Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc/oprofile/Kconfig b/arch/ppc/oprofile/Kconfig
new file mode 100644
index 0000000..19d3773
--- /dev/null
+++ b/arch/ppc/oprofile/Kconfig
@@ -0,0 +1,23 @@
+
+menu "Profiling support"
+ depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+endmenu
+
diff --git a/arch/ppc/oprofile/Makefile b/arch/ppc/oprofile/Makefile
new file mode 100644
index 0000000..e2218d3
--- /dev/null
+++ b/arch/ppc/oprofile/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) common.o
+
+ifeq ($(CONFIG_FSL_BOOKE),y)
+ oprofile-y += op_model_fsl_booke.o
+endif
+
diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c
new file mode 100644
index 0000000..3169c67
--- /dev/null
+++ b/arch/ppc/oprofile/common.c
@@ -0,0 +1,161 @@
+/*
+ * PPC 32 oprofile support
+ * Based on PPC64 oprofile support
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Copyright (C) Freescale Semiconductor, Inc 2004
+ *
+ * Author: Andy Fleming
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/perfmon.h>
+#include <asm/cputable.h>
+
+#include "op_impl.h"
+
+static struct op_ppc32_model *model;
+
+static struct op_counter_config ctr[OP_MAX_COUNTER];
+static struct op_system_config sys;
+
+static void op_handle_interrupt(struct pt_regs *regs)
+{
+ model->handle_interrupt(regs, ctr);
+}
+
+static int op_ppc32_setup(void)
+{
+ /* Install our interrupt handler into the existing hook. */
+ if(request_perfmon_irq(&op_handle_interrupt))
+ return -EBUSY;
+
+ mb();
+
+ /* Pre-compute the values to stuff in the hardware registers. */
+ model->reg_setup(ctr, &sys, model->num_counters);
+
+#if 0
+ /* FIXME: Make multi-cpu work */
+ /* Configure the registers on all cpus. */
+ on_each_cpu(model->reg_setup, NULL, 0, 1);
+#endif
+
+ return 0;
+}
+
+static void op_ppc32_shutdown(void)
+{
+ mb();
+
+ /* Remove our interrupt handler. We may be removing this module. */
+ free_perfmon_irq();
+}
+
+static void op_ppc32_cpu_start(void *dummy)
+{
+ model->start(ctr);
+}
+
+static int op_ppc32_start(void)
+{
+ on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
+ return 0;
+}
+
+static inline void op_ppc32_cpu_stop(void *dummy)
+{
+ model->stop();
+}
+
+static void op_ppc32_stop(void)
+{
+ on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
+}
+
+static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
+{
+ int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry *dir;
+ char buf[3];
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+
+ oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+
+ /* FIXME: Not sure if this is used */
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+ }
+
+ oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
+ oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+
+ /* Default to tracing both kernel and user */
+ sys.enable_kernel = 1;
+ sys.enable_user = 1;
+
+ return 0;
+}
+
+static struct oprofile_operations oprof_ppc32_ops = {
+ .create_files = op_ppc32_create_files,
+ .setup = op_ppc32_setup,
+ .shutdown = op_ppc32_shutdown,
+ .start = op_ppc32_start,
+ .stop = op_ppc32_stop,
+ .cpu_type = NULL /* To be filled in below. */
+};
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ char *name;
+ int cpu_id = smp_processor_id();
+
+#ifdef CONFIG_FSL_BOOKE
+ model = &op_model_fsl_booke;
+#else
+ return -ENODEV;
+#endif
+
+ name = kmalloc(32, GFP_KERNEL);
+
+ if (NULL == name)
+ return -ENOMEM;
+
+ sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
+
+ oprof_ppc32_ops.cpu_type = name;
+
+ model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
+
+ *ops = oprof_ppc32_ops;
+
+ printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+ oprof_ppc32_ops.cpu_type);
+
+ return 0;
+}
+
+void oprofile_arch_exit(void)
+{
+ kfree(oprof_ppc32_ops.cpu_type);
+ oprof_ppc32_ops.cpu_type = NULL;
+}
diff --git a/arch/ppc/oprofile/op_impl.h b/arch/ppc/oprofile/op_impl.h
new file mode 100644
index 0000000..bc336dc
--- /dev/null
+++ b/arch/ppc/oprofile/op_impl.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Based on alpha version.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef OP_IMPL_H
+#define OP_IMPL_H 1
+
+#define OP_MAX_COUNTER 8
+
+/* Per-counter configuration as set via oprofilefs. */
