Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc/4xx_io/Makefile b/arch/ppc/4xx_io/Makefile
new file mode 100644
index 0000000..6a8cd57
--- /dev/null
+++ b/arch/ppc/4xx_io/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux MPC4xx ppc-specific parts
+#
+
+
+obj-$(CONFIG_SERIAL_SICC) += serial_sicc.o
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
new file mode 100644
index 0000000..e95c48d
--- /dev/null
+++ b/arch/ppc/4xx_io/serial_sicc.c
@@ -0,0 +1,2012 @@
+/*
+ * arch/ppc/4xx_io/serial_sicc.c
+ *
+ * Driver for IBM STB3xxx SICC serial port
+ *
+ * Based on drivers/char/serial_amba.c, by ARM Ltd.
+ *
+ * Copyright 2001 IBM Crop.
+ * Author: IBM China Research Lab
+ * Yudong Yang <yangyud@cn.ibm.com>
+ * Yi Ge <geyi@cn.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * This is a driver for SICC serial port on IBM Redwood 4 evaluation board.
+ * The driver support both as a console device and normal serial device and
+ * is compatible with normal ttyS* devices.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/serial.h>
+
+
+#include <linux/serialP.h>
+
+
+/* -----------------------------------------------------------------------------
+ * From STB03xxx SICC UART Specification
+ * -----------------------------------------------------------------------------
+ * UART Register Offsets.
+ */
+
+#define BL_SICC_LSR 0x0000000 /* line status register read/clear */
+#define BL_SICC_LSRS 0x0000001 /* set line status register read/set */
+#define BL_SICC_HSR 0x0000002 /* handshake status register r/clear */
+#define BL_SICC_HSRS 0x0000003 /* set handshake status register r/set */
+#define BL_SICC_BRDH 0x0000004 /* baudrate divisor high reg r/w */
+#define BL_SICC_BRDL 0x0000005 /* baudrate divisor low reg r/w */
+#define BL_SICC_LCR 0x0000006 /* control register r/w */
+#define BL_SICC_RCR 0x0000007 /* receiver command register r/w */
+#define BL_SICC_TxCR 0x0000008 /* transmitter command register r/w */
+#define BL_SICC_RBR 0x0000009 /* receive buffer r */
+#define BL_SICC_TBR 0x0000009 /* transmit buffer w */
+#define BL_SICC_CTL2 0x000000A /* added for Vesta */
+#define BL_SICC_IrCR 0x000000B /* added for Vesta IR */
+
+/* masks and definitions for serial port control register */
+
+#define _LCR_LM_MASK 0xc0 /* loop back modes */
+#define _LCR_DTR_MASK 0x20 /* data terminal ready 0-inactive */
+#define _LCR_RTS_MASK 0x10 /* request to send 0-inactive */
+#define _LCR_DB_MASK 0x08 /* data bits mask */
+#define _LCR_PE_MASK 0x04 /* parity enable */
+#define _LCR_PTY_MASK 0x02 /* parity */
+#define _LCR_SB_MASK 0x01 /* stop bit mask */
+
+#define _LCR_LM_NORM 0x00 /* normal operation */
+#define _LCR_LM_LOOP 0x40 /* internal loopback mode */
+#define _LCR_LM_ECHO 0x80 /* automatic echo mode */
+#define _LCR_LM_RES 0xc0 /* reserved */
+
+#define _LCR_DTR_ACTIVE _LCR_DTR_MASK /* DTR is active */
+#define _LCR_RTS_ACTIVE _LCR_RTS_MASK /* RTS is active */
+#define _LCR_DB_8_BITS _LCR_DB_MASK /* 8 data bits */
+#define _LCR_DB_7_BITS 0x00 /* 7 data bits */
+#define _LCR_PE_ENABLE _LCR_PE_MASK /* parity enabled */
+#define _LCR_PE_DISABLE 0x00 /* parity disabled */
+#define _LCR_PTY_EVEN 0x00 /* even parity */
+#define _LCR_PTY_ODD _LCR_PTY_MASK /* odd parity */
+#define _LCR_SB_1_BIT 0x00 /* one stop bit */
+#define _LCR_SB_2_BIT _LCR_SB_MASK /* two stop bit */
+
+/* serial port handshake register */
+
+#define _HSR_DIS_MASK 0x80 /* DSR input inactive error mask */
+#define _HSR_CS_MASK 0x40 /* CTS input inactive error mask */
+#define _HSR_DIS_ACT 0x00 /* dsr input is active */
+#define _HSR_DIS_INACT _HSR_DIS_MASK /* dsr input is inactive */
+#define _HSR_CS_ACT 0x00 /* cts input is active */
+#define _HSR_CS_INACT _HSR_CS_MASK /* cts input is active */
+
+/* serial port line status register */
+
+#define _LSR_RBR_MASK 0x80 /* receive buffer ready mask */
+#define _LSR_FE_MASK 0x40 /* framing error */
+#define _LSR_OE_MASK 0x20 /* overrun error */
+#define _LSR_PE_MASK 0x10 /* parity error */
+#define _LSR_LB_MASK 0x08 /* line break */
+#define _LSR_TBR_MASK 0x04 /* transmit buffer ready */
+#define _LSR_TSR_MASK 0x02 /* transmit shift register ready */
+
+#define _LSR_RBR_FULL _LSR_RBR_MASK /* receive buffer is full */
+#define _LSR_FE_ERROR _LSR_FE_MASK /* framing error detected */
+#define _LSR_OE_ERROR _LSR_OE_MASK /* overrun error detected */
+#define _LSR_PE_ERROR _LSR_PE_MASK /* parity error detected */
+#define _LSR_LB_BREAK _LSR_LB_MASK /* line break detected */
+#define _LSR_TBR_EMPTY _LSR_TBR_MASK /* transmit buffer is ready */
+#define _LSR_TSR_EMPTY _LSR_TSR_MASK /* transmit shift register is empty */
+#define _LSR_TX_ALL 0x06 /* all physical transmit is done */
+
+#define _LSR_RX_ERR (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \
+ _LSR_PE_MASK )
+
+/* serial port receiver command register */
+
+#define _RCR_ER_MASK 0x80 /* enable receiver mask */
+#define _RCR_DME_MASK 0x60 /* dma mode */
+#define _RCR_EIE_MASK 0x10 /* error interrupt enable mask */
+#define _RCR_PME_MASK 0x08 /* pause mode mask */
+
+#define _RCR_ER_ENABLE _RCR_ER_MASK /* receiver enabled */
+#define _RCR_DME_DISABLE 0x00 /* dma disabled */
+#define _RCR_DME_RXRDY 0x20 /* dma disabled, RxRDY interrupt enabled*/
+#define _RCR_DME_ENABLE2 0x40 /* dma enabled,receiver src channel 2 */
+#define _RCR_DME_ENABLE3 0x60 /* dma enabled,receiver src channel 3 */
+#define _RCR_PME_HARD _RCR_PME_MASK /* RTS controlled by hardware */
+#define _RCR_PME_SOFT 0x00 /* RTS controlled by software */
+
+/* serial port transmit command register */
+
+#define _TxCR_ET_MASK 0x80 /* transmiter enable mask */
+#define _TxCR_DME_MASK 0x60 /* dma mode mask */
+#define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */
+#define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */
+#define _TxCR_SPE_MASK 0x04 /* stop/pause mask */
+#define _TxCR_TB_MASK 0x02 /* transmit break mask */
+
+#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmiter enabled */
+#define _TxCR_DME_DISABLE 0x00 /* transmiter disabled, TBR intr disabled */
+#define _TxCR_DME_TBR 0x20 /* transmiter disabled, TBR intr enabled */
+#define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */
+#define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */
+
+/* serial ctl reg 2 - added for Vesta */
+
+#define _CTL2_EXTERN 0x80 /* */
+#define _CTL2_USEFIFO 0x40 /* */
+#define _CTL2_RESETRF 0x08 /* */
+#define _CTL2_RESETTF 0x04 /* */
+
+
+
+#define SERIAL_SICC_NAME "ttySICC"
+#define SERIAL_SICC_MAJOR 150
+#define SERIAL_SICC_MINOR 1
+#define SERIAL_SICC_NR 1
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/*
+ * Things needed by tty driver
+ */
+static struct tty_driver *siccnormal_driver;
+
+#if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+/*
+ * Things needed internally to this driver
+ */
+
+/*
+ * tmp_buf is used as a temporary buffer by serial_write. We need to
+ * lock it in case the copy_from_user blocks while swapping in a page,
+ * and some other program tries to do a serial write at the same time.
+ * Since the lock will only come under contention when the system is
+ * swapping and available memory is low, it makes sense to share one
+ * buffer across all the serial ports, since it significantly saves
+ * memory if large numbers of serial ports are open.
+ */
+static u_char *tmp_buf;
+static DECLARE_MUTEX(tmp_buf_sem);
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+#define SICC_ISR_PASS_LIMIT 256
+
+#define EVT_WRITE_WAKEUP 0
+
+struct SICC_icount {
+ __u32 cts;
+ __u32 dsr;
+ __u32 rng;
+ __u32 dcd;
+ __u32 rx;
+ __u32 tx;
+ __u32 frame;
+ __u32 overrun;
+ __u32 parity;
+ __u32 brk;
+ __u32 buf_overrun;
+};
+
+/*
+ * Static information about the port
+ */
+struct SICC_port {
+ unsigned int uart_base;
+ unsigned int uart_base_phys;
+ unsigned int irqrx;
+ unsigned int irqtx;
+ unsigned int uartclk;
+ unsigned int fifosize;
+ unsigned int tiocm_support;
+ void (*set_mctrl)(struct SICC_port *, u_int mctrl);
+};
+
+/*
+ * This is the state information which is persistent across opens
+ */
+struct SICC_state {
+ struct SICC_icount icount;
+ unsigned int line;
+ unsigned int close_delay;
+ unsigned int closing_wait;
+ unsigned int custom_divisor;
+ unsigned int flags;
+ int count;
+ struct SICC_info *info;
+ spinlock_t sicc_lock;
+};
+
+#define SICC_XMIT_SIZE 1024
+/*
+ * This is the state information which is only valid when the port is open.
+ */
+struct SICC_info {
+ struct SICC_port *port;
+ struct SICC_state *state;
+ struct tty_struct *tty;
+ unsigned char x_char;
+ unsigned char old_status;
+ unsigned char read_status_mask;
+ unsigned char ignore_status_mask;
+ struct circ_buf xmit;
+ unsigned int flags;
+#ifdef SUPPORT_SYSRQ
+ unsigned long sysrq;
+#endif
+
+ unsigned int event;
+ unsigned int timeout;
+ unsigned int lcr_h;
+ unsigned int mctrl;
+ int blocked_open;
+
+ struct tasklet_struct tlet;
+
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+ wait_queue_head_t delta_msr_wait;
+};
+
+#ifdef CONFIG_SERIAL_SICC_CONSOLE
+static struct console siccuart_cons;
+#endif
+static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios);
+static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout);
+
+
+
+static void powerpcMtcic_cr(unsigned long value)
+{
+ mtdcr(DCRN_CICCR, value);
+}
+
+static unsigned long powerpcMfcic_cr(void)
+{
+ return mfdcr(DCRN_CICCR);
+}
+
+static unsigned long powerpcMfclkgpcr(void)
+{
+ return mfdcr(DCRN_SCCR);
+}
+
+static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl)
+{
+}
+
+static struct SICC_port sicc_ports[SERIAL_SICC_NR] = {
+ {
+ .uart_base = 0,
+ .uart_base_phys = SICC0_IO_BASE,
+ .irqrx = SICC0_INTRX,
+ .irqtx = SICC0_INTTX,
+// .uartclk = 0,
+ .fifosize = 1,
+ .set_mctrl = sicc_set_mctrl_null,
+ }
+};
+
+static struct SICC_state sicc_state[SERIAL_SICC_NR];
+
+static void siccuart_enable_rx_interrupt(struct SICC_info *info)
+{
+ unsigned char cr;
+
+ cr = readb(info->port->uart_base+BL_SICC_RCR);
+ cr &= ~_RCR_DME_MASK;
+ cr |= _RCR_DME_RXRDY;
+ writeb(cr, info->port->uart_base+BL_SICC_RCR);
+}
+
+static void siccuart_disable_rx_interrupt(struct SICC_info *info)
+{
+ unsigned char cr;
+
+ cr = readb(info->port->uart_base+BL_SICC_RCR);
+ cr &= ~_RCR_DME_MASK;
+ cr |= _RCR_DME_DISABLE;
+ writeb(cr, info->port->uart_base+BL_SICC_RCR);
+}
+
+
+static void siccuart_enable_tx_interrupt(struct SICC_info *info)
+{
+ unsigned char cr;
+
+ cr = readb(info->port->uart_base+BL_SICC_TxCR);
+ cr &= ~_TxCR_DME_MASK;
+ cr |= _TxCR_DME_TBR;
+ writeb(cr, info->port->uart_base+BL_SICC_TxCR);
+}
+
+static void siccuart_disable_tx_interrupt(struct SICC_info *info)
+{
+ unsigned char cr;
+
+ cr = readb(info->port->uart_base+BL_SICC_TxCR);
+ cr &= ~_TxCR_DME_MASK;
+ cr |= _TxCR_DME_DISABLE;
+ writeb(cr, info->port->uart_base+BL_SICC_TxCR);
+}
+
+
+static void siccuart_stop(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+
+ /* disable interrupts while stopping serial port interrupts */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ siccuart_disable_tx_interrupt(info);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+}
+
+static void siccuart_start(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+
+ /* disable interrupts while starting serial port interrupts */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ if (info->xmit.head != info->xmit.tail
+ && info->xmit.buf)
+ siccuart_enable_tx_interrupt(info);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+}
+
+
+/*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver.
