Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
new file mode 100644
index 0000000..02b626b
--- /dev/null
+++ b/arch/m68k/q40/config.c
@@ -0,0 +1,365 @@
+/*
+ * arch/m68k/q40/config.c
+ *
+ * Copyright (C) 1999 Richard Zidlicky
+ *
+ * originally based on:
+ *
+ * linux/bvme/config.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file README.legal in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/serial_reg.h>
+#include <linux/rtc.h>
+#include <linux/vt_kern.h>
+
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <asm/bootinfo.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/q40_master.h>
+
+extern void floppy_setup(char *str, int *ints);
+
+extern irqreturn_t q40_process_int (int level, struct pt_regs *regs);
+extern irqreturn_t (*q40_default_handler[]) (int, void *, struct pt_regs *); /* added just for debugging */
+extern void q40_init_IRQ (void);
+extern void q40_free_irq (unsigned int, void *);
+extern int show_q40_interrupts (struct seq_file *, void *);
+extern void q40_enable_irq (unsigned int);
+extern void q40_disable_irq (unsigned int);
+static void q40_get_model(char *model);
+static int q40_get_hardware_list(char *buffer);
+extern int q40_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname, void *dev_id);
+extern void q40_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+
+extern unsigned long q40_gettimeoffset (void);
+extern int q40_hwclk (int, struct rtc_time *);
+extern unsigned int q40_get_ss (void);
+extern int q40_set_clock_mmss (unsigned long);
+static int q40_get_rtc_pll(struct rtc_pll_info *pll);
+static int q40_set_rtc_pll(struct rtc_pll_info *pll);
+extern void q40_reset (void);
+void q40_halt(void);
+extern void q40_waitbut(void);
+void q40_set_vectors (void);
+
+extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/ );
+
+extern char m68k_debug_device[];
+static void q40_mem_console_write(struct console *co, const char *b,
+ unsigned int count);
+
+extern int ql_ticks;
+
+static struct console q40_console_driver = {
+ .name = "debug",
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+
+/* early debugging function:*/
+extern char *q40_mem_cptr; /*=(char *)0xff020000;*/
+static int _cpleft;
+
+static void q40_mem_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ char *p=(char *)s;
+
+ if (count<_cpleft)
+ while (count-- >0){
+ *q40_mem_cptr=*p++;
+ q40_mem_cptr+=4;
+ _cpleft--;
+ }
+}
+#if 0
+void printq40(char *str)
+{
+ int l=strlen(str);
+ char *p=q40_mem_cptr;
+
+ while (l-- >0 && _cpleft-- >0)
+ {
+ *p=*str++;
+ p+=4;
+ }
+ q40_mem_cptr=p;
+}
+#endif
+
+static int halted=0;
+
+#ifdef CONFIG_HEARTBEAT
+static void q40_heartbeat(int on)
+{
+ if (halted) return;
+
+ if (on)
+ Q40_LED_ON();
+ else
+ Q40_LED_OFF();
+}
+#endif
+
+void q40_reset(void)
+{
+ halted=1;
+ printk ("\n\n*******************************************\n"
+ "Called q40_reset : press the RESET button!! \n"
+ "*******************************************\n");
+ Q40_LED_ON();
+ while(1) ;
+}
+void q40_halt(void)
+{
+ halted=1;
+ printk ("\n\n*******************\n"
+ " Called q40_halt\n"
+ "*******************\n");
+ Q40_LED_ON();
+ while(1) ;
+}
+
+static void q40_get_model(char *model)
+{
+ sprintf(model, "Q40");
+}
+
+/* No hardware options on Q40? */
+
+static int q40_get_hardware_list(char *buffer)
+{
+ *buffer = '\0';
+ return 0;
+}
+
+static unsigned int serports[]={0x3f8,0x2f8,0x3e8,0x2e8,0};
+void q40_disable_irqs(void)
+{
+ unsigned i,j;
+
+ j=0;
+ while((i=serports[j++])) outb(0,i+UART_IER);
+ master_outb(0,EXT_ENABLE_REG);
+ master_outb(0,KEY_IRQ_ENABLE_REG);
+}
+
+void __init config_q40(void)
+{
+ mach_sched_init = q40_sched_init;
+
+ mach_init_IRQ = q40_init_IRQ;
+ mach_gettimeoffset = q40_gettimeoffset;
+ mach_hwclk = q40_hwclk;
+ mach_get_ss = q40_get_ss;
+ mach_get_rtc_pll = q40_get_rtc_pll;
+ mach_set_rtc_pll = q40_set_rtc_pll;
+ mach_set_clock_mmss = q40_set_clock_mmss;
+
+ mach_reset = q40_reset;
+ mach_free_irq = q40_free_irq;
+ mach_process_int = q40_process_int;
+ mach_get_irq_list = show_q40_interrupts;
+ mach_request_irq = q40_request_irq;
+ enable_irq = q40_enable_irq;
+ disable_irq = q40_disable_irq;
+ mach_default_handler = &q40_default_handler;
+ mach_get_model = q40_get_model;
+ mach_get_hardware_list = q40_get_hardware_list;
+
+#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
+ mach_beep = q40_mksound;
+#endif
+#ifdef CONFIG_HEARTBEAT
+ mach_heartbeat = q40_heartbeat;
+#endif
+ mach_halt = q40_halt;
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
+ /* disable a few things that SMSQ might have left enabled */
+ q40_disable_irqs();
+
+ /* no DMA at all, but ide-scsi requires it.. make sure
+ * all physical RAM fits into the boundary - otherwise
+ * allocator may play costly and useless tricks */
+ mach_max_dma_address = 1024*1024*1024;
+
+ /* useful for early debugging stages - writes kernel messages into SRAM */
+ if (!strncmp( m68k_debug_device,"mem",3 ))
+ {
+ /*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
+ _cpleft=2000-((long)q40_mem_cptr-0xff020000)/4;
+ q40_console_driver.write = q40_mem_console_write;
+ register_console(&q40_console_driver);
+ }
+}
+
+
+int q40_parse_bootinfo(const struct bi_record *rec)
+{
+ return 1;
+}
+
+
+static inline unsigned char bcd2bin (unsigned char b)
+{
+ return ((b>>4)*10 + (b&15));
+}
+
+static inline unsigned char bin2bcd (unsigned char b)
+{
+ return (((b/10)*16) + (b%10));
+}
+
+
+unsigned long q40_gettimeoffset (void)
+{
+ return 5000*(ql_ticks!=0);
+}
+
+
+/*
+ * Looks like op is non-zero for setting the clock, and zero for
+ * reading the clock.
