Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
new file mode 100644
index 0000000..6b505ce
--- /dev/null
+++ b/arch/arm/boot/compressed/Makefile
@@ -0,0 +1,114 @@
+#
+# linux/arch/arm/boot/compressed/Makefile
+#
+# create a compressed vmlinuz image from the original vmlinux
+#
+
+HEAD = head.o
+OBJS = misc.o
+FONTC = drivers/video/console/font_acorn_8x8.c
+
+FONT = $(addprefix ../../../../drivers/video/console/, font_acorn_8x8.o)
+
+#
+# Architecture dependencies
+#
+ifeq ($(CONFIG_ARCH_ACORN),y)
+OBJS += ll_char_wr.o $(FONT)
+endif
+
+ifeq ($(CONFIG_ARCH_SHARK),y)
+OBJS += head-shark.o ofw-shark.o
+endif
+
+ifeq ($(CONFIG_ARCH_CAMELOT),y)
+OBJS += head-epxa10db.o
+endif
+
+ifeq ($(CONFIG_ARCH_L7200),y)
+OBJS += head-l7200.o
+endif
+
+ifeq ($(CONFIG_ARCH_CLPS7500),y)
+HEAD = head-clps7500.o
+endif
+
+ifeq ($(CONFIG_ARCH_P720T),y)
+# Borrow this code from SA1100
+OBJS += head-sa1100.o
+endif
+
+ifeq ($(CONFIG_ARCH_SA1100),y)
+OBJS += head-sa1100.o
+endif
+
+ifeq ($(CONFIG_CPU_XSCALE),y)
+OBJS += head-xscale.o
+endif
+
+ifeq ($(CONFIG_PXA_SHARPSL),y)
+OBJS += head-sharpsl.o
+endif
+
+ifeq ($(CONFIG_DEBUG_ICEDCC),y)
+OBJS += ice-dcc.o
+endif
+
+ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+OBJS += big-endian.o
+endif
+
+#
+# We now have a PIC decompressor implementation. Decompressors running
+# from RAM should not define ZTEXTADDR. Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
+# FIXME: Previous assignment to ztextaddr-y is lost here. See SHARK
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+ZTEXTADDR := $(CONFIG_ZBOOT_ROM_TEXT)
+ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS)
+else
+ZTEXTADDR := 0
+ZBSSADDR := ALIGN(4)
+endif
+
+SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+
+targets := vmlinux vmlinux.lds piggy.gz piggy.o $(FONT) \
+ head.o misc.o $(OBJS)
+EXTRA_CFLAGS := -fpic
+EXTRA_AFLAGS :=
+
+# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
+# linker symbols. We only define initrd_phys and params_phys if the
+# machine class defined the corresponding makefile variable.
+LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifneq ($(INITRD_PHYS),)
+LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
+endif
+ifneq ($(PARAMS_PHYS),)
+LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
+endif
+LDFLAGS_vmlinux += -p --no-undefined -X \
+ $(shell $(CC) $(CFLAGS) --print-libgcc-file-name) -T
+
+# Don't allow any static data in misc.o, which
+# would otherwise mess up our GOT table
+CFLAGS_misc.o := -Dstatic=
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+ $(addprefix $(obj)/, $(OBJS)) FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/piggy.gz: $(obj)/../Image FORCE
+ $(call if_changed,gzip)
+
+$(obj)/piggy.o: $(obj)/piggy.gz FORCE
+
+CFLAGS_font_acorn_8x8.o := -Dstatic=
+
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+ @sed "$(SEDFLAGS)" < $< > $@
+
+$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c
+
diff --git a/arch/arm/boot/compressed/Makefile.debug b/arch/arm/boot/compressed/Makefile.debug
new file mode 100644
index 0000000..491a037
--- /dev/null
+++ b/arch/arm/boot/compressed/Makefile.debug
@@ -0,0 +1,23 @@
+#
+# linux/arch/arm/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+COMPRESSED_EXTRA=../../lib/ll_char_wr.o
+OBJECTS=misc-debug.o ll_char_wr.aout.o
+
+CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c
+
+test-gzip: piggy.aout.o $(OBJECTS)
+ $(CC) -o $@ $(OBJECTS) piggy.aout.o
+
+misc-debug.o: misc.c
+ $(CC) $(CFLAGS) -o $@ misc.c
+
+piggy.aout.o: piggy.o
+ arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o
+
+ll_char_wr.aout.o: $(COMPRESSED_EXTRA)
+ arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o
+
diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
new file mode 100644
index 0000000..25ab26f
--- /dev/null
+++ b/arch/arm/boot/compressed/big-endian.S
@@ -0,0 +1,13 @@
+/*
+ * linux/arch/arm/boot/compressed/big-endian.S
+ *
+ * Switch CPU into big endian mode.
+ * Author: Nicolas Pitre
+ */
+
+ .section ".start", #alloc, #execinstr
+
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ orr r0, r0, #(1 << 7) @ enable big endian mode
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
new file mode 100644
index 0000000..4a8a689
--- /dev/null
+++ b/arch/arm/boot/compressed/head-clps7500.S
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/arm/boot/compressed/head.S
+ *
+ * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
+ */
+
+#include <linux/config.h>
+
+ /* There are three different ways the kernel can be
+ booted on a 7500 system: from Angel (loaded in RAM), from
+ 16-bit ROM or from 32-bit Flash. Luckily, a single kernel
+ image does for them all. */
+ /* This branch is taken if the CPU memory width matches the
+ actual device in use. The default at power on is 16 bits
+ so we must be prepared for a mismatch. */
+ .section ".start", "ax"
+2:
+ b 1f
+ .word 0xffff
+ .word 0xb632 @ mov r11, #0x03200000
+ .word 0xe3a0
+ .word 0x0000 @ mov r0, #0
+ .word 0xe3a0
+ .word 0x0080 @ strb r0, [r11, #0x80]
+ .word 0xe5cb
+ .word 0xf000 @ mov pc, #0
+ .word 0xe3a0
+1:
+ adr r1, 2b
+ teq r1, #0
+ bne .Langel
+ /* This is a direct-from-ROM boot. Copy the kernel into
+ RAM and run it there. */
+ mov r0, #0x30
+ mcr p15, 0, r0, c1, c0, 0
+ mov r0, #0x13
+ msr cpsr_cxsf, r0
+ mov r12, #0x03000000 @ point to LEDs
+ orr r12, r12, #0x00020000
+ orr r12, r12, #0xba00
+ mov r0, #0x5500
+ str r0, [r12]
+ mov r0, #0x10000000
+ orr r0, r0, #0x8000
+ mov r4, r0
+ ldr r2, =_end
+2:
+ ldr r3, [r1], #4
+ str r3, [r0], #4
+ teq r0, r2
+ bne 2b
+ mov r0, #0xff00
+ str r0, [r12]
+1:
+ mov r12, #0x03000000 @ point to LEDs
+ orr r12, r12, #0x00020000
+ orr r12, r12, #0xba00
+ mov r0, #0xfe00
+ str r0, [r12]
+
+ adr lr, 1f
+ mov r0, #0
+ mov r1, #14 /* MACH_TYPE_CLPS7500 */
+ mov pc, lr
+.Langel:
+#ifdef CONFIG_ANGELBOOT
+ /* Call Angel to switch into SVC mode. */
+ mov r0, #0x17
+ swi 0x123456
+#endif
+ /* Ensure all interrupts are off and MMU disabled */
+ mrs r0, cpsr
+ orr r0, r0, #0xc0
+ msr cpsr_cxsf, r0
+
+ adr lr, 1b
+ orr lr, lr, #0x10000000
+ mov r0, #0x30 @ MMU off
+ mcr p15, 0, r0, c1, c0, 0
+ mov r0, r0
+ mov pc, lr
+
+ .ltorg
+
+1:
+/* And the rest */
+#include "head.S"
diff --git a/arch/arm/boot/compressed/head-epxa10db.S b/arch/arm/boot/compressed/head-epxa10db.S
new file mode 100644
index 0000000..757681f
--- /dev/null
+++ b/arch/arm/boot/compressed/head-epxa10db.S
@@ -0,0 +1,5 @@
+#include <asm/mach-types.h>
+#include <asm/arch/excalibur.h>
+
+ .section ".start", "ax"
+ mov r7, #MACH_TYPE_CAMELOT
diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S
new file mode 100644
index 0000000..b08bd23
--- /dev/null
+++ b/arch/arm/boot/compressed/head-l7200.S
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/arm/boot/compressed/head-l7200.S
+ *
+ * Copyright (C) 2000 Steve Hill <sjhill@cotw.com>
+ *
+ * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This
+ * is merged with head.S by the linker.
