)]}' { "log": [ { "commit": "fcfbea6273f428343dcbc23e94e8f366d12419cf", "tree": "a50c700ff796848803002581c7a528115317217e", "parents": [ "ed016bedc8c2af80b10a9d0558b537cf5e396636" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed Jul 27 11:04:58 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:13 2011 -0700" }, "message": "drivers: misc: Add pm8xxx based vibrator driver\n\nThis driver uses the timed output framework to\nsupport the vibrator functionality.\n\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "ed016bedc8c2af80b10a9d0558b537cf5e396636", "tree": "1674a8cae56c8fa2f0242adc1baa0a429f724608", "parents": [ "eac5dfa714c9075398daa1228212abb05235d95b" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Sat Jul 23 17:58:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:12 2011 -0700" }, "message": "msm-fb: display: back light support for mipi driver\n\nback light control logic is added to mipi driver. it supports\n100 levels\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "eac5dfa714c9075398daa1228212abb05235d95b", "tree": "ef227fadf024fea1367d5f7897e0fbc2ab2313cd", "parents": [ "dafcd3d095468cabf9bdf182fc0ddde7fc5cafa2" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Sat Jul 23 17:31:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:12 2011 -0700" }, "message": "msm: board: lpm gpio support to mipi driver\n\nlpm gpio support is added to mipi toshiba driver. it will provide\npwm signal to mipi panel driver to control the back light.\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "dafcd3d095468cabf9bdf182fc0ddde7fc5cafa2", "tree": "dc4fa0b306aa61fae7847945e282cd8ecbe0897d", "parents": [ "073b496f4e94e3c3a8344cac5a32b028b1407d6d" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Tue Aug 02 20:27:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:11 2011 -0700" }, "message": "msm: peripheral-reset-8960: Don\u0027t touch regulators for failed shutdowns\n\nAbort the shutdown (and skip disabling regulators) if the SCM\ncall to do a secure Q6 shutdown fails.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "073b496f4e94e3c3a8344cac5a32b028b1407d6d", "tree": "a3a176bc1808b835546e1149f688a35e89704775", "parents": [ "a78a740b89a4ea6fc1396535ca0ea26f23a2d98d" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Thu Jul 28 19:08:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:10 2011 -0700" }, "message": "msm: camera: Change log severity of vfe messages.\n\nCurrently the log message which indicates the\nnon-availability of free buffer when we receive\na frame notification from VFE is enabled\nby default. Since this does not necessarily\nindicate error, it might be misleading. Hence\nchange this to debug message.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "a78a740b89a4ea6fc1396535ca0ea26f23a2d98d", "tree": "abb7b789b0270b264392a86d91741e728c6d8a57", "parents": [ "e7833e230a3843070f4628532e5902442eeed2c4" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Aug 02 11:23:39 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:10 2011 -0700" }, "message": "msm: clock-8960: Differentiate voltages for SDC clocks\n\nThe SDC clocks have different frequency voltage pairs.\nAdd distinct frequency tables for the different pairs.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "e7833e230a3843070f4628532e5902442eeed2c4", "tree": "e03f9a3dd4f22763c91d3a332b5b2090e0024b05", "parents": [ "2fe35efa5b3075bc32d00356ad0004162d3df19d" ], "author": { "name": "Ravishangar Kalyanam", "email": "rkalya@codeaurora.org", "time": "Fri Jul 22 16:20:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:09 2011 -0700" }, "message": "msm_fb: display: Add MDP 4.2 histogram support for DSI Video\n\nSigned-off-by: Ravishangar Kalyanam \u003crkalya@codeaurora.org\u003e\n" }, { "commit": "2fe35efa5b3075bc32d00356ad0004162d3df19d", "tree": "1f8785c591857c11b91626cb9b1dbc5128ca8024", "parents": [ "6e669462548de5ad157da801c9f5459b1c59affd" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Thu Jul 28 10:20:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:08 2011 -0700" }, "message": "camera: v4l2: Add zoom support in driver.\n\nAdd implementation of G_CROP and event for\nzoom completion.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "6e669462548de5ad157da801c9f5459b1c59affd", "tree": "d322b8dadfa105db3e12c35f4f4f7534a2644468", "parents": [ "8d371f90391350b5efa8ba309d7689e2795a9875" ], "author": { "name": "Rahul Kashyap", "email": "rkashyap@codeaurora.org", "time": "Sat Jul 23 16:42:56 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:08 2011 -0700" }, "message": "board: msm7x27a: Put BT vregs in PinControl mode.\n\nBT vregs are being put in pin control mode\nso that they will go in low power mode when in standby.\n\nSigned-off-by: Rahul Kashyap \u003crkashyap@codeaurora.org\u003e\n" }, { "commit": "8d371f90391350b5efa8ba309d7689e2795a9875", "tree": "40b1fd296c43521e9520ff58ca8a97d21c7f3059", "parents": [ "58b5555b7d19272e43732364b68e5d7c74b30870" ], "author": { "name": "Maheshkumar Sivasubramanian", "email": "msivasub@codeaurora.org", "time": "Tue Jul 26 16:02:55 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:07 2011 -0700" }, "message": "msm: idle-v7: Fix for the issue of lost barrier during reset.\n\nOn Krait processor, there exists a CPU cycle when a CPU exits the reset\nstate where it could lose a barrier operation and thereby causing the\nother CPU to wait indefinitely. The issue exists on the version 1 of the\nkrait processors only.\n\nThe workaround for the problem is to have a CPU remove itself from the\ninner and outer shareability realms just before executing the WFI to\ncollapse and then add itself back to the inner and out shareablity\nrealms during warmboot. Howeveri, the L2CPMR register access, to remove a\nprocessor from the shareability realms, are available only in a secure\nstate. Hence, the kernel performs a SMC call to call into TZ to do the\nabove before TZ executes a WFI to initiate a power collapse.\n\nSigned-off-by: Maheshkumar Sivasubramanian \u003cmsivasub@codeaurora.org\u003e\n" }, { "commit": "58b5555b7d19272e43732364b68e5d7c74b30870", "tree": "9d2537078065e1ba86e3917eb30d3bed8413aa87", "parents": [ "c6af7ebd3f6dd9cca0755ecdf20450b9d7bb8f97" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Tue Aug 02 10:28:01 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:06 2011 -0700" }, "message": "msm_fb: display: Avoid BTA requests during panel init.\n\nBTA requests may fail during panel initialization if the DSI Client\nis not stabilized yet. Hence, avoid them during initialization.\n\nCRs-Fixed: 298789\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "c6af7ebd3f6dd9cca0755ecdf20450b9d7bb8f97", "tree": "ce1868e82aa37f1d86d50e4fc0c46e8a07f1bd0d", "parents": [ "c39c6095392ac395abdbd9c53d2e5e27fb1ff02d" ], "author": { "name": "Mahesh Lanka", "email": "mlanka@codeaurora.org", "time": "Tue Aug 02 18:00:35 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:06 2011 -0700" }, "message": "msm: adsp: Make pmem adsp as cached.\n\nMake pmem adsp region as cached. This change is required to get\nH.264 FWVGA 30fps performance through flash application.\nThe cahed buffers need to be invalidated before accessing them\nand need to be flushed after modification.\n\nSigned-off-by: Mahesh Lanka \u003cmlanka@codeaurora.org\u003e\n" }, { "commit": "c39c6095392ac395abdbd9c53d2e5e27fb1ff02d", "tree": "4416d6dea4652e0643020e7e5ba2d769c1e492de", "parents": [ "f98205f74a79311691e3e4bae1929c7ed3fe8d9a" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Fri Jul 29 18:36:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:05 2011 -0700" }, "message": "msm: memory: Store TTBR0 for post-mortem debugging.\n\nIt is useful to know where the most-recently-running\nprocess\u0027s page tables are located in memory in the event\nthat a crash occurs and memory dumps are available.