Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
new file mode 100644
index 0000000..9d70ba5
--- /dev/null
+++ b/drivers/ide/pci/sis5513.c
@@ -0,0 +1,984 @@
+/*
+ * linux/drivers/ide/pci/sis5513.c Version 0.16ac+vp Jun 18, 2003
+ *
+ * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
+ * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ *
+ * Thanks :
+ *
+ * SiS Taiwan : for direct support and hardware.
+ * Daniela Engert : for initial ATA100 advices and numerous others.
+ * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt :
+ * for checking code correctness, providing patches.
+ *
+ *
+ * Original tests and design on the SiS620 chipset.
+ * ATA100 tests and design on the SiS735 chipset.
+ * ATA16/33 support from specs
+ * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
+ * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz>
+ *
+ * Documentation:
+ * SiS chipset documentation available under NDA to companies only
+ * (not to individuals).
+ */
+
+/*
+ * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
+ * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
+ * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
+ *
+ * Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
+ * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
+ * can figure out that we have a more modern and more capable 5513 by looking
+ * for the respective NorthBridge IDs.
+ *
+ * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
+ * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
+ * ID, while the now ATA-133 capable 5513 still has the same PCI ID.
+ * Fortunately the 5513 can be 'unmasked' by fiddling with some config space
+ * bits, changing its device id to the true one - 5517 for 961 and 5518 for
+ * 962/963.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/irq.h>
+
+#include "ide-timing.h"
+
+#define DISPLAY_SIS_TIMINGS
+
+/* registers layout and init values are chipset family dependant */
+
+#define ATA_16 0x01
+#define ATA_33 0x02
+#define ATA_66 0x03
+#define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout
+#define ATA_100 0x05
+#define ATA_133a 0x06 // SiS961b with 133 support
+#define ATA_133 0x07 // SiS962/963
+
+static u8 chipset_family;
+
+/*
+ * Devices supported
+ */
+static const struct {
+ const char *name;
+ u16 host_id;
+ u8 chipset_family;
+ u8 flags;
+} SiSHostChipInfo[] = {
+ { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 },
+ { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 },
+ { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 },
+ { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 },
+ { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 },
+
+ { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a },
+ { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a },
+
+ { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 },
+ { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 },
+ { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 },
+ { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 },
+ { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 },
+
+ { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 },
+ { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 },
+ { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 },
+ { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 },
+ { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 },
+ { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 },
+
+ { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 },
+ { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 },
+ { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 },
+};
+
+/* Cycle time bits and values vary across chip dma capabilities
+ These three arrays hold the register layout and the values to set.
+ Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
+
+/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
+static u8 cycle_time_offset[] = {0,0,5,4,4,0,0};
+static u8 cycle_time_range[] = {0,0,2,3,3,4,4};
+static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
+ {0,0,0,0,0,0,0}, /* no udma */
+ {0,0,0,0,0,0,0}, /* no udma */
+ {3,2,1,0,0,0,0}, /* ATA_33 */
+ {7,5,3,2,1,0,0}, /* ATA_66 */
+ {7,5,3,2,1,0,0}, /* ATA_100a (730 specific), differences are on cycle_time range and offset */
+ {11,7,5,4,2,1,0}, /* ATA_100 */
+ {15,10,7,5,3,2,1}, /* ATA_133a (earliest 691 southbridges) */
+ {15,10,7,5,3,2,1}, /* ATA_133 */
+};
+/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
+ See SiS962 data sheet for more detail */
+static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
+ {0,0,0,0,0,0,0}, /* no udma */
+ {0,0,0,0,0,0,0}, /* no udma */
+ {2,1,1,0,0,0,0},
+ {4,3,2,1,0,0,0},
+ {4,3,2,1,0,0,0},
+ {6,4,3,1,1,1,0},
+ {9,6,4,2,2,2,2},
+ {9,6,4,2,2,2,2},
+};
+/* Initialize time, Active time, Recovery time vary across
+ IDE clock settings. These 3 arrays hold the register value
+ for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
+static u8 ini_time_value[][8] = {
+ {0,0,0,0,0,0,0,0},
+ {0,0,0,0,0,0,0,0},
+ {2,1,0,0,0,1,0,0},
+ {4,3,1,1,1,3,1,1},
+ {4,3,1,1,1,3,1,1},
+ {6,4,2,2,2,4,2,2},
+ {9,6,3,3,3,6,3,3},
+ {9,6,3,3,3,6,3,3},
+};
+static u8 act_time_value[][8] = {
+ {0,0,0,0,0,0,0,0},
+ {0,0,0,0,0,0,0,0},
+ {9,9,9,2,2,7,2,2},
+ {19,19,19,5,4,14,5,4},
+ {19,19,19,5,4,14,5,4},
+ {28,28,28,7,6,21,7,6},
+ {38,38,38,10,9,28,10,9},
+ {38,38,38,10,9,28,10,9},
+};
+static u8 rco_time_value[][8] = {
+ {0,0,0,0,0,0,0,0},
+ {0,0,0,0,0,0,0,0},
+ {9,2,0,2,0,7,1,1},
+ {19,5,1,5,2,16,3,2},
+ {19,5,1,5,2,16,3,2},
+ {30,9,3,9,4,25,6,4},
+ {40,12,4,12,5,34,12,5},
+ {40,12,4,12,5,34,12,5},
+};
+
+/*
+ * Printing configuration
+ */
+/* Used for chipset type printing at boot time */
+static char* chipset_capability[] = {
+ "ATA", "ATA 16",
+ "ATA 33", "ATA 66",
+ "ATA 100 (1st gen)", "ATA 100 (2nd gen)",
+ "ATA 133 (1st gen)", "ATA 133 (2nd gen)"
+};
+
+#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+
+static u8 sis_proc = 0;
+
+static struct pci_dev *bmide_dev;
+
+static char* cable_type[] = {
+ "80 pins",
+ "40 pins"
+};
+
+static char* recovery_time[] ={
+ "12 PCICLK", "1 PCICLK",
+ "2 PCICLK", "3 PCICLK",
+ "4 PCICLK", "5 PCICLCK",
+ "6 PCICLK", "7 PCICLCK",
+ "8 PCICLK", "9 PCICLCK",
+ "10 PCICLK", "11 PCICLK",
+ "13 PCICLK", "14 PCICLK",
+ "15 PCICLK", "15 PCICLK"
+};
+
+static char* active_time[] = {
+ "8 PCICLK", "1 PCICLCK",
+ "2 PCICLK", "3 PCICLK",
+ "4 PCICLK", "5 PCICLK",
+ "6 PCICLK", "12 PCICLK"
+};
+
+static char* cycle_time[] = {
+ "Reserved", "2 CLK",
+ "3 CLK", "4 CLK",
+ "5 CLK", "6 CLK",
+ "7 CLK", "8 CLK",
+ "9 CLK", "10 CLK",
+ "11 CLK", "12 CLK",
+ "13 CLK", "14 CLK",
+ "15 CLK", "16 CLK"
+};
+
+/* Generic add master or slave info function */
+static char* get_drives_info (char *buffer, u8 pos)
+{
+ u8 reg00, reg01, reg10, reg11; /* timing registers */
+ u32 regdw0, regdw1;
