Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
new file mode 100644
index 0000000..c095de8
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -0,0 +1,944 @@
+/* $Id: gpio.c,v 1.12 2004/08/24 07:19:59 starvik Exp $
+ *
+ * Etrax general port I/O device
+ *
+ * Copyright (c) 1999, 2000, 2001, 2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (initial version)
+ * Ola Knutsson (LED handling)
+ * Johan Adolfsson (read/set directions, write, port G)
+ *
+ * $Log: gpio.c,v $
+ * Revision 1.12 2004/08/24 07:19:59 starvik
+ * Whitespace cleanup
+ *
+ * Revision 1.11 2004/05/14 07:58:03 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.9 2003/09/11 07:29:48 starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.8 2003/07/04 08:27:37 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.7 2003/01/10 07:44:07 starvik
+ * init_ioremap is now called by kernel before drivers are initialized
+ *
+ * Revision 1.6 2002/12/11 13:13:57 starvik
+ * Added arch/ to v10 specific includes
+ * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+ *
+ * Revision 1.5 2002/11/20 11:56:11 starvik
+ * Merge of Linux 2.5.48
+ *
+ * Revision 1.4 2002/11/18 10:10:05 starvik
+ * Linux 2.5 port of latest gpio.c from Linux 2.4
+ *
+ * Revision 1.20 2002/10/16 21:16:24 johana
+ * Added support for PA high level interrupt.
+ * That gives 2ms response time with iodtest for high levels and 2-12 ms
+ * response time on low levels if the check is not made in
+ * process.c:cpu_idle() as well.
+ *
+ * Revision 1.19 2002/10/14 18:27:33 johana
+ * Implemented alarm handling so select() now works.
+ * Latency is around 6-9 ms with a etrax_gpio_wake_up_check() in
+ * cpu_idle().
+ * Otherwise I get 15-18 ms (same as doing the poll in userspace -
+ * but less overhead).
+ * TODO? Perhaps we should add the check in IMMEDIATE_BH (or whatever it
+ * is in 2.4) as well?
+ * TODO? Perhaps call request_irq()/free_irq() only when needed?
+ * Increased version to 2.5
+ *
+ * Revision 1.18 2002/10/11 15:02:00 johana
+ * Mask inverted 8 bit value in setget_input().
+ *
+ * Revision 1.17 2002/06/17 15:53:01 johana
+ * Added IO_READ_INBITS, IO_READ_OUTBITS, IO_SETGET_INPUT and IO_SETGET_OUTPUT
+ * that take a pointer as argument and thus can handle 32 bit ports (G)
+ * correctly.
+ * These should be used instead of IO_READBITS, IO_SETINPUT and IO_SETOUTPUT.
+ * (especially if Port G bit 31 is used)
+ *
+ * Revision 1.16 2002/06/17 09:59:51 johana
+ * Returning 32 bit values in the ioctl return value doesn't work if bit
+ * 31 is set (could happen for port G), so mask it of with 0x7FFFFFFF.
+ * A new set of ioctl's will be added.
+ *
+ * Revision 1.15 2002/05/06 13:19:13 johana
+ * IO_SETINPUT returns mask with bit set = inputs for PA and PB as well.
+ *
+ * Revision 1.14 2002/04/12 12:01:53 johana
+ * Use global r_port_g_data_shadow.
+ * Moved gpio_init_port_g() closer to gpio_init() and marked it __init.
+ *
+ * Revision 1.13 2002/04/10 12:03:55 johana
+ * Added support for port G /dev/gpiog (minor 3).
+ * Changed indentation on switch cases.
+ * Fixed other spaces to tabs.
+ *
+ * Revision 1.12 2001/11/12 19:42:15 pkj
+ * * Corrected return values from gpio_leds_ioctl().
+ * * Fixed compiler warnings.
+ *
+ * Revision 1.11 2001/10/30 14:39:12 johana
+ * Added D() around gpio_write printk.