\n\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "f98205f74a79311691e3e4bae1929c7ed3fe8d9a", "tree": "7f932227703e89c397e852b5e344dd3a41643b6a", "parents": [ "eb8c895a5f1fc4885d1016f2806f0aa00b9b4fad" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Sat Feb 19 17:08:15 2011 -0800" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:05 2011 -0700" }, "message": "pmic8058-vibrator: Do not call hrtimer_cancel when preemption is disabled\n\nThe hrtimer_cancel logic exposes a possible spinlock live-lock\nsituation, if this call is made when preemption is disabled.\nFix the code to avoid this situation.\n\nCRs-Fixed: 299333\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "eb8c895a5f1fc4885d1016f2806f0aa00b9b4fad", "tree": "faa6d0d1b667a718f11c09c19524586179d942a4", "parents": [ "0d9277c6c15665222a9cdb5d16e45cbb6055d147" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Mon Aug 01 15:21:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:04 2011 -0700" }, "message": "msm: camera: Remove obsolete code from AXI configuration\nfunction.\n\n- msm_pmem_region_lookup_3 is not needed anymore since\n the VFE gets the buffer information from the free\n queue of the media controller directly.\n- msm_frame_axi_cfg is not needed anymore since we dont\n need to invoke the above lookup function.\n- CMD_FRAME_BUF_RELEASE is not needed anymore since\n the buffer is directly added into the media controller\u0027s\n free queue when the user queues a buffer for processing.\n\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "0d9277c6c15665222a9cdb5d16e45cbb6055d147", "tree": "472f0465e33c3f617681b63d0f4cb7909c17a8ee", "parents": [ "36920d337a7546d8a049269555eb4a3c8a006d91" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Thu Jul 28 10:19:10 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:03 2011 -0700" }, "message": "camera: v4l2: Use v4l2_event for event from config to app.\n\nThis simplies the way event is propagated. Driver only needs\nto pass on the v4l2_event structure directly.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "36920d337a7546d8a049269555eb4a3c8a006d91", "tree": "94f4a14caccd35268f235ae6d595c29dd8b6a2da", "parents": [ "99a6a5d823c592eca4ad41acc42a8df1a8e618ea" ], "author": { "name": "Kenneth Heitke", "email": "kheitke@codeaurora.org", "time": "Wed Jul 20 16:44:30 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:03 2011 -0700" }, "message": "msm: Add SSBI support for APQ8064\n\nAdd the device definitions and platform data to support\nSSBI on APQ8064 targets.\n\nSigned-off-by: Kenneth Heitke \u003ckheitke@codeaurora.org\u003e\n" }, { "commit": "99a6a5d823c592eca4ad41acc42a8df1a8e618ea", "tree": "f607c0e85437303e2548ea3b5b4cd898f7a5348d", "parents": [ "0422bf5c2ead82614f366feb07a21f282765b277" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Wed Jul 13 10:14:06 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:02 2011 -0700" }, "message": "msm: rpm: Check and validate RPM driver version\n\nAn incompatible RPM driver version may cause Linux to boot with\nRPM ignoring all requests from Linux, to prevent that, ensure\nthe versions are compatible before intializing the RPM driver.\n\nBoard will fail to boot if the RPM driver detects an incompatible\nversion.\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "0422bf5c2ead82614f366feb07a21f282765b277", "tree": "58e36039476b8bbe4597ffae6821d9e341e00421", "parents": [ "b7eebabca836963277ad221db4a438c8a774dff0" ], "author": { "name": "Jeff Hugo", "email": "jhugo@codeaurora.org", "time": "Thu Jul 28 19:17:45 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:01 2011 -0700" }, "message": "msm: smd: fix event definition\n\nChange the definition of SMD_EVENT_REOPEN_READY to 5 so that it does not\nconflict with SMD_EVENT_STATUS.\n\nSigned-off-by: Jeffrey Hugo \u003cjhugo@codeaurora.org\u003e\n" }, { "commit": "b7eebabca836963277ad221db4a438c8a774dff0", "tree": "2d4e426dcec61ee89cf302714b1dd24380387a53", "parents": [ "320a7ca3c015992bfc8f56d3073e37a6e41d87a1" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Thu Jun 02 20:07:50 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:01 2011 -0700" }, "message": "msm: camera: Enhance i2c api to unify sensor driver\n\nUpdated the common camera sensor i2c functions to be\nmore generic.\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "320a7ca3c015992bfc8f56d3073e37a6e41d87a1", "tree": "739736051927f3f5b24bfaadd678420b3de0e8c5", "parents": [ "bb3d48517f5d590cb66cee5b2fe418abf4eb69d1" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Wed Aug 03 09:41:27 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:28:00 2011 -0700" }, "message": "msm : sdio: zero mailbox memory before reading it\n\nThis will prevent a case where sdio_al process old\nmailbox info.\n\nCRs-fixed: 298290\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "bb3d48517f5d590cb66cee5b2fe418abf4eb69d1", "tree": "bce355aae150400f0aacf3fd580b9564798fc639", "parents": [ "277533432d021b2f38b84289290e413adbae2d15" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Mon Aug 01 15:57:52 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:59 2011 -0700" }, "message": "msm_fb: display: disable fill screen with blank on early suspend\n\nDisable logic to fill framebuffer with black screen before early\nsuspend, this is causing slugish wipe off from top to bottom\nanimation on screen.\nThis logic is still needed for MDP3 because of hardware limitation.\n\nCRs-Fixed: 298050\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "277533432d021b2f38b84289290e413adbae2d15", "tree": "8e7c11c40eae7522e3ab1a6066a700919dcb3af4", "parents": [ "ef05b175f1f62481e62799b0129ef4d6e077fe7a" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Fri Jul 29 12:35:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:59 2011 -0700" }, "message": "msm: peripheral-reset-8960: Set the Q6 regulator\u0027s optimum mode\n\nSet the regulator optimum mode so that the Q6\u0027s power rails are\nin high power mode instead of low power mode.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "ef05b175f1f62481e62799b0129ef4d6e077fe7a", "tree": "f718b930af9018fab9b77140e5efaa4e89d9a390", "parents": [ "d9ad2f20a5532ceca14400a093de9309f3928ac3" ], "author": { "name": "Zhang Chang Ken", "email": "kenz@codeaurora.org", "time": "Wed Jul 27 15:28:13 2011 -0400" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:58 2011 -0700" }, "message": "msm: 8x60: enable dragonboard platform\n\nDragonboard platform is a low cost development platform for APQ8060.\nAdd dragonboard platform detection support.\n\nSigned-off-by: Zhang Chang Ken \u003ckenz@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/gpiomux-8x60.c\n\tarch/arm/mach-msm/gpiomux-8x60.h\n" }, { "commit": "d9ad2f20a5532ceca14400a093de9309f3928ac3", "tree": "4da55ba020732388d7ba7ef16663fa7362a7d7c1", "parents": [ "9daf934dc7a391afde0be2a8d524d4869a1f0995" ], "author": { "name": "Aparna Mallavarapu", "email": "aparnam@codeaurora.org", "time": "Wed Aug 03 18:00:01 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:58 2011 -0700" }, "message": "defconfig: msm7x27a: Enable BLK_DEV_LOOP and BLK_DEV_DM configs\n\nSome userspace applications depend on the dev nodes /dev/block/loop0\nand /dev/device-mapper and hence enabling these configs would create\nthem.\n\nSigned-off-by: Aparna Mallavarapu \u003caparnam@codeaurora.org\u003e\n" }, { "commit": "9daf934dc7a391afde0be2a8d524d4869a1f0995", "tree": "55ee9a074d4b639b2d442ae13d16919edab313db", "parents": [ "a2c689a175dfcaefaa2b93568f4d5058bb7d1158" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Aug 02 20:31:00 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:57 2011 -0700" }, "message": "build-all.py: Add support for apq defconfigs\n\nThere is an apq8064_defconfig. Compile it too.