Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
new file mode 100644
index 0000000..ca81002
--- /dev/null
+++ b/arch/ppc/kernel/ppc_htab.c
@@ -0,0 +1,467 @@
+/*
+ * PowerPC hash table management proc entry. Will show information
+ * about the current hash table and will allow changes to it.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/sysctl.h>
+#include <linux/ctype.h>
+#include <linux/threads.h>
+#include <linux/smp_lock.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/mmu.h>
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/system.h>
+#include <asm/reg.h>
+
+static int ppc_htab_show(struct seq_file *m, void *v);
+static ssize_t ppc_htab_write(struct file * file, const char __user * buffer,
+ size_t count, loff_t *ppos);
+extern PTE *Hash, *Hash_end;
+extern unsigned long Hash_size, Hash_mask;
+extern unsigned long _SDR1;
+extern unsigned long htab_reloads;
+extern unsigned long htab_preloads;
+extern unsigned long htab_evicts;
+extern unsigned long pte_misses;
+extern unsigned long pte_errors;
+extern unsigned int primary_pteg_full;
+extern unsigned int htab_hash_searches;
+
+static int ppc_htab_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ppc_htab_show, NULL);
+}
+
+struct file_operations ppc_htab_operations = {
+ .open = ppc_htab_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .write = ppc_htab_write,
+ .release = single_release,
+};
+
+static char *pmc1_lookup(unsigned long mmcr0)
+{
+ switch ( mmcr0 & (0x7f<<7) )
+ {
+ case 0x0:
+ return "none";
+ case MMCR0_PMC1_CYCLES:
+ return "cycles";
+ case MMCR0_PMC1_ICACHEMISS:
+ return "ic miss";
+ case MMCR0_PMC1_DTLB:
+ return "dtlb miss";
+ default:
+ return "unknown";
+ }
+}
+
+static char *pmc2_lookup(unsigned long mmcr0)
+{
+ switch ( mmcr0 & 0x3f )
+ {
+ case 0x0:
+ return "none";
+ case MMCR0_PMC2_CYCLES:
+ return "cycles";
+ case MMCR0_PMC2_DCACHEMISS:
+ return "dc miss";
+ case MMCR0_PMC2_ITLB:
+ return "itlb miss";
+ case MMCR0_PMC2_LOADMISSTIME:
+ return "load miss time";
+ default:
+ return "unknown";
+ }
+}
+
+/*
+ * print some useful info about the hash table. This function
+ * is _REALLY_ slow (see the nested for loops below) but nothing
+ * in here should be really timing critical. -- Cort
+ */
+static int ppc_htab_show(struct seq_file *m, void *v)
+{
+ unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
+#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE)
+ unsigned int kptes = 0, uptes = 0;
+ PTE *ptr;
+#endif /* CONFIG_PPC_STD_MMU */
+
+ if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
+ mmcr0 = mfspr(SPRN_MMCR0);
+ pmc1 = mfspr(SPRN_PMC1);
+ pmc2 = mfspr(SPRN_PMC2);
+ seq_printf(m,
+ "604 Performance Monitoring\n"
+ "MMCR0\t\t: %08lx %s%s ",
+ mmcr0,
+ ( mmcr0>>28 & 0x2 ) ? "(user mode counted)" : "",