+ *
+ * Revision 1.10 2001/10/25 10:24:42 johana
+ * Added IO_CFG_WRITE_MODE ioctl and write method that can do fast
+ * bittoggling in the kernel. (This speeds up programming an FPGA with 450kB
+ * from ~60 seconds to 4 seconds).
+ * Added save_flags/cli/restore_flags in ioctl.
+ *
+ * Revision 1.9 2001/05/04 14:16:07 matsfg
+ * Corrected spelling error
+ *
+ * Revision 1.8 2001/04/27 13:55:26 matsfg
+ * Moved initioremap.
+ * Turns off all LEDS on init.
+ * Added support for shutdown and powerbutton.
+ *
+ * Revision 1.7 2001/04/04 13:30:08 matsfg
+ * Added bitset and bitclear for leds. Calls init_ioremap to set up memmapping
+ *
+ * Revision 1.6 2001/03/26 16:03:06 bjornw
+ * Needs linux/config.h
+ *
+ * Revision 1.5 2001/03/26 14:22:03 bjornw
+ * Namechange of some config options
+ *
+ * Revision 1.4 2001/02/27 13:52:48 bjornw
+ * malloc.h -> slab.h
+ *
+ * Revision 1.3 2001/01/24 15:06:48 bjornw
+ * gpio_wq correct type
+ *
+ * Revision 1.2 2001/01/18 16:07:30 bjornw
+ * 2.4 port
+ *
+ * Revision 1.1 2001/01/18 15:55:16 bjornw
+ * Verbatim copy of etraxgpio.c from elinux 2.0 added
+ *
+ *
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <asm/etraxgpio.h>
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+#define GPIO_MAJOR 120 /* experimental MAJOR number */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#if 0
+static wait_queue_head_t *gpio_wq;
+#endif
+
+static int gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+ loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+ struct gpio_private *next;
+ /* These fields are for PA and PB only */
+ volatile unsigned char *port, *shadow;
+ volatile unsigned char *dir, *dir_shadow;
+ unsigned char changeable_dir;
+ unsigned char changeable_bits;
+ unsigned char clk_mask;
+ unsigned char data_mask;
+ unsigned char write_msb;
+ unsigned char pad1, pad2, pad3;
+ /* These fields are generic */
+ unsigned long highalarm, lowalarm;
+ wait_queue_head_t alarm_wq;
+ int minor;
+};
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist = 0;
+
+static int gpio_some_alarms = 0; /* Set if someone uses alarm */
+static unsigned long gpio_pa_irq_enabled_mask = 0;
+
+/* Port A and B use 8 bit access, but Port G is 32 bit */
+#define NUM_PORTS (GPIO_MINOR_B+1)
+
+static volatile unsigned char *ports[NUM_PORTS] = {
+ R_PORT_PA_DATA,
+ R_PORT_PB_DATA,
+};
+static volatile unsigned char *shads[NUM_PORTS] = {
+ &port_pa_data_shadow,
+ &port_pb_data_shadow
+};
+
+/* What direction bits that are user changeable 1=changeable*/
+#ifndef CONFIG_ETRAX_PA_CHANGEABLE_DIR
+#define CONFIG_ETRAX_PA_CHANGEABLE_DIR 0x00
+#endif
+#ifndef CONFIG_ETRAX_PB_CHANGEABLE_DIR
+#define CONFIG_ETRAX_PB_CHANGEABLE_DIR 0x00
+#endif
+
+#ifndef CONFIG_ETRAX_PA_CHANGEABLE_BITS
+#define CONFIG_ETRAX_PA_CHANGEABLE_BITS 0xFF
+#endif
+#ifndef CONFIG_ETRAX_PB_CHANGEABLE_BITS
+#define CONFIG_ETRAX_PB_CHANGEABLE_BITS 0xFF
+#endif
+
+
+static unsigned char changeable_dir[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+ CONFIG_ETRAX_PB_CHANGEABLE_DIR
+};
+static unsigned char changeable_bits[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+ CONFIG_ETRAX_PB_CHANGEABLE_BITS
+};
+
+static volatile unsigned char *dir[NUM_PORTS] = {
+ R_PORT_PA_DIR,
+ R_PORT_PB_DIR
+};
+
+static volatile unsigned char *dir_shadow[NUM_PORTS] = {
+ &port_pa_dir_shadow,
+ &port_pb_dir_shadow
+};
+
+/* Port G is 32 bit, handle it special, some bits are both inputs
+ and outputs at the same time, only some of the bits can change direction
+ and some of them in groups of 8 bit. */