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "a2c689a175dfcaefaa2b93568f4d5058bb7d1158", "tree": "513d9350d9b09f03cb3a713caa97f037293fe280", "parents": [ "a610fb19b571d2c08ac2ae0201411908a3437c5d" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Tue Jul 26 14:35:31 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:56 2011 -0700" }, "message": "msm: camera: Support Demosaic ABF2 for vfe3.2\n\nAdded support for demosaic adaptive bayer filter for vfe3.2.\nThis module is used for noise suppression and edge enhancement.\n\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "a610fb19b571d2c08ac2ae0201411908a3437c5d", "tree": "eb03e83a6b4486bc081a2e314af7c27c5e80f521", "parents": [ "a02ef213066e163f2c9dfde2a3bab6cc0d94a090" ], "author": { "name": "Lucille Sylvester", "email": "lsylvest@codeaurora.org", "time": "Fri Jul 22 17:22:20 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:56 2011 -0700" }, "message": "msm: kgsl: Enable graphics footswitches on 8960\n\nSigned-off-by: Lucille Sylvester \u003clsylvest@codeaurora.org\u003e\n" }, { "commit": "a02ef213066e163f2c9dfde2a3bab6cc0d94a090", "tree": "259043a9b50d75da26c580f25e23014bf922c2d0", "parents": [ "e1d0862b4628ddc0b7d62ef54c5dd97fcc4bc13b" ], "author": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Tue Jun 28 00:57:25 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:55 2011 -0700" }, "message": "radio-tavarua: Changes for supporting the new FM Search Algorithm.\n\nAdded host side changes for supporting the new Bahama FM Searcher\nAlgorithm. This involves configuring the channel spacing as 100KHz\nand enabling the 200KHz enforcer for regions that are 200KHz spaced.\n\nSigned-off-by: Anantha Krishnan \u003cananthk@codeaurora.org\u003e\n" }, { "commit": "e1d0862b4628ddc0b7d62ef54c5dd97fcc4bc13b", "tree": "433ab818d20050e677615cdd3fff81c88dfd39c5", "parents": [ "49c37d6a469dcc3d2aab5b2bc3897a65dd43d9c9" ], "author": { "name": "Bradley Rubin", "email": "brubin@codeaurora.org", "time": "Wed Jul 20 18:01:35 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:54 2011 -0700" }, "message": "ASoC: WCD9310: Enable connection clock for ANC\n\nRegister CDC_CLK_OTHR_CTL bit 2 must be 1 when enabling\nany decimators or when enabling ANC.\n\nSigned-off-by: Brad Rubin \u003cbrubin@codeaurora.org\u003e\n" }, { "commit": "49c37d6a469dcc3d2aab5b2bc3897a65dd43d9c9", "tree": "a7349796d46d7bf5cfceb512b4df1e5cbd27c930", "parents": [ "5b04d356f55188a7e196a47c570e1cdf6f714c59" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Aug 01 11:52:00 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:54 2011 -0700" }, "message": "msm: Pass proper touchscreen firmware version\n\nPass the proper firmware version as part of pdata\nfor cypress tma controller chips used on 7x30 and\n8960.\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "5b04d356f55188a7e196a47c570e1cdf6f714c59", "tree": "141ea9d386a95e0f9de5fa82026a03b44830dfb9", "parents": [ "53508c11f53aa4edbe053c5d5c3c99d8ef768500" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Fri Jul 22 21:18:42 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:53 2011 -0700" }, "message": "msm camera: snapshot wavelet denoise support\n\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "53508c11f53aa4edbe053c5d5c3c99d8ef768500", "tree": "3effcc02aa397266f4d21578c1562a12a19ee657", "parents": [ "70391a32559a6c6fe63154d12f2ba48b8145b4f5" ], "author": { "name": "Maya Erez", "email": "merez@codeaurora.org", "time": "Mon Aug 01 14:04:03 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:52 2011 -0700" }, "message": "msm: sdio: add a test to calculate RTT on stream channels.\n\nThe test sends a packet and check how much time it takes\nfor the packet to loopback. The test calculates MIN, MAX and\naverage RTT.\n\nSigned-off-by: Maya Erez \u003cmerez@codeaurora.org\u003e\n" }, { "commit": "70391a32559a6c6fe63154d12f2ba48b8145b4f5", "tree": "9d6f5e3bb67c4ddff16f98c860a1888a2a031e1c", "parents": [ "2d4d2f6bab2b1294bf11337af0fd37ec72961c89" ], "author": { "name": "Sujith Reddy Thumma", "email": "sthumma@codeaurora.org", "time": "Mon Aug 01 10:33:21 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:52 2011 -0700" }, "message": "msm: board-msm7x27a: Set optimum drive strengths for SDC GPIOs\n\nWith insufficient drive strengths for SDC GPIO lines some old\nversioned SD/MMC cards may cause data CRC or data timeout errors\nbecause of invalid timing closures. To avoid this increase max.\ndrive strength current limit.\n\nDrive strengths\nfor SDC1 - DATA, CMD, CLK lines are set to 14mA.\nfor SDC2,3,4 - DATA, CMD lines are set to 10mA and CLK line is set to 8mA.\n\nCRs-Fixed: 296718\nSigned-off-by: Sujith Reddy Thumma \u003csthumma@codeaurora.org\u003e\n" }, { "commit": "2d4d2f6bab2b1294bf11337af0fd37ec72961c89", "tree": "ab5a20e907b6602db6d4b1425ffc2801cadf669c", "parents": [ "0d1f8ae690767d07f08e6f21d5fdba3d5b4aa852" ], "author": { "name": "Mayank Rana", "email": "mrana@codeaurora.org", "time": "Thu Jul 21 17:31:31 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:51 2011 -0700" }, "message": "msm_serial_hs: Disable Rx DM Interface before sending flush\n\nThe execution of Rx enqueue command, Rx flush command and setting of\nrx.flush state should happen in atomic way. It happens that start_rx()\nand set_termios() might be executing concurrently while doing Bluetooth\nON after some iterations, which is putting ADM into bad state and it\nstalls Rx transfer showing as Bus Error.\n\nDisable Rx DM Interface before sending flush command and changing\nprotocol configuration from set_termios(). This will make sure that even\nenqueue/flush is not in synchronization while changing the baud rate OR\nmoving between different line discipline (not supposed to happen\nfrequently, but in some case it is seen). There is hardware signals\n( uart _dm_rx_dm_req and uart _dm_rx_dm_ack ) between UARTDM core and ADM\nwhich is used to make request and acknowledge the same. Disabling Rx DM\ninterface causes ADM to terminate the current RX transfer.\n\nCRs-Fixed: 296523\nSigned-off-by: Mayank Rana \u003cmrana@codeaurora.org\u003e\n" }, { "commit": "0d1f8ae690767d07f08e6f21d5fdba3d5b4aa852", "tree": "4a5d8c41022819f224fc9647d9604179553d2511", "parents": [ "5bb7ece4d4b02ca96330571837117f5e61e52096" ], "author": { "name": "Amir Samuelov", "email": "amirs@codeaurora.org", "time": "Thu Jul 28 11:13:58 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:50 2011 -0700" }, "message": "msm: 8960: Add LiQUID machine support\n\nSigned-off-by: Amir Samuelov \u003camirs@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/Kconfig\n" }, { "commit": "5bb7ece4d4b02ca96330571837117f5e61e52096", "tree": "6bf961efb6205d07f1932a6dbfdc82ff4ce9523d", "parents": [ "492049ec4f59bf04275878a9d16ae20528159636" ], "author": { "name": "Jeremy Gebben", "email": "jgebben@codeaurora.org", "time": "Tue Aug 02 11:04:48 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:50 2011 -0700" }, "message": "msm: kgsl: add adreno225 support\n\nThe adreno220 specific registers and setting are all used\non adreno225. Also there is a a225 specific setting setting\nfor REG_SQ_FLOW_CONTROl at startup to enable the larger\ninstruction store found on this gpu.