Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S
new file mode 100644
index 0000000..4dbcf91
--- /dev/null
+++ b/arch/mips/jazz/int-handler.S
@@ -0,0 +1,282 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle and Andreas Busse
+ *
+ * Jazz family specific interrupt stuff
+ *
+ * To do: On Jazz machines we remap some non-ISA interrupts to ISA
+ *        interrupts.  These interrupts should use their own vectors.
+ *        Squeeze the last cycles out of the handlers.  Only a dead
+ *        cycle is a good cycle.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/jazz.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * jazz_handle_int: Interrupt handler for the ACER Pica-61 boards
+ */
+		.set	noreorder
+
+		NESTED(jazz_handle_int, PT_SIZE, ra)
+		.set	noat
+		SAVE_ALL
+		CLI
+		.set	at
+
+		/*
+		 * Get pending interrupts
+		 */
+		mfc0	t0,CP0_CAUSE		# get pending interrupts
+		mfc0	t1,CP0_STATUS		# get enabled interrupts
+		and	t0,t1			# isolate allowed ones
+		andi	t0,0xff00		# isolate pending bits
+		beqz	t0,3f
+		sll	t0,16			# delay slot
+
+		/*
+		 * Find irq with highest priority
+		 * FIXME: This is slow - use binary search
+		 */
+		la	t1,ll_vectors
+1:		bltz	t0,2f			# found pending irq
+		sll	t0,1
+		b	1b
+		subu	t1,PTRSIZE		# delay slot
+
+		/*
+		 * Do the low-level stuff
+		 */
+2:		lw	t0,(t1)
+		jr	t0
+		nop				# delay slot
+		END(jazz_handle_int)
+
+ll_sw0:		li	s1,~IE_SW0
+		mfc0	t0,CP0_CAUSE
+		and	t0,s1
+		mtc0	t0,CP0_CAUSE
+		PANIC("Unimplemented sw0 handler")
+
+ll_sw1:		li	s1,~IE_SW1
+		mfc0	t0,CP0_CAUSE
+		and	t0,s1
+		mtc0	t0,CP0_CAUSE
+		PANIC("Unimplemented sw1 handler")
+
+ll_local_dma:	li	s1,~IE_IRQ0
+		PANIC("Unimplemented local_dma handler")
+
+ll_local_dev:	lbu	t0,JAZZ_IO_IRQ_SOURCE
+#if PTRSIZE == 8	/* True 64 bit kernel */
+		dsll	t0,1
+#endif
+		.set	reorder
+		LONG_L	t0,local_vector(t0)
+		jr	t0
+		.set	noreorder
+
+/*
+ * The braindead PICA hardware gives us no way to distinguish if we really
+ * received interrupt 7 from the (E)ISA bus or if we just received an
+ * interrupt with no findable cause.  This sometimes happens with braindead
+ * cards.  Oh well - for all the Jazz boxes slots are more or less just
+ * whistles and bells and we're aware of the problem.
+ */
+ll_isa_irq:	lw	a0, JAZZ_EISA_IRQ_ACK
+
+		jal	do_IRQ
+		 move	a1,sp
+
+		j	ret_from_irq
+		nop
+
+/*
+ * Hmm...  This is not just a plain PC clone so the question is
+ * which devices on Jazz machines can generate an (E)ISA NMI?
+ * (Writing to nonexistent memory?)
+ */
+ll_isa_nmi:	li	s1,~IE_IRQ3
+		PANIC("Unimplemented isa_nmi handler")
+
+/*
+ * Timer IRQ - remapped to be more similar to an IBM compatible.
+ *
+ * The timer interrupt is handled specially to ensure that the jiffies
+ * variable is updated at all times.  Specifically, the timer interrupt is
+ * just like the complete handlers except that it is invoked with interrupts
+ * disabled and should never re-enable them.  If other interrupts were
+ * allowed to be processed while the timer interrupt is active, then the
+ * other interrupts would have to avoid using the jiffies variable for delay
+ * and interval timing operations to avoid hanging the system.
