)]}' { "log": [ { "commit": "2e1d752be81c1eee283738ffa21afb179ae1cc1d", "tree": "8bb63cf1404aadbffc3905454e6a1fbd433635c2", "parents": [ "a3fe8df5d61bf52c971da8731ba536773c26c86d" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Fri May 25 15:08:40 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue May 29 11:18:05 2012 +0530" }, "message": "ASoC: wcd9304: Fix wrong sample rate issue in RX2/RX3 channels\n\nThe default value of RX2/3_B5_CTL is wrong and resulting in wrong\nsample rate playback for headphone.\n\nChange-Id: Idf7d9bce1ee344677c48353fb3fe6a8f8bcc42ab\nCRs-Fixed: 361414\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "83c81f62fa5a0ae50f30300474a46315f322d37b", "tree": "5265a8dc4e96ef43e9e230afee8904a975e1854f", "parents": [ "c3f3b0321016480b66def830deff50cc21a67910" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri May 18 16:09:05 2012 -0700" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Thu May 24 18:17:15 2012 -0700" }, "message": "ASoC: MSM: Add Support for WCD9304 codec version 1.1\n\nRegister and initialize the approriate device for WCD9304 codec\nversion 1.0 and version 1.1. Query version information from codec\nto be used from other drivers.\n\nChange-Id: I64c2dfe2dfc786c6b799f4698c1a36f52115880a\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "ba4ea6eccabe48e04a43f5f0da17a33743b24e89", "tree": "61f06bcd094dbf1c288ad8afa184c97d4b592b4a", "parents": [ "78468e8392a8d5766516a45b6f1c74cba0046283" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed May 09 15:59:28 2012 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon May 14 08:09:50 2012 +0530" }, "message": "mfd: pm8xxx-misc: Add API to control HSED BIAS lines\n\nQualcomm PMIC\u0027s support 3 HSED BIAS lines which as used\nas Micrphone bias. The API adds ability to control (enable/disable)\nthese bias lines.\n\nCRs-Fixed: 359206\nChange-Id: If7603028bb040c3679c042307b8950bbd3f12c4d\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "7cb31935eac24648db4facfbe91afb53cfae3063", "tree": "3ebbbca21b8a2c9a53c4ef2434b6f0e3ea792be1", "parents": [ "2c653ad630abce4b447292fbfb20d48c2136a13d", "c579020876e8546210cda68fe5863858072cf40c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sat May 12 11:58:02 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sat May 12 11:58:02 2012 -0700" }, "message": "Merge \"mfd: PM8018: Add GPIO digital voltage level definitions\" into msm-3.0" }, { "commit": "0d2eb0004f90e7e80286b7fc6ebd285d76af1bbb", "tree": "74bf2e83a7c3d75a60d684f9cc4dce702bd7ee3b", "parents": [ "bf6596c458d98fecd232f05ba239d1d14ee5f285", "dfe0f57f55b1028bd8f60e5ff02fda1e819f37ce" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 07 06:53:36 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 07 06:53:36 2012 -0700" }, "message": "Merge \"mfd: pm8038-core: Add support for speaker power amps on pmic 8038\" into msm-3.0" }, { "commit": "aa34315f87cf9181cab4b11aa6563fae654c61f3", "tree": "58d5420be534777ae7b5ff1eb9708a8924634559", "parents": [ "e9449a1e67164050f0b4bc165ee583490388b46a", "656b7a293b0427dd3091ad27b0869c7f5b2465ba" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon May 07 06:53:26 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon May 07 06:53:26 2012 -0700" }, "message": "Merge \"mfd: pm8xxx-spk: Add support for class D speaker amplifier driver\" into msm-3.0" }, { "commit": "38549c20e7b26cb0e94704c1f69f62000402d679", "tree": "c5724cee875789e8b7b337564d28e823520e0eec", "parents": [ "e377c9810a607309128dccff9ffbd11d3c3ea597", "e88f2466eb23260a2ab68b285215074c2d4eb37d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu May 03 00:49:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu May 03 00:49:37 2012 -0700" }, "message": "Merge changes Icf6ec2fa,I9c09bc82 into msm-3.0\n\n* changes:\n power: pm8921-bms: enable/disable FCC learning feature\n power: pm8921-bms: fix shutting down early at cold temperature\n" }, { "commit": "e88f2466eb23260a2ab68b285215074c2d4eb37d", "tree": "3376f13fef312c0a4836ab3b94e6127448cbad41", "parents": [ "b40b96f5c993a602e6a8d035dd815ddd57057915" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Apr 25 18:22:38 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed May 02 09:55:30 2012 -0700" }, "message": "power: pm8921-bms: enable/disable FCC learning feature\n\nThere are some configurations which do not want battery full charge\ncapacity (FCC) learning.\n\nProvide means to enable/disable the FCC learning feature.\n\nChange-Id: Icf6ec2fac867d62c3c1eeb882d66d57523312b5b\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "2776af1ee46a732b4392119a8291656d015368e3", "tree": "34a0b7ba94a923dd0f341e00a32e45fa61f8ce34", "parents": [ "db4bc8162185a65f71d7a144d1d1db7c97b94d47" ], "author": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Apr 27 16:59:39 2012 -0700" }, "committer": { "name": "Bhalchandra Gajare", "email": "gajare@codeaurora.org", "time": "Fri Apr 27 18:08:11 2012 -0700" }, "message": "ASoC: WCD9304: Fix register defaults for clock select\n\nOn any codec path bringup and teardown, the external clock\ngate in digital block is not required to be changed.\nFix by setting the register value as default and not change\nduring bringup or teardown\n\nChange-Id: Ie2c57cc9814f5e85bcc755679a29ed36d7f199a6\nSigned-off-by: Bhalchandra Gajare \u003cgajare@codeaurora.org\u003e\n" }, { "commit": "c579020876e8546210cda68fe5863858072cf40c", "tree": "4e4d6d745acc5a7120a8cf4f9bd5c8966b3c34f6", "parents": [ "8a5e928f3d3d4c937f6faa2896668a2168dbdc38" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Apr 26 15:24:11 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Apr 26 15:55:50 2012 -0700" }, "message": "mfd: PM8018: Add GPIO digital voltage level definitions\n\nPM8018 GPIOs need default voltage level to initialize.\nThe voltage level is used during the defalut configuration\nsetup during boot up and at any time when gpio needs to be\nreconfigured.\n\nAdd these voltage level definitions so that they can be used\nfor such PM8018 GPIO voltage level configuration.\n\nChange-Id: Ifc5e77e976826e3493a972f9b0f6a412709acb33\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "f9383d55837549e405479abbd7457b07b24b083b", "tree": "60e6016c1ffcecafaaac47e3b0a1a176ea5d41b2", "parents": [ "8a5e928f3d3d4c937f6faa2896668a2168dbdc38" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Apr 19 09:42:49 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Apr 26 14:46:50 2012 -0700" }, "message": "hwmon: pm8xxx-adc: Add BATT_ID_THERM configuration\n\nPM8018 ADC arbiter uses a single AMUX8 channel to\nread either battery id or battery tempertaure. On\nexisting platforms these pins are grounded.\n\nAdd default configuration to read battery ID. If clients\nneed to read the battery temperature instead, follow the\ninstructions in the comments for the ADC channel listing.\nClients would need to update the scaling function in the\nchannel configuration to use the appropriate battery\nthermistor scaling function.\n\nCRs-Fixed: 350907\nChange-Id: Ia3a8054c9be1e90d2076fd583ef8480353b78c6d\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "1ba115da95497e6aec86600709b51db2679094fd", "tree": "61aeed603c9e3d93d0f3bad3f2694bef2055f7bd", "parents": [ "eac0d1edf21ab5a46867fbfea5af621227738083" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Apr 19 15:42:41 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Apr 23 15:48:32 2012 -0700" }, "message": "mfd: PM8018/PM8921: Update PMIC board revision information\n\nTo incorporate the release of new revisions of the PM8921\nand PM8018, add the new revision numbers to the database.\n\nChange-Id: I5073802131aeed51795df77ac065878eeff34461\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "dfe0f57f55b1028bd8f60e5ff02fda1e819f37ce", "tree": "523e5dce29595a6236dc9a91103980a6e06efbf8", "parents": [ "656b7a293b0427dd3091ad27b0869c7f5b2465ba" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Mon Mar 19 02:45:03 2012 -0700" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Apr 18 07:27:29 2012 +0530" }, "message": "mfd: pm8038-core: Add support for speaker power amps on pmic 8038\n\nAdd speaker amps as a sub device to pmic 8038. This will also\ntake care of filling platform data for speaker driver\nwhich comes as part of pmic pdata.\n\nChange-Id: Id5c163389e99153336536e364ef116d9b90752e2\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "656b7a293b0427dd3091ad27b0869c7f5b2465ba", "tree": "d39cf0443dcb8e1739fe55a818de6307e8f1cda2", "parents": [ "545341ab72fdadf781fe9cd1c66110dc9cbfa960" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Thu Mar 15 00:27:42 2012 -0700" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Apr 18 07:27:22 2012 +0530" }, "message": "mfd: pm8xxx-spk: Add support for class D speaker amplifier driver\n\nThe driver adds support for configuring the following parameters for\nexternal pmic speaker amp driver\n1. Gain\n2. Mute/Unmute\n3. Speaker enable/Disable\nThe above operations are supported by driver by exported apis\nfrom kernel space.The Machine driver from ALSA would use these\nto configure speaker.