)]}' { "log": [ { "commit": "f066380a08b607022e057034e9918bf73cb25785", "tree": "a569b92189c4f45c661c0deeacf15348b2d34b59", "parents": [ "fa002621c590c56e13cd86e944919a5771a6e03e", "46b442cc55bde917d677d8d8cfe89340311ae46c" ], "author": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Thu Jun 07 11:14:52 2012 -0700" }, "committer": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Thu Jun 07 11:14:52 2012 -0700" }, "message": "Merge commit \u0027AU_LINUX_ANDROID_ICS.04.00.04.00.130\u0027 into msm-3.4\n\n* commit \u0027AU_LINUX_ANDROID_ICS.04.00.04.00.130\u0027: (39 commits)\n msm: vidc: Add support for DIVX 4/5/6\n msm_fb: display: Set the minimal sleep time for DSI PHY Initialisation\n board: 8930: add debounce interval for gpio-keys\n regulator: Extend of_get_regulator_init_data to support non-DT consumers\n regulator: pm8xxx-regulator: Add slew_rate platform data parameter\n crypto: Fix initialization of array variable.\n arm: free all .init memory when CONFIG_STRICT_MEMORY_RWX is set\n msm: clock-copper: Remove block reset ability from most clocks\n msm: clock-local2: Fix local_vote_clk_reset to use right to_*_clk macro\n EHCI: HSIC: Add support for suspend, resume and URB logging\n arm/dt: msm-pm8941: Change boost regulator register address to 0xA000\n msm: camera: Move server code into seperate file.\n msm: camera: Close camera gracefully in case of userspace crash\n media: dvb: mpq: Support getting decoder\u0027s buffer status\n Bluetooth: Wait for wcnss to be ready after SSR\n msm: msm_sdcc: Add device tree support for SDCC controllers\n msm: display: Change DSI escape clock to byte clock\n msm: clock-8960: Change source of DSI escape clock to byte clock\n ASOC: msm: Enable mpq8064 machine driver.\n EHCI: HSIC: Set the interrupt threshold control value to 8ms\n ...\n\nSigned-off-by: Steve Muckle \u003csmuckle@codeaurora.org\u003e\n" }, { "commit": "4f31daed983f44cafead50495be69ba74c878776", "tree": "32461fc182ae974cf33256a1452c74bb1a23fe30", "parents": [ "008ee8b186bc850006bfbee2b146a68e09b09544", "7c81518dcab881ec50ea811b6968a3031974e8fa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Jun 07 00:52:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Jun 07 00:52:26 2012 -0700" }, "message": "Merge \"msm: Seperate VFE/AXI register programming from start and stop func.\" into msm-3.0" }, { "commit": "f132c6cf77251e011e1dad0ec88c0b1fda16d5aa", "tree": "f04b469a3547a19b7bdbe110adc571eb71c93328", "parents": [ "23016defd7db701a01dc49f972ad6b1bae9651c2", "3f6240f3e4e2608caf1a70d614ada658cbcbe7be" ], "author": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Wed Jun 06 18:30:57 2012 -0700" }, "committer": { "name": "Steve Muckle", "email": "smuckle@codeaurora.org", "time": "Wed Jun 06 18:45:28 2012 -0700" }, "message": "Merge commit \u0027AU_LINUX_ANDROID_ICS.04.00.04.00.126\u0027 into msm-3.4\n\nAU_LINUX_ANDROID_ICS.04.00.04.00.126 from msm-3.0.\nFirst parent is from google/android-3.4.\n\n* commit \u0027AU_LINUX_ANDROID_ICS.04.00.04.00.126\u0027: (8712 commits)\n PRNG: Device tree entry for qrng device.\n vidc:1080p: Set video core timeout value for Thumbnail mode\n msm: sps: improve the debugging support in SPS driver\n board-8064 msm: Overlap secure and non secure video firmware heaps.\n msm: clock: Add handoff ops for 7x30 and copper XO clocks\n msm_fb: display: Wait for external vsync before DTV IOMMU unmap\n msm: Fix ciruclar dependency in debug UART settings\n msm: gdsc: Add GDSC regulator driver for msm-copper\n defconfig: Enable Mobicore Driver.\n mobicore: Add mobicore driver.\n mobicore: rename variable to lower case.\n mobicore: rename folder.\n mobicore: add makefiles\n mobicore: initial import of kernel driver\n ASoC: msm: Add SLIMBUS_2_RX CPU DAI\n board-8064-gpio: Update FUNC for EPM SPI CS\n msm_fb: display: Remove chicken bit config during video playback\n mmc: msm_sdcc: enable the sanitize capability\n msm-fb: display: lm2 writeback support on mpq platfroms\n msm_fb: display: Disable LVDS phy \u0026 pll during panel off\n ...\n\nSigned-off-by: Steve Muckle \u003csmuckle@codeaurora.org\u003e\n" }, { "commit": "7c81518dcab881ec50ea811b6968a3031974e8fa", "tree": "6ba10dc5485c9068395bafde50a888422b95a761", "parents": [ "36dfbd85692744de74d981d886668b788315e879" ], "author": { "name": "Azam Sadiq Pasha Kapatrala Syed", "email": "akapatra@codeaurora.org", "time": "Thu May 31 19:28:09 2012 -0700" }, "committer": { "name": "Azam Sadiq Pasha Kapatrala Syed", "email": "akapatra@codeaurora.org", "time": "Tue Jun 05 12:18:30 2012 -0700" }, "message": "msm: Seperate VFE/AXI register programming from start and stop func.\n\nDecouple AXI and VFE. This will help to control/program VFE and AXI\nindependently.\n\nChange-Id: Ic892f1ebe1ce0ac29bd95f0852a74de6cfbabcc5\nSigned-off-by: Azam Sadiq Pasha Kapatrala Syed \u003cakapatra@codeaurora.org\u003e\n" }, { "commit": "9838e487e30436782d8ff0a2748499effc96793d", "tree": "2ceffca606b66e83dc3aeb7cb48193aaf5c24924", "parents": [ "d2df8aeefc254d47bebec34838af781e1f8047a6", "c1e6a95c31cc474f809bb7ab3c036e8890be7709" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jun 01 19:09:11 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jun 01 19:09:11 2012 -0700" }, "message": "Merge \"radio: iris: Add calibration mode\" into msm-3.0" }, { "commit": "5b1e6f1afb70ace03b32b48d4d70f34302decdc2", "tree": "2325d95d96bfa67f0b49e80aada80ceb4366239d", "parents": [ "bf54a4dcfa3c1bb8491581c06a564e3b4824a81b" ], "author": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon May 28 08:13:55 2012 -0700" }, "committer": { "name": "Laura Abbott", "email": "lauraa@codeaurora.org", "time": "Mon May 28 08:13:55 2012 -0700" }, "message": "msm: camera: Remove subsystem_map header\n\nThe old subsystem_map APIs are being deprecated. The\nmsm_subsystem_map.h header file used to have definitions for\niommu domains. Remove this header file and include iommu_domains.h\nto get the necessary iommu definitions.\n\nChange-Id: I417a357789a8fea16bbadd98663a8ebe873ff4e7\nSigned-off-by: Laura Abbott \u003clauraa@codeaurora.org\u003e\n" }, { "commit": "c1e6a95c31cc474f809bb7ab3c036e8890be7709", "tree": "2f074b47e3ad5679d5aaca71c4af1b8fff76048b", "parents": [ "2bcbac544862c90705395939f2516b6c78267b16" ], "author": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Tue May 15 19:29:54 2012 +0530" }, "committer": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Mon May 28 19:00:49 2012 +0530" }, "message": "radio: iris: Add calibration mode\n\nDo not queue the FM enabled/disabled events\nwhile calibration is in progress\n\nCRs-Fixed: 358229\nSigned-off-by: Ayaz Ahmad \u003caahmad@codeaurora.org\u003e\nChange-Id: I02ee9c095d9d242de0610b210ae4e5d328e0afa8\n" }, { "commit": "aeb793ea48f0958b0aafac76c3fe774862f4dc69", "tree": "ad2d6ce3e6c70e1314eece0df94fa962cafc53b4", "parents": [ "c3f3b0321016480b66def830deff50cc21a67910" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Fri May 11 11:41:16 2012 -0400" }, "committer": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Thu May 24 19:41:49 2012 -0400" }, "message": "msm: mpq8064: Add Video processing driver block for VCAP\n\nAdding VP portion to MSM VCAP. VP is used for deinterlacing video.\n\nChange-Id: I888e841cf4d65cf1e5b0316db16923c914469235\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "7d5bfbc69248f59e4889372e536d310ccfeb49a3", "tree": "1eb54439c67fb38e03e22614678672964d70fdaa", "parents": [ "8fdc003824c7e052a4da6fac71c1074b5edb18b9" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Tue May 08 13:33:48 2012 -0400" }, "committer": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Wed May 23 10:55:30 2012 -0400" }, "message": "msm: mpq8064: Client passes timing information to VCAP\n\nThis will allow the VCAP driver to be more dynamic and will allow\nfor the timing table to be removed from the Video Capture\n\nChange-Id: Ib631104cc2c45adf429b6a6ca90415c191e24566\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "f2acb8593e9b17c69a4c33dd280ecd7edee3dbea", "tree": "8ab88d20b860acbd668aceff04acf68e9444da9d", "parents": [ "5b79a3252710683b406c03ab21a808e852cb2962" ], "author": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Mon May 07 17:44:53 2012 -0700" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Mon May 21 18:08:38 2012 -0700" }, "message": "msm: vidc: Adds support for port reconfiguration.\n\nAdds support for port reconfiguration. This enables decoder to\nreconfigure to new resolution or settings other than initially\nconfigured to continue video playback.\n\nChange-Id: Id11e973e4cf1a5c7e4ec5544215fe57cb19466be\nSigned-off-by: Praneeth Paladugu \u003cppaladug@codeaurora.org\u003e\n" }, { "commit": "5b79a3252710683b406c03ab21a808e852cb2962", "tree": "2931306c360e3938b8687740c11db0a60b85d06e", "parents": [ "b8a846f11928fe6308dddfae0cb7dc8e9e2d7ae2" ], "author": { "name": "Praneeth Paladugu", "email": "ppaladug@codeaurora.org", "time": "Wed Apr 18 15:16:29 2012 -0700" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Mon May 21 17:50:45 2012 -0700" }, "message": "msm: vidc: Adds support for conveying events.