+static unsigned long changeable_dir_g;
+static unsigned long dir_g_in_bits;
+static unsigned long dir_g_out_bits;
+static unsigned long dir_g_shadow; /* 1=output */
+
+#define USE_PORTS(priv) ((priv)->minor <= GPIO_MINOR_B)
+
+
+
+static unsigned int
+gpio_poll(struct file *file,
+ poll_table *wait)
+{
+ unsigned int mask = 0;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned long data;
+ poll_wait(file, &priv->alarm_wq, wait);
+ if (priv->minor == GPIO_MINOR_A) {
+ unsigned long flags;
+ unsigned long tmp;
+ data = *R_PORT_PA_DATA;
+ /* PA has support for high level interrupt -
+ * lets activate for those low and with highalarm set
+ */
+ tmp = ~data & priv->highalarm & 0xFF;
+ tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR);
+ save_flags(flags); cli();
+ gpio_pa_irq_enabled_mask |= tmp;
+ *R_IRQ_MASK1_SET = tmp;
+ restore_flags(flags);
+
+ } else if (priv->minor == GPIO_MINOR_B)
+ data = *R_PORT_PB_DATA;
+ else if (priv->minor == GPIO_MINOR_G)
+ data = *R_PORT_G_DATA;
+ else
+ return 0;
+
+ if ((data & priv->highalarm) ||
+ (~data & priv->lowalarm)) {
+ mask = POLLIN|POLLRDNORM;
+ }
+
+ DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+ return mask;
+}
+
+int etrax_gpio_wake_up_check(void)
+{
+ struct gpio_private *priv = alarmlist;
+ unsigned long data = 0;
+ int ret = 0;
+ while (priv) {
+ if (USE_PORTS(priv)) {
+ data = *priv->port;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ data = *R_PORT_G_DATA;
+ }
+ if ((data & priv->highalarm) ||
+ (~data & priv->lowalarm)) {
+ DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor));
+ wake_up_interruptible(&priv->alarm_wq);
+ ret = 1;
+ }
+ priv = priv->next;
+ }
+ return ret;
+}
+
+static irqreturn_t
+gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ if (gpio_some_alarms) {
+ etrax_gpio_wake_up_check();
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static irqreturn_t
+gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long tmp;
+ /* Find what PA interrupts are active */
+ tmp = (*R_IRQ_READ1);
+
+ /* Find those that we have enabled */
+ tmp &= gpio_pa_irq_enabled_mask;
+
+ /* Clear them.. */
+ *R_IRQ_MASK1_CLR = tmp;
+ gpio_pa_irq_enabled_mask &= ~tmp;
+
+ if (gpio_some_alarms) {
+ return IRQ_RETVAL(etrax_gpio_wake_up_check());
+ }
+ return IRQ_NONE;
+}
+
+
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+ loff_t *off)
+{
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned char data, clk_mask, data_mask, write_msb;
+ unsigned long flags;
+ ssize_t retval = count;
+ if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
+ return -EFAULT;
+ }
+
+ if (!access_ok(VERIFY_READ, buf, count)) {
+ return -EFAULT;
+ }
+ clk_mask = priv->clk_mask;
+ data_mask = priv->data_mask;
+ /* It must have been configured using the IO_CFG_WRITE_MODE */
+ /* Perhaps a better error code? */
+ if (clk_mask == 0 || data_mask == 0) {
+ return -EPERM;
+ }
+ write_msb = priv->write_msb;
+ D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
+ while (count--) {
+ int i;
+ data = *buf++;
+ if (priv->write_msb) {
+ for (i = 7; i >= 0;i--) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->port = *priv->shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *priv->port = *priv->shadow |= data_mask;
+ else
+ *priv->port = *priv->shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *priv->port = *priv->shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ } else {
