Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S
new file mode 100644
index 0000000..4ccf841
--- /dev/null
+++ b/arch/frv/kernel/head-uc-fr401.S
@@ -0,0 +1,311 @@
+/* head-uc-fr401.S: FR401/3/5 uc-linux specific bits of initialisation
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+#include <asm/spr-regs.h>
+#include <asm/mb86943a.h>
+#include "head.inc"
+
+
+#define __400_DBR0 0xfe000e00
+#define __400_DBR1 0xfe000e08
+#define __400_DBR2 0xfe000e10 /* not on FR401 */
+#define __400_DBR3 0xfe000e18 /* not on FR401 */
+#define __400_DAM0 0xfe000f00
+#define __400_DAM1 0xfe000f08
+#define __400_DAM2 0xfe000f10 /* not on FR401 */
+#define __400_DAM3 0xfe000f18 /* not on FR401 */
+#define __400_LGCR 0xfe000010
+#define __400_LCR 0xfe000100
+#define __400_LSBR 0xfe000c00
+
+ .section .text.init,"ax"
+ .balign 4
+
+###############################################################################
+#
+# describe the position and layout of the SDRAM controller registers
+#
+# ENTRY: EXIT:
+# GR5 - cacheline size
+# GR11 - displacement of 2nd SDRAM addr reg from GR14
+# GR12 - displacement of 3rd SDRAM addr reg from GR14
+# GR13 - displacement of 4th SDRAM addr reg from GR14
+# GR14 - address of 1st SDRAM addr reg
+# GR15 - amount to shift address by to match SDRAM addr reg
+# GR26 &__head_reference [saved]
+# GR30 LED address [saved]
+# CC0 - T if DBR0 is present
+# CC1 - T if DBR1 is present
+# CC2 - T if DBR2 is present (not FR401/FR401A)
+# CC3 - T if DBR3 is present (not FR401/FR401A)
+#
+###############################################################################
+ .globl __head_fr401_describe_sdram
+__head_fr401_describe_sdram:
+ sethi.p %hi(__400_DBR0),gr14
+ setlo %lo(__400_DBR0),gr14
+ setlos.p #__400_DBR1-__400_DBR0,gr11
+ setlos #__400_DBR2-__400_DBR0,gr12
+ setlos.p #__400_DBR3-__400_DBR0,gr13
+ setlos #32,gr5 ; cacheline size
+ setlos.p #0,gr15 ; amount to shift addr reg by
+
+ # specify which DBR regs are present
+ setlos #0x00ff,gr4
+ movgs gr4,cccr
+ movsg psr,gr3 ; check for FR401/FR401A
+ srli gr3,#25,gr3
+ subicc gr3,#0x20>>1,gr0,icc0
+ bnelr icc0,#1
+ setlos #0x000f,gr4
+ movgs gr4,cccr
+ bralr
+
+###############################################################################
+#
+# rearrange the bus controller registers
+#
+# ENTRY: EXIT:
+# GR26 &__head_reference [saved]
+# GR30 LED address revised LED address
+#
+###############################################################################
+ .globl __head_fr401_set_busctl
+__head_fr401_set_busctl:
+ sethi.p %hi(__400_LGCR),gr4
+ setlo %lo(__400_LGCR),gr4
+ sethi.p %hi(__400_LSBR),gr10
+ setlo %lo(__400_LSBR),gr10
+ sethi.p %hi(__400_LCR),gr11
+ setlo %lo(__400_LCR),gr11
+
+ # set the bus controller
+ ldi @(gr4,#0),gr5
+ ori gr5,#0xff,gr5 ; make sure all chip-selects are enabled
+ sti gr5,@(gr4,#0)
+
+ sethi.p %hi(__region_CS1),gr4
+ setlo %lo(__region_CS1),gr4