+ */
+static void siccuart_event(struct SICC_info *info, int event)
+{
+ info->event |= 1 << event;
+ tasklet_schedule(&info->tlet);
+}
+
+static void
+siccuart_rx_chars(struct SICC_info *info, struct pt_regs *regs)
+{
+ struct tty_struct *tty = info->tty;
+ unsigned int status, ch, rsr, flg, ignored = 0;
+ struct SICC_icount *icount = &info->state->icount;
+ struct SICC_port *port = info->port;
+
+ status = readb(port->uart_base+BL_SICC_LSR );
+ while (status & _LSR_RBR_FULL) {
+ ch = readb(port->uart_base+BL_SICC_RBR);
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto ignore_char;
+ icount->rx++;
+
+ flg = TTY_NORMAL;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ rsr = readb(port->uart_base+BL_SICC_LSR);
+ if (rsr & _LSR_RX_ERR)
+ goto handle_error;
+#ifdef SUPPORT_SYSRQ
+ if (info->sysrq) {
+ if (ch && time_before(jiffies, info->sysrq)) {
+ handle_sysrq(ch, regs, NULL);
+ info->sysrq = 0;
+ goto ignore_char;
+ }
+ info->sysrq = 0;
+ }
+#endif
+ error_return:
+ *tty->flip.flag_buf_ptr++ = flg;
+ *tty->flip.char_buf_ptr++ = ch;
+ tty->flip.count++;
+ ignore_char:
+ status = readb(port->uart_base+BL_SICC_LSR );
+ }
+out:
+ tty_flip_buffer_push(tty);
+ return;
+
+handle_error:
+ if (rsr & _LSR_LB_BREAK) {
+ rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK);
+ icount->brk++;
+
+#ifdef SUPPORT_SYSRQ
+ if (info->state->line == siccuart_cons.index) {
+ if (!info->sysrq) {
+ info->sysrq = jiffies + HZ*5;
+ goto ignore_char;
+ }
+ }
+#endif
+ } else if (rsr & _LSR_PE_MASK)
+ icount->parity++;
+ else if (rsr & _LSR_FE_MASK)
+ icount->frame++;
+ if (rsr & _LSR_OE_MASK)
+ icount->overrun++;
+
+ if (rsr & info->ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+ rsr &= info->read_status_mask;
+
+ if (rsr & _LSR_LB_BREAK)
+ flg = TTY_BREAK;
+ else if (rsr & _LSR_PE_MASK)
+ flg = TTY_PARITY;
+ else if (rsr & _LSR_FE_MASK)
+ flg = TTY_FRAME;
+
+ if (rsr & _LSR_OE_MASK) {
+ /*
+ * CHECK: does overrun affect the current character?
+ * ASSUMPTION: it does not.
+ */
+ *tty->flip.flag_buf_ptr++ = flg;
+ *tty->flip.char_buf_ptr++ = ch;
+ tty->flip.count++;
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto ignore_char;
+ ch = 0;
+ flg = TTY_OVERRUN;
+ }
+#ifdef SUPPORT_SYSRQ
+ info->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+static void siccuart_tx_chars(struct SICC_info *info)
+{
+ struct SICC_port *port = info->port;
+ int count;
+ unsigned char status;
+
+
+ if (info->x_char) {
+ writeb(info->x_char, port->uart_base+ BL_SICC_TBR);
+ info->state->icount.tx++;
+ info->x_char = 0;
+ return;
+ }
+ if (info->xmit.head == info->xmit.tail
+ || info->tty->stopped
+ || info->tty->hw_stopped) {
+ siccuart_disable_tx_interrupt(info);
+ writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR);
+ return;
+ }
+
+ count = port->fifosize;
+ do {
+ writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR);
+ info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1);
+ info->state->icount.tx++;
+ if (info->xmit.head == info->xmit.tail)
+ break;
+ } while (--count > 0);
+
+ if (CIRC_CNT(info->xmit.head,
+ info->xmit.tail,
+ SICC_XMIT_SIZE) < WAKEUP_CHARS)
+ siccuart_event(info, EVT_WRITE_WAKEUP);
+
+ if (info->xmit.head == info->xmit.tail) {
+ siccuart_disable_tx_interrupt(info);
+ }
+}
+
+
+static irqreturn_t siccuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct SICC_info *info = dev_id;
+ siccuart_rx_chars(info, regs);
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t siccuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct SICC_info *info = dev_id;
+ siccuart_tx_chars(info);
+ return IRQ_HANDLED;
+}
+
+static void siccuart_tasklet_action(unsigned long data)
+{
+ struct SICC_info *info = (struct SICC_info *)data;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event))
+ return;
+
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+ wake_up_interruptible(&tty->write_wait);
+}
+
+static int siccuart_startup(struct SICC_info *info)
+{
+ unsigned long flags;
+ unsigned long page;
+ int retval = 0;
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ return 0;
+ }
+
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ if (info->port->uart_base == 0)
+ info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE);
+ if (info->port->uart_base == 0) {
+ free_page(page);
+ return -ENOMEM;
+ }
+
+ /* lock access to info while doing setup */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+
+ if (info->xmit.buf)
+ free_page(page);
+ else
+ info->xmit.buf = (unsigned char *) page;
+
+
+ info->mctrl = 0;
+ if (info->tty->termios->c_cflag & CBAUD)
+ info->mctrl = TIOCM_RTS | TIOCM_DTR;
+ info->port->set_mctrl(info->port, info->mctrl);
+
+ /*
+ * initialise the old status of the modem signals
+ */
+ info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY;
+
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ info->xmit.head = info->xmit.tail = 0;
+
+ /*
+ * Set up the tty->alt_speed kludge
+ */
+ if (info->tty) {
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
+ }
+
+
+ writeb( 0x00, info->port->uart_base + BL_SICC_IrCR ); // disable IrDA
+
+
+ /*
+ * and set the speed of the serial port
+ */
+ siccuart_change_speed(info, 0);
+
+ // enable rx/tx ports
+ writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR);
+ writeb(_TxCR_ET_ENABLE , info->port->uart_base + BL_SICC_TxCR);
+
+ readb(info->port->uart_base + BL_SICC_RBR); // clear rx port
+
+ writeb(0xf8, info->port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */
+
+ /*
+ * Finally, enable interrupts
+ */
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info);
+ if (retval) {
+ if (capable(CAP_SYS_ADMIN)) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ retval = 0;
+ }
+ goto errout;
+ }
+ retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info);
+ if (retval) {
+ if (capable(CAP_SYS_ADMIN)) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ retval = 0;
+ }
+ free_irq(info->port->irqrx, info);
+ goto errout;
+ }
+
+ siccuart_enable_rx_interrupt(info);
+
+ info->flags |= ASYNC_INITIALIZED;
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ return 0;
+
+
+errout:
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ return retval;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void siccuart_shutdown(struct SICC_info *info)
