Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/ddb5xxx/common/Makefile b/arch/mips/ddb5xxx/common/Makefile
new file mode 100644
index 0000000..bc44e30
--- /dev/null
+++ b/arch/mips/ddb5xxx/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the common code of NEC DDB-Vrc5xxx board
+#
+
+obj-y += nile4.o prom.o rtc_ds1386.o
diff --git a/arch/mips/ddb5xxx/common/nile4.c b/arch/mips/ddb5xxx/common/nile4.c
new file mode 100644
index 0000000..7ec7d90
--- /dev/null
+++ b/arch/mips/ddb5xxx/common/nile4.c
@@ -0,0 +1,130 @@
+/*
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/ddb5xxx/common/nile4.c
+ * misc low-level routines for vrc-5xxx controllers.
+ *
+ * derived from original code by Geert Uytterhoeven <geert@sonycom.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+u32
+ddb_calc_pdar(u32 phys, u32 size, int width,
+ int on_memory_bus, int pci_visible)
+{
+ u32 maskbits;
+ u32 widthbits;
+
+ switch (size) {
+#if 0 /* We don't support 4 GB yet */
+ case 0x100000000: /* 4 GB */
+ maskbits = 4;
+ break;
+#endif
+ case 0x80000000: /* 2 GB */
+ maskbits = 5;
+ break;
+ case 0x40000000: /* 1 GB */
+ maskbits = 6;
+ break;
+ case 0x20000000: /* 512 MB */
+ maskbits = 7;
+ break;
+ case 0x10000000: /* 256 MB */
+ maskbits = 8;
+ break;
+ case 0x08000000: /* 128 MB */
+ maskbits = 9;
+ break;
+ case 0x04000000: /* 64 MB */
+ maskbits = 10;
+ break;
+ case 0x02000000: /* 32 MB */
+ maskbits = 11;
+ break;
+ case 0x01000000: /* 16 MB */
+ maskbits = 12;
+ break;
+ case 0x00800000: /* 8 MB */
+ maskbits = 13;
+ break;
+ case 0x00400000: /* 4 MB */
+ maskbits = 14;
+ break;
+ case 0x00200000: /* 2 MB */
+ maskbits = 15;
+ break;
+ case 0: /* OFF */
+ maskbits = 0;
+ break;
+ default:
+ panic("nile4_set_pdar: unsupported size %p", (void *) size);
+ }
+ switch (width) {
+ case 8:
+ widthbits = 0;
+ break;
+ case 16:
+ widthbits = 1;
+ break;
+ case 32:
+ widthbits = 2;
+ break;
+ case 64:
+ widthbits = 3;
+ break;
+ default:
+ panic("nile4_set_pdar: unsupported width %d", width);
+ }
+
+ return maskbits | (on_memory_bus ? 0x10 : 0) |
+ (pci_visible ? 0x20 : 0) | (widthbits << 6) |
+ (phys & 0xffe00000);
+}
+
+void
+ddb_set_pdar(u32 pdar, u32 phys, u32 size, int width,
+ int on_memory_bus, int pci_visible)
+{
+ u32 temp= ddb_calc_pdar(phys, size, width, on_memory_bus, pci_visible);
+ ddb_out32(pdar, temp);
+ ddb_out32(pdar + 4, 0);
+
+ /*
+ * When programming a PDAR, the register should be read immediately
+ * after writing it. This ensures that address decoders are properly
+ * configured.
+ * [jsun] is this really necessary?
+ */
+ ddb_in32(pdar);
+ ddb_in32(pdar + 4);
+}
+
+/*
+ * routines that mess with PCIINITx registers
+ */
+
+void ddb_set_pmr(u32 pmr, u32 type, u32 addr, u32 options)
+{
+ switch (type) {
+ case DDB_PCICMD_IACK: /* PCI Interrupt Acknowledge */
+ case DDB_PCICMD_IO: /* PCI I/O Space */
+ case DDB_PCICMD_MEM: /* PCI Memory Space */
+ case DDB_PCICMD_CFG: /* PCI Configuration Space */
+ break;
+ default:
+ panic("nile4_set_pmr: invalid type %d", type);
+ }
+ ddb_out32(pmr, (type << 1) | (addr & 0xffe00000) | options );
+ ddb_out32(pmr + 4, 0);
+}
diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c
new file mode 100644
index 0000000..b8d1f74
--- /dev/null
+++ b/arch/mips/ddb5xxx/common/prom.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/ddb5xxx/ddb5xxx.h>
+#include <asm/debug.h>
+
+const char *get_system_type(void)
+{
+ switch (mips_machtype) {
+ case MACH_NEC_DDB5074: return "NEC DDB Vrc-5074";
+ case MACH_NEC_DDB5476: return "NEC DDB Vrc-5476";
+ case MACH_NEC_DDB5477: return "NEC DDB Vrc-5477";
+ case MACH_NEC_ROCKHOPPER: return "NEC Rockhopper";
+ case MACH_NEC_ROCKHOPPERII: return "NEC RockhopperII";
+ default: return "Unknown NEC board";
+ }
+}
+
+#if defined(CONFIG_DDB5477)
+void ddb5477_runtime_detection(void);
+#endif
+
+/* [jsun@junsun.net] PMON passes arguments in C main() style */
+void __init prom_init(void)
+{
+ int argc = fw_arg0;
+ char **arg = (char**) fw_arg1;
+ int i;
+
+ /* if user passes kernel args, ignore the default one */
+ if (argc > 1)
+ arcs_cmdline[0] = '\0';
+
+ /* arg[0] is "g", the rest is boot parameters */
+ for (i = 1; i < argc; i++) {
+ if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ >= sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, arg[i]);
+ strcat(arcs_cmdline, " ");
+ }
+
+ mips_machgroup = MACH_GROUP_NEC_DDB;
+
+#if defined(CONFIG_DDB5074)
+ mips_machtype = MACH_NEC_DDB5074;
+ add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM);
+#elif defined(CONFIG_DDB5476)
+ mips_machtype = MACH_NEC_DDB5476;
+ add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM);
+#elif defined(CONFIG_DDB5477)
+ ddb5477_runtime_detection();
+ add_memory_region(0, board_ram_size, BOOT_MEM_RAM);
+#endif
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
+
+#if defined(CONFIG_DDB5477)
+
+#define DEFAULT_LCS1_BASE 0x19000000
+#define TESTVAL1 'K'
+#define TESTVAL2 'S'
+
+int board_ram_size;
+void ddb5477_runtime_detection(void)
+{
+ volatile char *test_offset;
+ char saved_test_byte;
+
+ /* Determine if this is a DDB5477 board, or a BSB-VR0300
+ base board. We can tell by checking for the location of
+ the NVRAM. It lives at the beginning of LCS1 on the DDB5477,
+ and the beginning of LCS1 on the BSB-VR0300 is flash memory.
+ The first 2K of the NVRAM are reserved, so don't we'll poke
+ around just after that.
+ */
+
+ /* We can only use the PCI bus to distinquish between
+ the Rockhopper and RockhopperII backplanes and this must
+ wait until ddb5477_board_init() in setup.c after the 5477
+ is initialized. So, until then handle
+ both Rockhopper and RockhopperII backplanes as Rockhopper 1
+ */
+
+ test_offset = (char *)KSEG1ADDR(DEFAULT_LCS1_BASE + 0x800);
+ saved_test_byte = *test_offset;
+
+ *test_offset = TESTVAL1;
+ if (*test_offset != TESTVAL1) {
+ /* We couldn't set our test value, so it must not be NVRAM,
+ so it's a BSB_VR0300 */
+ mips_machtype = MACH_NEC_ROCKHOPPER;
+ } else {
+ /* We may have gotten lucky, and the TESTVAL1 was already
+ stored at the test location, so we must check a second
+ test value */
+ *test_offset = TESTVAL2;
+ if (*test_offset != TESTVAL2) {
+ /* OK, we couldn't set this value either, so it must
+ definately be a BSB_VR0300 */
+ mips_machtype = MACH_NEC_ROCKHOPPER;
+ } else {
+ /* We could change the value twice, so it must be
+ NVRAM, so it's a DDB_VRC5477 */
+ mips_machtype = MACH_NEC_DDB5477;
+ }
+ }
+ /* Restore the original byte */
+ *test_offset = saved_test_byte;
+
+ /* before we know a better way, we will trust PMON for getting
+ * RAM size
+ */
+ board_ram_size = 1 << (36 - (ddb_in32(DDB_SDRAM0) & 0xf));
+
+ db_run(printk("DDB run-time detection : %s, %d MB RAM\n",
+ mips_machtype == MACH_NEC_DDB5477 ?
+ "DDB5477" : "Rockhopper",
+ board_ram_size >> 20));
+
+ /* we can't handle ram size > 128 MB */
+ db_assert(board_ram_size <= (128 << 20));
+}
+#endif
diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c
new file mode 100644
index 0000000..f5b1150
--- /dev/null
+++ b/arch/mips/ddb5xxx/common/rtc_ds1386.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/ddb5xxx/common/rtc_ds1386.c
+ * low-level RTC hookups for s for Dallas 1396 chip.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+ * This file exports a function, rtc_ds1386_init(), which expects an
+ * uncached base address as the argument. It will set the two function
+ * pointers expected by the MIPS generic timer code.
+ */
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/bcd.h>
+
+#include <asm/time.h>
+#include <asm/addrspace.h>
+
+#include <asm/mc146818rtc.h>
+#include <asm/debug.h>
+
+#define EPOCH 2000
+
+#define READ_RTC(x) *(volatile unsigned char*)(rtc_base+x)
+#define WRITE_RTC(x, y) *(volatile unsigned char*)(rtc_base+x) = y
+
+static unsigned long rtc_base;
+
+static unsigned long
+rtc_ds1386_get_time(void)
+{
+ u8 byte;
+ u8 temp;
+ unsigned int year, month, day, hour, minute, second;
+
+ /* let us freeze external registers */
+ byte = READ_RTC(0xB);
+ byte &= 0x3f;
+ WRITE_RTC(0xB, byte);
+
+ /* read time data */
+ year = BCD2BIN(READ_RTC(0xA)) + EPOCH;
+ month = BCD2BIN(READ_RTC(0x9) & 0x1f);
+ day = BCD2BIN(READ_RTC(0x8));
+ minute = BCD2BIN(READ_RTC(0x2));
+ second = BCD2BIN(READ_RTC(0x1));
+
+ /* hour is special - deal with it later */
+ temp = READ_RTC(0x4);
+
+ /* enable time transfer */
+ byte |= 0x80;
+ WRITE_RTC(0xB, byte);
+
+ /* calc hour */
+ if (temp & 0x40) {
+ /* 12 hour format */
+ hour = BCD2BIN(temp & 0x1f);
+ if (temp & 0x20) hour += 12; /* PM */
+ } else {
+ /* 24 hour format */
+ hour = BCD2BIN(temp & 0x3f);
+ }
+
+ return mktime(year, month, day, hour, minute, second);
+}
+
+static int
+rtc_ds1386_set_time(unsigned long t)
+{
+ struct rtc_time tm;
+ u8 byte;
+ u8 temp;
+ u8 year, month, day, hour, minute, second;
+
+ /* let us freeze external registers */
+ byte = READ_RTC(0xB);
+ byte &= 0x3f;
+ WRITE_RTC(0xB, byte);
+
+ /* convert */
+ to_tm(t, &tm);
+
+
+ /* check each field one by one */
+ year = BIN2BCD(tm.tm_year - EPOCH);
+ if (year != READ_RTC(0xA)) {
+ WRITE_RTC(0xA, year);
+ }
+
+ temp = READ_RTC(0x9);
+ month = BIN2BCD(tm.tm_mon+1); /* tm_mon starts from 0 to 11 */
+ if (month != (temp & 0x1f)) {
+ WRITE_RTC( 0x9,
+ (month & 0x1f) | (temp & ~0x1f) );
+ }
+
+ day = BIN2BCD(tm.tm_mday);
+ if (day != READ_RTC(0x8)) {
+ WRITE_RTC(0x8, day);
+ }
+
+ temp = READ_RTC(0x4);
+ if (temp & 0x40) {
+ /* 12 hour format */
+ hour = 0x40;
+ if (tm.tm_hour > 12) {
+ hour |= 0x20 | (BIN2BCD(hour-12) & 0x1f);
+ } else {
+ hour |= BIN2BCD(tm.tm_hour);
+ }
+ } else {
+ /* 24 hour format */
+ hour = BIN2BCD(tm.tm_hour) & 0x3f;
+ }
+ if (hour != temp) WRITE_RTC(0x4, hour);
+
+ minute = BIN2BCD(tm.tm_min);
+ if (minute != READ_RTC(0x2)) {
+ WRITE_RTC(0x2, minute);
+ }
+
+ second = BIN2BCD(tm.tm_sec);
+ if (second != READ_RTC(0x1)) {
+ WRITE_RTC(0x1, second);
+ }
+
+ return 0;
+}
+
+void
+rtc_ds1386_init(unsigned long base)
+{
+ unsigned char byte;
+
+ /* remember the base */
+ rtc_base = base;
+ db_assert((rtc_base & 0xe0000000) == KSEG1);
+
+ /* turn on RTC if it is not on */
+ byte = READ_RTC(0x9);
+ if (byte & 0x80) {
+ byte &= 0x7f;
+ WRITE_RTC(0x9, byte);
+ }
+
+ /* enable time transfer */
+ byte = READ_RTC(0xB);
+ byte |= 0x80;
+ WRITE_RTC(0xB, byte);
+
+ /* set the function pointers */
+ rtc_get_time = rtc_ds1386_get_time;
+ rtc_set_time = rtc_ds1386_set_time;
+}
diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile
new file mode 100644
index 0000000..488206b
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5074/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the NEC DDB Vrc-5074 specific kernel interface routines
+# under Linux.
