Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h
new file mode 100644
index 0000000..82a1d97
--- /dev/null
+++ b/drivers/s390/crypto/z90crypt.h
@@ -0,0 +1,258 @@
+/*
+ * linux/drivers/s390/crypto/z90crypt.h
+ *
+ * z90crypt 1.3.2
+ *
+ * Copyright (C) 2001, 2004 IBM Corporation
+ * Author(s): Robert Burroughs (burrough@us.ibm.com)
+ * Eric Rossman (edrossma@us.ibm.com)
+ *
+ * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _Z90CRYPT_H_
+#define _Z90CRYPT_H_
+
+#include <linux/ioctl.h>
+
+#define VERSION_Z90CRYPT_H "$Revision: 1.11 $"
+
+#define z90crypt_VERSION 1
+#define z90crypt_RELEASE 3 // 2 = PCIXCC, 3 = rewrite for coding standards
+#define z90crypt_VARIANT 2 // 2 = added PCIXCC MCL3 and CEX2C support
+
+/**
+ * If we are not using the sparse checker, __user has no use.
+ */
+#ifdef __CHECKER__
+# define __user __attribute__((noderef, address_space(1)))
+#else
+# define __user
+#endif
+
+/**
+ * struct ica_rsa_modexpo
+ *
+ * Requirements:
+ * - outputdatalength is at least as large as inputdatalength.
+ * - All key parts are right justified in their fields, padded on
+ * the left with zeroes.
+ * - length(b_key) = inputdatalength
+ * - length(n_modulus) = inputdatalength
+ */
+struct ica_rsa_modexpo {
+ char __user * inputdata;
+ unsigned int inputdatalength;
+ char __user * outputdata;
+ unsigned int outputdatalength;
+ char __user * b_key;
+ char __user * n_modulus;
+};
+
+/**
+ * struct ica_rsa_modexpo_crt
+ *
+ * Requirements:
+ * - inputdatalength is even.
+ * - outputdatalength is at least as large as inputdatalength.
+ * - All key parts are right justified in their fields, padded on
+ * the left with zeroes.
+ * - length(bp_key) = inputdatalength/2 + 8
+ * - length(bq_key) = inputdatalength/2
+ * - length(np_key) = inputdatalength/2 + 8
+ * - length(nq_key) = inputdatalength/2
+ * - length(u_mult_inv) = inputdatalength/2 + 8
+ */
+struct ica_rsa_modexpo_crt {
+ char __user * inputdata;
+ unsigned int inputdatalength;
+ char __user * outputdata;
+ unsigned int outputdatalength;
+ char __user * bp_key;
+ char __user * bq_key;
+ char __user * np_prime;
+ char __user * nq_prime;
+ char __user * u_mult_inv;
+};
+
+#define Z90_IOCTL_MAGIC 'z' // NOTE: Need to allocate from linux folks
+
+/**
+ * Interface notes:
+ *
+ * The ioctl()s which are implemented (along with relevant details)
+ * are:
+ *
+ * ICARSAMODEXPO
+ * Perform an RSA operation using a Modulus-Exponent pair
+ * This takes an ica_rsa_modexpo struct as its arg.
+ *
+ * NOTE: please refer to the comments preceding this structure
+ * for the implementation details for the contents of the
+ * block
+ *
+ * ICARSACRT
+ * Perform an RSA operation using a Chinese-Remainder Theorem key
+ * This takes an ica_rsa_modexpo_crt struct as its arg.
+ *
+ * NOTE: please refer to the comments preceding this structure
+ * for the implementation details for the contents of the
+ * block
+ *
+ * Z90STAT_TOTALCOUNT
+ * Return an integer count of all device types together.
+ *
+ * Z90STAT_PCICACOUNT
+ * Return an integer count of all PCICAs.
+ *
+ * Z90STAT_PCICCCOUNT
+ * Return an integer count of all PCICCs.
+ *
+ * Z90STAT_PCIXCCMCL2COUNT
+ * Return an integer count of all MCL2 PCIXCCs.
+ *
+ * Z90STAT_PCIXCCMCL3COUNT
+ * Return an integer count of all MCL3 PCIXCCs.
+ *
+ * Z90STAT_CEX2CCOUNT
+ * Return an integer count of all CEX2Cs.
+ *
+ * Z90STAT_REQUESTQ_COUNT
+ * Return an integer count of the number of entries waiting to be
+ * sent to a device.
