)]}' { "log": [ { "commit": "e0626e3844e8f430fc1a4417f523a00797df7ca6", "tree": "15e62abad725200b3c6ad2462f268c3df09ed711", "parents": [ "8cec03eee4a771f949c70cff07775c9bb21d4642" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Tue Sep 22 16:46:08 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:43 2009 -0700" }, "message": "spi: prefix modalias with \"spi:\"\n\nThis makes it consistent with other buses (platform, i2c, vio, ...). I\u0027m\nnot sure why we use the prefixes, but there must be a reason.\n\nThis was easy enough to do it, and I did it.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: David Woodhouse \u003cdwmw2@infradead.org\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Ben Dooks \u003cben-linux@fluff.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nCc: Samuel Ortiz \u003csameo@openedhand.com\u003e\nCc: \"John W. Linville\" \u003clinville@tuxdriver.com\u003e\nAcked-by: Mike Frysinger \u003cvapier.adi@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "8cec03eee4a771f949c70cff07775c9bb21d4642", "tree": "663493a95ca5cea6a3a4ca3a016ba02f00f42046", "parents": [ "d2a5c10f806b089a6e6f10deefd01dc4ce67940d" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Tue Sep 22 16:46:07 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:43 2009 -0700" }, "message": "hwmon: lm70: convert to device table matching\n\nMake the code a little bit nicer, and shorter.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: Kaiwan N Billimoria \u003ckaiwan@designergraphix.com\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: David Woodhouse \u003cdwmw2@infradead.org\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Ben Dooks \u003cben-linux@fluff.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "d2a5c10f806b089a6e6f10deefd01dc4ce67940d", "tree": "4d5057fc31ba051d0c8e2c2775c31cb0551e664a", "parents": [ "225d8b248843d1b3fbcf616d5e7d9544463aca3e" ], "author": { "name": "Anton Vorontsov", "email": "avorontsov@ru.mvista.com", "time": "Tue Sep 22 16:46:05 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:43 2009 -0700" }, "message": "hwmon: adxx: convert to device table matching\n\nMake the code a little bit nicer, and shorter.\n\nSigned-off-by: Anton Vorontsov \u003cavorontsov@ru.mvista.com\u003e\nCc: Marc Pignat \u003cmarc.pignat@hevs.ch\u003e\nCc: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: David Woodhouse \u003cdwmw2@infradead.org\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Ben Dooks \u003cben-linux@fluff.org\u003e\nCc: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nAcked-by: Marc Pignat \u003cmarc.pignat@hevs.ch\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "912e837aef72a3dd263dafc3717d92bbc1211a53", "tree": "7872171305a3518b6536754be0d597885e3d2792", "parents": [ "54fdade1c3332391948ec43530c02c4794a38172" ], "author": { "name": "Roel Kluin", "email": "roel.kluin@gmail.com", "time": "Tue Sep 22 16:43:41 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Sep 23 07:39:28 2009 -0700" }, "message": "dme1737: Keep index within pwm_config[]\n\nThe static code scanner \"Parfait\" reported this because pwm_config is\nonly 3 bytes - pwm_config[3] is out of range.\n\nSince this code path is never called with ix \u003d\u003d 3 (the device has no PWM4\noutput) this doesn\u0027t change anything in practice. But to encourage\ntesting with Parfait, lets make the warning go away...\n\nSigned-off-by: Roel Kluin \u003croel.kluin@gmail.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a976f150a6953da5ccbd40fa6dba3bd7d56f9f67", "tree": "36c0c1b9d424649421dde1f1d553bd17179a5264", "parents": [ "560a64a2b501add585b494b2b9cd9f68c0636b50" ], "author": { "name": "Henrik Rydberg", "email": "rydberg@euromail.se", "time": "Mon Sep 21 17:04:50 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:49 2009 -0700" }, "message": "hwmon: applesmc: restore accelerometer and keyboard backlight on resume\n\nOn resume from suspend, the driver currently resets the logical state as\nif it was brought up from halt. This patch uses the\ndev_pm_ops.resume/restore methods to synchronize the hardware with the\nmemorized logical state, in effect bringing back the accelerometer and\nbacklight to the state prior to suspend. Works for both suspend to ram\nand hibernation. The patch has zero effect on the running state.\n\nSigned-off-by: Henrik Rydberg \u003crydberg@euromail.se\u003e\nCc: Nicolas Boichat \u003cnicolas@boichat.ch\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "560a64a2b501add585b494b2b9cd9f68c0636b50", "tree": "76ff9e60110a388e551f17b2071405eeea5f1c71", "parents": [ "905ffdc35e50844ab45bbc59d5302238844f8526" ], "author": { "name": "Roel Kluin", "email": "roel.kluin@gmail.com", "time": "Mon Sep 21 17:04:48 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:49 2009 -0700" }, "message": "hwmon: fix freeing of gpio_data and irq\n\nIf already requested, gpio_data and irq should be freed in the case of an\nerror.\n\nSigned-off-by: Roel Kluin \u003croel.kluin@gmail.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "905ffdc35e50844ab45bbc59d5302238844f8526", "tree": "13f5fcb88fe9b8f049181234749ea715b509e34b", "parents": [ "f266889517252bc697e7103bcd6ed46bdf2c1579" ], "author": { "name": "Michael Abbott", "email": "michael@araneidae.co.uk", "time": "Mon Sep 21 17:04:47 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:49 2009 -0700" }, "message": "drivers/hwmon/adm1021.c: add low_power support for adm1021 driver\n\nOccasionally it is helpful to be able to turn a temperature sensor off\n(for example if it\u0027s making unwanted electrical noise). This patch\nadds a sysfs node to put any adm1021 compatible device into low power mode.\n\nSigned-off-by: Michael Abbott \u003cmichael.abbott@diamond.ac.uk\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "f266889517252bc697e7103bcd6ed46bdf2c1579", "tree": "008a9f272f14e1f3b8e6009dc2509d274cf3155a", "parents": [ "dc791f8aeeeea4314beede83d6ee74e6af5f627b" ], "author": { "name": "Michael Abbott", "email": "michael@araneidae.co.uk", "time": "Mon Sep 21 17:04:46 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:49 2009 -0700" }, "message": "drivers/hwmon/adm1021.c: support high precision ADM1023 remote sensor\n\nThe ADM1023 temperature sensor supports higher resolution for its external\nsensor (sensitivity of 1/8 deg C). This patch makes this higher\nresolution available through the appropriate temperature sysfs nodes.\n\nCuriously, this functionality was available in the 2.4 kernel driver (but\nformatted in a less helpful manner).\n\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Michael Abbott \u003cmichael.abbott@diamond.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "dc791f8aeeeea4314beede83d6ee74e6af5f627b", "tree": "15dff38707ba1991a0e822e43ec15a3923c13fef", "parents": [ "2cd9645e2f0d60ed12268fe1738e79c119e2fe5a" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Mon Sep 21 17:04:45 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:49 2009 -0700" }, "message": "lis3_spi: code cleanups\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2cd9645e2f0d60ed12268fe1738e79c119e2fe5a", "tree": "91e335cd90f62f1de5acbd1c220f80cad50227db", "parents": [ "8873c33483e62988ed886230aab71ef4c678f710" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Mon Sep 21 17:04:44 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:49 2009 -0700" }, "message": "lis3: add power management functions\n\nThis enabled power management functions for the SPI transport layer of the\nlis3 devices. The device\u0027s suspend mode is only entered in case no wakeup\nthreshold has been given. In this case, the device is supposed to wake up\nthe system and must thus not be put to deep sleep.\n\n[randy.dunlap@oracle.com: fix lis3-spi for CONFIG_PM\u003dn]\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "8873c33483e62988ed886230aab71ef4c678f710", "tree": "441cdc48497b84c823330241ecff147642e136a4", "parents": [ "0ec48915e8bbb37dea3df85c41e4c3498b95664b" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Mon Sep 21 17:04:43 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:48 2009 -0700" }, "message": "lis3: add free-fall/wakeup function via platform_data\n\nThis offers a way for platforms to define flags and thresholds for the\nfree-fall/wakeup functions of the lis302d chips.\n\nMore registers needed to be seperated as they are specific to the\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0bf41d9f414a5cf558aff234a0ff486257537574", "tree": "0ee03f5c5d245f7abedd9be49cef04a9e9d5bd25", "parents": [ "42e41c54d61e32e8a349943607daa53205324d7f" ], "author": { "name": "Michael Riepe", "email": "michael.riepe@googlemail.com", "time": "Mon Sep 21 17:04:41 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Sep 22 07:17:48 2009 -0700" }, "message": "drivers/hwmon/coretemp.c: enable the Intel Atom\n\nEnable the coretemp driver on an Intel Atom.\n\nI\u0027m not sure if the readings are correct, however - on my 330, the driver\nreports values between 27 and 41 °C (with core1 being about 8°C hotter\nthan core0, given the same load). Maybe the maximum temperature of 100 °C\nis wrong for Atom CPUs.