diff --git a/drivers/acpi/executer/Makefile b/drivers/acpi/executer/Makefile
new file mode 100644
index 0000000..e09998a
--- /dev/null
+++ b/drivers/acpi/executer/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for all Linux ACPI interpreter subdirectories
+#
+
+obj-y := exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
+	 exconvrt.o  exfldio.o  exoparg1.o  exprep.o    exresop.o   exsystem.o\
+	 excreate.o  exmisc.o   exoparg2.o  exregion.o  exstore.o   exutils.o \
+	 exdump.o    exmutex.o  exoparg3.o  exresnte.o  exstoren.o
+
+EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
new file mode 100644
index 0000000..ac3c061
--- /dev/null
+++ b/drivers/acpi/executer/exconfig.c
@@ -0,0 +1,487 @@
+/******************************************************************************
+ *
+ * Module Name: exconfig - Namespace reconfiguration (Load/Unload opcodes)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acevents.h>
+#include <acpi/actables.h>
+#include <acpi/acdispat.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exconfig")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_add_table
+ *
+ * PARAMETERS:  Table               - Pointer to raw table
+ *              parent_node         - Where to load the table (scope)
+ *              ddb_handle          - Where to return the table handle.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Common function to Install and Load an ACPI table with a
+ *              returned table handle.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_add_table (
+	struct acpi_table_header        *table,
+	struct acpi_namespace_node      *parent_node,
+	union acpi_operand_object       **ddb_handle)
+{
+	acpi_status                     status;
+	struct acpi_table_desc          table_info;
+	union acpi_operand_object       *obj_desc;
+
+
+	ACPI_FUNCTION_TRACE ("ex_add_table");
+
+
+	/* Create an object to be the table handle */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_LOCAL_REFERENCE);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Install the new table into the local data structures */
+
+	ACPI_MEMSET (&table_info, 0, sizeof (struct acpi_table_desc));
+
+	table_info.type        = ACPI_TABLE_SSDT;
+	table_info.pointer     = table;
+	table_info.length      = (acpi_size) table->length;
+	table_info.allocation  = ACPI_MEM_ALLOCATED;
+
+	status = acpi_tb_install_table (&table_info);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/* Add the table to the namespace */
+
+	status = acpi_ns_load_table (table_info.installed_desc, parent_node);
+	if (ACPI_FAILURE (status)) {
+		/* Uninstall table on error */
+
+		(void) acpi_tb_uninstall_table (table_info.installed_desc);
+		goto cleanup;
+	}
+
+	/* Init the table handle */
+
+	obj_desc->reference.opcode = AML_LOAD_OP;
+	obj_desc->reference.object = table_info.installed_desc;
+	*ddb_handle = obj_desc;
+	return_ACPI_STATUS (AE_OK);
+
+
+cleanup:
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_load_table_op
+ *
+ * PARAMETERS:  walk_state          - Current state with operands
+ *              return_desc         - Where to store the return object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Load an ACPI table
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_load_table_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       **return_desc)
+{
+	acpi_status                     status;
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	struct acpi_table_header        *table;
+	struct acpi_namespace_node      *parent_node;
+	struct acpi_namespace_node      *start_node;
+	struct acpi_namespace_node      *parameter_node = NULL;
+	union acpi_operand_object       *ddb_handle;
+
+
+	ACPI_FUNCTION_TRACE ("ex_load_table_op");
+
+
+#if 0
+	/*
+	 * Make sure that the signature does not match one of the tables that
+	 * is already loaded.
+	 */
+	status = acpi_tb_match_signature (operand[0]->string.pointer, NULL);
+	if (status == AE_OK) {
+		/* Signature matched -- don't allow override */
+
+		return_ACPI_STATUS (AE_ALREADY_EXISTS);
+	}
+#endif
+
+	/* Find the ACPI table */
+
+	status = acpi_tb_find_table (operand[0]->string.pointer,
+			   operand[1]->string.pointer,
+			   operand[2]->string.pointer, &table);
+	if (ACPI_FAILURE (status)) {
+		if (status != AE_NOT_FOUND) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* Table not found, return an Integer=0 and AE_OK */
+
+		ddb_handle = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!ddb_handle) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		ddb_handle->integer.value = 0;
+		*return_desc = ddb_handle;
+
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Default nodes */
+
+	start_node = walk_state->scope_info->scope.node;
+	parent_node = acpi_gbl_root_node;
+
+	/* root_path (optional parameter) */
+
+	if (operand[3]->string.length > 0) {
+		/*
+		 * Find the node referenced by the root_path_string. This is the
+		 * location within the namespace where the table will be loaded.
+		 */
+		status = acpi_ns_get_node_by_path (operand[3]->string.pointer, start_node,
+				   ACPI_NS_SEARCH_PARENT, &parent_node);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/* parameter_path (optional parameter) */
+
+	if (operand[4]->string.length > 0) {
+		if ((operand[4]->string.pointer[0] != '\\') &&
+			(operand[4]->string.pointer[0] != '^')) {
+			/*
+			 * Path is not absolute, so it will be relative to the node
+			 * referenced by the root_path_string (or the NS root if omitted)
+			 */
+			start_node = parent_node;
+		}
+
+		/*
+		 * Find the node referenced by the parameter_path_string
+		 */
+		status = acpi_ns_get_node_by_path (operand[4]->string.pointer, start_node,
+				   ACPI_NS_SEARCH_PARENT, &parameter_node);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/* Load the table into the namespace */
+
+	status = acpi_ex_add_table (table, parent_node, &ddb_handle);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Parameter Data (optional) */
+
+	if (parameter_node) {
+		/* Store the parameter data into the optional parameter object */
+
+		status = acpi_ex_store (operand[5], ACPI_CAST_PTR (union acpi_operand_object, parameter_node),
+				 walk_state);
+		if (ACPI_FAILURE (status)) {
+			(void) acpi_ex_unload_table (ddb_handle);
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	*return_desc = ddb_handle;
+	return_ACPI_STATUS  (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_load_op
+ *
+ * PARAMETERS:  obj_desc        - Region or Field where the table will be
+ *                                obtained
+ *              Target          - Where a handle to the table will be stored
+ *              walk_state      - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Load an ACPI table from a field or operation region
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_load_op (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       *target,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *ddb_handle;
+	union acpi_operand_object       *buffer_desc = NULL;
+	struct acpi_table_header        *table_ptr = NULL;
+	acpi_physical_address           address;
+	struct acpi_table_header        table_header;
+	u32                             i;
+
+	ACPI_FUNCTION_TRACE ("ex_load_op");
+
+
+	/* Object can be either an op_region or a Field */
+
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_REGION:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Load from Region %p %s\n",
+			obj_desc, acpi_ut_get_object_type_name (obj_desc)));
+
+		/*
+		 * If the Region Address and Length have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_region_arguments (obj_desc);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+
+		/* Get the base physical address of the region */
+
+		address = obj_desc->region.address;
+
+		/* Get the table length from the table header */
+
+		table_header.length = 0;
+		for (i = 0; i < 8; i++) {
+			status = acpi_ev_address_space_dispatch (obj_desc, ACPI_READ,
+					   (acpi_physical_address) (i + address), 8,
+					   ((u8 *) &table_header) + i);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+
+		/* Sanity check the table length */
+
+		if (table_header.length < sizeof (struct acpi_table_header)) {
+			return_ACPI_STATUS (AE_BAD_HEADER);
+		}
+
+		/* Allocate a buffer for the entire table */
+
+		table_ptr = ACPI_MEM_ALLOCATE (table_header.length);
+		if (!table_ptr) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Get the entire table from the op region */
+
+		for (i = 0; i < table_header.length; i++) {
+			status = acpi_ev_address_space_dispatch (obj_desc, ACPI_READ,
+					   (acpi_physical_address) (i + address), 8,
+					   ((u8 *) table_ptr + i));
+			if (ACPI_FAILURE (status)) {
+				goto cleanup;
+			}
+		}
+		break;
+
+
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Load from Field %p %s\n",
+			obj_desc, acpi_ut_get_object_type_name (obj_desc)));
+
+		/*
+		 * The length of the field must be at least as large as the table.
+		 * Read the entire field and thus the entire table.  Buffer is
+		 * allocated during the read.
+		 */
+		status = acpi_ex_read_data_from_field (walk_state, obj_desc, &buffer_desc);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		table_ptr = ACPI_CAST_PTR (struct acpi_table_header, buffer_desc->buffer.pointer);
+
+		 /* Sanity check the table length */
+
+		if (table_ptr->length < sizeof (struct acpi_table_header)) {
+			return_ACPI_STATUS (AE_BAD_HEADER);
+		}
+		break;
+
+
+	default:
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+	}
+
+	/* The table must be either an SSDT or a PSDT */
+
+	if ((!ACPI_STRNCMP (table_ptr->signature,
+			  acpi_gbl_table_data[ACPI_TABLE_PSDT].signature,
+			  acpi_gbl_table_data[ACPI_TABLE_PSDT].sig_length)) &&
+		(!ACPI_STRNCMP (table_ptr->signature,
+				 acpi_gbl_table_data[ACPI_TABLE_SSDT].signature,
+				 acpi_gbl_table_data[ACPI_TABLE_SSDT].sig_length))) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Table has invalid signature [%4.4s], must be SSDT or PSDT\n",
+			table_ptr->signature));
+		status = AE_BAD_SIGNATURE;
+		goto cleanup;
+	}
+
+	/* Install the new table into the local data structures */
+
+	status = acpi_ex_add_table (table_ptr, acpi_gbl_root_node, &ddb_handle);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/* Store the ddb_handle into the Target operand */
+
+	status = acpi_ex_store (ddb_handle, target, walk_state);
+	if (ACPI_FAILURE (status)) {
+		(void) acpi_ex_unload_table (ddb_handle);
+	}
+
+	return_ACPI_STATUS (status);
+
+
+cleanup:
+
+	if (buffer_desc) {
+		acpi_ut_remove_reference (buffer_desc);
+	}
+	else {
+		ACPI_MEM_FREE (table_ptr);
+	}
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_unload_table
+ *
+ * PARAMETERS:  ddb_handle          - Handle to a previously loaded table
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Unload an ACPI table
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_unload_table (
+	union acpi_operand_object       *ddb_handle)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *table_desc = ddb_handle;
+	struct acpi_table_desc          *table_info;
+
+
+	ACPI_FUNCTION_TRACE ("ex_unload_table");
+
+
+	/*
+	 * Validate the handle
+	 * Although the handle is partially validated in acpi_ex_reconfiguration(),
+	 * when it calls acpi_ex_resolve_operands(), the handle is more completely
+	 * validated here.
+	 */
+	if ((!ddb_handle) ||
+		(ACPI_GET_DESCRIPTOR_TYPE (ddb_handle) != ACPI_DESC_TYPE_OPERAND) ||
+		(ACPI_GET_OBJECT_TYPE (ddb_handle) != ACPI_TYPE_LOCAL_REFERENCE)) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* Get the actual table descriptor from the ddb_handle */
+
+	table_info = (struct acpi_table_desc *) table_desc->reference.object;
+
+	/*
+	 * Delete the entire namespace under this table Node
+	 * (Offset contains the table_id)
+	 */
+	acpi_ns_delete_namespace_by_owner (table_info->table_id);
+
+	/* Delete the table itself */
+
+	(void) acpi_tb_uninstall_table (table_info->installed_desc);
+
+	/* Delete the table descriptor (ddb_handle) */
+
+	acpi_ut_remove_reference (table_desc);
+	return_ACPI_STATUS (status);
+}
+
diff --git a/drivers/acpi/executer/exconvrt.c b/drivers/acpi/executer/exconvrt.c
new file mode 100644
index 0000000..df7ba12
--- /dev/null
+++ b/drivers/acpi/executer/exconvrt.c
@@ -0,0 +1,708 @@
+/******************************************************************************
+ *
+ * Module Name: exconvrt - Object conversion routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exconvrt")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_convert_to_integer
+ *
+ * PARAMETERS:  obj_desc        - Object to be converted.  Must be an
+ *                                Integer, Buffer, or String
+ *              result_desc     - Where the new Integer object is returned
+ *              Flags           - Used for string conversion
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Convert an ACPI Object to an integer.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_convert_to_integer (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc,
+	u32                             flags)
+{
+	union acpi_operand_object       *return_desc;
+	u8                              *pointer;
+	acpi_integer                    result;
+	u32                             i;
+	u32                             count;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_convert_to_integer", obj_desc);
+
+
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_INTEGER:
+
+		/* No conversion necessary */
+
+		*result_desc = obj_desc;
+		return_ACPI_STATUS (AE_OK);
+
+	case ACPI_TYPE_BUFFER:
+	case ACPI_TYPE_STRING:
+
+		/* Note: Takes advantage of common buffer/string fields */
+
+		pointer = obj_desc->buffer.pointer;
+		count   = obj_desc->buffer.length;
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_TYPE);
+	}
+
+	/*
+	 * Convert the buffer/string to an integer.  Note that both buffers and
+	 * strings are treated as raw data - we don't convert ascii to hex for
+	 * strings.
+	 *
+	 * There are two terminating conditions for the loop:
+	 * 1) The size of an integer has been reached, or
+	 * 2) The end of the buffer or string has been reached
+	 */
+	result = 0;
+
+	/*
+	 * String conversion is different than Buffer conversion
+	 */
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_STRING:
+
+		/*
+		 * Convert string to an integer - for most cases, the string must be
+		 * hexadecimal as per the ACPI specification.  The only exception (as
+		 * of ACPI 3.0) is that the to_integer() operator allows both decimal
+		 * and hexadecimal strings (hex prefixed with "0x").
+		 */
+		status = acpi_ut_strtoul64 ((char *) pointer, flags, &result);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+		break;
+
+
+	case ACPI_TYPE_BUFFER:
+
+		/* Check for zero-length buffer */
+
+		if (!count) {
+			return_ACPI_STATUS (AE_AML_BUFFER_LIMIT);
+		}
+
+		/* Transfer no more than an integer's worth of data */
+
+		if (count > acpi_gbl_integer_byte_width) {
+			count = acpi_gbl_integer_byte_width;
+		}
+
+		/*
+		 * Convert buffer to an integer - we simply grab enough raw data
+		 * from the buffer to fill an integer
+		 */
+		for (i = 0; i < count; i++) {
+			/*
+			 * Get next byte and shift it into the Result.
+			 * Little endian is used, meaning that the first byte of the buffer
+			 * is the LSB of the integer
+			 */
+			result |= (((acpi_integer) pointer[i]) << (i * 8));
+		}
+		break;
+
+
+	default:
+		/* No other types can get here */
+		break;
+	}
+
+	/*
+	 * Create a new integer
+	 */
+	return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+	if (!return_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Save the Result */
+
+	return_desc->integer.value = result;
+	acpi_ex_truncate_for32bit_table (return_desc);
+	*result_desc = return_desc;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_convert_to_buffer
+ *
+ * PARAMETERS:  obj_desc        - Object to be converted.  Must be an
+ *                                Integer, Buffer, or String
+ *              result_desc     - Where the new buffer object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Convert an ACPI Object to a Buffer
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_convert_to_buffer (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc)
+{
+	union acpi_operand_object       *return_desc;
+	u8                              *new_buf;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_convert_to_buffer", obj_desc);
+
+
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_BUFFER:
+
+		/* No conversion necessary */
+
+		*result_desc = obj_desc;
+		return_ACPI_STATUS (AE_OK);
+
+
+	case ACPI_TYPE_INTEGER:
+
+		/*
+		 * Create a new Buffer object.
+		 * Need enough space for one integer
+		 */
+		return_desc = acpi_ut_create_buffer_object (acpi_gbl_integer_byte_width);
+		if (!return_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Copy the integer to the buffer, LSB first */
+
+		new_buf = return_desc->buffer.pointer;
+		ACPI_MEMCPY (new_buf,
+				  &obj_desc->integer.value,
+				  acpi_gbl_integer_byte_width);
+		break;
+
+
+	case ACPI_TYPE_STRING:
+
+		/*
+		 * Create a new Buffer object
+		 * Size will be the string length
+		 *
+		 * NOTE: Add one to the string length to include the null terminator.
+		 * The ACPI spec is unclear on this subject, but there is existing
+		 * ASL/AML code that depends on the null being transferred to the new
+		 * buffer.
+		 */
+		return_desc = acpi_ut_create_buffer_object ((acpi_size) obj_desc->string.length + 1);
+		if (!return_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Copy the string to the buffer */
+
+		new_buf = return_desc->buffer.pointer;
+		ACPI_STRNCPY ((char *) new_buf, (char *) obj_desc->string.pointer,
+			obj_desc->string.length);
+		break;
+
+
+	default:
+		return_ACPI_STATUS (AE_TYPE);
+	}
+
+	/* Mark buffer initialized */
+
+	return_desc->common.flags |= AOPOBJ_DATA_VALID;
+	*result_desc = return_desc;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_convert_to_ascii
+ *
+ * PARAMETERS:  Integer         - Value to be converted
+ *              Base            - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
+ *              String          - Where the string is returned
+ *              data_width      - Size of data item to be converted, in bytes
+ *
+ * RETURN:      Actual string length
+ *
+ * DESCRIPTION: Convert an ACPI Integer to a hex or decimal string
+ *
+ ******************************************************************************/
+
+u32
+acpi_ex_convert_to_ascii (
+	acpi_integer                    integer,
+	u16                             base,
+	u8                              *string,
+	u8                              data_width)
+{
+	acpi_integer                    digit;
+	acpi_native_uint                i;
+	acpi_native_uint                j;
+	acpi_native_uint                k = 0;
+	acpi_native_uint                hex_length;
+	acpi_native_uint                decimal_length;
+	u32                             remainder;
+	u8                              supress_zeros;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	switch (base) {
+	case 10:
+
+		/* Setup max length for the decimal number */
+
+		switch (data_width) {
+		case 1:
+			decimal_length = ACPI_MAX8_DECIMAL_DIGITS;
+			break;
+
+		case 4:
+			decimal_length = ACPI_MAX32_DECIMAL_DIGITS;
+			break;
+
+		case 8:
+		default:
+			decimal_length = ACPI_MAX64_DECIMAL_DIGITS;
+			break;
+		}
+
+		supress_zeros = TRUE;    /* No leading zeros */
+		remainder = 0;
+
+		for (i = decimal_length; i > 0; i--) {
+			/* Divide by nth factor of 10 */
+
+			digit = integer;
+			for (j = 0; j < i; j++) {
+				(void) acpi_ut_short_divide (digit, 10, &digit, &remainder);
+			}
+
+			/* Handle leading zeros */
+
+			if (remainder != 0) {
+				supress_zeros = FALSE;
+			}
+
+			if (!supress_zeros) {
+				string[k] = (u8) (ACPI_ASCII_ZERO + remainder);
+				k++;
+			}
+		}
+		break;
+
+	case 16:
+
+		hex_length = ACPI_MUL_2 (data_width); /* 2 ascii hex chars per data byte */
+
+		for (i = 0, j = (hex_length-1); i < hex_length; i++, j--) {
+			/* Get one hex digit, most significant digits first */
+
+			string[k] = (u8) acpi_ut_hex_to_ascii_char (integer, ACPI_MUL_4 (j));
+			k++;
+		}
+		break;
+
+	default:
+		return (0);
+	}
+
+	/*
+	 * Since leading zeros are supressed, we must check for the case where
+	 * the integer equals 0
+	 *
+	 * Finally, null terminate the string and return the length
+	 */
+	if (!k) {
+		string [0] = ACPI_ASCII_ZERO;
+		k = 1;
+	}
+
+	string [k] = 0;
+	return ((u32) k);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_convert_to_string
+ *
+ * PARAMETERS:  obj_desc        - Object to be converted.  Must be an
+ *                                Integer, Buffer, or String
+ *              result_desc     - Where the string object is returned
+ *              Type            - String flags (base and conversion type)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Convert an ACPI Object to a string
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_convert_to_string (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc,
+	u32                             type)
+{
+	union acpi_operand_object       *return_desc;
+	u8                              *new_buf;
+	u32                             i;
+	u32                             string_length = 0;
+	u16                             base = 16;
+	u8                              separator = ',';
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_convert_to_string", obj_desc);
+
+
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_STRING:
+
+		/* No conversion necessary */
+
+		*result_desc = obj_desc;
+		return_ACPI_STATUS (AE_OK);
+
+
+	case ACPI_TYPE_INTEGER:
+
+		switch (type) {
+		case ACPI_EXPLICIT_CONVERT_DECIMAL:
+
+			/* Make room for maximum decimal number */
+
+			string_length = ACPI_MAX_DECIMAL_DIGITS;
+			base = 10;
+			break;
+
+		default:
+
+			/* Two hex string characters for each integer byte */
+
+			string_length = ACPI_MUL_2 (acpi_gbl_integer_byte_width);
+			break;
+		}
+
+		/*
+		 * Create a new String
+		 * Need enough space for one ASCII integer (plus null terminator)
+		 */
+		return_desc = acpi_ut_create_string_object ((acpi_size) string_length);
+		if (!return_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		new_buf = return_desc->buffer.pointer;
+
+		/* Convert integer to string */
+
+		string_length = acpi_ex_convert_to_ascii (obj_desc->integer.value, base,
+				   new_buf, acpi_gbl_integer_byte_width);
+
+		/* Null terminate at the correct place */
+
+		return_desc->string.length = string_length;
+		new_buf [string_length] = 0;
+		break;
+
+
+	case ACPI_TYPE_BUFFER:
+
+		/* Setup string length, base, and separator */
+
+		switch (type) {
+		case ACPI_EXPLICIT_CONVERT_DECIMAL: /* Used by to_decimal_string operator */
+			/*
+			 * From ACPI: "If Data is a buffer, it is converted to a string of
+			 * decimal values separated by commas."
+			 */
+			base = 10;
+
+			/*
+			 * Calculate the final string length.  Individual string values
+			 * are variable length (include separator for each)
+			 */
+			for (i = 0; i < obj_desc->buffer.length; i++) {
+				if (obj_desc->buffer.pointer[i] >= 100) {
+					string_length += 4;
+				}
+				else if (obj_desc->buffer.pointer[i] >= 10) {
+					string_length += 3;
+				}
+				else {
+					string_length += 2;
+				}
+			}
+			break;
+
+		case ACPI_IMPLICIT_CONVERT_HEX:
+			/*
+			 * From the ACPI spec:
+			 *"The entire contents of the buffer are converted to a string of
+			 * two-character hexadecimal numbers, each separated by a space."
+			 */
+			separator = ' ';
+			string_length = (obj_desc->buffer.length * 3);
+			break;
+
+		case ACPI_EXPLICIT_CONVERT_HEX:     /* Used by to_hex_string operator */
+			/*
+			 * From ACPI: "If Data is a buffer, it is converted to a string of
+			 * hexadecimal values separated by commas."
+			 */
+			string_length = (obj_desc->buffer.length * 3);
+			break;
+
+		default:
+			return_ACPI_STATUS (AE_BAD_PARAMETER);
+		}
+
+		/*
+		 * Perform the conversion.
+		 * (-1 because of extra separator included in string_length from above)
+		 */
+		string_length--;
+		if (string_length > ACPI_MAX_STRING_CONVERSION) /* ACPI limit */ {
+			return_ACPI_STATUS (AE_AML_STRING_LIMIT);
+		}
+
+		/*
+		 * Create a new string object and string buffer
+		 */
+		return_desc = acpi_ut_create_string_object ((acpi_size) string_length);
+		if (!return_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		new_buf = return_desc->buffer.pointer;
+
+		/*
+		 * Convert buffer bytes to hex or decimal values
+		 * (separated by commas or spaces)
+		 */
+		for (i = 0; i < obj_desc->buffer.length; i++) {
+			new_buf += acpi_ex_convert_to_ascii (
+					 (acpi_integer) obj_desc->buffer.pointer[i], base,
+					 new_buf, 1);
+			*new_buf++ = separator; /* each separated by a comma or space */
+		}
+
+		/* Null terminate the string (overwrites final comma/space from above) */
+
+		new_buf--;
+		*new_buf = 0;
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_TYPE);
+	}
+
+	*result_desc = return_desc;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_convert_to_target_type
+ *
+ * PARAMETERS:  destination_type    - Current type of the destination
+ *              source_desc         - Source object to be converted.
+ *              result_desc         - Where the converted object is returned
+ *              walk_state          - Current method state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Implements "implicit conversion" rules for storing an object.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_convert_to_target_type (
+	acpi_object_type                destination_type,
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       **result_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_convert_to_target_type");
+
+
+	/* Default behavior */
+
+	*result_desc = source_desc;
+
+	/*
+	 * If required by the target,
+	 * perform implicit conversion on the source before we store it.
+	 */
+	switch (GET_CURRENT_ARG_TYPE (walk_state->op_info->runtime_args)) {
+	case ARGI_SIMPLE_TARGET:
+	case ARGI_FIXED_TARGET:
+	case ARGI_INTEGER_REF:      /* Handles Increment, Decrement cases */
+
+		switch (destination_type) {
+		case ACPI_TYPE_LOCAL_REGION_FIELD:
+			/*
+			 * Named field can always handle conversions
+			 */
+			break;
+
+		default:
+			/* No conversion allowed for these types */
+
+			if (destination_type != ACPI_GET_OBJECT_TYPE (source_desc)) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+					"Explicit operator, will store (%s) over existing type (%s)\n",
+					acpi_ut_get_object_type_name (source_desc),
+					acpi_ut_get_type_name (destination_type)));
+				status = AE_TYPE;
+			}
+		}
+		break;
+
+
+	case ARGI_TARGETREF:
+
+		switch (destination_type) {
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_BUFFER_FIELD:
+		case ACPI_TYPE_LOCAL_BANK_FIELD:
+		case ACPI_TYPE_LOCAL_INDEX_FIELD:
+			/*
+			 * These types require an Integer operand.  We can convert
+			 * a Buffer or a String to an Integer if necessary.
+			 */
+			status = acpi_ex_convert_to_integer (source_desc, result_desc,
+					 16);
+			break;
+
+
+		case ACPI_TYPE_STRING:
+
+			/*
+			 * The operand must be a String.  We can convert an
+			 * Integer or Buffer if necessary
+			 */
+			status = acpi_ex_convert_to_string (source_desc, result_desc,
+					 ACPI_IMPLICIT_CONVERT_HEX);
+			break;
+
+
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * The operand must be a Buffer.  We can convert an
+			 * Integer or String if necessary
+			 */
+			status = acpi_ex_convert_to_buffer (source_desc, result_desc);
+			break;
+
+
+		default:
+			ACPI_REPORT_ERROR (("Bad destination type during conversion: %X\n",
+				destination_type));
+			status = AE_AML_INTERNAL;
+			break;
+		}
+		break;
+
+
+	case ARGI_REFERENCE:
+		/*
+		 * create_xxxx_field cases - we are storing the field object into the name
+		 */
+		break;
+
+
+	default:
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Unknown Target type ID 0x%X Op %s dest_type %s\n",
+			GET_CURRENT_ARG_TYPE (walk_state->op_info->runtime_args),
+			walk_state->op_info->name, acpi_ut_get_type_name (destination_type)));
+
+		ACPI_REPORT_ERROR (("Bad Target Type (ARGI): %X\n",
+			GET_CURRENT_ARG_TYPE (walk_state->op_info->runtime_args)))
+		status = AE_AML_INTERNAL;
+	}
+
+	/*
+	 * Source-to-Target conversion semantics:
+	 *
+	 * If conversion to the target type cannot be performed, then simply
+	 * overwrite the target with the new object and type.
+	 */
+	if (status == AE_TYPE) {
+		status = AE_OK;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/excreate.c b/drivers/acpi/executer/excreate.c
new file mode 100644
index 0000000..d94c260
--- /dev/null
+++ b/drivers/acpi/executer/excreate.c
@@ -0,0 +1,646 @@
+/******************************************************************************
+ *
+ * Module Name: excreate - Named object creation
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acevents.h>
+#include <acpi/actables.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("excreate")
+
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_alias
+ *
+ * PARAMETERS:  walk_state           - Current state, contains operands
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new named alias
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_alias (
+	struct acpi_walk_state          *walk_state)
+{
+	struct acpi_namespace_node      *target_node;
+	struct acpi_namespace_node      *alias_node;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_create_alias");
+
+
+	/* Get the source/alias operands (both namespace nodes) */
+
+	alias_node = (struct acpi_namespace_node *) walk_state->operands[0];
+	target_node = (struct acpi_namespace_node *) walk_state->operands[1];
+
+	if ((target_node->type == ACPI_TYPE_LOCAL_ALIAS) ||
+		(target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
+		/*
+		 * Dereference an existing alias so that we don't create a chain
+		 * of aliases.  With this code, we guarantee that an alias is
+		 * always exactly one level of indirection away from the
+		 * actual aliased name.
+		 */
+		target_node = ACPI_CAST_PTR (struct acpi_namespace_node, target_node->object);
+	}
+
+	/*
+	 * For objects that can never change (i.e., the NS node will
+	 * permanently point to the same object), we can simply attach
+	 * the object to the new NS node.  For other objects (such as
+	 * Integers, buffers, etc.), we have to point the Alias node
+	 * to the original Node.
+	 */
+	switch (target_node->type) {
+	case ACPI_TYPE_INTEGER:
+	case ACPI_TYPE_STRING:
+	case ACPI_TYPE_BUFFER:
+	case ACPI_TYPE_PACKAGE:
+	case ACPI_TYPE_BUFFER_FIELD:
+
+		/*
+		 * The new alias has the type ALIAS and points to the original
+		 * NS node, not the object itself.  This is because for these
+		 * types, the object can change dynamically via a Store.
+		 */
+		alias_node->type = ACPI_TYPE_LOCAL_ALIAS;
+		alias_node->object = ACPI_CAST_PTR (union acpi_operand_object, target_node);
+		break;
+
+	case ACPI_TYPE_METHOD:
+
+		/*
+		 * The new alias has the type ALIAS and points to the original
+		 * NS node, not the object itself.  This is because for these
+		 * types, the object can change dynamically via a Store.
+		 */
+		alias_node->type = ACPI_TYPE_LOCAL_METHOD_ALIAS;
+		alias_node->object = ACPI_CAST_PTR (union acpi_operand_object, target_node);
+		break;
+
+	default:
+
+		/* Attach the original source object to the new Alias Node */
+
+		/*
+		 * The new alias assumes the type of the target, and it points
+		 * to the same object.  The reference count of the object has an
+		 * additional reference to prevent deletion out from under either the
+		 * target node or the alias Node
+		 */
+		status = acpi_ns_attach_object (alias_node,
+				 acpi_ns_get_attached_object (target_node),
+				 target_node->type);
+		break;
+	}
+
+	/* Since both operands are Nodes, we don't need to delete them */
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_event
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new event object
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_event (
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+
+
+	ACPI_FUNCTION_TRACE ("ex_create_event");
+
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_EVENT);
+	if (!obj_desc) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/*
+	 * Create the actual OS semaphore, with zero initial units -- meaning
+	 * that the event is created in an unsignalled state
+	 */
+	status = acpi_os_create_semaphore (ACPI_NO_UNIT_LIMIT, 0,
+			   &obj_desc->event.semaphore);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/* Attach object to the Node */
+
+	status = acpi_ns_attach_object ((struct acpi_namespace_node *) walk_state->operands[0],
+			   obj_desc, ACPI_TYPE_EVENT);
+
+cleanup:
+	/*
+	 * Remove local reference to the object (on error, will cause deletion
+	 * of both object and semaphore if present.)
+	 */
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_mutex
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new mutex object
+ *
+ *              Mutex (Name[0], sync_level[1])
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_mutex (
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *obj_desc;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_create_mutex", ACPI_WALK_OPERANDS);
+
+
+	/* Create the new mutex object */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_MUTEX);
+	if (!obj_desc) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/*
+	 * Create the actual OS semaphore.
+	 * One unit max to make it a mutex, with one initial unit to allow
+	 * the mutex to be acquired.
+	 */
+	status = acpi_os_create_semaphore (1, 1, &obj_desc->mutex.semaphore);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/* Init object and attach to NS node */
+
+	obj_desc->mutex.sync_level = (u8) walk_state->operands[1]->integer.value;
+	obj_desc->mutex.node = (struct acpi_namespace_node *) walk_state->operands[0];
+
+	status = acpi_ns_attach_object (obj_desc->mutex.node,
+			 obj_desc, ACPI_TYPE_MUTEX);
+
+
+cleanup:
+	/*
+	 * Remove local reference to the object (on error, will cause deletion
+	 * of both object and semaphore if present.)
+	 */
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_region
+ *
+ * PARAMETERS:  aml_start           - Pointer to the region declaration AML
+ *              aml_length          - Max length of the declaration AML
+ *              Operands            - List of operands for the opcode
+ *              walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new operation region object
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_region (
+	u8                              *aml_start,
+	u32                             aml_length,
+	u8                              region_space,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+	struct acpi_namespace_node      *node;
+	union acpi_operand_object       *region_obj2;
+
+
+	ACPI_FUNCTION_TRACE ("ex_create_region");
+
+
+	/* Get the Namespace Node */
+
+	node = walk_state->op->common.node;
+
+	/*
+	 * If the region object is already attached to this node,
+	 * just return
+	 */
+	if (acpi_ns_get_attached_object (node)) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/*
+	 * Space ID must be one of the predefined IDs, or in the user-defined
+	 * range
+	 */
+	if ((region_space >= ACPI_NUM_PREDEFINED_REGIONS) &&
+		(region_space < ACPI_USER_REGION_BEGIN)) {
+		ACPI_REPORT_ERROR (("Invalid address_space type %X\n", region_space));
+		return_ACPI_STATUS (AE_AML_INVALID_SPACE_ID);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "Region Type - %s (%X)\n",
+			  acpi_ut_get_region_name (region_space), region_space));
+
+	/* Create the region descriptor */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_REGION);
+	if (!obj_desc) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/*
+	 * Remember location in AML stream of address & length
+	 * operands since they need to be evaluated at run time.
