Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
new file mode 100644
index 0000000..cf3f8014
--- /dev/null
+++ b/arch/ia64/kernel/mca_asm.S
@@ -0,0 +1,928 @@
+//
+// assembly portion of the IA64 MCA handling
+//
+// Mods by cfleck to integrate into kernel build
+// 00/03/15 davidm Added various stop bits to get a clean compile
+//
+// 00/03/29 cfleck Added code to save INIT handoff state in pt_regs format, switch to temp
+// kstack, switch modes, jump to C INIT handler
+//
+// 02/01/04 J.Hall <jenna.s.hall@intel.com>
+// Before entering virtual mode code:
+// 1. Check for TLB CPU error
+// 2. Restore current thread pointer to kr6
+// 3. Move stack ptr 16 bytes to conform to C calling convention
+//
+// 04/11/12 Russ Anderson <rja@sgi.com>
+// Added per cpu MCA/INIT stack save areas.
+//
+#include <linux/config.h>
+#include <linux/threads.h>
+
+#include <asm/asmmacro.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/mca_asm.h>
+#include <asm/mca.h>
+
+/*
+ * When we get a machine check, the kernel stack pointer is no longer
+ * valid, so we need to set a new stack pointer.
+ */
+#define MINSTATE_PHYS /* Make sure stack access is physical for MINSTATE */
+
+/*
+ * Needed for return context to SAL
+ */
+#define IA64_MCA_SAME_CONTEXT 0
+#define IA64_MCA_COLD_BOOT -2
+
+#include "minstate.h"
+
+/*
+ * SAL_TO_OS_MCA_HANDOFF_STATE (SAL 3.0 spec)
+ * 1. GR1 = OS GP
+ * 2. GR8 = PAL_PROC physical address
+ * 3. GR9 = SAL_PROC physical address
+ * 4. GR10 = SAL GP (physical)
+ * 5. GR11 = Rendez state
+ * 6. GR12 = Return address to location within SAL_CHECK
+ */
+#define SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(_tmp) \
+ LOAD_PHYSICAL(p0, _tmp, ia64_sal_to_os_handoff_state);; \
+ st8 [_tmp]=r1,0x08;; \
+ st8 [_tmp]=r8,0x08;; \
+ st8 [_tmp]=r9,0x08;; \
+ st8 [_tmp]=r10,0x08;; \
+ st8 [_tmp]=r11,0x08;; \
+ st8 [_tmp]=r12,0x08;; \
+ st8 [_tmp]=r17,0x08;; \
+ st8 [_tmp]=r18,0x08
+
+/*
+ * OS_MCA_TO_SAL_HANDOFF_STATE (SAL 3.0 spec)
+ * (p6) is executed if we never entered virtual mode (TLB error)
+ * (p7) is executed if we entered virtual mode as expected (normal case)
+ * 1. GR8 = OS_MCA return status
+ * 2. GR9 = SAL GP (physical)
+ * 3. GR10 = 0/1 returning same/new context
+ * 4. GR22 = New min state save area pointer
+ * returns ptr to SAL rtn save loc in _tmp
+ */
+#define OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(_tmp) \
+ movl _tmp=ia64_os_to_sal_handoff_state;; \
+ DATA_VA_TO_PA(_tmp);; \
+ ld8 r8=[_tmp],0x08;; \
+ ld8 r9=[_tmp],0x08;; \
+ ld8 r10=[_tmp],0x08;; \
+ ld8 r22=[_tmp],0x08;;
+ // now _tmp is pointing to SAL rtn save location
+
+/*
+ * COLD_BOOT_HANDOFF_STATE() sets ia64_mca_os_to_sal_state
+ * imots_os_status=IA64_MCA_COLD_BOOT
+ * imots_sal_gp=SAL GP
+ * imots_context=IA64_MCA_SAME_CONTEXT
+ * imots_new_min_state=Min state save area pointer
+ * imots_sal_check_ra=Return address to location within SAL_CHECK
+ *
+ */