\n\nCc: Arjan van de Ven \u003carjan@infradead.org\u003e\nCc: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6f130478e24d810078c3f0ee292bcc4ec034dcce", "tree": "1c782ccceaf998e9e23862094588c125ee6f38af", "parents": [ "6f128fa344833bf8bf076a51d14401661c146470", "75f2ba8f0006440e720e47ae14c917e07c452d72" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Sep 18 09:22:36 2009 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)\n regulator: Voltage count for AB3100\n mfd: Convert WM8350 to use request_threaded_irq()\n mfd: Update MAINTAINERS patterns for WM831x\n mfd: Fix twl4030-power warnings\n regulator: AB3100 support\n rtc: AB3100 RTC support\n mfd: Fix ab3100-otp build failure\n mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board\n mfd: Print warning for twl4030 out-of-order script loading\n mfd: Add support for TWL4030/5030 dynamic power switching\n mfd: AB3100 OTP readout\n regulator: Add Freescale MC13783 driver\n mfd: Add Freescale MC13783 driver\n mfd: AB3100 disable irq nosync\n mfd: AB3100 alter default setting\n mfd: AB3100 propagate error\n mfd: AB3100 accessor function cleanups\n rtc: Add support for RTCs on Wolfson WM831x devices\n regulator: get pcap data from the parent device\n input: PCAP2 misc input driver\n ...\n" }, { "commit": "08bad5a821371548942aa13565831f18fe1875f3", "tree": "9b689f0bc2ab63700909b9b3af19cee0c7aa1dbd", "parents": [ "e4b736f18f338daae141325c818187c4ab3e244c" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Tue Jul 28 15:52:22 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:47:02 2009 +0200" }, "message": "hwmon: WM831x PMIC hardware monitoring driver\n\nThis driver adds support for the hardware monitoring features of\nthe WM831x PMICs to the hwmon API. Monitoring is provided for\nthe system voltages supported natively by the WM831x, the chip\ntemperature, the battery temperature and the auxiliary inputs\nof the WM831x.\n\nCurrently no alarms are supported, though digital comparators on\nthe WM831x devices would allow these to be provided.\n\nSince the auxiliary and battery temperature input scaling depends\non the system configuration the value is reported as a voltage to\nuserspace.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "fb6c023a2b845df1ec383b74644ac35a4bbb76b6", "tree": "dbb8acdaa37c8ce80ee702a55f672476b6e45444", "parents": [ "39b1772a24126d74699cea623f96b50ca6b6f08f" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Jul 20 12:43:45 2009 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Sep 17 09:46:51 2009 +0200" }, "message": "hwmon: Add WM835x PMIC hardware monitoring driver\n\nThis driver provides reporting of the status supply voltage rails\nof the WM835x series of PMICs via the hwmon API.\n\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "5cfaf338134605ce8d9272b9c16605bc920d25be", "tree": "405140965ec9aec82cb5f180afa6aefdc4413632", "parents": [ "afc31875fa5774dbc117f8c62034d77390156edc" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:14 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:14 2009 +0200" }, "message": "hwmon: (lm85) Don\u0027t bind to Winbond/Nuvoton WPCD377I\n\nThe Winbond/Nuvoton WPCD377I is the reduced version of a Super-I/O\nwhich emulates the National Semiconductor LM96000 hardware monitoring\nchips, but without the hardware monitoring part. Instead of plain\ndisabling the emulation, the vendor left the emulated chip visible,\nbut all monitored values are always zero. This is rather confusing for\nthe users. So detect this case and refuse to bind to such fake chips.\n\nThis fixes lm-sensors ticket #2182:\nhttp://www.lm-sensors.org/ticket/2182\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "61cba5c244bd52e91c01e9f79abba30e54f68dd8", "tree": "d48447931151df466aaf8ddb71de485711bea581", "parents": [ "86855b0c1fd75338c67cabbf85d64d033612c47b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "message": "hwmon: Clearly mark ACPI drivers as such\n\nNow that we have ACPI-based hardware monitoring drivers, and we will\nstart telling users to use them instead of native drivers when I/O\nresources conflict, I think it would be good to clearly mark ACPI\ndrivers as such in Kconfig.\n\nAlso, in the case of monolithic kernels, I think the ACPI drivers\nshould take precedence over native drivers, so they should be listed\nfirst in Makefile.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Luca Tettamanti \u003ckronos.it@gmail.com\u003e\n" }, { "commit": "86855b0c1fd75338c67cabbf85d64d033612c47b", "tree": "69b20b9059bc9d317fcb68a77ce988acce8577ef", "parents": [ "6055fae8aceee41471edfd1876e5617d16e028fe" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "message": "hwmon: Use resource_size\n\nUse the function resource_size, which reduces the chance of introducing\noff-by-one errors in calculating the resource size.\n\nThe semantic patch that makes this change is as follows:\n(http://www.emn.fr/x-info/coccinelle/)\n\n// \u003csmpl\u003e\n@@\nstruct resource *res;\n@@\n\n- (res-\u003eend - res-\u003estart) + 1\n+ resource_size(res)\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "6055fae8aceee41471edfd1876e5617d16e028fe", "tree": "5579918819802d746c6854c183b3ed8cdc7c5613", "parents": [ "1915fb70fa23230894cd35d98fcac5a168ec5c23" ], "author": { "name": "H Hartley Sweeten", "email": "hartleys@visionengravers.com", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:13 2009 +0200" }, "message": "hwmon: Include \u003clinux/io.h\u003e instead of \u003casm/io.h\u003e\n\nDrivers should be including \u003clinux/io.h\u003e instead of \u003casm/io.h\u003e.\n\nSigned-off-by: H Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nCc: Alistair John Strachan \u003calistair@devzero.co.uk\u003e\nCc: Nicolas Boichat \u003cnicolas@boichat.ch\u003e\nCc: Juerg Haefliger \u003cjuergh@gmail.com\u003e\nCc: Frank Seidel \u003cfrank@f-seidel.de\u003e\nAcked-by: Jim Cromie \u003cjim.cromie@gmail.com\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nCc: Roger Lucas \u003cvt8231@hiddenengine.co.uk\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "9410700b881f867a50dd8dc3204372fd9dccd8f8", "tree": "d41a31183e3716bb2ac8e548843653bbcf54105d", "parents": [ "5bed13f5809927be10facccb63add834b712df51" ], "author": { "name": "Andre Prendel", "email": "andre.prendel@gmx.de", "time": "Tue Sep 15 17:18:11 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:11 2009 +0200" }, "message": "hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips\n\nAdd support for Texas Instruments TMP421/422/423 temperature sensor IC.\n\nTI\u0027s TMP421/422/423 are I2C temperature sensor chips. These chips are\nsimilar to TI\u0027s TMP401/411 chips, but with reduced functionality (only\ntemperature measurement). The chips have one local sensor and up to\nthree (TMP423) remote sensors.\n\nSigned-off-by: Andre Prendel \u003candre.prendel@gmx.de\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "5bed13f5809927be10facccb63add834b712df51", "tree": "4fc42bd46e8e3630d61314f069adbbaa650f3549", "parents": [ "2c2a6172afab7421f6af7e228cd3121f423ea932" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:11 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:11 2009 +0200" }, "message": "hwmon-vid: Ignore 6th VID pin of AMD family 0Fh processors\n\nWe had a report about a mainboard for AMD family 0Fh processors not\nrouting the 6th VID pin from the CPU to the hardware monitoring chip.\n\nWhile the vendor should have wired the pin (or, failing that, should\nhave hardwired it to level high rather than low), the fact is that\nnone of these processors are currently known to operate at the lower\nvoltage levels which require the 6th VID pin. So, as a practical\nworkaround, I propose to ignore the 6th VID pin for these CPUs.\n\nIf this decision ever causes problems, we\u0027ll reconsider.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Frank Myhr \u003cfmyhr@fhmtech.com\u003e\nTested-by: Hleb Valoshka \u003c375gnu@gmail.com\u003e\nCc: Rudolf Marek \u003cr.marek@assembler.cz\u003e\nCc: Andreas Herrmann \u003candreas.herrmann3@amd.com\u003e\n" }, { "commit": "bbe5939ab1834f79f177739cb84904bc12d08073", "tree": "ca90a7d9b19f76602de5821493786b780f1b5793", "parents": [ "18240904960a39e582ced8ba8ececb10b8c22dd3" ], "author": { "name": "Alistair John Strachan", "email": "alistair@devzero.co.uk", "time": "Tue Sep 15 17:18:10 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Sep 15 17:18:10 2009 +0200" }, "message": "hwmon: (abituguru3) Support multiple DMI strings per chip ID\n\nMost known Abit motherboards have unique uguru chip IDs. However,\nsome \"refresh\" boards keep the same chip ID but have a different\nDMI string. As our DMI board string matching is (necessarily)\nstrict, some boards were failing DMI detection, and as the old\nprobe method was also failing, the driver would not load.\n\nThe only known boards affected by this problem are the IP35 Pro XE\n(vs IP35 Pro) and the AB9 Pro (vs AB9). Is it not sufficient to\nrelax the match criteria, as some boards (e.g. the AB9 Quad GT)\nhave different uguru chip IDs.\n\nThis patch replaces the dmi_name string with a NULL terminated\narray of strings to be matched per uguru chip ID. It has been\ncompile and runtime tested (thanks Rune).\n\nReferences: https://bugs.launchpad.net/bugs/298798\n\nSigned-off-by: Alistair John Strachan \u003calistair@devzero.co.uk\u003e\nTested-by: Rune Svendsen \u003crunesvend@gmail.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "63c949ea1dcf5d46789f13d8e9c21bb8aeb605cb", "tree": "ca8e063aed16c0a5e5f51557861dbbad77da8bbb", "parents": [ "9b71de49b030ad8fd4d13d38571b5c42dc9ed8dd", "bff78650a2b0ed42b8fb134b6a9b387e00027d67" ], "author": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Fri Aug 14 15:23:15 2009 +0100" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Fri Aug 14 15:23:15 2009 +0100" }, "message": "Merge branch \u0027next-s3c-hwmon\u0027 into next-s3c\n" }, { "commit": "8d282497cbf8124d6814d51a74fb13d69531c669", "tree": "82680b36cbe2f599069d4effa4d941648d0c4c51", "parents": [ "1b54ab450b180eaeeb0eee6f0f64349246a22c14" ], "author": { "name": "Luca Tettamanti", "email": "kronos.it@gmail.com", "time": "Tue Jul 28 16:31:39 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Jul 28 16:31:39 2009 +0200" }, "message": "hwmon: (asus_atk0110) Fix upper limit readings\n\nOn newer Asus boards the \"upper\" limit of a sensor is encoded as\ndelta from the \"lower\" limit. Fix the driver to correctly handle\nthis case.