\n\nSigned-off-by: Jordan Crouse \u003cjcrouse@codeaurora.org\u003e\nSigned-off-by: Jeremy Gebben \u003cjgebben@codeaurora.org\u003e\n" }, { "commit": "492049ec4f59bf04275878a9d16ae20528159636", "tree": "7fb632dbeb41cea15dd1959b8aa95a0fa82e7053", "parents": [ "4d28c093e70f2cde3369f7fc021e1b14d1875346" ], "author": { "name": "Adrian Salido-Moreno", "email": "adrianm@codeaurora.org", "time": "Mon Aug 01 14:06:21 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:49 2011 -0700" }, "message": "msm_fb: display: clear interrupt flag to properly wait for vsync\n\nneed to properly clear vsync interrupt flag so that subsequent waits\nfor vsync are handled properly, otherwise wait will return before next\nvsync happens\n\nCRs-Fixed: 299043\nSigned-off-by: Adrian Salido-Moreno \u003cadrianm@codeaurora.org\u003e\n" }, { "commit": "4d28c093e70f2cde3369f7fc021e1b14d1875346", "tree": "19adec0ecc50674a2e5dee3c6bd6a2fde4d8f25e", "parents": [ "6b3eb1abf195fa795545b0c9937b5561c481d763" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Thu Jul 14 15:40:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:48 2011 -0700" }, "message": "camera: 8960: Enable GDHS support.\n\nEnable GDHS support for VFE, VPE, and IJPEG.\n\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "6b3eb1abf195fa795545b0c9937b5561c481d763", "tree": "c7614da901d02d3dd5b8a86bc9d3cb24b525ff3a", "parents": [ "22b0a79c2b6b8ada96088887a641e044d1d8cda6" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Sun Jun 12 13:29:08 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:48 2011 -0700" }, "message": "pmem: Correctly account for aligned blocks\n\nwhen finding an aligned chunk, the allocator cannot assume that\nbit 0 will point to an aligned block. The only way to guarantee\na block will be aligned is to pass in the starting bit of a block\nthat is aligned. if t is the start bit which points to an aligned\nblock, and s is the spacing, bit t+n*s is guaranteed to be aligned\nto spacing s for positive integer values of n.\n\nCRs-Fixed: 288000\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "22b0a79c2b6b8ada96088887a641e044d1d8cda6", "tree": "a18afdb59b0f06c25232c9fc17f8c31a5846d990", "parents": [ "1cef4a0f3734d2173195cfef8c3de65348440fbc" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Mon Aug 01 16:39:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:47 2011 -0700" }, "message": "msm: clock: Remove unused #define CLK_FIRST_AVAILABLE_FLAG\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "1cef4a0f3734d2173195cfef8c3de65348440fbc", "tree": "364bcbda98ad35150b758bf7740199c6a6d5e514", "parents": [ "3498c93be09d629575bfdc5f85f1d82b98a2034d" ], "author": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Aug 01 11:48:42 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:46 2011 -0700" }, "message": "input: cyttsp-i2c: Verify checksum before firmware upgrade\n\nSigned-off-by: Mohan Pallaka \u003cmpallaka@codeaurora.org\u003e\n" }, { "commit": "3498c93be09d629575bfdc5f85f1d82b98a2034d", "tree": "506147e63eca6125de1a2856576eff544e8a58e9", "parents": [ "7a54b4c07fa1057f528df61eb09ad09902d0ca32" ], "author": { "name": "Rajesha Kini", "email": "rkini@codeaurora.org", "time": "Tue Jul 19 19:58:27 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:46 2011 -0700" }, "message": "msm: audio: qdsp6: Add debugfs support for latency measurement\n\nAdded debugfs entries to support for latency measurement,these debugfs\nwould be used by latency measurement tool to automate the measurement.\n\nCRs-fixed: 291125\nSigned-off-by: Rajesha Kini \u003crkini@codeaurora.org\u003e\n" }, { "commit": "7a54b4c07fa1057f528df61eb09ad09902d0ca32", "tree": "4b389e342cff8b92fa547b17e55db6f66e989eb5", "parents": [ "52aa968cb6da594bf2b9c648c9dedfd7d3790578" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Jul 19 18:46:09 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:45 2011 -0700" }, "message": "usb: rmnet_sdio: Handle SDIO MUX add/removal events\n\nsdio mux channel can be removed/added anytime during an active\ndata call. When sdio mux channel is removed, free all buffers\nand indicate data call disconnection to usb host(laptop). SDIO\nchannel can be removed during modem sub-system restart.\nAlso add additional debug counters.\n\nCRs-Fixed: 294875\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "52aa968cb6da594bf2b9c648c9dedfd7d3790578", "tree": "287c776cfd17f7d3c703fdf54a246bf226713095", "parents": [ "e0c3e5f39e0e99d672990311a8a862c46312f18e" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Jul 20 14:05:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:45 2011 -0700" }, "message": "power: pm8921-bms: revise parameters preserved between reboots\n\nThere are parameters that need not be preserved between reboots.\nDelete them and clean up all the code that writes to them.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "e0c3e5f39e0e99d672990311a8a862c46312f18e", "tree": "5825a0a25e15d47b30965c4b24cf45d94cf0ba71", "parents": [ "eed550bc813a9bfeb105230eea8f4ce9f9acdabc" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Jul 11 21:17:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:44 2011 -0700" }, "message": "power: pm8921-charger: implement CURRENT_NOW property\n\nThe pm8921 bms driver can provide instantaneous current. Use the\ncurrent now property of the power_supply class to expose this\nfeature.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "eed550bc813a9bfeb105230eea8f4ce9f9acdabc", "tree": "e171827c531d4c708a7b48901461ffd2f3754d0f", "parents": [ "bf2ff51f752440e4eb005b1dbbc0ad9295de42fa" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Jul 18 22:35:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:43 2011 -0700" }, "message": "power: pm8921-bms: fix vsense conversion to microvolt\n\nSince the vsense readings are done from ccadc, use the conversion\nbased on cc_to_microvolt for all vsense readings.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "bf2ff51f752440e4eb005b1dbbc0ad9295de42fa", "tree": "87c436f30f7a54a15aadfb84b28cbdd1dd2acf34", "parents": [ "6870eff6a629c347aa1a23b94b10e4f1087425c0" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Fri Jul 22 13:43:11 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:43 2011 -0700" }, "message": "msm: 8064: Add cpu id to socinfo for apq8064\n\nsocinfo.id specified as 109.\n\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "6870eff6a629c347aa1a23b94b10e4f1087425c0", "tree": "7251ff7f3f4000c96dc328c9d556b8504e5af2ad", "parents": [ "d25a8ff131a9bfa3b408cfbba124e443735b7cdb" ], "author": { "name": "Joel King", "email": "joelking@codeaurora.org", "time": "Fri Jul 22 13:15:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:42 2011 -0700" }, "message": "msm: 8064: Config change to support gpio sysfs\n\nAdded CONFIG_DEBUG_GPIO\u003dy and CONFIG_GPIO_SYSFS\u003dy\nto the defconfig file for apq8064.\n\nSigned-off-by: Joel King \u003cjoelking@codeaurora.org\u003e\n" }, { "commit": "d25a8ff131a9bfa3b408cfbba124e443735b7cdb", "tree": "b3d9b4e33c584dc1141a1187e6796d69779e333d", "parents": [ "248eac2b1519a94c2587d627fe68a38727b16b58" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Thu Jul 28 18:36:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:41 2011 -0700" }, "message": "msm: camera: correct the buffer offset calculation.\n\nCorrect the cbcr offset calculation of the YUV buffer\nby padding the buffer height to multiple of 16.\n\nCRs-Fixed: 298346\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "248eac2b1519a94c2587d627fe68a38727b16b58", "tree": "a403528f60d97dc3604d87c5fcacf5a05d6e740f", "parents": [ "1a99033bf915b066ddb542b019091558d13bea54" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Tue Jul 12 14:24:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:41 2011 -0700" }, "message": "vidc: vdec: Report dropped field for interlace clips.\n\nFor field based interlace clips, video core will generate\nan error when one of field is missing in bitstream.\nDriver will report this to upper layer, so that it can\ntake appropriate action.