| /* | 
 |  * latency.c: Explicit system-wide latency-expectation infrastructure | 
 |  * | 
 |  * The purpose of this infrastructure is to allow device drivers to set | 
 |  * latency constraint they have and to collect and summarize these | 
 |  * expectations globally. The cummulated result can then be used by | 
 |  * power management and similar users to make decisions that have | 
 |  * tradoffs with a latency component. | 
 |  * | 
 |  * An example user of this are the x86 C-states; each higher C state saves | 
 |  * more power, but has a higher exit latency. For the idle loop power | 
 |  * code to make a good decision which C-state to use, information about | 
 |  * acceptable latencies is required. | 
 |  * | 
 |  * An example announcer of latency is an audio driver that knowns it | 
 |  * will get an interrupt when the hardware has 200 usec of samples | 
 |  * left in the DMA buffer; in that case the driver can set a latency | 
 |  * constraint of, say, 150 usec. | 
 |  * | 
 |  * Multiple drivers can each announce their maximum accepted latency, | 
 |  * to keep these appart, a string based identifier is used. | 
 |  * | 
 |  * | 
 |  * (C) Copyright 2006 Intel Corporation | 
 |  * Author: Arjan van de Ven <arjan@linux.intel.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; version 2 | 
 |  * of the License. | 
 |  */ | 
 |  | 
 | #include <linux/latency.h> | 
 | #include <linux/list.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/notifier.h> | 
 | #include <asm/atomic.h> | 
 |  | 
 | struct latency_info { | 
 | 	struct list_head list; | 
 | 	int usecs; | 
 | 	char *identifier; | 
 | }; | 
 |  | 
 | /* | 
 |  * locking rule: all modifications to current_max_latency and | 
 |  * latency_list need to be done while holding the latency_lock. | 
 |  * latency_lock needs to be taken _irqsave. | 
 |  */ | 
 | static atomic_t current_max_latency; | 
 | static DEFINE_SPINLOCK(latency_lock); | 
 |  | 
 | static LIST_HEAD(latency_list); | 
 | static BLOCKING_NOTIFIER_HEAD(latency_notifier); | 
 |  | 
 | /* | 
 |  * This function returns the maximum latency allowed, which | 
 |  * happens to be the minimum of all maximum latencies on the | 
 |  * list. | 
 |  */ | 
 | static int __find_max_latency(void) | 
 | { | 
 | 	int min = INFINITE_LATENCY; | 
 | 	struct latency_info *info; | 
 |  | 
 | 	list_for_each_entry(info, &latency_list, list) { | 
 | 		if (info->usecs < min) | 
 | 			min = info->usecs; | 
 | 	} | 
 | 	return min; | 
 | } | 
 |  | 
 | /** | 
 |  * set_acceptable_latency - sets the maximum latency acceptable | 
 |  * @identifier: string that identifies this driver | 
 |  * @usecs: maximum acceptable latency for this driver | 
 |  * | 
 |  * This function informs the kernel that this device(driver) | 
 |  * can accept at most usecs latency. This setting is used for | 
 |  * power management and similar tradeoffs. | 
 |  * | 
 |  * This function sleeps and can only be called from process | 
 |  * context. | 
 |  * Calling this function with an existing identifier is valid | 
 |  * and will cause the existing latency setting to be changed. | 
 |  */ | 
 | void set_acceptable_latency(char *identifier, int usecs) | 
 | { | 
 | 	struct latency_info *info, *iter; | 
 | 	unsigned long flags; | 
 | 	int found_old = 0; | 
 |  | 
 | 	info = kzalloc(sizeof(struct latency_info), GFP_KERNEL); | 
 | 	if (!info) | 
 | 		return; | 
 | 	info->usecs = usecs; | 
 | 	info->identifier = kstrdup(identifier, GFP_KERNEL); | 
 | 	if (!info->identifier) | 
 | 		goto free_info; | 
 |  | 
 | 	spin_lock_irqsave(&latency_lock, flags); | 
 | 	list_for_each_entry(iter, &latency_list, list) { | 
 | 		if (strcmp(iter->identifier, identifier)==0) { | 
 | 			found_old = 1; | 
 | 			iter->usecs = usecs; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (!found_old) | 
 | 		list_add(&info->list, &latency_list); | 
 |  | 
 | 	if (usecs < atomic_read(¤t_max_latency)) | 
 | 		atomic_set(¤t_max_latency, usecs); | 
 |  | 
 | 	spin_unlock_irqrestore(&latency_lock, flags); | 
 |  | 
 | 	blocking_notifier_call_chain(&latency_notifier, | 
 | 		atomic_read(¤t_max_latency), NULL); | 
 |  | 
 | 	/* | 
 | 	 * if we inserted the new one, we're done; otherwise there was | 
 | 	 * an existing one so we need to free the redundant data | 
 | 	 */ | 
 | 	if (!found_old) | 
 | 		return; | 
 |  | 
 | 	kfree(info->identifier); | 
 | free_info: | 
 | 	kfree(info); | 
 | } | 
 | EXPORT_SYMBOL_GPL(set_acceptable_latency); | 
 |  | 
 | /** | 
 |  * modify_acceptable_latency - changes the maximum latency acceptable | 
 |  * @identifier: string that identifies this driver | 
 |  * @usecs: maximum acceptable latency for this driver | 
 |  * | 
 |  * This function informs the kernel that this device(driver) | 
 |  * can accept at most usecs latency. This setting is used for | 
 |  * power management and similar tradeoffs. | 
 |  * | 
 |  * This function does not sleep and can be called in any context. | 
 |  * Trying to use a non-existing identifier silently gets ignored. | 