+#define COLD_BOOT_HANDOFF_STATE(sal_to_os_handoff,os_to_sal_handoff,tmp)\
+ movl tmp=IA64_MCA_COLD_BOOT; \
+ movl sal_to_os_handoff=__pa(ia64_sal_to_os_handoff_state); \
+ movl os_to_sal_handoff=__pa(ia64_os_to_sal_handoff_state);; \
+ st8 [os_to_sal_handoff]=tmp,8;; \
+ ld8 tmp=[sal_to_os_handoff],48;; \
+ st8 [os_to_sal_handoff]=tmp,8;; \
+ movl tmp=IA64_MCA_SAME_CONTEXT;; \
+ st8 [os_to_sal_handoff]=tmp,8;; \
+ ld8 tmp=[sal_to_os_handoff],-8;; \
+ st8 [os_to_sal_handoff]=tmp,8;; \
+ ld8 tmp=[sal_to_os_handoff];; \
+ st8 [os_to_sal_handoff]=tmp;;
+
+#define GET_IA64_MCA_DATA(reg) \
+ GET_THIS_PADDR(reg, ia64_mca_data) \
+ ;; \
+ ld8 reg=[reg]
+
+ .global ia64_os_mca_dispatch
+ .global ia64_os_mca_dispatch_end
+ .global ia64_sal_to_os_handoff_state
+ .global ia64_os_to_sal_handoff_state
+
+ .text
+ .align 16
+
+ia64_os_mca_dispatch:
+
+ // Serialize all MCA processing
+ mov r3=1;;
+ LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);;
+ia64_os_mca_spin:
+ xchg8 r4=[r2],r3;;
+ cmp.ne p6,p0=r4,r0
+(p6) br ia64_os_mca_spin
+
+ // Save the SAL to OS MCA handoff state as defined
+ // by SAL SPEC 3.0
+ // NOTE : The order in which the state gets saved
+ // is dependent on the way the C-structure
+ // for ia64_mca_sal_to_os_state_t has been
+ // defined in include/asm/mca.h
+ SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2)
+ ;;
+
+ // LOG PROCESSOR STATE INFO FROM HERE ON..
+begin_os_mca_dump:
+ br ia64_os_mca_proc_state_dump;;
+
+ia64_os_mca_done_dump:
+
+ LOAD_PHYSICAL(p0,r16,ia64_sal_to_os_handoff_state+56)
+ ;;
+ ld8 r18=[r16] // Get processor state parameter on existing PALE_CHECK.
+ ;;
+ tbit.nz p6,p7=r18,60
+(p7) br.spnt done_tlb_purge_and_reload
+
+ // The following code purges TC and TR entries. Then reload all TC entries.
+ // Purge percpu data TC entries.
+begin_tlb_purge_and_reload:
+
+#define O(member) IA64_CPUINFO_##member##_OFFSET
+
+ GET_THIS_PADDR(r2, cpu_info) // load phys addr of cpu_info into r2
+ ;;
+ addl r17=O(PTCE_STRIDE),r2
+ addl r2=O(PTCE_BASE),r2
+ ;;
+ ld8 r18=[r2],(O(PTCE_COUNT)-O(PTCE_BASE));; // r18=ptce_base
+ ld4 r19=[r2],4 // r19=ptce_count[0]
+ ld4 r21=[r17],4 // r21=ptce_stride[0]
+ ;;
+ ld4 r20=[r2] // r20=ptce_count[1]
+ ld4 r22=[r17] // r22=ptce_stride[1]
+ mov r24=0
+ ;;
+ adds r20=-1,r20
+ ;;
+#undef O
+
+2:
+ cmp.ltu p6,p7=r24,r19
+(p7) br.cond.dpnt.few 4f
+ mov ar.lc=r20
+3:
+ ptc.e r18
+ ;;
+ add r18=r22,r18
+ br.cloop.sptk.few 3b
+ ;;
+ add r18=r21,r18
+ add r24=1,r24
+ ;;
+ br.sptk.few 2b
+4:
+ srlz.i // srlz.i implies srlz.d
+ ;;
+
+ // Now purge addresses formerly mapped by TR registers
+ // 1. Purge ITR&DTR for kernel.
+ movl r16=KERNEL_START
+ mov r18=KERNEL_TR_PAGE_SHIFT<<2
+ ;;
+ ptr.i r16, r18
+ ptr.d r16, r18
+ ;;
+ srlz.i
+ ;;
+ srlz.d
+ ;;
+ // 2. Purge DTR for PERCPU data.
+ movl r16=PERCPU_ADDR
+ mov r18=PERCPU_PAGE_SHIFT<<2
+ ;;
+ ptr.d r16,r18
+ ;;
+ srlz.d
+ ;;
+ // 3. Purge ITR for PAL code.