+{
+ unsigned long flags;
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ return;
+
+ /* lock while shutting down port */
+ spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */
+
+ /*
+ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
+ * here so the queue might never be woken up
+ */
+ wake_up_interruptible(&info->delta_msr_wait);
+
+ /*
+ * disable all interrupts, disable the port
+ */
+ siccuart_disable_rx_interrupt(info);
+ siccuart_disable_tx_interrupt(info);
+
+ /*
+ * Free the IRQ
+ */
+ free_irq(info->port->irqtx, info);
+ free_irq(info->port->irqrx, info);
+
+ if (info->xmit.buf) {
+ unsigned long pg = (unsigned long) info->xmit.buf;
+ info->xmit.buf = NULL;
+ free_page(pg);
+ }
+
+
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS);
+ info->port->set_mctrl(info->port, info->mctrl);
+
+ /* kill off our tasklet */
+ tasklet_kill(&info->tlet);
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+}
+
+
+static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios)
+{
+ unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits;
+ unsigned long flags;
+
+ if (!info->tty || !info->tty->termios)
+ return;
+
+ cflag = info->tty->termios->c_cflag;
+
+ pr_debug("siccuart_set_cflag(0x%x) called\n", cflag);
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS7: lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9; break;
+ default: lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8
+ }
+ if (cflag & CSTOPB) {
+ lcr_h |= _LCR_SB_2_BIT;
+ bits ++;
+ }
+ if (cflag & PARENB) {
+ lcr_h |= _LCR_PE_ENABLE;
+ bits++;
+ if (!(cflag & PARODD))
+ lcr_h |= _LCR_PTY_ODD;
+ else
+ lcr_h |= _LCR_PTY_EVEN;
+ }
+
+ do {
+ /* Determine divisor based on baud rate */
+ baud = tty_get_baud_rate(info->tty);
+ if (!baud)
+ baud = 9600;
+
+
+ {
+ // here is ppc403SetBaud(com_port, baud);
+ unsigned long divisor, clockSource, temp;
+
+ /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
+ powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
+
+ /* Determine Internal Baud Clock Frequency */
+ /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
+ /* SCCR (Serial Clock Control Register) on Vesta */
+ temp = powerpcMfclkgpcr();
+
+ if(temp & 0x00000080) {
+ clockSource = 324000000;
+ }
+ else {
+ clockSource = 216000000;
+ }
+ clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
+ divisor = clockSource/(16*baud) - 1;
+ /* divisor has only 12 bits of resolution */
+ if(divisor>0x00000FFF){
+ divisor=0x00000FFF;
+ }
+
+ quot = divisor;
+ }
+
+ if (baud == 38400 &&
+ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ quot = info->state->custom_divisor;
+
+ if (!quot && old_termios) {
+ info->tty->termios->c_cflag &= ~CBAUD;
+ info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
+ old_termios = NULL;
+ }
+ } while (quot == 0 && old_termios);
+
+ /* As a last resort, if the quotient is zero, default to 9600 bps */
+ if (!quot)
+ quot = (info->port->uartclk / (16 * 9600)) - 1;
+
+ info->timeout = info->port->fifosize * HZ * bits / baud;
+ info->timeout += HZ/50; /* Add .02 seconds of slop */
+
+ if (cflag & CRTSCTS)
+ info->flags |= ASYNC_CTS_FLOW;
+ else
+ info->flags &= ~ASYNC_CTS_FLOW;
+ if (cflag & CLOCAL)
+ info->flags &= ~ASYNC_CHECK_CD;
+ else
+ info->flags |= ASYNC_CHECK_CD;
+
+ /*
+ * Set up parity check flag
+ */
+#define RELEVENT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ info->read_status_mask = _LSR_OE_MASK;
+ if (I_INPCK(info->tty))
+ info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
+ if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ info->read_status_mask |= _LSR_LB_MASK;
+
+ /*
+ * Characters to ignore
+ */
+ info->ignore_status_mask = 0;
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
+ if (I_IGNBRK(info->tty)) {
+ info->ignore_status_mask |= _LSR_LB_MASK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask |= _LSR_OE_MASK;
+ }
+
+ /* disable interrupts while reading and clearing registers */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+
+ old_rcr = readb(info->port->uart_base + BL_SICC_RCR);
+ old_tcr = readb(info->port->uart_base + BL_SICC_TxCR);
+
+
+ writeb(0, info->port->uart_base + BL_SICC_RCR);
+ writeb(0, info->port->uart_base + BL_SICC_TxCR);
+
+ /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/
+
+
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+
+
+ /* Set baud rate */
+ writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH );
+ writeb( quot & 0x00000FF, info->port->uart_base + BL_SICC_BRDL );
+
+ /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
+ /* For now, do NOT use FIFOs since 403 UART did not have this */
+ /* capability and this driver was inherited from 403UART. */
+ writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2);
+
+ writeb(lcr_h, info->port->uart_base + BL_SICC_LCR);
+
+ writeb(old_rcr, info->port->uart_base + BL_SICC_RCR); // restore rcr
+ writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr
+
+}
+
+
+static void siccuart_put_char(struct tty_struct *tty, u_char ch)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (!tty || !info->xmit.buf)
+ return;
+
+ /* lock info->xmit while adding character to tx buffer */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) {
+ info->xmit.buf[info->xmit.head] = ch;
+ info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1);
+ }
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+}
+
+static void siccuart_flush_chars(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (info->xmit.head == info->xmit.tail
+ || tty->stopped
+ || tty->hw_stopped
+ || !info->xmit.buf)
+ return;
+
+ /* disable interrupts while transmitting characters */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ siccuart_enable_tx_interrupt(info);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+}
+
+static int siccuart_write(struct tty_struct *tty,
+ const u_char * buf, int count)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+ int c, ret = 0;
+
+ if (!tty || !info->xmit.buf || !tmp_buf)
+ return 0;
+
+ /* lock info->xmit while removing characters from buffer */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ while (1) {
+ c = CIRC_SPACE_TO_END(info->xmit.head,
+ info->xmit.tail,