\n\nChange-Id: I9817f5d5c2952ca423b84f35162a842123e4d413\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "f868a1fcd6ecfe243a8e489693e1a0972217fc57", "tree": "1f499a55ed1fadccfad855ea67f2551fb73582e5", "parents": [ "d7e20e2a2de58254a9f6dd11e3e9b9622bda38c3" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Mon Mar 05 10:07:44 2012 -0800" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Tue Apr 17 00:46:40 2012 +0530" }, "message": "ASoC: wcd9304: Pull in pending fixes for sitar.\n\nFix Lineout and DMIC configurations. The configurations are similar\nto tabla codec driver and hence pull in changes to sitar driver.\n\nChange-Id: Ia00359e6f8888c08365b85423197821fc16f963b\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "d7e20e2a2de58254a9f6dd11e3e9b9622bda38c3", "tree": "59a62e203f350d0862b1907ae9aeb91c1a0e4b8b", "parents": [ "0f916abba2146de1c03a098be1c89094df7fe485", "ded189bb51de5b214a159c3f67c21f58c00bda3a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Apr 16 09:34:09 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Apr 16 09:34:09 2012 -0700" }, "message": "Merge changes Ic67b798a,I0f2b440b,Iffb6a7c8 into msm-3.0\n\n* changes:\n power: pm8921-bms: account for capacitive drop\n power: pm8921-bms: Add connector resistance\n power: pm8921-bms: fix the units of batt_temp for rbatt\n" }, { "commit": "ded189bb51de5b214a159c3f67c21f58c00bda3a", "tree": "eb283bc5429b5b4683260ee96d751e0a8423167d", "parents": [ "baffba4e76513ce9add79071382dbc9c91d7bba2" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Mar 30 10:12:28 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Apr 13 01:00:00 2012 -0700" }, "message": "power: pm8921-bms: account for capacitive drop\n\nAs the battery discharges, we need to account for the voltage drop across\ncapacitance in the battery. This voltage drop can be simulated using\na resistance in series with the battery such that it increases as state of\ncharge of the battery decreases.\n\nAdd parameter to account for this resistance in the profile tables.\n\nChange-Id: Ic67b798ae8f480d8f42d9321e3847c4294bf7db3\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "baffba4e76513ce9add79071382dbc9c91d7bba2", "tree": "38fa981c46612c6112f0e68fe4f03042834077d0", "parents": [ "12a891c4e875c136ebeebd0f1510cf0d2e4195d1" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Mar 22 14:41:10 2012 -0700" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Apr 13 00:59:59 2012 -0700" }, "message": "power: pm8921-bms: Add connector resistance\n\nThe current software does not take in to account the resistance\nintroduced because of the battery connectors and rsense. This\nneeds to be accounted for when the battery resistance is\ncalculated.\n\nChange-Id: I0f2b440bae8168868b26f35c8ec59a21d4906f0f\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "bb1ed5ec370e48381270238ee1563bc7daa6578b", "tree": "2235ff95e238e0e4a32c3a8051932f7c52ee7126", "parents": [ "932410e2e01c52108e6d8e1df3b6c3db135f3205", "f6fdcaa0ca320e7b8c19e5edd343629c94e9cdb0" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 18:49:18 2012 -0700" }, "message": "Merge \"power: pm8921-bms: scale rbatt with temperature and soc\" into msm-3.0" }, { "commit": "d83cad4f0b98c783634a90835755ea55e6679279", "tree": "f0b4711e763b176d6d8f8716a4136eb81f7c7400", "parents": [ "e288a9f4773fb4f0bba72a1de9f0266ea45e4f5e", "135f3e094ea59c05802389c3b7ecc27074f9209c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:37 2012 -0700" }, "message": "Merge changes Idd7662db,I1fbefb35 into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Make pm8xxx_preload_dVdd a no-op for PM8901 rev 2.3\n mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n" }, { "commit": "cf491a6d6a0f89a6020547d799bc2656c4993e99", "tree": "76f3607d1cc80d590d428aae6dd2c6ccf60ad72d", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e", "aae56f94a1e1409a5bdaf15860dc0c9924679425" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Apr 06 09:07:25 2012 -0700" }, "message": "Merge \"pm8xxx: misc: correct typo for aux clock division\" into msm-3.0" }, { "commit": "e41d1db1e9e96a1f7b6eecbe9b84cc1092ce3f81", "tree": "5c9ce5d601fd2c9a2f97179785803ecdbcc5d4d0", "parents": [ "c62852fc5c12cd1bacae298abd4552ad172ab77e" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 10:08:10 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Apr 05 11:21:30 2012 -0700" }, "message": "mfd: pmic8901: Add revision ID values for PM8901 rev 2.2 and 2.3\n\nAdd revision ID values to identify PM8901 rev 2.2 and rev 2.3.\nAlso modify the version printing in the pmic8901 driver to utilize\na human readable format.\n\nChange-Id: I1fbefb35584ec19dfe0983eaff3c5192f1762392\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "aae56f94a1e1409a5bdaf15860dc0c9924679425", "tree": "f9d5b45a95ece165b364cc50761629e45ef23731", "parents": [ "d487812cb7bb16bd4260d9505dc697d001afe24a" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Apr 04 11:07:43 2012 -0700" }, "committer": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Apr 04 11:12:05 2012 -0700" }, "message": "pm8xxx: misc: correct typo for aux clock division\n\nTypo where 0 should be O in \"XO\"\n\nChange-Id: I23320a360e62e3027f79fffcabd0a7b4c7f2904c\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "f6fdcaa0ca320e7b8c19e5edd343629c94e9cdb0", "tree": "e565a3825871c18a66de826497cddb02f9a9275f", "parents": [ "26417da62764b0acdd5d5b9bc9237a024d10fad8" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Feb 27 00:10:10 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Fri Mar 30 16:37:33 2012 -0700" }, "message": "power: pm8921-bms: scale rbatt with temperature and soc\n\nThe rbatt was observed to change with battery temperature and the state\nof charge of the battery. Update the BMS driver and the battery data\nto include and use a rbatt table indicating its changes w.r.t temperature\nand state of charge.\n\nOn similar lines provide api for other systems to query battery resistance.\n\nChange-Id: I681675db537b70919e6e0437bd400ce53bf97096\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "2e5bbd87af6e20b39c09da6f8bb94d7f6f7d5105", "tree": "a0dd15c41ebc8519f802ffac9c79de145c8c9669", "parents": [ "3eff85619c3bdf125aa22c3e54accf39ef946345", "74730c7d870da7be00b94e17f3b46a538005c078" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 29 14:17:01 2012 -0700" }, "message": "Merge changes I3984d747,I9a436f63 into msm-3.0\n\n* changes:\n msm: board-8930-pmic: Add default configuration for LED anode power source\n power: pm8921-charger: Add feature to use charger LED\n" }, { "commit": "d7cf2e931cea51c7ff0a40e6b930edf99b320d8e", "tree": "d8040df3feeffd18876a6a59ec92cae1a7f1e50d", "parents": [ "ad7787fa78c87368f413a30debb0e1e1fdb25b0c" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Mar 19 19:38:23 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Tue Mar 27 18:21:44 2012 -0700" }, "message": "ASoC: wcd9310: Add plug detection through mechanical switch\n\nUse mechanical switch on the phone jack to detect headset/headphone\ninsertion and removal. Mechanical switch is beneficial to avoid fake\nbutton press and high impedance microphone headset detection.\n\nCRs-fixed: 341402\nChange-Id: Idffba14316ab25e07736d1b7385f0edb16216089\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "d674a5186034805f94e2077c9a3c7068d50769dd", "tree": "84f5f38105772303cfc3d7f04514462a011b5f73", "parents": [ "9eb1d41c6b571cdfea8177c490cfb297ae362f65" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Mar 15 14:06:04 2012 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Mar 26 11:31:04 2012 -0700" }, "message": "power: pm8921-charger: Add feature to use charger LED\n\nAdd a mechanism to configure the power source of\nthe charger indicator LED anode on the PM8921.\nThe configuration is specified using platform data.\n\nChange-Id: I9a436f634ddfd5d1822f1fc8beab4936fa8bb61d\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "d3e0aab89fa66640f5f712c2545088d4326d945e", "tree": "3ae662c832b7a029be1a95e8e5cdf86fde1d5c79", "parents": [ "de63ad6cb4e02094817641a8a3b6073eb37437ca", "cb6d300f6c6d6fd5c6407689af4d41680788352a" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Mar 25 00:56:45 2012 -0700" }, "message": "Merge \"hwmon: pm8xxx-adc: Fix Buffer overflow\" into msm-3.0" }, { "commit": "cb6d300f6c6d6fd5c6407689af4d41680788352a", "tree": "6b024957257b03cfae0a25b64af5f0894e7cd3bd", "parents": [ "f1d53c43022bdd9b00580689a1ea71490841a934" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Mar 15 10:44:11 2012 -0700" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Mar 22 22:01:42 2012 -0700" }, "message": "hwmon: pm8xxx-adc: Fix Buffer overflow\n\nUse the maximum number of channels added in the\nADC entry list in the board to check for channel\nvalidity. This patch also adds additional checks\nin the driver to validate the requested channel.