+ GET_THIS_PADDR(r2, ia64_mca_pal_base)
+ ;;
+ ld8 r16=[r2]
+ mov r18=IA64_GRANULE_SHIFT<<2
+ ;;
+ ptr.i r16,r18
+ ;;
+ srlz.i
+ ;;
+ // 4. Purge DTR for stack.
+ mov r16=IA64_KR(CURRENT_STACK)
+ ;;
+ shl r16=r16,IA64_GRANULE_SHIFT
+ movl r19=PAGE_OFFSET
+ ;;
+ add r16=r19,r16
+ mov r18=IA64_GRANULE_SHIFT<<2
+ ;;
+ ptr.d r16,r18
+ ;;
+ srlz.i
+ ;;
+ // Finally reload the TR registers.
+ // 1. Reload DTR/ITR registers for kernel.
+ mov r18=KERNEL_TR_PAGE_SHIFT<<2
+ movl r17=KERNEL_START
+ ;;
+ mov cr.itir=r18
+ mov cr.ifa=r17
+ mov r16=IA64_TR_KERNEL
+ mov r19=ip
+ movl r18=PAGE_KERNEL
+ ;;
+ dep r17=0,r19,0, KERNEL_TR_PAGE_SHIFT
+ ;;
+ or r18=r17,r18
+ ;;
+ itr.i itr[r16]=r18
+ ;;
+ itr.d dtr[r16]=r18
+ ;;
+ srlz.i
+ srlz.d
+ ;;
+ // 2. Reload DTR register for PERCPU data.
+ GET_THIS_PADDR(r2, ia64_mca_per_cpu_pte)
+ ;;
+ movl r16=PERCPU_ADDR // vaddr
+ movl r18=PERCPU_PAGE_SHIFT<<2
+ ;;
+ mov cr.itir=r18
+ mov cr.ifa=r16
+ ;;
+ ld8 r18=[r2] // load per-CPU PTE
+ mov r16=IA64_TR_PERCPU_DATA;
+ ;;
+ itr.d dtr[r16]=r18
+ ;;
+ srlz.d
+ ;;
+ // 3. Reload ITR for PAL code.
+ GET_THIS_PADDR(r2, ia64_mca_pal_pte)
+ ;;
+ ld8 r18=[r2] // load PAL PTE
+ ;;
+ GET_THIS_PADDR(r2, ia64_mca_pal_base)
+ ;;
+ ld8 r16=[r2] // load PAL vaddr
+ mov r19=IA64_GRANULE_SHIFT<<2
+ ;;
+ mov cr.itir=r19
+ mov cr.ifa=r16
+ mov r20=IA64_TR_PALCODE
+ ;;
+ itr.i itr[r20]=r18
+ ;;
+ srlz.i
+ ;;
+ // 4. Reload DTR for stack.
+ mov r16=IA64_KR(CURRENT_STACK)
+ ;;
+ shl r16=r16,IA64_GRANULE_SHIFT
+ movl r19=PAGE_OFFSET
+ ;;
+ add r18=r19,r16
+ movl r20=PAGE_KERNEL
+ ;;
+ add r16=r20,r16
+ mov r19=IA64_GRANULE_SHIFT<<2
+ ;;
+ mov cr.itir=r19
+ mov cr.ifa=r18
+ mov r20=IA64_TR_CURRENT_STACK
+ ;;
+ itr.d dtr[r20]=r16
+ ;;
+ srlz.d
+ ;;
+ br.sptk.many done_tlb_purge_and_reload
+err:
+ COLD_BOOT_HANDOFF_STATE(r20,r21,r22)
+ br.sptk.many ia64_os_mca_done_restore
+
+done_tlb_purge_and_reload:
+
+ // Setup new stack frame for OS_MCA handling
+ GET_IA64_MCA_DATA(r2)
+ ;;
+ add r3 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2
+ add r2 = IA64_MCA_CPU_RBSTORE_OFFSET, r2
+ ;;
+ rse_switch_context(r6,r3,r2);; // RSC management in this new context
+
+ GET_IA64_MCA_DATA(r2)
+ ;;
+ add r2 = IA64_MCA_CPU_STACK_OFFSET+IA64_MCA_STACK_SIZE-16, r2
+ ;;
+ mov r12=r2 // establish new stack-pointer
+
+ // Enter virtual mode from physical mode
+ VIRTUAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_begin, r4)
+ia64_os_mca_virtual_begin:
+
+ // Call virtual mode handler
+ movl r2=ia64_mca_ucmc_handler;;
+ mov b6=r2;;
+ br.call.sptk.many b0=b6;;
+.ret0:
+ // Revert back to physical mode before going back to SAL
+ PHYSICAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_end, r4)
+ia64_os_mca_virtual_end:
+
+ // restore the original stack frame here
+ GET_IA64_MCA_DATA(r2)
+ ;;
+ add r2 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2
+ ;;
+ movl r4=IA64_PSR_MC
+ ;;
+ rse_return_context(r4,r3,r2) // switch from interrupt context for RSE
