Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/alpha/kernel/sys_miata.c b/arch/alpha/kernel/sys_miata.c
new file mode 100644
index 0000000..61ac56f
--- /dev/null
+++ b/arch/alpha/kernel/sys_miata.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/alpha/kernel/sys_miata.c
+ *
+ * Copyright (C) 1995 David A Rusling
+ * Copyright (C) 1996 Jay A Estabrook
+ * Copyright (C) 1998, 1999, 2000 Richard Henderson
+ *
+ * Code supporting the MIATA (EV56+PYXIS).
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_cia.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+static void
+miata_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+ int irq;
+
+ irq = (vector - 0x800) >> 4;
+
+ /*
+ * I really hate to do this, but the MIATA SRM console ignores the
+ * low 8 bits in the interrupt summary register, and reports the
+ * vector 0x80 *lower* than I expected from the bit numbering in
+ * the documentation.
+ * This was done because the low 8 summary bits really aren't used
+ * for reporting any interrupts (the PCI-ISA bridge, bit 7, isn't
+ * used for this purpose, as PIC interrupts are delivered as the
+ * vectors 0x800-0x8f0).
+ * But I really don't want to change the fixup code for allocation
+ * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
+ * look nice and clean now.
+ * So, here's this grotty hack... :-(
+ */
+ if (irq >= 16)
+ irq = irq + 8;
+
+ handle_irq(irq, regs);
+}
+
+static void __init
+miata_init_irq(void)
+{
+ if (alpha_using_srm)
+ alpha_mv.device_interrupt = miata_srm_device_interrupt;
+
+#if 0
+ /* These break on MiataGL so we'll try not to do it at all. */
+ *(vulp)PYXIS_INT_HILO = 0x000000B2UL; mb(); /* ISA/NMI HI */
+ *(vulp)PYXIS_RT_COUNT = 0UL; mb(); /* clear count */
+#endif
+
+ init_i8259a_irqs();
+
+ /* Not interested in the bogus interrupts (3,10), Fan Fault (0),
+ NMI (1), or EIDE (9).
+
+ We also disable the risers (4,5), since we don't know how to
+ route the interrupts behind the bridge. */
+ init_pyxis_irqs(0x63b0000);
+
+ common_init_isa_dma();
+ setup_irq(16+2, &halt_switch_irqaction); /* SRM only? */
+ setup_irq(16+6, &timer_cascade_irqaction);
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ PYXIS_INT_REQ:
+ * Bit Meaning
+ * 0 Fan Fault
+ * 1 NMI
+ * 2 Halt/Reset switch
+ * 3 none
+ * 4 CID0 (Riser ID)
+ * 5 CID1 (Riser ID)
+ * 6 Interval timer
+ * 7 PCI-ISA Bridge
+ * 8 Ethernet
+ * 9 EIDE (deprecated, ISA 14/15 used)
+ *10 none
+ *11 USB
+ *12 Interrupt Line A from slot 4
+ *13 Interrupt Line B from slot 4
+ *14 Interrupt Line C from slot 4
+ *15 Interrupt Line D from slot 4
+ *16 Interrupt Line A from slot 5
+ *17 Interrupt line B from slot 5
+ *18 Interrupt Line C from slot 5
+ *19 Interrupt Line D from slot 5
+ *20 Interrupt Line A from slot 1
+ *21 Interrupt Line B from slot 1
+ *22 Interrupt Line C from slot 1
+ *23 Interrupt Line D from slot 1
+ *24 Interrupt Line A from slot 2
+ *25 Interrupt Line B from slot 2
+ *26 Interrupt Line C from slot 2
+ *27 Interrupt Line D from slot 2
+ *27 Interrupt Line A from slot 3
+ *29 Interrupt Line B from slot 3
+ *30 Interrupt Line C from slot 3
+ *31 Interrupt Line D from slot 3
+ *
+ * The device to slot mapping looks like:
+ *
+ * Slot Device
+ * 3 DC21142 Ethernet
+ * 4 EIDE CMD646
+ * 5 none
+ * 6 USB
+ * 7 PCI-ISA bridge
+ * 8 PCI-PCI Bridge (SBU Riser)
+ * 9 none
+ * 10 none
+ * 11 PCI on board slot 4 (SBU Riser)
+ * 12 PCI on board slot 5 (SBU Riser)
+ *
+ * These are behind the bridge, so I'm not sure what to do...
+ *
+ * 13 PCI on board slot 1 (SBU Riser)
+ * 14 PCI on board slot 2 (SBU Riser)
+ * 15 PCI on board slot 3 (SBU Riser)
+ *
+ *
+ * This two layered interrupt approach means that we allocate IRQ 16 and
+ * above for PCI interrupts. The IRQ relates to which bit the interrupt
+ * comes in on. This makes interrupt processing much easier.