\n\nCRs-Fixed: 339631\nChange-Id: I347f0d39a00b6ee12976ec2c24843626b54617d4\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "f241e160314a8201b116b934bc4e107ff32e6f30", "tree": "9dd8fc1e7c2ed99006f412177e8780dacc522214", "parents": [ "3678d986fd9303b94ac29223afc2967dd8e02e18", "0332483368f45d2c8b31a6db974992bcaeadb20c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Mar 22 15:52:13 2012 -0700" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Mar 22 15:52:14 2012 -0700" }, "message": "Merge changes Ibfd4ba25,Ifc6054cd into msm-3.0\n\n* changes:\n ASoC: wcd9310: Add high impedance headphone detection support\n ASoC: jack: Add API report sock jack without DAPM sync\n" }, { "commit": "0332483368f45d2c8b31a6db974992bcaeadb20c", "tree": "6d96ef3b8be0290819a05b3c28e7e7b2ff74fc22", "parents": [ "a909e1258f62e77235840db1bb3d2c0ff066a12c" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Mar 19 19:36:16 2012 -0700" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Wed Mar 21 19:33:02 2012 -0700" }, "message": "ASoC: wcd9310: Add high impedance headphone detection support\n\nIf HPHL and HPHR have relatively high impedance, internal MBHC HPHL\ntrigger cannot trigger so results in headphone/headset detection\nfailure.\nUtilize MIC trigger as well as HPHL trigger in order to detect headphone\nand headset which have high impedance on headphone line.\n\nCRs-fixed: 339390, 337590, 336847, 334339\nChange-Id: Ibfd4ba254197233f2b5e253f5d1fa2a98c848c97\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "39914be2089ecb76627ba803903e5444886f1337", "tree": "5fe8381a1c26fefae3ee0b88fbe1811980a9dbbe", "parents": [ "485eeccaf7432832efb3dbcf93c934f7e7b39931" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Mar 20 09:47:21 2012 -0700" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Mar 20 10:07:04 2012 -0700" }, "message": "mfd: pm8018-core: Add PMIC thermal alarm device\n\nRegister a PMIC pm8xxx thermal alarm device in the pm8018-core\ndriver. This device will allow userspace to monitor the\ntemperature of the PMIC die.\n\nChange-Id: I888c0737dd991da9eaec039b20b381a2bfd7923c\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "40491ce8d0543bb0d81d855b7742f078a404d85f", "tree": "6f836691142d4b870e2ef6970d2221e3b186d6a0", "parents": [ "f15a5d72151f510fee354f4e426079d9a6cad4c1" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Mon Nov 07 11:38:54 2011 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Mar 14 10:41:08 2012 -0700" }, "message": "power: pm8921-charger: implement ir compensation\n\nThe charger hardware has a +/-30mv error for vdd_max settings. This\nmeans that when vdd_max is set to 4200mV the actual voltage on vph_pwr\nline could range from 4170mV to 4230mV. This further means that when\nconstant current to constant voltage transition happens, the battery\nmay not be charged up to 4200mV - leading to an premature end of charge.\n\nFix this by implementing periodic IR compensation. On a device measure the\nresistance from the vbat terminal to the ground by shorting the +ve and\n-ve of the battery terminals (without a battery), this will be referred to\nas rconn in the description. In the code it is rconn_mohm to reflect the\nunits.\n\nThe voltage at battery terminal will be\nVbat(terminal) \u003d Vbat(xoadc) + Ibat * rconn\nwhere Ibat is the current flowing out of (or into if -ve) of the battery.\n\nVbat(xoadc) and Ibat can be obtained by using the override mode of the\nbms. So Vbat(terminal) can be deduced and compensated by increasing\nvdd_max. This also helps in increasing constant current mode thereby\ndecreasing constant voltage mode and decreasing the overall charging time.\n\nThe value of rconn will be specific to a PCB layout, it is\npassed in from platform_data.\n\nChange-Id: If8df93333ca6b0bad35505895a4fc5577562fadd\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "7a05bd74846af780f2af056c022ebfb6f51dfcca", "tree": "efb1edcba52edc7f8bf7b7e5a7a7e3467a6d0650", "parents": [ "37c733d885483a157a9523e60434ce699ecc0d4e" ], "author": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Tue Feb 21 01:18:46 2012 -0800" }, "committer": { "name": "Stephen Boyd", "email": "sboyd@codeaurora.org", "time": "Thu Mar 08 12:04:23 2012 -0800" }, "message": "pm8xxx: Remove __exit marking on pm8xxx_irq_exit()\n\nThis function is called from more places than just exit\nfunctions. Also remove the _init/__exit markings from the header\nfile as they\u0027re not necessary in function prototypes.\n\nWARNING: vmlinux.o(.devinit.text+0x7840): Section mismatch in\nreference from the function pm8038_add_subdevices() to the\nfunction .devexit.text:pm8xxx_irq_exit()\nThe function __devinit pm8038_add_subdevices() references\na function __devexit pm8xxx_irq_exit().\nThis is often seen when error handling in the init function\nuses functionality in the exit path.\nThe fix is often to remove the __devexit annotation of\npm8xxx_irq_exit() so it may be used outside an exit section.\n\nChange-Id: I0d2e285a03958e0fe68af48df94523aa1d0476c0\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\n" }, { "commit": "0f8ade328b117d45c42f21fda7ef53b11dc933c7", "tree": "a4c0e9619e45e02b7017436b694e6b62dc2d5cb3", "parents": [ "c5e7504029c106f9bfb0bed4742238f5ed165517" ], "author": { "name": "Kuirong Wang", "email": "kuirongw@codeaurora.org", "time": "Mon Feb 27 16:29:45 2012 -0800" }, "committer": { "name": "Kuirong Wang", "email": "kuirongw@codeaurora.org", "time": "Mon Mar 05 13:42:46 2012 -0800" }, "message": "ASoC: wcd9310: Add the compander support to wcd9310\n\nThe compander system is intended to increase the dynamic\nrange of an input signal. But for the wcd9310 codec,\nthis feature is to use companding in a novel way in the DAC\nconverter path to increase the signal noise ratio.\n\nThe change is to add the compander support to wcd9310\ncodec. The dynamic compander enable/disable during stream\nplayback is not supported.\n\nChange-Id: I916a5e4cc0a06516a691bbdcdf0103dcb7b0398c\nSigned-off-by: Kuirong Wang \u003ckuirongw@codeaurora.org\u003e\n" }, { "commit": "9ec5583444c509291526c9aa8479a5b8324ee6ae", "tree": "a19e6bbd38305283f3a39634213731c5b2403142", "parents": [ "4d3c7ef35efd357e087c0171ac4c6909b2348996", "c9857ca398776beaba55ebe9be64f4019760d645" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 02 12:21:31 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 02 12:21:32 2012 -0800" }, "message": "Merge changes I1bfdc1f4,I09735f6e,I57f3333e,I37949113,Ic9e9ca4e into msm-3.0\n\n* changes:\n power: pm8921-bms: add api to simultaneously read vbatt and ibatt\n power: pm8921-bms: calibrate xoadc more often\n power: pm8921-bms: add protection against divide by zero\n power: pm8921-charger: fix 10mv error on vdd_max\n power: pm8921-charger: fix reverse boosting\n" }, { "commit": "bbbc99ac4de94245e96b467dda18e7da70fb4268", "tree": "b32bcd642e62536628df28f128b6a3452fd8256b", "parents": [ "24a877e1e702f5b72763a5618ef16f444c0d0bfa", "63c3bcc5f2209d703e7911df93aa1fcd70edf74d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Mar 02 12:21:30 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Mar 02 12:21:32 2012 -0800" }, "message": "Merge changes I810ffac4,If881eb08 into msm-3.0\n\n* changes:\n msm: board-8960-pmic: Add platform data for PWM driver\n mfd: pm8xxx-pwm: Add feature to configure LPG DTEST mode\n" }, { "commit": "c9857ca398776beaba55ebe9be64f4019760d645", "tree": "7840c52281abb6087d8eff33de551da1d1510df9", "parents": [ "1b8e8293b691f873f4c47b3184c153510ef894b5" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Feb 07 15:56:06 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Feb 29 21:02:37 2012 -0800" }, "message": "power: pm8921-bms: add api to simultaneously read vbatt and ibatt\n\nThe compensation algorithms need simultaneous readings of the battery\nvoltage (vbatt) and the current flowing through it (ibatt).\n\nOne needs to put the BMS in override mode to get simultaneous vbatt\nand ibatt readings.\n\nNote that since one would need to sleep for 20 milliseconds after the\nBMS is put in override mode the spin_lock is changed to mutex in the bms\ndriver.\n\nChange-Id: I1bfdc1f4e84d5d3c2cd6502dd66afdfba650cc0d\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "1b8e8293b691f873f4c47b3184c153510ef894b5", "tree": "259cc4ed1344b05d316de3d4d67ace84a25edd19", "parents": [ "bbae8831f407d2d701e5ac74be3104fb86f8ccfe" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jan 17 11:01:44 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Feb 29 21:02:37 2012 -0800" }, "message": "power: pm8921-bms: calibrate xoadc more often\n\nImprove the values of the battery voltage read from xoadc by periodically\ncalibrating the xoadc.\n\nThe xoadc needs to be calibrated every time a charger is plugged in\nor plugged out. This is because the reference voltage shifts a bit\nwhen a charger is plugged in.\n\nProvide an api to calibrate xoadc. This api will be used by the charger\ndriver.