+ */
+
+#include <linux/config.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_ARCH_L7200
+#error What am I doing here...
+#endif
+
+ .section ".start", "ax"
+
+__L7200_start:
+ mov r0, #0x00100000 @ FLASH address of initrd
+ mov r2, #0xf1000000 @ RAM address of initrd
+ add r3, r2, #0x00700000 @ Size of initrd
+1:
+ ldmia r0!, {r4, r5, r6, r7}
+ stmia r2!, {r4, r5, r6, r7}
+ cmp r2, r3
+ ble 1b
+
+ mov r8, #0 @ Zero it out
+ mov r7, #MACH_TYPE_L7200 @ Set architecture ID
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
new file mode 100644
index 0000000..5aefffd
--- /dev/null
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/arm/boot/compressed/head-sa1100.S
+ *
+ * Copyright (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * SA1100 specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+ .section ".start", "ax"
+
+__SA1100_start:
+
+ @ Preserve r8/r7 i.e. kernel entry values
+#ifdef CONFIG_SA1100_COLLIE
+ mov r7, #MACH_TYPE_COLLIE
+#endif
+#ifdef CONFIG_SA1100_SIMPAD
+ @ UNTIL we've something like an open bootldr
+ mov r7, #MACH_TYPE_SIMPAD @should be 87
+#endif
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ ands r0, r0, #0x0d
+ beq 99f
+
+ @ Data cache might be active.
+ @ Be sure to flush kernel binary out of the cache,
+ @ whatever state it is, before it is turned off.
+ @ This is done by fetching through currently executed
+ @ memory to be sure we hit the same cache.
+ bic r2, pc, #0x1f
+ add r3, r2, #0x4000 @ 16 kb is quite enough...
+1: ldr r0, [r2], #32
+ teq r2, r3
+ bne 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches
+
+ @ disabling MMU and caches
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ bic r0, r0, #0x0d @ clear WB, DC, MMU
+ bic r0, r0, #0x1000 @ clear Icache
+ mcr p15, 0, r0, c1, c0, 0
+99:
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
new file mode 100644
index 0000000..848f60e
--- /dev/null
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -0,0 +1,115 @@
+/* The head-file for the Shark
+ * by Alexander Schulz
+ *
+ * Does the following:
+ * - get the memory layout from firmware. This can only be done as long as the mmu
+ * is still on.
+ * - switch the mmu off, so we have physical addresses
+ * - copy the kernel to 0x08508000. This is done to have a fixed address where the
+ * C-parts (misc.c) are executed. This address must be known at compile-time,
+ * but the load-address of the kernel depends on how much memory is installed.
+ * - Jump to this location.
+ * - Set r8 with 0, r7 with the architecture ID for head.S
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+ .section ".start", "ax"
+
+ b __beginning
+
+__ofw_data: .long 0 @ the number of memory blocks
+ .space 128 @ (startaddr,size) ...
+ .space 128 @ bootargs
+ .align
+
+__beginning: mov r4, r0 @ save the entry to the firmware
+
+ mov r0, #0xC0 @ disable irq and fiq
+ mov r1, r0
+ mrs r3, cpsr
+ bic r2, r3, r0
+ eor r2, r2, r1
+ msr cpsr_c, r2
+
+ mov r0, r4 @ get the Memory layout from firmware
+ adr r1, __ofw_data
+ add r2, r1, #4
+ mov lr, pc
+ b ofw_init
+ mov r1, #0
+
+ adr r2, __mmu_off @ calculate physical address
+ sub r2, r2, #0xf0000000 @ openprom maps us at f000 virt, 0e50 phys
+ adr r0, __ofw_data
+ ldr r0, [r0, #4]
+ add r2, r2, r0
+ add r2, r2, #0x00500000
+
+ mrc p15, 0, r3, c1, c0
+ bic r3, r3, #0xC @ Write Buffer and DCache
+ bic r3, r3, #0x1000 @ ICache
+ mcr p15, 0, r3, c1, c0 @ disabled
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ flush I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+ mcr p15, 0, r0, c8, c7 @ flush I,D TLBs on v4
+
+ bic r3, r3, #0x1 @ MMU
+ mcr p15, 0, r3, c1, c0 @ disabled
+
+ mov pc, r2
+
+__copy_target: .long 0x08508000
+__copy_end: .long 0x08608000
+
+ .word _start
+ .word __bss_start
+
+ .align
+__temp_stack: .space 128
+
+__mmu_off:
+ adr r0, __ofw_data
+ ldr r0, [r0, #4]
+ orr r0, r0, #0x00600000
+
+ ldr r1, __copy_end
+ ldr r3, __copy_target
+
+/* r0 = 0x0e600000 (current end of kernelcode)
+ * r3 = 0x08508000 (where it should begin)
+ * r1 = 0x08608000 (end of copying area, 1MB)
+ * The kernel is compressed, so 1 MB should be enough.
+ * copy the kernel to the beginning of physical memory
+ * We start from the highest address, so we can copy
+ * from 0x08500000 to 0x08508000 if we have only 8MB
+ */
+
+
+__Copy: ldr r2, [r0], #-4
+ str r2, [r1], #-4
+ teq r1, r3
+ bne __Copy
+ /* and jump to it */
+ adr r2, __go_on
+ adr r0, __ofw_data
+ ldr r0, [r0, #4]
+ sub r2, r2, r0
+ sub r2, r2, #0x00500000
+ ldr r0, __copy_target
+ add r2, r2, r0
+ mov pc, r2
+
+__go_on:
+ adr sp, __temp_stack
+ add sp, sp, #128
+ adr r0, __ofw_data
+ mov lr, pc
+ b create_params
+
+ mov r8, #0
+ mov r7, #15
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S
new file mode 100644
index 0000000..d6bf8a2
--- /dev/null
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -0,0 +1,92 @@
+/*
+ * linux/arch/arm/boot/compressed/head-sharpsl.S
+ *
+ * Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
+ *
+ * Sharp's bootloader doesn't pass any kind of machine ID
+ * so we have to figure out the machine for ourselves...
+ *
+ * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
+ * and Husky (SL-C760).
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_PXA_SHARPSL
+#error What am I doing here...