+ for (i = 0; i <= 7;i++) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->port = *priv->shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *priv->port = *priv->shadow |= data_mask;
+ else
+ *priv->port = *priv->shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *priv->port = *priv->shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ }
+ }
+ return retval;
+}
+
+
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *priv;
+ int p = MINOR(inode->i_rdev);
+
+ if (p > GPIO_MINOR_LAST)
+ return -EINVAL;
+
+ priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
+ GFP_KERNEL);
+
+ if (!priv)
+ return -ENOMEM;
+
+ priv->minor = p;
+
+ /* initialize the io/alarm struct and link it into our alarmlist */
+
+ priv->next = alarmlist;
+ alarmlist = priv;
+ if (USE_PORTS(priv)) { /* A and B */
+ priv->port = ports[p];
+ priv->shadow = shads[p];
+ priv->dir = dir[p];
+ priv->dir_shadow = dir_shadow[p];
+ priv->changeable_dir = changeable_dir[p];
+ priv->changeable_bits = changeable_bits[p];
+ } else {
+ priv->port = NULL;
+ priv->shadow = NULL;
+ priv->dir = NULL;
+ priv->dir_shadow = NULL;
+ priv->changeable_dir = 0;
+ priv->changeable_bits = 0;
+ }
+
+ priv->highalarm = 0;
+ priv->lowalarm = 0;
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ init_waitqueue_head(&priv->alarm_wq);
+
+ filp->private_data = (void *)priv;
+
+ return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *p = alarmlist;
+ struct gpio_private *todel = (struct gpio_private *)filp->private_data;
+
+ /* unlink from alarmlist and free the private structure */
+
+ if (p == todel) {
+ alarmlist = todel->next;
+ } else {
+ while (p->next != todel)
+ p = p->next;
+ p->next = todel->next;
+ }
+
+ kfree(todel);
+ /* Check if there are still any alarms set */
+ p = alarmlist;
+ while (p) {
+ if (p->highalarm | p->lowalarm) {
+ gpio_some_alarms = 1;
+ return 0;
+ }
+ p = p->next;
+ }
+ gpio_some_alarms = 0;
+
+ return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
+{
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ unsigned long flags;
+ if (USE_PORTS(priv)) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->dir = *priv->dir_shadow &=
+ ~((unsigned char)arg & priv->changeable_dir);
+ local_irq_restore(flags);
+ return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */
+ } else if (priv->minor == GPIO_MINOR_G) {
+ /* We must fiddle with R_GEN_CONFIG to change dir */
+ save_flags(flags); cli();
+ if (((arg & dir_g_in_bits) != arg) &&
+ (arg & changeable_dir_g)) {
+ arg &= changeable_dir_g;
+ /* Clear bits in genconfig to set to input */
+ if (arg & (1<<0)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g0dir);
+ dir_g_in_bits |= (1<<0);
+ dir_g_out_bits &= ~(1<<0);
+ }
+ if ((arg & 0x0000FF00) == 0x0000FF00) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir);
+ dir_g_in_bits |= 0x0000FF00;
+ dir_g_out_bits &= ~0x0000FF00;
+ }
+ if ((arg & 0x00FF0000) == 0x00FF0000) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir);
+ dir_g_in_bits |= 0x00FF0000;
+ dir_g_out_bits &= ~0x00FF0000;
+ }
+ if (arg & (1<<24)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g24dir);
+ dir_g_in_bits |= (1<<24);
+ dir_g_out_bits &= ~(1<<24);
+ }
+ D(printk(KERN_INFO "gpio: SETINPUT on port G set "
+ "genconfig to 0x%08lX "
+ "in_bits: 0x%08lX "
+ "out_bits: 0x%08lX\n",
+ (unsigned long)genconfig_shadow,
+ dir_g_in_bits, dir_g_out_bits));
+ *R_GEN_CONFIG = genconfig_shadow;
+ /* Must be a >120 ns delay before writing this again */
+
+ }
+ restore_flags(flags);
+ return dir_g_in_bits;
+ }
+ return 0;
+} /* setget_input */
+
+unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
