Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
new file mode 100644
index 0000000..fd7bd17
--- /dev/null
+++ b/arch/alpha/kernel/traps.c
@@ -0,0 +1,1092 @@
+/*
+ * arch/alpha/kernel/traps.c
+ *
+ * (C) Copyright 1994 Linus Torvalds
+ */
+
+/*
+ * This file initializes the trap entry points
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kallsyms.h>
+
+#include <asm/gentrap.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+#include <asm/sysinfo.h>
+#include <asm/hwrpb.h>
+#include <asm/mmu_context.h>
+
+#include "proto.h"
+
+/* Work-around for some SRMs which mishandle opDEC faults. */
+
+static int opDEC_fix;
+
+static void __init
+opDEC_check(void)
+{
+ __asm__ __volatile__ (
+ /* Load the address of... */
+ " br $16, 1f\n"
+ /* A stub instruction fault handler. Just add 4 to the
+ pc and continue. */
+ " ldq $16, 8($sp)\n"
+ " addq $16, 4, $16\n"
+ " stq $16, 8($sp)\n"
+ " call_pal %[rti]\n"
+ /* Install the instruction fault handler. */
+ "1: lda $17, 3\n"
+ " call_pal %[wrent]\n"
+ /* With that in place, the fault from the round-to-minf fp
+ insn will arrive either at the "lda 4" insn (bad) or one
+ past that (good). This places the correct fixup in %0. */
+ " lda %[fix], 0\n"
+ " cvttq/svm $f31,$f31\n"
+ " lda %[fix], 4"
+ : [fix] "=r" (opDEC_fix)
+ : [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
+ : "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
+
+ if (opDEC_fix)
+ printk("opDEC fixup enabled.\n");
+}
+
+void
+dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
+{
+ printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx %s\n",
+ regs->pc, regs->r26, regs->ps, print_tainted());
+ print_symbol("pc is at %s\n", regs->pc);
+ print_symbol("ra is at %s\n", regs->r26 );
+ printk("v0 = %016lx t0 = %016lx t1 = %016lx\n",
+ regs->r0, regs->r1, regs->r2);
+ printk("t2 = %016lx t3 = %016lx t4 = %016lx\n",
+ regs->r3, regs->r4, regs->r5);
+ printk("t5 = %016lx t6 = %016lx t7 = %016lx\n",
+ regs->r6, regs->r7, regs->r8);
+
+ if (r9_15) {
+ printk("s0 = %016lx s1 = %016lx s2 = %016lx\n",
+ r9_15[9], r9_15[10], r9_15[11]);
+ printk("s3 = %016lx s4 = %016lx s5 = %016lx\n",
+ r9_15[12], r9_15[13], r9_15[14]);
+ printk("s6 = %016lx\n", r9_15[15]);
+ }
+
+ printk("a0 = %016lx a1 = %016lx a2 = %016lx\n",
+ regs->r16, regs->r17, regs->r18);
+ printk("a3 = %016lx a4 = %016lx a5 = %016lx\n",
+ regs->r19, regs->r20, regs->r21);
+ printk("t8 = %016lx t9 = %016lx t10= %016lx\n",
+ regs->r22, regs->r23, regs->r24);
+ printk("t11= %016lx pv = %016lx at = %016lx\n",
+ regs->r25, regs->r27, regs->r28);
+ printk("gp = %016lx sp = %p\n", regs->gp, regs+1);
+#if 0
+__halt();
+#endif
+}
+
+#if 0
+static char * ireg_name[] = {"v0", "t0", "t1", "t2", "t3", "t4", "t5", "t6",
+ "t7", "s0", "s1", "s2", "s3", "s4", "s5", "s6",
+ "a0", "a1", "a2", "a3", "a4", "a5", "t8", "t9",
+ "t10", "t11", "ra", "pv", "at", "gp", "sp", "zero"};
+#endif
+
+static void
+dik_show_code(unsigned int *pc)
+{
+ long i;
+
+ printk("Code:");
+ for (i = -6; i < 2; i++) {
+ unsigned int insn;
+ if (__get_user(insn, (unsigned int __user *)pc + i))
+ break;
+ printk("%c%08x%c", i ? ' ' : '<', insn, i ? ' ' : '>');
+ }
+ printk("\n");
+}
+
+static void
+dik_show_trace(unsigned long *sp)
+{
+ long i = 0;
+ printk("Trace:\n");
+ while (0x1ff8 & (unsigned long) sp) {
+ extern char _stext[], _etext[];
+ unsigned long tmp = *sp;
+ sp++;
+ if (tmp < (unsigned long) &_stext)
+ continue;
+ if (tmp >= (unsigned long) &_etext)
+ continue;
+ printk("[<%lx>]", tmp);
+ print_symbol(" %s", tmp);
+ printk("\n");
+ if (i > 40) {
+ printk(" ...");
+ break;
+ }
+ }
+ printk("\n");
+}
+
+static int kstack_depth_to_print = 24;
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+ unsigned long *stack;
+ int i;
+
+ /*
+ * debugging aid: "show_stack(NULL);" prints the
+ * back trace for this cpu.