\n\nAdds support for conveying events to userspace from kernel\ndriver. This is needed to let userspace/client know of\nany error or other event of importance.\n\nChange-Id: Ife450b9f5dfe23f07b6f346c8e27c214fc85e083\nSigned-off-by: Praneeth Paladugu \u003cppaladug@codeaurora.org\u003e\n" }, { "commit": "27535d83c7e0287267ff0bcddb35527a4a58cb14", "tree": "cd11c2c7789688bb5a78b1931e857ca2f368c713", "parents": [ "2ba7f1907db651da7bfea1c14377bb5dfe75daa8", "13f6bebd7a84835348a63b4cf42afddb11a96040" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun May 20 19:37:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun May 20 19:37:32 2012 -0700" }, "message": "Merge \"[media] v4l2: add VIDIOC_(TRY_)DECODER_CMD\" into msm-3.0" }, { "commit": "be62bd534f4c18ab9f58735b4453bb65f217cf69", "tree": "f051fee86efbb1f6506669da505a0149c7d27567", "parents": [ "a78066f79ce1ee97923a77f7efe8862cdb7e1006", "4584b5fe6f4ed1f4b0e5131c83a767a97497b9de" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 19 14:36:32 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 19 14:36:32 2012 -0700" }, "message": "Merge \"msm: camera: Add support for gesture driver\" into msm-3.0" }, { "commit": "a78066f79ce1ee97923a77f7efe8862cdb7e1006", "tree": "b2ae33f266ffd3cf1f69ae9799c18c2987facc72", "parents": [ "afaed13ec689ee89c55baf09d3717bfb39a4b238", "4947d8cd8cc0889058801820d56edd9bbcb23d70" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 19 13:11:20 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 19 13:11:20 2012 -0700" }, "message": "Merge \"msm: vidc: Use pre-computed frame delta values in WFD use case\" into msm-3.0" }, { "commit": "4584b5fe6f4ed1f4b0e5131c83a767a97497b9de", "tree": "0558d397d014d20d2a8356161a0beb06bc59783d", "parents": [ "54d49d7bc7432b952fa791fac299c4c0bbb73e78" ], "author": { "name": "Sunid Wilson", "email": "sunidw@codeaurora.org", "time": "Fri Apr 13 12:48:25 2012 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 19 12:34:34 2012 -0600" }, "message": "msm: camera: Add support for gesture driver\n\nAdded gesture driver code. Gesture node is a subdevice to\nserver node.\n\nChange-Id: I488da3dbdb502a2f78b0cd5269dd113c472ee377\nSigned-off-by: Sunid Wilson \u003csunidw@codeaurora.org\u003e\n" }, { "commit": "13f6bebd7a84835348a63b4cf42afddb11a96040", "tree": "fc023268e6ca82f546ae3eb6370be9240eef1988", "parents": [ "770fb83ab61722e46a3c855bc0eeed906e35774f" ], "author": { "name": "Hans Verkuil", "email": "hans.verkuil@cisco.com", "time": "Thu Nov 24 09:53:43 2011 -0300" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Fri May 18 14:43:33 2012 -0700" }, "message": "[media] v4l2: add VIDIOC_(TRY_)DECODER_CMD\n\nAs discussed during the 2011 V4L-DVB workshop, the API in dvb/video.h should\nbe replaced by a proper V4L2 API. This patch turns the VIDEO_(TRY_)DECODER_CMD\nioctls into proper V4L2 ioctls.\n\nChange-Id: I8f293613c833b40ffa62e814c0d88a55ea0c7f13\nSigned-off-by: Hans Verkuil \u003chans.verkuil@cisco.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "86f1ed975f76954ca25a1e711a848fd74498ded3", "tree": "8ff9e9045c260af4662d9d89ad2f35e3ec7df93c", "parents": [ "829dc645a69ac718adba9372bab2231b250e5793", "1c9030171b3c8175f3631f1de80b4d2d9c2febef" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 17 10:26:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 17 10:26:09 2012 -0700" }, "message": "Merge changes I901701be,I31a03044 into msm-3.0\n\n* changes:\n msm: board-8064: Add user space RC input loopback driver support\n media: rc: Add remote control event report from user space input\n" }, { "commit": "e74a703f99fd883a20305c4d300363ece8fd07f1", "tree": "2b66329385e22d578611aa82fc63403138afa2d7", "parents": [ "1c0e9081a5983f6d02100e178623564857a3468b", "3766b1e6b4dea7dea0abed1e9090390640a12909" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 17 08:43:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 17 08:43:58 2012 -0700" }, "message": "Merge \"media: msm_vidc: Add video driver for video core.\" into msm-3.0" }, { "commit": "d4cb56c3e272727a8118e7760edf138e3d310768", "tree": "100eff9b08a94cd70e0d67353ef69810eeb14662", "parents": [ "b910bf98c6dfb453f81b4ab000d03cc29c3c585d" ], "author": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Thu Mar 22 19:04:13 2012 +0530" }, "committer": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Thu May 17 11:20:06 2012 +0530" }, "message": "media: rc: Add remote control event report from user space input\n\nSome of user space applications need to send the remote key events\nto kernel input subsystem, so for these type of applications this driver\nenables them to send key events to kernel.\nUser has to send the key event type (pressed,repeated,released) and scan\ncode value.\n\nChange-Id: I31a03044702020bd7bfd6cfdc310e65f85d282ef\nSigned-off-by: Ravi Kumar V \u003ckumarrav@codeaurora.org\u003e\n" }, { "commit": "3766b1e6b4dea7dea0abed1e9090390640a12909", "tree": "56373d189c29e0470fe60dce166543d0a321cef8", "parents": [ "d8217960a0d6868016e0c8448dd7bc325450c910" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Wed Jan 11 18:58:41 2012 -0800" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Wed May 16 12:32:29 2012 -0700" }, "message": "media: msm_vidc: Add video driver for video core.\n\n- Adds video encoding and decoding functionality.\n- Implements v4l2 interface based driver for interacting\n with userspace modules to perform video encoding and\n decoding.\n- Implements kernel API for interacting with kernel\n modules like Wifi display(encoder) and V4L2 based\n DVB(decoder).\n\nChange-Id: Iadb83b60139e659ae7f66e5dc38c46fef52ca99d\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "4947d8cd8cc0889058801820d56edd9bbcb23d70", "tree": "96094506d50ec20729130fa27a6a5cc9cc72bbd2", "parents": [ "7e3bfd67b3c779c669ede2debfb6fcabc4884ec1" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Tue Apr 03 12:41:06 2012 -0700" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Mon May 14 21:56:39 2012 -0700" }, "message": "msm: vidc: Use pre-computed frame delta values in WFD use case\n\nIn WFD use-case with frame skipping enabled, we wish to fool the core\ninto thinking that that the frames are coming at a consistent rate so\nthat we don\u0027t run into any issues with the core\u0027s rate control\nmechanism.\n\nIntroduce a client-settable property that dictates what the timestamp\ndelta between any two frames might be.\n\nChange-Id: Iea3f97879227b7932543d3449d311758dc4a2f59\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "b6255ee3d82798eb1eee9fb1cca713317b5afae8", "tree": "5b34f32a965dc772a99188293387022d21c5532e", "parents": [ "d69c5c2cf21e734210029afd803a96a942084af3", "788ab1bb03d304232711b6ca9718534f588ee9fc" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 14 11:23:37 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon May 14 11:23:37 2012 -0700" }, "message": "Merge branch \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media\n\nPull media fixes from Mauro Carvalho Chehab:\n \"For a some fix patches for v3.4, including a regression fix at DVB core\"\n\nFix up trivial conflicts in Documentation/feature-removal-schedule.txt\n\n* \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:\n [media] gspca - sonixj: Fix a zero divide in isoc interrupt\n [media] media: videobuf2-dma-contig: include header for exported symbols\n [media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer\n [media] media: vb2-memops: Export vb2_get_vma symbol\n [media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS\n [media] s5p-fimc: Fix locking in subdev set_crop op\n [media] dvb_frontend: fix a regression with DVB-S zig-zag\n [media] fintek-cir: change || to \u0026\u0026\n [media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal\n [media] rc: Postpone ISR registration\n [media] marvell-cam: fix an ARM build error\n [media] V4L: soc-camera: protect hosts during probing from overzealous user-space\n" }, { "commit": "734476bedc61c6faaed7038131ac63f72ef2aac4", "tree": "75c6a24fbbeed4629899b9992b3e790c25a75def", "parents": [ "f98392584f2e597f279b77f35e7f702f89e9a9b6" ], "author": { "name": "Jeyaprakash Soundrapandian", "email": "jsound@codeaurora.org", "time": "Thu May 03 20:08:15 2012 -0700" }, "committer": { "name": "Jeyaprakash Soundrapandian", "email": "jsound@codeaurora.org", "time": "Sun May 13 11:03:13 2012 -0700" }, "message": "msm: camera: eeprom subdevice support for camera sensor\n\nThe OTP data for calibration is stored in the eeprom. The eeprom\nis registered as a subdevice and necessary functionality is added\nfor reading and fetching data to user space.