diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
new file mode 100644
index 0000000..937a353
--- /dev/null
+++ b/arch/arm/boot/Makefile
@@ -0,0 +1,91 @@
+#
+# arch/arm/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995-2002 Russell King
+#
+
+MKIMAGE         := $(srctree)/scripts/mkuboot.sh
+
+ifneq ($(MACHINE),)
+include $(srctree)/$(MACHINE)/Makefile.boot
+endif
+
+# Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(TEXTADDR)
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+ZRELADDR    := $(zreladdr-y)
+PARAMS_PHYS := $(params_phys-y)
+INITRD_PHYS := $(initrd_phys-y)
+
+export ZRELADDR INITRD_PHYS PARAMS_PHYS
+
+targets := Image zImage xipImage bootpImage uImage
+
+ifeq ($(CONFIG_XIP_KERNEL),y)
+
+$(obj)/xipImage: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+
+$(obj)/Image $(obj)/zImage: FORCE
+	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
+	@echo 'Only the xipImage target is available in this case'
+	@false
+
+else
+
+$(obj)/xipImage: FORCE
+	@echo 'Kernel not configured for XIP (CONFIG_XIP_KERNEL!=y)'
+	@false
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+endif
+
+quiet_cmd_uimage = UIMAGE  $@
+      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
+		   -C none -a $(ZRELADDR) -e $(ZRELADDR) \
+		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
+
+$(obj)/uImage:	$(obj)/zImage FORCE
+	$(call if_changed,uimage)
+	@echo '  Image $@ is ready'
+
+$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
+	@:
+
+$(obj)/bootpImage: $(obj)/bootp/bootp FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+.PHONY: initrd FORCE
+initrd:
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo This machine does not support INITRD; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo You must specify INITRD; exit -1)
+
+install: $(obj)/Image
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/Image System.map "$(INSTALL_PATH)"
+
+zinstall: $(obj)/zImage
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/zImage System.map "$(INSTALL_PATH)"
+
+subdir-	    := bootp compressed
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
new file mode 100644
index 0000000..8e8879b
--- /dev/null
+++ b/arch/arm/boot/bootp/Makefile
@@ -0,0 +1,24 @@
+#
+# linux/arch/arm/boot/bootp/Makefile
+#
+
+LDFLAGS_bootp	:=-p --no-undefined -X \
+		 --defsym initrd_phys=$(INITRD_PHYS) \
+		 --defsym params_phys=$(PARAMS_PHYS) -T
+AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"
+
+targets	:= bootp init.o kernel.o initrd.o
+
+# Note that bootp.lds picks up kernel.o and initrd.o
+$(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FORCE
+	$(call if_changed,ld)
+	@:
+
+# kernel.o and initrd.o includes a binary image using
+# .incbin, a dependency which is not tracked automatically
+
+$(obj)/kernel.o: arch/arm/boot/zImage FORCE
+
+$(obj)/initrd.o: $(INITRD) FORCE
+
+.PHONY:	$(INITRD) FORCE
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
new file mode 100644
index 0000000..8e3d81c
--- /dev/null
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -0,0 +1,30 @@
+/*
+ *  linux/arch/arm/boot/bootp/bootp.lds
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+  . = 0;
+  .text : {
+   _stext = .;
+   *(.start)
+   *(.text)
+   initrd_size = initrd_end - initrd_start;
+   _etext = .;
+  }
+  
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+}
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
new file mode 100644
index 0000000..df7bc70
--- /dev/null
+++ b/arch/arm/boot/bootp/init.S
@@ -0,0 +1,86 @@
+/*
+ *  linux/arch/arm/boot/bootp/init.S
+ *
+ *  Copyright (C) 2000-2003 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  "Header" file for splitting kernel + initrd.  Note that we pass
+ *  r0 through to r3 straight through.
+ *
+ *  This demonstrates how to append code to the start of the kernel
+ *  zImage, and boot the kernel without copying it around.  This
+ *  example would be simpler; if we didn't have an object of unknown
+ *  size immediately following the kernel, we could build this into
+ *  a binary blob, and concatenate the zImage using the cat command.
+ */
+		.section .start,#alloc,#execinstr
+		.type	_start, #function
+		.globl	_start
+
+_start:		add	lr, pc, #-0x8		@ lr = current load addr
+		adr	r13, data
+		ldmia	r13!, {r4-r6}		@ r5 = dest, r6 = length
+		add	r4, r4, lr		@ r4 = initrd_start + load addr
+		bl	move			@ move the initrd
+
+/*
+ * Setup the initrd parameters to pass to the kernel.  This can only be
+ * passed in via the tagged list.
+ */
+		ldmia	r13, {r5-r9}		@ get size and addr of initrd
+						@ r5 = ATAG_CORE
+						@ r6 = ATAG_INITRD2
+						@ r7 = initrd start
+						@ r8 = initrd end
+						@ r9 = param_struct address
+
+		ldr	r10, [r9, #4]		@ get first tag
+		teq	r10, r5			@ is it ATAG_CORE?
+/*
+ * If we didn't find a valid tag list, create a dummy ATAG_CORE entry.
+ */
+		movne	r10, #0			@ terminator
+		movne	r4, #2			@ Size of this entry (2 words)
+		stmneia	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
+
+/*
+ * find the end of the tag list, and then add an INITRD tag on the end.
+ * If there is already an INITRD tag, then we ignore it; the last INITRD
+ * tag takes precidence.
+ */
+taglist:	ldr	r10, [r9, #0]		@ tag length
+		teq	r10, #0			@ last tag (zero length)?
+		addne	r9, r9, r10, lsl #2
+		bne	taglist
+
+		mov	r5, #4			@ Size of initrd tag (4 words)
+		stmia	r9, {r5, r6, r7, r8, r10}
+		b	kernel_start		@ call kernel
+
+/*
+ * Move the block of memory length r6 from address r4 to address r5
+ */
+move:		ldmia	r4!, {r7 - r10}		@ move 32-bytes at a time
+		stmia	r5!, {r7 - r10}
+		ldmia	r4!, {r7 - r10}
+		stmia	r5!, {r7 - r10}
+		subs	r6, r6, #8 * 4
+		bcs	move
+		mov	pc, lr
+
+		.size	_start, . - _start
+
+		.type	data,#object
+data:		.word	initrd_start		@ source initrd address
+		.word	initrd_phys		@ destination initrd address
+		.word	initrd_size		@ initrd size
+
+		.word	0x54410001		@ r5 = ATAG_CORE
+		.word	0x54420005		@ r6 = ATAG_INITRD2
+		.word	initrd_phys		@ r7
+		.word	initrd_size		@ r8
+		.word	params_phys		@ r9
+		.size	data, . - data
diff --git a/arch/arm/boot/bootp/initrd.S b/arch/arm/boot/bootp/initrd.S
new file mode 100644
index 0000000..d81ea18
--- /dev/null
+++ b/arch/arm/boot/bootp/initrd.S
@@ -0,0 +1,6 @@
+	.type	initrd_start,#object
+	.globl	initrd_start
+initrd_start:
+	.incbin	INITRD
+	.globl	initrd_end
+initrd_end:
diff --git a/arch/arm/boot/bootp/kernel.S b/arch/arm/boot/bootp/kernel.S
new file mode 100644
index 0000000..b87a25c
--- /dev/null
+++ b/arch/arm/boot/bootp/kernel.S
@@ -0,0 +1,6 @@
+	.globl	kernel_start
+kernel_start:
+	.incbin	"arch/arm/boot/zImage"
+	.globl	kernel_end
+kernel_end:
+	.align	2
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
new file mode 100644
index 0000000..6b505ce
--- /dev/null
+++ b/arch/arm/boot/compressed/Makefile
@@ -0,0 +1,114 @@
+#
+# linux/arch/arm/boot/compressed/Makefile
+#
+# create a compressed vmlinuz image from the original vmlinux
+#
+
+HEAD	= head.o
+OBJS	= misc.o
+FONTC	= drivers/video/console/font_acorn_8x8.c
+
+FONT = $(addprefix ../../../../drivers/video/console/, font_acorn_8x8.o)
+
+#
+# Architecture dependencies
+#
+ifeq ($(CONFIG_ARCH_ACORN),y)
+OBJS		+= ll_char_wr.o $(FONT)
+endif
+
+ifeq ($(CONFIG_ARCH_SHARK),y)
+OBJS		+= head-shark.o ofw-shark.o
+endif
+
+ifeq ($(CONFIG_ARCH_CAMELOT),y)
+OBJS		+= head-epxa10db.o
+endif
+
+ifeq ($(CONFIG_ARCH_L7200),y)
+OBJS		+= head-l7200.o
+endif
+
+ifeq ($(CONFIG_ARCH_CLPS7500),y)
+HEAD		= head-clps7500.o
+endif
+
+ifeq ($(CONFIG_ARCH_P720T),y)
+# Borrow this code from SA1100
+OBJS		+= head-sa1100.o
+endif
+
+ifeq ($(CONFIG_ARCH_SA1100),y)
+OBJS		+= head-sa1100.o
+endif
+
+ifeq ($(CONFIG_CPU_XSCALE),y)
+OBJS		+= head-xscale.o
+endif
+
+ifeq ($(CONFIG_PXA_SHARPSL),y)
+OBJS		+= head-sharpsl.o
+endif
+
+ifeq ($(CONFIG_DEBUG_ICEDCC),y)
+OBJS            += ice-dcc.o
+endif
+
+ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+OBJS		+= big-endian.o
+endif
+
+#
+# We now have a PIC decompressor implementation.  Decompressors running
+# from RAM should not define ZTEXTADDR.  Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
+# FIXME: Previous assignment to ztextaddr-y is lost here. See SHARK
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
+ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
+else
+ZTEXTADDR	:= 0
+ZBSSADDR	:= ALIGN(4)
+endif
+
+SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+
+targets       := vmlinux vmlinux.lds piggy.gz piggy.o $(FONT) \
+		 head.o misc.o $(OBJS)
+EXTRA_CFLAGS  := -fpic
+EXTRA_AFLAGS  :=
+
+# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
+# linker symbols.  We only define initrd_phys and params_phys if the
+# machine class defined the corresponding makefile variable.
+LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifneq ($(INITRD_PHYS),)
+LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
+endif
+ifneq ($(PARAMS_PHYS),)
+LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
+endif
+LDFLAGS_vmlinux += -p --no-undefined -X \
+	$(shell $(CC) $(CFLAGS) --print-libgcc-file-name) -T
+
+# Don't allow any static data in misc.o, which
+# would otherwise mess up our GOT table
+CFLAGS_misc.o := -Dstatic=
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+	 	$(addprefix $(obj)/, $(OBJS)) FORCE
+	$(call if_changed,ld)
+	@:
+
+$(obj)/piggy.gz: $(obj)/../Image FORCE
+	$(call if_changed,gzip)
+
+$(obj)/piggy.o:  $(obj)/piggy.gz FORCE
+
+CFLAGS_font_acorn_8x8.o := -Dstatic=
+
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+	@sed "$(SEDFLAGS)" < $< > $@
+
+$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c
+
diff --git a/arch/arm/boot/compressed/Makefile.debug b/arch/arm/boot/compressed/Makefile.debug
new file mode 100644
index 0000000..491a037
--- /dev/null
+++ b/arch/arm/boot/compressed/Makefile.debug
@@ -0,0 +1,23 @@
+#
+# linux/arch/arm/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+COMPRESSED_EXTRA=../../lib/ll_char_wr.o
+OBJECTS=misc-debug.o ll_char_wr.aout.o
+
+CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c
+
+test-gzip: piggy.aout.o $(OBJECTS)
+	$(CC) -o $@ $(OBJECTS) piggy.aout.o
+
+misc-debug.o: misc.c
+	$(CC) $(CFLAGS) -o $@ misc.c
+
+piggy.aout.o: piggy.o
+	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o
+
+ll_char_wr.aout.o: $(COMPRESSED_EXTRA)
+	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o
+
diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
new file mode 100644
index 0000000..25ab26f
--- /dev/null
+++ b/arch/arm/boot/compressed/big-endian.S
@@ -0,0 +1,13 @@
+/*
+ *  linux/arch/arm/boot/compressed/big-endian.S
+ *
+ *  Switch CPU into big endian mode.
+ *  Author: Nicolas Pitre
+ */
+
+	.section ".start", #alloc, #execinstr
+
+	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+	orr	r0, r0, #(1 << 7)	@ enable big endian mode
+	mcr	p15, 0, r0, c1, c0, 0	@ write control reg
+
diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
new file mode 100644
index 0000000..4a8a689
--- /dev/null
+++ b/arch/arm/boot/compressed/head-clps7500.S
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/arm/boot/compressed/head.S
+ *
+ * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
+ */
+
+#include <linux/config.h>
+
+		/* There are three different ways the kernel can be
+		   booted on a 7500 system: from Angel (loaded in RAM), from
+		   16-bit ROM or from 32-bit Flash.  Luckily, a single kernel
+		   image does for them all. */
+		/* This branch is taken if the CPU memory width matches the
+		   actual device in use.  The default at power on is 16 bits
+		   so we must be prepared for a mismatch. */
+		.section ".start", "ax"
+2:
+		b	1f
+		.word	0xffff
+		.word	0xb632		@ mov r11, #0x03200000
+		.word	0xe3a0
+		.word	0x0000		@ mov r0, #0
+		.word	0xe3a0
+		.word	0x0080		@ strb r0, [r11, #0x80]
+		.word	0xe5cb
+		.word	0xf000		@ mov pc, #0
+		.word	0xe3a0
+1:
+		adr	r1, 2b
+		teq	r1, #0
+		bne	.Langel
+		/* This is a direct-from-ROM boot.  Copy the kernel into 
+		   RAM and run it there. */
+		mov	r0, #0x30
+		mcr	p15, 0, r0, c1, c0, 0
+		mov	r0, #0x13
+		msr	cpsr_cxsf, r0
+		mov	r12, #0x03000000	@ point to LEDs
+		orr	r12, r12, #0x00020000
+		orr	r12, r12, #0xba00
+		mov	r0, #0x5500
+		str	r0, [r12]
+		mov	r0, #0x10000000
+		orr	r0, r0, #0x8000
+		mov	r4, r0
+		ldr	r2, =_end
+2:
+		ldr	r3, [r1], #4
+		str	r3, [r0], #4
+		teq	r0, r2
+		bne	2b
+		mov	r0, #0xff00
+		str	r0, [r12]
+1:	
+		mov	r12, #0x03000000	@ point to LEDs
+		orr	r12, r12, #0x00020000
+		orr	r12, r12, #0xba00
+		mov	r0, #0xfe00
+		str	r0, [r12]
+
+		adr	lr, 1f
+		mov	r0, #0
+		mov	r1, #14		/* MACH_TYPE_CLPS7500 */
+		mov	pc, lr
+.Langel:
+#ifdef CONFIG_ANGELBOOT
+		/* Call Angel to switch into SVC mode. */
+		mov	r0, #0x17
+		swi	0x123456
+#endif
+		/* Ensure all interrupts are off and MMU disabled */
+		mrs	r0, cpsr
+		orr	r0, r0, #0xc0
+		msr	cpsr_cxsf, r0
+
+		adr	lr, 1b
+		orr	lr, lr, #0x10000000
+		mov	r0, #0x30		@ MMU off
+		mcr	p15, 0, r0, c1, c0, 0
+		mov	r0, r0
+	 	mov	pc, lr
+
+		.ltorg
+
+1:
+/* And the rest */
+#include "head.S"
diff --git a/arch/arm/boot/compressed/head-epxa10db.S b/arch/arm/boot/compressed/head-epxa10db.S
new file mode 100644
index 0000000..757681f
--- /dev/null
+++ b/arch/arm/boot/compressed/head-epxa10db.S
@@ -0,0 +1,5 @@
+#include <asm/mach-types.h>
+#include <asm/arch/excalibur.h>
+
+		.section	".start", "ax"
+		mov	r7, #MACH_TYPE_CAMELOT
diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S
new file mode 100644
index 0000000..b08bd23
--- /dev/null
+++ b/arch/arm/boot/compressed/head-l7200.S
@@ -0,0 +1,30 @@
+/* 
+ * linux/arch/arm/boot/compressed/head-l7200.S
+ * 
+ * Copyright (C) 2000 Steve Hill <sjhill@cotw.com>
+ * 
+ * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This
+ * is merged with head.S by the linker.
+ */
+
+#include <linux/config.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_ARCH_L7200
+#error What am I doing here...
+#endif
+
+		.section        ".start", "ax"
+
+__L7200_start:
+		mov	r0, #0x00100000		@ FLASH address of initrd
+		mov	r2, #0xf1000000		@ RAM address of initrd
+		add	r3, r2, #0x00700000	@ Size of initrd 
+1:
+		ldmia   r0!, {r4, r5, r6, r7}
+		stmia   r2!, {r4, r5, r6, r7}
+		cmp	r2, r3
+		ble	1b
+
+		mov	r8, #0			@ Zero it out
+		mov	r7, #MACH_TYPE_L7200	@ Set architecture ID
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
new file mode 100644
index 0000000..5aefffd
--- /dev/null
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -0,0 +1,48 @@
+/* 
+ * linux/arch/arm/boot/compressed/head-sa1100.S
+ * 
+ * Copyright (C) 1999 Nicolas Pitre <nico@cam.org>
+ * 
+ * SA1100 specific tweaks.  This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+		.section        ".start", "ax"
+
+__SA1100_start:
+
+		@ Preserve r8/r7 i.e. kernel entry values
+#ifdef CONFIG_SA1100_COLLIE
+		mov	r7, #MACH_TYPE_COLLIE
+#endif
+#ifdef CONFIG_SA1100_SIMPAD
+		@ UNTIL we've something like an open bootldr
+		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
+#endif
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		ands	r0, r0, #0x0d
+		beq	99f
+
+		@ Data cache might be active.