+ */
+ if(sp==NULL)
+ sp=(unsigned long*)&sp;
+
+ stack = sp;
+ for(i=0; i < kstack_depth_to_print; i++) {
+ if (((long) stack & (THREAD_SIZE-1)) == 0)
+ break;
+ if (i && ((i % 4) == 0))
+ printk("\n ");
+ printk("%016lx ", *stack++);
+ }
+ printk("\n");
+ dik_show_trace(sp);
+}
+
+void dump_stack(void)
+{
+ show_stack(NULL, NULL);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void
+die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
+{
+ if (regs->ps & 8)
+ return;
+#ifdef CONFIG_SMP
+ printk("CPU %d ", hard_smp_processor_id());
+#endif
+ printk("%s(%d): %s %ld\n", current->comm, current->pid, str, err);
+ dik_show_regs(regs, r9_15);
+ dik_show_trace((unsigned long *)(regs+1));
+ dik_show_code((unsigned int *)regs->pc);
+
+ if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
+ printk("die_if_kernel recursion detected.\n");
+ local_irq_enable();
+ while (1);
+ }
+ do_exit(SIGSEGV);
+}
+
+#ifndef CONFIG_MATHEMU
+static long dummy_emul(void) { return 0; }
+long (*alpha_fp_emul_imprecise)(struct pt_regs *regs, unsigned long writemask)
+ = (void *)dummy_emul;
+long (*alpha_fp_emul) (unsigned long pc)
+ = (void *)dummy_emul;
+#else
+long alpha_fp_emul_imprecise(struct pt_regs *regs, unsigned long writemask);
+long alpha_fp_emul (unsigned long pc);
+#endif
+
+asmlinkage void
+do_entArith(unsigned long summary, unsigned long write_mask,
+ struct pt_regs *regs)
+{
+ long si_code = FPE_FLTINV;
+ siginfo_t info;
+
+ if (summary & 1) {
+ /* Software-completion summary bit is set, so try to
+ emulate the instruction. If the processor supports
+ precise exceptions, we don't have to search. */
+ if (!amask(AMASK_PRECISE_TRAP))
+ si_code = alpha_fp_emul(regs->pc - 4);
+ else
+ si_code = alpha_fp_emul_imprecise(regs, write_mask);
+ if (si_code == 0)
+ return;
+ }
+ die_if_kernel("Arithmetic fault", regs, 0, NULL);
+
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_code = si_code;
+ info.si_addr = (void __user *) regs->pc;
+ send_sig_info(SIGFPE, &info, current);
+}
+
+asmlinkage void
+do_entIF(unsigned long type, struct pt_regs *regs)
+{
+ siginfo_t info;
+ int signo, code;
+
+ if (regs->ps == 0) {
+ if (type == 1) {
+ const unsigned int *data
+ = (const unsigned int *) regs->pc;
+ printk("Kernel bug at %s:%d\n",
+ (const char *)(data[1] | (long)data[2] << 32),
+ data[0]);
+ }
+ die_if_kernel((type == 1 ? "Kernel Bug" : "Instruction fault"),
+ regs, type, NULL);
+ }
+
+ switch (type) {
+ case 0: /* breakpoint */
+ info.si_signo = SIGTRAP;
+ info.si_errno = 0;
+ info.si_code = TRAP_BRKPT;
+ info.si_trapno = 0;
+ info.si_addr = (void __user *) regs->pc;
+
+ if (ptrace_cancel_bpt(current)) {
+ regs->pc -= 4; /* make pc point to former bpt */
+ }
+
+ send_sig_info(SIGTRAP, &info, current);
+ return;
+
+ case 1: /* bugcheck */
+ info.si_signo = SIGTRAP;
+ info.si_errno = 0;
+ info.si_code = __SI_FAULT;
+ info.si_addr = (void __user *) regs->pc;
+ info.si_trapno = 0;
+ send_sig_info(SIGTRAP, &info, current);
+ return;
+
+ case 2: /* gentrap */