+ *
+ * struct hwclk_time {
+ * unsigned sec; 0..59
+ * unsigned min; 0..59
+ * unsigned hour; 0..23
+ * unsigned day; 1..31
+ * unsigned mon; 0..11
+ * unsigned year; 00...
+ * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set
+ * };
+ */
+
+int q40_hwclk(int op, struct rtc_time *t)
+{
+ if (op)
+ { /* Write.... */
+ Q40_RTC_CTRL |= Q40_RTC_WRITE;
+
+ Q40_RTC_SECS = bin2bcd(t->tm_sec);
+ Q40_RTC_MINS = bin2bcd(t->tm_min);
+ Q40_RTC_HOUR = bin2bcd(t->tm_hour);
+ Q40_RTC_DATE = bin2bcd(t->tm_mday);
+ Q40_RTC_MNTH = bin2bcd(t->tm_mon + 1);
+ Q40_RTC_YEAR = bin2bcd(t->tm_year%100);
+ if (t->tm_wday >= 0)
+ Q40_RTC_DOW = bin2bcd(t->tm_wday+1);
+
+ Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
+ }
+ else
+ { /* Read.... */
+ Q40_RTC_CTRL |= Q40_RTC_READ;
+
+ t->tm_year = bcd2bin (Q40_RTC_YEAR);
+ t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1;
+ t->tm_mday = bcd2bin (Q40_RTC_DATE);
+ t->tm_hour = bcd2bin (Q40_RTC_HOUR);
+ t->tm_min = bcd2bin (Q40_RTC_MINS);
+ t->tm_sec = bcd2bin (Q40_RTC_SECS);
+
+ Q40_RTC_CTRL &= ~(Q40_RTC_READ);
+
+ if (t->tm_year < 70)
+ t->tm_year += 100;
+ t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
+
+ }
+
+ return 0;
+}
+
+unsigned int q40_get_ss(void)
+{
+ return bcd2bin(Q40_RTC_SECS);
+}
+
+/*
+ * Set the minutes and seconds from seconds value 'nowtime'. Fail if
+ * clock is out by > 30 minutes. Logic lifted from atari code.
+ */
+
+int q40_set_clock_mmss (unsigned long nowtime)
+{
+ int retval = 0;
+ short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+
+ int rtc_minutes;
+
+
+ rtc_minutes = bcd2bin (Q40_RTC_MINS);
+
+ if ((rtc_minutes < real_minutes
+ ? real_minutes - rtc_minutes
+ : rtc_minutes - real_minutes) < 30)
+ {
+ Q40_RTC_CTRL |= Q40_RTC_WRITE;
+ Q40_RTC_MINS = bin2bcd(real_minutes);
+ Q40_RTC_SECS = bin2bcd(real_seconds);
+ Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
+ }
+ else
+ retval = -1;
+
+
+ return retval;
+}
+
+
+/* get and set PLL calibration of RTC clock */
+#define Q40_RTC_PLL_MASK ((1<<5)-1)
+#define Q40_RTC_PLL_SIGN (1<<5)
+
+static int q40_get_rtc_pll(struct rtc_pll_info *pll)
+{
+ int tmp=Q40_RTC_CTRL;
+ pll->pll_value = tmp & Q40_RTC_PLL_MASK;
+ if (tmp & Q40_RTC_PLL_SIGN)
+ pll->pll_value = -pll->pll_value;
+ pll->pll_max=31;
+ pll->pll_min=-31;
+ pll->pll_posmult=512;
+ pll->pll_negmult=256;
+ pll->pll_clock=125829120;
+ return 0;
+}
+
+static int q40_set_rtc_pll(struct rtc_pll_info *pll)
+{
+ if (!pll->pll_ctrl){
+ /* the docs are a bit unclear so I am doublesetting */
+ /* RTC_WRITE here ... */
+ int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) |
+ Q40_RTC_WRITE;
+ Q40_RTC_CTRL |= Q40_RTC_WRITE;
+ Q40_RTC_CTRL = tmp;
+ Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
+ return 0;
+ } else
+ return -EINVAL;
+}