\n\nCRs-Fixed: 334825\nChange-Id: I09735f6e5c5d4ab8be379fe001fff81c25c95397\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "b0a0fa5b4f8bfa8f8f523c845d323066e674e8ba", "tree": "7eb190f59c1766c53a566273fccfeb54e23865aa", "parents": [ "704a644e6526a3ca0ca91839b35c3466167a6bd0" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Thu Feb 23 16:18:44 2012 -0800" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Wed Feb 29 16:39:25 2012 -0800" }, "message": "mfd: pm8xxx-pwm: Add feature to configure LPG DTEST mode\n\nPM8921 LPG banks can be configured to connect to DTESTx.\nThese DTEST lines can be used to observe LPG output.\nProvide a feature that allows to enable DTEST modes for\na given LPG channel.\n\nCRs-fixed: 337902\nChange-Id: If881eb089aea2a66f7324af8ac906405eef4f81a\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "b86c3477a80290e8b7d0b98e8e0c77da41fd5f6b", "tree": "9a36dc0885b98286f2d2614eea3160994f81914b", "parents": [ "b1aeae22ffd25d66004eaef1d2d1be10ba6b89d7" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Feb 15 08:31:52 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Feb 29 15:31:34 2012 -0800" }, "message": "ASoC: wcd9304: Add driver for Sitar codec.\n\nAdd support for 5 RX and 4 TX Slimbus channel support.\nHeadphone/Earphone/4 DMIX/2 AMIC and IIR1 support\n\nChange-Id: I1b7ad5e5fd9d87aab80d6533503371e63df8cc0a\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "b1aeae22ffd25d66004eaef1d2d1be10ba6b89d7", "tree": "f86ebacb6154d48d8dd4642c2d9a64333f4767d1", "parents": [ "704a644e6526a3ca0ca91839b35c3466167a6bd0" ], "author": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Feb 15 08:29:28 2012 +0530" }, "committer": { "name": "Asish Bhattacharya", "email": "asishb@codeaurora.org", "time": "Wed Feb 29 15:31:15 2012 -0800" }, "message": "ASoC: wcd9xxx: Move to a generic framework for codec core driver.\n\nThe current core assumes TABLA as the only codec driver registering.\nTo support single binary for multiple targets its essential that\nwe remove this restriction and move to a generic framework\nto support multiple codec. This can be done by moving all codec\nspecific code to dedicated codec driver and use core driver to probe\nthe codec based on slimbus device id and do generic setup for the\ncodec. This also helps to have same boards with different flavours\nof codec variants.\n\nThe WCD9XXX family of codecs share the initial codec register\nmapping which holds the Slimbus device id to identify the\ncodec existing on the target.Core driver now registers the\ncodec device based on this check.\n\nChange-Id: I4c43d5f04c20696f4f5138411460681ec7879d34\nSigned-off-by: Asish Bhattacharya \u003casishb@codeaurora.org\u003e\n" }, { "commit": "35e1187ef9660b4780972f6004e02d7556e6810f", "tree": "9c0d27ffa39cede2adaa9a76f94e2b65b9d177f9", "parents": [ "8f2601b9af892ccdae0a4b24d369a70f8f53342e" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Feb 17 17:40:42 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Feb 27 10:50:41 2012 -0800" }, "message": "msm: 8960/8064: robust battery detection\n\nTo ensure proper battery id dectection on LiQUID and MTP\nuse machine_is_msm8960/8064_mtp/cdp to determine which\ncalibration data to use for battery. If platform is\nunknown fall back on regular battery id detection.\n\nChange-Id: I2f5629572d1e5fcac0a2feb114947b91a96f3bf0\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "8f2601b9af892ccdae0a4b24d369a70f8f53342e", "tree": "b9352f07838e102f06d868638df33abe667c5f12", "parents": [ "f314abc15949b7ee517cce7dd295eee5242b6e04" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Feb 14 22:31:07 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Feb 27 10:50:22 2012 -0800" }, "message": "power: bms: add desay calibration data\n\nAdd the calibration data and battery ID information for the\nDesay 5200 mAh battery which is used in LiQUID platform\ndevices.\n\nChange-Id: I19ff1251ee3e71fa71d4fa0c83143d4b7667a80c\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "490f9a35301951572efa44f6b1bf6900af5a96fb", "tree": "18bea8b167407efd8fb07b73ff7c42d731da8a68", "parents": [ "642756f4efa0af0cd9ae7475214f6b6751a39337", "525da18ed57e6bd13c1f7067e193b19d77b8b470" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 22 01:00:01 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Feb 22 01:00:12 2012 -0800" }, "message": "Merge \"regulator: pm8xxx-regulator: Add control for boost regulators\" into msm-3.0" }, { "commit": "4c994c91e73b8b23ff0d346a05dd7fad658e045f", "tree": "17810b6a15e94c27cc6af92a2a4a95be9a12916b", "parents": [ "3c40fc500812101f391515699b19cf7839b2c92a" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Feb 15 09:56:15 2012 -0800" }, "committer": { "name": "Mohan Pallaka", "email": "mpallaka@codeaurora.org", "time": "Mon Feb 20 12:14:48 2012 +0530" }, "message": "mfd: pm8xxx-misc: Add function to write aux clock register\n\nThis call configures the XO to the MP3 clocks. These\nclocks route over PMIC gpios and are used as an independent\nclock source for MP3, haptics.\n\nChange-Id: Ib95f277eae8bcb9a7e9da12fc5fe2baec4e72493\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "525da18ed57e6bd13c1f7067e193b19d77b8b470", "tree": "f394112138abfd402c92c7ba5356a14417efeedd", "parents": [ "1268d1e0a2109f40f67830dd92e6a1200eb94ee2" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Feb 13 10:36:37 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Feb 14 10:26:11 2012 -0800" }, "message": "regulator: pm8xxx-regulator: Add control for boost regulators\n\nAdd the functions required to control boost regulators on PMIC\nPM8XXX chips. These regulators would typically be used to output\n5.0 V for USB OTG but may be programmed for voltages between\n4.0 V and 5.55 V.\n\nChange-Id: I016b9ffa41853c18fda919048eb06002d9ca0c64\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "9c79f13b0e0a89f1e50266b8b7f9e0d2daac5da0", "tree": "6749a1ca2445ea9070b74abcadf2cf07e96f01e4", "parents": [ "6526463a7f18eb0a51e903dc8024f602414845ae" ], "author": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Mon Nov 28 11:18:57 2011 -0800" }, "committer": { "name": "Bharath Ramachandramurthy", "email": "bramacha@codeaurora.org", "time": "Sun Feb 12 13:48:19 2012 -0800" }, "message": "ASoc: msm: Add support for slimbus shared channel.\n\nPreviously, DSP used to setup the data path towards the\ncodec via slimbus. Now, the data path setup is broken into\ntwo parts - one half of the path setup between apps to slimbus\nand the other half from DSP. This configuration mode is\nrequired to reduce overflow or underflow errors. Also this is\nrequired to handle a configuration where mdm can talk\ndirectly to codec.\n\nChange-Id: Ic9f20b8a2f8a8eb355c07565ec80ec947a7a7337\nSigned-off-by: Bharath Ramachandramurthy \u003cbramacha@codeaurora.org\u003e\n" }, { "commit": "816b8e6e04760da2c38583ae8418c7931f6e96c5", "tree": "90242223c023e7272158dcdcaa1c2e37a6d7ef9f", "parents": [ "6e53da890bbb130b6326394a58c6fe9d965c01eb" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Jan 23 16:03:21 2012 -0800" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Thu Feb 09 16:14:20 2012 -0800" }, "message": "ASoC: wcd9310: Prevent from going suspend while accessing codec registers\n\nThe wcd9310 codec driver which is slimbus slave can access codec\nregisters when slimbus is suspended.\nThis can cause register read/write failure.\nFix to make sure slimbus is awake before accessing wcd9310 codec\u0027s\nregisters through slimbus.\n\nCRs-fixed: 331338\nChange-Id: Iddbdb1614c18dab4bee4f0cc7951884f34cb7173\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "89501015834b0f3e78dc192cb049dc2f4a4b6ff3", "tree": "f9178518e3461def573d4765fe5be5b43daf5bff", "parents": [ "8ead9994c69860b7bb59873106e336b7b979c801" ], "author": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Fri Jan 27 14:11:29 2012 -0800" }, "committer": { "name": "Amy Maloche", "email": "amaloche@codeaurora.org", "time": "Wed Feb 08 10:46:50 2012 -0800" }, "message": "mfd: pm8038-core: Add support for LEDs on pmic 8038\n\nAdd leds as a sub device to pmic 8038. This will also\ntake care of filling platform data for leds driver\nwhich comes as part of pmic pdata.\n\nChange-Id: I3814a0f36f79612684e4a2305e3c5c19dc64cb00\nSigned-off-by: Amy Maloche \u003camaloche@codeaurora.org\u003e\n" }, { "commit": "6c1ebb6226f6d09eeeec30360e53883020ed6247", "tree": "b217e8bab144f18f3b0060527a94d4f9374e9f93", "parents": [ "d16f2a8249615dbef131a93c8f6030395f22672e" ], "author": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Mon Jan 16 19:08:43 2012 -0800" }, "committer": { "name": "Joonwoo Park", "email": "joonwoop@codeaurora.org", "time": "Sat Feb 04 23:12:35 2012 -0800" }, "message": "ASoC: wcd9310: Use correct address of MICB4 registers\n\nUnlike Tabla 1.x, Tabla 2.0 codec has different address of micbias 4\nregisters.\nCheck hardware version and access proper address when accessing\nmicbias 4 registers.