+ info.si_addr = (void __user *) regs->pc;
+ info.si_trapno = regs->r16;
+ switch ((long) regs->r16) {
+ case GEN_INTOVF:
+ signo = SIGFPE;
+ code = FPE_INTOVF;
+ break;
+ case GEN_INTDIV:
+ signo = SIGFPE;
+ code = FPE_INTDIV;
+ break;
+ case GEN_FLTOVF:
+ signo = SIGFPE;
+ code = FPE_FLTOVF;
+ break;
+ case GEN_FLTDIV:
+ signo = SIGFPE;
+ code = FPE_FLTDIV;
+ break;
+ case GEN_FLTUND:
+ signo = SIGFPE;
+ code = FPE_FLTUND;
+ break;
+ case GEN_FLTINV:
+ signo = SIGFPE;
+ code = FPE_FLTINV;
+ break;
+ case GEN_FLTINE:
+ signo = SIGFPE;
+ code = FPE_FLTRES;
+ break;
+ case GEN_ROPRAND:
+ signo = SIGFPE;
+ code = __SI_FAULT;
+ break;
+
+ case GEN_DECOVF:
+ case GEN_DECDIV:
+ case GEN_DECINV:
+ case GEN_ASSERTERR:
+ case GEN_NULPTRERR:
+ case GEN_STKOVF:
+ case GEN_STRLENERR:
+ case GEN_SUBSTRERR:
+ case GEN_RANGERR:
+ case GEN_SUBRNG:
+ case GEN_SUBRNG1:
+ case GEN_SUBRNG2:
+ case GEN_SUBRNG3:
+ case GEN_SUBRNG4:
+ case GEN_SUBRNG5:
+ case GEN_SUBRNG6:
+ case GEN_SUBRNG7:
+ default:
+ signo = SIGTRAP;
+ code = __SI_FAULT;
+ break;
+ }
+
+ info.si_signo = signo;
+ info.si_errno = 0;
+ info.si_code = code;
+ info.si_addr = (void __user *) regs->pc;
+ send_sig_info(signo, &info, current);
+ return;
+
+ case 4: /* opDEC */
+ if (implver() == IMPLVER_EV4) {
+ long si_code;
+
+ /* The some versions of SRM do not handle
+ the opDEC properly - they return the PC of the
+ opDEC fault, not the instruction after as the
+ Alpha architecture requires. Here we fix it up.
+ We do this by intentionally causing an opDEC
+ fault during the boot sequence and testing if
+ we get the correct PC. If not, we set a flag
+ to correct it every time through. */
+ regs->pc += opDEC_fix;
+
+ /* EV4 does not implement anything except normal
+ rounding. Everything else will come here as
+ an illegal instruction. Emulate them. */
+ si_code = alpha_fp_emul(regs->pc - 4);
+ if (si_code == 0)
+ return;
+ if (si_code > 0) {
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_code = si_code;
+ info.si_addr = (void __user *) regs->pc;
+ send_sig_info(SIGFPE, &info, current);
+ return;
+ }
+ }
+ break;
+
+ case 3: /* FEN fault */
+ /* Irritating users can call PAL_clrfen to disable the
+ FPU for the process. The kernel will then trap in
+ do_switch_stack and undo_switch_stack when we try
+ to save and restore the FP registers.
+
+ Given that GCC by default generates code that uses the
+ FP registers, PAL_clrfen is not useful except for DoS
+ attacks. So turn the bleeding FPU back on and be done
+ with it. */
+ current_thread_info()->pcb.flags |= 1;
+ __reload_thread(¤t_thread_info()->pcb);
+ return;
+
+ case 5: /* illoc */
+ default: /* unexpected instruction-fault type */
+ ;
+ }
+
+ info.si_signo = SIGILL;
+ info.si_errno = 0;
+ info.si_code = ILL_ILLOPC;
+ info.si_addr = (void __user *) regs->pc;
+ send_sig_info(SIGILL, &info, current);
+}
+
+/* There is an ifdef in the PALcode in MILO that enables a
+ "kernel debugging entry point" as an unprivileged call_pal.