\n\nChange-Id: I119a31fa7eccc597c92b7c418c8d04c291e294f5\nSigned-off-by: Jeyaprakash Soundrapandian \u003cjsound@codeaurora.org\u003e\n" }, { "commit": "77d0bb3d8e93d74859951a3f1d4a2f58488d627a", "tree": "4470aab739caefebf829f911f4a0ba992c729ef1", "parents": [ "8ccae67eee58de2c3b8614dd401f411a09ad606b" ], "author": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Fri May 04 18:17:26 2012 +0530" }, "committer": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Wed May 09 18:47:10 2012 +0530" }, "message": "media: rc: Add support for Universal Electronics(UE) remote control keymap\n\nUE remote control uses RF4CE protocol to send the user\ncontrol data through RF interface.\n\nChange-Id: Id99ad2ceaf8e8e28b71e827bd950a6e9b7f5fe76\nSigned-off-by: Ravi Kumar V \u003ckumarrav@codeaurora.org\u003e\n" }, { "commit": "cf26486f50d223cd763909b08cea04bd525e25c6", "tree": "87727744fbe286f8438e65e9922acee0df84bba5", "parents": [ "56f7efa84140d5fd51ef917967a26915b08eacc0" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Thu Apr 19 19:10:38 2012 -0700" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri May 04 14:43:57 2012 -0700" }, "message": "msm: camera: Separate AXI from vfe\n\nThis change will separate axi functionality from vfe core,\nin order for camera RDI (Raw dump interface) to work.\nWhen RDI is used, only axi subdev is configured.\nWhen PIX interface is used, both vfe and axi are configured.\n\nChange-Id: Id986ea1c12bbeb0664d08429acffe24d20a51028\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "00c882d6fc56349032062f8f17d556ef475c1e5f", "tree": "76910d118efd32aca27529a05944bfb119f84ac3", "parents": [ "0a46d9478788609a3f11d0183b26fbbafd3baa78" ], "author": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Thu Apr 12 10:50:53 2012 +0530" }, "committer": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Fri May 04 11:03:07 2012 +0530" }, "message": "radio-tavarua: Fix corner cases in dqbuf\n\n- Sometimes user data getting corrupted and it is not available\n at the kernel level\n- Use the kernel buffer instead of user space buffer to copy\n the data from fifo.\n- Increase the STD_BUF_SIZE buffer size from 64 to 128 bytes\n\nCRs-Fixed: 344443\nChange-Id: Ibb8c60f18b72cbcd63c2f39eb49fbbadb7af5443\nSigned-off-by: Venkateshwarlu Domakonda \u003cVenkateshwarlu@codeaurora.org\u003e\n" }, { "commit": "cd681bf9f50cf17b70e24852361bc67c91b116ec", "tree": "1e1b5242e784f430ae0a494f85c221f3d6216fc3", "parents": [ "bf8379fc305d7c54f92739ec5cb01ba41a8c4e61" ], "author": { "name": "Pradnya Chaphekar", "email": "pradnyac@codeaurora.org", "time": "Sat Feb 18 23:05:56 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 03 01:58:30 2012 -0600" }, "message": "vidc: 1080p : Add support for slice delivery mode to encoder\n\nSlice delivery mode enables confguring the encoder to deliver\none slice per output buffer. This mode is valid only for h264\ncodec when multi slice config is set to slice by mb.\n\nChange-Id: I1bb88a67fecf4a76ad828f4c4981ff3cad648f24\nSigned-off-by: Pradnya Chaphekar \u003cpradnyac@codeaurora.org\u003e\n" }, { "commit": "94b4c83b8c27dfadc3d9756d41bcadbf4e9f090c", "tree": "f15f64001ecdc4a00a373c1dd4339c95e8ea0109", "parents": [ "5d6564ee96bbd09f1d5a3368b11fd6c70d3cd150" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Mar 02 21:27:16 2012 -0800" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Sun Apr 29 14:05:04 2012 -0700" }, "message": "msm: camera: Change camera server into a video node\n\nConvert ioctl and server node to be compliant with\nv4l2 architecture.\nAdd multiple control and event queue to\nsupport multiple camera instance\n\nChange-Id: Idcb8533e15599f7fb0ad621c3da6b19235fa64f4\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "cc1f41d135b0d6548c5c3f53c52c164ef0bf9595", "tree": "812f50eacbd5b48e1674a1d1870c8dbc7c25a600", "parents": [ "a764f53fd9ed1e2c45630efe5fed78ef2e380212" ], "author": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Thu Apr 19 22:24:17 2012 +0530" }, "committer": { "name": "Trilok Soni", "email": "tsoni@codeaurora.org", "time": "Sat Apr 28 22:36:01 2012 +0530" }, "message": "media: rc: Add wakeup functionality from GPIO IR event\n\nAdd can_wakeup functionality flag so that host can wakeup from\nIR event.\n\nChange-Id: I5cfa95fc17f390271d315a38d14dcbccd49dda78\nSigned-off-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\n" }, { "commit": "db4bc8162185a65f71d7a144d1d1db7c97b94d47", "tree": "e81bdd583b9cf6f60ae2b4932e657c66163377a2", "parents": [ "337840e64c86df8906facd53e9f09d9f5c883723", "4dd43083ccd149e9b0cfd5b2f635389597105920" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 27 08:02:12 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 27 08:02:12 2012 -0700" }, "message": "Merge changes I61f72bf1,I197a4c43 into msm-3.0\n\n* changes:\n msm: vidc: Fixes memory protection in secure enc/dec concurrency\n msm: vidc: Handles secure/non-secure concurrency.\n" }, { "commit": "13d82f8216593b296ef799b5d9663d3dd869959a", "tree": "c77eb7b54f8bb0075e268653d4d8630c05a1405f", "parents": [ "f13fd34bf7779182c3cc3f4c688d0516e1d1a928" ], "author": { "name": "Deepak kotur", "email": "dkotur@codeaurora.org", "time": "Mon Mar 12 11:12:32 2012 -0700" }, "committer": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Thu Apr 26 18:41:30 2012 -0700" }, "message": "msm: vidc: Handles secure/non-secure concurrency.\n\nHandles concurrency scenarios by preventing\nnonsecure sessions when secure sessions are\nongoing. This is required since secure and\nnon-secure sessions cannot run concurrently.\n\nChange-Id: I197a4c437312d916c0f75e7eb026c0570fee12ff\nSigned-off-by: Deepak Kotur \u003cdkotur@codeaurora.org\u003e\n" }, { "commit": "2f9a0c880d5c1e159f647950a2eed26618ad2ff1", "tree": "99bc40ffdac05c88f97eb5e49afe01c2a85440a9", "parents": [ "e631f578048e2afd8bfede2e9dc86aa4592def3a" ], "author": { "name": "Guennadi Liakhovetski", "email": "g.liakhovetski@gmx.de", "time": "Wed Apr 18 06:43:09 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Apr 26 11:30:12 2012 -0300" }, "message": "[media] V4L: soc-camera: protect hosts during probing from overzealous user-space\n\nIf multiple clients are registered on a single camera host interface,\nthe user-space hot-plug software can try to access the one, that probed\nfirst, before probing of the second one has completed. This can be\nhandled by individual host drivers, but it is even better to hold back\nthe user-space until all the probing on this host has completed. This\nfixes a race on ecovec with two clients registered on the CEU1 host, which\notherwise triggers a BUG() in sh_mobile_ceu_remove_device().\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ee55c1984badacc44f716bf9dd900f815650e650", "tree": "f14a3ec7efe161f5e4e19d989fc8637c25734d41", "parents": [ "759104cab29dfd6bbb7d6b2340e2a0eef48ea0eb" ], "author": { "name": "Ninad Mahimkar", "email": "ninadm@codeaurora.org", "time": "Wed Apr 25 14:36:17 2012 -0700" }, "committer": { "name": "Ninad Mahimkar", "email": "ninadm@codeaurora.org", "time": "Wed Apr 25 14:36:17 2012 -0700" }, "message": "msm: camera: Add SOF timestamps\n\nAdd a message for passing real time clock timestamp\nto userspace when SOF is generated\n\nChange-Id: I99cb05bb3d619c4bf6da520366bd42e7e6ac8ee2\nSigned-off-by: Ninad Mahimkar \u003cninadm@codeaurora.org\u003e\n" }, { "commit": "a6914ca5f03f7f8e35ad443c612a6081a8efa127", "tree": "c316797c604f36893aab92d9f8b27de6d73d59b4", "parents": [ "a9eb03a11551c9ec801d57630394ef1ef2a41630" ], "author": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Mon Apr 09 14:06:50 2012 -0400" }, "committer": { "name": "Terence Hampson", "email": "thampson@codeaurora.org", "time": "Fri Apr 20 13:26:49 2012 -0400" }, "message": "msm: mpq8064: Add VCAP v4l2 device for MPQ8064\n\nAdding v4l2 interface for VCAP device driver that utilizes\nvideo capture (VC) portion of VCAP.\n\nFuture addition will allow for v4l2 VCAP to utilize video\nprocessing (VP).\n\nChange-Id: I5e68f4ba39f569ef07d67ca39fb922ad5a19aa4e\nSigned-off-by: Terence Hampson \u003cthampson@codeaurora.org\u003e\n" }, { "commit": "6627b36ee06ab56a800e2b570a038423c6572b02", "tree": "685860d5035d57c1ee2212a72616abbc16f84e60", "parents": [ "be8ee19082a253eca97b1d7e07e79fab70717a3b" ], "author": { "name": "Rajakumar Govindaram", "email": "rajakuma@codeaurora.org", "time": "Sun Jan 29 19:00:30 2012 -0800" }, "committer": { "name": "Rajakumar Govindaram", "email": "rajakuma@codeaurora.org", "time": "Wed Apr 18 10:10:41 2012 -0700" }, "message": "msm: camera: 8960: Unify Autofocus actuator\n\nThe actuator functionality is the same for different camera\nmodules. So a single actuator driver module is supported.\nThe variation is because of actuator control parameters,\nwhich are made available in user space actuator driver\nfor better integration with tools used for autofocus\ntuning.\n\nChange-Id: Ibbae2ef426b570c59ec3796ac56abcf05af28259\nSigned-off-by: Rajakumar Govindaram \u003crajakuma@codeaurora.org\u003e\n" }, { "commit": "3f0a4f9e036710d2ea95bd24ae492d9d9b822754", "tree": "76334a4c5c2314ef290e9bec4ffdcef59eb2e71c", "parents": [ "0552664c24ca5bc7bdefd7708a06770c1e864c3d", "4a3b94251460fbfc66244475a5f1a54c72a9fe97" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 12 19:09:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 12 19:09:14 2012 -0700" }, "message": "Merge changes I38882200,Ia1ac4d9e,Idef723e5 into msm-3.0\n\n* changes:\n msm: camera: v4l2 updates\n msm: camera: sensor changes for 7x30 v4l2\n msm: camera: prepare msm8x55 camera for V4L2 architecture.