+	 */
+	region_obj2                 = obj_desc->common.next_object;
+	region_obj2->extra.aml_start = aml_start;
+	region_obj2->extra.aml_length = aml_length;
+
+	/* Init the region from the operands */
+
+	obj_desc->region.space_id = region_space;
+	obj_desc->region.address = 0;
+	obj_desc->region.length = 0;
+	obj_desc->region.node   = node;
+
+	/* Install the new region object in the parent Node */
+
+	status = acpi_ns_attach_object (node, obj_desc, ACPI_TYPE_REGION);
+
+
+cleanup:
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_table_region
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new data_table_region object
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_table_region (
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *obj_desc;
+	struct acpi_namespace_node      *node;
+	struct acpi_table_header        *table;
+	union acpi_operand_object       *region_obj2;
+
+
+	ACPI_FUNCTION_TRACE ("ex_create_table_region");
+
+
+	/* Get the Node from the object stack  */
+
+	node = walk_state->op->common.node;
+
+	/*
+	 * If the region object is already attached to this node,
+	 * just return
+	 */
+	if (acpi_ns_get_attached_object (node)) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Find the ACPI table */
+
+	status = acpi_tb_find_table (operand[1]->string.pointer,
+			   operand[2]->string.pointer,
+			   operand[3]->string.pointer, &table);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Create the region descriptor */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_REGION);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	region_obj2                     = obj_desc->common.next_object;
+	region_obj2->extra.region_context = NULL;
+
+	/* Init the region from the operands */
+
+	obj_desc->region.space_id = REGION_DATA_TABLE;
+	obj_desc->region.address = (acpi_physical_address) ACPI_TO_INTEGER (table);
+	obj_desc->region.length = table->length;
+	obj_desc->region.node   = node;
+	obj_desc->region.flags  = AOPOBJ_DATA_VALID;
+
+	/* Install the new region object in the parent Node */
+
+	status = acpi_ns_attach_object (node, obj_desc, ACPI_TYPE_REGION);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	status = acpi_ev_initialize_region (obj_desc, FALSE);
+	if (ACPI_FAILURE (status)) {
+		if (status == AE_NOT_EXIST) {
+			status = AE_OK;
+		}
+		else {
+			goto cleanup;
+		}
+	}
+
+	obj_desc->region.flags |= AOPOBJ_SETUP_COMPLETE;
+
+
+cleanup:
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_processor
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new processor object and populate the fields
+ *
+ *              Processor (Name[0], cpu_iD[1], pblock_addr[2], pblock_length[3])
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_processor (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_create_processor", walk_state);
+
+
+	/* Create the processor object */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_PROCESSOR);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/*
+	 * Initialize the processor object from the operands
+	 */
+	obj_desc->processor.proc_id = (u8)          operand[1]->integer.value;
+	obj_desc->processor.address = (acpi_io_address) operand[2]->integer.value;
+	obj_desc->processor.length = (u8)           operand[3]->integer.value;
+
+	/* Install the processor object in the parent Node */
+
+	status = acpi_ns_attach_object ((struct acpi_namespace_node *) operand[0],
+			  obj_desc, ACPI_TYPE_PROCESSOR);
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_power_resource
+ *
+ * PARAMETERS:  walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new power_resource object and populate the fields
+ *
+ *              power_resource (Name[0], system_level[1], resource_order[2])
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_power_resource (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	acpi_status                     status;
+	union acpi_operand_object       *obj_desc;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_create_power_resource", walk_state);
+
+
+	/* Create the power resource object */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_POWER);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Initialize the power object from the operands */
+
+	obj_desc->power_resource.system_level = (u8) operand[1]->integer.value;
+	obj_desc->power_resource.resource_order = (u16) operand[2]->integer.value;
+
+	/* Install the  power resource object in the parent Node */
+
+	status = acpi_ns_attach_object ((struct acpi_namespace_node *) operand[0],
+			  obj_desc, ACPI_TYPE_POWER);
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+#endif
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_create_method
+ *
+ * PARAMETERS:  aml_start       - First byte of the method's AML
+ *              aml_length      - AML byte count for this method
+ *              walk_state      - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a new method object
+ *
+ ****************************************************************************/
+
+acpi_status
+acpi_ex_create_method (
+	u8                              *aml_start,
+	u32                             aml_length,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+	u8                              method_flags;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_create_method", walk_state);
+
+
+	/* Create a new method object */
+
+	obj_desc = acpi_ut_create_internal_object (ACPI_TYPE_METHOD);
+	if (!obj_desc) {
+	   return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Save the method's AML pointer and length  */
+
+	obj_desc->method.aml_start = aml_start;
+	obj_desc->method.aml_length = aml_length;
+
+	/*
+	 * Disassemble the method flags.  Split off the Arg Count
+	 * for efficiency
+	 */
+	method_flags = (u8) operand[1]->integer.value;
+
+	obj_desc->method.method_flags = (u8) (method_flags & ~AML_METHOD_ARG_COUNT);
+	obj_desc->method.param_count = (u8) (method_flags & AML_METHOD_ARG_COUNT);
+
+	/*
+	 * Get the concurrency count.  If required, a semaphore will be
+	 * created for this method when it is parsed.
+	 */
+	if (acpi_gbl_all_methods_serialized) {
+		obj_desc->method.concurrency = 1;
+		obj_desc->method.method_flags |= AML_METHOD_SERIALIZED;
+	}
+	else if (method_flags & AML_METHOD_SERIALIZED) {
+		/*
+		 * ACPI 1.0: Concurrency = 1
+		 * ACPI 2.0: Concurrency = (sync_level (in method declaration) + 1)
+		 */
+		obj_desc->method.concurrency = (u8)
+				  (((method_flags & AML_METHOD_SYNCH_LEVEL) >> 4) + 1);
+	}
+	else {
+		obj_desc->method.concurrency = ACPI_INFINITE_CONCURRENCY;
+	}
+
+	/* Attach the new object to the method Node */
+
+	status = acpi_ns_attach_object ((struct acpi_namespace_node *) operand[0],
+			  obj_desc, ACPI_TYPE_METHOD);
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+
+	/* Remove a reference to the operand */
+
+	acpi_ut_remove_reference (operand[1]);
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c
new file mode 100644
index 0000000..e2f7c32
--- /dev/null
+++ b/drivers/acpi/executer/exdump.c
@@ -0,0 +1,793 @@
+/******************************************************************************
+ *
+ * Module Name: exdump - Interpreter debug output routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acparser.h>
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exdump")
+
+
+/*
+ * The following routines are used for debug output only
+ */
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_dump_operand
+ *
+ * PARAMETERS:  *obj_desc         - Pointer to entry to be dumped
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Dump an operand object
+ *
+ ****************************************************************************/
+
+void
+acpi_ex_dump_operand (
+	union acpi_operand_object       *obj_desc,
+	u32                             depth)
+{
+	u32                             length;
+	u32                             index;
+
+
+	ACPI_FUNCTION_NAME ("ex_dump_operand")
+
+
+	if (!((ACPI_LV_EXEC & acpi_dbg_level) && (_COMPONENT & acpi_dbg_layer))) {
+		return;
+	}
+
+	if (!obj_desc) {
+		/*
+		 * This could be a null element of a package
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Null Object Descriptor\n"));
+		return;
+	}
+
+	if (ACPI_GET_DESCRIPTOR_TYPE (obj_desc) == ACPI_DESC_TYPE_NAMED) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%p is a NS Node: ", obj_desc));
+		ACPI_DUMP_ENTRY (obj_desc, ACPI_LV_EXEC);
+		return;
+	}
+
+	if (ACPI_GET_DESCRIPTOR_TYPE (obj_desc) != ACPI_DESC_TYPE_OPERAND) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+			"%p is not a node or operand object: [%s]\n",
+			obj_desc, acpi_ut_get_descriptor_name (obj_desc)));
+		ACPI_DUMP_BUFFER (obj_desc, sizeof (union acpi_operand_object));
+		return;
+	}
+
+	/* obj_desc is a valid object */
+
+	if (depth > 0) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%*s[%u] %p ",
+			depth, " ", depth, obj_desc));
+	}
+	else {
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%p ", obj_desc));
+	}
+
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_LOCAL_REFERENCE:
+
+		switch (obj_desc->reference.opcode) {
+		case AML_DEBUG_OP:
+
+			acpi_os_printf ("Reference: Debug\n");
+			break;
+
+
+		case AML_NAME_OP:
+
+			ACPI_DUMP_PATHNAME (obj_desc->reference.object,
+				"Reference: Name: ", ACPI_LV_INFO, _COMPONENT);
+			ACPI_DUMP_ENTRY (obj_desc->reference.object, ACPI_LV_INFO);
+			break;
+
+
+		case AML_INDEX_OP:
+
+			acpi_os_printf ("Reference: Index %p\n",
+				obj_desc->reference.object);
+			break;
+
+
+		case AML_REF_OF_OP:
+
+			acpi_os_printf ("Reference: (ref_of) %p\n",
+				obj_desc->reference.object);
+			break;
+
+
+		case AML_ARG_OP:
+
+			acpi_os_printf ("Reference: Arg%d",
+				obj_desc->reference.offset);
+
+			if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
+				/* Value is an Integer */
+
+				acpi_os_printf (" value is [%8.8X%8.8x]",
+					ACPI_FORMAT_UINT64 (obj_desc->integer.value));
+			}
+
+			acpi_os_printf ("\n");
+			break;
+
+
+		case AML_LOCAL_OP:
+
+			acpi_os_printf ("Reference: Local%d",
+				obj_desc->reference.offset);
+
+			if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
+
+				/* Value is an Integer */
+
+				acpi_os_printf (" value is [%8.8X%8.8x]",
+					ACPI_FORMAT_UINT64 (obj_desc->integer.value));
+			}
+
+			acpi_os_printf ("\n");
+			break;
+
+
+		case AML_INT_NAMEPATH_OP:
+
+			acpi_os_printf ("Reference.Node->Name %X\n",
+				obj_desc->reference.node->name.integer);
+			break;
+
+
+		default:
+
+			/* Unknown opcode */
+
+			acpi_os_printf ("Unknown Reference opcode=%X\n",
+				obj_desc->reference.opcode);
+			break;
+
+		}
+		break;
+
+
+	case ACPI_TYPE_BUFFER:
+
+		acpi_os_printf ("Buffer len %X @ %p \n",
+			obj_desc->buffer.length, obj_desc->buffer.pointer);
+
+		length = obj_desc->buffer.length;
+		if (length > 64) {
+			length = 64;
+		}
+
+		/* Debug only -- dump the buffer contents */
+
+		if (obj_desc->buffer.pointer) {
+			acpi_os_printf ("Buffer Contents: ");
+
+			for (index = 0; index < length; index++) {
+				acpi_os_printf (" %02x", obj_desc->buffer.pointer[index]);
+			}
+			acpi_os_printf ("\n");
+		}
+		break;
+
+
+	case ACPI_TYPE_INTEGER:
+
+		acpi_os_printf ("Integer %8.8X%8.8X\n",
+			ACPI_FORMAT_UINT64 (obj_desc->integer.value));
+		break;
+
+
+	case ACPI_TYPE_PACKAGE:
+
+		acpi_os_printf ("Package [Len %X] element_array %p\n",
+			obj_desc->package.count, obj_desc->package.elements);
+
+		/*
+		 * If elements exist, package element pointer is valid,
+		 * and debug_level exceeds 1, dump package's elements.
+		 */
+		if (obj_desc->package.count &&
+			obj_desc->package.elements &&
+			acpi_dbg_level > 1) {
+			for (index = 0; index < obj_desc->package.count; index++) {
+				acpi_ex_dump_operand (obj_desc->package.elements[index], depth+1);
+			}
+		}
+		break;
+
+
+	case ACPI_TYPE_REGION:
+
+		acpi_os_printf ("Region %s (%X)",
+			acpi_ut_get_region_name (obj_desc->region.space_id),
+			obj_desc->region.space_id);
+
+		/*
+		 * If the address and length have not been evaluated,
+		 * don't print them.
+		 */
+		if (!(obj_desc->region.flags & AOPOBJ_DATA_VALID)) {
+			acpi_os_printf ("\n");
+		}
+		else {
+			acpi_os_printf (" base %8.8X%8.8X Length %X\n",
+				ACPI_FORMAT_UINT64 (obj_desc->region.address),
+				obj_desc->region.length);
+		}
+		break;
+
+
+	case ACPI_TYPE_STRING:
+
+		acpi_os_printf ("String length %X @ %p ",
+			obj_desc->string.length, obj_desc->string.pointer);
+		acpi_ut_print_string (obj_desc->string.pointer, ACPI_UINT8_MAX);
+		acpi_os_printf ("\n");
+		break;
+
+
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+
+		acpi_os_printf ("bank_field\n");
+		break;
+
+
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+
+		acpi_os_printf (
+			"region_field: Bits=%X acc_width=%X Lock=%X Update=%X at byte=%X bit=%X of below:\n",
+			obj_desc->field.bit_length, obj_desc->field.access_byte_width,
+			obj_desc->field.field_flags & AML_FIELD_LOCK_RULE_MASK,
+			obj_desc->field.field_flags & AML_FIELD_UPDATE_RULE_MASK,
+			obj_desc->field.base_byte_offset, obj_desc->field.start_field_bit_offset);
+		acpi_ex_dump_operand (obj_desc->field.region_obj, depth+1);
+		break;
+
+
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		acpi_os_printf ("index_field\n");
+		break;
+
+
+	case ACPI_TYPE_BUFFER_FIELD:
+
+		acpi_os_printf (
+			"buffer_field: %X bits at byte %X bit %X of \n",
+			obj_desc->buffer_field.bit_length, obj_desc->buffer_field.base_byte_offset,
+			obj_desc->buffer_field.start_field_bit_offset);
+
+		if (!obj_desc->buffer_field.buffer_obj) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "*NULL* \n"));
+		}
+		else if (ACPI_GET_OBJECT_TYPE (obj_desc->buffer_field.buffer_obj) != ACPI_TYPE_BUFFER) {
+			acpi_os_printf ("*not a Buffer* \n");
+		}
+		else {
+			acpi_ex_dump_operand (obj_desc->buffer_field.buffer_obj, depth+1);
+		}
+		break;
+
+
+	case ACPI_TYPE_EVENT:
+
+		acpi_os_printf ("Event\n");
+		break;
+
+
+	case ACPI_TYPE_METHOD:
+
+		acpi_os_printf (
+			"Method(%X) @ %p:%X\n",
+			obj_desc->method.param_count,
+			obj_desc->method.aml_start, obj_desc->method.aml_length);
+		break;
+
+
+	case ACPI_TYPE_MUTEX:
+
+		acpi_os_printf ("Mutex\n");
+		break;
+
+
+	case ACPI_TYPE_DEVICE:
+
+		acpi_os_printf ("Device\n");
+		break;
+
+
+	case ACPI_TYPE_POWER:
+
+		acpi_os_printf ("Power\n");
+		break;
+
+
+	case ACPI_TYPE_PROCESSOR:
+
+		acpi_os_printf ("Processor\n");
+		break;
+
+
+	case ACPI_TYPE_THERMAL:
+
+		acpi_os_printf ("Thermal\n");
+		break;
+
+
+	default:
+		/* Unknown Type */
+
+		acpi_os_printf ("Unknown Type %X\n", ACPI_GET_OBJECT_TYPE (obj_desc));
+		break;
+	}
+
+	return;
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_dump_operands
+ *
+ * PARAMETERS:  Operands            - Operand list
+ *              interpreter_mode    - Load or Exec
+ *              Ident               - Identification
+ *              num_levels          - # of stack entries to dump above line
+ *              Note                - Output notation
+ *              module_name         - Caller's module name
+ *              line_number         - Caller's invocation line number
+ *
+ * DESCRIPTION: Dump the object stack
+ *
+ ****************************************************************************/
+
+void
+acpi_ex_dump_operands (
+	union acpi_operand_object       **operands,
+	acpi_interpreter_mode           interpreter_mode,
+	char                            *ident,
+	u32                             num_levels,
+	char                            *note,
+	char                            *module_name,
+	u32                             line_number)
+{
+	acpi_native_uint                i;
+
+
+	ACPI_FUNCTION_NAME ("ex_dump_operands");
+
+
+	if (!ident) {
+		ident = "?";
+	}
+
+	if (!note) {
+		note = "?";
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"************* Operand Stack Contents (Opcode [%s], %d Operands)\n",
+		ident, num_levels));
+
+	if (num_levels == 0) {
+		num_levels = 1;
+	}
+
+	/* Dump the operand stack starting at the top */
+
+	for (i = 0; num_levels > 0; i--, num_levels--) {
+		acpi_ex_dump_operand (operands[i], 0);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+		"************* Stack dump from %s(%d), %s\n",
+		module_name, line_number, note));
+	return;
+}
+
+
+#ifdef ACPI_FUTURE_USAGE
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_out*
+ *
+ * PARAMETERS:  Title               - Descriptive text
+ *              Value               - Value to be displayed
+ *
+ * DESCRIPTION: Object dump output formatting functions.  These functions
+ *              reduce the number of format strings required and keeps them
+ *              all in one place for easy modification.
+ *
+ ****************************************************************************/
+
+void
+acpi_ex_out_string (
+	char                            *title,
+	char                            *value)
+{
+	acpi_os_printf ("%20s : %s\n", title, value);
+}
+
+void
+acpi_ex_out_pointer (
+	char                            *title,
+	void                            *value)
+{
+	acpi_os_printf ("%20s : %p\n", title, value);
+}
+
+void
+acpi_ex_out_integer (
+	char                            *title,
+	u32                             value)
+{
+	acpi_os_printf ("%20s : %X\n", title, value);
+}
+
+void
+acpi_ex_out_address (
+	char                            *title,
+	acpi_physical_address           value)
+{
+
+#if ACPI_MACHINE_WIDTH == 16
+	acpi_os_printf ("%20s : %p\n", title, value);
+#else
+	acpi_os_printf ("%20s : %8.8X%8.8X\n", title, ACPI_FORMAT_UINT64 (value));
+#endif
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_dump_node
+ *
+ * PARAMETERS:  *Node               - Descriptor to dump
+ *              Flags               - Force display
+ *
+ * DESCRIPTION: Dumps the members of the given.Node
+ *
+ ****************************************************************************/
+
+void
+acpi_ex_dump_node (
+	struct acpi_namespace_node      *node,
+	u32                             flags)
+{
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	if (!flags) {
+		if (!((ACPI_LV_OBJECTS & acpi_dbg_level) && (_COMPONENT & acpi_dbg_layer))) {
+			return;
+		}
+	}
+
+	acpi_os_printf ("%20s : %4.4s\n",     "Name", acpi_ut_get_node_name (node));
+	acpi_ex_out_string ("Type",           acpi_ut_get_type_name (node->type));
+	acpi_ex_out_integer ("Flags",         node->flags);
+	acpi_ex_out_integer ("Owner Id",      node->owner_id);
+	acpi_ex_out_integer ("Reference Count", node->reference_count);
+	acpi_ex_out_pointer ("Attached Object", acpi_ns_get_attached_object (node));
+	acpi_ex_out_pointer ("child_list",    node->child);
+	acpi_ex_out_pointer ("next_peer",     node->peer);
+	acpi_ex_out_pointer ("Parent",        acpi_ns_get_parent_node (node));
+}
+
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ex_dump_object_descriptor
+ *
+ * PARAMETERS:  *Object             - Descriptor to dump
+ *              Flags               - Force display
+ *
+ * DESCRIPTION: Dumps the members of the object descriptor given.
+ *
+ ****************************************************************************/
+
+void
+acpi_ex_dump_object_descriptor (
+	union acpi_operand_object       *obj_desc,
+	u32                             flags)
+{
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE ("ex_dump_object_descriptor");
+
+
+	if (!flags) {
+		if (!((ACPI_LV_OBJECTS & acpi_dbg_level) && (_COMPONENT & acpi_dbg_layer))) {
+			return_VOID;
+		}
+	}
+
+	if (ACPI_GET_DESCRIPTOR_TYPE (obj_desc) == ACPI_DESC_TYPE_NAMED) {
+		acpi_ex_dump_node ((struct acpi_namespace_node *) obj_desc, flags);
+		acpi_os_printf ("\nAttached Object (%p):\n",
+			((struct acpi_namespace_node *) obj_desc)->object);
+		acpi_ex_dump_object_descriptor (
+			((struct acpi_namespace_node *) obj_desc)->object, flags);
+		return_VOID;
+	}
+
+	if (ACPI_GET_DESCRIPTOR_TYPE (obj_desc) != ACPI_DESC_TYPE_OPERAND) {
+		acpi_os_printf (
+			"ex_dump_object_descriptor: %p is not an ACPI operand object: [%s]\n",
+			obj_desc, acpi_ut_get_descriptor_name (obj_desc));
+		return_VOID;
+	}
+
+	/* Common Fields */
+
+	acpi_ex_out_string ("Type",             acpi_ut_get_object_type_name (obj_desc));
+	acpi_ex_out_integer ("Reference Count", obj_desc->common.reference_count);
+	acpi_ex_out_integer ("Flags",           obj_desc->common.flags);
+
+	/* Object-specific Fields */
+
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_INTEGER:
+
+		acpi_os_printf ("%20s : %8.8X%8.8X\n", "Value",
+				ACPI_FORMAT_UINT64 (obj_desc->integer.value));
+		break;
+
+
+	case ACPI_TYPE_STRING:
+
+		acpi_ex_out_integer ("Length",      obj_desc->string.length);
+
+		acpi_os_printf ("%20s : %p ", "Pointer", obj_desc->string.pointer);
+		acpi_ut_print_string (obj_desc->string.pointer, ACPI_UINT8_MAX);
+		acpi_os_printf ("\n");
+		break;
+
+
+	case ACPI_TYPE_BUFFER:
+
+		acpi_ex_out_integer ("Length",      obj_desc->buffer.length);
+		acpi_ex_out_pointer ("Pointer",     obj_desc->buffer.pointer);
+		ACPI_DUMP_BUFFER (obj_desc->buffer.pointer, obj_desc->buffer.length);
+		break;
+
+
+	case ACPI_TYPE_PACKAGE:
+
+		acpi_ex_out_integer ("Flags",       obj_desc->package.flags);
+		acpi_ex_out_integer ("Count",       obj_desc->package.count);
+		acpi_ex_out_pointer ("Elements",    obj_desc->package.elements);
+
+		/* Dump the package contents */
+
+		if (obj_desc->package.count > 0) {
+			acpi_os_printf ("\nPackage Contents:\n");
+			for (i = 0; i < obj_desc->package.count; i++) {
+				acpi_os_printf ("[%.3d] %p", i, obj_desc->package.elements[i]);
+				if (obj_desc->package.elements[i]) {
+					acpi_os_printf (" %s",
+						acpi_ut_get_object_type_name (obj_desc->package.elements[i]));
+				}
+				acpi_os_printf ("\n");
+			}
+		}
+		break;
+
+
+	case ACPI_TYPE_DEVICE:
+
+		acpi_ex_out_pointer ("Handler",     obj_desc->device.handler);
+		acpi_ex_out_pointer ("system_notify", obj_desc->device.system_notify);
+		acpi_ex_out_pointer ("device_notify", obj_desc->device.device_notify);
+		break;
+
+
+	case ACPI_TYPE_EVENT:
+
+		acpi_ex_out_pointer ("Semaphore",   obj_desc->event.semaphore);
+		break;
+
+
+	case ACPI_TYPE_METHOD:
+
+		acpi_ex_out_integer ("param_count", obj_desc->method.param_count);
+		acpi_ex_out_integer ("Concurrency", obj_desc->method.concurrency);
+		acpi_ex_out_pointer ("Semaphore",   obj_desc->method.semaphore);
+		acpi_ex_out_integer ("owning_id",   obj_desc->method.owning_id);
+		acpi_ex_out_integer ("aml_length",  obj_desc->method.aml_length);
+		acpi_ex_out_pointer ("aml_start",   obj_desc->method.aml_start);
+		break;
+
+
+	case ACPI_TYPE_MUTEX:
+
+		acpi_ex_out_integer ("sync_level",  obj_desc->mutex.sync_level);
+		acpi_ex_out_pointer ("owner_thread", obj_desc->mutex.owner_thread);
+		acpi_ex_out_integer ("acquire_depth", obj_desc->mutex.acquisition_depth);
+		acpi_ex_out_pointer ("Semaphore",   obj_desc->mutex.semaphore);
+		break;
+
+
+	case ACPI_TYPE_REGION:
+
+		acpi_ex_out_integer ("space_id",    obj_desc->region.space_id);
+		acpi_ex_out_integer ("Flags",       obj_desc->region.flags);
+		acpi_ex_out_address ("Address",     obj_desc->region.address);
+		acpi_ex_out_integer ("Length",      obj_desc->region.length);
+		acpi_ex_out_pointer ("Handler",     obj_desc->region.handler);
+		acpi_ex_out_pointer ("Next",        obj_desc->region.next);
+		break;
+
+
+	case ACPI_TYPE_POWER:
+
+		acpi_ex_out_integer ("system_level", obj_desc->power_resource.system_level);
+		acpi_ex_out_integer ("resource_order", obj_desc->power_resource.resource_order);
+		acpi_ex_out_pointer ("system_notify", obj_desc->power_resource.system_notify);
+		acpi_ex_out_pointer ("device_notify", obj_desc->power_resource.device_notify);
+		break;
+
+
+	case ACPI_TYPE_PROCESSOR:
+
+		acpi_ex_out_integer ("Processor ID", obj_desc->processor.proc_id);
+		acpi_ex_out_integer ("Length",      obj_desc->processor.length);
+		acpi_ex_out_address ("Address",     (acpi_physical_address) obj_desc->processor.address);
+		acpi_ex_out_pointer ("system_notify", obj_desc->processor.system_notify);
+		acpi_ex_out_pointer ("device_notify", obj_desc->processor.device_notify);
+		acpi_ex_out_pointer ("Handler",     obj_desc->processor.handler);
+		break;
+
+
+	case ACPI_TYPE_THERMAL:
+
+		acpi_ex_out_pointer ("system_notify", obj_desc->thermal_zone.system_notify);
+		acpi_ex_out_pointer ("device_notify", obj_desc->thermal_zone.device_notify);
+		acpi_ex_out_pointer ("Handler",     obj_desc->thermal_zone.handler);
+		break;
+
+
+	case ACPI_TYPE_BUFFER_FIELD:
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		acpi_ex_out_integer ("field_flags", obj_desc->common_field.field_flags);
+		acpi_ex_out_integer ("access_byte_width",obj_desc->common_field.access_byte_width);
+		acpi_ex_out_integer ("bit_length",  obj_desc->common_field.bit_length);
+		acpi_ex_out_integer ("fld_bit_offset", obj_desc->common_field.start_field_bit_offset);
+		acpi_ex_out_integer ("base_byte_offset", obj_desc->common_field.base_byte_offset);
+		acpi_ex_out_pointer ("parent_node", obj_desc->common_field.node);
+
+		switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+		case ACPI_TYPE_BUFFER_FIELD:
+			acpi_ex_out_pointer ("buffer_obj", obj_desc->buffer_field.buffer_obj);
+			break;
+
+		case ACPI_TYPE_LOCAL_REGION_FIELD:
+			acpi_ex_out_pointer ("region_obj", obj_desc->field.region_obj);
+			break;
+
+		case ACPI_TYPE_LOCAL_BANK_FIELD:
+			acpi_ex_out_integer ("Value",   obj_desc->bank_field.value);
+			acpi_ex_out_pointer ("region_obj", obj_desc->bank_field.region_obj);
+			acpi_ex_out_pointer ("bank_obj", obj_desc->bank_field.bank_obj);
+			break;
+
+		case ACPI_TYPE_LOCAL_INDEX_FIELD:
+			acpi_ex_out_integer ("Value",   obj_desc->index_field.value);
+			acpi_ex_out_pointer ("Index",   obj_desc->index_field.index_obj);
+			acpi_ex_out_pointer ("Data",    obj_desc->index_field.data_obj);
+			break;
+
+		default:
+			/* All object types covered above */
+			break;
+		}
+		break;
+
+
+	case ACPI_TYPE_LOCAL_REFERENCE:
+
+		acpi_ex_out_integer ("target_type", obj_desc->reference.target_type);
+		acpi_ex_out_string ("Opcode",       (acpi_ps_get_opcode_info (obj_desc->reference.opcode))->name);
+		acpi_ex_out_integer ("Offset",      obj_desc->reference.offset);
+		acpi_ex_out_pointer ("obj_desc",    obj_desc->reference.object);
+		acpi_ex_out_pointer ("Node",        obj_desc->reference.node);
+		acpi_ex_out_pointer ("Where",       obj_desc->reference.where);
+		break;
+
+
+	case ACPI_TYPE_LOCAL_ADDRESS_HANDLER:
+
+		acpi_ex_out_integer ("space_id",    obj_desc->address_space.space_id);
+		acpi_ex_out_pointer ("Next",        obj_desc->address_space.next);
+		acpi_ex_out_pointer ("region_list", obj_desc->address_space.region_list);
+		acpi_ex_out_pointer ("Node",        obj_desc->address_space.node);
+		acpi_ex_out_pointer ("Context",     obj_desc->address_space.context);
+		break;
+
+
+	case ACPI_TYPE_LOCAL_NOTIFY:
+
+		acpi_ex_out_pointer ("Node",        obj_desc->notify.node);
+		acpi_ex_out_pointer ("Context",     obj_desc->notify.context);
+		break;
+
+
+	case ACPI_TYPE_LOCAL_ALIAS:
+	case ACPI_TYPE_LOCAL_METHOD_ALIAS:
+	case ACPI_TYPE_LOCAL_EXTRA:
+	case ACPI_TYPE_LOCAL_DATA:
+	default:
+
+		acpi_os_printf (
+			"ex_dump_object_descriptor: Display not implemented for object type %s\n",
+			acpi_ut_get_object_type_name (obj_desc));
+		break;
+	}
+
+	return_VOID;
+}
+
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+#endif
+
diff --git a/drivers/acpi/executer/exfield.c b/drivers/acpi/executer/exfield.c
new file mode 100644
index 0000000..be7f212
--- /dev/null
+++ b/drivers/acpi/executer/exfield.c
@@ -0,0 +1,367 @@
+/******************************************************************************
+ *
+ * Module Name: exfield - ACPI AML (p-code) execution - field manipulation
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exfield")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_read_data_from_field
+ *
+ * PARAMETERS:  walk_state          - Current execution state
+ *              obj_desc            - The named field
+ *              ret_buffer_desc     - Where the return data object is stored
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read from a named field.  Returns either an Integer or a
+ *              Buffer, depending on the size of the field.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_read_data_from_field (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **ret_buffer_desc)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *buffer_desc;
+	acpi_size                       length;
+	void                            *buffer;
+	u8                              locked;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_read_data_from_field", obj_desc);
+
+
+	/* Parameter validation */
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * If the buffer_field arguments have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_buffer_field_arguments (obj_desc);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+	}
+	else if ((ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+			 (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) {
+		/*
+		 * This is an SMBus read.  We must create a buffer to hold the data
+		 * and directly access the region handler.
+		 */
+		buffer_desc = acpi_ut_create_buffer_object (ACPI_SMBUS_BUFFER_SIZE);
+		if (!buffer_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Lock entire transaction if requested */
+
+		locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags);
+
+		/*
+		 * Perform the read.
+		 * Note: Smbus protocol value is passed in upper 16-bits of Function
+		 */
+		status = acpi_ex_access_region (obj_desc, 0,
+				  ACPI_CAST_PTR (acpi_integer, buffer_desc->buffer.pointer),
+				  ACPI_READ | (obj_desc->field.attribute << 16));
+		acpi_ex_release_global_lock (locked);
+		goto exit;
+	}
+
+	/*
+	 * Allocate a buffer for the contents of the field.
+	 *
+	 * If the field is larger than the size of an acpi_integer, create
+	 * a BUFFER to hold it.  Otherwise, use an INTEGER.  This allows
+	 * the use of arithmetic operators on the returned value if the
+	 * field size is equal or smaller than an Integer.
+	 *
+	 * Note: Field.length is in bits.
+	 */
+	length = (acpi_size) ACPI_ROUND_BITS_UP_TO_BYTES (obj_desc->field.bit_length);
+	if (length > acpi_gbl_integer_byte_width) {
+		/* Field is too large for an Integer, create a Buffer instead */
+
+		buffer_desc = acpi_ut_create_buffer_object (length);
+		if (!buffer_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+		buffer = buffer_desc->buffer.pointer;
+	}
+	else {
+		/* Field will fit within an Integer (normal case) */
+
+		buffer_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!buffer_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		length = acpi_gbl_integer_byte_width;
+		buffer_desc->integer.value = 0;
+		buffer = &buffer_desc->integer.value;
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+		"field_read [TO]:  Obj %p, Type %X, Buf %p, byte_len %X\n",
+		obj_desc, ACPI_GET_OBJECT_TYPE (obj_desc), buffer, (u32) length));
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+		"field_read [FROM]: bit_len %X, bit_off %X, byte_off %X\n",
+		obj_desc->common_field.bit_length,
+		obj_desc->common_field.start_field_bit_offset,
+		obj_desc->common_field.base_byte_offset));
+
+	/* Lock entire transaction if requested */
+
+	locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags);
+
+	/* Read from the field */
+
+	status = acpi_ex_extract_from_field (obj_desc, buffer, (u32) length);
+	acpi_ex_release_global_lock (locked);
+
+
+exit:
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (buffer_desc);
+	}
+	else if (ret_buffer_desc) {
+		*ret_buffer_desc = buffer_desc;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_write_data_to_field
+ *
+ * PARAMETERS:  source_desc         - Contains data to write
+ *              obj_desc            - The named field
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Write to a named field
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_write_data_to_field (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **result_desc)
+{
+	acpi_status                     status;
+	u32                             length;
+	u32                             required_length;
+	void                            *buffer;
+	void                            *new_buffer;
+	u8                              locked;
+	union acpi_operand_object       *buffer_desc;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_write_data_to_field", obj_desc);
+
+
+	/* Parameter validation */
+
+	if (!source_desc || !obj_desc) {
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * If the buffer_field arguments have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_buffer_field_arguments (obj_desc);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+	}
+	else if ((ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+			 (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS)) {
+		/*
+		 * This is an SMBus write.  We will bypass the entire field mechanism
+		 * and handoff the buffer directly to the handler.
+		 *
+		 * Source must be a buffer of sufficient size (ACPI_SMBUS_BUFFER_SIZE).
+		 */
+		if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_BUFFER) {
+			ACPI_REPORT_ERROR (("SMBus write requires Buffer, found type %s\n",
+				acpi_ut_get_object_type_name (source_desc)));
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		if (source_desc->buffer.length < ACPI_SMBUS_BUFFER_SIZE) {
+			ACPI_REPORT_ERROR (("SMBus write requires Buffer of length %X, found length %X\n",
+				ACPI_SMBUS_BUFFER_SIZE, source_desc->buffer.length));
+			return_ACPI_STATUS (AE_AML_BUFFER_LIMIT);
+		}
+
+		buffer_desc = acpi_ut_create_buffer_object (ACPI_SMBUS_BUFFER_SIZE);
+		if (!buffer_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		buffer = buffer_desc->buffer.pointer;
+		ACPI_MEMCPY (buffer, source_desc->buffer.pointer, ACPI_SMBUS_BUFFER_SIZE);
+
+		/* Lock entire transaction if requested */
+
+		locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags);
+
+		/*
+		 * Perform the write (returns status and perhaps data in the same buffer)
+		 * Note: SMBus protocol type is passed in upper 16-bits of Function.