+ SICC_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
+ info->xmit.head = (info->xmit.head + c) &
+ (SICC_XMIT_SIZE - 1);
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ if (info->xmit.head != info->xmit.tail
+ && !tty->stopped
+ && !tty->hw_stopped)
+ siccuart_enable_tx_interrupt(info);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ return ret;
+}
+
+static int siccuart_write_room(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+
+ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
+}
+
+static int siccuart_chars_in_buffer(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+
+ return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
+}
+
+static void siccuart_flush_buffer(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+
+ pr_debug("siccuart_flush_buffer(%d) called\n", tty->index);
+ /* lock info->xmit while zeroing buffer counts */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ info->xmit.head = info->xmit.tail = 0;
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ wake_up_interruptible(&tty->write_wait);
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void siccuart_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct SICC_info *info = tty->driver_data;
+
+ info->x_char = ch;
+ if (ch)
+ siccuart_enable_tx_interrupt(info);
+}
+
+static void siccuart_throttle(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+
+ if (I_IXOFF(tty))
+ siccuart_send_xchar(tty, STOP_CHAR(tty));
+
+ if (tty->termios->c_cflag & CRTSCTS) {
+ /* disable interrupts while setting modem control lines */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ info->mctrl &= ~TIOCM_RTS;
+ info->port->set_mctrl(info->port, info->mctrl);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ }
+}
+
+static void siccuart_unthrottle(struct tty_struct *tty)
+{
+ struct SICC_info *info = (struct SICC_info *) tty->driver_data;
+ unsigned long flags;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ siccuart_send_xchar(tty, START_CHAR(tty));
+ }
+
+ if (tty->termios->c_cflag & CRTSCTS) {
+ /* disable interrupts while setting modem control lines */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ info->mctrl |= TIOCM_RTS;
+ info->port->set_mctrl(info->port, info->mctrl);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ }
+}
+
+static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo)
+{
+ struct SICC_state *state = info->state;
+ struct SICC_port *port = info->port;
+ struct serial_struct tmp;
+
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = 0;
+ tmp.line = state->line;
+ tmp.port = port->uart_base;
+ if (HIGH_BITS_OFFSET)
+ tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET;
+ tmp.irq = port->irqrx;
+ tmp.flags = 0;
+ tmp.xmit_fifo_size = port->fifosize;
+ tmp.baud_base = port->uartclk / 16;
+ tmp.close_delay = state->close_delay;
+ tmp.closing_wait = state->closing_wait;
+ tmp.custom_divisor = state->custom_divisor;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int set_serial_info(struct SICC_info *info,
+ struct serial_struct *newinfo)
+{
+ struct serial_struct new_serial;
+ struct SICC_state *state, old_state;
+ struct SICC_port *port;
+ unsigned long new_port;
+ unsigned int i, change_irq, change_port;
+ int retval = 0;
+
+ if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+ return -EFAULT;
+
+ state = info->state;
+ old_state = *state;
+ port = info->port;
+
+ new_port = new_serial.port;
+ if (HIGH_BITS_OFFSET)
+ new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
+
+ change_irq = new_serial.irq != port->irqrx;
+ change_port = new_port != port->uart_base;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if (change_irq || change_port ||
+ (new_serial.baud_base != port->uartclk / 16) ||
+ (new_serial.close_delay != state->close_delay) ||
+ (new_serial.xmit_fifo_size != port->fifosize) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (state->flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ state->flags = ((state->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ state->custom_divisor = new_serial.custom_divisor;
+ goto check_and_exit;
+ }
+
+ if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
+ (new_serial.baud_base < 9600))
+ return -EINVAL;
+
+ if (new_serial.type && change_port) {
+ for (i = 0; i < SERIAL_SICC_NR; i++)
+ if ((port != sicc_ports + i) &&
+ sicc_ports[i].uart_base != new_port)
+ return -EADDRINUSE;
+ }
+
+ if ((change_port || change_irq) && (state->count > 1))
+ return -EBUSY;
+
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+ port->uartclk = new_serial.baud_base * 16;
+ state->flags = ((state->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
+ info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
+ (info->flags & ASYNC_INTERNAL_FLAGS));
+ state->custom_divisor = new_serial.custom_divisor;
+ state->close_delay = new_serial.close_delay * HZ / 100;
+ state->closing_wait = new_serial.closing_wait * HZ / 100;
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ port->fifosize = new_serial.xmit_fifo_size;
+
+ if (change_port || change_irq) {
+ /*
+ * We need to shutdown the serial port at the old
+ * port/irq combination.
+ */
+ siccuart_shutdown(info);
+ port->irqrx = new_serial.irq;
+ port->uart_base = new_port;
+ }
+
+check_and_exit:
+ if (!port->uart_base)
+ return 0;
+ if (info->flags & ASYNC_INITIALIZED) {
+ if ((old_state.flags & ASYNC_SPD_MASK) !=
+ (state->flags & ASYNC_SPD_MASK) ||
+ (old_state.custom_divisor != state->custom_divisor)) {
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
+ siccuart_change_speed(info, NULL);
+ }
+ } else
+ retval = siccuart_startup(info);
+ return retval;
+}
+
+
+/*
+ * get_lsr_info - get line status register info
+ */
+static int get_lsr_info(struct SICC_info *info, unsigned int *value)
+{
+ unsigned int result, status;
+ unsigned long flags;
+
+ /* disable interrupts while reading status from port */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ status = readb(info->port->uart_base + BL_SICC_LSR);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0;
+
+ /*
+ * If we're about to load something into the transmit
+ * register, we'll pretend the transmitter isn't empty to
+ * avoid a race condition (depending on when the transmit
+ * interrupt happens).
