Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/isdn/hardware/eicon/capimain.c b/drivers/isdn/hardware/eicon/capimain.c
new file mode 100644
index 0000000..8fe4f3f
--- /dev/null
+++ b/drivers/isdn/hardware/eicon/capimain.c
@@ -0,0 +1,147 @@
+/* $Id: capimain.c,v 1.24 2003/09/09 06:51:05 schindler Exp $
+ *
+ * ISDN interface module for Eicon active cards DIVA.
+ * CAPI Interface
+ *
+ * Copyright 2000-2003 by Armin Schindler (mac@melware.de)
+ * Copyright 2000-2003 Cytronics & Melware (info@melware.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/smp_lock.h>
+#include <linux/skbuff.h>
+
+#include "os_capi.h"
+
+#include "platform.h"
+#include "di_defs.h"
+#include "capi20.h"
+#include "divacapi.h"
+#include "cp_vers.h"
+#include "capifunc.h"
+
+static char *main_revision = "$Revision: 1.24 $";
+static char *DRIVERNAME =
+ "Eicon DIVA - CAPI Interface driver (http://www.melware.net)";
+static char *DRIVERLNAME = "divacapi";
+
+MODULE_DESCRIPTION("CAPI driver for Eicon DIVA cards");
+MODULE_AUTHOR("Cytronics & Melware, Eicon Networks");
+MODULE_SUPPORTED_DEVICE("CAPI and DIVA card drivers");
+MODULE_LICENSE("GPL");
+
+/*
+ * get revision number from revision string
+ */
+static char *getrev(const char *revision)
+{
+ char *rev;
+ char *p;
+ if ((p = strchr(revision, ':'))) {
+ rev = p + 2;
+ p = strchr(rev, '$');
+ *--p = 0;
+ } else
+ rev = "1.0";
+ return rev;
+
+}
+
+/*
+ * alloc a message buffer
+ */
+diva_os_message_buffer_s *diva_os_alloc_message_buffer(unsigned long size,
+ void **data_buf)
+{
+ diva_os_message_buffer_s *dmb = alloc_skb(size, GFP_ATOMIC);
+ if (dmb) {
+ *data_buf = skb_put(dmb, size);
+ }
+ return (dmb);
+}
+
+/*
+ * free a message buffer
+ */
+void diva_os_free_message_buffer(diva_os_message_buffer_s * dmb)
+{
+ kfree_skb(dmb);
+}
+
+/*
+ * proc function for controller info
+ */
+static int diva_ctl_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, struct capi_ctr *ctrl)
+{
+ diva_card *card = (diva_card *) ctrl->driverdata;
+ int len = 0;
+
+ len += sprintf(page + len, "%s\n", ctrl->name);
+ len += sprintf(page + len, "Serial No. : %s\n", ctrl->serial);
+ len += sprintf(page + len, "Id : %d\n", card->Id);
+ len += sprintf(page + len, "Channels : %d\n", card->d.channels);
+
+ if (off + count >= len)
+ *eof = 1;
+ if (len < off)
+ return 0;
+ *start = page + off;
+ return ((count < len - off) ? count : len - off);
+}
+
+/*
+ * set additional os settings in capi_ctr struct
+ */
+void diva_os_set_controller_struct(struct capi_ctr *ctrl)
+{
+ ctrl->driver_name = DRIVERLNAME;
+ ctrl->load_firmware = NULL;
+ ctrl->reset_ctr = NULL;
+ ctrl->ctr_read_proc = diva_ctl_read_proc;
+ ctrl->owner = THIS_MODULE;
+}
+
+/*
+ * module init
+ */
+static int DIVA_INIT_FUNCTION divacapi_init(void)
+{
+ char tmprev[32];
+ int ret = 0;
+
+ sprintf(DRIVERRELEASE_CAPI, "%d.%d%s", DRRELMAJOR, DRRELMINOR,
+ DRRELEXTRA);
+
+ printk(KERN_INFO "%s\n", DRIVERNAME);
+ printk(KERN_INFO "%s: Rel:%s Rev:", DRIVERLNAME, DRIVERRELEASE_CAPI);
+ strcpy(tmprev, main_revision);
+ printk("%s Build: %s(%s)\n", getrev(tmprev),
+ diva_capi_common_code_build, DIVA_BUILD);
+
+ if (!(init_capifunc())) {
+ printk(KERN_ERR "%s: failed init capi_driver.\n",
+ DRIVERLNAME);
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+/*
+ * module exit
+ */
+static void DIVA_EXIT_FUNCTION divacapi_exit(void)
+{
+ finit_capifunc();
+ printk(KERN_INFO "%s: module unloaded.\n", DRIVERLNAME);
+}
+
+module_init(divacapi_init);
+module_exit(divacapi_exit);