+
+ We don't want to have anything to do with it, but unfortunately
+ several versions of MILO included in distributions have it enabled,
+ and if we don't put something on the entry point we'll oops. */
+
+asmlinkage void
+do_entDbg(struct pt_regs *regs)
+{
+ siginfo_t info;
+
+ die_if_kernel("Instruction fault", regs, 0, NULL);
+
+ info.si_signo = SIGILL;
+ info.si_errno = 0;
+ info.si_code = ILL_ILLOPC;
+ info.si_addr = (void __user *) regs->pc;
+ force_sig_info(SIGILL, &info, current);
+}
+
+
+/*
+ * entUna has a different register layout to be reasonably simple. It
+ * needs access to all the integer registers (the kernel doesn't use
+ * fp-regs), and it needs to have them in order for simpler access.
+ *
+ * Due to the non-standard register layout (and because we don't want
+ * to handle floating-point regs), user-mode unaligned accesses are
+ * handled separately by do_entUnaUser below.
+ *
+ * Oh, btw, we don't handle the "gp" register correctly, but if we fault
+ * on a gp-register unaligned load/store, something is _very_ wrong
+ * in the kernel anyway..
+ */
+struct allregs {
+ unsigned long regs[32];
+ unsigned long ps, pc, gp, a0, a1, a2;
+};
+
+struct unaligned_stat {
+ unsigned long count, va, pc;
+} unaligned[2];
+
+
+/* Macro for exception fixup code to access integer registers. */
+#define una_reg(r) (regs.regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+
+
+asmlinkage void
+do_entUna(void * va, unsigned long opcode, unsigned long reg,
+ unsigned long a3, unsigned long a4, unsigned long a5,
+ struct allregs regs)
+{
+ long error, tmp1, tmp2, tmp3, tmp4;
+ unsigned long pc = regs.pc - 4;
+ const struct exception_table_entry *fixup;
+
+ unaligned[0].count++;
+ unaligned[0].va = (unsigned long) va;
+ unaligned[0].pc = pc;
+
+ /* We don't want to use the generic get/put unaligned macros as
+ we want to trap exceptions. Only if we actually get an
+ exception will we decide whether we should have caught it. */
+
+ switch (opcode) {
+ case 0x0c: /* ldwu */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,1(%3)\n"
+ " extwl %1,%3,%1\n"
+ " extwh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto got_exception;
+ una_reg(reg) = tmp1|tmp2;
+ return;
+
+ case 0x28: /* ldl */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,3(%3)\n"
+ " extll %1,%3,%1\n"
+ " extlh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto got_exception;
+ una_reg(reg) = (int)(tmp1|tmp2);
+ return;
+
+ case 0x29: /* ldq */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,7(%3)\n"
+ " extql %1,%3,%1\n"
+ " extqh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto got_exception;
+ una_reg(reg) = tmp1|tmp2;
+ return;
+
+ /* Note that the store sequences do not indicate that they change
+ memory because it _should_ be affecting nothing in this context.