\n\nSigned-off-by: Luca Tettamanti \u003ckronos.it@gmail.com\u003e\nTested-by: Alex Macfarlane Smith \u003cnospam@archifishal.co.uk\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1b54ab450b180eaeeb0eee6f0f64349246a22c14", "tree": "eb32e1dc8215af14b05500463c8d4c18186277cf", "parents": [ "4733fd328f14280900435d9dbae1487d110a4d56" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Jul 28 16:31:39 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Jul 28 16:31:39 2009 +0200" }, "message": "hwmon: (smsc47m1) Differentiate between LPC47M233 and LPC47M292\n\nThe SMSC LPC47M233 and LPC47M292 chips have the same device ID but\nare not compatible.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Juerg Haefliger \u003cjuergh@gmail.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\n" }, { "commit": "bff78650a2b0ed42b8fb134b6a9b387e00027d67", "tree": "63eb51aafad3f5f8039d9c8a9847c599e7ff95d8", "parents": [ "e170adcb406504b8acd35554c69830c11916be1f" ], "author": { "name": "Ben Dooks", "email": "ben@simtec.co.uk", "time": "Sat Jul 18 10:12:28 2009 +0100" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Sat Jul 18 10:15:54 2009 +0100" }, "message": "ARM: HWMON: S3C24XX series ADC driver\n\nAdd support for the ADC controller on the S3C series of processors to\ndrivers/hwmon for use with hardware monitoring systems.\n\nSigned-off-by: Ben Dooks \u003cben@simtec.co.uk\u003e\nAcked-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "ec05a8d75d0777cd221f61a88437a31e4cfb83d8", "tree": "741dfd2a8960b141a469bdf3ae5557b73ecc602a", "parents": [ "24205e0850dd8a79c597e366daafdd5f31a24656" ], "author": { "name": "Alistair John Strachan", "email": "alistair@devzero.co.uk", "time": "Sat Jul 11 13:42:38 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Jul 11 13:42:38 2009 +0200" }, "message": "hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT\n\nSwitch the AB9, AB9 QuadQT and IX38 QuadGT over from port\nprobing to the preferred DMI probe method.\n\nSigned-off-by: Alistair John Strachan \u003calistair@devzero.co.uk\u003e\nTested-by: dan \u003cdan@deeog.com\u003e\nTested-by: Nygel Lyndley \u003cnygel.lyndley@gmail.com\u003e\nTested-by: Dmitriy Fedchenko \u003cdmitriy-fedc@yandex.ru\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "24205e0850dd8a79c597e366daafdd5f31a24656", "tree": "10401eee6d57e1ee3917bd811e3a4b61eaa30e51", "parents": [ "025dc740d01f99ccba945df1f9ef9e06b1c15d96" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Sat Jul 11 13:42:37 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Jul 11 13:42:37 2009 +0200" }, "message": "hwmon: (sht15) Remove unnecessary semicolon\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "025dc740d01f99ccba945df1f9ef9e06b1c15d96", "tree": "36f965fa0b2cce8c77f980d7f6e902acecd0d309", "parents": [ "f00caa76297a534e30c3ec85382fbc3fd0dcbc69" ], "author": { "name": "Jiri Slaby", "email": "jirislaby@gmail.com", "time": "Sat Jul 11 13:42:37 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Jul 11 13:42:37 2009 +0200" }, "message": "hwmon: (max6650) Fix lock imbalance\n\nAdd omitted update_lock to one switch/case in set_div.\n\nSigned-off-by: Jiri Slaby \u003cjirislaby@gmail.com\u003e\nAcked-by: Hans J. Koch \u003chjk@linutronix.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "517d08699b250021303f9a7cf0d758b6dc0748ed", "tree": "5e5b0134c3fffb78fe9d8b1641a64ff28fdd7bbc", "parents": [ "8eeee4e2f04fc551f50c9d9847da2d73d7d33728", "a34601c5d84134055782ee031d58d82f5440e918" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:50:13 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:50:13 2009 -0700" }, "message": "Merge branch \u0027akpm\u0027\n\n* akpm: (182 commits)\n fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset\n fbdev: *bfin*: fix __dev{init,exit} markings\n fbdev: *bfin*: drop unnecessary calls to memset\n fbdev: bfin-t350mcqb-fb: drop unused local variables\n fbdev: blackfin has __raw I/O accessors, so use them in fb.h\n fbdev: s1d13xxxfb: add accelerated bitblt functions\n tcx: use standard fields for framebuffer physical address and length\n fbdev: add support for handoff from firmware to hw framebuffers\n intelfb: fix a bug when changing video timing\n fbdev: use framebuffer_release() for freeing fb_info structures\n radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?\n s3c-fb: CPUFREQ frequency scaling support\n s3c-fb: fix resource releasing on error during probing\n carminefb: fix possible access beyond end of carmine_modedb[]\n acornfb: remove fb_mmap function\n mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF\n mb862xxfb: restrict compliation of platform driver to PPC\n Samsung SoC Framebuffer driver: add Alpha Channel support\n atmel-lcdc: fix pixclock upper bound detection\n offb: use framebuffer_alloc() to allocate fb_info struct\n ...\n\nManually fix up conflicts due to kmemcheck in mm/slab.c\n" }, { "commit": "8f3128e714ded7cf1e8c786c204a4f253b5d8ff4", "tree": "cb3c1e9df2da5e4817acfeb75284e8d7b92eae33", "parents": [ "0093716e6dd18dad554bef81cc788a4c50d32a09" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Tue Jun 16 15:34:17 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:47:57 2009 -0700" }, "message": "lis3: add click function\n\nThe LIS302DL accelerometer chip has a \u0027click\u0027 feature which can be used to\ndetect sudden motion on any of the three axis. Configuration data is\npassed via spi platform_data and no action is taken if that\u0027s not\nspecified, so it won\u0027t harm any existing platform.\n\nTo make the configuration effective, the IRQ lines need to be set up\nappropriately. This patch also adds a way to do that from board support\ncode.\n\nThe DD_* definitions were factored out to an own enum because they are\nspecific to LIS3LV02D devices.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nAcked-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "0093716e6dd18dad554bef81cc788a4c50d32a09", "tree": "5e0005104794b8e40cb287eec722e6c70ab87e1c", "parents": [ "dc6ea97bac6b8228c7a69740df35eed2be3407be" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Tue Jun 16 15:34:16 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:47:57 2009 -0700" }, "message": "lis3: add three new laptop models\n\nSeparate the 6710 and 6715, and set the right axis information for the\n6715.\nReported-by: Isaac702 \u003cisaac702@gmail.com\u003e\n\nAdd the 6930.\nReported-by: Christian Weidle \u003cslateroni@gmail.com\u003e\n\nAdd the 2710.\nReported-by: Pavel Herrmann \u003cmorpheus.ibis@gmail.com\u003e\n\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "dc6ea97bac6b8228c7a69740df35eed2be3407be", "tree": "68c14ab8e8c0c245f61d74671f2036386a0ef6ec", "parents": [ "a002ee896dfd08ce9fba44e9ae513c9094699a27" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Tue Jun 16 15:34:15 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:47:57 2009 -0700" }, "message": "lis3: use input_polled_device\n\nNow that there is no need to hookup on the open/close of the joystick,\nit\u0027s possible to use the simplified interface input_polled_device, instead\nof creating our own kthread.\n\n[randy.dunlap@oracle.com: fix Kconfig]\n[randy.dunlap@oracle.com: fix Kconfig some more]\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a002ee896dfd08ce9fba44e9ae513c9094699a27", "tree": "3a66ea80ad5523359e3f3f34be39d902d84706bb", "parents": [ "c28842421cb6a29fd952043381bc5391bdf6be50" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Tue Jun 16 15:34:14 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:47:57 2009 -0700" }, "message": "lis3: remove automatic shutdown of the device\n\nAfter measurement on my laptop, it seems that turning off the device does\nnot bring any energy saving (within 0.1W precision). So let\u0027s keep the\ndevice always on. It simplifies the code, and it avoids the problem of\nreading a wrong value sometimes just after turning the device on.\n\nMoreover, since commit ef2cfc790bf5f0ff189b01eabc0f4feb5e8524df had been\ntoo zealous, the device was actually never turned off anyway. This patch\nalso restores the damages done by this commit concerning the\ninitialisation/poweroff.\n\nAlso do more clean up with the usage of the lis3_dev global variable.\n\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c28842421cb6a29fd952043381bc5391bdf6be50", "tree": "5d906c515d8374c61da58b1ccdc4d8125a5546fa", "parents": [ "4b324126e0c6c3a5080ca3ec0981e8766ed6f1ee" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Tue Jun 16 15:34:13 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jun 16 19:47:56 2009 -0700" }, "message": "lis3: fix misc device unregistering and printk\n\nCan only unregister the misc device if it was registered before. Also\nremove debugging messages, which in addition were not properly formated.\n\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "52b5226f481c09cc499cc28b1e9347d314b340f1", "tree": "96cd3e3cdc6fc8128aaad252807abf86aaf7b368", "parents": [ "09475d32e652fe60901fe8c9cd50f3f6db0c4933" ], "author": { "name": "Christian Engelmayer", "email": "christian.engelmayer@frequentis.com", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "message": "hwmon: (max6650) Add support for alarms\n\nExport the alarm flags provided by the MAX6650/MAX6651 fan-speed regulator\nand monitor chips via sysfs.\n\nSigned-off-by: Christian Engelmayer \u003cchristian.engelmayer@frequentis.com\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "09475d32e652fe60901fe8c9cd50f3f6db0c4933", "tree": "895d7f0d2195e6e6902b6fc8f56cdc4228f0913f", "parents": [ "b6858bca8d7bf52e2564cba5a5ed87e1019d3fd9" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:52 2009 +0200" }, "message": "hwmon: (f71882fg) Add support for the F71858F\n\nAdd support for the hwmon part of the Fintek F71858FG superio IC to the\nf71882fg driver. Many thanks to Jelle de Jong for lending me a motherboard \nwith this superio on it.