+{
+ unsigned long flags;
+ if (USE_PORTS(priv)) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->dir = *priv->dir_shadow |=
+ ((unsigned char)arg & priv->changeable_dir);
+ local_irq_restore(flags);
+ return *priv->dir_shadow;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ /* We must fiddle with R_GEN_CONFIG to change dir */
+ save_flags(flags); cli();
+ if (((arg & dir_g_out_bits) != arg) &&
+ (arg & changeable_dir_g)) {
+ /* Set bits in genconfig to set to output */
+ if (arg & (1<<0)) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g0dir);
+ dir_g_out_bits |= (1<<0);
+ dir_g_in_bits &= ~(1<<0);
+ }
+ if ((arg & 0x0000FF00) == 0x0000FF00) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
+ dir_g_out_bits |= 0x0000FF00;
+ dir_g_in_bits &= ~0x0000FF00;
+ }
+ if ((arg & 0x00FF0000) == 0x00FF0000) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
+ dir_g_out_bits |= 0x00FF0000;
+ dir_g_in_bits &= ~0x00FF0000;
+ }
+ if (arg & (1<<24)) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g24dir);
+ dir_g_out_bits |= (1<<24);
+ dir_g_in_bits &= ~(1<<24);
+ }
+ D(printk(KERN_INFO "gpio: SETOUTPUT on port G set "
+ "genconfig to 0x%08lX "
+ "in_bits: 0x%08lX "
+ "out_bits: 0x%08lX\n",
+ (unsigned long)genconfig_shadow,
+ dir_g_in_bits, dir_g_out_bits));
+ *R_GEN_CONFIG = genconfig_shadow;
+ /* Must be a >120 ns delay before writing this again */
+ }
+ restore_flags(flags);
+ return dir_g_out_bits & 0x7FFFFFFF;
+ }
+ return 0;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ unsigned long val;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
+ return -EINVAL;
+ }
+
+ switch (_IOC_NR(cmd)) {
+ case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+ // read the port
+ if (USE_PORTS(priv)) {
+ return *priv->port;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ return (*R_PORT_G_DATA) & 0x7FFFFFFF;
+ }
+ break;
+ case IO_SETBITS:
+ local_irq_save(flags); local_irq_disable();
+ // set changeable bits with a 1 in arg
+ if (USE_PORTS(priv)) {
+ *priv->port = *priv->shadow |=
+ ((unsigned char)arg & priv->changeable_bits);
+ } else if (priv->minor == GPIO_MINOR_G) {
+ *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits);
+ }
+ local_irq_restore(flags);
+ break;
+ case IO_CLRBITS:
+ local_irq_save(flags); local_irq_disable();
+ // clear changeable bits with a 1 in arg
+ if (USE_PORTS(priv)) {
+ *priv->port = *priv->shadow &=
+ ~((unsigned char)arg & priv->changeable_bits);
+ } else if (priv->minor == GPIO_MINOR_G) {
+ *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits);
+ }
+ local_irq_restore(flags);
+ break;
+ case IO_HIGHALARM:
+ // set alarm when bits with 1 in arg go high
+ priv->highalarm |= arg;
+ gpio_some_alarms = 1;
+ break;
+ case IO_LOWALARM:
+ // set alarm when bits with 1 in arg go low
+ priv->lowalarm |= arg;
+ gpio_some_alarms = 1;
+ break;
+ case IO_CLRALARM:
+ // clear alarm for bits with 1 in arg
+ priv->highalarm &= ~arg;
+ priv->lowalarm &= ~arg;
+ {
+ /* Must update gpio_some_alarms */
+ struct gpio_private *p = alarmlist;
+ int some_alarms;
+ some_alarms = 0;
+ while (p) {
+ if (p->highalarm | p->lowalarm) {
+ some_alarms = 1;
+ break;
+ }
+ p = p->next;
+ }
+ gpio_some_alarms = some_alarms;
+ }
+ break;
+ case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+ /* Read direction 0=input 1=output */
+ if (USE_PORTS(priv)) {
+ return *priv->dir_shadow;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ /* Note: Some bits are both in and out,
+ * Those that are dual is set here as well.
