diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
new file mode 100644
index 0000000..0e98a9d
--- /dev/null
+++ b/drivers/parisc/ccio-dma.c
@@ -0,0 +1,1593 @@
+/*
+** ccio-dma.c:
+**	DMA management routines for first generation cache-coherent machines.
+**	Program U2/Uturn in "Virtual Mode" and use the I/O MMU.
+**
+**	(c) Copyright 2000 Grant Grundler
+**	(c) Copyright 2000 Ryan Bradetich
+**	(c) Copyright 2000 Hewlett-Packard Company
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+**
+**  "Real Mode" operation refers to U2/Uturn chip operation.
+**  U2/Uturn were designed to perform coherency checks w/o using
+**  the I/O MMU - basically what x86 does.
+**
+**  Philipp Rumpf has a "Real Mode" driver for PCX-W machines at:
+**      CVSROOT=:pserver:anonymous@198.186.203.37:/cvsroot/linux-parisc
+**      cvs -z3 co linux/arch/parisc/kernel/dma-rm.c
+**
+**  I've rewritten his code to work under TPG's tree. See ccio-rm-dma.c.
+**
+**  Drawbacks of using Real Mode are:
+**	o outbound DMA is slower - U2 won't prefetch data (GSC+ XQL signal).
+**      o Inbound DMA less efficient - U2 can't use DMA_FAST attribute.
+**	o Ability to do scatter/gather in HW is lost.
+**	o Doesn't work under PCX-U/U+ machines since they didn't follow
+**        the coherency design originally worked out. Only PCX-W does.
+*/
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/reboot.h>
+
+#include <asm/byteorder.h>
+#include <asm/cache.h>		/* for L1_CACHE_BYTES */
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/hardware.h>       /* for register_module() */
+#include <asm/parisc-device.h>
+
+/* 
+** Choose "ccio" since that's what HP-UX calls it.
+** Make it easier for folks to migrate from one to the other :^)
+*/
+#define MODULE_NAME "ccio"
+
+#undef DEBUG_CCIO_RES
+#undef DEBUG_CCIO_RUN
+#undef DEBUG_CCIO_INIT
+#undef DEBUG_CCIO_RUN_SG
+
+#ifdef CONFIG_PROC_FS
+/*
+ * CCIO_SEARCH_TIME can help measure how fast the bitmap search is.
+ * impacts performance though - ditch it if you don't use it.
+ */
+#define CCIO_SEARCH_TIME
+#undef CCIO_MAP_STATS
+#else
+#undef CCIO_SEARCH_TIME
+#undef CCIO_MAP_STATS
+#endif
+
+#include <linux/proc_fs.h>
+#include <asm/runway.h>		/* for proc_runway_root */
+
+#ifdef DEBUG_CCIO_INIT
+#define DBG_INIT(x...)  printk(x)
+#else
+#define DBG_INIT(x...)
+#endif
+
+#ifdef DEBUG_CCIO_RUN
+#define DBG_RUN(x...)   printk(x)
+#else
+#define DBG_RUN(x...)
+#endif
+
+#ifdef DEBUG_CCIO_RES
+#define DBG_RES(x...)   printk(x)
+#else
+#define DBG_RES(x...)
+#endif
+
+#ifdef DEBUG_CCIO_RUN_SG
+#define DBG_RUN_SG(x...) printk(x)
+#else
+#define DBG_RUN_SG(x...)
+#endif
+
+#define CCIO_INLINE	/* inline */
+#define WRITE_U32(value, addr) gsc_writel(value, (u32 *)(addr))
+#define READ_U32(addr) gsc_readl((u32 *)(addr))
+
+#define U2_IOA_RUNWAY 0x580
+#define U2_BC_GSC     0x501
+#define UTURN_IOA_RUNWAY 0x581
+#define UTURN_BC_GSC     0x502
+
+#define IOA_NORMAL_MODE      0x00020080 /* IO_CONTROL to turn on CCIO        */
+#define CMD_TLB_DIRECT_WRITE 35         /* IO_COMMAND for I/O TLB Writes     */
+#define CMD_TLB_PURGE        33         /* IO_COMMAND to Purge I/O TLB entry */
+
+struct ioa_registers {
+        /* Runway Supervisory Set */
+        volatile int32_t    unused1[12];
+        volatile uint32_t   io_command;             /* Offset 12 */
+        volatile uint32_t   io_status;              /* Offset 13 */
+        volatile uint32_t   io_control;             /* Offset 14 */
+        volatile int32_t    unused2[1];
+
+        /* Runway Auxiliary Register Set */
+        volatile uint32_t   io_err_resp;            /* Offset  0 */
+        volatile uint32_t   io_err_info;            /* Offset  1 */
+        volatile uint32_t   io_err_req;             /* Offset  2 */
+        volatile uint32_t   io_err_resp_hi;         /* Offset  3 */
+        volatile uint32_t   io_tlb_entry_m;         /* Offset  4 */
+        volatile uint32_t   io_tlb_entry_l;         /* Offset  5 */
+        volatile uint32_t   unused3[1];
+        volatile uint32_t   io_pdir_base;           /* Offset  7 */
+        volatile uint32_t   io_io_low_hv;           /* Offset  8 */
+        volatile uint32_t   io_io_high_hv;          /* Offset  9 */
+        volatile uint32_t   unused4[1];
+        volatile uint32_t   io_chain_id_mask;       /* Offset 11 */
+        volatile uint32_t   unused5[2];
+        volatile uint32_t   io_io_low;              /* Offset 14 */
+        volatile uint32_t   io_io_high;             /* Offset 15 */
+};
+
+/*
+** IOA Registers
+** -------------
+**
+** Runway IO_CONTROL Register (+0x38)
+** 
+** The Runway IO_CONTROL register controls the forwarding of transactions.
+**
+** | 0  ...  13  |  14 15 | 16 ... 21 | 22 | 23 24 |  25 ... 31 |
+** |    HV       |   TLB  |  reserved | HV | mode  |  reserved  |
+**
+** o mode field indicates the address translation of transactions
+**   forwarded from Runway to GSC+:
+**       Mode Name     Value        Definition
+**       Off (default)   0          Opaque to matching addresses.
+**       Include         1          Transparent for matching addresses.
+**       Peek            3          Map matching addresses.
+**
+**       + "Off" mode: Runway transactions which match the I/O range
+**         specified by the IO_IO_LOW/IO_IO_HIGH registers will be ignored.
+**       + "Include" mode: all addresses within the I/O range specified
+**         by the IO_IO_LOW and IO_IO_HIGH registers are transparently
+**         forwarded. This is the I/O Adapter's normal operating mode.
+**       + "Peek" mode: used during system configuration to initialize the
+**         GSC+ bus. Runway Write_Shorts in the address range specified by
+**         IO_IO_LOW and IO_IO_HIGH are forwarded through the I/O Adapter
+**         *AND* the GSC+ address is remapped to the Broadcast Physical
+**         Address space by setting the 14 high order address bits of the
+**         32 bit GSC+ address to ones.
+**
+** o TLB field affects transactions which are forwarded from GSC+ to Runway.
+**   "Real" mode is the poweron default.
+** 
+**   TLB Mode  Value  Description
+**   Real        0    No TLB translation. Address is directly mapped and the
+**                    virtual address is composed of selected physical bits.
+**   Error       1    Software fills the TLB manually.
+**   Normal      2    IOA fetches IO TLB misses from IO PDIR (in host memory).
+**
+**
+** IO_IO_LOW_HV	  +0x60 (HV dependent)
+** IO_IO_HIGH_HV  +0x64 (HV dependent)
+** IO_IO_LOW      +0x78	(Architected register)
+** IO_IO_HIGH     +0x7c	(Architected register)
+**
+** IO_IO_LOW and IO_IO_HIGH set the lower and upper bounds of the
+** I/O Adapter address space, respectively.
