diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile
new file mode 100644
index 0000000..0e7853f
--- /dev/null
+++ b/arch/mips/ite-boards/generic/Makefile
@@ -0,0 +1,15 @@
+#
+#  Copyright 2000 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
+#
+
+obj-y			+= it8172_setup.o irq.o int-handler.o pmon_prom.o \
+			   time.o lpc.o puts.o reset.o
+
+obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o
+obj-$(CONFIG_KGDB)	+= dbg_io.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
new file mode 100644
index 0000000..c4f8530
--- /dev/null
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -0,0 +1,125 @@
+
+#include <linux/config.h>
+
+#ifdef CONFIG_KGDB
+
+/* --- CONFIG --- */
+
+/* we need uint32 uint8 */
+/* #include "types.h" */
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+/* --- END OF CONFIG --- */
+
+#define         UART16550_BAUD_2400             2400
+#define         UART16550_BAUD_4800             4800
+#define         UART16550_BAUD_9600             9600
+#define         UART16550_BAUD_19200            19200
+#define         UART16550_BAUD_38400            38400
+#define         UART16550_BAUD_57600            57600
+#define         UART16550_BAUD_115200           115200
+
+#define         UART16550_PARITY_NONE           0
+#define         UART16550_PARITY_ODD            0x08
+#define         UART16550_PARITY_EVEN           0x18
+#define         UART16550_PARITY_MARK           0x28
+#define         UART16550_PARITY_SPACE          0x38
+
+#define         UART16550_DATA_5BIT             0x0
+#define         UART16550_DATA_6BIT             0x1
+#define         UART16550_DATA_7BIT             0x2
+#define         UART16550_DATA_8BIT             0x3
+
+#define         UART16550_STOP_1BIT             0x0
+#define         UART16550_STOP_2BIT             0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [stevel] we use the IT8712 serial port for kgdb */
+#define	DEBUG_BASE  0xB40003F8	/* 8712 serial port 1 base address */
+#define MAX_BAUD    115200
+
+/* === END OF CONFIG === */
+
+/* register offset */
+#define         OFS_RCV_BUFFER          0
+#define         OFS_TRANS_HOLD          0
+#define         OFS_SEND_BUFFER         0
+#define         OFS_INTR_ENABLE         1
+#define         OFS_INTR_ID             2
+#define         OFS_DATA_FORMAT         3
+#define         OFS_LINE_CONTROL        3
+#define         OFS_MODEM_CONTROL       4
+#define         OFS_RS232_OUTPUT        4
+#define         OFS_LINE_STATUS         5
+#define         OFS_MODEM_STATUS        6
+#define         OFS_RS232_INPUT         6
+#define         OFS_SCRATCH_PAD         7
+
+#define         OFS_DIVISOR_LSB         0
+#define         OFS_DIVISOR_MSB         1
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y)    (*((volatile uint8*)(DEBUG_BASE + y)))
+#define UART16550_WRITE(y,z) ((*((volatile uint8*)(DEBUG_BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+	/* disable interrupts */
+	UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+	/* set up buad rate */
+	{
+		uint32 divisor;
+
+		/* set DIAB bit */
+		UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+		/* set divisor */
+		divisor = MAX_BAUD / baud;
+		UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+		UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+		/* clear DIAB bit */
+		UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+	}
+
+	/* set data format */
+	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_115200,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+	}
+
+	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+	return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_115200,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+	}
+
+	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+	UART16550_WRITE(OFS_SEND_BUFFER, byte);
+	return 1;
+}
+
+#endif
diff --git a/arch/mips/ite-boards/generic/int-handler.S b/arch/mips/ite-boards/generic/int-handler.S
new file mode 100644
index 0000000..d190d8a
--- /dev/null
+++ b/arch/mips/ite-boards/generic/int-handler.S
@@ -0,0 +1,63 @@
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+	.text
+	.set    macro
+	.set    noat
+	.align	5
+
+NESTED(it8172_IRQ, PT_SIZE, sp)
+	SAVE_ALL
+	CLI				# Important: mark KERNEL mode !
+
+        /* We're working with 'reorder' set at this point. */
+	/*
+	 * Get pending interrupts
+	 */
+
+	mfc0	t0,CP0_CAUSE		# get pending interrupts
+	mfc0	t1,CP0_STATUS		# get enabled interrupts
+	and	t0,t1			# isolate allowed ones
+
+	andi	t0,0xff00		# isolate pending bits
+        beqz    t0, 3f                  # spurious interrupt
+
+        andi    a0, t0, CAUSEF_IP7
+        beq     a0, zero, 1f
+
+        li	a0, 127			# MIPS_CPU_TIMER_IRQ = (NR_IRQS-1)
+        move    a1, sp
+        jal     ll_timer_interrupt
+	j	ret_from_irq
+        nop
+
+1:
+        andi    a0, t0, CAUSEF_IP2      # the only int we expect at this time
+        beq     a0, zero, 3f
+	move	a0,sp
+	jal	it8172_hw0_irqdispatch
+
+	mfc0	t0,CP0_STATUS		# disable interrupts
+	ori	t0,1
+	xori	t0,1
+	mtc0	t0,CP0_STATUS
+        nop
+        nop
+        nop
+
+	la      a1, ret_from_irq
+	jr	a1
+        nop
+
+3:
+	move a0, sp
+	jal	mips_spurious_interrupt
+        nop
+	la      a1, ret_from_irq
+	jr	a1
+        nop
+
+END(it8172_IRQ)
+
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
new file mode 100644
index 0000000..cb71b90
--- /dev/null
+++ b/arch/mips/ite-boards/generic/irq.c
@@ -0,0 +1,304 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	ITE 8172G interrupt/setup routines.
