Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
new file mode 100644
index 0000000..83c605e
--- /dev/null
+++ b/drivers/net/irda/stir4200.c
@@ -0,0 +1,1184 @@
+/*****************************************************************************
+*
+* Filename: stir4200.c
+* Version: 0.4
+* Description: Irda SigmaTel USB Dongle
+* Status: Experimental
+* Author: Stephen Hemminger <shemminger@osdl.org>
+*
+* Based on earlier driver by Paul Stewart <stewart@parc.com>
+*
+* Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
+* Copyright (C) 2001, Dag Brattli <dag@brattli.net>
+* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+* Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+*****************************************************************************/
+
+/*
+ * This dongle does no framing, and requires polling to receive the
+ * data. The STIr4200 has bulk in and out endpoints just like
+ * usr-irda devices, but the data it sends and receives is raw; like
+ * irtty, it needs to call the wrap and unwrap functions to add and
+ * remove SOF/BOF and escape characters to/from the frame.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver for SigmaTel STIr4200");
+MODULE_LICENSE("GPL");
+
+static int qos_mtt_bits = 0x07; /* 1 ms or more */
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+
+static int rx_sensitivity = 1; /* FIR 0..4, SIR 0..6 */
+module_param(rx_sensitivity, int, 0);
+MODULE_PARM_DESC(rx_sensitivity, "Set Receiver sensitivity (0-6, 0 is most sensitive)");
+
+static int tx_power = 0; /* 0 = highest ... 3 = lowest */
+module_param(tx_power, int, 0);
+MODULE_PARM_DESC(tx_power, "Set Transmitter power (0-3, 0 is highest power)");
+
+#define STIR_IRDA_HEADER 4
+#define CTRL_TIMEOUT 100 /* milliseconds */
+#define TRANSMIT_TIMEOUT 200 /* milliseconds */
+#define STIR_FIFO_SIZE 4096
+#define FIFO_REGS_SIZE 3
+
+enum FirChars {
+ FIR_CE = 0x7d,
+ FIR_XBOF = 0x7f,
+ FIR_EOF = 0x7e,
+};
+
+enum StirRequests {
+ REQ_WRITE_REG = 0x00,
+ REQ_READ_REG = 0x01,
+ REQ_READ_ROM = 0x02,
+ REQ_WRITE_SINGLE = 0x03,
+};
+
+/* Register offsets */
+enum StirRegs {
+ REG_RSVD=0,
+ REG_MODE,
+ REG_PDCLK,
+ REG_CTRL1,
+ REG_CTRL2,
+ REG_FIFOCTL,
+ REG_FIFOLSB,
+ REG_FIFOMSB,
+ REG_DPLL,
+ REG_IRDIG,
+ REG_TEST=15,
+};
+
+enum StirModeMask {
+ MODE_FIR = 0x80,
+ MODE_SIR = 0x20,
+ MODE_ASK = 0x10,
+ MODE_FASTRX = 0x08,
+ MODE_FFRSTEN = 0x04,
+ MODE_NRESET = 0x02,
+ MODE_2400 = 0x01,
+};
+
+enum StirPdclkMask {
+ PDCLK_4000000 = 0x02,
+ PDCLK_115200 = 0x09,
+ PDCLK_57600 = 0x13,
+ PDCLK_38400 = 0x1D,
+ PDCLK_19200 = 0x3B,
+ PDCLK_9600 = 0x77,
+ PDCLK_2400 = 0xDF,
+};
+
+enum StirCtrl1Mask {
+ CTRL1_SDMODE = 0x80,
+ CTRL1_RXSLOW = 0x40,
+ CTRL1_TXPWD = 0x10,
+ CTRL1_RXPWD = 0x08,