+**
+** 0  ... 7 | 8 ... 15 |  16   ...   31 |
+** 11111111 | 11111111 |      address   |
+**
+** Each LOW/HIGH pair describes a disjoint address space region.
+** (2 per GSC+ port). Each incoming Runway transaction address is compared
+** with both sets of LOW/HIGH registers. If the address is in the range
+** greater than or equal to IO_IO_LOW and less than IO_IO_HIGH the transaction
+** for forwarded to the respective GSC+ bus.
+** Specify IO_IO_LOW equal to or greater than IO_IO_HIGH to avoid specifying
+** an address space region.
+**
+** In order for a Runway address to reside within GSC+ extended address space:
+**	Runway Address [0:7]    must identically compare to 8'b11111111
+**	Runway Address [8:11]   must be equal to IO_IO_LOW(_HV)[16:19]
+** 	Runway Address [12:23]  must be greater than or equal to
+**	           IO_IO_LOW(_HV)[20:31] and less than IO_IO_HIGH(_HV)[20:31].
+**	Runway Address [24:39]  is not used in the comparison.
+**
+** When the Runway transaction is forwarded to GSC+, the GSC+ address is
+** as follows:
+**	GSC+ Address[0:3]	4'b1111
+**	GSC+ Address[4:29]	Runway Address[12:37]
+**	GSC+ Address[30:31]	2'b00
+**
+** All 4 Low/High registers must be initialized (by PDC) once the lower bus
+** is interrogated and address space is defined. The operating system will
+** modify the architectural IO_IO_LOW and IO_IO_HIGH registers following
+** the PDC initialization.  However, the hardware version dependent IO_IO_LOW
+** and IO_IO_HIGH registers should not be subsequently altered by the OS.
+** 
+** Writes to both sets of registers will take effect immediately, bypassing
+** the queues, which ensures that subsequent Runway transactions are checked
+** against the updated bounds values. However reads are queued, introducing
+** the possibility of a read being bypassed by a subsequent write to the same
+** register. This sequence can be avoided by having software wait for read
+** returns before issuing subsequent writes.
+*/
+
+struct ioc {
+	struct ioa_registers *ioc_hpa;  /* I/O MMU base address */
+	u8  *res_map;	                /* resource map, bit == pdir entry */
+	u64 *pdir_base;	                /* physical base address */
+	u32 pdir_size; 			/* bytes, function of IOV Space size */
+	u32 res_hint;	                /* next available IOVP - 
+					   circular search */
+	u32 res_size;		    	/* size of resource map in bytes */
+	spinlock_t res_lock;
+
+#ifdef CCIO_SEARCH_TIME
+#define CCIO_SEARCH_SAMPLE 0x100
+	unsigned long avg_search[CCIO_SEARCH_SAMPLE];
+	unsigned long avg_idx;		  /* current index into avg_search */
+#endif
+#ifdef CCIO_MAP_STATS
+	unsigned long used_pages;
+	unsigned long msingle_calls;
+	unsigned long msingle_pages;
+	unsigned long msg_calls;
+	unsigned long msg_pages;
+	unsigned long usingle_calls;
+	unsigned long usingle_pages;
+	unsigned long usg_calls;
+	unsigned long usg_pages;
+#endif
+	unsigned short cujo20_bug;
+
+	/* STUFF We don't need in performance path */
+	u32 chainid_shift; 		/* specify bit location of chain_id */
+	struct ioc *next;		/* Linked list of discovered iocs */
+	const char *name;		/* device name from firmware */
+	unsigned int hw_path;           /* the hardware path this ioc is associatd with */
+	struct pci_dev *fake_pci_dev;   /* the fake pci_dev for non-pci devs */
+	struct resource mmio_region[2]; /* The "routed" MMIO regions */
+};
+
+static struct ioc *ioc_list;
+static int ioc_count;
+
+/**************************************************************
+*
+*   I/O Pdir Resource Management
+*
+*   Bits set in the resource map are in use.
+*   Each bit can represent a number of pages.
+*   LSbs represent lower addresses (IOVA's).
+*
+*   This was was copied from sba_iommu.c. Don't try to unify
+*   the two resource managers unless a way to have different
+*   allocation policies is also adjusted. We'd like to avoid
+*   I/O TLB thrashing by having resource allocation policy
+*   match the I/O TLB replacement policy.
+*
+***************************************************************/
+#define IOVP_SIZE PAGE_SIZE
+#define IOVP_SHIFT PAGE_SHIFT
+#define IOVP_MASK PAGE_MASK
+
+/* Convert from IOVP to IOVA and vice versa. */
+#define CCIO_IOVA(iovp,offset) ((iovp) | (offset))
+#define CCIO_IOVP(iova) ((iova) & IOVP_MASK)
+
+#define PDIR_INDEX(iovp)    ((iovp)>>IOVP_SHIFT)
+#define MKIOVP(pdir_idx)    ((long)(pdir_idx) << IOVP_SHIFT)
+#define MKIOVA(iovp,offset) (dma_addr_t)((long)iovp | (long)offset)
+#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
+
+/*
+** Don't worry about the 150% average search length on a miss.
+** If the search wraps around, and passes the res_hint, it will
+** cause the kernel to panic anyhow.
+*/
+#define CCIO_SEARCH_LOOP(ioc, res_idx, mask, size)  \
+       for(; res_ptr < res_end; ++res_ptr) { \
+               if(0 == (*res_ptr & mask)) { \
+                       *res_ptr |= mask; \
+                       res_idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \
+                       ioc->res_hint = res_idx + (size >> 3); \
+                       goto resource_found; \
+               } \
+       }
+
+#define CCIO_FIND_FREE_MAPPING(ioa, res_idx, mask, size) \
+       u##size *res_ptr = (u##size *)&((ioc)->res_map[ioa->res_hint & ~((size >> 3) - 1)]); \
+       u##size *res_end = (u##size *)&(ioc)->res_map[ioa->res_size]; \
+       CCIO_SEARCH_LOOP(ioc, res_idx, mask, size); \
+       res_ptr = (u##size *)&(ioc)->res_map[0]; \
+       CCIO_SEARCH_LOOP(ioa, res_idx, mask, size);
+
+/*
+** Find available bit in this ioa's resource map.
+** Use a "circular" search:
+**   o Most IOVA's are "temporary" - avg search time should be small.
+** o keep a history of what happened for debugging
+** o KISS.
+**
+** Perf optimizations:
+** o search for log2(size) bits at a time.
+** o search for available resource bits using byte/word/whatever.
+** o use different search for "large" (eg > 4 pages) or "very large"
+**   (eg > 16 pages) mappings.
+*/
+
+/**
+ * ccio_alloc_range - Allocate pages in the ioc's resource map.
+ * @ioc: The I/O Controller.
+ * @pages_needed: The requested number of pages to be mapped into the
+ * I/O Pdir...
+ *
+ * This function searches the resource map of the ioc to locate a range
+ * of available pages for the requested size.
+ */
+static int
+ccio_alloc_range(struct ioc *ioc, size_t size)
+{
+	unsigned int pages_needed = size >> IOVP_SHIFT;
+	unsigned int res_idx;
+#ifdef CCIO_SEARCH_TIME
+	unsigned long cr_start = mfctl(16);
+#endif
+	
+	BUG_ON(pages_needed == 0);
+	BUG_ON((pages_needed * IOVP_SIZE) > DMA_CHUNK_SIZE);
+     
+	DBG_RES("%s() size: %d pages_needed %d\n", 
+		__FUNCTION__, size, pages_needed);
+
+	/*
+	** "seek and ye shall find"...praying never hurts either...