+ *
+ * Copyright 2000,2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * Part of this file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/atlas/atlas_int.c.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/serial_reg.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_int.h>
+#include <asm/it8172/it8172_dbg.h>
+
+/* revisit */
+#define EXT_IRQ0_TO_IP 2 /* IP 2 */
+#define EXT_IRQ5_TO_IP 7 /* IP 7 */
+
+#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
+
+void disable_it8172_irq(unsigned int irq_nr);
+void enable_it8172_irq(unsigned int irq_nr);
+
+extern void set_debug_traps(void);
+extern void mips_timer_interrupt(int irq, struct pt_regs *regs);
+extern asmlinkage void it8172_IRQ(void);
+
+struct it8172_intc_regs volatile *it8172_hw0_icregs =
+	(struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));
+
+static void disable_it8172_irq(unsigned int irq_nr)
+{
+	if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
+		/* LPC interrupt */
+		it8172_hw0_icregs->lpc_mask |=
+			(1 << (irq_nr - IT8172_LPC_IRQ_BASE));
+	} else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
+		/* Local Bus interrupt */
+		it8172_hw0_icregs->lb_mask |=
+			(1 << (irq_nr - IT8172_LB_IRQ_BASE));
+	} else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
+		/* PCI and other interrupts */
+		it8172_hw0_icregs->pci_mask |=
+			(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
+	} else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
+		/* NMI interrupts */
+		it8172_hw0_icregs->nmi_mask |=
+			(1 << (irq_nr - IT8172_NMI_IRQ_BASE));
+	} else {
+		panic("disable_it8172_irq: bad irq %d", irq_nr);
+	}
+}
+
+static void enable_it8172_irq(unsigned int irq_nr)
+{
+	if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
+		/* LPC interrupt */
+		it8172_hw0_icregs->lpc_mask &=
+			~(1 << (irq_nr - IT8172_LPC_IRQ_BASE));
+	}
+	else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
+		/* Local Bus interrupt */
+		it8172_hw0_icregs->lb_mask &=
+			~(1 << (irq_nr - IT8172_LB_IRQ_BASE));
+	}
+	else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
+		/* PCI and other interrupts */
+		it8172_hw0_icregs->pci_mask &=
+			~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
+	}
+	else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
+		/* NMI interrupts */
+		it8172_hw0_icregs->nmi_mask &=
+			~(1 << (irq_nr - IT8172_NMI_IRQ_BASE));
+	}
+	else {
+		panic("enable_it8172_irq: bad irq %d", irq_nr);
+	}
+}
+
+static unsigned int startup_ite_irq(unsigned int irq)
+{
+	enable_it8172_irq(irq);
+	return 0;
+}
+
+#define shutdown_ite_irq	disable_it8172_irq
+#define mask_and_ack_ite_irq    disable_it8172_irq
+
+static void end_ite_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_it8172_irq(irq);
+}
+
+static struct hw_interrupt_type it8172_irq_type = {
+	"ITE8172",
+	startup_ite_irq,
+	shutdown_ite_irq,
+	enable_it8172_irq,
+	disable_it8172_irq,
+	mask_and_ack_ite_irq,
+	end_ite_irq,
+	NULL
+};
+
+
+static void enable_none(unsigned int irq) { }
+static unsigned int startup_none(unsigned int irq) { return 0; }
+static void disable_none(unsigned int irq) { }
+static void ack_none(unsigned int irq) { }
+
+/* startup is the same as "enable", shutdown is same as "disable" */
+#define shutdown_none	disable_none
+#define end_none	enable_none
+
+static struct hw_interrupt_type cp0_irq_type = {
+	"CP0 Count",
+	startup_none,
+	shutdown_none,
+	enable_none,
+	disable_none,
+	ack_none,
+	end_none
+};
+
+void enable_cpu_timer(void)
+{
+        unsigned long flags;
+
+        local_irq_save(flags);
+	set_c0_status(0x100 << EXT_IRQ5_TO_IP);
+        local_irq_restore(flags);
+}
+
+void __init arch_init_irq(void)
+{
+	int i;
+        unsigned long flags;
+
+        memset(irq_desc, 0, sizeof(irq_desc));
+        set_except_vector(0, it8172_IRQ);
+
+	/* mask all interrupts */
+	it8172_hw0_icregs->lb_mask  = 0xffff;
+	it8172_hw0_icregs->lpc_mask = 0xffff;
+	it8172_hw0_icregs->pci_mask = 0xffff;
+	it8172_hw0_icregs->nmi_mask = 0xffff;
+
+	/* make all interrupts level triggered */
+	it8172_hw0_icregs->lb_trigger  = 0;
+	it8172_hw0_icregs->lpc_trigger = 0;
+	it8172_hw0_icregs->pci_trigger = 0;
+	it8172_hw0_icregs->nmi_trigger = 0;
+
+	/* active level setting */
+	/* uart, keyboard, and mouse are active high */
+	it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000);
+	it8172_hw0_icregs->lb_level |= 0x20;
+
+	/* keyboard and mouse are edge triggered */
+	it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000);
+
+
+#if 0
+	// Enable this piece of code to make internal USB interrupt
+	// edge triggered.
+	it8172_hw0_icregs->pci_trigger |=
+		(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
+	it8172_hw0_icregs->pci_level &=
+		~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
+#endif
+
+	for (i = 0; i <= IT8172_LAST_IRQ; i++) {
+		irq_desc[i].handler = &it8172_irq_type;
+		spin_lock_init(&irq_desc[i].lock);
+	}
+	irq_desc[MIPS_CPU_TIMER_IRQ].handler = &cp0_irq_type;
+	set_c0_status(ALLINTS_NOTIMER);
+}
+
+void mips_spurious_interrupt(struct pt_regs *regs)
+{
+#if 1
+	return;
+#else
+	unsigned long status, cause;
+
+	printk("got spurious interrupt\n");
+	status = read_c0_status();
+	cause = read_c0_cause();
+	printk("status %x cause %x\n", status, cause);
+	printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr);
+#endif
+}
+
+void it8172_hw0_irqdispatch(struct pt_regs *regs)
+{
+	int irq;
+	unsigned short intstatus = 0, status = 0;
+
+	intstatus = it8172_hw0_icregs->intstatus;
+	if (intstatus & 0x8) {
+		panic("Got NMI interrupt");
+	} else if (intstatus & 0x4) {
+		/* PCI interrupt */
+		irq = 0;
+		status |= it8172_hw0_icregs->pci_req;
+		while (!(status & 0x1)) {
+			irq++;
+			status >>= 1;
+		}
+		irq += IT8172_PCI_DEV_IRQ_BASE;
+	} else if (intstatus & 0x1) {
+		/* Local Bus interrupt */
+		irq = 0;
+		status |= it8172_hw0_icregs->lb_req;
+		while (!(status & 0x1)) {
+			irq++;
+			status >>= 1;
+		}
+		irq += IT8172_LB_IRQ_BASE;
+	} else if (intstatus & 0x2) {
+		/* LPC interrupt */
+		/* Since some lpc interrupts are edge triggered,
+		 * we could lose an interrupt this way because
+		 * we acknowledge all ints at onces. Revisit.