+
+ // let us restore all the registers from our PSI structure
+ mov r8=gp
+ ;;
+begin_os_mca_restore:
+ br ia64_os_mca_proc_state_restore;;
+
+ia64_os_mca_done_restore:
+ OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(r2);;
+ // branch back to SALE_CHECK
+ ld8 r3=[r2];;
+ mov b0=r3;; // SAL_CHECK return address
+
+ // release lock
+ movl r3=ia64_mca_serialize;;
+ DATA_VA_TO_PA(r3);;
+ st8.rel [r3]=r0
+
+ br b0
+ ;;
+ia64_os_mca_dispatch_end:
+//EndMain//////////////////////////////////////////////////////////////////////
+
+
+//++
+// Name:
+// ia64_os_mca_proc_state_dump()
+//
+// Stub Description:
+//
+// This stub dumps the processor state during MCHK to a data area
+//
+//--
+
+ia64_os_mca_proc_state_dump:
+// Save bank 1 GRs 16-31 which will be used by c-language code when we switch
+// to virtual addressing mode.
+ GET_IA64_MCA_DATA(r2)
+ ;;
+ add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2
+ ;;
+// save ar.NaT
+ mov r5=ar.unat // ar.unat
+
+// save banked GRs 16-31 along with NaT bits
+ bsw.1;;
+ st8.spill [r2]=r16,8;;
+ st8.spill [r2]=r17,8;;
+ st8.spill [r2]=r18,8;;
+ st8.spill [r2]=r19,8;;
+ st8.spill [r2]=r20,8;;
+ st8.spill [r2]=r21,8;;
+ st8.spill [r2]=r22,8;;
+ st8.spill [r2]=r23,8;;
+ st8.spill [r2]=r24,8;;
+ st8.spill [r2]=r25,8;;
+ st8.spill [r2]=r26,8;;
+ st8.spill [r2]=r27,8;;
+ st8.spill [r2]=r28,8;;
+ st8.spill [r2]=r29,8;;
+ st8.spill [r2]=r30,8;;
+ st8.spill [r2]=r31,8;;
+
+ mov r4=ar.unat;;
+ st8 [r2]=r4,8 // save User NaT bits for r16-r31
+ mov ar.unat=r5 // restore original unat
+ bsw.0;;
+
+//save BRs
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2 // duplicate r2 in r4
+
+ mov r3=b0
+ mov r5=b1
+ mov r7=b2;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=b3
+ mov r5=b4
+ mov r7=b5;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=b6
+ mov r5=b7;;
+ st8 [r2]=r3,2*8
+ st8 [r4]=r5,2*8;;
+
+cSaveCRs:
+// save CRs
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2 // duplicate r2 in r4
+
+ mov r3=cr.dcr
+ mov r5=cr.itm
+ mov r7=cr.iva;;
+
+ st8 [r2]=r3,8*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;; // 48 byte rements
+
+ mov r3=cr.pta;;
+ st8 [r2]=r3,8*8;; // 64 byte rements
+
+// if PSR.ic=0, reading interruption registers causes an illegal operation fault
+ mov r3=psr;;
+ tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test
+(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc.
+begin_skip_intr_regs:
+(p6) br SkipIntrRegs;;
+
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2 // duplicate r2 in r6
+
+ mov r3=cr.ipsr
+ mov r5=cr.isr
+ mov r7=r0;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=cr.iip
+ mov r5=cr.ifa
+ mov r7=cr.itir;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=cr.iipa
+ mov r5=cr.ifs
+ mov r7=cr.iim;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=cr25;; // cr.iha
+ st8 [r2]=r3,160;; // 160 byte rement
+
+SkipIntrRegs:
+ st8 [r2]=r0,152;; // another 152 byte .