+	** ggg sacrifices another 710 to the computer gods.
+	*/
+
+	if (pages_needed <= 8) {
+		/*
+		 * LAN traffic will not thrash the TLB IFF the same NIC
+		 * uses 8 adjacent pages to map seperate payload data.
+		 * ie the same byte in the resource bit map.
+		 */
+#if 0
+		/* FIXME: bit search should shift it's way through
+		 * an unsigned long - not byte at a time. As it is now,
+		 * we effectively allocate this byte to this mapping.
+		 */
+		unsigned long mask = ~(~0UL >> pages_needed);
+		CCIO_FIND_FREE_MAPPING(ioc, res_idx, mask, 8);
+#else
+		CCIO_FIND_FREE_MAPPING(ioc, res_idx, 0xff, 8);
+#endif
+	} else if (pages_needed <= 16) {
+		CCIO_FIND_FREE_MAPPING(ioc, res_idx, 0xffff, 16);
+	} else if (pages_needed <= 32) {
+		CCIO_FIND_FREE_MAPPING(ioc, res_idx, ~(unsigned int)0, 32);
+#ifdef __LP64__
+	} else if (pages_needed <= 64) {
+		CCIO_FIND_FREE_MAPPING(ioc, res_idx, ~0UL, 64);
+#endif
+	} else {
+		panic("%s: %s() Too many pages to map. pages_needed: %u\n",
+		       __FILE__,  __FUNCTION__, pages_needed);
+	}
+
+	panic("%s: %s() I/O MMU is out of mapping resources.\n", __FILE__,
+	      __FUNCTION__);
+	
+resource_found:
+	
+	DBG_RES("%s() res_idx %d res_hint: %d\n",
+		__FUNCTION__, res_idx, ioc->res_hint);
+
+#ifdef CCIO_SEARCH_TIME
+	{
+		unsigned long cr_end = mfctl(16);
+		unsigned long tmp = cr_end - cr_start;
+		/* check for roll over */
+		cr_start = (cr_end < cr_start) ?  -(tmp) : (tmp);
+	}
+	ioc->avg_search[ioc->avg_idx++] = cr_start;
+	ioc->avg_idx &= CCIO_SEARCH_SAMPLE - 1;
+#endif
+#ifdef CCIO_MAP_STATS
+	ioc->used_pages += pages_needed;
+#endif
+	/* 
+	** return the bit address.
+	*/
+	return res_idx << 3;
+}
+
+#define CCIO_FREE_MAPPINGS(ioc, res_idx, mask, size) \
+        u##size *res_ptr = (u##size *)&((ioc)->res_map[res_idx]); \
+        BUG_ON((*res_ptr & mask) != mask); \
+        *res_ptr &= ~(mask);
+
+/**
+ * ccio_free_range - Free pages from the ioc's resource map.
+ * @ioc: The I/O Controller.
+ * @iova: The I/O Virtual Address.
+ * @pages_mapped: The requested number of pages to be freed from the
+ * I/O Pdir.
+ *
+ * This function frees the resouces allocated for the iova.
+ */
+static void
+ccio_free_range(struct ioc *ioc, dma_addr_t iova, unsigned long pages_mapped)
+{
+	unsigned long iovp = CCIO_IOVP(iova);
+	unsigned int res_idx = PDIR_INDEX(iovp) >> 3;
+
+	BUG_ON(pages_mapped == 0);
+	BUG_ON((pages_mapped * IOVP_SIZE) > DMA_CHUNK_SIZE);
+	BUG_ON(pages_mapped > BITS_PER_LONG);
+
+	DBG_RES("%s():  res_idx: %d pages_mapped %d\n", 
+		__FUNCTION__, res_idx, pages_mapped);
+
+#ifdef CCIO_MAP_STATS
+	ioc->used_pages -= pages_mapped;
+#endif
+
+	if(pages_mapped <= 8) {
+#if 0
+		/* see matching comments in alloc_range */
+		unsigned long mask = ~(~0UL >> pages_mapped);
+		CCIO_FREE_MAPPINGS(ioc, res_idx, mask, 8);
+#else
+		CCIO_FREE_MAPPINGS(ioc, res_idx, 0xff, 8);
+#endif
+	} else if(pages_mapped <= 16) {
+		CCIO_FREE_MAPPINGS(ioc, res_idx, 0xffff, 16);
+	} else if(pages_mapped <= 32) {
+		CCIO_FREE_MAPPINGS(ioc, res_idx, ~(unsigned int)0, 32);
+#ifdef __LP64__
+	} else if(pages_mapped <= 64) {
+		CCIO_FREE_MAPPINGS(ioc, res_idx, ~0UL, 64);
+#endif
+	} else {
+		panic("%s:%s() Too many pages to unmap.\n", __FILE__,
+		      __FUNCTION__);
+	}
+}
+
+/****************************************************************
+**
+**          CCIO dma_ops support routines
+**
+*****************************************************************/
+
+typedef unsigned long space_t;
+#define KERNEL_SPACE 0
+
+/*
+** DMA "Page Type" and Hints 
+** o if SAFE_DMA isn't set, mapping is for FAST_DMA. SAFE_DMA should be
+**   set for subcacheline DMA transfers since we don't want to damage the
+**   other part of a cacheline.
+** o SAFE_DMA must be set for "memory" allocated via pci_alloc_consistent().
+**   This bit tells U2 to do R/M/W for partial cachelines. "Streaming"
+**   data can avoid this if the mapping covers full cache lines.
+** o STOP_MOST is needed for atomicity across cachelines.
+**   Apperently only "some EISA devices" need this.
+**   Using CONFIG_ISA is hack. Only the IOA with EISA under it needs
+**   to use this hint iff the EISA devices needs this feature.
+**   According to the U2 ERS, STOP_MOST enabled pages hurt performance.
+** o PREFETCH should *not* be set for cases like Multiple PCI devices
+**   behind GSCtoPCI (dino) bus converter. Only one cacheline per GSC
+**   device can be fetched and multiply DMA streams will thrash the
+**   prefetch buffer and burn memory bandwidth. See 6.7.3 "Prefetch Rules
+**   and Invalidation of Prefetch Entries".
+**
+** FIXME: the default hints need to be per GSC device - not global.
+** 
+** HP-UX dorks: linux device driver programming model is totally different
+**    than HP-UX's. HP-UX always sets HINT_PREFETCH since it's drivers
+**    do special things to work on non-coherent platforms...linux has to
+**    be much more careful with this.
+*/
+#define IOPDIR_VALID    0x01UL
+#define HINT_SAFE_DMA   0x02UL	/* used for pci_alloc_consistent() pages */
+#ifdef CONFIG_EISA
+#define HINT_STOP_MOST  0x04UL	/* LSL support */
+#else
+#define HINT_STOP_MOST  0x00UL	/* only needed for "some EISA devices" */
+#endif
+#define HINT_UDPATE_ENB 0x08UL  /* not used/supported by U2 */
+#define HINT_PREFETCH   0x10UL	/* for outbound pages which are not SAFE */
+
+
+/*
+** Use direction (ie PCI_DMA_TODEVICE) to pick hint.
+** ccio_alloc_consistent() depends on this to get SAFE_DMA
+** when it passes in BIDIRECTIONAL flag.
+*/
+static u32 hint_lookup[] = {
+	[PCI_DMA_BIDIRECTIONAL]	= HINT_STOP_MOST | HINT_SAFE_DMA | IOPDIR_VALID,
+	[PCI_DMA_TODEVICE]	= HINT_STOP_MOST | HINT_PREFETCH | IOPDIR_VALID,
+	[PCI_DMA_FROMDEVICE]	= HINT_STOP_MOST | IOPDIR_VALID,
+};
+
+/**
+ * ccio_io_pdir_entry - Initialize an I/O Pdir.
