Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-remote.c b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c
new file mode 100644
index 0000000..9dc8b15
--- /dev/null
+++ b/drivers/media/dvb/dibusb/dvb-dibusb-remote.c
@@ -0,0 +1,316 @@
+/*
+ * dvb-dibusb-remote.c is part of the driver for mobile USB Budget DVB-T devices
+ * based on reference design made by DiBcom (http://www.dibcom.fr/)
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * see dvb-dibusb-core.c for more copyright details.
+ *
+ * This file contains functions for handling the event device on the software
+ * side and the remote control on the hardware side.
+ */
+#include "dvb-dibusb.h"
+
+/* Table to map raw key codes to key events. This should not be hard-wired
+ into the kernel. */
+static const struct { u8 c0, c1, c2; uint32_t key; } nec_rc_keys [] =
+{
+ /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
+ { 0x00, 0xff, 0x16, KEY_POWER },
+ { 0x00, 0xff, 0x10, KEY_MUTE },
+ { 0x00, 0xff, 0x03, KEY_1 },
+ { 0x00, 0xff, 0x01, KEY_2 },
+ { 0x00, 0xff, 0x06, KEY_3 },
+ { 0x00, 0xff, 0x09, KEY_4 },
+ { 0x00, 0xff, 0x1d, KEY_5 },
+ { 0x00, 0xff, 0x1f, KEY_6 },
+ { 0x00, 0xff, 0x0d, KEY_7 },
+ { 0x00, 0xff, 0x19, KEY_8 },
+ { 0x00, 0xff, 0x1b, KEY_9 },
+ { 0x00, 0xff, 0x15, KEY_0 },
+ { 0x00, 0xff, 0x05, KEY_CHANNELUP },
+ { 0x00, 0xff, 0x02, KEY_CHANNELDOWN },
+ { 0x00, 0xff, 0x1e, KEY_VOLUMEUP },
+ { 0x00, 0xff, 0x0a, KEY_VOLUMEDOWN },
+ { 0x00, 0xff, 0x11, KEY_RECORD },
+ { 0x00, 0xff, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */
+ { 0x00, 0xff, 0x14, KEY_PLAY },
+ { 0x00, 0xff, 0x1a, KEY_STOP },
+ { 0x00, 0xff, 0x40, KEY_REWIND },
+ { 0x00, 0xff, 0x12, KEY_FASTFORWARD },
+ { 0x00, 0xff, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */
+ { 0x00, 0xff, 0x4c, KEY_PAUSE },
+ { 0x00, 0xff, 0x4d, KEY_SCREEN }, /* Full screen mode. */
+ { 0x00, 0xff, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */
+ /* additional keys TwinHan VisionPlus, the Artec seemingly not have */
+ { 0x00, 0xff, 0x0c, KEY_CANCEL }, /* Cancel */
+ { 0x00, 0xff, 0x1c, KEY_EPG }, /* EPG */
+ { 0x00, 0xff, 0x00, KEY_TAB }, /* Tab */
+ { 0x00, 0xff, 0x48, KEY_INFO }, /* Preview */
+ { 0x00, 0xff, 0x04, KEY_LIST }, /* RecordList */
+ { 0x00, 0xff, 0x0f, KEY_TEXT }, /* Teletext */
+ /* Key codes for the KWorld/ADSTech/JetWay remote. */
+ { 0x86, 0x6b, 0x12, KEY_POWER },
+ { 0x86, 0x6b, 0x0f, KEY_SELECT }, /* source */
+ { 0x86, 0x6b, 0x0c, KEY_UNKNOWN }, /* scan */
+ { 0x86, 0x6b, 0x0b, KEY_EPG },
+ { 0x86, 0x6b, 0x10, KEY_MUTE },
+ { 0x86, 0x6b, 0x01, KEY_1 },
+ { 0x86, 0x6b, 0x02, KEY_2 },
+ { 0x86, 0x6b, 0x03, KEY_3 },
+ { 0x86, 0x6b, 0x04, KEY_4 },
+ { 0x86, 0x6b, 0x05, KEY_5 },
+ { 0x86, 0x6b, 0x06, KEY_6 },
+ { 0x86, 0x6b, 0x07, KEY_7 },
+ { 0x86, 0x6b, 0x08, KEY_8 },
+ { 0x86, 0x6b, 0x09, KEY_9 },
+ { 0x86, 0x6b, 0x0a, KEY_0 },
+ { 0x86, 0x6b, 0x18, KEY_ZOOM },
+ { 0x86, 0x6b, 0x1c, KEY_UNKNOWN }, /* preview */
+ { 0x86, 0x6b, 0x13, KEY_UNKNOWN }, /* snap */
+ { 0x86, 0x6b, 0x00, KEY_UNDO },
+ { 0x86, 0x6b, 0x1d, KEY_RECORD },
+ { 0x86, 0x6b, 0x0d, KEY_STOP },
+ { 0x86, 0x6b, 0x0e, KEY_PAUSE },
+ { 0x86, 0x6b, 0x16, KEY_PLAY },
+ { 0x86, 0x6b, 0x11, KEY_BACK },
+ { 0x86, 0x6b, 0x19, KEY_FORWARD },
