Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
new file mode 100644
index 0000000..df9ee9a
--- /dev/null
+++ b/drivers/ide/pci/atiixp.c
@@ -0,0 +1,370 @@
+/*
+ * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
+ *
+ * Copyright (C) 2003 ATI Inc. <hyu@ati.com>
+ * Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define ATIIXP_IDE_PIO_TIMING 0x40
+#define ATIIXP_IDE_MDMA_TIMING 0x44
+#define ATIIXP_IDE_PIO_CONTROL 0x48
+#define ATIIXP_IDE_PIO_MODE 0x4a
+#define ATIIXP_IDE_UDMA_CONTROL 0x54
+#define ATIIXP_IDE_UDMA_MODE 0x56
+
+typedef struct {
+ u8 command_width;
+ u8 recover_width;
+} atiixp_ide_timing;
+
+static atiixp_ide_timing pio_timing[] = {
+ { 0x05, 0x0d },
+ { 0x04, 0x07 },
+ { 0x03, 0x04 },
+ { 0x02, 0x02 },
+ { 0x02, 0x00 },
+};
+
+static atiixp_ide_timing mdma_timing[] = {
+ { 0x07, 0x07 },
+ { 0x02, 0x01 },
+ { 0x02, 0x00 },
+};
+
+static int save_mdma_mode[4];
+
+/**
+ * atiixp_ratemask - compute rate mask for ATIIXP IDE
+ * @drive: IDE drive to compute for
+ *
+ * Returns the available modes for the ATIIXP IDE controller.
+ */
+
+static u8 atiixp_ratemask(ide_drive_t *drive)
+{
+ u8 mode = 3;
+
+ if (!eighty_ninty_three(drive))
+ mode = min(mode, (u8)1);
+ return mode;
+}
+
+/**
+ * atiixp_dma_2_pio - return the PIO mode matching DMA
+ * @xfer_rate: transfer speed
+ *
+ * Returns the nearest equivalent PIO timing for the PIO or DMA
+ * mode requested by the controller.
+ */
+
+static u8 atiixp_dma_2_pio(u8 xfer_rate) {
+ switch(xfer_rate) {
+ case XFER_UDMA_6:
+ case XFER_UDMA_5:
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ case XFER_MW_DMA_2:
+ case XFER_PIO_4:
+ return 4;
+ case XFER_MW_DMA_1:
+ case XFER_PIO_3:
+ return 3;
+ case XFER_SW_DMA_2:
+ case XFER_PIO_2:
+ return 2;
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ case XFER_PIO_SLOW:
+ default:
+ return 0;
+ }
+}
+
+static int atiixp_ide_dma_host_on(ide_drive_t *drive)
+{
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ unsigned long flags;
+ u16 tmp16;
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+ if (save_mdma_mode[drive->dn])
+ tmp16 &= ~(1 << drive->dn);
+ else
+ tmp16 |= (1 << drive->dn);
+ pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+
+ return __ide_dma_host_on(drive);
+}
+
+static int atiixp_ide_dma_host_off(ide_drive_t *drive)
+{
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ unsigned long flags;
+ u16 tmp16;
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
+ tmp16 &= ~(1 << drive->dn);
+ pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+
+ return __ide_dma_host_off(drive);
+}
+
+/**
+ * atiixp_tune_drive - tune a drive attached to a ATIIXP
+ * @drive: drive to tune
+ * @pio: desired PIO mode
+ *
+ * Set the interface PIO mode.