+ char* p = buffer;
+
+/* Postwrite/Prefetch */
+ if (chipset_family < ATA_133) {
+ pci_read_config_byte(bmide_dev, 0x4b, ®00);
+ p += sprintf(p, "Drive %d: Postwrite %s \t \t Postwrite %s\n",
+ pos, (reg00 & (0x10 << pos)) ? "Enabled" : "Disabled",
+ (reg00 & (0x40 << pos)) ? "Enabled" : "Disabled");
+ p += sprintf(p, " Prefetch %s \t \t Prefetch %s\n",
+ (reg00 & (0x01 << pos)) ? "Enabled" : "Disabled",
+ (reg00 & (0x04 << pos)) ? "Enabled" : "Disabled");
+ pci_read_config_byte(bmide_dev, 0x40+2*pos, ®00);
+ pci_read_config_byte(bmide_dev, 0x41+2*pos, ®01);
+ pci_read_config_byte(bmide_dev, 0x44+2*pos, ®10);
+ pci_read_config_byte(bmide_dev, 0x45+2*pos, ®11);
+ } else {
+ u32 reg54h;
+ u8 drive_pci = 0x40;
+ pci_read_config_dword(bmide_dev, 0x54, ®54h);
+ if (reg54h & 0x40000000) {
+ // Configuration space remapped to 0x70
+ drive_pci = 0x70;
+ }
+ pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos, ®dw0);
+ pci_read_config_dword(bmide_dev, (unsigned long)drive_pci+4*pos+8, ®dw1);
+
+ p += sprintf(p, "Drive %d:\n", pos);
+ }
+
+
+/* UDMA */
+ if (chipset_family >= ATA_133) {
+ p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
+ (regdw0 & 0x04) ? "Enabled" : "Disabled",
+ (regdw1 & 0x04) ? "Enabled" : "Disabled");
+ p += sprintf(p, " UDMA Cycle Time %s \t UDMA Cycle Time %s\n",
+ cycle_time[(regdw0 & 0xF0) >> 4],
+ cycle_time[(regdw1 & 0xF0) >> 4]);
+ } else if (chipset_family >= ATA_33) {
+ p += sprintf(p, " UDMA %s \t \t \t UDMA %s\n",
+ (reg01 & 0x80) ? "Enabled" : "Disabled",
+ (reg11 & 0x80) ? "Enabled" : "Disabled");
+
+ p += sprintf(p, " UDMA Cycle Time ");
+ switch(chipset_family) {
+ case ATA_33: p += sprintf(p, cycle_time[(reg01 & 0x60) >> 5]); break;
+ case ATA_66:
+ case ATA_100a: p += sprintf(p, cycle_time[(reg01 & 0x70) >> 4]); break;
+ case ATA_100:
+ case ATA_133a: p += sprintf(p, cycle_time[reg01 & 0x0F]); break;
+ default: p += sprintf(p, "?"); break;
+ }
+ p += sprintf(p, " \t UDMA Cycle Time ");
+ switch(chipset_family) {
+ case ATA_33: p += sprintf(p, cycle_time[(reg11 & 0x60) >> 5]); break;
+ case ATA_66:
+ case ATA_100a: p += sprintf(p, cycle_time[(reg11 & 0x70) >> 4]); break;
+ case ATA_100:
+ case ATA_133a: p += sprintf(p, cycle_time[reg11 & 0x0F]); break;
+ default: p += sprintf(p, "?"); break;
+ }
+ p += sprintf(p, "\n");
+ }
+
+
+ if (chipset_family < ATA_133) { /* else case TODO */
+
+/* Data Active */
+ p += sprintf(p, " Data Active Time ");
+ switch(chipset_family) {
+ case ATA_16: /* confirmed */
+ case ATA_33:
+ case ATA_66:
+ case ATA_100a: p += sprintf(p, active_time[reg01 & 0x07]); break;
+ case ATA_100:
+ case ATA_133a: p += sprintf(p, active_time[(reg00 & 0x70) >> 4]); break;
+ default: p += sprintf(p, "?"); break;
+ }
+ p += sprintf(p, " \t Data Active Time ");
+ switch(chipset_family) {
+ case ATA_16:
+ case ATA_33:
+ case ATA_66:
+ case ATA_100a: p += sprintf(p, active_time[reg11 & 0x07]); break;
+ case ATA_100:
+ case ATA_133a: p += sprintf(p, active_time[(reg10 & 0x70) >> 4]); break;
+ default: p += sprintf(p, "?"); break;
+ }
+ p += sprintf(p, "\n");
+
+/* Data Recovery */
+ /* warning: may need (reg&0x07) for pre ATA66 chips */
+ p += sprintf(p, " Data Recovery Time %s \t Data Recovery Time %s\n",
+ recovery_time[reg00 & 0x0f], recovery_time[reg10 & 0x0f]);
+ }
+
+ return p;
+}
+
+static char* get_masters_info(char* buffer)
+{
+ return get_drives_info(buffer, 0);
+}
+
+static char* get_slaves_info(char* buffer)