+ CTRL1_SRESET = 0x01,
+};
+
+enum StirCtrl2Mask {
+ CTRL2_SPWIDTH = 0x08,
+ CTRL2_REVID = 0x03,
+};
+
+enum StirFifoCtlMask {
+ FIFOCTL_EOF = 0x80,
+ FIFOCTL_UNDER = 0x40,
+ FIFOCTL_OVER = 0x20,
+ FIFOCTL_DIR = 0x10,
+ FIFOCTL_CLR = 0x08,
+ FIFOCTL_EMPTY = 0x04,
+ FIFOCTL_RXERR = 0x02,
+ FIFOCTL_TXERR = 0x01,
+};
+
+enum StirDiagMask {
+ IRDIG_RXHIGH = 0x80,
+ IRDIG_RXLOW = 0x40,
+};
+
+enum StirTestMask {
+ TEST_PLLDOWN = 0x80,
+ TEST_LOOPIR = 0x40,
+ TEST_LOOPUSB = 0x20,
+ TEST_TSTENA = 0x10,
+ TEST_TSTOSC = 0x0F,
+};
+
+struct stir_cb {
+ struct usb_device *usbdev; /* init: probe_irda */
+ struct net_device *netdev; /* network layer */
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct net_device_stats stats; /* network statistics */
+ struct qos_info qos;
+ unsigned speed; /* Current speed */
+
+ wait_queue_head_t thr_wait; /* transmit thread wakeup */
+ struct completion thr_exited;
+ pid_t thr_pid;
+
+ struct sk_buff *tx_pending;
+ void *io_buf; /* transmit/receive buffer */
+ __u8 *fifo_status;
+
+ iobuff_t rx_buff; /* receive unwrap state machine */
+ struct timeval rx_time;
+ int receiving;
+ struct urb *rx_urb;
+};
+
+
+/* These are the currently known USB ids */
+static struct usb_device_id dongles[] = {
+ /* SigmaTel, Inc, STIr4200 IrDA/USB Bridge */
+ { USB_DEVICE(0x066f, 0x4200) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+/* Send control message to set dongle register */
+static int write_reg(struct stir_cb *stir, __u16 reg, __u8 value)
+{
+ struct usb_device *dev = stir->usbdev;
+
+ pr_debug("%s: write reg %d = 0x%x\n",
+ stir->netdev->name, reg, value);
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ REQ_WRITE_SINGLE,
+ USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE,
+ value, reg, NULL, 0,
+ CTRL_TIMEOUT);
+}
+
+/* Send control message to read multiple registers */
+static inline int read_reg(struct stir_cb *stir, __u16 reg,
+ __u8 *data, __u16 count)
+{
+ struct usb_device *dev = stir->usbdev;
+
+ return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ REQ_READ_REG,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, reg, data, count,
+ CTRL_TIMEOUT);
+}
+
+static inline int isfir(u32 speed)
+{
+ return (speed == 4000000);
+}
+
+/*
+ * Prepare a FIR IrDA frame for transmission to the USB dongle. The
+ * FIR transmit frame is documented in the datasheet. It consists of
+ * a two byte 0x55 0xAA sequence, two little-endian length bytes, a
+ * sequence of exactly 16 XBOF bytes of 0x7E, two BOF bytes of 0x7E,
+ * then the data escaped as follows:
+ *
+ * 0x7D -> 0x7D 0x5D
+ * 0x7E -> 0x7D 0x5E
+ * 0x7F -> 0x7D 0x5F
+ *
+ * Then, 4 bytes of little endian (stuffed) FCS follow, then two
+ * trailing EOF bytes of 0x7E.