+ * @pdir_ptr: A pointer into I/O Pdir.
+ * @sid: The Space Identifier.
+ * @vba: The virtual address.
+ * @hints: The DMA Hint.
+ *
+ * Given a virtual address (vba, arg2) and space id, (sid, arg1),
+ * load the I/O PDIR entry pointed to by pdir_ptr (arg0). Each IO Pdir
+ * entry consists of 8 bytes as shown below (MSB == bit 0):
+ *
+ *
+ * WORD 0:
+ * +------+----------------+-----------------------------------------------+
+ * | Phys | Virtual Index  |               Phys                            |
+ * | 0:3  |     0:11       |               4:19                            |
+ * |4 bits|   12 bits      |              16 bits                          |
+ * +------+----------------+-----------------------------------------------+
+ * WORD 1:
+ * +-----------------------+-----------------------------------------------+
+ * |      Phys    |  Rsvd  | Prefetch |Update |Rsvd  |Lock  |Safe  |Valid  |
+ * |     20:39    |        | Enable   |Enable |      |Enable|DMA   |       |
+ * |    20 bits   | 5 bits | 1 bit    |1 bit  |2 bits|1 bit |1 bit |1 bit  |
+ * +-----------------------+-----------------------------------------------+
+ *
+ * The virtual index field is filled with the results of the LCI
+ * (Load Coherence Index) instruction.  The 8 bits used for the virtual
+ * index are bits 12:19 of the value returned by LCI.
+ */ 
+void CCIO_INLINE
+ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
+		   unsigned long hints)
+{
+	register unsigned long pa;
+	register unsigned long ci; /* coherent index */
+
+	/* We currently only support kernel addresses */
+	BUG_ON(sid != KERNEL_SPACE);
+
+	mtsp(sid,1);
+
+	/*
+	** WORD 1 - low order word
+	** "hints" parm includes the VALID bit!
+	** "dep" clobbers the physical address offset bits as well.
+	*/
+	pa = virt_to_phys(vba);
+	asm volatile("depw  %1,31,12,%0" : "+r" (pa) : "r" (hints));
+	((u32 *)pdir_ptr)[1] = (u32) pa;
+
+	/*
+	** WORD 0 - high order word
+	*/
+
+#ifdef __LP64__
+	/*
+	** get bits 12:15 of physical address
+	** shift bits 16:31 of physical address
+	** and deposit them
+	*/
+	asm volatile ("extrd,u %1,15,4,%0" : "=r" (ci) : "r" (pa));
+	asm volatile ("extrd,u %1,31,16,%0" : "+r" (pa) : "r" (pa));
+	asm volatile ("depd  %1,35,4,%0" : "+r" (pa) : "r" (ci));
+#else
+	pa = 0;
+#endif
+	/*
+	** get CPU coherency index bits
+	** Grab virtual index [0:11]
+	** Deposit virt_idx bits into I/O PDIR word
+	*/
+	asm volatile ("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
+	asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci));
+	asm volatile ("depw  %1,15,12,%0" : "+r" (pa) : "r" (ci));
+
+	((u32 *)pdir_ptr)[0] = (u32) pa;
+
+
+	/* FIXME: PCX_W platforms don't need FDC/SYNC. (eg C360)
+	**        PCX-U/U+ do. (eg C200/C240)
+	**        PCX-T'? Don't know. (eg C110 or similar K-class)
+	**
+	** See PDC_MODEL/option 0/SW_CAP word for "Non-coherent IO-PDIR bit".
+	** Hopefully we can patch (NOP) these out at boot time somehow.
+	**
+	** "Since PCX-U employs an offset hash that is incompatible with
+	** the real mode coherence index generation of U2, the PDIR entry
+	** must be flushed to memory to retain coherence."
+	*/
+	asm volatile("fdc 0(%0)" : : "r" (pdir_ptr));
+	asm volatile("sync");
+}
+
+/**
+ * ccio_clear_io_tlb - Remove stale entries from the I/O TLB.
+ * @ioc: The I/O Controller.
+ * @iovp: The I/O Virtual Page.
+ * @byte_cnt: The requested number of bytes to be freed from the I/O Pdir.
+ *
+ * Purge invalid I/O PDIR entries from the I/O TLB.
+ *
+ * FIXME: Can we change the byte_cnt to pages_mapped?
+ */
+static CCIO_INLINE void
+ccio_clear_io_tlb(struct ioc *ioc, dma_addr_t iovp, size_t byte_cnt)
+{
+	u32 chain_size = 1 << ioc->chainid_shift;
+
+	iovp &= IOVP_MASK;	/* clear offset bits, just want pagenum */
+	byte_cnt += chain_size;
+
+	while(byte_cnt > chain_size) {
+		WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_hpa->io_command);
+		iovp += chain_size;
+		byte_cnt -= chain_size;
+	}
+}
+
+/**
+ * ccio_mark_invalid - Mark the I/O Pdir entries invalid.
+ * @ioc: The I/O Controller.
+ * @iova: The I/O Virtual Address.
+ * @byte_cnt: The requested number of bytes to be freed from the I/O Pdir.
+ *
+ * Mark the I/O Pdir entries invalid and blow away the corresponding I/O
+ * TLB entries.
+ *
+ * FIXME: at some threshhold it might be "cheaper" to just blow
+ *        away the entire I/O TLB instead of individual entries.
+ *
+ * FIXME: Uturn has 256 TLB entries. We don't need to purge every
+ *        PDIR entry - just once for each possible TLB entry.
+ *        (We do need to maker I/O PDIR entries invalid regardless).
+ *
+ * FIXME: Can we change byte_cnt to pages_mapped?
+ */ 
+static CCIO_INLINE void
+ccio_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
+{
+	u32 iovp = (u32)CCIO_IOVP(iova);
+	size_t saved_byte_cnt;
+
+	/* round up to nearest page size */
+	saved_byte_cnt = byte_cnt = ROUNDUP(byte_cnt, IOVP_SIZE);
+
+	while(byte_cnt > 0) {
+		/* invalidate one page at a time */
+		unsigned int idx = PDIR_INDEX(iovp);
+		char *pdir_ptr = (char *) &(ioc->pdir_base[idx]);
+
+		BUG_ON(idx >= (ioc->pdir_size / sizeof(u64)));
+		pdir_ptr[7] = 0;	/* clear only VALID bit */ 
+		/*
+		** FIXME: PCX_W platforms don't need FDC/SYNC. (eg C360)
+		**   PCX-U/U+ do. (eg C200/C240)
+		** See PDC_MODEL/option 0/SW_CAP for "Non-coherent IO-PDIR bit".
+		**
+		** Hopefully someone figures out how to patch (NOP) the
+		** FDC/SYNC out at boot time.
+		*/
+		asm volatile("fdc 0(%0)" : : "r" (pdir_ptr[7]));
+
+		iovp     += IOVP_SIZE;
+		byte_cnt -= IOVP_SIZE;
+	}
+
+	asm volatile("sync");
+	ccio_clear_io_tlb(ioc, CCIO_IOVP(iova), saved_byte_cnt);
+}
+
+/****************************************************************
+**
+**          CCIO dma_ops
+**
+*****************************************************************/
+
+/**
+ * ccio_dma_supported - Verify the IOMMU supports the DMA address range.
+ * @dev: The PCI device.
+ * @mask: A bit mask describing the DMA address range of the device.
+ *
+ * This function implements the pci_dma_supported function.