\n" }, { "commit": "c126085486120bb5dd24954b15099df5ae72e47f", "tree": "ea9b34fcbd84c8b316a9fba2678e0c54947e90bd", "parents": [ "40ffa74c90322a39281afc77f283d3c010fadba3", "700f5c27d0687f96e9c4a38742b1c0b247051238" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 12 17:15:58 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 12 17:15:58 2012 -0700" }, "message": "Merge \"msm: vidc: Adds API to request performance level.\" into msm-3.0" }, { "commit": "4a3b94251460fbfc66244475a5f1a54c72a9fe97", "tree": "c5da0ec85184ca6ec7df47680480e43ad3b538bd", "parents": [ "66deac39b2f75cdd2a58adc964b6d6312d0b75f8" ], "author": { "name": "Philippe Gravel", "email": "pgravel@codeaurora.org", "time": "Fri Mar 23 14:21:04 2012 -0700" }, "committer": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Thu Apr 12 15:44:03 2012 -0700" }, "message": "msm: camera: v4l2 updates\n\n- Adds some protection against unexpected calls\n- Update ifdef guards in msm_camera.h\n\nChange-Id: I388822001159188a6c487f8c0deefa8fb5238249\nSigned-off-by: Philippe Gravel \u003cpgravel@codeaurora.org\u003e\nSigned-off-by: Sunil Joseph \u003csunilj@codeaurora.org\u003e\n" }, { "commit": "700f5c27d0687f96e9c4a38742b1c0b247051238", "tree": "91e242d738b60a7f1df481b6a2f2dce5858a6cae", "parents": [ "1a3f3b24fa482d3c762d4ec4b8e56836bba821ae" ], "author": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Wed Mar 28 17:35:28 2012 -0700" }, "committer": { "name": "Vinay Kalia", "email": "vkalia@codeaurora.org", "time": "Thu Apr 12 11:54:53 2012 -0700" }, "message": "msm: vidc: Adds API to request performance level.\n\nAdds API to request for a particular performance\nlevel from video core. This is needed for Wi-fi\ndisplay (WFD) to reduce end to end latency.\n\nChange-Id: Ib4133b8cd62ccad286be1984f944911754b887c5\nSigned-off-by: Vinay Kalia \u003cvkalia@codeaurora.org\u003e\n" }, { "commit": "eaa3b3284a27a4beb76b725c2de43bb1c92b22f3", "tree": "e6e535e68d1fd75c6f309ee8503f77d81ae79ab0", "parents": [ "f27936311705f379566ecddd9a391aa17fcb65ea", "77ffaefbd4cfc296aefa85fbba7e3eb530dd56da" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 12 10:26:52 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 12 10:26:52 2012 -0700" }, "message": "Merge \"media: rc: Add support for RC6 philips IR remote control keymap\" into msm-3.0" }, { "commit": "53e4d58968bb8babccf7bc32f6cee9e538c51871", "tree": "39ad0d88e8e30c47745f00bfd8b7bb0f7a6ea097", "parents": [ "ecd0af5841911889bd4a1c9fe271e1a3ae2c3cd6", "a2688820ce17aa8ba1c67077c3ca9e9d5246637b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Apr 12 01:49:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Apr 12 01:49:42 2012 -0700" }, "message": "Merge \"msm: camera: Acutuator and flash control\" into msm-3.0" }, { "commit": "bc98e97380f927af38464860a473df7b7f375a3e", "tree": "a146c2d94dafba6bb9fb1595a8c9e98de4f968d0", "parents": [ "ea3c61582ded8fd1ab25039e74f3accdc8400fba", "0a8ba3750f8c2cd2d3f467b49a00594dce6ce9d1" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Apr 11 07:31:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Apr 11 07:31:13 2012 -0700" }, "message": "Merge \"[media] V4L: add two new ioctl()s for multi-size videobuffer management\" into msm-3.0" }, { "commit": "77ffaefbd4cfc296aefa85fbba7e3eb530dd56da", "tree": "274793223a514f1893a93672eeae837dfea8c211", "parents": [ "5c5bd7718571689c38b4f48b490b044f0f034a41" ], "author": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Tue Apr 10 16:33:46 2012 +0530" }, "committer": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Wed Apr 11 12:48:19 2012 +0530" }, "message": "media: rc: Add support for RC6 philips IR remote control keymap\n\nRC6 philips remote control uses RC6 protocol to send the user\ncontrol data through IR.\n\nChange-Id: I53f93c679c08a2b2aca154a761f84dae2f1c52e9\nSigned-off-by: Ravi Kumar V \u003ckumarrav@codeaurora.org\u003e\n" }, { "commit": "8ac12c6000a4bf4326be06ac3e638716b9f9378f", "tree": "bc51eaa5b40883b25b342581de6bd65e04c73498", "parents": [ "0a2f143618e7b2f6b458758e17472aefbd3c0c00", "71731d5d400fa60cca24303aa31dd95a1443803d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Apr 10 20:15:14 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Apr 10 20:15:14 2012 -0700" }, "message": "Merge \"radio: iris: Implement new radio IOCTLs.\" into msm-3.0" }, { "commit": "a2688820ce17aa8ba1c67077c3ca9e9d5246637b", "tree": "4f174159ce4577f9b4346c401c6e98155150cc89", "parents": [ "cc04ed89060e2a09bba9f912e9aa1bf0c82aff93" ], "author": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Thu Apr 05 20:22:50 2012 -0700" }, "committer": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Tue Apr 10 15:52:33 2012 -0700" }, "message": "msm: camera: Acutuator and flash control\n\nPass actuator and flash support to user space\nso that modules can be enabled and used based\non availability at run time\n\nChange-Id: Ia801f17181b492d65feb7bd707d9cc344de9cfe6\nSigned-off-by: Sreesudhan Ramakrish Ramkumar \u003csrramku@codeaurora.org\u003e\n" }, { "commit": "c55856c548e0cec8b29e415a08a353a0ab1ac4c8", "tree": "fb589e23f42b08eeec0623de6ceb1546b52c2d85", "parents": [ "ee2c76e88960f91399f27fda65195c150f1cfb8f" ], "author": { "name": "Alhad Purnapatre", "email": "alhadp@codeaurora.org", "time": "Tue Feb 28 13:24:57 2012 -0800" }, "committer": { "name": "Alhad Purnapatre", "email": "alhadp@codeaurora.org", "time": "Sat Apr 07 17:06:38 2012 -0700" }, "message": "msm_fb: display: MSM V4l2 video overlay driver\n\nProvides a V4L2 device that uses the MDP overlay pipes (on MDP4),\nor the PPP interface (MDP3) to overlay frames on top of display\nframebuffer.\n\nSigned-off-by: Alhad Purnapatre \u003calhadp@codeaurora.org\u003e\nChange-Id: Iab69d0a5acfe993d13cb7a585e292b9a87eb90ee\n" }, { "commit": "0a8ba3750f8c2cd2d3f467b49a00594dce6ce9d1", "tree": "9897baf038f7ce6a44648bc906c8714ba1bd8e40", "parents": [ "abee3f9128d543557cf2a6c93e8248238afd1fc6" ], "author": { "name": "Guennadi Liakhovetski", "email": "g.liakhovetski@gmx.de", "time": "Wed Sep 28 11:34:06 2011 -0300" }, "committer": { "name": "Ashray Kulkarni", "email": "ashrayk@codeaurora.org", "time": "Fri Apr 06 14:13:56 2012 -0700" }, "message": "[media] V4L: add two new ioctl()s for multi-size videobuffer management\n\nA possibility to preallocate and initialise buffers of different sizes\nin V4L2 is required for an efficient implementation of a snapshot\nmode. This patch adds two new ioctl()s: VIDIOC_CREATE_BUFS and\nVIDIOC_PREPARE_BUF and defines respective data structures.\n\nChange-Id: Idb6c1e11f1665201f77c73168bb5a8de84b538eb\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\nSigned-off-by: Ashray Kulkarni \u003cashrayk@codeaurora.org\u003e\n" }, { "commit": "e25bde49960be4fa12cbc081aadabf95b793adc3", "tree": "c70f5b26a4cfb58191cc7805ebfe965d090176f5", "parents": [ "c0cf72b35de1b815742f91d1f42a45a872eddd4c" ], "author": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Tue Feb 28 01:51:40 2012 -0300" }, "committer": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Thu Apr 05 11:23:42 2012 +0530" }, "message": "[media] rc: Add support for GPIO based IR Receiver driver\n\nAdds GPIO based IR Receiver driver. It decodes signals using decoders\navailable in rc framework.\n\nChange-Id: Ifc4cbb6d5a507aeb9671fb0d559b97b1a95ea09c\nSigned-off-by: Ravi Kumar V \u003ckumarrav@codeaurora.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "71731d5d400fa60cca24303aa31dd95a1443803d", "tree": "4b2f21e21a8bafe827da4ec5a5f4cfa9fe3087e0", "parents": [ "c0cf72b35de1b815742f91d1f42a45a872eddd4c" ], "author": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Wed Apr 04 12:30:51 2012 +0530" }, "committer": { "name": "Venkateshwarlu Domakonda", "email": "Venkateshwarlu@codeaurora.org", "time": "Thu Apr 05 08:48:29 2012 +0530" }, "message": "radio: iris: Implement new radio IOCTLs.\n\nImplement IOCTLs for Tx power level control\n\nCRs-fixed: 349247\nChange-Id: Ie188b08fdf0aa697b6e1eada5c597813f0dc678f\nSigned-off-by: Venkateshwarlu Domakonda \u003cVenkateshwarlu@codeaurora.org\u003e\n" }, { "commit": "459429648e0dd7c9b2bbaffc63a4086614e4109e", "tree": "92b9fb412c0d3585cfc774ccb096570cf3eedd94", "parents": [ "880a92263446d5292b665e30c201e11bd6681ab7" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Wed Feb 15 19:21:25 2012 -0800" }, "committer": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Fri Mar 30 08:25:55 2012 -0700" }, "message": "msm: v4l2: use new IOMMU mapping API.\n\nThe ion_phys API is being deprecated. Instead there\nis a new set of API that does the same thing as ion_phys\nif the system has no IOMMU enabled. Otherwise, it\nreturns an IOMMU device virtual address.