+
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2 // duplicate r2 in r6
+
+ mov r3=cr.lid
+// mov r5=cr.ivr // cr.ivr, don't read it
+ mov r7=cr.tpr;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=r0 // cr.eoi => cr67
+ mov r5=r0 // cr.irr0 => cr68
+ mov r7=r0;; // cr.irr1 => cr69
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=r0 // cr.irr2 => cr70
+ mov r5=r0 // cr.irr3 => cr71
+ mov r7=cr.itv;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=cr.pmv
+ mov r5=cr.cmcv;;
+ st8 [r2]=r3,7*8
+ st8 [r4]=r5,7*8;;
+
+ mov r3=r0 // cr.lrr0 => cr80
+ mov r5=r0;; // cr.lrr1 => cr81
+ st8 [r2]=r3,23*8
+ st8 [r4]=r5,23*8;;
+
+ adds r2=25*8,r2;;
+
+cSaveARs:
+// save ARs
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2 // duplicate r2 in r6
+
+ mov r3=ar.k0
+ mov r5=ar.k1
+ mov r7=ar.k2;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=ar.k3
+ mov r5=ar.k4
+ mov r7=ar.k5;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=ar.k6
+ mov r5=ar.k7
+ mov r7=r0;; // ar.kr8
+ st8 [r2]=r3,10*8
+ st8 [r4]=r5,10*8
+ st8 [r6]=r7,10*8;; // rement by 72 bytes
+
+ mov r3=ar.rsc
+ mov ar.rsc=r0 // put RSE in enforced lazy mode
+ mov r5=ar.bsp
+ ;;
+ mov r7=ar.bspstore;;
+ st8 [r2]=r3,3*8
+ st8 [r4]=r5,3*8
+ st8 [r6]=r7,3*8;;
+
+ mov r3=ar.rnat;;
+ st8 [r2]=r3,8*13 // increment by 13x8 bytes
+
+ mov r3=ar.ccv;;
+ st8 [r2]=r3,8*4
+
+ mov r3=ar.unat;;
+ st8 [r2]=r3,8*4
+
+ mov r3=ar.fpsr;;
+ st8 [r2]=r3,8*4
+
+ mov r3=ar.itc;;
+ st8 [r2]=r3,160 // 160
+
+ mov r3=ar.pfs;;
+ st8 [r2]=r3,8
+
+ mov r3=ar.lc;;
+ st8 [r2]=r3,8
+
+ mov r3=ar.ec;;
+ st8 [r2]=r3
+ add r2=8*62,r2 //padding
+
+// save RRs
+ mov ar.lc=0x08-1
+ movl r4=0x00;;
+
+cStRR:
+ dep.z r5=r4,61,3;;
+ mov r3=rr[r5];;
+ st8 [r2]=r3,8
+ add r4=1,r4
+ br.cloop.sptk.few cStRR
+ ;;
+end_os_mca_dump:
+ br ia64_os_mca_done_dump;;
+
+//EndStub//////////////////////////////////////////////////////////////////////
+
+
+//++
+// Name:
+// ia64_os_mca_proc_state_restore()
+//
+// Stub Description:
+//
+// This is a stub to restore the saved processor state during MCHK
+//
+//--
+
+ia64_os_mca_proc_state_restore:
+
+// Restore bank1 GR16-31
+ GET_IA64_MCA_DATA(r2)
+ ;;
+ add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2
+
+restore_GRs: // restore bank-1 GRs 16-31
+ bsw.1;;
+ add r3=16*8,r2;; // to get to NaT of GR 16-31
+ ld8 r3=[r3];;
+ mov ar.unat=r3;; // first restore NaT
+
+ ld8.fill r16=[r2],8;;
+ ld8.fill r17=[r2],8;;
+ ld8.fill r18=[r2],8;;
+ ld8.fill r19=[r2],8;;
+ ld8.fill r20=[r2],8;;
+ ld8.fill r21=[r2],8;;
+ ld8.fill r22=[r2],8;;
+ ld8.fill r23=[r2],8;;
+ ld8.fill r24=[r2],8;;
+ ld8.fill r25=[r2],8;;
+ ld8.fill r26=[r2],8;;
+ ld8.fill r27=[r2],8;;
+ ld8.fill r28=[r2],8;;
+ ld8.fill r29=[r2],8;;
+ ld8.fill r30=[r2],8;;
+ ld8.fill r31=[r2],8;;
+
+ ld8 r3=[r2],8;; // increment to skip NaT
+ bsw.0;;
+
+restore_BRs:
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2;; // duplicate r2 in r4
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+ mov b0=r3
+ mov b1=r5
+ mov b2=r7;;
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+ mov b3=r3