+{
+ return get_drives_info(buffer, 1);
+}
+
+/* Main get_info, called on /proc/ide/sis reads */
+static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
+{
+ char *p = buffer;
+ int len;
+ u8 reg;
+ u16 reg2, reg3;
+
+ p += sprintf(p, "\nSiS 5513 ");
+ switch(chipset_family) {
+ case ATA_16: p += sprintf(p, "DMA 16"); break;
+ case ATA_33: p += sprintf(p, "Ultra 33"); break;
+ case ATA_66: p += sprintf(p, "Ultra 66"); break;
+ case ATA_100a:
+ case ATA_100: p += sprintf(p, "Ultra 100"); break;
+ case ATA_133a:
+ case ATA_133: p += sprintf(p, "Ultra 133"); break;
+ default: p+= sprintf(p, "Unknown???"); break;
+ }
+ p += sprintf(p, " chipset\n");
+ p += sprintf(p, "--------------- Primary Channel "
+ "---------------- Secondary Channel "
+ "-------------\n");
+
+/* Status */
+ pci_read_config_byte(bmide_dev, 0x4a, ®);
+ if (chipset_family == ATA_133) {
+ pci_read_config_word(bmide_dev, 0x50, ®2);
+ pci_read_config_word(bmide_dev, 0x52, ®3);
+ }
+ p += sprintf(p, "Channel Status: ");
+ if (chipset_family < ATA_66) {
+ p += sprintf(p, "%s \t \t \t \t %s\n",
+ (reg & 0x04) ? "On" : "Off",
+ (reg & 0x02) ? "On" : "Off");
+ } else if (chipset_family < ATA_133) {
+ p += sprintf(p, "%s \t \t \t \t %s \n",
+ (reg & 0x02) ? "On" : "Off",
+ (reg & 0x04) ? "On" : "Off");
+ } else { /* ATA_133 */
+ p += sprintf(p, "%s \t \t \t \t %s \n",
+ (reg2 & 0x02) ? "On" : "Off",
+ (reg3 & 0x02) ? "On" : "Off");
+ }
+
+/* Operation Mode */
+ pci_read_config_byte(bmide_dev, 0x09, ®);
+ p += sprintf(p, "Operation Mode: %s \t \t \t %s \n",
+ (reg & 0x01) ? "Native" : "Compatible",
+ (reg & 0x04) ? "Native" : "Compatible");
+
+/* 80-pin cable ? */
+ if (chipset_family >= ATA_133) {
+ p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
+ (reg2 & 0x01) ? cable_type[1] : cable_type[0],
+ (reg3 & 0x01) ? cable_type[1] : cable_type[0]);
+ } else if (chipset_family > ATA_33) {
+ pci_read_config_byte(bmide_dev, 0x48, ®);
+ p += sprintf(p, "Cable Type: %s \t \t \t %s\n",
+ (reg & 0x10) ? cable_type[1] : cable_type[0],
+ (reg & 0x20) ? cable_type[1] : cable_type[0]);
+ }
+
+/* Prefetch Count */
+ if (chipset_family < ATA_133) {
+ pci_read_config_word(bmide_dev, 0x4c, ®2);
+ pci_read_config_word(bmide_dev, 0x4e, ®3);
+ p += sprintf(p, "Prefetch Count: %d \t \t \t \t %d\n",
+ reg2, reg3);
+ }
+
+ p = get_masters_info(p);
+ p = get_slaves_info(p);
+
+ len = (p - buffer) - offset;
+ *addr = buffer + offset;
+
+ return len > count ? count : len;
+}
+#endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */
+
+static u8 sis5513_ratemask (ide_drive_t *drive)
+{
+ u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 };
+ u8 mode = rates[chipset_family];
+
+ if (!eighty_ninty_three(drive))
+ mode = min(mode, (u8)1);
+ return mode;
+}
+
+/*
+ * Configuration functions
+ */
+/* Enables per-drive prefetch and postwrite */
+static void config_drive_art_rwp (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+
+ u8 reg4bh = 0;
+ u8 rw_prefetch = (0x11 << drive->dn);
+
+ if (drive->media != ide_disk)
+ return;
+ pci_read_config_byte(dev, 0x4b, ®4bh);
+
+ if ((reg4bh & rw_prefetch) != rw_prefetch)
+ pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
+}
+
+
+/* Set per-drive active and recovery time */
+static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+
+ u8 timing, drive_pci, test1, test2;
+
+ u16 eide_pio_timing[6] = {600, 390, 240, 180, 120, 90};
+ u16 xfer_pio = drive->id->eide_pio_modes;
