Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S
new file mode 100644
index 0000000..aa4df87
--- /dev/null
+++ b/arch/m68k/ifpsp060/os.S
@@ -0,0 +1,396 @@
+|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
+|M68000 Hi-Performance Microprocessor Division
+|M68060 Software Package
+|Production Release P1.00 -- October 10, 1994
+|
+|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved.
+|
+|THE SOFTWARE is provided on an "AS IS" basis and without warranty.
+|To the maximum extent permitted by applicable law,
+|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
+|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+|and any warranty against infringement with regard to the SOFTWARE
+|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials.
+|
+|To the maximum extent permitted by applicable law,
+|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
+|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
+|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS)
+|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE.
+|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE.
+|
+|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE
+|so long as this entire notice is retained without alteration in any modified and/or
+|redistributed versions, and that such modified versions are clearly identified as such.
+|No licenses are granted by implication, estoppel or otherwise under any patents
+|or trademarks of Motorola, Inc.
+|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+| os.s
+|
+| This file contains:
+| - example "Call-Out"s required by both the ISP and FPSP.
+|
+
+#include <linux/linkage.h>
+
+|################################
+| EXAMPLE CALL-OUTS #
+| #
+| _060_dmem_write() #
+| _060_dmem_read() #
+| _060_imem_read() #
+| _060_dmem_read_byte() #
+| _060_dmem_read_word() #
+| _060_dmem_read_long() #
+| _060_imem_read_word() #
+| _060_imem_read_long() #
+| _060_dmem_write_byte() #
+| _060_dmem_write_word() #
+| _060_dmem_write_long() #
+| #
+| _060_real_trace() #
+| _060_real_access() #
+|################################
+
+|
+| Each IO routine checks to see if the memory write/read is to/from user
+| or supervisor application space. The examples below use simple "move"
+| instructions for supervisor mode applications and call _copyin()/_copyout()
+| for user mode applications.
+| When installing the 060SP, the _copyin()/_copyout() equivalents for a
+| given operating system should be substituted.
+|
+| The addresses within the 060SP are guaranteed to be on the stack.
+| The result is that Unix processes are allowed to sleep as a consequence
+| of a page fault during a _copyout.
+|
+| Linux/68k: The _060_[id]mem_{read,write}_{byte,word,long} functions
+| (i.e. all the known length <= 4) are implemented by single moves
+| statements instead of (more expensive) copy{in,out} calls, if
+| working in user space
+
+|
+| _060_dmem_write():
+|
+| Writes to data memory while in supervisor mode.
+|
+| INPUTS:
+| a0 - supervisor source address
+| a1 - user destination address
+| d0 - number of bytes to write
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_dmem_write
+_060_dmem_write:
+ subq.l #1,%d0
+ btst #0x5,0x4(%a6) | check for supervisor state
+ beqs user_write
+super_write:
+ move.b (%a0)+,(%a1)+ | copy 1 byte
+ dbra %d0,super_write | quit if --ctr < 0
+ clr.l %d1 | return success
+ rts
+user_write:
+ move.b (%a0)+,%d1 | copy 1 byte
+copyoutae:
+ movs.b %d1,(%a1)+
+ dbra %d0,user_write | quit if --ctr < 0
+ clr.l %d1 | return success
+ rts
+
+|
+| _060_imem_read(), _060_dmem_read():
+|
+| Reads from data/instruction memory while in supervisor mode.
+|
+| INPUTS:
+| a0 - user source address
+| a1 - supervisor destination address
+| d0 - number of bytes to read
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_imem_read
+ .global _060_dmem_read
+_060_imem_read:
+_060_dmem_read:
+ subq.l #1,%d0
+ btst #0x5,0x4(%a6) | check for supervisor state
+ beqs user_read
+super_read:
+ move.b (%a0)+,(%a1)+ | copy 1 byte
+ dbra %d0,super_read | quit if --ctr < 0
+ clr.l %d1 | return success
+ rts
+user_read:
+copyinae:
+ movs.b (%a0)+,%d1
+ move.b %d1,(%a1)+ | copy 1 byte
+ dbra %d0,user_read | quit if --ctr < 0
+ clr.l %d1 | return success
+ rts
+
+|
+| _060_dmem_read_byte():
+|
+| Read a data byte from user memory.
+|
+| INPUTS:
+| a0 - user source address
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d0 - data byte in d0
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_dmem_read_byte
+_060_dmem_read_byte:
+ clr.l %d0 | clear whole longword
+ clr.l %d1 | assume success
+ btst #0x5,0x4(%a6) | check for supervisor state
+ bnes dmrbs | supervisor
+dmrbuae:movs.b (%a0),%d0 | fetch user byte
+ rts
+dmrbs: move.b (%a0),%d0 | fetch super byte
+ rts
+
+|
+| _060_dmem_read_word():
+|
+| Read a data word from user memory.
+|
+| INPUTS:
+| a0 - user source address
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d0 - data word in d0
+| d1 - 0 = success, !0 = failure
+|
+| _060_imem_read_word():
+|
+| Read an instruction word from user memory.
+|
+| INPUTS:
+| a0 - user source address
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d0 - instruction word in d0
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_dmem_read_word
+ .global _060_imem_read_word
+_060_dmem_read_word:
+_060_imem_read_word:
+ clr.l %d1 | assume success
+ clr.l %d0 | clear whole longword
+ btst #0x5,0x4(%a6) | check for supervisor state
+ bnes dmrws | supervisor
+dmrwuae:movs.w (%a0), %d0 | fetch user word
+ rts
+dmrws: move.w (%a0), %d0 | fetch super word
+ rts
+
+|
+| _060_dmem_read_long():
+|
+
+|
+| INPUTS:
+| a0 - user source address
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d0 - data longword in d0
+| d1 - 0 = success, !0 = failure
+|
+| _060_imem_read_long():
+|
+| Read an instruction longword from user memory.