+ */
+
+static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+{
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ unsigned long flags;
+ int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+ u32 pio_timing_data;
+ u16 pio_mode_data;
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
+ pio_mode_data &= ~(0x07 << (drive->dn * 4));
+ pio_mode_data |= (pio << (drive->dn * 4));
+ pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
+
+ pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+ pio_timing_data &= ~(0xff << timing_shift);
+ pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
+ (pio_timing[pio].command_width << (timing_shift + 4));
+ pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+/**
+ * atiixp_tune_chipset - tune a ATIIXP interface
+ * @drive: IDE drive to tune
+ * @xferspeed: speed to configure
+ *
+ * Set a ATIIXP interface channel to the desired speeds. This involves
+ * requires the right timing data into the ATIIXP configuration space
+ * then setting the drive parameters appropriately
+ */
+
+static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
+{
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ unsigned long flags;
+ int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+ u32 tmp32;
+ u16 tmp16;
+ u8 speed, pio;
+
+ speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed);
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ save_mdma_mode[drive->dn] = 0;
+ if (speed >= XFER_UDMA_0) {
+ pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
+ tmp16 &= ~(0x07 << (drive->dn * 4));
+ tmp16 |= ((speed & 0x07) << (drive->dn * 4));
+ pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
+ } else {
+ if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) {
+ save_mdma_mode[drive->dn] = speed;
+ pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
+ tmp32 &= ~(0xff << timing_shift);
+ tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) |
+ (mdma_timing[speed & 0x03].command_width << (timing_shift + 4));
+ pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
+ }
+ }
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+
+ if (speed >= XFER_SW_DMA_0)
+ pio = atiixp_dma_2_pio(speed);
+ else
+ pio = speed - XFER_PIO_0;
+
+ atiixp_tuneproc(drive, pio);
+
+ return ide_config_drive_speed(drive, speed);
+}
+
+/**
+ * atiixp_config_drive_for_dma - configure drive for DMA
+ * @drive: IDE drive to configure
+ *
+ * Set up a ATIIXP interface channel for the best available speed.
+ * We prefer UDMA if it is available and then MWDMA. If DMA is
+ * not available we switch to PIO and return 0.
+ */
+
+static int atiixp_config_drive_for_dma(ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive));
+
+ /* If no DMA speed was available then disable DMA and use PIO. */
+ if (!speed) {
+ u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
+ speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
+ }
+
+ (void) atiixp_speedproc(drive, speed);
+ return ide_dma_enable(drive);
+}
+
+/**
+ * atiixp_dma_check - set up an IDE device
+ * @drive: IDE drive to configure
+ *
+ * Set up the ATIIXP interface for the best available speed on this
+ * interface, preferring DMA to PIO.
+ */
+
+static int atiixp_dma_check(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+ u8 tspeed, speed;
+
+ drive->init_speed = 0;
+
+ if ((id->capability & 1) && drive->autodma) {
+
+ if (ide_use_dma(drive)) {
+ if (atiixp_config_drive_for_dma(drive))
+ return hwif->ide_dma_on(drive);
+ }
+
+ goto fast_ata_pio;
+
+ } else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+ tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
+ speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
+ hwif->speedproc(drive, speed);
+ return hwif->ide_dma_off_quietly(drive);
+ }
+ /* IORDY not supported */
+ return 0;
+}
+
+/**
+ * init_hwif_atiixp - fill in the hwif for the ATIIXP
+ * @hwif: IDE interface
+ *
+ * Set up the ide_hwif_t for the ATIIXP interface according to the
+ * capabilities of the hardware.
+ */
+
+static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
+{
+ if (!hwif->irq)
+ hwif->irq = hwif->channel ? 15 : 14;
+
+ hwif->autodma = 0;
+ hwif->tuneproc = &atiixp_tuneproc;
+ hwif->speedproc = &atiixp_speedproc;
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+
+ if (!hwif->dma_base)
+ return;
+
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x3f;
+ hwif->mwdma_mask = 0x06;
+ hwif->swdma_mask = 0x04;
+
+ /* FIXME: proper cable detection needed */
+ hwif->udma_four = 1;
+ hwif->ide_dma_host_on = &atiixp_ide_dma_host_on;
+ hwif->ide_dma_host_off = &atiixp_ide_dma_host_off;
+ hwif->ide_dma_check = &atiixp_dma_check;
+ if (!noautodma)
+ hwif->autodma = 1;
+
+ hwif->drives[1].autodma = hwif->autodma;
+ hwif->drives[0].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t atiixp_pci_info[] __devinitdata = {
+ { /* 0 */
+ .name = "ATIIXP",
+ .init_hwif = init_hwif_atiixp,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
+ .bootable = ON_BOARD,
+ }
+};
+
+/**
+ * atiixp_init_one - called when a ATIIXP is found
+ * @dev: the atiixp device
+ * @id: the matching pci id
+ *
+ * Called when the PCI registration layer (or the IDE initialization)
+ * finds a device matching our IDE device tables.
+ */
+
+static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]);
+}
+
+static struct pci_device_id atiixp_pci_tbl[] = {
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "ATIIXP_IDE",
+ .id_table = atiixp_pci_tbl,
+ .probe = atiixp_init_one,
+};
+
+static int atiixp_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(atiixp_ide_init);
+
+MODULE_AUTHOR("HUI YU");
+MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
+MODULE_LICENSE("GPL");