\n\nCRs-fixed: 290659\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "1a99033bf915b066ddb542b019091558d13bea54", "tree": "3c69408127705b090c824b58e57a5f33b071f554", "parents": [ "e546d48310bbb1b62e56a4f361af923c8814de54" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Jul 26 20:31:23 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:40 2011 -0700" }, "message": "msm: camera: Disable flash for front camera\n\nLED flash is not needed for front camera\n\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "e546d48310bbb1b62e56a4f361af923c8814de54", "tree": "89bf82caf5cb7ecff24f75e9cf5c202297e172d3", "parents": [ "cc450c9f1ce3e966865365a727181f965df71daf" ], "author": { "name": "Ajay Singh Parmar", "email": "aparmar@codeaurora.org", "time": "Fri Jul 29 15:43:52 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:39 2011 -0700" }, "message": "msm_fb: display: Modify panel init commands for HVGA on 7x25A\n\nModify panel init commands to send the video timing values for\nHVGA resolution on 7x25A.\n\nCRs-Fixed: 297154\nSigned-off-by: Ajay Singh Parmar \u003caparmar@codeaurora.org\u003e\n" }, { "commit": "cc450c9f1ce3e966865365a727181f965df71daf", "tree": "6a67cde14bbe5dd091be08da5edec4fc794dfe10", "parents": [ "f2085cdbd15907d0a0a5e6d3e8f5726b05a52a11" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Wed Jul 27 14:38:15 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:39 2011 -0700" }, "message": "msm: ipc: Update server lookup to multiple compatible services\n\nIPC Router looks up all compatible services during the server\nlookup using the compatibility mask provided by the clients.\n\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "f2085cdbd15907d0a0a5e6d3e8f5726b05a52a11", "tree": "2e19dfdda5c7ef36625057b68925da1b603ec07f", "parents": [ "3f5d48fc8620c05d5d89635c6c98b56159c98516" ], "author": { "name": "Vamsi Krishna", "email": "vskrishn@codeaurora.org", "time": "Tue Jul 19 16:28:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:38 2011 -0700" }, "message": "usb: rmnet_sdio: Start IO only when USB and SDIO are available\n\nAllocate and Queue USB buffers only when USB and SDIO transports\nare available. This change would add flexibility to clean-up\ndriver state when one of the transports(usb/sdio) is removed or\nadded.\n\nSigned-off-by: Vamsi Krishna \u003cvskrishn@codeaurora.org\u003e\n" }, { "commit": "3f5d48fc8620c05d5d89635c6c98b56159c98516", "tree": "fe76089dc2040319c3153299c3d4ed9406069b38", "parents": [ "cc92269a0a80fba7e1e07ceef0db1498bad0dd1f" ], "author": { "name": "Krishna Konda", "email": "kkonda@codeaurora.org", "time": "Wed Jul 27 10:47:31 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:37 2011 -0700" }, "message": "mmc: msm_sdcc: Reset Data Path State Machine after every transaction\n\nReset DPSM by just clearing ENABLE bit in MMCIDATACTRL register\n\nSigned-off-by: Krishna Konda \u003ckkonda@codeaurora.org\u003e\n" }, { "commit": "cc92269a0a80fba7e1e07ceef0db1498bad0dd1f", "tree": "87cee453572188834d296238a2b419e07fe49b04", "parents": [ "8e7bd07ecd4e66f04c28ce3d090e0ce14a7df77f" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Aug 01 23:05:01 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:37 2011 -0700" }, "message": "mmc: msm_sdcc: put regulator in HPM before enabling it.\n\nIf regulator is enabled when it\u0027s in LPM (Low Power Mode),\nit takes ~400us to enable it where as if regulator is\nenabled when it\u0027s in HPM mode, it take \u003c 200us to enable\nit. This means immediately after enabling the regulator,\nit\u0027s usable as it was already in HPM mode.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "8e7bd07ecd4e66f04c28ce3d090e0ce14a7df77f", "tree": "6bb78724b23ffe6caa069fd7d32fffc4376afebc", "parents": [ "54d35c4578199441ee23e401d36e9554c9058a66" ], "author": { "name": "Hemant Kumar", "email": "hemantk@codeaurora.org", "time": "Mon Aug 01 14:14:24 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:36 2011 -0700" }, "message": "usb: msm_otg: Fix compliation error with CONFIG_PM\n\nSigned-off-by: Hemant Kumar \u003chemantk@codeaurora.org\u003e\n" }, { "commit": "54d35c4578199441ee23e401d36e9554c9058a66", "tree": "1a45870bdaf5bc4dbd5e17bc851de085f61698e5", "parents": [ "9802ca92950cee1c3314cc592743290e43c4a3d7" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Thu Jul 14 17:47:50 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:36 2011 -0700" }, "message": "msm: acpuclock: Add CPU freq. tables 7x25a\n\nMSM7x25a can run at max. freq. of 600Mhz and returns\nthe same PLL1_Lvalue as of MSM7x27 and due to which\nit defaults to the MSM7x27 tables, but the voltage\nlevels are not 1:1 mapped with 7x27 and actually has one less\nvoltage level. It is better to have separate tables\nin-order to keep MSM7x27 and MSM7x25a changes not impacting\neach other.\n\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "9802ca92950cee1c3314cc592743290e43c4a3d7", "tree": "d2f5eda773d6c0b5f671d289d020238e2cc83d55", "parents": [ "c50e30a43b78b54308f7c2681be42b5f110153bb" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Wed May 25 15:09:59 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:35 2011 -0700" }, "message": "msm: pil-8960: Support secure PIL\n\nAdd support for secure peripheral loading. In addition, add a\nmodule parameter \u0027secure_pil\u0027 for use on the kernel command line.\nThis allows CONFIG_MSM_SECURE_PIL to be overriden at runtime if\nneeded.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "c50e30a43b78b54308f7c2681be42b5f110153bb", "tree": "0fd6af499547dc4761e0a92d6b3c78927146edcb", "parents": [ "86edf6c98c622a0f512c689f9c80db8f811c1cc5" ], "author": { "name": "Pradnya Chaphekar", "email": "pradnyac@codeaurora.org", "time": "Mon Jun 27 13:57:16 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:34 2011 -0700" }, "message": "vidc: 1080p: Set chroma address change in smooth streaming mode\n\nIf resolution change is detected in smooth streaming mode and\nstatus indicates that video core can continue decoding, update\nchroma address for new resolution instead of starting frame\nrealloc.\n\nSigned-off-by: Pradnya Chaphekar \u003cpradnyac@codeaurora.org\u003e\n" }, { "commit": "86edf6c98c622a0f512c689f9c80db8f811c1cc5", "tree": "4fb256d394191e754996bad2e265de93223a4013", "parents": [ "b85333ef5e436e4d866745702aada1b370d4a541" ], "author": { "name": "Vasudeva Rao Thumati", "email": "vthuma@codeaurora.org", "time": "Wed Jul 06 16:25:13 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:34 2011 -0700" }, "message": "msm: 8660: audio: Fix check for out of bound exception\n\nFix upper limit check for out of bound exceptions\n\nSigned-off-by: Vasudeva Rao Thumati \u003cvthuma@codeaurora.org\u003e\nSigned-off-by: Deepa Madiregama \u003cdmadireg@codeaurora.org\u003e\n" }, { "commit": "b85333ef5e436e4d866745702aada1b370d4a541", "tree": "51b7ce6517a857055ea5e5a47fbe480ea4d7287f", "parents": [ "51a862174b6eb5df50eef4826020a3904b3c1ce2" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Fri Jul 29 12:33:37 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:33 2011 -0700" }, "message": "msm: audio: qdsp6v2: Fix for resetting the copp list.\n\nThis gerrit resets the copp list to a 32 bit value.\n\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "51a862174b6eb5df50eef4826020a3904b3c1ce2", "tree": "d1cc78cefd00665cfa1bf2db6065c144333d6dc3", "parents": [ "28009a866219e442335f04054d8f15cc49cb3641" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Fri Jul 29 12:43:43 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:32 2011 -0700" }, "message": "ASoC: msm: Return failure for invalid port id.\n\nReturn failure if port id is invalid.\n\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "28009a866219e442335f04054d8f15cc49cb3641", "tree": "1b6182731f34ce893551921eb6fa0ccd40e15834", "parents": [ "cc5dc7a1e144b8dceac20b2ed902de491108532d" ], "author": { "name": "Jeff Ohlstein", "email": "johlstei@codeaurora.org", "time": "Mon Jul 25 19:21:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:32 2011 -0700" }, "message": "msm: restart: reset pmic before rebooting or powering off\n\nThe pmic needs to shut off certain regulators and configure certain\ninterrupt status bits in order to properly shut down.