+		@ Be sure to flush kernel binary out of the cache,
+		@ whatever state it is, before it is turned off.
+		@ This is done by fetching through currently executed
+		@ memory to be sure we hit the same cache.
+		bic	r2, pc, #0x1f
+		add	r3, r2, #0x4000		@ 16 kb is quite enough...
+1:		ldr	r0, [r2], #32
+		teq	r2, r3
+		bne	1b
+		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
+		mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
+
+		@ disabling MMU and caches
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #0x0d		@ clear WB, DC, MMU
+		bic	r0, r0, #0x1000		@ clear Icache
+		mcr	p15, 0, r0, c1, c0, 0
+99:
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
new file mode 100644
index 0000000..848f60e
--- /dev/null
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -0,0 +1,115 @@
+/* The head-file for the Shark
+ * by Alexander Schulz
+ *
+ * Does the following:
+ * - get the memory layout from firmware. This can only be done as long as the mmu
+ *   is still on.
+ * - switch the mmu off, so we have physical addresses
+ * - copy the kernel to 0x08508000. This is done to have a fixed address where the
+ *   C-parts (misc.c) are executed. This address must be known at compile-time,
+ *   but the load-address of the kernel depends on how much memory is installed.
+ * - Jump to this location.
+ * - Set r8 with 0, r7 with the architecture ID for head.S
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+	
+		.section	".start", "ax"
+
+		b	__beginning
+	
+__ofw_data:	.long	0				@ the number of memory blocks
+		.space  128				@ (startaddr,size) ...
+		.space  128				@ bootargs
+		.align
+
+__beginning:	mov	r4, r0				@ save the entry to the firmware
+
+		mov	r0, #0xC0			@ disable irq and fiq
+		mov	r1, r0
+		mrs	r3, cpsr
+		bic	r2, r3, r0
+		eor	r2, r2, r1
+		msr	cpsr_c, r2
+
+		mov	r0, r4				@ get the Memory layout from firmware
+		adr	r1, __ofw_data
+		add	r2, r1, #4
+		mov	lr, pc
+		b	ofw_init
+		mov	r1, #0
+
+		adr	r2, __mmu_off			@ calculate physical address
+		sub	r2, r2, #0xf0000000		@ openprom maps us at f000 virt, 0e50 phys
+		adr	r0, __ofw_data
+		ldr	r0, [r0, #4]
+		add	r2, r2, r0
+		add	r2, r2, #0x00500000
+
+		mrc	p15, 0, r3, c1, c0
+		bic	r3, r3, #0xC			@ Write Buffer and DCache
+		bic	r3, r3, #0x1000			@ ICache
+		mcr	p15, 0, r3, c1, c0		@ disabled
+
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c7		@ flush I,D caches on v4
+		mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
+		mcr	p15, 0, r0, c8, c7		@ flush I,D TLBs on v4
+
+		bic	r3, r3, #0x1			@ MMU
+		mcr	p15, 0, r3, c1, c0		@ disabled
+
+		mov	pc, r2
+
+__copy_target:	.long	0x08508000
+__copy_end:	.long	0x08608000
+		
+		.word	_start
+		.word	__bss_start
+
+		.align
+__temp_stack:	.space 128
+
+__mmu_off:
+		adr	r0, __ofw_data
+		ldr	r0, [r0, #4]
+		orr	r0, r0, #0x00600000
+	
+		ldr	r1, __copy_end
+		ldr	r3, __copy_target
+
+/* r0 = 0x0e600000 (current end of kernelcode)
+ * r3 = 0x08508000 (where it should begin)
+ * r1 = 0x08608000 (end of copying area, 1MB)
+ * The kernel is compressed, so 1 MB should be enough.
+ * copy the kernel to the beginning of physical memory
+ * We start from the highest address, so we can copy
+ * from 0x08500000 to 0x08508000 if we have only 8MB
+ */
+
+	
+__Copy:		ldr	r2, [r0], #-4
+		str	r2, [r1], #-4
+		teq	r1, r3
+		bne	__Copy
+		/* and jump to it */
+		adr	r2, __go_on
+		adr	r0, __ofw_data
+		ldr	r0, [r0, #4]
+		sub	r2, r2, r0
+		sub	r2, r2, #0x00500000
+		ldr	r0, __copy_target
+		add	r2, r2, r0
+		mov	pc, r2
+
+__go_on:
+		adr	sp, __temp_stack
+		add	sp, sp, #128
+		adr	r0, __ofw_data
+		mov	lr, pc
+		b	create_params
+	
+		mov	r8, #0
+		mov	r7, #15
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S
new file mode 100644
index 0000000..d6bf8a2
--- /dev/null
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -0,0 +1,92 @@
+/*
+ * linux/arch/arm/boot/compressed/head-sharpsl.S
+ *
+ * Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
+ *
+ * Sharp's bootloader doesn't pass any kind of machine ID
+ * so we have to figure out the machine for ourselves...
+ *
+ * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
+ * and Husky (SL-C760).
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_PXA_SHARPSL
+#error What am I doing here...
+#endif
+
+		.section        ".start", "ax"
+
+__SharpSL_start:
+
+	ldr	r1, .W100ADDR		@ Base address of w100 chip + regs offset
+
+	mov r6, #0x31			@ Load Magic Init value
+	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
+	mov r5, #0x3000
+.W100LOOP:
+	subs r5, r5, #1
+    bne .W100LOOP
+	mov r6, #0x30			@ Load 2nd Magic Init value
+	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
+
+	ldr	r6, [r1, #0]		@ Load Chip ID
+	ldr	r3, .W100ID
+	ldr	r7, .POODLEID
+	cmp	r6, r3
+	bne	.SHARPEND			@ We have no w100 - Poodle
+
+	mrc p15, 0, r6, c0, c0	@ Get Processor ID
+	and	r6, r6, #0xffffff00
+	ldr	r7, .CORGIID
+	ldr	r3, .PXA255ID
+	cmp	r6, r3
+	blo	.SHARPEND			@ We have a PXA250 - Corgi
+
+	mov	r1, #0x0c000000		@ Base address of NAND chip
+	ldrb	r3, [r1, #24]	@ Load FLASHCTL
+	bic	r3, r3, #0x11		@ SET NCE
+	orr	r3, r3, #0x0a		@ SET CLR + FLWP
+	strb	r3, [r1, #24]	@ Save to FLASHCTL
+	mov 	r2, #0x90		@ Command "readid"
+	strb	r2, [r1, #20]	@ Save to FLASHIO
+	bic	r3, r3, #2			@ CLR CLE
+	orr	r3, r3, #4			@ SET ALE
+	strb	r3, [r1, #24]	@ Save to FLASHCTL
+	mov		r2, #0			@ Address 0x00
+	strb	r2, [r1, #20]	@ Save to FLASHIO
+	bic	r3, r3, #4			@ CLR ALE
+	strb	r3, [r1, #24]	@ Save to FLASHCTL
+.SHARP1:
+	ldrb	r3, [r1, #24]	@ Load FLASHCTL
+	tst	r3, #32				@ Is chip ready?
+	beq	.SHARP1
+	ldrb	r2, [r1, #20]	@ NAND Manufacturer ID
+	ldrb	r3, [r1, #20]	@ NAND Chip ID
+	ldr	r7, .SHEPHERDID
+	cmp	r3, #0x76			@ 64MiB flash
+	beq	.SHARPEND			@ We have Shepherd
+	ldr	r7, .HUSKYID		@ Must be Husky
+	b .SHARPEND
+
+.PXA255ID:
+	.word	0x69052d00		@ PXA255 Processor ID
+.W100ID:
+	.word	0x57411002		@ w100 Chip ID
+.W100ADDR:
+	.word 	0x08010000		@ w100 Chip ID Reg Address
+.POODLEID:
+	.word	MACH_TYPE_POODLE
+.CORGIID:
+	.word	MACH_TYPE_CORGI
+.SHEPHERDID:
+	.word	MACH_TYPE_SHEPHERD
+.HUSKYID:
+	.word	MACH_TYPE_HUSKY
+.SHARPEND:
+
+
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
new file mode 100644
index 0000000..665bd2c
--- /dev/null
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/boot/compressed/head-xscale.S
+ *
+ * XScale specific tweaks.  This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+		.section        ".start", "ax"
+
+__XScale_start:
+
+		@ Preserve r8/r7 i.e. kernel entry values
+
+		@ Data cache might be active.
+		@ Be sure to flush kernel binary out of the cache,
+		@ whatever state it is, before it is turned off.
+		@ This is done by fetching through currently executed
+		@ memory to be sure we hit the same cache.
+		bic	r2, pc, #0x1f
+		add	r3, r2, #0x10000	@ 64 kb is quite enough...