+ mov b4=r5
+ mov b5=r7;;
+
+ ld8 r3=[r2],2*8
+ ld8 r5=[r4],2*8;;
+ mov b6=r3
+ mov b7=r5;;
+
+restore_CRs:
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2;; // duplicate r2 in r4
+
+ ld8 r3=[r2],8*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;; // 48 byte increments
+ mov cr.dcr=r3
+ mov cr.itm=r5
+ mov cr.iva=r7;;
+
+ ld8 r3=[r2],8*8;; // 64 byte increments
+// mov cr.pta=r3
+
+
+// if PSR.ic=1, reading interruption registers causes an illegal operation fault
+ mov r3=psr;;
+ tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test
+(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc.
+
+begin_rskip_intr_regs:
+(p6) br rSkipIntrRegs;;
+
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2;; // duplicate r2 in r4
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+ mov cr.ipsr=r3
+// mov cr.isr=r5 // cr.isr is read only
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+ mov cr.iip=r3
+ mov cr.ifa=r5
+ mov cr.itir=r7;;
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+ mov cr.iipa=r3
+ mov cr.ifs=r5
+ mov cr.iim=r7
+
+ ld8 r3=[r2],160;; // 160 byte increment
+ mov cr.iha=r3
+
+rSkipIntrRegs:
+ ld8 r3=[r2],152;; // another 152 byte inc.
+
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2;; // duplicate r2 in r6
+
+ ld8 r3=[r2],8*3
+ ld8 r5=[r4],8*3
+ ld8 r7=[r6],8*3;;
+ mov cr.lid=r3
+// mov cr.ivr=r5 // cr.ivr is read only
+ mov cr.tpr=r7;;
+
+ ld8 r3=[r2],8*3
+ ld8 r5=[r4],8*3
+ ld8 r7=[r6],8*3;;
+// mov cr.eoi=r3
+// mov cr.irr0=r5 // cr.irr0 is read only
+// mov cr.irr1=r7;; // cr.irr1 is read only
+
+ ld8 r3=[r2],8*3
+ ld8 r5=[r4],8*3
+ ld8 r7=[r6],8*3;;
+// mov cr.irr2=r3 // cr.irr2 is read only
+// mov cr.irr3=r5 // cr.irr3 is read only
+ mov cr.itv=r7;;
+
+ ld8 r3=[r2],8*7
+ ld8 r5=[r4],8*7;;
+ mov cr.pmv=r3
+ mov cr.cmcv=r5;;
+
+ ld8 r3=[r2],8*23
+ ld8 r5=[r4],8*23;;
+ adds r2=8*23,r2
+ adds r4=8*23,r4;;
+// mov cr.lrr0=r3
+// mov cr.lrr1=r5
+
+ adds r2=8*2,r2;;
+
+restore_ARs:
+ add r4=8,r2 // duplicate r2 in r4
+ add r6=2*8,r2;; // duplicate r2 in r4
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+ mov ar.k0=r3
+ mov ar.k1=r5
+ mov ar.k2=r7;;
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+ mov ar.k3=r3
+ mov ar.k4=r5
+ mov ar.k5=r7;;
+
+ ld8 r3=[r2],10*8
+ ld8 r5=[r4],10*8
+ ld8 r7=[r6],10*8;;
+ mov ar.k6=r3
+ mov ar.k7=r5
+ ;;
+
+ ld8 r3=[r2],3*8
+ ld8 r5=[r4],3*8
+ ld8 r7=[r6],3*8;;
+// mov ar.rsc=r3
+// mov ar.bsp=r5 // ar.bsp is read only
+ mov ar.rsc=r0 // make sure that RSE is in enforced lazy mode
+ ;;
+ mov ar.bspstore=r7;;
+
+ ld8 r9=[r2],8*13;;
+ mov ar.rnat=r9
+
+ mov ar.rsc=r3
+ ld8 r3=[r2],8*4;;
+ mov ar.ccv=r3
+
+ ld8 r3=[r2],8*4;;
+ mov ar.unat=r3
+
+ ld8 r3=[r2],8*4;;
+ mov ar.fpsr=r3
+
+ ld8 r3=[r2],160;; // 160
+// mov ar.itc=r3
+
+ ld8 r3=[r2],8;;
+ mov ar.pfs=r3
+
+ ld8 r3=[r2],8;;
+ mov ar.lc=r3
+
+ ld8 r3=[r2];;
+ mov ar.ec=r3
+ add r2=8*62,r2;; // padding
+
+restore_RRs:
+ mov r5=ar.lc
+ mov ar.lc=0x08-1
+ movl r4=0x00;;
+cStRRr:
+ dep.z r7=r4,61,3
+ ld8 r3=[r2],8;;
+ mov rr[r7]=r3 // what are its access previledges?