+
+ config_drive_art_rwp(drive);
+ pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
+
+ if (xfer_pio> 4)
+ xfer_pio = 0;
+
+ if (drive->id->eide_pio_iordy > 0) {
+ for (xfer_pio = 5;
+ (xfer_pio > 0) &&
+ (drive->id->eide_pio_iordy > eide_pio_timing[xfer_pio]);
+ xfer_pio--);
+ } else {
+ xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
+ (drive->id->eide_pio_modes & 2) ? 0x04 :
+ (drive->id->eide_pio_modes & 1) ? 0x03 : xfer_pio;
+ }
+
+ timing = (xfer_pio >= pio) ? xfer_pio : pio;
+
+ /* In pre ATA_133 case, drives sit at 0x40 + 4*drive->dn */
+ drive_pci = 0x40;
+ /* In SiS962 case drives sit at (0x40 or 0x70) + 8*drive->dn) */
+ if (chipset_family >= ATA_133) {
+ u32 reg54h;
+ pci_read_config_dword(dev, 0x54, ®54h);
+ if (reg54h & 0x40000000) drive_pci = 0x70;
+ drive_pci += ((drive->dn)*0x4);
+ } else {
+ drive_pci += ((drive->dn)*0x2);
+ }
+
+ /* register layout changed with newer ATA100 chips */
+ if (chipset_family < ATA_100) {
+ pci_read_config_byte(dev, drive_pci, &test1);
+ pci_read_config_byte(dev, drive_pci+1, &test2);
+
+ /* Clear active and recovery timings */
+ test1 &= ~0x0F;
+ test2 &= ~0x07;
+
+ switch(timing) {
+ case 4: test1 |= 0x01; test2 |= 0x03; break;
+ case 3: test1 |= 0x03; test2 |= 0x03; break;
+ case 2: test1 |= 0x04; test2 |= 0x04; break;
+ case 1: test1 |= 0x07; test2 |= 0x06; break;
+ default: break;
+ }
+ pci_write_config_byte(dev, drive_pci, test1);
+ pci_write_config_byte(dev, drive_pci+1, test2);
+ } else if (chipset_family < ATA_133) {
+ switch(timing) { /* active recovery
+ v v */
+ case 4: test1 = 0x30|0x01; break;
+ case 3: test1 = 0x30|0x03; break;
+ case 2: test1 = 0x40|0x04; break;
+ case 1: test1 = 0x60|0x07; break;
+ default: break;
+ }
+ pci_write_config_byte(dev, drive_pci, test1);
+ } else { /* ATA_133 */
+ u32 test3;
+ pci_read_config_dword(dev, drive_pci, &test3);
+ test3 &= 0xc0c00fff;
+ if (test3 & 0x08) {
+ test3 |= (unsigned long)ini_time_value[ATA_133][timing] << 12;
+ test3 |= (unsigned long)act_time_value[ATA_133][timing] << 16;
+ test3 |= (unsigned long)rco_time_value[ATA_133][timing] << 24;
+ } else {
+ test3 |= (unsigned long)ini_time_value[ATA_100][timing] << 12;
+ test3 |= (unsigned long)act_time_value[ATA_100][timing] << 16;
+ test3 |= (unsigned long)rco_time_value[ATA_100][timing] << 24;
+ }
+ pci_write_config_dword(dev, drive_pci, test3);
+ }
+}
+
+static int config_chipset_for_pio (ide_drive_t *drive, u8 pio)
+{
+ if (pio == 255)
+ pio = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
+ config_art_rwp_pio(drive, pio);
+ return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4));
+}
+
+static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+
+ u8 drive_pci, reg, speed;
+ u32 regdw;
+
+ speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed);
+
+ /* See config_art_rwp_pio for drive pci config registers */
+ drive_pci = 0x40;
+ if (chipset_family >= ATA_133) {
+ u32 reg54h;
+ pci_read_config_dword(dev, 0x54, ®54h);
+ if (reg54h & 0x40000000) drive_pci = 0x70;
+ drive_pci += ((drive->dn)*0x4);
+ pci_read_config_dword(dev, (unsigned long)drive_pci, ®dw);
+ /* Disable UDMA bit for non UDMA modes on UDMA chips */
+ if (speed < XFER_UDMA_0) {
+ regdw &= 0xfffffffb;
+ pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
+ }
+
+ } else {
+ drive_pci += ((drive->dn)*0x2);
+ pci_read_config_byte(dev, drive_pci+1, ®);
+ /* Disable UDMA bit for non UDMA modes on UDMA chips */
