Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
new file mode 100644
index 0000000..58310aa
--- /dev/null
+++ b/arch/sparc64/kernel/pci_common.c
@@ -0,0 +1,1040 @@
+/* $Id: pci_common.c,v 1.29 2002/02/01 00:56:03 davem Exp $
+ * pci_common.c: PCI controller common support.
+ *
+ * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ */
+
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#include <asm/pbm.h>
+
+/* Fix self device of BUS and hook it into BUS->self.
+ * The pci_scan_bus does not do this for the host bridge.
+ */
+void __init pci_fixup_host_bridge_self(struct pci_bus *pbus)
+{
+ struct pci_dev *pdev;
+
+ list_for_each_entry(pdev, &pbus->devices, bus_list) {
+ if (pdev->class >> 8 == PCI_CLASS_BRIDGE_HOST) {
+ pbus->self = pdev;
+ return;
+ }
+ }
+
+ prom_printf("PCI: Critical error, cannot find host bridge PDEV.\n");
+ prom_halt();
+}
+
+/* Find the OBP PROM device tree node for a PCI device.
+ * Return zero if not found.
+ */
+static int __init find_device_prom_node(struct pci_pbm_info *pbm,
+ struct pci_dev *pdev,
+ int bus_prom_node,
+ struct linux_prom_pci_registers *pregs,
+ int *nregs)
+{
+ int node;
+
+ /*
+ * Return the PBM's PROM node in case we are it's PCI device,
+ * as the PBM's reg property is different to standard PCI reg
+ * properties. We would delete this device entry otherwise,
+ * which confuses XFree86's device probing...
+ */
+ if ((pdev->bus->number == pbm->pci_bus->number) && (pdev->devfn == 0) &&
+ (pdev->vendor == PCI_VENDOR_ID_SUN) &&
+ (pdev->device == PCI_DEVICE_ID_SUN_PBM ||
+ pdev->device == PCI_DEVICE_ID_SUN_SCHIZO ||
+ pdev->device == PCI_DEVICE_ID_SUN_TOMATILLO ||
+ pdev->device == PCI_DEVICE_ID_SUN_SABRE ||
+ pdev->device == PCI_DEVICE_ID_SUN_HUMMINGBIRD)) {
+ *nregs = 0;
+ return bus_prom_node;
+ }
+
+ node = prom_getchild(bus_prom_node);
+ while (node != 0) {
+ int err = prom_getproperty(node, "reg",
+ (char *)pregs,
+ sizeof(*pregs) * PROMREG_MAX);
+ if (err == 0 || err == -1)
+ goto do_next_sibling;
+ if (((pregs[0].phys_hi >> 8) & 0xff) == pdev->devfn) {
+ *nregs = err / sizeof(*pregs);
+ return node;
+ }
+
+ do_next_sibling:
+ node = prom_getsibling(node);
+ }
+ return 0;
+}
+
+/* Older versions of OBP on PCI systems encode 64-bit MEM
+ * space assignments incorrectly, this fixes them up. We also
+ * take the opportunity here to hide other kinds of bogus
+ * assignments.
+ */
+static void __init fixup_obp_assignments(struct pci_dev *pdev,
+ struct pcidev_cookie *pcp)
+{
+ int i;
+
+ if (pdev->vendor == PCI_VENDOR_ID_AL &&
+ (pdev->device == PCI_DEVICE_ID_AL_M7101 ||
+ pdev->device == PCI_DEVICE_ID_AL_M1533)) {
+ int i;
+
+ /* Zap all of the normal resources, they are
+ * meaningless and generate bogus resource collision
+ * messages. This is OpenBoot's ill-fated attempt to
+ * represent the implicit resources that these devices
+ * have.
+ */
+ pcp->num_prom_assignments = 0;
+ for (i = 0; i < 6; i++) {
+ pdev->resource[i].start =
+ pdev->resource[i].end =
+ pdev->resource[i].flags = 0;
+ }
+ pdev->resource[PCI_ROM_RESOURCE].start =
+ pdev->resource[PCI_ROM_RESOURCE].end =
+ pdev->resource[PCI_ROM_RESOURCE].flags = 0;
+ return;
+ }
+
+ for (i = 0; i < pcp->num_prom_assignments; i++) {
+ struct linux_prom_pci_registers *ap;
+ int space;
+
+ ap = &pcp->prom_assignments[i];
+ space = ap->phys_hi >> 24;
+ if ((space & 0x3) == 2 &&
+ (space & 0x4) != 0) {
+ ap->phys_hi &= ~(0x7 << 24);
+ ap->phys_hi |= 0x3 << 24;
+ }
+ }
+}
+
+/* Fill in the PCI device cookie sysdata for the given
+ * PCI device. This cookie is the means by which one
+ * can get to OBP and PCI controller specific information
+ * for a PCI device.