+ ( mmcr0>>28 & 0x4 ) ? "(kernel mode counted)" : "");
+ seq_printf(m,
+ "\nPMC1\t\t: %08lx (%s)\n"
+ "PMC2\t\t: %08lx (%s)\n",
+ pmc1, pmc1_lookup(mmcr0),
+ pmc2, pmc2_lookup(mmcr0));
+ }
+
+#ifdef CONFIG_PPC_STD_MMU
+ /* if we don't have a htab */
+ if ( Hash_size == 0 ) {
+ seq_printf(m, "No Hash Table used\n");
+ return 0;
+ }
+
+#ifndef CONFIG_PPC64BRIDGE
+ for (ptr = Hash; ptr < Hash_end; ptr++) {
+ unsigned int mctx, vsid;
+
+ if (!ptr->v)
+ continue;
+ /* undo the esid skew */
+ vsid = ptr->vsid;
+ mctx = ((vsid - (vsid & 0xf) * 0x111) >> 4) & 0xfffff;
+ if (mctx == 0)
+ kptes++;
+ else
+ uptes++;
+ }
+#endif
+
+ seq_printf(m,
+ "PTE Hash Table Information\n"
+ "Size\t\t: %luKb\n"
+ "Buckets\t\t: %lu\n"
+ "Address\t\t: %08lx\n"
+ "Entries\t\t: %lu\n"
+#ifndef CONFIG_PPC64BRIDGE
+ "User ptes\t: %u\n"
+ "Kernel ptes\t: %u\n"
+ "Percent full\t: %lu%%\n"
+#endif
+ , (unsigned long)(Hash_size>>10),
+ (Hash_size/(sizeof(PTE)*8)),
+ (unsigned long)Hash,
+ Hash_size/sizeof(PTE)
+#ifndef CONFIG_PPC64BRIDGE
+ , uptes,
+ kptes,
+ ((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
+#endif
+ );
+
+ seq_printf(m,
+ "Reloads\t\t: %lu\n"
+ "Preloads\t: %lu\n"
+ "Searches\t: %u\n"
+ "Overflows\t: %u\n"
+ "Evicts\t\t: %lu\n",
+ htab_reloads, htab_preloads, htab_hash_searches,
+ primary_pteg_full, htab_evicts);
+#endif /* CONFIG_PPC_STD_MMU */
+
+ seq_printf(m,
+ "Non-error misses: %lu\n"
+ "Error misses\t: %lu\n",
+ pte_misses, pte_errors);
+ return 0;
+}
+
+/*
+ * Allow user to define performance counters and resize the hash table
+ */
+static ssize_t ppc_htab_write(struct file * file, const char __user * ubuffer,
+ size_t count, loff_t *ppos)
+{
+#ifdef CONFIG_PPC_STD_MMU
+ unsigned long tmp;
+ char buffer[16];
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (strncpy_from_user(buffer, ubuffer, 15))
+ return -EFAULT;
+ buffer[15] = 0;
+
+ /* don't set the htab size for now */
+ if ( !strncmp( buffer, "size ", 5) )
+ return -EBUSY;
+
+ if ( !strncmp( buffer, "reset", 5) )
+ {
+ if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
+ /* reset PMC1 and PMC2 */
+ mtspr(SPRN_PMC1, 0);
+ mtspr(SPRN_PMC2, 0);
+ }
+ htab_reloads = 0;
+ htab_evicts = 0;
+ pte_misses = 0;
+ pte_errors = 0;
+ }
+
+ /* Everything below here requires the performance monitor feature. */
+ if (!cpu_has_feature(CPU_FTR_604_PERF_MON))
+ return count;
+
+ /* turn off performance monitoring */
+ if ( !strncmp( buffer, "off", 3) )
+ {
+ mtspr(SPRN_MMCR0, 0);
+ mtspr(SPRN_PMC1, 0);
+ mtspr(SPRN_PMC2, 0);
+ }
+
+ if ( !strncmp( buffer, "user", 4) )
+ {
+ /* setup mmcr0 and clear the correct pmc */
+ tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x20000000;
+ mtspr(SPRN_MMCR0, tmp);
+ mtspr(SPRN_PMC1, 0);
+ mtspr(SPRN_PMC2, 0);
+ }
+
+ if ( !strncmp( buffer, "kernel", 6) )