+1:		ldr	r0, [r2], #32
+		teq	r2, r3
+		bne	1b
+		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
+		mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
+
+		@ disabling MMU and caches
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #0x05		@ clear DC, MMU
+		bic	r0, r0, #0x1000		@ clear Icache
+		mcr	p15, 0, r0, c1, c0, 0
+
+#ifdef CONFIG_ARCH_LUBBOCK
+		mov	r7, #MACH_TYPE_LUBBOCK
+#endif
+
+#ifdef CONFIG_ARCH_COTULLA_IDP
+		mov	r7, #MACH_TYPE_COTULLA_IDP
+#endif
+
+#ifdef  CONFIG_MACH_GTWX5715
+               mov     r7, #(MACH_TYPE_GTWX5715 & 0xff)
+               orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
+#endif
+
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
new file mode 100644
index 0000000..c0e7aff
--- /dev/null
+++ b/arch/arm/boot/compressed/head.S
@@ -0,0 +1,786 @@
+/*
+ *  linux/arch/arm/boot/compressed/head.S
+ *
+ *  Copyright (C) 1996-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+
+/*
+ * Debugging stuff
+ *
+ * Note that these macros must not contain any code which is not
+ * 100% relocatable.  Any attempt to do so will result in a crash.
+ * Please select one of the following when turning on debugging.
+ */
+#ifdef DEBUG
+#if defined(CONFIG_DEBUG_DC21285_PORT)
+		.macro	loadsp, rb
+		mov	\rb, #0x42000000
+		.endm
+		.macro	writeb, rb
+		str	\rb, [r3, #0x160]
+		.endm
+#elif defined(CONFIG_DEBUG_ICEDCC)
+		.macro	loadsp, rb
+		.endm
+		.macro writeb, rb
+		mcr	p14, 0, \rb, c0, c1, 0
+		.endm
+#elif defined(CONFIG_FOOTBRIDGE)
+		.macro	loadsp,	rb
+		mov	\rb, #0x7c000000
+		.endm
+		.macro	writeb,	rb
+		strb	\rb, [r3, #0x3f8]
+		.endm
+#elif defined(CONFIG_ARCH_RPC)
+		.macro	loadsp,	rb
+		mov	\rb, #0x03000000
+		orr	\rb, \rb, #0x00010000
+		.endm
+		.macro	writeb,	rb
+		strb	\rb, [r3, #0x3f8 << 2]
+		.endm
+#elif defined(CONFIG_ARCH_INTEGRATOR)
+		.macro	loadsp, rb
+		mov	\rb, #0x16000000
+		.endm
+		.macro	writeb, rb
+		strb	\rb, [r3, #0]
+		.endm
+#elif defined(CONFIG_ARCH_PXA) /* Xscale-type */
+		.macro 	loadsp, rb
+		mov	\rb, #0x40000000
+		orr	\rb, \rb, #0x00100000
+		.endm
+		.macro	writeb, rb
+		strb	\rb, [r3, #0]
+		.endm
+#elif defined(CONFIG_ARCH_SA1100)
+		.macro	loadsp, rb
+		mov	\rb, #0x80000000	@ physical base address
+#  if defined(CONFIG_DEBUG_LL_SER3)
+		add	\rb, \rb, #0x00050000	@ Ser3
+#  else
+		add	\rb, \rb, #0x00010000	@ Ser1
+#  endif
+		.endm
+		.macro	writeb, rb
+		str	\rb, [r3, #0x14]	@ UTDR
+		.endm
+#elif defined(CONFIG_ARCH_IXP4XX)
+		.macro	loadsp, rb
+		mov	\rb, #0xc8000000
+		.endm
+		.macro	writeb, rb
+		str	\rb, [r3, #0]
+#elif defined(CONFIG_ARCH_IXP2000)
+		.macro	loadsp, rb
+		mov	\rb, #0xc0000000
+		orr	\rb, \rb, #0x00030000
+		.endm
+		.macro	writeb, rb
+		str	\rb, [r3, #0]
+		.endm
+#elif defined(CONFIG_ARCH_LH7A40X)
+		.macro	loadsp, rb
+		ldr	\rb, =0x80000700	@ UART2 UARTBASE
+		.endm
+		.macro	writeb, rb
+		strb	\rb, [r3, #0]
+		.endm
+#elif defined(CONFIG_ARCH_OMAP)
+		.macro  loadsp, rb
+		mov	\rb, #0xff000000	@ physical base address
+		add	\rb, \rb, #0x00fb0000
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		add	\rb, \rb, #0x00000800
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rb, \rb, #0x00009000
+#endif
+		.endm
+		.macro	writeb, rb
+		strb	\rb, [r3]
+		.endm
+#elif defined(CONFIG_ARCH_IOP331)
+		.macro loadsp, rb
+                mov   	\rb, #0xff000000
+                orr     \rb, \rb, #0x00ff0000
+                orr     \rb, \rb, #0x0000f700   @ location of the UART
+		.endm
+		.macro	writeb, rb
+		str	\rb, [r3, #0]
+		.endm
+#elif defined(CONFIG_ARCH_S3C2410)
+			.macro loadsp, rb
+		mov	\rb, #0x50000000
+		add	\rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
+		.endm
+		.macro	writeb, rb
+		strb	\rb, [r3, #0x20]
+		.endm
+#else
+#error no serial architecture defined
+#endif
+#endif
+
+		.macro	kputc,val
+		mov	r0, \val
+		bl	putc
+		.endm
+
+		.macro	kphex,val,len
+		mov	r0, \val
+		mov	r1, #\len
+		bl	phex
+		.endm
+
+		.macro	debug_reloc_start
+#ifdef DEBUG
+		kputc	#'\n'
+		kphex	r6, 8		/* processor id */
+		kputc	#':'
+		kphex	r7, 8		/* architecture id */
+		kputc	#':'
+		mrc	p15, 0, r0, c1, c0
+		kphex	r0, 8		/* control reg */
+		kputc	#'\n'
+		kphex	r5, 8		/* decompressed kernel start */
+		kputc	#'-'
+		kphex	r8, 8		/* decompressed kernel end  */
+		kputc	#'>'
+		kphex	r4, 8		/* kernel execution address */
+		kputc	#'\n'
+#endif
+		.endm
+
+		.macro	debug_reloc_end
+#ifdef DEBUG
+		kphex	r5, 8		/* end of kernel */
+		kputc	#'\n'
+		mov	r0, r4
+		bl	memdump		/* dump 256 bytes at start of kernel */
+#endif
+		.endm
+
+		.section ".start", #alloc, #execinstr
+/*
+ * sort out different calling conventions
+ */
+		.align
+start:
+		.type	start,#function
+		.rept	8
+		mov	r0, r0
+		.endr
+
+		b	1f
+		.word	0x016f2818		@ Magic numbers to help the loader
+		.word	start			@ absolute load/run zImage address
+		.word	_edata			@ zImage end address
+1:		mov	r7, r1			@ save architecture ID
+		mov	r8, #0			@ save r0
+
+#ifndef __ARM_ARCH_2__
+		/*
+		 * Booting from Angel - need to enter SVC mode and disable
+		 * FIQs/IRQs (numeric definitions from angel arm.h source).
+		 * We only do this if we were in user mode on entry.
+		 */
+		mrs	r2, cpsr		@ get current mode
+		tst	r2, #3			@ not user?
+		bne	not_angel
+		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
+		swi	0x123456		@ angel_SWI_ARM
+not_angel:
+		mrs	r2, cpsr		@ turn off interrupts to
+		orr	r2, r2, #0xc0		@ prevent angel from running
+		msr	cpsr_c, r2
+#else
+		teqp	pc, #0x0c000003		@ turn off interrupts
+#endif
+
+		/*
+		 * Note that some cache flushing and other stuff may
+		 * be needed here - is there an Angel SWI call for this?
+		 */
+
+		/*
+		 * some architecture specific code can be inserted
+		 * by the linker here, but it should preserve r7 and r8.
+		 */
+
+		.text
+		adr	r0, LC0
+		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+		subs	r0, r0, r1		@ calculate the delta offset
+
+						@ if delta is zero, we are
+		beq	not_relocated		@ running at the address we
+						@ were linked at.
+
+		/*
+		 * We're running at a different address.  We need to fix
+		 * up various pointers:
+		 *   r5 - zImage base address
+		 *   r6 - GOT start
+		 *   ip - GOT end
+		 */
+		add	r5, r5, r0
+		add	r6, r6, r0
+		add	ip, ip, r0
+
+#ifndef CONFIG_ZBOOT_ROM
+		/*
+		 * If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
+		 * we need to fix up pointers into the BSS region.
+		 *   r2 - BSS start
+		 *   r3 - BSS end
+		 *   sp - stack pointer
+		 */
+		add	r2, r2, r0
+		add	r3, r3, r0
+		add	sp, sp, r0
+
+		/*
+		 * Relocate all entries in the GOT table.
+		 */
+1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+		add	r1, r1, r0		@ table.  This fixes up the
+		str	r1, [r6], #4		@ C references.