+ */
+static int 
+ccio_dma_supported(struct device *dev, u64 mask)
+{
+	if(dev == NULL) {
+		printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
+		BUG();
+		return 0;
+	}
+
+	/* only support 32-bit devices (ie PCI/GSC) */
+	return (int)(mask == 0xffffffffUL);
+}
+
+/**
+ * ccio_map_single - Map an address range into the IOMMU.
+ * @dev: The PCI device.
+ * @addr: The start address of the DMA region.
+ * @size: The length of the DMA region.
+ * @direction: The direction of the DMA transaction (to/from device).
+ *
+ * This function implements the pci_map_single function.
+ */
+static dma_addr_t 
+ccio_map_single(struct device *dev, void *addr, size_t size,
+		enum dma_data_direction direction)
+{
+	int idx;
+	struct ioc *ioc;
+	unsigned long flags;
+	dma_addr_t iovp;
+	dma_addr_t offset;
+	u64 *pdir_start;
+	unsigned long hint = hint_lookup[(int)direction];
+
+	BUG_ON(!dev);
+	ioc = GET_IOC(dev);
+
+	BUG_ON(size <= 0);
+
+	/* save offset bits */
+	offset = ((unsigned long) addr) & ~IOVP_MASK;
+
+	/* round up to nearest IOVP_SIZE */
+	size = ROUNDUP(size + offset, IOVP_SIZE);
+	spin_lock_irqsave(&ioc->res_lock, flags);
+
+#ifdef CCIO_MAP_STATS
+	ioc->msingle_calls++;
+	ioc->msingle_pages += size >> IOVP_SHIFT;
+#endif
+
+	idx = ccio_alloc_range(ioc, size);
+	iovp = (dma_addr_t)MKIOVP(idx);
+
+	pdir_start = &(ioc->pdir_base[idx]);
+
+	DBG_RUN("%s() 0x%p -> 0x%lx size: %0x%x\n",
+		__FUNCTION__, addr, (long)iovp | offset, size);
+
+	/* If not cacheline aligned, force SAFE_DMA on the whole mess */
+	if((size % L1_CACHE_BYTES) || ((unsigned long)addr % L1_CACHE_BYTES))
+		hint |= HINT_SAFE_DMA;
+
+	while(size > 0) {
+		ccio_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long)addr, hint);
+
+		DBG_RUN(" pdir %p %08x%08x\n",
+			pdir_start,
+			(u32) (((u32 *) pdir_start)[0]),
+			(u32) (((u32 *) pdir_start)[1]));
+		++pdir_start;
+		addr += IOVP_SIZE;
+		size -= IOVP_SIZE;
+	}
+
+	spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+	/* form complete address */
+	return CCIO_IOVA(iovp, offset);
+}
+
+/**
+ * ccio_unmap_single - Unmap an address range from the IOMMU.
+ * @dev: The PCI device.
+ * @addr: The start address of the DMA region.
+ * @size: The length of the DMA region.
+ * @direction: The direction of the DMA transaction (to/from device).
+ *
+ * This function implements the pci_unmap_single function.
+ */
+static void 
+ccio_unmap_single(struct device *dev, dma_addr_t iova, size_t size, 
+		  enum dma_data_direction direction)
+{
+	struct ioc *ioc;
+	unsigned long flags; 
+	dma_addr_t offset = iova & ~IOVP_MASK;
+	
+	BUG_ON(!dev);
+	ioc = GET_IOC(dev);
+
+	DBG_RUN("%s() iovp 0x%lx/%x\n",
+		__FUNCTION__, (long)iova, size);
+
+	iova ^= offset;        /* clear offset bits */
+	size += offset;
+	size = ROUNDUP(size, IOVP_SIZE);
+
+	spin_lock_irqsave(&ioc->res_lock, flags);
+
+#ifdef CCIO_MAP_STATS
+	ioc->usingle_calls++;
+	ioc->usingle_pages += size >> IOVP_SHIFT;
+#endif
+
+	ccio_mark_invalid(ioc, iova, size);
+	ccio_free_range(ioc, iova, (size >> IOVP_SHIFT));
+	spin_unlock_irqrestore(&ioc->res_lock, flags);
+}
+
+/**
+ * ccio_alloc_consistent - Allocate a consistent DMA mapping.
+ * @dev: The PCI device.
+ * @size: The length of the DMA region.
+ * @dma_handle: The DMA address handed back to the device (not the cpu).
+ *
+ * This function implements the pci_alloc_consistent function.
+ */
+static void * 
+ccio_alloc_consistent(struct device *dev, size_t size, dma_addr_t *dma_handle, int flag)
+{
+      void *ret;
+#if 0
+/* GRANT Need to establish hierarchy for non-PCI devs as well
+** and then provide matching gsc_map_xxx() functions for them as well.
+*/
+	if(!hwdev) {
+		/* only support PCI */
+		*dma_handle = 0;
+		return 0;
+	}
+#endif
+        ret = (void *) __get_free_pages(flag, get_order(size));
+
+	if (ret) {
+		memset(ret, 0, size);
+		*dma_handle = ccio_map_single(dev, ret, size, PCI_DMA_BIDIRECTIONAL);
+	}
+
+	return ret;
+}
+
+/**
+ * ccio_free_consistent - Free a consistent DMA mapping.
+ * @dev: The PCI device.
+ * @size: The length of the DMA region.
+ * @cpu_addr: The cpu address returned from the ccio_alloc_consistent.
+ * @dma_handle: The device address returned from the ccio_alloc_consistent.
+ *
+ * This function implements the pci_free_consistent function.
+ */
+static void 
+ccio_free_consistent(struct device *dev, size_t size, void *cpu_addr, 
+		     dma_addr_t dma_handle)
+{
+	ccio_unmap_single(dev, dma_handle, size, 0);
+	free_pages((unsigned long)cpu_addr, get_order(size));
+}
+
+/*
+** Since 0 is a valid pdir_base index value, can't use that
+** to determine if a value is valid or not. Use a flag to indicate
+** the SG list entry contains a valid pdir index.
+*/
+#define PIDE_FLAG 0x80000000UL
+
+#ifdef CCIO_MAP_STATS
+#define IOMMU_MAP_STATS
+#endif
+#include "iommu-helpers.h"
+
+/**
+ * ccio_map_sg - Map the scatter/gather list into the IOMMU.
+ * @dev: The PCI device.
+ * @sglist: The scatter/gather list to be mapped in the IOMMU.
+ * @nents: The number of entries in the scatter/gather list.
+ * @direction: The direction of the DMA transaction (to/from device).
+ *
+ * This function implements the pci_map_sg function.
+ */
+static int
+ccio_map_sg(struct device *dev, struct scatterlist *sglist, int nents, 
+	    enum dma_data_direction direction)
+{
+	struct ioc *ioc;
+	int coalesced, filled = 0;
+	unsigned long flags;
+	unsigned long hint = hint_lookup[(int)direction];
+	unsigned long prev_len = 0, current_len = 0;
+	int i;
+	
+	BUG_ON(!dev);
+	ioc = GET_IOC(dev);
+	
+	DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+
+	/* Fast path single entry scatterlists. */
+	if (nents == 1) {
+		sg_dma_address(sglist) = ccio_map_single(dev,
+				(void *)sg_virt_addr(sglist), sglist->length,
+				direction);
+		sg_dma_len(sglist) = sglist->length;
+		return 1;
+	}
+
+	for(i = 0; i < nents; i++)
+		prev_len += sglist[i].length;
+	
+	spin_lock_irqsave(&ioc->res_lock, flags);
+
+#ifdef CCIO_MAP_STATS
+	ioc->msg_calls++;
+#endif
+
+	/*
+	** First coalesce the chunks and allocate I/O pdir space
+	**
+	** If this is one DMA stream, we can properly map using the
+	** correct virtual address associated with each DMA page.
+	** w/o this association, we wouldn't have coherent DMA!