+		 */
+		status |= it8172_hw0_icregs->lpc_req;
+		it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */
+		irq = 0;
+		while (!(status & 0x1)) {
+			irq++;
+			status >>= 1;
+		}
+		irq += IT8172_LPC_IRQ_BASE;
+	} else
+		return;
+
+	do_IRQ(irq, regs);
+}
+
+void show_pending_irqs(void)
+{
+	fputs("intstatus:  ");
+	put32(it8172_hw0_icregs->intstatus);
+	puts("");
+
+	fputs("pci_req:  ");
+	put32(it8172_hw0_icregs->pci_req);
+	puts("");
+
+	fputs("lb_req:  ");
+	put32(it8172_hw0_icregs->lb_req);
+	puts("");
+
+	fputs("lpc_req:  ");
+	put32(it8172_hw0_icregs->lpc_req);
+	puts("");
+}
diff --git a/arch/mips/ite-boards/generic/it8172_cir.c b/arch/mips/ite-boards/generic/it8172_cir.c
new file mode 100644
index 0000000..19deb15
--- /dev/null
+++ b/arch/mips/ite-boards/generic/it8172_cir.c
@@ -0,0 +1,171 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	IT8172 Consumer IR port generic routines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_IT8172_CIR
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_cir.h>
+
+
+volatile struct it8172_cir_regs *cir_regs[NUM_CIR_PORTS] = {
+	(volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR0_BASE)),
+	(volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR1_BASE))};
+
+
+/*
+ * Initialize Consumer IR Port.
+ */
+int cir_port_init(struct cir_port *cir)
+{
+	int port = cir->port;
+	unsigned char data;
+
+	/* set baud rate */
+	cir_regs[port]->bdlr = cir->baud_rate & 0xff;
+	cir_regs[port]->bdhr = (cir->baud_rate >> 8) & 0xff;
+
+	/* set receiver control register */
+	cir_regs[port]->rcr = (CIR_SET_RDWOS(cir->rdwos) | CIR_SET_RXDCR(cir->rxdcr));
+
+	/* set carrier frequency register */
+	cir_regs[port]->cfr = (CIR_SET_CF(cir->cfq) | CIR_SET_HS(cir->hcfs));
+
+	/* set fifo threshold */
+	data = cir_regs[port]->mstcr & 0xf3;
+	data |= CIR_SET_FIFO_TL(cir->fifo_tl);
+	cir_regs[port]->mstcr = data;
+
+	clear_fifo(cir);
+	enable_receiver(cir);
+	disable_rx_demodulation(cir);
+
+	set_rx_active(cir);
+	int_enable(cir);
+	rx_int_enable(cir);
+
+	return 0;
+}
+
+
+void clear_fifo(struct cir_port *cir)
+{
+	cir_regs[cir->port]->mstcr |= CIR_FIFO_CLEAR;
+}
+
+void enable_receiver(struct cir_port *cir)
+{
+	cir_regs[cir->port]->rcr |= CIR_RXEN;
+}
+
+void disable_receiver(struct cir_port *cir)
+{
+	cir_regs[cir->port]->rcr &= ~CIR_RXEN;
+}
+
+void enable_rx_demodulation(struct cir_port *cir)
+{
+	cir_regs[cir->port]->rcr |= CIR_RXEND;
+}
+
+void disable_rx_demodulation(struct cir_port *cir)
+{
+	cir_regs[cir->port]->rcr &= ~CIR_RXEND;
+}
+
+void set_rx_active(struct cir_port *cir)
+{
+	cir_regs[cir->port]->rcr |= CIR_RXACT;
+}
+
+void int_enable(struct cir_port *cir)
+{
+	cir_regs[cir->port]->ier |= CIR_IEC;
+}
+
+void rx_int_enable(struct cir_port *cir)
+{
+	cir_regs[cir->port]->ier |= CIR_RDAIE;
+}
+
+void dump_regs(struct cir_port *cir)
+{
+	printk("mstcr %x ier %x iir %x cfr %x rcr %x tcr %x tfsr %x rfsr %x\n",
+	cir_regs[cir->port]->mstcr,
+	cir_regs[cir->port]->ier,
+	cir_regs[cir->port]->iir,
+	cir_regs[cir->port]->cfr,
+	cir_regs[cir->port]->rcr,
+	cir_regs[cir->port]->tcr,
+	cir_regs[cir->port]->tfsr,
+	cir_regs[cir->port]->rfsr);
+
+	while (cir_regs[cir->port]->iir & CIR_RDAI) {
+		printk("data %x\n", cir_regs[cir->port]->dr);
+	}
+}
+
+void dump_reg_addr(struct cir_port *cir)
+{
+	printk("dr %x mstcr %x ier %x iir %x cfr %x rcr %x tcr %x bdlr %x bdhr %x tfsr %x rfsr %x\n",
+	(unsigned)&cir_regs[cir->port]->dr,
+	(unsigned)&cir_regs[cir->port]->mstcr,
+	(unsigned)&cir_regs[cir->port]->ier,
+	(unsigned)&cir_regs[cir->port]->iir,
+	(unsigned)&cir_regs[cir->port]->cfr,
+	(unsigned)&cir_regs[cir->port]->rcr,
+	(unsigned)&cir_regs[cir->port]->tcr,
+	(unsigned)&cir_regs[cir->port]->bdlr,
+	(unsigned)&cir_regs[cir->port]->bdhr,
+	(unsigned)&cir_regs[cir->port]->tfsr,
+	(unsigned)&cir_regs[cir->port]->rfsr);
+}
+
+int cir_get_rx_count(struct cir_port *cir)
+{
+	return cir_regs[cir->port]->rfsr & CIR_RXFBC_MASK;
+}
+
+char cir_read_data(struct cir_port *cir)
+{
+	return cir_regs[cir->port]->dr;
+}
+
+char get_int_status(struct cir_port *cir)
+{
+	return cir_regs[cir->port]->iir;
+}
+#endif
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
new file mode 100644
index 0000000..d808a67
--- /dev/null
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -0,0 +1,309 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	IT8172/QED5231 board setup.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/serial_reg.h>
+#include <linux/major.h>
+#include <linux/kdev_t.h>
+#include <linux/root_dev.h>
+
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8712.h>
+
+extern struct resource ioport_resource;
+#ifdef CONFIG_SERIO_I8042
+int init_8712_keyboard(void);
+#endif
+
+extern int SearchIT8712(void);
+extern void InitLPCInterface(void);
+extern char * __init prom_getcmdline(void);
+extern void it8172_restart(char *command);
+extern void it8172_halt(void);
+extern void it8172_power_off(void);
+
+extern void (*board_time_init)(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+extern void it8172_time_init(void);
+extern void it8172_timer_setup(struct irqaction *irq);
+
+#ifdef CONFIG_IT8172_REVC
+struct {