+ { 0x86, 0x6b, 0x14, KEY_UNKNOWN }, /* pip */
+ { 0x86, 0x6b, 0x15, KEY_ESC },
+ { 0x86, 0x6b, 0x1a, KEY_UP },
+ { 0x86, 0x6b, 0x1e, KEY_DOWN },
+ { 0x86, 0x6b, 0x1f, KEY_LEFT },
+ { 0x86, 0x6b, 0x1b, KEY_RIGHT },
+};
+
+/* Hauppauge NOVA-T USB2 keys */
+static const struct { u16 raw; uint32_t key; } haupp_rc_keys [] = {
+ { 0xddf, KEY_GOTO },
+ { 0xdef, KEY_POWER },
+ { 0xce7, KEY_TV },
+ { 0xcc7, KEY_VIDEO },
+ { 0xccf, KEY_AUDIO },
+ { 0xcd7, KEY_MEDIA },
+ { 0xcdf, KEY_EPG },
+ { 0xca7, KEY_UP },
+ { 0xc67, KEY_RADIO },
+ { 0xcb7, KEY_LEFT },
+ { 0xd2f, KEY_OK },
+ { 0xcbf, KEY_RIGHT },
+ { 0xcff, KEY_BACK },
+ { 0xcaf, KEY_DOWN },
+ { 0xc6f, KEY_MENU },
+ { 0xc87, KEY_VOLUMEUP },
+ { 0xc8f, KEY_VOLUMEDOWN },
+ { 0xc97, KEY_CHANNEL },
+ { 0xc7f, KEY_MUTE },
+ { 0xd07, KEY_CHANNELUP },
+ { 0xd0f, KEY_CHANNELDOWN },
+ { 0xdbf, KEY_RECORD },
+ { 0xdb7, KEY_STOP },
+ { 0xd97, KEY_REWIND },
+ { 0xdaf, KEY_PLAY },
+ { 0xda7, KEY_FASTFORWARD },
+ { 0xd27, KEY_LAST }, /* Skip backwards */
+ { 0xd87, KEY_PAUSE },
+ { 0xcf7, KEY_NEXT },
+ { 0xc07, KEY_0 },
+ { 0xc0f, KEY_1 },
+ { 0xc17, KEY_2 },
+ { 0xc1f, KEY_3 },
+ { 0xc27, KEY_4 },
+ { 0xc2f, KEY_5 },
+ { 0xc37, KEY_6 },
+ { 0xc3f, KEY_7 },
+ { 0xc47, KEY_8 },
+ { 0xc4f, KEY_9 },
+ { 0xc57, KEY_KPASTERISK },
+ { 0xc77, KEY_GRAVE }, /* # */
+ { 0xc5f, KEY_RED },
+ { 0xd77, KEY_GREEN },
+ { 0xdc7, KEY_YELLOW },
+ { 0xd4f, KEY_BLUE},
+};
+
+static int dibusb_key2event_nec(struct usb_dibusb *dib,u8 rb[5])
+{
+ int i;
+ switch (rb[0]) {
+ case DIBUSB_RC_NEC_KEY_PRESSED:
+ /* rb[1-3] is the actual key, rb[4] is a checksum */
+ deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
+ rb[1], rb[2], rb[3], rb[4]);
+
+ if ((0xff - rb[3]) != rb[4]) {
+ deb_rc("remote control checksum failed.\n");
+ break;
+ }
+
+ /* See if we can match the raw key code. */
+ for (i = 0; i < sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++) {
+ if (nec_rc_keys[i].c0 == rb[1] &&
+ nec_rc_keys[i].c1 == rb[2] &&
+ nec_rc_keys[i].c2 == rb[3]) {
+
+ dib->last_event = nec_rc_keys[i].key;
+ return 1;
+ }
+ }
+ break;
+ case DIBUSB_RC_NEC_KEY_REPEATED:
+ /* rb[1]..rb[4] are always zero.*/
+ /* Repeats often seem to occur so for the moment just ignore this. */
+ return 0;
+ case DIBUSB_RC_NEC_EMPTY: /* No (more) remote control keys. */
+ default:
+ break;
+ }
+ return -1;
+}
+
+static int dibusb_key2event_hauppauge(struct usb_dibusb *dib,u8 rb[4])
+{
+ u16 raw;
+ int i,state;
+ switch (rb[0]) {
+ case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED:
+ raw = ((rb[1] & 0x0f) << 8) | rb[2];
+
+ state = !!(rb[1] & 0x40);
+
+ deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to %04x state: %d\n",rb[1],rb[2],rb[3],raw,state);
+ for (i = 0; i < sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++) {
+ if (haupp_rc_keys[i].raw == raw) {
+ if (dib->last_event == haupp_rc_keys[i].key &&
+ dib->last_state == state) {
+ deb_rc("key repeat\n");
+ return 0;
+ } else {
+ dib->last_event = haupp_rc_keys[i].key;
+ dib->last_state = state;
+ return 1;
+ }
+ }
+ }
+
+ break;
+ case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY:
+ default:
+ break;
+ }
+ return -1;
+}
+
+/*
+ * Read the remote control and feed the appropriate event.