\n\nCRs-fixed: 330357\nChange-Id: I5e12a6b15e82b00d2e238c21d795fdc189ead6a5\nSigned-off-by: Joonwoo Park \u003cjoonwoop@codeaurora.org\u003e\n" }, { "commit": "1b570d26b83650cd8f0b42239bbbef2d226598d2", "tree": "1ca2ffecde095b77f421e7caf324504013c60dec", "parents": [ "a489560278e022eb77fd6b1aafbfa830d0db25c6" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Jan 30 15:40:55 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Feb 03 11:07:23 2012 -0800" }, "message": "mfd: pmic: Add voltage switch test registers to PMIC core drivers\n\nSpecify the SSBI test register address for each of the voltage\nswitches in PMIC 8018, 8038, and 8921 core drivers. This will\nallow for future handling of over current protection (OCP) in\nthe pm8xxx-regulator driver.\n\nAlso define the OCP IRQs associated with each of the switches\non these PMICs.\n\nChange-Id: Icfc51c01680e6e95b4348051c764f16cb91b4916\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "98009d81e12a765e23897a30a7a6297f6e20fc51", "tree": "a441489d9f712ff790a3b82540714c8cfc83dd72", "parents": [ "de5a65e6719a60b1ff9625d855d0b707db0176c5", "5db1f24037081da59dcc79fe3f44f9fb7eddc52c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Feb 01 10:37:19 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Feb 01 10:37:20 2012 -0800" }, "message": "Merge \"mfd: pm8xxx-misc: add pm8xxx_usb_id_pullup API\" into msm-3.0" }, { "commit": "5db1f24037081da59dcc79fe3f44f9fb7eddc52c", "tree": "837f57252e15c11b001b9e7347f8bc2a071739d1", "parents": [ "fd0bbeb91d84ef9c6f5c8646e83400b6fa435512" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Mon Jan 30 22:08:04 2012 -0800" }, "committer": { "name": "Pavankumar Kondeti", "email": "pkondeti@codeaurora.org", "time": "Wed Feb 01 14:11:04 2012 +0530" }, "message": "mfd: pm8xxx-misc: add pm8xxx_usb_id_pullup API\n\nPM8921 family provides a pullup enable bit to support USB ID.\nAdd the API for such support.\n\nChange-Id: Id3056af070080c1c12f27720020ae718fc6f34f6\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "b10be97df4f9a10e366b56ac52ac67529c369127", "tree": "c21f9609aeb8d862517d1ea0bb70b36717445ddf", "parents": [ "86bc6639fccd9d21de19b3bb14d6d920ff20342e" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Jan 12 11:30:11 2012 -0800" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Mon Jan 30 11:23:49 2012 -0800" }, "message": "mfd: pm8xxx-pwm: add pre-divide\u003d6 and update macros\n\nAdd pre-divide\u003d6 and update the max period based on new pre-divide.\nAlso update pre-divide related macros for better readability.\n\nChange-Id: I5298c373c78f8723dab9a735e4d94f89798800d5\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "58a3cd78f8236afa9be4184501353b8d28e41f31", "tree": "e9e8d798589497deb1daad3934f21c7712c5d33c", "parents": [ "eddb28b0106815a9a283bebca21f69f341f4d060", "bc38f636fa622a1e54e323a320417c0bfafb0aa8" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Jan 27 21:57:56 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Jan 27 21:57:57 2012 -0800" }, "message": "Merge \"power: pm8921-charger: Allow setting -ve cool/warm temperature\" into msm-3.0" }, { "commit": "bc38f636fa622a1e54e323a320417c0bfafb0aa8", "tree": "44aa84fb0d040117a2dd86a8790eb214cb035317", "parents": [ "8e3e3a8aac6cd7dc3c8ff2b4834a2c96b0e4e105" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Jan 10 09:30:11 2012 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Jan 26 12:10:52 2012 -0800" }, "message": "power: pm8921-charger: Allow setting -ve cool/warm temperature\n\nThe current code assumes that the cool or warm battery temperature\ncan only be +ve numbers. Remove this restriction by allowing -ve\ntemperature settings.\n\nChange-Id: I3c54b854a8fdf934efcf1ff21b36c7a0f763692a\nCRs-Fixed: 320660\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "5106035d9a2ccfef5e83aa1db9aaf4737c9041b9", "tree": "169bfa295a210c1ee09ad0ef964b4a1aec727b25", "parents": [ "395db38b308d0cfc4dc277182c3afa57a4516467" ], "author": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Thu Jan 19 16:58:49 2012 -0800" }, "committer": { "name": "Willie Ruan", "email": "wruan@codeaurora.org", "time": "Wed Jan 25 14:21:54 2012 -0800" }, "message": "mfd: pm8921-core: Add support for PMIC PM8917 chip\n\nThe PMIC PM8917 chip is very similar to the PM8921 chip. Modify\nthe pm8921-core driver so that it can also handle PM8917 chip\nwhich has different number of gpios and mpps, and no LPG/PWM,\nno LEDs and no vibrator.\n\nChange-Id: I252adc2ddc4bcd9bb8b8fb5113444356ba7c969e\nSigned-off-by: Willie Ruan \u003cwruan@codeaurora.org\u003e\n" }, { "commit": "4724272b4be43ed02eb77824069eb4334a853520", "tree": "21e410323616a9b2d6d18955f83c0d04169ada36", "parents": [ "797bef9b610ca70e41c925febd8cf1d5fed0f3c6" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Jan 20 11:34:58 2012 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Jan 20 11:34:58 2012 -0800" }, "message": "mfd: pm8xxx-misc: add an API to preload the dVdd regulator\n\nAdd a new API, pm8xxx_preload_dVdd, which will preload the dVdd\nregulator on PMIC PM8901 chips during off state. This can help\nto reduce fluctuations in the dVdd voltage during startup at the\ncost of additional off state current draw.\n\nThis API should only be called if dVdd startup issues are\nsuspected.\n\nChange-Id: Ic7ee60539de37a761bb9ca6c5200327a7b99da89\nCRs-Fixed: 326086\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "310eb689ab50b6658da0f9f686aea89e92ed90c5", "tree": "fad84ffe7d5828dbcaf04b2dad24736fae1f7646", "parents": [ "7756577620180abacf417f5cbf8fa5f98a652e1a" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Jan 09 10:59:10 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Jan 17 14:55:09 2012 -0800" }, "message": "mfd: pm8xxx: add charger, bms and ccadc devices on PM8038\n\nAdd supported power devices such as charger, bms and CCADC.\n\nThese devices are required to be enabled to provide charging\nfunctionality to the 8930 platform.\n\nChange-Id: Iae5182ff26ba1cbcb256aeb1aee619f7a368765f\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "88e1b57f0078a84d5c8da53f53233026ee146c3c", "tree": "eb2dbd79cbab34a4b424b26e9d5673a1af6157a6", "parents": [ "65ddd84042ec549dc5b2ddc5b5054ae6793f57f0" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Wed Jan 11 11:57:14 2012 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Jan 13 12:05:11 2012 -0800" }, "message": "power: pm8921-charger: support for external charger drivers\n\nAllow the pm8921-charger driver to initiate charging on a\nregistered 3rd party charging driver through the power supply class.\nAlso enable the maintenance of charging properties such as online\nand charge type using the power supply class rather than\ndirectly depending on the 3rd party driver.\n\nWhen a external charger is registered using power_supply_register\nthe external_power_changed callback of the charger driver checks\nfor an external charger named \"dc\". This removes the dependency\nof a 3rd party charger to call directly into the charger driver.\n\nAlso, update the isl9519q driver to reflect the changes and\nutilize power supply class calls to enable charging\non the isl chip from PM8921 charger driver.\n\nThis serves as an example for other 3rd party external\nchargers supporting PMIC with high current charging.\n\nFinally, add pr_fmt macro which automatically adds function name\nto print statements and remove __func__ from individual print\nstatements.\n\nChange-Id: If05e598be260d924ec3263bad33317cf4e7543a1\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "ec3c193aa65c47b21aeddc113b01981027ba59a8", "tree": "1b8c08206bf65fc3a8f454348b3d4663a7f0731b", "parents": [ "868d899222298f96ee15872ded17fff8caeb77d5", "3da01a1ad3ecdbd25b51a28f7463cd3ec89f4665" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Jan 09 17:18:37 2012 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Jan 09 17:18:37 2012 -0800" }, "message": "Merge changes I4973b80b,I3c4fd9d3 into msm-3.0\n\n* changes:\n msm: 8930: Add ADC clients\n mfd: pmic8038-core: Add HK/XOADC device\n" }, { "commit": "ef10213c2fbd0947d27ca95d88360908eb9a4e3f", "tree": "77c05d2e50fb9e4748c0cbe37a1e974d76f2d97c", "parents": [ "eb611317dbd88e9b7e8a9f8507700edd6c472fca" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Mon Dec 19 11:30:32 2011 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Fri Jan 06 18:15:08 2012 -0800" }, "message": "mfd: pmic8038-core: Add HK/XOADC device\n\nHouseKeeping ADC (HKADC) on the PMIC is used by clients\nto measure voltage, current and temperature. Clients\ninclude the Battery, Charger and Thermal clients that\nrequire reading the ADC in real time. This also\nsupports reading the ADC channels that are mapped through\nthe PMIC MPP\u0027s such as the PA THERM channel.