+#endif
+
+ .section ".start", "ax"
+
+__SharpSL_start:
+
+ ldr r1, .W100ADDR @ Base address of w100 chip + regs offset
+
+ mov r6, #0x31 @ Load Magic Init value
+ str r6, [r1, #0x280] @ to SCRATCH_UMSK
+ mov r5, #0x3000
+.W100LOOP:
+ subs r5, r5, #1
+ bne .W100LOOP
+ mov r6, #0x30 @ Load 2nd Magic Init value
+ str r6, [r1, #0x280] @ to SCRATCH_UMSK
+
+ ldr r6, [r1, #0] @ Load Chip ID
+ ldr r3, .W100ID
+ ldr r7, .POODLEID
+ cmp r6, r3
+ bne .SHARPEND @ We have no w100 - Poodle
+
+ mrc p15, 0, r6, c0, c0 @ Get Processor ID
+ and r6, r6, #0xffffff00
+ ldr r7, .CORGIID
+ ldr r3, .PXA255ID
+ cmp r6, r3
+ blo .SHARPEND @ We have a PXA250 - Corgi
+
+ mov r1, #0x0c000000 @ Base address of NAND chip
+ ldrb r3, [r1, #24] @ Load FLASHCTL
+ bic r3, r3, #0x11 @ SET NCE
+ orr r3, r3, #0x0a @ SET CLR + FLWP
+ strb r3, [r1, #24] @ Save to FLASHCTL
+ mov r2, #0x90 @ Command "readid"
+ strb r2, [r1, #20] @ Save to FLASHIO
+ bic r3, r3, #2 @ CLR CLE
+ orr r3, r3, #4 @ SET ALE
+ strb r3, [r1, #24] @ Save to FLASHCTL
+ mov r2, #0 @ Address 0x00
+ strb r2, [r1, #20] @ Save to FLASHIO
+ bic r3, r3, #4 @ CLR ALE
+ strb r3, [r1, #24] @ Save to FLASHCTL
+.SHARP1:
+ ldrb r3, [r1, #24] @ Load FLASHCTL
+ tst r3, #32 @ Is chip ready?
+ beq .SHARP1
+ ldrb r2, [r1, #20] @ NAND Manufacturer ID
+ ldrb r3, [r1, #20] @ NAND Chip ID
+ ldr r7, .SHEPHERDID
+ cmp r3, #0x76 @ 64MiB flash
+ beq .SHARPEND @ We have Shepherd
+ ldr r7, .HUSKYID @ Must be Husky
+ b .SHARPEND
+
+.PXA255ID:
+ .word 0x69052d00 @ PXA255 Processor ID
+.W100ID:
+ .word 0x57411002 @ w100 Chip ID
+.W100ADDR:
+ .word 0x08010000 @ w100 Chip ID Reg Address
+.POODLEID:
+ .word MACH_TYPE_POODLE
+.CORGIID:
+ .word MACH_TYPE_CORGI
+.SHEPHERDID:
+ .word MACH_TYPE_SHEPHERD
+.HUSKYID:
+ .word MACH_TYPE_HUSKY
+.SHARPEND:
+
+
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
new file mode 100644
index 0000000..665bd2c
--- /dev/null
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/boot/compressed/head-xscale.S
+ *
+ * XScale specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+ .section ".start", "ax"
+
+__XScale_start:
+
+ @ Preserve r8/r7 i.e. kernel entry values
+
+ @ Data cache might be active.
+ @ Be sure to flush kernel binary out of the cache,
+ @ whatever state it is, before it is turned off.
+ @ This is done by fetching through currently executed
+ @ memory to be sure we hit the same cache.
+ bic r2, pc, #0x1f
+ add r3, r2, #0x10000 @ 64 kb is quite enough...
+1: ldr r0, [r2], #32
+ teq r2, r3
+ bne 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches
+
+ @ disabling MMU and caches
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ bic r0, r0, #0x05 @ clear DC, MMU
+ bic r0, r0, #0x1000 @ clear Icache
+ mcr p15, 0, r0, c1, c0, 0
+
+#ifdef CONFIG_ARCH_LUBBOCK
+ mov r7, #MACH_TYPE_LUBBOCK
+#endif
+
+#ifdef CONFIG_ARCH_COTULLA_IDP
+ mov r7, #MACH_TYPE_COTULLA_IDP
+#endif
+
+#ifdef CONFIG_MACH_GTWX5715
+ mov r7, #(MACH_TYPE_GTWX5715 & 0xff)
+ orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
+#endif
+
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
new file mode 100644
index 0000000..c0e7aff
--- /dev/null
+++ b/arch/arm/boot/compressed/head.S
@@ -0,0 +1,786 @@
+/*
+ * linux/arch/arm/boot/compressed/head.S
+ *
+ * Copyright (C) 1996-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+
+/*
+ * Debugging stuff
+ *
+ * Note that these macros must not contain any code which is not
+ * 100% relocatable. Any attempt to do so will result in a crash.
+ * Please select one of the following when turning on debugging.
+ */
+#ifdef DEBUG
+#if defined(CONFIG_DEBUG_DC21285_PORT)
+ .macro loadsp, rb
+ mov \rb, #0x42000000
+ .endm
+ .macro writeb, rb
+ str \rb, [r3, #0x160]
+ .endm
+#elif defined(CONFIG_DEBUG_ICEDCC)
+ .macro loadsp, rb
+ .endm
+ .macro writeb, rb
+ mcr p14, 0, \rb, c0, c1, 0
+ .endm
+#elif defined(CONFIG_FOOTBRIDGE)
+ .macro loadsp, rb
+ mov \rb, #0x7c000000
+ .endm
+ .macro writeb, rb
+ strb \rb, [r3, #0x3f8]
+ .endm
+#elif defined(CONFIG_ARCH_RPC)
+ .macro loadsp, rb
+ mov \rb, #0x03000000
+ orr \rb, \rb, #0x00010000
+ .endm
+ .macro writeb, rb
+ strb \rb, [r3, #0x3f8 << 2]
+ .endm
+#elif defined(CONFIG_ARCH_INTEGRATOR)
+ .macro loadsp, rb
+ mov \rb, #0x16000000
+ .endm
+ .macro writeb, rb
+ strb \rb, [r3, #0]
+ .endm
+#elif defined(CONFIG_ARCH_PXA) /* Xscale-type */
+ .macro loadsp, rb
+ mov \rb, #0x40000000
+ orr \rb, \rb, #0x00100000
+ .endm
+ .macro writeb, rb
+ strb \rb, [r3, #0]
+ .endm
+#elif defined(CONFIG_ARCH_SA1100)
+ .macro loadsp, rb
+ mov \rb, #0x80000000 @ physical base address
+# if defined(CONFIG_DEBUG_LL_SER3)
+ add \rb, \rb, #0x00050000 @ Ser3
+# else
+ add \rb, \rb, #0x00010000 @ Ser1
+# endif
+ .endm
+ .macro writeb, rb
+ str \rb, [r3, #0x14] @ UTDR
+ .endm
+#elif defined(CONFIG_ARCH_IXP4XX)
+ .macro loadsp, rb
+ mov \rb, #0xc8000000
+ .endm
+ .macro writeb, rb
+ str \rb, [r3, #0]
+#elif defined(CONFIG_ARCH_IXP2000)
+ .macro loadsp, rb
+ mov \rb, #0xc0000000
+ orr \rb, \rb, #0x00030000
+ .endm
+ .macro writeb, rb
+ str \rb, [r3, #0]
+ .endm
+#elif defined(CONFIG_ARCH_LH7A40X)
+ .macro loadsp, rb
+ ldr \rb, =0x80000700 @ UART2 UARTBASE
+ .endm
+ .macro writeb, rb
+ strb \rb, [r3, #0]
+ .endm
+#elif defined(CONFIG_ARCH_OMAP)
+ .macro loadsp, rb
+ mov \rb, #0xff000000 @ physical base address
+ add \rb, \rb, #0x00fb0000
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+ add \rb, \rb, #0x00000800
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ add \rb, \rb, #0x00009000
+#endif
+ .endm
+ .macro writeb, rb
+ strb \rb, [r3]
+ .endm
+#elif defined(CONFIG_ARCH_IOP331)
+ .macro loadsp, rb
+ mov \rb, #0xff000000
+ orr \rb, \rb, #0x00ff0000