+ */
+static void __init pdev_cookie_fillin(struct pci_pbm_info *pbm,
+ struct pci_dev *pdev,
+ int bus_prom_node)
+{
+ struct linux_prom_pci_registers pregs[PROMREG_MAX];
+ struct pcidev_cookie *pcp;
+ int device_prom_node, nregs, err;
+
+ device_prom_node = find_device_prom_node(pbm, pdev, bus_prom_node,
+ pregs, &nregs);
+ if (device_prom_node == 0) {
+ /* If it is not in the OBP device tree then
+ * there must be a damn good reason for it.
+ *
+ * So what we do is delete the device from the
+ * PCI device tree completely. This scenario
+ * is seen, for example, on CP1500 for the
+ * second EBUS/HappyMeal pair if the external
+ * connector for it is not present.
+ */
+ pci_remove_bus_device(pdev);
+ return;
+ }
+
+ pcp = kmalloc(sizeof(*pcp), GFP_ATOMIC);
+ if (pcp == NULL) {
+ prom_printf("PCI_COOKIE: Fatal malloc error, aborting...\n");
+ prom_halt();
+ }
+ pcp->pbm = pbm;
+ pcp->prom_node = device_prom_node;
+ memcpy(pcp->prom_regs, pregs, sizeof(pcp->prom_regs));
+ pcp->num_prom_regs = nregs;
+ err = prom_getproperty(device_prom_node, "name",
+ pcp->prom_name, sizeof(pcp->prom_name));
+ if (err > 0)
+ pcp->prom_name[err] = 0;
+ else
+ pcp->prom_name[0] = 0;
+
+ err = prom_getproperty(device_prom_node,
+ "assigned-addresses",
+ (char *)pcp->prom_assignments,
+ sizeof(pcp->prom_assignments));
+ if (err == 0 || err == -1)
+ pcp->num_prom_assignments = 0;
+ else
+ pcp->num_prom_assignments =
+ (err / sizeof(pcp->prom_assignments[0]));
+
+ if (strcmp(pcp->prom_name, "ebus") == 0) {
+ struct linux_prom_ebus_ranges erng[PROM_PCIRNG_MAX];
+ int iter;
+
+ /* EBUS is special... */
+ err = prom_getproperty(device_prom_node, "ranges",
+ (char *)&erng[0], sizeof(erng));
+ if (err == 0 || err == -1) {
+ prom_printf("EBUS: Fatal error, no range property\n");
+ prom_halt();
+ }
+ err = (err / sizeof(erng[0]));
+ for(iter = 0; iter < err; iter++) {
+ struct linux_prom_ebus_ranges *ep = &erng[iter];
+ struct linux_prom_pci_registers *ap;
+
+ ap = &pcp->prom_assignments[iter];
+
+ ap->phys_hi = ep->parent_phys_hi;
+ ap->phys_mid = ep->parent_phys_mid;
+ ap->phys_lo = ep->parent_phys_lo;
+ ap->size_hi = 0;
+ ap->size_lo = ep->size;
+ }
+ pcp->num_prom_assignments = err;
+ }
+
+ fixup_obp_assignments(pdev, pcp);
+
+ pdev->sysdata = pcp;
+}
+
+void __init pci_fill_in_pbm_cookies(struct pci_bus *pbus,
+ struct pci_pbm_info *pbm,
+ int prom_node)
+{
+ struct pci_dev *pdev, *pdev_next;
+ struct pci_bus *this_pbus, *pbus_next;
+
+ /* This must be _safe because the cookie fillin
+ routine can delete devices from the tree. */
+ list_for_each_entry_safe(pdev, pdev_next, &pbus->devices, bus_list)
+ pdev_cookie_fillin(pbm, pdev, prom_node);
+
+ list_for_each_entry_safe(this_pbus, pbus_next, &pbus->children, node) {
+ struct pcidev_cookie *pcp = this_pbus->self->sysdata;
+
+ pci_fill_in_pbm_cookies(this_pbus, pbm, pcp->prom_node);
+ }
+}
+
+static void __init bad_assignment(struct pci_dev *pdev,
+ struct linux_prom_pci_registers *ap,
+ struct resource *res,
+ int do_prom_halt)
+{
+ prom_printf("PCI: Bogus PROM assignment. BUS[%02x] DEVFN[%x]\n",
+ pdev->bus->number, pdev->devfn);
+ if (ap)
+ prom_printf("PCI: phys[%08x:%08x:%08x] size[%08x:%08x]\n",
+ ap->phys_hi, ap->phys_mid, ap->phys_lo,
+ ap->size_hi, ap->size_lo);
+ if (res)
+ prom_printf("PCI: RES[%016lx-->%016lx:(%lx)]\n",
+ res->start, res->end, res->flags);
+ prom_printf("Please email this information to davem@redhat.com\n");
+ if (do_prom_halt)
+ prom_halt();
+}
+
+static struct resource *
+__init get_root_resource(struct linux_prom_pci_registers *ap,
+ struct pci_pbm_info *pbm)
+{
+ int space = (ap->phys_hi >> 24) & 3;
+
+ switch (space) {
+ case 0:
+ /* Configuration space, silently ignore it. */
+ return NULL;
+
+ case 1:
+ /* 16-bit IO space */
+ return &pbm->io_space;
+
+ case 2:
+ /* 32-bit MEM space */
+ return &pbm->mem_space;
+
+ case 3:
+ /* 64-bit MEM space, these are allocated out of
+ * the 32-bit mem_space range for the PBM, ie.