+		cmp	r6, ip
+		blo	1b
+#else
+
+		/*
+		 * Relocate entries in the GOT table.  We only relocate
+		 * the entries that are outside the (relocated) BSS region.
+		 */
+1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+		cmp	r1, r2			@ entry < bss_start ||
+		cmphs	r3, r1			@ _end < entry
+		addlo	r1, r1, r0		@ table.  This fixes up the
+		str	r1, [r6], #4		@ C references.
+		cmp	r6, ip
+		blo	1b
+#endif
+
+not_relocated:	mov	r0, #0
+1:		str	r0, [r2], #4		@ clear bss
+		str	r0, [r2], #4
+		str	r0, [r2], #4
+		str	r0, [r2], #4
+		cmp	r2, r3
+		blo	1b
+
+		/*
+		 * The C runtime environment should now be setup
+		 * sufficiently.  Turn the cache on, set up some
+		 * pointers, and start decompressing.
+		 */
+		bl	cache_on
+
+		mov	r1, sp			@ malloc space above stack
+		add	r2, sp, #0x10000	@ 64k max
+
+/*
+ * Check to see if we will overwrite ourselves.
+ *   r4 = final kernel address
+ *   r5 = start of this image
+ *   r2 = end of malloc space (and therefore this image)
+ * We basically want:
+ *   r4 >= r2 -> OK
+ *   r4 + image length <= r5 -> OK
+ */
+		cmp	r4, r2
+		bhs	wont_overwrite
+		add	r0, r4, #4096*1024	@ 4MB largest kernel size
+		cmp	r0, r5
+		bls	wont_overwrite
+
+		mov	r5, r2			@ decompress after malloc space
+		mov	r0, r5
+		mov	r3, r7
+		bl	decompress_kernel
+
+		add	r0, r0, #127
+		bic	r0, r0, #127		@ align the kernel length
+/*
+ * r0     = decompressed kernel length
+ * r1-r3  = unused
+ * r4     = kernel execution address
+ * r5     = decompressed kernel start
+ * r6     = processor ID
+ * r7     = architecture ID
+ * r8-r14 = unused
+ */
+		add	r1, r5, r0		@ end of decompressed kernel
+		adr	r2, reloc_start
+		ldr	r3, LC1
+		add	r3, r2, r3
+1:		ldmia	r2!, {r8 - r13}		@ copy relocation code
+		stmia	r1!, {r8 - r13}
+		ldmia	r2!, {r8 - r13}
+		stmia	r1!, {r8 - r13}
+		cmp	r2, r3
+		blo	1b
+
+		bl	cache_clean_flush
+		add	pc, r5, r0		@ call relocation code
+
+/*
+ * We're not in danger of overwriting ourselves.  Do this the simple way.
+ *
+ * r4     = kernel execution address
+ * r7     = architecture ID
+ */
+wont_overwrite:	mov	r0, r4
+		mov	r3, r7
+		bl	decompress_kernel
+		b	call_kernel
+
+		.type	LC0, #object
+LC0:		.word	LC0			@ r1
+		.word	__bss_start		@ r2
+		.word	_end			@ r3
+		.word	zreladdr		@ r4
+		.word	_start			@ r5
+		.word	_got_start		@ r6
+		.word	_got_end		@ ip
+		.word	user_stack+4096		@ sp
+LC1:		.word	reloc_end - reloc_start
+		.size	LC0, . - LC0
+
+#ifdef CONFIG_ARCH_RPC
+		.globl	params
+params:		ldr	r0, =params_phys
+		mov	pc, lr
+		.ltorg
+		.align
+#endif
+
+/*
+ * Turn on the cache.  We need to setup some page tables so that we
+ * can have both the I and D caches on.
+ *
+ * We place the page tables 16k down from the kernel execution address,
+ * and we hope that nothing else is using it.  If we're using it, we
+ * will go pop!
+ *
+ * On entry,
+ *  r4 = kernel execution address
+ *  r6 = processor ID
+ *  r7 = architecture number
+ *  r8 = run-time address of "start"
+ * On exit,
+ *  r1, r2, r3, r8, r9, r12 corrupted
+ * This routine must preserve:
+ *  r4, r5, r6, r7
+ */
+		.align	5
+cache_on:	mov	r3, #8			@ cache_on function
+		b	call_cache_fn
+
+__setup_mmu:	sub	r3, r4, #16384		@ Page directory size
+		bic	r3, r3, #0xff		@ Align the pointer
+		bic	r3, r3, #0x3f00
+/*
+ * Initialise the page tables, turning on the cacheable and bufferable
+ * bits for the RAM area only.
+ */
+		mov	r0, r3
+		mov	r8, r0, lsr #18
+		mov	r8, r8, lsl #18		@ start of RAM
+		add	r9, r8, #0x10000000	@ a reasonable RAM size
+		mov	r1, #0x12
+		orr	r1, r1, #3 << 10
+		add	r2, r3, #16384
+1:		cmp	r1, r8			@ if virt > start of RAM
+		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
+		cmp	r1, r9			@ if virt > end of RAM
+		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
+		str	r1, [r0], #4		@ 1:1 mapping
+		add	r1, r1, #1048576
+		teq	r0, r2
+		bne	1b
+/*
+ * If ever we are running from Flash, then we surely want the cache
+ * to be enabled also for our execution instance...  We map 2MB of it
+ * so there is no map overlap problem for up to 1 MB compressed kernel.
+ * If the execution is in RAM then we would only be duplicating the above.
+ */
+		mov	r1, #0x1e
+		orr	r1, r1, #3 << 10
+		mov	r2, pc, lsr #20
+		orr	r1, r1, r2, lsl #20
+		add	r0, r3, r2, lsl #2
+		str	r1, [r0], #4
+		add	r1, r1, #1048576
+		str	r1, [r0]
+		mov	pc, lr
+
+__armv4_cache_on:
+		mov	r12, lr
+		bl	__setup_mmu
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
+		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
+		orr	r0, r0, #0x0030
+		bl	__common_cache_on
+		mov	r0, #0
+		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+		mov	pc, r12
+
+__arm6_cache_on:
+		mov	r12, lr
+		bl	__setup_mmu
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
+		mov	r0, #0x30
+		bl	__common_cache_on
+		mov	r0, #0
+		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
+		mov	pc, r12
+
+__common_cache_on:
+#ifndef DEBUG
+		orr	r0, r0, #0x000d		@ Write buffer, mmu
+#endif
+		mov	r1, #-1
+		mcr	p15, 0, r3, c2, c0, 0	@ load page table pointer
+		mcr	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcr	p15, 0, r0, c1, c0, 0	@ load control register
+		mov	pc, lr
+
+/*
+ * All code following this line is relocatable.  It is relocated by
+ * the above code to the end of the decompressed kernel image and
+ * executed there.  During this time, we have no stacks.
+ *
+ * r0     = decompressed kernel length
+ * r1-r3  = unused
+ * r4     = kernel execution address
+ * r5     = decompressed kernel start
+ * r6     = processor ID
+ * r7     = architecture ID
+ * r8-r14 = unused
+ */
+		.align	5
+reloc_start:	add	r8, r5, r0
+		debug_reloc_start
+		mov	r1, r4
+1:
+		.rept	4
+		ldmia	r5!, {r0, r2, r3, r9 - r13}	@ relocate kernel
+		stmia	r1!, {r0, r2, r3, r9 - r13}
+		.endr
+
+		cmp	r5, r8
+		blo	1b
+		debug_reloc_end
+
+call_kernel:	bl	cache_clean_flush
+		bl	cache_off
+		mov	r0, #0
+		mov	r1, r7			@ restore architecture number
+		mov	pc, r4			@ call kernel
+
+/*
+ * Here follow the relocatable cache support functions for the
+ * various processors.  This is a generic hook for locating an
+ * entry and jumping to an instruction at the specified offset
+ * from the start of the block.  Please note this is all position
+ * independent code.
+ *
+ *  r1  = corrupted
+ *  r2  = corrupted
+ *  r3  = block offset
+ *  r6  = corrupted
+ *  r12 = corrupted
+ */
+
+call_cache_fn:	adr	r12, proc_types
+		mrc	p15, 0, r6, c0, c0	@ get processor ID
+1:		ldr	r1, [r12, #0]		@ get value
+		ldr	r2, [r12, #4]		@ get mask
+		eor	r1, r1, r6		@ (real ^ match)
+		tst	r1, r2			@       & mask
+		addeq	pc, r12, r3		@ call cache function
+		add	r12, r12, #4*5
+		b	1b
+
+/*
+ * Table for cache operations.  This is basically:
+ *   - CPU ID match
+ *   - CPU ID mask
+ *   - 'cache on' method instruction
+ *   - 'cache off' method instruction
+ *   - 'cache flush' method instruction
+ *
+ * We match an entry using: ((real_id ^ match) & mask) == 0
+ *
+ * Writethrough caches generally only need 'on' and 'off'
+ * methods.  Writeback caches _must_ have the flush method
+ * defined.