+ orr \rb, \rb, #0x0000f700 @ location of the UART
+ .endm
+ .macro writeb, rb
+ str \rb, [r3, #0]
+ .endm
+#elif defined(CONFIG_ARCH_S3C2410)
+ .macro loadsp, rb
+ mov \rb, #0x50000000
+ add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
+ .endm
+ .macro writeb, rb
+ strb \rb, [r3, #0x20]
+ .endm
+#else
+#error no serial architecture defined
+#endif
+#endif
+
+ .macro kputc,val
+ mov r0, \val
+ bl putc
+ .endm
+
+ .macro kphex,val,len
+ mov r0, \val
+ mov r1, #\len
+ bl phex
+ .endm
+
+ .macro debug_reloc_start
+#ifdef DEBUG
+ kputc #'\n'
+ kphex r6, 8 /* processor id */
+ kputc #':'
+ kphex r7, 8 /* architecture id */
+ kputc #':'
+ mrc p15, 0, r0, c1, c0
+ kphex r0, 8 /* control reg */
+ kputc #'\n'
+ kphex r5, 8 /* decompressed kernel start */
+ kputc #'-'
+ kphex r8, 8 /* decompressed kernel end */
+ kputc #'>'
+ kphex r4, 8 /* kernel execution address */
+ kputc #'\n'
+#endif
+ .endm
+
+ .macro debug_reloc_end
+#ifdef DEBUG
+ kphex r5, 8 /* end of kernel */
+ kputc #'\n'
+ mov r0, r4
+ bl memdump /* dump 256 bytes at start of kernel */
+#endif
+ .endm
+
+ .section ".start", #alloc, #execinstr
+/*
+ * sort out different calling conventions
+ */
+ .align
+start:
+ .type start,#function
+ .rept 8
+ mov r0, r0
+ .endr
+
+ b 1f
+ .word 0x016f2818 @ Magic numbers to help the loader
+ .word start @ absolute load/run zImage address
+ .word _edata @ zImage end address
+1: mov r7, r1 @ save architecture ID
+ mov r8, #0 @ save r0
+
+#ifndef __ARM_ARCH_2__
+ /*
+ * Booting from Angel - need to enter SVC mode and disable
+ * FIQs/IRQs (numeric definitions from angel arm.h source).
+ * We only do this if we were in user mode on entry.
+ */
+ mrs r2, cpsr @ get current mode
+ tst r2, #3 @ not user?
+ bne not_angel
+ mov r0, #0x17 @ angel_SWIreason_EnterSVC
+ swi 0x123456 @ angel_SWI_ARM
+not_angel:
+ mrs r2, cpsr @ turn off interrupts to
+ orr r2, r2, #0xc0 @ prevent angel from running
+ msr cpsr_c, r2
+#else
+ teqp pc, #0x0c000003 @ turn off interrupts
+#endif
+
+ /*
+ * Note that some cache flushing and other stuff may
+ * be needed here - is there an Angel SWI call for this?
+ */
+
+ /*
+ * some architecture specific code can be inserted
+ * by the linker here, but it should preserve r7 and r8.
+ */
+
+ .text
+ adr r0, LC0
+ ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ subs r0, r0, r1 @ calculate the delta offset
+
+ @ if delta is zero, we are
+ beq not_relocated @ running at the address we
+ @ were linked at.
+
+ /*
+ * We're running at a different address. We need to fix
+ * up various pointers:
+ * r5 - zImage base address
+ * r6 - GOT start
+ * ip - GOT end
+ */
+ add r5, r5, r0
+ add r6, r6, r0
+ add ip, ip, r0
+
+#ifndef CONFIG_ZBOOT_ROM
+ /*
+ * If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
+ * we need to fix up pointers into the BSS region.
+ * r2 - BSS start
+ * r3 - BSS end
+ * sp - stack pointer
+ */
+ add r2, r2, r0
+ add r3, r3, r0
+ add sp, sp, r0
+
+ /*
+ * Relocate all entries in the GOT table.
+ */
+1: ldr r1, [r6, #0] @ relocate entries in the GOT
+ add r1, r1, r0 @ table. This fixes up the
+ str r1, [r6], #4 @ C references.
+ cmp r6, ip
+ blo 1b
+#else
+
+ /*
+ * Relocate entries in the GOT table. We only relocate
+ * the entries that are outside the (relocated) BSS region.
+ */
+1: ldr r1, [r6, #0] @ relocate entries in the GOT
+ cmp r1, r2 @ entry < bss_start ||
+ cmphs r3, r1 @ _end < entry
+ addlo r1, r1, r0 @ table. This fixes up the
+ str r1, [r6], #4 @ C references.
+ cmp r6, ip
+ blo 1b
+#endif
+
+not_relocated: mov r0, #0
+1: str r0, [r2], #4 @ clear bss
+ str r0, [r2], #4
+ str r0, [r2], #4
+ str r0, [r2], #4
+ cmp r2, r3
+ blo 1b
+
+ /*
+ * The C runtime environment should now be setup
+ * sufficiently. Turn the cache on, set up some
+ * pointers, and start decompressing.
+ */
+ bl cache_on
+
+ mov r1, sp @ malloc space above stack
+ add r2, sp, #0x10000 @ 64k max
+
+/*
+ * Check to see if we will overwrite ourselves.
+ * r4 = final kernel address
+ * r5 = start of this image
+ * r2 = end of malloc space (and therefore this image)
+ * We basically want:
+ * r4 >= r2 -> OK
+ * r4 + image length <= r5 -> OK
+ */
+ cmp r4, r2
+ bhs wont_overwrite
+ add r0, r4, #4096*1024 @ 4MB largest kernel size
+ cmp r0, r5
+ bls wont_overwrite
+
+ mov r5, r2 @ decompress after malloc space
+ mov r0, r5
+ mov r3, r7
+ bl decompress_kernel
+
+ add r0, r0, #127
+ bic r0, r0, #127 @ align the kernel length
+/*
+ * r0 = decompressed kernel length
+ * r1-r3 = unused
+ * r4 = kernel execution address
+ * r5 = decompressed kernel start
+ * r6 = processor ID
+ * r7 = architecture ID
+ * r8-r14 = unused
+ */
+ add r1, r5, r0 @ end of decompressed kernel
+ adr r2, reloc_start
+ ldr r3, LC1
+ add r3, r2, r3
+1: ldmia r2!, {r8 - r13} @ copy relocation code
+ stmia r1!, {r8 - r13}
+ ldmia r2!, {r8 - r13}
+ stmia r1!, {r8 - r13}
+ cmp r2, r3
+ blo 1b
+
+ bl cache_clean_flush
+ add pc, r5, r0 @ call relocation code
+
+/*
+ * We're not in danger of overwriting ourselves. Do this the simple way.
+ *
+ * r4 = kernel execution address
+ * r7 = architecture ID
+ */
+wont_overwrite: mov r0, r4
+ mov r3, r7
+ bl decompress_kernel
+ b call_kernel
+
+ .type LC0, #object
+LC0: .word LC0 @ r1
+ .word __bss_start @ r2
+ .word _end @ r3
+ .word zreladdr @ r4
+ .word _start @ r5
+ .word _got_start @ r6
+ .word _got_end @ ip
+ .word user_stack+4096 @ sp
+LC1: .word reloc_end - reloc_start
+ .size LC0, . - LC0
+
+#ifdef CONFIG_ARCH_RPC
+ .globl params
+params: ldr r0, =params_phys
+ mov pc, lr
+ .ltorg
+ .align
+#endif
+
+/*
+ * Turn on the cache. We need to setup some page tables so that we
+ * can have both the I and D caches on.