+ */
+static inline __u8 *stuff_fir(__u8 *p, __u8 c)
+{
+ switch(c) {
+ case 0x7d:
+ case 0x7e:
+ case 0x7f:
+ *p++ = 0x7d;
+ c ^= IRDA_TRANS;
+ /* fall through */
+ default:
+ *p++ = c;
+ }
+ return p;
+}
+
+/* Take raw data in skb and put it wrapped into buf */
+static unsigned wrap_fir_skb(const struct sk_buff *skb, __u8 *buf)
+{
+ __u8 *ptr = buf;
+ __u32 fcs = ~(crc32_le(~0, skb->data, skb->len));
+ __u16 wraplen;
+ int i;
+
+ /* Header */
+ buf[0] = 0x55;
+ buf[1] = 0xAA;
+
+ ptr = buf + STIR_IRDA_HEADER;
+ memset(ptr, 0x7f, 16);
+ ptr += 16;
+
+ /* BOF */
+ *ptr++ = 0x7e;
+ *ptr++ = 0x7e;
+
+ /* Address / Control / Information */
+ for (i = 0; i < skb->len; i++)
+ ptr = stuff_fir(ptr, skb->data[i]);
+
+ /* FCS */
+ ptr = stuff_fir(ptr, fcs & 0xff);
+ ptr = stuff_fir(ptr, (fcs >> 8) & 0xff);
+ ptr = stuff_fir(ptr, (fcs >> 16) & 0xff);
+ ptr = stuff_fir(ptr, (fcs >> 24) & 0xff);
+
+ /* EOFs */
+ *ptr++ = 0x7e;
+ *ptr++ = 0x7e;
+
+ /* Total length, minus the header */
+ wraplen = (ptr - buf) - STIR_IRDA_HEADER;
+ buf[2] = wraplen & 0xff;
+ buf[3] = (wraplen >> 8) & 0xff;
+
+ return wraplen + STIR_IRDA_HEADER;
+}
+
+static unsigned wrap_sir_skb(struct sk_buff *skb, __u8 *buf)
+{
+ __u16 wraplen;
+
+ wraplen = async_wrap_skb(skb, buf + STIR_IRDA_HEADER,
+ STIR_FIFO_SIZE - STIR_IRDA_HEADER);
+ buf[0] = 0x55;
+ buf[1] = 0xAA;
+ buf[2] = wraplen & 0xff;
+ buf[3] = (wraplen >> 8) & 0xff;
+
+ return wraplen + STIR_IRDA_HEADER;
+}
+
+/*
+ * Frame is fully formed in the rx_buff so check crc
+ * and pass up to irlap
+ * setup for next receive
+ */
+static void fir_eof(struct stir_cb *stir)
+{
+ iobuff_t *rx_buff = &stir->rx_buff;
+ int len = rx_buff->len - 4;
+ struct sk_buff *skb, *nskb;
+ __u32 fcs;
+
+ if (unlikely(len <= 0)) {
+ pr_debug("%s: short frame len %d\n",
+ stir->netdev->name, len);
+
+ ++stir->stats.rx_errors;
+ ++stir->stats.rx_length_errors;
+ return;
+ }
+
+ fcs = ~(crc32_le(~0, rx_buff->data, len));
+ if (fcs != le32_to_cpu(get_unaligned((u32 *)(rx_buff->data+len)))) {
+ pr_debug("crc error calc 0x%x len %d\n", fcs, len);
+ stir->stats.rx_errors++;
+ stir->stats.rx_crc_errors++;
+ return;
+ }
+
+ /* if frame is short then just copy it */
+ if (len < IRDA_RX_COPY_THRESHOLD) {
+ nskb = dev_alloc_skb(len + 1);
+ if (unlikely(!nskb)) {
+ ++stir->stats.rx_dropped;
+ return;
+ }
+ skb_reserve(nskb, 1);
+ skb = nskb;
+ memcpy(nskb->data, rx_buff->data, len);
+ } else {
+ nskb = dev_alloc_skb(rx_buff->truesize);
+ if (unlikely(!nskb)) {
+ ++stir->stats.rx_dropped;
+ return;
+ }
+ skb_reserve(nskb, 1);
+ skb = rx_buff->skb;
+ rx_buff->skb = nskb;
+ rx_buff->head = nskb->data;
+ }
+
+ skb_put(skb, len);
+
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ skb->dev = stir->netdev;
+
+ netif_rx(skb);
+
+ stir->stats.rx_packets++;
+ stir->stats.rx_bytes += len;
+
+ rx_buff->data = rx_buff->head;
+ rx_buff->len = 0;
+}
+
+/* Unwrap FIR stuffed data and bump it to IrLAP */
+static void stir_fir_chars(struct stir_cb *stir,
+ const __u8 *bytes, int len)
+{
+ iobuff_t *rx_buff = &stir->rx_buff;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ __u8 byte = bytes[i];
+
+ switch(rx_buff->state) {
+ case OUTSIDE_FRAME:
+ /* ignore garbage till start of frame */
+ if (unlikely(byte != FIR_EOF))
+ continue;
+ /* Now receiving frame */
+ rx_buff->state = BEGIN_FRAME;
+
+ /* Time to initialize receive buffer */
+ rx_buff->data = rx_buff->head;
+ rx_buff->len = 0;
+ continue;
+