+    struct resource ram;
+    struct resource pci_mem;
+    struct resource pci_io;
+    struct resource flash;
+    struct resource boot;
+} it8172_resources = {
+    { "RAM",           0,          0,          IORESOURCE_MEM }, /* to be initted */
+    { "PCI Mem",       0x10000000, 0x13FFFFFF, IORESOURCE_MEM },
+    { "PCI I/O",       0x14000000, 0x17FFFFFF                 },
+    { "Flash",         0x08000000, 0x0CFFFFFF                 },
+    { "Boot ROM",      0x1FC00000, 0x1FFFFFFF                 }
+};
+#else
+struct {
+    struct resource ram;
+    struct resource pci_mem0;
+    struct resource pci_mem1;
+    struct resource pci_io;
+    struct resource pci_mem2;
+    struct resource pci_mem3;
+    struct resource flash;
+    struct resource boot;
+} it8172_resources = {
+    { "RAM",           0,          0,          IORESOURCE_MEM }, /* to be initted */
+    { "PCI Mem0",      0x0C000000, 0x0FFFFFFF, IORESOURCE_MEM },
+    { "PCI Mem1",      0x10000000, 0x13FFFFFF, IORESOURCE_MEM },
+    { "PCI I/O",       0x14000000, 0x17FFFFFF                 },
+    { "PCI Mem2",      0x1A000000, 0x1BFFFFFF, IORESOURCE_MEM },
+    { "PCI Mem3",      0x1C000000, 0x1FBFFFFF, IORESOURCE_MEM },
+    { "Flash",         0x08000000, 0x0CFFFFFF                 },
+    { "Boot ROM",      0x1FC00000, 0x1FFFFFFF                 }
+};
+#endif
+
+
+void __init it8172_init_ram_resource(unsigned long memsize)
+{
+	it8172_resources.ram.end = memsize;
+}
+
+static void __init it8172_setup(void)
+{
+	unsigned short dsr;
+	char *argptr;
+
+	argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_CONSOLE
+	if ((argptr = strstr(argptr, "console=")) == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
+	clear_c0_status(ST0_FR);
+
+	board_time_init = it8172_time_init;
+	board_timer_setup = it8172_timer_setup;
+
+	_machine_restart = it8172_restart;
+	_machine_halt = it8172_halt;
+	_machine_power_off = it8172_power_off;
+
+	/*
+	 * IO/MEM resources.
+	 * 
+	 * revisit this area.
+	 */
+	set_io_port_base(KSEG1);
+	ioport_resource.start = it8172_resources.pci_io.start;
+	ioport_resource.end = it8172_resources.pci_io.end;
+#ifdef CONFIG_IT8172_REVC
+	iomem_resource.start = it8172_resources.pci_mem.start;
+	iomem_resource.end = it8172_resources.pci_mem.end;
+#else
+	iomem_resource.start = it8172_resources.pci_mem0.start;
+	iomem_resource.end = it8172_resources.pci_mem3.end;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	ROOT_DEV = Root_RAM0;
+#endif
+
+	/*
+	 * Pull enabled devices out of standby
+	 */
+	IT_IO_READ16(IT_PM_DSR, dsr);
+
+	/*
+	 * Fixme: This breaks when these drivers are modules!!!
+	 */
+#ifdef CONFIG_SOUND_IT8172
+	dsr &= ~IT_PM_DSR_ACSB;
+#else
+	dsr |= IT_PM_DSR_ACSB;
+#endif
+#ifdef CONFIG_BLK_DEV_IT8172
+	dsr &= ~IT_PM_DSR_IDESB;
+#else
+	dsr |= IT_PM_DSR_IDESB;
+#endif
+	IT_IO_WRITE16(IT_PM_DSR, dsr);
+
+	InitLPCInterface();
+
+#ifdef CONFIG_MIPS_ITE8172
+	if (SearchIT8712()) {
+		printk("Found IT8712 Super IO\n");
+		/* enable IT8712 serial port */
+		LPCSetConfig(LDN_SERIAL1, 0x30, 0x01); /* enable */
+		LPCSetConfig(LDN_SERIAL1, 0x23, 0x01); /* clock selection */
+#ifdef CONFIG_SERIO_I8042
+		if (init_8712_keyboard()) {
+			printk("Unable to initialize keyboard\n");
+			LPCSetConfig(LDN_KEYBOARD, 0x30, 0x0); /* disable keyboard */
+		} else {
+			LPCSetConfig(LDN_KEYBOARD, 0x30, 0x1); /* enable keyboard */
+			LPCSetConfig(LDN_KEYBOARD, 0xf0, 0x2);
+			LPCSetConfig(LDN_KEYBOARD, 0x71, 0x3);
+
+			LPCSetConfig(LDN_MOUSE, 0x30, 0x1); /* enable mouse */
+
+			LPCSetConfig(0x4, 0x30, 0x1);
+			LPCSetConfig(0x4, 0xf4, LPCGetConfig(0x4, 0xf4) | 0x80);
+
+			if ((LPCGetConfig(LDN_KEYBOARD, 0x30) == 0) ||
+					(LPCGetConfig(LDN_MOUSE, 0x30) == 0))
+				printk("Error: keyboard or mouse not enabled\n");
+
+		}
+#endif
+	}
+	else {
+		printk("IT8712 Super IO not found\n");
+	}
+#endif
+
+#ifdef CONFIG_IT8172_CIR
+	{
+		unsigned long data;
+		//printk("Enabling CIR0\n");
+		IT_IO_READ16(IT_PM_DSR, data);
+		data &= ~IT_PM_DSR_CIR0SB;
+		IT_IO_WRITE16(IT_PM_DSR, data);
+		//printk("DSR register: %x\n", (unsigned)IT_IO_READ16(IT_PM_DSR, data));
+	}
+#endif
+#ifdef CONFIG_IT8172_SCR0
+	{
+		unsigned i;
+		/* Enable Smart Card Reader 0 */
+		/* First power it up */
+		IT_IO_READ16(IT_PM_DSR, i);
+		i &= ~IT_PM_DSR_SCR0SB;
+		IT_IO_WRITE16(IT_PM_DSR, i);
+		/* Then initialize its registers */
+		outb(( IT_SCR_SFR_GATE_UART_OFF     << IT_SCR_SFR_GATE_UART_BIT
+		      |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
+		      |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
+		      |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
+		      |IT_SCR_SFR_ENABLE_ON         << IT_SCR_SFR_ENABLE_BIT),
+		     IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SFR);
+		outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
+		     IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SCDR);
+	}
+#endif /* CONFIG_IT8172_SCR0 */
+#ifdef CONFIG_IT8172_SCR1
+	{
+		unsigned i;
+		/* Enable Smart Card Reader 1 */
+		/* First power it up */
+		IT_IO_READ16(IT_PM_DSR, i);
+		i &= ~IT_PM_DSR_SCR1SB;
+		IT_IO_WRITE16(IT_PM_DSR, i);
+		/* Then initialize its registers */