+#
+
+obj-y += setup.o irq.o int-handler.o nile4_pic.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ddb5xxx/ddb5074/int-handler.S b/arch/mips/ddb5xxx/ddb5074/int-handler.S
new file mode 100644
index 0000000..a786441
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5074/int-handler.S
@@ -0,0 +1,120 @@
+/*
+ * arch/mips/ddb5074/int-handler.S -- NEC DDB Vrc-5074 interrupt handler
+ *
+ * Based on arch/mips/sgi/kernel/indyIRQ.S
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/* A lot of complication here is taken away because:
+ *
+ * 1) We handle one interrupt and return, sitting in a loop and moving across
+ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
+ * common case is one pending IRQ so optimize in that direction.
+ *
+ * 2) We need not check against bits in the status register IRQ mask, that
+ * would make this routine slow as hell.
+ *
+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
+ * between like BSD spl() brain-damage.
+ *
+ * Furthermore, the IRQs on the INDY look basically (barring software IRQs
+ * which we don't use at all) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Local IRQ level zero
+ * 3 Local IRQ level one
+ * 4 8254 Timer zero
+ * 5 8254 Timer one
+ * 6 Bus Error
+ * 7 R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Local IRQ zero
+ * Local IRQ one
+ * Bus Error
+ * 8254 Timer zero
+ * Lowest ---- 8254 Timer one
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(ddbIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ mfc0 s0, CP0_CAUSE # get irq mask
+
+#if 1
+ mfc0 t2,CP0_STATUS # get enabled interrupts
+ and s0,t2 # isolate allowed ones
+#endif
+ /* First we check for r4k counter/timer IRQ. */
+ andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP3 # delay slot, check local level one
+
+ /* Wheee, local level zero interrupt. */
+ jal ddb_local0_irqdispatch
+ move a0, sp # delay slot
+
+ j ret_from_irq
+ nop # delay slot
+
+1:
+ beq a0, zero, 1f
+ andi a0, s0, CAUSEF_IP6 # delay slot, check bus error
+
+ /* Wheee, local level one interrupt. */
+ move a0, sp
+ jal ddb_local1_irqdispatch
+ nop
+
+ j ret_from_irq
+ nop
+
+1:
+ beq a0, zero, 1f
+ nop
+
+ /* Wheee, an asynchronous bus error... */
+ move a0, sp
+ jal ddb_buserror_irq
+ nop
+
+ j ret_from_irq
+ nop
+
+1:
+ /* Here by mistake? This is possible, what can happen
+ * is that by the time we take the exception the IRQ
+ * pin goes low, so just leave if this is the case.
+ */
+ andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5)
+ beq a0, zero, 1f
+
+ /* Must be one of the 8254 timers... */
+ move a0, sp
+ jal ddb_8254timer_irq
+ nop
+1:
+ j ret_from_irq
+ nop
+ END(ddbIRQ)
diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c
new file mode 100644
index 0000000..45088a1
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5074/irq.c
@@ -0,0 +1,159 @@
+/*
+ * arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/i8259.h>
+#include <asm/io.h>
+#include <asm/irq_cpu.h>
+#include <asm/ptrace.h>
+#include <asm/nile4.h>
+#include <asm/ddb5xxx/ddb5xxx.h>
+#include <asm/ddb5xxx/ddb5074.h>
+
+
+extern asmlinkage void ddbIRQ(void);
+
+static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
+
+#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
+#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
+#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */
+
+#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */
+#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */
+#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */
+
+#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */
+#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */
+
+#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */
+#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */
+
+#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */
+#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */
+
+
+static void m1543_irq_setup(void)
+{
+ /*
+ * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all
+ * the possible IO sources in the M1543 are in use by us. We will
+ * use the following mapping:
+ *
+ * IRQ1 - keyboard (default set by M1543)
+ * IRQ3 - reserved for UART B (default set by M1543) (note that
+ * the schematics for the DDB Vrc-5074 board seem to
+ * indicate that IRQ3 is connected to the DS1386
+ * watchdog timer interrupt output so we might have
+ * a conflict)
+ * IRQ4 - reserved for UART A (default set by M1543)
+ * IRQ5 - parallel (default set by M1543)
+ * IRQ8 - DS1386 time of day (RTC) interrupt
+ * IRQ12 - mouse
+ */
+
+ /*
+ * Assing mouse interrupt to IRQ12
+ */
+
+ /* Enter configuration mode */
+ outb(0x51, M1543_PNP_CONFIG);
+ outb(0x23, M1543_PNP_CONFIG);
+
+ /* Select logical device 7 (Keyboard) */
+ outb(0x07, M1543_PNP_INDEX);
+ outb(0x07, M1543_PNP_DATA);
+
+ /* Select IRQ12 */
+ outb(0x72, M1543_PNP_INDEX);
+ outb(0x0c, M1543_PNP_DATA);
+
+ outb(0x30, M1543_PNP_INDEX);
+ printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA));
+
+ outb(0x70, M1543_PNP_INDEX);
+ printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA));
+
+ /* Leave configration mode */
+ outb(0xbb, M1543_PNP_CONFIG);
+
+
+}
+
+void ddb_local0_irqdispatch(struct pt_regs *regs)
+{
+ u32 mask;
+ int nile4_irq;
+
+ mask = nile4_get_irq_stat(0);
+
+ /* Handle the timer interrupt first */
+#if 0
+ if (mask & (1 << NILE4_INT_GPT)) {
+ do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs);
+ mask &= ~(1 << NILE4_INT_GPT);
+ }
+#endif
+ for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1)
+ if (mask & 1) {
+ if (nile4_irq == NILE4_INT_INTE) {
+ int i8259_irq;
+
+ nile4_clear_irq(NILE4_INT_INTE);
+ i8259_irq = nile4_i8259_iack();
+ do_IRQ(i8259_irq, regs);
+ } else
+ do_IRQ(nile4_to_irq(nile4_irq), regs);
+
+ }
+}
+
+void ddb_local1_irqdispatch(void)
+{
+ printk("ddb_local1_irqdispatch called\n");
+}
+
+void ddb_buserror_irq(void)
+{
+ printk("ddb_buserror_irq called\n");
+}
+
+void ddb_8254timer_irq(void)
+{
+ printk("ddb_8254timer_irq called\n");
+}
+
+void __init arch_init_irq(void)
+{
+ /* setup cascade interrupts */
+ setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade);
+ setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
+
+ set_except_vector(0, ddbIRQ);
+
+ nile4_irq_setup(NILE4_IRQ_BASE);
+ m1543_irq_setup();
+ init_i8259_irqs();
+
+
+ printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE);
+
+ mips_cpu_irq_init(CPU_IRQ_BASE);
+
+ printk("enabling 8259 cascade\n");
+
+ ddb5074_led_hex(0);
+
+ /* Enable the interrupt cascade */
+ nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE);
+}
diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
new file mode 100644
index 0000000..68c127c
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
@@ -0,0 +1,287 @@
+/*
+ * arch/mips/ddb5476/nile4.c --
+ * low-level PIC code for NEC Vrc-5476 (Nile 4)
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+static int irq_base;
+
+/*
+ * Interrupt Programming
+ */
+void nile4_map_irq(int nile4_irq, int cpu_irq)
+{
+ u32 offset, t;
+
+ offset = DDB_INTCTRL;
+ if (nile4_irq >= 8) {
+ offset += 4;
+ nile4_irq -= 8;
+ }
+ t = ddb_in32(offset);
+ t &= ~(7 << (nile4_irq * 4));
+ t |= cpu_irq << (nile4_irq * 4);
+ ddb_out32(offset, t);
+}
+
+void nile4_map_irq_all(int cpu_irq)
+{
+ u32 all, t;
+
+ all = cpu_irq;
+ all |= all << 4;
+ all |= all << 8;
+ all |= all << 16;
+ t = ddb_in32(DDB_INTCTRL);
+ t &= 0x88888888;
+ t |= all;
+ ddb_out32(DDB_INTCTRL, t);
+ t = ddb_in32(DDB_INTCTRL + 4);
+ t &= 0x88888888;
+ t |= all;
+ ddb_out32(DDB_INTCTRL + 4, t);
+}
+
+void nile4_enable_irq(unsigned int nile4_irq)
+{
+ u32 offset, t;
+
+ nile4_irq-=irq_base;
+
+ ddb5074_led_hex(8);
+
+ offset = DDB_INTCTRL;
+ if (nile4_irq >= 8) {
+ offset += 4;
+ nile4_irq -= 8;
+ }
+ ddb5074_led_hex(9);
+ t = ddb_in32(offset);
+ ddb5074_led_hex(0xa);
+ t |= 8 << (nile4_irq * 4);
+ ddb_out32(offset, t);
+ ddb5074_led_hex(0xb);
+}
+
+void nile4_disable_irq(unsigned int nile4_irq)
+{
+ u32 offset, t;
+
+ nile4_irq-=irq_base;
+
+ offset = DDB_INTCTRL;
+ if (nile4_irq >= 8) {
+ offset += 4;
+ nile4_irq -= 8;
+ }
+ t = ddb_in32(offset);
+ t &= ~(8 << (nile4_irq * 4));
+ ddb_out32(offset, t);
+}
+
+void nile4_disable_irq_all(void)
+{
+ ddb_out32(DDB_INTCTRL, 0);
+ ddb_out32(DDB_INTCTRL + 4, 0);
+}
+
+u16 nile4_get_irq_stat(int cpu_irq)
+{
+ return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2);
+}
+
+void nile4_enable_irq_output(int cpu_irq)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTSTAT1 + 4);
+ t |= 1 << (16 + cpu_irq);
+ ddb_out32(DDB_INTSTAT1, t);
+}
+
+void nile4_disable_irq_output(int cpu_irq)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTSTAT1 + 4);
+ t &= ~(1 << (16 + cpu_irq));
+ ddb_out32(DDB_INTSTAT1, t);
+}
+
+void nile4_set_pci_irq_polarity(int pci_irq, int high)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTPPES);
+ if (high)
+ t &= ~(1 << (pci_irq * 2));
+ else
+ t |= 1 << (pci_irq * 2);
+ ddb_out32(DDB_INTPPES, t);
+}
+
+void nile4_set_pci_irq_level_or_edge(int pci_irq, int level)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTPPES);
+ if (level)
+ t |= 2 << (pci_irq * 2);
+ else
+ t &= ~(2 << (pci_irq * 2));
+ ddb_out32(DDB_INTPPES, t);
+}
+
+void nile4_clear_irq(int nile4_irq)
+{
+ nile4_irq-=irq_base;
+ ddb_out32(DDB_INTCLR, 1 << nile4_irq);
+}
+
+void nile4_clear_irq_mask(u32 mask)
+{
+ ddb_out32(DDB_INTCLR, mask);
+}
+
+u8 nile4_i8259_iack(void)
+{
+ u8 irq;
+ u32 reg;
+
+ /* Set window 0 for interrupt acknowledge */
+ reg = ddb_in32(DDB_PCIINIT0);
+
+ ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
+ irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
+ /* restore window 0 for PCI I/O space */
+ // ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
+ ddb_out32(DDB_PCIINIT0, reg);
+
+ /* i8269.c set the base vector to be 0x0 */
+ return irq ;
+}
+
+static unsigned int nile4_irq_startup(unsigned int irq) {
+
+ nile4_enable_irq(irq);
+ return 0;
+
+}
+
+static void nile4_ack_irq(unsigned int irq) {
+
+ ddb5074_led_hex(4);
+
+ nile4_clear_irq(irq);
+ ddb5074_led_hex(2);
+ nile4_disable_irq(irq);
+
+ ddb5074_led_hex(0);
+}
+
+static void nile4_irq_end(unsigned int irq) {
+
+ ddb5074_led_hex(3);
+ if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ ddb5074_led_hex(5);
+ nile4_enable_irq(irq);
+ ddb5074_led_hex(7);
+ }
+
+ ddb5074_led_hex(1);
+}
+
+#define nile4_irq_shutdown nile4_disable_irq
+
+static hw_irq_controller nile4_irq_controller = {
+ "nile4",
+ nile4_irq_startup,
+ nile4_irq_shutdown,
+ nile4_enable_irq,
+ nile4_disable_irq,
+ nile4_ack_irq,
+ nile4_irq_end,
+ NULL
+};
+
+void nile4_irq_setup(u32 base) {
+
+ int i;
+
+ irq_base=base;
+
+ /* Map all interrupts to CPU int #0 */
+ nile4_map_irq_all(0);
+
+ /* PCI INTA#-E# must be level triggered */
+ nile4_set_pci_irq_level_or_edge(0, 1);
+ nile4_set_pci_irq_level_or_edge(1, 1);
+ nile4_set_pci_irq_level_or_edge(2, 1);
+ nile4_set_pci_irq_level_or_edge(3, 1);
+ nile4_set_pci_irq_level_or_edge(4, 1);
+
+ /* PCI INTA#-D# must be active low, INTE# must be active high */
+ nile4_set_pci_irq_polarity(0, 0);
+ nile4_set_pci_irq_polarity(1, 0);
+ nile4_set_pci_irq_polarity(2, 0);
+ nile4_set_pci_irq_polarity(3, 0);
+ nile4_set_pci_irq_polarity(4, 1);
+
+
+ for (i = 0; i < 16; i++) {
+ nile4_clear_irq(i);
+ nile4_disable_irq(i);
+ }
+
+ /* Enable CPU int #0 */
+ nile4_enable_irq_output(0);
+
+ for (i= base; i< base + NUM_NILE4_INTERRUPTS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &nile4_irq_controller;
+ }
+}
+
+#if defined(CONFIG_RUNTIME_DEBUG)
+void nile4_dump_irq_status(void)
+{
+ printk(KERN_DEBUG "
+ CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4),
+ (void *) ddb_in32(DDB_CPUSTAT));
+ printk(KERN_DEBUG "
+ INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4),
+ (void *) ddb_in32(DDB_INTCTRL));
+ printk(KERN_DEBUG
+ "INTSTAT0 = %p:%p\n",
+ (void *) ddb_in32(DDB_INTSTAT0 + 4),
+ (void *) ddb_in32(DDB_INTSTAT0));
+ printk(KERN_DEBUG
+ "INTSTAT1 = %p:%p\n",
+ (void *) ddb_in32(DDB_INTSTAT1 + 4),
+ (void *) ddb_in32(DDB_INTSTAT1));
+ printk(KERN_DEBUG
+ "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4),
+ (void *) ddb_in32(DDB_INTCLR));
+ printk(KERN_DEBUG
+ "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4),
+ (void *) ddb_in32(DDB_INTPPES));
+}
+
+#endif
diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c
new file mode 100644
index 0000000..a73a597
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5074/setup.c
@@ -0,0 +1,235 @@
+/*
+ * arch/mips/ddb5074/setup.c -- NEC DDB Vrc-5074 setup routines
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ */
+#include <linux/init.h>
+#include <linux/kbd_ll.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+
+#include <asm/addrspace.h>
+#include <asm/bcache.h>
+#include <asm/irq.h>
+#include <asm/reboot.h>
+#include <asm/gdb-stub.h>
+#include <asm/time.h>
+#include <asm/nile4.h>
+#include <asm/ddb5xxx/ddb5074.h>
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
+
+static void ddb_machine_restart(char *command)
+{
+ u32 t;
+
+ /* PCI cold reset */
+ t = nile4_in32(NILE4_PCICTRL + 4);
+ t |= 0x40000000;
+ nile4_out32(NILE4_PCICTRL + 4, t);
+ /* CPU cold reset */
+ t = nile4_in32(NILE4_CPUSTAT);
+ t |= 1;
+ nile4_out32(NILE4_CPUSTAT, t);
+ /* Call the PROM */
+ back_to_prom();
+}
+
+static void ddb_machine_halt(void)
+{
+ printk("DDB Vrc-5074 halted.\n");
+ do {
+ } while (1);
+}
+
+static void ddb_machine_power_off(void)
+{
+ printk("DDB Vrc-5074 halted. Please turn off the power.\n");
+ do {
+ } while (1);
+}
+
+extern void rtc_ds1386_init(unsigned long base);
+
+extern void (*board_timer_setup) (struct irqaction * irq);
+
+static void __init ddb_timer_init(struct irqaction *irq)
+{
+ /* set the clock to 1 Hz */
+ nile4_out32(NILE4_T2CTRL, 1000000);
+ /* enable the General-Purpose Timer */
+ nile4_out32(NILE4_T2CTRL + 4, 0x00000001);
+ /* reset timer */
+ nile4_out32(NILE4_T2CNTR, 0);
+ /* enable interrupt */
+ setup_irq(nile4_to_irq(NILE4_INT_GPT), irq);
+ nile4_enable_irq(nile4_to_irq(NILE4_INT_GPT));
+ change_c0_status(ST0_IM,
+ IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);
+
+}
+
+static void __init ddb_time_init(void)
+{
+ /* we have ds1396 RTC chip */
+ rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE));
+}
+
+
+
+static void __init ddb5074_setup(void)
+{
+ set_io_port_base(NILE4_PCI_IO_BASE);
+ isa_slot_offset = NILE4_PCI_MEM_BASE;
+ board_timer_setup = ddb_timer_init;
+ board_time_init = ddb_time_init;
+
+
+ _machine_restart = ddb_machine_restart;
+ _machine_halt = ddb_machine_halt;
+ _machine_power_off = ddb_machine_power_off;
+
+ ddb_out32(DDB_BAR0, 0);
+
+ ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, 0x10);
+ ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE , 0x10);
+
+ /* Reboot on panic */
+ panic_timeout = 180;
+}
+
+early_initcall(ddb5074_setup);
+
+#define USE_NILE4_SERIAL 0
+
+#if USE_NILE4_SERIAL
+#define ns16550_in(reg) nile4_in8((reg)*8)
+#define ns16550_out(reg, val) nile4_out8((reg)*8, (val))
+#else
+#define NS16550_BASE (NILE4_PCI_IO_BASE+0x03f8)
+static inline u8 ns16550_in(u32 reg)
+{
+ return *(volatile u8 *) (NS16550_BASE + reg);
+}
+
+static inline void ns16550_out(u32 reg, u8 val)
+{
+ *(volatile u8 *) (NS16550_BASE + reg) = val;
+}
+#endif
+
+#define NS16550_RBR 0
+#define NS16550_THR 0
+#define NS16550_DLL 0
+#define NS16550_IER 1
+#define NS16550_DLM 1
+#define NS16550_FCR 2
+#define NS16550_IIR 2
+#define NS16550_LCR 3
+#define NS16550_MCR 4
+#define NS16550_LSR 5
+#define NS16550_MSR 6
+#define NS16550_SCR 7
+
+#define NS16550_LSR_DR 0x01 /* Data ready */
+#define NS16550_LSR_OE 0x02 /* Overrun */
+#define NS16550_LSR_PE 0x04 /* Parity error */
+#define NS16550_LSR_FE 0x08 /* Framing error */
+#define NS16550_LSR_BI 0x10 /* Break */
+#define NS16550_LSR_THRE 0x20 /* Xmit holding register empty */
+#define NS16550_LSR_TEMT 0x40 /* Xmitter empty */
+#define NS16550_LSR_ERR 0x80 /* Error */
+
+
+void _serinit(void)
+{
+#if USE_NILE4_SERIAL
+ ns16550_out(NS16550_LCR, 0x80);
+ ns16550_out(NS16550_DLM, 0x00);
+ ns16550_out(NS16550_DLL, 0x36); /* 9600 baud */
+ ns16550_out(NS16550_LCR, 0x00);
+ ns16550_out(NS16550_LCR, 0x03);
+ ns16550_out(NS16550_FCR, 0x47);
+#else
+ /* done by PMON */
+#endif
+}
+
+void _putc(char c)
+{
+ while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE));
+ ns16550_out(NS16550_THR, c);
+ if (c == '\n') {
+ while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE));
+ ns16550_out(NS16550_THR, '\r');
+ }
+}
+
+void _puts(const char *s)
+{
+ char c;
+ while ((c = *s++))
+ _putc(c);
+}
+
+char _getc(void)
+{
+ while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_DR));
+ return ns16550_in(NS16550_RBR);
+}
+
+int _testc(void)
+{
+ return (ns16550_in(NS16550_LSR) & NS16550_LSR_DR) != 0;
+}
+
+
+/*
+ * Hexadecimal 7-segment LED
+ */
+void ddb5074_led_hex(int hex)
+{
+ outb(hex, 0x80);
+}
+
+
+/*
+ * LEDs D2 and D3, connected to the GPIO pins of the PMU in the ALi M1543
+ */
+struct pci_dev *pci_pmu = NULL;
+
+void ddb5074_led_d2(int on)
+{
+ u8 t;
+
+ if (pci_pmu) {
+ pci_read_config_byte(pci_pmu, 0x7e, &t);
+ if (on)
+ t &= 0x7f;
+ else
+ t |= 0x80;
+ pci_write_config_byte(pci_pmu, 0x7e, t);
+ }
+}
+
+void ddb5074_led_d3(int on)
+{
+ u8 t;
+
+ if (pci_pmu) {
+ pci_read_config_byte(pci_pmu, 0x7e, &t);
+ if (on)
+ t &= 0xbf;
+ else
+ t |= 0x40;
+ pci_write_config_byte(pci_pmu, 0x7e, t);
+ }
+}
diff --git a/arch/mips/ddb5xxx/ddb5476/Makefile b/arch/mips/ddb5xxx/ddb5476/Makefile
new file mode 100644
index 0000000..61eec36
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5476/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the NEC DDB Vrc-5476 specific kernel interface routines
+# under Linux.
+#
+
+obj-y += setup.o irq.o int-handler.o nile4_pic.o vrc5476_irq.o
+obj-$(CONFIG_KGDB) += dbg_io.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
new file mode 100644
index 0000000..85e9e50
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@@ -0,0 +1,136 @@
+/*
+ * kgdb io functions for DDB5476. We use the second serial port.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+/* ======================= CONFIG ======================== */
+
+/* [jsun] we use the second serial port for kdb */
+#define BASE 0xa60002f8
+#define MAX_BAUD 115200
+
+/* distance in bytes between two serial registers */
+#define REG_OFFSET 1
+
+/*
+ * 0 - kgdb does serial init
+ * 1 - kgdb skip serial init
+ */
+static int remoteDebugInitialized = 0;
+
+/*
+ * the default baud rate *if* kgdb does serial init
+ */
+#define BAUD_DEFAULT UART16550_BAUD_38400
+
+/* ======================= END OF CONFIG ======================== */
+
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+#define UART16550_BAUD_2400 2400
+#define UART16550_BAUD_4800 4800
+#define UART16550_BAUD_9600 9600
+#define UART16550_BAUD_19200 19200
+#define UART16550_BAUD_38400 38400
+#define UART16550_BAUD_57600 57600
+#define UART16550_BAUD_115200 115200
+
+#define UART16550_PARITY_NONE 0
+#define UART16550_PARITY_ODD 0x08
+#define UART16550_PARITY_EVEN 0x18
+#define UART16550_PARITY_MARK 0x28
+#define UART16550_PARITY_SPACE 0x38
+
+#define UART16550_DATA_5BIT 0x0
+#define UART16550_DATA_6BIT 0x1
+#define UART16550_DATA_7BIT 0x2
+#define UART16550_DATA_8BIT 0x3
+
+#define UART16550_STOP_1BIT 0x0
+#define UART16550_STOP_2BIT 0x4
+
+/* register offset */
+#define OFS_RCV_BUFFER 0
+#define OFS_TRANS_HOLD 0
+#define OFS_SEND_BUFFER 0
+#define OFS_INTR_ENABLE (1*REG_OFFSET)
+#define OFS_INTR_ID (2*REG_OFFSET)
+#define OFS_DATA_FORMAT (3*REG_OFFSET)
+#define OFS_LINE_CONTROL (3*REG_OFFSET)
+#define OFS_MODEM_CONTROL (4*REG_OFFSET)
+#define OFS_RS232_OUTPUT (4*REG_OFFSET)
+#define OFS_LINE_STATUS (5*REG_OFFSET)
+#define OFS_MODEM_STATUS (6*REG_OFFSET)
+#define OFS_RS232_INPUT (6*REG_OFFSET)
+#define OFS_SCRATCH_PAD (7*REG_OFFSET)
+
+#define OFS_DIVISOR_LSB (0*REG_OFFSET)
+#define OFS_DIVISOR_MSB (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
+#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+ /* disable interrupts */
+ UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+ /* set up buad rate */
+ {
+ uint32 divisor;
+
+ /* set DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+ /* set divisor */
+ divisor = MAX_BAUD / baud;
+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+ /* clear DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ }
+
+ /* set data format */
+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+
+uint8 getDebugChar(void)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(BAUD_DEFAULT,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(BAUD_DEFAULT,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+ UART16550_WRITE(OFS_SEND_BUFFER, byte);
+ return 1;
+}
diff --git a/arch/mips/ddb5xxx/ddb5476/int-handler.S b/arch/mips/ddb5xxx/ddb5476/int-handler.S
new file mode 100644
index 0000000..12c292e
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5476/int-handler.S
@@ -0,0 +1,112 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for ddb5476
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+#include <asm/ddb5xxx/ddb5476.h>
+
+/*
+ * first level interrupt dispatcher for ocelot board -
+ * We check for the timer first, then check PCI ints A and D.
+ * Then check for serial IRQ and fall through.
+ */
+ .align 5
+ NESTED(ddb5476_handle_int, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ .set noreorder
+ mfc0 t0, CP0_CAUSE
+ mfc0 t2, CP0_STATUS
+
+ and t0, t2
+
+ andi t1, t0, STATUSF_IP7 /* cpu timer */
+ bnez t1, ll_cpu_ip7
+ andi t1, t0, STATUSF_IP2 /* vrc5476 & i8259 */
+ bnez t1, ll_cpu_ip2
+ andi t1, t0, STATUSF_IP3
+ bnez t1, ll_cpu_ip3
+ andi t1, t0, STATUSF_IP4
+ bnez t1, ll_cpu_ip4
+ andi t1, t0, STATUSF_IP5
+ bnez t1, ll_cpu_ip5
+ andi t1, t0, STATUSF_IP6
+ bnez t1, ll_cpu_ip6
+ andi t1, t0, STATUSF_IP0 /* software int 0 */
+ bnez t1, ll_cpu_ip0
+ andi t1, t0, STATUSF_IP1 /* software int 1 */
+ bnez t1, ll_cpu_ip1
+ nop
+
+ .set reorder
+
+ /* wrong alarm or masked ... */
+ // j spurious_interrupt
+ move a0, sp
+ jal vrc5476_irq_dispatch
+ j ret_from_irq
+ nop
+
+ .align 5
+
+ll_cpu_ip0:
+ li a0, CPU_IRQ_BASE + 0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpu_ip1:
+ li a0, CPU_IRQ_BASE + 1
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpu_ip2: /* jump to second-level dispatching */
+ move a0, sp
+ jal vrc5476_irq_dispatch
+ j ret_from_irq
+
+ll_cpu_ip3:
+ li a0, CPU_IRQ_BASE + 3
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpu_ip4:
+ li a0, CPU_IRQ_BASE + 4
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpu_ip5:
+ li a0, CPU_IRQ_BASE + 5
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpu_ip6:
+ li a0, CPU_IRQ_BASE + 6
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpu_ip7:
+ li a0, CPU_IRQ_BASE + 7
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ END(ddb5476_handle_int)
diff --git a/arch/mips/ddb5xxx/ddb5476/irq.c b/arch/mips/ddb5xxx/ddb5476/irq.c
new file mode 100644
index 0000000..5388b58
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5476/irq.c
@@ -0,0 +1,143 @@
+/*
+ * arch/mips/ddb5476/irq.c -- NEC DDB Vrc-5476 interrupt routines
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ *
+ * Re-write the whole thing to use new irq.c file.