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "b6858bca8d7bf52e2564cba5a5ed87e1019d3fd9", "tree": "4f24cb85d2e52a82e12ccddb5789810a42c4ecfc", "parents": [ "996cadb2bf3787adcf4e164e1b351966c9e787f6" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:51 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:51 2009 +0200" }, "message": "hwmon: (f71882fg) Add temp#_fault sysfs attr for f8000\n\nWhile working on f71852fg support I noticed that the f8000 sysfs attr\ntable was missing entries for temp#_fault, which the f8000 does have and\nwhich we were already reading.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "996cadb2bf3787adcf4e164e1b351966c9e787f6", "tree": "ee8fb6f578d80bf85f6dfd05459a5bdd88c8a6e5", "parents": [ "3fc7838a20cdd9aab0077f355b8c44135cd4b6bd" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:51 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:51 2009 +0200" }, "message": "hwmon: (f71882fg) Sanity check f8000 pwm settings\n\nWe depend up on the pwm_enable register (0x96) not containing any reserved\nsettings in various places. We were already checking to make sure there\nwere no reserved settings in the register for the f71862fg, this patch adds\nthe same checking for the f8000, while at it it also moves the code to\na more apropriate place so we don\u0027t need to check if the fan/pwm part\nof the IC is enabled twice.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3fc7838a20cdd9aab0077f355b8c44135cd4b6bd", "tree": "8437fbfd39f0d210286988e104d3228af77d1e5f", "parents": [ "2958b1ec6be1d71105d67d70de9d7d70f5e97151" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "message": "hwmon: (f71882fg) Cleanup f8000 pwm handling\n\nCurrently we are using separate per model sysfs attr for the 3th pwm, because\nthe 3th pwm of the f8000 only has automatic mode and not manual mode. Doing\nthings this way was getting in the way for adding f71858fg support, so this\npatch makes the pwm attr identical for all models, and instead adds a check\nto store_pwm_enable() disallowing setting the 3th pwm to manual mode\non a f8000 IC.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "2958b1ec6be1d71105d67d70de9d7d70f5e97151", "tree": "cf4c9b80aea488135435bef72de68b940efe7849", "parents": [ "c1e48dce05ff06266cdfd0cba55fc5367cd499a5" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "message": "hwmon: PCI quirk for hwmon access on MSI MS-7031 board\n\nThe MSI MS-7031 is based on an ATI IXP300 south bridge. On this south\nbridge, accessible I/O ports must be enabled explicitly. Unfortunately\nthe BIOS forgets to enable access to the hardware monitoring chip I/O\nports, so hardware monitoring fails.\n\nAdd a quirk enabling access to the required ports (0x295-0x296). This\nis exactly what MSI\u0027s own hardware monitoring application is doing, so\nit has to be the right way.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c1e48dce05ff06266cdfd0cba55fc5367cd499a5", "tree": "c46ba5f97e6079bc9c897b50a40e640f88951386", "parents": [ "cd4e96c5dd4a72bdc54ea9981e02465708c204d3" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:50 2009 +0200" }, "message": "hwmon: (w83627ehf) Add W83627DHG-P support\n\nAdd support for the new incarnation of the Winbond/Nuvoton W83627DHG\nchip known as W83627DHG-P. It is basically the same as the original\nW83627DHG with an additional automatic can speed control mode (not\nsupported by the driver yet.)\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Madhu \u003cmadhu.chinakonda@gmail.com\u003e\n" }, { "commit": "fce0758f5990b34af4ffba589b23f25c700beb2f", "tree": "bff545efd04dcaf050a9c7744758b30108007815", "parents": [ "ab2b79d5e22d3cdd2b191e479c60e69df528369a" ], "author": { "name": "Andre Prendel", "email": "andre.prendel@gmx.de", "time": "Mon Jun 15 18:39:47 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:47 2009 +0200" }, "message": "hwmon: (tmp401) Add support for TI\u0027s TMP411 sensors chip\n\nThis adds support for TI\u0027s TMP411 sensor chip.\n\nPreliminary support were done by Gabriel Konat, Sander Leget and\nWouter Willems. The chip is compatible with TI\u0027s TMP401 sensor\nchip. It has additional support for historical minimun/maximum\nmeasurements.\n\nSigned-off-by: Andre Prendel \u003candre.prendel@gmx.de\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "ab2b79d5e22d3cdd2b191e479c60e69df528369a", "tree": "cb7ed54072090347e455373e8174613e9a32b85f", "parents": [ "8070408b5446232ba6eb6e0809a329da58a6ae52" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "message": "hwmon: (tmp401) Add support for TI\u0027s TMP401 sensor chip\n\nThis is a new hwmon driver for TI\u0027s TMP401 temperature sensor IC. This driver\nwas written on behalf of an embedded systems vendor under the\nLinux driver project.\n\nIt has been tested using a TI TMP401 sample attached to a i2c-tiny-usb adapter.\nWhich was provided by Till Harbaum, many thanks to him for this!\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "8070408b5446232ba6eb6e0809a329da58a6ae52", "tree": "1d50a3a6df79cff77abb390ac5611a093bc4ac17", "parents": [ "cd659fd0d7c91b7830d1fea0c76a640e171d2d43" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:46 2009 +0200" }, "message": "hwmon: (ibmaem) Automatically load on HC10 blade\n\nEnable auto-probing for the HC10 blade and amend the supported system\nlist.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "cd659fd0d7c91b7830d1fea0c76a640e171d2d43", "tree": "af28cde84cde08e83e37978e6986693b1d810b66", "parents": [ "45e3e1935e2857c54783291107d33323b3ef33c8" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:45 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 15 18:39:45 2009 +0200" }, "message": "hwmon: Fix more __devexit_p glitches\n\nMake sure __devexit and devexit_p() match in all hwmon drivers.\nSuggested by a similar fix from Mike Frysinger.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\n" }, { "commit": "39d8bbedb9571a89d638f5b05358f26ab503d7a6", "tree": "9868e75fa933a384d90e80c26ee369a6cf2cc8ad", "parents": [ "3218911f839b6c85acbf872ad264ea69aa4d89ad" ], "author": { "name": "Mike Frysinger", "email": "vapier@gentoo.org", "time": "Mon Jun 01 13:46:49 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Jun 01 13:46:49 2009 +0200" }, "message": "hwmon: (lm78) Add missing __devexit_p()\n\nThe remove function uses __devexit, so the .remove assignment needs\n__devexit_p() to fix a build error with hotplug disabled.\n\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "848ddf116b3d1711c956fac8627be12dfe8d736f", "tree": "59b9f5dcd4b652e127f0908ab162536d588ad0fc", "parents": [ "b9008708f24de8fb9bdbfb5d3b27e36d5a357eda" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri May 08 20:27:28 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri May 08 20:27:28 2009 +0200" }, "message": "hwmon: (w83781d) Fix W83782D support (NULL pointer dereference)\n\nCommit 360782dde00a2e6e7d9fd57535f90934707ab8a8 (hwmon: (w83781d) Stop\nabusing struct i2c_client for ISA devices) broke W83782D support for\ndevices connected on the ISA bus. You will hit a NULL pointer\ndereference as soon as you read any device attribute. Other devices,\nand W83782D devices on the SMBus, aren\u0027t affected.\n\nReported-by: Michel Abraham\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nTested-by: Michel Abraham\n" }, { "commit": "b9008708f24de8fb9bdbfb5d3b27e36d5a357eda", "tree": "0a5629d5da51ccf8d569e130cfa40216630ce471", "parents": [ "8c9ed899b44c19e81859fbb0e9d659fe2f8630fc" ], "author": { "name": "Luca Tettamanti", "email": "kronos.it@gmail.com", "time": "Fri May 08 20:27:28 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri May 08 20:27:28 2009 +0200" }, "message": "hwmon: (asus_atk0110) Fix compiler warning\n\natk_sensor_type is only used when DEBUG is defined.\n\nSigned-off-by: Luca Tettamanti \u003ckronos.it@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "251eb40f5ccd07a905633a816fbf8f2b6b25cced", "tree": "6e5c1579acbdfb240745e4b9b3f6e999681ce4d8", "parents": [ "133bb070e94ab41d750c6f2160c8843e46f11b78" ], "author": { "name": "Jonathan Cameron", "email": "jic23@cam.ac.uk", "time": "Mon Apr 13 14:39:45 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 13 15:04:29 2009 -0700" }, "message": "hwmon: sht15 humidity sensor driver\n\nData sheet at:\nhttp://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf\n\nThese sensors communicate over a 2 wire bus running a device specific\nprotocol. The complexity of the driver is mainly due to handling the\nsubstantial delays between requesting a reading and the device pulling the\ndata line low to indicate that the data is available. This is handled by\nan interrupt that is disabled under all other conditions.\n\nI wasn\u0027t terribly clear on the best way to handle this, so comments on\nthat aspect would be particularly welcome!\n\nInterpretation of the temperature depends on knowing the supply voltage.\nIf configured in a board config as a regulator consumer this is obtained\nfrom the regulator subsystem. If not it should be provided in the\nplatform data.\n\nI\u0027ve placed this driver in the hwmon subsystem as it is definitely a\ndevice that may be used for hardware monitoring and with it\u0027s relatively\nslow response times (up to 120 millisecs to get a reading) a caching\nstrategy certainly seems to make sense!