+struct op_counter_config {
+ unsigned long enabled;
+ unsigned long event;
+ unsigned long count;
+ unsigned long kernel;
+ unsigned long user;
+ unsigned long unit_mask;
+};
+
+/* System-wide configuration as set via oprofilefs. */
+struct op_system_config {
+ unsigned long enable_kernel;
+ unsigned long enable_user;
+};
+
+/* Per-arch configuration */
+struct op_ppc32_model {
+ void (*reg_setup) (struct op_counter_config *,
+ struct op_system_config *,
+ int num_counters);
+ void (*start) (struct op_counter_config *);
+ void (*stop) (void);
+ void (*handle_interrupt) (struct pt_regs *,
+ struct op_counter_config *);
+ int num_counters;
+};
+
+#endif /* OP_IMPL_H */
diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/ppc/oprofile/op_model_fsl_booke.c
new file mode 100644
index 0000000..fc9c859
--- /dev/null
+++ b/arch/ppc/oprofile/op_model_fsl_booke.c
@@ -0,0 +1,184 @@
+/*
+ * oprofile/op_model_e500.c
+ *
+ * Freescale Book-E oprofile support, based on ppc64 oprofile support
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala <Kumar.Gala@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/reg_booke.h>
+#include <asm/page.h>
+#include <asm/perfmon.h>
+
+#include "op_impl.h"
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int num_counters;
+static int oprofile_running;
+
+static inline unsigned int ctr_read(unsigned int i)
+{
+ switch(i) {
+ case 0:
+ return mfpmr(PMRN_PMC0);
+ case 1:
+ return mfpmr(PMRN_PMC1);
+ case 2:
+ return mfpmr(PMRN_PMC2);
+ case 3:
+ return mfpmr(PMRN_PMC3);
+ default:
+ return 0;
+ }
+}
+
+static inline void ctr_write(unsigned int i, unsigned int val)
+{
+ switch(i) {
+ case 0:
+ mtpmr(PMRN_PMC0, val);
+ break;
+ case 1:
+ mtpmr(PMRN_PMC1, val);
+ break;
+ case 2:
+ mtpmr(PMRN_PMC2, val);
+ break;
+ case 3:
+ mtpmr(PMRN_PMC3, val);
+ break;
+ default:
+ break;
+ }
+}
+
+
+static void fsl_booke_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int i;
+
+ num_counters = num_ctrs;
+
+ /* freeze all counters */
+ pmc_stop_ctrs();
+
+ /* Our counters count up, and "count" refers to
+ * how much before the next interrupt, and we interrupt
+ * on overflow. So we calculate the starting value
+ * which will give us "count" until overflow.
+ * Then we set the events on the enabled counters */
+ for (i = 0; i < num_counters; ++i) {
+ reset_value[i] = 0x80000000UL - ctr[i].count;
+
+ init_pmc_stop(i);
+
+ set_pmc_event(i, ctr[i].event);
+
+ set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
+ }
+}
+
+static void fsl_booke_start(struct op_counter_config *ctr)
+{
+ int i;
+
+ mtmsr(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < num_counters; ++i) {
+ if (ctr[i].enabled) {
+ ctr_write(i, reset_value[i]);
+ /* Set Each enabled counterd to only
+ * count when the Mark bit is not set */
+ set_pmc_marked(i, 1, 0);
+ pmc_start_ctr(i, 1);
+ } else {
+ ctr_write(i, 0);
+
+ /* Set the ctr to be stopped */
+ pmc_start_ctr(i, 0);
+ }
+ }
+
+ /* Clear the freeze bit, and enable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs(1);
+
+ oprofile_running = 1;
+
+ pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
+ mfpmr(PMRN_PMGC0));
+}
+
+static void fsl_booke_stop(void)
+{
+ /* freeze counters */
+ pmc_stop_ctrs();
+
+ oprofile_running = 0;
+
+ pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
+ mfpmr(PMRN_PMGC0));
+
+ mb();
+}
+
+
+static void fsl_booke_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned long pc;
+ int is_kernel;
+ int val;
+ int i;
+
+ /* set the PMM bit (see comment below) */
+ mtmsr(mfmsr() | MSR_PMM);
+
+ pc = regs->nip;
+ is_kernel = (pc >= KERNELBASE);
+
+ for (i = 0; i < num_counters; ++i) {
+ val = ctr_read(i);
+ if (val < 0) {
+ if (oprofile_running && ctr[i].enabled) {
+ oprofile_add_pc(pc, is_kernel, i);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+ }
+
+ /* The freeze bit was set by the interrupt. */
+ /* Clear the freeze bit, and reenable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs(1);
+}
+
+struct op_ppc32_model op_model_fsl_booke = {
+ .reg_setup = fsl_booke_reg_setup,
+ .start = fsl_booke_start,
+ .stop = fsl_booke_stop,
+ .handle_interrupt = fsl_booke_handle_interrupt,
+};