+ */
+ if (info->x_char ||
+ ((CIRC_CNT(info->xmit.head, info->xmit.tail,
+ SICC_XMIT_SIZE) > 0) &&
+ !info->tty->stopped && !info->tty->hw_stopped))
+ result &= TIOCSER_TEMT;
+
+ return put_user(result, value);
+}
+
+static int get_modem_info(struct SICC_info *info, unsigned int *value)
+{
+ unsigned int result = info->mctrl;
+
+ return put_user(result, value);
+}
+
+static int set_modem_info(struct SICC_info *info, unsigned int cmd,
+ unsigned int *value)
+{
+ unsigned int arg, old;
+ unsigned long flags;
+
+ if (get_user(arg, value))
+ return -EFAULT;
+
+ old = info->mctrl;
+ switch (cmd) {
+ case TIOCMBIS:
+ info->mctrl |= arg;
+ break;
+
+ case TIOCMBIC:
+ info->mctrl &= ~arg;
+ break;
+
+ case TIOCMSET:
+ info->mctrl = arg;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ /* disable interrupts while setting modem control lines */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ if (old != info->mctrl)
+ info->port->set_mctrl(info->port, info->mctrl);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ return 0;
+}
+
+static void siccuart_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+ unsigned int lcr_h;
+
+
+ /* disable interrupts while setting break state */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ lcr_h = readb(info->port + BL_SICC_LSR);
+ if (break_state == -1)
+ lcr_h |= _LSR_LB_MASK;
+ else
+ lcr_h &= ~_LSR_LB_MASK;
+ writeb(lcr_h, info->port + BL_SICC_LSRS);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+}
+
+static int siccuart_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct SICC_info *info = tty->driver_data;
+ struct SICC_icount cnow;
+ struct serial_icounter_struct icount;
+ unsigned long flags;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TIOCMGET:
+ return get_modem_info(info, (unsigned int *)arg);
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ return set_modem_info(info, cmd, (unsigned int *)arg);
+ case TIOCGSERIAL:
+ return get_serial_info(info,
+ (struct serial_struct *)arg);
+ case TIOCSSERIAL:
+ return set_serial_info(info,
+ (struct serial_struct *)arg);
+ case TIOCSERGETLSR: /* Get line status register */
+ return get_lsr_info(info, (unsigned int *)arg);
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+ return 0;
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ /* disable interrupts while getting interrupt count */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ cnow = info->state->icount;
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ icount.cts = cnow.cts;
+ icount.dsr = cnow.dsr;
+ icount.rng = cnow.rng;
+ icount.dcd = cnow.dcd;
+ icount.rx = cnow.rx;
+ icount.tx = cnow.tx;
+ icount.frame = cnow.frame;
+ icount.overrun = cnow.overrun;
+ icount.parity = cnow.parity;
+ icount.brk = cnow.brk;
+ icount.buf_overrun = cnow.buf_overrun;
+
+ return copy_to_user((void *)arg, &icount, sizeof(icount))
+ ? -EFAULT : 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ struct SICC_info *info = tty->driver_data;
+ unsigned long flags;
+ unsigned int cflag = tty->termios->c_cflag;
+
+ if ((cflag ^ old_termios->c_cflag) == 0 &&
+ RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
+ return;
+
+ siccuart_change_speed(info, old_termios);
+
+ /* Handle transition to B0 status */
+ if ((old_termios->c_cflag & CBAUD) &&
+ !(cflag & CBAUD)) {
+ /* disable interrupts while setting break state */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR);
+ info->port->set_mctrl(info->port, info->mctrl);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ }
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) &&
+ (cflag & CBAUD)) {
+ /* disable interrupts while setting break state */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ info->mctrl |= TIOCM_DTR;
+ if (!(cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags))
+ info->mctrl |= TIOCM_RTS;
+ info->port->set_mctrl(info->port, info->mctrl);
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ siccuart_start(tty);
+ }
+
+#if 0
+ /*
+ * No need to wake up processes in open wait, since they
+ * sample the CLOCAL flag once, and don't recheck it.
+ * XXX It's not clear whether the current behavior is correct
+ * or not. Hence, this may change.....
+ */
+ if (!(old_termios->c_cflag & CLOCAL) &&
+ (tty->termios->c_cflag & CLOCAL))
+ wake_up_interruptible(&info->open_wait);
+#endif
+}
+
+static void siccuart_close(struct tty_struct *tty, struct file *filp)
+{
+ struct SICC_info *info = tty->driver_data;
+ struct SICC_state *state;
+ unsigned long flags;
+
+ if (!info)
+ return;
+
+ state = info->state;
+
+ //pr_debug("siccuart_close() called\n");
+
+ /* lock tty->driver_data while closing port */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+
+ if (tty_hung_up_p(filp)) {
+ goto quick_close;
+ }
+
+ if ((tty->count == 1) && (state->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. state->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count);
+ state->count = 1;
+ }
+ if (--state->count < 0) {
+ printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count);
+ state->count = 0;
+ }
+ if (state->count) {
+ goto quick_close;
+ }
+ info->flags |= ASYNC_CLOSING;
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->state->closing_wait);
+ /*
+ * At this point, we stop accepting input. To do this, we
+ * disable the receive line status interrupts.
+ */
+ if (info->flags & ASYNC_INITIALIZED) {
+ siccuart_disable_rx_interrupt(info);
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
+ */
+ siccuart_wait_until_sent(tty, info->timeout);
+ }
+ siccuart_shutdown(info);
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+ if (tty->ldisc.flush_buffer)
+ tty->ldisc.flush_buffer(tty);
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = NULL;
+ if (info->blocked_open) {
+ if (info->state->close_delay) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(info->state->close_delay);
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+ return;
+
+quick_close:
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ return;
+}
+
+static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct SICC_info *info = (struct SICC_info *) tty->driver_data;
+ unsigned long char_time, expire;
+
+ if (info->port->fifosize == 0)
+ return;
+
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (info->timeout - HZ/50) / info->port->fifosize;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+
+ // Crazy!! sometimes the input arg 'timeout' can be negtive numbers :-(
+ if (timeout >= 0 && timeout < char_time)
+ char_time = timeout;
+ /*
+ * If the transmitter hasn't cleared in twice the approximate
+ * amount of time to send the entire FIFO, it probably won't
+ * ever clear. This assumes the UART isn't doing flow
+ * control, which is currently the case. Hence, if it ever
+ * takes longer than info->timeout, this is probably due to a
+ * UART bug of some kind. So, we clamp the timeout parameter at
+ * 2*info->timeout.