+ */
+
+static int __init
+miata_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static char irq_tab[18][5] __initdata = {
+ /*INT INTA INTB INTC INTD */
+ {16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8}, /* IdSel 14, DC21142 */
+ { -1, -1, -1, -1, -1}, /* IdSel 15, EIDE */
+ { -1, -1, -1, -1, -1}, /* IdSel 16, none */
+ { -1, -1, -1, -1, -1}, /* IdSel 17, none */
+ { -1, -1, -1, -1, -1}, /* IdSel 18, PCI-ISA */
+ { -1, -1, -1, -1, -1}, /* IdSel 19, PCI-PCI */
+ { -1, -1, -1, -1, -1}, /* IdSel 20, none */
+ { -1, -1, -1, -1, -1}, /* IdSel 21, none */
+ {16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 22, slot 4 */
+ {16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 23, slot 5 */
+ /* the next 7 are actually on PCI bus 1, across the bridge */
+ {16+11, 16+11, 16+11, 16+11, 16+11}, /* IdSel 24, QLISP/GL*/
+ { -1, -1, -1, -1, -1}, /* IdSel 25, none */
+ { -1, -1, -1, -1, -1}, /* IdSel 26, none */
+ { -1, -1, -1, -1, -1}, /* IdSel 27, none */
+ {16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 28, slot 1 */
+ {16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 29, slot 2 */
+ {16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 30, slot 3 */
+ /* This bridge is on the main bus of the later orig MIATA */
+ { -1, -1, -1, -1, -1}, /* IdSel 31, PCI-PCI */
+ };
+ const long min_idsel = 3, max_idsel = 20, irqs_per_slot = 5;
+
+ /* the USB function of the 82c693 has it's interrupt connected to
+ the 2nd 8259 controller. So we have to check for it first. */
+
+ if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
+ u8 irq=0;
+
+ if(pci_read_config_byte(pci_find_slot(dev->bus->number, dev->devfn & ~(7)), 0x40,&irq)!=PCIBIOS_SUCCESSFUL)
+ return -1;
+ else
+ return irq;
+ }
+
+ return COMMON_TABLE_LOOKUP;
+}
+
+static u8 __init
+miata_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ int slot, pin = *pinp;
+
+ if (dev->bus->number == 0) {
+ slot = PCI_SLOT(dev->devfn);
+ }
+ /* Check for the built-in bridge. */
+ else if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
+ (PCI_SLOT(dev->bus->self->devfn) == 20)) {
+ slot = PCI_SLOT(dev->devfn) + 9;
+ }
+ else
+ {
+ /* Must be a card-based bridge. */
+ do {
+ if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
+ (PCI_SLOT(dev->bus->self->devfn) == 20)) {
+ slot = PCI_SLOT(dev->devfn) + 9;
+ break;
+ }
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ /* Slot of the next bridge. */
+ slot = PCI_SLOT(dev->devfn);
+ } while (dev->bus->self);
+ }
+ *pinp = pin;
+ return slot;
+}
+
+static void __init
+miata_init_pci(void)
+{
+ cia_init_pci();
+ SMC669_Init(0); /* it might be a GL (fails harmlessly if not) */
+ es1888_init();
+}
+
+static void
+miata_kill_arch(int mode)
+{
+ cia_kill_arch(mode);
+
+#ifndef ALPHA_RESTORE_SRM_SETUP
+ switch(mode) {
+ case LINUX_REBOOT_CMD_RESTART:
+ /* Who said DEC engineers have no sense of humor? ;-) */
+ if (alpha_using_srm) {
+ *(vuip) PYXIS_RESET = 0x0000dead;
+ mb();
+ }
+ break;
+ case LINUX_REBOOT_CMD_HALT:
+ break;
+ case LINUX_REBOOT_CMD_POWER_OFF:
+ break;
+ }
+
+ halt();
+#endif
+}
+
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector miata_mv __initmv = {
+ .vector_name = "Miata",
+ DO_EV5_MMU,
+ DO_DEFAULT_RTC,
+ DO_PYXIS_IO,
+ .machine_check = cia_machine_check,
+ .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
+ .min_io_address = DEFAULT_IO_BASE,
+ .min_mem_address = DEFAULT_MEM_BASE,
+ .pci_dac_offset = PYXIS_DAC_OFFSET,
+
+ .nr_irqs = 48,
+ .device_interrupt = pyxis_device_interrupt,
+
+ .init_arch = pyxis_init_arch,
+ .init_irq = miata_init_irq,
+ .init_rtc = common_init_rtc,
+ .init_pci = miata_init_pci,
+ .kill_arch = miata_kill_arch,
+ .pci_map_irq = miata_map_irq,
+ .pci_swizzle = miata_swizzle,
+};
+ALIAS_MV(miata)