\n\nChange-Id: I3c4fd9d368550c1cca168ea097e0d457d01d695e\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "6df9cea2c826573d97ff59da91b5e224d440f9f2", "tree": "4182ae1e0dbf35c36c5df821b9c221605d14a35a", "parents": [ "728bc4d899dd660a35d6ca1089e6b2b9ee84e337" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Wed Dec 21 12:36:45 2011 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Wed Jan 04 11:47:00 2012 -0800" }, "message": "power: pm8921-charger: Add pm8921_set_usb_power_supply_type\n\nUSB can distinguish between types of USB connections such as a\nDC charger or PC connection.\n\nLet the USB drivers set the specifc power_supply_type via this\nfunction.\n\nCRs-Fixed: 326548\nChange-Id: I31954b3f8d2b1e5fd72712e1f94f67fdbc2e205d\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "8c695c5096bc0444083ef3af6c49cfac2a2d87a3", "tree": "d7d954e714c0ed2b689a6bed9f8ba012039b28cf", "parents": [ "f4058b4063c5926dd7819551ca65161e66b6444d" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Dec 12 15:46:02 2011 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Thu Dec 29 06:37:34 2011 -0800" }, "message": "mfd: pm8018-core: use pm8xxx-regulator instead of pm8018-regulator\n\nChange the pm8018-core driver so that it registers devices for\nthe pm8xxx-regulator driver instead of for the pm8018-regulator\ndriver.\n\nThis necessitates changing board file platform data for existing\nPMIC 8018 regulators so that additional pm8xxx-regulator data is\nproperly specified.\n\nChange-Id: I3f64f756a6c48c0dd1684f8d8e98a6fa8dddd6ca\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "ef9ecee3b7966cb80ff9f5d00d9b7485f33705a4", "tree": "2122588b5a1098392924340c19dae31c873ba66c", "parents": [ "a925419e9a64a04af69759953575516397a9f57d", "286693063aea8b04f91f9f1d1ab14c8d6decfd6c" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Wed Dec 28 15:21:38 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Wed Dec 28 15:21:39 2011 -0800" }, "message": "Merge \"power: pm8921-charger: Add api to control OVP\" into msm-3.0" }, { "commit": "286693063aea8b04f91f9f1d1ab14c8d6decfd6c", "tree": "d39efa9140b5b53d56c4bcf07d1665920117cd91", "parents": [ "f9043185f89df5ef9580a833954c1e62ee28f6ba" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Dec 21 08:31:28 2011 -0800" }, "committer": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Tue Dec 27 17:47:08 2011 -0800" }, "message": "power: pm8921-charger: Add api to control OVP\n\nSome board configurations have different needs for usb overvoltage\nthresholds and debounce time for usb detection.\n\nProvide apis to program threshold voltage, debounce time and\ndisable/enable overvoltage protection.\n\nCRs-Fixed: 324137\nChange-Id: Ie618ca12be819739a623cf41e5e1198305467aa5\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "045a76e6056e8499277c0fb6738c7551d99bcf6c", "tree": "d912a83dd50aab6f79de929426d32094ad5f2a5b", "parents": [ "7501674da485110ac5e808ef700f7590f1524a06" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Dec 06 11:35:28 2011 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Dec 27 06:29:14 2011 -0800" }, "message": "mfd: pm8038-core: add pm8xxx-regulator device configuration data\n\nAdd pm8xxx-regulator configuration data into the pm8038-core\ndriver. This adds support for PMIC PM8038 regulators.\n\nChange-Id: I8d6e42d299141a6add3c41ca920d9186ad7fa3ee\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "7501674da485110ac5e808ef700f7590f1524a06", "tree": "03693d548ff60a0941ae77b270de8c7552fc5ea7", "parents": [ "f9043185f89df5ef9580a833954c1e62ee28f6ba" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Dec 02 15:04:25 2011 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Tue Dec 27 06:29:14 2011 -0800" }, "message": "mfd: pm8921-core: use pm8xxx-regulator instead of pm8921-regulator\n\nChange the pm8921-core driver so that it registers devices for\nthe pm8xxx-regulator driver instead of for the pm8921-regulator\ndriver.\n\nThis necessitates changing board file platform data for existing\nPMIC 8921 regulators so that additional pm8xxx-regulator data is\nproperly specified.\n\nChange-Id: I0d48f03344265bd1b7c160bceca944f8924c694c\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "5c4a5aba9b5d98c2b097860901c57df990bb59c1", "tree": "cb0a4a9f9a2b12977e56b885fd1e961b94d46a79", "parents": [ "0705a5f7ea0d3762138322f689106432f25fcfe2" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Fri Dec 02 15:01:26 2011 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Wed Dec 21 09:55:55 2011 -0800" }, "message": "regulator: pm8xxx-regulator: add PM8XXX regulator driver\n\nCreate a PM8XXX regulator driver that can support PMIC PM8921\nvariants including: PM8018, PM8038, and PM8921.\n\nChange-Id: I60d1302e4af9a4c5caa72301c904867acd2ebe0f\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "0c72b8462e0d56176a70586ef3359313becf653c", "tree": "f2f8566ce915655210621b4d42077e7882e91fc9", "parents": [ "33d93bf02c1798644e4119cb6668bb36b9e87de7" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Dec 19 09:08:09 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Dec 19 09:21:39 2011 +0530" }, "message": "mfd: pmic8058: Remove pm8058_hard_reset_config implementation\n\npm8xxx_hard_reset_config implements the required functionality,\nreplace the pm8058 specific call with this.\n\nRemove ssbi_read/ssbi_write functions used in pm8058_hard_reset_config.\nRemove unused variable(pm_lock) and enum(pon_config, pm8058_smpl_delay).\n\nChange-Id: I3c5982ebab9277dc088bd3abd5621eb9acf3add9\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "33d93bf02c1798644e4119cb6668bb36b9e87de7", "tree": "c268e98583f37e39e44cad477f3bbae1a0d2af1d", "parents": [ "4bdc331fc302a70445f2aaf3c0026b0b13809df1" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Fri Dec 16 10:22:26 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Dec 19 08:57:02 2011 +0530" }, "message": "mfd: pmic8058: Remove pm8058_stay_on implementation\n\npm8xxx_stay_on implements the required functionality internally.\n\nModify other occurrences of pm8058_stay_on to pm8xxx_stay_on.\n\nChange-Id: I1c4d932789c6b5592bcbc6fc718d037f188d0e56\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "b508a570fa2a175ce4777c61a66e56f9be14b4cc", "tree": "26d5ef1422f3c19a74a0b0fb9ca3dd2eec233f57", "parents": [ "c6c5503871a2f8b86c0e3a203f7b389bdd6c1307", "49ca45badc6aac637e0a1312d801ec1c50727e6f" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Dec 16 21:09:57 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Dec 16 21:09:57 2011 -0800" }, "message": "Merge \"mfd: pmic8058: Remove reset_pwr_off, smpl control and WD reset control APIs\" into msm-3.0" }, { "commit": "37e6fc0bf7d7353454072f10ca7f3d3e0ca275e9", "tree": "2af58fcb730da6071bee030caff2ba0b621ea99f", "parents": [ "caacc08f9ab04766f56a7f2c0a72372dc67d9ce8" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Wed Nov 16 16:57:03 2011 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Fri Dec 16 10:16:03 2011 -0800" }, "message": "hwmon: pm8xxx-adc-scale: Change scaling function\n\nModify the scaling function routines for Battery temperature\nand all channels whose units return milli-volts for voltage.\n\nThe Charger driver requires the Units of Voltage and temperature\nin uV and 0.1 DegC according to the framework where all voltages,\ncurrents, chargers, energies, time and temperature are in uV, uA,\nuAh, uWh, seconds and tenths of degree Celsius unless otherwise\nstated. In accordance with the above expected units, the scaling\nfunctions are modified for all voltage channels and the Batt Therm.\n\nThis change fixes the XO Therm temperature scaling routine,\nPA Therm and Batt id to use the ratiometric calibration.\nXO Therm and PA therm units are returned as milli-degree and\ndegree Centigrade respectively.\n\nAccordingly, update the clients of xoadc to handle this change in\nunits.\n\nCRs-Fixed: 315797\nChange-Id: I6fa3b808062563fef3b0e70cc694e3132421f735\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "49ca45badc6aac637e0a1312d801ec1c50727e6f", "tree": "3c854b8ac4ac59a3eaf29088a1ae41d99aa0317a", "parents": [ "167763fa84ce85fc4acbeb87e18eec95676ce88d" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Dec 13 15:14:35 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Fri Dec 16 13:34:47 2011 +0530" }, "message": "mfd: pmic8058: Remove reset_pwr_off, smpl control and WD reset control APIs\n\nThese APIs are implemented as a part of pm8xxx_reset_power_off,\npm8xxx_smpl_*, pm8xxx_watchdog_reset_control APIs in the pm8xxx-misc\ndriver.