+ * we just zero out the upper 32-bits.
+ */
+ return &pbm->mem_space;
+
+ default:
+ printk("PCI: What is resource space %x? "
+ "Tell davem@redhat.com about it!\n", space);
+ return NULL;
+ };
+}
+
+static struct resource *
+__init get_device_resource(struct linux_prom_pci_registers *ap,
+ struct pci_dev *pdev)
+{
+ struct resource *res;
+ int breg = (ap->phys_hi & 0xff);
+
+ switch (breg) {
+ case PCI_ROM_ADDRESS:
+ /* Unfortunately I have seen several cases where
+ * buggy FCODE uses a space value of '1' (I/O space)
+ * in the register property for the ROM address
+ * so disable this sanity check for now.
+ */
+#if 0
+ {
+ int space = (ap->phys_hi >> 24) & 3;
+
+ /* It had better be MEM space. */
+ if (space != 2)
+ bad_assignment(pdev, ap, NULL, 0);
+ }
+#endif
+ res = &pdev->resource[PCI_ROM_RESOURCE];
+ break;
+
+ case PCI_BASE_ADDRESS_0:
+ case PCI_BASE_ADDRESS_1:
+ case PCI_BASE_ADDRESS_2:
+ case PCI_BASE_ADDRESS_3:
+ case PCI_BASE_ADDRESS_4:
+ case PCI_BASE_ADDRESS_5:
+ res = &pdev->resource[(breg - PCI_BASE_ADDRESS_0) / 4];
+ break;
+
+ default:
+ bad_assignment(pdev, ap, NULL, 0);
+ res = NULL;
+ break;
+ };
+
+ return res;
+}
+
+static int __init pdev_resource_collisions_expected(struct pci_dev *pdev)
+{
+ if (pdev->vendor != PCI_VENDOR_ID_SUN)
+ return 0;
+
+ if (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS ||
+ pdev->device == PCI_DEVICE_ID_SUN_RIO_1394 ||
+ pdev->device == PCI_DEVICE_ID_SUN_RIO_USB)
+ return 1;
+
+ return 0;
+}
+
+static void __init pdev_record_assignments(struct pci_pbm_info *pbm,
+ struct pci_dev *pdev)
+{
+ struct pcidev_cookie *pcp = pdev->sysdata;
+ int i;
+
+ for (i = 0; i < pcp->num_prom_assignments; i++) {
+ struct linux_prom_pci_registers *ap;
+ struct resource *root, *res;
+
+ /* The format of this property is specified in
+ * the PCI Bus Binding to IEEE1275-1994.
+ */
+ ap = &pcp->prom_assignments[i];
+ root = get_root_resource(ap, pbm);
+ res = get_device_resource(ap, pdev);
+ if (root == NULL || res == NULL ||
+ res->flags == 0)
+ continue;
+
+ /* Ok we know which resource this PROM assignment is
+ * for, sanity check it.
+ */
+ if ((res->start & 0xffffffffUL) != ap->phys_lo)
+ bad_assignment(pdev, ap, res, 1);
+
+ /* If it is a 64-bit MEM space assignment, verify that
+ * the resource is too and that the upper 32-bits match.