+		 */
+		status = acpi_ex_access_region (obj_desc, 0,
+				  (acpi_integer *) buffer,
+				  ACPI_WRITE | (obj_desc->field.attribute << 16));
+		acpi_ex_release_global_lock (locked);
+
+		*result_desc = buffer_desc;
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Get a pointer to the data to be written
+	 */
+	switch (ACPI_GET_OBJECT_TYPE (source_desc)) {
+	case ACPI_TYPE_INTEGER:
+		buffer = &source_desc->integer.value;
+		length = sizeof (source_desc->integer.value);
+		break;
+
+	case ACPI_TYPE_BUFFER:
+		buffer = source_desc->buffer.pointer;
+		length = source_desc->buffer.length;
+		break;
+
+	case ACPI_TYPE_STRING:
+		buffer = source_desc->string.pointer;
+		length = source_desc->string.length;
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+	}
+
+	/*
+	 * We must have a buffer that is at least as long as the field
+	 * we are writing to.  This is because individual fields are
+	 * indivisible and partial writes are not supported -- as per
+	 * the ACPI specification.
+	 */
+	new_buffer = NULL;
+	required_length = ACPI_ROUND_BITS_UP_TO_BYTES (obj_desc->common_field.bit_length);
+
+	if (length < required_length) {
+		/* We need to create a new buffer */
+
+		new_buffer = ACPI_MEM_CALLOCATE (required_length);
+		if (!new_buffer) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/*
+		 * Copy the original data to the new buffer, starting
+		 * at Byte zero.  All unused (upper) bytes of the
+		 * buffer will be 0.
+		 */
+		ACPI_MEMCPY ((char *) new_buffer, (char *) buffer, length);
+		buffer = new_buffer;
+		length = required_length;
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+		"field_write [FROM]: Obj %p (%s:%X), Buf %p, byte_len %X\n",
+		source_desc, acpi_ut_get_type_name (ACPI_GET_OBJECT_TYPE (source_desc)),
+		ACPI_GET_OBJECT_TYPE (source_desc), buffer, length));
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+		"field_write [TO]:  Obj %p (%s:%X), bit_len %X, bit_off %X, byte_off %X\n",
+		obj_desc, acpi_ut_get_type_name (ACPI_GET_OBJECT_TYPE (obj_desc)),
+		ACPI_GET_OBJECT_TYPE (obj_desc),
+		obj_desc->common_field.bit_length,
+		obj_desc->common_field.start_field_bit_offset,
+		obj_desc->common_field.base_byte_offset));
+
+	/* Lock entire transaction if requested */
+
+	locked = acpi_ex_acquire_global_lock (obj_desc->common_field.field_flags);
+
+	/* Write to the field */
+
+	status = acpi_ex_insert_into_field (obj_desc, buffer, length);
+	acpi_ex_release_global_lock (locked);
+
+	/* Free temporary buffer if we used one */
+
+	if (new_buffer) {
+		ACPI_MEM_FREE (new_buffer);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exfldio.c b/drivers/acpi/executer/exfldio.c
new file mode 100644
index 0000000..9d0f9d2
--- /dev/null
+++ b/drivers/acpi/executer/exfldio.c
@@ -0,0 +1,835 @@
+/******************************************************************************
+ *
+ * Module Name: exfldio - Aml Field I/O
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acevents.h>
+#include <acpi/acdispat.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exfldio")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_setup_region
+ *
+ * PARAMETERS:  *obj_desc               - Field to be read or written
+ *              field_datum_byte_offset - Byte offset of this datum within the
+ *                                        parent field
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Common processing for acpi_ex_extract_from_field and
+ *              acpi_ex_insert_into_field. Initialize the Region if necessary and
+ *              validate the request.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_setup_region (
+	union acpi_operand_object       *obj_desc,
+	u32                             field_datum_byte_offset)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *rgn_desc;
+
+
+	ACPI_FUNCTION_TRACE_U32 ("ex_setup_region", field_datum_byte_offset);
+
+
+	rgn_desc = obj_desc->common_field.region_obj;
+
+	/* We must have a valid region */
+
+	if (ACPI_GET_OBJECT_TYPE (rgn_desc) != ACPI_TYPE_REGION) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Needed Region, found type %X (%s)\n",
+			ACPI_GET_OBJECT_TYPE (rgn_desc),
+			acpi_ut_get_object_type_name (rgn_desc)));
+
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+	}
+
+	/*
+	 * If the Region Address and Length have not been previously evaluated,
+	 * evaluate them now and save the results.
+	 */
+	if (!(rgn_desc->common.flags & AOPOBJ_DATA_VALID)) {
+		status = acpi_ds_get_region_arguments (rgn_desc);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	if (rgn_desc->region.space_id == ACPI_ADR_SPACE_SMBUS) {
+		/* SMBus has a non-linear address space */
+
+		return_ACPI_STATUS (AE_OK);
+	}
+
+#ifdef ACPI_UNDER_DEVELOPMENT
+	/*
+	 * If the Field access is any_acc, we can now compute the optimal
+	 * access (because we know know the length of the parent region)
+	 */
+	if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+#endif
+
+	/*
+	 * Validate the request.  The entire request from the byte offset for a
+	 * length of one field datum (access width) must fit within the region.
+	 * (Region length is specified in bytes)
+	 */
+	if (rgn_desc->region.length < (obj_desc->common_field.base_byte_offset
+			   + field_datum_byte_offset
+			   + obj_desc->common_field.access_byte_width)) {
+		if (acpi_gbl_enable_interpreter_slack) {
+			/*
+			 * Slack mode only:  We will go ahead and allow access to this
+			 * field if it is within the region length rounded up to the next
+			 * access width boundary.
+			 */
+			if (ACPI_ROUND_UP (rgn_desc->region.length,
+					   obj_desc->common_field.access_byte_width) >=
+				(obj_desc->common_field.base_byte_offset +
+				 (acpi_native_uint) obj_desc->common_field.access_byte_width +
+				 field_datum_byte_offset)) {
+				return_ACPI_STATUS (AE_OK);
+			}
+		}
+
+		if (rgn_desc->region.length < obj_desc->common_field.access_byte_width) {
+			/*
+			 * This is the case where the access_type (acc_word, etc.) is wider
+			 * than the region itself.  For example, a region of length one
+			 * byte, and a field with Dword access specified.
+			 */
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n",
+				acpi_ut_get_node_name (obj_desc->common_field.node),
+				obj_desc->common_field.access_byte_width,
+				acpi_ut_get_node_name (rgn_desc->region.node), rgn_desc->region.length));
+		}
+
+		/*
+		 * Offset rounded up to next multiple of field width
+		 * exceeds region length, indicate an error
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n",
+			acpi_ut_get_node_name (obj_desc->common_field.node),
+			obj_desc->common_field.base_byte_offset,
+			field_datum_byte_offset, obj_desc->common_field.access_byte_width,
+			acpi_ut_get_node_name (rgn_desc->region.node), rgn_desc->region.length));
+
+		return_ACPI_STATUS (AE_AML_REGION_LIMIT);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_access_region
+ *
+ * PARAMETERS:  *obj_desc               - Field to be read
+ *              field_datum_byte_offset - Byte offset of this datum within the
+ *                                        parent field
+ *              *Value                  - Where to store value (must at least
+ *                                        the size of acpi_integer)
+ *              Function                - Read or Write flag plus other region-
+ *                                        dependent flags
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read or Write a single field datum to an Operation Region.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_access_region (
+	union acpi_operand_object       *obj_desc,
+	u32                             field_datum_byte_offset,
+	acpi_integer                    *value,
+	u32                             function)
+{
+	acpi_status                     status;
+	union acpi_operand_object       *rgn_desc;
+	acpi_physical_address           address;
+
+
+	ACPI_FUNCTION_TRACE ("ex_access_region");
+
+
+	/*
+	 * Ensure that the region operands are fully evaluated and verify
+	 * the validity of the request
+	 */
+	status = acpi_ex_setup_region (obj_desc, field_datum_byte_offset);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * The physical address of this field datum is:
+	 *
+	 * 1) The base of the region, plus
+	 * 2) The base offset of the field, plus
+	 * 3) The current offset into the field
+	 */
+	rgn_desc = obj_desc->common_field.region_obj;
+	address = rgn_desc->region.address
+			 + obj_desc->common_field.base_byte_offset
+			 + field_datum_byte_offset;
+
+	if ((function & ACPI_IO_MASK) == ACPI_READ) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "[READ]"));
+	}
+	else {
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "[WRITE]"));
+	}
+
+	ACPI_DEBUG_PRINT_RAW ((ACPI_DB_BFIELD,
+		" Region [%s:%X], Width %X, byte_base %X, Offset %X at %8.8X%8.8X\n",
+		acpi_ut_get_region_name (rgn_desc->region.space_id),
+		rgn_desc->region.space_id,
+		obj_desc->common_field.access_byte_width,
+		obj_desc->common_field.base_byte_offset,
+		field_datum_byte_offset,
+		ACPI_FORMAT_UINT64 (address)));
+
+	/* Invoke the appropriate address_space/op_region handler */
+
+	status = acpi_ev_address_space_dispatch (rgn_desc, function,
+			  address, ACPI_MUL_8 (obj_desc->common_field.access_byte_width), value);
+
+	if (ACPI_FAILURE (status)) {
+		if (status == AE_NOT_IMPLEMENTED) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Region %s(%X) not implemented\n",
+				acpi_ut_get_region_name (rgn_desc->region.space_id),
+				rgn_desc->region.space_id));
+		}
+		else if (status == AE_NOT_EXIST) {
+			ACPI_REPORT_ERROR ((
+				"Region %s(%X) has no handler\n",
+				acpi_ut_get_region_name (rgn_desc->region.space_id),
+				rgn_desc->region.space_id));
+		}
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_register_overflow
+ *
+ * PARAMETERS:  *obj_desc               - Register(Field) to be written
+ *              Value                   - Value to be stored
+ *
+ * RETURN:      TRUE if value overflows the field, FALSE otherwise
+ *
+ * DESCRIPTION: Check if a value is out of range of the field being written.
+ *              Used to check if the values written to Index and Bank registers
+ *              are out of range.  Normally, the value is simply truncated
+ *              to fit the field, but this case is most likely a serious
+ *              coding error in the ASL.
+ *
+ ******************************************************************************/
+
+u8
+acpi_ex_register_overflow (
+	union acpi_operand_object       *obj_desc,
+	acpi_integer                    value)
+{
+
+	if (obj_desc->common_field.bit_length >= ACPI_INTEGER_BIT_SIZE) {
+		/*
+		 * The field is large enough to hold the maximum integer, so we can
+		 * never overflow it.
+		 */
+		return (FALSE);
+	}
+
+	if (value >= ((acpi_integer) 1 << obj_desc->common_field.bit_length)) {
+		/*
+		 * The Value is larger than the maximum value that can fit into
+		 * the register.
+		 */
+		return (TRUE);
+	}
+
+	/* The Value will fit into the field with no truncation */
+
+	return (FALSE);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_field_datum_io
+ *
+ * PARAMETERS:  *obj_desc               - Field to be read
+ *              field_datum_byte_offset - Byte offset of this datum within the
+ *                                        parent field
+ *              *Value                  - Where to store value (must be 64 bits)
+ *              read_write              - Read or Write flag
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read or Write a single datum of a field.  The field_type is
+ *              demultiplexed here to handle the different types of fields
+ *              (buffer_field, region_field, index_field, bank_field)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_field_datum_io (
+	union acpi_operand_object       *obj_desc,
+	u32                             field_datum_byte_offset,
+	acpi_integer                    *value,
+	u32                             read_write)
+{
+	acpi_status                     status;
+	acpi_integer                    local_value;
+
+
+	ACPI_FUNCTION_TRACE_U32 ("ex_field_datum_io", field_datum_byte_offset);
+
+
+	if (read_write == ACPI_READ) {
+		if (!value) {
+			local_value = 0;
+			value = &local_value; /* To support reads without saving return value */
+		}
+
+		/* Clear the entire return buffer first, [Very Important!] */
+
+		*value = 0;
+	}
+
+	/*
+	 * The four types of fields are:
+	 *
+	 * buffer_field - Read/write from/to a Buffer
+	 * region_field - Read/write from/to a Operation Region.
+	 * bank_field  - Write to a Bank Register, then read/write from/to an op_region
+	 * index_field - Write to an Index Register, then read/write from/to a Data Register
+	 */
+	switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+	case ACPI_TYPE_BUFFER_FIELD:
+		/*
+		 * If the buffer_field arguments have not been previously evaluated,
+		 * evaluate them now and save the results.
+		 */
+		if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
+			status = acpi_ds_get_buffer_field_arguments (obj_desc);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+		}
+
+		if (read_write == ACPI_READ) {
+			/*
+			 * Copy the data from the source buffer.
+			 * Length is the field width in bytes.
+			 */
+			ACPI_MEMCPY (value, (obj_desc->buffer_field.buffer_obj)->buffer.pointer
+					  + obj_desc->buffer_field.base_byte_offset
+					  + field_datum_byte_offset,
+					  obj_desc->common_field.access_byte_width);
+		}
+		else {
+			/*
+			 * Copy the data to the target buffer.
+			 * Length is the field width in bytes.
+			 */
+			ACPI_MEMCPY ((obj_desc->buffer_field.buffer_obj)->buffer.pointer
+					+ obj_desc->buffer_field.base_byte_offset
+					+ field_datum_byte_offset,
+					value, obj_desc->common_field.access_byte_width);
+		}
+
+		status = AE_OK;
+		break;
+
+
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+
+		/* Ensure that the bank_value is not beyond the capacity of the register */
+
+		if (acpi_ex_register_overflow (obj_desc->bank_field.bank_obj,
+				  (acpi_integer) obj_desc->bank_field.value)) {
+			return_ACPI_STATUS (AE_AML_REGISTER_LIMIT);
+		}
+
+		/*
+		 * For bank_fields, we must write the bank_value to the bank_register
+		 * (itself a region_field) before we can access the data.
+		 */
+		status = acpi_ex_insert_into_field (obj_desc->bank_field.bank_obj,
+				 &obj_desc->bank_field.value,
+				 sizeof (obj_desc->bank_field.value));
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/*
+		 * Now that the Bank has been selected, fall through to the
+		 * region_field case and write the datum to the Operation Region
+		 */
+
+		/*lint -fallthrough */
+
+
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+		/*
+		 * For simple region_fields, we just directly access the owning
+		 * Operation Region.
+		 */
+		status = acpi_ex_access_region (obj_desc, field_datum_byte_offset, value,
+				  read_write);
+		break;
+
+
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+
+		/* Ensure that the index_value is not beyond the capacity of the register */
+
+		if (acpi_ex_register_overflow (obj_desc->index_field.index_obj,
+				  (acpi_integer) obj_desc->index_field.value)) {
+			return_ACPI_STATUS (AE_AML_REGISTER_LIMIT);
+		}
+
+		/* Write the index value to the index_register (itself a region_field) */
+
+		field_datum_byte_offset += obj_desc->index_field.value;
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+				"Write to Index Register: Value %8.8X\n",
+				field_datum_byte_offset));
+
+		status = acpi_ex_insert_into_field (obj_desc->index_field.index_obj,
+				 &field_datum_byte_offset,
+				 sizeof (field_datum_byte_offset));
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+				"I/O to Data Register: value_ptr %p\n",
+				value));
+
+		if (read_write == ACPI_READ) {
+			/* Read the datum from the data_register */
+
+			status = acpi_ex_extract_from_field (obj_desc->index_field.data_obj,
+					  value, sizeof (acpi_integer));
+		}
+		else {
+			/* Write the datum to the data_register */
+
+			status = acpi_ex_insert_into_field (obj_desc->index_field.data_obj,
+					  value, sizeof (acpi_integer));
+		}
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("Wrong object type in field I/O %X\n",
+			ACPI_GET_OBJECT_TYPE (obj_desc)));
+		status = AE_AML_INTERNAL;
+		break;
+	}
+
+	if (ACPI_SUCCESS (status)) {
+		if (read_write == ACPI_READ) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Value Read %8.8X%8.8X, Width %d\n",
+					   ACPI_FORMAT_UINT64 (*value),
+					   obj_desc->common_field.access_byte_width));
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Value Written %8.8X%8.8X, Width %d\n",
+					   ACPI_FORMAT_UINT64 (*value),
+					   obj_desc->common_field.access_byte_width));
+		}
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_write_with_update_rule
+ *
+ * PARAMETERS:  *obj_desc           - Field to be set
+ *              Value               - Value to store
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Apply the field update rule to a field write
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_write_with_update_rule (
+	union acpi_operand_object       *obj_desc,
+	acpi_integer                    mask,
+	acpi_integer                    field_value,
+	u32                             field_datum_byte_offset)
+{
+	acpi_status                     status = AE_OK;
+	acpi_integer                    merged_value;
+	acpi_integer                    current_value;
+
+
+	ACPI_FUNCTION_TRACE_U32 ("ex_write_with_update_rule", mask);
+
+
+	/* Start with the new bits  */
+
+	merged_value = field_value;
+
+	/* If the mask is all ones, we don't need to worry about the update rule */
+
+	if (mask != ACPI_INTEGER_MAX) {
+		/* Decode the update rule */
+
+		switch (obj_desc->common_field.field_flags & AML_FIELD_UPDATE_RULE_MASK) {
+		case AML_FIELD_UPDATE_PRESERVE:
+			/*
+			 * Check if update rule needs to be applied (not if mask is all
+			 * ones)  The left shift drops the bits we want to ignore.
+			 */
+			if ((~mask << (ACPI_MUL_8 (sizeof (mask)) -
+					 ACPI_MUL_8 (obj_desc->common_field.access_byte_width))) != 0) {
+				/*
+				 * Read the current contents of the byte/word/dword containing
+				 * the field, and merge with the new field value.
+				 */
+				status = acpi_ex_field_datum_io (obj_desc, field_datum_byte_offset,
+						  &current_value, ACPI_READ);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+
+				merged_value |= (current_value & ~mask);
+			}
+			break;
+
+		case AML_FIELD_UPDATE_WRITE_AS_ONES:
+
+			/* Set positions outside the field to all ones */
+
+			merged_value |= ~mask;
+			break;
+
+		case AML_FIELD_UPDATE_WRITE_AS_ZEROS:
+
+			/* Set positions outside the field to all zeros */
+
+			merged_value &= mask;
+			break;
+
+		default:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"write_with_update_rule: Unknown update_rule setting: %X\n",
+				(obj_desc->common_field.field_flags & AML_FIELD_UPDATE_RULE_MASK)));
+			return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
+		}
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+		"Mask %8.8X%8.8X, datum_offset %X, Width %X, Value %8.8X%8.8X, merged_value %8.8X%8.8X\n",
+		ACPI_FORMAT_UINT64 (mask),
+		field_datum_byte_offset,
+		obj_desc->common_field.access_byte_width,
+		ACPI_FORMAT_UINT64 (field_value),
+		ACPI_FORMAT_UINT64 (merged_value)));
+
+	/* Write the merged value */
+
+	status = acpi_ex_field_datum_io (obj_desc, field_datum_byte_offset,
+			  &merged_value, ACPI_WRITE);
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_extract_from_field
+ *
+ * PARAMETERS:  obj_desc            - Field to be read
+ *              Buffer              - Where to store the field data
+ *              buffer_length       - Length of Buffer
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Retrieve the current value of the given field
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_extract_from_field (
+	union acpi_operand_object       *obj_desc,
+	void                            *buffer,
+	u32                             buffer_length)
+{
+	acpi_status                     status;
+	acpi_integer                    raw_datum;
+	acpi_integer                    merged_datum;
+	u32                             field_offset = 0;
+	u32                             buffer_offset = 0;
+	u32                             buffer_tail_bits;
+	u32                             datum_count;
+	u32                             field_datum_count;
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE ("ex_extract_from_field");
+
+
+	/* Validate target buffer and clear it */
+
+	if (buffer_length < ACPI_ROUND_BITS_UP_TO_BYTES (
+			 obj_desc->common_field.bit_length)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Field size %X (bits) is too large for buffer (%X)\n",
+			obj_desc->common_field.bit_length, buffer_length));
+
+		return_ACPI_STATUS (AE_BUFFER_OVERFLOW);
+	}
+	ACPI_MEMSET (buffer, 0, buffer_length);
+
+	/* Compute the number of datums (access width data items) */
+
+	datum_count = ACPI_ROUND_UP_TO (
+			   obj_desc->common_field.bit_length,
+			   obj_desc->common_field.access_bit_width);
+	field_datum_count = ACPI_ROUND_UP_TO (
+			   obj_desc->common_field.bit_length +
+			   obj_desc->common_field.start_field_bit_offset,
+			   obj_desc->common_field.access_bit_width);
+
+	/* Priming read from the field */
+
+	status = acpi_ex_field_datum_io (obj_desc, field_offset, &raw_datum, ACPI_READ);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+	merged_datum = raw_datum >> obj_desc->common_field.start_field_bit_offset;
+
+	/* Read the rest of the field */
+
+	for (i = 1; i < field_datum_count; i++) {
+		/* Get next input datum from the field */
+
+		field_offset += obj_desc->common_field.access_byte_width;
+		status = acpi_ex_field_datum_io (obj_desc, field_offset,
+				  &raw_datum, ACPI_READ);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* Merge with previous datum if necessary */
+
+		merged_datum |= raw_datum <<
+			(obj_desc->common_field.access_bit_width - obj_desc->common_field.start_field_bit_offset);
+
+		if (i == datum_count) {
+			break;
+		}
+
+		/* Write merged datum to target buffer */
+
+		ACPI_MEMCPY (((char *) buffer) + buffer_offset, &merged_datum,
+			ACPI_MIN(obj_desc->common_field.access_byte_width,
+					 buffer_length - buffer_offset));
+
+		buffer_offset += obj_desc->common_field.access_byte_width;
+		merged_datum = raw_datum >> obj_desc->common_field.start_field_bit_offset;
+	}
+
+	/* Mask off any extra bits in the last datum */
+
+	buffer_tail_bits = obj_desc->common_field.bit_length % obj_desc->common_field.access_bit_width;
+	if (buffer_tail_bits) {
+		merged_datum &= ACPI_MASK_BITS_ABOVE (buffer_tail_bits);
+	}
+
+	/* Write the last datum to the buffer */
+
+	ACPI_MEMCPY (((char *) buffer) + buffer_offset, &merged_datum,
+		ACPI_MIN(obj_desc->common_field.access_byte_width,
+				 buffer_length - buffer_offset));
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_insert_into_field
+ *
+ * PARAMETERS:  obj_desc            - Field to be written
+ *              Buffer              - Data to be written
+ *              buffer_length       - Length of Buffer
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store the Buffer contents into the given field
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_insert_into_field (
+	union acpi_operand_object       *obj_desc,
+	void                            *buffer,
+	u32                             buffer_length)
+{
+	acpi_status                     status;
+	acpi_integer                    mask;
+	acpi_integer                    merged_datum;
+	acpi_integer                    raw_datum = 0;
+	u32                             field_offset = 0;
+	u32                             buffer_offset = 0;
+	u32                             buffer_tail_bits;
+	u32                             datum_count;
+	u32                             field_datum_count;
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE ("ex_insert_into_field");
+
+
+	/* Validate input buffer */
+
+	if (buffer_length < ACPI_ROUND_BITS_UP_TO_BYTES (
+			 obj_desc->common_field.bit_length)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Field size %X (bits) is too large for buffer (%X)\n",
+			obj_desc->common_field.bit_length, buffer_length));
+
+		return_ACPI_STATUS (AE_BUFFER_OVERFLOW);
+	}
+
+	/* Compute the number of datums (access width data items) */
+
+	mask = ACPI_MASK_BITS_BELOW (obj_desc->common_field.start_field_bit_offset);
+	datum_count = ACPI_ROUND_UP_TO (obj_desc->common_field.bit_length,
+			  obj_desc->common_field.access_bit_width);
+	field_datum_count = ACPI_ROUND_UP_TO (obj_desc->common_field.bit_length +
+			   obj_desc->common_field.start_field_bit_offset,
+			   obj_desc->common_field.access_bit_width);
+
+	/* Get initial Datum from the input buffer */
+
+	ACPI_MEMCPY (&raw_datum, buffer,
+		ACPI_MIN(obj_desc->common_field.access_byte_width,
+				 buffer_length - buffer_offset));
+
+	merged_datum = raw_datum << obj_desc->common_field.start_field_bit_offset;
+
+	/* Write the entire field */
+
+	for (i = 1; i < field_datum_count; i++) {
+		/* Write merged datum to the target field */
+
+		merged_datum &= mask;
+		status = acpi_ex_write_with_update_rule (obj_desc, mask, merged_datum, field_offset);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* Start new output datum by merging with previous input datum */
+
+		field_offset += obj_desc->common_field.access_byte_width;
+		merged_datum = raw_datum >>
+			(obj_desc->common_field.access_bit_width - obj_desc->common_field.start_field_bit_offset);
+		mask = ACPI_INTEGER_MAX;
+
+		if (i == datum_count) {
+			break;
+		}
+
+		/* Get the next input datum from the buffer */
+
+		buffer_offset += obj_desc->common_field.access_byte_width;
+		ACPI_MEMCPY (&raw_datum, ((char *) buffer) + buffer_offset,
+			ACPI_MIN(obj_desc->common_field.access_byte_width,
+					 buffer_length - buffer_offset));
+		merged_datum |= raw_datum << obj_desc->common_field.start_field_bit_offset;
+	}
+
+	/* Mask off any extra bits in the last datum */
+
+	buffer_tail_bits = (obj_desc->common_field.bit_length +
+			obj_desc->common_field.start_field_bit_offset) % obj_desc->common_field.access_bit_width;
+	if (buffer_tail_bits) {
+		mask &= ACPI_MASK_BITS_ABOVE (buffer_tail_bits);
+	}
+
+	/* Write the last datum to the field */
+
+	merged_datum &= mask;
+	status = acpi_ex_write_with_update_rule (obj_desc, mask, merged_datum, field_offset);
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exmisc.c b/drivers/acpi/executer/exmisc.c
new file mode 100644
index 0000000..b542dcd
--- /dev/null
+++ b/drivers/acpi/executer/exmisc.c
@@ -0,0 +1,738 @@
+
+/******************************************************************************
+ *
+ * Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exmisc")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_get_object_reference
+ *
+ * PARAMETERS:  obj_desc            - Create a reference to this object
+ *              return_desc         - Where to store the reference
+ *              walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Obtain and return a "reference" to the target object
+ *              Common code for the ref_of_op and the cond_ref_of_op.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_get_object_reference (
+	union acpi_operand_object       *obj_desc,
+	union acpi_operand_object       **return_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *reference_obj;
+	union acpi_operand_object       *referenced_obj;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_get_object_reference", obj_desc);
+
+
+	*return_desc = NULL;
+
+	switch (ACPI_GET_DESCRIPTOR_TYPE (obj_desc)) {
+	case ACPI_DESC_TYPE_OPERAND:
+
+		if (ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_LOCAL_REFERENCE) {
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		/*
+		 * Must be a reference to a Local or Arg
+		 */
+		switch (obj_desc->reference.opcode) {
+		case AML_LOCAL_OP:
+		case AML_ARG_OP:
+		case AML_DEBUG_OP:
+
+			/* The referenced object is the pseudo-node for the local/arg */
+
+			referenced_obj = obj_desc->reference.object;
+			break;
+
+		default:
+
+			ACPI_REPORT_ERROR (("Unknown Reference opcode in get_reference %X\n",
+				obj_desc->reference.opcode));
+			return_ACPI_STATUS (AE_AML_INTERNAL);
+		}
+		break;
+
+
+	case ACPI_DESC_TYPE_NAMED:
+
+		/*
+		 * A named reference that has already been resolved to a Node
+		 */
+		referenced_obj = obj_desc;
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("Invalid descriptor type in get_reference: %X\n",
+				ACPI_GET_DESCRIPTOR_TYPE (obj_desc)));
+		return_ACPI_STATUS (AE_TYPE);
+	}
+
+
+	/* Create a new reference object */
+
+	reference_obj = acpi_ut_create_internal_object (ACPI_TYPE_LOCAL_REFERENCE);
+	if (!reference_obj) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	reference_obj->reference.opcode = AML_REF_OF_OP;
+	reference_obj->reference.object = referenced_obj;
+	*return_desc = reference_obj;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Object %p Type [%s], returning Reference %p\n",
+			obj_desc, acpi_ut_get_object_type_name (obj_desc), *return_desc));
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_concat_template
+ *
+ * PARAMETERS:  Operand0            - First source object
+ *              Operand1            - Second source object
+ *              actual_return_desc  - Where to place the return object
+ *              walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Concatenate two resource templates
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_concat_template (
+	union acpi_operand_object       *operand0,
+	union acpi_operand_object       *operand1,
+	union acpi_operand_object       **actual_return_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *return_desc;
+	u8                              *new_buf;
+	u8                              *end_tag1;
+	u8                              *end_tag2;
+	acpi_size                       length1;
+	acpi_size                       length2;
+
+
+	ACPI_FUNCTION_TRACE ("ex_concat_template");
+
+
+	/* Find the end_tags in each resource template */
+
+	end_tag1 = acpi_ut_get_resource_end_tag (operand0);
+	end_tag2 = acpi_ut_get_resource_end_tag (operand1);
+	if (!end_tag1 || !end_tag2) {
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+	}
+
+	/* Compute the length of each part */
+
+	length1 = ACPI_PTR_DIFF (end_tag1, operand0->buffer.pointer);
+	length2 = ACPI_PTR_DIFF (end_tag2, operand1->buffer.pointer) +
+			  2; /* Size of END_TAG */
+
+	/* Create a new buffer object for the result */
+
+	return_desc = acpi_ut_create_buffer_object (length1 + length2);
+	if (!return_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Copy the templates to the new descriptor */
+
+	new_buf = return_desc->buffer.pointer;
+	ACPI_MEMCPY (new_buf, operand0->buffer.pointer, length1);
+	ACPI_MEMCPY (new_buf + length1, operand1->buffer.pointer, length2);
+
+	/* Compute the new checksum */
+
+	new_buf[return_desc->buffer.length - 1] =
+			acpi_ut_generate_checksum (return_desc->buffer.pointer,
+					   (return_desc->buffer.length - 1));
+
+	/* Return the completed template descriptor */
+
+	*actual_return_desc = return_desc;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_do_concatenate
+ *
+ * PARAMETERS:  Operand0            - First source object
+ *              Operand1            - Second source object
+ *              actual_return_desc  - Where to place the return object
+ *              walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Concatenate two objects OF THE SAME TYPE.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_do_concatenate (
+	union acpi_operand_object       *operand0,
+	union acpi_operand_object       *operand1,
+	union acpi_operand_object       **actual_return_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *local_operand1 = operand1;
+	union acpi_operand_object       *return_desc;
+	char                            *new_buf;
+	acpi_status                     status;
+	acpi_size                       new_length;
+
+
+	ACPI_FUNCTION_TRACE ("ex_do_concatenate");
+
+
+	/*
+	 * Convert the second operand if necessary.  The first operand
+	 * determines the type of the second operand, (See the Data Types
+	 * section of the ACPI specification.)  Both object types are
+	 * guaranteed to be either Integer/String/Buffer by the operand
+	 * resolution mechanism.
+	 */
+	switch (ACPI_GET_OBJECT_TYPE (operand0)) {
+	case ACPI_TYPE_INTEGER:
+		status = acpi_ex_convert_to_integer (operand1, &local_operand1, 16);
+		break;
+
+	case ACPI_TYPE_STRING:
+		status = acpi_ex_convert_to_string (operand1, &local_operand1,
+				 ACPI_IMPLICIT_CONVERT_HEX);
+		break;
+
+	case ACPI_TYPE_BUFFER:
+		status = acpi_ex_convert_to_buffer (operand1, &local_operand1);
+		break;
+
+	default:
+		ACPI_REPORT_ERROR (("Concat - invalid obj type: %X\n",
+				ACPI_GET_OBJECT_TYPE (operand0)));
+		status = AE_AML_INTERNAL;
+	}
+
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/*
+	 * Both operands are now known to be the same object type
+	 * (Both are Integer, String, or Buffer), and we can now perform the
+	 * concatenation.
+	 */
+
+	/*
+	 * There are three cases to handle:
+	 *
+	 * 1) Two Integers concatenated to produce a new Buffer
+	 * 2) Two Strings concatenated to produce a new String
+	 * 3) Two Buffers concatenated to produce a new Buffer
+	 */
+	switch (ACPI_GET_OBJECT_TYPE (operand0)) {
+	case ACPI_TYPE_INTEGER:
+
+		/* Result of two Integers is a Buffer */
+		/* Need enough buffer space for two integers */
+
+		return_desc = acpi_ut_create_buffer_object (
+				   ACPI_MUL_2 (acpi_gbl_integer_byte_width));
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		new_buf = (char *) return_desc->buffer.pointer;
+
+		/* Copy the first integer, LSB first */
+
+		ACPI_MEMCPY (new_buf,
+				  &operand0->integer.value,
+				  acpi_gbl_integer_byte_width);
+
+		/* Copy the second integer (LSB first) after the first */
+
+		ACPI_MEMCPY (new_buf + acpi_gbl_integer_byte_width,
+				  &local_operand1->integer.value,
+				  acpi_gbl_integer_byte_width);
+		break;
+
+	case ACPI_TYPE_STRING:
+
+		/* Result of two Strings is a String */
+
+		new_length = (acpi_size) operand0->string.length +
+				 (acpi_size) local_operand1->string.length;
+		if (new_length > ACPI_MAX_STRING_CONVERSION) {
+			status = AE_AML_STRING_LIMIT;
+			goto cleanup;
+		}
+
+		return_desc = acpi_ut_create_string_object (new_length);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		new_buf = return_desc->string.pointer;
+
+		/* Concatenate the strings */
+
+		ACPI_STRCPY (new_buf,
+				  operand0->string.pointer);
+		ACPI_STRCPY (new_buf + operand0->string.length,
+				  local_operand1->string.pointer);
+		break;
+
+	case ACPI_TYPE_BUFFER:
+
+		/* Result of two Buffers is a Buffer */
+
+		return_desc = acpi_ut_create_buffer_object (
+				   (acpi_size) operand0->buffer.length +
+				   (acpi_size) local_operand1->buffer.length);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		new_buf = (char *) return_desc->buffer.pointer;
+
+		/* Concatenate the buffers */
+
+		ACPI_MEMCPY (new_buf,
+				  operand0->buffer.pointer,
+				  operand0->buffer.length);
+		ACPI_MEMCPY (new_buf + operand0->buffer.length,
+				  local_operand1->buffer.pointer,
+				  local_operand1->buffer.length);
+		break;
+
+	default:
+
+		/* Invalid object type, should not happen here */
+
+		ACPI_REPORT_ERROR (("Concatenate - Invalid object type: %X\n",
+				ACPI_GET_OBJECT_TYPE (operand0)));
+		status =AE_AML_INTERNAL;
+		goto cleanup;
+	}
+
+	*actual_return_desc = return_desc;
+
+cleanup:
+	if (local_operand1 != operand1) {
+		acpi_ut_remove_reference (local_operand1);
+	}
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_do_math_op
+ *
+ * PARAMETERS:  Opcode              - AML opcode
+ *              Integer0            - Integer operand #0
+ *              Integer1            - Integer operand #1
+ *
+ * RETURN:      Integer result of the operation
+ *
+ * DESCRIPTION: Execute a math AML opcode. The purpose of having all of the
+ *              math functions here is to prevent a lot of pointer dereferencing
+ *              to obtain the operands.