+ */
+		.type	proc_types,#object
+proc_types:
+		.word	0x41560600		@ ARM6/610
+		.word	0xffffffe0
+		b	__arm6_cache_off	@ works, but slow
+		b	__arm6_cache_off
+		mov	pc, lr
+@		b	__arm6_cache_on		@ untested
+@		b	__arm6_cache_off
+@		b	__armv3_cache_flush
+
+		.word	0x00000000		@ old ARM ID
+		.word	0x0000f000
+		mov	pc, lr
+		mov	pc, lr
+		mov	pc, lr
+
+		.word	0x41007000		@ ARM7/710
+		.word	0xfff8fe00
+		b	__arm7_cache_off
+		b	__arm7_cache_off
+		mov	pc, lr
+
+		.word	0x41807200		@ ARM720T (writethrough)
+		.word	0xffffff00
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		mov	pc, lr
+
+		.word	0x00007000		@ ARM7 IDs
+		.word	0x0000f000
+		mov	pc, lr
+		mov	pc, lr
+		mov	pc, lr
+
+		@ Everything from here on will be the new ID system.
+
+		.word	0x4401a100		@ sa110 / sa1100
+		.word	0xffffffe0
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv4_cache_flush
+
+		.word	0x6901b110		@ sa1110
+		.word	0xfffffff0
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv4_cache_flush
+
+		@ These match on the architecture ID
+
+		.word	0x00020000		@ ARMv4T
+		.word	0x000f0000
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv4_cache_flush
+
+		.word	0x00050000		@ ARMv5TE
+		.word	0x000f0000
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv4_cache_flush
+
+		.word	0x00060000		@ ARMv5TEJ
+		.word	0x000f0000
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv4_cache_flush
+
+		.word	0x00070000		@ ARMv6
+		.word	0x000f0000
+		b	__armv4_cache_on
+		b	__armv4_cache_off
+		b	__armv6_cache_flush
+
+		.word	0			@ unrecognised type
+		.word	0
+		mov	pc, lr
+		mov	pc, lr
+		mov	pc, lr
+
+		.size	proc_types, . - proc_types
+
+/*
+ * Turn off the Cache and MMU.  ARMv3 does not support
+ * reading the control register, but ARMv4 does.
+ *
+ * On entry,  r6 = processor ID
+ * On exit,   r0, r1, r2, r3, r12 corrupted
+ * This routine must preserve: r4, r6, r7
+ */
+		.align	5
+cache_off:	mov	r3, #12			@ cache_off function
+		b	call_cache_fn
+
+__armv4_cache_off:
+		mrc	p15, 0, r0, c1, c0
+		bic	r0, r0, #0x000d
+		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
+		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
+		mov	pc, lr
+
+__arm6_cache_off:
+		mov	r0, #0x00000030		@ ARM6 control reg.
+		b	__armv3_cache_off
+
+__arm7_cache_off:
+		mov	r0, #0x00000070		@ ARM7 control reg.
+		b	__armv3_cache_off
+
+__armv3_cache_off:
+		mcr	p15, 0, r0, c1, c0, 0	@ turn MMU and cache off
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
+		mov	pc, lr
+
+/*
+ * Clean and flush the cache to maintain consistency.
+ *
+ * On entry,
+ *  r6 = processor ID
+ * On exit,
+ *  r1, r2, r3, r11, r12 corrupted
+ * This routine must preserve:
+ *  r0, r4, r5, r6, r7
+ */
+		.align	5
+cache_clean_flush:
+		mov	r3, #16
+		b	call_cache_fn
+
+__armv6_cache_flush:
+		mov	r1, #0
+		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
+		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I+BTB
+		mcr	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
+		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
+		mov	pc, lr
+
+__armv4_cache_flush:
+		mov	r2, #64*1024		@ default: 32K dcache size (*2)
+		mov	r11, #32		@ default: 32 byte line size
+		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
+		teq	r3, r6			@ cache ID register present?
+		beq	no_cache_id
+		mov	r1, r3, lsr #18
+		and	r1, r1, #7
+		mov	r2, #1024
+		mov	r2, r2, lsl r1		@ base dcache size *2
+		tst	r3, #1 << 14		@ test M bit
+		addne	r2, r2, r2, lsr #1	@ +1/2 size if M == 1
+		mov	r3, r3, lsr #12
+		and	r3, r3, #3
+		mov	r11, #8
+		mov	r11, r11, lsl r3	@ cache line size in bytes
+no_cache_id:
+		bic	r1, pc, #63		@ align to longest cache line
+		add	r2, r1, r2
+1:		ldr	r3, [r1], r11		@ s/w flush D cache
+		teq	r1, r2
+		bne	1b
+
+		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
+		mcr	p15, 0, r1, c7, c6, 0	@ flush D cache
+		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
+		mov	pc, lr
+
+__armv3_cache_flush:
+		mov	r1, #0
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mov	pc, lr
+
+/*
+ * Various debugging routines for printing hex characters and
+ * memory, which again must be relocatable.
+ */
+#ifdef DEBUG
+		.type	phexbuf,#object
+phexbuf:	.space	12
+		.size	phexbuf, . - phexbuf
+
+phex:		adr	r3, phexbuf
+		mov	r2, #0
+		strb	r2, [r3, r1]
+1:		subs	r1, r1, #1
+		movmi	r0, r3
+		bmi	puts
+		and	r2, r0, #15
+		mov	r0, r0, lsr #4
+		cmp	r2, #10
+		addge	r2, r2, #7
+		add	r2, r2, #'0'
+		strb	r2, [r3, r1]
+		b	1b
+
+puts:		loadsp	r3
+1:		ldrb	r2, [r0], #1
+		teq	r2, #0
+		moveq	pc, lr
+2:		writeb	r2
+		mov	r1, #0x00020000
+3:		subs	r1, r1, #1
+		bne	3b
+		teq	r2, #'\n'
+		moveq	r2, #'\r'
+		beq	2b
+		teq	r0, #0
+		bne	1b
+		mov	pc, lr
+putc:
+		mov	r2, r0
+		mov	r0, #0
+		loadsp	r3
+		b	2b
+
+memdump:	mov	r12, r0
+		mov	r10, lr
+		mov	r11, #0
+2:		mov	r0, r11, lsl #2
+		add	r0, r0, r12
+		mov	r1, #8
+		bl	phex
+		mov	r0, #':'
+		bl	putc
+1:		mov	r0, #' '
+		bl	putc
+		ldr	r0, [r12, r11, lsl #2]
+		mov	r1, #8
+		bl	phex
+		and	r0, r11, #7
+		teq	r0, #3
+		moveq	r0, #' '
+		bleq	putc
+		and	r0, r11, #7
+		add	r11, r11, #1
+		teq	r0, #7
+		bne	1b
+		mov	r0, #'\n'
+		bl	putc
+		cmp	r11, #64
+		blt	2b
+		mov	pc, r10
+#endif
+
+reloc_end:
+
+		.align
+		.section ".stack", "w"
+user_stack:	.space	4096
diff --git a/arch/arm/boot/compressed/ice-dcc.S b/arch/arm/boot/compressed/ice-dcc.S
new file mode 100644
index 0000000..104377a
--- /dev/null
+++ b/arch/arm/boot/compressed/ice-dcc.S
@@ -0,0 +1,17 @@
+
+
+	.text
+
+	.global	icedcc_putc
+
+icedcc_putc:
+	mov	r2, #0x4000000
+1:
+	subs	r2, r2, #1
+	movlt	pc, r14
+	mrc	p14, 0, r1, c0, c0, 0
+	tst	r1, #2
+	bne	1b
+
+	mcr	p14, 0, r0, c1, c0, 0
+	mov	pc, r14
diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
new file mode 100644
index 0000000..d7bbd9d
--- /dev/null
+++ b/arch/arm/boot/compressed/ll_char_wr.S
@@ -0,0 +1,134 @@
+/*
+ *  linux/arch/arm/lib/ll_char_wr.S
+ *
+ *  Copyright (C) 1995, 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
+ *
+ *  10-04-96	RMK	Various cleanups & reduced register usage.
+ *  08-04-98	RMK	Shifts re-ordered
+ */
+
+@ Regs: [] = corruptible
+@       {} = used
+@       () = do not use
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+	.text
+
+LC0:	.word	LC0
+	.word	bytes_per_char_h
+	.word	video_size_row
+	.word	acorndata_8x8
+	.word	con_charconvtable
+
+/*
+ * r0 = ptr
+ * r1 = char
+ * r2 = white
+ */
+ENTRY(ll_write_char)
+	stmfd	sp!, {r4 - r7, lr}
+@
+@ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc)
+@
+	/*
+	 * calculate offset into character table
+	 */
+	mov	r1, r1, lsl #3
+	/*
+	 * calculate offset required for each row.