\n\nChange-Id: I1f01d33cbc6d236d28c9193a90e48377b9fb35cc\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\n" }, { "commit": "b2ad2bae31187ab0cbd0dbd982fbb4e27293897a", "tree": "e3d2d6ac0b566a1e0f899ea918f9795bc91f68d4", "parents": [ "58d901a9e02100c7e6f55071656167f68b83aba2", "d5a0297a2ce7b4a491dd264dbef855e53d95abfa" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 27 22:56:21 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 27 22:56:21 2012 -0700" }, "message": "Merge \"msm: vidc: Extract PAR info for MPEG4/DIVX.\" into msm-3.0" }, { "commit": "04231da7fd78847f4cec162e5f3ebe4011d96069", "tree": "fac43945a0ab9a1be86c4b867d5ec01a77e468f5", "parents": [ "4420ae85872f3a92e12136668e80bf584f216909", "0fa19849354c41e3ac89ec0b6b3bb411cb69b908" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Mar 27 08:10:43 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Mar 27 08:10:44 2012 -0700" }, "message": "Merge \"radio-tavarua: Send disable event\" into msm-3.0" }, { "commit": "d5a0297a2ce7b4a491dd264dbef855e53d95abfa", "tree": "6b381d8254cb7355de97de2fdc2b69456c20a2f4", "parents": [ "53e7427bf80d8081cbd891968a797d752fef5665" ], "author": { "name": "Arun Menon", "email": "menon@codeaurora.org", "time": "Thu Mar 01 10:51:06 2012 -0800" }, "committer": { "name": "Arun Menon", "email": "menon@codeaurora.org", "time": "Mon Mar 26 16:44:38 2012 -0700" }, "message": "msm: vidc: Extract PAR info for MPEG4/DIVX.\n\nDisplay needs the pixel aspect ratio information\nfrom the video decoder to display the picture\nwith the right aspect ratio. Video decoder extracts\nthe pixel aspect ratio information from the\nvideo core and passes it to the client/display\nas extradata.\n\nChange-Id: I4db2b8ba827af67bc01888d13c36c1b501934ccd\nSigned-off-by: Arun Menon \u003cmenon@codeaurora.org\u003e\n" }, { "commit": "250f6715a4112d6686670c5a62ceb9305da94616", "tree": "ee1c9b41ed1fed8174efb312421902f19c877e8c", "parents": [ "11bcb32848ddb5ab28f09f142b625e2ba4d55c4c", "313162d0b83836e2f57e51b9b8650fb4b9c396ea" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 24 10:41:37 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 24 10:41:37 2012 -0700" }, "message": "Merge tag \u0027device-for-3.4\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux\n\nPull \u003clinux/device.h\u003e avoidance patches from Paul Gortmaker:\n \"Nearly every subsystem has some kind of header with a proto like:\n\n\tvoid foo(struct device *dev);\n\n and yet there is no reason for most of these guys to care about the\n sub fields within the device struct. This allows us to significantly\n reduce the scope of headers including headers. For this instance, a\n reduction of about 40% is achieved by replacing the include with the\n simple fact that the device is some kind of a struct.\n\n Unlike the much larger module.h cleanup, this one is simply two\n commits. One to fix the implicit \u003clinux/device.h\u003e users, and then one\n to delete the device.h includes from the linux/include/ dir wherever\n possible.\"\n\n* tag \u0027device-for-3.4\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:\n device.h: audit and cleanup users in main include dir\n device.h: cleanup users outside of linux/include (C files)\n" }, { "commit": "2e99bff826119272ee10734756aba3631e0226e7", "tree": "06b17130070b0d9c73bfdf29cb5aac8ebb7bb81f", "parents": [ "80b6c0a555fdbd8f7b1ed928b4005f91ce21bdcb" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Mon Feb 13 21:12:08 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Fri Mar 23 11:46:50 2012 -0700" }, "message": "video: msm: wfd: IOMMU migration\n\nMigrate WFD to IOMMU APIs. Commit contains following changes:\n- Switch from allocate buffer model to use buffer model in order\n to have the flexibility to map buffers into seperate domains.\n- Use the ION caching APIs to flush buffers in case they are cached.\n Earlier on, we used uncached buffers, hence we didn\u0027t have a need\n to flush.\n\nChange-Id: I959027ee94a5d6074005f1de420c66cbe55db776\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "80b6c0a555fdbd8f7b1ed928b4005f91ce21bdcb", "tree": "293789d601e4d2555582a826e2ccf3d69eab11f7", "parents": [ "e812e7421273ed70ed2598dd447d22e61f6ccf90", "ef091c924308a03ba2f5ce614faaf7b4dabd3901" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 23 10:51:04 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 23 10:51:04 2012 -0700" }, "message": "Merge \"vidc: Migrate to new ION cache ops API.\" into msm-3.0" }, { "commit": "0fa19849354c41e3ac89ec0b6b3bb411cb69b908", "tree": "458add1afd6f987c3ddbf56c35f738164dc1d1bd", "parents": [ "7c3972cd66c44e73abe9b6f202c48aca3323ce6c" ], "author": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Wed Mar 14 22:54:53 2012 +0530" }, "committer": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Thu Mar 22 11:37:17 2012 +0530" }, "message": "radio-tavarua: Send disable event\n\nSend disable event when FM turn off is completed\nso that file descriptor can be released safely\n\nCRs-Fixed: 339470\nChange-Id: Ib66f4cd79a470498404a07759d730504f6615e33\nSigned-off-by: Ayaz Ahmad \u003caahmad@codeaurora.org\u003e\n" }, { "commit": "ef091c924308a03ba2f5ce614faaf7b4dabd3901", "tree": "2ca327f487f2075bed768e879b93de74fb80e247", "parents": [ "8405e3e79e0144b735dd988fad37ace208846992" ], "author": { "name": "Deepak Kotur", "email": "dkotur@codeaurora.org", "time": "Tue Feb 28 11:25:35 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Wed Mar 21 11:20:48 2012 -0700" }, "message": "vidc: Migrate to new ION cache ops API.\n\nNew cache ops API are provided thru ION interface\nmigrating the in kernel cache ops to use the\nnew cache ops API.\n\nChange-Id: Idf152429316cec2eec8417d72160b7bd53488fc4\nSigned-off-by: Deepak Kotur \u003cdkotur@codeaurora.org\u003e\n" }, { "commit": "48e971cd7fc2440d49159786ecc8786298f98cec", "tree": "4921cb8c5c365f49155dfa680cf675bb597890ab", "parents": [ "7705b6d8eac89067e5177835468c99e71e2cd40c" ], "author": { "name": "Guennadi Liakhovetski", "email": "g.liakhovetski@gmx.de", "time": "Wed Mar 14 08:37:03 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Mar 19 22:11:06 2012 -0300" }, "message": "[media] V4L: sh_mobile_ceu_camera: maximum image size depends on the hardware version\n\nNewer CEU versions, e.g., the one, used on sh7372, support image sizes\nlarger than 2560x1920. Retrieve maximum sizes from platform properties.\n\nSigned-off-by: Guennadi Liakhovetski \u003cg.liakhovetski@gmx.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "251cb88e2e231a00601dbc95647ac8f13ffdec24", "tree": "1ac9cb6ab5b7c8afd5f98962efad1abeb256aad7", "parents": [ "08cd43cc4623c13aa0bf4efa39d087dbe53418e7" ], "author": { "name": "Martin Hostettler", "email": "martin@neutronstar.dyndns.org", "time": "Sat Dec 17 07:10:55 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Mar 19 18:56:33 2012 -0300" }, "message": "[media] v4l: Add driver for Micron MT9M032 camera sensor\n\nThe MT9M032 is a parallel 1.6MP sensor from Micron controlled through I2C.\n\nThe driver creates a V4L2 subdevice. It currently supports cropping, gain,\nexposure and v/h flipping controls in monochrome mode with an\nexternal pixel clock.\n\n[Lots of clean up, fixes and enhancements]\n\nSigned-off-by: Martin Hostettler \u003cmartin@neutronstar.dyndns.org\u003e\nSigned-off-by: Laurent Pinchart \u003claurent.pinchart@ideasonboard.com\u003e\nReviewed-by: Sylwester Nawrocki \u003cs.nawrocki@samsung.com\u003e\nAcked-by: Sakari Ailus \u003csakari.ailus@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "073e0cab00d6cf60279de167d8063c5e5f4b5715", "tree": "ebb0730f275f26e4afb67c29729f6e79e033b3d9", "parents": [ "9dabf73bdc26583c2b12fae0276f9333b1c9bfb6" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Tue Mar 06 12:26:08 2012 -0800" }, "committer": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Mon Mar 19 14:35:43 2012 -0700" }, "message": "msm: camera: add fields to msm_stats_buf for cache operations.\n\nAdd a couple of fields to the msm_stats_buf structure\nfor cache coherence support on stats buffers from\nuser-space.\n\nChange-Id: I3553fcf6359e4e748eb309d4a0a5979999d96f09\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\n" }, { "commit": "955b44304afca143b82304fe421e990ec607834a", "tree": "f0046ed726b7c677d6d70d256c816573cb503932", "parents": [ "23bfb5be9f4c14937d70ed09f24a19d86df1951b" ], "author": { "name": "Dan Carpenter", "email": "dan.carpenter@oracle.com", "time": "Sat Mar 10 04:58:18 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Mar 19 15:45:01 2012 -0300" }, "message": "[media] gpio-ir-recv: a couple signedness bugs\n\nThere are couple places where we check unsigned values for negative. I\nchanged -\u003egpin_nr to signed because in gpio_ir_recv_probe() we do:\n if (pdata-\u003egpio_nr \u003c 0)\n return -EINVAL;\nI also change gval to a signed int in gpio_ir_recv_irq() because that\u0027s\nthe type that gpio_get_value_cansleep() returns and we test for negative\nreturns.