+ case LINK_ESCAPE:
+ if (byte == FIR_EOF) {
+ pr_debug("%s: got EOF after escape\n",
+ stir->netdev->name);
+ goto frame_error;
+ }
+ rx_buff->state = INSIDE_FRAME;
+ byte ^= IRDA_TRANS;
+ break;
+
+ case BEGIN_FRAME:
+ /* ignore multiple BOF/EOF */
+ if (byte == FIR_EOF)
+ continue;
+ rx_buff->state = INSIDE_FRAME;
+ rx_buff->in_frame = TRUE;
+
+ /* fall through */
+ case INSIDE_FRAME:
+ switch(byte) {
+ case FIR_CE:
+ rx_buff->state = LINK_ESCAPE;
+ continue;
+ case FIR_XBOF:
+ /* 0x7f is not used in this framing */
+ pr_debug("%s: got XBOF without escape\n",
+ stir->netdev->name);
+ goto frame_error;
+ case FIR_EOF:
+ rx_buff->state = OUTSIDE_FRAME;
+ rx_buff->in_frame = FALSE;
+ fir_eof(stir);
+ continue;
+ }
+ break;
+ }
+
+ /* add byte to rx buffer */
+ if (unlikely(rx_buff->len >= rx_buff->truesize)) {
+ pr_debug("%s: fir frame exceeds %d\n",
+ stir->netdev->name, rx_buff->truesize);
+ ++stir->stats.rx_over_errors;
+ goto error_recovery;
+ }
+
+ rx_buff->data[rx_buff->len++] = byte;
+ continue;
+
+ frame_error:
+ ++stir->stats.rx_frame_errors;
+
+ error_recovery:
+ ++stir->stats.rx_errors;
+ rx_buff->state = OUTSIDE_FRAME;
+ rx_buff->in_frame = FALSE;
+ }
+}
+
+/* Unwrap SIR stuffed data and bump it up to IrLAP */
+static void stir_sir_chars(struct stir_cb *stir,
+ const __u8 *bytes, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ async_unwrap_char(stir->netdev, &stir->stats,
+ &stir->rx_buff, bytes[i]);
+}
+
+static inline void unwrap_chars(struct stir_cb *stir,
+ const __u8 *bytes, int length)
+{
+ if (isfir(stir->speed))
+ stir_fir_chars(stir, bytes, length);
+ else
+ stir_sir_chars(stir, bytes, length);
+}
+
+/* Mode parameters for each speed */
+static const struct {
+ unsigned speed;
+ __u8 pdclk;
+} stir_modes[] = {
+ { 2400, PDCLK_2400 },
+ { 9600, PDCLK_9600 },
+ { 19200, PDCLK_19200 },
+ { 38400, PDCLK_38400 },
+ { 57600, PDCLK_57600 },
+ { 115200, PDCLK_115200 },
+ { 4000000, PDCLK_4000000 },
+};
+
+
+/*
+ * Setup chip for speed.
+ * Called at startup to initialize the chip
+ * and on speed changes.
+ *
+ * Note: Write multiple registers doesn't appear to work
+ */
+static int change_speed(struct stir_cb *stir, unsigned speed)
+{
+ int i, err;
+ __u8 mode;
+
+ for (i = 0; i < ARRAY_SIZE(stir_modes); ++i) {
+ if (speed == stir_modes[i].speed)
+ goto found;
+ }
+
+ warn("%s: invalid speed %d", stir->netdev->name, speed);
+ return -EINVAL;
+
+ found:
+ pr_debug("speed change from %d to %d\n", stir->speed, speed);
+
+ /* Reset modulator */
+ err = write_reg(stir, REG_CTRL1, CTRL1_SRESET);
+ if (err)
+ goto out;
+
+ /* Undocumented magic to tweak the DPLL */
+ err = write_reg(stir, REG_DPLL, 0x15);
+ if (err)
+ goto out;
+
+ /* Set clock */
+ err = write_reg(stir, REG_PDCLK, stir_modes[i].pdclk);
+ if (err)
+ goto out;
+
+ mode = MODE_NRESET | MODE_FASTRX;
+ if (isfir(speed))
+ mode |= MODE_FIR | MODE_FFRSTEN;
+ else
+ mode |= MODE_SIR;
+
+ if (speed == 2400)
+ mode |= MODE_2400;
+
+ err = write_reg(stir, REG_MODE, mode);
+ if (err)
+ goto out;
+
+ /* This resets TEMIC style transceiver if any. */
+ err = write_reg(stir, REG_CTRL1,
+ CTRL1_SDMODE | (tx_power & 3) << 1);
+ if (err)
+ goto out;
+
+ err = write_reg(stir, REG_CTRL1, (tx_power & 3) << 1);
+ if (err)
+ goto out;
+
+ /* Reset sensitivity */
+ err = write_reg(stir, REG_CTRL2, (rx_sensitivity & 7) << 5);
+ out:
+ stir->speed = speed;
+ return err;
+}
+
+/*
+ * Called from net/core when new frame is available.
