Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/arm/mach-epxa10db/Kconfig b/arch/arm/mach-epxa10db/Kconfig
new file mode 100644
index 0000000..55d896d
--- /dev/null
+++ b/arch/arm/mach-epxa10db/Kconfig
@@ -0,0 +1,23 @@
+if ARCH_CAMELOT
+
+menu "Epxa10db"
+
+comment "PLD hotswap support"
+
+config PLD
+ bool
+ default y
+
+config PLD_HOTSWAP
+ bool "Support for PLD device hotplugging (experimental)"
+ depends on EXPERIMENTAL
+ help
+ This enables support for the dynamic loading and configuration of
+ compatible drivers when the contents of the PLD are changed. This
+ is still experimental and requires configuration tools which are
+ not yet generally available. Say N here. You must enable the kernel
+ module loader for this feature to work.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-epxa10db/Makefile b/arch/arm/mach-epxa10db/Makefile
new file mode 100644
index 0000000..24fbd7d
--- /dev/null
+++ b/arch/arm/mach-epxa10db/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o irq.o mm.o time.o
+obj-m :=
+obj-n :=
+obj- :=
+
diff --git a/arch/arm/mach-epxa10db/Makefile.boot b/arch/arm/mach-epxa10db/Makefile.boot
new file mode 100644
index 0000000..28bec7d
--- /dev/null
+++ b/arch/arm/mach-epxa10db/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x00008000
+
diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c
new file mode 100644
index 0000000..1b40340
--- /dev/null
+++ b/arch/arm/mach-epxa10db/arch.c
@@ -0,0 +1,72 @@
+/*
+ * linux/arch/arm/mach-epxa10db/arch.c
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .iobase = 0x3f8,
+ .irq = IRQ_UARTINT0,
+#error FIXME
+ .uartclk = 0,
+ .regshift = 0,
+ .iotype = UPIO_PORT,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ },
+ {
+ .iobase = 0x2f8,
+ .irq = IRQ_UARTINT1,
+#error FIXME
+ .uartclk = 0,
+ .regshift = 0,
+ .iotype = UPIO_PORT,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ },
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+extern void epxa10db_map_io(void);
+extern void epxa10db_init_irq(void);
+extern struct sys_timer epxa10db_timer;
+
+MACHINE_START(CAMELOT, "Altera Epxa10db")
+ MAINTAINER("Altera Corporation")
+ BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000)
+ MAPIO(epxa10db_map_io)
+ INITIRQ(epxa10db_init_irq)
+ .timer = &epxa10db_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-epxa10db/dma.c b/arch/arm/mach-epxa10db/dma.c
new file mode 100644
index 0000000..0151e9f
--- /dev/null
+++ b/arch/arm/mach-epxa10db/dma.c
@@ -0,0 +1,28 @@
+/*
+ * linux/arch/arm/mach-epxa10db/dma.c
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+
+#include <asm/dma.h>
+#include <asm/mach/dma.h>
+
+void __init arch_dma_init(dma_t *dma)
+{
+}
diff --git a/arch/arm/mach-epxa10db/irq.c b/arch/arm/mach-epxa10db/irq.c
new file mode 100644
index 0000000..9bf927e
--- /dev/null
+++ b/arch/arm/mach-epxa10db/irq.c
@@ -0,0 +1,82 @@
+/*
+ * linux/arch/arm/mach-epxa10db/irq.c
+ *
+ * Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/stddef.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/int_ctrl00.h>
+
+
+static void epxa_mask_irq(unsigned int irq)
+{
+ writel(1 << irq, INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
+}
+
+static void epxa_unmask_irq(unsigned int irq)
+{
+ writel(1 << irq, INT_MS(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
+}
+
+
+static struct irqchip epxa_irq_chip = {
+ .ack = epxa_mask_irq,
+ .mask = epxa_mask_irq,
+ .unmask = epxa_unmask_irq,
+};
+
+static struct resource irq_resource = {