 |  * | 
 |  * Due to the atomic nature of this function, the modified latency | 
 |  * value will only be used for future decisions; past decisions | 
 |  * can still lead to longer latencies in the near future. | 
 |  */ | 
 | void modify_acceptable_latency(char *identifier, int usecs) | 
 | { | 
 | 	struct latency_info *iter; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&latency_lock, flags); | 
 | 	list_for_each_entry(iter, &latency_list, list) { | 
 | 		if (strcmp(iter->identifier, identifier) == 0) { | 
 | 			iter->usecs = usecs; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	if (usecs < atomic_read(¤t_max_latency)) | 
 | 		atomic_set(¤t_max_latency, usecs); | 
 | 	spin_unlock_irqrestore(&latency_lock, flags); | 
 | } | 
 | EXPORT_SYMBOL_GPL(modify_acceptable_latency); | 
 |  | 
 | /** | 
 |  * remove_acceptable_latency - removes the maximum latency acceptable | 
 |  * @identifier: string that identifies this driver | 
 |  * | 
 |  * This function removes a previously set maximum latency setting | 
 |  * for the driver and frees up any resources associated with the | 
 |  * bookkeeping needed for this. | 
 |  * | 
 |  * This function does not sleep and can be called in any context. | 
 |  * Trying to use a non-existing identifier silently gets ignored. | 
 |  */ | 
 | void remove_acceptable_latency(char *identifier) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int newmax = 0; | 
 | 	struct latency_info *iter, *temp; | 
 |  | 
 | 	spin_lock_irqsave(&latency_lock, flags); | 
 |  | 
 | 	list_for_each_entry_safe(iter,  temp, &latency_list, list) { | 
 | 		if (strcmp(iter->identifier, identifier) == 0) { | 
 | 			list_del(&iter->list); | 
 | 			newmax = iter->usecs; | 
 | 			kfree(iter->identifier); | 
 | 			kfree(iter); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* If we just deleted the system wide value, we need to | 
 | 	 * recalculate with a full search | 
 | 	 */ | 
 | 	if (newmax == atomic_read(¤t_max_latency)) { | 
 | 		newmax = __find_max_latency(); | 
 | 		atomic_set(¤t_max_latency, newmax); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&latency_lock, flags); | 
 | } | 
 | EXPORT_SYMBOL_GPL(remove_acceptable_latency); | 
 |  | 
 | /** | 
 |  * system_latency_constraint - queries the system wide latency maximum | 
 |  * | 
 |  * This function returns the system wide maximum latency in | 
 |  * microseconds. | 
 |  * | 
 |  * This function does not sleep and can be called in any context. | 
 |  */ | 
 | int system_latency_constraint(void) | 
 | { | 
 | 	return atomic_read(¤t_max_latency); | 
 | } | 
 | EXPORT_SYMBOL_GPL(system_latency_constraint); | 
 |  | 
 | /** | 
 |  * synchronize_acceptable_latency - recalculates all latency decisions | 
 |  * | 
 |  * This function will cause a callback to various kernel pieces that | 
 |  * will make those pieces rethink their latency decisions. This implies | 
 |  * that if there are overlong latencies in hardware state already, those | 
 |  * latencies get taken right now. When this call completes no overlong | 
 |  * latency decisions should be active anymore. | 
 |  * | 
 |  * Typical usecase of this is after a modify_acceptable_latency() call, | 
 |  * which in itself is non-blocking and non-synchronizing. | 
 |  * | 
 |  * This function blocks and should not be called with locks held. | 
 |  */ | 
 |  | 
 | void synchronize_acceptable_latency(void) | 
 | { | 
 | 	blocking_notifier_call_chain(&latency_notifier, | 
 | 		atomic_read(¤t_max_latency), NULL); | 
 | } | 
 | EXPORT_SYMBOL_GPL(synchronize_acceptable_latency); | 
 |  | 
 | /* | 
 |  * Latency notifier: this notifier gets called when a non-atomic new | 
 |  * latency value gets set. The expectation nof the caller of the | 
 |  * non-atomic set is that when the call returns, future latencies | 
 |  * are within bounds, so the functions on the notifier list are | 
 |  * expected to take the overlong latencies immediately, inside the | 
 |  * callback, and not make a overlong latency decision anymore. | 
 |  * | 
 |  * The callback gets called when the new latency value is made | 
 |  * active so system_latency_constraint() returns the new latency. | 
 |  */ | 
 | int register_latency_notifier(struct notifier_block * nb) | 
 | { | 
 | 	return blocking_notifier_chain_register(&latency_notifier, nb); | 
 | } | 
 | EXPORT_SYMBOL_GPL(register_latency_notifier); | 
 |  | 
 | int unregister_latency_notifier(struct notifier_block * nb) | 
 | { | 
 | 	return blocking_notifier_chain_unregister(&latency_notifier, nb); | 
 | } | 
 | EXPORT_SYMBOL_GPL(unregister_latency_notifier); | 
 |  | 
 | static __init int latency_init(void) | 
 | { | 
 | 	atomic_set(¤t_max_latency, INFINITE_LATENCY); | 
 | 	/* | 
 | 	 * we don't want by default to have longer latencies than 2 ticks, | 
 | 	 * since that would cause lost ticks | 
 | 	 */ | 
 | 	set_acceptable_latency("kernel", 2*1000000/HZ); | 
 | 	return 0; | 
 | } | 
 |  | 
 | module_init(latency_init); |