+ (Otherwise we have other, much larger, problems.) */
+ case 0x0d: /* stw */
+ __asm__ __volatile__(
+ "1: ldq_u %2,1(%5)\n"
+ "2: ldq_u %1,0(%5)\n"
+ " inswh %6,%5,%4\n"
+ " inswl %6,%5,%3\n"
+ " mskwh %2,%5,%2\n"
+ " mskwl %1,%5,%1\n"
+ " or %2,%4,%2\n"
+ " or %1,%3,%1\n"
+ "3: stq_u %2,1(%5)\n"
+ "4: stq_u %1,0(%5)\n"
+ "5:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %2,5b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %1,5b-2b(%0)\n"
+ " .long 3b - .\n"
+ " lda $31,5b-3b(%0)\n"
+ " .long 4b - .\n"
+ " lda $31,5b-4b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+ "=&r"(tmp3), "=&r"(tmp4)
+ : "r"(va), "r"(una_reg(reg)), "0"(0));
+ if (error)
+ goto got_exception;
+ return;
+
+ case 0x2c: /* stl */
+ __asm__ __volatile__(
+ "1: ldq_u %2,3(%5)\n"
+ "2: ldq_u %1,0(%5)\n"
+ " inslh %6,%5,%4\n"
+ " insll %6,%5,%3\n"
+ " msklh %2,%5,%2\n"
+ " mskll %1,%5,%1\n"
+ " or %2,%4,%2\n"
+ " or %1,%3,%1\n"
+ "3: stq_u %2,3(%5)\n"
+ "4: stq_u %1,0(%5)\n"
+ "5:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %2,5b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %1,5b-2b(%0)\n"
+ " .long 3b - .\n"
+ " lda $31,5b-3b(%0)\n"
+ " .long 4b - .\n"
+ " lda $31,5b-4b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+ "=&r"(tmp3), "=&r"(tmp4)
+ : "r"(va), "r"(una_reg(reg)), "0"(0));
+ if (error)
+ goto got_exception;
+ return;
+
+ case 0x2d: /* stq */
+ __asm__ __volatile__(
+ "1: ldq_u %2,7(%5)\n"
+ "2: ldq_u %1,0(%5)\n"
+ " insqh %6,%5,%4\n"
+ " insql %6,%5,%3\n"
+ " mskqh %2,%5,%2\n"
+ " mskql %1,%5,%1\n"
+ " or %2,%4,%2\n"
+ " or %1,%3,%1\n"
+ "3: stq_u %2,7(%5)\n"
+ "4: stq_u %1,0(%5)\n"
+ "5:\n"
+ ".section __ex_table,\"a\"\n\t"
+ " .long 1b - .\n"
+ " lda %2,5b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %1,5b-2b(%0)\n"
+ " .long 3b - .\n"
+ " lda $31,5b-3b(%0)\n"
+ " .long 4b - .\n"
+ " lda $31,5b-4b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+ "=&r"(tmp3), "=&r"(tmp4)
+ : "r"(va), "r"(una_reg(reg)), "0"(0));
+ if (error)
+ goto got_exception;
+ return;
+ }
+
+ lock_kernel();
+ printk("Bad unaligned kernel access at %016lx: %p %lx %ld\n",
+ pc, va, opcode, reg);
+ do_exit(SIGSEGV);
+
+got_exception:
+ /* Ok, we caught the exception, but we don't want it. Is there
+ someone to pass it along to? */
+ if ((fixup = search_exception_tables(pc)) != 0) {
+ unsigned long newpc;
+ newpc = fixup_exception(una_reg, fixup, pc);
+
+ printk("Forwarding unaligned exception at %lx (%lx)\n",
+ pc, newpc);
+
+ (®s)->pc = newpc;
+ return;
+ }
+
+ /*
+ * Yikes! No one to forward the exception to.
+ * Since the registers are in a weird format, dump them ourselves.
+ */
+ lock_kernel();
+
+ printk("%s(%d): unhandled unaligned exception\n",
+ current->comm, current->pid);
+
+ printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx\n",
+ pc, una_reg(26), regs.ps);
+ printk("r0 = %016lx r1 = %016lx r2 = %016lx\n",
+ una_reg(0), una_reg(1), una_reg(2));
+ printk("r3 = %016lx r4 = %016lx r5 = %016lx\n",
+ una_reg(3), una_reg(4), una_reg(5));
+ printk("r6 = %016lx r7 = %016lx r8 = %016lx\n",
+ una_reg(6), una_reg(7), una_reg(8));
+ printk("r9 = %016lx r10= %016lx r11= %016lx\n",
+ una_reg(9), una_reg(10), una_reg(11));
+ printk("r12= %016lx r13= %016lx r14= %016lx\n",
+ una_reg(12), una_reg(13), una_reg(14));
+ printk("r15= %016lx\n", una_reg(15));
+ printk("r16= %016lx r17= %016lx r18= %016lx\n",
+ una_reg(16), una_reg(17), una_reg(18));
+ printk("r19= %016lx r20= %016lx r21= %016lx\n",
+ una_reg(19), una_reg(20), una_reg(21));
+ printk("r22= %016lx r23= %016lx r24= %016lx\n",
+ una_reg(22), una_reg(23), una_reg(24));
+ printk("r25= %016lx r27= %016lx r28= %016lx\n",
+ una_reg(25), una_reg(27), una_reg(28));
+ printk("gp = %016lx sp = %p\n", regs.gp, ®s+1);
+
+ dik_show_code((unsigned int *)pc);
+ dik_show_trace((unsigned long *)(®s+1));
+
+ if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
+ printk("die_if_kernel recursion detected.\n");
+ local_irq_enable();
+ while (1);
+ }
+ do_exit(SIGSEGV);
+}
+
+/*
+ * Convert an s-floating point value in memory format to the
+ * corresponding value in register format. The exponent
+ * needs to be remapped to preserve non-finite values
+ * (infinities, not-a-numbers, denormals).