\n\nChange-Id: I8eaf83e0c4d3551d16ecc7fc94c62514711b9a7d\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "9a14eeb2611ff3013e148619c44dbb9d99a5f9fe", "tree": "210983140cd0f7ec2b3dc15637c00ea5caeaea44", "parents": [ "47a21d7ec1c2ca61714fe4ffc31453b6e87cc57d", "f0b9ad0864575da54aeee4062322d4d3a4398e1d" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Dec 15 07:10:54 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Dec 15 07:10:54 2011 -0800" }, "message": "Merge changes Iad754e82,I98666d74,Ic20482e6,I0a833f47 into msm-3.0\n\n* changes:\n mfd: pmic8901: Remove pm8901_reset_power_off implementation\n board: 8660: Add platform data for PM8901 pm8xxx-misc device\n mfd: pmic8901: Add pm8xxx-misc mfd device\n mfd: pm8xxx-misc: Add delay after disabling regulators in shutdown function\n" }, { "commit": "585339b0071ffcbcfc6ef53e3dc4beddc96ea77d", "tree": "ef35bd75b156bf1f5c9089cf56b5ed0d605261c2", "parents": [ "917f4e94c0c16657616999ee2c1efde9248c0cac", "ab83331c7ad4f09bab27affa2b5fe01a0788a214" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Dec 15 07:10:54 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Thu Dec 15 07:10:54 2011 -0800" }, "message": "Merge changes Ida66a62a,I206d116b,I29c71a20 into msm-3.0\n\n* changes:\n power: pm8921-bms: expose start and end charging parameters\n power: pm8921-bms: refactor BMS driver code\n power: pm8921-bms: force max_voltage at end of charge\n" }, { "commit": "f0b9ad0864575da54aeee4062322d4d3a4398e1d", "tree": "873d29afb68bea5ecc71c8fb6761a4e0b2454a21", "parents": [ "b6c98098aa84d2f651f6dfd4f4f79ff6cbf84fa3" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Dec 13 14:48:17 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Thu Dec 15 08:19:28 2011 +0530" }, "message": "mfd: pmic8901: Remove pm8901_reset_power_off implementation\n\npm8901_reset_power_off is implemented as a part of\npm8xxx_reset_power_off (pm8xxx-misc driver).\n\nRemove other functions (ssbi_read/ssbi_write) used only\nby pm8901_reset_power_off.\n\nChange-Id: Iad754e827061627cea55a4d6d1b7600c0cf64441\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "934b2717fb33fbd5b2a8884fc323668ac85af2be", "tree": "77fa97815aa1ded499c0f51252911cb2ea885347", "parents": [ "1fd48c6e081876137457101ab9426defdbc09424" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Dec 13 12:49:51 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Thu Dec 15 08:19:27 2011 +0530" }, "message": "mfd: pmic8901: Add pm8xxx-misc mfd device\n\nMisc driver supports global functions such as\npm8xxx_reset_power_off, pm8xxx_hard_reset_config.\n\nChange-Id: Ic20482e693002ae97c31cc476bc52ad3f99891f7\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "f2226020462824476c6d66799ed24a344124d339", "tree": "3a9766490a0e006968c7b4f84eaadbd55e0690a5", "parents": [ "bf36355e9ccec9411c70ffb4d922b5f5b0b9839f" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Tue Dec 13 15:55:50 2011 -0800" }, "committer": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Tue Dec 13 20:22:52 2011 -0800" }, "message": "power: pm8921-charger: Disable BTM before entering suspend\n\nSignificant sleep current is seen with BTM enabled during suspend.\n\nFix this by disabling BTM before entering suspend and re-enable it\non resume. A board file option may be added to disable this feature.\nBy default battery temperature monitoring will be turned off on\nsuspend.\n\nChange-Id: I6614dc076d8ea69f25840dd3eeef94f9739e392f\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "a93ede8e3f073b4b9f8999afa1ff782cca643547", "tree": "a1482913ca02db38d3124a5bdf67977c60e2a5a2", "parents": [ "fdeb4932f867d1c2454bbb336315c09499658d88" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Nov 17 12:20:03 2011 -0800" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Dec 12 13:53:12 2011 -0800" }, "message": "power: pm8921-bms: force max_voltage at end of charge\n\nWhen an end of charge with a full battery happens, the bms driver\nfakes max ocv and zero cc. To force max ocv the driver currently\nassumes that the first row last column will have the highest profiled\nvoltage. This may not be true always.\n\nPass the maximum voltage from platform data and use that to force\nmax ocv.\n\nChange-Id: I29c71a20648fb2f9066f2f82e14a6080692c63fd\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "9f77e968dd6b1422b084144f962f90e1c17c2132", "tree": "7b2210e8151c0580b0573f2387b37d16e6b8f5b1", "parents": [ "fdeb4932f867d1c2454bbb336315c09499658d88" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Dec 06 12:38:21 2011 +0530" }, "committer": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Mon Dec 12 13:43:27 2011 -0800" }, "message": "mfd: pm8901: Modify pm8901 subdevices to pm8xxx interface\n\nMove the following subdevices to use the pm8xxx interface -\nmpp, irq, thermal, regulators.\n\nThis allows usage of a common driver for modules which are same\nacross multiple PM8XXX PMICs. It also provides flexibility\nto add/remove subdevices for multiple board configurations.\n\nChange-Id: I6478ec1b99b1ab55ca370d314dbeb590103a4b1c\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "9d36a3d4571455400955e0030a16e42d88509147", "tree": "fe7fb1ad06a2cfda2762e52f0d36f48fdebdfea0", "parents": [ "65683dcd47cc34b775a140d9a540958e8b2a42cc" ], "author": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Wed Oct 26 15:57:51 2011 -0700" }, "committer": { "name": "Jay Chokshi", "email": "jchokshi@codeaurora.org", "time": "Fri Dec 09 17:24:27 2011 -0800" }, "message": "mfd: pm8038: Add PMIC 8038 core driver\n\nAdd support for the Qualcomm PM8038 PMIC chip. The core driver\nwill communicate with the PMIC chip via the MSM SSBI bus.\n\nInitial support is provided for: IRQ, GPIO, MPP, RTC, Power Key,\nMisc, and Debug.\n\nChange-Id: I83f995cc238699100a05e82d04b45ea2a63eb667\nSigned-off-by: Jay Chokshi \u003cjchokshi@codeaurora.org\u003e\n" }, { "commit": "012deefa0bbc38fbef4860185d78ee05d77772a6", "tree": "ed22f3618a19f0fbb3ad0c8b7526a1cd56b5a5c5", "parents": [ "4121ed0859d7b400c1782b66e4ea5060adfd800a" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Dec 02 11:49:33 2011 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Dec 05 12:23:44 2011 -0800" }, "message": "power: pm8921-charger: Allow disabling of input current limit\n\nSome use cases require higher input currents which are out of range\nof USB specification.\n\nFix this by adding a call to disable the input current limit and\nwarn the user with an adequate message that input current limiting\nis disabled when the function is called\n\nCRs-Fixed: 318511\nChange-Id: I7e2baa0378c94b0b9af22c00d8605b9df8d4f826\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "999480d505bbf14aeddeab512f57f0f46aa69b0d", "tree": "79d3129cd613e3e4ef191b4056836434203dd238", "parents": [ "e8992f221351880366f08375d12a0a326dcb6667" ], "author": { "name": "David Collins", "email": "collinsd@codeaurora.org", "time": "Wed Nov 16 08:52:30 2011 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Dec 02 01:22:32 2011 -0700" }, "message": "mfd: pm8921-core: Add support for PMIC PM8922 chips\n\nThe PMIC PM8922 chip is very similar to the PM8921 chip. Modify\nthe pm8921-core driver so that it can also handle PM8922 chips.\n\nChange-Id: Ibae402ff65d1af4e0f18e4a66304f7ac609065b4\nSigned-off-by: David Collins \u003ccollinsd@codeaurora.org\u003e\n" }, { "commit": "af91d9056d61b28231893925aaa1534f63f1c65b", "tree": "94d40d6a44538a0d589d163e7b422707ae865338", "parents": [ "ec6fd7af651dc2126e5c15936b3ef22c55ead78a" ], "author": { "name": "Siddartha Mohanadoss", "email": "smohanad@codeaurora.org", "time": "Thu Oct 20 10:23:34 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Thu Dec 01 04:35:59 2011 -0700" }, "message": "hwmon: pm8xxx_adc: Remove pm8921-adc\n\nSwitch clients to use pm8xxx-adc and remove pm8921-adc.\npm8xxx-adc supports PMIC HK/XOADC for 8960, 9x15, 8064\nplatforms.\n\nChange-Id: Id27fa908cc097d52e6033c28ce243c6bcf64ed27\nSigned-off-by: Siddartha Mohanadoss \u003csmohanad@codeaurora.org\u003e\n" }, { "commit": "70251b0b8125a4f4c6f72fac5e0845f17717a089", "tree": "6581a745024564c26c713ac0aecdb556af59445a", "parents": [ "700c9ccf0690c56428a2f36e473ed5c604ea812d" ], "author": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Fri Nov 18 12:22:58 2011 -0800" }, "committer": { "name": "David Keitel", "email": "dkeitel@codeaurora.org", "time": "Mon Nov 28 14:50:02 2011 -0800" }, "message": "mfd: pm8921-core: PMIC 8921 rev 3.0 revision mask\n\nAdd the revision mask for PMIC8921 revision 3.0 to avoid\nprinting unknown PMIC revision in kernel log.\n\nChange-Id: Ied28321866551aecbb1658dda5f17018256254a3\nSigned-off-by: David Keitel \u003cdkeitel@codeaurora.org\u003e\n" }, { "commit": "ca42c7dec9bd2b47e63b9aebc627289b726c17b7", "tree": "b0f1cd9166f20f51a5ebc0373552ba8d56837932", "parents": [ "79f8d372afc2498c37487cee49da696cc7a63f0d" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 21 10:42:07 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 22 21:26:33 2011 +0530" }, "message": "mfd: pm8xxx-irq: Provide the IRQ base address through core data\n\nFacilitate the driver to support PMICs (such as PM8901)\nwith different IRQ base address.