)]}' { "log": [ { "commit": "4728d546d7137ad5350cc2e53d4748fd26f61a60", "tree": "73cd688f1f16b1d04a23958e7110ba3f70def531", "parents": [ "46cedc9b773795b6190c31e5d32de5207b55a356" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:46 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Wed May 16 00:51:46 2007 +0200" }, "message": "ide: remove ide_dma_enable()\n\n* check -\u003espeedproc return value in ide_tune_dma()\n* use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers\n* remove no longer needed ide_dma_enable()\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7f8f48af0861c38c28d4abd550102643e0ea9e6a", "tree": "6ec47ace87afbd96cc1144d423854b09d9f21d75", "parents": [ "7662d046df09e80680b77b68de896beab45e675e" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:10 2007 +0200" }, "message": "ide: cable detection fixes (take 2)\n\nTejun\u0027s recent eighty_ninty_three() fix has inspired me to do more thorough\nreview of the cable detection code...\n\n* print user-friendly warning about limiting the maximum transfer speed\n to UDMA33 (and the reason behind it) when 80-wire cable is not detected,\n also while at it cleanup eighty_ninty_three() a bit\n\n* use eighty_ninty_three() in ide_ata66_check(), this actually fixes 3 bugs:\n - bit 14 (word 93 validity check) \u003d\u003d 1 \u0026\u0026 bit 13 (80-wire cable test) \u003d\u003d 1\n were used as 80-wire cable present test for CONFIG_IDEDMA_IVB\u003dn case\n (please see FIXME comment in eighty_ninty_three() for more details)\n - CONFIG_IDEDMA_IVB\u003dy/n cases were interchanged\n - check for SATA devices was missing\n\n* remove private cable warnings from pdc_202xx{old,new} drivers now that core\n code provides this functionality (plus, in pdc202xx_new case the test could\n give false warnings for ATAPI devices because pdc202xx_new driver doesn\u0027t\n even support ATAPI DMA)\n\nCc: Tejun Heo \u003chtejun@gmail.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "2d5eaa6dd744a641e75503232a01f52d0768884c", "tree": "0736bd00ea3bd032d601d0a676c998cb043b877a", "parents": [ "18137207236285989dfc0ee7f929b954199228f3" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Thu May 10 00:01:08 2007 +0200" }, "message": "ide: rework the code for selecting the best DMA transfer mode (v3)\n\nDepends on the \"ide: fix UDMA/MWDMA/SWDMA masks\" patch.\n\n* add ide_hwif_t.udma_filter hook for filtering UDMA mask\n (use it in alim15x3, hpt366, siimage and serverworks drivers)\n* add ide_max_dma_mode() for finding best DMA mode for the device\n (loosely based on some older libata-core.c code)\n* convert ide_dma_speed() users to use ide_max_dma_mode()\n* make ide_rate_filter() take \"ide_drive_t *drive\" as an argument instead\n of \"u8 mode\" and teach it to how to use UDMA mask to do filtering\n* use ide_rate_filter() in hpt366 driver\n* remove no longer needed ide_dma_speed() and *_ratemask()\n* unexport eighty_ninty_three()\n\nv2:\n* rename -\u003efilter_udma_mask to -\u003eudma_filter\n [ Suggested by Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e. ]\n\nv3:\n* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space\n originated transfer mode change requests when 100MHz clock is used)\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "81d368e0e2591497106b2543918c79dd6d78277b", "tree": "7c0977499403ca7cc21ae70760399642abef9e2d", "parents": [ "07af427606667c304a2e965cd51d2c03642e8cae" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Sat Mar 03 17:48:53 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Mar 03 17:48:53 2007 +0100" }, "message": "ide: ide_get_best_pio_mode() returns incorrect IORDY setting (take 2)\n\nThe function ide_get_best_pio_mode() fails to return the correct IORDY setting\nfor the explicitly specified modes -- fix this along with the heading comment,\nand also remove the long commented out code.