+		outb(( IT_SCR_SFR_GATE_UART_OFF     << IT_SCR_SFR_GATE_UART_BIT
+		      |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
+		      |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
+		      |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
+		      |IT_SCR_SFR_ENABLE_ON         << IT_SCR_SFR_ENABLE_BIT),
+		     IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SFR);
+		outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
+		     IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SCDR);
+	}
+#endif /* CONFIG_IT8172_SCR1 */
+}
+
+early_initcall(it8172_setup);
+
+#ifdef CONFIG_SERIO_I8042
+/*
+ * According to the ITE Special BIOS Note for waking up the
+ * keyboard controller...
+ */
+static int init_8712_keyboard(void)
+{
+	unsigned int cmd_port = 0x14000064;
+	unsigned int data_port = 0x14000060;
+	                         ^^^^^^^^^^^
+	Somebody here doesn't grok the concept of io ports.
+
+	unsigned char data;
+	int i;
+
+	outb(0xaa, cmd_port); /* send self-test cmd */
+	i = 0;
+	while (!(inb(cmd_port) & 0x1)) { /* wait output buffer full */
+		i++;
+		if (i > 0xffffff)
+			return 1;
+	}
+
+	data = inb(data_port);
+	outb(0xcb, cmd_port); /* set ps2 mode */
+	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+		i++;
+		if (i > 0xffffff)
+			return 1;
+	}
+	outb(0x01, data_port);
+	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+		i++;
+		if (i > 0xffffff)
+			return 1;
+	}
+
+	outb(0x60, cmd_port); /* write 8042 command byte */
+	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+		i++;
+		if (i > 0xffffff)
+			return 1;
+	}
+	outb(0x45, data_port); /* at interface, keyboard enabled, system flag */
+	while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+		i++;
+		if (i > 0xffffff)
+			return 1;
+	}
+
+	outb(0xae, cmd_port); /* enable interface */
+	return 0;
+}
+#endif
diff --git a/arch/mips/ite-boards/generic/lpc.c b/arch/mips/ite-boards/generic/lpc.c
new file mode 100644
index 0000000..cc7584f
--- /dev/null
+++ b/arch/mips/ite-boards/generic/lpc.c
@@ -0,0 +1,144 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	ITE Semi IT8712 Super I/O functions.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/it8712.h>
+#include <asm/it8172/it8172.h>
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+void LPCEnterMBPnP(void)
+{
+	int i;
+	unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
+
+	for (i = 0; i<4; i++)
+		outb(key[i], LPC_KEY_ADDR);
+
+}
+
+void LPCExitMBPnP(void)
+{
+	outb(0x02, LPC_KEY_ADDR);
+	outb(0x02, LPC_DATA_ADDR);
+}
+
+void LPCSetConfig(char LdnNumber, char Index, char data)
+{
+	LPCEnterMBPnP();				// Enter IT8712 MB PnP mode
+	outb(0x07, LPC_KEY_ADDR);
+	outb(LdnNumber, LPC_DATA_ADDR);
+	outb(Index, LPC_KEY_ADDR);
+	outb(data, LPC_DATA_ADDR);
+	LPCExitMBPnP();
+}
+
+char LPCGetConfig(char LdnNumber, char Index)
+{
+	char rtn;
+
+	LPCEnterMBPnP();				// Enter IT8712 MB PnP mode
+	outb(0x07, LPC_KEY_ADDR);
+	outb(LdnNumber, LPC_DATA_ADDR);
+	outb(Index, LPC_KEY_ADDR);
+	rtn = inb(LPC_DATA_ADDR);
+	LPCExitMBPnP();
+	return rtn;
+}
+
+int SearchIT8712(void)
+{
+	unsigned char Id1, Id2;
+	unsigned short Id;
+
+	LPCEnterMBPnP();
+	outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */
+	Id1 = inb(LPC_DATA_ADDR);
+	outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */
+	Id2 = inb(LPC_DATA_ADDR);
+	Id = (Id1 << 8) | Id2;
+	LPCExitMBPnP();
+	if (Id == 0x8712)
+		return TRUE;
+	else
+		return FALSE;
+}
+
+void InitLPCInterface(void)
+{
+	unsigned char bus, dev_fn;
+	unsigned long data;
+
+	bus = 0;
+	dev_fn = 1<<3 | 4;
+
+
+	/* pci cmd, SERR# Enable */
+	IT_WRITE(IT_CONFADDR,
+		 (bus         << IT_BUSNUM_SHF)   |
+		 (dev_fn      << IT_FUNCNUM_SHF) |
+		 ((0x4 / 4) << IT_REGNUM_SHF));
+	IT_READ(IT_CONFDATA, data);
+	data |= 0x0100;
+	IT_WRITE(IT_CONFADDR,
+		 (bus         << IT_BUSNUM_SHF)   |
+		 (dev_fn      << IT_FUNCNUM_SHF) |
+		 ((0x4 / 4) << IT_REGNUM_SHF));
+	IT_WRITE(IT_CONFDATA, data);
+
+	/* setup serial irq control register */
+	IT_WRITE(IT_CONFADDR,
+		 (bus         << IT_BUSNUM_SHF)   |
+		 (dev_fn      << IT_FUNCNUM_SHF) |
+		 ((0x48 / 4) << IT_REGNUM_SHF));
+	IT_READ(IT_CONFDATA, data);
+	data  = (data & 0xffff00ff) | 0xc400;
+	IT_WRITE(IT_CONFADDR,
+		 (bus         << IT_BUSNUM_SHF)   |
+		 (dev_fn      << IT_FUNCNUM_SHF) |
+		 ((0x48 / 4) << IT_REGNUM_SHF));
+	IT_WRITE(IT_CONFDATA, data);
+
+
+	/* Enable I/O Space Subtractive Decode */
+	/* default 0x4C is 0x3f220000 */
+	IT_WRITE(IT_CONFADDR,
+		 (bus         << IT_BUSNUM_SHF)   |
+		 (dev_fn      << IT_FUNCNUM_SHF) |
+		 ((0x4C / 4) << IT_REGNUM_SHF));
+	IT_WRITE(IT_CONFDATA, 0x3f2200f3);
+}
diff --git a/arch/mips/ite-boards/generic/pmon_prom.c b/arch/mips/ite-boards/generic/pmon_prom.c
new file mode 100644
index 0000000..6e505af
--- /dev/null
+++ b/arch/mips/ite-boards/generic/pmon_prom.c
@@ -0,0 +1,136 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *    PROM library initialisation code, assuming a version of
+ *    pmon is the boot code.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ * This file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/xx files.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