+	 */
+	adr	ip, LC0
+	ldmia	ip, {r3, r4, r5, r6, lr}
+	sub	ip, ip, r3
+	add	r6, r6, ip
+	add	lr, lr, ip
+	ldr	r4, [r4, ip]
+	ldr	r5, [r5, ip]
+	/*
+	 * Go to resolution-dependent routine...
+	 */
+	cmp	r4, #4
+	blt	Lrow1bpp
+	add	r0, r0, r5, lsl #3		@ Move to bottom of character
+	orr	r1, r1, #7
+	ldrb	r7, [r6, r1]
+	teq	r4, #8
+	beq	Lrow8bpplp
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
+@
+Lrow4bpplp:
+	ldr	r7, [lr, r7, lsl #2]
+	mul	r7, r2, r7
+	sub	r1, r1, #1			@ avoid using r7 directly after
+	str	r7, [r0, -r5]!
+	ldrb	r7, [r6, r1]
+	ldr	r7, [lr, r7, lsl #2]
+	mul	r7, r2, r7
+	tst	r1, #7				@ avoid using r7 directly after
+	str	r7, [r0, -r5]!
+	subne	r1, r1, #1
+	ldrneb	r7, [r6, r1]
+	bne	Lrow4bpplp
+	LOADREGS(fd, sp!, {r4 - r7, pc})
+
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
+@
+Lrow8bpplp:
+	mov	ip, r7, lsr #4
+	ldr	ip, [lr, ip, lsl #2]
+	mul	r4, r2, ip
+	and	ip, r7, #15			@ avoid r4
+	ldr	ip, [lr, ip, lsl #2]		@ avoid r4
+	mul	ip, r2, ip			@ avoid r4
+	sub	r1, r1, #1			@ avoid ip
+	sub	r0, r0, r5			@ avoid ip
+	stmia	r0, {r4, ip}
+	ldrb	r7, [r6, r1]
+	mov	ip, r7, lsr #4
+	ldr	ip, [lr, ip, lsl #2]
+	mul	r4, r2, ip
+	and	ip, r7, #15			@ avoid r4
+	ldr	ip, [lr, ip, lsl #2]		@ avoid r4
+	mul	ip, r2, ip			@ avoid r4
+	tst	r1, #7				@ avoid ip
+	sub	r0, r0, r5			@ avoid ip
+	stmia	r0, {r4, ip}
+	subne	r1, r1, #1
+	ldrneb	r7, [r6, r1]
+	bne	Lrow8bpplp
+	LOADREGS(fd, sp!, {r4 - r7, pc})
+
+@
+@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
+@
+Lrow1bpp:
+	add	r6, r6, r1
+	ldmia	r6, {r4, r7}
+	strb	r4, [r0], r5
+	mov	r4, r4, lsr #8
+	strb	r4, [r0], r5
+	mov	r4, r4, lsr #8
+	strb	r4, [r0], r5
+	mov	r4, r4, lsr #8
+	strb	r4, [r0], r5
+	strb	r7, [r0], r5
+	mov	r7, r7, lsr #8
+	strb	r7, [r0], r5
+	mov	r7, r7, lsr #8
+	strb	r7, [r0], r5
+	mov	r7, r7, lsr #8
+	strb	r7, [r0], r5
+	LOADREGS(fd, sp!, {r4 - r7, pc})
+
+	.bss
+ENTRY(con_charconvtable)
+	.space	1024
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
new file mode 100644
index 0000000..23434b5
--- /dev/null
+++ b/arch/arm/boot/compressed/misc.c
@@ -0,0 +1,329 @@
+/*
+ * misc.c
+ * 
+ * This is a collection of several routines from gzip-1.0.3 
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Modified for ARM Linux by Russell King
+ *
+ * Nicolas Pitre <nico@visuaide.com>  1999/04/14 :
+ *  For this code to run directly from Flash, all constant variables must
+ *  be marked with 'const' and all other variables initialized at run-time 
+ *  only.  This way all non constant variables will end up in the bss segment,
+ *  which should point to addresses in RAM and cleared to 0 on start.
+ *  This allows for a much quicker boot time.
+ */
+
+unsigned int __machine_arch_type;
+
+#include <linux/string.h>
+
+#include <asm/arch/uncompress.h>
+
+#ifdef STANDALONE_DEBUG
+#define putstr printf
+#endif
+
+#ifdef CONFIG_DEBUG_ICEDCC
+#define putstr icedcc_putstr
+#define putc icedcc_putc
+
+extern void idedcc_putc(int ch);
+
+static void
+icedcc_putstr(const char *ptr)
+{
+	for (; *ptr != '\0'; ptr++) {
+		icedcc_putc(*ptr);
+	}
+}
+
+#endif
+
+#define __ptr_t void *
+
+/*
+ * Optimised C version of memzero for the ARM.
+ */
+void __memzero (__ptr_t s, size_t n)
+{
+	union { void *vp; unsigned long *ulp; unsigned char *ucp; } u;
+	int i;
+
+	u.vp = s;
+
+	for (i = n >> 5; i > 0; i--) {
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+	}
+
+	if (n & 1 << 4) {
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+	}
+
+	if (n & 1 << 3) {
+		*u.ulp++ = 0;
+		*u.ulp++ = 0;
+	}
+
+	if (n & 1 << 2)
+		*u.ulp++ = 0;
+
+	if (n & 1 << 1) {
+		*u.ucp++ = 0;
+		*u.ucp++ = 0;
+	}
+
+	if (n & 1)
+		*u.ucp++ = 0;
+}
+
+static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
+			    size_t __n)
+{
+	int i = 0;
+	unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+	for (i = __n >> 3; i > 0; i--) {
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (__n & 1 << 2) {
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (__n & 1 << 1) {
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (__n & 1)
+		*d++ = *s++;
+
+	return __dest;
+}
+
+/*
+ * gzip delarations
+ */
+#define OF(args)  args
+#define STATIC static
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define WSIZE 0x8000		/* Window size must be at least 32k, */
+				/* and a power of two */
+
+static uch *inbuf;		/* input buffer */
+static uch window[WSIZE];	/* Sliding window buffer */
+
+static unsigned insize;		/* valid bytes in inbuf */
+static unsigned inptr;		/* index of next byte to be processed in inbuf */
+static unsigned outcnt;		/* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+#define RESERVED     0xC0 /* bit 6,7:   reserved */
+
+#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+static int  fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+extern char input_data[];
+extern char input_data_end[];
+
+static uch *output_data;
+static ulg output_ptr;
+static ulg bytes_out;
+
+static void *malloc(int size);
+static void free(void *where);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+static void putstr(const char *);
+
+extern int end;
+static ulg free_mem_ptr;
+static ulg free_mem_ptr_end;
+
+#define HEAP_SIZE 0x2000
+
+#include "../../../../lib/inflate.c"
+
+#ifndef STANDALONE_DEBUG
+static void *malloc(int size)
+{
+	void *p;
+
+	if (size <0) error("Malloc error");
+	if (free_mem_ptr <= 0) error("Memory error");
+
+	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
+
+	p = (void *)free_mem_ptr;
+	free_mem_ptr += size;
+
+	if (free_mem_ptr >= free_mem_ptr_end)
+		error("Out of memory");
+	return p;
+}
+
+static void free(void *where)
+{ /* gzip_mark & gzip_release do the free */
+}
+
+static void gzip_mark(void **ptr)
+{
+	arch_decomp_wdog();
+	*ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+	arch_decomp_wdog();
+	free_mem_ptr = (long) *ptr;
+}
+#else
+static void gzip_mark(void **ptr)
+{
+}
+
+static void gzip_release(void **ptr)
+{
+}
+#endif
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+int fill_inbuf(void)
+{
+	if (insize != 0)
+		error("ran out of input data");
+
+	inbuf = input_data;
+	insize = &input_data_end[0] - &input_data[0];
+
+	inptr = 1;
+	return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+void flush_window(void)
+{
+	ulg c = crc;
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out++ = *in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
+	putstr(".");
+}
+
+static void error(char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System halted");
+
+	while(1);	/* Halt */
+}
+
+#ifndef STANDALONE_DEBUG
+
+ulg
+decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
+		  int arch_id)
+{
+	output_data		= (uch *)output_start;	/* Points to kernel start */
+	free_mem_ptr		= free_mem_ptr_p;
+	free_mem_ptr_end	= free_mem_ptr_end_p;
+	__machine_arch_type	= arch_id;
+
+	arch_decomp_setup();
+
+	makecrc();
+	putstr("Uncompressing Linux...");
+	gunzip();
+	putstr(" done, booting the kernel.\n");
+	return output_ptr;
+}
+#else
+
+char output_buffer[1500*1024];
+
+int main()
+{
+	output_data = output_buffer;
+
+	makecrc();
+	putstr("Uncompressing Linux...");
+	gunzip();
+	putstr("done.\n");
+	return 0;
+}
+#endif
+	
diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c
new file mode 100644
index 0000000..7f6f5db
--- /dev/null
+++ b/arch/arm/boot/compressed/ofw-shark.c
@@ -0,0 +1,260 @@
+/*
+ * linux/arch/arm/boot/compressed/ofw-shark.c
+ *
+ * by Alexander Schulz
+ *
+ * This file is used to get some basic information
+ * about the memory layout of the shark we are running
+ * on. Memory is usually divided in blocks a 8 MB.