\n\nSigned-off-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2f6f6c6b5c4774cfdbe759eea1f5203a4b26fe6f", "tree": "7cca33cda3f29c2d6cd3b1a4b996924fb1ac9985", "parents": [ "ca8b9950298c84ca528a5943409a727c04ec88f8" ], "author": { "name": "Huang Weiyi", "email": "weiyi.huang@gmail.com", "time": "Mon Apr 13 14:39:37 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 13 15:04:28 2009 -0700" }, "message": "hp_accel: remove unused #include \u003cversion.h\u003e\n\nRemove unused #include \u003cversion.h\u003e in drivers/hwmon/hp_accel.c.\n\nSigned-off-by: Huang Weiyi \u003cweiyi.huang@gmail.com\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "10a0d912898ac2fe49094acf2c1339d0fb4c2bc6", "tree": "ca87b31c5b958599b313e40cc141748664687c51", "parents": [ "51dcdfec6a274afc1c6fce180d582add9ff512c0", "2c03d07ad54db03b813bb98c469790c07ca9f5dd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 07 08:44:43 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 07 08:44:43 2009 -0700" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6\n\n* \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6:\n hwmon: Add Asus ATK0110 support\n hwmon: (lm95241) Convert to new-style i2c driver\n" }, { "commit": "3bcfa9e47a7d1be6faef3be6c4b2049e585e2f38", "tree": "7cc0896fb4ee501fb08560adc1747b7e5a7544cf", "parents": [ "6260a4b0521a41189b2c2a8119096c1e21dbdf2c" ], "author": { "name": "Herbert Valerio Riedel", "email": "hvr@gnu.org", "time": "Mon Apr 06 19:00:30 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Apr 07 08:31:03 2009 -0700" }, "message": "hwmon: add support for GMT G760A fan speed PWM controller\n\nThis controller can be found on the D-Link DNS-323 for instance, where\nit is to be configured via static i2c_board_info in the board-specific\nmach-orion/dns323-setup.c; this driver supports only the new-style\ndriver model.\n\nTested-by: Martin Michlmayr \u003ctbm@cyrius.com\u003e\nSigned-off-by: Herbert Valerio Riedel \u003chvr@gnu.org\u003e\nSigned-off-by: Matthew Palmer \u003cmpalmer@debian.org\u003e\nSigned-off-by: Laurie Bradshaw \u003cbradshaw.laurie@googlemail.com\u003e\nSigned-off-by: Martin Michlmayr \u003ctbm@cyrius.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "2c03d07ad54db03b813bb98c469790c07ca9f5dd", "tree": "3ca6b4c0f3ea3d20cb9acc410c2e822846d0d590", "parents": [ "797eaa4b0242a41cb6bc913890b9ec22ec8788ed" ], "author": { "name": "Luca Tettamanti", "email": "kronos.it@gmail.com", "time": "Tue Apr 07 15:32:59 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Apr 07 15:32:59 2009 +0200" }, "message": "hwmon: Add Asus ATK0110 support\n\nAsus boards have an ACPI interface for interacting with the hwmon (fan,\ntemperatures, voltages) subsystem; this driver exposes the relevant\ninformation via the standard sysfs interface.\n\nThere are two different ACPI interfaces:\n- an old one (based on RVLT/RFAN/RTMP)\n- a new one (GGRP/GITM)\nBoth may be present but there a few cases (my board, sigh) where the\nnew interface is just an empty stub; the driver defaults to the old one\nwhen both are present.\nThe old interface has received a considerable testing, but I\u0027m still\nawaiting confirmation from my tester that the new one is working as\nexpected (hence the debug code is still enabled).\n\nCurrently all the attributes are read-only, though a (partial) control\nshould be possible with a bit more work.\n\nSigned-off-by: Luca Tettamanti \u003ckronos.it@gmail.com\u003e\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "797eaa4b0242a41cb6bc913890b9ec22ec8788ed", "tree": "13dc3fad1780e0f3a5fa6fdec757ec20a2b88517", "parents": [ "d508afb437daee7cf07da085b635c44a4ebf9b38" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Apr 07 15:32:59 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Apr 07 15:32:59 2009 +0200" }, "message": "hwmon: (lm95241) Convert to new-style i2c driver\n\nThe legacy i2c binding model is going away really soon now, so convert\nthe lm95241 driver to the new binding model or it will break.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Davide Rizzo \u003celpa.rizzo@gmail.com\u003e\n" }, { "commit": "811158b147a503fbdf9773224004ffd32002d1fe", "tree": "0a11dcfefe721bfc38ea9f1f4a238822dbae0dda", "parents": [ "4e76c5ccd5ac9bd003467d3bb0f49b18572dd4cd", "b26e0ed4936b743b693a4cc1413561fa3e4eaf65" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Apr 03 15:24:35 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Apr 03 15:24:35 2009 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)\n trivial: Update my email address\n trivial: NULL noise: drivers/mtd/tests/mtd_*test.c\n trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h\n trivial: Fix misspelling of \"Celsius\".\n trivial: remove unused variable \u0027path\u0027 in alloc_file()\n trivial: fix a pdlfush -\u003e pdflush typo in comment\n trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL\n trivial: wusb: Storage class should be before const qualifier\n trivial: drivers/char/bsr.c: Storage class should be before const qualifier\n trivial: h8300: Storage class should be before const qualifier\n trivial: fix where cgroup documentation is not correctly referred to\n trivial: Give the right path in Documentation example\n trivial: MTD: remove EOL from MODULE_DESCRIPTION\n trivial: Fix typo in bio_split()\u0027s documentation\n trivial: PWM: fix of #endif comment\n trivial: fix typos/grammar errors in Kconfig texts\n trivial: Fix misspelling of firmware\n trivial: cgroups: documentation typo and spelling corrections\n trivial: Update contact info for Jochen Hein\n trivial: fix typo \"resgister\" -\u003e \"register\"\n ...\n" }, { "commit": "bb233fdfc7b7cefe45bfa2e8d1b24e79c60a48e5", "tree": "b95c8f5b1a26f807755ca18d99b09627e184b33e", "parents": [ "a38da2ed74f628c1f3e907c772be21a66eccab9c" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Tue Mar 31 15:24:33 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:22 2009 -0700" }, "message": "lis3: SPI transport layer\n\nMake use of the new abstraction layer and add a new transport layer for\nspi. Works fine on a PXA based board.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nAcked-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "a38da2ed74f628c1f3e907c772be21a66eccab9c", "tree": "e89697d25518dcca9861d6f65933fc3327cd5933", "parents": [ "ab337a632783c251a3c3852aec0ead8a0281cbdd" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Tue Mar 31 15:24:32 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:22 2009 -0700" }, "message": "lis3: solve dependency between core and ACPI\n\nThis solves the dependency between lis3lv02d.[ch] and ACPI specific\nmethods. It introduces a -\u003ebus_priv pointer to the device struct which is\ncasted to \u0027struct acpi_device\u0027 in the ACIP layer. Changed hp_accel.c\naccordingly.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nAcked-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ab337a632783c251a3c3852aec0ead8a0281cbdd", "tree": "98a644e1c14a47164c52ed08e35e0a0e0d13f869", "parents": [ "12a324b6a3758f04a952b99d75a625732d767585" ], "author": { "name": "Daniel Mack", "email": "daniel@caiaq.de", "time": "Tue Mar 31 15:24:31 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:22 2009 -0700" }, "message": "lis3: reorder functions to make forward decl obsolete\n\nMove lis3lv02d_init_device() down so that the forward declaration of\nlis3lv02d_add_fs() becomes unnecessary.\n\nSigned-off-by: Daniel Mack \u003cdaniel@caiaq.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nAcked-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "12a324b6a3758f04a952b99d75a625732d767585", "tree": "aebfc7fae40f8bfd28edeb2d152398318c541ad3", "parents": [ "9d7639d33a348d5637daa50bba27497e9f5dac64" ], "author": { "name": "Luca Cappa", "email": "lcappa@gmail.com", "time": "Tue Mar 31 15:24:31 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hp_accel: axis conversion for hp compaq 8710w\n\nI have a laptop HP Compaq 8710W, I compiled into my kernel the LIS3LV02DL\nand HP_ACCEL module drivers. While loading it cannot recognize the laptop\nmodel, so i am sending the necessary information to update the database of\naxis orientations.\n\n\u003eWhen the laptop is horizontal the position reported is about 0 for X and Y\n\u003eand a positive value for Z\nYes, it is about 0,0,1000, the actual reading says: (-17,-26,1018);\n\n\u003e If the left side is elevated, X increases (becomes positive)\nYes, X goes toward to positive 1000.\n\n\u003eIf the front side (where the touchpad is) is elevated, Y decreases (becomes negative)\nNo, Y goes toward to positive 1000.\n\n\u003eIf the laptop is put upside-down, Z becomes negative\nYes, the laptop on a table Z gives 1000, and if upsidedown the Z reads\n-1000.\n\nSo in few words the Y axis is inverted.\n\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9d7639d33a348d5637daa50bba27497e9f5dac64", "tree": "c44485bedfbb2c618e2fdf0787c9215e3ea52c8b", "parents": [ "72f5de92e199f96cfcea125aefc76c138d8c553c" ], "author": { "name": "Pavel Machek", "email": "pavel@ucw.cz", "time": "Tue Mar 31 15:24:29 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hp_accel: add two more axis information\n\nAdd two more laptops to whitelist.\n\nSigned-off-by: Michal Marek \u003cmmarek@suse.cz\u003e\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Daniel Mack \u003cdaniel@caiaq.de\u003e\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nCc: Vladimir Botka \u003cvbotka@suse.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "72f5de92e199f96cfcea125aefc76c138d8c553c", "tree": "ef24990f791801283f520b5f96a4ea1e592bf37b", "parents": [ "061603275814544842e7df77d1157eff18565997" ], "author": { "name": "Ira Snyder", "email": "iws@ovro.caltech.edu", "time": "Tue Mar 31 15:24:29 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hwmon: Add LTC4215 driver\n\nAdd Linux support for the Linear Technology LTC4215 Hot Swap controller\nI2C monitoring interface.