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+
+#include <asm/i8259.h>
+#include <asm/io.h>
+#include <asm/ptrace.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
+#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
+#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */
+
+#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */
+#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */
+#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */
+
+#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */
+#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */
+
+#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */
+#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */
+
+#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */
+#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */
+
+static void m1543_irq_setup(void)
+{
+ /*
+ * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all
+ * the possible IO sources in the M1543 are in use by us. We will
+ * use the following mapping:
+ *
+ * IRQ1 - keyboard (default set by M1543)
+ * IRQ3 - reserved for UART B (default set by M1543) (note that
+ * the schematics for the DDB Vrc-5476 board seem to
+ * indicate that IRQ3 is connected to the DS1386
+ * watchdog timer interrupt output so we might have
+ * a conflict)
+ * IRQ4 - reserved for UART A (default set by M1543)
+ * IRQ5 - parallel (default set by M1543)
+ * IRQ8 - DS1386 time of day (RTC) interrupt
+ * IRQ9 - USB (hardwired in ddb_setup)
+ * IRQ10 - PMU (hardwired in ddb_setup)
+ * IRQ12 - mouse
+ * IRQ14,15 - IDE controller (need to be confirmed, jsun)
+ */
+
+ /*
+ * Assing mouse interrupt to IRQ12
+ */
+
+ /* Enter configuration mode */
+ outb(0x51, M1543_PNP_CONFIG);
+ outb(0x23, M1543_PNP_CONFIG);
+
+ /* Select logical device 7 (Keyboard) */
+ outb(0x07, M1543_PNP_INDEX);
+ outb(0x07, M1543_PNP_DATA);
+
+ /* Select IRQ12 */
+ outb(0x72, M1543_PNP_INDEX);
+ outb(0x0c, M1543_PNP_DATA);
+
+ /* Leave configration mode */
+ outb(0xbb, M1543_PNP_CONFIG);
+}
+
+static void nile4_irq_setup(void)
+{
+ int i;
+
+ /* Map all interrupts to CPU int #0 (IP2) */
+ nile4_map_irq_all(0);
+
+ /* PCI INTA#-E# must be level triggered */
+ nile4_set_pci_irq_level_or_edge(0, 1);
+ nile4_set_pci_irq_level_or_edge(1, 1);
+ nile4_set_pci_irq_level_or_edge(2, 1);
+ nile4_set_pci_irq_level_or_edge(3, 1);
+
+ /* PCI INTA#, B#, D# must be active low, INTC# must be active high */
+ nile4_set_pci_irq_polarity(0, 0);
+ nile4_set_pci_irq_polarity(1, 0);
+ nile4_set_pci_irq_polarity(2, 1);
+ nile4_set_pci_irq_polarity(3, 0);
+
+ for (i = 0; i < 16; i++)
+ nile4_clear_irq(i);
+
+ /* Enable CPU int #0 */
+ nile4_enable_irq_output(0);
+
+ /* memory resource acquire in ddb_setup */
+}
+
+static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
+static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL };
+
+extern asmlinkage void ddb5476_handle_int(void);
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+extern void mips_cpu_irq_init(u32 irq_base);
+extern void vrc5476_irq_init(u32 irq_base);
+
+void __init arch_init_irq(void)
+{
+ /* hardware initialization */
+ nile4_irq_setup();
+ m1543_irq_setup();
+
+ /* controller setup */
+ init_i8259_irqs();
+ vrc5476_irq_init(VRC5476_IRQ_BASE);
+ mips_cpu_irq_init(CPU_IRQ_BASE);
+
+ /* setup cascade interrupts */
+ setup_irq(VRC5476_IRQ_BASE + VRC5476_I8259_CASCADE, &irq_cascade);
+ setup_irq(CPU_IRQ_BASE + CPU_VRC5476_CASCADE, &irq_cascade);
+
+ /* setup error interrupts for debugging */
+ setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CPCE, &irq_error);
+ setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CNTD, &irq_error);
+ setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_MCE, &irq_error);
+ setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error);
+ setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error);
+ setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error);
+
+ /* setup the grandpa intr vector */
+ set_except_vector(0, ddb5476_handle_int);
+}
diff --git a/arch/mips/ddb5xxx/ddb5476/nile4_pic.c b/arch/mips/ddb5xxx/ddb5476/nile4_pic.c
new file mode 100644
index 0000000..e930cee
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5476/nile4_pic.c
@@ -0,0 +1,190 @@
+/*
+ * arch/mips/ddb5476/nile4.c --
+ * low-level PIC code for NEC Vrc-5476 (Nile 4)
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+
+/*
+ * Interrupt Programming
+ */
+void nile4_map_irq(int nile4_irq, int cpu_irq)
+{
+ u32 offset, t;
+
+ offset = DDB_INTCTRL;
+ if (nile4_irq >= 8) {
+ offset += 4;
+ nile4_irq -= 8;
+ }
+ t = ddb_in32(offset);
+ t &= ~(7 << (nile4_irq * 4));
+ t |= cpu_irq << (nile4_irq * 4);
+ ddb_out32(offset, t);
+}
+
+void nile4_map_irq_all(int cpu_irq)
+{
+ u32 all, t;
+
+ all = cpu_irq;
+ all |= all << 4;
+ all |= all << 8;
+ all |= all << 16;
+ t = ddb_in32(DDB_INTCTRL);
+ t &= 0x88888888;
+ t |= all;
+ ddb_out32(DDB_INTCTRL, t);
+ t = ddb_in32(DDB_INTCTRL + 4);
+ t &= 0x88888888;
+ t |= all;
+ ddb_out32(DDB_INTCTRL + 4, t);
+}
+
+void nile4_enable_irq(int nile4_irq)
+{
+ u32 offset, t;
+
+ offset = DDB_INTCTRL;
+ if (nile4_irq >= 8) {
+ offset += 4;
+ nile4_irq -= 8;
+ }
+ t = ddb_in32(offset);
+ t |= 8 << (nile4_irq * 4);
+ ddb_out32(offset, t);
+}
+
+void nile4_disable_irq(int nile4_irq)
+{
+ u32 offset, t;
+
+ offset = DDB_INTCTRL;
+ if (nile4_irq >= 8) {
+ offset += 4;
+ nile4_irq -= 8;
+ }
+ t = ddb_in32(offset);
+ t &= ~(8 << (nile4_irq * 4));
+ ddb_out32(offset, t);
+}
+
+void nile4_disable_irq_all(void)
+{
+ ddb_out32(DDB_INTCTRL, 0);
+ ddb_out32(DDB_INTCTRL + 4, 0);
+}
+
+u16 nile4_get_irq_stat(int cpu_irq)
+{
+ return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2);
+}
+
+void nile4_enable_irq_output(int cpu_irq)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTSTAT1 + 4);
+ t |= 1 << (16 + cpu_irq);
+ ddb_out32(DDB_INTSTAT1, t);
+}
+
+void nile4_disable_irq_output(int cpu_irq)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTSTAT1 + 4);
+ t &= ~(1 << (16 + cpu_irq));
+ ddb_out32(DDB_INTSTAT1, t);
+}
+
+void nile4_set_pci_irq_polarity(int pci_irq, int high)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTPPES);
+ if (high)
+ t &= ~(1 << (pci_irq * 2));
+ else
+ t |= 1 << (pci_irq * 2);
+ ddb_out32(DDB_INTPPES, t);
+}
+
+void nile4_set_pci_irq_level_or_edge(int pci_irq, int level)
+{
+ u32 t;
+
+ t = ddb_in32(DDB_INTPPES);
+ if (level)
+ t |= 2 << (pci_irq * 2);
+ else
+ t &= ~(2 << (pci_irq * 2));
+ ddb_out32(DDB_INTPPES, t);
+}
+
+void nile4_clear_irq(int nile4_irq)
+{
+ ddb_out32(DDB_INTCLR, 1 << nile4_irq);
+}
+
+void nile4_clear_irq_mask(u32 mask)
+{
+ ddb_out32(DDB_INTCLR, mask);
+}
+
+u8 nile4_i8259_iack(void)
+{
+ u8 irq;
+ u32 reg;
+
+ /* Set window 0 for interrupt acknowledge */
+ reg = ddb_in32(DDB_PCIINIT0);
+
+ ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
+ irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
+ /* restore window 0 for PCI I/O space */
+ // ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
+ ddb_out32(DDB_PCIINIT0, reg);
+
+ /* i8269.c set the base vector to be 0x0 */
+ return irq + I8259_IRQ_BASE;
+}
+
+#if defined(CONFIG_RUNTIME_DEBUG)
+void nile4_dump_irq_status(void)
+{
+ printk(KERN_DEBUG "
+ CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4),
+ (void *) ddb_in32(DDB_CPUSTAT));
+ printk(KERN_DEBUG "
+ INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4),
+ (void *) ddb_in32(DDB_INTCTRL));
+ printk(KERN_DEBUG
+ "INTSTAT0 = %p:%p\n",
+ (void *) ddb_in32(DDB_INTSTAT0 + 4),
+ (void *) ddb_in32(DDB_INTSTAT0));
+ printk(KERN_DEBUG
+ "INTSTAT1 = %p:%p\n",
+ (void *) ddb_in32(DDB_INTSTAT1 + 4),
+ (void *) ddb_in32(DDB_INTSTAT1));
+ printk(KERN_DEBUG
+ "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4),
+ (void *) ddb_in32(DDB_INTCLR));
+ printk(KERN_DEBUG
+ "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4),
+ (void *) ddb_in32(DDB_INTPPES));
+}
+#endif
diff --git a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c
new file mode 100644
index 0000000..71531f8
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5476/setup.c
@@ -0,0 +1,297 @@
+/*
+ * arch/mips/ddb5476/setup.c -- NEC DDB Vrc-5476 setup routines
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ */
+#include <linux/init.h>
+#include <linux/kbd_ll.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+
+#include <asm/addrspace.h>
+#include <asm/bcache.h>
+#include <asm/irq.h>
+#include <asm/reboot.h>
+#include <asm/gdb-stub.h>
+#include <asm/time.h>
+#include <asm/debug.h>
+#include <asm/traps.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+// #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
+
+#ifdef USE_CPU_COUNTER_TIMER
+
+#define CPU_COUNTER_FREQUENCY 83000000
+#else
+/* otherwise we use general purpose timer */
+#define TIMER_FREQUENCY 83000000
+#define TIMER_BASE DDB_T2CTRL
+#define TIMER_IRQ (VRC5476_IRQ_BASE + VRC5476_IRQ_GPT)
+#endif
+
+static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
+
+static void ddb_machine_restart(char *command)
+{
+ u32 t;
+
+ /* PCI cold reset */
+ t = ddb_in32(DDB_PCICTRL + 4);
+ t |= 0x40000000;
+ ddb_out32(DDB_PCICTRL + 4, t);
+ /* CPU cold reset */
+ t = ddb_in32(DDB_CPUSTAT);
+ t |= 1;
+ ddb_out32(DDB_CPUSTAT, t);
+ /* Call the PROM */
+ back_to_prom();
+}
+
+static void ddb_machine_halt(void)
+{
+ printk(KERN_NOTICE "DDB Vrc-5476 halted.\n");
+ while (1);
+}
+
+static void ddb_machine_power_off(void)
+{
+ printk(KERN_NOTICE "DDB Vrc-5476 halted. Please turn off the power.\n");
+ while (1);
+}
+
+extern void rtc_ds1386_init(unsigned long base);
+
+static void __init ddb_time_init(void)
+{
+#if defined(USE_CPU_COUNTER_TIMER)
+ mips_hpt_frequency = CPU_COUNTER_FREQUENCY;
+#endif
+
+ /* we have ds1396 RTC chip */
+ rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE));
+}
+
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+static void __init ddb_timer_setup(struct irqaction *irq)
+{
+#if defined(USE_CPU_COUNTER_TIMER)
+
+ unsigned int count;
+
+ /* we are using the cpu counter for timer interrupts */
+ setup_irq(CPU_IRQ_BASE + 7, irq);
+
+ /* to generate the first timer interrupt */
+ count = read_c0_count();
+ write_c0_compare(count + 1000);
+
+#else
+
+ ddb_out32(TIMER_BASE, TIMER_FREQUENCY/HZ);
+ ddb_out32(TIMER_BASE+4, 0x1); /* enable timer */
+ setup_irq(TIMER_IRQ, irq);
+#endif
+}
+
+static struct {
+ struct resource dma1;
+ struct resource timer;
+ struct resource rtc;
+ struct resource dma_page_reg;
+ struct resource dma2;
+} ddb5476_ioport = {
+ {
+ "dma1", 0x00, 0x1f, IORESOURCE_BUSY}, {
+ "timer", 0x40, 0x5f, IORESOURCE_BUSY}, {
+ "rtc", 0x70, 0x7f, IORESOURCE_BUSY}, {
+ "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY}, {
+ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY}
+};
+
+static struct {
+ struct resource nile4;
+} ddb5476_iomem = {
+ { "Nile 4", DDB_BASE, DDB_BASE + DDB_SIZE - 1, IORESOURCE_BUSY}
+};
+
+
+static void ddb5476_board_init(void);
+
+static void __init ddb5476_setup(void)
+{
+ set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
+
+ board_time_init = ddb_time_init;
+ board_timer_setup = ddb_timer_setup;
+
+ _machine_restart = ddb_machine_restart;
+ _machine_halt = ddb_machine_halt;
+ _machine_power_off = ddb_machine_power_off;
+
+ /* request io port/mem resources */
+ if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) ||
+ request_resource(&ioport_resource, &ddb5476_ioport.timer) ||
+ request_resource(&ioport_resource, &ddb5476_ioport.rtc) ||
+ request_resource(&ioport_resource,
+ &ddb5476_ioport.dma_page_reg)
+ || request_resource(&ioport_resource, &ddb5476_ioport.dma2)
+ || request_resource(&iomem_resource, &ddb5476_iomem.nile4)) {
+ printk
+ ("ddb_setup - requesting oo port resources failed.\n");
+ for (;;);
+ }
+
+ /* Reboot on panic */
+ panic_timeout = 180;
+
+ /* [jsun] we need to set BAR0 so that SDRAM 0 appears at 0x0 in PCI */
+ /* *(long*)0xbfa00218 = 0x8; */
+
+ /* board initialization stuff */
+ ddb5476_board_init();
+}
+
+early_initcall(ddb5476_setup);
+
+/*
+ * We don't trust bios. We essentially does hardware re-initialization
+ * as complete as possible, as far as we know we can safely do.
