fe29fb4d4dad33487aabf3ed7e1e880c0", "tree": "39c0c74c2270a285e1a0cfc7958ced7368cf28a6", "parents": [ "3ffc2a905b1faae4c0fe39d66f0752c3a4cbb3c7" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Aug 27 14:26:53 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 27 13:27:07 2010 -0400" }, "message": "cfg80211: allow changing port control protocol\n\nSome vendor specified mechanisms for 802.1X-style\nfunctionality use a different protocol than EAP\n(even if EAP is vendor-extensible). Allow setting\nthe ethertype for the protocol when a driver has\nsupport for this. The default if unspecified is\nEAP, of course.\n\nNote: This is suitable only for station mode, not\n for AP implementation.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2a5fb7b088f8418958775774dda9427d6c73c522", "tree": "8636210464e45eea32025d685ddeb367f595b6a0", "parents": [ "633dd1ea683d907af944bcd9814092efe9869b05" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Aug 18 17:44:36 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 24 16:32:04 2010 -0400" }, "message": "nl80211: some documentation fixes\n\nThe nl80211 documentation is currently never\ngenerated, so problems have accumulated. Fix\nmost of the trivial ones.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2e161f78e5f63a7f9fd25a766bb7f816a01eb14a", "tree": "befd44feeb1f47da1f41e6fc310a223ad67030ff", "parents": [ "ac4c977d16d843f12901595c91773dddb65768a9" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Aug 12 15:38:38 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Aug 24 16:27:56 2010 -0400" }, "message": "cfg80211/mac80211: extensible frame processing\n\nAllow userspace to register for more than just\naction frames by giving the frame subtype, and\nmake it possible to use this in various modes\nas well.\n\nWith some tweaks and some added functionality\nthis will, in the future, also be usable in AP\nmode and be able to replace the cooked monitor\ninterface currently used in that case.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98d2ff8bec82fc35fe2008a187a5fef9241dab10", "tree": "5a443d79168c325aad8af755a88eca2a76342816", "parents": [ "fa61cf70a6ae1089e459e4b59b2e8d8e90d8535e" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Wed Jun 23 12:12:38 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jun 24 15:42:37 2010 -0400" }, "message": "nl80211: Add option to adjust transmit power\n\nThis patch adds transmit power setting type and transmit power level attributes\nto NL80211_CMD_SET_WIPHY in order to facilitate adjusting of the transmit power\nlevel of the device.\n\nThe added attributes allow selection of automatic, limited or fixed transmit\npower level, with the level definable in signed mBm format.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fa61cf70a6ae1089e459e4b59b2e8d8e90d8535e", "tree": "1bd81709faaa15fb207de7db4df1ceed96374208", "parents": [ "a185045c8da1ec6627236b4ade0d949b15da43b3" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Wed Jun 23 12:12:37 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jun 24 15:42:33 2010 -0400" }, "message": "cfg80211/mac80211: Update set_tx_power to use mBm instead of dBm units\n\nIn preparation for a TX power setting interface in the nl80211, change the\n.set_tx_power function to use mBm units instead of dBm for greater accuracy and\nsmaller power levels.\n\nAlso, already in advance move the tx_power_setting enumeration to nl80211.\n\nThis change affects the .tx_set_power function prototype. As a result, the\ncorresponding changes are needed to modules using it. These are mac80211,\niwmc3200wifi and rndis_wlan.\n\nCc: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nCc: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nAcked-by: Samuel Ortiz \u003csamuel.ortiz@intel.com\u003e\nAcked-by: Jussi Kivilinna \u003cjussi.kivilinna@mbnet.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "77c2061d10a408d0220c2b0e7faefe52d9c41008", "tree": "e2b0ad1abb38cca9e0b9890836fc4290c28656b0", "parents": [ "aed8e1f9910b216ab3e14cb286c431c870f9b78f" ], "author": { "name": "Walter Goldens", "email": "goldenstranger@yahoo.com", "time": "Tue May 18 04:44:54 2010 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 02 16:13:18 2010 -0400" }, "message": "wireless: fix several minor description typos\n\nSigned-off-by: Walter Goldens \u003cgoldenstranger@yahoo.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f444de05d20e27cdd960c13fcbcfca3099f03143", "tree": "a7fbef60420d88dda5840e06094be21ee3eb1dc0", "parents": [ "ac8dd506e40ee2c7fcc61654a44c32555a0a8d6c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed May 05 15:25:02 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri May 07 14:55:50 2010 -0400" }, "message": "cfg80211/mac80211: better channel handling\n\nCurrently (all tested with hwsim) you can do stupid\nthings like setting up an AP on a certain channel,\nthen adding another virtual interface and making\nthat associate on another channel -- this will make\nthe beaconing to move channel but obviously without\nthe necessary IEs data update.\n\nIn order to improve this situation, first make the\nconfiguration APIs (cfg80211 and nl80211) aware of\nmulti-channel operation -- we\u0027ll eventually need\nthat in the future anyway. There\u0027s one userland API\nchange and one API addition. The API change is that\nnow SET_WIPHY must be called with virtual interface\nindex rather than only wiphy index in order to take\neffect for that interface -- luckily all current\nusers (hostapd) do that. For monitor interfaces, the\nold setting is preserved, but monitors are always\nslaved to other devices anyway so no guarantees.