+ */
+static int stir_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+
+ netif_stop_queue(netdev);
+
+ /* the IRDA wrapping routines don't deal with non linear skb */
+ SKB_LINEAR_ASSERT(skb);
+
+ skb = xchg(&stir->tx_pending, skb);
+ wake_up(&stir->thr_wait);
+
+ /* this should never happen unless stop/wakeup problem */
+ if (unlikely(skb)) {
+ WARN_ON(1);
+ dev_kfree_skb(skb);
+ }
+
+ return 0;
+}
+
+/*
+ * Wait for the transmit FIFO to have space for next data
+ *
+ * If space < 0 then wait till FIFO completely drains.
+ * FYI: can take up to 13 seconds at 2400baud.
+ */
+static int fifo_txwait(struct stir_cb *stir, int space)
+{
+ int err;
+ unsigned long count, status;
+
+ /* Read FIFO status and count */
+ for(;;) {
+ err = read_reg(stir, REG_FIFOCTL, stir->fifo_status,
+ FIFO_REGS_SIZE);
+ if (unlikely(err != FIFO_REGS_SIZE)) {
+ warn("%s: FIFO register read error: %d",
+ stir->netdev->name, err);
+
+ return err;
+ }
+
+ status = stir->fifo_status[0];
+ count = (unsigned)(stir->fifo_status[2] & 0x1f) << 8
+ | stir->fifo_status[1];
+
+ pr_debug("fifo status 0x%lx count %lu\n", status, count);
+
+ /* error when receive/transmit fifo gets confused */
+ if (status & FIFOCTL_RXERR) {
+ stir->stats.rx_fifo_errors++;
+ stir->stats.rx_errors++;
+ break;
+ }
+
+ if (status & FIFOCTL_TXERR) {
+ stir->stats.tx_fifo_errors++;
+ stir->stats.tx_errors++;
+ break;
+ }
+
+ /* is fifo receiving already, or empty */
+ if (!(status & FIFOCTL_DIR)
+ || (status & FIFOCTL_EMPTY))
+ return 0;
+
+ if (signal_pending(current))
+ return -EINTR;
+
+ /* shutting down? */
+ if (!netif_running(stir->netdev)
+ || !netif_device_present(stir->netdev))
+ return -ESHUTDOWN;
+
+ /* only waiting for some space */
+ if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count)
+ return 0;
+
+ /* estimate transfer time for remaining chars */
+ msleep((count * 8000) / stir->speed);
+ }
+
+ err = write_reg(stir, REG_FIFOCTL, FIFOCTL_CLR);
+ if (err)
+ return err;
+ err = write_reg(stir, REG_FIFOCTL, 0);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+
+/* Wait for turnaround delay before starting transmit. */
+static void turnaround_delay(const struct stir_cb *stir, long us)
+{
+ long ticks;
+ struct timeval now;
+
+ if (us <= 0)
+ return;
+
+ do_gettimeofday(&now);
+ if (now.tv_sec - stir->rx_time.tv_sec > 0)
+ us -= USEC_PER_SEC;
+ us -= now.tv_usec - stir->rx_time.tv_usec;
+ if (us < 10)
+ return;
+
+ ticks = us / (1000000 / HZ);
+ if (ticks > 0) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(1 + ticks);
+ } else
+ udelay(us);
+}
+
+/*
+ * Start receiver by submitting a request to the receive pipe.
+ * If nothing is available it will return after rx_interval.