+ *
+ ******************************************************************************/
+
+acpi_integer
+acpi_ex_do_math_op (
+	u16                             opcode,
+	acpi_integer                    integer0,
+	acpi_integer                    integer1)
+{
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	switch (opcode) {
+	case AML_ADD_OP:                /* Add (Integer0, Integer1, Result) */
+
+		return (integer0 + integer1);
+
+
+	case AML_BIT_AND_OP:            /* And (Integer0, Integer1, Result) */
+
+		return (integer0 & integer1);
+
+
+	case AML_BIT_NAND_OP:           /* NAnd (Integer0, Integer1, Result) */
+
+		return (~(integer0 & integer1));
+
+
+	case AML_BIT_OR_OP:             /* Or (Integer0, Integer1, Result) */
+
+		return (integer0 | integer1);
+
+
+	case AML_BIT_NOR_OP:            /* NOr (Integer0, Integer1, Result) */
+
+		return (~(integer0 | integer1));
+
+
+	case AML_BIT_XOR_OP:            /* XOr (Integer0, Integer1, Result) */
+
+		return (integer0 ^ integer1);
+
+
+	case AML_MULTIPLY_OP:           /* Multiply (Integer0, Integer1, Result) */
+
+		return (integer0 * integer1);
+
+
+	case AML_SHIFT_LEFT_OP:         /* shift_left (Operand, shift_count, Result) */
+
+		return (integer0 << integer1);
+
+
+	case AML_SHIFT_RIGHT_OP:        /* shift_right (Operand, shift_count, Result) */
+
+		return (integer0 >> integer1);
+
+
+	case AML_SUBTRACT_OP:           /* Subtract (Integer0, Integer1, Result) */
+
+		return (integer0 - integer1);
+
+	default:
+
+		return (0);
+	}
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_do_logical_numeric_op
+ *
+ * PARAMETERS:  Opcode              - AML opcode
+ *              Integer0            - Integer operand #0
+ *              Integer1            - Integer operand #1
+ *              logical_result      - TRUE/FALSE result of the operation
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute a logical "Numeric" AML opcode. For these Numeric
+ *              operators (LAnd and LOr), both operands must be integers.
+ *
+ *              Note: cleanest machine code seems to be produced by the code
+ *              below, rather than using statements of the form:
+ *                  Result = (Integer0 && Integer1);
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_do_logical_numeric_op (
+	u16                             opcode,
+	acpi_integer                    integer0,
+	acpi_integer                    integer1,
+	u8                              *logical_result)
+{
+	acpi_status                     status = AE_OK;
+	u8                              local_result = FALSE;
+
+
+	ACPI_FUNCTION_TRACE ("ex_do_logical_numeric_op");
+
+
+	switch (opcode) {
+	case AML_LAND_OP:               /* LAnd (Integer0, Integer1) */
+
+		if (integer0 && integer1) {
+			local_result = TRUE;
+		}
+		break;
+
+	case AML_LOR_OP:                /* LOr (Integer0, Integer1) */
+
+		if (integer0 || integer1) {
+			local_result = TRUE;
+		}
+		break;
+
+	default:
+		status = AE_AML_INTERNAL;
+		break;
+	}
+
+	/* Return the logical result and status */
+
+	*logical_result = local_result;
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_do_logical_op
+ *
+ * PARAMETERS:  Opcode              - AML opcode
+ *              Operand0            - operand #0
+ *              Operand1            - operand #1
+ *              logical_result      - TRUE/FALSE result of the operation
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute a logical AML opcode. The purpose of having all of the
+ *              functions here is to prevent a lot of pointer dereferencing
+ *              to obtain the operands and to simplify the generation of the
+ *              logical value. For the Numeric operators (LAnd and LOr), both
+ *              operands must be integers. For the other logical operators,
+ *              operands can be any combination of Integer/String/Buffer. The
+ *              first operand determines the type to which the second operand
+ *              will be converted.
+ *
+ *              Note: cleanest machine code seems to be produced by the code
+ *              below, rather than using statements of the form:
+ *                  Result = (Operand0 == Operand1);
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_do_logical_op (
+	u16                             opcode,
+	union acpi_operand_object       *operand0,
+	union acpi_operand_object       *operand1,
+	u8                              *logical_result)
+{
+	union acpi_operand_object       *local_operand1 = operand1;
+	acpi_integer                    integer0;
+	acpi_integer                    integer1;
+	u32                             length0;
+	u32                             length1;
+	acpi_status                     status = AE_OK;
+	u8                              local_result = FALSE;
+	int                             compare;
+
+
+	ACPI_FUNCTION_TRACE ("ex_do_logical_op");
+
+
+	/*
+	 * Convert the second operand if necessary.  The first operand
+	 * determines the type of the second operand, (See the Data Types
+	 * section of the ACPI 3.0+ specification.)  Both object types are
+	 * guaranteed to be either Integer/String/Buffer by the operand
+	 * resolution mechanism.
+	 */
+	switch (ACPI_GET_OBJECT_TYPE (operand0)) {
+	case ACPI_TYPE_INTEGER:
+		status = acpi_ex_convert_to_integer (operand1, &local_operand1, 16);
+		break;
+
+	case ACPI_TYPE_STRING:
+		status = acpi_ex_convert_to_string (operand1, &local_operand1,
+				 ACPI_IMPLICIT_CONVERT_HEX);
+		break;
+
+	case ACPI_TYPE_BUFFER:
+		status = acpi_ex_convert_to_buffer (operand1, &local_operand1);
+		break;
+
+	default:
+		status = AE_AML_INTERNAL;
+		break;
+	}
+
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/*
+	 * Two cases: 1) Both Integers, 2) Both Strings or Buffers
+	 */
+	if (ACPI_GET_OBJECT_TYPE (operand0) == ACPI_TYPE_INTEGER) {
+		/*
+		 * 1) Both operands are of type integer
+		 *    Note: local_operand1 may have changed above
+		 */
+		integer0 = operand0->integer.value;
+		integer1 = local_operand1->integer.value;
+
+		switch (opcode) {
+		case AML_LEQUAL_OP:             /* LEqual (Operand0, Operand1) */
+
+			if (integer0 == integer1) {
+				local_result = TRUE;
+			}
+			break;
+
+		case AML_LGREATER_OP:           /* LGreater (Operand0, Operand1) */
+
+			if (integer0 > integer1) {
+				local_result = TRUE;
+			}
+			break;
+
+		case AML_LLESS_OP:              /* LLess (Operand0, Operand1) */
+
+			if (integer0 < integer1) {
+				local_result = TRUE;
+			}
+			break;
+
+		default:
+			status = AE_AML_INTERNAL;
+			break;
+		}
+	}
+	else {
+		/*
+		 * 2) Both operands are Strings or both are Buffers
+		 *    Note: Code below takes advantage of common Buffer/String
+		 *          object fields. local_operand1 may have changed above. Use
+		 *          memcmp to handle nulls in buffers.
+		 */
+		length0 = operand0->buffer.length;
+		length1 = local_operand1->buffer.length;
+
+		/* Lexicographic compare: compare the data bytes */
+
+		compare = ACPI_MEMCMP ((const char * ) operand0->buffer.pointer,
+				 (const char * ) local_operand1->buffer.pointer,
+				 (length0 > length1) ? length1 : length0);
+
+		switch (opcode) {
+		case AML_LEQUAL_OP:             /* LEqual (Operand0, Operand1) */
+
+			/* Length and all bytes must be equal */
+
+			if ((length0 == length1) &&
+				(compare == 0)) {
+				/* Length and all bytes match ==> TRUE */
+
+				local_result = TRUE;
+			}
+			break;
+
+		case AML_LGREATER_OP:           /* LGreater (Operand0, Operand1) */
+
+			if (compare > 0) {
+				local_result = TRUE;
+				goto cleanup;   /* TRUE */
+			}
+			if (compare < 0) {
+				goto cleanup;   /* FALSE */
+			}
+
+			/* Bytes match (to shortest length), compare lengths */
+
+			if (length0 > length1) {
+				local_result = TRUE;
+			}
+			break;
+
+		case AML_LLESS_OP:              /* LLess (Operand0, Operand1) */
+
+			if (compare > 0) {
+				goto cleanup;   /* FALSE */
+			}
+			if (compare < 0) {
+				local_result = TRUE;
+				goto cleanup;   /* TRUE */
+			}
+
+			/* Bytes match (to shortest length), compare lengths */
+
+			if (length0 < length1) {
+				local_result = TRUE;
+			}
+			break;
+
+		default:
+			status = AE_AML_INTERNAL;
+			break;
+		}
+	}
+
+cleanup:
+
+	/* New object was created if implicit conversion performed - delete */
+
+	if (local_operand1 != operand1) {
+		acpi_ut_remove_reference (local_operand1);
+	}
+
+	/* Return the logical result and status */
+
+	*logical_result = local_result;
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
new file mode 100644
index 0000000..68c4bb1
--- /dev/null
+++ b/drivers/acpi/executer/exmutex.c
@@ -0,0 +1,363 @@
+
+/******************************************************************************
+ *
+ * Module Name: exmutex - ASL Mutex Acquire/Release functions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exmutex")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_unlink_mutex
+ *
+ * PARAMETERS:  obj_desc            - The mutex to be unlinked
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Remove a mutex from the "acquired_mutex" list
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_unlink_mutex (
+	union acpi_operand_object       *obj_desc)
+{
+	struct acpi_thread_state        *thread = obj_desc->mutex.owner_thread;
+
+
+	if (!thread) {
+		return;
+	}
+
+	/* Doubly linked list */
+
+	if (obj_desc->mutex.next) {
+		(obj_desc->mutex.next)->mutex.prev = obj_desc->mutex.prev;
+	}
+
+	if (obj_desc->mutex.prev) {
+		(obj_desc->mutex.prev)->mutex.next = obj_desc->mutex.next;
+	}
+	else {
+		thread->acquired_mutex_list = obj_desc->mutex.next;
+	}
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_link_mutex
+ *
+ * PARAMETERS:  obj_desc            - The mutex to be linked
+ *              list_head           - head of the "acquired_mutex" list
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Add a mutex to the "acquired_mutex" list for this walk
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_link_mutex (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_thread_state        *thread)
+{
+	union acpi_operand_object       *list_head;
+
+
+	list_head = thread->acquired_mutex_list;
+
+	/* This object will be the first object in the list */
+
+	obj_desc->mutex.prev = NULL;
+	obj_desc->mutex.next = list_head;
+
+	/* Update old first object to point back to this object */
+
+	if (list_head) {
+		list_head->mutex.prev = obj_desc;
+	}
+
+	/* Update list head */
+
+	thread->acquired_mutex_list = obj_desc;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_acquire_mutex
+ *
+ * PARAMETERS:  time_desc           - The 'time to delay' object descriptor
+ *              obj_desc            - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Acquire an AML mutex
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_acquire_mutex (
+	union acpi_operand_object       *time_desc,
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_acquire_mutex", obj_desc);
+
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* Sanity check -- we must have a valid thread ID */
+
+	if (!walk_state->thread) {
+		ACPI_REPORT_ERROR (("Cannot acquire Mutex [%4.4s], null thread info\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_INTERNAL);
+	}
+
+	/*
+	 * Current Sync must be less than or equal to the sync level of the
+	 * mutex.  This mechanism provides some deadlock prevention
+	 */
+	if (walk_state->thread->current_sync_level > obj_desc->mutex.sync_level) {
+		ACPI_REPORT_ERROR (("Cannot acquire Mutex [%4.4s], incorrect sync_level\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_MUTEX_ORDER);
+	}
+
+	/* Support for multiple acquires by the owning thread */
+
+	if (obj_desc->mutex.owner_thread) {
+		/* Special case for Global Lock, allow all threads */
+
+		if ((obj_desc->mutex.owner_thread->thread_id == walk_state->thread->thread_id) ||
+			(obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore)) {
+			/*
+			 * The mutex is already owned by this thread,
+			 * just increment the acquisition depth
+			 */
+			obj_desc->mutex.acquisition_depth++;
+			return_ACPI_STATUS (AE_OK);
+		}
+	}
+
+	/* Acquire the mutex, wait if necessary */
+
+	status = acpi_ex_system_acquire_mutex (time_desc, obj_desc);
+	if (ACPI_FAILURE (status)) {
+		/* Includes failure from a timeout on time_desc */
+
+		return_ACPI_STATUS (status);
+	}
+
+	/* Have the mutex: update mutex and walk info and save the sync_level */
+
+	obj_desc->mutex.owner_thread     = walk_state->thread;
+	obj_desc->mutex.acquisition_depth = 1;
+	obj_desc->mutex.original_sync_level = walk_state->thread->current_sync_level;
+
+	walk_state->thread->current_sync_level = obj_desc->mutex.sync_level;
+
+	/* Link the mutex to the current thread for force-unlock at method exit */
+
+	acpi_ex_link_mutex (obj_desc, walk_state->thread);
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_release_mutex
+ *
+ * PARAMETERS:  obj_desc            - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Release a previously acquired Mutex.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_release_mutex (
+	union acpi_operand_object       *obj_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ex_release_mutex");
+
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* The mutex must have been previously acquired in order to release it */
+
+	if (!obj_desc->mutex.owner_thread) {
+		ACPI_REPORT_ERROR (("Cannot release Mutex [%4.4s], not acquired\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_MUTEX_NOT_ACQUIRED);
+	}
+
+	/* Sanity check -- we must have a valid thread ID */
+
+	if (!walk_state->thread) {
+		ACPI_REPORT_ERROR (("Cannot release Mutex [%4.4s], null thread info\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_INTERNAL);
+	}
+
+	/*
+	 * The Mutex is owned, but this thread must be the owner.
+	 * Special case for Global Lock, any thread can release
+	 */
+	if ((obj_desc->mutex.owner_thread->thread_id != walk_state->thread->thread_id) &&
+		(obj_desc->mutex.semaphore != acpi_gbl_global_lock_semaphore)) {
+		ACPI_REPORT_ERROR ((
+			"Thread %X cannot release Mutex [%4.4s] acquired by thread %X\n",
+			walk_state->thread->thread_id,
+			acpi_ut_get_node_name (obj_desc->mutex.node),
+			obj_desc->mutex.owner_thread->thread_id));
+		return_ACPI_STATUS (AE_AML_NOT_OWNER);
+	}
+
+	/*
+	 * The sync level of the mutex must be less than or
+	 * equal to the current sync level
+	 */
+	if (obj_desc->mutex.sync_level > walk_state->thread->current_sync_level) {
+		ACPI_REPORT_ERROR (("Cannot release Mutex [%4.4s], incorrect sync_level\n",
+				acpi_ut_get_node_name (obj_desc->mutex.node)));
+		return_ACPI_STATUS (AE_AML_MUTEX_ORDER);
+	}
+
+	/* Match multiple Acquires with multiple Releases */
+
+	obj_desc->mutex.acquisition_depth--;
+	if (obj_desc->mutex.acquisition_depth != 0) {
+		/* Just decrement the depth and return */
+
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Unlink the mutex from the owner's list */
+
+	acpi_ex_unlink_mutex (obj_desc);
+
+	/* Release the mutex */
+
+	status = acpi_ex_system_release_mutex (obj_desc);
+
+	/* Update the mutex and walk state, restore sync_level before acquire */
+
+	obj_desc->mutex.owner_thread = NULL;
+	walk_state->thread->current_sync_level = obj_desc->mutex.original_sync_level;
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_release_all_mutexes
+ *
+ * PARAMETERS:  mutex_list            - Head of the mutex list
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Release all mutexes in the list
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_release_all_mutexes (
+	struct acpi_thread_state        *thread)
+{
+	union acpi_operand_object       *next = thread->acquired_mutex_list;
+	union acpi_operand_object       *this;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/* Traverse the list of owned mutexes, releasing each one */
+
+	while (next) {
+		this = next;
+		next = this->mutex.next;
+
+		this->mutex.acquisition_depth = 1;
+		this->mutex.prev             = NULL;
+		this->mutex.next             = NULL;
+
+		 /* Release the mutex */
+
+		status = acpi_ex_system_release_mutex (this);
+		if (ACPI_FAILURE (status)) {
+			continue;
+		}
+
+		/* Mark mutex unowned */
+
+		this->mutex.owner_thread = NULL;
+
+		/* Update Thread sync_level (Last mutex is the important one) */
+
+		thread->current_sync_level = this->mutex.original_sync_level;
+	}
+}
+
+
diff --git a/drivers/acpi/executer/exnames.c b/drivers/acpi/executer/exnames.c
new file mode 100644
index 0000000..7911c53
--- /dev/null
+++ b/drivers/acpi/executer/exnames.c
@@ -0,0 +1,427 @@
+
+/******************************************************************************
+ *
+ * Module Name: exnames - interpreter/scanner name load/execute
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exnames")
+
+
+/* AML Package Length encodings */
+
+#define ACPI_AML_PACKAGE_TYPE1   0x40
+#define ACPI_AML_PACKAGE_TYPE2   0x4000
+#define ACPI_AML_PACKAGE_TYPE3   0x400000
+#define ACPI_AML_PACKAGE_TYPE4   0x40000000
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_allocate_name_string
+ *
+ * PARAMETERS:  prefix_count        - Count of parent levels. Special cases:
+ *                                    (-1) = root,  0 = none
+ *              num_name_segs       - count of 4-character name segments
+ *
+ * RETURN:      A pointer to the allocated string segment.  This segment must
+ *              be deleted by the caller.
+ *
+ * DESCRIPTION: Allocate a buffer for a name string. Ensure allocated name
+ *              string is long enough, and set up prefix if any.
+ *
+ ******************************************************************************/
+
+char *
+acpi_ex_allocate_name_string (
+	u32                             prefix_count,
+	u32                             num_name_segs)
+{
+	char                            *temp_ptr;
+	char                            *name_string;
+	u32                              size_needed;
+
+	ACPI_FUNCTION_TRACE ("ex_allocate_name_string");
+
+
+	/*
+	 * Allow room for all \ and ^ prefixes, all segments, and a multi_name_prefix.
+	 * Also, one byte for the null terminator.
+	 * This may actually be somewhat longer than needed.
+	 */
+	if (prefix_count == ACPI_UINT32_MAX) {
+		/* Special case for root */
+
+		size_needed = 1 + (ACPI_NAME_SIZE * num_name_segs) + 2 + 1;
+	}
+	else {
+		size_needed = prefix_count + (ACPI_NAME_SIZE * num_name_segs) + 2 + 1;
+	}
+
+	/*
+	 * Allocate a buffer for the name.
+	 * This buffer must be deleted by the caller!
+	 */
+	name_string = ACPI_MEM_ALLOCATE (size_needed);
+	if (!name_string) {
+		ACPI_REPORT_ERROR (("ex_allocate_name_string: Could not allocate size %d\n", size_needed));
+		return_PTR (NULL);
+	}
+
+	temp_ptr = name_string;
+
+	/* Set up Root or Parent prefixes if needed */
+
+	if (prefix_count == ACPI_UINT32_MAX) {
+		*temp_ptr++ = AML_ROOT_PREFIX;
+	}
+	else {
+		while (prefix_count--) {
+			*temp_ptr++ = AML_PARENT_PREFIX;
+		}
+	}
+
+
+	/* Set up Dual or Multi prefixes if needed */
+
+	if (num_name_segs > 2) {
+		/* Set up multi prefixes   */
+
+		*temp_ptr++ = AML_MULTI_NAME_PREFIX_OP;
+		*temp_ptr++ = (char) num_name_segs;
+	}
+	else if (2 == num_name_segs) {
+		/* Set up dual prefixes */
+
+		*temp_ptr++ = AML_DUAL_NAME_PREFIX;
+	}
+
+	/*
+	 * Terminate string following prefixes. acpi_ex_name_segment() will
+	 * append the segment(s)
+	 */
+	*temp_ptr = 0;
+
+	return_PTR (name_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_name_segment
+ *
+ * PARAMETERS:  interpreter_mode    - Current running mode (load1/Load2/Exec)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute a name segment (4 bytes)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_name_segment (
+	u8                              **in_aml_address,
+	char                            *name_string)
+{
+	char                            *aml_address = (void *) *in_aml_address;
+	acpi_status                     status = AE_OK;
+	u32                             index;
+	char                            char_buf[5];
+
+
+	ACPI_FUNCTION_TRACE ("ex_name_segment");
+
+
+	/*
+	 * If first character is a digit, then we know that we aren't looking at a
+	 * valid name segment
+	 */
+	char_buf[0] = *aml_address;
+
+	if ('0' <= char_buf[0] && char_buf[0] <= '9') {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "leading digit: %c\n", char_buf[0]));
+		return_ACPI_STATUS (AE_CTRL_PENDING);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "Bytes from stream:\n"));
+
+	for (index = 0;
+		(index < ACPI_NAME_SIZE) && (acpi_ut_valid_acpi_character (*aml_address));
+		index++) {
+		char_buf[index] = *aml_address++;
+		ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "%c\n", char_buf[index]));
+	}
+
+
+	/* Valid name segment  */
+
+	if (index == 4) {
+		/* Found 4 valid characters */
+
+		char_buf[4] = '\0';
+
+		if (name_string) {
+			ACPI_STRCAT (name_string, char_buf);
+			ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
+				"Appended to - %s \n", name_string));
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
+				"No Name string - %s \n", char_buf));
+		}
+	}
+	else if (index == 0) {
+		/*
+		 * First character was not a valid name character,
+		 * so we are looking at something other than a name.
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+			"Leading character is not alpha: %02Xh (not a name)\n",
+			char_buf[0]));
+		status = AE_CTRL_PENDING;
+	}
+	else {
+		/* Segment started with one or more valid characters, but fewer than 4 */
+
+		status = AE_AML_BAD_NAME;
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Bad character %02x in name, at %p\n",
+			*aml_address, aml_address));
+	}
+
+	*in_aml_address = (u8 *) aml_address;
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_get_name_string
+ *
+ * PARAMETERS:  data_type           - Data type to be associated with this name
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get a name, including any prefixes.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_get_name_string (
+	acpi_object_type                data_type,
+	u8                              *in_aml_address,
+	char                            **out_name_string,
+	u32                             *out_name_length)
+{
+	acpi_status                     status = AE_OK;
+	u8                              *aml_address = in_aml_address;
+	char                            *name_string = NULL;
+	u32                             num_segments;
+	u32                             prefix_count = 0;
+	u8                              has_prefix = FALSE;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_get_name_string", aml_address);
+
+
+	if (ACPI_TYPE_LOCAL_REGION_FIELD == data_type  ||
+		ACPI_TYPE_LOCAL_BANK_FIELD == data_type    ||
+		ACPI_TYPE_LOCAL_INDEX_FIELD == data_type) {
+		/* Disallow prefixes for types associated with field_unit names */
+
+		name_string = acpi_ex_allocate_name_string (0, 1);
+		if (!name_string) {
+			status = AE_NO_MEMORY;
+		}
+		else {
+			status = acpi_ex_name_segment (&aml_address, name_string);
+		}
+	}
+	else {
+		/*
+		 * data_type is not a field name.
+		 * Examine first character of name for root or parent prefix operators
+		 */
+		switch (*aml_address) {
+		case AML_ROOT_PREFIX:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "root_prefix(\\) at %p\n", aml_address));
+
+			/*
+			 * Remember that we have a root_prefix --
+			 * see comment in acpi_ex_allocate_name_string()
+			 */
+			aml_address++;
+			prefix_count = ACPI_UINT32_MAX;
+			has_prefix = TRUE;
+			break;
+
+
+		case AML_PARENT_PREFIX:
+
+			/* Increment past possibly multiple parent prefixes */
+
+			do {
+				ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "parent_prefix (^) at %p\n", aml_address));
+
+				aml_address++;
+				prefix_count++;
+
+			} while (*aml_address == AML_PARENT_PREFIX);
+
+			has_prefix = TRUE;
+			break;
+
+
+		default:
+
+			/* Not a prefix character */
+
+			break;
+		}
+
+
+		/* Examine first character of name for name segment prefix operator */
+
+		switch (*aml_address) {
+		case AML_DUAL_NAME_PREFIX:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "dual_name_prefix at %p\n", aml_address));
+
+			aml_address++;
+			name_string = acpi_ex_allocate_name_string (prefix_count, 2);
+			if (!name_string) {
+				status = AE_NO_MEMORY;
+				break;
+			}
+
+			/* Indicate that we processed a prefix */
+
+			has_prefix = TRUE;
+
+			status = acpi_ex_name_segment (&aml_address, name_string);
+			if (ACPI_SUCCESS (status)) {
+				status = acpi_ex_name_segment (&aml_address, name_string);
+			}
+			break;
+
+
+		case AML_MULTI_NAME_PREFIX_OP:
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_LOAD, "multi_name_prefix at %p\n", aml_address));
+
+			/* Fetch count of segments remaining in name path */
+
+			aml_address++;
+			num_segments = *aml_address;
+
+			name_string = acpi_ex_allocate_name_string (prefix_count, num_segments);
+			if (!name_string) {
+				status = AE_NO_MEMORY;
+				break;
+			}
+
+			/* Indicate that we processed a prefix */
+
+			aml_address++;
+			has_prefix = TRUE;
+
+			while (num_segments &&
+					(status = acpi_ex_name_segment (&aml_address, name_string)) == AE_OK) {
+				num_segments--;
+			}
+
+			break;
+
+
+		case 0:
+
+			/* null_name valid as of 8-12-98 ASL/AML Grammar Update */
+
+			if (prefix_count == ACPI_UINT32_MAX) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "name_seg is \"\\\" followed by NULL\n"));
+			}
+
+			/* Consume the NULL byte */
+
+			aml_address++;
+			name_string = acpi_ex_allocate_name_string (prefix_count, 0);
+			if (!name_string) {
+				status = AE_NO_MEMORY;
+				break;
+			}
+
+			break;
+
+
+		default:
+
+			/* Name segment string */
+
+			name_string = acpi_ex_allocate_name_string (prefix_count, 1);
+			if (!name_string) {
+				status = AE_NO_MEMORY;
+				break;
+			}
+
+			status = acpi_ex_name_segment (&aml_address, name_string);
+			break;
+		}
+	}
+
+	if (AE_CTRL_PENDING == status && has_prefix) {
+		/* Ran out of segments after processing a prefix */
+
+		ACPI_REPORT_ERROR (
+			("ex_do_name: Malformed Name at %p\n", name_string));
+		status = AE_AML_BAD_NAME;
+	}
+
+	*out_name_string = name_string;
+	*out_name_length = (u32) (aml_address - in_aml_address);
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exoparg1.c b/drivers/acpi/executer/exoparg1.c
new file mode 100644
index 0000000..8482aef
--- /dev/null
+++ b/drivers/acpi/executer/exoparg1.c
@@ -0,0 +1,1013 @@
+
+/******************************************************************************
+ *
+ * Module Name: exoparg1 - AML execution - opcodes with 1 argument
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exoparg1")
+
+
+/*!
+ * Naming convention for AML interpreter execution routines.
+ *
+ * The routines that begin execution of AML opcodes are named with a common
+ * convention based upon the number of arguments, the number of target operands,
+ * and whether or not a value is returned:
+ *
+ *      AcpiExOpcode_xA_yT_zR
+ *
+ * Where:
+ *
+ * xA - ARGUMENTS:    The number of arguments (input operands) that are
+ *                    required for this opcode type (0 through 6 args).
+ * yT - TARGETS:      The number of targets (output operands) that are required
+ *                    for this opcode type (0, 1, or 2 targets).
+ * zR - RETURN VALUE: Indicates whether this opcode type returns a value
+ *                    as the function return (0 or 1).
+ *
+ * The AcpiExOpcode* functions are called via the Dispatcher component with
+ * fully resolved operands.
+!*/
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_0A_0T_1R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute operator with no operands, one return value
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_0A_0T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *return_desc = NULL;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_0A_0T_1R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_TIMER_OP:      /*  Timer () */
+
+		/* Create a return object of type Integer */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		return_desc->integer.value = acpi_os_get_timer ();
+		break;
+
+	default:                /*  Unknown opcode  */
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_0A_0T_1R: Unknown opcode %X\n",
+			walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+cleanup:
+
+	if (!walk_state->result_obj) {
+		walk_state->result_obj = return_desc;
+	}
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (return_desc);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_0T_0R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute Type 1 monadic operator with numeric operand on
+ *              object stack
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_1A_0T_0R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_0T_0R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_RELEASE_OP:    /*  Release (mutex_object) */
+
+		status = acpi_ex_release_mutex (operand[0], walk_state);
+		break;
+
+
+	case AML_RESET_OP:      /*  Reset (event_object) */
+
+		status = acpi_ex_system_reset_event (operand[0]);
+		break;
+
+
+	case AML_SIGNAL_OP:     /*  Signal (event_object) */
+
+		status = acpi_ex_system_signal_event (operand[0]);
+		break;
+
+
+	case AML_SLEEP_OP:      /*  Sleep (msec_time) */
+
+		status = acpi_ex_system_do_suspend (operand[0]->integer.value);
+		break;
+
+
+	case AML_STALL_OP:      /*  Stall (usec_time) */
+
+		status = acpi_ex_system_do_stall ((u32) operand[0]->integer.value);
+		break;
+
+
+	case AML_UNLOAD_OP:     /*  Unload (Handle) */
+
+		status = acpi_ex_unload_table (operand[0]);
+		break;
+
+
+	default:                /*  Unknown opcode  */
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_0T_0R: Unknown opcode %X\n",
+			walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_1T_0R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with one argument, one target, and no
+ *              return value.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_1A_1T_0R (
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_1T_0R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_LOAD_OP:
+
+		status = acpi_ex_load_op (operand[0], operand[1], walk_state);
+		break;
+
+	default:                        /* Unknown opcode */
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_1T_0R: Unknown opcode %X\n",
+			walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+
+cleanup:
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_1T_1R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with one argument, one target, and a
+ *              return value.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_1A_1T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *return_desc = NULL;
+	union acpi_operand_object       *return_desc2 = NULL;
+	u32                             temp32;
+	u32                             i;
+	acpi_integer                    power_of_ten;
+	acpi_integer                    digit;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_1T_1R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_BIT_NOT_OP:
+	case AML_FIND_SET_LEFT_BIT_OP:
+	case AML_FIND_SET_RIGHT_BIT_OP:
+	case AML_FROM_BCD_OP:
+	case AML_TO_BCD_OP:
+	case AML_COND_REF_OF_OP:
+
+		/* Create a return object of type Integer for these opcodes */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		switch (walk_state->opcode) {
+		case AML_BIT_NOT_OP:            /* Not (Operand, Result)  */
+
+			return_desc->integer.value = ~operand[0]->integer.value;
+			break;
+
+
+		case AML_FIND_SET_LEFT_BIT_OP:  /* find_set_left_bit (Operand, Result) */
+
+			return_desc->integer.value = operand[0]->integer.value;
+
+			/*
+			 * Acpi specification describes Integer type as a little
+			 * endian unsigned value, so this boundary condition is valid.
+			 */
+			for (temp32 = 0; return_desc->integer.value &&
+					   temp32 < ACPI_INTEGER_BIT_SIZE; ++temp32) {
+				return_desc->integer.value >>= 1;
+			}
+
+			return_desc->integer.value = temp32;
+			break;
+
+
+		case AML_FIND_SET_RIGHT_BIT_OP: /* find_set_right_bit (Operand, Result) */
+
+			return_desc->integer.value = operand[0]->integer.value;
+
+			/*
+			 * The Acpi specification describes Integer type as a little
+			 * endian unsigned value, so this boundary condition is valid.
+			 */
+			for (temp32 = 0; return_desc->integer.value &&
+					   temp32 < ACPI_INTEGER_BIT_SIZE; ++temp32) {
+				return_desc->integer.value <<= 1;
+			}
+
+			/* Since the bit position is one-based, subtract from 33 (65) */
+
+			return_desc->integer.value = temp32 == 0 ? 0 :
+					  (ACPI_INTEGER_BIT_SIZE + 1) - temp32;
+			break;
+
+
+		case AML_FROM_BCD_OP:           /* from_bcd (BCDValue, Result) */
+
+			/*
+			 * The 64-bit ACPI integer can hold 16 4-bit BCD characters
+			 * (if table is 32-bit, integer can hold 8 BCD characters)
+			 * Convert each 4-bit BCD value
+			 */
+			power_of_ten = 1;
+			return_desc->integer.value = 0;
+			digit = operand[0]->integer.value;
+
+			/* Convert each BCD digit (each is one nybble wide) */
+
+			for (i = 0; (i < acpi_gbl_integer_nybble_width) && (digit > 0); i++) {
+				/* Get the least significant 4-bit BCD digit */
+
+				temp32 = ((u32) digit) & 0xF;
+
+				/* Check the range of the digit */
+
+				if (temp32 > 9) {
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"BCD digit too large (not decimal): 0x%X\n",
+						temp32));
+
+					status = AE_AML_NUMERIC_OVERFLOW;
+					goto cleanup;
+				}
+
+				/* Sum the digit into the result with the current power of 10 */
+
+				return_desc->integer.value += (((acpi_integer) temp32) *
+						 power_of_ten);
+
+				/* Shift to next BCD digit */
+
+				digit >>= 4;
+
+				/* Next power of 10 */
+
+				power_of_ten *= 10;
+			}
+			break;
+
+
+		case AML_TO_BCD_OP:             /* to_bcd (Operand, Result) */
+
+			return_desc->integer.value = 0;
+			digit = operand[0]->integer.value;
+
+			/* Each BCD digit is one nybble wide */
+
+			for (i = 0; (i < acpi_gbl_integer_nybble_width) && (digit > 0); i++) {
+				(void) acpi_ut_short_divide (digit, 10, &digit, &temp32);
+
+				/* Insert the BCD digit that resides in the remainder from above */
+
+				return_desc->integer.value |= (((acpi_integer) temp32) <<
+						   ACPI_MUL_4 (i));
+			}
+
+			/* Overflow if there is any data left in Digit */
+
+			if (digit > 0) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Integer too large to convert to BCD: %8.8X%8.8X\n",
+					ACPI_FORMAT_UINT64 (operand[0]->integer.value)));
+				status = AE_AML_NUMERIC_OVERFLOW;
+				goto cleanup;
+			}
+			break;
+
+
+		case AML_COND_REF_OF_OP:        /* cond_ref_of (source_object, Result) */
+
+			/*
+			 * This op is a little strange because the internal return value is
+			 * different than the return value stored in the result descriptor
+			 * (There are really two return values)
+			 */
+			if ((struct acpi_namespace_node *) operand[0] == acpi_gbl_root_node) {
+				/*
+				 * This means that the object does not exist in the namespace,
+				 * return FALSE
+				 */
+				return_desc->integer.value = 0;
+				goto cleanup;
+			}
+
+			/* Get the object reference, store it, and remove our reference */
+
+			status = acpi_ex_get_object_reference (operand[0], &return_desc2, walk_state);
+			if (ACPI_FAILURE (status)) {
+				goto cleanup;
+			}
+
+			status = acpi_ex_store (return_desc2, operand[1], walk_state);
+			acpi_ut_remove_reference (return_desc2);
+
+			/* The object exists in the namespace, return TRUE */
+
+			return_desc->integer.value = ACPI_INTEGER_MAX;
+			goto cleanup;
+
+
+		default:
+			/* No other opcodes get here */
+			break;
+		}
+		break;
+
+
+	case AML_STORE_OP:              /* Store (Source, Target) */
+
+		/*
+		 * A store operand is typically a number, string, buffer or lvalue
+		 * Be careful about deleting the source object,
+		 * since the object itself may have been stored.