\n\nI have tested the driver with my board, and it appears to work fine. With\nthe power supplies disabled, it reads 11.93V input, 1.93V output, no\ncurrent and no power. With the supplies enabled, it reads 11.93V input,\n11.98V output, no current, no power. I\u0027m not drawing any current at the\nmoment, so this is reasonable. The value in the sense register never\nreads anything except 0, so I expect to get zero from the current and\npower calculations.\n\nI didn\u0027t attempt to support changing any of the chip\u0027s settings or\nenabling the FET. I\u0027m not sure even how to do that and still fit within\nthe hwmon framework. :)\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "061603275814544842e7df77d1157eff18565997", "tree": "4582b2e3e156eb2f0984df34e5469c96c3c4f9c0", "parents": [ "be84cfc588b19f14764d78556dc7b630ee8c914c" ], "author": { "name": "Davide Rizzo", "email": "elpa.rizzo@gmail.com", "time": "Tue Mar 31 15:24:27 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hwmon: LM95241 driver\n\nAn hwmon driver for the National Semiconductor LM95241 triple temperature\nsensors chip\n\nSigned-off-by: Davide Rizzo \u003celpa-rizzo@gmail.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: \"Mark M. Hoffman\" \u003cmhoffman@lightlink.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "be84cfc588b19f14764d78556dc7b630ee8c914c", "tree": "eb9e812f10199e8a8bddf8dd8f9dfa2f02b04e62", "parents": [ "2b872903c5d66bccdf4306a35e3e94d4da8555d3" ], "author": { "name": "Pavel Machek", "email": "pavel@ucw.cz", "time": "Tue Mar 31 15:24:26 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Apr 01 08:59:21 2009 -0700" }, "message": "hp_accel: adev is poor name of exported symbol\n\nAs Andrew noted, adev is pretty poor name for symbol being exported.\nRename it to lis3.\n\nSigned-off-by: Pavel Machek \u003cpavel@ucw.cz\u003e\nCc: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nCc: Vladimir Botka \u003cvbotka@suse.cz\u003e\nCc: \u003cQuoc.Pham@hp.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "de15f093e666ccd542f6f7a0e3e917166a07ab44", "tree": "ba0fb9235e3267812f2580306c27d7087d9fd7f3", "parents": [ "c69ab2b78efbe388bb0fc5d885b718ff4668cceb" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "message": "hwmon: (fschmd) Add support for the FSC Hades IC\n\nAdd support for the Hades to the FSC hwmon driver.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "c69ab2b78efbe388bb0fc5d885b718ff4668cceb", "tree": "a970ddcc436d1e80cc37e2937f8e32883afe73ba", "parents": [ "fa5bfab7128e58c31448fca83a288a86e7d476cc" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:45 2009 +0200" }, "message": "hwmon: (fschmd) Add support for the FSC Syleus IC\n\nMany thanks to Fujitsu Siemens Computers for providing docs and a\nmachine to test the driver on.\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e7a19c5624c66afa8118b10cd59f87ee407646bc", "tree": "4e70f99aa84cdd18f13c673980afebe4a268359e", "parents": [ "ec19920944246b4686c7772a58507a20c361dc9d" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:44 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:44 2009 +0200" }, "message": "dmi: Let dmi_walk() users pass private data\n\nAt the moment, dmi_walk() lacks flexibility, users can\u0027t pass data to\nthe callback function. Add a pointer for private data to make this\nfunction more flexible.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nCc: Matthew Garrett \u003cmjg@redhat.com\u003e\nCc: Roland Dreier \u003crolandd@cisco.com\u003e\n" }, { "commit": "fb4504fe84b09cbf49fda19e6630a1003d79656a", "tree": "d2e623b65fb91f18a02b3435f5a25e8b36572815", "parents": [ "a157d06d4d70318a0818552095071d7430dd5d34" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:43 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:43 2009 +0200" }, "message": "Move the pcf8591 driver to hwmon\n\nDirectory drivers/i2c/chips is going away, so drivers there must find\nnew homes. For the pcf8591 driver, the best choice seems to be the\nhwmon subsystem. While the Philips PCF8591 device isn\u0027t a typical\nhardware monitoring chip, its DAC interface is compatible with the\nhwmon one, so it fits somewhat.\n\nIf a better subsystem is ever created for ADC/DAC chips, the driver\ncould be moved there.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "a157d06d4d70318a0818552095071d7430dd5d34", "tree": "314ce9e6a3920071dcc364219521ba82675bdaac", "parents": [ "237c8d2f54ff12bd4fea1a9d18a94ae5810271d3" ], "author": { "name": "Gong Jun", "email": "JGong@nuvoton.com", "time": "Mon Mar 30 21:46:43 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:43 2009 +0200" }, "message": "hwmon: (w83627ehf) Only expose in6 or temp3 on the W83667HG\n\nThe pin for in6 and temp3 is shared on the W83667HG, so only one of\nthese features can be supported on any given system. Let the driver\nselect which one depending on the temp3 disabled bit.\n\nSigned-off-by: Gong Jun \u003cJGong@nuvoton.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "237c8d2f54ff12bd4fea1a9d18a94ae5810271d3", "tree": "f93114b8b4c24a59151353cdfb63dd52fa055f9b", "parents": [ "1704b26ee3fd89c76724cbea238e951dc019faca" ], "author": { "name": "Gong Jun", "email": "JGong@nuvoton.com", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "message": "hwmon: (w83627ehf) Add support for W83667HG\n\nAdd initial support for the Nuvoton W83667HG chip to the w83627ehf\ndriver. It has been tested on ASUS P5QL PRO by Gong Jun.\n\nAt the moment there is still a usability issue which is that only in6\nor temp3 can be present on the W83667HG, so the driver shouldn\u0027t\nexpose both. This will be addressed later.\n\nSigned-off-by: Gong Jun \u003cJGong@nuvoton.com\u003e\nAcked-by: David Hubbard \u003cdavid.c.hubbard@gmail.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1704b26ee3fd89c76724cbea238e951dc019faca", "tree": "8ad08be8be5e6ae2eeb523cb03c2db2a24ca2506", "parents": [ "b6a33fe2cc1b44851174967943fe5989f7e0550f" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "message": "hwmon: (w83627ehf) Invert fan pin variables logic\n\nUse positive logic for fan pin variables (variable is set if pin is\nused for fan), instead of negative logic which is error prone.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Gong Jun \u003cJGong@nuvoton.com\u003e\n" }, { "commit": "b6a33fe2cc1b44851174967943fe5989f7e0550f", "tree": "a39d183d672aa9d94b3bf78fbffa78986ff5dbad", "parents": [ "2b8cf3e8c0638687a7a28a7517e673f855623e3b" ], "author": { "name": "Frank Seidel", "email": "frank@f-seidel.de", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:42 2009 +0200" }, "message": "hwmon: (hdaps) Fix Thinkpad X41 axis inversion\n\nFix for kernel.org bug #7154: hdaps inversion of actual Thinkpad\nX41\u0027s Y-axis.\n\nSigned-off-by: Frank Seidel \u003cfrank@f-seidel.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "2b8cf3e8c0638687a7a28a7517e673f855623e3b", "tree": "0c549bbfb7d6f195d9e1e7b0412ae96884d311d0", "parents": [ "25f3311acc3405dd0dace3571a41f450e6cc6a65" ], "author": { "name": "Frank Seidel", "email": "frank@f-seidel.de", "time": "Mon Mar 30 21:46:41 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:41 2009 +0200" }, "message": "hwmon: (hdaps) Allow inversion of separate axis\n\nFix for kernel.org bug #7154: hdaps inversion of each axis. This\nversion is based on the work from Michael Ruoss \u003cmiruoss@student.ethz.ch\u003e.\n\nSigned-off-by: Frank Seidel \u003cfrank@f-seidel.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e4879e28abd67b894fb9d2db0afd08f1945670ba", "tree": "e6e9c1269c9ed949fb89bf7d31e116ace255d2ff", "parents": [ "594592dc6f68356a3b7278eb4d260a50a66f0a06" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:40 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:40 2009 +0200" }, "message": "hwmon: (ds1621) Avoid unneeded register access\n\nRegister access over SMBus isn\u0027t cheap, so avoid register access where\npossible:\n* Only write back the configuration register if it changed.\n* Don\u0027t refresh the register cache when we don\u0027t have to.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "594592dc6f68356a3b7278eb4d260a50a66f0a06", "tree": "0bdb535a8e3bcd0f4ea03fdc86842709e9ea4b50", "parents": [ "9202add67454c6a6f9508f41e733edce705dc56e" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:40 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:40 2009 +0200" }, "message": "hwmon: (ds1621) Clean up register access\n\nFix a few oddities in how the ds1621 driver accesses the registers:\n* We don\u0027t need a wrapper to access the configuration register.\n* Check for error before calling swab16. Error checking isn\u0027t\n complete yet, but that\u0027s a start.\n* Device-specific read functions should never be called during\n detection, as by definition we don\u0027t know what device we are talking\n to at that point.\n* Likewise, don\u0027t assume that register reads succeed during detection.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "9202add67454c6a6f9508f41e733edce705dc56e", "tree": "c95085164215c9374e838f1bf3f6051b74d99441", "parents": [ "0d34fb8e93ceba7b6dad0062dbb4a0813bacd75b" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:40 2009 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Mon Mar 30 21:46:40 2009 +0200" }, "message": "hwmon: (ds1621) Reorder code statements\n\nReorder the ds1621 driver code so that we can get rid of forward\nfunction declarations.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Aurelien Jarno \u003caurelien@aurel32.net\u003e\n" }, { "commit": "b26e0ed4936b743b693a4cc1413561fa3e4eaf65", "tree": "121190dd9deb3596ed3452d141db0704951c82f2", "parents": [ "23d42494915d4dbdf99bccd35a76f3d45fbed62e" ], "author": { "name": "Riku Voipio", "email": "riku.voipio@iki.fi", "time": "Tue Mar 03 21:37:17 2009 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Mar 30 15:22:04 2009 +0200" }, "message": "trivial: Update my email address\n\nUpdate my email address.