+ * And bootargs are copied from OpenFirmware.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+
+asmlinkage void
+create_params (unsigned long *buffer)
+{
+	/* Is there a better address? Also change in mach-shark/core.c */
+	struct tag *tag = (struct tag *) 0x08003000;
+	int j,i,m,k,nr_banks,size;
+	unsigned char *c;
+
+	k = 0;
+
+	/* Head of the taglist */
+	tag->hdr.tag  = ATAG_CORE;
+	tag->hdr.size = tag_size(tag_core);
+	tag->u.core.flags = 1;
+	tag->u.core.pagesize = PAGE_SIZE;
+	tag->u.core.rootdev = 0;
+
+	/* Build up one tagged block for each memory region */
+	size=0;
+	nr_banks=(unsigned int) buffer[0];
+	for (j=0;j<nr_banks;j++){
+		/* search the lowest address and put it into the next entry   */
+		/* not a fast sort algorithm, but there are at most 8 entries */
+		/* and this is used only once anyway                          */
+		m=0xffffffff;
+		for (i=0;i<(unsigned int) buffer[0];i++){
+			if (buffer[2*i+1]<m) {
+				m=buffer[2*i+1];
+				k=i;
+			}
+		}
+	  
+		tag = tag_next(tag);
+		tag->hdr.tag = ATAG_MEM;
+		tag->hdr.size = tag_size(tag_mem32);
+		tag->u.mem.size = buffer[2*k+2];
+		tag->u.mem.start = buffer[2*k+1];
+
+		size += buffer[2*k+2];
+
+		buffer[2*k+1]=0xffffffff;                    /* mark as copied */
+	}
+	
+	/* The command line */
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_CMDLINE;
+	
+	c=(unsigned char *)(&buffer[34]);
+	j=0;
+	while (*c) tag->u.cmdline.cmdline[j++]=*c++;
+
+	tag->u.cmdline.cmdline[j]=0;
+	tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
+
+	/* Hardware revision */
+	tag = tag_next(tag);
+	tag->hdr.tag = ATAG_REVISION;
+	tag->hdr.size = tag_size(tag_revision);
+	tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
+
+	/* End of the taglist */
+	tag = tag_next(tag);
+	tag->hdr.tag = 0;
+	tag->hdr.size = 0;
+}
+
+
+typedef int (*ofw_handle_t)(void *);
+
+/* Everything below is called with a wrong MMU setting.
+ * This means: no string constants, no initialization of
+ * arrays, no global variables! This is ugly but I didn't
+ * want to write this in assembler :-)
+ */
+
+int
+of_decode_int(const unsigned char *p)
+{
+	unsigned int i = *p++ << 8;
+	i = (i + *p++) << 8;
+	i = (i + *p++) << 8;
+	return (i + *p);
+}
+  
+int
+OF_finddevice(ofw_handle_t openfirmware, char *name)
+{
+	unsigned int args[8];
+	char service[12];
+
+	service[0]='f';
+	service[1]='i';
+	service[2]='n';
+	service[3]='d';
+	service[4]='d';
+	service[5]='e';
+	service[6]='v';
+	service[7]='i';
+	service[8]='c';
+	service[9]='e';
+	service[10]='\0';
+
+	args[0]=(unsigned int)service;
+	args[1]=1;
+	args[2]=1;
+	args[3]=(unsigned int)name;
+
+	if (openfirmware(args) == -1)
+		return -1;
+	return args[4];
+}
+
+int
+OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
+{
+	unsigned int args[8];
+	char service[12];
+
+	service[0]='g';
+	service[1]='e';
+	service[2]='t';
+	service[3]='p';
+	service[4]='r';
+	service[5]='o';
+	service[6]='p';
+	service[7]='l';
+	service[8]='e';
+	service[9]='n';
+	service[10]='\0';
+
+	args[0] = (unsigned int)service;
+	args[1] = 2;
+	args[2] = 1;
+	args[3] = (unsigned int)handle;
+	args[4] = (unsigned int)prop;
+
+	if (openfirmware(args) == -1)
+		return -1;
+	return args[5];
+}
+  
+int
+OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
+{
+	unsigned int args[8];
+	char service[8];
+
+	service[0]='g';
+	service[1]='e';
+	service[2]='t';
+	service[3]='p';
+	service[4]='r';
+	service[5]='o';
+	service[6]='p';
+	service[7]='\0';
+
+	args[0] = (unsigned int)service;
+	args[1] = 4;
+	args[2] = 1;
+	args[3] = (unsigned int)handle;
+	args[4] = (unsigned int)prop;
+	args[5] = (unsigned int)buf;
+	args[6] = buflen;
+
+	if (openfirmware(args) == -1)
+		return -1;
+	return args[7];
+}
+  
+asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
+{
+	int phandle,i,mem_len,buffer[32];
+	char temp[15];
+  
+	temp[0]='/';
+	temp[1]='m';
+	temp[2]='e';
+	temp[3]='m';
+	temp[4]='o';
+	temp[5]='r';
+	temp[6]='y';
+	temp[7]='\0';
+
+	phandle=OF_finddevice(o,temp);
+
+	temp[0]='r';
+	temp[1]='e';
+	temp[2]='g';
+	temp[3]='\0';
+
+	mem_len = OF_getproplen(o,phandle, temp);
+	OF_getprop(o,phandle, temp, buffer, mem_len);
+	*nomr=mem_len >> 3;
+
+	for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
+
+	temp[0]='/';
+	temp[1]='c';
+	temp[2]='h';
+	temp[3]='o';
+	temp[4]='s';
+	temp[5]='e';
+	temp[6]='n';
+	temp[7]='\0';
+
+	phandle=OF_finddevice(o,temp);
+
+	temp[0]='b';
+	temp[1]='o';
+	temp[2]='o';
+	temp[3]='t';
+	temp[4]='a';
+	temp[5]='r';
+	temp[6]='g';
+	temp[7]='s';
+	temp[8]='\0';
+
+	mem_len = OF_getproplen(o,phandle, temp);
+	OF_getprop(o,phandle, temp, buffer, mem_len);
+	if (mem_len > 128) mem_len=128;
+	for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
+	pointer[i+33]=0;
+
+	temp[0]='/';
+	temp[1]='\0';
+	phandle=OF_finddevice(o,temp);
+	temp[0]='b';
+	temp[1]='a';
+	temp[2]='n';
+	temp[3]='n';
+	temp[4]='e';
+	temp[5]='r';
+	temp[6]='-';
+	temp[7]='n';
+	temp[8]='a';
+	temp[9]='m';
+	temp[10]='e';
+	temp[11]='\0';
+	mem_len = OF_getproplen(o,phandle, temp);
+	OF_getprop(o,phandle, temp, buffer, mem_len);
+	(unsigned char) pointer[32] = ((unsigned char *) buffer)[mem_len-2];
+}
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
new file mode 100644
index 0000000..54c9518
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.S
@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.gz"
+	.globl	input_data_end
+input_data_end:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
new file mode 100644
index 0000000..eed6161
--- /dev/null
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -0,0 +1,55 @@
+/*
+ *  linux/arch/arm/boot/compressed/vmlinux.lds.in
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+  . = TEXT_START;
+  _text = .;
+
+  .text : {
+    _start = .;
+    *(.start)
+    *(.text)
+    *(.fixup)
+    *(.gnu.warning)
+    *(.rodata)
+    *(.rodata.*)
+    *(.glue_7)
+    *(.glue_7t)
+    *(.piggydata)
+    . = ALIGN(4);
+  }
+
+  _etext = .;
+
+  _got_start = .;
+  .got			: { *(.got) }
+  _got_end = .;
+  .got.plt		: { *(.got.plt) }
+  .data			: { *(.data) }
+  _edata = .;
+
+  . = BSS_START;
+  __bss_start = .;
+  .bss			: { *(.bss) }
+  _end = .;
+
+  .stack (NOLOAD)	: { *(.stack) }
+
+  .stab 0		: { *(.stab) }
+  .stabstr 0		: { *(.stabstr) }
+  .stab.excl 0		: { *(.stab.excl) }
+  .stab.exclstr 0	: { *(.stab.exclstr) }
+  .stab.index 0		: { *(.stab.index) }
+  .stab.indexstr 0	: { *(.stab.indexstr) }
+  .comment 0		: { *(.comment) }
+}
+
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
new file mode 100644
index 0000000..935bb27
--- /dev/null
+++ b/arch/arm/boot/install.sh
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# arch/arm/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for arm architecture
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+# User may have a custom install script
+if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
+if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+
+if [ "$(basename $2)" = "zImage" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
+
+if [ -x /sbin/loadmap ]; then
+  /sbin/loadmap
+else
+  echo "You have to install it yourself"
+fi