\n\nSigned-off-by: Dan Carpenter \u003cdan.carpenter@oracle.com\u003e\nReviewed-by: Trilok Soni \u003ctsoni@codeaurora.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "63b1a90da93e019adcafa2b2b1b921fc97debec5", "tree": "1b90018dd9b9ac89207293be1672427ac377c33e", "parents": [ "f877ed9780f43da51a4544e5b90b7f4a145964ff" ], "author": { "name": "Scott Jiang", "email": "scott.jiang.linux@gmail.com", "time": "Thu Mar 08 17:44:17 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Mar 19 15:08:20 2012 -0300" }, "message": "[media] add blackfin capture bridge driver\n\nThis is a v4l2 bridge driver for Blackfin video capture device, support ppi and eppi interface.\n\nSigned-off-by: Scott Jiang \u003cscott.jiang.linux@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "f877ed9780f43da51a4544e5b90b7f4a145964ff", "tree": "084e1351d08e2aa6b3fdcbc7796bd6ac35619a22", "parents": [ "202ea1f05b15e9fee05426d5c6f1d16201d4687f" ], "author": { "name": "Scott Jiang", "email": "scott.jiang.linux@gmail.com", "time": "Thu Mar 08 17:44:16 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Mar 19 15:04:26 2012 -0300" }, "message": "[media] vs6624: add vs6624 sensor driver\n\nThis is a v4l2 sensor-level driver for the ST VS6624 camera.\n\nSigned-off-by: Scott Jiang \u003cscott.jiang.linux@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "202ea1f05b15e9fee05426d5c6f1d16201d4687f", "tree": "1a796d21a28dd37b5ff1ea8840b7723cff7f6814", "parents": [ "aa2e682a48ab96c27772c523a20e03850819afa1" ], "author": { "name": "Scott Jiang", "email": "scott.jiang.linux@gmail.com", "time": "Thu Mar 08 17:44:15 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Mar 19 15:04:10 2012 -0300" }, "message": "[media] adv7183: add adv7183 decoder driver\n\nThis driver is a v4l2 subdevice driver to support Analog Devices ADV7183 SDTV video decoder.\n\nSigned-off-by: Scott Jiang \u003cscott.jiang.linux@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b9d0aa6e211039548f1480a5838398d517f1c3a9", "tree": "2e1a6bab9e8d9c393c6a2af528bbe0bc0a91e215", "parents": [ "f769c26085ee0945fba3ba0ea48781770a8c81e2" ], "author": { "name": "Laurent Pinchart", "email": "laurent.pinchart@ideasonboard.com", "time": "Sun Dec 18 20:41:19 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Mar 19 14:06:12 2012 -0300" }, "message": "[media] v4l: Add custom compat_ioctl32 operation\n\nDrivers implementing custom ioctls need to handle 32-bit/64-bit\ncompatibility themselves. Provide them with a way to do so.\n\nTo avoid circular module dependencies, merge the v4l2-compat-ioctl32\nmodule into videodev. There is no point in keeping them separate, as the\nv4l2_compat_ioctl32() function is required by videodev if CONFIG_COMPAT\nis set anyway.\n\nSigned-off-by: Laurent Pinchart \u003claurent.pinchart@ideasonboard.com\u003e\nReviewed-by: Hans Verkuil \u003chans.verkuil@cisco.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "210061ffd99eed2235baa6904b1fbf1d7f26f9b5", "tree": "66142c89179a080c66ee88059d5822612157ed48", "parents": [ "a7046bbcfd883bdeae046d32899e953084cdb551" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Feb 14 20:56:16 2012 -0800" }, "committer": { "name": "James Melvin", "email": "jmelvin@codeaurora.org", "time": "Fri Mar 16 10:34:41 2012 -0600" }, "message": "msm: camera: Add media device node\n\nAdd media device node for each camera sensor\nSensor and video node info will be used\nfor device discovery from userspace\n\nChange-Id: Id8c2f3e952c83259bb6b273cb6b3f04ed93d0ef3\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "313162d0b83836e2f57e51b9b8650fb4b9c396ea", "tree": "8f39f20515a924d392cf9a72db0918fda07a34c7", "parents": [ "51990e825431089747f8896244b5c17d3a6423f1" ], "author": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Mon Jan 30 11:46:54 2012 -0500" }, "committer": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Fri Mar 16 10:38:24 2012 -0400" }, "message": "device.h: audit and cleanup users in main include dir\n\nThe \u003clinux/device.h\u003e header includes a lot of stuff, and\nit in turn gets a lot of use just for the basic \"struct device\"\nwhich appears so often.\n\nClean up the users as follows:\n\n1) For those headers only needing \"struct device\" as a pointer\nin fcn args, replace the include with exactly that.\n\n2) For headers not really using anything from device.h, simply\ndelete the include altogether.\n\n3) For headers relying on getting device.h implicitly before\nbeing included themselves, now explicitly include device.h\n\n4) For files in which doing #1 or #2 uncovers an implicit\ndependency on some other header, fix by explicitly adding\nthe required header(s).\n\nAny C files that were implicitly relying on device.h to be\npresent have already been dealt with in advance.\n\nTotal removals from #1 and #2: 51. Total additions coming\nfrom #3: 9. Total other implicit dependencies from #4: 7.\n\nAs of 3.3-rc1, there were 110, so a net removal of 42 gives\nabout a 38% reduction in device.h presence in include/*\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\n" }, { "commit": "7cd20b9aadbc5ca58cb4d368d5a076e7e3d74a8b", "tree": "7eb3b932ac20f4c09894538d2dd66ce42bde5d81", "parents": [ "34e22cf26735d32cecd082f6179efa665e7212c9", "4093ccc3b1498c2e7b7bf1ac7007babeaa58396c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 15 02:36:15 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 15 02:36:15 2012 -0700" }, "message": "Merge \"mm_video: vidc: SPS PPS enable for IDR and zero stuff bytes\" into msm-3.0" }, { "commit": "f2b497fec2033dfbb8fb0b86d361b10c6cd581ac", "tree": "13fb71e4d789c8b55d29d6629e38ce3aaf900cbe", "parents": [ "e8bb2ed3c9ce1c25a0ab3646bfe9da005eff9252", "c85b8ade5cb46b576eec2e5d667460d8d40cb207" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Mar 14 00:34:42 2012 -0700" }, "message": "Merge \"msm-camera: enhance the camsenser query structure\" into msm-3.0" }, { "commit": "c85b8ade5cb46b576eec2e5d667460d8d40cb207", "tree": "5ff8f45a9722a862356b4c6b25bf46b0635eb618", "parents": [ "54a02757a593b00fd3eea12fd3a9f766045601f6" ], "author": { "name": "Mingcheng Zhu", "email": "mingchen@codeaurora.org", "time": "Thu Mar 08 17:47:17 2012 -0800" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Tue Mar 13 01:43:53 2012 -0700" }, "message": "msm-camera: enhance the camsenser query structure\n\nMore information needs to pass to userspace.\n\nChange-Id: Ia7c5a5cf9a7f48e1c6167fd3ca2ddd56fbdbf8c9\nSigned-off-by: Mingcheng Zhu \u003cmingchen@codeaurora.org\u003e\n" }, { "commit": "4093ccc3b1498c2e7b7bf1ac7007babeaa58396c", "tree": "759b6431d7393140643b6aa66f9bec3327edee6f", "parents": [ "632752ab47cd287287a0a6382b802911c3b64225" ], "author": { "name": "Arun Menon", "email": "menon@codeaurora.org", "time": "Fri Mar 09 12:19:22 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Mon Mar 12 15:20:45 2012 -0700" }, "message": "mm_video: vidc: SPS PPS enable for IDR and zero stuff bytes\n\nThis change includes the driver support for the\nlatest firmware updates - SPS PPS generation for\nevery IDR frame encode and MPEG-2 zero stuff\nbytes consumption.\n\nChange-Id: Icdf3728897f47c90667cd650946ca324346611c5\nSigned-off-by: Arun Menon \u003cmenon@codeaurora.org\u003e\n" }, { "commit": "c6f7867e7ffc7e0cdfde39ec0cb05a3e4278bdf5", "tree": "268700f015fd853e46f17dbd108d3f20ec3e80b3", "parents": [ "bd404367576fa00bde02187899ba3824fb8a48f2" ], "author": { "name": "Sandeep Kodimela", "email": "skodimela@codeaurora.org", "time": "Wed Mar 07 10:44:04 2012 +0530" }, "committer": { "name": "Sandeep Kodimela", "email": "skodimela@codeaurora.org", "time": "Mon Mar 12 11:41:07 2012 +0530" }, "message": "msm-camera: Add 8MP and 1MP sensor support\n\nAdd support to mt9e013 and ov9726 sensors for v4l2 camera\narchitecture\n\nChange-Id: Ie0e12bb0b8f1d80c0aa40800f5578208ca86efcb\nSigned-off-by: Sandeep Kodimela \u003cskodimela@codeaurora.org\u003e\n" }, { "commit": "fd0f6851eb46512a6df2961923a0c24edc0a55b9", "tree": "c5fc735f8fd152b9de4896d40745a3eac9f3567d", "parents": [ "c5f79f6a0c70a390d07bcea4d7df6219f78e0904" ], "author": { "name": "Ravi Kumar V", "email": "kumarrav@codeaurora.org", "time": "Tue Feb 28 01:51:40 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Mar 08 11:14:10 2012 -0300" }, "message": "[media] rc: Add support for GPIO based IR Receiver driver\n\nAdds GPIO based IR Receiver driver. It decodes signals using decoders\navailable in rc framework.\n\nSigned-off-by: Ravi Kumar V \u003ckumarrav@codeaurora.