\n\nSigned-off-by: Riku Voipio \u003criku.voipio@iki.fi\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "51b3e2700177b89fdb0d985926ce777a7ad52b15", "tree": "fd616c0db5df31f27d435196a575ec93e2fa5eba", "parents": [ "e267d25005c861fe6afda343f044536342c9f8b4" ], "author": { "name": "Andrew Klossner", "email": "andrew@cesa.opbu.xerox.com", "time": "Thu Mar 12 13:36:39 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Mar 12 13:36:39 2009 +0100" }, "message": "hwmon: (f75375s) Remove unnecessary and confusing initialization\n\nf75375_probe calls i2c_get_clientdata to initialize the data pointer,\nbut there isn\u0027t yet any client data to get, and the value is never\nused before the variable is assigned a new value seven lines later.\n\nThe call doesn\u0027t hurt anything and wastes only a couple of cycles.\nThe reason to fix it is because this module serves as an example to\nhackers writing new hwmon drivers, and this part of the example is\nconfusing.\n\nSigned-off-by: Andrew Klossner \u003candrew@cesa.opbu.xerox.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "e267d25005c861fe6afda343f044536342c9f8b4", "tree": "8fdbf47472bdcf4c0d3faa07aeea184fea3d019b", "parents": [ "1a51e068c900eb6ea23ce597361ebf3b19a57b23" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Mar 12 13:36:39 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Mar 12 13:36:39 2009 +0100" }, "message": "hwmon: (it87) Properly decode -128 degrees C temperature\n\nThe it87 driver is reporting -128 degrees C as +128 degrees C.\nThat\u0027s not a terribly likely temperature value but let\u0027s still\nget it right, especially when it simplifies the code.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1a51e068c900eb6ea23ce597361ebf3b19a57b23", "tree": "dc09428e13a8696d03f5c5919dc5bb867d7f63cc", "parents": [ "3bb9db79235e19dbb18ba6f4a428a97c69115319" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Thu Mar 12 13:36:38 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Mar 12 13:36:38 2009 +0100" }, "message": "hwmon: (lm90) Document support for the MAX6648/6692 chips\n\nUpdate documentation to prevent further confusion/duplication.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3bb9db79235e19dbb18ba6f4a428a97c69115319", "tree": "fdbd5f7157ff3c57c9981e118df00a3261a24f76", "parents": [ "ebdcc81c71937b30e09110c02a1e8a21fa770b6f" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Mar 12 13:36:38 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Mar 12 13:36:38 2009 +0100" }, "message": "hwmon: (abituguru3) Fix I/O error handling\n\nFix a logic bug reported by Roel Kluin, by rewriting the error\nhandling code in a clearer way.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Roel Kluin \u003croel.kluin@gmail.com\u003e\nAcked-by: Alistair John Strachan \u003calistair@devzero.co.uk\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\n" }, { "commit": "8ef1f0291a5d126f678b2f0225843c1ab550559c", "tree": "68831716d0992a656132dce8ad159755df39d4e3", "parents": [ "c15ade65788b70797c947f7de3e049e6a23f407f" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Tue Mar 10 12:55:48 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 10 15:55:10 2009 -0700" }, "message": "lm85: add VRM10 support for adt7468 chip\n\nThe adt7468 chip supports VRM10 sensors just like the adt7463; add a\nmissing check for it.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c15ade65788b70797c947f7de3e049e6a23f407f", "tree": "cc19185bd91f520046864cf3725e4d2da0ae590b", "parents": [ "b943c460ff8556a193b28e2145b513f8b978e869" ], "author": { "name": "Darrick J. Wong", "email": "djwong@us.ibm.com", "time": "Tue Mar 10 12:55:47 2009 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 10 15:55:10 2009 -0700" }, "message": "lm85: fix the version check that broke adt7468 probing\n\nThe verstep check in the lm85 driver fails because the upper nibble of\nthe version register is 0x7, not 0x6, on the adt7468 chip. Probing of\nall adt7468s was broken by 69fc1feba2d5856ff74dedb6ae9d8c490210825c\n(\"hwmon: (lm85) Rework the device detection\"), and this patch fixes\nthat. Also add in a missing i2c_device_id that accidentally got dropped\nfrom the original patch.\n\nSigned-off-by: Darrick J. Wong \u003cdjwong@us.ibm.com\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9ccf3b5e8409927835c4d38cb2f380c9e4349e76", "tree": "b10e951d376aef142d15eec40b634e7cfe339251", "parents": [ "137bad32342a613586347341d1307c2b9812ef44" ], "author": { "name": "Giuseppe Bilotta", "email": "giuseppe.bilotta@gmail.com", "time": "Wed Feb 18 14:48:25 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Feb 18 15:37:54 2009 -0800" }, "message": "lis3lv02d: add axes knowledge of HP Pavilion dv5 models\n\nAdd support for HP Pavilion dv5.\n\nSince Intel-based models have an inverted x axis, while AMD-based models\nhave an inverted y axis, we introduce a new macro that special-cases axis\norientation based on two DMI entries: HP dv5 axis configuration is then\nbased on both the PRODUCT and BOARD name.\n\nSigned-off-by: Giuseppe Bilotta \u003cgiuseppe.bilotta@gmail.com\u003e\nCc: Eric Piel \u003cEric.Piel@tremplin-utc.net\u003e\nCc: Pavel Machek \u003cpavel@suse.cz\u003e\nTested-by: Palatis Tseng \u003cpalatis@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "137bad32342a613586347341d1307c2b9812ef44", "tree": "3ed900e263388a72f92930a8d91a9d2eb7f0a39b", "parents": [ "ef2cfc790bf5f0ff189b01eabc0f4feb5e8524df" ], "author": { "name": "Giuseppe Bilotta", "email": "giuseppe.bilotta@gmail.com", "time": "Wed Feb 18 14:48:24 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Feb 18 15:37:54 2009 -0800" }, "message": "lis3lv02d: support both one- and two-byte sensors\n\nSensors responding with 0x3B to WHO_AM_I only have one data register per\ndirection, thus returning a signed byte from the position which is\noccupied by the MSB in sensors responding with 0x3A.\n\nSince multiple sensors share the reply to WHO_AM_I, we rename the defines\nto better indicate what they identify (family of single and double\nprecision sensors).\n\nWe support both kind of sensors by checking for the sensor type on init\nand defining appropriate data-access routines and sensor limits (for the\njoystick) depending on what we find.\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Giuseppe Bilotta \u003cgiuseppe.bilotta@gmail.com\u003e\nAcked-by: Eric Piel \u003cEric.Piel@tremplin-utc.net\u003e\nCc: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "ef2cfc790bf5f0ff189b01eabc0f4feb5e8524df", "tree": "1e1a4999a6615f66f56ffe19c883e065aa8d3020", "parents": [ "3a5093ee6728c8cbe9c039e685fc1fca8f965048" ], "author": { "name": "Pavel Machek", "email": "pavel@suse.cz", "time": "Wed Feb 18 14:48:23 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Feb 18 15:37:54 2009 -0800" }, "message": "hp accelerometer: add freefall detection\n\nThis adds freefall handling to hp_accel driver. According to HP, it\nshould just work, without us having to set the chip up by hand.\n\nhpfall.c is example .c program that parks the disk when accelerometer\ndetects free fall. It should work; for now, it uses fixed 20seconds\nprotection period.\n\nSigned-off-by: Pavel Machek \u003cpavel@suse.cz\u003e\nCc: Thomas Renninger \u003ctrenn@suse.de\u003e\nCc: Éric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "18632f84fac770125c0982dfadec6b551e82144e", "tree": "9bcf592080c5f19f22a5ef726f0f4fa866ee381b", "parents": [ "603eaa1bdd3e0402085e815cc531bb0a32827a9e" ], "author": { "name": "Hans de Goede", "email": "hdegoede@redhat.com", "time": "Tue Feb 17 19:59:54 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Feb 17 19:59:54 2009 +0100" }, "message": "hwmon: Fix ACPI resource check error handling\n\nThis patch fixes a number of cases where things were not properly\ncleaned up when acpi_check_resource_conflict() returned an error,\ncausing oopses such as the one reported here:\nhttps://bugzilla.redhat.com/show_bug.cgi?id\u003d483208\n\nSigned-off-by: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "603eaa1bdd3e0402085e815cc531bb0a32827a9e", "tree": "8047d2da3934549f8b9003dbfe9bdab570a6a244", "parents": [ "d2f8d7ee1a9b4650b4e43325b321801264f7c37a" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Feb 17 19:59:54 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Tue Feb 17 19:59:54 2009 +0100" }, "message": "hwmon: (f71882fg) Hide misleading error message\n\nIf the F71882FG chip is at address 0x4e, then the probe at 0x2e will\nfail with the following message in the logs:\nf71882fg: Not a Fintek device\n\nThis is misleading because there is a Fintek device, just at a\ndifferent address. So I propose to degrade this message to a debug\nmessage.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nAcked-by: Hans de Goede \u003chdegoede@redhat.com\u003e\n" }, { "commit": "87357d277a024934389ddc37808290c53c74339e", "tree": "2ac98eea38e6f1c746f22088db8245c5ab570f39", "parents": [ "c77a022d2994b0ccfb583c7dfd6392e3cd0391fe" ], "author": { "name": "Martin Kebert", "email": "gkmarty@gmail.com", "time": "Wed Feb 04 15:12:12 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Feb 05 12:56:47 2009 -0800" }, "message": "lis3lv02d: add axes knowledge for HP 6710\n\nAdd support for the HP laptops of model 6710x for having correctly setup\naxes.