\n\nAlso, while at it, correct the misliading comment about the PIO cycle time in\n\u003clinux/ide.h\u003e -- it actually consists of only the active and recovery periods,\nwith only some chips also including the address setup time into equation...\n\n[ bart: sl82c105 seems to be currently the only driver affected by this fix ]\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n" }, { "commit": "7569e8dc2213ecc47024ea5edbadc8736487d926", "tree": "44c47e85b5e87c75972c077da31f198c4f597688", "parents": [ "056a697b7388844a1341e92e277bff8e5bf61ec9" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:25 2007 +0100" }, "message": "ide: add ide_use_fast_pio() helper (v3)\n\n* add ide_use_fast_pio() helper for use by host drivers\n\n* add DMA capability and hwif-\u003eautodma checks to ide_use_dma()\n\n - au1xxx-ide/it8213/it821x drivers didn\u0027t check for (id-\u003ecapability \u0026 1)\n\n [ for the IT8211/2 in SMART mode this check shouldn\u0027t be made but since\n in it821x_fixups() we set DMA bit explicitly:\n\n if(strstr(id-\u003emodel, \"Integrated Technology Express\")) {\n /* In raid mode the ident block is slightly buggy\n We need to set the bits so that the IDE layer knows\n LBA28. LBA48 and DMA ar valid */\n id-\u003ecapability |\u003d 3; /* LBA28, DMA */\n\n we are better off using generic helper if we can ]\n\n - ide-cris driver didn\u0027t set -\u003eautodma\n\n [ before the patch hwif-\u003eautodma was only checked in the chipset specific\n hwif-\u003eide_dma_check implementations, for ide-cris it is cris_dma_check()\n function so there no behavior change here ]\n\nv2:\n* updated patch description (thanks to Alan Cox for the feedback)\n\nv3:\n* updated for scc_pata driver\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "056a697b7388844a1341e92e277bff8e5bf61ec9", "tree": "b548accd5b90d95e9d774ce6a253164808d527a9", "parents": [ "c94964a4555eb58be3f45edf2b63a2b3f549ef29" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: unexport ide_set_xfer_rate() (v2)\n\nIn cmd64x, siimage and scc_pata drivers:\n* don\u0027t set drive-\u003einit_speed as it should be already\n set by successful execution of ide_set_xfer_rate()\n* use hwif-\u003espeedproc functions directly\n\nAbove changes allows removal of EXPORT_SYMBOL_GPL(ide_set_xfer_rate).\n\nv2:\n* updated for scc_pata driver\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "6679054895f9b1dc676d14637306b297451f1ac0", "tree": "cde79b99e193a8508ff5faa33f23e1152fb9bb34", "parents": [ "ac4a306537b97fcae5da96bedcf521f6dfdf9753" ], "author": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Sat Feb 17 02:40:24 2007 +0100" }, "message": "ide: remove write-only ide_pio_data_t.blacklisted\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e\n\n" }, { "commit": "0750508ae6479d4ac6154b35c5b82929f31efb03", "tree": "28df59ad1701c407ecdd3b08295093dffc678eb2", "parents": [ "83d7dbc4095a0c314b191c573be5fb4fa6ce0897" ], "author": { "name": "Sergei Shtylyov", "email": "sshtylyov@ru.mvista.com", "time": "Tue Oct 03 01:14:17 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Tue Oct 03 08:04:07 2006 -0700" }, "message": "[PATCH] ide_dma_speed() fixes\n\nide_dma_speed() fails to actually honor the IDE drivers\u0027 mode support\nmasks) because of the bogus checks -- thus, selecting the DMA transfer mode\nthat the driver explicitly refuses to support is possible. Additionally,\nthere is no check for validity of the UltraDMA mode data in the drive ID,\nand the function is misdocumented.