+ */
+static void ddb5476_board_init(void)
+{
+ /* ----------- setup PDARs ------------ */
+ /* check SDRAM0, whether we are on MEM bus does not matter */
+ db_assert((ddb_in32(DDB_SDRAM0) & 0xffffffef) ==
+ ddb_calc_pdar(DDB_SDRAM_BASE, DDB_SDRAM_SIZE, 32, 0, 1));
+
+ /* SDRAM1 should be turned off. What is this for anyway ? */
+ db_assert( (ddb_in32(DDB_SDRAM1) & 0xf) == 0);
+
+ /* flash 1&2, DDB status, DDB control */
+ ddb_set_pdar(DDB_DCS2, DDB_DCS2_BASE, DDB_DCS2_SIZE, 16, 0, 0);
+ ddb_set_pdar(DDB_DCS3, DDB_DCS3_BASE, DDB_DCS3_SIZE, 16, 0, 0);
+ ddb_set_pdar(DDB_DCS4, DDB_DCS4_BASE, DDB_DCS4_SIZE, 8, 0, 0);
+ ddb_set_pdar(DDB_DCS5, DDB_DCS5_BASE, DDB_DCS5_SIZE, 8, 0, 0);
+
+ /* shut off other pdar so they don't accidentally get into the way */
+ ddb_set_pdar(DDB_DCS6, 0xffffffff, 0, 32, 0, 0);
+ ddb_set_pdar(DDB_DCS7, 0xffffffff, 0, 32, 0, 0);
+ ddb_set_pdar(DDB_DCS8, 0xffffffff, 0, 32, 0, 0);
+
+ /* verify VRC5477 base addr */
+ /* don't care about some details */
+ db_assert((ddb_in32(DDB_INTCS) & 0xffffff0f) ==
+ ddb_calc_pdar(DDB_INTCS_BASE, DDB_INTCS_SIZE, 8, 0, 0));
+
+ /* verify BOOT ROM addr */
+ /* don't care about some details */
+ db_assert((ddb_in32(DDB_BOOTCS) & 0xffffff0f) ==
+ ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0));
+
+ /* setup PCI windows - window1 for MEM/config, window0 for IO */
+ ddb_set_pdar(DDB_PCIW0, DDB_PCI_IO_BASE, DDB_PCI_IO_SIZE, 32, 0, 1);
+ ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
+
+ ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1);
+ ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32);
+
+ /* ----------- setup PDARs ------------ */
+ /* this is problematic - it will reset Aladin which cause we loose
+ * serial port, and we don't know how to set up Aladin chip again.
+ */
+ // ddb_pci_reset_bus();
+
+ ddb_out32(DDB_BAR0, 0x00000008);
+
+ ddb_out32(DDB_BARC, 0xffffffff);
+ ddb_out32(DDB_BARB, 0xffffffff);
+ ddb_out32(DDB_BAR1, 0xffffffff);
+ ddb_out32(DDB_BAR2, 0xffffffff);
+ ddb_out32(DDB_BAR3, 0xffffffff);
+ ddb_out32(DDB_BAR4, 0xffffffff);
+ ddb_out32(DDB_BAR5, 0xffffffff);
+ ddb_out32(DDB_BAR6, 0xffffffff);
+ ddb_out32(DDB_BAR7, 0xffffffff);
+ ddb_out32(DDB_BAR8, 0xffffffff);
+
+ /* ----------- switch PCI1 to PCI CONFIG space ------------ */
+ ddb_set_pdar(DDB_PCIW1, DDB_PCI_CONFIG_BASE, DDB_PCI_CONFIG_SIZE, 32, 0, 1);
+ ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_CFG, 0x0, DDB_PCI_ACCESS_32);
+
+ /* ----- M1543 PCI setup ------ */
+
+ /* we know M1543 PCI-ISA controller is at addr:18 */
+ /* xxxx1010 makes USB at addr:13 and PMU at addr:14 */
+ *(volatile unsigned char *) 0xa8040072 &= 0xf0;
+ *(volatile unsigned char *) 0xa8040072 |= 0xa;
+
+ /* setup USB interrupt to IRQ 9, (bit 0:3 - 0001)
+ * no IOCHRDY signal, (bit 7 - 1)
+ * M1543C & M7101 VID and Subsys Device ID are read-only (bit 6 - 1)
+ * Make USB Master INTAJ level to edge conversion (bit 4 - 1)
+ */
+ *(unsigned char *) 0xa8040074 = 0xd1;
+
+ /* setup PMU(SCI to IRQ 10 (bit 0:3 - 0011)
+ * SCI routing to IRQ 13 disabled (bit 7 - 1)
+ * SCI interrupt level to edge conversion bypassed (bit 4 - 0)
+ */
+ *(unsigned char *) 0xa8040076 = 0x83;
+
+ /* setup IDE controller
+ * enable IDE controller (bit 6 - 1)
+ * IDE IDSEL to be addr:24 (bit 4:5 - 11)
+ * no IDE ATA Secondary Bus Signal Pad Control (bit 3 - 0)
+ * no IDE ATA Primary Bus Signal Pad Control (bit 2 - 0)
+ * primary IRQ is 14, secondary is 15 (bit 1:0 - 01
+ */
+ // *(unsigned char*)0xa8040058 = 0x71;
+ // *(unsigned char*)0xa8040058 = 0x79;
+ // *(unsigned char*)0xa8040058 = 0x74; // use SIRQ, primary tri-state
+ *(unsigned char *) 0xa8040058 = 0x75; // primary tri-state
+
+#if 0
+ /* this is not necessary if M5229 does not use SIRQ */
+ *(unsigned char *) 0xa8040044 = 0x0d; // primary to IRQ 14
+ *(unsigned char *) 0xa8040075 = 0x0d; // secondary to IRQ 14
+#endif
+
+ /* enable IDE in the M5229 config register 0x50 (bit 0 - 1) */
+ /* M5229 IDSEL is addr:24; see above setting */
+ *(unsigned char *) 0xa9000050 |= 0x1;
+
+ /* enable bus master (bit 2) and IO decoding (bit 0) */
+ *(unsigned char *) 0xa9000004 |= 0x5;
+
+ /* enable native, copied from arch/ppc/k2boot/head.S */
+ /* TODO - need volatile, need to be portable */
+ *(unsigned char *) 0xa9000009 = 0xff;
+
+ /* ----- end of M1543 PCI setup ------ */
+
+ /* ----- reset on-board ether chip ------ */
+ *((volatile u32 *) 0xa8020004) |= 1; /* decode I/O */
+ *((volatile u32 *) 0xa8020010) = 0; /* set BAR address */
+
+ /* send reset command */
+ *((volatile u32 *) 0xa6000000) = 1; /* do a soft reset */
+
+ /* disable ether chip */
+ *((volatile u32 *) 0xa8020004) = 0; /* disable any decoding */
+
+ /* put it into sleep */
+ *((volatile u32 *) 0xa8020040) = 0x80000000;
+
+ /* ----- end of reset on-board ether chip ------ */
+
+ /* ----------- switch PCI1 back to PCI MEM space ------------ */
+ ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1);
+ ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32);
+}
diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
new file mode 100644
index 0000000..a77682b
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
@@ -0,0 +1,112 @@
+/*
+ * The irq controller for vrc5476.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+#include <asm/system.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+static int irq_base;
+
+static void vrc5476_irq_enable(uint irq)
+{
+ nile4_enable_irq(irq - irq_base);
+}
+
+static void vrc5476_irq_disable(uint irq)
+{
+ nile4_disable_irq(irq - irq_base);
+}
+
+static unsigned int vrc5476_irq_startup(uint irq)
+{
+ nile4_enable_irq(irq - irq_base);
+ return 0;
+}
+
+#define vrc5476_irq_shutdown vrc5476_irq_disable
+
+static void vrc5476_irq_ack(uint irq)
+{
+ nile4_clear_irq(irq - irq_base);
+ nile4_disable_irq(irq - irq_base);
+}
+
+static void vrc5476_irq_end(uint irq)
+{
+ if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ vrc5476_irq_enable(irq);
+}
+
+static hw_irq_controller vrc5476_irq_controller = {
+ "vrc5476",
+ vrc5476_irq_startup,
+ vrc5476_irq_shutdown,
+ vrc5476_irq_enable,
+ vrc5476_irq_disable,
+ vrc5476_irq_ack,
+ vrc5476_irq_end,
+ NULL /* no affinity stuff for UP */
+};
+
+void __init
+vrc5476_irq_init(u32 base)
+{
+ u32 i;
+
+ irq_base = base;
+ for (i= base; i< base + NUM_VRC5476_IRQ; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &vrc5476_irq_controller;
+ }
+}
+
+
+asmlinkage void
+vrc5476_irq_dispatch(struct pt_regs *regs)
+{
+ extern void spurious_interrupt(void);
+
+ u32 mask;
+ int nile4_irq;
+
+ mask = nile4_get_irq_stat(0);
+
+ /* quick check for possible time interrupt */
+ if (mask & (1 << VRC5476_IRQ_GPT)) {
+ do_IRQ(VRC5476_IRQ_BASE + VRC5476_IRQ_GPT, regs);
+ return;
+ }
+
+ /* check for i8259 interrupts */
+ if (mask & (1 << VRC5476_I8259_CASCADE)) {
+ int i8259_irq = nile4_i8259_iack();
+ do_IRQ(I8259_IRQ_BASE + i8259_irq, regs);
+ return;
+ }
+
+ /* regular nile4 interrupts (we should not really have any */
+ for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1) {
+ if (mask & 1) {
+ do_IRQ(VRC5476_IRQ_BASE + nile4_irq, regs);
+ return;
+ }
+ }
+ spurious_interrupt();
+}
diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile
new file mode 100644
index 0000000..b79b43c
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for NEC DDB-Vrc5477 board
+#
+
+obj-y += int-handler.o irq.o irq_5477.o setup.o lcd44780.o
+
+obj-$(CONFIG_RUNTIME_DEBUG) += debug.o
+obj-$(CONFIG_KGDB) += kgdb_io.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ddb5xxx/ddb5477/debug.c b/arch/mips/ddb5xxx/ddb5477/debug.c
new file mode 100644
index 0000000..68919d5
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/debug.c
@@ -0,0 +1,160 @@
+/***********************************************************************
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/ddb5xxx/ddb5477/debug.c
+ * vrc5477 specific debug routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ ***********************************************************************
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/mipsregs.h>
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+typedef struct {
+ const char *regname;
+ unsigned regaddr;
+} Register;
+
+void jsun_show_regs(char *name, Register *regs)
+{
+ int i;
+
+ printk("\nshow regs: %s\n", name);
+ for(i=0;regs[i].regname!= NULL; i++) {
+ printk("%-16s= %08x\t\t(@%08x)\n",
+ regs[i].regname,
+ *(unsigned *)(regs[i].regaddr),
+ regs[i].regaddr);
+ }
+}
+
+static Register int_regs[] = {
+ {"DDB_INTCTRL0", DDB_BASE + DDB_INTCTRL0},
+ {"DDB_INTCTRL1", DDB_BASE + DDB_INTCTRL1},
+ {"DDB_INTCTRL2", DDB_BASE + DDB_INTCTRL2},
+ {"DDB_INTCTRL3", DDB_BASE + DDB_INTCTRL3},
+ {"DDB_INT0STAT", DDB_BASE + DDB_INT0STAT},
+ {"DDB_INT1STAT", DDB_BASE + DDB_INT1STAT},
+ {"DDB_INT2STAT", DDB_BASE + DDB_INT2STAT},
+ {"DDB_INT3STAT", DDB_BASE + DDB_INT3STAT},
+ {"DDB_INT4STAT", DDB_BASE + DDB_INT4STAT},
+ {"DDB_NMISTAT", DDB_BASE + DDB_NMISTAT},
+ {"DDB_INTPPES0", DDB_BASE + DDB_INTPPES0},
+ {"DDB_INTPPES1", DDB_BASE + DDB_INTPPES1},
+ {NULL, 0x0}
+};
+
+void vrc5477_show_int_regs()
+{
+ jsun_show_regs("interrupt registers", int_regs);
+ printk("CPU CAUSE = %08x\n", read_c0_cause());
+ printk("CPU STATUS = %08x\n", read_c0_status());
+}
+static Register pdar_regs[] = {
+ {"DDB_SDRAM0", DDB_BASE + DDB_SDRAM0},
+ {"DDB_SDRAM1", DDB_BASE + DDB_SDRAM1},
+ {"DDB_LCS0", DDB_BASE + DDB_LCS0},
+ {"DDB_LCS1", DDB_BASE + DDB_LCS1},
+ {"DDB_LCS2", DDB_BASE + DDB_LCS2},
+ {"DDB_INTCS", DDB_BASE + DDB_INTCS},
+ {"DDB_BOOTCS", DDB_BASE + DDB_BOOTCS},
+ {"DDB_PCIW0", DDB_BASE + DDB_PCIW0},