+
+typedef struct
+{
+    char *name;
+/*    char *val; */
+}t_env_var;
+
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+void  __init prom_init_cmdline(void)
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while(actr < prom_argc) {
+	        strcpy(cp, prom_argv[actr]);
+		cp += strlen(prom_argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+		--cp;
+	*cp = '\0';
+
+}
+
+
+char *prom_getenv(char *envname)
+{
+	/*
+	 * Return a pointer to the given environment variable.
+	 * Environment variables are stored in the form of "memsize=64".
+	 */
+
+	t_env_var *env = (t_env_var *)prom_envp;
+	int i;
+
+	i = strlen(envname);
+
+	while(env->name) {
+		if(strncmp(envname, env->name, i) == 0) {
+			return(env->name + strlen(envname) + 1);
+		}
+		env++;
+	}
+	return(NULL);
+}
+
+static inline unsigned char str2hexnum(unsigned char c)
+{
+	if(c >= '0' && c <= '9')
+	return c - '0';
+	if(c >= 'a' && c <= 'f')
+	return c - 'a' + 10;
+	return 0; /* foo */
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+unsigned long __init prom_get_memsize(void)
+{
+	char *memsize_str;
+	unsigned int memsize;
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+#ifdef CONFIG_MIPS_ITE8172
+		memsize = 32;
+#elif defined(CONFIG_MIPS_IVR)
+		memsize = 64;
+#else
+		memsize = 8;
+#endif
+		printk("memsize unknown: setting to %dMB\n", memsize);
+	} else {
+		printk("memsize: %s\n", memsize_str);
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	return memsize;
+}
diff --git a/arch/mips/ite-boards/generic/puts.c b/arch/mips/ite-boards/generic/puts.c
new file mode 100644
index 0000000..20b02df
--- /dev/null
+++ b/arch/mips/ite-boards/generic/puts.c
@@ -0,0 +1,139 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Low level uart routines to directly access a 16550 uart.
+ *
+ * Copyright 2000,2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+
+#define SERIAL_BASE   0xB4011800	/* it8172 */
+#define SER_CMD       5
+#define SER_DATA      0x00
+#define TX_BUSY       0x20
+
+#define TIMEOUT       0xffff
+#undef SLOW_DOWN
+
+static const char digits[16] = "0123456789abcdef";
+static volatile unsigned char *const com1 = (unsigned char *) SERIAL_BASE;
+
+
+#ifdef SLOW_DOWN
+static inline void slow_down()
+{
+	int k;
+	for (k = 0; k < 10000; k++);
+}
+#else
+#define slow_down()
+#endif
+
+void putch(const unsigned char c)
+{
+	unsigned char ch;
+	int i = 0;
+
+	do {
+		ch = com1[SER_CMD];
+		slow_down();
+		i++;
+		if (i > TIMEOUT) {
+			break;
+		}
+	} while (0 == (ch & TX_BUSY));
+	com1[SER_DATA] = c;
+}
+
+void puts(unsigned char *cp)
+{
+	unsigned char ch;
+	int i = 0;
+
+	while (*cp) {
+		do {
+			ch = com1[SER_CMD];
+			slow_down();
+			i++;
+			if (i > TIMEOUT) {
+				break;
+			}
+		} while (0 == (ch & TX_BUSY));
+		com1[SER_DATA] = *cp++;
+	}
+	putch('\r');
+	putch('\n');
+}
+
+void fputs(unsigned char *cp)
+{
+	unsigned char ch;
+	int i = 0;
+
+	while (*cp) {
+
+		do {
+			ch = com1[SER_CMD];
+			slow_down();
+			i++;
+			if (i > TIMEOUT) {
+				break;
+			}
+		} while (0 == (ch & TX_BUSY));
+		com1[SER_DATA] = *cp++;
+	}
+}
+
+
+void put64(uint64_t ul)
+{
+	int cnt;
+	unsigned ch;
+
+	cnt = 16;		/* 16 nibbles in a 64 bit long */
+	putch('0');
+	putch('x');
+	do {
+		cnt--;
+		ch = (unsigned char) (ul >> cnt * 4) & 0x0F;
+		putch(digits[ch]);
+	} while (cnt > 0);
+}
+
+void put32(unsigned u)
+{
+	int cnt;
+	unsigned ch;
+
+	cnt = 8;		/* 8 nibbles in a 32 bit long */
+	putch('0');
+	putch('x');
+	do {
+		cnt--;
+		ch = (unsigned char) (u >> cnt * 4) & 0x0F;
+		putch(digits[ch]);
+	} while (cnt > 0);
+}
diff --git a/arch/mips/ite-boards/generic/reset.c b/arch/mips/ite-boards/generic/reset.c
new file mode 100644
index 0000000..03bd5ba
--- /dev/null
+++ b/arch/mips/ite-boards/generic/reset.c
@@ -0,0 +1,60 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	ITE 8172 reset routines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void it8172_restart()
+{
+	set_c0_status(ST0_BEV | ST0_ERL);
+	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+	flush_cache_all();
+	write_c0_wired(0);
+	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
+}
+
+void it8172_halt(void)
+{
+	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+	while (1)
+		__asm__(".set\tmips3\n\t"
+	                "wait\n\t"
+			".set\tmips0");
+}
+
+void it8172_power_off(void)
+{
+	it8172_halt();
+}
diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c
new file mode 100644
index 0000000..30a6c0d
--- /dev/null
+++ b/arch/mips/ite-boards/generic/time.c
@@ -0,0 +1,247 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/spinlock.h>
+
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_int.h>
+#include <asm/debug.h>
+
+#define IT8172_RTC_ADR_REG  (IT8172_PCI_IO_BASE + IT_RTC_BASE)
+#define IT8172_RTC_DAT_REG  (IT8172_RTC_ADR_REG + 1)
+#define IT8172_RTC_CENTURY_REG  (IT8172_PCI_IO_BASE + IT_RTC_CENTURY)
+
+static volatile char *rtc_adr_reg = (char*)KSEG1ADDR(IT8172_RTC_ADR_REG);
+static volatile char *rtc_dat_reg = (char*)KSEG1ADDR(IT8172_RTC_DAT_REG);
+static volatile char *rtc_century_reg = (char*)KSEG1ADDR(IT8172_RTC_CENTURY_REG);
+