\n\nSigned-off-by: Sergei Shtylyov \u003csshtylyov@ru.mvista.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "4aff5e2333c9a1609662f2091f55c3f6fffdad36", "tree": "b73d8c2b7c1bdc03d3313c108da7dfc95ee95525", "parents": [ "77ed74da26f50fa28471571ee7a2251b77526d84" ], "author": { "name": "Jens Axboe", "email": "axboe@suse.de", "time": "Thu Aug 10 08:44:47 2006 +0200" }, "committer": { "name": "Jens Axboe", "email": "axboe@nelson.home.kernel.dk", "time": "Sat Sep 30 20:23:37 2006 +0200" }, "message": "[PATCH] Split struct request -\u003eflags into two parts\n\nRight now -\u003eflags is a bit of a mess: some are request types, and\nothers are just modifiers. Clean this up by splitting it into\n-\u003ecmd_type and -\u003ecmd_flags. This allows introduction of generic\nLinux block message types, useful for sending generic Linux commands\nto block devices.\n\nSigned-off-by: Jens Axboe \u003caxboe@suse.de\u003e\n" }, { "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7", "tree": "6d98881fe91fd9583c109208d5c27131b93fa248", "parents": [ "e02169b682bc448ccdc819dc8639ed34a23cedd8" ], "author": { "name": "Jörn Engel", "email": "joern@wohnheim.fh-wedel.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "committer": { "name": "Adrian Bunk", "email": "bunk@stusta.de", "time": "Fri Jun 30 19:25:36 2006 +0200" }, "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n" }, { "commit": "3d1c1cc962cebaae6a70fd89a0adb29ad10a2a12", "tree": "aff0c6a073d42abe8ff80f1aed98c9b01c0eced7", "parents": [ "8b6ebe016bf68fc9b3f3f2ce79c1918b0808481c" ], "author": { "name": "Ingo Molnar", "email": "mingo@elte.hu", "time": "Mon Jun 26 00:26:17 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Mon Jun 26 09:58:28 2006 -0700" }, "message": "[PATCH] fix IDE deadlock in error reporting code\n\nMichal Piotrowski reported the following validator assert:\n\n hdd: set_drive_speed_status: status\u003d0x51 { DriveReady SeekComplete Error }\n hdd: set_drive_speed_status: error\u003d0xb4 { AbortedCommand LastFailedSense\u003d0x0b }\n\n \u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\n [ BUG: illegal lock usage! ]\n ----------------------------\n illegal {in-hardirq-W} -\u003e {hardirq-on-W} usage.\n hdparm/1821 [HC0[0]:SC0[0]:HE1:SE1] takes:\n (ide_lock){++..}, at: [\u003cc0268388\u003e] ide_dump_opcode+0x13/0x9b\n\n [...]\n\n stack backtrace:\n [\u003cc0104513\u003e] show_trace+0x1b/0x20\n [\u003cc01045f1\u003e] dump_stack+0x1f/0x24\n [\u003cc013976c\u003e] print_usage_bug+0x1a5/0x1b1\n [\u003cc0139e90\u003e] mark_lock+0x2ca/0x4f7\n [\u003cc013aa96\u003e] __lockdep_acquire+0x47e/0xaa4\n [\u003cc013b536\u003e] lockdep_acquire+0x67/0x7f\n [\u003cc030552d\u003e] _spin_lock+0x24/0x32\n [\u003cc0268388\u003e] ide_dump_opcode+0x13/0x9b\n [\u003cc02688b6\u003e] ide_dump_status+0x4a6/0x4cc\n [\u003cc0267ae6\u003e] ide_config_drive_speed+0x32a/0x33a\n [\u003cc0262dc5\u003e] piix_tune_chipset+0x2ed/0x2f8\n [\u003cc0262e31\u003e] piix_config_drive_xfer_rate+0x61/0xb5\n [\u003cc0263a82\u003e] set_using_dma+0x2f/0x60\n [\u003cc0263bee\u003e] ide_write_setting+0x4a/0xc3\n [\u003cc02647ca\u003e] generic_ide_ioctl+0x8a/0x47f\n [\u003cf886003a\u003e] idecd_ioctl+0xfd/0x133 [ide_cd]\n [\u003cc01f1fff\u003e] blkdev_driver_ioctl+0x4b/0x5f\n [\u003cc01f2783\u003e] blkdev_ioctl+0x770/0x7bd\n [\u003cc017dc0d\u003e] block_ioctl+0x1f/0x21\n [\u003cc0189353\u003e] do_ioctl+0x27/0x6e\n [\u003cc0189604\u003e] vfs_ioctl+0x26a/0x280\n [\u003cc0189667\u003e] sys_ioctl+0x4d/0x7e\n [\u003cc0305ed2\u003e] sysenter_past_esp+0x63/0xa1\n\nin ide_dump_opcode() takes the ide_lock in an irq-unsafe manner, i.e. this\nfunction expects to be called with irqs disabled. But\nide_dump_ata[pi]_status() doesnt do that - it enables interrupts specifically.