+ if ((speed < XFER_UDMA_0) && (chipset_family > ATA_16)) {
+ reg &= 0x7F;
+ pci_write_config_byte(dev, drive_pci+1, reg);
+ }
+ }
+
+ /* Config chip for mode */
+ switch(speed) {
+ case XFER_UDMA_6:
+ case XFER_UDMA_5:
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ if (chipset_family >= ATA_133) {
+ regdw |= 0x04;
+ regdw &= 0xfffff00f;
+ /* check if ATA133 enable */
+ if (regdw & 0x08) {
+ regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
+ regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
+ } else {
+ /* if ATA133 disable, we should not set speed above UDMA5 */
+ if (speed > XFER_UDMA_5)
+ speed = XFER_UDMA_5;
+ regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
+ regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
+ }
+ pci_write_config_dword(dev, (unsigned long)drive_pci, regdw);
+ } else {
+ /* Force the UDMA bit on if we want to use UDMA */
+ reg |= 0x80;
+ /* clean reg cycle time bits */
+ reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family]))
+ << cycle_time_offset[chipset_family]);
+ /* set reg cycle time bits */
+ reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0]
+ << cycle_time_offset[chipset_family];
+ pci_write_config_byte(dev, drive_pci+1, reg);
+ }
+ break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_2:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0:
+ break;
+ case XFER_PIO_4: return((int) config_chipset_for_pio(drive, 4));
+ case XFER_PIO_3: return((int) config_chipset_for_pio(drive, 3));
+ case XFER_PIO_2: return((int) config_chipset_for_pio(drive, 2));
+ case XFER_PIO_1: return((int) config_chipset_for_pio(drive, 1));
+ case XFER_PIO_0:
+ default: return((int) config_chipset_for_pio(drive, 0));
+ }
+
+ return ((int) ide_config_drive_speed(drive, speed));
+}
+
+static void sis5513_tune_drive (ide_drive_t *drive, u8 pio)
+{
+ (void) config_chipset_for_pio(drive, pio);
+}
+
+/*
+ * ((id->hw_config & 0x4000|0x2000) && (HWIF(drive)->udma_four))
+ */
+static int config_chipset_for_dma (ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, sis5513_ratemask(drive));
+
+#ifdef DEBUG
+ printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n",
+ drive->dn, drive->id->dma_ultra);
+#endif
+
+ if (!(speed))
+ return 0;
+
+ sis5513_tune_chipset(drive, speed);
+ return ide_dma_enable(drive);
+}
+
+static int sis5513_config_drive_xfer_rate (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+
+ drive->init_speed = 0;
+
+ if (id && (id->capability & 1) && drive->autodma) {
+
+ if (ide_use_dma(drive)) {
+ if (config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
+ }
+
+ goto fast_ata_pio;
+
+ } else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+ sis5513_tune_drive(drive, 5);
+ return hwif->ide_dma_off_quietly(drive);
+ }
+ /* IORDY not supported */
+ return 0;
+}
+
+/* initiates/aborts (U)DMA read/write operations on a drive. */
+static int sis5513_config_xfer_rate (ide_drive_t *drive)
+{
+ config_drive_art_rwp(drive);
+ config_art_rwp_pio(drive, 5);
+ return sis5513_config_drive_xfer_rate(drive);
+}
+
+/*
+ Future simpler config_xfer_rate :
+ When ide_find_best_mode is made bad-drive aware
+ - remove config_drive_xfer_rate and config_chipset_for_dma,
+ - replace config_xfer_rate with the following
+
+static int sis5513_config_xfer_rate (ide_drive_t *drive)
+{
+ u16 w80 = HWIF(drive)->udma_four;
+ u16 speed;
+
+ config_drive_art_rwp(drive);