+ * NEC protocol is used for remote controls
+ */
+static int dibusb_read_remote_control(struct usb_dibusb *dib)
+{
+ u8 b[1] = { DIBUSB_REQ_POLL_REMOTE }, rb[5];
+ int ret,event = 0;
+
+ if ((ret = dibusb_readwrite_usb(dib,b,1,rb,5)))
+ return ret;
+
+ switch (dib->dibdev->dev_cl->remote_type) {
+ case DIBUSB_RC_NEC_PROTOCOL:
+ event = dibusb_key2event_nec(dib,rb);
+ break;
+ case DIBUSB_RC_HAUPPAUGE_PROTO:
+ event = dibusb_key2event_hauppauge(dib,rb);
+ default:
+ break;
+ }
+
+ /* key repeat */
+ if (event == 0)
+ if (++dib->repeat_key_count < dib->rc_key_repeat_count) {
+ deb_rc("key repeat dropped. (%d)\n",dib->repeat_key_count);
+ event = -1; /* skip this key repeat */
+ }
+
+ if (event == 1 || event == 0) {
+ deb_rc("Translated key 0x%04x\n",event);
+
+ /* Signal down and up events for this key. */
+ input_report_key(&dib->rc_input_dev, dib->last_event, 1);
+ input_report_key(&dib->rc_input_dev, dib->last_event, 0);
+ input_sync(&dib->rc_input_dev);
+
+ if (event == 1)
+ dib->repeat_key_count = 0;
+ }
+ return 0;
+}
+
+/* Remote-control poll function - called every dib->rc_query_interval ms to see
+ whether the remote control has received anything. */
+static void dibusb_remote_query(void *data)
+{
+ struct usb_dibusb *dib = (struct usb_dibusb *) data;
+ /* TODO: need a lock here. We can simply skip checking for the remote control
+ if we're busy. */
+ dibusb_read_remote_control(dib);
+ schedule_delayed_work(&dib->rc_query_work,
+ msecs_to_jiffies(dib->rc_query_interval));
+}
+
+int dibusb_remote_init(struct usb_dibusb *dib)
+{
+ int i;
+
+ if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
+ return 0;
+
+ /* Initialise the remote-control structures.*/
+ init_input_dev(&dib->rc_input_dev);
+
+ dib->rc_input_dev.evbit[0] = BIT(EV_KEY);
+ dib->rc_input_dev.keycodesize = sizeof(unsigned char);
+ dib->rc_input_dev.keycodemax = KEY_MAX;
+ dib->rc_input_dev.name = DRIVER_DESC " remote control";
+
+ switch (dib->dibdev->dev_cl->remote_type) {
+ case DIBUSB_RC_NEC_PROTOCOL:
+ for (i=0; i<sizeof(nec_rc_keys)/sizeof(nec_rc_keys[0]); i++)
+ set_bit(nec_rc_keys[i].key, dib->rc_input_dev.keybit);
+ break;
+ case DIBUSB_RC_HAUPPAUGE_PROTO:
+ for (i=0; i<sizeof(haupp_rc_keys)/sizeof(haupp_rc_keys[0]); i++)
+ set_bit(haupp_rc_keys[i].key, dib->rc_input_dev.keybit);
+ break;
+ default:
+ break;
+ }
+
+
+ input_register_device(&dib->rc_input_dev);
+
+ INIT_WORK(&dib->rc_query_work, dibusb_remote_query, dib);
+
+ /* Start the remote-control polling. */
+ if (dib->rc_query_interval < 40)
+ dib->rc_query_interval = 100; /* default */
+
+ info("schedule remote query interval to %d msecs.",dib->rc_query_interval);
+ schedule_delayed_work(&dib->rc_query_work,msecs_to_jiffies(dib->rc_query_interval));
+
+ dib->init_state |= DIBUSB_STATE_REMOTE;
+
+ return 0;
+}
+
+int dibusb_remote_exit(struct usb_dibusb *dib)
+{
+ if (dib->dibdev->dev_cl->remote_type == DIBUSB_RC_NO)
+ return 0;
+
+ if (dib->init_state & DIBUSB_STATE_REMOTE) {
+ cancel_delayed_work(&dib->rc_query_work);
+ flush_scheduled_work();
+ input_unregister_device(&dib->rc_input_dev);
+ }
+ dib->init_state &= ~DIBUSB_STATE_REMOTE;
+ return 0;
+}