+ */
+static inline unsigned long
+s_mem_to_reg (unsigned long s_mem)
+{
+ unsigned long frac = (s_mem >> 0) & 0x7fffff;
+ unsigned long sign = (s_mem >> 31) & 0x1;
+ unsigned long exp_msb = (s_mem >> 30) & 0x1;
+ unsigned long exp_low = (s_mem >> 23) & 0x7f;
+ unsigned long exp;
+
+ exp = (exp_msb << 10) | exp_low; /* common case */
+ if (exp_msb) {
+ if (exp_low == 0x7f) {
+ exp = 0x7ff;
+ }
+ } else {
+ if (exp_low == 0x00) {
+ exp = 0x000;
+ } else {
+ exp |= (0x7 << 7);
+ }
+ }
+ return (sign << 63) | (exp << 52) | (frac << 29);
+}
+
+/*
+ * Convert an s-floating point value in register format to the
+ * corresponding value in memory format.
+ */
+static inline unsigned long
+s_reg_to_mem (unsigned long s_reg)
+{
+ return ((s_reg >> 62) << 30) | ((s_reg << 5) >> 34);
+}
+
+/*
+ * Handle user-level unaligned fault. Handling user-level unaligned
+ * faults is *extremely* slow and produces nasty messages. A user
+ * program *should* fix unaligned faults ASAP.
+ *
+ * Notice that we have (almost) the regular kernel stack layout here,
+ * so finding the appropriate registers is a little more difficult
+ * than in the kernel case.
+ *
+ * Finally, we handle regular integer load/stores only. In
+ * particular, load-linked/store-conditionally and floating point
+ * load/stores are not supported. The former make no sense with
+ * unaligned faults (they are guaranteed to fail) and I don't think
+ * the latter will occur in any decent program.
+ *
+ * Sigh. We *do* have to handle some FP operations, because GCC will
+ * uses them as temporary storage for integer memory to memory copies.
+ * However, we need to deal with stt/ldt and sts/lds only.
+ */
+
+#define OP_INT_MASK ( 1L << 0x28 | 1L << 0x2c /* ldl stl */ \
+ | 1L << 0x29 | 1L << 0x2d /* ldq stq */ \
+ | 1L << 0x0c | 1L << 0x0d /* ldwu stw */ \
+ | 1L << 0x0a | 1L << 0x0e ) /* ldbu stb */
+
+#define OP_WRITE_MASK ( 1L << 0x26 | 1L << 0x27 /* sts stt */ \
+ | 1L << 0x2c | 1L << 0x2d /* stl stq */ \
+ | 1L << 0x0d | 1L << 0x0e ) /* stw stb */
+
+#define R(x) ((size_t) &((struct pt_regs *)0)->x)
+
+static int unauser_reg_offsets[32] = {
+ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
+ /* r9 ... r15 are stored in front of regs. */
+ -56, -48, -40, -32, -24, -16, -8,
+ R(r16), R(r17), R(r18),
+ R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
+ R(r27), R(r28), R(gp),
+ 0, 0
+};
+
+#undef R
+
+asmlinkage void
+do_entUnaUser(void __user * va, unsigned long opcode,
+ unsigned long reg, struct pt_regs *regs)
+{
+ static int cnt = 0;
+ static long last_time = 0;
+
+ unsigned long tmp1, tmp2, tmp3, tmp4;
+ unsigned long fake_reg, *reg_addr = &fake_reg;
+ siginfo_t info;
+ long error;
+
+ /* Check the UAC bits to decide what the user wants us to do
+ with the unaliged access. */