+ config_art_rwp_pio(drive, 5);
+
+ speed = ide_find_best_mode(drive,
+ XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
+ (chipset_family >= ATA_33 ? XFER_UDMA : 0) |
+ (w80 && chipset_family >= ATA_66 ? XFER_UDMA_66 : 0) |
+ (w80 && chipset_family >= ATA_100a ? XFER_UDMA_100 : 0) |
+ (w80 && chipset_family >= ATA_133a ? XFER_UDMA_133 : 0));
+
+ sis5513_tune_chipset(drive, speed);
+
+ if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ return HWIF(drive)->ide_dma_on(drive);
+ return HWIF(drive)->ide_dma_off_quietly(drive);
+}
+*/
+
+/* Chip detection and general config */
+static unsigned int __init init_chipset_sis5513 (struct pci_dev *dev, const char *name)
+{
+ struct pci_dev *host;
+ int i = 0;
+
+ chipset_family = 0;
+
+ for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
+
+ host = pci_find_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
+
+ if (!host)
+ continue;
+
+ chipset_family = SiSHostChipInfo[i].chipset_family;
+
+ /* Special case for SiS630 : 630S/ET is ATA_100a */
+ if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
+ u8 hostrev;
+ pci_read_config_byte(host, PCI_REVISION_ID, &hostrev);
+ if (hostrev >= 0x30)
+ chipset_family = ATA_100a;
+ }
+
+ printk(KERN_INFO "SIS5513: %s %s controller\n",
+ SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
+ }
+
+ if (!chipset_family) { /* Belongs to pci-quirks */
+
+ u32 idemisc;
+ u16 trueid;
+
+ /* Disable ID masking and register remapping */
+ pci_read_config_dword(dev, 0x54, &idemisc);
+ pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
+ pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
+ pci_write_config_dword(dev, 0x54, idemisc);
+
+ if (trueid == 0x5518) {
+ printk(KERN_INFO "SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller\n");
+ chipset_family = ATA_133;
+
+ /* Check for 5513 compability mapping
+ * We must use this, else the port enabled code will fail,
+ * as it expects the enablebits at 0x4a.
+ */
+ if ((idemisc & 0x40000000) == 0) {
+ pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
+ printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+ }
+ }
+ }
+
+ if (!chipset_family) { /* Belongs to pci-quirks */
+
+ struct pci_dev *lpc_bridge;
+ u16 trueid;
+ u8 prefctl;
+ u8 idecfg;
+ u8 sbrev;
+
+ pci_read_config_byte(dev, 0x4a, &idecfg);
+ pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
+ pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
+ pci_write_config_byte(dev, 0x4a, idecfg);
+
+ if (trueid == 0x5517) { /* SiS 961/961B */
+
+ lpc_bridge = pci_find_slot(0x00, 0x10); /* Bus 0, Dev 2, Fn 0 */
+ pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
+ pci_read_config_byte(dev, 0x49, &prefctl);
+
+ if (sbrev == 0x10 && (prefctl & 0x80)) {
+ printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
+ chipset_family = ATA_133a;
+ } else {
+ printk(KERN_INFO "SIS5513: SiS 961 MuTIOL IDE UDMA100 controller\n");
+ chipset_family = ATA_100;
+ }
+ }
+ }
+
+ if (!chipset_family)
+ return -1;
+
+ /* Make general config ops here
+ 1/ tell IDE channels to operate in Compatibility mode only
+ 2/ tell old chips to allow per drive IDE timings */
+
+ {
+ u8 reg;
+ u16 regw;
+
+ switch(chipset_family) {
+ case ATA_133:
+ /* SiS962 operation mode */
+ pci_read_config_word(dev, 0x50, ®w);
+ if (regw & 0x08)
+ pci_write_config_word(dev, 0x50, regw&0xfff7);
+ pci_read_config_word(dev, 0x52, ®w);
+ if (regw & 0x08)
+ pci_write_config_word(dev, 0x52, regw&0xfff7);