\n\nSigned-off-by: Jeff Ohlstein \u003cjohlstei@codeaurora.org\u003e\n" }, { "commit": "cc5dc7a1e144b8dceac20b2ed902de491108532d", "tree": "b398d780dfecce51bf2cb648b2a66df55a7e29a8", "parents": [ "ff061c78b018857619d44979ef00100a887feec5" ], "author": { "name": "Gagan Mac", "email": "gmac@codeaurora.org", "time": "Thu Jul 28 16:58:59 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:31 2011 -0700" }, "message": "msm: msm_bus: Avoid zeroing very low bus requests\n\nWhen requests are sent for less than the width of the node,\nbandwidth to frequency conversion results in a zero value.\nFix that by rounding up.\n\nCRs-Fixed: 295930\nSigned-off-by: Gagan Mac \u003cgmac@codeaurora.org\u003e\n" }, { "commit": "ff061c78b018857619d44979ef00100a887feec5", "tree": "9339a698928ab6b64fea9fd9c9c31e3829c4d0d2", "parents": [ "cd2a59b6c2c291480f525300ed7a7238fe6d7685" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Mon Jun 27 14:22:33 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:31 2011 -0700" }, "message": "msm: 8960: Add the lpass driver for the 8960\n\nThis driver monitors lpass hardware watchdog interrupt\nlines and also plugs in to the subsystem restart and PIL\ndrivers to support the subsystem restart feature.\n\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "cd2a59b6c2c291480f525300ed7a7238fe6d7685", "tree": "f7e656730e63d805f55c01e096304dc49e90ed72", "parents": [ "746d9ab0dabf7165b88906860ed3b52b351bcfe8" ], "author": { "name": "Rohit Vaswani", "email": "rvaswani@codeaurora.org", "time": "Tue Jul 19 12:00:48 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:30 2011 -0700" }, "message": "msm: Add gpio expander support for 8960\n\n8960 has a camera gpio expander chip. Add support for it\n\nSigned-off-by: Rohit Vaswani \u003crvaswani@codeaurora.org\u003e\n" }, { "commit": "746d9ab0dabf7165b88906860ed3b52b351bcfe8", "tree": "2c08b6a614ed0fb9ef73bdd4324d66c37a009beb", "parents": [ "8954956f9dcd1cd7993d2f00836dc55c6a1dcbe8" ], "author": { "name": "Gopikrishnaiah Anandan", "email": "gopikr@codeaurora.org", "time": "Thu Jul 07 11:55:13 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:29 2011 -0700" }, "message": "vidc: vdec: Report bitstream errors to driver client.\n\nWhen video core generates recoverable bitstream errors,\ndriver will report them to upper layer.\n\nCRs-fixed: 290659\nSigned-off-by: Gopikrishnaiah Anandan \u003cgopikr@codeaurora.org\u003e\n" }, { "commit": "8954956f9dcd1cd7993d2f00836dc55c6a1dcbe8", "tree": "0d886c34c43a59edf1c0d550697adde5ad38de7f", "parents": [ "c4c58695631547fde87eb39b9685fb68bbf49b88" ], "author": { "name": "Vikram Mulukutla", "email": "markivx@codeaurora.org", "time": "Thu Jul 28 16:10:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:29 2011 -0700" }, "message": "msm: subsystem-fatal-8x60: Increase the post-SMSM_RESET delay to 20ms\n\nThe modem requires approximately 12-15ms to complete\nexecuting its error-fatal handler. Increase the delay\nafter setting the SMSM_RESET bit to 20ms to allow\nthe modem to finish executing the error-fatal\nhandler.\n\nSigned-off-by: Vikram Mulukutla \u003cmarkivx@codeaurora.org\u003e\n" }, { "commit": "c4c58695631547fde87eb39b9685fb68bbf49b88", "tree": "641198867535ecd6bc692b3e5d6fe1d443dd137c", "parents": [ "d906b52fcd603aacbd73b031f562dd01c87a8bf9" ], "author": { "name": "Harini Jayaraman", "email": "harinij@codeaurora.org", "time": "Tue Jul 19 14:50:10 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:28 2011 -0700" }, "message": "msm: Add SPI QUP support for APQ8064\n\nAdd the device definitions and platform data to support\nSPI QUP on APQ8064 simulator and RUMI3 targets.\n\nSigned-off-by: Harini Jayaraman \u003charinij@codeaurora.org\u003e\n" }, { "commit": "d906b52fcd603aacbd73b031f562dd01c87a8bf9", "tree": "5cf238c7506f8d1e7c7bd5422ab342407b4ac8d8", "parents": [ "e64d56adf12b0098ffe6f7af34785bd78580714f" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Jul 26 10:51:41 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:27 2011 -0700" }, "message": "msm: clock: Print name when warning about unbalanced disables\n\nMake debugging clk_enable()/clk_disable() imbalances easier by\nprinting the clock\u0027s debug name in the WARN.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "e64d56adf12b0098ffe6f7af34785bd78580714f", "tree": "9da711084bb023205f50e4cd54508997cc14927f", "parents": [ "a18a272982f05d15c1b169a00570945f57fa7265" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Jul 14 19:35:27 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:27 2011 -0700" }, "message": "msm: acpuclock-8960: Update the CPU, L2 and bus bandwidth tuples\n\nImprove on the initial performance level mappings with ones\nthat provide a better balance of power and performance. These\nwill likely change again upon further characterization.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "a18a272982f05d15c1b169a00570945f57fa7265", "tree": "7d3850552ff7b8e667da1be0fd04fdee61ad727a", "parents": [ "6822c68af686755d97eaa219ca91f9dac3298ade" ], "author": { "name": "Angshuman Sarkar", "email": "angshuman@codeaurora.org", "time": "Fri Jul 29 13:41:13 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:26 2011 -0700" }, "message": "msm: smd_pkt: rename apr_apps_user to apr_apps2\n\nRename the packet device and smd channel name.\n\nSigned-off-by: Angshuman Sarkar \u003cangshuman@codeaurora.org\u003e\n" }, { "commit": "6822c68af686755d97eaa219ca91f9dac3298ade", "tree": "a64e9f3d352816eaa444469562627a5d4e236c11", "parents": [ "161d678fa7e299416ad6b49ce4939641c4bd46fd" ], "author": { "name": "Santosh Sajjan", "email": "ssajjan@codeaurora.org", "time": "Tue Jul 26 10:49:36 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:25 2011 -0700" }, "message": "board-msm7x27a:wlan: Added support for Atheros wlan.\n\nAdded Atheros AR6003 wlan power management registration with kernel.\n\nSigned-off-by: Santosh Sajjan \u003cssajjan@codeaurora.org\u003e\n\nConflicts:\n\n\tarch/arm/mach-msm/board-msm7x27a.c\n" }, { "commit": "161d678fa7e299416ad6b49ce4939641c4bd46fd", "tree": "e18284549411688c042e71d56ac36ce1d23ff957", "parents": [ "15f2a5e23ecdcce7a286af8a7104650c94adebb1" ], "author": { "name": "Yan He", "email": "yanhe@codeaurora.org", "time": "Wed Jul 27 22:56:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:25 2011 -0700" }, "message": "platform-drivers: msm: sps: debugging function enhancement\n\nimprovements include:\n1\u003e avoid unnecessary string operation in ISR\n2\u003e enable detailed debug info output at runtime\n3\u003e use unlikely() macro to improve success of branch prediction\n\nSigned-off-by: Yan He \u003cyanhe@codeaurora.org\u003e\n" }, { "commit": "15f2a5e23ecdcce7a286af8a7104650c94adebb1", "tree": "b9c4f6e2289731bdad92c79ecbcd62b380b88550", "parents": [ "e6e4eb25abca5a09735b5a2346e2ace65c7d6d56" ], "author": { "name": "Jeevan Shriram", "email": "jshriram@codeaurora.org", "time": "Wed Jul 13 21:45:26 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:24 2011 -0700" }, "message": "msm_fb: display: remove LCDC_MUX_CTL configuration for msm 7x27a\n\nRemove RPC call to configure LCDC_MUX_CTL from apps for lcdc\ninterface on msm7x27a. Modem will configure the same going forward\n\nSigned-off-by: Jeevan Shriram \u003cjshriram@codeaurora.org\u003e\n" }, { "commit": "e6e4eb25abca5a09735b5a2346e2ace65c7d6d56", "tree": "bf0bb09d0485c0019d150af5894c9e6d0be0a3ba", "parents": [ "b808efac1fcc2d5027283ed90c0cc5c2a5031d5e" ], "author": { "name": "Sandeep Kodimela", "email": "skodimela@codeaurora.org", "time": "Thu Jul 28 18:34:19 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:24 2011 -0700" }, "message": "msm: camera: Fix camera switch from primary to secondary\n\navoid false sensor detection to ensure smooth switch between\nprimary to secondary camera sensor\n\nSigned-off-by: Sandeep Kodimela \u003cskodimela@codeaurora.org\u003e\n" }, { "commit": "b808efac1fcc2d5027283ed90c0cc5c2a5031d5e", "tree": "be446219d247baed8d9584c124c049bdba5db9b6", "parents": [ "c9f3509041a4de83c93453e2f39419557f274562" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Jun 27 15:14:07 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:23 2011 -0700" }, "message": "msm: msm_sdcc: Add DDR support for eMMC/MMC\n\nIf eMMC/MMC cards supports DDR mode, MMC core\nlayer checks if host controller supports the DDR\nmode or not and if host supports the DDR mode,\nMMC core layer calls the set_ios to set the\nDDR timing mode in host controller.