\n\nChange-Id: I285a9b859b795508620ea6dfd7b5ef6953e7aeb3\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "f756be5b278215b6c33c1779d0daef221327ba27", "tree": "ee587ed97392abbb3d1b2414d8eea63eba02a14d", "parents": [ "40863cbbefa01c8a8c281cf99b14617852683dc0", "e15e230fcfc90a8dff53930abacc20171e1c8612" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Tue Nov 22 06:35:56 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Tue Nov 22 06:35:56 2011 -0800" }, "message": "Merge \"ASoC: wcd9310: add I2C\\I2S support for tabla codec\" into msm-3.0" }, { "commit": "82d939848fd1a6291d6d73de4d39693b578d8e17", "tree": "9acf1949573d38af4339df7c4ba2a1e9d9c737c4", "parents": [ "df0f40090a5682eb578f1c53dcd30d47a9892891" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Wed Nov 09 15:52:25 2011 -0800" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 21 11:21:31 2011 -0700" }, "message": "power: pm8xxx-ccadc: Add pm8xxx ccadc subdevice\n\nUntil now only the BMS system was using the ccadc so there was\nno need to create a separate ccadc driver.\n\nHowever we can run in a configuration with BMS disabled\nand clients won\u0027t be able to read battery current via ccadc.\n\nSeparate the ccadc from the bms, this change in is preparation\nto add a ccadc api to read the battery current.\n\nChange-Id: Ib96b146d91d01d196df9291eb23432cd430db4d0\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "df0f40090a5682eb578f1c53dcd30d47a9892891", "tree": "e258af03d84c8ab6fe8d02e0c4e77c719f10fb3c", "parents": [ "d9ff38ad69379fae9789f92408608df7a1dcb14b", "d55878e749c538c5aa5c0cdb8384892dd169a6bc" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Mon Nov 21 10:14:36 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Mon Nov 21 10:14:36 2011 -0800" }, "message": "Merge \"power: pm8921-charger: use resume_voltage_delta\" into msm-3.0" }, { "commit": "c49157f8373de06f6c0ed4a21dfb98265ea9fb48", "tree": "11b67ea9907abafbb6f2d0cd261a0772215fa381", "parents": [ "79c0d25bac3a0a4e99576bd1e639444e243cab20" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed Nov 09 14:49:59 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 21 10:06:00 2011 +0530" }, "message": "msm: 8660: Add ssbi device for PM8901\n\nUse the msm-ssbi driver for communication over\nthe SSBI interafce.\n\nChange-Id: Ibc26754944c32ac8eaa939f552033974e1a7758f\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "d55878e749c538c5aa5c0cdb8384892dd169a6bc", "tree": "8d21a5936ccddf1dc264d7a2c28ecba250515977", "parents": [ "79c0d25bac3a0a4e99576bd1e639444e243cab20" ], "author": { "name": "Abhijeet Dharmapurikar", "email": "adharmap@codeaurora.org", "time": "Thu Oct 27 10:22:24 2011 -0700" }, "committer": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 20 19:32:40 2011 -0700" }, "message": "power: pm8921-charger: use resume_voltage_delta\n\nSince the driver will be changing the max vdd if the battery\ntemperature enters warm or cool zone, it should also change\nthe vbatdet voltage so resume of charging can begin accordingly.\n\nAlso provide a means to quickly debug is the battery is in cool/warm\nzone.\n\nChange-Id: I0fe83a4fabf76711bf86377c3ac23cceecb6e98b\nSigned-off-by: Abhijeet Dharmapurikar \u003cadharmap@codeaurora.org\u003e\n" }, { "commit": "e15e230fcfc90a8dff53930abacc20171e1c8612", "tree": "5246007e6263e573a33375ce5513cc54b3ae41a2", "parents": [ "ca53a33ce6c4ef33e69fc8f8d889bcf45c6ec31e" ], "author": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Tue Nov 15 10:39:23 2011 +0530" }, "committer": { "name": "Santosh Mardi", "email": "gsantosh@codeaurora.org", "time": "Fri Nov 18 03:06:26 2011 +0530" }, "message": "ASoC: wcd9310: add I2C\\I2S support for tabla codec\n\nAdd support for I2C\\I2S interface for tabla codec along\nWith SLIMBUS interface.\n\nChange-Id: Ib0f2ebe62121c1e43a9bdbcaec7621e9d96ac3c4\nSigned-off-by: Santosh Mardi \u003cgsantosh@codeaurora.org\u003e\n" }, { "commit": "d074fa2796bdbc42c4f918c78d6711bafc80b1c8", "tree": "033929706a0aae95f65c134a8fc09cec3fb3e75d", "parents": [ "53ae1740b250e4d02dd7a6ca82075355ad99dc23", "9ab6a29787b1221a697f85835645549668258bdc" ], "author": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Nov 16 13:52:50 2011 -0800" }, "committer": { "name": "Bryan Huntsman", "email": "bryanh@codeaurora.org", "time": "Wed Nov 16 13:52:50 2011 -0800" }, "message": "Merge remote-tracking branch \u0027common/android-3.0\u0027 into msm-3.0\n\n* common/android-3.0: (570 commits)\n misc: remove kernel debugger core\n ARM: common: fiq_debugger: dump sysrq directly to console if enabled\n ARM: common: fiq_debugger: add irq context debug functions\n net: wireless: bcmdhd: Call init_ioctl() only if was started properly for WEXT\n net: wireless: bcmdhd: Call init_ioctl() only if was started properly\n net: wireless: bcmdhd: Fix possible memory leak in escan/iscan\n cpufreq: interactive governor: default 20ms timer\n cpufreq: interactive governor: go to intermediate hi speed before max\n cpufreq: interactive governor: scale to max only if at min speed\n cpufreq: interactive governor: apply intermediate load on current speed\n ARM: idle: update idle ticks before call idle end notifier\n input: gpio_input: don\u0027t print debounce message unless flag is set\n net: wireless: bcm4329: Skip dhd_bus_stop() if bus is already down\n net: wireless: bcmdhd: Skip dhd_bus_stop() if bus is already down\n net: wireless: bcmdhd: Improve suspend/resume processing\n net: wireless: bcmdhd: Check if FW is Ok for internal FW call\n tcp: Don\u0027t nuke connections for the wrong protocol\n ARM: common: fiq_debugger: make uart irq be no_suspend\n net: wireless: Skip connect warning for CONFIG_CFG80211_ALLOW_RECONNECT\n mm: avoid livelock on !__GFP_FS allocations\n ...\n\nConflicts:\n\tarch/arm/mm/cache-l2x0.c\n\tarch/arm/vfp/vfpmodule.c\n\tdrivers/mmc/core/host.c\n\tkernel/power/wakelock.c\n\tnet/bluetooth/hci_event.c\n\nSigned-off-by: Bryan Huntsman \u003cbryanh@codeaurora.org\u003e\n" }, { "commit": "c2019339bc48faf4d639398e6ce210760b856cb1", "tree": "af1c28aa377d9c277ab4a55880a8026003650145", "parents": [ "ca61ef66848080dc288ddf766adc2f7f4e5423d7" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Sat Nov 12 06:29:10 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Wed Nov 16 19:06:11 2011 +0530" }, "message": "mfd: pm8058: Modify pm8058 subdevices to pm8xxx interface\n\nMove the following subdevices to use the pm8xxx interface -\nmpp, irq, gpio, keypad, power-key, leds, othc, vibrator,\nrtc, batt-alarm, thermal, upl, nfc, pwm, xoadc, regulators,\nxo-buffers, charger.\n\nThis allows usage of a common driver for modules which are same\nacross multiple PM8XXX PMICs. It also provides flexibility\nto add/remove subdevices for multiple board configurations.\n\nChange-Id: Id9795552fc9f4a2c920c070babfaef1f4cd6ca61\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "51e947f6f540483f933b19ae733e54c3e7b35ae4", "tree": "e5ca2325ccf0ce274208bc53be6062f3e66ced07", "parents": [ "a4262a3821dd2d8d2207298e2afe702cf60cdcd7" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Tue Nov 01 14:49:45 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 14 08:19:17 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx stay on API\n\nThe API configures the PMIC to ignore the PS_HOLD low\nsignal, which can be used during debugging.\n\nChange-Id: I162657934e34da081eb897d64ffed36ad48e4eff\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "a4262a3821dd2d8d2207298e2afe702cf60cdcd7", "tree": "ad4c5c0e3e6a6eeecaaa96d9a898e963fba1ebdc", "parents": [ "f762c9a5eea642253519234c73129620b159e708" ], "author": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Thu Nov 10 00:02:18 2011 +0530" }, "committer": { "name": "Anirudh Ghayal", "email": "aghayal@codeaurora.org", "time": "Mon Nov 14 08:19:05 2011 +0530" }, "message": "mfd: pm8xxx-misc: Add pm8xxx hard reset config API\n\nThe API configures PMIC for different behaviour on hard reset.\nThe different options are to disable hard reset, shutdown or\nrestart on hard reset.\n\nChange-Id: I214d563e904dd7e73c98a454866718a60a11b6dd\nSigned-off-by: Anirudh Ghayal \u003caghayal@codeaurora.org\u003e\n" }, { "commit": "27e8d537199bbcb12cbc4003529944048deae187", "tree": "7b53778b733473f3f4057c7b3112980f77cf09e1", "parents": [ "af0ac318cce9dfe3278d7c14e6d6c68ff4892b90", "a23c1cabcc3adce057d86deeb3efd6e31ec8c8c9" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Sun Nov 13 13:30:25 2011 -0800" }, "message": "Merge changes I75853196,I9e677ebd,Id3802e37,Ic3fe2733 into msm-3.0\n\n* changes:\n mfd: pm8xxx-misc: Add pm8xxx watchdog reset control API\n mfd: pm8xxx-misc: Add pm8xxx smpl based API\u0027s\n mfd: pm8xxx-misc: Add the pm8xxx coincell chg API\n mfd: pm8xxx-misc: Add a ISR to handle 32 kHz OSC halt\n" }, { "commit": "72a2b5ddf538edeff41fecc1e702b26357875835", "tree": "1685345e1adf630f8f8c54cc3acacb3da194faef", "parents": [ "7805b5a4806ee0487ddeacd8b6e663d2f5da1ae4", "ae39c90df6023db71ee11b14be01873c7143e34e" ], "author": { "name": "Linux Build Service Account", "email": "lnxbuild@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "committer": { "name": "QuIC Gerrit Code Review", "email": "code-review@localhost", "time": "Fri Nov 11 21:45:05 2011 -0800" }, "message": "Merge \"hwmon: pm8xxx-adc: Merge pm8921-adc and pm8xxx-adc\" into msm-3.0" } ], "next": "a23c1cabcc3adce057d86deeb3efd6e31ec8c8c9" }