+ {"DDB_PCIW1", DDB_BASE + DDB_PCIW1},
+ {"DDB_IOPCIW0", DDB_BASE + DDB_IOPCIW0},
+ {"DDB_IOPCIW1", DDB_BASE + DDB_IOPCIW1},
+ {NULL, 0x0}
+};
+void vrc5477_show_pdar_regs(void)
+{
+ jsun_show_regs("PDAR regs", pdar_regs);
+}
+
+static Register bar_regs[] = {
+ {"DDB_BARC0", DDB_BASE + DDB_BARC0},
+ {"DDB_BARM010", DDB_BASE + DDB_BARM010},
+ {"DDB_BARM230", DDB_BASE + DDB_BARM230},
+ {"DDB_BAR00", DDB_BASE + DDB_BAR00},
+ {"DDB_BAR10", DDB_BASE + DDB_BAR10},
+ {"DDB_BAR20", DDB_BASE + DDB_BAR20},
+ {"DDB_BAR30", DDB_BASE + DDB_BAR30},
+ {"DDB_BAR40", DDB_BASE + DDB_BAR40},
+ {"DDB_BAR50", DDB_BASE + DDB_BAR50},
+ {"DDB_BARB0", DDB_BASE + DDB_BARB0},
+ {"DDB_BARC1", DDB_BASE + DDB_BARC1},
+ {"DDB_BARM011", DDB_BASE + DDB_BARM011},
+ {"DDB_BARM231", DDB_BASE + DDB_BARM231},
+ {"DDB_BAR01", DDB_BASE + DDB_BAR01},
+ {"DDB_BAR11", DDB_BASE + DDB_BAR11},
+ {"DDB_BAR21", DDB_BASE + DDB_BAR21},
+ {"DDB_BAR31", DDB_BASE + DDB_BAR31},
+ {"DDB_BAR41", DDB_BASE + DDB_BAR41},
+ {"DDB_BAR51", DDB_BASE + DDB_BAR51},
+ {"DDB_BARB1", DDB_BASE + DDB_BARB1},
+ {NULL, 0x0}
+};
+void vrc5477_show_bar_regs(void)
+{
+ jsun_show_regs("BAR regs", bar_regs);
+}
+
+static Register pci_regs[] = {
+ {"DDB_PCIW0", DDB_BASE + DDB_PCIW0},
+ {"DDB_PCIW1", DDB_BASE + DDB_PCIW1},
+ {"DDB_PCIINIT00", DDB_BASE + DDB_PCIINIT00},
+ {"DDB_PCIINIT10", DDB_BASE + DDB_PCIINIT10},
+ {"DDB_PCICTL0_L", DDB_BASE + DDB_PCICTL0_L},
+ {"DDB_PCICTL0_H", DDB_BASE + DDB_PCICTL0_H},
+ {"DDB_PCIARB0_L", DDB_BASE + DDB_PCIARB0_L},
+ {"DDB_PCIARB0_H", DDB_BASE + DDB_PCIARB0_H},
+ {"DDB_PCISWP0", DDB_BASE + DDB_PCISWP0},
+ {"DDB_PCIERR0", DDB_BASE + DDB_PCIERR0},
+ {"DDB_IOPCIW0", DDB_BASE + DDB_IOPCIW0},
+ {"DDB_IOPCIW1", DDB_BASE + DDB_IOPCIW1},
+ {"DDB_PCIINIT01", DDB_BASE + DDB_PCIINIT01},
+ {"DDB_PCIINIT11", DDB_BASE + DDB_PCIINIT11},
+ {"DDB_PCICTL1_L", DDB_BASE + DDB_PCICTL1_L},
+ {"DDB_PCICTL1_H", DDB_BASE + DDB_PCICTL1_H},
+ {"DDB_PCIARB1_L", DDB_BASE + DDB_PCIARB1_L},
+ {"DDB_PCIARB1_H", DDB_BASE + DDB_PCIARB1_H},
+ {"DDB_PCISWP1", DDB_BASE + DDB_PCISWP1},
+ {"DDB_PCIERR1", DDB_BASE + DDB_PCIERR1},
+ {NULL, 0x0}
+};
+void vrc5477_show_pci_regs(void)
+{
+ jsun_show_regs("PCI regs", pci_regs);
+}
+
+static Register lb_regs[] = {
+ {"DDB_LCNFG", DDB_BASE + DDB_LCNFG},
+ {"DDB_LCST0", DDB_BASE + DDB_LCST0},
+ {"DDB_LCST1", DDB_BASE + DDB_LCST1},
+ {"DDB_LCST2", DDB_BASE + DDB_LCST2},
+ {"DDB_ERRADR", DDB_BASE + DDB_ERRADR},
+ {"DDB_ERRCS", DDB_BASE + DDB_ERRCS},
+ {"DDB_BTM", DDB_BASE + DDB_BTM},
+ {"DDB_BCST", DDB_BASE + DDB_BCST},
+ {NULL, 0x0}
+};
+void vrc5477_show_lb_regs(void)
+{
+ jsun_show_regs("Local Bus regs", lb_regs);
+}
+
+void vrc5477_show_all_regs(void)
+{
+ vrc5477_show_pdar_regs();
+ vrc5477_show_pci_regs();
+ vrc5477_show_bar_regs();
+ vrc5477_show_int_regs();
+ vrc5477_show_lb_regs();
+}
diff --git a/arch/mips/ddb5xxx/ddb5477/int-handler.S b/arch/mips/ddb5xxx/ddb5477/int-handler.S
new file mode 100644
index 0000000..a2502a1
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/int-handler.S
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for ddb5477
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/ddb5xxx/ddb5477.h>
+
+/*
+ * first level interrupt dispatcher for ocelot board -
+ * We check for the timer first, then check PCI ints A and D.
+ * Then check for serial IRQ and fall through.
+ */
+ .align 5
+ NESTED(ddb5477_handle_int, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ .set noreorder
+ mfc0 t0, CP0_CAUSE
+ mfc0 t2, CP0_STATUS
+
+ and t0, t2
+
+ andi t1, t0, STATUSF_IP7 /* cpu timer */
+ bnez t1, ll_cputimer_irq
+ andi t1, t0, (STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 )
+ bnez t1, ll_vrc5477_irq
+ andi t1, t0, STATUSF_IP0 /* software int 0 */
+ bnez t1, ll_cpu_ip0
+ andi t1, t0, STATUSF_IP1 /* software int 1 */
+ bnez t1, ll_cpu_ip1
+ nop
+ .set reorder
+
+ /* wrong alarm or masked ... */
+ j spurious_interrupt
+ nop
+ END(ddb5477_handle_int)
+
+ .align 5
+
+ll_vrc5477_irq:
+ move a0, sp
+ jal vrc5477_irq_dispatch
+ j ret_from_irq
+
+ll_cputimer_irq:
+ li a0, CPU_IRQ_BASE + 7
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+
+ll_cpu_ip0:
+ li a0, CPU_IRQ_BASE + 0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpu_ip1:
+ li a0, CPU_IRQ_BASE + 1
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c
new file mode 100644
index 0000000..5f027bf
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/irq.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/ddb5xxx/ddb5477/irq.c
+ * The irq setup and misc routines for DDB5476.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+#include <asm/i8259.h>
+#include <asm/system.h>
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+
+/*
+ * IRQ mapping
+ *
+ * 0-7: 8 CPU interrupts
+ * 0 - software interrupt 0
+ * 1 - software interrupt 1
+ * 2 - most Vrc5477 interrupts are routed to this pin
+ * 3 - (optional) some other interrupts routed to this pin for debugg
+ * 4 - not used
+ * 5 - not used
+ * 6 - not used
+ * 7 - cpu timer (used by default)
+ *
+ * 8-39: 32 Vrc5477 interrupt sources
+ * (refer to the Vrc5477 manual)
+ */
+
+#define PCI0 DDB_INTPPES0
+#define PCI1 DDB_INTPPES1
+
+#define ACTIVE_LOW 1
+#define ACTIVE_HIGH 0
+
+#define LEVEL_SENSE 2
+#define EDGE_TRIGGER 0
+
+#define INTA 0
+#define INTB 1
+#define INTC 2
+#define INTD 3
+#define INTE 4
+
+static inline void
+set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger)
+{
+ u32 reg_value;
+ u32 reg_bitmask;
+
+ reg_value = ddb_in32(pci);
+ reg_bitmask = 0x3 << (intn * 2);
+
+ reg_value &= ~reg_bitmask;
+ reg_value |= (active | trigger) << (intn * 2);
+ ddb_out32(pci, reg_value);
+}
+
+extern void vrc5477_irq_init(u32 base);
+extern void mips_cpu_irq_init(u32 base);
+extern asmlinkage void ddb5477_handle_int(void);
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
+
+void __init arch_init_irq(void)
+{
+ /* by default, we disable all interrupts and route all vrc5477
+ * interrupts to pin 0 (irq 2) */
+ ddb_out32(DDB_INTCTRL0, 0);
+ ddb_out32(DDB_INTCTRL1, 0);
+ ddb_out32(DDB_INTCTRL2, 0);
+ ddb_out32(DDB_INTCTRL3, 0);
+
+ clear_c0_status(0xff00);
+ set_c0_status(0x0400);
+
+ /* setup PCI interrupt attributes */
+ set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE);
+ if (mips_machtype == MACH_NEC_ROCKHOPPERII)
+ set_pci_int_attr(PCI0, INTC, ACTIVE_HIGH, LEVEL_SENSE);
+ else
+ set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI0, INTD, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI0, INTE, ACTIVE_LOW, LEVEL_SENSE);
+
+ set_pci_int_attr(PCI1, INTA, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTB, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTC, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTD, ACTIVE_LOW, LEVEL_SENSE);
+ set_pci_int_attr(PCI1, INTE, ACTIVE_LOW, LEVEL_SENSE);
+
+ /*
+ * for debugging purpose, we enable several error interrupts
+ * and route them to pin 1. (IP3)
+ */
+ /* cpu parity check - 0 */
+ ll_vrc5477_irq_route(0, 1); ll_vrc5477_irq_enable(0);
+ /* cpu no-target decode - 1 */
+ ll_vrc5477_irq_route(1, 1); ll_vrc5477_irq_enable(1);
+ /* local bus read time-out - 7 */
+ ll_vrc5477_irq_route(7, 1); ll_vrc5477_irq_enable(7);
+ /* PCI SERR# - 14 */
+ ll_vrc5477_irq_route(14, 1); ll_vrc5477_irq_enable(14);
+ /* PCI internal error - 15 */
+ ll_vrc5477_irq_route(15, 1); ll_vrc5477_irq_enable(15);
+ /* IOPCI SERR# - 30 */
+ ll_vrc5477_irq_route(30, 1); ll_vrc5477_irq_enable(30);
+ /* IOPCI internal error - 31 */
+ ll_vrc5477_irq_route(31, 1); ll_vrc5477_irq_enable(31);
+
+ /* init all controllers */
+ init_i8259_irqs();
+ mips_cpu_irq_init(CPU_IRQ_BASE);
+ vrc5477_irq_init(VRC5477_IRQ_BASE);
+
+
+ /* setup cascade interrupts */
+ setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
+ setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
+
+ /* hook up the first-level interrupt handler */
+ set_except_vector(0, ddb5477_handle_int);
+}
+
+u8 i8259_interrupt_ack(void)
+{
+ u8 irq;
+ u32 reg;
+
+ /* Set window 0 for interrupt acknowledge */
+ reg = ddb_in32(DDB_PCIINIT10);
+
+ ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
+ irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
+ ddb_out32(DDB_PCIINIT10, reg);
+
+ /* i8259.c set the base vector to be 0x0 */
+ return irq + I8259_IRQ_BASE;
+}
+/*
+ * the first level int-handler will jump here if it is a vrc5477 irq
+ */
+#define NUM_5477_IRQS 32
+asmlinkage void
+vrc5477_irq_dispatch(struct pt_regs *regs)
+{
+ u32 intStatus;
+ u32 bitmask;
+ u32 i;
+
+ db_assert(ddb_in32(DDB_INT2STAT) == 0);
+ db_assert(ddb_in32(DDB_INT3STAT) == 0);
+ db_assert(ddb_in32(DDB_INT4STAT) == 0);
+ db_assert(ddb_in32(DDB_NMISTAT) == 0);
+
+ if (ddb_in32(DDB_INT1STAT) != 0) {
+#if defined(CONFIG_RUNTIME_DEBUG)
+ vrc5477_show_int_regs();
+#endif
+ panic("error interrupt has happened.");
+ }
+
+ intStatus = ddb_in32(DDB_INT0STAT);
+
+ if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
+ /* check for i8259 interrupts */
+ if (intStatus & (1 << VRC5477_I8259_CASCADE)) {
+ int i8259_irq = i8259_interrupt_ack();
+ do_IRQ(I8259_IRQ_BASE + i8259_irq, regs);
+ return;
+ }
+ }
+
+ for (i=0, bitmask=1; i<= NUM_5477_IRQS; bitmask <<=1, i++) {
+ /* do we need to "and" with the int mask? */
+ if (intStatus & bitmask) {
+ do_IRQ(VRC5477_IRQ_BASE + i, regs);
+ return;
+ }
+ }
+}
diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
new file mode 100644
index 0000000..0d5e706
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/ddb5xxx/ddb5477/irq_5477.c
+ * This file defines the irq handler for Vrc5477.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+/*
+ * Vrc5477 defines 32 IRQs.