\n\nThis change advertise that SDCC4 host controller\nsupports DDR mode timings and also sets DDR\ntiming mode when asked in set_ios.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "c9f3509041a4de83c93453e2f39419557f274562", "tree": "db178343a807fb588c02f45a2946afd5f706e7b7", "parents": [ "2dae2396e43d3dfd5b2509e411a101b459893d92" ], "author": { "name": "Shalabh Jain", "email": "shalabhj@codeaurora.org", "time": "Thu Jul 28 18:36:17 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:22 2011 -0700" }, "message": "diag: Ignore mode reset command for modem\n\nFor 8960, mode reset is being handled on apps processor. Hence diag\ndriver should not send the command to the modem processor.\n\nSigned-off-by: Shalabh Jain \u003cshalabhj@codeaurora.org\u003e\n" }, { "commit": "2dae2396e43d3dfd5b2509e411a101b459893d92", "tree": "e99190762e86f45afaba3b978d0b4d8f29df81e3", "parents": [ "d5e63af8efd52fa816bc9820e10dfd640770976c" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jul 14 18:31:28 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:22 2011 -0700" }, "message": "power: pmic8058-charger: chg_done interrupt storm fix\n\nA storm of chg_done interrupt was observed when isl charger\nis plugged in.\n\nRegister for only the rising edge of that interrupt instead\nfor both edges.\n\nAlso disable the interrupt in the handler - there is no reason\nfor the interrupt to stay enabled while it waits for a second\nfor stop_charging to happen.\n\nWhen the charger is asked to stop charging, it should disable\nthe interrupts before it cancels the workqueues. There is a\nsmall chance of a race otherwise, where the workqueues are\nscheduled after they have been cancelled but before interrupts\nare disabled.\n\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "d5e63af8efd52fa816bc9820e10dfd640770976c", "tree": "33f665a03f3cf0c9b6915ea173ad61717f0fb058", "parents": [ "e5370b8afa733c1e47f71bd244bf61950437e715" ], "author": { "name": "Karthikeyan Ramasubramanian", "email": "kramasub@codeaurora.org", "time": "Fri Jul 29 11:30:59 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:21 2011 -0700" }, "message": "msm: smd_tty: smd_tty_open to wait until SMD channel is fully open\n\nsmd_tty_open waits with timeout for SMD channel to be fully open\nbefore returning.\n\nCRs-Fixed: 296382\nSigned-off-by: Karthikeyan Ramasubramanian \u003ckramasub@codeaurora.org\u003e\n" }, { "commit": "e5370b8afa733c1e47f71bd244bf61950437e715", "tree": "079b799a61a98713881b7bc2dccb74af38dba239", "parents": [ "5d41837ac192f0545416b7c0510f4769fc5c04ed" ], "author": { "name": "Yaniv Gardi", "email": "ygardi@codeaurora.org", "time": "Wed Jul 27 11:46:51 2011 +0300" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:20 2011 -0700" }, "message": "msm: sdio: increase sdio al block size to 256\n\nThis will improve SDIO throughput in ~10Mbps\n\nSigned-off-by: Yaniv Gardi \u003cygardi@codeaurora.org\u003e\n" }, { "commit": "5d41837ac192f0545416b7c0510f4769fc5c04ed", "tree": "cf811b3563989763649f5b76404084c73185bfa9", "parents": [ "38014983c528d39e0b7145b81d54b32ad98480b4" ], "author": { "name": "Mansoor Aftab", "email": "maftab@codeaurora.org", "time": "Tue Jul 26 17:01:26 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:20 2011 -0700" }, "message": "msm: camera: Changes to enable events and Auto Focus\n\nAdded event notify message support added entries for\nautofocus event types\n\nSigned-off-by: Mansoor Aftab \u003cmaftab@codeaurora.org\u003e\n" }, { "commit": "38014983c528d39e0b7145b81d54b32ad98480b4", "tree": "040e31617bb1f6e61e6dff9926846b9d11dc829a", "parents": [ "b3d857c8d9ca154e008107f8ba41853e920eb21b" ], "author": { "name": "Nagamalleswararao Ganji", "email": "nganji@codeaurora.org", "time": "Wed Jul 20 20:14:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:19 2011 -0700" }, "message": "defconfig: msm8960: back light control support\n\nadds the back light control support for 8960\n\nSigned-off-by: Nagamalleswararao Ganji \u003cnganji@codeaurora.org\u003e\n" }, { "commit": "b3d857c8d9ca154e008107f8ba41853e920eb21b", "tree": "0b50fbf7a838bdd086c959bcc9926b6f1401c8f2", "parents": [ "24fb7f82a44ed2afcec9a91d1c8c3984ab62c328" ], "author": { "name": "Praveen Chidambaram", "email": "pchidamb@codeaurora.org", "time": "Tue May 31 16:28:07 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:18 2011 -0700" }, "message": "msm: devices-8960: Update wakeup irqs for MSM8960\n\nSigned-off-by: Praveen Chidambaram \u003cpchidamb@codeaurora.org\u003e\n" }, { "commit": "24fb7f82a44ed2afcec9a91d1c8c3984ab62c328", "tree": "aee87b9a53f63fd44056b96dfdabc33e79edceb5", "parents": [ "88edea9413aa7fad0006c37fc771296db6fa6c90" ], "author": { "name": "Subhash Jadavani", "email": "subhashj@codeaurora.org", "time": "Mon Jul 25 15:54:34 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:18 2011 -0700" }, "message": "mmc: msm_sdcc: set RX_DATA_PEND bit during card read operation\n\nLatest revision of SDCC4 controller have added RX_DATA_PEND bit under\nMCI_DATA_CTL register. If this bit is set (1), data timeout counter\nwill start counting only after the Read command (with data) was sent\ninstead of counting from initialization of DPSM.\n\nThis patch sets this new control bit to 1 for card read operation.\nAs prior versions of SDCC controllers had this new bit as reserved bit,\nwe don\u0027t need any extra version check while using this bit. Which means\nsetting this bit in prior version of SDCC controllers will not have\nany effect.\n\nSigned-off-by: Subhash Jadavani \u003csubhashj@codeaurora.org\u003e\n" }, { "commit": "88edea9413aa7fad0006c37fc771296db6fa6c90", "tree": "27386d43c5deef2fde41a878c94e7b9d0a1ce328", "parents": [ "08e5040561f90456861da0a2a350ba2b31ccc4d8" ], "author": { "name": "Matt Wagantall", "email": "mattw@codeaurora.org", "time": "Thu Jul 21 10:29:56 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:17 2011 -0700" }, "message": "msm: footswitch-8x60: Detect footswitch state at boot\n\nIf a footswitch is already enabled according to its register,\na call to enable it should return early and not touch the clocks\nor resets associated with the core. Otherwise, the first call to\nenable the footswitch at boot will reset the core\u0027s state.\n\nThis modification allows for smooth hand-offs of core control\nfrom the bootloaders to Linux so that, for example, an image\ndisplayed by the MDP core can be made to persist across the\nkernel display driver\u0027s call to enable the footswitch.