+ */
+ return (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
+ }
+ case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ return setget_input(priv, arg) & 0x7FFFFFFF;
+ break;
+ case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+ /* Set direction 0=unchanged 1=output,
+ * return mask with 1=output
+ */
+ return setget_output(priv, arg) & 0x7FFFFFFF;
+
+ case IO_SHUTDOWN:
+ SOFT_SHUTDOWN();
+ break;
+ case IO_GET_PWR_BT:
+#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
+ return (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
+#else
+ return 0;
+#endif
+ break;
+ case IO_CFG_WRITE_MODE:
+ priv->clk_mask = arg & 0xFF;
+ priv->data_mask = (arg >> 8) & 0xFF;
+ priv->write_msb = (arg >> 16) & 0x01;
+ /* Check if we're allowed to change the bits and
+ * the direction is correct
+ */
+ if (!((priv->clk_mask & priv->changeable_bits) &&
+ (priv->data_mask & priv->changeable_bits) &&
+ (priv->clk_mask & *priv->dir_shadow) &&
+ (priv->data_mask & *priv->dir_shadow)))
+ {
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ return -EPERM;
+ }
+ break;
+ case IO_READ_INBITS:
+ /* *arg is result of reading the input pins */
+ if (USE_PORTS(priv)) {
+ val = *priv->port;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ val = *R_PORT_G_DATA;
+ }
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ return 0;
+ break;
+ case IO_READ_OUTBITS:
+ /* *arg is result of reading the output shadow */
+ if (USE_PORTS(priv)) {
+ val = *priv->shadow;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ val = port_g_data_shadow;
+ }
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_INPUT:
+ /* bits set in *arg is set to input,
+ * *arg updated with current input pins.
+ */
+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_input(priv, val);
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_OUTPUT:
+ /* bits set in *arg is set to output,
+ * *arg updated with current output pins.
+ */
+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_output(priv, val);
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ default:
+ if (priv->minor == GPIO_MINOR_LEDS)
+ return gpio_leds_ioctl(cmd, arg);
+ else
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+ unsigned char green;
+ unsigned char red;
+
+ switch (_IOC_NR(cmd)) {
+ case IO_LEDACTIVE_SET:
+ green = ((unsigned char) arg) & 1;
+ red = (((unsigned char) arg) >> 1) & 1;
+ LED_ACTIVE_SET_G(green);
+ LED_ACTIVE_SET_R(red);
+ break;
+
+ case IO_LED_SETBIT:
+ LED_BIT_SET(arg);
+ break;
+
+ case IO_LED_CLRBIT:
+ LED_BIT_CLR(arg);
+ break;
+
+ default:
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+struct file_operations gpio_fops = {
+ .owner = THIS_MODULE,
+ .poll = gpio_poll,
+ .ioctl = gpio_ioctl,
+ .write = gpio_write,
+ .open = gpio_open,
+ .release = gpio_release,
+};
+
+
+static void __init gpio_init_port_g(void)
+{
+#define GROUPA (0x0000FF3F)
+#define GROUPB (1<<6 | 1<<7)
+#define GROUPC (1<<30 | 1<<31)
+#define GROUPD (0x3FFF0000)
+#define GROUPD_LOW (0x00FF0000)
+ unsigned long used_in_bits = 0;
+ unsigned long used_out_bits = 0;
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0, select)){
+ used_in_bits |= GROUPA | GROUPB | 0 | 0;
+ used_out_bits |= GROUPA | GROUPB | 0 | 0;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ata, select)) {
+ used_in_bits |= GROUPA | GROUPB | GROUPC | (GROUPD & ~(1<<25|1<<26));
+ used_out_bits |= GROUPA | GROUPB | GROUPC | GROUPD;
+ }
+
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par0, select)) {
+ used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
+ used_out_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser2, select)) {