+
+ if (!test_thread_flag (TIF_UAC_NOPRINT)) {
+ if (cnt >= 5 && jiffies - last_time > 5*HZ) {
+ cnt = 0;
+ }
+ if (++cnt < 5) {
+ printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
+ current->comm, current->pid,
+ regs->pc - 4, va, opcode, reg);
+ }
+ last_time = jiffies;
+ }
+ if (test_thread_flag (TIF_UAC_SIGBUS))
+ goto give_sigbus;
+ /* Not sure why you'd want to use this, but... */
+ if (test_thread_flag (TIF_UAC_NOFIX))
+ return;
+
+ /* Don't bother reading ds in the access check since we already
+ know that this came from the user. Also rely on the fact that
+ the page at TASK_SIZE is unmapped and so can't be touched anyway. */
+ if (!__access_ok((unsigned long)va, 0, USER_DS))
+ goto give_sigsegv;
+
+ ++unaligned[1].count;
+ unaligned[1].va = (unsigned long)va;
+ unaligned[1].pc = regs->pc - 4;
+
+ if ((1L << opcode) & OP_INT_MASK) {
+ /* it's an integer load/store */
+ if (reg < 30) {
+ reg_addr = (unsigned long *)
+ ((char *)regs + unauser_reg_offsets[reg]);
+ } else if (reg == 30) {
+ /* usp in PAL regs */
+ fake_reg = rdusp();
+ } else {
+ /* zero "register" */
+ fake_reg = 0;
+ }
+ }
+
+ /* We don't want to use the generic get/put unaligned macros as
+ we want to trap exceptions. Only if we actually get an
+ exception will we decide whether we should have caught it. */
+
+ switch (opcode) {
+ case 0x0c: /* ldwu */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,1(%3)\n"
+ " extwl %1,%3,%1\n"
+ " extwh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ *reg_addr = tmp1|tmp2;
+ break;
+
+ case 0x22: /* lds */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,3(%3)\n"
+ " extll %1,%3,%1\n"
+ " extlh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ alpha_write_fp_reg(reg, s_mem_to_reg((int)(tmp1|tmp2)));
+ return;
+
+ case 0x23: /* ldt */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,7(%3)\n"
+ " extql %1,%3,%1\n"
+ " extqh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ alpha_write_fp_reg(reg, tmp1|tmp2);
+ return;
+
+ case 0x28: /* ldl */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,3(%3)\n"
+ " extll %1,%3,%1\n"
+ " extlh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ *reg_addr = (int)(tmp1|tmp2);
+ break;
+
+ case 0x29: /* ldq */
+ __asm__ __volatile__(
+ "1: ldq_u %1,0(%3)\n"
+ "2: ldq_u %2,7(%3)\n"
+ " extql %1,%3,%1\n"
+ " extqh %2,%3,%2\n"
+ "3:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %1,3b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %2,3b-2b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2)
+ : "r"(va), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ *reg_addr = tmp1|tmp2;
+ break;
+
+ /* Note that the store sequences do not indicate that they change
+ memory because it _should_ be affecting nothing in this context.