+ {
+ /* setup mmcr0 and clear the correct pmc */
+ tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x40000000;
+ mtspr(SPRN_MMCR0, tmp);
+ mtspr(SPRN_PMC1, 0);
+ mtspr(SPRN_PMC2, 0);
+ }
+
+ /* PMC1 values */
+ if ( !strncmp( buffer, "dtlb", 4) )
+ {
+ /* setup mmcr0 and clear the correct pmc */
+ tmp = (mfspr(SPRN_MMCR0) & ~(0x7F << 7)) | MMCR0_PMC1_DTLB;
+ mtspr(SPRN_MMCR0, tmp);
+ mtspr(SPRN_PMC1, 0);
+ }
+
+ if ( !strncmp( buffer, "ic miss", 7) )
+ {
+ /* setup mmcr0 and clear the correct pmc */
+ tmp = (mfspr(SPRN_MMCR0) & ~(0x7F<<7)) | MMCR0_PMC1_ICACHEMISS;
+ mtspr(SPRN_MMCR0, tmp);
+ mtspr(SPRN_PMC1, 0);
+ }
+
+ /* PMC2 values */
+ if ( !strncmp( buffer, "load miss time", 14) )
+ {
+ /* setup mmcr0 and clear the correct pmc */
+ asm volatile(
+ "mfspr %0,%1\n\t" /* get current mccr0 */
+ "rlwinm %0,%0,0,0,31-6\n\t" /* clear bits [26-31] */
+ "ori %0,%0,%2 \n\t" /* or in mmcr0 settings */
+ "mtspr %1,%0 \n\t" /* set new mccr0 */
+ "mtspr %3,%4 \n\t" /* reset the pmc */
+ : "=r" (tmp)
+ : "i" (SPRN_MMCR0),
+ "i" (MMCR0_PMC2_LOADMISSTIME),
+ "i" (SPRN_PMC2), "r" (0) );
+ }
+
+ if ( !strncmp( buffer, "itlb", 4) )
+ {
+ /* setup mmcr0 and clear the correct pmc */
+ asm volatile(
+ "mfspr %0,%1\n\t" /* get current mccr0 */
+ "rlwinm %0,%0,0,0,31-6\n\t" /* clear bits [26-31] */
+ "ori %0,%0,%2 \n\t" /* or in mmcr0 settings */
+ "mtspr %1,%0 \n\t" /* set new mccr0 */
+ "mtspr %3,%4 \n\t" /* reset the pmc */
+ : "=r" (tmp)
+ : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_ITLB),
+ "i" (SPRN_PMC2), "r" (0) );
+ }
+
+ if ( !strncmp( buffer, "dc miss", 7) )
+ {
+ /* setup mmcr0 and clear the correct pmc */
+ asm volatile(
+ "mfspr %0,%1\n\t" /* get current mccr0 */
+ "rlwinm %0,%0,0,0,31-6\n\t" /* clear bits [26-31] */
+ "ori %0,%0,%2 \n\t" /* or in mmcr0 settings */
+ "mtspr %1,%0 \n\t" /* set new mccr0 */
+ "mtspr %3,%4 \n\t" /* reset the pmc */
+ : "=r" (tmp)
+ : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_DCACHEMISS),
+ "i" (SPRN_PMC2), "r" (0) );
+ }
+
+ return count;
+#else /* CONFIG_PPC_STD_MMU */
+ return 0;
+#endif /* CONFIG_PPC_STD_MMU */
+}
+
+int proc_dol2crvec(ctl_table *table, int write, struct file *filp,
+ void __user *buffer_arg, size_t *lenp, loff_t *ppos)
+{
+ int vleft, first=1, len, left, val;
+ char __user *buffer = (char __user *) buffer_arg;
+ #define TMPBUFLEN 256
+ char buf[TMPBUFLEN], *p;
+ static const char *sizestrings[4] = {
+ "2MB", "256KB", "512KB", "1MB"
+ };
+ static const char *clockstrings[8] = {
+ "clock disabled", "+1 clock", "+1.5 clock", "reserved(3)",
+ "+2 clock", "+2.5 clock", "+3 clock", "reserved(7)"
+ };
+ static const char *typestrings[4] = {
+ "flow-through burst SRAM", "reserved SRAM",
+ "pipelined burst SRAM", "pipelined late-write SRAM"
+ };
