Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
new file mode 100644
index 0000000..ef2c439
--- /dev/null
+++ b/arch/v850/kernel/as85ep1.ld
@@ -0,0 +1,49 @@
+/* Linker script for the NEC AS85EP1 V850E evaluation board
+ (CONFIG_V850E_AS85EP1). */
+
+MEMORY {
+ /* 1MB of internal instruction memory. */
+ iMEM0 : ORIGIN = 0, LENGTH = 0x00100000
+
+ /* 1MB of static RAM. */
+ SRAM : ORIGIN = SRAM_ADDR, LENGTH = SRAM_SIZE
+
+ /* About 58MB of DRAM. This can actually be at one of two
+ positions, determined by jump JP3; we have to use the first
+ position because the second is partially out of processor
+ instruction addressing range (though in the second position
+ there's actually 64MB available). */
+ SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
+}
+
+SECTIONS {
+ .resetv : {
+ __intv_start = . ;
+ *(.intv.reset) /* Reset vector */
+ } > iMEM0
+
+ .sram : {
+ RAMK_KRAM_CONTENTS
+
+ /* We stick most of the interrupt vectors here; they'll be
+ copied into the proper location by the early init code (we
+ can't put them directly in the right place because of
+ hardware bugs). The vectors shouldn't need to be
+ relocated, so we don't have to use `> ... AT> ...' to
+ split the load/vm addresses (and we can't because of
+ problems with the loader). */
+ . = ALIGN (0x10) ;
+ __intv_copy_src_start = . ;
+ *(.intv.common) /* Vectors common to all v850e proc. */
+ *(.intv.mach) /* Machine-specific int. vectors. */
+ . = ALIGN (0x10) ;
+ __intv_copy_src_end = . ;
+ } > SRAM
+
+ /* Where we end up putting the vectors. */
+ __intv_copy_dst_start = 0x10 ;
+ __intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
+ __intv_end = __intv_copy_dst_end ;
+
+ .root : { ROOT_FS_CONTENTS } > SDRAM
+}