+|
+| INPUTS:
+| a0 - user source address
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d0 - instruction longword in d0
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_dmem_read_long
+ .global _060_imem_read_long
+_060_dmem_read_long:
+_060_imem_read_long:
+ clr.l %d1 | assume success
+ btst #0x5,0x4(%a6) | check for supervisor state
+ bnes dmrls | supervisor
+dmrluae:movs.l (%a0),%d0 | fetch user longword
+ rts
+dmrls: move.l (%a0),%d0 | fetch super longword
+ rts
+
+|
+| _060_dmem_write_byte():
+|
+| Write a data byte to user memory.
+|
+| INPUTS:
+| a0 - user destination address
+| d0 - data byte in d0
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_dmem_write_byte
+_060_dmem_write_byte:
+ clr.l %d1 | assume success
+ btst #0x5,0x4(%a6) | check for supervisor state
+ bnes dmwbs | supervisor
+dmwbuae:movs.b %d0,(%a0) | store user byte
+ rts
+dmwbs: move.b %d0,(%a0) | store super byte
+ rts
+
+|
+| _060_dmem_write_word():
+|
+| Write a data word to user memory.
+|
+| INPUTS:
+| a0 - user destination address
+| d0 - data word in d0
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_dmem_write_word
+_060_dmem_write_word:
+ clr.l %d1 | assume success
+ btst #0x5,0x4(%a6) | check for supervisor state
+ bnes dmwws | supervisor
+dmwwu:
+dmwwuae:movs.w %d0,(%a0) | store user word
+ bras dmwwr
+dmwws: move.w %d0,(%a0) | store super word
+dmwwr: clr.l %d1 | return success
+ rts
+
+|
+| _060_dmem_write_long():
+|
+| Write a data longword to user memory.
+|
+| INPUTS:
+| a0 - user destination address
+| d0 - data longword in d0
+| 0x4(%a6),bit5 - 1 = supervisor mode, 0 = user mode
+| OUTPUTS:
+| d1 - 0 = success, !0 = failure
+|
+ .global _060_dmem_write_long
+_060_dmem_write_long:
+ clr.l %d1 | assume success
+ btst #0x5,0x4(%a6) | check for supervisor state
+ bnes dmwls | supervisor
+dmwluae:movs.l %d0,(%a0) | store user longword
+ rts
+dmwls: move.l %d0,(%a0) | store super longword
+ rts
+
+
+#if 0
+|###############################################
+
+|
+| Use these routines if your kernel doesn't have _copyout/_copyin equivalents.
+| Assumes that D0/D1/A0/A1 are scratch registers. The _copyin/_copyout
+| below assume that the SFC/DFC have been set previously.
+|
+| Linux/68k: These are basically non-inlined versions of
+| memcpy_{to,from}fs, but without long-transfer optimization
+| Note: Assumed that SFC/DFC are pointing correctly to user data
+| space... Should be right, or are there any exceptions?
+
+|
+| int _copyout(supervisor_addr, user_addr, nbytes)
+|
+ .global _copyout
+_copyout:
+ move.l 4(%sp),%a0 | source
+ move.l 8(%sp),%a1 | destination
+ move.l 12(%sp),%d0 | count
+ subq.l #1,%d0
+moreout:
+ move.b (%a0)+,%d1 | fetch supervisor byte
+copyoutae:
+ movs.b %d1,(%a1)+ | store user byte
+ dbra %d0,moreout | are we through yet?
+ moveq #0,%d0 | return success
+ rts
+
+|
+| int _copyin(user_addr, supervisor_addr, nbytes)
+|
+ .global _copyin
+_copyin:
+ move.l 4(%sp),%a0 | source
+ move.l 8(%sp),%a1 | destination
+ move.l 12(%sp),%d0 | count
+ subq.l #1,%d0
+morein:
+copyinae:
+ movs.b (%a0)+,%d1 | fetch user byte
+ move.b %d1,(%a1)+ | write supervisor byte
+ dbra %d0,morein | are we through yet?
+ moveq #0,%d0 | return success
+ rts
+#endif
+
+|###########################################################################
+
+|
+| _060_real_trace():
+|
+| This is the exit point for the 060FPSP when an instruction is being traced
+| and there are no other higher priority exceptions pending for this instruction
+| or they have already been processed.
+|
+| The sample code below simply executes an "rte".
+|
+ .global _060_real_trace
+_060_real_trace:
+ bral trap
+
+|
+| _060_real_access():
+|
+| This is the exit point for the 060FPSP when an access error exception
+| is encountered. The routine below should point to the operating system
+| handler for access error exceptions. The exception stack frame is an
+| 8-word access error frame.
+|
+| The sample routine below simply executes an "rte" instruction which
+| is most likely the incorrect thing to do and could put the system
+| into an infinite loop.
+|
+ .global _060_real_access
+_060_real_access:
+ bral buserr
+
+
+
+| Execption handling for movs access to illegal memory
+ .section .fixup,#alloc,#execinstr
+ .even
+1: moveq #-1,%d1
+ rts
+.section __ex_table,#alloc
+ .align 4
+ .long dmrbuae,1b
+ .long dmrwuae,1b
+ .long dmrluae,1b
+ .long dmwbuae,1b
+ .long dmwwuae,1b
+ .long dmwluae,1b
+ .long copyoutae,1b
+ .long copyinae,1b
+ .text