+ */
+static int receive_start(struct stir_cb *stir)
+{
+ /* reset state */
+ stir->receiving = 1;
+
+ stir->rx_buff.in_frame = FALSE;
+ stir->rx_buff.state = OUTSIDE_FRAME;
+
+ stir->rx_urb->status = 0;
+ return usb_submit_urb(stir->rx_urb, GFP_KERNEL);
+}
+
+/* Stop all pending receive Urb's */
+static void receive_stop(struct stir_cb *stir)
+{
+ stir->receiving = 0;
+ usb_kill_urb(stir->rx_urb);
+
+ if (stir->rx_buff.in_frame)
+ stir->stats.collisions++;
+}
+/*
+ * Wrap data in socket buffer and send it.
+ */
+static void stir_send(struct stir_cb *stir, struct sk_buff *skb)
+{
+ unsigned wraplen;
+ int first_frame = 0;
+
+ /* if receiving, need to turnaround */
+ if (stir->receiving) {
+ receive_stop(stir);
+ turnaround_delay(stir, irda_get_mtt(skb));
+ first_frame = 1;
+ }
+
+ if (isfir(stir->speed))
+ wraplen = wrap_fir_skb(skb, stir->io_buf);
+ else
+ wraplen = wrap_sir_skb(skb, stir->io_buf);
+
+ /* check for space available in fifo */
+ if (!first_frame)
+ fifo_txwait(stir, wraplen);
+
+ stir->stats.tx_packets++;
+ stir->stats.tx_bytes += skb->len;
+ stir->netdev->trans_start = jiffies;
+ pr_debug("send %d (%d)\n", skb->len, wraplen);
+
+ if (usb_bulk_msg(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1),
+ stir->io_buf, wraplen,
+ NULL, TRANSMIT_TIMEOUT))
+ stir->stats.tx_errors++;
+}
+
+/*
+ * Transmit state machine thread
+ */
+static int stir_transmit_thread(void *arg)
+{
+ struct stir_cb *stir = arg;
+ struct net_device *dev = stir->netdev;
+ struct sk_buff *skb;
+
+ daemonize("%s", dev->name);
+ allow_signal(SIGTERM);
+
+ while (netif_running(dev)
+ && netif_device_present(dev)
+ && !signal_pending(current))
+ {
+#ifdef CONFIG_PM
+ /* if suspending, then power off and wait */
+ if (unlikely(current->flags & PF_FREEZE)) {
+ if (stir->receiving)
+ receive_stop(stir);
+ else
+ fifo_txwait(stir, -1);
+
+ write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD);
+
+ refrigerator(PF_FREEZE);
+
+ if (change_speed(stir, stir->speed))
+ break;
+ }
+#endif
+
+ /* if something to send? */
+ skb = xchg(&stir->tx_pending, NULL);
+ if (skb) {
+ unsigned new_speed = irda_get_next_speed(skb);
+ netif_wake_queue(dev);
+
+ if (skb->len > 0)
+ stir_send(stir, skb);
+ dev_kfree_skb(skb);
+
+ if ((new_speed != -1) && (stir->speed != new_speed)) {
+ if (fifo_txwait(stir, -1) ||
+ change_speed(stir, new_speed))
+ break;
+ }
+ continue;
+ }
+
+ /* nothing to send? start receiving */
+ if (!stir->receiving
+ && irda_device_txqueue_empty(dev)) {
+ /* Wait otherwise chip gets confused. */
+ if (fifo_txwait(stir, -1))
+ break;
+
+ if (unlikely(receive_start(stir))) {
+ if (net_ratelimit())
+ info("%s: receive usb submit failed",
+ stir->netdev->name);
+ stir->receiving = 0;
+ msleep(10);
+ continue;
+ }
+ }
+
+ /* sleep if nothing to send */
+ wait_event_interruptible(stir->thr_wait, stir->tx_pending);
+ }
+
+ complete_and_exit (&stir->thr_exited, 0);
+}
+
+
+/*
+ * USB bulk receive completion callback.
+ * Wakes up every ms (usb round trip) with wrapped
+ * data.