+ */
+ if (((ap->phys_hi >> 24) & 3) == 3) {
+ if (((res->flags & IORESOURCE_MEM) == 0) ||
+ ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
+ != PCI_BASE_ADDRESS_MEM_TYPE_64))
+ bad_assignment(pdev, ap, res, 1);
+ if ((res->start >> 32) != ap->phys_mid)
+ bad_assignment(pdev, ap, res, 1);
+
+ /* PBM cannot generate cpu initiated PIOs
+ * to the full 64-bit space. Therefore the
+ * upper 32-bits better be zero. If it is
+ * not, just skip it and we will assign it
+ * properly ourselves.
+ */
+ if ((res->start >> 32) != 0UL) {
+ printk(KERN_ERR "PCI: OBP assigns out of range MEM address "
+ "%016lx for region %ld on device %s\n",
+ res->start, (res - &pdev->resource[0]), pci_name(pdev));
+ continue;
+ }
+ }
+
+ /* Adjust the resource into the physical address space
+ * of this PBM.
+ */
+ pbm->parent->resource_adjust(pdev, res, root);
+
+ if (request_resource(root, res) < 0) {
+ /* OK, there is some conflict. But this is fine
+ * since we'll reassign it in the fixup pass.
+ *
+ * We notify the user that OBP made an error if it
+ * is a case we don't expect.
+ */
+ if (!pdev_resource_collisions_expected(pdev)) {
+ printk(KERN_ERR "PCI: Address space collision on region %ld "
+ "[%016lx:%016lx] of device %s\n",
+ (res - &pdev->resource[0]),
+ res->start, res->end,
+ pci_name(pdev));
+ }
+ }
+ }
+}
+
+void __init pci_record_assignments(struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *dev;
+ struct pci_bus *bus;
+
+ list_for_each_entry(dev, &pbus->devices, bus_list)
+ pdev_record_assignments(pbm, dev);
+
+ list_for_each_entry(bus, &pbus->children, node)
+ pci_record_assignments(pbm, bus);
+}
+
+/* Return non-zero if PDEV has implicit I/O resources even
+ * though it may not have an I/O base address register
+ * active.
+ */
+static int __init has_implicit_io(struct pci_dev *pdev)
+{
+ int class = pdev->class >> 8;
+
+ if (class == PCI_CLASS_NOT_DEFINED ||
+ class == PCI_CLASS_NOT_DEFINED_VGA ||
+ class == PCI_CLASS_STORAGE_IDE ||
+ (pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
+ return 1;
+
+ return 0;
+}
+
+static void __init pdev_assign_unassigned(struct pci_pbm_info *pbm,
+ struct pci_dev *pdev)
+{
+ u32 reg;
+ u16 cmd;
+ int i, io_seen, mem_seen;
+
+ io_seen = mem_seen = 0;
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ struct resource *root, *res;
+ unsigned long size, min, max, align;
+
+ res = &pdev->resource[i];
+
+ if (res->flags & IORESOURCE_IO)
+ io_seen++;
+ else if (res->flags & IORESOURCE_MEM)
+ mem_seen++;
+
+ /* If it is already assigned or the resource does
+ * not exist, there is nothing to do.
+ */
+ if (res->parent != NULL || res->flags == 0UL)
+ continue;
+
+ /* Determine the root we allocate from. */
+ if (res->flags & IORESOURCE_IO) {
+ root = &pbm->io_space;
+ min = root->start + 0x400UL;
+ max = root->end;
+ } else {
+ root = &pbm->mem_space;
+ min = root->start;
+ max = min + 0x80000000UL;
+ }
+
+ size = res->end - res->start;
+ align = size + 1;
+ if (allocate_resource(root, res, size + 1, min, max, align, NULL, NULL) < 0) {
+ /* uh oh */
+ prom_printf("PCI: Failed to allocate resource %d for %s\n",
+ i, pci_name(pdev));
+ prom_halt();
+ }
+
+ /* Update PCI config space. */
+ pbm->parent->base_address_update(pdev, i);
+ }
+
+ /* Special case, disable the ROM. Several devices
+ * act funny (ie. do not respond to memory space writes)
+ * when it is left enabled. A good example are Qlogic,ISP
+ * adapters.
+ */
+ pci_read_config_dword(pdev, PCI_ROM_ADDRESS, ®);
+ reg &= ~PCI_ROM_ADDRESS_ENABLE;
+ pci_write_config_dword(pdev, PCI_ROM_ADDRESS, reg);
+
+ /* If we saw I/O or MEM resources, enable appropriate
+ * bits in PCI command register.
+ */
+ if (io_seen || mem_seen) {
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if (io_seen || has_implicit_io(pdev))
+ cmd |= PCI_COMMAND_IO;
+ if (mem_seen)
+ cmd |= PCI_COMMAND_MEMORY;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+ }
+
+ /* If this is a PCI bridge or an IDE controller,
+ * enable bus mastering. In the former case also
+ * set the cache line size correctly.