+ *
+ * This file exports one function:
+ * vrc5477_irq_init(u32 irq_base);
+ */
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+#include <asm/debug.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+/* number of total irqs supported by Vrc5477 */
+#define NUM_5477_IRQ 32
+
+static int vrc5477_irq_base = -1;
+
+
+static void
+vrc5477_irq_enable(unsigned int irq)
+{
+ db_assert(vrc5477_irq_base != -1);
+ db_assert(irq >= vrc5477_irq_base);
+ db_assert(irq < vrc5477_irq_base+ NUM_5477_IRQ);
+
+ ll_vrc5477_irq_enable(irq - vrc5477_irq_base);
+}
+
+static void
+vrc5477_irq_disable(unsigned int irq)
+{
+ db_assert(vrc5477_irq_base != -1);
+ db_assert(irq >= vrc5477_irq_base);
+ db_assert(irq < vrc5477_irq_base + NUM_5477_IRQ);
+
+ ll_vrc5477_irq_disable(irq - vrc5477_irq_base);
+}
+
+static unsigned int vrc5477_irq_startup(unsigned int irq)
+{
+ vrc5477_irq_enable(irq);
+ return 0;
+}
+
+#define vrc5477_irq_shutdown vrc5477_irq_disable
+
+static void
+vrc5477_irq_ack(unsigned int irq)
+{
+ db_assert(vrc5477_irq_base != -1);
+ db_assert(irq >= vrc5477_irq_base);
+ db_assert(irq < vrc5477_irq_base+ NUM_5477_IRQ);
+
+ /* clear the interrupt bit */
+ /* some irqs require the driver to clear the sources */
+ ddb_out32(DDB_INTCLR32, 1 << (irq - vrc5477_irq_base));
+
+ /* disable interrupt - some handler will re-enable the irq
+ * and if the interrupt is leveled, we will have infinite loop
+ */
+ ll_vrc5477_irq_disable(irq - vrc5477_irq_base);
+}
+
+static void
+vrc5477_irq_end(unsigned int irq)
+{
+ db_assert(vrc5477_irq_base != -1);
+ db_assert(irq >= vrc5477_irq_base);
+ db_assert(irq < vrc5477_irq_base + NUM_5477_IRQ);
+
+ if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ ll_vrc5477_irq_enable( irq - vrc5477_irq_base);
+}
+
+hw_irq_controller vrc5477_irq_controller = {
+ "vrc5477_irq",
+ vrc5477_irq_startup,
+ vrc5477_irq_shutdown,
+ vrc5477_irq_enable,
+ vrc5477_irq_disable,
+ vrc5477_irq_ack,
+ vrc5477_irq_end,
+ NULL /* no affinity stuff for UP */
+};
+
+void __init vrc5477_irq_init(u32 irq_base)
+{
+ u32 i;
+
+ for (i= irq_base; i< irq_base+ NUM_5477_IRQ; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+ irq_desc[i].handler = &vrc5477_irq_controller;
+ }
+
+ vrc5477_irq_base = irq_base;
+}
+
+void ll_vrc5477_irq_route(int vrc5477_irq, int ip)
+{
+ u32 reg_value;
+ u32 reg_bitmask;
+ u32 reg_index;
+
+ db_assert(vrc5477_irq >= 0);
+ db_assert(vrc5477_irq < NUM_5477_IRQ);
+ db_assert(ip >= 0);
+ db_assert((ip < 5) || (ip == 6));
+
+ reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
+ reg_value = ddb_in32(reg_index);
+ reg_bitmask = 7 << (vrc5477_irq % 8 * 4);
+ reg_value &= ~reg_bitmask;
+ reg_value |= ip << (vrc5477_irq % 8 * 4);
+ ddb_out32(reg_index, reg_value);
+}
+
+void ll_vrc5477_irq_enable(int vrc5477_irq)
+{
+ u32 reg_value;
+ u32 reg_bitmask;
+ u32 reg_index;
+
+ db_assert(vrc5477_irq >= 0);
+ db_assert(vrc5477_irq < NUM_5477_IRQ);
+
+ reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
+ reg_value = ddb_in32(reg_index);
+ reg_bitmask = 8 << (vrc5477_irq % 8 * 4);
+ db_assert((reg_value & reg_bitmask) == 0);
+ ddb_out32(reg_index, reg_value | reg_bitmask);
+}
+
+void ll_vrc5477_irq_disable(int vrc5477_irq)
+{
+ u32 reg_value;
+ u32 reg_bitmask;
+ u32 reg_index;
+
+ db_assert(vrc5477_irq >= 0);
+ db_assert(vrc5477_irq < NUM_5477_IRQ);
+
+ reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
+ reg_value = ddb_in32(reg_index);
+ reg_bitmask = 8 << (vrc5477_irq % 8 * 4);
+
+ /* we assert that the interrupt is enabled (perhaps over-zealous) */
+ db_assert( (reg_value & reg_bitmask) != 0);
+ ddb_out32(reg_index, reg_value & ~reg_bitmask);
+}
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
new file mode 100644
index 0000000..1d18d59
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@@ -0,0 +1,136 @@
+/*
+ * kgdb io functions for DDB5477. We use the second serial port (upper one).
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+/* ======================= CONFIG ======================== */
+
+/* [jsun] we use the second serial port for kdb */
+#define BASE 0xbfa04240
+#define MAX_BAUD 115200
+
+/* distance in bytes between two serial registers */
+#define REG_OFFSET 8
+
+/*
+ * 0 - kgdb does serial init
+ * 1 - kgdb skip serial init
+ */
+static int remoteDebugInitialized = 0;
+
+/*
+ * the default baud rate *if* kgdb does serial init
+ */
+#define BAUD_DEFAULT UART16550_BAUD_38400
+
+/* ======================= END OF CONFIG ======================== */
+
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+#define UART16550_BAUD_2400 2400
+#define UART16550_BAUD_4800 4800
+#define UART16550_BAUD_9600 9600
+#define UART16550_BAUD_19200 19200
+#define UART16550_BAUD_38400 38400
+#define UART16550_BAUD_57600 57600
+#define UART16550_BAUD_115200 115200
+
+#define UART16550_PARITY_NONE 0
+#define UART16550_PARITY_ODD 0x08
+#define UART16550_PARITY_EVEN 0x18
+#define UART16550_PARITY_MARK 0x28
+#define UART16550_PARITY_SPACE 0x38
+
+#define UART16550_DATA_5BIT 0x0
+#define UART16550_DATA_6BIT 0x1
+#define UART16550_DATA_7BIT 0x2
+#define UART16550_DATA_8BIT 0x3
+
+#define UART16550_STOP_1BIT 0x0
+#define UART16550_STOP_2BIT 0x4
+
+/* register offset */
+#define OFS_RCV_BUFFER 0
+#define OFS_TRANS_HOLD 0
+#define OFS_SEND_BUFFER 0
+#define OFS_INTR_ENABLE (1*REG_OFFSET)
+#define OFS_INTR_ID (2*REG_OFFSET)
+#define OFS_DATA_FORMAT (3*REG_OFFSET)
+#define OFS_LINE_CONTROL (3*REG_OFFSET)
+#define OFS_MODEM_CONTROL (4*REG_OFFSET)
+#define OFS_RS232_OUTPUT (4*REG_OFFSET)
+#define OFS_LINE_STATUS (5*REG_OFFSET)
+#define OFS_MODEM_STATUS (6*REG_OFFSET)
+#define OFS_RS232_INPUT (6*REG_OFFSET)
+#define OFS_SCRATCH_PAD (7*REG_OFFSET)
+
+#define OFS_DIVISOR_LSB (0*REG_OFFSET)
+#define OFS_DIVISOR_MSB (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
+#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+ /* disable interrupts */
+ UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+ /* set up buad rate */
+ {
+ uint32 divisor;
+
+ /* set DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+ /* set divisor */
+ divisor = MAX_BAUD / baud;
+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+ /* clear DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ }
+
+ /* set data format */
+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+
+uint8 getDebugChar(void)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(BAUD_DEFAULT,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(BAUD_DEFAULT,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+ UART16550_WRITE(OFS_SEND_BUFFER, byte);
+ return 1;
+}
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
new file mode 100644
index 0000000..35c6c22
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
@@ -0,0 +1,92 @@
+/*
+ * lcd44780.c
+ * Simple "driver" for a memory-mapped 44780-style LCD display.
+ *
+ * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#define LCD44780_COMMAND ((volatile unsigned char *)0xbe020000)
+#define LCD44780_DATA ((volatile unsigned char *)0xbe020001)
+
+#define LCD44780_4BIT_1LINE 0x20
+#define LCD44780_4BIT_2LINE 0x28
+#define LCD44780_8BIT_1LINE 0x30
+#define LCD44780_8BIT_2LINE 0x38
+#define LCD44780_MODE_DEC 0x04
+#define LCD44780_MODE_DEC_SHIFT 0x05
+#define LCD44780_MODE_INC 0x06
+#define LCD44780_MODE_INC_SHIFT 0x07
+#define LCD44780_SCROLL_LEFT 0x18
+#define LCD44780_SCROLL_RIGHT 0x1e
+#define LCD44780_CURSOR_UNDERLINE 0x0e
+#define LCD44780_CURSOR_BLOCK 0x0f
+#define LCD44780_CURSOR_OFF 0x0c
+#define LCD44780_CLEAR 0x01
+#define LCD44780_BLANK 0x08
+#define LCD44780_RESTORE 0x0c // Same as CURSOR_OFF
+#define LCD44780_HOME 0x02
+#define LCD44780_LEFT 0x10
+#define LCD44780_RIGHT 0x14
+
+void lcd44780_wait(void)
+{
+ int i, j;
+ for(i=0; i < 400; i++)
+ for(j=0; j < 10000; j++);
+}
+
+void lcd44780_command(unsigned char c)
+{
+ *LCD44780_COMMAND = c;
+ lcd44780_wait();
+}
+
+void lcd44780_data(unsigned char c)
+{
+ *LCD44780_DATA = c;
+ lcd44780_wait();
+}
+
+void lcd44780_puts(const char* s)
+{
+ int i,j;
+ int pos = 0;
+
+ lcd44780_command(LCD44780_CLEAR);
+ while(*s) {
+ lcd44780_data(*s);
+ s++;
+ pos++;
+ if (pos == 8) {
+ /* We must write 32 of spaces to get cursor to 2nd line */
+ for (j=0; j<32; j++) {
+ lcd44780_data(' ');
+ }
+ }
+ if (pos == 16) {
+ /* We have filled all 16 character positions, so stop
+ outputing data */
+ break;
+ }
+ }
+#ifdef LCD44780_PUTS_PAUSE
+ for(i = 1; i < 2000; i++)
+ lcd44780_wait();
+#endif
+}
+
+void lcd44780_init(void)
+{
+ // The display on the RockHopper is physically a single
+ // 16 char line (two 8 char lines concatenated). bdl
+ lcd44780_command(LCD44780_8BIT_2LINE);
+ lcd44780_command(LCD44780_MODE_INC);
+ lcd44780_command(LCD44780_CURSOR_BLOCK);
+ lcd44780_command(LCD44780_CLEAR);
+}
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.h b/arch/mips/ddb5xxx/ddb5477/lcd44780.h
new file mode 100644
index 0000000..cf2f0f7
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/lcd44780.h
@@ -0,0 +1,15 @@
+/*
+ * lcd44780.h
+ * Simple "driver" for a memory-mapped 44780-style LCD display.