+ *
+ * We place the page tables 16k down from the kernel execution address,
+ * and we hope that nothing else is using it. If we're using it, we
+ * will go pop!
+ *
+ * On entry,
+ * r4 = kernel execution address
+ * r6 = processor ID
+ * r7 = architecture number
+ * r8 = run-time address of "start"
+ * On exit,
+ * r1, r2, r3, r8, r9, r12 corrupted
+ * This routine must preserve:
+ * r4, r5, r6, r7
+ */
+ .align 5
+cache_on: mov r3, #8 @ cache_on function
+ b call_cache_fn
+
+__setup_mmu: sub r3, r4, #16384 @ Page directory size
+ bic r3, r3, #0xff @ Align the pointer
+ bic r3, r3, #0x3f00
+/*
+ * Initialise the page tables, turning on the cacheable and bufferable
+ * bits for the RAM area only.
+ */
+ mov r0, r3
+ mov r8, r0, lsr #18
+ mov r8, r8, lsl #18 @ start of RAM
+ add r9, r8, #0x10000000 @ a reasonable RAM size
+ mov r1, #0x12
+ orr r1, r1, #3 << 10
+ add r2, r3, #16384
+1: cmp r1, r8 @ if virt > start of RAM
+ orrhs r1, r1, #0x0c @ set cacheable, bufferable
+ cmp r1, r9 @ if virt > end of RAM
+ bichs r1, r1, #0x0c @ clear cacheable, bufferable
+ str r1, [r0], #4 @ 1:1 mapping
+ add r1, r1, #1048576
+ teq r0, r2
+ bne 1b
+/*
+ * If ever we are running from Flash, then we surely want the cache
+ * to be enabled also for our execution instance... We map 2MB of it
+ * so there is no map overlap problem for up to 1 MB compressed kernel.
+ * If the execution is in RAM then we would only be duplicating the above.
+ */
+ mov r1, #0x1e
+ orr r1, r1, #3 << 10
+ mov r2, pc, lsr #20
+ orr r1, r1, r2, lsl #20
+ add r0, r3, r2, lsl #2
+ str r1, [r0], #4
+ add r1, r1, #1048576
+ str r1, [r0]
+ mov pc, lr
+
+__armv4_cache_on:
+ mov r12, lr
+ bl __setup_mmu
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
+ orr r0, r0, #0x0030
+ bl __common_cache_on
+ mov r0, #0
+ mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
+ mov pc, r12
+
+__arm6_cache_on:
+ mov r12, lr
+ bl __setup_mmu
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
+ mov r0, #0x30
+ bl __common_cache_on
+ mov r0, #0
+ mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
+ mov pc, r12
+
+__common_cache_on:
+#ifndef DEBUG
+ orr r0, r0, #0x000d @ Write buffer, mmu
+#endif
+ mov r1, #-1
+ mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, r1, c3, c0, 0 @ load domain access control
+ mcr p15, 0, r0, c1, c0, 0 @ load control register
+ mov pc, lr
+
+/*
+ * All code following this line is relocatable. It is relocated by
+ * the above code to the end of the decompressed kernel image and
+ * executed there. During this time, we have no stacks.
+ *
+ * r0 = decompressed kernel length
+ * r1-r3 = unused
+ * r4 = kernel execution address
+ * r5 = decompressed kernel start
+ * r6 = processor ID
+ * r7 = architecture ID
+ * r8-r14 = unused
+ */
+ .align 5
+reloc_start: add r8, r5, r0
+ debug_reloc_start
+ mov r1, r4
+1:
+ .rept 4
+ ldmia r5!, {r0, r2, r3, r9 - r13} @ relocate kernel
+ stmia r1!, {r0, r2, r3, r9 - r13}
+ .endr
+
+ cmp r5, r8
+ blo 1b
+ debug_reloc_end
+
+call_kernel: bl cache_clean_flush
+ bl cache_off
+ mov r0, #0
+ mov r1, r7 @ restore architecture number
+ mov pc, r4 @ call kernel
+
+/*
+ * Here follow the relocatable cache support functions for the
+ * various processors. This is a generic hook for locating an
+ * entry and jumping to an instruction at the specified offset
+ * from the start of the block. Please note this is all position
+ * independent code.
+ *
+ * r1 = corrupted
+ * r2 = corrupted
+ * r3 = block offset
+ * r6 = corrupted
+ * r12 = corrupted
+ */
+
+call_cache_fn: adr r12, proc_types
+ mrc p15, 0, r6, c0, c0 @ get processor ID
+1: ldr r1, [r12, #0] @ get value
+ ldr r2, [r12, #4] @ get mask
+ eor r1, r1, r6 @ (real ^ match)
+ tst r1, r2 @ & mask
+ addeq pc, r12, r3 @ call cache function
+ add r12, r12, #4*5
+ b 1b
+
+/*
+ * Table for cache operations. This is basically:
+ * - CPU ID match
+ * - CPU ID mask
+ * - 'cache on' method instruction
+ * - 'cache off' method instruction
+ * - 'cache flush' method instruction
+ *
+ * We match an entry using: ((real_id ^ match) & mask) == 0
+ *
+ * Writethrough caches generally only need 'on' and 'off'
+ * methods. Writeback caches _must_ have the flush method
+ * defined.
+ */
+ .type proc_types,#object
+proc_types:
+ .word 0x41560600 @ ARM6/610
+ .word 0xffffffe0
+ b __arm6_cache_off @ works, but slow
+ b __arm6_cache_off
+ mov pc, lr
+@ b __arm6_cache_on @ untested
+@ b __arm6_cache_off
+@ b __armv3_cache_flush
+
+ .word 0x00000000 @ old ARM ID
+ .word 0x0000f000
+ mov pc, lr
+ mov pc, lr
+ mov pc, lr
+
+ .word 0x41007000 @ ARM7/710
+ .word 0xfff8fe00
+ b __arm7_cache_off
+ b __arm7_cache_off
+ mov pc, lr
+
+ .word 0x41807200 @ ARM720T (writethrough)
+ .word 0xffffff00
+ b __armv4_cache_on
+ b __armv4_cache_off
+ mov pc, lr
+
+ .word 0x00007000 @ ARM7 IDs
+ .word 0x0000f000
+ mov pc, lr
+ mov pc, lr
+ mov pc, lr
+
+ @ Everything from here on will be the new ID system.
+
+ .word 0x4401a100 @ sa110 / sa1100
+ .word 0xffffffe0
+ b __armv4_cache_on
+ b __armv4_cache_off
+ b __armv4_cache_flush
+
+ .word 0x6901b110 @ sa1110
+ .word 0xfffffff0
+ b __armv4_cache_on
+ b __armv4_cache_off
+ b __armv4_cache_flush
+
+ @ These match on the architecture ID
+
+ .word 0x00020000 @ ARMv4T
+ .word 0x000f0000
+ b __armv4_cache_on
+ b __armv4_cache_off
+ b __armv4_cache_flush
+
+ .word 0x00050000 @ ARMv5TE
+ .word 0x000f0000
+ b __armv4_cache_on
+ b __armv4_cache_off
+ b __armv4_cache_flush
+
+ .word 0x00060000 @ ARMv5TEJ
+ .word 0x000f0000
+ b __armv4_cache_on
+ b __armv4_cache_off
+ b __armv4_cache_flush
+
+ .word 0x00070000 @ ARMv6
+ .word 0x000f0000
+ b __armv4_cache_on
+ b __armv4_cache_off
+ b __armv6_cache_flush
+
+ .word 0 @ unrecognised type
+ .word 0
+ mov pc, lr
+ mov pc, lr
+ mov pc, lr
+
+ .size proc_types, . - proc_types
+
+/*
+ * Turn off the Cache and MMU. ARMv3 does not support
+ * reading the control register, but ARMv4 does.
