Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
new file mode 100644
index 0000000..6783039
--- /dev/null
+++ b/drivers/net/sk98lin/Makefile
@@ -0,0 +1,89 @@
+#
+# Makefile for the SysKonnect SK-98xx device driver.
+#
+
+
+#
+# Standalone driver params
+# SKPARAM += -DSK_KERNEL_24
+# SKPARAM += -DSK_KERNEL_24_26
+# SKPARAM += -DSK_KERNEL_26
+# SKPARAM += -DSK_KERNEL_22_24
+
+obj-$(CONFIG_SK98LIN) += sk98lin.o
+sk98lin-objs := \
+ skge.o \
+ skethtool.o \
+ skdim.o \
+ skaddr.o \
+ skgehwt.o \
+ skgeinit.o \
+ skgepnmi.o \
+ skgesirq.o \
+ ski2c.o \
+ sklm80.o \
+ skqueue.o \
+ skrlmt.o \
+ sktimer.o \
+ skvpd.o \
+ skxmac2.o \
+ skproc.o \
+ skcsum.o
+
+# DBGDEF = \
+# -DDEBUG
+
+ifdef DEBUG
+DBGDEF += \
+-DSK_DEBUG_CHKMOD=0x00000000L \
+-DSK_DEBUG_CHKCAT=0x00000000L
+endif
+
+
+# **** possible debug modules for SK_DEBUG_CHKMOD *****************
+# SK_DBGMOD_MERR 0x00000001L /* general module error indication */
+# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
+# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
+# SK_DBGMOD_VPD 0x00000008L /* VPD module */
+# SK_DBGMOD_I2C 0x00000010L /* I2C module */
+# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
+# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
+# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
+# SK_DBGMOD_DRV 0x00010000L /* DRV module */
+
+# **** possible debug categories for SK_DEBUG_CHKCAT **************
+# *** common modules ***
+# SK_DBGCAT_INIT 0x00000001L module/driver initialization
+# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL)
+# SK_DBGCAT_ERR 0x00000004L error handling paths
+# SK_DBGCAT_TX 0x00000008L transmit path
+# SK_DBGCAT_RX 0x00000010L receive path
+# SK_DBGCAT_IRQ 0x00000020L general IRQ handling
+# SK_DBGCAT_QUEUE 0x00000040L any queue management
+# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump
+# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump
+
+# *** driver (file skge.c) ***
+# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points
+# SK_DBGCAT_DRV_??? 0x00020000 not used
+# SK_DBGCAT_DRV_MCA 0x00040000 multicast
+# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path
+# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path
+# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime
+# SK_DBGCAT_DRV_??? 0x00400000 not used
+# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode
+# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames
+# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions
+# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
+# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
+
+EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DSK_USE_CSUM -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
+
+clean:
+ rm -f core *.o *.a *.s
+
+
+
+
+
+