\n That is a no-no - what guarantees that another IDE port couldnt generate an\nIDE interrupt while we are dumping this error? The fix is to turn the\nirq-enabling in these functions into irq-disabling.\n\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Michal Piotrowski \u003cmichal.k.k.piotrowski@gmail.com\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "125e18745f16685f69a34fd6130d47598fc4bf54", "tree": "c97ed94b0525a572efa1bd4990a55b18be5d781d", "parents": [ "78ce89c92bc6eaf5933b5664bff64253a7103bd7" ], "author": { "name": "Eric Sesterhenn", "email": "snakebyte@gmx.de", "time": "Fri Jun 23 02:06:06 2006 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@g5.osdl.org", "time": "Fri Jun 23 07:43:08 2006 -0700" }, "message": "[PATCH] More BUG_ON conversion\n\nSigned-off-by: Eric Sesterhenn \u003csnakebyte@gmx.de\u003e\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nCc: Bartlomiej Zolnierkiewicz \u003cB.Zolnierkiewicz@elka.pw.edu.pl\u003e\nCc: Alan Cox \u003calan@lxorguk.ukuu.org.uk\u003e\nCc: James Bottomley \u003cJames.Bottomley@steeleye.com\u003e\nAcked-by: \"Salyzyn, Mark\" \u003cmark_salyzyn@adaptec.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n" }, { "commit": "6593178dd46d64a5bcb0402a4f3acd95b0687abd", "tree": "39ffacfb83efc7cbd941dc915ff00e396b371d7b", "parents": [ "c37ea218cb43c67bf1578f5e535fcc3a751018ef" ], "author": { "name": "James Bottomley", "email": "jejb@parisc-linux.org", "time": "Fri Nov 18 23:13:33 2005 +0100" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@gmail.com", "time": "Fri Nov 18 23:13:33 2005 +0100" }, "message": "[PATCH] ide: fix ide_toggle_bounce() to not try to bounce if we have an IOMMU\n\nThe following patch fixes a crash caused by attempting to bounce buffer\nwhen an IDE CD-ROM is used on a machine with an IO-MMU. [At least, this\npatch fixes things so I can use my IDE CD-ROM behind an ns87415 on a \nHP PA-RISC workstation.]\n\nSigned-off-by: James Bottomley \u003cjejb@parisc-linux.org\u003e\nSigned-off-by: Kyle McMartin \u003ckyle@parisc-linux.org\u003e\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@gmail.com\u003e" }, { "commit": "13bbbf28fb914da6707aad44a073651f5c9d13a5", "tree": "16cea5674a7da7aa1b318685598a87d7dc806ba1", "parents": [ "f3718d3e135117f80de0ff219be91544baa75599" ], "author": { "name": "Denis Vlasenko", "email": "vda@ilport.com.ua", "time": "Sun Jul 03 17:09:13 2005 +0200" }, "committer": { "name": "Bartlomiej Zolnierkiewicz", "email": "bzolnier@elka.pw.edu.pl", "time": "Sun Jul 03 17:09:13 2005 +0200" }, "message": "[PATCH] ide: fix line break in ide messages\n\nFrom: Denis Vlasenko \u003cvda@ilport.com.ua\u003e\n\n* printk(\"\\n\") is misplaced, resulting in stray empty line in kernel log\n* cleanups nerby: some back-to-back printks are combined, etc\n\nSigned-off-by: Bartlomiej Zolnierkiewicz \u003cbzolnier@elka.pw.edu.pl\u003e" }, { "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2", "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d", "parents": [], "author": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@ppc970.osdl.org", "time": "Sat Apr 16 15:20:36 2005 -0700" }, "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n" } ] }