+ *
+ * On entry, r6 = processor ID
+ * On exit, r0, r1, r2, r3, r12 corrupted
+ * This routine must preserve: r4, r6, r7
+ */
+ .align 5
+cache_off: mov r3, #12 @ cache_off function
+ b call_cache_fn
+
+__armv4_cache_off:
+ mrc p15, 0, r0, c1, c0
+ bic r0, r0, #0x000d
+ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
+ mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
+ mov pc, lr
+
+__arm6_cache_off:
+ mov r0, #0x00000030 @ ARM6 control reg.
+ b __armv3_cache_off
+
+__arm7_cache_off:
+ mov r0, #0x00000070 @ ARM7 control reg.
+ b __armv3_cache_off
+
+__armv3_cache_off:
+ mcr p15, 0, r0, c1, c0, 0 @ turn MMU and cache off
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
+ mov pc, lr
+
+/*
+ * Clean and flush the cache to maintain consistency.
+ *
+ * On entry,
+ * r6 = processor ID
+ * On exit,
+ * r1, r2, r3, r11, r12 corrupted
+ * This routine must preserve:
+ * r0, r4, r5, r6, r7
+ */
+ .align 5
+cache_clean_flush:
+ mov r3, #16
+ b call_cache_fn
+
+__armv6_cache_flush:
+ mov r1, #0
+ mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
+ mcr p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+__armv4_cache_flush:
+ mov r2, #64*1024 @ default: 32K dcache size (*2)
+ mov r11, #32 @ default: 32 byte line size
+ mrc p15, 0, r3, c0, c0, 1 @ read cache type
+ teq r3, r6 @ cache ID register present?
+ beq no_cache_id
+ mov r1, r3, lsr #18
+ and r1, r1, #7
+ mov r2, #1024
+ mov r2, r2, lsl r1 @ base dcache size *2
+ tst r3, #1 << 14 @ test M bit
+ addne r2, r2, r2, lsr #1 @ +1/2 size if M == 1
+ mov r3, r3, lsr #12
+ and r3, r3, #3
+ mov r11, #8
+ mov r11, r11, lsl r3 @ cache line size in bytes
+no_cache_id:
+ bic r1, pc, #63 @ align to longest cache line
+ add r2, r1, r2
+1: ldr r3, [r1], r11 @ s/w flush D cache
+ teq r1, r2
+ bne 1b
+
+ mcr p15, 0, r1, c7, c5, 0 @ flush I cache
+ mcr p15, 0, r1, c7, c6, 0 @ flush D cache
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+__armv3_cache_flush:
+ mov r1, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
+ mov pc, lr
+
+/*
+ * Various debugging routines for printing hex characters and
+ * memory, which again must be relocatable.
+ */
+#ifdef DEBUG
+ .type phexbuf,#object
+phexbuf: .space 12
+ .size phexbuf, . - phexbuf
+
+phex: adr r3, phexbuf
+ mov r2, #0
+ strb r2, [r3, r1]
+1: subs r1, r1, #1
+ movmi r0, r3
+ bmi puts
+ and r2, r0, #15
+ mov r0, r0, lsr #4
+ cmp r2, #10
+ addge r2, r2, #7
+ add r2, r2, #'0'
+ strb r2, [r3, r1]
+ b 1b
+
+puts: loadsp r3
+1: ldrb r2, [r0], #1
+ teq r2, #0
+ moveq pc, lr
+2: writeb r2
+ mov r1, #0x00020000
+3: subs r1, r1, #1
+ bne 3b
+ teq r2, #'\n'
+ moveq r2, #'\r'
+ beq 2b
+ teq r0, #0
+ bne 1b
+ mov pc, lr
+putc:
+ mov r2, r0
+ mov r0, #0
+ loadsp r3
+ b 2b
+
+memdump: mov r12, r0
+ mov r10, lr
+ mov r11, #0
+2: mov r0, r11, lsl #2
+ add r0, r0, r12
+ mov r1, #8
+ bl phex
+ mov r0, #':'
+ bl putc
+1: mov r0, #' '
+ bl putc
+ ldr r0, [r12, r11, lsl #2]
+ mov r1, #8
+ bl phex
+ and r0, r11, #7
+ teq r0, #3
+ moveq r0, #' '
+ bleq putc
+ and r0, r11, #7
+ add r11, r11, #1
+ teq r0, #7
+ bne 1b
+ mov r0, #'\n'
+ bl putc
+ cmp r11, #64
+ blt 2b
+ mov pc, r10
+#endif
+
+reloc_end:
+
+ .align
+ .section ".stack", "w"
+user_stack: .space 4096
diff --git a/arch/arm/boot/compressed/ice-dcc.S b/arch/arm/boot/compressed/ice-dcc.S
new file mode 100644
index 0000000..104377a
--- /dev/null
+++ b/arch/arm/boot/compressed/ice-dcc.S
@@ -0,0 +1,17 @@
+
+
+ .text
+
+ .global icedcc_putc
+
+icedcc_putc:
+ mov r2, #0x4000000
+1:
+ subs r2, r2, #1
+ movlt pc, r14
+ mrc p14, 0, r1, c0, c0, 0
+ tst r1, #2
+ bne 1b
+
+ mcr p14, 0, r0, c1, c0, 0
+ mov pc, r14
diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
new file mode 100644
index 0000000..d7bbd9d
--- /dev/null
+++ b/arch/arm/boot/compressed/ll_char_wr.S
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/lib/ll_char_wr.S
+ *
+ * Copyright (C) 1995, 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
+ *
+ * 10-04-96 RMK Various cleanups & reduced register usage.
+ * 08-04-98 RMK Shifts re-ordered
+ */
+
+@ Regs: [] = corruptible
+@ {} = used
+@ () = do not use
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+ .text
+
+LC0: .word LC0
+ .word bytes_per_char_h
+ .word video_size_row
+ .word acorndata_8x8
+ .word con_charconvtable
+
+/*
+ * r0 = ptr
+ * r1 = char
+ * r2 = white
+ */
+ENTRY(ll_write_char)
+ stmfd sp!, {r4 - r7, lr}
+@
+@ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc)
+@
+ /*
+ * calculate offset into character table
+ */
+ mov r1, r1, lsl #3
+ /*
+ * calculate offset required for each row.
+ */
+ adr ip, LC0
+ ldmia ip, {r3, r4, r5, r6, lr}
+ sub ip, ip, r3
+ add r6, r6, ip
+ add lr, lr, ip
+ ldr r4, [r4, ip]
+ ldr r5, [r5, ip]
+ /*
+ * Go to resolution-dependent routine...
+ */
+ cmp r4, #4
+ blt Lrow1bpp
+ add r0, r0, r5, lsl #3 @ Move to bottom of character
+ orr r1, r1, #7
+ ldrb r7, [r6, r1]
+ teq r4, #8
+ beq Lrow8bpplp
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
+@
+Lrow4bpplp:
+ ldr r7, [lr, r7, lsl #2]
+ mul r7, r2, r7
+ sub r1, r1, #1 @ avoid using r7 directly after
+ str r7, [r0, -r5]!
+ ldrb r7, [r6, r1]
+ ldr r7, [lr, r7, lsl #2]
+ mul r7, r2, r7
+ tst r1, #7 @ avoid using r7 directly after
+ str r7, [r0, -r5]!