+ used_in_bits |= 0 | GROUPB | 0 | 0;
+ used_out_bits |= 0 | GROUPB | 0 | 0;
+ }
+ /* mio same as shared RAM ? */
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio, select)) {
+ used_in_bits |= (GROUPA & ~(1<<0)) | 0 |0 |GROUPD_LOW;
+ used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 |0 |GROUPD_LOW;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi1, select)) {
+ used_in_bits |= 0 | 0 | GROUPC | GROUPD;
+ used_out_bits |= 0 | 0 | GROUPC | GROUPD;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0w, select)) {
+ used_in_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24);
+ used_out_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24 | 1<<25|1<<26);
+ }
+
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par1, select)) {
+ used_in_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
+ used_out_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser3, select)) {
+ used_in_bits |= 0 | 0 | GROUPC | 0;
+ used_out_bits |= 0 | 0 | GROUPC | 0;
+ }
+ /* mio same as shared RAM-W? */
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio_w, select)) {
+ used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 |GROUPD_LOW;
+ used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 | 0 |GROUPD_LOW;
+ }
+ /* TODO: USB p2, parw, sync ser3? */
+
+ /* Initialise the dir_g_shadow etc. depending on genconfig */
+ /* 0=input 1=output */
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out))
+ dir_g_shadow |= (1 << 0);
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g8_15dir, out))
+ dir_g_shadow |= 0x0000FF00;
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g16_23dir, out))
+ dir_g_shadow |= 0x00FF0000;
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out))
+ dir_g_shadow |= (1 << 24);
+
+ dir_g_in_bits = ~used_in_bits;
+ dir_g_out_bits = ~used_out_bits;
+
+ changeable_dir_g = 0x01FFFF01; /* all that can change dir */
+ changeable_dir_g &= dir_g_out_bits;
+ changeable_dir_g &= dir_g_in_bits;
+ /* Correct the bits that can change direction */
+ dir_g_out_bits &= ~changeable_dir_g;
+ dir_g_out_bits |= dir_g_shadow;
+ dir_g_in_bits &= ~changeable_dir_g;
+ dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g);
+
+
+ printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n",
+ dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA);
+ printk(KERN_INFO "GPIO port G: dir: %08lX changeable: %08lX\n",
+ dir_g_shadow, changeable_dir_g);
+}
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+ int res;
+#if defined (CONFIG_ETRAX_CSP0_LEDS)
+ int i;
+#endif
+
+ /* do the formalities */
+
+ res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+ if (res < 0) {
+ printk(KERN_ERR "gpio: couldn't get a major number.\n");
+ return res;
+ }
+
+ /* Clear all leds */
+#if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
+ LED_NETWORK_SET(0);
+ LED_ACTIVE_SET(0);
+ LED_DISK_READ(0);
+ LED_DISK_WRITE(0);
+
+#if defined (CONFIG_ETRAX_CSP0_LEDS)
+ for (i = 0; i < 32; i++) {
+ LED_BIT_SET(i);
+ }
+#endif
+
+#endif
+ gpio_init_port_g();
+ printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB\n");
+ /* We call etrax_gpio_wake_up_check() from timer interrupt and
+ * from cpu_idle() in kernel/process.c
+ * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
+ * in some tests.
+ */
+ if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt,
+ SA_SHIRQ | SA_INTERRUPT,"gpio poll", NULL)) {
+ printk(KERN_CRIT "err: timer0 irq for gpio\n");
+ }
+ if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt,
+ SA_SHIRQ | SA_INTERRUPT,"gpio PA", NULL)) {
+ printk(KERN_CRIT "err: PA irq for gpio\n");
+ }
+
+
+ return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);