+ */
+ if (((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) ||
+ (((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) &&
+ ((pdev->class & 0x80) != 0))) {
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+ if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
+ pci_write_config_byte(pdev,
+ PCI_CACHE_LINE_SIZE,
+ (64 / sizeof(u32)));
+ }
+}
+
+void __init pci_assign_unassigned(struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *dev;
+ struct pci_bus *bus;
+
+ list_for_each_entry(dev, &pbus->devices, bus_list)
+ pdev_assign_unassigned(pbm, dev);
+
+ list_for_each_entry(bus, &pbus->children, node)
+ pci_assign_unassigned(pbm, bus);
+}
+
+static int __init pci_intmap_match(struct pci_dev *pdev, unsigned int *interrupt)
+{
+ struct linux_prom_pci_intmap bridge_local_intmap[PROM_PCIIMAP_MAX], *intmap;
+ struct linux_prom_pci_intmask bridge_local_intmask, *intmask;
+ struct pcidev_cookie *dev_pcp = pdev->sysdata;
+ struct pci_pbm_info *pbm = dev_pcp->pbm;
+ struct linux_prom_pci_registers *pregs = dev_pcp->prom_regs;
+ unsigned int hi, mid, lo, irq;
+ int i, num_intmap, map_slot;
+
+ intmap = &pbm->pbm_intmap[0];
+ intmask = &pbm->pbm_intmask;
+ num_intmap = pbm->num_pbm_intmap;
+ map_slot = 0;
+
+ /* If we are underneath a PCI bridge, use PROM register
+ * property of the parent bridge which is closest to
+ * the PBM.
+ *
+ * However if that parent bridge has interrupt map/mask
+ * properties of its own we use the PROM register property
+ * of the next child device on the path to PDEV.
+ *
+ * In detail the two cases are (note that the 'X' below is the
+ * 'next child on the path to PDEV' mentioned above):
+ *
+ * 1) PBM --> PCI bus lacking int{map,mask} --> X ... PDEV
+ *
+ * Here we use regs of 'PCI bus' device.
+ *
+ * 2) PBM --> PCI bus with int{map,mask} --> X ... PDEV
+ *
+ * Here we use regs of 'X'. Note that X can be PDEV.
+ */
+ if (pdev->bus->number != pbm->pci_first_busno) {
+ struct pcidev_cookie *bus_pcp, *regs_pcp;
+ struct pci_dev *bus_dev, *regs_dev;
+ int plen;
+
+ bus_dev = pdev->bus->self;
+ regs_dev = pdev;
+
+ while (bus_dev->bus &&
+ bus_dev->bus->number != pbm->pci_first_busno) {
+ regs_dev = bus_dev;
+ bus_dev = bus_dev->bus->self;
+ }
+
+ regs_pcp = regs_dev->sysdata;
+ pregs = regs_pcp->prom_regs;
+
+ bus_pcp = bus_dev->sysdata;
+
+ /* But if the PCI bridge has it's own interrupt map
+ * and mask properties, use that and the regs of the
+ * PCI entity at the next level down on the path to the
+ * device.
+ */
+ plen = prom_getproperty(bus_pcp->prom_node, "interrupt-map",
+ (char *) &bridge_local_intmap[0],
+ sizeof(bridge_local_intmap));
+ if (plen != -1) {
+ intmap = &bridge_local_intmap[0];
+ num_intmap = plen / sizeof(struct linux_prom_pci_intmap);
+ plen = prom_getproperty(bus_pcp->prom_node,
+ "interrupt-map-mask",
+ (char *) &bridge_local_intmask,
+ sizeof(bridge_local_intmask));
+ if (plen == -1) {
+ printk("pci_intmap_match: Warning! Bridge has intmap "
+ "but no intmask.\n");
+ printk("pci_intmap_match: Trying to recover.\n");
+ return 0;
+ }
+
+ if (pdev->bus->self != bus_dev)
+ map_slot = 1;
+ } else {
+ pregs = bus_pcp->prom_regs;
+ map_slot = 1;
+ }
+ }
+
+ if (map_slot) {
+ *interrupt = ((*interrupt
+ - 1
+ + PCI_SLOT(pdev->devfn)) & 0x3) + 1;
+ }
+
+ hi = pregs->phys_hi & intmask->phys_hi;
+ mid = pregs->phys_mid & intmask->phys_mid;
+ lo = pregs->phys_lo & intmask->phys_lo;
+ irq = *interrupt & intmask->interrupt;
+
+ for (i = 0; i < num_intmap; i++) {
+ if (intmap[i].phys_hi == hi &&
+ intmap[i].phys_mid == mid &&
+ intmap[i].phys_lo == lo &&
+ intmap[i].interrupt == irq) {
+ *interrupt = intmap[i].cinterrupt;
+ printk("PCI-IRQ: Routing bus[%2x] slot[%2x] map[%d] to INO[%02x]\n",
+ pdev->bus->number, PCI_SLOT(pdev->devfn),
+ map_slot, *interrupt);
+ return 1;
+ }
+ }
+
+ /* We will run this code even if pbm->num_pbm_intmap is zero, just so
+ * we can apply the slot mapping to the PROM interrupt property value.