\n\nThe second userland API change is the introduction\nof a per virtual interface SET_CHANNEL command, that\nhostapd should use going forward to make it easier\nto understand what\u0027s going on (it can automatically\ndetect a kernel with this command).\n\nOther than mac80211, no existing cfg80211 drivers\nare affected by this change because they only allow\na single virtual interface.\n\nmac80211, however, now needs to be aware that the\nchannel settings are per interface now, and needs\nto disallow (for now) real multi-channel operation,\nwhich is another important part of this patch.\n\nOne of the immediate benefits is that you can now\nstart hostapd to operate on a hardware that already\nhas a connection on another virtual interface, as\nlong as you specify the same channel.\n\nNote that two things are left unhandled (this is an\nimprovement -- not a complete fix):\n\n * different HT/no-HT modes\n\n currently you could start an HT AP and then\n connect to a non-HT network on the same channel\n which would configure the hardware for no HT;\n that can be fixed fairly easily\n\n * CSA\n\n An AP we\u0027re connected to on a virtual interface\n might indicate switching channels, and in that\n case we would follow it, regardless of how many\n other interfaces are operating; this requires\n more effort to fix but is pretty rare after all\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fd8aaaf3519f3fd3c82594e90bc6808072b94d54", "tree": "70ebab87226b597270c1d33b57955afac3e2f4fe", "parents": [ "740c2679396d60763968ffd16362f1f5c8242172" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Tue Apr 27 01:23:35 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 27 16:09:21 2010 -0400" }, "message": "cfg80211: add ap isolation support\n\nThis is used to configure APs to not bridge traffic between connected stations.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d5cdfacb35ed886271d1ccfffbded98d3447da17", "tree": "8233a713949c4c8da8c98e75868efc74d5613c3d", "parents": [ "7590a550b88b8c3cb025f0a8ed58e279ad62e4c1" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Sun Apr 04 09:37:19 2010 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 07 14:37:56 2010 -0400" }, "message": "cfg80211: Add local-state-change-only auth/deauth/disassoc\n\ncfg80211 is quite strict on allowing authentication and association\ncommands only in certain states. In order to meet these requirements,\nuser space applications may need to clear authentication or\nassociation state in some cases. Currently, this can be done with\ndeauth/disassoc command, but that ends up sending out Deauthentication\nor Disassociation frame unnecessarily. Add a new nl80211 attribute to\nallow this sending of the frame be skipped, but with all other\ndeauth/disassoc operations being completed.\n\nSimilar state change is also needed for IEEE 802.11r FT protocol in\nthe FT-over-DS case which does not use Authentication frame exchange\nin a transition to another BSS. For this to work with cfg80211, an\nauthentication entry needs to be created for the target BSS without\nsending out an Authentication frame. The nl80211 authentication\ncommand can be used for this purpose, too, with the new attribute to\nindicate that the command is only for changing local state. This\nenables wpa_supplicant to complete FT-over-DS transition successfully.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4ac5541bdaea4d8e93710c58775cfa48ac82e09b", "tree": "21b794cc9995a32b517fd8e52ade6adc479146a4", "parents": [ "a97c13c34509be460dea23c86f31c02daa2428b5" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Wed Mar 24 10:11:14 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 24 16:04:33 2010 -0400" }, "message": "cfg80211: Improve connection quality maintenance docs in nl80211.h\n\nIn nl80211.h, be a little more elaborate in the docs for the definitions\nNL80211_ATTR_CQM_RSSI_THOLD and NL80211_ATTR_CQM_RSSI_HYST.\n\nReported-by: Luis R. Rodriguez \u003cmcgrof@gmail.com\u003e\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d6dc1a386358979e12366d1f35eeb68fc181e101", "tree": "4b65ba21328d6984d008b62795dd60d99c350632", "parents": [ "921ca03c8f8e982f27fc406bc301caf2196b99f7" ], "author": { "name": "Juuso Oikarinen", "email": "juuso.oikarinen@nokia.com", "time": "Tue Mar 23 09:02:33 2010 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Mar 24 16:02:37 2010 -0400" }, "message": "cfg80211: Add connection quality monitoring support to nl80211\n\nAdd support for basic configuration of a connection quality monitoring to the\nnl80211 interface, and basic support for notifying about triggered monitoring\nevents.\n\nVia this interface a user-space connection manager may configure and receive\npre-warning events of deteriorating WLAN connection quality, and start\npreparing for roaming in advance, before the connection is already lost.\n\nAn example usage of such a trigger is starting scanning for nearby AP\u0027s in\nan attempt to find one with better connection quality, and associate to it\nbefore the connection characteristics of the existing connection become too bad\nor the association is even lost, leading in a prolonged delay in connectivity.\n\nThe interface currently supports only RSSI, but it could be later extended\nto include other parameters, such as signal-to-noise ratio, if need for that\narises.\n\nSigned-off-by: Juuso Oikarinen \u003cjuuso.oikarinen@nokia.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "ffb9eb3d8b450c22bbbc688c6b630141ac476fd9" }