+ */
+static void stir_rcv_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct stir_cb *stir = urb->context;
+ int err;
+
+ /* in process of stopping, just drop data */
+ if (!netif_running(stir->netdev))
+ return;
+
+ /* unlink, shutdown, unplug, other nasties */
+ if (urb->status != 0)
+ return;
+
+ if (urb->actual_length > 0) {
+ pr_debug("receive %d\n", urb->actual_length);
+ unwrap_chars(stir, urb->transfer_buffer,
+ urb->actual_length);
+
+ stir->netdev->last_rx = jiffies;
+ do_gettimeofday(&stir->rx_time);
+ }
+
+ /* kernel thread is stopping receiver don't resubmit */
+ if (!stir->receiving)
+ return;
+
+ /* resubmit existing urb */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+
+ /* in case of error, the kernel thread will restart us */
+ if (err) {
+ warn("%s: usb receive submit error: %d",
+ stir->netdev->name, err);
+ stir->receiving = 0;
+ wake_up(&stir->thr_wait);
+ }
+}
+
+/*
+ * Function stir_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ */
+static int stir_net_open(struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+ int err;
+ char hwname[16];
+
+ err = usb_clear_halt(stir->usbdev, usb_sndbulkpipe(stir->usbdev, 1));
+ if (err)
+ goto err_out1;
+ err = usb_clear_halt(stir->usbdev, usb_rcvbulkpipe(stir->usbdev, 2));
+ if (err)
+ goto err_out1;
+
+ err = change_speed(stir, 9600);
+ if (err)
+ goto err_out1;
+
+ err = -ENOMEM;
+
+ /* Initialize for SIR/FIR to copy data directly into skb. */
+ stir->receiving = 0;
+ stir->rx_buff.truesize = IRDA_SKB_MAX_MTU;
+ stir->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+ if (!stir->rx_buff.skb)
+ goto err_out1;
+
+ skb_reserve(stir->rx_buff.skb, 1);
+ stir->rx_buff.head = stir->rx_buff.skb->data;
+ do_gettimeofday(&stir->rx_time);
+
+ stir->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!stir->rx_urb)
+ goto err_out2;
+
+ stir->io_buf = kmalloc(STIR_FIFO_SIZE, GFP_KERNEL);
+ if (!stir->io_buf)
+ goto err_out3;
+
+ usb_fill_bulk_urb(stir->rx_urb, stir->usbdev,
+ usb_rcvbulkpipe(stir->usbdev, 2),
+ stir->io_buf, STIR_FIFO_SIZE,
+ stir_rcv_irq, stir);
+
+ stir->fifo_status = kmalloc(FIFO_REGS_SIZE, GFP_KERNEL);
+ if (!stir->fifo_status)
+ goto err_out4;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ * Note : will send immediately a speed change...
+ */
+ sprintf(hwname, "usb#%d", stir->usbdev->devnum);
+ stir->irlap = irlap_open(netdev, &stir->qos, hwname);
+ if (!stir->irlap) {
+ err("stir4200: irlap_open failed");
+ goto err_out5;
+ }
+
+ /** Start kernel thread for transmit. */
+ stir->thr_pid = kernel_thread(stir_transmit_thread, stir,
+ CLONE_FS|CLONE_FILES);
+ if (stir->thr_pid < 0) {
+ err = stir->thr_pid;
+ err("stir4200: unable to start kernel thread");
+ goto err_out6;
+ }
+
+ netif_start_queue(netdev);
+
+ return 0;
+
+ err_out6:
+ irlap_close(stir->irlap);
+ err_out5:
+ kfree(stir->fifo_status);
+ err_out4:
+ kfree(stir->io_buf);
+ err_out3:
+ usb_free_urb(stir->rx_urb);
+ err_out2:
+ kfree_skb(stir->rx_buff.skb);
+ err_out1:
+ return err;
+}
+
+/*
+ * Function stir_net_close (stir)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int stir_net_close(struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+
+ /* Stop transmit processing */
+ netif_stop_queue(netdev);
+
+ /* Kill transmit thread */
+ kill_proc(stir->thr_pid, SIGTERM, 1);
+ wait_for_completion(&stir->thr_exited);
+ kfree(stir->fifo_status);
+
+ /* Mop up receive urb's */
+ usb_kill_urb(stir->rx_urb);
+
+ kfree(stir->io_buf);
+ usb_free_urb(stir->rx_urb);
+ kfree_skb(stir->rx_buff.skb);
+
+ /* Stop and remove instance of IrLAP */
+ if (stir->irlap)
+ irlap_close(stir->irlap);
+
+ stir->irlap = NULL;
+
+ return 0;
+}
+
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int stir_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct stir_cb *stir = netdev_priv(netdev);
+ int ret = 0;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the device is still there */
+ if (netif_device_present(stir->netdev))
+ ret = change_speed(stir, irq->ifr_baudrate);
+ break;
+
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* Check if the IrDA stack is still there */
+ if (netif_running(stir->netdev))
+ irda_device_set_media_busy(stir->netdev, TRUE);
+ break;
+
+ case SIOCGRECEIVING:
+ /* Only approximately true */
+ irq->ifr_receiving = stir->receiving;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *stir_net_get_stats(struct net_device *netdev)
+{
+ struct stir_cb *stir = netdev_priv(netdev);
+ return &stir->stats;
+}
+
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ * Note : it might be worth protecting this function by a global
+ * spinlock... Or not, because maybe USB already deal with that...