+ static const char *holdstrings[4] = {
+ "0.5", "1.0", "(reserved2)", "(reserved3)"
+ };
+
+ if (!cpu_has_feature(CPU_FTR_L2CR))
+ return -EFAULT;
+
+ if ( /*!table->maxlen ||*/ (*ppos && !write)) {
+ *lenp = 0;
+ return 0;
+ }
+
+ vleft = table->maxlen / sizeof(int);
+ left = *lenp;
+
+ for (; left /*&& vleft--*/; first=0) {
+ if (write) {
+ while (left) {
+ char c;
+ if(get_user(c, buffer))
+ return -EFAULT;
+ if (!isspace(c))
+ break;
+ left--;
+ buffer++;
+ }
+ if (!left)
+ break;
+ len = left;
+ if (len > TMPBUFLEN-1)
+ len = TMPBUFLEN-1;
+ if(copy_from_user(buf, buffer, len))
+ return -EFAULT;
+ buf[len] = 0;
+ p = buf;
+ if (*p < '0' || *p > '9')
+ break;
+ val = simple_strtoul(p, &p, 0);
+ len = p-buf;
+ if ((len < left) && *p && !isspace(*p))
+ break;
+ buffer += len;
+ left -= len;
+ _set_L2CR(val);
+ } else {
+ p = buf;
+ if (!first)
+ *p++ = '\t';
+ val = _get_L2CR();
+ p += sprintf(p, "0x%08x: ", val);
+ p += sprintf(p, " %s", (val >> 31) & 1 ? "enabled" :
+ "disabled");
+ p += sprintf(p, ", %sparity", (val>>30)&1 ? "" : "no ");
+ p += sprintf(p, ", %s", sizestrings[(val >> 28) & 3]);
+ p += sprintf(p, ", %s", clockstrings[(val >> 25) & 7]);
+ p += sprintf(p, ", %s", typestrings[(val >> 23) & 2]);
+ p += sprintf(p, "%s", (val>>22)&1 ? ", data only" : "");
+ p += sprintf(p, "%s", (val>>20)&1 ? ", ZZ enabled": "");
+ p += sprintf(p, ", %s", (val>>19)&1 ? "write-through" :
+ "copy-back");
+ p += sprintf(p, "%s", (val>>18)&1 ? ", testing" : "");
+ p += sprintf(p, ", %sns hold",holdstrings[(val>>16)&3]);
+ p += sprintf(p, "%s", (val>>15)&1 ? ", DLL slow" : "");
+ p += sprintf(p, "%s", (val>>14)&1 ? ", diff clock" :"");
+ p += sprintf(p, "%s", (val>>13)&1 ? ", DLL bypass" :"");
+
+ p += sprintf(p,"\n");
+
+ len = strlen(buf);
+ if (len > left)
+ len = left;
+ if (copy_to_user(buffer, buf, len))
+ return -EFAULT;
+ left -= len;
+ buffer += len;
+ break;
+ }
+ }
+
+ if (!write && !first && left) {
+ if(put_user('\n', (char __user *) buffer))
+ return -EFAULT;
+ left--, buffer++;
+ }
+ if (write) {
+ char __user *s = (char __user *) buffer;
+ while (left) {
+ char c;
+ if(get_user(c, s++))
+ return -EFAULT;
+ if (!isspace(c))
+ break;
+ left--;
+ }
+ }
+ if (write && first)
+ return -EINVAL;
+ *lenp -= left;
+ *ppos += *lenp;
+ return 0;
+}
+
+#ifdef CONFIG_SYSCTL
+/*
+ * Register our sysctl.
+ */
+static ctl_table htab_ctl_table[]={
+ {
+ .ctl_name = KERN_PPC_L2CR,
+ .procname = "l2cr",
+ .mode = 0644,
+ .proc_handler = &proc_dol2crvec,
+ },
+ { 0, },
+};
+static ctl_table htab_sysctl_root[] = {
+ { 1, "kernel", NULL, 0, 0755, htab_ctl_table, },
+ { 0,},
+};
+
+static int __init
+register_ppc_htab_sysctl(void)
+{
+ register_sysctl_table(htab_sysctl_root, 0);
+
+ return 0;
+}
+
+__initcall(register_ppc_htab_sysctl);
+#endif