Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/v850/kernel/v850e2_cache.c b/arch/v850/kernel/v850e2_cache.c
new file mode 100644
index 0000000..4570312
--- /dev/null
+++ b/arch/v850/kernel/v850e2_cache.c
@@ -0,0 +1,127 @@
+/*
+ * arch/v850/kernel/v850e2_cache.c -- Cache control for V850E2 cache
+ * memories
+ *
+ * Copyright (C) 2003 NEC Electronics Corporation
+ * Copyright (C) 2003 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#include <linux/mm.h>
+
+#include <asm/v850e2_cache.h>
+
+/* Cache operations we can do. The encoding corresponds directly to the
+ value we need to write into the COPR register. */
+enum cache_op {
+ OP_SYNC_IF_DIRTY = V850E2_CACHE_COPR_CFC(0), /* 000 */
+ OP_SYNC_IF_VALID = V850E2_CACHE_COPR_CFC(1), /* 001 */
+ OP_SYNC_IF_VALID_AND_CLEAR = V850E2_CACHE_COPR_CFC(3), /* 011 */
+ OP_WAY_CLEAR = V850E2_CACHE_COPR_CFC(4), /* 100 */
+ OP_FILL = V850E2_CACHE_COPR_CFC(5), /* 101 */
+ OP_CLEAR = V850E2_CACHE_COPR_CFC(6), /* 110 */
+ OP_CREATE_DIRTY = V850E2_CACHE_COPR_CFC(7) /* 111 */
+};
+
+/* Which cache to use. This encoding also corresponds directly to the
+ value we need to write into the COPR register. */
+enum cache {
+ ICACHE = 0,
+ DCACHE = V850E2_CACHE_COPR_LBSL
+};
+
+/* Returns ADDR rounded down to the beginning of its cache-line. */
+#define CACHE_LINE_ADDR(addr) \
+ ((addr) & ~(V850E2_CACHE_LINE_SIZE - 1))
+/* Returns END_ADDR rounded up to the `limit' of its cache-line. */
+#define CACHE_LINE_END_ADDR(end_addr) \
+ CACHE_LINE_ADDR(end_addr + (V850E2_CACHE_LINE_SIZE - 1))
+
+
+/* Low-level cache ops. */
+
+/* Apply cache-op OP to all entries in CACHE. */
+static inline void cache_op_all (enum cache_op op, enum cache cache)
+{
+ int cmd = op | cache | V850E2_CACHE_COPR_WSLE | V850E2_CACHE_COPR_STRT;
+
+ if (op != OP_WAY_CLEAR) {
+ /* The WAY_CLEAR operation does the whole way, but other
+ ops take begin-index and count params; we just indicate
+ the entire cache. */
+ V850E2_CACHE_CADL = 0;
+ V850E2_CACHE_CADH = 0;
+ V850E2_CACHE_CCNT = V850E2_CACHE_WAY_SIZE - 1;
+ }
+
+ V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(0); /* way 0 */
+ V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(1); /* way 1 */
+ V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(2); /* way 2 */
+ V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(3); /* way 3 */
+}
+
+/* Apply cache-op OP to all entries in CACHE covering addresses ADDR
+ through ADDR+LEN. */
+static inline void cache_op_range (enum cache_op op, u32 addr, u32 len,
+ enum cache cache)
+{
+ u32 start = CACHE_LINE_ADDR (addr);
+ u32 end = CACHE_LINE_END_ADDR (addr + len);
+ u32 num_lines = (end - start) >> V850E2_CACHE_LINE_SIZE_BITS;
+
+ V850E2_CACHE_CADL = start & 0xFFFF;
+ V850E2_CACHE_CADH = start >> 16;
+ V850E2_CACHE_CCNT = num_lines - 1;
+
+ V850E2_CACHE_COPR = op | cache | V850E2_CACHE_COPR_STRT;
+}
+
+
+/* High-level ops. */
+
+static void cache_exec_after_store_all (void)
+{
+ cache_op_all (OP_SYNC_IF_DIRTY, DCACHE);
+ cache_op_all (OP_WAY_CLEAR, ICACHE);
+}
+
+static void cache_exec_after_store_range (u32 start, u32 len)
+{
+ cache_op_range (OP_SYNC_IF_DIRTY, start, len, DCACHE);
+ cache_op_range (OP_CLEAR, start, len, ICACHE);
+}
+
+
+/* Exported functions. */
+
+void flush_icache (void)
+{
+ cache_exec_after_store_all ();
+}
+
+void flush_icache_range (unsigned long start, unsigned long end)
+{
+ cache_exec_after_store_range (start, end - start);
+}
+
+void flush_icache_page (struct vm_area_struct *vma, struct page *page)
+{
+ cache_exec_after_store_range (page_to_virt (page), PAGE_SIZE);
+}
+
+void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
+ unsigned long addr, int len)
+{
+ cache_exec_after_store_range (addr, len);
+}
+
+void flush_cache_sigtramp (unsigned long addr)
+{
+ /* For the exact size, see signal.c, but 16 bytes should be enough. */
+ cache_exec_after_store_range (addr, 16);
+}