\n\nSigned-off-by: Matt Wagantall \u003cmattw@codeaurora.org\u003e\n" }, { "commit": "08e5040561f90456861da0a2a350ba2b31ccc4d8", "tree": "d800ea28046122f26111317512efeef02c49b3b3", "parents": [ "9c430e3b366ebf3ae0b3d17132f77e08837f7312" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Thu Jul 28 10:13:15 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:17 2011 -0700" }, "message": "defconfig: 8960: Enable PRNG hardware driver\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "9c430e3b366ebf3ae0b3d17132f77e08837f7312", "tree": "6ad88b37c636665af26f6667361ea5222c2eaffc", "parents": [ "d2a3bb5f5bfc7ddf779a78accfc8dc5f295a0bf3" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Wed Jul 27 11:04:47 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:16 2011 -0700" }, "message": "msm: devices_msm8960: Add PRNG device\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "d2a3bb5f5bfc7ddf779a78accfc8dc5f295a0bf3", "tree": "be3f319e3f4c825eb45cb0cb743277e4150c40ce", "parents": [ "f7f58232ab8e05180e40e68c9e6ef0cec7a0ce9d" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Thu Jul 21 12:39:22 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:15 2011 -0700" }, "message": "msm: charm: Wakeup charm when shutting down\n\nWhen calling the shutdown routine, it is necessary to wake\nup the 9k before setting AP2MDM_STATUS. This guarantees the\n9k will be able to respond to the status change\n\nCRs-Fixed: 295639\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "f7f58232ab8e05180e40e68c9e6ef0cec7a0ce9d", "tree": "be25303aa032e5e542fe4c53bda2501ee4167892", "parents": [ "5a62c4c4bf31d2f793a95e81394ac6c4a0731b76" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Tue Jul 26 14:18:30 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:15 2011 -0700" }, "message": "msm: camera: Configure and update linearization look up tables\n\nSupport for configure and update commands for\nlinearization for vfe3.2\n\nSigned-off-by: Lakshmi Narayana Kalavala \u003clkalaval@codeaurora.org\u003e\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "5a62c4c4bf31d2f793a95e81394ac6c4a0731b76", "tree": "b062f5ff9a9cd86eb686618e90973a94bbcdf0a1", "parents": [ "7b79aaed3687d5446f27ef128c8387cdbc56e5d7" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Fri Jul 15 13:41:14 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:14 2011 -0700" }, "message": "msm: clock-8960: Remove unnecessary setup\n\nThese registers are already setup appropriately by the\nbootloader. Remove the useless writes.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "7b79aaed3687d5446f27ef128c8387cdbc56e5d7", "tree": "e55b428d88419b57c5aabeb87684d9dfc2786457", "parents": [ "ba1706d11ddc652805ff5eb401764de5f023d19c" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Wed Jul 13 14:04:58 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:13 2011 -0700" }, "message": "msm: Simplify subsystem ids\n\nMost contexts related to a subsystem (e.g. camera, display)\nwill all share the same domain. Get rid of all the extra subsystem\nids which just create confusion.\n\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "ba1706d11ddc652805ff5eb401764de5f023d19c", "tree": "00501a261ffe212df85547b1bf5d1a34d1d756ac", "parents": [ "5eeca528c77ae1fcc2dc7d970b44cf36e2988c41" ], "author": { "name": "Patrick Lai", "email": "plai@codeaurora.org", "time": "Mon Jul 25 17:02:19 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:13 2011 -0700" }, "message": "mfd: wcd9310: select SLIMBUS automatically\n\nCompilation fails if SLIMBUS Kconfig is not enabled\nwhen MSM8960 ALSA sound card is enabled.\n\nCRs-Fixed: 293006\nSigned-off-by: Patrick Lai \u003cplai@codeaurora.org\u003e\n" }, { "commit": "5eeca528c77ae1fcc2dc7d970b44cf36e2988c41", "tree": "4339ad900d7c4d603c1dd14ef6b1220d66819c8b", "parents": [ "087c60b990f98eda2a14f61e90b6df49aab6c618" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Jul 15 17:05:36 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:12 2011 -0700" }, "message": "rmnet: Accept packets larger than MTU\n\nThe initial Android RmNET device driver had a validation filter on\nreceive packets to ensure size did not exceed link MTU (1514\noriginally). This assumed the link was symmetrical, such that\nmaximum transmit and receive transmission unit (MTU/MRU) were the\nsame. Over time, the symmetrical link assumption has been proven\nincorrect, leading to cases where valid packets are dropped.\n\nRemove the RX packet size validation filter such that packets\nlarger then configured MTU will be passed up the data stack. This\nstrategy change is permitted under the kernel documentation.\nReference: kernel/Documentation/networking/netdevices.txt\n\nCRs-Fixed: 290151\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\nAcked-by: Andrew Richardson \u003crandrew@qualcomm.com\u003e\n" }, { "commit": "087c60b990f98eda2a14f61e90b6df49aab6c618", "tree": "2a53b95e8f304f3b0a8e1049424853b199b42b19", "parents": [ "abb750b4929ecfbf2eb6a9e75e575f7417f1c73f" ], "author": { "name": "Mona Hossain", "email": "mhossain@codeaurora.org", "time": "Wed Jul 20 10:34:57 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:12 2011 -0700" }, "message": "crypto: Set a unique handle when opening qce device\n\n- Define a new handle data structure \"qcedev_handle\"\n This structures holds internal context data\n \"qcedev_sha_ctxt\" and pointer to \"qcedev_control\"\n- Allocate memory for the hanlde, each time a client\n opens the device. Thereby, ensuring a unique handle\n for each client.\n- Use the new handle for each operation (instead of\n qcedev_control pointer)\n- Remove the internal sha context data structure\n \"qcedev_sha_ctx\" from the \"qcedev_sha_op_req\".\n This is now correctly tied to each handle.\n\nSigned-off-by: Mona Hossain \u003cmhossain@codeaurora.org\u003e\n" }, { "commit": "abb750b4929ecfbf2eb6a9e75e575f7417f1c73f", "tree": "6b20c74f6e10cf5330cb823c3eadb6999d2e8069", "parents": [ "b91fa71c588a9785f639193c49295b88031971d7" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Wed Jul 13 16:47:18 2011 +0530" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:11 2011 -0700" }, "message": "msm: acpuclock: Match 7x27a AXI freq. with 7x27 for CDMA only plan\n\n7x27a axi freq. should match with the 7x27 CDMA only plan\nin order to match up with power numbers.\n\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "b91fa71c588a9785f639193c49295b88031971d7", "tree": "f6e61f214b9d8ce689c94c0bc6c14acaa95f4898", "parents": [ "98a7ecb14c4291bc55b692bc294cee8cc5dbb5aa" ], "author": { "name": "Manoj Rao", "email": "manojraj@codeaurora.org", "time": "Wed Jun 29 09:07:55 2011 -0700" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:10 2011 -0700" }, "message": "msm: display: HDMI: VG2 pipe solid fill color causes MDP to hang\n\nDuring 3D video playback both VG pipes are used, solid color\nfill into VG2 pipe for HDCP compliance purpose causes MDP to hang\ninstead, we enable Encryption on HDMI TMDS Output\nBy setting BIT[2] of HDMI_CTRL register to enable encryption on\nHDMI TMDS Output.\n\nSigned-off-by: Manoj Rao \u003cmanojraj@codeaurora.org\u003e\n" }, { "commit": "98a7ecb14c4291bc55b692bc294cee8cc5dbb5aa", "tree": "80d1c2e7ed4d40c17173896c54e8ac73926e3acc", "parents": [ "930bf7bfd7b754bf2d464c7574a02016104f2cb4" ], "author": { "name": "Sagar Dharia", "email": "sdharia@codeaurora.org", "time": "Mon Jul 25 15:25:35 2011 -0600" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Mon Oct 03 10:27:10 2011 -0700" }, "message": "slimbus: Support ability to specify maximum and minimum clock gears\n\nSlimbus can run in clock gears 1 through 10 per spec. Scheduling\nalgorithm tries to find the optimum clock gear depending on bandwidth\nusage for messaging and active data channels.\nHowever, not all controllers may have the ability to support all the\n10 clock gears. This patch provides ability so that scheduling\nalgorithm will only run the bus in supported slimbus clock gear.\nControllers can specify supported minimum and maximum clock gear\nduring registration with the framework.\n\nSigned-off-by: Sagar Dharia \u003csdharia@codeaurora.org\u003e\n" } ], "next": "930bf7bfd7b754bf2d464c7574a02016104f2cb4" }