+ * So do not spit out these warnings in that case.
+ */
+ if (num_intmap != 0) {
+ /* Print it both to OBP console and kernel one so that if bootup
+ * hangs here the user has the information to report.
+ */
+ prom_printf("pci_intmap_match: bus %02x, devfn %02x: ",
+ pdev->bus->number, pdev->devfn);
+ prom_printf("IRQ [%08x.%08x.%08x.%08x] not found in interrupt-map\n",
+ pregs->phys_hi, pregs->phys_mid, pregs->phys_lo, *interrupt);
+ prom_printf("Please email this information to davem@redhat.com\n");
+
+ printk("pci_intmap_match: bus %02x, devfn %02x: ",
+ pdev->bus->number, pdev->devfn);
+ printk("IRQ [%08x.%08x.%08x.%08x] not found in interrupt-map\n",
+ pregs->phys_hi, pregs->phys_mid, pregs->phys_lo, *interrupt);
+ printk("Please email this information to davem@redhat.com\n");
+ }
+
+ return 0;
+}
+
+static void __init pdev_fixup_irq(struct pci_dev *pdev)
+{
+ struct pcidev_cookie *pcp = pdev->sysdata;
+ struct pci_pbm_info *pbm = pcp->pbm;
+ struct pci_controller_info *p = pbm->parent;
+ unsigned int portid = pbm->portid;
+ unsigned int prom_irq;
+ int prom_node = pcp->prom_node;
+ int err;
+
+ /* If this is an empty EBUS device, sometimes OBP fails to
+ * give it a valid fully specified interrupts property.
+ * The EBUS hooked up to SunHME on PCI I/O boards of
+ * Ex000 systems is one such case.
+ *
+ * The interrupt is not important so just ignore it.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_SUN &&
+ pdev->device == PCI_DEVICE_ID_SUN_EBUS &&
+ !prom_getchild(prom_node)) {
+ pdev->irq = 0;
+ return;
+ }
+
+ err = prom_getproperty(prom_node, "interrupts",
+ (char *)&prom_irq, sizeof(prom_irq));
+ if (err == 0 || err == -1) {
+ pdev->irq = 0;
+ return;
+ }
+
+ /* Fully specified already? */
+ if (((prom_irq & PCI_IRQ_IGN) >> 6) == portid) {
+ pdev->irq = p->irq_build(pbm, pdev, prom_irq);
+ goto have_irq;
+ }
+
+ /* An onboard device? (bit 5 set) */
+ if ((prom_irq & PCI_IRQ_INO) & 0x20) {
+ pdev->irq = p->irq_build(pbm, pdev, (portid << 6 | prom_irq));
+ goto have_irq;
+ }
+
+ /* Can we find a matching entry in the interrupt-map? */
+ if (pci_intmap_match(pdev, &prom_irq)) {
+ pdev->irq = p->irq_build(pbm, pdev, (portid << 6) | prom_irq);
+ goto have_irq;
+ }
+
+ /* Ok, we have to do it the hard way. */
+ {
+ unsigned int bus, slot, line;
+
+ bus = (pbm == &pbm->parent->pbm_B) ? (1 << 4) : 0;
+
+ /* If we have a legal interrupt property, use it as
+ * the IRQ line.
+ */
+ if (prom_irq > 0 && prom_irq < 5) {
+ line = ((prom_irq - 1) & 3);
+ } else {
+ u8 pci_irq_line;
+
+ /* Else just directly consult PCI config space. */
+ pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pci_irq_line);
+ line = ((pci_irq_line - 1) & 3);
+ }
+
+ /* Now figure out the slot.
+ *
+ * Basically, device number zero on the top-level bus is
+ * always the PCI host controller. Slot 0 is then device 1.