+ */
+static int stir_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct stir_cb *stir = NULL;
+ struct net_device *net;
+ int ret = -ENOMEM;
+
+ /* Allocate network device container. */
+ net = alloc_irdadev(sizeof(*stir));
+ if(!net)
+ goto err_out1;
+
+ SET_MODULE_OWNER(net);
+ SET_NETDEV_DEV(net, &intf->dev);
+ stir = netdev_priv(net);
+ stir->netdev = net;
+ stir->usbdev = dev;
+
+ ret = usb_reset_configuration(dev);
+ if (ret != 0) {
+ err("stir4200: usb reset configuration failed");
+ goto err_out2;
+ }
+
+ printk(KERN_INFO "SigmaTel STIr4200 IRDA/USB found at address %d, "
+ "Vendor: %x, Product: %x\n",
+ dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&stir->qos);
+
+ /* That's the Rx capability. */
+ stir->qos.baud_rate.bits &= IR_2400 | IR_9600 | IR_19200 |
+ IR_38400 | IR_57600 | IR_115200 |
+ (IR_4000000 << 8);
+ stir->qos.min_turn_time.bits &= qos_mtt_bits;
+ irda_qos_bits_to_value(&stir->qos);
+
+ init_completion (&stir->thr_exited);
+ init_waitqueue_head (&stir->thr_wait);
+
+ /* Override the network functions we need to use */
+ net->hard_start_xmit = stir_hard_xmit;
+ net->open = stir_net_open;
+ net->stop = stir_net_close;
+ net->get_stats = stir_net_get_stats;
+ net->do_ioctl = stir_net_ioctl;
+
+ ret = register_netdev(net);
+ if (ret != 0)
+ goto err_out2;
+
+ info("IrDA: Registered SigmaTel device %s", net->name);
+
+ usb_set_intfdata(intf, stir);
+
+ return 0;
+
+err_out2:
+ free_netdev(net);
+err_out1:
+ return ret;
+}
+
+/*
+ * The current device is removed, the USB layer tell us to shut it down...
+ */
+static void stir_disconnect(struct usb_interface *intf)
+{
+ struct stir_cb *stir = usb_get_intfdata(intf);
+
+ if (!stir)
+ return;
+
+ unregister_netdev(stir->netdev);
+ free_netdev(stir->netdev);
+
+ usb_set_intfdata(intf, NULL);
+}
+
+#ifdef CONFIG_PM
+/* Power management suspend, so power off the transmitter/receiver */
+static int stir_suspend(struct usb_interface *intf, u32 state)
+{
+ struct stir_cb *stir = usb_get_intfdata(intf);
+
+ netif_device_detach(stir->netdev);
+ return 0;
+}
+
+/* Coming out of suspend, so reset hardware */
+static int stir_resume(struct usb_interface *intf)
+{
+ struct stir_cb *stir = usb_get_intfdata(intf);
+
+ netif_device_attach(stir->netdev);
+
+ /* receiver restarted when send thread wakes up */
+ return 0;
+}
+#endif
+
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+ .owner = THIS_MODULE,
+ .name = "stir4200",
+ .probe = stir_probe,
+ .disconnect = stir_disconnect,
+ .id_table = dongles,
+#ifdef CONFIG_PM
+ .suspend = stir_suspend,
+ .resume = stir_resume,
+#endif
+};
+
+/*
+ * Module insertion
+ */
+static int __init stir_init(void)
+{
+ return usb_register(&irda_driver);
+}
+module_init(stir_init);
+
+/*
+ * Module removal
+ */
+static void __exit stir_cleanup(void)
+{
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+module_exit(stir_cleanup);