+		 */
+		status = acpi_ex_store (operand[0], operand[1], walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* It is possible that the Store already produced a return object */
+
+		if (!walk_state->result_obj) {
+			/*
+			 * Normally, we would remove a reference on the Operand[0] parameter;
+			 * But since it is being used as the internal return object
+			 * (meaning we would normally increment it), the two cancel out,
+			 * and we simply don't do anything.
+			 */
+			walk_state->result_obj = operand[0];
+			walk_state->operands[0] = NULL; /* Prevent deletion */
+		}
+		return_ACPI_STATUS (status);
+
+
+	/*
+	 * ACPI 2.0 Opcodes
+	 */
+	case AML_COPY_OP:               /* Copy (Source, Target) */
+
+		status = acpi_ut_copy_iobject_to_iobject (operand[0], &return_desc,
+				 walk_state);
+		break;
+
+
+	case AML_TO_DECSTRING_OP:       /* to_decimal_string (Data, Result) */
+
+		status = acpi_ex_convert_to_string (operand[0], &return_desc,
+				 ACPI_EXPLICIT_CONVERT_DECIMAL);
+		if (return_desc == operand[0]) {
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference (return_desc);
+		}
+		break;
+
+
+	case AML_TO_HEXSTRING_OP:       /* to_hex_string (Data, Result) */
+
+		status = acpi_ex_convert_to_string (operand[0], &return_desc,
+				 ACPI_EXPLICIT_CONVERT_HEX);
+		if (return_desc == operand[0]) {
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference (return_desc);
+		}
+		break;
+
+
+	case AML_TO_BUFFER_OP:          /* to_buffer (Data, Result) */
+
+		status = acpi_ex_convert_to_buffer (operand[0], &return_desc);
+		if (return_desc == operand[0]) {
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference (return_desc);
+		}
+		break;
+
+
+	case AML_TO_INTEGER_OP:         /* to_integer (Data, Result) */
+
+		status = acpi_ex_convert_to_integer (operand[0], &return_desc,
+				 ACPI_ANY_BASE);
+		if (return_desc == operand[0]) {
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference (return_desc);
+		}
+		break;
+
+
+	case AML_SHIFT_LEFT_BIT_OP:     /* shift_left_bit (Source, bit_num) */
+	case AML_SHIFT_RIGHT_BIT_OP:    /* shift_right_bit (Source, bit_num) */
+
+		/*
+		 * These are two obsolete opcodes
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"%s is obsolete and not implemented\n",
+			acpi_ps_get_opcode_name (walk_state->opcode)));
+		status = AE_SUPPORT;
+		goto cleanup;
+
+
+	default:                        /* Unknown opcode */
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_1T_1R: Unknown opcode %X\n",
+			walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+	if (ACPI_SUCCESS (status)) {
+		/*
+		 * Store the return value computed above into the target object
+		 */
+		status = acpi_ex_store (return_desc, operand[1], walk_state);
+	}
+
+
+cleanup:
+
+	if (!walk_state->result_obj) {
+		walk_state->result_obj = return_desc;
+	}
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (return_desc);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_0T_1R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with one argument, no target, and a return value
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_1A_0T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *temp_desc;
+	union acpi_operand_object       *return_desc = NULL;
+	acpi_status                     status = AE_OK;
+	u32                             type;
+	acpi_integer                    value;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_0T_1R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_LNOT_OP:               /* LNot (Operand) */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/*
+		 * Set result to ONES (TRUE) if Value == 0.  Note:
+		 * return_desc->Integer.Value is initially == 0 (FALSE) from above.
+		 */
+		if (!operand[0]->integer.value) {
+			return_desc->integer.value = ACPI_INTEGER_MAX;
+		}
+		break;
+
+
+	case AML_DECREMENT_OP:          /* Decrement (Operand)  */
+	case AML_INCREMENT_OP:          /* Increment (Operand)  */
+
+		/*
+		 * Create a new integer.  Can't just get the base integer and
+		 * increment it because it may be an Arg or Field.
+		 */
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/*
+		 * Since we are expecting a Reference operand, it can be either a
+		 * NS Node or an internal object.
+		 */
+		temp_desc = operand[0];
+		if (ACPI_GET_DESCRIPTOR_TYPE (temp_desc) == ACPI_DESC_TYPE_OPERAND) {
+			/* Internal reference object - prevent deletion */
+
+			acpi_ut_add_reference (temp_desc);
+		}
+
+		/*
+		 * Convert the Reference operand to an Integer (This removes a
+		 * reference on the Operand[0] object)
+		 *
+		 * NOTE:  We use LNOT_OP here in order to force resolution of the
+		 * reference operand to an actual integer.
+		 */
+		status = acpi_ex_resolve_operands (AML_LNOT_OP, &temp_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "%s: bad operand(s) %s\n",
+				acpi_ps_get_opcode_name (walk_state->opcode),
+				acpi_format_exception(status)));
+
+			goto cleanup;
+		}
+
+		/*
+		 * temp_desc is now guaranteed to be an Integer object --
+		 * Perform the actual increment or decrement
+		 */
+		if (walk_state->opcode == AML_INCREMENT_OP) {
+			return_desc->integer.value = temp_desc->integer.value +1;
+		}
+		else {
+			return_desc->integer.value = temp_desc->integer.value -1;
+		}
+
+		/* Finished with this Integer object */
+
+		acpi_ut_remove_reference (temp_desc);
+
+		/*
+		 * Store the result back (indirectly) through the original
+		 * Reference object
+		 */
+		status = acpi_ex_store (return_desc, operand[0], walk_state);
+		break;
+
+
+	case AML_TYPE_OP:               /* object_type (source_object) */
+
+		/*
+		 * Note: The operand is not resolved at this point because we want to
+		 * get the associated object, not its value.  For example, we don't want
+		 * to resolve a field_unit to its value, we want the actual field_unit
+		 * object.
+		 */
+
+		/* Get the type of the base object */
+
+		status = acpi_ex_resolve_multiple (walk_state, operand[0], &type, NULL);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+		/* Allocate a descriptor to hold the type. */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		return_desc->integer.value = type;
+		break;
+
+
+	case AML_SIZE_OF_OP:            /* size_of (source_object) */
+
+		/*
+		 * Note: The operand is not resolved at this point because we want to
+		 * get the associated object, not its value.
+		 */
+
+		/* Get the base object */
+
+		status = acpi_ex_resolve_multiple (walk_state, operand[0], &type, &temp_desc);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		/*
+		 * The type of the base object must be integer, buffer, string, or
+		 * package.  All others are not supported.
+		 *
+		 * NOTE: Integer is not specifically supported by the ACPI spec,
+		 * but is supported implicitly via implicit operand conversion.
+		 * rather than bother with conversion, we just use the byte width
+		 * global (4 or 8 bytes).
+		 */
+		switch (type) {
+		case ACPI_TYPE_INTEGER:
+			value = acpi_gbl_integer_byte_width;
+			break;
+
+		case ACPI_TYPE_BUFFER:
+			value = temp_desc->buffer.length;
+			break;
+
+		case ACPI_TYPE_STRING:
+			value = temp_desc->string.length;
+			break;
+
+		case ACPI_TYPE_PACKAGE:
+			value = temp_desc->package.count;
+			break;
+
+		default:
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"size_of - Operand is not Buf/Int/Str/Pkg - found type %s\n",
+				acpi_ut_get_type_name (type)));
+			status = AE_AML_OPERAND_TYPE;
+			goto cleanup;
+		}
+
+		/*
+		 * Now that we have the size of the object, create a result
+		 * object to hold the value
+		 */
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		return_desc->integer.value = value;
+		break;
+
+
+	case AML_REF_OF_OP:             /* ref_of (source_object) */
+
+		status = acpi_ex_get_object_reference (operand[0], &return_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+		break;
+
+
+	case AML_DEREF_OF_OP:           /* deref_of (obj_reference | String) */
+
+		/* Check for a method local or argument, or standalone String */
+
+		if (ACPI_GET_DESCRIPTOR_TYPE (operand[0]) != ACPI_DESC_TYPE_NAMED) {
+			switch (ACPI_GET_OBJECT_TYPE (operand[0])) {
+			case ACPI_TYPE_LOCAL_REFERENCE:
+				/*
+				 * This is a deref_of (local_x | arg_x)
+				 *
+				 * Must resolve/dereference the local/arg reference first
+				 */
+				switch (operand[0]->reference.opcode) {
+				case AML_LOCAL_OP:
+				case AML_ARG_OP:
+
+					/* Set Operand[0] to the value of the local/arg */
+
+					status = acpi_ds_method_data_get_value (operand[0]->reference.opcode,
+							 operand[0]->reference.offset, walk_state, &temp_desc);
+					if (ACPI_FAILURE (status)) {
+						goto cleanup;
+					}
+
+					/*
+					 * Delete our reference to the input object and
+					 * point to the object just retrieved
+					 */
+					acpi_ut_remove_reference (operand[0]);
+					operand[0] = temp_desc;
+					break;
+
+				case AML_REF_OF_OP:
+
+					/* Get the object to which the reference refers */
+
+					temp_desc = operand[0]->reference.object;
+					acpi_ut_remove_reference (operand[0]);
+					operand[0] = temp_desc;
+					break;
+
+				default:
+
+					/* Must be an Index op - handled below */
+					break;
+				}
+				break;
+
+
+			case ACPI_TYPE_STRING:
+
+				/*
+				 * This is a deref_of (String). The string is a reference to a named ACPI object.
+				 *
+				 * 1) Find the owning Node
+				 * 2) Dereference the node to an actual object.  Could be a Field, so we nee
+				 *    to resolve the node to a value.
+				 */
+				status = acpi_ns_get_node_by_path (operand[0]->string.pointer,
+						  walk_state->scope_info->scope.node, ACPI_NS_SEARCH_PARENT,
+						  ACPI_CAST_INDIRECT_PTR (struct acpi_namespace_node, &return_desc));
+				if (ACPI_FAILURE (status)) {
+					goto cleanup;
+				}
+
+				status = acpi_ex_resolve_node_to_value (
+						  ACPI_CAST_INDIRECT_PTR (struct acpi_namespace_node, &return_desc), walk_state);
+				goto cleanup;
+
+
+			default:
+
+				status = AE_AML_OPERAND_TYPE;
+				goto cleanup;
+			}
+		}
+
+		/* Operand[0] may have changed from the code above */
+
+		if (ACPI_GET_DESCRIPTOR_TYPE (operand[0]) == ACPI_DESC_TYPE_NAMED) {
+			/*
+			 * This is a deref_of (object_reference)
+			 * Get the actual object from the Node (This is the dereference).
+			 * -- This case may only happen when a local_x or arg_x is dereferenced above.
+			 */
+			return_desc = acpi_ns_get_attached_object ((struct acpi_namespace_node *) operand[0]);
+		}
+		else {
+			/*
+			 * This must be a reference object produced by either the Index() or
+			 * ref_of() operator
+			 */
+			switch (operand[0]->reference.opcode) {
+			case AML_INDEX_OP:
+
+				/*
+				 * The target type for the Index operator must be
+				 * either a Buffer or a Package
+				 */
+				switch (operand[0]->reference.target_type) {
+				case ACPI_TYPE_BUFFER_FIELD:
+
+					temp_desc = operand[0]->reference.object;
+
+					/*
+					 * Create a new object that contains one element of the
+					 * buffer -- the element pointed to by the index.
+					 *
+					 * NOTE: index into a buffer is NOT a pointer to a
+					 * sub-buffer of the main buffer, it is only a pointer to a
+					 * single element (byte) of the buffer!
+					 */
+					return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+					if (!return_desc) {
+						status = AE_NO_MEMORY;
+						goto cleanup;
+					}
+
+					/*
+					 * Since we are returning the value of the buffer at the
+					 * indexed location, we don't need to add an additional
+					 * reference to the buffer itself.
+					 */
+					return_desc->integer.value =
+						temp_desc->buffer.pointer[operand[0]->reference.offset];
+					break;
+
+
+				case ACPI_TYPE_PACKAGE:
+
+					/*
+					 * Return the referenced element of the package.  We must add
+					 * another reference to the referenced object, however.
+					 */
+					return_desc = *(operand[0]->reference.where);
+					if (!return_desc) {
+						/*
+						 * We can't return a NULL dereferenced value.  This is
+						 * an uninitialized package element and is thus a
+						 * severe error.
+						 */
+						ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+							"NULL package element obj %p\n",
+							operand[0]));
+						status = AE_AML_UNINITIALIZED_ELEMENT;
+						goto cleanup;
+					}
+
+					acpi_ut_add_reference (return_desc);
+					break;
+
+
+				default:
+
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"Unknown Index target_type %X in obj %p\n",
+						operand[0]->reference.target_type, operand[0]));
+					status = AE_AML_OPERAND_TYPE;
+					goto cleanup;
+				}
+				break;
+
+
+			case AML_REF_OF_OP:
+
+				return_desc = operand[0]->reference.object;
+
+				if (ACPI_GET_DESCRIPTOR_TYPE (return_desc) == ACPI_DESC_TYPE_NAMED) {
+
+					return_desc = acpi_ns_get_attached_object ((struct acpi_namespace_node *) return_desc);
+				}
+
+				/* Add another reference to the object! */
+
+				acpi_ut_add_reference (return_desc);
+				break;
+
+
+			default:
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Unknown opcode in ref(%p) - %X\n",
+					operand[0], operand[0]->reference.opcode));
+
+				status = AE_TYPE;
+				goto cleanup;
+			}
+		}
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_0T_1R: Unknown opcode %X\n",
+			walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (return_desc);
+	}
+
+	walk_state->result_obj = return_desc;
+	return_ACPI_STATUS (status);
+}
+
diff --git a/drivers/acpi/executer/exoparg2.c b/drivers/acpi/executer/exoparg2.c
new file mode 100644
index 0000000..8be4d80
--- /dev/null
+++ b/drivers/acpi/executer/exoparg2.c
@@ -0,0 +1,608 @@
+/******************************************************************************
+ *
+ * Module Name: exoparg2 - AML execution - opcodes with 2 arguments
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/acinterp.h>
+#include <acpi/acevents.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exoparg2")
+
+
+/*!
+ * Naming convention for AML interpreter execution routines.
+ *
+ * The routines that begin execution of AML opcodes are named with a common
+ * convention based upon the number of arguments, the number of target operands,
+ * and whether or not a value is returned:
+ *
+ *      AcpiExOpcode_xA_yT_zR
+ *
+ * Where:
+ *
+ * xA - ARGUMENTS:    The number of arguments (input operands) that are
+ *                    required for this opcode type (1 through 6 args).
+ * yT - TARGETS:      The number of targets (output operands) that are required
+ *                    for this opcode type (0, 1, or 2 targets).
+ * zR - RETURN VALUE: Indicates whether this opcode type returns a value
+ *                    as the function return (0 or 1).
+ *
+ * The AcpiExOpcode* functions are called via the Dispatcher component with
+ * fully resolved operands.
+!*/
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_2A_0T_0R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with two arguments, no target, and no return
+ *              value.
+ *
+ * ALLOCATION:  Deletes both operands
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_2A_0T_0R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	struct acpi_namespace_node      *node;
+	u32                             value;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_0T_0R",
+			acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/* Examine the opcode */
+
+	switch (walk_state->opcode) {
+	case AML_NOTIFY_OP:         /* Notify (notify_object, notify_value) */
+
+		/* The first operand is a namespace node */
+
+		node = (struct acpi_namespace_node *) operand[0];
+
+		/* Second value is the notify value */
+
+		value = (u32) operand[1]->integer.value;
+
+		/* Notifies allowed on this object? */
+
+		if (!acpi_ev_is_notify_object (node)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Unexpected notify object type [%s]\n",
+					acpi_ut_get_type_name (node->type)));
+
+			status = AE_AML_OPERAND_TYPE;
+			break;
+		}
+
+#ifdef ACPI_GPE_NOTIFY_CHECK
+		/*
+		 * GPE method wake/notify check.  Here, we want to ensure that we
+		 * don't receive any "device_wake" Notifies from a GPE _Lxx or _Exx
+		 * GPE method during system runtime.  If we do, the GPE is marked
+		 * as "wake-only" and disabled.
+		 *
+		 * 1) Is the Notify() value == device_wake?
+		 * 2) Is this a GPE deferred method?  (An _Lxx or _Exx method)
+		 * 3) Did the original GPE happen at system runtime?
+		 *    (versus during wake)
+		 *
+		 * If all three cases are true, this is a wake-only GPE that should
+		 * be disabled at runtime.
+		 */
+		if (value == 2)     /* device_wake */ {
+			status = acpi_ev_check_for_wake_only_gpe (walk_state->gpe_event_info);
+			if (ACPI_FAILURE (status)) {
+				/* AE_WAKE_ONLY_GPE only error, means ignore this notify */
+
+				return_ACPI_STATUS (AE_OK)
+			}
+		}
+#endif
+
+		/*
+		 * Dispatch the notify to the appropriate handler
+		 * NOTE: the request is queued for execution after this method
+		 * completes.  The notify handlers are NOT invoked synchronously
+		 * from this thread -- because handlers may in turn run other
+		 * control methods.
+		 */
+		status = acpi_ev_queue_notify_request (node, value);
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_0T_0R: Unknown opcode %X\n",
+				walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_2A_2T_1R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute a dyadic operator (2 operands) with 2 output targets
+ *              and one implicit return value.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_2A_2T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *return_desc1 = NULL;
+	union acpi_operand_object       *return_desc2 = NULL;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_2T_1R",
+		acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/*
+	 * Execute the opcode
+	 */
+	switch (walk_state->opcode) {
+	case AML_DIVIDE_OP:             /* Divide (Dividend, Divisor, remainder_result quotient_result) */
+
+		return_desc1 = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc1) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		return_desc2 = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc2) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/* Quotient to return_desc1, remainder to return_desc2 */
+
+		status = acpi_ut_divide (operand[0]->integer.value,
+				   operand[1]->integer.value,
+				   &return_desc1->integer.value,
+				   &return_desc2->integer.value);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_2T_1R: Unknown opcode %X\n",
+				walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+
+	/* Store the results to the target reference operands */
+
+	status = acpi_ex_store (return_desc2, operand[2], walk_state);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	status = acpi_ex_store (return_desc1, operand[3], walk_state);
+	if (ACPI_FAILURE (status)) {
+		goto cleanup;
+	}
+
+	/* Return the remainder */
+
+	walk_state->result_obj = return_desc1;
+
+
+cleanup:
+	/*
+	 * Since the remainder is not returned indirectly, remove a reference to
+	 * it. Only the quotient is returned indirectly.
+	 */
+	acpi_ut_remove_reference (return_desc2);
+
+	if (ACPI_FAILURE (status)) {
+		/* Delete the return object */
+
+		acpi_ut_remove_reference (return_desc1);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_2A_1T_1R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with two arguments, one target, and a return
+ *              value.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_2A_1T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *return_desc = NULL;
+	u32                             index;
+	acpi_status                     status = AE_OK;
+	acpi_size                       length;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_1T_1R",
+		acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/*
+	 * Execute the opcode
+	 */
+	if (walk_state->op_info->flags & AML_MATH) {
+		/* All simple math opcodes (add, etc.) */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		return_desc->integer.value = acpi_ex_do_math_op (walk_state->opcode,
+				  operand[0]->integer.value,
+				  operand[1]->integer.value);
+		goto store_result_to_target;
+	}
+
+
+	switch (walk_state->opcode) {
+	case AML_MOD_OP:                /* Mod (Dividend, Divisor, remainder_result (ACPI 2.0) */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/* return_desc will contain the remainder */
+
+		status = acpi_ut_divide (operand[0]->integer.value,
+				   operand[1]->integer.value,
+				   NULL,
+				   &return_desc->integer.value);
+		break;
+
+
+	case AML_CONCAT_OP:             /* Concatenate (Data1, Data2, Result) */
+
+		status = acpi_ex_do_concatenate (operand[0], operand[1],
+				 &return_desc, walk_state);
+		break;
+
+
+	case AML_TO_STRING_OP:          /* to_string (Buffer, Length, Result) (ACPI 2.0) */
+
+		/*
+		 * Input object is guaranteed to be a buffer at this point (it may have
+		 * been converted.)  Copy the raw buffer data to a new object of type String.
+		 */
+
+		/*
+		 * Get the length of the new string. It is the smallest of:
+		 * 1) Length of the input buffer
+		 * 2) Max length as specified in the to_string operator
+		 * 3) Length of input buffer up to a zero byte (null terminator)
+		 *
+		 * NOTE: A length of zero is ok, and will create a zero-length, null
+		 *       terminated string.
+		 */
+		length = 0;
+		while ((length < operand[0]->buffer.length) &&
+			   (length < operand[1]->integer.value) &&
+			   (operand[0]->buffer.pointer[length])) {
+			length++;
+			if (length > ACPI_MAX_STRING_CONVERSION) {
+				status = AE_AML_STRING_LIMIT;
+				goto cleanup;
+			}
+		}
+
+		/* Allocate a new string object */
+
+		return_desc = acpi_ut_create_string_object (length);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/* Copy the raw buffer data with no transform. NULL terminated already. */
+
+		ACPI_MEMCPY (return_desc->string.pointer,
+			operand[0]->buffer.pointer, length);
+		break;
+
+
+	case AML_CONCAT_RES_OP:         /* concatenate_res_template (Buffer, Buffer, Result) (ACPI 2.0) */
+
+		status = acpi_ex_concat_template (operand[0], operand[1],
+				 &return_desc, walk_state);
+		break;
+
+
+	case AML_INDEX_OP:              /* Index (Source Index Result) */
+
+		/* Create the internal return object */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_LOCAL_REFERENCE);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		index = (u32) operand[1]->integer.value;
+
+		/*
+		 * At this point, the Source operand is a Package, Buffer, or String
+		 */
+		if (ACPI_GET_OBJECT_TYPE (operand[0]) == ACPI_TYPE_PACKAGE) {
+			/* Object to be indexed is a Package */
+
+			if (index >= operand[0]->package.count) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Index value (%X) beyond package end (%X)\n",
+					index, operand[0]->package.count));
+				status = AE_AML_PACKAGE_LIMIT;
+				goto cleanup;
+			}
+
+			return_desc->reference.target_type = ACPI_TYPE_PACKAGE;
+			return_desc->reference.object    = operand[0];
+			return_desc->reference.where     = &operand[0]->package.elements [index];
+		}
+		else {
+			/* Object to be indexed is a Buffer/String */
+
+			if (index >= operand[0]->buffer.length) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Index value (%X) beyond end of buffer (%X)\n",
+					index, operand[0]->buffer.length));
+				status = AE_AML_BUFFER_LIMIT;
+				goto cleanup;
+			}
+
+			return_desc->reference.target_type = ACPI_TYPE_BUFFER_FIELD;
+			return_desc->reference.object    = operand[0];
+		}
+
+		/*
+		 * Add a reference to the target package/buffer/string for the life
+		 * of the index.
+		 */
+		acpi_ut_add_reference (operand[0]);
+
+		/* Complete the Index reference object */
+
+		return_desc->reference.opcode    = AML_INDEX_OP;
+		return_desc->reference.offset    = index;
+
+		/* Store the reference to the Target */
+
+		status = acpi_ex_store (return_desc, operand[2], walk_state);
+
+		/* Return the reference */
+
+		walk_state->result_obj = return_desc;
+		goto cleanup;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_1T_1R: Unknown opcode %X\n",
+				walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+
+store_result_to_target:
+
+	if (ACPI_SUCCESS (status)) {
+		/*
+		 * Store the result of the operation (which is now in return_desc) into
+		 * the Target descriptor.
+		 */
+		status = acpi_ex_store (return_desc, operand[2], walk_state);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		if (!walk_state->result_obj) {
+			walk_state->result_obj = return_desc;
+		}
+	}
+
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (return_desc);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_2A_0T_1R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with 2 arguments, no target, and a return value
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_2A_0T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *return_desc = NULL;
+	acpi_status                     status = AE_OK;
+	u8                              logical_result = FALSE;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_0T_1R",
+		acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	/* Create the internal return object */
+
+	return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+	if (!return_desc) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/*
+	 * Execute the Opcode
+	 */
+	if (walk_state->op_info->flags & AML_LOGICAL_NUMERIC) /* logical_op (Operand0, Operand1) */ {
+		status = acpi_ex_do_logical_numeric_op (walk_state->opcode,
+				  operand[0]->integer.value, operand[1]->integer.value,
+				  &logical_result);
+		goto store_logical_result;
+	}
+	else if (walk_state->op_info->flags & AML_LOGICAL)  /* logical_op (Operand0, Operand1) */ {
+		status = acpi_ex_do_logical_op (walk_state->opcode, operand[0],
+				 operand[1], &logical_result);
+		goto store_logical_result;
+	}
+
+
+	switch (walk_state->opcode) {
+	case AML_ACQUIRE_OP:            /* Acquire (mutex_object, Timeout) */
+
+		status = acpi_ex_acquire_mutex (operand[1], operand[0], walk_state);
+		if (status == AE_TIME) {
+			logical_result = TRUE;      /* TRUE = Acquire timed out */
+			status = AE_OK;
+		}
+		break;
+
+
+	case AML_WAIT_OP:               /* Wait (event_object, Timeout) */
+
+		status = acpi_ex_system_wait_event (operand[1], operand[0]);
+		if (status == AE_TIME) {
+			logical_result = TRUE;      /* TRUE, Wait timed out */
+			status = AE_OK;
+		}
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_0T_1R: Unknown opcode %X\n",
+			walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+
+store_logical_result:
+	/*
+	 * Set return value to according to logical_result. logical TRUE (all ones)
+	 * Default is FALSE (zero)
+	 */
+	if (logical_result) {
+		return_desc->integer.value = ACPI_INTEGER_MAX;
+	}
+
+	walk_state->result_obj = return_desc;
+
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (return_desc);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exoparg3.c b/drivers/acpi/executer/exoparg3.c
new file mode 100644
index 0000000..29d0b16
--- /dev/null
+++ b/drivers/acpi/executer/exoparg3.c
@@ -0,0 +1,256 @@
+
+/******************************************************************************
+ *
+ * Module Name: exoparg3 - AML execution - opcodes with 3 arguments
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exoparg3")
+
+
+/*!
+ * Naming convention for AML interpreter execution routines.
+ *
+ * The routines that begin execution of AML opcodes are named with a common
+ * convention based upon the number of arguments, the number of target operands,
+ * and whether or not a value is returned:
+ *
+ *      AcpiExOpcode_xA_yT_zR
+ *
+ * Where:
+ *
+ * xA - ARGUMENTS:    The number of arguments (input operands) that are
+ *                    required for this opcode type (1 through 6 args).
+ * yT - TARGETS:      The number of targets (output operands) that are required
+ *                    for this opcode type (0, 1, or 2 targets).
+ * zR - RETURN VALUE: Indicates whether this opcode type returns a value
+ *                    as the function return (0 or 1).
+ *
+ * The AcpiExOpcode* functions are called via the Dispatcher component with
+ * fully resolved operands.
+!*/
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_3A_0T_0R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute Triadic operator (3 operands)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_3A_0T_0R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	struct acpi_signal_fatal_info   *fatal;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_3A_0T_0R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	switch (walk_state->opcode) {
+	case AML_FATAL_OP:          /* Fatal (fatal_type fatal_code fatal_arg)   */
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+			"fatal_op: Type %X Code %X Arg %X <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n",
+			(u32) operand[0]->integer.value,
+			(u32) operand[1]->integer.value,
+			(u32) operand[2]->integer.value));
+
+		fatal = ACPI_MEM_ALLOCATE (sizeof (struct acpi_signal_fatal_info));
+		if (fatal) {
+			fatal->type     = (u32) operand[0]->integer.value;
+			fatal->code     = (u32) operand[1]->integer.value;
+			fatal->argument = (u32) operand[2]->integer.value;
+		}
+
+		/*
+		 * Always signal the OS!
+		 */
+		status = acpi_os_signal (ACPI_SIGNAL_FATAL, fatal);
+
+		/* Might return while OS is shutting down, just continue */
+
+		ACPI_MEM_FREE (fatal);
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n",
+				walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+
+cleanup:
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_3A_1T_1R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute Triadic operator (3 operands)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_3A_1T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *return_desc = NULL;
+	char                            *buffer;
+	acpi_status                     status = AE_OK;
+	acpi_native_uint                index;
+	acpi_size                       length;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_3A_1T_1R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	switch (walk_state->opcode) {
+	case AML_MID_OP:        /* Mid  (Source[0], Index[1], Length[2], Result[3]) */
+
+		/*
+		 * Create the return object.  The Source operand is guaranteed to be
+		 * either a String or a Buffer, so just use its type.
+		 */
+		return_desc = acpi_ut_create_internal_object (ACPI_GET_OBJECT_TYPE (operand[0]));
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/* Get the Integer values from the objects */
+
+		index = (acpi_native_uint) operand[1]->integer.value;
+		length = (acpi_size) operand[2]->integer.value;
+
+		/*
+		 * If the index is beyond the length of the String/Buffer, or if the
+		 * requested length is zero, return a zero-length String/Buffer
+		 */
+		if ((index < operand[0]->string.length) &&
+			(length > 0)) {
+			/* Truncate request if larger than the actual String/Buffer */
+
+			if ((index + length) >
+				operand[0]->string.length) {
+				length = (acpi_size) operand[0]->string.length - index;
+			}
+
+			/* Allocate a new buffer for the String/Buffer */
+
+			buffer = ACPI_MEM_CALLOCATE ((acpi_size) length + 1);
+			if (!buffer) {
+				status = AE_NO_MEMORY;
+				goto cleanup;
+			}
+
+			/* Copy the portion requested */
+
+			ACPI_MEMCPY (buffer, operand[0]->string.pointer + index,
+					  length);
+
+			/* Set the length of the new String/Buffer */
+
+			return_desc->string.pointer = buffer;
+			return_desc->string.length = (u32) length;
+		}
+
+		/* Mark buffer initialized */
+
+		return_desc->buffer.flags |= AOPOBJ_DATA_VALID;
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n",
+				walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+	/* Store the result in the target */
+
+	status = acpi_ex_store (return_desc, operand[3], walk_state);
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (return_desc);
+	}
+
+	/* Set the return object and exit */
+
+	if (!walk_state->result_obj) {
+		walk_state->result_obj = return_desc;
+	}
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exoparg6.c b/drivers/acpi/executer/exoparg6.c
new file mode 100644
index 0000000..d326243
--- /dev/null
+++ b/drivers/acpi/executer/exoparg6.c
@@ -0,0 +1,336 @@
+
+/******************************************************************************
+ *
+ * Module Name: exoparg6 - AML execution - opcodes with 6 arguments
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exoparg6")
+
+
+/*!
+ * Naming convention for AML interpreter execution routines.
+ *
+ * The routines that begin execution of AML opcodes are named with a common
+ * convention based upon the number of arguments, the number of target operands,
+ * and whether or not a value is returned:
+ *
+ *      AcpiExOpcode_xA_yT_zR
+ *
+ * Where:
+ *
+ * xA - ARGUMENTS:    The number of arguments (input operands) that are
+ *                    required for this opcode type (1 through 6 args).
+ * yT - TARGETS:      The number of targets (output operands) that are required
+ *                    for this opcode type (0, 1, or 2 targets).
+ * zR - RETURN VALUE: Indicates whether this opcode type returns a value
+ *                    as the function return (0 or 1).
+ *
+ * The AcpiExOpcode* functions are called via the Dispatcher component with
+ * fully resolved operands.
+!*/
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_do_match
+ *
+ * PARAMETERS:  match_op        - The AML match operand
+ *              package_obj     - Object from the target package
+ *              match_obj       - Object to be matched
+ *
+ * RETURN:      TRUE if the match is successful, FALSE otherwise
+ *
+ * DESCRIPTION: Implements the low-level match for the ASL Match operator.
+ *              Package elements will be implicitly converted to the type of
+ *              the match object (Integer/Buffer/String).
+ *
+ ******************************************************************************/
+
+u8
+acpi_ex_do_match (
+	u32                             match_op,
+	union acpi_operand_object       *package_obj,
+	union acpi_operand_object       *match_obj)
+{
+	u8                              logical_result = TRUE;
+	acpi_status                     status;
+
+
+	/*
+	 * Note: Since the package_obj/match_obj ordering is opposite to that of
+	 * the standard logical operators, we have to reverse them when we call
+	 * do_logical_op in order to make the implicit conversion rules work
+	 * correctly. However, this means we have to flip the entire equation
+	 * also. A bit ugly perhaps, but overall, better than fussing the
+	 * parameters around at runtime, over and over again.
+	 *
+	 * Below, P[i] refers to the package element, M refers to the Match object.