+ sethi.p %hi(__region_CS1_M),gr5
+ setlo %lo(__region_CS1_M),gr5
+ sethi.p %hi(__region_CS1_C),gr6
+ setlo %lo(__region_CS1_C),gr6
+ sti gr4,@(gr10,#1*0x08)
+ sti gr5,@(gr10,#1*0x08+0x100)
+ sti gr6,@(gr11,#1*0x08)
+ sethi.p %hi(__region_CS2),gr4
+ setlo %lo(__region_CS2),gr4
+ sethi.p %hi(__region_CS2_M),gr5
+ setlo %lo(__region_CS2_M),gr5
+ sethi.p %hi(__region_CS2_C),gr6
+ setlo %lo(__region_CS2_C),gr6
+ sti gr4,@(gr10,#2*0x08)
+ sti gr5,@(gr10,#2*0x08+0x100)
+ sti gr6,@(gr11,#2*0x08)
+ sethi.p %hi(__region_CS3),gr4
+ setlo %lo(__region_CS3),gr4
+ sethi.p %hi(__region_CS3_M),gr5
+ setlo %lo(__region_CS3_M),gr5
+ sethi.p %hi(__region_CS3_C),gr6
+ setlo %lo(__region_CS3_C),gr6
+ sti gr4,@(gr10,#3*0x08)
+ sti gr5,@(gr10,#3*0x08+0x100)
+ sti gr6,@(gr11,#3*0x08)
+ sethi.p %hi(__region_CS4),gr4
+ setlo %lo(__region_CS4),gr4
+ sethi.p %hi(__region_CS4_M),gr5
+ setlo %lo(__region_CS4_M),gr5
+ sethi.p %hi(__region_CS4_C),gr6
+ setlo %lo(__region_CS4_C),gr6
+ sti gr4,@(gr10,#4*0x08)
+ sti gr5,@(gr10,#4*0x08+0x100)
+ sti gr6,@(gr11,#4*0x08)
+ sethi.p %hi(__region_CS5),gr4
+ setlo %lo(__region_CS5),gr4
+ sethi.p %hi(__region_CS5_M),gr5
+ setlo %lo(__region_CS5_M),gr5
+ sethi.p %hi(__region_CS5_C),gr6
+ setlo %lo(__region_CS5_C),gr6
+ sti gr4,@(gr10,#5*0x08)
+ sti gr5,@(gr10,#5*0x08+0x100)
+ sti gr6,@(gr11,#5*0x08)
+ sethi.p %hi(__region_CS6),gr4
+ setlo %lo(__region_CS6),gr4
+ sethi.p %hi(__region_CS6_M),gr5
+ setlo %lo(__region_CS6_M),gr5
+ sethi.p %hi(__region_CS6_C),gr6
+ setlo %lo(__region_CS6_C),gr6
+ sti gr4,@(gr10,#6*0x08)
+ sti gr5,@(gr10,#6*0x08+0x100)
+ sti gr6,@(gr11,#6*0x08)
+ sethi.p %hi(__region_CS7),gr4
+ setlo %lo(__region_CS7),gr4
+ sethi.p %hi(__region_CS7_M),gr5
+ setlo %lo(__region_CS7_M),gr5
+ sethi.p %hi(__region_CS7_C),gr6
+ setlo %lo(__region_CS7_C),gr6
+ sti gr4,@(gr10,#7*0x08)
+ sti gr5,@(gr10,#7*0x08+0x100)
+ sti gr6,@(gr11,#7*0x08)
+ membar
+ bar
+
+ # adjust LED bank address
+ sethi.p %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30
+ setlo %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30
+ bralr
+
+###############################################################################
+#
+# determine the total SDRAM size
+#
+# ENTRY: EXIT:
+# GR25 - SDRAM size
+# GR26 &__head_reference [saved]
+# GR30 LED address [saved]
+#
+###############################################################################
+ .globl __head_fr401_survey_sdram
+__head_fr401_survey_sdram:
+ sethi.p %hi(__400_DAM0),gr11
+ setlo %lo(__400_DAM0),gr11
+ sethi.p %hi(__400_DBR0),gr12
+ setlo %lo(__400_DBR0),gr12
+
+ sethi.p %hi(0xfe000000),gr17 ; unused SDRAM DBR value
+ setlo %lo(0xfe000000),gr17
+ setlos #0,gr25
+
+ ldi @(gr12,#0x00),gr4 ; DAR0
+ subcc gr4,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS0
+ ldi @(gr11,#0x00),gr6 ; DAM0: bits 31:20 match addr 31:20
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS0:
+
+ ldi @(gr12,#0x08),gr4 ; DAR1