+unsigned char it8172_rtc_read_data(unsigned long addr)
+{
+	unsigned char retval;
+
+	*rtc_adr_reg = addr;
+	retval =  *rtc_dat_reg;
+	return retval;
+}
+
+void it8172_rtc_write_data(unsigned char data, unsigned long addr)
+{
+	*rtc_adr_reg = addr;
+	*rtc_dat_reg = data;
+}
+
+#undef 	CMOS_READ
+#undef 	CMOS_WRITE
+#define	CMOS_READ(addr)			it8172_rtc_read_data(addr)
+#define CMOS_WRITE(data, addr) 		it8172_rtc_write_data(data, addr)
+
+static unsigned char saved_control;	/* remember rtc control reg */
+static inline int rtc_24h(void) { return saved_control & RTC_24H; }
+static inline int rtc_dm_binary(void) { return saved_control & RTC_DM_BINARY; }
+
+static inline unsigned char
+bin_to_hw(unsigned char c)
+{
+	if (rtc_dm_binary()) 
+		return c;
+	else
+		return ((c/10) << 4) + (c%10);
+}
+
+static inline unsigned char
+hw_to_bin(unsigned char c)
+{
+	if (rtc_dm_binary())
+		return c;
+	else
+		return (c>>4)*10 + (c &0xf);
+}
+
+/* 0x80 bit indicates pm in 12-hour format */
+static inline unsigned char
+hour_bin_to_hw(unsigned char c)
+{
+	if (rtc_24h()) 
+		return bin_to_hw(c);
+	if (c >= 12) 
+		return 0x80 | bin_to_hw((c==12)?12:c-12);  /* 12 is 12pm */
+	else
+		return bin_to_hw((c==0)?12:c);	/* 0 is 12 AM, not 0 am */
+}
+
+static inline unsigned char
+hour_hw_to_bin(unsigned char c)
+{
+	unsigned char tmp = hw_to_bin(c&0x3f);
+	if (rtc_24h())
+		return tmp;
+	if (c & 0x80) 
+		return (tmp==12)?12:tmp+12;  	/* 12pm is 12, not 24 */
+	else 
+		return (tmp==12)?0:tmp;		/* 12am is 0 */
+}
+
+static unsigned long r4k_offset; /* Amount to increment compare reg each time */
+static unsigned long r4k_cur;    /* What counter should be at next timer irq */
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick.
+ * Use the RTC to calculate offset.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+	unsigned int flags;
+
+	local_irq_save(flags);
+
+	/* Start counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	/* Start r4k counter. */
+	write_c0_count(0);
+
+	/* Read counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	mips_hpt_frequency = read_c0_count();
+
+	/* restore interrupts */
+	local_irq_restore(flags);
+
+	return (mips_hpt_frequency / HZ);
+}
+
+static unsigned long 
+it8172_rtc_get_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	unsigned int flags;
+
+	/* avoid update-in-progress. */
+	for (;;) {
+		local_irq_save(flags);
+		if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
+			break;
+		/* don't hold intr closed all the time */
+		local_irq_restore(flags);
+	}
+
+	/* Read regs. */
+	sec = hw_to_bin(CMOS_READ(RTC_SECONDS));
+	min = hw_to_bin(CMOS_READ(RTC_MINUTES));
+	hour = hour_hw_to_bin(CMOS_READ(RTC_HOURS));
+	day = hw_to_bin(CMOS_READ(RTC_DAY_OF_MONTH));
+	mon = hw_to_bin(CMOS_READ(RTC_MONTH));
+	year = hw_to_bin(CMOS_READ(RTC_YEAR)) + 
+		hw_to_bin(*rtc_century_reg) * 100;
+
+	/* restore interrupts */
+	local_irq_restore(flags);
+		
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+static int
+it8172_rtc_set_time(unsigned long t)
+{
+	struct rtc_time tm;
+	unsigned int flags;
+
+	/* convert */
+	to_tm(t, &tm);
+
+	/* avoid update-in-progress. */
+	for (;;) {
+		local_irq_save(flags);
+		if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
+			break;
+		/* don't hold intr closed all the time */
+		local_irq_restore(flags);
+	}
+
+	*rtc_century_reg = bin_to_hw(tm.tm_year/100);
+	CMOS_WRITE(bin_to_hw(tm.tm_sec), RTC_SECONDS);
+	CMOS_WRITE(bin_to_hw(tm.tm_min), RTC_MINUTES);
+	CMOS_WRITE(hour_bin_to_hw(tm.tm_hour), RTC_HOURS);
+	CMOS_WRITE(bin_to_hw(tm.tm_mday), RTC_DAY_OF_MONTH);
+	CMOS_WRITE(bin_to_hw(tm.tm_mon+1), RTC_MONTH);	/* tm_mon starts from 0 */
+	CMOS_WRITE(bin_to_hw(tm.tm_year%100), RTC_YEAR);
+
+	/* restore interrupts */
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+void __init it8172_time_init(void)
+{
+        unsigned int est_freq, flags;
+
+	local_irq_save(flags);
+
+	saved_control = CMOS_READ(RTC_CONTROL);
+
+	printk("calculating r4koff... ");
+	r4k_offset = cal_r4koff();
+	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+	est_freq = 2*r4k_offset*HZ;
+	est_freq += 5000;    /* round */
+	est_freq -= est_freq%10000;
+	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+	       (est_freq%1000000)*100/1000000);
+
+	local_irq_restore(flags);
+
+	rtc_get_time = it8172_rtc_get_time;
+	rtc_set_time = it8172_rtc_set_time;
+}
+
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
+void __init it8172_timer_setup(struct irqaction *irq)
+{
+	puts("timer_setup\n");
+	put32(NR_IRQS);
+	puts("");
+        /* we are using the cpu counter for timer interrupts */
+	setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+
+        /* to generate the first timer interrupt */
+	r4k_cur = (read_c0_count() + r4k_offset);
+	write_c0_compare(r4k_cur);
+	set_c0_status(ALLINTS);
+}
diff --git a/arch/mips/ite-boards/ivr/Makefile b/arch/mips/ite-boards/ivr/Makefile
new file mode 100644
index 0000000..e4fa604
--- /dev/null
+++ b/arch/mips/ite-boards/ivr/Makefile
@@ -0,0 +1,10 @@
+#
+#  Copyright 2000 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Globespan IVR board,
+# board-specific files.