+	** Access to the virtual address is what forces a two pass algorithm.
+	*/
+	coalesced = iommu_coalesce_chunks(ioc, sglist, nents, ccio_alloc_range);
+
+	/*
+	** Program the I/O Pdir
+	**
+	** map the virtual addresses to the I/O Pdir
+	** o dma_address will contain the pdir index
+	** o dma_len will contain the number of bytes to map 
+	** o page/offset contain the virtual address.
+	*/
+	filled = iommu_fill_pdir(ioc, sglist, nents, hint, ccio_io_pdir_entry);
+
+	spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+	BUG_ON(coalesced != filled);
+
+	DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+
+	for (i = 0; i < filled; i++)
+		current_len += sg_dma_len(sglist + i);
+
+	BUG_ON(current_len != prev_len);
+
+	return filled;
+}
+
+/**
+ * ccio_unmap_sg - Unmap the scatter/gather list from the IOMMU.
+ * @dev: The PCI device.
+ * @sglist: The scatter/gather list to be unmapped from the IOMMU.
+ * @nents: The number of entries in the scatter/gather list.
+ * @direction: The direction of the DMA transaction (to/from device).
+ *
+ * This function implements the pci_unmap_sg function.
+ */
+static void 
+ccio_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, 
+	      enum dma_data_direction direction)
+{
+	struct ioc *ioc;
+
+	BUG_ON(!dev);
+	ioc = GET_IOC(dev);
+
+	DBG_RUN_SG("%s() START %d entries,  %08lx,%x\n",
+		__FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);
+
+#ifdef CCIO_MAP_STATS
+	ioc->usg_calls++;
+#endif
+
+	while(sg_dma_len(sglist) && nents--) {
+
+#ifdef CCIO_MAP_STATS
+		ioc->usg_pages += sg_dma_len(sglist) >> PAGE_SHIFT;
+#endif
+		ccio_unmap_single(dev, sg_dma_address(sglist),
+				  sg_dma_len(sglist), direction);
+		++sglist;
+	}
+
+	DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
+}
+
+static struct hppa_dma_ops ccio_ops = {
+	.dma_supported =	ccio_dma_supported,
+	.alloc_consistent =	ccio_alloc_consistent,
+	.alloc_noncoherent =	ccio_alloc_consistent,
+	.free_consistent =	ccio_free_consistent,
+	.map_single =		ccio_map_single,
+	.unmap_single =		ccio_unmap_single,
+	.map_sg = 		ccio_map_sg,
+	.unmap_sg = 		ccio_unmap_sg,
+	.dma_sync_single_for_cpu =	NULL,	/* NOP for U2/Uturn */
+	.dma_sync_single_for_device =	NULL,	/* NOP for U2/Uturn */
+	.dma_sync_sg_for_cpu =		NULL,	/* ditto */
+	.dma_sync_sg_for_device =		NULL,	/* ditto */
+};
+
+#ifdef CONFIG_PROC_FS
+static int proc_append(char *src, int len, char **dst, off_t *offset, int *max)
+{
+	if (len < *offset) {
+		*offset -= len;
+		return 0;
+	}
+	if (*offset > 0) {
+		src += *offset;
+		len -= *offset;
+		*offset = 0;
+	}
+	if (len > *max) {
+		len = *max;
+	}
+	memcpy(*dst, src, len);
+	*dst += len;
+	*max -= len;
+	return (*max == 0);
+}
+
+static int ccio_proc_info(char *buf, char **start, off_t offset, int count,
+			  int *eof, void *data)
+{
+	int max = count;
+	char tmp[80]; /* width of an ANSI-standard terminal */
+	struct ioc *ioc = ioc_list;
+
+	while (ioc != NULL) {
+		unsigned int total_pages = ioc->res_size << 3;
+		unsigned long avg = 0, min, max;
+		int j, len;
+
+		len = sprintf(tmp, "%s\n", ioc->name);
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+		
+		len = sprintf(tmp, "Cujo 2.0 bug    : %s\n",
+			      (ioc->cujo20_bug ? "yes" : "no"));
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+		
+		len = sprintf(tmp, "IO PDIR size    : %d bytes (%d entries)\n",
+			      total_pages * 8, total_pages);
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+#ifdef CCIO_MAP_STATS
+		len = sprintf(tmp, "IO PDIR entries : %ld free  %ld used (%d%%)\n",
+			      total_pages - ioc->used_pages, ioc->used_pages,
+			      (int)(ioc->used_pages * 100 / total_pages));
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+#endif
+		len = sprintf(tmp, "Resource bitmap : %d bytes (%d pages)\n", 
+			ioc->res_size, total_pages);
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+#ifdef CCIO_SEARCH_TIME
+		min = max = ioc->avg_search[0];
+		for(j = 0; j < CCIO_SEARCH_SAMPLE; ++j) {
+			avg += ioc->avg_search[j];
+			if(ioc->avg_search[j] > max) 
+				max = ioc->avg_search[j];
+			if(ioc->avg_search[j] < min) 
+				min = ioc->avg_search[j];
+		}
+		avg /= CCIO_SEARCH_SAMPLE;
+		len = sprintf(tmp, "  Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
+			      min, avg, max);
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+#endif
+#ifdef CCIO_MAP_STATS
+		len = sprintf(tmp, "pci_map_single(): %8ld calls  %8ld pages (avg %d/1000)\n",
+			      ioc->msingle_calls, ioc->msingle_pages,
+			      (int)((ioc->msingle_pages * 1000)/ioc->msingle_calls));
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+		
+
+		/* KLUGE - unmap_sg calls unmap_single for each mapped page */
+		min = ioc->usingle_calls - ioc->usg_calls;
+		max = ioc->usingle_pages - ioc->usg_pages;
+		len = sprintf(tmp, "pci_unmap_single: %8ld calls  %8ld pages (avg %d/1000)\n",
+			      min, max, (int)((max * 1000)/min));
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+ 
+		len = sprintf(tmp, "pci_map_sg()    : %8ld calls  %8ld pages (avg %d/1000)\n",
+			      ioc->msg_calls, ioc->msg_pages,
+			      (int)((ioc->msg_pages * 1000)/ioc->msg_calls));
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+		len = sprintf(tmp, "pci_unmap_sg()  : %8ld calls  %8ld pages (avg %d/1000)\n\n\n",
+			      ioc->usg_calls, ioc->usg_pages,
+			      (int)((ioc->usg_pages * 1000)/ioc->usg_calls));
+		if (proc_append(tmp, len, &buf, &offset, &count))
+			break;
+#endif	/* CCIO_MAP_STATS */
+		ioc = ioc->next;
+	}
+
+	if (count == 0) {
+		*eof = 1;
+	}
+	return (max - count);
+}
+
+static int ccio_resource_map(char *buf, char **start, off_t offset, int len,
+			     int *eof, void *data)
+{
+	struct ioc *ioc = ioc_list;
+
+	buf[0] = '\0';
+	while (ioc != NULL) {
+		u32 *res_ptr = (u32 *)ioc->res_map;
+		int j;
+
+		for (j = 0; j < (ioc->res_size / sizeof(u32)); j++) {
+			if ((j & 7) == 0)
+				strcat(buf,"\n   ");
+			sprintf(buf, "%s %08x", buf, *res_ptr);
+			res_ptr++;
+		}
+		strcat(buf, "\n\n");
+		ioc = ioc->next;
+		break; /* XXX - remove me */
+	}
+
+	return strlen(buf);
+}
+#endif
+
+/**
+ * ccio_find_ioc - Find the ioc in the ioc_list
+ * @hw_path: The hardware path of the ioc.
+ *
+ * This function searches the ioc_list for an ioc that matches
+ * the provide hardware path.