+ (Otherwise we have other, much larger, problems.) */
+ case 0x0d: /* stw */
+ __asm__ __volatile__(
+ "1: ldq_u %2,1(%5)\n"
+ "2: ldq_u %1,0(%5)\n"
+ " inswh %6,%5,%4\n"
+ " inswl %6,%5,%3\n"
+ " mskwh %2,%5,%2\n"
+ " mskwl %1,%5,%1\n"
+ " or %2,%4,%2\n"
+ " or %1,%3,%1\n"
+ "3: stq_u %2,1(%5)\n"
+ "4: stq_u %1,0(%5)\n"
+ "5:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %2,5b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %1,5b-2b(%0)\n"
+ " .long 3b - .\n"
+ " lda $31,5b-3b(%0)\n"
+ " .long 4b - .\n"
+ " lda $31,5b-4b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+ "=&r"(tmp3), "=&r"(tmp4)
+ : "r"(va), "r"(*reg_addr), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ return;
+
+ case 0x26: /* sts */
+ fake_reg = s_reg_to_mem(alpha_read_fp_reg(reg));
+ /* FALLTHRU */
+
+ case 0x2c: /* stl */
+ __asm__ __volatile__(
+ "1: ldq_u %2,3(%5)\n"
+ "2: ldq_u %1,0(%5)\n"
+ " inslh %6,%5,%4\n"
+ " insll %6,%5,%3\n"
+ " msklh %2,%5,%2\n"
+ " mskll %1,%5,%1\n"
+ " or %2,%4,%2\n"
+ " or %1,%3,%1\n"
+ "3: stq_u %2,3(%5)\n"
+ "4: stq_u %1,0(%5)\n"
+ "5:\n"
+ ".section __ex_table,\"a\"\n"
+ " .long 1b - .\n"
+ " lda %2,5b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %1,5b-2b(%0)\n"
+ " .long 3b - .\n"
+ " lda $31,5b-3b(%0)\n"
+ " .long 4b - .\n"
+ " lda $31,5b-4b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+ "=&r"(tmp3), "=&r"(tmp4)
+ : "r"(va), "r"(*reg_addr), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ return;
+
+ case 0x27: /* stt */
+ fake_reg = alpha_read_fp_reg(reg);
+ /* FALLTHRU */
+
+ case 0x2d: /* stq */
+ __asm__ __volatile__(
+ "1: ldq_u %2,7(%5)\n"
+ "2: ldq_u %1,0(%5)\n"
+ " insqh %6,%5,%4\n"
+ " insql %6,%5,%3\n"
+ " mskqh %2,%5,%2\n"
+ " mskql %1,%5,%1\n"
+ " or %2,%4,%2\n"
+ " or %1,%3,%1\n"
+ "3: stq_u %2,7(%5)\n"
+ "4: stq_u %1,0(%5)\n"
+ "5:\n"
+ ".section __ex_table,\"a\"\n\t"
+ " .long 1b - .\n"
+ " lda %2,5b-1b(%0)\n"
+ " .long 2b - .\n"
+ " lda %1,5b-2b(%0)\n"
+ " .long 3b - .\n"
+ " lda $31,5b-3b(%0)\n"
+ " .long 4b - .\n"
+ " lda $31,5b-4b(%0)\n"
+ ".previous"
+ : "=r"(error), "=&r"(tmp1), "=&r"(tmp2),
+ "=&r"(tmp3), "=&r"(tmp4)
+ : "r"(va), "r"(*reg_addr), "0"(0));
+ if (error)
+ goto give_sigsegv;
+ return;
+
+ default:
+ /* What instruction were you trying to use, exactly? */
+ goto give_sigbus;
+ }
+
+ /* Only integer loads should get here; everyone else returns early. */
+ if (reg == 30)
+ wrusp(fake_reg);
+ return;
+
+give_sigsegv:
+ regs->pc -= 4; /* make pc point to faulting insn */
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+
+ /* We need to replicate some of the logic in mm/fault.c,
+ since we don't have access to the fault code in the
+ exception handling return path. */
+ if (!__access_ok((unsigned long)va, 0, USER_DS))
+ info.si_code = SEGV_ACCERR;
+ else {
+ struct mm_struct *mm = current->mm;
+ down_read(&mm->mmap_sem);
+ if (find_vma(mm, (unsigned long)va))
+ info.si_code = SEGV_ACCERR;
+ else
+ info.si_code = SEGV_MAPERR;
+ up_read(&mm->mmap_sem);
+ }
+ info.si_addr = va;
+ send_sig_info(SIGSEGV, &info, current);
+ return;
+
+give_sigbus:
+ regs->pc -= 4;
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRALN;
+ info.si_addr = va;
+ send_sig_info(SIGBUS, &info, current);
+ return;
+}
+
+void __init
+trap_init(void)
+{
+ /* Tell PAL-code what global pointer we want in the kernel. */
+ register unsigned long gptr __asm__("$29");
+ wrkgp(gptr);
+
+ /* Hack for Multia (UDB) and JENSEN: some of their SRMs have
+ a bug in the handling of the opDEC fault. Fix it up if so. */
+ if (implver() == IMPLVER_EV4)
+ opDEC_check();
+
+ wrent(entArith, 1);
+ wrent(entMM, 2);
+ wrent(entIF, 3);
+ wrent(entUna, 4);
+ wrent(entSys, 5);
+ wrent(entDbg, 6);
+}