+#
+
+obj-y		+= init.o
diff --git a/arch/mips/ite-boards/ivr/README b/arch/mips/ite-boards/ivr/README
new file mode 100644
index 0000000..aa7d8db
--- /dev/null
+++ b/arch/mips/ite-boards/ivr/README
@@ -0,0 +1,3 @@
+This is not really a board made by ITE Semi, but it's very
+similar to the ITE QED-4N-S01B board.  The IVR board is made
+by Globespan and it's a reference board for the PVR chip.
diff --git a/arch/mips/ite-boards/ivr/init.c b/arch/mips/ite-boards/ivr/init.c
new file mode 100644
index 0000000..ea4e193
--- /dev/null
+++ b/arch/mips/ite-boards/ivr/init.c
@@ -0,0 +1,84 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	IVR board setup.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_dbg.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+
+extern char _end;
+extern void  __init prom_init_cmdline(void);
+extern unsigned long __init prom_get_memsize(void);
+extern void __init it8172_init_ram_resource(unsigned long memsize);
+
+#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_ALIGN(x)	(((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+const char *get_system_type(void)
+{
+	return "Globespan IVR";
+}
+
+void __init prom_init(void)
+{
+	unsigned long mem_size;
+	unsigned long pcicr;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (int *) fw_arg3;
+
+	mips_machgroup = MACH_GROUP_GLOBESPAN;
+	mips_machtype = MACH_IVR;  /* Globespan's iTVC15 reference board */
+
+	prom_init_cmdline();
+
+	/* pmon does not set memsize */
+	mem_size = prom_get_memsize();
+	mem_size = mem_size << 20;
+
+	/*
+	 * make the entire physical memory visible to pci bus masters
+	 */
+	IT_READ(IT_MC_PCICR, pcicr);
+	pcicr &= ~0x1f;
+	pcicr |= (mem_size - 1) >> 22;
+	IT_WRITE(IT_MC_PCICR, pcicr);
+
+	it8172_init_ram_resource(mem_size);
+	add_memory_region(0, mem_size, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/ite-boards/qed-4n-s01b/Makefile b/arch/mips/ite-boards/qed-4n-s01b/Makefile
new file mode 100644
index 0000000..bb9972a
--- /dev/null
+++ b/arch/mips/ite-boards/qed-4n-s01b/Makefile
@@ -0,0 +1,10 @@
+#
+#  Copyright 2000 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc.
+#     	ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the ITE 8172 (qed-4n-s01b) board, board
+# specific files.
+#
+
+obj-y := init.o
diff --git a/arch/mips/ite-boards/qed-4n-s01b/README b/arch/mips/ite-boards/qed-4n-s01b/README
new file mode 100644
index 0000000..fb4b519
--- /dev/null
+++ b/arch/mips/ite-boards/qed-4n-s01b/README
@@ -0,0 +1,2 @@
+This is an ITE (www.iteusa.com) eval board for the ITE 8172G
+system controller, with a QED 5231 CPU.
diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c
new file mode 100644
index 0000000..56dca7e
--- /dev/null
+++ b/arch/mips/ite-boards/qed-4n-s01b/init.c
@@ -0,0 +1,85 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	IT8172/QED5231 board setup.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_dbg.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+
+extern char _end;
+extern void  __init prom_init_cmdline(void);
+extern unsigned long __init prom_get_memsize(void);
+extern void __init it8172_init_ram_resource(unsigned long memsize);
+
+#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_ALIGN(x)	(((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+
+const char *get_system_type(void)
+{
+	return "ITE QED-4N-S01B";
+}
+
+void __init prom_init(void)
+{
+	unsigned long mem_size;
+	unsigned long pcicr;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (int *) fw_arg3;
+
+	mips_machgroup = MACH_GROUP_ITE;
+	mips_machtype = MACH_QED_4N_S01B;  /* ITE board name/number */
+
+	prom_init_cmdline();
+	mem_size = prom_get_memsize();
+
+	printk("Memory size: %dMB\n", (unsigned)mem_size);
+
+	mem_size <<= 20; /* MB */
+
+	/*
+	 * make the entire physical memory visible to pci bus masters
+	 */
+	IT_READ(IT_MC_PCICR, pcicr);
+	pcicr &= ~0x1f;
+	pcicr |= (mem_size - 1) >> 22;
+	IT_WRITE(IT_MC_PCICR, pcicr);
+
+	it8172_init_ram_resource(mem_size);
+	add_memory_region(0, mem_size, BOOT_MEM_RAM);
+}