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "25fa207157102162b1a6abba339dc5fe03f6adc5", "tree": "d5475f94bd89842c1cb2411c3351de163038fe94", "parents": [ "8d834b526a301d2d10db25835d195edf1141f1a0" ], "author": { "name": "Kyle Strickland", "email": "kyle@kyle.strickland.name", "time": "Sat Feb 18 02:24:53 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Mar 08 11:01:25 2012 -0300" }, "message": "[media] Add support for KWorld PC150-U ATSC hybrid tuner card\n\n[mchehab@redhat.com: CodingStyle fixes]\nSigned-off-by: Kyle Strickland \u003ckyle@kyle.strickland.name\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4bb6ead226a37531bf7a9c272b6a805b0d674567", "tree": "dbc62ff1a57e7a4191be543628e2be1c607a5b95", "parents": [ "91ec12ae8db08c1ce6fb91f2fef4301792ba6e22" ], "author": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Wed Feb 29 01:01:41 2012 -0800" }, "committer": { "name": "Kevin Chan", "email": "ktchan@codeaurora.org", "time": "Fri Mar 02 18:44:28 2012 -0800" }, "message": "msm: camera: send error to HAL if daemon crashed\n\nWhen camera userspace daemon crashes, the server fd\nwill be close, which trigger the msm_server_close\nfunction, we will check if there is an active camera\nsession. If camera is active, we will send a v4l2\nevent to HAL layer to signal an error. Application\nwill exit gracefully and close other open fds and\nexit camera session.\n\nChange-Id: I14ebc864d6cace7ca6f4dbfb935623a76eeccaa8\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\n" }, { "commit": "98491ffd095d337dd6a93ea6cfc2655e4c2a4979", "tree": "7c3e578072a677fbdda8e1a1fc87604fce1a2532", "parents": [ "12bf076cceba282ac8d230448d73ddbecad8f318", "bde8424c61d67d38ce83e2ba1f6ad217c2b2c158" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 28 18:14:18 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Feb 28 18:14:19 2012 -0800" }, "message": "Merge \"msm: camera: Fix for inline jpeg corrupted image\" into msm-3.0" }, { "commit": "350f2f4dad64b61376f08abfcdd7a339503ae6b8", "tree": "97f87897048d4921b56783498b5ca17c975433e5", "parents": [ "56e1df491b803dc962ba47adcdaf4ad034c697a8" ], "author": { "name": "Tomasz Stanislawski", "email": "t.stanislaws@samsung.com", "time": "Wed Sep 21 11:53:31 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Feb 28 18:26:40 2012 -0300" }, "message": "[media] v4l: s5p-tv: hdmi: add support for platform data\n\nMoving configuration of s5p-hdmi peripherals from driver data to\nplatfrom data.\n\nSigned-off-by: Tomasz Stanislawski \u003ct.stanislaws@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "56e1df491b803dc962ba47adcdaf4ad034c697a8", "tree": "a67b6e259ecf97fce27a85b5183869f23b6faa1c", "parents": [ "e861dccc6d8d870d764ed950417cfb0e65889b90" ], "author": { "name": "Tomasz Stanislawski", "email": "t.stanislaws@samsung.com", "time": "Tue Sep 20 12:53:55 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Feb 28 18:25:46 2012 -0300" }, "message": "[media] v4l: s5p-tv: add sii9234 driver\n\nSiI9234 is a converter of HDMI signal into MHL. The chip is present on some\nboards from Samsung S5P family. The chip\u0027s configuration procedure is based on\nMHD_SiI9234 driver created by doonsoo45.kim.\n\nThe driver is using:\n- i2c framework\n- v4l2 framework\n- runtime PM\n\nSigned-off-by: Tomasz Stanislawski \u003ct.stanislaws@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "bde8424c61d67d38ce83e2ba1f6ad217c2b2c158", "tree": "54f40730984ea5bfa2a45da56d9a0f48840cef87", "parents": [ "f314abc15949b7ee517cce7dd295eee5242b6e04" ], "author": { "name": "Jignesh Mehta", "email": "jigneshm@codeaurora.org", "time": "Thu Feb 16 13:21:22 2012 -0800" }, "committer": { "name": "Jignesh Mehta", "email": "jigneshm@codeaurora.org", "time": "Mon Feb 27 14:23:01 2012 -0800" }, "message": "msm: camera: Fix for inline jpeg corrupted image\n\nEnable IMEM clock for Inline mode. For Inline mode, VFE writes MCUs\nof frame to IMEM and GEMINI reads it from IMEM and encode the image.\n\nSync VFE, IMEM and GEMINI clock to 228MHz. VFE and IMEM are running\nat 228MHz. But Gemini was running at 158Mhz that creates bootleneck and\ngenerat overflow irq error.\n\nAdd VFE_OUTPUTS_JPEG_AND_THUMBANIL operation mode to fix\nFE overflow IRQ error in gemini.\n\nChange-Id: Iaf20892d33d30e7cb8d6ab5fd75551aff260098f\nSigned-off-by: Jignesh Mehta \u003cjigneshm@codeaurora.org\u003e\n" }, { "commit": "a3dcce4029742d8e510c695b902cbe349bf98f44", "tree": "465649c950c00ed6e570eb9e71f236244e068478", "parents": [ "f314abc15949b7ee517cce7dd295eee5242b6e04" ], "author": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Thu Jan 05 19:27:57 2012 +0530" }, "committer": { "name": "Anantha Krishnan", "email": "ananthk@codeaurora.org", "time": "Tue Feb 28 00:45:47 2012 +0530" }, "message": "radio-tavarua: Add commands to configure the FM Search parameters.\n\nProvide commands to get/set the On channel and Off channel detection\nthreshold search parameters to optimize the FM search performance.\n\nChange-Id: Id232ffe2d1231fbd44bb34b4b98263434763b7c0\nSigned-off-by: Anantha Krishnan \u003cananthk@codeaurora.org\u003e\n" }, { "commit": "6ba216846ba1c9a33c31648af48ac8b004ba7373", "tree": "25c6980dc5954b1fbdc9927101cc8e2f053b1fd7", "parents": [ "9389f42d89d5b44c38fc9a550fe87ff15d9ce3e7", "b69202b62234d2a3103117536ed637bde87dcc2b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"radio: iris: Fix the set station issue at boundary\" into msm-3.0" }, { "commit": "1ee4dbf623d54d4c4e0ef29c6c94e3c5891720a4", "tree": "8ad6bfd362d35c771738295c26380dc3fe71a4ed", "parents": [ "7f244319cd187808314f63e0f56c7f0aa1e8e19a", "04592007f7fd2dcff87ed034b8767dcc9550f08b" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat Feb 25 16:41:31 2012 -0800" }, "message": "Merge \"msm-camera: vertical and horizontal view angle of lens added.\" into msm-3.0" }, { "commit": "b69202b62234d2a3103117536ed637bde87dcc2b", "tree": "d68ad671c2c2f862b4b566ffd3aedc373506b445", "parents": [ "68f4b749782e09566b3282377fb59d8e6c4dcde9" ], "author": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Thu Feb 23 19:24:46 2012 +0530" }, "committer": { "name": "Ayaz Ahmad", "email": "aahmad@codeaurora.org", "time": "Fri Feb 24 16:52:47 2012 +0530" }, "message": "radio: iris: Fix the set station issue at boundary\n\nSeek frequency at lower/upper limit is not working\nif selected country is in Europe band with channel\n spacing 50Khz\n\nUse the correct upper limit for Europe band\n\nChange-Id: Icdcb116c24ae9840cc66b1dc2da5fa739a2f89c8\nCRs-Fixed: 338137\nSigned-off-by: Ayaz Ahmad \u003caahmad@codeaurora.org\u003e\n" }, { "commit": "3a7774b2d5e1b3e6967bc2456be77402cd51b239", "tree": "6991a4086815c241d2aa67043a9767b79fc7d85d", "parents": [ "4f11b8178fadbd077e0e5ce7a15b25cc81cb0c44" ], "author": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Fri Feb 10 12:09:50 2012 -0800" }, "committer": { "name": "Deva Ramasubramanian", "email": "dramasub@codeaurora.org", "time": "Wed Feb 22 19:01:52 2012 -0800" }, "message": "msm: vidc: Remove duplicate header files\n\n- Updated the header files in /include/media/msm to mirror the\n header files in drivers/video/msm/vidc/common/.\n- Deleting header files in drivers/video/msm/vidc/common/ as we\n wish to use headers in /include/media/msm going forward.\n\nChange-Id: I58f64e6168d3cc101394414400dd79b82c429ae4\nSigned-off-by: Deva Ramasubramanian \u003cdramasub@codeaurora.org\u003e\n" }, { "commit": "04592007f7fd2dcff87ed034b8767dcc9550f08b", "tree": "384dd189f20d0c5c240883e9a184555635ccca6b", "parents": [ "4f11b8178fadbd077e0e5ce7a15b25cc81cb0c44" ], "author": { "name": "Jeyaprakash Soundrapandian", "email": "jsound@codeaurora.org", "time": "Wed Feb 08 10:29:50 2012 -0800" }, "committer": { "name": "Jeyaprakash Soundrapandian", "email": "jsound@codeaurora.org", "time": "Wed Feb 22 15:30:06 2012 -0800" }, "message": "msm-camera: vertical and horizontal view angle of lens added.\n\nThe application layer expects the view angle of the camera lens.\nThe lens vertical and horizontal view angle of the sensors\nimx074 and ov2720 are added.\n\nChange-Id: I513fbbdf7fdfc5df0969fe54e05c7549123f6bcb\nSigned-off-by: Jeyaprakash Soundrapandian \u003cjsound@codeaurora.org\u003e\n" }, { "commit": "6c3bb3269d8dea04a2fbdc48a5cc267589f7f4f3", "tree": "ca2b1fbcb48fdf0fd746f7c78c31b55c666ecdd8", "parents": [ "b51d07e68c094c8a6a6193d376ac4e94cbf32ba7" ], "author": { "name": "Su Liu", "email": "suliu@codeaurora.org", "time": "Tue Feb 14 02:15:05 2012 +0530" }, "committer": { "name": "Lokesh Kumar Aakulu", "email": "lkumar@codeaurora.org", "time": "Mon Feb 20 18:37:39 2012 +0530" }, "message": "msm: camera: EVB: Add Kernel driver OV5647 \u0026 OV7692\n\nAdd Initial sensor driver support for 5MP OV5647\nand 1MP OV7692 on EVB 1.0 platform.\n\nChange-Id: I8155abe1ff3c388561feed3a032c6603df892e1e\nSigned-off-by: Su Liu \u003csuliu@codeaurora.org\u003e\nSigned-off-by: Lokesh Kumar Aakulu \u003clkumar@codeaurora.org\u003e\n" }, { "commit": "de2d0ee764456f6fc4b77d47a021cae969a9fd6d", "tree": "021427fd86065fcc504f054c6fe5f5a958012e4d", "parents": [ "9621cd122c591042b7263bdfefa46d9f5c257449" ], "author": { "name": "Kiran Kumar H N", "email": "hurlisal@codeaurora.org", "time": "Mon Feb 13 13:42:29 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 07:45:20 2012 -0700" }, "message": "msm: camera: Correct the IOCTL numbers.\n\nTwo camera IOCTL types are enumerated using\nthe same number by mistake. Rectify the mistake.