\n\nSigned-off-by: Martin Kebert \u003cgkmarty@gmail.com\u003e\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nAcked-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c77a022d2994b0ccfb583c7dfd6392e3cd0391fe", "tree": "5181d171af1c126d07bdf159a064f7ef0e33ec25", "parents": [ "80eda5fb5885d601ed2c712a0530770c0a23cc04" ], "author": { "name": "Pavel Herrmann", "email": "morpheus.ibis@gmail.com", "time": "Wed Feb 04 15:12:11 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Feb 05 12:56:47 2009 -0800" }, "message": "lis3lv02d: add axes knowledge for HP 6730\n\nAdd support for the HP laptops of model 6730x for having correctly setup\naxes.\n\nSigned-off-by: Pavel Herrmann \u003cmorpheus.ibis@gmail.com\u003e\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nAcked-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "80eda5fb5885d601ed2c712a0530770c0a23cc04", "tree": "91f5eba014223c57ec4e743b7ca4cdc246adeb73", "parents": [ "6bfef2b3cfe1144bd1dc3aface9c63a3f06732a7" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Wed Feb 04 15:12:11 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Feb 05 12:56:47 2009 -0800" }, "message": "lis3lv02d: add axes knowledge for HP 6530\n\nAdd support for the HP laptops of model 6530x for having correctly setup\naxes.\n\nReported-by: Jerome Poulin \u003cjeromepoulin@gmail.com\u003e\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nAcked-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6bfef2b3cfe1144bd1dc3aface9c63a3f06732a7", "tree": "e7cdb79ad1dfbb4721c10d894481892de3848997", "parents": [ "44f0606d52d98ff05b3b62bb694821857e36819d" ], "author": { "name": "Jiri Tersel", "email": "tersel@mail.muni.cz", "time": "Wed Feb 04 15:12:09 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Feb 05 12:56:47 2009 -0800" }, "message": "lis3lv02d: add axes knowledge for HP 6510b\n\nAccording to dmesg my laptop model HP 6510b is not being recognized by this\ndriver. After I have modified \"lis3lv02d.c\" axes in Neverball are OK.\n\nSigned-off-by: Jiri Tersel \u003ctersel@mail.muni.cz\u003e\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nAcked-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "fb9f88e1dc76f9feb39d39c40a5d61aad6df4388", "tree": "997b366ef996bde434e7d838463219c9aedcec1c", "parents": [ "c189f4ec955e1fe4a2a2742d028aeecc52a5848a" ], "author": { "name": "Bharath Ramesh", "email": "bramesh@vt.edu", "time": "Thu Jan 29 14:25:24 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 29 18:04:45 2009 -0800" }, "message": "hwmon: applesmc: add support for MacPro 3 temperature sensors\n\nMacPro 3 have more temperature sensors than the previous MacPro\u0027s also the\nsensor THTG has been removed. This patch add supports for the newer\ntemperature sensors in the MacPro3.\n\nSigned-off-by: Bharath Ramesh \u003cbramesh@vt.edu\u003e\nSigned-off-by: Henrik Rydberg \u003crydberg@euromail.se\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "7e92214b539ea17ccaf0886d140cbba9801a4d40", "tree": "5a678acfca63f485fd02c83932ffcfa486657650", "parents": [ "6364853dabe78dda7ffdfb8803c1e56c0fff2e43", "46a5f173fc88ffc22651162033696d8a9fbcdc5c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:40:12 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:40:12 2009 -0800" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6\n\n* \u0027hwmon-for-linus\u0027 of git://jdelvare.pck.nerim.net/jdelvare-2.6:\n hwmon: (abituguru3) Fix CONFIG_DMI\u003dn fallback to probe\n hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX\n hwmon: (abituguru3) Match partial DMI board name strings\n hwmon: Add a driver for the ADT7475 hardware monitoring chip\n hwmon: (k8temp) Fix temperature reporting for (most) K8 RevG CPUs\n hwmon: (k8temp) Fix wrong sensor selection for AMD K8 RevF/RevG CPUs\n hwmon: (k8temp) Warn about fam F rev F errata\n" }, { "commit": "9e1c9d865543593ee92ec3a5075f064dec981a96", "tree": "b89aa477a142e50fb45553b63fa51a20e67d6e89", "parents": [ "219beb291ba9275dd676578724103abed4cfbfe3" ], "author": { "name": "Pavel Machek", "email": "pavel@suse.cz", "time": "Thu Jan 15 13:51:24 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:39:41 2009 -0800" }, "message": "hp_accel: do not call ACPI from invalid context\n\nThe LED on HP notebooks is connected through ACPI. That unfortunately\nmeans that it needs to be delayed by using schedule_work() to avoid\ncalling the ACPI interpreter from an invalid context.\n\n[akpm@linux-foundation.org: use flush_work() rather than sort-of reimplementing it]\nSigned-off-by: Pavel Machek \u003cpavel@suse.cz\u003e\nCc: Éric Piel \u003ceric.piel@tremplin-utc.net\u003e\nCc: Len Brown \u003clenb@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9e0c79782143a816ba7d7f0f6e195091a97053f6", "tree": "109a347061a1e2d1e08aa3908b893e2ee55f9732", "parents": [ "5b019e99016f3a692ba45bf68fba73a402d7c01a" ], "author": { "name": "Eric Piel", "email": "eric.piel@tremplin-utc.net", "time": "Thu Jan 15 13:51:23 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:39:40 2009 -0800" }, "message": "lis3lv02d: merge with leds hp disk\n\nMove the second part of the HP laptop disk protection functionality (a red\nled) to the same driver. From a purely Linux developer\u0027s point of view,\nthe led and the accelerometer have nothing related. However, they\ncorrespond to the same ACPI functionality, and so will always be used\ntogether, moreover as they share the same ACPI PNP alias, there is no\nother simple to allow to have same loaded at the same time if they are not\nin the same module. Also make it requires the led class to compile and\nupdate the Kconfig text.\n\nSigned-off-by: Pavel Machek \u003cpavel@suse.cz\u003e\nSigned-off-by: Eric Piel \u003ceric.piel@tremplin-utc.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "c3d6362b8717759de7f2086f9665a4d96cacbc51", "tree": "3474b8abc3a37cd645415f85ffc340c7d96c8d18", "parents": [ "db92a6502d4e8cb885e85e862b24ba5c07036fbf" ], "author": { "name": "Alex Murray", "email": "murray.alex@gmail.com", "time": "Thu Jan 15 13:51:08 2009 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jan 15 16:39:39 2009 -0800" }, "message": "hwmon: applesmc: fix light sensor readings on newer MacBooks\n\nThe light sensors ALV0 and ALV1 on newer MacBooks (early 2008 and later)\nchanged to report 10 bytes instead the earlier 6, and the sensor encoding\nsubsequently changed. As a result, the reported light sensors readings\nare much too low.\n\nVia experiments leading up to this patch, it seems only the ALV0 is\nreporting data, and the most useful value therein is a 10-bit big-endian\nvalue at offset 6. This suggests that a new protocol was added as a\nbackward-compatible replacement on top of the old one.\n\nThis patch makes applesmc report the improved light sensor reading for the\nnew machines, on a scale in conformance with earlier ones.\n\nSigned-off-by: Alex Murray \u003cmurray.alex@gmail.com\u003e\nSigned-off-by: Henrik Rydberg \u003crydberg@euromail.se\u003e\nCc: Nicolas Boichat \u003cnicolas@boichat.ch\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "46a5f173fc88ffc22651162033696d8a9fbcdc5c", "tree": "e4a1ac8140f0ae70e5956f866bb212973ea2d835", "parents": [ "3907a8def78a15cd91985c23a3e76b563f36929a" ], "author": { "name": "Alistair John Strachan", "email": "alistair@devzero.co.uk", "time": "Thu Jan 15 22:27:48 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 15 22:27:48 2009 +0100" }, "message": "hwmon: (abituguru3) Fix CONFIG_DMI\u003dn fallback to probe\n\nWhen CONFIG_DMI is not enabled, dmi detection should flag that no board\ncould be detected (err\u003d1) rather than another error condition (err\u003c0).\n\nThis fixes the fallback to manual probing for all motherboards, even\nthose without DMI strings, when CONFIG_DMI\u003dn.\n\nSigned-off-by: Alistair John Strachan \u003calistair@devzero.co.uk\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "3907a8def78a15cd91985c23a3e76b563f36929a", "tree": "2c0222a069d0403f15e44aca0530f71edccdad52", "parents": [ "058943ddcb7cb307a0c406088c1e61f203d8b66f" ], "author": { "name": "Alistair John Strachan", "email": "alistair@devzero.co.uk", "time": "Thu Jan 15 22:27:48 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 15 22:27:48 2009 +0100" }, "message": "hwmon: (abituguru3) Enable DMI probing feature on IN9 32X MAX\n\nSwitch the IN9 32X MAX over from port probing to the preferred DMI\nprobe method.\n\nSigned-off-by: Alistair John Strachan \u003calistair@devzero.co.uk\u003e\nTested-by: Paul Hartman \u003cpaul.hartman+gentoo@gmail.com\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "058943ddcb7cb307a0c406088c1e61f203d8b66f", "tree": "83fe67fa183d7b68ec3cf2c5f91918cd199e16a5", "parents": [ "1c301fc5394f7e1aa4c201e6e03d55d9c08b3bdf" ], "author": { "name": "Alistair John Strachan", "email": "alistair@devzero.co.uk", "time": "Thu Jan 15 22:27:47 2009 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Thu Jan 15 22:27:47 2009 +0100" }, "message": "hwmon: (abituguru3) Match partial DMI board name strings\n\nThe switch-over to using DMI board strings to identify abituguru3 compatible\nmainboards works most of the time, but sometimes the vendor has substantially\nmodified the board string between BIOS revisions.\n\nWe have found that the vendor chipset identification string (provided in\nbrackets) changes frequently and is of no use to us. The rest of the board\nstring sometimes changes in subtle ways, e.g. whitespace or variations in\ncapitalization.\n\nThe new comparison code checks only a part of the supplied DMI board string,\ntrimming the bracketed content, whitespace, and ignoring case as necessary.\n\nThis fixes a bug where an IP35 Pro running an early BIOS would not be\ndetected without the force\u003d1 module parameter, and also speculatively\nfixes other similiar issues.\n\nSigned-off-by: Alistair John Strachan \u003calistair@devzero.co.uk\u003e\nReported-by: Nick Pasich \u003cNewsLetters@nickandbarb.net\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" } ], "next": "1c301fc5394f7e1aa4c201e6e03d55d9c08b3bdf" }