+	 */
+	switch (match_op) {
+	case MATCH_MTR:
+
+		/* Always true */
+
+		break;
+
+	case MATCH_MEQ:
+
+		/*
+		 * True if equal: (P[i] == M)
+		 * Change to:     (M == P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LEQUAL_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
+			return (FALSE);
+		}
+		break;
+
+	case MATCH_MLE:
+
+		/*
+		 * True if less than or equal: (P[i] <= M) (P[i] not_greater than M)
+		 * Change to:                  (M >= P[i]) (M not_less than P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
+			return (FALSE);
+		}
+		logical_result = (u8) !logical_result;
+		break;
+
+	case MATCH_MLT:
+
+		/*
+		 * True if less than: (P[i] < M)
+		 * Change to:         (M > P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
+			return (FALSE);
+		}
+		break;
+
+	case MATCH_MGE:
+
+		/*
+		 * True if greater than or equal: (P[i] >= M) (P[i] not_less than M)
+		 * Change to:                     (M <= P[i]) (M not_greater than P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LGREATER_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
+			return (FALSE);
+		}
+		logical_result = (u8)!logical_result;
+		break;
+
+	case MATCH_MGT:
+
+		/*
+		 * True if greater than: (P[i] > M)
+		 * Change to:            (M < P[i])
+		 */
+		status = acpi_ex_do_logical_op (AML_LLESS_OP, match_obj, package_obj,
+				 &logical_result);
+		if (ACPI_FAILURE (status)) {
+			return (FALSE);
+		}
+		break;
+
+	default:
+
+		/* Undefined */
+
+		return (FALSE);
+	}
+
+	return logical_result;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_6A_0T_1R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with 6 arguments, no target, and a return value
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_opcode_6A_0T_1R (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       **operand = &walk_state->operands[0];
+	union acpi_operand_object       *return_desc = NULL;
+	acpi_status                     status = AE_OK;
+	u32                             index;
+	union acpi_operand_object       *this_element;
+
+
+	ACPI_FUNCTION_TRACE_STR ("ex_opcode_6A_0T_1R", acpi_ps_get_opcode_name (walk_state->opcode));
+
+
+	switch (walk_state->opcode) {
+	case AML_MATCH_OP:
+		/*
+		 * Match (search_pkg[0], match_op1[1], match_obj1[2],
+		 *                      match_op2[3], match_obj2[4], start_index[5])
+		 */
+
+		/* Validate both Match Term Operators (MTR, MEQ, etc.) */
+
+		if ((operand[1]->integer.value > MAX_MATCH_OPERATOR) ||
+			(operand[3]->integer.value > MAX_MATCH_OPERATOR)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Match operator out of range\n"));
+			status = AE_AML_OPERAND_VALUE;
+			goto cleanup;
+		}
+
+		/* Get the package start_index, validate against the package length */
+
+		index = (u32) operand[5]->integer.value;
+		if (index >= (u32) operand[0]->package.count) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Index beyond package end\n"));
+			status = AE_AML_PACKAGE_LIMIT;
+			goto cleanup;
+		}
+
+		/* Create an integer for the return value */
+
+		return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+
+		}
+
+		/* Default return value if no match found */
+
+		return_desc->integer.value = ACPI_INTEGER_MAX;
+
+		/*
+		 * Examine each element until a match is found. Both match conditions
+		 * must be satisfied for a match to occur. Within the loop,
+		 * "continue" signifies that the current element does not match
+		 * and the next should be examined.
+		 *
+		 * Upon finding a match, the loop will terminate via "break" at
+		 * the bottom.  If it terminates "normally", match_value will be
+		 * ACPI_INTEGER_MAX (Ones) (its initial value) indicating that no
+		 * match was found.
+		 */
+		for ( ; index < operand[0]->package.count; index++) {
+			/* Get the current package element */
+
+			this_element = operand[0]->package.elements[index];
+
+			/* Treat any uninitialized (NULL) elements as non-matching */
+
+			if (!this_element) {
+				continue;
+			}
+
+			/*
+			 * Both match conditions must be satisfied. Execution of a continue
+			 * (proceed to next iteration of enclosing for loop) signifies a
+			 * non-match.
+			 */
+			if (!acpi_ex_do_match ((u32) operand[1]->integer.value,
+					   this_element, operand[2])) {
+				continue;
+			}
+
+			if (!acpi_ex_do_match ((u32) operand[3]->integer.value,
+					   this_element, operand[4])) {
+				continue;
+			}
+
+			/* Match found: Index is the return value */
+
+			return_desc->integer.value = index;
+			break;
+		}
+		break;
+
+
+	case AML_LOAD_TABLE_OP:
+
+		status = acpi_ex_load_table_op (walk_state, &return_desc);
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("acpi_ex_opcode_3A_0T_0R: Unknown opcode %X\n",
+				walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+
+	walk_state->result_obj = return_desc;
+
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_remove_reference (return_desc);
+	}
+
+	return_ACPI_STATUS (status);
+}
diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c
new file mode 100644
index 0000000..264ef3b
--- /dev/null
+++ b/drivers/acpi/executer/exprep.c
@@ -0,0 +1,530 @@
+
+/******************************************************************************
+ *
+ * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exprep")
+
+
+#ifdef ACPI_UNDER_DEVELOPMENT
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_generate_access
+ *
+ * PARAMETERS:  field_bit_offset    - Start of field within parent region/buffer
+ *              field_bit_length    - Length of field in bits
+ *              region_length       - Length of parent in bytes
+ *
+ * RETURN:      Field granularity (8, 16, 32 or 64) and
+ *              byte_alignment (1, 2, 3, or 4)
+ *
+ * DESCRIPTION: Generate an optimal access width for fields defined with the
+ *              any_acc keyword.
+ *
+ * NOTE: Need to have the region_length in order to check for boundary
+ *       conditions (end-of-region).  However, the region_length is a deferred
+ *       operation.  Therefore, to complete this implementation, the generation
+ *       of this access width must be deferred until the region length has
+ *       been evaluated.
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_generate_access (
+	u32                             field_bit_offset,
+	u32                             field_bit_length,
+	u32                             region_length)
+{
+	u32                             field_byte_length;
+	u32                             field_byte_offset;
+	u32                             field_byte_end_offset;
+	u32                             access_byte_width;
+	u32                             field_start_offset;
+	u32                             field_end_offset;
+	u32                             minimum_access_width = 0xFFFFFFFF;
+	u32                             minimum_accesses = 0xFFFFFFFF;
+	u32                             accesses;
+
+
+	ACPI_FUNCTION_TRACE ("ex_generate_access");
+
+
+	/* Round Field start offset and length to "minimal" byte boundaries */
+
+	field_byte_offset  = ACPI_DIV_8 (ACPI_ROUND_DOWN (field_bit_offset, 8));
+	field_byte_end_offset = ACPI_DIV_8 (ACPI_ROUND_UP (field_bit_length + field_bit_offset, 8));
+	field_byte_length  = field_byte_end_offset - field_byte_offset;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Bit length %d, Bit offset %d\n",
+			field_bit_length, field_bit_offset));
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Byte Length %d, Byte Offset %d, End Offset %d\n",
+			field_byte_length, field_byte_offset, field_byte_end_offset));
+
+	/*
+	 * Iterative search for the maximum access width that is both aligned
+	 * and does not go beyond the end of the region
+	 *
+	 * Start at byte_acc and work upwards to qword_acc max. (1,2,4,8 bytes)
+	 */
+	for (access_byte_width = 1; access_byte_width <= 8; access_byte_width <<= 1) {
+		/*
+		 * 1) Round end offset up to next access boundary and make sure that this
+		 *    does not go beyond the end of the parent region.
+		 * 2) When the Access width is greater than the field_byte_length, we are done.
+		 *    (This does not optimize for the perfectly aligned case yet).
+		 */
+		if (ACPI_ROUND_UP (field_byte_end_offset, access_byte_width) <= region_length) {
+			field_start_offset = ACPI_ROUND_DOWN (field_byte_offset, access_byte_width) /
+					  access_byte_width;
+			field_end_offset = ACPI_ROUND_UP   ((field_byte_length + field_byte_offset),
+					  access_byte_width) / access_byte_width;
+			accesses         = field_end_offset - field_start_offset;
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"access_width %d end is within region\n", access_byte_width));
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"Field Start %d, Field End %d -- requires %d accesses\n",
+					field_start_offset, field_end_offset, accesses));
+
+			/* Single access is optimal */
+
+			if (accesses <= 1) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+						"Entire field can be accessed with one operation of size %d\n",
+						access_byte_width));
+				return_VALUE (access_byte_width);
+			}
+
+			/*
+			 * Fits in the region, but requires more than one read/write.
+			 * try the next wider access on next iteration
+			 */
+			if (accesses < minimum_accesses) {
+				minimum_accesses   = accesses;
+				minimum_access_width = access_byte_width;
+			}
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"access_width %d end is NOT within region\n", access_byte_width));
+			if (access_byte_width == 1) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+						"Field goes beyond end-of-region!\n"));
+				return_VALUE (0);     /* Field does not fit in the region at all */
+			}
+
+			/* This width goes beyond the end-of-region, back off to previous access */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+					"Backing off to previous optimal access width of %d\n",
+					minimum_access_width));
+			return_VALUE (minimum_access_width);
+		}
+	}
+
+	/* Could not read/write field with one operation, just use max access width */
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Cannot access field in one operation, using width 8\n"));
+	return_VALUE (8);
+}
+#endif /* ACPI_UNDER_DEVELOPMENT */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_decode_field_access
+ *
+ * PARAMETERS:  Access          - Encoded field access bits
+ *              Length          - Field length.
+ *
+ * RETURN:      Field granularity (8, 16, 32 or 64) and
+ *              byte_alignment (1, 2, 3, or 4)
+ *
+ * DESCRIPTION: Decode the access_type bits of a field definition.
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_decode_field_access (
+	union acpi_operand_object       *obj_desc,
+	u8                              field_flags,
+	u32                             *return_byte_alignment)
+{
+	u32                             access;
+	u32                             byte_alignment;
+	u32                             bit_length;
+
+
+	ACPI_FUNCTION_TRACE ("ex_decode_field_access");
+
+
+	access = (field_flags & AML_FIELD_ACCESS_TYPE_MASK);
+
+	switch (access) {
+	case AML_FIELD_ACCESS_ANY:
+
+#ifdef ACPI_UNDER_DEVELOPMENT
+		byte_alignment = acpi_ex_generate_access (obj_desc->common_field.start_field_bit_offset,
+				 obj_desc->common_field.bit_length,
+				 0xFFFFFFFF /* Temp until we pass region_length as param */);
+		bit_length = byte_alignment * 8;
+#endif
+
+		byte_alignment = 1;
+		bit_length = 8;
+		break;
+
+	case AML_FIELD_ACCESS_BYTE:
+	case AML_FIELD_ACCESS_BUFFER:   /* ACPI 2.0 (SMBus Buffer) */
+		byte_alignment = 1;
+		bit_length    = 8;
+		break;
+
+	case AML_FIELD_ACCESS_WORD:
+		byte_alignment = 2;
+		bit_length    = 16;
+		break;
+
+	case AML_FIELD_ACCESS_DWORD:
+		byte_alignment = 4;
+		bit_length    = 32;
+		break;
+
+	case AML_FIELD_ACCESS_QWORD:    /* ACPI 2.0 */
+		byte_alignment = 8;
+		bit_length    = 64;
+		break;
+
+	default:
+		/* Invalid field access type */
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Unknown field access type %X\n",
+			access));
+		return_VALUE (0);
+	}
+
+	if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_BUFFER_FIELD) {
+		/*
+		 * buffer_field access can be on any byte boundary, so the
+		 * byte_alignment is always 1 byte -- regardless of any byte_alignment
+		 * implied by the field access type.
+		 */
+		byte_alignment = 1;
+	}
+
+	*return_byte_alignment = byte_alignment;
+	return_VALUE (bit_length);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_prep_common_field_object
+ *
+ * PARAMETERS:  obj_desc            - The field object
+ *              field_flags         - Access, lock_rule, and update_rule.
+ *                                    The format of a field_flag is described
+ *                                    in the ACPI specification
+ *              field_bit_position  - Field start position
+ *              field_bit_length    - Field length in number of bits
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Initialize the areas of the field object that are common
+ *              to the various types of fields.  Note: This is very "sensitive"
+ *              code because we are solving the general case for field
+ *              alignment.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_prep_common_field_object (
+	union acpi_operand_object       *obj_desc,
+	u8                              field_flags,
+	u8                              field_attribute,
+	u32                             field_bit_position,
+	u32                             field_bit_length)
+{
+	u32                             access_bit_width;
+	u32                             byte_alignment;
+	u32                             nearest_byte_address;
+
+
+	ACPI_FUNCTION_TRACE ("ex_prep_common_field_object");
+
+
+	/*
+	 * Note: the structure being initialized is the
+	 * ACPI_COMMON_FIELD_INFO;  No structure fields outside of the common
+	 * area are initialized by this procedure.
+	 */
+	obj_desc->common_field.field_flags = field_flags;
+	obj_desc->common_field.attribute = field_attribute;
+	obj_desc->common_field.bit_length = field_bit_length;
+
+	/*
+	 * Decode the access type so we can compute offsets.  The access type gives
+	 * two pieces of information - the width of each field access and the
+	 * necessary byte_alignment (address granularity) of the access.
+	 *
+	 * For any_acc, the access_bit_width is the largest width that is both
+	 * necessary and possible in an attempt to access the whole field in one
+	 * I/O operation.  However, for any_acc, the byte_alignment is always one
+	 * byte.
+	 *
+	 * For all Buffer Fields, the byte_alignment is always one byte.
+	 *
+	 * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
+	 * the same (equivalent) as the byte_alignment.
+	 */
+	access_bit_width = acpi_ex_decode_field_access (obj_desc, field_flags,
+			  &byte_alignment);
+	if (!access_bit_width) {
+		return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
+	}
+
+	/* Setup width (access granularity) fields */
+
+	obj_desc->common_field.access_byte_width = (u8)
+			ACPI_DIV_8 (access_bit_width); /* 1, 2, 4,  8 */
+
+	obj_desc->common_field.access_bit_width = (u8) access_bit_width;
+
+	/*
+	 * base_byte_offset is the address of the start of the field within the
+	 * region.  It is the byte address of the first *datum* (field-width data
+	 * unit) of the field. (i.e., the first datum that contains at least the
+	 * first *bit* of the field.)
+	 *
+	 * Note: byte_alignment is always either equal to the access_bit_width or 8
+	 * (Byte access), and it defines the addressing granularity of the parent
+	 * region or buffer.
+	 */
+	nearest_byte_address =
+			ACPI_ROUND_BITS_DOWN_TO_BYTES (field_bit_position);
+	obj_desc->common_field.base_byte_offset = (u32)
+			ACPI_ROUND_DOWN (nearest_byte_address, byte_alignment);
+
+	/*
+	 * start_field_bit_offset is the offset of the first bit of the field within
+	 * a field datum.
+	 */
+	obj_desc->common_field.start_field_bit_offset = (u8)
+		(field_bit_position - ACPI_MUL_8 (obj_desc->common_field.base_byte_offset));
+
+	/*
+	 * Does the entire field fit within a single field access element? (datum)
+	 * (i.e., without crossing a datum boundary)
+	 */
+	if ((obj_desc->common_field.start_field_bit_offset + field_bit_length) <=
+			(u16) access_bit_width) {
+		obj_desc->common.flags |= AOPOBJ_SINGLE_DATUM;
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_prep_field_value
+ *
+ * PARAMETERS:  Node                - Owning Node
+ *              region_node         - Region in which field is being defined
+ *              field_flags         - Access, lock_rule, and update_rule.
+ *              field_bit_position  - Field start position
+ *              field_bit_length    - Field length in number of bits
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Construct an union acpi_operand_object of type def_field and
+ *              connect it to the parent Node.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_prep_field_value (
+	struct acpi_create_field_info   *info)
+{
+	union acpi_operand_object       *obj_desc;
+	u32                             type;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ex_prep_field_value");
+
+
+	/* Parameter validation */
+
+	if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) {
+		if (!info->region_node) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null region_node\n"));
+			return_ACPI_STATUS (AE_AML_NO_OPERAND);
+		}
+
+		type = acpi_ns_get_type (info->region_node);
+		if (type != ACPI_TYPE_REGION) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Needed Region, found type %X (%s)\n",
+				type, acpi_ut_get_type_name (type)));
+
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+	}
+
+	/* Allocate a new field object */
+
+	obj_desc = acpi_ut_create_internal_object (info->field_type);
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/* Initialize areas of the object that are common to all fields */
+
+	obj_desc->common_field.node = info->field_node;
+	status = acpi_ex_prep_common_field_object (obj_desc, info->field_flags,
+			 info->attribute, info->field_bit_position, info->field_bit_length);
+	if (ACPI_FAILURE (status)) {
+		acpi_ut_delete_object_desc (obj_desc);
+		return_ACPI_STATUS (status);
+	}
+
+	/* Initialize areas of the object that are specific to the field type */
+
+	switch (info->field_type) {
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+
+		obj_desc->field.region_obj   = acpi_ns_get_attached_object (info->region_node);
+
+		/* An additional reference for the container */
+
+		acpi_ut_add_reference (obj_desc->field.region_obj);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"region_field: bit_off %X, Off %X, Gran %X, Region %p\n",
+			obj_desc->field.start_field_bit_offset, obj_desc->field.base_byte_offset,
+			obj_desc->field.access_byte_width, obj_desc->field.region_obj));
+		break;
+
+
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+
+		obj_desc->bank_field.value   = info->bank_value;
+		obj_desc->bank_field.region_obj = acpi_ns_get_attached_object (info->region_node);
+		obj_desc->bank_field.bank_obj = acpi_ns_get_attached_object (info->register_node);
+
+		/* An additional reference for the attached objects */
+
+		acpi_ut_add_reference (obj_desc->bank_field.region_obj);
+		acpi_ut_add_reference (obj_desc->bank_field.bank_obj);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"Bank Field: bit_off %X, Off %X, Gran %X, Region %p, bank_reg %p\n",
+			obj_desc->bank_field.start_field_bit_offset,
+			obj_desc->bank_field.base_byte_offset,
+			obj_desc->field.access_byte_width,
+			obj_desc->bank_field.region_obj,
+			obj_desc->bank_field.bank_obj));
+		break;
+
+
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		obj_desc->index_field.index_obj = acpi_ns_get_attached_object (info->register_node);
+		obj_desc->index_field.data_obj = acpi_ns_get_attached_object (info->data_register_node);
+		obj_desc->index_field.value  = (u32)
+			(info->field_bit_position / ACPI_MUL_8 (obj_desc->field.access_byte_width));
+
+		if (!obj_desc->index_field.data_obj || !obj_desc->index_field.index_obj) {
+			ACPI_REPORT_ERROR (("Null Index Object during field prep\n"));
+			acpi_ut_delete_object_desc (obj_desc);
+			return_ACPI_STATUS (AE_AML_INTERNAL);
+		}
+
+		/* An additional reference for the attached objects */
+
+		acpi_ut_add_reference (obj_desc->index_field.data_obj);
+		acpi_ut_add_reference (obj_desc->index_field.index_obj);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
+			"index_field: bit_off %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
+			obj_desc->index_field.start_field_bit_offset,
+			obj_desc->index_field.base_byte_offset,
+			obj_desc->index_field.value,
+			obj_desc->field.access_byte_width,
+			obj_desc->index_field.index_obj,
+			obj_desc->index_field.data_obj));
+		break;
+
+	default:
+		/* No other types should get here */
+		break;
+	}
+
+	/*
+	 * Store the constructed descriptor (obj_desc) into the parent Node,
+	 * preserving the current type of that named_obj.
+	 */
+	status = acpi_ns_attach_object (info->field_node, obj_desc,
+			  acpi_ns_get_type (info->field_node));
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Set named_obj %p [%4.4s], obj_desc %p\n",
+			info->field_node, acpi_ut_get_node_name (info->field_node), obj_desc));
+
+	/* Remove local reference to the object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
diff --git a/drivers/acpi/executer/exregion.c b/drivers/acpi/executer/exregion.c
new file mode 100644
index 0000000..7cfd068
--- /dev/null
+++ b/drivers/acpi/executer/exregion.c
@@ -0,0 +1,528 @@
+
+/******************************************************************************
+ *
+ * Module Name: exregion - ACPI default op_region (address space) handlers
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exregion")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_memory_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the System Memory address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_memory_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context)
+{
+	acpi_status                     status = AE_OK;
+	void                            *logical_addr_ptr = NULL;
+	struct acpi_mem_space_context   *mem_info = region_context;
+	u32                             length;
+	acpi_size                       window_size;
+#ifndef ACPI_MISALIGNED_TRANSFERS
+	u32                             remainder;
+#endif
+
+	ACPI_FUNCTION_TRACE ("ex_system_memory_space_handler");
+
+
+	/* Validate and translate the bit width */
+
+	switch (bit_width) {
+	case 8:
+		length = 1;
+		break;
+
+	case 16:
+		length = 2;
+		break;
+
+	case 32:
+		length = 4;
+		break;
+
+	case 64:
+		length = 8;
+		break;
+
+	default:
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid system_memory width %d\n",
+			bit_width));
+		return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
+	}
+
+
+#ifndef ACPI_MISALIGNED_TRANSFERS
+	/*
+	 * Hardware does not support non-aligned data transfers, we must verify
+	 * the request.
+	 */
+	(void) acpi_ut_short_divide ((acpi_integer) address, length, NULL, &remainder);
+	if (remainder != 0) {
+		return_ACPI_STATUS (AE_AML_ALIGNMENT);
+	}
+#endif
+
+	/*
+	 * Does the request fit into the cached memory mapping?
+	 * Is 1) Address below the current mapping? OR
+	 *    2) Address beyond the current mapping?
+	 */
+	if ((address < mem_info->mapped_physical_address) ||
+		(((acpi_integer) address + length) >
+			((acpi_integer) mem_info->mapped_physical_address + mem_info->mapped_length))) {
+		/*
+		 * The request cannot be resolved by the current memory mapping;
+		 * Delete the existing mapping and create a new one.
+		 */
+		if (mem_info->mapped_length) {
+			/* Valid mapping, delete it */
+
+			acpi_os_unmap_memory (mem_info->mapped_logical_address,
+					   mem_info->mapped_length);
+		}
+
+		/*
+		 * Don't attempt to map memory beyond the end of the region, and
+		 * constrain the maximum mapping size to something reasonable.
+		 */
+		window_size = (acpi_size) ((mem_info->address + mem_info->length) - address);
+		if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
+			window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
+		}
+
+		/* Create a new mapping starting at the address given */
+
+		status = acpi_os_map_memory (address, window_size,
+				  (void **) &mem_info->mapped_logical_address);
+		if (ACPI_FAILURE (status)) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Could not map memory at %8.8X%8.8X, size %X\n",
+					ACPI_FORMAT_UINT64 (address), (u32) window_size));
+			mem_info->mapped_length = 0;
+			return_ACPI_STATUS (status);
+		}
+
+		/* Save the physical address and mapping size */
+
+		mem_info->mapped_physical_address = address;
+		mem_info->mapped_length = window_size;
+	}
+
+	/*
+	 * Generate a logical pointer corresponding to the address we want to
+	 * access
+	 */
+	logical_addr_ptr = mem_info->mapped_logical_address +
+			  ((acpi_integer) address - (acpi_integer) mem_info->mapped_physical_address);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+			"system_memory %d (%d width) Address=%8.8X%8.8X\n", function, bit_width,
+			ACPI_FORMAT_UINT64 (address)));
+
+   /*
+	* Perform the memory read or write
+	*
+	* Note: For machines that do not support non-aligned transfers, the target
+	* address was checked for alignment above.  We do not attempt to break the
+	* transfer up into smaller (byte-size) chunks because the AML specifically
+	* asked for a transfer width that the hardware may require.
+	*/
+	switch (function) {
+	case ACPI_READ:
+
+		*value = 0;
+		switch (bit_width) {
+		case 8:
+			*value = (acpi_integer) *((u8 *) logical_addr_ptr);
+			break;
+
+		case 16:
+			*value = (acpi_integer) *((u16 *) logical_addr_ptr);
+			break;
+
+		case 32:
+			*value = (acpi_integer) *((u32 *) logical_addr_ptr);
+			break;
+
+#if ACPI_MACHINE_WIDTH != 16
+		case 64:
+			*value = (acpi_integer) *((u64 *) logical_addr_ptr);
+			break;
+#endif
+		default:
+			/* bit_width was already validated */
+			break;
+		}
+		break;
+
+	case ACPI_WRITE:
+
+		switch (bit_width) {
+		case 8:
+			*(u8 *) logical_addr_ptr = (u8) *value;
+			break;
+
+		case 16:
+			*(u16 *) logical_addr_ptr = (u16) *value;
+			break;
+
+		case 32:
+			*(u32 *) logical_addr_ptr = (u32) *value;
+			break;
+
+#if ACPI_MACHINE_WIDTH != 16
+		case 64:
+			*(u64 *) logical_addr_ptr = (u64) *value;
+			break;
+#endif
+
+		default:
+			/* bit_width was already validated */
+			break;
+		}
+		break;
+
+	default:
+		status = AE_BAD_PARAMETER;
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_io_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the System IO address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_io_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context)
+{
+	acpi_status                     status = AE_OK;
+	u32                             value32;
+
+
+	ACPI_FUNCTION_TRACE ("ex_system_io_space_handler");
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+			"system_iO %d (%d width) Address=%8.8X%8.8X\n", function, bit_width,
+			ACPI_FORMAT_UINT64 (address)));
+
+	/* Decode the function parameter */
+
+	switch (function) {
+	case ACPI_READ:
+
+		status = acpi_os_read_port ((acpi_io_address) address, &value32, bit_width);
+		*value = value32;
+		break;
+
+	case ACPI_WRITE:
+
+		status = acpi_os_write_port ((acpi_io_address) address, (u32) *value, bit_width);
+		break;
+
+	default:
+		status = AE_BAD_PARAMETER;
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_pci_config_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the PCI Config address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_pci_config_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context)
+{
+	acpi_status                     status = AE_OK;
+	struct acpi_pci_id              *pci_id;
+	u16                             pci_register;
+
+
+	ACPI_FUNCTION_TRACE ("ex_pci_config_space_handler");
+
+
+	/*
+	 *  The arguments to acpi_os(Read|Write)pci_configuration are:
+	 *
+	 *  pci_segment is the PCI bus segment range 0-31
+	 *  pci_bus     is the PCI bus number range 0-255
+	 *  pci_device  is the PCI device number range 0-31
+	 *  pci_function is the PCI device function number
+	 *  pci_register is the Config space register range 0-255 bytes
+	 *
+	 *  Value - input value for write, output address for read
+	 *
+	 */
+	pci_id      = (struct acpi_pci_id *) region_context;
+	pci_register = (u16) (u32) address;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+		"pci_config %d (%d) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
+		function, bit_width, pci_id->segment, pci_id->bus, pci_id->device,
+		pci_id->function, pci_register));
+
+	switch (function) {
+	case ACPI_READ:
+
+		*value = 0;
+		status = acpi_os_read_pci_configuration (pci_id, pci_register, value, bit_width);
+		break;
+
+	case ACPI_WRITE:
+
+		status = acpi_os_write_pci_configuration (pci_id, pci_register, *value, bit_width);
+		break;
+
+	default:
+
+		status = AE_BAD_PARAMETER;
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_cmos_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the CMOS address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_cmos_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_cmos_space_handler");
+
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_pci_bar_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the PCI bar_target address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_pci_bar_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_pci_bar_space_handler");
+
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_data_table_space_handler
+ *
+ * PARAMETERS:  Function            - Read or Write operation
+ *              Address             - Where in the space to read or write
+ *              bit_width           - Field width in bits (8, 16, or 32)
+ *              Value               - Pointer to in or out value
+ *              handler_context     - Pointer to Handler's context
+ *              region_context      - Pointer to context specific to the
+ *                                    accessed region
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handler for the Data Table address space (Op Region)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_data_table_space_handler (
+	u32                             function,
+	acpi_physical_address           address,
+	u32                             bit_width,
+	acpi_integer                    *value,
+	void                            *handler_context,
+	void                            *region_context)
+{
+	acpi_status                     status = AE_OK;
+	u32                             byte_width = ACPI_DIV_8 (bit_width);
+	u32                             i;
+	char                            *logical_addr_ptr;
+
+
+	ACPI_FUNCTION_TRACE ("ex_data_table_space_handler");
+
+
+	logical_addr_ptr = ACPI_PHYSADDR_TO_PTR (address);
+
+
+   /* Perform the memory read or write */
+
+	switch (function) {
+	case ACPI_READ:
+
+		for (i = 0; i < byte_width; i++) {
+			((char *) value) [i] = logical_addr_ptr[i];
+		}
+		break;
+
+	case ACPI_WRITE:
+	default:
+
+		return_ACPI_STATUS (AE_SUPPORT);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exresnte.c b/drivers/acpi/executer/exresnte.c
new file mode 100644
index 0000000..7936329
--- /dev/null
+++ b/drivers/acpi/executer/exresnte.c
@@ -0,0 +1,289 @@
+
+/******************************************************************************
+ *
+ * Module Name: exresnte - AML Interpreter object resolution
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exresnte")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_resolve_node_to_value
+ *
+ * PARAMETERS:  object_ptr      - Pointer to a location that contains
+ *                                a pointer to a NS node, and will receive a
+ *                                pointer to the resolved object.
+ *              walk_state      - Current state.  Valid only if executing AML
+ *                                code.  NULL if simply resolving an object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Resolve a Namespace node to a valued object
+ *
+ * Note: for some of the data types, the pointer attached to the Node
+ * can be either a pointer to an actual internal object or a pointer into the
+ * AML stream itself.  These types are currently:
+ *
+ *      ACPI_TYPE_INTEGER
+ *      ACPI_TYPE_STRING
+ *      ACPI_TYPE_BUFFER
+ *      ACPI_TYPE_MUTEX
+ *      ACPI_TYPE_PACKAGE
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_resolve_node_to_value (
+	struct acpi_namespace_node      **object_ptr,
+	struct acpi_walk_state          *walk_state)
+
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *source_desc;
+	union acpi_operand_object       *obj_desc = NULL;
+	struct acpi_namespace_node      *node;
+	acpi_object_type                entry_type;
+
+
+	ACPI_FUNCTION_TRACE ("ex_resolve_node_to_value");
+
+
+	/*
+	 * The stack pointer points to a struct acpi_namespace_node (Node).  Get the
+	 * object that is attached to the Node.
+	 */
+	node       = *object_ptr;
+	source_desc = acpi_ns_get_attached_object (node);
+	entry_type = acpi_ns_get_type ((acpi_handle) node);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Entry=%p source_desc=%p [%s]\n",
+		 node, source_desc, acpi_ut_get_type_name (entry_type)));
+
+	if ((entry_type == ACPI_TYPE_LOCAL_ALIAS) ||
+		(entry_type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
+		/* There is always exactly one level of indirection */
+
+		node       = ACPI_CAST_PTR (struct acpi_namespace_node, node->object);
+		source_desc = acpi_ns_get_attached_object (node);
+		entry_type = acpi_ns_get_type ((acpi_handle) node);
+		*object_ptr = node;
+	}
+
+	/*
+	 * Several object types require no further processing:
+	 * 1) Devices rarely have an attached object, return the Node
+	 * 2) Method locals and arguments have a pseudo-Node
+	 */
+	if (entry_type == ACPI_TYPE_DEVICE ||
+		(node->flags & (ANOBJ_METHOD_ARG | ANOBJ_METHOD_LOCAL))) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	if (!source_desc) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No object attached to node %p\n",
+			node));
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	/*
+	 * Action is based on the type of the Node, which indicates the type
+	 * of the attached object or pointer
+	 */
+	switch (entry_type) {
+	case ACPI_TYPE_PACKAGE:
+
+		if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_PACKAGE) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a Package, type %s\n",
+				acpi_ut_get_object_type_name (source_desc)));
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		status = acpi_ds_get_package_arguments (source_desc);
+		if (ACPI_SUCCESS (status)) {
+			/* Return an additional reference to the object */
+
+			obj_desc = source_desc;
+			acpi_ut_add_reference (obj_desc);
+		}
+		break;
+
+
+	case ACPI_TYPE_BUFFER:
+
+		if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_BUFFER) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a Buffer, type %s\n",
+				acpi_ut_get_object_type_name (source_desc)));
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		status = acpi_ds_get_buffer_arguments (source_desc);
+		if (ACPI_SUCCESS (status)) {
+			/* Return an additional reference to the object */
+
+			obj_desc = source_desc;
+			acpi_ut_add_reference (obj_desc);
+		}
+		break;
+
+
+	case ACPI_TYPE_STRING:
+
+		if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_STRING) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a String, type %s\n",
+				acpi_ut_get_object_type_name (source_desc)));
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		/* Return an additional reference to the object */
+
+		obj_desc = source_desc;
+		acpi_ut_add_reference (obj_desc);
+		break;
+
+
+	case ACPI_TYPE_INTEGER:
+
+		if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_INTEGER) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a Integer, type %s\n",
+				acpi_ut_get_object_type_name (source_desc)));
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		/* Return an additional reference to the object */
+
+		obj_desc = source_desc;
+		acpi_ut_add_reference (obj_desc);
+		break;
+
+
+	case ACPI_TYPE_BUFFER_FIELD:
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "field_read Node=%p source_desc=%p Type=%X\n",
+			node, source_desc, entry_type));
+
+		status = acpi_ex_read_data_from_field (walk_state, source_desc, &obj_desc);
+		break;
+
+	/*
+	 * For these objects, just return the object attached to the Node
+	 */
+	case ACPI_TYPE_MUTEX:
+	case ACPI_TYPE_METHOD:
+	case ACPI_TYPE_POWER:
+	case ACPI_TYPE_PROCESSOR:
+	case ACPI_TYPE_THERMAL:
+	case ACPI_TYPE_EVENT:
+	case ACPI_TYPE_REGION:
+
+		/* Return an additional reference to the object */
+
+		obj_desc = source_desc;
+		acpi_ut_add_reference (obj_desc);
+		break;
+
+
+	/* TYPE_ANY is untyped, and thus there is no object associated with it */
+
+	case ACPI_TYPE_ANY:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Untyped entry %p, no attached object!\n",
+			node));
+
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);  /* Cannot be AE_TYPE */
+
+
+	case ACPI_TYPE_LOCAL_REFERENCE:
+
+		switch (source_desc->reference.opcode) {
+		case AML_LOAD_OP:
+
+			/* This is a ddb_handle */
+			/* Return an additional reference to the object */
+
+			obj_desc = source_desc;
+			acpi_ut_add_reference (obj_desc);
+			break;
+
+		default:
+			/* No named references are allowed here */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unsupported Reference opcode %X (%s)\n",
+				source_desc->reference.opcode,
+				acpi_ps_get_opcode_name (source_desc->reference.opcode)));
+
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+
+	/* Default case is for unknown types */
+
+	default:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Node %p - Unknown object type %X\n",
+			node, entry_type));
+
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+
+	} /* switch (entry_type) */
+
+
+	/* Put the object descriptor on the stack */
+
+	*object_ptr = (void *) obj_desc;
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c
new file mode 100644
index 0000000..7be6049
--- /dev/null
+++ b/drivers/acpi/executer/exresolv.c
@@ -0,0 +1,546 @@
+
+/******************************************************************************
+ *
+ * Module Name: exresolv - AML Interpreter object resolution
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acparser.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exresolv")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_resolve_to_value
+ *
+ * PARAMETERS:  **stack_ptr         - Points to entry on obj_stack, which can
+ *                                    be either an (union acpi_operand_object *)
+ *                                    or an acpi_handle.