+ */
+ if (!timeout || timeout > 2 * info->timeout)
+ timeout = 2 * info->timeout;
+
+ expire = jiffies + timeout;
+ pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu char_time=%lu...\n",
+ tty->index, jiffies,
+ expire, char_time);
+ while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(char_time);
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, expire))
+ break;
+ }
+ set_current_state(TASK_RUNNING);
+}
+
+static void siccuart_hangup(struct tty_struct *tty)
+{
+ struct SICC_info *info = tty->driver_data;
+ struct SICC_state *state = info->state;
+
+ siccuart_flush_buffer(tty);
+ if (info->flags & ASYNC_CLOSING)
+ return;
+ siccuart_shutdown(info);
+ info->event = 0;
+ state->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = NULL;
+ wake_up_interruptible(&info->open_wait);
+}
+
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+ struct SICC_info *info)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ struct SICC_state *state = info->state;
+ unsigned long flags;
+ int do_clocal = 0, extra_count = 0, retval;
+
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+ return (info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS;
+ }
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, state->count is dropped by one, so that
+ * rs_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
+ /* lock while decrementing state->count */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ if (!tty_hung_up_p(filp)) {
+ extra_count = 1;
+ state->count--;
+ }
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ info->blocked_open++;
+ while (1) {
+ /* disable interrupts while setting modem control lines */
+ spin_lock_irqsave(&info->state->sicc_lock,flags);
+ if (tty->termios->c_cflag & CBAUD) {
+ info->mctrl = TIOCM_DTR | TIOCM_RTS;
+ info->port->set_mctrl(info->port, info->mctrl);
+ }
+ spin_unlock_irqrestore(&info->state->sicc_lock,flags);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & ASYNC_INITIALIZED)) {
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+ break;
+ }
+ if (!(info->flags & ASYNC_CLOSING) &&
+ (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&info->open_wait, &wait);
+ if (extra_count)
+ state->count++;
+ info->blocked_open--;
+ if (retval)
+ return retval;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+}
+
+static struct SICC_info *siccuart_get(int line)
+{
+ struct SICC_info *info;
+ struct SICC_state *state = sicc_state + line;
+
+ state->count++;
+ if (state->info)
+ return state->info;
+ info = kmalloc(sizeof(struct SICC_info), GFP_KERNEL);
+ if (info) {
+ memset(info, 0, sizeof(struct SICC_info));
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->delta_msr_wait);
+ info->flags = state->flags;
+ info->state = state;
+ info->port = sicc_ports + line;
+ tasklet_init(&info->tlet, siccuart_tasklet_action,
+ (unsigned long)info);
+ }
+ if (state->info) {
+ kfree(info);
+ return state->info;
+ }
+ state->info = info;
+ return info;
+}
+
+static int siccuart_open(struct tty_struct *tty, struct file *filp)
+{
+ struct SICC_info *info;
+ int retval, line = tty->index;
+
+
+ // is this a line that we've got?
+ if (line >= SERIAL_SICC_NR) {
+ return -ENODEV;
+ }
+
+ info = siccuart_get(line);
+ if (!info)
+ return -ENOMEM;
+
+ tty->driver_data = info;
+ info->tty = tty;
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ /*
+ * Make sure we have the temporary buffer allocated
+ */
+ if (!tmp_buf) {
+ unsigned long page = get_zeroed_page(GFP_KERNEL);
+ if (tmp_buf)
+ free_page(page);
+ else if (!page) {
+ return -ENOMEM;
+ }
+ tmp_buf = (u_char *)page;
+ }
+
+ /*
+ * If the port is in the middle of closing, bail out now.
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+ return -EAGAIN;
+ }
+
+ /*
+ * Start up the serial port
+ */
+ retval = siccuart_startup(info);
+ if (retval) {
+ return retval;
+ }
+
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+ return retval;
+ }
+
+#ifdef CONFIG_SERIAL_SICC_CONSOLE
+ if (siccuart_cons.cflag && siccuart_cons.index == line) {
+ tty->termios->c_cflag = siccuart_cons.cflag;
+ siccuart_cons.cflag = 0;
+ siccuart_change_speed(info, NULL);
+ }
+#endif
+ return 0;
+}
+
+static struct tty_operations sicc_ops = {
+ .open = siccuart_open,
+ .close = siccuart_close,
+ .write = siccuart_write,
+ .put_char = siccuart_put_char,
+ .flush_chars = siccuart_flush_chars,
+ .write_room = siccuart_write_room,
+ .chars_in_buffer = siccuart_chars_in_buffer,
+ .flush_buffer = siccuart_flush_buffer,
+ .ioctl = siccuart_ioctl,
+ .throttle = siccuart_throttle,
+ .unthrottle = siccuart_unthrottle,
+ .send_xchar = siccuart_send_xchar,
+ .set_termios = siccuart_set_termios,
+ .stop = siccuart_stop,
+ .start = siccuart_start,
+ .hangup = siccuart_hangup,
+ .break_ctl = siccuart_break_ctl,
+ .wait_until_sent = siccuart_wait_until_sent,
+};
+
+int __init siccuart_init(void)
+{
+ int i;
+ siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR);
+ if (!siccnormal_driver)
+ return -ENOMEM;
+ printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n");
+ siccnormal_driver->driver_name = "serial_sicc";
+ siccnormal_driver->owner = THIS_MODULE;
+ siccnormal_driver->name = SERIAL_SICC_NAME;
+ siccnormal_driver->major = SERIAL_SICC_MAJOR;
+ siccnormal_driver->minor_start = SERIAL_SICC_MINOR;
+ siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ siccnormal_driver->subtype = SERIAL_TYPE_NORMAL;
+ siccnormal_driver->init_termios = tty_std_termios;
+ siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+ tty_set_operations(siccnormal_driver, &sicc_ops);
+
+ if (tty_register_driver(siccnormal_driver))
+ panic("Couldn't register SICC serial driver\n");
+
+ for (i = 0; i < SERIAL_SICC_NR; i++) {
+ struct SICC_state *state = sicc_state + i;
+ state->line = i;
+ state->close_delay = 5 * HZ / 10;
+ state->closing_wait = 30 * HZ;
+ spin_lock_init(&state->sicc_lock);
+ }
+
+
+ return 0;
+}
+
+__initcall(siccuart_init);
+
+#ifdef CONFIG_SERIAL_SICC_CONSOLE
+/************** console driver *****************/
+
+/*
+ * This code is currently never used; console->read is never called.