+ */
+static struct ioc * ccio_find_ioc(int hw_path)
+{
+	int i;
+	struct ioc *ioc;
+
+	ioc = ioc_list;
+	for (i = 0; i < ioc_count; i++) {
+		if (ioc->hw_path == hw_path)
+			return ioc;
+
+		ioc = ioc->next;
+	}
+
+	return NULL;
+}
+
+/**
+ * ccio_get_iommu - Find the iommu which controls this device
+ * @dev: The parisc device.
+ *
+ * This function searches through the registered IOMMU's and returns
+ * the appropriate IOMMU for the device based on its hardware path.
+ */
+void * ccio_get_iommu(const struct parisc_device *dev)
+{
+	dev = find_pa_parent_type(dev, HPHW_IOA);
+	if (!dev)
+		return NULL;
+
+	return ccio_find_ioc(dev->hw_path);
+}
+
+#define CUJO_20_STEP       0x10000000	/* inc upper nibble */
+
+/* Cujo 2.0 has a bug which will silently corrupt data being transferred
+ * to/from certain pages.  To avoid this happening, we mark these pages
+ * as `used', and ensure that nothing will try to allocate from them.
+ */
+void ccio_cujo20_fixup(struct parisc_device *cujo, u32 iovp)
+{
+	unsigned int idx;
+	struct parisc_device *dev = parisc_parent(cujo);
+	struct ioc *ioc = ccio_get_iommu(dev);
+	u8 *res_ptr;
+
+	ioc->cujo20_bug = 1;
+	res_ptr = ioc->res_map;
+	idx = PDIR_INDEX(iovp) >> 3;
+
+	while (idx < ioc->res_size) {
+ 		res_ptr[idx] |= 0xff;
+		idx += PDIR_INDEX(CUJO_20_STEP) >> 3;
+	}
+}
+
+#if 0
+/* GRANT -  is this needed for U2 or not? */
+
+/*
+** Get the size of the I/O TLB for this I/O MMU.
+**
+** If spa_shift is non-zero (ie probably U2),
+** then calculate the I/O TLB size using spa_shift.
+**
+** Otherwise we are supposed to get the IODC entry point ENTRY TLB
+** and execute it. However, both U2 and Uturn firmware supplies spa_shift.
+** I think only Java (K/D/R-class too?) systems don't do this.
+*/
+static int
+ccio_get_iotlb_size(struct parisc_device *dev)
+{
+	if (dev->spa_shift == 0) {
+		panic("%s() : Can't determine I/O TLB size.\n", __FUNCTION__);
+	}
+	return (1 << dev->spa_shift);
+}
+#else
+
+/* Uturn supports 256 TLB entries */
+#define CCIO_CHAINID_SHIFT	8
+#define CCIO_CHAINID_MASK	0xff
+#endif /* 0 */
+
+/* We *can't* support JAVA (T600). Venture there at your own risk. */
+static struct parisc_device_id ccio_tbl[] = {
+	{ HPHW_IOA, HVERSION_REV_ANY_ID, U2_IOA_RUNWAY, 0xb }, /* U2 */
+	{ HPHW_IOA, HVERSION_REV_ANY_ID, UTURN_IOA_RUNWAY, 0xb }, /* UTurn */
+	{ 0, }
+};
+
+static int ccio_probe(struct parisc_device *dev);
+
+static struct parisc_driver ccio_driver = {
+	.name =		"U2:Uturn",
+	.id_table =	ccio_tbl,
+	.probe =	ccio_probe,
+};
+
+/**
+ * ccio_ioc_init - Initalize the I/O Controller
+ * @ioc: The I/O Controller.
+ *
+ * Initalize the I/O Controller which includes setting up the
+ * I/O Page Directory, the resource map, and initalizing the
+ * U2/Uturn chip into virtual mode.
+ */
+static void
+ccio_ioc_init(struct ioc *ioc)
+{
+	int i;
+	unsigned int iov_order;
+	u32 iova_space_size;
+
+	/*
+	** Determine IOVA Space size from memory size.
+	**
+	** Ideally, PCI drivers would register the maximum number
+	** of DMA they can have outstanding for each device they
+	** own.  Next best thing would be to guess how much DMA
+	** can be outstanding based on PCI Class/sub-class. Both
+	** methods still require some "extra" to support PCI
+	** Hot-Plug/Removal of PCI cards. (aka PCI OLARD).
+	*/
+
+	iova_space_size = (u32) (num_physpages / count_parisc_driver(&ccio_driver));
+
+	/* limit IOVA space size to 1MB-1GB */
+
+	if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
+		iova_space_size =  1 << (20 - PAGE_SHIFT);
+#ifdef __LP64__
+	} else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
+		iova_space_size =  1 << (30 - PAGE_SHIFT);
+#endif
+	}
+
+	/*
+	** iova space must be log2() in size.
+	** thus, pdir/res_map will also be log2().
+	*/
+
+	/* We could use larger page sizes in order to *decrease* the number
+	** of mappings needed.  (ie 8k pages means 1/2 the mappings).
+	**
+	** Note: Grant Grunder says "Using 8k I/O pages isn't trivial either
+	**   since the pages must also be physically contiguous - typically
+	**   this is the case under linux."
+	*/
+
+	iov_order = get_order(iova_space_size << PAGE_SHIFT);
+
+	/* iova_space_size is now bytes, not pages */
+	iova_space_size = 1 << (iov_order + PAGE_SHIFT);
+
+	ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
+
+	BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024);   /* max pdir size < 4MB */
+
+	/* Verify it's a power of two */
+	BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT));
+
+	DBG_INIT("%s() hpa 0x%lx mem %luMB IOV %dMB (%d bits)\n",
+			__FUNCTION__,
+			ioc->ioc_hpa,
+			(unsigned long) num_physpages >> (20 - PAGE_SHIFT),
+			iova_space_size>>20,
+			iov_order + PAGE_SHIFT);
+
+	ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL, 
+						 get_order(ioc->pdir_size));
+	if(NULL == ioc->pdir_base) {
+		panic("%s:%s() could not allocate I/O Page Table\n", __FILE__,
+		      __FUNCTION__);
+	}
+	memset(ioc->pdir_base, 0, ioc->pdir_size);
+
+	BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base);
+	DBG_INIT(" base %p", ioc->pdir_base);
+
+	/* resource map size dictated by pdir_size */
+ 	ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3;
+	DBG_INIT("%s() res_size 0x%x\n", __FUNCTION__, ioc->res_size);
+	
+	ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL, 
+					      get_order(ioc->res_size));
+	if(NULL == ioc->res_map) {
+		panic("%s:%s() could not allocate resource map\n", __FILE__,
+		      __FUNCTION__);
+	}
+	memset(ioc->res_map, 0, ioc->res_size);
+
+	/* Initialize the res_hint to 16 */
+	ioc->res_hint = 16;
+
+	/* Initialize the spinlock */
+	spin_lock_init(&ioc->res_lock);
+
+	/*
+	** Chainid is the upper most bits of an IOVP used to determine
+	** which TLB entry an IOVP will use.
+	*/
+	ioc->chainid_shift = get_order(iova_space_size) + PAGE_SHIFT - CCIO_CHAINID_SHIFT;
+	DBG_INIT(" chainid_shift 0x%x\n", ioc->chainid_shift);
+
+	/*
+	** Initialize IOA hardware
+	*/
+	WRITE_U32(CCIO_CHAINID_MASK << ioc->chainid_shift, 
+		  &ioc->ioc_hpa->io_chain_id_mask);
+
+	WRITE_U32(virt_to_phys(ioc->pdir_base), 
+		  &ioc->ioc_hpa->io_pdir_base);
+
+	/*
+	** Go to "Virtual Mode"
+	*/
+	WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_hpa->io_control);
+
+	/*
+	** Initialize all I/O TLB entries to 0 (Valid bit off).