+ * PBM A supports two external slots (0 and 1), and PBM B
+ * supports 4 external slots (0, 1, 2, and 3). On-board PCI
+ * devices are wired to device numbers outside of these
+ * ranges. -DaveM
+ */
+ if (pdev->bus->number == pbm->pci_first_busno) {
+ slot = PCI_SLOT(pdev->devfn) - pbm->pci_first_slot;
+ } else {
+ struct pci_dev *bus_dev;
+
+ /* Underneath a bridge, use slot number of parent
+ * bridge which is closest to the PBM.
+ */
+ bus_dev = pdev->bus->self;
+ while (bus_dev->bus &&
+ bus_dev->bus->number != pbm->pci_first_busno)
+ bus_dev = bus_dev->bus->self;
+
+ slot = PCI_SLOT(bus_dev->devfn) - pbm->pci_first_slot;
+ }
+ slot = slot << 2;
+
+ pdev->irq = p->irq_build(pbm, pdev,
+ ((portid << 6) & PCI_IRQ_IGN) |
+ (bus | slot | line));
+ }
+
+have_irq:
+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE,
+ pdev->irq & PCI_IRQ_INO);
+}
+
+void __init pci_fixup_irq(struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *dev;
+ struct pci_bus *bus;
+
+ list_for_each_entry(dev, &pbus->devices, bus_list)
+ pdev_fixup_irq(dev);
+
+ list_for_each_entry(bus, &pbus->children, node)
+ pci_fixup_irq(pbm, bus);
+}
+
+static void pdev_setup_busmastering(struct pci_dev *pdev, int is_66mhz)
+{
+ u16 cmd;
+ u8 hdr_type, min_gnt, ltimer;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER;
+ pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+ /* Read it back, if the mastering bit did not
+ * get set, the device does not support bus
+ * mastering so we have nothing to do here.
+ */
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if ((cmd & PCI_COMMAND_MASTER) == 0)
+ return;
+
+ /* Set correct cache line size, 64-byte on all
+ * Sparc64 PCI systems. Note that the value is
+ * measured in 32-bit words.
+ */
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
+ 64 / sizeof(u32));
+
+ pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr_type);
+ hdr_type &= ~0x80;
+ if (hdr_type != PCI_HEADER_TYPE_NORMAL)
+ return;
+
+ /* If the latency timer is already programmed with a non-zero
+ * value, assume whoever set it (OBP or whoever) knows what
+ * they are doing.
+ */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, <imer);
+ if (ltimer != 0)
+ return;
+
+ /* XXX Since I'm tipping off the min grant value to
+ * XXX choose a suitable latency timer value, I also
+ * XXX considered making use of the max latency value
+ * XXX as well. Unfortunately I've seen too many bogusly
+ * XXX low settings for it to the point where it lacks
+ * XXX any usefulness. In one case, an ethernet card
+ * XXX claimed a min grant of 10 and a max latency of 5.
+ * XXX Now, if I had two such cards on the same bus I
+ * XXX could not set the desired burst period (calculated
+ * XXX from min grant) without violating the max latency
+ * XXX bound. Duh...
+ * XXX
+ * XXX I blame dumb PC bios implementors for stuff like
+ * XXX this, most of them don't even try to do something
+ * XXX sensible with latency timer values and just set some
+ * XXX default value (usually 32) into every device.
+ */
+
+ pci_read_config_byte(pdev, PCI_MIN_GNT, &min_gnt);
+
+ if (min_gnt == 0) {
+ /* If no min_gnt setting then use a default
+ * value.
+ */
+ if (is_66mhz)
+ ltimer = 16;
+ else
+ ltimer = 32;
+ } else {
+ int shift_factor;
+
+ if (is_66mhz)
+ shift_factor = 2;
+ else
+ shift_factor = 3;
+
+ /* Use a default value when the min_gnt value
+ * is erroneously high.