+ subne r1, r1, #1
+ ldrneb r7, [r6, r1]
+ bne Lrow4bpplp
+ LOADREGS(fd, sp!, {r4 - r7, pc})
+
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
+@
+Lrow8bpplp:
+ mov ip, r7, lsr #4
+ ldr ip, [lr, ip, lsl #2]
+ mul r4, r2, ip
+ and ip, r7, #15 @ avoid r4
+ ldr ip, [lr, ip, lsl #2] @ avoid r4
+ mul ip, r2, ip @ avoid r4
+ sub r1, r1, #1 @ avoid ip
+ sub r0, r0, r5 @ avoid ip
+ stmia r0, {r4, ip}
+ ldrb r7, [r6, r1]
+ mov ip, r7, lsr #4
+ ldr ip, [lr, ip, lsl #2]
+ mul r4, r2, ip
+ and ip, r7, #15 @ avoid r4
+ ldr ip, [lr, ip, lsl #2] @ avoid r4
+ mul ip, r2, ip @ avoid r4
+ tst r1, #7 @ avoid ip
+ sub r0, r0, r5 @ avoid ip
+ stmia r0, {r4, ip}
+ subne r1, r1, #1
+ ldrneb r7, [r6, r1]
+ bne Lrow8bpplp
+ LOADREGS(fd, sp!, {r4 - r7, pc})
+
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
+@
+Lrow1bpp:
+ add r6, r6, r1
+ ldmia r6, {r4, r7}
+ strb r4, [r0], r5
+ mov r4, r4, lsr #8
+ strb r4, [r0], r5
+ mov r4, r4, lsr #8
+ strb r4, [r0], r5
+ mov r4, r4, lsr #8
+ strb r4, [r0], r5
+ strb r7, [r0], r5
+ mov r7, r7, lsr #8
+ strb r7, [r0], r5
+ mov r7, r7, lsr #8
+ strb r7, [r0], r5
+ mov r7, r7, lsr #8
+ strb r7, [r0], r5
+ LOADREGS(fd, sp!, {r4 - r7, pc})
+
+ .bss
+ENTRY(con_charconvtable)
+ .space 1024
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
new file mode 100644
index 0000000..23434b5
--- /dev/null
+++ b/arch/arm/boot/compressed/misc.c
@@ -0,0 +1,329 @@
+/*
+ * misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Modified for ARM Linux by Russell King
+ *
+ * Nicolas Pitre <nico@visuaide.com> 1999/04/14 :
+ * For this code to run directly from Flash, all constant variables must
+ * be marked with 'const' and all other variables initialized at run-time
+ * only. This way all non constant variables will end up in the bss segment,
+ * which should point to addresses in RAM and cleared to 0 on start.
+ * This allows for a much quicker boot time.
+ */
+
+unsigned int __machine_arch_type;
+
+#include <linux/string.h>
+
+#include <asm/arch/uncompress.h>
+
+#ifdef STANDALONE_DEBUG
+#define putstr printf
+#endif
+
+#ifdef CONFIG_DEBUG_ICEDCC
+#define putstr icedcc_putstr
+#define putc icedcc_putc
+
+extern void idedcc_putc(int ch);
+
+static void
+icedcc_putstr(const char *ptr)
+{
+ for (; *ptr != '\0'; ptr++) {
+ icedcc_putc(*ptr);
+ }
+}
+
+#endif
+
+#define __ptr_t void *
+
+/*
+ * Optimised C version of memzero for the ARM.
+ */
+void __memzero (__ptr_t s, size_t n)
+{
+ union { void *vp; unsigned long *ulp; unsigned char *ucp; } u;
+ int i;
+
+ u.vp = s;
+
+ for (i = n >> 5; i > 0; i--) {
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ }
+
+ if (n & 1 << 4) {
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ }
+
+ if (n & 1 << 3) {
+ *u.ulp++ = 0;
+ *u.ulp++ = 0;
+ }
+
+ if (n & 1 << 2)
+ *u.ulp++ = 0;
+
+ if (n & 1 << 1) {
+ *u.ucp++ = 0;
+ *u.ucp++ = 0;
+ }
+
+ if (n & 1)
+ *u.ucp++ = 0;
+}
+
+static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
+ size_t __n)
+{
+ int i = 0;
+ unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+ for (i = __n >> 3; i > 0; i--) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 2) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 1) {
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1)
+ *d++ = *s++;
+
+ return __dest;
+}
+
+/*
+ * gzip delarations
+ */
+#define OF(args) args
+#define STATIC static
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
+ /* and a power of two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* Sliding window buffer */
+
+static unsigned insize; /* valid bytes in inbuf */
+static unsigned inptr; /* index of next byte to be processed in inbuf */
+static unsigned outcnt; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+extern char input_data[];
+extern char input_data_end[];
+
+static uch *output_data;
+static ulg output_ptr;
+static ulg bytes_out;
+
+static void *malloc(int size);
+static void free(void *where);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+static void putstr(const char *);
+
+extern int end;
+static ulg free_mem_ptr;
+static ulg free_mem_ptr_end;
+
+#define HEAP_SIZE 0x2000
+
+#include "../../../../lib/inflate.c"
+
+#ifndef STANDALONE_DEBUG
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size <0) error("Malloc error");
+ if (free_mem_ptr <= 0) error("Memory error");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *)free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_ptr_end)
+ error("Out of memory");
+ return p;
+}
+
+static void free(void *where)
+{ /* gzip_mark & gzip_release do the free */
+}
+
+static void gzip_mark(void **ptr)
+{
+ arch_decomp_wdog();
+ *ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+ arch_decomp_wdog();
+ free_mem_ptr = (long) *ptr;
+}
+#else
+static void gzip_mark(void **ptr)
+{
+}
+
+static void gzip_release(void **ptr)
+{
+}
+#endif
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+int fill_inbuf(void)
+{
+ if (insize != 0)
+ error("ran out of input data");
+
+ inbuf = input_data;
+ insize = &input_data_end[0] - &input_data[0];
+
+ inptr = 1;
+ return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+void flush_window(void)
+{
+ ulg c = crc;
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+ putstr(".");
+}
+
+static void error(char *x)
+{
+ putstr("\n\n");
+ putstr(x);
+ putstr("\n\n -- System halted");
+
+ while(1); /* Halt */
+}
+
+#ifndef STANDALONE_DEBUG
+
+ulg
+decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
+ int arch_id)
+{
+ output_data = (uch *)output_start; /* Points to kernel start */
+ free_mem_ptr = free_mem_ptr_p;
+ free_mem_ptr_end = free_mem_ptr_end_p;
+ __machine_arch_type = arch_id;
+
+ arch_decomp_setup();
+
+ makecrc();
+ putstr("Uncompressing Linux...");
+ gunzip();
+ putstr(" done, booting the kernel.\n");
+ return output_ptr;
+}
+#else
+
+char output_buffer[1500*1024];
+
+int main()
+{
+ output_data = output_buffer;
+
+ makecrc();
+ putstr("Uncompressing Linux...");
+ gunzip();
+ putstr("done.\n");
+ return 0;
+}
+#endif
+
diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c
new file mode 100644
index 0000000..7f6f5db
--- /dev/null
+++ b/arch/arm/boot/compressed/ofw-shark.c
@@ -0,0 +1,260 @@
+/*
+ * linux/arch/arm/boot/compressed/ofw-shark.c
+ *
+ * by Alexander Schulz
+ *
+ * This file is used to get some basic information
+ * about the memory layout of the shark we are running
+ * on. Memory is usually divided in blocks a 8 MB.