+ * Therefore, although we have an implementation, we don't use it.
+ * FIXME: the "const char *s" should be fixed to "char *s" some day.
+ * (when the definition in include/linux/console.h is also fixed)
+ */
+#ifdef used_and_not_const_char_pointer
+static int siccuart_console_read(struct console *co, const char *s, u_int count)
+{
+ struct SICC_port *port = &sicc_ports[co->index];
+ unsigned int status;
+ char *w;
+ int c;
+
+ pr_debug("siccuart_console_read() called\n");
+
+ c = 0;
+ w = s;
+ while (c < count) {
+ if(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL) {
+ *w++ = readb(port->uart_base + BL_SICC_RBR);
+ c++;
+ } else {
+ // nothing more to get, return
+ return c;
+ }
+ }
+ // return the count
+ return c;
+}
+#endif
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void siccuart_console_write(struct console *co, const char *s, u_int count)
+{
+ struct SICC_port *port = &sicc_ports[co->index];
+ unsigned int old_cr;
+ int i;
+
+ /*
+ * First save the CR then disable the interrupts
+ */
+ old_cr = readb(port->uart_base + BL_SICC_TxCR);
+ writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base + BL_SICC_TxCR);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+ while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
+ writeb(s[i], port->uart_base + BL_SICC_TBR);
+ if (s[i] == '\n') {
+ while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
+ writeb('\r', port->uart_base + BL_SICC_TBR);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the TCR
+ */
+ while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
+ writeb(old_cr, port->uart_base + BL_SICC_TxCR);
+}
+
+/*
+ * Receive character from the serial port
+ */
+static int siccuart_console_wait_key(struct console *co)
+{
+ struct SICC_port *port = &sicc_ports[co->index];
+ int c;
+
+ while(!(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL));
+ c = readb(port->uart_base + BL_SICC_RBR);
+ return c;
+}
+
+static struct tty_driver *siccuart_console_device(struct console *c, int *index)
+{
+ *index = c->index;
+ return siccnormal_driver;
+}
+
+static int __init siccuart_console_setup(struct console *co, char *options)
+{
+ struct SICC_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ u_int cflag = CREAD | HUPCL | CLOCAL;
+ u_int lcr_h, quot;
+
+
+ if (co->index >= SERIAL_SICC_NR)
+ co->index = 0;
+
+ port = &sicc_ports[co->index];
+
+ if (port->uart_base == 0)
+ port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE);
+
+ if (options) {
+ char *s = options;
+ baud = simple_strtoul(s, NULL, 10);
+ while (*s >= '0' && *s <= '9')
+ s++;
+ if (*s) parity = *s++;
+ if (*s) bits = *s - '0';
+ }
+
+ /*
+ * Now construct a cflag setting.
+ */
+ switch (baud) {
+ case 1200: cflag |= B1200; break;
+ case 2400: cflag |= B2400; break;
+ case 4800: cflag |= B4800; break;
+ default: cflag |= B9600; baud = 9600; break;
+ case 19200: cflag |= B19200; break;
+ case 38400: cflag |= B38400; break;
+ case 57600: cflag |= B57600; break;
+ case 115200: cflag |= B115200; break;
+ }
+ switch (bits) {
+ case 7: cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; break;
+ default: cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; break;
+ }
+ switch (parity) {
+ case 'o':
+ case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD; break;
+ case 'e':
+ case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE | _LCR_PTY_ODD; break;
+ }
+
+ co->cflag = cflag;
+
+
+ {
+ // a copy of is inserted here ppc403SetBaud(com_port, (int)9600);
+ unsigned long divisor, clockSource, temp;
+ unsigned int rate = baud;
+
+ /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
+ powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
+
+ /* Determine Internal Baud Clock Frequency */
+ /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
+ /* SCCR (Serial Clock Control Register) on Vesta */
+ temp = powerpcMfclkgpcr();
+
+ if(temp & 0x00000080) {
+ clockSource = 324000000;
+ }
+ else {
+ clockSource = 216000000;
+ }
+ clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
+ divisor = clockSource/(16*rate) - 1;
+ /* divisor has only 12 bits of resolution */
+ if(divisor>0x00000FFF){
+ divisor=0x00000FFF;
+ }
+
+ quot = divisor;
+ }
+
+ writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH );
+ writeb( quot & 0x00000FF, port->uart_base + BL_SICC_BRDL );
+
+ /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
+ /* For now, do NOT use FIFOs since 403 UART did not have this */
+ /* capability and this driver was inherited from 403UART. */
+ writeb(_CTL2_EXTERN, port->uart_base + BL_SICC_CTL2);
+
+ writeb(lcr_h, port->uart_base + BL_SICC_LCR);
+ writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR);
+ writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR);
+
+ // writeb(, info->port->uart_base + BL_SICC_RCR );
+ /*
+ * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt
+ * + Transmitter Empty interrupt + Transmitter error interrupt disabled &
+ * Stop mode when CTS active enabled & Transmit Break + Pattern Generation
+ * mode disabled.
+ */
+
+ writeb( 0x00, port->uart_base + BL_SICC_IrCR ); // disable IrDA
+
+ readb(port->uart_base + BL_SICC_RBR);
+
+ writeb(0xf8, port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */
+
+ /* we will enable the port as we need it */
+
+ return 0;
+}
+
+static struct console siccuart_cons =
+{
+ .name = SERIAL_SICC_NAME,
+ .write = siccuart_console_write,
+#ifdef used_and_not_const_char_pointer
+ .read = siccuart_console_read,
+#endif
+ .device = siccuart_console_device,
+ .wait_key = siccuart_console_wait_key,
+ .setup = siccuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+void __init sicc_console_init(void)
+{
+ register_console(&siccuart_cons);
+}
+
+#endif /* CONFIG_SERIAL_SICC_CONSOLE */