+ *
+ * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+void lcd44780_puts(const char* s);
+void lcd44780_init(void);
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
new file mode 100644
index 0000000..15c6e54
--- /dev/null
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -0,0 +1,405 @@
+/*
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * arch/mips/ddb5xxx/ddb5477/setup.c
+ * Setup file for DDB5477.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/param.h> /* for HZ */
+#include <linux/major.h>
+#include <linux/kdev_t.h>
+#include <linux/root_dev.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/time.h>
+#include <asm/bcache.h>
+#include <asm/irq.h>
+#include <asm/reboot.h>
+#include <asm/gdb-stub.h>
+#include <asm/traps.h>
+#include <asm/debug.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+#include "lcd44780.h"
+
+
+#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
+
+#define SP_TIMER_BASE DDB_SPT1CTRL_L
+#define SP_TIMER_IRQ VRC5477_IRQ_SPT1
+
+static int bus_frequency = CONFIG_DDB5477_BUS_FREQUENCY*1000;
+
+static void ddb_machine_restart(char *command)
+{
+ static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
+
+ u32 t;
+
+ /* PCI cold reset */
+ ddb_pci_reset_bus();
+
+ /* CPU cold reset */
+ t = ddb_in32(DDB_CPUSTAT);
+ db_assert((t&1));
+ ddb_out32(DDB_CPUSTAT, t);
+
+ /* Call the PROM */
+ back_to_prom();
+}
+
+static void ddb_machine_halt(void)
+{
+ printk("DDB Vrc-5477 halted.\n");
+ while (1);
+}
+
+static void ddb_machine_power_off(void)
+{
+ printk("DDB Vrc-5477 halted. Please turn off the power.\n");
+ while (1);
+}
+
+extern void rtc_ds1386_init(unsigned long base);
+
+static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
+{
+ unsigned int freq;
+ unsigned char c;
+ unsigned int t1, t2;
+ unsigned i;
+
+ ddb_out32(SP_TIMER_BASE, 0xffffffff);
+ ddb_out32(SP_TIMER_BASE+4, 0x1);
+ ddb_out32(SP_TIMER_BASE+8, 0xffffffff);
+
+ /* check if rtc is running */
+ c= *(volatile unsigned char*)rtc_base;
+ for(i=0; (c == *(volatile unsigned char*)rtc_base) && (i<100000000); i++);
+ if (c == *(volatile unsigned char*)rtc_base) {
+ printk("Failed to detect bus frequency. Use default 83.3MHz.\n");
+ return 83333000;
+ }
+
+ c= *(volatile unsigned char*)rtc_base;
+ while (c == *(volatile unsigned char*)rtc_base);
+ /* we are now at the turn of 1/100th second, if no error. */
+ t1 = ddb_in32(SP_TIMER_BASE+8);
+
+ for (i=0; i< 10; i++) {
+ c= *(volatile unsigned char*)rtc_base;
+ while (c == *(volatile unsigned char*)rtc_base);
+ /* we are now at the turn of another 1/100th second */
+ t2 = ddb_in32(SP_TIMER_BASE+8);
+ }
+
+ ddb_out32(SP_TIMER_BASE+4, 0x0); /* disable it again */
+
+ freq = (t1 - t2)*10;
+ printk("DDB bus frequency detection : %u \n", freq);
+ return freq;
+}
+
+static void __init ddb_time_init(void)
+{
+ unsigned long rtc_base;
+ unsigned int i;
+
+ /* we have ds1396 RTC chip */
+ if (mips_machtype == MACH_NEC_ROCKHOPPER
+ || mips_machtype == MACH_NEC_ROCKHOPPERII) {
+ rtc_base = KSEG1ADDR(DDB_LCS2_BASE);
+ } else {
+ rtc_base = KSEG1ADDR(DDB_LCS1_BASE);
+ }
+ rtc_ds1386_init(rtc_base);
+
+ /* do we need to do run-time detection of bus speed? */
+ if (bus_frequency == 0) {
+ bus_frequency = detect_bus_frequency(rtc_base);
+ }
+
+ /* mips_hpt_frequency is 1/2 of the cpu core freq */
+ i = (read_c0_config() >> 28 ) & 7;
+ if ((current_cpu_data.cputype == CPU_R5432) && (i == 3))
+ i = 4;
+ mips_hpt_frequency = bus_frequency*(i+4)/4;
+}
+
+extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
+
+static void __init ddb_timer_setup(struct irqaction *irq)
+{
+#if defined(USE_CPU_COUNTER_TIMER)
+
+ /* we are using the cpu counter for timer interrupts */
+ setup_irq(CPU_IRQ_BASE + 7, irq);
+
+#else
+
+ /* if we use Special purpose timer 1 */
+ ddb_out32(SP_TIMER_BASE, bus_frequency/HZ);
+ ddb_out32(SP_TIMER_BASE+4, 0x1);
+ setup_irq(SP_TIMER_IRQ, irq);
+
+#endif
+}
+
+static void ddb5477_board_init(void);
+
+extern struct pci_controller ddb5477_ext_controller;
+extern struct pci_controller ddb5477_io_controller;
+
+static int ddb5477_setup(void)
+{
+ /* initialize board - we don't trust the loader */
+ ddb5477_board_init();
+
+ set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
+
+ board_time_init = ddb_time_init;
+ board_timer_setup = ddb_timer_setup;
+
+ _machine_restart = ddb_machine_restart;
+ _machine_halt = ddb_machine_halt;
+ _machine_power_off = ddb_machine_power_off;
+
+ /* setup resource limits */
+ ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1;
+ iomem_resource.end = 0xffffffff;
+
+ /* Reboot on panic */
+ panic_timeout = 180;
+
+ register_pci_controller (&ddb5477_ext_controller);
+ register_pci_controller (&ddb5477_io_controller);
+
+ return 0;
+}
+
+early_initcall(ddb5477_setup);
+
+static void __init ddb5477_board_init(void)
+{
+ /* ----------- setup PDARs ------------ */
+
+ /* SDRAM should have been set */
+ db_assert(ddb_in32(DDB_SDRAM0) ==
+ ddb_calc_pdar(DDB_SDRAM_BASE, board_ram_size, 32, 0, 1));
+
+ /* SDRAM1 should be turned off. What is this for anyway ? */
+ db_assert( (ddb_in32(DDB_SDRAM1) & 0xf) == 0);
+
+ /* Setup local bus. */
+
+ /* Flash U12 PDAR and timing. */
+ ddb_set_pdar(DDB_LCS0, DDB_LCS0_BASE, DDB_LCS0_SIZE, 16, 0, 0);
+ ddb_out32(DDB_LCST0, 0x00090842);
+
+ /* We need to setup LCS1 and LCS2 differently based on the
+ board_version */
+ if (mips_machtype == MACH_NEC_ROCKHOPPER) {
+ /* Flash U13 PDAR and timing. */
+ ddb_set_pdar(DDB_LCS1, DDB_LCS1_BASE, DDB_LCS1_SIZE, 16, 0, 0);
+ ddb_out32(DDB_LCST1, 0x00090842);
+
+ /* EPLD (NVRAM, switch, LCD, and mezzanie). */
+ ddb_set_pdar(DDB_LCS2, DDB_LCS2_BASE, DDB_LCS2_SIZE, 8, 0, 0);
+ } else {
+ /* misc */
+ ddb_set_pdar(DDB_LCS1, DDB_LCS1_BASE, DDB_LCS1_SIZE, 8, 0, 0);
+ /* mezzanie (?) */
+ ddb_set_pdar(DDB_LCS2, DDB_LCS2_BASE, DDB_LCS2_SIZE, 16, 0, 0);
+ }
+
+ /* verify VRC5477 base addr */
+ db_assert(ddb_in32(DDB_VRC5477) ==
+ ddb_calc_pdar(DDB_VRC5477_BASE, DDB_VRC5477_SIZE, 32, 0, 1));
+
+ /* verify BOOT ROM addr */
+ db_assert(ddb_in32(DDB_BOOTCS) ==
+ ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0));
+
+ /* setup PCI windows - window0 for MEM/config, window1 for IO */
+ ddb_set_pdar(DDB_PCIW0, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1);
+ ddb_set_pdar(DDB_PCIW1, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1);
+ ddb_set_pdar(DDB_IOPCIW0, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1);
+ ddb_set_pdar(DDB_IOPCIW1, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1);
+
+ /* ------------ reset PCI bus and BARs ----------------- */
+ ddb_pci_reset_bus();
+
+ ddb_out32(DDB_BARM010, 0x00000008);
+ ddb_out32(DDB_BARM011, 0x00000008);
+
+ ddb_out32(DDB_BARC0, 0xffffffff);
+ ddb_out32(DDB_BARM230, 0xffffffff);
+ ddb_out32(DDB_BAR00, 0xffffffff);
+ ddb_out32(DDB_BAR10, 0xffffffff);
+ ddb_out32(DDB_BAR20, 0xffffffff);
+ ddb_out32(DDB_BAR30, 0xffffffff);
+ ddb_out32(DDB_BAR40, 0xffffffff);
+ ddb_out32(DDB_BAR50, 0xffffffff);
+ ddb_out32(DDB_BARB0, 0xffffffff);
+
+ ddb_out32(DDB_BARC1, 0xffffffff);
+ ddb_out32(DDB_BARM231, 0xffffffff);
+ ddb_out32(DDB_BAR01, 0xffffffff);
+ ddb_out32(DDB_BAR11, 0xffffffff);
+ ddb_out32(DDB_BAR21, 0xffffffff);
+ ddb_out32(DDB_BAR31, 0xffffffff);
+ ddb_out32(DDB_BAR41, 0xffffffff);
+ ddb_out32(DDB_BAR51, 0xffffffff);
+ ddb_out32(DDB_BARB1, 0xffffffff);
+
+ /*
+ * We use pci master register 0 for memory space / config space
+ * And we use register 1 for IO space.
+ * Note that for memory space, we bump up the pci base address
+ * so that we have 1:1 mapping between PCI memory and cpu physical.
+ * For PCI IO space, it starts from 0 in PCI IO space but with
+ * DDB_xx_IO_BASE in CPU physical address space.
+ */
+ ddb_set_pmr(DDB_PCIINIT00, DDB_PCICMD_MEM, DDB_PCI0_MEM_BASE,
+ DDB_PCI_ACCESS_32);
+ ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
+
+ ddb_set_pmr(DDB_PCIINIT01, DDB_PCICMD_MEM, DDB_PCI1_MEM_BASE,
+ DDB_PCI_ACCESS_32);
+ ddb_set_pmr(DDB_PCIINIT11, DDB_PCICMD_IO, DDB_PCI0_IO_SIZE,
+ DDB_PCI_ACCESS_32);
+
+
+ /* PCI cross window should be set properly */
+ ddb_set_pdar(DDB_BARP00, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1);
+ ddb_set_pdar(DDB_BARP10, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1);
+ ddb_set_pdar(DDB_BARP01, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1);
+ ddb_set_pdar(DDB_BARP11, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1);
+
+ if (mips_machtype == MACH_NEC_ROCKHOPPER
+ || mips_machtype == MACH_NEC_ROCKHOPPERII) {
+ /* Disable bus diagnostics. */
+ ddb_out32(DDB_PCICTL0_L, 0);
+ ddb_out32(DDB_PCICTL0_H, 0);
+ ddb_out32(DDB_PCICTL1_L, 0);
+ ddb_out32(DDB_PCICTL1_H, 0);
+ }
+
+ if (mips_machtype == MACH_NEC_ROCKHOPPER) {
+ u16 vid;
+ struct pci_bus bus;
+ struct pci_dev dev_m1533;
+ extern struct pci_ops ddb5477_ext_pci_ops;
+
+ bus.parent = NULL; /* we scan the top level only */
+ bus.ops = &ddb5477_ext_pci_ops;
+ dev_m1533.bus = &bus;
+ dev_m1533.sysdata = NULL;
+ dev_m1533.devfn = 7*8; // slot 7: M1533 SouthBridge.
+ pci_read_config_word(&dev_m1533, 0, &vid);
+ if (vid == PCI_VENDOR_ID_AL) {
+ printk("Changing mips_machtype to MACH_NEC_ROCKHOPPERII\n");
+ mips_machtype = MACH_NEC_ROCKHOPPERII;
+ }
+ }
+
+ /* enable USB input buffers */
+ ddb_out32(DDB_PIBMISC, 0x00000007);
+
+ /* For dual-function pins, make them all non-GPIO */
+ ddb_out32(DDB_GIUFUNSEL, 0x0);
+ // ddb_out32(DDB_GIUFUNSEL, 0xfe0fcfff); /* NEC recommanded value */
+
+ if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
+
+ /* enable IDE controller on Ali chip (south bridge) */
+ u8 temp8;
+ struct pci_bus bus;
+ struct pci_dev dev_m1533;
+ struct pci_dev dev_m5229;
+ extern struct pci_ops ddb5477_ext_pci_ops;
+
+ /* Setup M1535 registers */
+ bus.parent = NULL; /* we scan the top level only */
+ bus.ops = &ddb5477_ext_pci_ops;
+ dev_m1533.bus = &bus;
+ dev_m1533.sysdata = NULL;
+ dev_m1533.devfn = 7*8; // slot 7: M1533 SouthBridge.
+
+ /* setup IDE controller
+ * enable IDE controller (bit 6 - 1)
+ * IDE IDSEL to be addr:A15 (bit 4:5 - 11)
+ * disable IDE ATA Secondary Bus Signal Pad Control (bit 3 - 0)
+ * enable IDE ATA Primary Bus Signal Pad Control (bit 2 - 1)
+ */
+ pci_write_config_byte(&dev_m1533, 0x58, 0x74);
+
+ /*
+ * positive decode (bit6 -0)
+ * enable IDE controler interrupt (bit 4 -1)
+ * setup SIRQ to point to IRQ 14 (bit 3:0 - 1101)
+ */
+ pci_write_config_byte(&dev_m1533, 0x44, 0x1d);
+
+ /* Setup M5229 registers */
+ dev_m5229.bus = &bus;
+ dev_m5229.sysdata = NULL;
+ dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE
+
+ /*
+ * enable IDE in the M5229 config register 0x50 (bit 0 - 1)
+ * M5229 IDSEL is addr:15; see above setting
+ */
+ pci_read_config_byte(&dev_m5229, 0x50, &temp8);
+ pci_write_config_byte(&dev_m5229, 0x50, temp8 | 0x1);
+
+ /*
+ * enable bus master (bit 2) and IO decoding (bit 0)
+ */
+ pci_read_config_byte(&dev_m5229, 0x04, &temp8);
+ pci_write_config_byte(&dev_m5229, 0x04, temp8 | 0x5);
+
+ /*
+ * enable native, copied from arch/ppc/k2boot/head.S
+ * TODO - need volatile, need to be portable
+ */
+ pci_write_config_byte(&dev_m5229, 0x09, 0xef);
+
+ /* Set Primary Channel Command Block Timing */
+ pci_write_config_byte(&dev_m5229, 0x59, 0x31);
+
+ /*
+ * Enable primary channel 40-pin cable
+ * M5229 register 0x4a (bit 0)
+ */
+ pci_read_config_byte(&dev_m5229, 0x4a, &temp8);
+ pci_write_config_byte(&dev_m5229, 0x4a, temp8 | 0x1);
+ }
+
+ if (mips_machtype == MACH_NEC_ROCKHOPPER
+ || mips_machtype == MACH_NEC_ROCKHOPPERII) {
+ printk("lcd44780: initializing\n");
+ lcd44780_init();
+ lcd44780_puts("MontaVista Linux");
+ }
+}