Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/acpi/executer/exregion.c b/drivers/acpi/executer/exregion.c
new file mode 100644
index 0000000..7cfd068
--- /dev/null
+++ b/drivers/acpi/executer/exregion.c
@@ -0,0 +1,528 @@
+
+/******************************************************************************
+ *
+ * Module Name: exregion - ACPI default op_region (address space) handlers
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+
+
+#define _COMPONENT ACPI_EXECUTER
+ ACPI_MODULE_NAME ("exregion")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_system_memory_space_handler
+ *
+ * PARAMETERS: Function - Read or Write operation
+ * Address - Where in the space to read or write
+ * bit_width - Field width in bits (8, 16, or 32)
+ * Value - Pointer to in or out value
+ * handler_context - Pointer to Handler's context
+ * region_context - Pointer to context specific to the
+ * accessed region
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Handler for the System Memory address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_memory_space_handler (
+ u32 function,
+ acpi_physical_address address,
+ u32 bit_width,
+ acpi_integer *value,
+ void *handler_context,
+ void *region_context)
+{
+ acpi_status status = AE_OK;
+ void *logical_addr_ptr = NULL;
+ struct acpi_mem_space_context *mem_info = region_context;
+ u32 length;
+ acpi_size window_size;
+#ifndef ACPI_MISALIGNED_TRANSFERS
+ u32 remainder;
+#endif
+
+ ACPI_FUNCTION_TRACE ("ex_system_memory_space_handler");
+
+
+ /* Validate and translate the bit width */
+
+ switch (bit_width) {
+ case 8:
+ length = 1;
+ break;
+
+ case 16:
+ length = 2;
+ break;
+
+ case 32:
+ length = 4;
+ break;
+
+ case 64:
+ length = 8;
+ break;
+
+ default:
+ ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid system_memory width %d\n",
+ bit_width));
+ return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
+ }
+
+
+#ifndef ACPI_MISALIGNED_TRANSFERS
+ /*
+ * Hardware does not support non-aligned data transfers, we must verify
+ * the request.
+ */
+ (void) acpi_ut_short_divide ((acpi_integer) address, length, NULL, &remainder);
+ if (remainder != 0) {
+ return_ACPI_STATUS (AE_AML_ALIGNMENT);
+ }
+#endif
+
+ /*
+ * Does the request fit into the cached memory mapping?
+ * Is 1) Address below the current mapping? OR
+ * 2) Address beyond the current mapping?
+ */
+ if ((address < mem_info->mapped_physical_address) ||
+ (((acpi_integer) address + length) >
+ ((acpi_integer) mem_info->mapped_physical_address + mem_info->mapped_length))) {
+ /*
+ * The request cannot be resolved by the current memory mapping;
+ * Delete the existing mapping and create a new one.
+ */
+ if (mem_info->mapped_length) {
+ /* Valid mapping, delete it */
+
+ acpi_os_unmap_memory (mem_info->mapped_logical_address,
+ mem_info->mapped_length);
+ }
+
+ /*
+ * Don't attempt to map memory beyond the end of the region, and
+ * constrain the maximum mapping size to something reasonable.
+ */
+ window_size = (acpi_size) ((mem_info->address + mem_info->length) - address);
+ if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
+ window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
+ }
+
+ /* Create a new mapping starting at the address given */
+
+ status = acpi_os_map_memory (address, window_size,
+ (void **) &mem_info->mapped_logical_address);
+ if (ACPI_FAILURE (status)) {
+ ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Could not map memory at %8.8X%8.8X, size %X\n",
+ ACPI_FORMAT_UINT64 (address), (u32) window_size));
+ mem_info->mapped_length = 0;
+ return_ACPI_STATUS (status);
+ }
+
+ /* Save the physical address and mapping size */
+
+ mem_info->mapped_physical_address = address;
+ mem_info->mapped_length = window_size;
+ }
+
+ /*
+ * Generate a logical pointer corresponding to the address we want to
+ * access
+ */
+ logical_addr_ptr = mem_info->mapped_logical_address +
+ ((acpi_integer) address - (acpi_integer) mem_info->mapped_physical_address);
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+ "system_memory %d (%d width) Address=%8.8X%8.8X\n", function, bit_width,
+ ACPI_FORMAT_UINT64 (address)));
+
+ /*
+ * Perform the memory read or write
+ *
+ * Note: For machines that do not support non-aligned transfers, the target
+ * address was checked for alignment above. We do not attempt to break the
+ * transfer up into smaller (byte-size) chunks because the AML specifically
+ * asked for a transfer width that the hardware may require.