+ subcc gr4,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS1
+ ldi @(gr11,#0x08),gr6 ; DAM1: bits 31:20 match addr 31:20
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS1:
+
+ # FR401/FR401A does not have DCS2/3
+ movsg psr,gr3
+ srli gr3,#25,gr3
+ subicc gr3,#0x20>>1,gr0,icc0
+ beq icc0,#0,__head_no_DCS3
+
+ ldi @(gr12,#0x10),gr4 ; DAR2
+ subcc gr4,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS2
+ ldi @(gr11,#0x10),gr6 ; DAM2: bits 31:20 match addr 31:20
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS2:
+
+ ldi @(gr12,#0x18),gr4 ; DAR3
+ subcc gr4,gr17,gr0,icc0
+ beq icc0,#0,__head_no_DCS3
+ ldi @(gr11,#0x18),gr6 ; DAM3: bits 31:20 match addr 31:20
+ add gr25,gr6,gr25
+ addi gr25,#1,gr25
+__head_no_DCS3:
+ bralr
+
+###############################################################################
+#
+# set the protection map with the I/DAMPR registers
+#
+# ENTRY: EXIT:
+# GR25 SDRAM size [saved]
+# GR26 &__head_reference [saved]
+# GR30 LED address [saved]
+#
+###############################################################################
+ .globl __head_fr401_set_protection
+__head_fr401_set_protection:
+ movsg lr,gr27
+
+ # set the I/O region protection registers for FR401/3/5
+ sethi.p %hi(__region_IO),gr5
+ setlo %lo(__region_IO),gr5
+ ori gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5
+ movgs gr0,iampr7
+ movgs gr5,dampr7 ; General I/O tile
+
+ # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible
+ # - start with the highest numbered registers
+ sethi.p %hi(__kernel_image_end),gr8
+ setlo %lo(__kernel_image_end),gr8
+ sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap
+ setlo %lo(32768),gr4
+ add gr8,gr4,gr8
+ sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB
+ setlo %lo(1024*2048-1),gr4
+ add.p gr8,gr4,gr8
+ not gr4,gr4
+ and gr8,gr4,gr8
+
+ sethi.p %hi(__page_offset),gr9
+ setlo %lo(__page_offset),gr9
+ add gr9,gr25,gr9
+
+ # GR8 = base of uncovered RAM
+ # GR9 = top of uncovered RAM
+
+#ifdef CONFIG_MB93093_PDK
+ sethi.p %hi(__region_CS2),gr4
+ setlo %lo(__region_CS2),gr4
+ ori gr4,#xAMPRx_SS_1Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr4
+ movgs gr4,dampr6
+ movgs gr0,iampr6
+#else
+ call __head_split_region
+ movgs gr4,iampr6
+ movgs gr5,dampr6
+#endif
+ call __head_split_region
+ movgs gr4,iampr5
+ movgs gr5,dampr5
+ call __head_split_region
+ movgs gr4,iampr4
+ movgs gr5,dampr4
+ call __head_split_region
+ movgs gr4,iampr3
+ movgs gr5,dampr3
+ call __head_split_region
+ movgs gr4,iampr2
+ movgs gr5,dampr2
+ call __head_split_region
+ movgs gr4,iampr1
+ movgs gr5,dampr1
+
+ # cover kernel core image with kernel-only segment
+ sethi.p %hi(__page_offset),gr8
+ setlo %lo(__page_offset),gr8
+ call __head_split_region
+
+#ifdef CONFIG_PROTECT_KERNEL
+ ori.p gr4,#xAMPRx_S_KERNEL,gr4
+ ori gr5,#xAMPRx_S_KERNEL,gr5
+#endif
+
+ movgs gr4,iampr0
+ movgs gr5,dampr0
+ jmpl @(gr27,gr0)