+ */
+ll_timer:	lw	zero,JAZZ_TIMER_REGISTER # timer irq cleared on read
+		li	s1,~IE_IRQ4
+
+		li	a0, JAZZ_TIMER_IRQ
+		jal	do_IRQ
+		 move	a1,sp
+
+		mfc0	t0,CP0_STATUS		# disable interrupts again
+		ori	t0,1
+		xori	t0,1
+		mtc0	t0,CP0_STATUS
+
+		j	ret_from_irq
+		 nop
+
+/*
+ * CPU count/compare IRQ (unused)
+ */
+ll_count:	j	ret_from_irq
+		 mtc0	zero,CP0_COMPARE
+
+#if 0
+/*
+ * Call the handler for the interrupt
+ * (Currently unused)
+ */
+call_real:	/*
+		 * temporarily disable interrupt
+		 */
+		mfc0	t2,CP0_STATUS
+		and	t2,s1
+		mtc0	t2,CP0_STATUS
+		nor	s1,zero,s1
+		jal	do_IRQ
+
+		/*
+		 * reenable interrupt
+		 */
+		mfc0	t2,CP0_STATUS
+		or	t2,s1
+		mtc0	t2,CP0_STATUS
+		j	ret_from_irq
+#endif
+
+		.data
+		PTR	ll_sw0			# SW0
+		PTR	ll_sw1			# SW1
+		PTR	ll_local_dma		# Local DMA
+		PTR	ll_local_dev		# Local devices
+		PTR	ll_isa_irq		# ISA IRQ
+		PTR	ll_isa_nmi		# ISA NMI
+		PTR	ll_timer		# Timer
+ll_vectors:	PTR	ll_count		# Count/Compare IRQ
+
+		/*
+		 * Interrupt handlers for local devices.
+		 */
+		.text
+		.set	reorder
+loc_no_irq:	PANIC("Unimplemented loc_no_irq handler")
+/*
+ * Parallel port IRQ
+ */
+loc_parallel:	li	s1,~JAZZ_IE_PARALLEL
+		li	a0,JAZZ_PARALLEL_IRQ
+		b	loc_call
+
+/*
+ * Floppy IRQ
+ */
+loc_floppy:	li	s1,~JAZZ_IE_FLOPPY
+		li	a0,JAZZ_FLOPPY_IRQ
+		b	loc_call
+
+/*
+ * Sound IRQ
+ */
+loc_sound:	PANIC("Unimplemented loc_sound handler")
+loc_video:	PANIC("Unimplemented loc_video handler")
+
+/*
+ * Ethernet interrupt handler
+ */
+loc_ethernet: 	li	s1,~JAZZ_IE_ETHERNET
+		li	a0,JAZZ_ETHERNET_IRQ
+		b	loc_call
+
+/*
+ * SCSI interrupt handler
+ */
+loc_scsi:	li	s1,~JAZZ_IE_SCSI
+		li	a0,JAZZ_SCSI_IRQ
+		b	loc_call
+
+/*
+ * Keyboard interrupt handler
+ */
+loc_keyboard:	li	s1,~JAZZ_IE_KEYBOARD
+		li	a0,JAZZ_KEYBOARD_IRQ
+		b	loc_call
+
+/*
+ * Mouse interrupt handler
+ */
+loc_mouse:	li	s1,~JAZZ_IE_MOUSE
+		li	a0,JAZZ_MOUSE_IRQ
+		b	loc_call
+
+/*
+ * Serial port 1 IRQ
+ */
+loc_serial1:	li	s1,~JAZZ_IE_SERIAL1
+		li	a0,JAZZ_SERIAL1_IRQ
+		b	loc_call
+
+/*
+ * Serial port 2 IRQ
+ */
+loc_serial2:	li	s1,~JAZZ_IE_SERIAL2
+		li	a0,JAZZ_SERIAL2_IRQ
+		b	loc_call
+
+/*
+ * Call the interrupt handler for an interrupt generated by a
+ * local device.
+ */
+loc_call:	/*
+		 * Temporarily disable interrupt source
+		 */
+		lhu	t2,JAZZ_IO_IRQ_ENABLE
+		and	t2,s1
+		sh	t2,JAZZ_IO_IRQ_ENABLE
+
+ 		nor	s1,zero,s1
+		jal	do_IRQ
+
+ 		/*
+ 		 * Reenable interrupt
+ 		 */
+		lhu	t2,JAZZ_IO_IRQ_ENABLE
+ 		or	t2,s1
+		sh	t2,JAZZ_IO_IRQ_ENABLE
+
+ 		j	ret_from_irq
+
+/*
+ * "Jump extender" to reach spurious_interrupt
+ */
+3:		j	spurious_interrupt
+
+/*
+ * Vectors for interrupts generated by local devices
+ */
+		.data
+local_vector:	PTR	loc_no_irq
+		PTR	loc_parallel
+		PTR	loc_floppy
+		PTR	loc_sound
+		PTR	loc_video
+		PTR	loc_ethernet
+		PTR	loc_scsi
+		PTR	loc_keyboard
+		PTR	loc_mouse
+		PTR	loc_serial1
+		PTR	loc_serial2