Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
new file mode 100644
index 0000000..44fd4c3
--- /dev/null
+++ b/drivers/net/sk98lin/h/skgedrv.h
@@ -0,0 +1,51 @@
+/******************************************************************************
+ *
+ * Name: skgedrv.h
+ * Project: Gigabit Ethernet Adapters, Common Modules
+ * Version: $Revision: 1.10 $
+ * Date: $Date: 2003/07/04 12:25:01 $
+ * Purpose: Interface with the driver
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * (C)Copyright 1998-2002 SysKonnect.
+ * (C)Copyright 2002-2003 Marvell.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEDRV_H_
+#define __INC_SKGEDRV_H_
+
+/* defines ********************************************************************/
+
+/*
+ * Define the driver events.
+ * Usually the events are defined by the destination module.
+ * In case of the driver we put the definition of the events here.
+ */
+#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
+#define SK_DRV_NET_UP 2 /* The net is operational */
+#define SK_DRV_NET_DOWN 3 /* The net is down */
+#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */
+#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
+#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
+#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
+#define SK_DRV_PORT_FAIL 8 /* One port fails */
+#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */
+#define SK_DRV_POWER_DOWN 10 /* Power down mode */
+#define SK_DRV_TIMER 11 /* Timer for free use */
+#ifdef SK_NO_RLMT
+#define SK_DRV_LINK_UP 12 /* Link Up event for driver */
+#define SK_DRV_LINK_DOWN 13 /* Link Down event for driver */
+#endif
+#define SK_DRV_DOWNSHIFT_DET 14 /* Downshift 4-Pair / 2-Pair (YUKON only) */
+#endif /* __INC_SKGEDRV_H_ */