+ *              walk_state          - Current method state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Convert Reference objects to values
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_resolve_to_value (
+	union acpi_operand_object       **stack_ptr,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_resolve_to_value", stack_ptr);
+
+
+	if (!stack_ptr || !*stack_ptr) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Internal - null pointer\n"));
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	/*
+	 * The entity pointed to by the stack_ptr can be either
+	 * 1) A valid union acpi_operand_object, or
+	 * 2) A struct acpi_namespace_node (named_obj)
+	 */
+	if (ACPI_GET_DESCRIPTOR_TYPE (*stack_ptr) == ACPI_DESC_TYPE_OPERAND) {
+		status = acpi_ex_resolve_object_to_value (stack_ptr, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	/*
+	 * Object on the stack may have changed if acpi_ex_resolve_object_to_value()
+	 * was called (i.e., we can't use an _else_ here.)
+	 */
+	if (ACPI_GET_DESCRIPTOR_TYPE (*stack_ptr) == ACPI_DESC_TYPE_NAMED) {
+		status = acpi_ex_resolve_node_to_value (
+				  ACPI_CAST_INDIRECT_PTR (struct acpi_namespace_node, stack_ptr),
+				  walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Resolved object %p\n", *stack_ptr));
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_resolve_object_to_value
+ *
+ * PARAMETERS:  stack_ptr       - Pointer to a stack location that contains a
+ *                                ptr to an internal object.
+ *              walk_state      - Current method state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Retrieve the value from an internal object.  The Reference type
+ *              uses the associated AML opcode to determine the value.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_resolve_object_to_value (
+	union acpi_operand_object       **stack_ptr,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *stack_desc;
+	void                            *temp_node;
+	union acpi_operand_object       *obj_desc;
+	u16                             opcode;
+
+
+	ACPI_FUNCTION_TRACE ("ex_resolve_object_to_value");
+
+
+	stack_desc = *stack_ptr;
+
+	/* This is an union acpi_operand_object    */
+
+	switch (ACPI_GET_OBJECT_TYPE (stack_desc)) {
+	case ACPI_TYPE_LOCAL_REFERENCE:
+
+		opcode = stack_desc->reference.opcode;
+
+		switch (opcode) {
+		case AML_NAME_OP:
+
+			/*
+			 * Convert indirect name ptr to a direct name ptr.
+			 * Then, acpi_ex_resolve_node_to_value can be used to get the value
+			 */
+			temp_node = stack_desc->reference.object;
+
+			/* Delete the Reference Object */
+
+			acpi_ut_remove_reference (stack_desc);
+
+			/* Put direct name pointer onto stack and exit */
+
+			(*stack_ptr) = temp_node;
+			break;
+
+
+		case AML_LOCAL_OP:
+		case AML_ARG_OP:
+
+			/*
+			 * Get the local from the method's state info
+			 * Note: this increments the local's object reference count
+			 */
+			status = acpi_ds_method_data_get_value (opcode,
+					  stack_desc->reference.offset, walk_state, &obj_desc);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[Arg/Local %X] value_obj is %p\n",
+				stack_desc->reference.offset, obj_desc));
+
+			/*
+			 * Now we can delete the original Reference Object and
+			 * replace it with the resolved value
+			 */
+			acpi_ut_remove_reference (stack_desc);
+			*stack_ptr = obj_desc;
+			break;
+
+
+		case AML_INDEX_OP:
+
+			switch (stack_desc->reference.target_type) {
+			case ACPI_TYPE_BUFFER_FIELD:
+
+				/* Just return - leave the Reference on the stack */
+				break;
+
+
+			case ACPI_TYPE_PACKAGE:
+
+				obj_desc = *stack_desc->reference.where;
+				if (obj_desc) {
+					/*
+					 * Valid obj descriptor, copy pointer to return value
+					 * (i.e., dereference the package index)
+					 * Delete the ref object, increment the returned object
+					 */
+					acpi_ut_remove_reference (stack_desc);
+					acpi_ut_add_reference (obj_desc);
+					*stack_ptr = obj_desc;
+				}
+				else {
+					/*
+					 * A NULL object descriptor means an unitialized element of
+					 * the package, can't dereference it
+					 */
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"Attempt to deref an Index to NULL pkg element Idx=%p\n",
+						stack_desc));
+					status = AE_AML_UNINITIALIZED_ELEMENT;
+				}
+				break;
+
+
+			default:
+
+				/* Invalid reference object */
+
+				ACPI_REPORT_ERROR ((
+					"During resolve, Unknown target_type %X in Index/Reference obj %p\n",
+					stack_desc->reference.target_type, stack_desc));
+				status = AE_AML_INTERNAL;
+				break;
+			}
+			break;
+
+
+		case AML_REF_OF_OP:
+		case AML_DEBUG_OP:
+		case AML_LOAD_OP:
+
+			/* Just leave the object as-is */
+
+			break;
+
+
+		default:
+
+			ACPI_REPORT_ERROR (("During resolve, Unknown Reference opcode %X (%s) in %p\n",
+				opcode, acpi_ps_get_opcode_name (opcode), stack_desc));
+			status = AE_AML_INTERNAL;
+			break;
+		}
+		break;
+
+
+	case ACPI_TYPE_BUFFER:
+
+		status = acpi_ds_get_buffer_arguments (stack_desc);
+		break;
+
+
+	case ACPI_TYPE_PACKAGE:
+
+		status = acpi_ds_get_package_arguments (stack_desc);
+		break;
+
+
+	/*
+	 * These cases may never happen here, but just in case..
+	 */
+	case ACPI_TYPE_BUFFER_FIELD:
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "field_read source_desc=%p Type=%X\n",
+			stack_desc, ACPI_GET_OBJECT_TYPE (stack_desc)));
+
+		status = acpi_ex_read_data_from_field (walk_state, stack_desc, &obj_desc);
+		*stack_ptr = (void *) obj_desc;
+		break;
+
+	default:
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_resolve_multiple
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *              Operand             - Starting point for resolution
+ *              return_type         - Where the object type is returned
+ *              return_desc         - Where the resolved object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Return the base object and type.  Traverse a reference list if
+ *              necessary to get to the base object.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_resolve_multiple (
+	struct acpi_walk_state          *walk_state,
+	union acpi_operand_object       *operand,
+	acpi_object_type                *return_type,
+	union acpi_operand_object       **return_desc)
+{
+	union acpi_operand_object       *obj_desc = (void *) operand;
+	struct acpi_namespace_node      *node;
+	acpi_object_type                type;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("acpi_ex_resolve_multiple");
+
+
+	/*
+	 * Operand can be either a namespace node or an operand descriptor
+	 */
+	switch (ACPI_GET_DESCRIPTOR_TYPE (obj_desc)) {
+	case ACPI_DESC_TYPE_OPERAND:
+		type = obj_desc->common.type;
+		break;
+
+	case ACPI_DESC_TYPE_NAMED:
+		type = ((struct acpi_namespace_node *) obj_desc)->type;
+		obj_desc = acpi_ns_get_attached_object ((struct acpi_namespace_node *) obj_desc);
+
+		/* If we had an Alias node, use the attached object for type info */
+
+		if (type == ACPI_TYPE_LOCAL_ALIAS) {
+			type = ((struct acpi_namespace_node *) obj_desc)->type;
+			obj_desc = acpi_ns_get_attached_object ((struct acpi_namespace_node *) obj_desc);
+		}
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+	}
+
+
+	/*
+	 * If type is anything other than a reference, we are done
+	 */
+	if (type != ACPI_TYPE_LOCAL_REFERENCE) {
+		goto exit;
+	}
+
+	/*
+	 * For reference objects created via the ref_of or Index operators,
+	 * we need to get to the base object (as per the ACPI specification
+	 * of the object_type and size_of operators). This means traversing
+	 * the list of possibly many nested references.
+	 */
+	while (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_LOCAL_REFERENCE) {
+		switch (obj_desc->reference.opcode) {
+		case AML_REF_OF_OP:
+
+			/* Dereference the reference pointer */
+
+			node = obj_desc->reference.object;
+
+			/* All "References" point to a NS node */
+
+			if (ACPI_GET_DESCRIPTOR_TYPE (node) != ACPI_DESC_TYPE_NAMED) {
+				ACPI_REPORT_ERROR (("acpi_ex_resolve_multiple: Not a NS node %p [%s]\n",
+						node, acpi_ut_get_descriptor_name (node)));
+				return_ACPI_STATUS (AE_AML_INTERNAL);
+			}
+
+			/* Get the attached object */
+
+			obj_desc = acpi_ns_get_attached_object (node);
+			if (!obj_desc) {
+				/* No object, use the NS node type */
+
+				type = acpi_ns_get_type (node);
+				goto exit;
+			}
+
+			/* Check for circular references */
+
+			if (obj_desc == operand) {
+				return_ACPI_STATUS (AE_AML_CIRCULAR_REFERENCE);
+			}
+			break;
+
+
+		case AML_INDEX_OP:
+
+			/* Get the type of this reference (index into another object) */
+
+			type = obj_desc->reference.target_type;
+			if (type != ACPI_TYPE_PACKAGE) {
+				goto exit;
+			}
+
+			/*
+			 * The main object is a package, we want to get the type
+			 * of the individual package element that is referenced by
+			 * the index.
+			 *
+			 * This could of course in turn be another reference object.
+			 */
+			obj_desc = *(obj_desc->reference.where);
+			if (!obj_desc) {
+				/* NULL package elements are allowed */
+
+				type = 0; /* Uninitialized */
+				goto exit;
+			}
+			break;
+
+
+		case AML_INT_NAMEPATH_OP:
+
+			/* Dereference the reference pointer */
+
+			node = obj_desc->reference.node;
+
+			/* All "References" point to a NS node */
+
+			if (ACPI_GET_DESCRIPTOR_TYPE (node) != ACPI_DESC_TYPE_NAMED) {
+				ACPI_REPORT_ERROR (("acpi_ex_resolve_multiple: Not a NS node %p [%s]\n",
+						node, acpi_ut_get_descriptor_name (node)));
+			   return_ACPI_STATUS (AE_AML_INTERNAL);
+			}
+
+			/* Get the attached object */
+
+			obj_desc = acpi_ns_get_attached_object (node);
+			if (!obj_desc) {
+				/* No object, use the NS node type */
+
+				type = acpi_ns_get_type (node);
+				goto exit;
+			}
+
+			/* Check for circular references */
+
+			if (obj_desc == operand) {
+				return_ACPI_STATUS (AE_AML_CIRCULAR_REFERENCE);
+			}
+			break;
+
+
+		case AML_LOCAL_OP:
+		case AML_ARG_OP:
+
+			if (return_desc) {
+				status = acpi_ds_method_data_get_value (obj_desc->reference.opcode,
+						  obj_desc->reference.offset, walk_state, &obj_desc);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+				acpi_ut_remove_reference (obj_desc);
+			}
+			else {
+				status = acpi_ds_method_data_get_node (obj_desc->reference.opcode,
+						 obj_desc->reference.offset, walk_state, &node);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+
+				obj_desc = acpi_ns_get_attached_object (node);
+				if (!obj_desc) {
+					type = ACPI_TYPE_ANY;
+					goto exit;
+				}
+			}
+			break;
+
+
+		case AML_DEBUG_OP:
+
+			/* The Debug Object is of type "debug_object" */
+
+			type = ACPI_TYPE_DEBUG_OBJECT;
+			goto exit;
+
+
+		default:
+
+			ACPI_REPORT_ERROR (("acpi_ex_resolve_multiple: Unknown Reference subtype %X\n",
+				obj_desc->reference.opcode));
+			return_ACPI_STATUS (AE_AML_INTERNAL);
+		}
+	}
+
+	/*
+	 * Now we are guaranteed to have an object that has not been created
+	 * via the ref_of or Index operators.
+	 */
+	type = ACPI_GET_OBJECT_TYPE (obj_desc);
+
+
+exit:
+	/* Convert internal types to external types */
+
+	switch (type) {
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		type = ACPI_TYPE_FIELD_UNIT;
+		break;
+
+	case ACPI_TYPE_LOCAL_SCOPE:
+
+		/* Per ACPI Specification, Scope is untyped */
+
+		type = ACPI_TYPE_ANY;
+		break;
+
+	default:
+		/* No change to Type required */
+		break;
+	}
+
+	*return_type = type;
+	if (return_desc) {
+		*return_desc = obj_desc;
+	}
+	return_ACPI_STATUS (AE_OK);
+}
+
+
diff --git a/drivers/acpi/executer/exresop.c b/drivers/acpi/executer/exresop.c
new file mode 100644
index 0000000..c928902
--- /dev/null
+++ b/drivers/acpi/executer/exresop.c
@@ -0,0 +1,661 @@
+
+/******************************************************************************
+ *
+ * Module Name: exresop - AML Interpreter operand/object resolution
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/amlcode.h>
+#include <acpi/acparser.h>
+#include <acpi/acinterp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exresop")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_check_object_type
+ *
+ * PARAMETERS:  type_needed         Object type needed
+ *              this_type           Actual object type
+ *              Object              Object pointer
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Check required type against actual type
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_check_object_type (
+	acpi_object_type                type_needed,
+	acpi_object_type                this_type,
+	void                            *object)
+{
+	ACPI_FUNCTION_NAME ("ex_check_object_type");
+
+
+	if (type_needed == ACPI_TYPE_ANY) {
+		/* All types OK, so we don't perform any typechecks */
+
+		return (AE_OK);
+	}
+
+	if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) {
+		/*
+		 * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
+		 * objects and thus allow them to be targets.  (As per the ACPI
+		 * specification, a store to a constant is a noop.)
+		 */
+		if ((this_type == ACPI_TYPE_INTEGER) &&
+			(((union acpi_operand_object *) object)->common.flags & AOPOBJ_AML_CONSTANT)) {
+			return (AE_OK);
+		}
+	}
+
+	if (type_needed != this_type) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Needed [%s], found [%s] %p\n",
+			acpi_ut_get_type_name (type_needed),
+			acpi_ut_get_type_name (this_type), object));
+
+		return (AE_AML_OPERAND_TYPE);
+	}
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_resolve_operands
+ *
+ * PARAMETERS:  Opcode              - Opcode being interpreted
+ *              stack_ptr           - Pointer to the operand stack to be
+ *                                    resolved
+ *              walk_state          - Current state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Convert multiple input operands to the types required by the
+ *              target operator.
+ *
+ *      Each 5-bit group in arg_types represents one required
+ *      operand and indicates the required Type. The corresponding operand
+ *      will be converted to the required type if possible, otherwise we
+ *      abort with an exception.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_resolve_operands (
+	u16                             opcode,
+	union acpi_operand_object       **stack_ptr,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status = AE_OK;
+	u8                              object_type;
+	void                            *temp_node;
+	u32                             arg_types;
+	const struct acpi_opcode_info   *op_info;
+	u32                             this_arg_type;
+	acpi_object_type                type_needed;
+
+
+	ACPI_FUNCTION_TRACE_U32 ("ex_resolve_operands", opcode);
+
+
+	op_info = acpi_ps_get_opcode_info (opcode);
+	if (op_info->class == AML_CLASS_UNKNOWN) {
+		return_ACPI_STATUS (AE_AML_BAD_OPCODE);
+	}
+
+	arg_types = op_info->runtime_args;
+	if (arg_types == ARGI_INVALID_OPCODE) {
+		ACPI_REPORT_ERROR (("resolve_operands: %X is not a valid AML opcode\n",
+			opcode));
+
+		return_ACPI_STATUS (AE_AML_INTERNAL);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Opcode %X [%s] required_operand_types=%8.8X \n",
+		opcode, op_info->name, arg_types));
+
+	/*
+	 * Normal exit is with (arg_types == 0) at end of argument list.
+	 * Function will return an exception from within the loop upon
+	 * finding an entry which is not (or cannot be converted
+	 * to) the required type; if stack underflows; or upon
+	 * finding a NULL stack entry (which should not happen).
+	 */
+	while (GET_CURRENT_ARG_TYPE (arg_types)) {
+		if (!stack_ptr || !*stack_ptr) {
+			ACPI_REPORT_ERROR (("resolve_operands: Null stack entry at %p\n",
+				stack_ptr));
+
+			return_ACPI_STATUS (AE_AML_INTERNAL);
+		}
+
+		/* Extract useful items */
+
+		obj_desc = *stack_ptr;
+
+		/* Decode the descriptor type */
+
+		switch (ACPI_GET_DESCRIPTOR_TYPE (obj_desc)) {
+		case ACPI_DESC_TYPE_NAMED:
+
+			/* Node */
+
+			object_type = ((struct acpi_namespace_node *) obj_desc)->type;
+			break;
+
+
+		case ACPI_DESC_TYPE_OPERAND:
+
+			/* ACPI internal object */
+
+			object_type = ACPI_GET_OBJECT_TYPE (obj_desc);
+
+			/* Check for bad acpi_object_type */
+
+			if (!acpi_ut_valid_object_type (object_type)) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Bad operand object type [%X]\n",
+					object_type));
+
+				return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			}
+
+			if (object_type == (u8) ACPI_TYPE_LOCAL_REFERENCE) {
+				/*
+				 * Decode the Reference
+				 */
+				op_info = acpi_ps_get_opcode_info (opcode);
+				if (op_info->class == AML_CLASS_UNKNOWN) {
+					return_ACPI_STATUS (AE_AML_BAD_OPCODE);
+				}
+
+				switch (obj_desc->reference.opcode) {
+				case AML_DEBUG_OP:
+				case AML_NAME_OP:
+				case AML_INDEX_OP:
+				case AML_REF_OF_OP:
+				case AML_ARG_OP:
+				case AML_LOCAL_OP:
+				case AML_LOAD_OP:   /* ddb_handle from LOAD_OP or LOAD_TABLE_OP */
+
+					ACPI_DEBUG_ONLY_MEMBERS (ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+						"Operand is a Reference, ref_opcode [%s]\n",
+						(acpi_ps_get_opcode_info (obj_desc->reference.opcode))->name)));
+					break;
+
+				default:
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"Operand is a Reference, Unknown Reference Opcode %X [%s]\n",
+						obj_desc->reference.opcode,
+						(acpi_ps_get_opcode_info (obj_desc->reference.opcode))->name));
+
+					return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+				}
+			}
+			break;
+
+
+		default:
+
+			/* Invalid descriptor */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Invalid descriptor %p [%s]\n",
+					obj_desc, acpi_ut_get_descriptor_name (obj_desc)));
+
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+
+		/*
+		 * Get one argument type, point to the next
+		 */
+		this_arg_type = GET_CURRENT_ARG_TYPE (arg_types);
+		INCREMENT_ARG_LIST (arg_types);
+
+		/*
+		 * Handle cases where the object does not need to be
+		 * resolved to a value
+		 */
+		switch (this_arg_type) {
+		case ARGI_REF_OR_STRING:        /* Can be a String or Reference */
+
+			if ((ACPI_GET_DESCRIPTOR_TYPE (obj_desc) == ACPI_DESC_TYPE_OPERAND) &&
+				(ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_STRING)) {
+				/*
+				 * String found - the string references a named object and must be
+				 * resolved to a node
+				 */
+				goto next_operand;
+			}
+
+			/* Else not a string - fall through to the normal Reference case below */
+			/*lint -fallthrough */
+
+		case ARGI_REFERENCE:            /* References: */
+		case ARGI_INTEGER_REF:
+		case ARGI_OBJECT_REF:
+		case ARGI_DEVICE_REF:
+		case ARGI_TARGETREF:            /* Allows implicit conversion rules before store */
+		case ARGI_FIXED_TARGET:         /* No implicit conversion before store to target */
+		case ARGI_SIMPLE_TARGET:        /* Name, Local, or Arg - no implicit conversion  */
+
+			/* Need an operand of type ACPI_TYPE_LOCAL_REFERENCE */
+
+			if (ACPI_GET_DESCRIPTOR_TYPE (obj_desc) == ACPI_DESC_TYPE_NAMED) /* Node (name) ptr OK as-is */ {
+				goto next_operand;
+			}
+
+			status = acpi_ex_check_object_type (ACPI_TYPE_LOCAL_REFERENCE,
+					  object_type, obj_desc);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+
+			if (AML_NAME_OP == obj_desc->reference.opcode) {
+				/*
+				 * Convert an indirect name ptr to direct name ptr and put
+				 * it on the stack
+				 */
+				temp_node = obj_desc->reference.object;
+				acpi_ut_remove_reference (obj_desc);
+				(*stack_ptr) = temp_node;
+			}
+			goto next_operand;
+
+
+		case ARGI_DATAREFOBJ:  /* Store operator only */
+
+			/*
+			 * We don't want to resolve index_op reference objects during
+			 * a store because this would be an implicit de_ref_of operation.
+			 * Instead, we just want to store the reference object.
+			 * -- All others must be resolved below.
+			 */
+			if ((opcode == AML_STORE_OP) &&
+				(ACPI_GET_OBJECT_TYPE (*stack_ptr) == ACPI_TYPE_LOCAL_REFERENCE) &&
+				((*stack_ptr)->reference.opcode == AML_INDEX_OP)) {
+				goto next_operand;
+			}
+			break;
+
+		default:
+			/* All cases covered above */
+			break;
+		}
+
+
+		/*
+		 * Resolve this object to a value
+		 */
+		status = acpi_ex_resolve_to_value (stack_ptr, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/* Get the resolved object */
+
+		obj_desc = *stack_ptr;
+
+		/*
+		 * Check the resulting object (value) type
+		 */
+		switch (this_arg_type) {
+		/*
+		 * For the simple cases, only one type of resolved object
+		 * is allowed
+		 */
+		case ARGI_MUTEX:
+
+			/* Need an operand of type ACPI_TYPE_MUTEX */
+
+			type_needed = ACPI_TYPE_MUTEX;
+			break;
+
+		case ARGI_EVENT:
+
+			/* Need an operand of type ACPI_TYPE_EVENT */
+
+			type_needed = ACPI_TYPE_EVENT;
+			break;
+
+		case ARGI_PACKAGE:   /* Package */
+
+			/* Need an operand of type ACPI_TYPE_PACKAGE */
+
+			type_needed = ACPI_TYPE_PACKAGE;
+			break;
+
+		case ARGI_ANYTYPE:
+
+			/* Any operand type will do */
+
+			type_needed = ACPI_TYPE_ANY;
+			break;
+
+		case ARGI_DDBHANDLE:
+
+			/* Need an operand of type ACPI_TYPE_DDB_HANDLE */
+
+			type_needed = ACPI_TYPE_LOCAL_REFERENCE;
+			break;
+
+
+		/*
+		 * The more complex cases allow multiple resolved object types
+		 */
+		case ARGI_INTEGER:   /* Number */
+
+			/*
+			 * Need an operand of type ACPI_TYPE_INTEGER,
+			 * But we can implicitly convert from a STRING or BUFFER
+			 * Aka - "Implicit Source Operand Conversion"
+			 */
+			status = acpi_ex_convert_to_integer (obj_desc, stack_ptr, 16);
+			if (ACPI_FAILURE (status)) {
+				if (status == AE_TYPE) {
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"Needed [Integer/String/Buffer], found [%s] %p\n",
+						acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+					return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+				}
+
+				return_ACPI_STATUS (status);
+			}
+			goto next_operand;
+
+
+		case ARGI_BUFFER:
+
+			/*
+			 * Need an operand of type ACPI_TYPE_BUFFER,
+			 * But we can implicitly convert from a STRING or INTEGER
+			 * Aka - "Implicit Source Operand Conversion"
+			 */
+			status = acpi_ex_convert_to_buffer (obj_desc, stack_ptr);
+			if (ACPI_FAILURE (status)) {
+				if (status == AE_TYPE) {
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"Needed [Integer/String/Buffer], found [%s] %p\n",
+						acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+					return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+				}
+
+				return_ACPI_STATUS (status);
+			}
+			goto next_operand;
+
+
+		case ARGI_STRING:
+
+			/*
+			 * Need an operand of type ACPI_TYPE_STRING,
+			 * But we can implicitly convert from a BUFFER or INTEGER
+			 * Aka - "Implicit Source Operand Conversion"
+			 */
+			status = acpi_ex_convert_to_string (obj_desc, stack_ptr,
+					 ACPI_IMPLICIT_CONVERT_HEX);
+			if (ACPI_FAILURE (status)) {
+				if (status == AE_TYPE) {
+					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+						"Needed [Integer/String/Buffer], found [%s] %p\n",
+						acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+					return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+				}
+
+				return_ACPI_STATUS (status);
+			}
+			goto next_operand;
+
+
+		case ARGI_COMPUTEDATA:
+
+			/* Need an operand of type INTEGER, STRING or BUFFER */
+
+			switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+			case ACPI_TYPE_INTEGER:
+			case ACPI_TYPE_STRING:
+			case ACPI_TYPE_BUFFER:
+
+				/* Valid operand */
+			   break;
+
+			default:
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Needed [Integer/String/Buffer], found [%s] %p\n",
+					acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+				return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			}
+			goto next_operand;
+
+
+		case ARGI_BUFFER_OR_STRING:
+
+			/* Need an operand of type STRING or BUFFER */
+
+			switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+			case ACPI_TYPE_STRING:
+			case ACPI_TYPE_BUFFER:
+
+				/* Valid operand */
+			   break;
+
+			case ACPI_TYPE_INTEGER:
+
+				/* Highest priority conversion is to type Buffer */
+
+				status = acpi_ex_convert_to_buffer (obj_desc, stack_ptr);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+				break;
+
+			default:
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Needed [Integer/String/Buffer], found [%s] %p\n",
+					acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+				return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			}
+			goto next_operand;
+
+
+		case ARGI_DATAOBJECT:
+			/*
+			 * ARGI_DATAOBJECT is only used by the size_of operator.
+			 * Need a buffer, string, package, or ref_of reference.
+			 *
+			 * The only reference allowed here is a direct reference to
+			 * a namespace node.
+			 */
+			switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+			case ACPI_TYPE_PACKAGE:
+			case ACPI_TYPE_STRING:
+			case ACPI_TYPE_BUFFER:
+			case ACPI_TYPE_LOCAL_REFERENCE:
+
+				/* Valid operand */
+				break;
+
+			default:
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Needed [Buffer/String/Package/Reference], found [%s] %p\n",
+					acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+				return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			}
+			goto next_operand;
+
+
+		case ARGI_COMPLEXOBJ:
+
+			/* Need a buffer or package or (ACPI 2.0) String */
+
+			switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+			case ACPI_TYPE_PACKAGE:
+			case ACPI_TYPE_STRING:
+			case ACPI_TYPE_BUFFER:
+
+				/* Valid operand */
+				break;
+
+			default:
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Needed [Buffer/String/Package], found [%s] %p\n",
+					acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+				return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			}
+			goto next_operand;
+
+
+		case ARGI_REGION_OR_FIELD:
+
+			/* Need an operand of type ACPI_TYPE_REGION or a FIELD in a region */
+
+			switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+			case ACPI_TYPE_REGION:
+			case ACPI_TYPE_LOCAL_REGION_FIELD:
+			case ACPI_TYPE_LOCAL_BANK_FIELD:
+			case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+				/* Valid operand */
+				break;
+
+			default:
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Needed [Region/region_field], found [%s] %p\n",
+					acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+				return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			}
+			goto next_operand;
+
+
+		case ARGI_DATAREFOBJ:
+
+			/* Used by the Store() operator only */
+
+			switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+			case ACPI_TYPE_INTEGER:
+			case ACPI_TYPE_PACKAGE:
+			case ACPI_TYPE_STRING:
+			case ACPI_TYPE_BUFFER:
+			case ACPI_TYPE_BUFFER_FIELD:
+			case ACPI_TYPE_LOCAL_REFERENCE:
+			case ACPI_TYPE_LOCAL_REGION_FIELD:
+			case ACPI_TYPE_LOCAL_BANK_FIELD:
+			case ACPI_TYPE_LOCAL_INDEX_FIELD:
+			case ACPI_TYPE_DDB_HANDLE:
+
+				/* Valid operand */
+				break;
+
+			default:
+
+				if (acpi_gbl_enable_interpreter_slack) {
+					/*
+					 * Enable original behavior of Store(), allowing any and all
+					 * objects as the source operand.  The ACPI spec does not
+					 * allow this, however.
+					 */
+					break;
+				}
+
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p\n",
+					acpi_ut_get_object_type_name (obj_desc), obj_desc));
+
+				return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+			}
+			goto next_operand;
+
+
+		default:
+
+			/* Unknown type */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Internal - Unknown ARGI (required operand) type %X\n",
+				this_arg_type));
+
+			return_ACPI_STATUS (AE_BAD_PARAMETER);
+		}
+
+		/*
+		 * Make sure that the original object was resolved to the
+		 * required object type (Simple cases only).
+		 */
+		status = acpi_ex_check_object_type (type_needed,
+				  ACPI_GET_OBJECT_TYPE (*stack_ptr), *stack_ptr);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+next_operand:
+		/*
+		 * If more operands needed, decrement stack_ptr to point
+		 * to next operand on stack
+		 */
+		if (GET_CURRENT_ARG_TYPE (arg_types)) {
+			stack_ptr--;
+		}
+
+	}   /* while (*Types) */
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c
new file mode 100644
index 0000000..e0fc6ab
--- /dev/null
+++ b/drivers/acpi/executer/exstore.c
@@ -0,0 +1,536 @@
+
+/******************************************************************************
+ *
+ * Module Name: exstore - AML Interpreter object store support
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exstore")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store
+ *
+ * PARAMETERS:  *source_desc        - Value to be stored
+ *              *dest_desc          - Where to store it.  Must be an NS node
+ *                                    or an union acpi_operand_object of type
+ *                                    Reference;
+ *              walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store the value described by source_desc into the location
+ *              described by dest_desc. Called by various interpreter
+ *              functions to store the result of an operation into
+ *              the destination operand -- not just simply the actual "Store"
+ *              ASL operator.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *dest_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *ref_desc = dest_desc;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_store", dest_desc);
+
+
+	/* Validate parameters */
+
+	if (!source_desc || !dest_desc) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Null parameter\n"));
+		return_ACPI_STATUS (AE_AML_NO_OPERAND);
+	}
+
+	/* dest_desc can be either a namespace node or an ACPI object */
+
+	if (ACPI_GET_DESCRIPTOR_TYPE (dest_desc) == ACPI_DESC_TYPE_NAMED) {
+		/*
+		 * Dest is a namespace node,
+		 * Storing an object into a Named node.
+		 */
+		status = acpi_ex_store_object_to_node (source_desc,
+				 (struct acpi_namespace_node *) dest_desc, walk_state,
+				 ACPI_IMPLICIT_CONVERSION);
+
+		return_ACPI_STATUS (status);
+	}
+
+	/* Destination object must be a Reference or a Constant object */
+
+	switch (ACPI_GET_OBJECT_TYPE (dest_desc)) {
+	case ACPI_TYPE_LOCAL_REFERENCE:
+		break;
+
+	case ACPI_TYPE_INTEGER:
+
+		/* Allow stores to Constants -- a Noop as per ACPI spec */
+
+		if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) {
+			return_ACPI_STATUS (AE_OK);
+		}
+
+		/*lint -fallthrough */
+
+	default:
+
+		/* Destination is not a Reference object */
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Target is not a Reference or Constant object - %s [%p]\n",
+			acpi_ut_get_object_type_name (dest_desc), dest_desc));
+
+		ACPI_DUMP_STACK_ENTRY (source_desc);
+		ACPI_DUMP_STACK_ENTRY (dest_desc);
+		ACPI_DUMP_OPERANDS (&dest_desc, ACPI_IMODE_EXECUTE, "ex_store",
+				  2, "Target is not a Reference or Constant object");
+
+		return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+	}
+
+	/*
+	 * Examine the Reference opcode.  These cases are handled:
+	 *
+	 * 1) Store to Name (Change the object associated with a name)
+	 * 2) Store to an indexed area of a Buffer or Package
+	 * 3) Store to a Method Local or Arg
+	 * 4) Store to the debug object
+	 */
+	switch (ref_desc->reference.opcode) {
+	case AML_NAME_OP:
+	case AML_REF_OF_OP:
+
+		/* Storing an object into a Name "container" */
+
+		status = acpi_ex_store_object_to_node (source_desc, ref_desc->reference.object,
+				  walk_state, ACPI_IMPLICIT_CONVERSION);
+		break;
+
+
+	case AML_INDEX_OP:
+
+		/* Storing to an Index (pointer into a packager or buffer) */
+
+		status = acpi_ex_store_object_to_index (source_desc, ref_desc, walk_state);
+		break;
+
+
+	case AML_LOCAL_OP:
+	case AML_ARG_OP:
+
+		/* Store to a method local/arg  */
+
+		status = acpi_ds_store_object_to_local (ref_desc->reference.opcode,
+				  ref_desc->reference.offset, source_desc, walk_state);
+		break;
+
+
+	case AML_DEBUG_OP:
+
+		/*
+		 * Storing to the Debug object causes the value stored to be
+		 * displayed and otherwise has no effect -- see ACPI Specification
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+			"**** Write to Debug Object: Object %p %s ****:\n\n",
+			source_desc, acpi_ut_get_object_type_name (source_desc)));
+
+		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[ACPI Debug] %s: ",
+			acpi_ut_get_object_type_name (source_desc)));
+
+		if (!acpi_ut_valid_internal_object (source_desc)) {
+		   ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT,
+			   "%p, Invalid Internal Object!\n", source_desc));
+		   break;
+		}
+
+		switch (ACPI_GET_OBJECT_TYPE (source_desc)) {
+		case ACPI_TYPE_INTEGER:
+
+			if (acpi_gbl_integer_byte_width == 4) {
+				ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X\n",
+					(u32) source_desc->integer.value));
+			}
+			else {
+				ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "0x%8.8X%8.8X\n",
+					ACPI_FORMAT_UINT64 (source_desc->integer.value)));
+			}
+			break;
+
+
+		case ACPI_TYPE_BUFFER:
+
+			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X]",
+				(u32) source_desc->buffer.length));
+			ACPI_DUMP_BUFFER (source_desc->buffer.pointer,
+				(source_desc->buffer.length < 32) ? source_desc->buffer.length : 32);
+			break;
+
+
+		case ACPI_TYPE_STRING:
+
+			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] \"%s\"\n",
+				source_desc->string.length, source_desc->string.pointer));
+			break;
+
+
+		case ACPI_TYPE_PACKAGE:
+
+			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] Elements Ptr - %p\n",
+				source_desc->package.count, source_desc->package.elements));
+			break;
+
+
+		default:
+
+			ACPI_DEBUG_PRINT_RAW ((ACPI_DB_DEBUG_OBJECT, "%p\n",
+				source_desc));
+			break;
+		}
+
+		ACPI_DEBUG_PRINT_RAW ((ACPI_DB_EXEC, "\n"));
+		break;
+
+
+	default:
+
+		ACPI_REPORT_ERROR (("ex_store: Unknown Reference opcode %X\n",
+			ref_desc->reference.opcode));
+		ACPI_DUMP_ENTRY (ref_desc, ACPI_LV_ERROR);
+
+		status = AE_AML_INTERNAL;
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_object_to_index
+ *
+ * PARAMETERS:  *source_desc            - Value to be stored
+ *              *dest_desc              - Named object to receive the value
+ *              walk_state              - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store the object to indexed Buffer or Package element
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_object_to_index (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *index_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *obj_desc;
+	union acpi_operand_object       *new_desc;
+	u8                              value = 0;
+	u32                             i;
+
+
+	ACPI_FUNCTION_TRACE ("ex_store_object_to_index");
+
+
+	/*
+	 * Destination must be a reference pointer, and
+	 * must point to either a buffer or a package
+	 */
+	switch (index_desc->reference.target_type) {
+	case ACPI_TYPE_PACKAGE:
+		/*
+		 * Storing to a package element. Copy the object and replace
+		 * any existing object with the new object. No implicit
+		 * conversion is performed.