+ * And bootargs are copied from OpenFirmware.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+
+asmlinkage void
+create_params (unsigned long *buffer)
+{
+ /* Is there a better address? Also change in mach-shark/core.c */
+ struct tag *tag = (struct tag *) 0x08003000;
+ int j,i,m,k,nr_banks,size;
+ unsigned char *c;
+
+ k = 0;
+
+ /* Head of the taglist */
+ tag->hdr.tag = ATAG_CORE;
+ tag->hdr.size = tag_size(tag_core);
+ tag->u.core.flags = 1;
+ tag->u.core.pagesize = PAGE_SIZE;
+ tag->u.core.rootdev = 0;
+
+ /* Build up one tagged block for each memory region */
+ size=0;
+ nr_banks=(unsigned int) buffer[0];
+ for (j=0;j<nr_banks;j++){
+ /* search the lowest address and put it into the next entry */
+ /* not a fast sort algorithm, but there are at most 8 entries */
+ /* and this is used only once anyway */
+ m=0xffffffff;
+ for (i=0;i<(unsigned int) buffer[0];i++){
+ if (buffer[2*i+1]<m) {
+ m=buffer[2*i+1];
+ k=i;
+ }
+ }
+
+ tag = tag_next(tag);
+ tag->hdr.tag = ATAG_MEM;
+ tag->hdr.size = tag_size(tag_mem32);
+ tag->u.mem.size = buffer[2*k+2];
+ tag->u.mem.start = buffer[2*k+1];
+
+ size += buffer[2*k+2];
+
+ buffer[2*k+1]=0xffffffff; /* mark as copied */
+ }
+
+ /* The command line */
+ tag = tag_next(tag);
+ tag->hdr.tag = ATAG_CMDLINE;
+
+ c=(unsigned char *)(&buffer[34]);
+ j=0;
+ while (*c) tag->u.cmdline.cmdline[j++]=*c++;
+
+ tag->u.cmdline.cmdline[j]=0;
+ tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
+
+ /* Hardware revision */
+ tag = tag_next(tag);
+ tag->hdr.tag = ATAG_REVISION;
+ tag->hdr.size = tag_size(tag_revision);
+ tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
+
+ /* End of the taglist */
+ tag = tag_next(tag);
+ tag->hdr.tag = 0;
+ tag->hdr.size = 0;
+}
+
+
+typedef int (*ofw_handle_t)(void *);
+
+/* Everything below is called with a wrong MMU setting.
+ * This means: no string constants, no initialization of
+ * arrays, no global variables! This is ugly but I didn't
+ * want to write this in assembler :-)
+ */
+
+int
+of_decode_int(const unsigned char *p)
+{
+ unsigned int i = *p++ << 8;
+ i = (i + *p++) << 8;
+ i = (i + *p++) << 8;
+ return (i + *p);
+}
+
+int
+OF_finddevice(ofw_handle_t openfirmware, char *name)
+{
+ unsigned int args[8];
+ char service[12];
+
+ service[0]='f';
+ service[1]='i';
+ service[2]='n';
+ service[3]='d';
+ service[4]='d';
+ service[5]='e';
+ service[6]='v';
+ service[7]='i';
+ service[8]='c';
+ service[9]='e';
+ service[10]='\0';
+
+ args[0]=(unsigned int)service;
+ args[1]=1;
+ args[2]=1;
+ args[3]=(unsigned int)name;
+
+ if (openfirmware(args) == -1)
+ return -1;
+ return args[4];
+}
+
+int
+OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
+{
+ unsigned int args[8];
+ char service[12];
+
+ service[0]='g';
+ service[1]='e';
+ service[2]='t';
+ service[3]='p';
+ service[4]='r';
+ service[5]='o';
+ service[6]='p';
+ service[7]='l';
+ service[8]='e';
+ service[9]='n';
+ service[10]='\0';
+
+ args[0] = (unsigned int)service;
+ args[1] = 2;
+ args[2] = 1;
+ args[3] = (unsigned int)handle;
+ args[4] = (unsigned int)prop;
+
+ if (openfirmware(args) == -1)
+ return -1;
+ return args[5];
+}
+
+int
+OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
+{
+ unsigned int args[8];
+ char service[8];
+
+ service[0]='g';
+ service[1]='e';
+ service[2]='t';
+ service[3]='p';
+ service[4]='r';
+ service[5]='o';
+ service[6]='p';
+ service[7]='\0';
+
+ args[0] = (unsigned int)service;
+ args[1] = 4;
+ args[2] = 1;
+ args[3] = (unsigned int)handle;
+ args[4] = (unsigned int)prop;
+ args[5] = (unsigned int)buf;
+ args[6] = buflen;
+
+ if (openfirmware(args) == -1)
+ return -1;
+ return args[7];
+}
+
+asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
+{
+ int phandle,i,mem_len,buffer[32];
+ char temp[15];
+
+ temp[0]='/';
+ temp[1]='m';
+ temp[2]='e';
+ temp[3]='m';
+ temp[4]='o';
+ temp[5]='r';
+ temp[6]='y';
+ temp[7]='\0';
+
+ phandle=OF_finddevice(o,temp);
+
+ temp[0]='r';
+ temp[1]='e';
+ temp[2]='g';
+ temp[3]='\0';
+
+ mem_len = OF_getproplen(o,phandle, temp);
+ OF_getprop(o,phandle, temp, buffer, mem_len);
+ *nomr=mem_len >> 3;
+
+ for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
+
+ temp[0]='/';
+ temp[1]='c';
+ temp[2]='h';
+ temp[3]='o';
+ temp[4]='s';
+ temp[5]='e';
+ temp[6]='n';
+ temp[7]='\0';
+
+ phandle=OF_finddevice(o,temp);
+
+ temp[0]='b';
+ temp[1]='o';
+ temp[2]='o';
+ temp[3]='t';
+ temp[4]='a';
+ temp[5]='r';
+ temp[6]='g';
+ temp[7]='s';
+ temp[8]='\0';
+
+ mem_len = OF_getproplen(o,phandle, temp);
+ OF_getprop(o,phandle, temp, buffer, mem_len);
+ if (mem_len > 128) mem_len=128;
+ for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
+ pointer[i+33]=0;
+
+ temp[0]='/';
+ temp[1]='\0';
+ phandle=OF_finddevice(o,temp);
+ temp[0]='b';
+ temp[1]='a';
+ temp[2]='n';
+ temp[3]='n';
+ temp[4]='e';
+ temp[5]='r';
+ temp[6]='-';
+ temp[7]='n';
+ temp[8]='a';
+ temp[9]='m';
+ temp[10]='e';
+ temp[11]='\0';
+ mem_len = OF_getproplen(o,phandle, temp);
+ OF_getprop(o,phandle, temp, buffer, mem_len);
+ (unsigned char) pointer[32] = ((unsigned char *) buffer)[mem_len-2];
+}
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
new file mode 100644
index 0000000..54c9518
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.S
@@ -0,0 +1,6 @@
+ .section .piggydata,#alloc
+ .globl input_data
+input_data:
+ .incbin "arch/arm/boot/compressed/piggy.gz"
+ .globl input_data_end
+input_data_end:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
new file mode 100644
index 0000000..eed6161
--- /dev/null
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/boot/compressed/vmlinux.lds.in
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = TEXT_START;
+ _text = .;
+
+ .text : {
+ _start = .;
+ *(.start)
+ *(.text)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata)
+ *(.rodata.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.piggydata)
+ . = ALIGN(4);
+ }
+
+ _etext = .;
+
+ _got_start = .;
+ .got : { *(.got) }
+ _got_end = .;
+ .got.plt : { *(.got.plt) }
+ .data : { *(.data) }
+ _edata = .;
+
+ . = BSS_START;
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+
+ .stack (NOLOAD) : { *(.stack) }
+
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+}
+