+ */
+ switch (function) {
+ case ACPI_READ:
+
+ *value = 0;
+ switch (bit_width) {
+ case 8:
+ *value = (acpi_integer) *((u8 *) logical_addr_ptr);
+ break;
+
+ case 16:
+ *value = (acpi_integer) *((u16 *) logical_addr_ptr);
+ break;
+
+ case 32:
+ *value = (acpi_integer) *((u32 *) logical_addr_ptr);
+ break;
+
+#if ACPI_MACHINE_WIDTH != 16
+ case 64:
+ *value = (acpi_integer) *((u64 *) logical_addr_ptr);
+ break;
+#endif
+ default:
+ /* bit_width was already validated */
+ break;
+ }
+ break;
+
+ case ACPI_WRITE:
+
+ switch (bit_width) {
+ case 8:
+ *(u8 *) logical_addr_ptr = (u8) *value;
+ break;
+
+ case 16:
+ *(u16 *) logical_addr_ptr = (u16) *value;
+ break;
+
+ case 32:
+ *(u32 *) logical_addr_ptr = (u32) *value;
+ break;
+
+#if ACPI_MACHINE_WIDTH != 16
+ case 64:
+ *(u64 *) logical_addr_ptr = (u64) *value;
+ break;
+#endif
+
+ default:
+ /* bit_width was already validated */
+ break;
+ }
+ break;
+
+ default:
+ status = AE_BAD_PARAMETER;
+ break;
+ }
+
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_system_io_space_handler
+ *
+ * PARAMETERS: Function - Read or Write operation
+ * Address - Where in the space to read or write
+ * bit_width - Field width in bits (8, 16, or 32)
+ * Value - Pointer to in or out value
+ * handler_context - Pointer to Handler's context
+ * region_context - Pointer to context specific to the
+ * accessed region
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Handler for the System IO address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_io_space_handler (
+ u32 function,
+ acpi_physical_address address,
+ u32 bit_width,
+ acpi_integer *value,
+ void *handler_context,
+ void *region_context)
+{
+ acpi_status status = AE_OK;
+ u32 value32;
+
+
+ ACPI_FUNCTION_TRACE ("ex_system_io_space_handler");
+
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+ "system_iO %d (%d width) Address=%8.8X%8.8X\n", function, bit_width,
+ ACPI_FORMAT_UINT64 (address)));
+
+ /* Decode the function parameter */
+
+ switch (function) {
+ case ACPI_READ:
+
+ status = acpi_os_read_port ((acpi_io_address) address, &value32, bit_width);
+ *value = value32;
+ break;
+
+ case ACPI_WRITE:
+
+ status = acpi_os_write_port ((acpi_io_address) address, (u32) *value, bit_width);
+ break;
+
+ default:
+ status = AE_BAD_PARAMETER;
+ break;
+ }
+
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_pci_config_space_handler
+ *
+ * PARAMETERS: Function - Read or Write operation
+ * Address - Where in the space to read or write
+ * bit_width - Field width in bits (8, 16, or 32)
+ * Value - Pointer to in or out value
+ * handler_context - Pointer to Handler's context
+ * region_context - Pointer to context specific to the
+ * accessed region
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Handler for the PCI Config address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_pci_config_space_handler (
+ u32 function,
+ acpi_physical_address address,
+ u32 bit_width,
+ acpi_integer *value,
+ void *handler_context,
+ void *region_context)
+{
+ acpi_status status = AE_OK;
+ struct acpi_pci_id *pci_id;
+ u16 pci_register;
+
+
+ ACPI_FUNCTION_TRACE ("ex_pci_config_space_handler");
+
+
+ /*
+ * The arguments to acpi_os(Read|Write)pci_configuration are:
+ *
+ * pci_segment is the PCI bus segment range 0-31
+ * pci_bus is the PCI bus number range 0-255
+ * pci_device is the PCI device number range 0-31
+ * pci_function is the PCI device function number
+ * pci_register is the Config space register range 0-255 bytes
+ *