+ break;
+ case ATA_133a:
+ case ATA_100:
+ /* Fixup latency */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
+ /* Set compatibility bit */
+ pci_read_config_byte(dev, 0x49, ®);
+ if (!(reg & 0x01)) {
+ pci_write_config_byte(dev, 0x49, reg|0x01);
+ }
+ break;
+ case ATA_100a:
+ case ATA_66:
+ /* Fixup latency */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
+
+ /* On ATA_66 chips the bit was elsewhere */
+ pci_read_config_byte(dev, 0x52, ®);
+ if (!(reg & 0x04)) {
+ pci_write_config_byte(dev, 0x52, reg|0x04);
+ }
+ break;
+ case ATA_33:
+ /* On ATA_33 we didn't have a single bit to set */
+ pci_read_config_byte(dev, 0x09, ®);
+ if ((reg & 0x0f) != 0x00) {
+ pci_write_config_byte(dev, 0x09, reg&0xf0);
+ }
+ case ATA_16:
+ /* force per drive recovery and active timings
+ needed on ATA_33 and below chips */
+ pci_read_config_byte(dev, 0x52, ®);
+ if (!(reg & 0x08)) {
+ pci_write_config_byte(dev, 0x52, reg|0x08);
+ }
+ break;
+ }
+
+#if defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS)
+ if (!sis_proc) {
+ sis_proc = 1;
+ bmide_dev = dev;
+ ide_pci_create_host_proc("sis", sis_get_info);
+ }
+#endif
+ }
+
+ return 0;
+}
+
+static unsigned int __init ata66_sis5513 (ide_hwif_t *hwif)
+{
+ u8 ata66 = 0;
+
+ if (chipset_family >= ATA_133) {
+ u16 regw = 0;
+ u16 reg_addr = hwif->channel ? 0x52: 0x50;
+ pci_read_config_word(hwif->pci_dev, reg_addr, ®w);
+ ata66 = (regw & 0x8000) ? 0 : 1;
+ } else if (chipset_family >= ATA_66) {
+ u8 reg48h = 0;
+ u8 mask = hwif->channel ? 0x20 : 0x10;
+ pci_read_config_byte(hwif->pci_dev, 0x48, ®48h);
+ ata66 = (reg48h & mask) ? 0 : 1;
+ }
+ return ata66;
+}
+
+static void __init init_hwif_sis5513 (ide_hwif_t *hwif)
+{
+ hwif->autodma = 0;
+
+ if (!hwif->irq)
+ hwif->irq = hwif->channel ? 15 : 14;
+
+ hwif->tuneproc = &sis5513_tune_drive;
+ hwif->speedproc = &sis5513_tune_chipset;
+
+ if (!(hwif->dma_base)) {
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+ return;
+ }
+
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x7f;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x07;
+
+ if (!chipset_family)
+ return;
+
+ if (!(hwif->udma_four))
+ hwif->udma_four = ata66_sis5513(hwif);
+
+ if (chipset_family > ATA_16) {
+ hwif->ide_dma_check = &sis5513_config_xfer_rate;
+ if (!noautodma)
+ hwif->autodma = 1;
+ }
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+ return;
+}
+
+static ide_pci_device_t sis5513_chipset __devinitdata = {
+ .name = "SIS5513",
+ .init_chipset = init_chipset_sis5513,
+ .init_hwif = init_hwif_sis5513,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .bootable = ON_BOARD,
+};
+
+static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return ide_setup_pci_device(dev, &sis5513_chipset);
+}
+
+static struct pci_device_id sis5513_pci_tbl[] = {
+ { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "SIS_IDE",
+ .id_table = sis5513_pci_tbl,
+ .probe = sis5513_init_one,
+};
+
+static int sis5513_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(sis5513_ide_init);
+
+MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
+MODULE_DESCRIPTION("PCI driver module for SIS IDE");
+MODULE_LICENSE("GPL");
+
+/*
+ * TODO:
+ * - CLEANUP
+ * - Use drivers/ide/ide-timing.h !
+ * - More checks in the config registers (force values instead of
+ * relying on the BIOS setting them correctly).
+ * - Further optimisations ?
+ * . for example ATA66+ regs 0x48 & 0x4A
+ */