+ add r4=1,r4
+ br.cloop.sptk.few cStRRr
+ ;;
+ mov ar.lc=r5
+ ;;
+end_os_mca_restore:
+ br ia64_os_mca_done_restore;;
+
+//EndStub//////////////////////////////////////////////////////////////////////
+
+
+// ok, the issue here is that we need to save state information so
+// it can be useable by the kernel debugger and show regs routines.
+// In order to do this, our best bet is save the current state (plus
+// the state information obtain from the MIN_STATE_AREA) into a pt_regs
+// format. This way we can pass it on in a useable format.
+//
+
+//
+// SAL to OS entry point for INIT on the monarch processor
+// This has been defined for registration purposes with SAL
+// as a part of ia64_mca_init.
+//
+// When we get here, the following registers have been
+// set by the SAL for our use
+//
+// 1. GR1 = OS INIT GP
+// 2. GR8 = PAL_PROC physical address
+// 3. GR9 = SAL_PROC physical address
+// 4. GR10 = SAL GP (physical)
+// 5. GR11 = Init Reason
+// 0 = Received INIT for event other than crash dump switch
+// 1 = Received wakeup at the end of an OS_MCA corrected machine check
+// 2 = Received INIT dude to CrashDump switch assertion
+//
+// 6. GR12 = Return address to location within SAL_INIT procedure
+
+
+GLOBAL_ENTRY(ia64_monarch_init_handler)
+ .prologue
+ // stash the information the SAL passed to os
+ SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2)
+ ;;
+ SAVE_MIN_WITH_COVER
+ ;;
+ mov r8=cr.ifa
+ mov r9=cr.isr
+ adds r3=8,r2 // set up second base pointer
+ ;;
+ SAVE_REST
+
+// ok, enough should be saved at this point to be dangerous, and supply
+// information for a dump
+// We need to switch to Virtual mode before hitting the C functions.
+
+ movl r2=IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN
+ mov r3=psr // get the current psr, minimum enabled at this point
+ ;;
+ or r2=r2,r3
+ ;;
+ movl r3=IVirtual_Switch
+ ;;
+ mov cr.iip=r3 // short return to set the appropriate bits
+ mov cr.ipsr=r2 // need to do an rfi to set appropriate bits
+ ;;
+ rfi
+ ;;
+IVirtual_Switch:
+ //
+ // We should now be running virtual
+ //
+ // Let's call the C handler to get the rest of the state info
+ //
+ alloc r14=ar.pfs,0,0,2,0 // now it's safe (must be first in insn group!)
+ ;;
+ adds out0=16,sp // out0 = pointer to pt_regs
+ ;;
+ DO_SAVE_SWITCH_STACK
+ .body
+ adds out1=16,sp // out0 = pointer to switch_stack
+
+ br.call.sptk.many rp=ia64_init_handler
+.ret1:
+
+return_from_init:
+ br.sptk return_from_init
+END(ia64_monarch_init_handler)
+
+//
+// SAL to OS entry point for INIT on the slave processor
+// This has been defined for registration purposes with SAL
+// as a part of ia64_mca_init.
+//
+
+GLOBAL_ENTRY(ia64_slave_init_handler)
+1: br.sptk 1b
+END(ia64_slave_init_handler)