+ * Value - input value for write, output address for read
+ *
+ */
+ pci_id = (struct acpi_pci_id *) region_context;
+ pci_register = (u16) (u32) address;
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+ "pci_config %d (%d) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
+ function, bit_width, pci_id->segment, pci_id->bus, pci_id->device,
+ pci_id->function, pci_register));
+
+ switch (function) {
+ case ACPI_READ:
+
+ *value = 0;
+ status = acpi_os_read_pci_configuration (pci_id, pci_register, value, bit_width);
+ break;
+
+ case ACPI_WRITE:
+
+ status = acpi_os_write_pci_configuration (pci_id, pci_register, *value, bit_width);
+ break;
+
+ default:
+
+ status = AE_BAD_PARAMETER;
+ break;
+ }
+
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_cmos_space_handler
+ *
+ * PARAMETERS: Function - Read or Write operation
+ * Address - Where in the space to read or write
+ * bit_width - Field width in bits (8, 16, or 32)
+ * Value - Pointer to in or out value
+ * handler_context - Pointer to Handler's context
+ * region_context - Pointer to context specific to the
+ * accessed region
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Handler for the CMOS address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_cmos_space_handler (
+ u32 function,
+ acpi_physical_address address,
+ u32 bit_width,
+ acpi_integer *value,
+ void *handler_context,
+ void *region_context)
+{
+ acpi_status status = AE_OK;
+
+
+ ACPI_FUNCTION_TRACE ("ex_cmos_space_handler");
+
+
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_pci_bar_space_handler
+ *
+ * PARAMETERS: Function - Read or Write operation
+ * Address - Where in the space to read or write
+ * bit_width - Field width in bits (8, 16, or 32)
+ * Value - Pointer to in or out value
+ * handler_context - Pointer to Handler's context
+ * region_context - Pointer to context specific to the
+ * accessed region
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Handler for the PCI bar_target address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_pci_bar_space_handler (
+ u32 function,
+ acpi_physical_address address,
+ u32 bit_width,
+ acpi_integer *value,
+ void *handler_context,
+ void *region_context)
+{
+ acpi_status status = AE_OK;
+
+
+ ACPI_FUNCTION_TRACE ("ex_pci_bar_space_handler");
+
+
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_data_table_space_handler
+ *
+ * PARAMETERS: Function - Read or Write operation
+ * Address - Where in the space to read or write
+ * bit_width - Field width in bits (8, 16, or 32)
+ * Value - Pointer to in or out value
+ * handler_context - Pointer to Handler's context
+ * region_context - Pointer to context specific to the
+ * accessed region
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Handler for the Data Table address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_data_table_space_handler (
+ u32 function,
+ acpi_physical_address address,
+ u32 bit_width,
+ acpi_integer *value,
+ void *handler_context,
+ void *region_context)
+{
+ acpi_status status = AE_OK;
+ u32 byte_width = ACPI_DIV_8 (bit_width);
+ u32 i;
+ char *logical_addr_ptr;
+
+
+ ACPI_FUNCTION_TRACE ("ex_data_table_space_handler");
+
+
+ logical_addr_ptr = ACPI_PHYSADDR_TO_PTR (address);
+
+
+ /* Perform the memory read or write */
+
+ switch (function) {
+ case ACPI_READ:
+
+ for (i = 0; i < byte_width; i++) {
+ ((char *) value) [i] = logical_addr_ptr[i];
+ }
+ break;
+
+ case ACPI_WRITE:
+ default:
+
+ return_ACPI_STATUS (AE_SUPPORT);
+ }
+
+ return_ACPI_STATUS (status);
+}
+
+