+ */
+ if (((unsigned int) min_gnt << shift_factor) > 512 ||
+ ((min_gnt << shift_factor) & 0xff) == 0) {
+ ltimer = 8 << shift_factor;
+ } else {
+ ltimer = min_gnt << shift_factor;
+ }
+ }
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, ltimer);
+}
+
+void pci_determine_66mhz_disposition(struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *pdev;
+ int all_are_66mhz;
+ u16 status;
+
+ if (pbm->is_66mhz_capable == 0) {
+ all_are_66mhz = 0;
+ goto out;
+ }
+
+ all_are_66mhz = 1;
+ list_for_each_entry(pdev, &pbus->devices, bus_list) {
+ pci_read_config_word(pdev, PCI_STATUS, &status);
+ if (!(status & PCI_STATUS_66MHZ)) {
+ all_are_66mhz = 0;
+ break;
+ }
+ }
+out:
+ pbm->all_devs_66mhz = all_are_66mhz;
+
+ printk("PCI%d(PBM%c): Bus running at %dMHz\n",
+ pbm->parent->index,
+ (pbm == &pbm->parent->pbm_A) ? 'A' : 'B',
+ (all_are_66mhz ? 66 : 33));
+}
+
+void pci_setup_busmastering(struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *dev;
+ struct pci_bus *bus;
+ int is_66mhz;
+
+ is_66mhz = pbm->is_66mhz_capable && pbm->all_devs_66mhz;
+
+ list_for_each_entry(dev, &pbus->devices, bus_list)
+ pdev_setup_busmastering(dev, is_66mhz);
+
+ list_for_each_entry(bus, &pbus->children, node)
+ pci_setup_busmastering(pbm, bus);
+}
+
+void pci_register_legacy_regions(struct resource *io_res,
+ struct resource *mem_res)
+{
+ struct resource *p;
+
+ /* VGA Video RAM. */
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return;
+
+ memset(p, 0, sizeof(*p));
+ p->name = "Video RAM area";
+ p->start = mem_res->start + 0xa0000UL;
+ p->end = p->start + 0x1ffffUL;
+ p->flags = IORESOURCE_BUSY;
+ request_resource(mem_res, p);
+
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return;
+
+ memset(p, 0, sizeof(*p));
+ p->name = "System ROM";
+ p->start = mem_res->start + 0xf0000UL;
+ p->end = p->start + 0xffffUL;
+ p->flags = IORESOURCE_BUSY;
+ request_resource(mem_res, p);
+
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return;
+
+ memset(p, 0, sizeof(*p));
+ p->name = "Video ROM";
+ p->start = mem_res->start + 0xc0000UL;
+ p->end = p->start + 0x7fffUL;
+ p->flags = IORESOURCE_BUSY;
+ request_resource(mem_res, p);
+}
+
+/* Generic helper routines for PCI error reporting. */
+void pci_scan_for_target_abort(struct pci_controller_info *p,
+ struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *pdev;
+ struct pci_bus *bus;
+
+ list_for_each_entry(pdev, &pbus->devices, bus_list) {
+ u16 status, error_bits;
+
+ pci_read_config_word(pdev, PCI_STATUS, &status);
+ error_bits =
+ (status & (PCI_STATUS_SIG_TARGET_ABORT |
+ PCI_STATUS_REC_TARGET_ABORT));
+ if (error_bits) {
+ pci_write_config_word(pdev, PCI_STATUS, error_bits);
+ printk("PCI%d(PBM%c): Device [%s] saw Target Abort [%016x]\n",
+ p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'),
+ pci_name(pdev), status);
+ }
+ }
+
+ list_for_each_entry(bus, &pbus->children, node)
+ pci_scan_for_target_abort(p, pbm, bus);
+}
+
+void pci_scan_for_master_abort(struct pci_controller_info *p,
+ struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *pdev;
+ struct pci_bus *bus;
+
+ list_for_each_entry(pdev, &pbus->devices, bus_list) {
+ u16 status, error_bits;
+
+ pci_read_config_word(pdev, PCI_STATUS, &status);
+ error_bits =
+ (status & (PCI_STATUS_REC_MASTER_ABORT));
+ if (error_bits) {
+ pci_write_config_word(pdev, PCI_STATUS, error_bits);
+ printk("PCI%d(PBM%c): Device [%s] received Master Abort [%016x]\n",
+ p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'),
+ pci_name(pdev), status);
+ }
+ }
+
+ list_for_each_entry(bus, &pbus->children, node)
+ pci_scan_for_master_abort(p, pbm, bus);
+}
+
+void pci_scan_for_parity_error(struct pci_controller_info *p,
+ struct pci_pbm_info *pbm,
+ struct pci_bus *pbus)
+{
+ struct pci_dev *pdev;
+ struct pci_bus *bus;
+
+ list_for_each_entry(pdev, &pbus->devices, bus_list) {
+ u16 status, error_bits;
+
+ pci_read_config_word(pdev, PCI_STATUS, &status);
+ error_bits =
+ (status & (PCI_STATUS_PARITY |
+ PCI_STATUS_DETECTED_PARITY));
+ if (error_bits) {
+ pci_write_config_word(pdev, PCI_STATUS, error_bits);
+ printk("PCI%d(PBM%c): Device [%s] saw Parity Error [%016x]\n",
+ p->index, ((pbm == &p->pbm_A) ? 'A' : 'B'),
+ pci_name(pdev), status);
+ }
+ }
+
+ list_for_each_entry(bus, &pbus->children, node)
+ pci_scan_for_parity_error(p, pbm, bus);
+}