\n\nChange-Id: I48ee8d0ca543c19a3f692ed2ca5baa950edacdf2\nSigned-off-by: Kiran Kumar H N \u003churlisal@codeaurora.org\u003e\n" }, { "commit": "5b25cfe9ad023c10693b1fcf7971eb51cf04f227", "tree": "611f5ccf146dc8d76af1d312275d8042abfe6ed5", "parents": [ "3f28cb3007010491f5566fe58683fd0d7d4eda3e", "0f69eb40055f94b293e9723f1d16ba9786a6eb82" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Feb 16 00:08:24 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Feb 16 00:08:24 2012 -0800" }, "message": "Merge \"radio: iris: Add support for FM Subsystem Restart\" into msm-3.0" }, { "commit": "f21cfaf6381e2330c4e2f619d4cedc72146a8cf7", "tree": "a0b045a8db77c58800673ad065bc359492bea0cf", "parents": [ "d83988058cba594ac2011a4ca0c50097bd24c2de" ], "author": { "name": "Michael Krufky", "email": "mkrufky@kernellabs.com", "time": "Tue Feb 07 01:22:34 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Feb 14 17:20:46 2012 -0200" }, "message": "[media] tuner: add support for Xceive XC5000C\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a26243b0e3726d2b39dc23dd2c8717c52a286af4", "tree": "478ea3c96e683a29a937746c853f5dcf4d323f03", "parents": [ "42194e728f067cde09a95ce522c108756d44c0be" ], "author": { "name": "Hans Verkuil", "email": "hans.verkuil@cisco.com", "time": "Fri Jan 27 16:18:42 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Feb 14 16:38:43 2012 -0200" }, "message": "[media] v4l2-ctrls: add helper functions for control events\n\nMany drivers just support control events, and most radio drivers just need\nto poll for control events. Add some functions to simplify those jobs.\n\nSigned-off-by: Hans Verkuil \u003chans.verkuil@cisco.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e2ecb257eebd8525029f43fcb4f922c4976dba53", "tree": "9ae14febaef5e9c0ebf49472a3f6d30b8da7ac5d", "parents": [ "eb224c29132b4b2fc01ecd19274501af6c3a261a" ], "author": { "name": "Hans Verkuil", "email": "hans.verkuil@cisco.com", "time": "Thu Feb 02 08:20:53 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Feb 14 16:38:13 2012 -0200" }, "message": "[media] v4l2: standardize log start/end message\n\nFor drivers that properly use the v4l2 framework (i.e. set v4l2_dev in the\nvideo_device struct), the start and end messages of VIDIOC_LOG_STATUS are\nnow generated automatically. People tended to forget these, but the v4l2-ctl\ntool scans for these messages, and it also makes it easier to read the status\noutput in the kernel log.\n\nThe cx18, ivtv and bttv drivers were changed since they no longer need to\nlog these start/end messages.\n\nIn saa7164 two empty log_status functions were removed.\n\nAlso added a helper function to v4l2-ctrl.c that can be used as the\nvidioc_log_status callback if all you need to do is to log the current control\nvalues. This is now used by pwc and vivi.\n\nSigned-off-by: Hans Verkuil \u003chans.verkuil@cisco.com\u003e\nCc: Steven Toth \u003cstoth@kernellabs.com\u003e\nCc: Andy Walls \u003cawalls@md.metrocast.net\u003e\nCc: Hans de Goede \u003chdegoede@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "eb224c29132b4b2fc01ecd19274501af6c3a261a", "tree": "8f0315543a978a18ab53617594eb3c8f968e7593", "parents": [ "6e82a6a2a0e895b787f22d28311232cc94fda4b9" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Wed Feb 01 18:29:44 2012 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Feb 14 14:07:46 2012 -0200" }, "message": "[media] IT913X Version 1 and Version 2 keymaps\n\nIT913X V1 V2 keymaps\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a45c0ad51d344dad18c6fb67304b4f87cf0ffd59", "tree": "acdd8cac43a26db7f5d993adffb5e7e6a2634498", "parents": [ "32d7e63c1f4f86ad18404e3f36be99c9910fae9b" ], "author": { "name": "Hans Verkuil", "email": "hans.verkuil@cisco.com", "time": "Thu Nov 24 09:53:43 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Feb 14 13:41:42 2012 -0200" }, "message": "[media] v4l2: add VIDIOC_(TRY_)DECODER_CMD\n\nAs discussed during the 2011 V4L-DVB workshop, the API in dvb/video.h should\nbe replaced by a proper V4L2 API. This patch turns the VIDEO_(TRY_)DECODER_CMD\nioctls into proper V4L2 ioctls.\n\nSigned-off-by: Hans Verkuil \u003chans.verkuil@cisco.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "6cf8a749e2354cf09e564dfa8104f706dca9b437", "tree": "7a208e1bfaea559173d9becccf4ffc2c95a92003", "parents": [ "1268d1e0a2109f40f67830dd92e6a1200eb94ee2" ], "author": { "name": "Jignesh Mehta", "email": "jigneshm@codeaurora.org", "time": "Sat Feb 04 23:40:50 2012 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Feb 14 04:27:31 2012 -0700" }, "message": "camera: vfe32: Enable VFE configuration for inline JPEG encoding.\n\nDuring inline JPEG encoding, one VFE output is routed into\ninternal memory (IMEM) instead of external memory. The JPEG\nencoding hardware (GEMINI) will read from IMEM and generates\nJPEG bitstream.\n\nChange-Id: I12d3600524538ab85021dd8882af0404bddc488f\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\nSigned-off-by: Kevin Chan \u003cktchan@codeaurora.org\u003e\nSigned-off-by: Jignesh Mehta \u003cjigneshm@codeaurora.org\u003e\n" }, { "commit": "0f69eb40055f94b293e9723f1d16ba9786a6eb82", "tree": "81656ce9015e4c8f340451c9fed85db3ada139f4", "parents": [ "f3b464e6e64e8d362eb35201fcf6445d7e233afe" ], "author": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Fri Jan 27 18:01:01 2012 -0800" }, "committer": { "name": "Sunny Kapdi", "email": "sunnyk@codeaurora.org", "time": "Mon Feb 13 23:12:13 2012 -0800" }, "message": "radio: iris: Add support for FM Subsystem Restart\n\nInject FM Disable event when WCNSS resets.\n\n1. When WCNSS crashes, SMD will close the FM port\n2. Schedule a work queue to send RADIO_DISABLED event to upper layer.\n\nChange-Id: I10e4834df507fe39ce58b92e650c1a39ccbf66f7\nSigned-off-by: Sunny Kapdi \u003csunnyk@codeaurora.org\u003e\n" }, { "commit": "70613ecf6cde306b774578b5732f992f662e599a", "tree": "b945cd9e28e5fede02f3cbd855aeb8e738c2ac38", "parents": [ "ed1e2dd6d8a948df8fbc182a1171fbf159b92239" ], "author": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Thu Jan 26 16:24:23 2012 -0800" }, "committer": { "name": "Ankit Premrajka", "email": "ankitp@codeaurora.org", "time": "Fri Feb 10 14:19:30 2012 -0800" }, "message": "msm: camera: support exposure metering and HDR snapshots\n\nWith this change we achieve multiple things related\nto correct HDR functionality. First, we do not\nalways configure ping and pong to be the same buffer in\ncase of the snapshot mode. This would help support taking\nmulitple snapshots. Second, we support for logic to skip\nframes in case of snapshot, a necessity for the exposure\nmetering feature. Third, we support post processing\ndivert of both snapshot and thumbnail buffers to be\ntaken from either mctl queue or video queue, to be\ndetermined at runtime.\n\nChange-Id: Ibcf2bbfc171b2686ca44e6366feadf435368fa5f\nSigned-off-by: Ankit Premrajka \u003cankitp@codeaurora.org\u003e\n" }, { "commit": "7476824f8b57ade39dacd7b3f2b084f19fc7e650", "tree": "4d8f4f507f8efd4d9f25c60c2b87bfd96c002d1a", "parents": [ "6e53da890bbb130b6326394a58c6fe9d965c01eb" ], "author": { "name": "Shuzhen Wang", "email": "shuzhenw@codeaurora.org", "time": "Fri Sep 02 17:38:01 2011 -0700" }, "committer": { "name": "Sreesudhan Ramakrish Ramkumar", "email": "srramku@codeaurora.org", "time": "Thu Feb 09 09:06:37 2012 -0800" }, "message": "camera: vfe32: Enable composite stats irq\n\nAll stats are generated at roughly the same time\nonce per frame. They can be composited together and notify\nthe user space at once.\n\nChange-Id: I0bd828473fa705bef58ecdba8b18a365235bfca0\nSigned-off-by: Shuzhen Wang \u003cshuzhenw@codeaurora.org\u003e\n" }, { "commit": "db38951cce88eae36909143291545a59db4efa59", "tree": "dbf5be5a2019c9d0e747295ff05e184113a52ad2", "parents": [ "260a8f7b06c9f8fba20bea7cd76281a533241076" ], "author": { "name": "Manjunath Hadli", "email": "manjunath.hadli@ti.com", "time": "Fri Dec 23 03:28:44 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed Feb 08 10:46:54 2012 -0200" }, "message": "[media] davinci: vpif: remove machine specific header file includes\n\nremove unnecessary inclusion of machine specific header files mach/dm646x.h,\nmach/hardware.h from vpif.h and aslo mach/dm646x.h from vpif_display.c\ndriver which comes in the way of platform code consolidation.\nAdd linux/i2c.h header file in vpif_types.h which is required for\nbuilding.\n\nSigned-off-by: Manjunath Hadli \u003cmanjunath.hadli@ti.com\u003e\nCc: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\nCc: LMML \u003clinux-media@vger.kernel.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4ebd10cc69770b69d370cc4bf1bd962d6773475e", "tree": "0c75a6d3a32225aef8c099ee648e5afc2168edce", "parents": [ "13d12417f711a1c4d50e2609bd2d4669bba940ec", "3fb6bc2ae5081e864566ee0335281d07248f572d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Feb 05 07:37:49 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Feb 05 07:37:49 2012 -0800" }, "message": "Merge \"msm: rc: Rename TSOP IR Receiver Driver\" into msm-3.0" } ], "next": "8f68c594b5cce0246dec454e7d911eb74a4d402c" }