+ .name = "irq_handler",
+ .start = IO_ADDRESS(EXC_INT_CTRL00_BASE),
+ .end = IO_ADDRESS(INT_PRIORITY_FC(EXC_INT_CTRL00_BASE))+4,
+};
+
+void __init epxa10db_init_irq(void)
+{
+ unsigned int i;
+
+ request_resource(&iomem_resource, &irq_resource);
+
+ /*
+ * This bit sets up the interrupt controller using
+ * the 6 PLD interrupts mode (the default) each
+ * irqs is assigned a priority which is the same
+ * as its interrupt number. This scheme is used because
+ * its easy, but you may want to change it depending
+ * on the contents of your PLD
+ */
+
+ writel(3,INT_MODE(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
+ for (i = 0; i < NR_IRQS; i++){
+ writel(i+1, INT_PRIORITY_P0(IO_ADDRESS(EXC_INT_CTRL00_BASE)) + (4*i));
+ set_irq_chip(i,&epxa_irq_chip);
+ set_irq_handler(i,do_level_IRQ);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Disable all interrupts */
+ writel(-1,INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
+
+}
diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c
new file mode 100644
index 0000000..2aa57fa
--- /dev/null
+++ b/arch/arm/mach-epxa10db/mm.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-epxa10db/mm.c
+ *
+ * MM routines for Altera'a Epxa10db board
+ *
+ * Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/map.h>
+
+/* Page table mapping for I/O region */
+
+static struct map_desc epxa10db_io_desc[] __initdata = {
+ { IO_ADDRESS(EXC_REGISTERS_BASE), EXC_REGISTERS_BASE, SZ_16K, MT_DEVICE },
+ { IO_ADDRESS(EXC_PLD_BLOCK0_BASE), EXC_PLD_BLOCK0_BASE, SZ_16K, MT_DEVICE },
+ { IO_ADDRESS(EXC_PLD_BLOCK1_BASE), EXC_PLD_BLOCK1_BASE, SZ_16K, MT_DEVICE },
+ { IO_ADDRESS(EXC_PLD_BLOCK2_BASE), EXC_PLD_BLOCK2_BASE, SZ_16K, MT_DEVICE },
+ { IO_ADDRESS(EXC_PLD_BLOCK3_BASE), EXC_PLD_BLOCK3_BASE, SZ_16K, MT_DEVICE },
+ { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE, SZ_16M, MT_DEVICE }
+};
+
+void __init epxa10db_map_io(void)
+{
+ iotable_init(epxa10db_io_desc, ARRAY_SIZE(epxa10db_io_desc));
+}
diff --git a/arch/arm/mach-epxa10db/time.c b/arch/arm/mach-epxa10db/time.c
new file mode 100644
index 0000000..1b991f3
--- /dev/null
+++ b/arch/arm/mach-epxa10db/time.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/arm/mach-epxa10db/time.c
+ *
+ * Copyright (C) 2000 Deep Blue Solutions
+ * Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/leds.h>
+
+#include <asm/mach/time.h>
+
+#define TIMER00_TYPE (volatile unsigned int*)
+#include <asm/arch/timer00.h>
+
+static int epxa10db_set_rtc(void)
+{
+ return 1;
+}
+
+static int epxa10db_rtc_init(void)
+{
+ set_rtc = epxa10db_set_rtc;
+
+ return 0;
+}
+
+__initcall(epxa10db_rtc_init);
+
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ write_seqlock(&xtime_lock);
+
+ // ...clear the interrupt
+ *TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))|=TIMER0_CR_CI_MSK;
+
+ timer_tick(regs);
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction epxa10db_timer_irq = {
+ .name = "Excalibur Timer Tick",
+ .flags = SA_INTERRUPT,
+ .handler = epxa10db_timer_interrupt
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init epxa10db_timer_init(void)
+{
+ /* Start the timer */
+ *TIMER0_LIMIT(IO_ADDRESS(EXC_TIMER00_BASE))=(unsigned int)(EXC_AHB2_CLK_FREQUENCY/200);
+ *TIMER0_PRESCALE(IO_ADDRESS(EXC_TIMER00_BASE))=1;
+ *TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))=TIMER0_CR_IE_MSK | TIMER0_CR_S_MSK;
+
+ setup_irq(IRQ_TIMER0, &epxa10db_timer_irq);
+}
+
+struct sys_timer epxa10db_timer = {
+ .init = epxa10db_timer_init,
+};