+		 *
+		 * The object at *(index_desc->Reference.Where) is the
+		 * element within the package that is to be modified.
+		 * The parent package object is at index_desc->Reference.Object
+		 */
+		obj_desc = *(index_desc->reference.where);
+
+		status = acpi_ut_copy_iobject_to_iobject (source_desc, &new_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		if (obj_desc) {
+			/* Decrement reference count by the ref count of the parent package */
+
+			for (i = 0; i < ((union acpi_operand_object *) index_desc->reference.object)->common.reference_count; i++) {
+				acpi_ut_remove_reference (obj_desc);
+			}
+		}
+
+		*(index_desc->reference.where) = new_desc;
+
+		/* Increment reference count by the ref count of the parent package -1 */
+
+		for (i = 1; i < ((union acpi_operand_object *) index_desc->reference.object)->common.reference_count; i++) {
+			acpi_ut_add_reference (new_desc);
+		}
+
+		break;
+
+
+	case ACPI_TYPE_BUFFER_FIELD:
+
+		/*
+		 * Store into a Buffer or String (not actually a real buffer_field)
+		 * at a location defined by an Index.
+		 *
+		 * The first 8-bit element of the source object is written to the
+		 * 8-bit Buffer location defined by the Index destination object,
+		 * according to the ACPI 2.0 specification.
+		 */
+
+		/*
+		 * Make sure the target is a Buffer or String. An error should
+		 * not happen here, since the reference_object was constructed
+		 * by the INDEX_OP code.
+		 */
+		obj_desc = index_desc->reference.object;
+		if ((ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_BUFFER) &&
+			(ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_STRING)) {
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		/*
+		 * The assignment of the individual elements will be slightly
+		 * different for each source type.
+		 */
+		switch (ACPI_GET_OBJECT_TYPE (source_desc)) {
+		case ACPI_TYPE_INTEGER:
+
+			/* Use the least-significant byte of the integer */
+
+			value = (u8) (source_desc->integer.value);
+			break;
+
+		case ACPI_TYPE_BUFFER:
+		case ACPI_TYPE_STRING:
+
+			/* Note: Takes advantage of common string/buffer fields */
+
+			value = source_desc->buffer.pointer[0];
+			break;
+
+		default:
+
+			/* All other types are invalid */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Source must be Integer/Buffer/String type, not %s\n",
+				acpi_ut_get_object_type_name (source_desc)));
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		/* Store the source value into the target buffer byte */
+
+		obj_desc->buffer.pointer[index_desc->reference.offset] = value;
+		break;
+
+
+	default:
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			"Target is not a Package or buffer_field\n"));
+		status = AE_AML_OPERAND_TYPE;
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_object_to_node
+ *
+ * PARAMETERS:  source_desc             - Value to be stored
+ *              Node                    - Named object to receive the value
+ *              walk_state              - Current walk state
+ *              implicit_conversion     - Perform implicit conversion (yes/no)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Store the object to the named object.
+ *
+ *              The Assignment of an object to a named object is handled here
+ *              The value passed in will replace the current value (if any)
+ *              with the input value.
+ *
+ *              When storing into an object the data is converted to the
+ *              target object type then stored in the object.  This means
+ *              that the target object type (for an initialized target) will
+ *              not be changed by a store operation.
+ *
+ *              Assumes parameters are already validated.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_object_to_node (
+	union acpi_operand_object       *source_desc,
+	struct acpi_namespace_node      *node,
+	struct acpi_walk_state          *walk_state,
+	u8                              implicit_conversion)
+{
+	acpi_status                     status = AE_OK;
+	union acpi_operand_object       *target_desc;
+	union acpi_operand_object       *new_desc;
+	acpi_object_type                target_type;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_store_object_to_node", source_desc);
+
+
+	/*
+	 * Get current type of the node, and object attached to Node
+	 */
+	target_type = acpi_ns_get_type (node);
+	target_desc = acpi_ns_get_attached_object (node);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n",
+		source_desc, acpi_ut_get_object_type_name (source_desc),
+			  node, acpi_ut_get_type_name (target_type)));
+
+	/*
+	 * Resolve the source object to an actual value
+	 * (If it is a reference object)
+	 */
+	status = acpi_ex_resolve_object (&source_desc, target_type, walk_state);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* If no implicit conversion, drop into the default case below */
+
+	if (!implicit_conversion) {
+		/* Force execution of default (no implicit conversion) */
+
+		target_type = ACPI_TYPE_ANY;
+	}
+
+	/*
+	 * Do the actual store operation
+	 */
+	switch (target_type) {
+	case ACPI_TYPE_BUFFER_FIELD:
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+		/*
+		 * For fields, copy the source data to the target field.
+		 */
+		status = acpi_ex_write_data_to_field (source_desc, target_desc, &walk_state->result_obj);
+		break;
+
+
+	case ACPI_TYPE_INTEGER:
+	case ACPI_TYPE_STRING:
+	case ACPI_TYPE_BUFFER:
+
+		/*
+		 * These target types are all of type Integer/String/Buffer, and
+		 * therefore support implicit conversion before the store.
+		 *
+		 * Copy and/or convert the source object to a new target object
+		 */
+		status = acpi_ex_store_object_to_object (source_desc, target_desc, &new_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		if (new_desc != target_desc) {
+			/*
+			 * Store the new new_desc as the new value of the Name, and set
+			 * the Name's type to that of the value being stored in it.
+			 * source_desc reference count is incremented by attach_object.
+			 *
+			 * Note: This may change the type of the node if an explicit store
+			 * has been performed such that the node/object type has been
+			 * changed.
+			 */
+			status = acpi_ns_attach_object (node, new_desc, new_desc->common.type);
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+				"Store %s into %s via Convert/Attach\n",
+				acpi_ut_get_object_type_name (source_desc),
+				acpi_ut_get_object_type_name (new_desc)));
+		}
+		break;
+
+
+	default:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+			"Storing %s (%p) directly into node (%p), no implicit conversion\n",
+			acpi_ut_get_object_type_name (source_desc), source_desc, node));
+
+		/* No conversions for all other types.  Just attach the source object */
+
+		status = acpi_ns_attach_object (node, source_desc, ACPI_GET_OBJECT_TYPE (source_desc));
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exstoren.c b/drivers/acpi/executer/exstoren.c
new file mode 100644
index 0000000..d3677fe
--- /dev/null
+++ b/drivers/acpi/executer/exstoren.c
@@ -0,0 +1,306 @@
+
+/******************************************************************************
+ *
+ * Module Name: exstoren - AML Interpreter object store support,
+ *                        Store to Node (namespace object)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exstoren")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_resolve_object
+ *
+ * PARAMETERS:  source_desc_ptr     - Pointer to the source object
+ *              target_type         - Current type of the target
+ *              walk_state          - Current walk state
+ *
+ * RETURN:      Status, resolved object in source_desc_ptr.
+ *
+ * DESCRIPTION: Resolve an object.  If the object is a reference, dereference
+ *              it and return the actual object in the source_desc_ptr.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_resolve_object (
+	union acpi_operand_object       **source_desc_ptr,
+	acpi_object_type                target_type,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *source_desc = *source_desc_ptr;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_resolve_object");
+
+
+	/*
+	 * Ensure we have a Target that can be stored to
+	 */
+	switch (target_type) {
+	case ACPI_TYPE_BUFFER_FIELD:
+	case ACPI_TYPE_LOCAL_REGION_FIELD:
+	case ACPI_TYPE_LOCAL_BANK_FIELD:
+	case ACPI_TYPE_LOCAL_INDEX_FIELD:
+		/*
+		 * These cases all require only Integers or values that
+		 * can be converted to Integers (Strings or Buffers)
+		 */
+
+	case ACPI_TYPE_INTEGER:
+	case ACPI_TYPE_STRING:
+	case ACPI_TYPE_BUFFER:
+
+		/*
+		 * Stores into a Field/Region or into a Integer/Buffer/String
+		 * are all essentially the same.  This case handles the
+		 * "interchangeable" types Integer, String, and Buffer.
+		 */
+		if (ACPI_GET_OBJECT_TYPE (source_desc) == ACPI_TYPE_LOCAL_REFERENCE) {
+			/* Resolve a reference object first */
+
+			status = acpi_ex_resolve_to_value (source_desc_ptr, walk_state);
+			if (ACPI_FAILURE (status)) {
+				break;
+			}
+		}
+
+		/* For copy_object, no further validation necessary */
+
+		if (walk_state->opcode == AML_COPY_OP) {
+			break;
+		}
+
+		/*
+		 * Must have a Integer, Buffer, or String
+		 */
+		if ((ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_INTEGER)   &&
+			(ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_BUFFER)    &&
+			(ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_STRING)    &&
+			!((ACPI_GET_OBJECT_TYPE (source_desc) == ACPI_TYPE_LOCAL_REFERENCE) && (source_desc->reference.opcode == AML_LOAD_OP))) {
+			/*
+			 * Conversion successful but still not a valid type
+			 */
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Cannot assign type %s to %s (must be type Int/Str/Buf)\n",
+				acpi_ut_get_object_type_name (source_desc),
+				acpi_ut_get_type_name (target_type)));
+			status = AE_AML_OPERAND_TYPE;
+		}
+		break;
+
+
+	case ACPI_TYPE_LOCAL_ALIAS:
+	case ACPI_TYPE_LOCAL_METHOD_ALIAS:
+
+		/*
+		 * Aliases are resolved by acpi_ex_prep_operands
+		 */
+		ACPI_REPORT_ERROR (("Store into Alias - should never happen\n"));
+		status = AE_AML_INTERNAL;
+		break;
+
+
+	case ACPI_TYPE_PACKAGE:
+	default:
+
+		/*
+		 * All other types than Alias and the various Fields come here,
+		 * including the untyped case - ACPI_TYPE_ANY.
+		 */
+		break;
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_object_to_object
+ *
+ * PARAMETERS:  source_desc         - Object to store
+ *              dest_desc           - Object to receive a copy of the source
+ *              new_desc            - New object if dest_desc is obsoleted
+ *              walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: "Store" an object to another object.  This may include
+ *              converting the source type to the target type (implicit
+ *              conversion), and a copy of the value of the source to
+ *              the target.
+ *
+ *              The Assignment of an object to another (not named) object
+ *              is handled here.
+ *              The Source passed in will replace the current value (if any)
+ *              with the input value.
+ *
+ *              When storing into an object the data is converted to the
+ *              target object type then stored in the object.  This means
+ *              that the target object type (for an initialized target) will
+ *              not be changed by a store operation.
+ *
+ *              This module allows destination types of Number, String,
+ *              Buffer, and Package.
+ *
+ *              Assumes parameters are already validated.  NOTE: source_desc
+ *              resolution (from a reference object) must be performed by
+ *              the caller if necessary.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_object_to_object (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *dest_desc,
+	union acpi_operand_object       **new_desc,
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_operand_object       *actual_src_desc;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_store_object_to_object", source_desc);
+
+
+	actual_src_desc = source_desc;
+	if (!dest_desc) {
+		/*
+		 * There is no destination object (An uninitialized node or
+		 * package element), so we can simply copy the source object
+		 * creating a new destination object
+		 */
+		status = acpi_ut_copy_iobject_to_iobject (actual_src_desc, new_desc, walk_state);
+		return_ACPI_STATUS (status);
+	}
+
+	if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_GET_OBJECT_TYPE (dest_desc)) {
+		/*
+		 * The source type does not match the type of the destination.
+		 * Perform the "implicit conversion" of the source to the current type
+		 * of the target as per the ACPI specification.
+		 *
+		 * If no conversion performed, actual_src_desc = source_desc.
+		 * Otherwise, actual_src_desc is a temporary object to hold the
+		 * converted object.
+		 */
+		status = acpi_ex_convert_to_target_type (ACPI_GET_OBJECT_TYPE (dest_desc),
+				  source_desc, &actual_src_desc, walk_state);
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		if (source_desc == actual_src_desc) {
+			/*
+			 * No conversion was performed. Return the source_desc as the
+			 * new object.
+			 */
+			*new_desc = source_desc;
+			return_ACPI_STATUS (AE_OK);
+		}
+	}
+
+	/*
+	 * We now have two objects of identical types, and we can perform a
+	 * copy of the *value* of the source object.
+	 */
+	switch (ACPI_GET_OBJECT_TYPE (dest_desc)) {
+	case ACPI_TYPE_INTEGER:
+
+		dest_desc->integer.value = actual_src_desc->integer.value;
+
+		/* Truncate value if we are executing from a 32-bit ACPI table */
+
+		acpi_ex_truncate_for32bit_table (dest_desc);
+		break;
+
+	case ACPI_TYPE_STRING:
+
+		status = acpi_ex_store_string_to_string (actual_src_desc, dest_desc);
+		break;
+
+	case ACPI_TYPE_BUFFER:
+
+		/*
+		 * Note: There is different store behavior depending on the original
+		 * source type
+		 */
+		status = acpi_ex_store_buffer_to_buffer (actual_src_desc, dest_desc);
+		break;
+
+	case ACPI_TYPE_PACKAGE:
+
+		status = acpi_ut_copy_iobject_to_iobject (actual_src_desc, &dest_desc,
+				 walk_state);
+		break;
+
+	default:
+		/*
+		 * All other types come here.
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "Store into type %s not implemented\n",
+			acpi_ut_get_object_type_name (dest_desc)));
+
+		status = AE_NOT_IMPLEMENTED;
+		break;
+	}
+
+	if (actual_src_desc != source_desc) {
+		/* Delete the intermediate (temporary) source object */
+
+		acpi_ut_remove_reference (actual_src_desc);
+	}
+
+	*new_desc = dest_desc;
+	return_ACPI_STATUS (status);
+}
+
+
diff --git a/drivers/acpi/executer/exstorob.c b/drivers/acpi/executer/exstorob.c
new file mode 100644
index 0000000..05e1eca
--- /dev/null
+++ b/drivers/acpi/executer/exstorob.c
@@ -0,0 +1,216 @@
+
+/******************************************************************************
+ *
+ * Module Name: exstorob - AML Interpreter object store support, store to object
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exstorob")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_buffer_to_buffer
+ *
+ * PARAMETERS:  source_desc         - Source object to copy
+ *              target_desc         - Destination object of the copy
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Copy a buffer object to another buffer object.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_buffer_to_buffer (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc)
+{
+	u32                             length;
+	u8                              *buffer;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_store_buffer_to_buffer", source_desc);
+
+
+	/* We know that source_desc is a buffer by now */
+
+	buffer = (u8 *) source_desc->buffer.pointer;
+	length = source_desc->buffer.length;
+
+	/*
+	 * If target is a buffer of length zero or is a static buffer,
+	 * allocate a new buffer of the proper length
+	 */
+	if ((target_desc->buffer.length == 0) ||
+		(target_desc->common.flags & AOPOBJ_STATIC_POINTER)) {
+		target_desc->buffer.pointer = ACPI_MEM_ALLOCATE (length);
+		if (!target_desc->buffer.pointer) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		target_desc->buffer.length = length;
+	}
+
+	/* Copy source buffer to target buffer */
+
+	if (length <= target_desc->buffer.length) {
+		/* Clear existing buffer and copy in the new one */
+
+		ACPI_MEMSET (target_desc->buffer.pointer, 0, target_desc->buffer.length);
+		ACPI_MEMCPY (target_desc->buffer.pointer, buffer, length);
+
+#ifdef ACPI_OBSOLETE_BEHAVIOR
+		/*
+		 * NOTE: ACPI versions up to 3.0 specified that the buffer must be
+		 * truncated if the string is smaller than the buffer.  However, "other"
+		 * implementations of ACPI never did this and thus became the defacto
+		 * standard. ACPi 3.0_a changes this behavior such that the buffer
+		 * is no longer truncated.
+		 */
+
+		/*
+		 * OBSOLETE BEHAVIOR:
+		 * If the original source was a string, we must truncate the buffer,
+		 * according to the ACPI spec.  Integer-to-Buffer and Buffer-to-Buffer
+		 * copy must not truncate the original buffer.
+		 */
+		if (original_src_type == ACPI_TYPE_STRING) {
+			/* Set the new length of the target */
+
+			target_desc->buffer.length = length;
+		}
+#endif
+	}
+	else {
+		/* Truncate the source, copy only what will fit */
+
+		ACPI_MEMCPY (target_desc->buffer.pointer, buffer, target_desc->buffer.length);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+			"Truncating source buffer from %X to %X\n",
+			length, target_desc->buffer.length));
+	}
+
+	/* Copy flags */
+
+	target_desc->buffer.flags = source_desc->buffer.flags;
+	target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_string_to_string
+ *
+ * PARAMETERS:  source_desc         - Source object to copy
+ *              target_desc         - Destination object of the copy
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Copy a String object to another String object
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_string_to_string (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc)
+{
+	u32                             length;
+	u8                              *buffer;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_store_string_to_string", source_desc);
+
+
+	/* We know that source_desc is a string by now */
+
+	buffer = (u8 *) source_desc->string.pointer;
+	length = source_desc->string.length;
+
+	/*
+	 * Replace existing string value if it will fit and the string
+	 * pointer is not a static pointer (part of an ACPI table)
+	 */
+	if ((length < target_desc->string.length) &&
+	   (!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
+		/*
+		 * String will fit in existing non-static buffer.
+		 * Clear old string and copy in the new one
+		 */
+		ACPI_MEMSET (target_desc->string.pointer, 0, (acpi_size) target_desc->string.length + 1);
+		ACPI_MEMCPY (target_desc->string.pointer, buffer, length);
+	}
+	else {
+		/*
+		 * Free the current buffer, then allocate a new buffer
+		 * large enough to hold the value
+		 */
+		if (target_desc->string.pointer &&
+		   (!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
+			/* Only free if not a pointer into the DSDT */
+
+			ACPI_MEM_FREE (target_desc->string.pointer);
+		}
+
+		target_desc->string.pointer = ACPI_MEM_CALLOCATE ((acpi_size) length + 1);
+		if (!target_desc->string.pointer) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
+		ACPI_MEMCPY (target_desc->string.pointer, buffer, length);
+	}
+
+	/* Set the new target length */
+
+	target_desc->string.length = length;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c
new file mode 100644
index 0000000..f92efc5
--- /dev/null
+++ b/drivers/acpi/executer/exsystem.c
@@ -0,0 +1,378 @@
+
+/******************************************************************************
+ *
+ * Module Name: exsystem - Interface to OS services
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/acevents.h>
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exsystem")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_wait_semaphore
+ *
+ * PARAMETERS:  Semaphore           - OSD semaphore to wait on
+ *              Timeout             - Max time to wait
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Implements a semaphore wait with a check to see if the
+ *              semaphore is available immediately.  If it is not, the
+ *              interpreter is released.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_wait_semaphore (
+	acpi_handle                     semaphore,
+	u16                             timeout)
+{
+	acpi_status                     status;
+	acpi_status                     status2;
+
+
+	ACPI_FUNCTION_TRACE ("ex_system_wait_semaphore");
+
+
+	status = acpi_os_wait_semaphore (semaphore, 1, 0);
+	if (ACPI_SUCCESS (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	if (status == AE_TIME) {
+		/* We must wait, so unlock the interpreter */
+
+		acpi_ex_exit_interpreter ();
+
+		status = acpi_os_wait_semaphore (semaphore, 1, timeout);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "*** Thread awake after blocking, %s\n",
+			acpi_format_exception (status)));
+
+		/* Reacquire the interpreter */
+
+		status2 = acpi_ex_enter_interpreter ();
+		if (ACPI_FAILURE (status2)) {
+			/* Report fatal error, could not acquire interpreter */
+
+			return_ACPI_STATUS (status2);
+		}
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_do_stall
+ *
+ * PARAMETERS:  how_long            - The amount of time to stall,
+ *                                    in microseconds
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Suspend running thread for specified amount of time.
+ *              Note: ACPI specification requires that Stall() does not
+ *              relinquish the processor, and delays longer than 100 usec
+ *              should use Sleep() instead.  We allow stalls up to 255 usec
+ *              for compatibility with other interpreters and existing BIOSs.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_do_stall (
+	u32                             how_long)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	if (how_long > 255) /* 255 microseconds */ {
+		/*
+		 * Longer than 255 usec, this is an error
+		 *
+		 * (ACPI specifies 100 usec as max, but this gives some slack in
+		 * order to support existing BIOSs)
+		 */
+		ACPI_REPORT_ERROR (("Stall: Time parameter is too large (%d)\n", how_long));
+		status = AE_AML_OPERAND_VALUE;
+	}
+	else {
+		acpi_os_stall (how_long);
+	}
+
+	return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_do_suspend
+ *
+ * PARAMETERS:  how_long            - The amount of time to suspend,
+ *                                    in milliseconds
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Suspend running thread for specified amount of time.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_do_suspend (
+	acpi_integer                    how_long)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/* Since this thread will sleep, we must release the interpreter */
+
+	acpi_ex_exit_interpreter ();
+
+	acpi_os_sleep (how_long);
+
+	/* And now we must get the interpreter again */
+
+	status = acpi_ex_enter_interpreter ();
+	return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_acquire_mutex
+ *
+ * PARAMETERS:  *time_desc          - The 'time to delay' object descriptor
+ *              *obj_desc           - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Provides an access point to perform synchronization operations
+ *              within the AML.  This function will cause a lock to be generated
+ *              for the Mutex pointed to by obj_desc.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_acquire_mutex (
+	union acpi_operand_object       *time_desc,
+	union acpi_operand_object       *obj_desc)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_system_acquire_mutex", obj_desc);
+
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/*
+	 * Support for the _GL_ Mutex object -- go get the global lock
+	 */
+	if (obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore) {
+		status = acpi_ev_acquire_global_lock ((u16) time_desc->integer.value);
+		return_ACPI_STATUS (status);
+	}
+
+	status = acpi_ex_system_wait_semaphore (obj_desc->mutex.semaphore,
+			  (u16) time_desc->integer.value);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_release_mutex
+ *
+ * PARAMETERS:  *obj_desc           - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Provides an access point to perform synchronization operations
+ *              within the AML.  This operation is a request to release a
+ *              previously acquired Mutex.  If the Mutex variable is set then
+ *              it will be decremented.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_release_mutex (
+	union acpi_operand_object       *obj_desc)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_system_release_mutex");
+
+
+	if (!obj_desc) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/*
+	 * Support for the _GL_ Mutex object -- release the global lock
+	 */
+	if (obj_desc->mutex.semaphore == acpi_gbl_global_lock_semaphore) {
+		status = acpi_ev_release_global_lock ();
+		return_ACPI_STATUS (status);
+	}
+
+	status = acpi_os_signal_semaphore (obj_desc->mutex.semaphore, 1);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_signal_event
+ *
+ * PARAMETERS:  *obj_desc           - The object descriptor for this op
+ *
+ * RETURN:      AE_OK
+ *
+ * DESCRIPTION: Provides an access point to perform synchronization operations
+ *              within the AML.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_signal_event (
+	union acpi_operand_object       *obj_desc)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_system_signal_event");
+
+
+	if (obj_desc) {
+		status = acpi_os_signal_semaphore (obj_desc->event.semaphore, 1);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_wait_event
+ *
+ * PARAMETERS:  *time_desc          - The 'time to delay' object descriptor
+ *              *obj_desc           - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Provides an access point to perform synchronization operations
+ *              within the AML.  This operation is a request to wait for an
+ *              event.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_wait_event (
+	union acpi_operand_object       *time_desc,
+	union acpi_operand_object       *obj_desc)
+{
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_TRACE ("ex_system_wait_event");
+
+
+	if (obj_desc) {
+		status = acpi_ex_system_wait_semaphore (obj_desc->event.semaphore,
+				  (u16) time_desc->integer.value);
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_reset_event
+ *
+ * PARAMETERS:  *obj_desc           - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Reset an event to a known state.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_reset_event (
+	union acpi_operand_object       *obj_desc)
+{
+	acpi_status                     status = AE_OK;
+	void                            *temp_semaphore;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/*
+	 * We are going to simply delete the existing semaphore and
+	 * create a new one!
+	 */
+	status = acpi_os_create_semaphore (ACPI_NO_UNIT_LIMIT, 0, &temp_semaphore);
+	if (ACPI_SUCCESS (status)) {
+		(void) acpi_os_delete_semaphore (obj_desc->event.semaphore);
+		obj_desc->event.semaphore = temp_semaphore;
+	}
+
+	return (status);
+}
+
diff --git a/drivers/acpi/executer/exutils.c b/drivers/acpi/executer/exutils.c
new file mode 100644
index 0000000..40c6abb
--- /dev/null
+++ b/drivers/acpi/executer/exutils.c
@@ -0,0 +1,378 @@
+
+/******************************************************************************
+ *
+ * Module Name: exutils - interpreter/scanner utilities
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+/*
+ * DEFINE_AML_GLOBALS is tested in amlcode.h
+ * to determine whether certain global names should be "defined" or only
+ * "declared" in the current compilation.  This enhances maintainability
+ * by enabling a single header file to embody all knowledge of the names
+ * in question.
+ *
+ * Exactly one module of any executable should #define DEFINE_GLOBALS
+ * before #including the header files which use this convention.  The
+ * names in question will be defined and initialized in that module,
+ * and declared as extern in all other modules which #include those
+ * header files.
+ */
+
+#define DEFINE_AML_GLOBALS
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+#include <acpi/amlcode.h>
+#include <acpi/acevents.h>
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exutils")
+
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_enter_interpreter
+ *
+ * PARAMETERS:  None
+ *
+ * DESCRIPTION: Enter the interpreter execution region.  Failure to enter
+ *              the interpreter region is a fatal system error
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_enter_interpreter (void)
+{
+	acpi_status                     status;
+
+	ACPI_FUNCTION_TRACE ("ex_enter_interpreter");
+
+
+	status = acpi_ut_acquire_mutex (ACPI_MTX_EXECUTE);
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_ERROR (("Could not acquire interpreter mutex\n"));
+	}
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_exit_interpreter
+ *
+ * PARAMETERS:  None
+ *
+ * DESCRIPTION: Exit the interpreter execution region
+ *
+ * Cases where the interpreter is unlocked:
+ *      1) Completion of the execution of a control method
+ *      2) Method blocked on a Sleep() AML opcode
+ *      3) Method blocked on an Acquire() AML opcode
+ *      4) Method blocked on a Wait() AML opcode
+ *      5) Method blocked to acquire the global lock
+ *      6) Method blocked to execute a serialized control method that is
+ *          already executing
+ *      7) About to invoke a user-installed opregion handler
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_exit_interpreter (void)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ex_exit_interpreter");
+
+
+	status = acpi_ut_release_mutex (ACPI_MTX_EXECUTE);
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_ERROR (("Could not release interpreter mutex\n"));
+	}
+
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_truncate_for32bit_table
+ *
+ * PARAMETERS:  obj_desc        - Object to be truncated
+ *
+ * RETURN:      none
+ *
+ * DESCRIPTION: Truncate a number to 32-bits if the currently executing method
+ *              belongs to a 32-bit ACPI table.
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_truncate_for32bit_table (
+	union acpi_operand_object       *obj_desc)
+{
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/*
+	 * Object must be a valid number and we must be executing
+	 * a control method
+	 */
+	if ((!obj_desc) ||
+		(ACPI_GET_OBJECT_TYPE (obj_desc) != ACPI_TYPE_INTEGER)) {
+		return;
+	}
+
+	if (acpi_gbl_integer_byte_width == 4) {
+		/*
+		 * We are running a method that exists in a 32-bit ACPI table.
+		 * Truncate the value to 32 bits by zeroing out the upper 32-bit field
+		 */
+		obj_desc->integer.value &= (acpi_integer) ACPI_UINT32_MAX;
+	}
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_acquire_global_lock
+ *
+ * PARAMETERS:  field_flags           - Flags with Lock rule:
+ *                                      always_lock or never_lock
+ *
+ * RETURN:      TRUE/FALSE indicating whether the lock was actually acquired
+ *
+ * DESCRIPTION: Obtain the global lock and keep track of this fact via two
+ *              methods.  A global variable keeps the state of the lock, and
+ *              the state is returned to the caller.
+ *
+ ******************************************************************************/
+
+u8
+acpi_ex_acquire_global_lock (
+	u32                             field_flags)
+{
+	u8                              locked = FALSE;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ex_acquire_global_lock");
+
+
+	/* Only attempt lock if the always_lock bit is set */
+
+	if (field_flags & AML_FIELD_LOCK_RULE_MASK) {
+		/* We should attempt to get the lock, wait forever */
+
+		status = acpi_ev_acquire_global_lock (ACPI_WAIT_FOREVER);
+		if (ACPI_SUCCESS (status)) {
+			locked = TRUE;
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Could not acquire Global Lock, %s\n",
+				acpi_format_exception (status)));
+		}
+	}
+
+	return_VALUE (locked);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_release_global_lock
+ *
+ * PARAMETERS:  locked_by_me    - Return value from corresponding call to
+ *                                acquire_global_lock.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Release the global lock if it is locked.
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_release_global_lock (
+	u8                              locked_by_me)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ex_release_global_lock");
+
+
+	/* Only attempt unlock if the caller locked it */
+
+	if (locked_by_me) {
+		/* OK, now release the lock */
+
+		status = acpi_ev_release_global_lock ();
+		if (ACPI_FAILURE (status)) {
+			/* Report the error, but there isn't much else we can do */
+
+			ACPI_REPORT_ERROR (("Could not release ACPI Global Lock, %s\n",
+				acpi_format_exception (status)));
+		}
+	}
+
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_digits_needed
+ *
+ * PARAMETERS:  Value           - Value to be represented
+ *              Base            - Base of representation
+ *
+ * RETURN:      the number of digits needed to represent Value in Base
+ *
+ ******************************************************************************/
+
+u32
+acpi_ex_digits_needed (
+	acpi_integer                    value,
+	u32                             base)
+{
+	u32                             num_digits;
+	acpi_integer                    current_value;
+
+
+	ACPI_FUNCTION_TRACE ("ex_digits_needed");
+
+
+	/* acpi_integer is unsigned, so we don't worry about a '-' prefix */
+
+	if (value == 0) {
+		return_VALUE (1);
+	}
+
+	current_value = value;
+	num_digits = 0;
+
+	/* Count the digits in the requested base */
+
+	while (current_value) {
+		(void) acpi_ut_short_divide (current_value, base, &current_value, NULL);
+		num_digits++;
+	}
+
+	return_VALUE (num_digits);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_eisa_id_to_string
+ *
+ * PARAMETERS:  numeric_id      - EISA ID to be converted
+ *              out_string      - Where to put the converted string (8 bytes)
+ *
+ * DESCRIPTION: Convert a numeric EISA ID to string representation
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_eisa_id_to_string (
+	u32                             numeric_id,
+	char                            *out_string)
+{
+	u32                             eisa_id;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/* Swap ID to big-endian to get contiguous bits */
+
+	eisa_id = acpi_ut_dword_byte_swap (numeric_id);
+
+	out_string[0] = (char) ('@' + (((unsigned long) eisa_id >> 26) & 0x1f));
+	out_string[1] = (char) ('@' + ((eisa_id >> 21) & 0x1f));
+	out_string[2] = (char) ('@' + ((eisa_id >> 16) & 0x1f));
+	out_string[3] = acpi_ut_hex_to_ascii_char ((acpi_integer) eisa_id, 12);
+	out_string[4] = acpi_ut_hex_to_ascii_char ((acpi_integer) eisa_id, 8);
+	out_string[5] = acpi_ut_hex_to_ascii_char ((acpi_integer) eisa_id, 4);
+	out_string[6] = acpi_ut_hex_to_ascii_char ((acpi_integer) eisa_id, 0);
+	out_string[7] = 0;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_unsigned_integer_to_string
+ *
+ * PARAMETERS:  Value           - Value to be converted
+ *              out_string      - Where to put the converted string (8 bytes)
+ *
+ * RETURN:      Convert a number to string representation
+ *
+ ******************************************************************************/
+
+void
+acpi_ex_unsigned_integer_to_string (
+	acpi_integer                    value,
+	char                            *out_string)
+{
+	u32                             count;
+	u32                             digits_needed;
+	u32                             remainder;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	digits_needed = acpi_ex_digits_needed (value, 10);
+	out_string[digits_needed] = 0;
+
+	for (count = digits_needed; count > 0; count--) {
+		(void) acpi_ut_short_divide (value, 10, &value, &remainder);
+		out_string[count-1] = (char) ('0' + remainder);\
+	}
+}
+
+#endif