+	*/
+	WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_m);
+	WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_l);
+
+	for(i = 1 << CCIO_CHAINID_SHIFT; i ; i--) {
+		WRITE_U32((CMD_TLB_DIRECT_WRITE | (i << ioc->chainid_shift)),
+			  &ioc->ioc_hpa->io_command);
+	}
+}
+
+static void
+ccio_init_resource(struct resource *res, char *name, unsigned long ioaddr)
+{
+	int result;
+
+	res->parent = NULL;
+	res->flags = IORESOURCE_MEM;
+	res->start = (unsigned long)(signed) __raw_readl(ioaddr) << 16;
+	res->end = (unsigned long)(signed) (__raw_readl(ioaddr + 4) << 16) - 1;
+	res->name = name;
+	if (res->end + 1 == res->start)
+		return;
+	result = request_resource(&iomem_resource, res);
+	if (result < 0) {
+		printk(KERN_ERR "%s: failed to claim CCIO bus address space (%08lx,%08lx)\n", 
+		       __FILE__, res->start, res->end);
+	}
+}
+
+static void __init ccio_init_resources(struct ioc *ioc)
+{
+	struct resource *res = ioc->mmio_region;
+	char *name = kmalloc(14, GFP_KERNEL);
+
+	sprintf(name, "GSC Bus [%d/]", ioc->hw_path);
+
+	ccio_init_resource(res, name, (unsigned long)&ioc->ioc_hpa->io_io_low);
+	ccio_init_resource(res + 1, name,
+			(unsigned long)&ioc->ioc_hpa->io_io_low_hv);
+}
+
+static int new_ioc_area(struct resource *res, unsigned long size,
+		unsigned long min, unsigned long max, unsigned long align)
+{
+	if (max <= min)
+		return -EBUSY;
+
+	res->start = (max - size + 1) &~ (align - 1);
+	res->end = res->start + size;
+	if (!request_resource(&iomem_resource, res))
+		return 0;
+
+	return new_ioc_area(res, size, min, max - size, align);
+}
+
+static int expand_ioc_area(struct resource *res, unsigned long size,
+		unsigned long min, unsigned long max, unsigned long align)
+{
+	unsigned long start, len;
+
+	if (!res->parent)
+		return new_ioc_area(res, size, min, max, align);
+
+	start = (res->start - size) &~ (align - 1);
+	len = res->end - start + 1;
+	if (start >= min) {
+		if (!adjust_resource(res, start, len))
+			return 0;
+	}
+
+	start = res->start;
+	len = ((size + res->end + align) &~ (align - 1)) - start;
+	if (start + len <= max) {
+		if (!adjust_resource(res, start, len))
+			return 0;
+	}
+
+	return -EBUSY;
+}
+
+/*
+ * Dino calls this function.  Beware that we may get called on systems
+ * which have no IOC (725, B180, C160L, etc) but do have a Dino.
+ * So it's legal to find no parent IOC.
+ *
+ * Some other issues: one of the resources in the ioc may be unassigned.
+ */
+int ccio_allocate_resource(const struct parisc_device *dev,
+		struct resource *res, unsigned long size,
+		unsigned long min, unsigned long max, unsigned long align)
+{
+	struct resource *parent = &iomem_resource;
+	struct ioc *ioc = ccio_get_iommu(dev);
+	if (!ioc)
+		goto out;
+
+	parent = ioc->mmio_region;
+	if (parent->parent &&
+	    !allocate_resource(parent, res, size, min, max, align, NULL, NULL))
+		return 0;
+
+	if ((parent + 1)->parent &&
+	    !allocate_resource(parent + 1, res, size, min, max, align,
+				NULL, NULL))
+		return 0;
+
+	if (!expand_ioc_area(parent, size, min, max, align)) {
+		__raw_writel(((parent->start)>>16) | 0xffff0000,
+			     (unsigned long)&(ioc->ioc_hpa->io_io_low));
+		__raw_writel(((parent->end)>>16) | 0xffff0000,
+			     (unsigned long)&(ioc->ioc_hpa->io_io_high));
+	} else if (!expand_ioc_area(parent + 1, size, min, max, align)) {
+		parent++;
+		__raw_writel(((parent->start)>>16) | 0xffff0000,
+			     (unsigned long)&(ioc->ioc_hpa->io_io_low_hv));
+		__raw_writel(((parent->end)>>16) | 0xffff0000,
+			     (unsigned long)&(ioc->ioc_hpa->io_io_high_hv));
+	} else {
+		return -EBUSY;
+	}
+
+ out:
+	return allocate_resource(parent, res, size, min, max, align, NULL,NULL);
+}
+
+int ccio_request_resource(const struct parisc_device *dev,
+		struct resource *res)
+{
+	struct resource *parent;
+	struct ioc *ioc = ccio_get_iommu(dev);
+
+	if (!ioc) {
+		parent = &iomem_resource;
+	} else if ((ioc->mmio_region->start <= res->start) &&
+			(res->end <= ioc->mmio_region->end)) {
+		parent = ioc->mmio_region;
+	} else if (((ioc->mmio_region + 1)->start <= res->start) &&
+			(res->end <= (ioc->mmio_region + 1)->end)) {
+		parent = ioc->mmio_region + 1;
+	} else {
+		return -EBUSY;
+	}
+
+	return request_resource(parent, res);
+}
+
+/**
+ * ccio_probe - Determine if ccio should claim this device.
+ * @dev: The device which has been found
+ *
+ * Determine if ccio should claim this chip (return 0) or not (return 1).
+ * If so, initialize the chip and tell other partners in crime they
+ * have work to do.
+ */
+static int ccio_probe(struct parisc_device *dev)
+{
+	int i;
+	struct ioc *ioc, **ioc_p = &ioc_list;
+	
+	ioc = kmalloc(sizeof(struct ioc), GFP_KERNEL);
+	if (ioc == NULL) {
+		printk(KERN_ERR MODULE_NAME ": memory allocation failure\n");
+		return 1;
+	}
+	memset(ioc, 0, sizeof(struct ioc));
+
+	ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn";
+
+	printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa);
+
+	for (i = 0; i < ioc_count; i++) {
+		ioc_p = &(*ioc_p)->next;
+	}
+	*ioc_p = ioc;
+
+	ioc->hw_path = dev->hw_path;
+	ioc->ioc_hpa = (struct ioa_registers *)dev->hpa;
+	ccio_ioc_init(ioc);
+	ccio_init_resources(ioc);
+	hppa_dma_ops = &ccio_ops;
+	dev->dev.platform_data = kmalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
+
+	/* if this fails, no I/O cards will work, so may as well bug */
+	BUG_ON(dev->dev.platform_data == NULL);
+	HBA_DATA(dev->dev.platform_data)->iommu = ioc;
+	
+
+	if (ioc_count == 0) {
+		/* FIXME: Create separate entries for each ioc */
+		create_proc_read_entry(MODULE_NAME, S_IRWXU, proc_runway_root,
+				       ccio_proc_info, NULL);
+		create_proc_read_entry(MODULE_NAME"-bitmap", S_IRWXU,
+				       proc_runway_root, ccio_resource_map, NULL);
+	}
+
+	ioc_count++;
+
+	parisc_vmerge_boundary = IOVP_SIZE;
+	parisc_vmerge_max_size = BITS_PER_LONG * IOVP_SIZE;
+	parisc_has_iommu();
+	return 0;
+}
+
+/**
+ * ccio_init - ccio initalization procedure.
+ *
+ * Register this driver.
+ */
+void __init ccio_init(void)
+{
+	register_parisc_driver(&ccio_driver);
+}
+