+ *
+ * Z90STAT_PENDINGQ_COUNT
+ * Return an integer count of the number of entries sent to a
+ * device awaiting the reply.
+ *
+ * Z90STAT_TOTALOPEN_COUNT
+ * Return an integer count of the number of open file handles.
+ *
+ * Z90STAT_DOMAIN_INDEX
+ * Return the integer value of the Cryptographic Domain.
+ *
+ * Z90STAT_STATUS_MASK
+ * Return an 64 element array of unsigned chars for the status of
+ * all devices.
+ * 0x01: PCICA
+ * 0x02: PCICC
+ * 0x03: PCIXCC_MCL2
+ * 0x04: PCIXCC_MCL3
+ * 0x05: CEX2C
+ * 0x0d: device is disabled via the proc filesystem
+ *
+ * Z90STAT_QDEPTH_MASK
+ * Return an 64 element array of unsigned chars for the queue
+ * depth of all devices.
+ *
+ * Z90STAT_PERDEV_REQCNT
+ * Return an 64 element array of unsigned integers for the number
+ * of successfully completed requests per device since the device
+ * was detected and made available.
+ *
+ * ICAZ90STATUS (deprecated)
+ * Return some device driver status in a ica_z90_status struct
+ * This takes an ica_z90_status struct as its arg.
+ *
+ * NOTE: this ioctl() is deprecated, and has been replaced with
+ * single ioctl()s for each type of status being requested
+ *
+ * Z90STAT_PCIXCCCOUNT (deprecated)
+ * Return an integer count of all PCIXCCs (MCL2 + MCL3).
+ * This is DEPRECATED now that MCL3 PCIXCCs are treated differently from
+ * MCL2 PCIXCCs.
+ *
+ * Z90QUIESCE (not recommended)
+ * Quiesce the driver. This is intended to stop all new
+ * requests from being processed. Its use is NOT recommended,
+ * except in circumstances where there is no other way to stop
+ * callers from accessing the driver. Its original use was to
+ * allow the driver to be "drained" of work in preparation for
+ * a system shutdown.
+ *
+ * NOTE: once issued, this ban on new work cannot be undone
+ * except by unloading and reloading the driver.
+ */
+
+/**
+ * Supported ioctl calls
+ */
+#define ICARSAMODEXPO _IOC(_IOC_READ|_IOC_WRITE, Z90_IOCTL_MAGIC, 0x05, 0)
+#define ICARSACRT _IOC(_IOC_READ|_IOC_WRITE, Z90_IOCTL_MAGIC, 0x06, 0)
+
+/* DEPRECATED status calls (bound for removal at some point) */
+#define ICAZ90STATUS _IOR(Z90_IOCTL_MAGIC, 0x10, struct ica_z90_status)
+#define Z90STAT_PCIXCCCOUNT _IOR(Z90_IOCTL_MAGIC, 0x43, int)
+
+/* unrelated to ICA callers */
+#define Z90QUIESCE _IO(Z90_IOCTL_MAGIC, 0x11)
+
+/* New status calls */
+#define Z90STAT_TOTALCOUNT _IOR(Z90_IOCTL_MAGIC, 0x40, int)
+#define Z90STAT_PCICACOUNT _IOR(Z90_IOCTL_MAGIC, 0x41, int)
+#define Z90STAT_PCICCCOUNT _IOR(Z90_IOCTL_MAGIC, 0x42, int)
+#define Z90STAT_PCIXCCMCL2COUNT _IOR(Z90_IOCTL_MAGIC, 0x4b, int)
+#define Z90STAT_PCIXCCMCL3COUNT _IOR(Z90_IOCTL_MAGIC, 0x4c, int)
+#define Z90STAT_CEX2CCOUNT _IOR(Z90_IOCTL_MAGIC, 0x4d, int)
+#define Z90STAT_REQUESTQ_COUNT _IOR(Z90_IOCTL_MAGIC, 0x44, int)
+#define Z90STAT_PENDINGQ_COUNT _IOR(Z90_IOCTL_MAGIC, 0x45, int)
+#define Z90STAT_TOTALOPEN_COUNT _IOR(Z90_IOCTL_MAGIC, 0x46, int)
+#define Z90STAT_DOMAIN_INDEX _IOR(Z90_IOCTL_MAGIC, 0x47, int)
+#define Z90STAT_STATUS_MASK _IOR(Z90_IOCTL_MAGIC, 0x48, char[64])
+#define Z90STAT_QDEPTH_MASK _IOR(Z90_IOCTL_MAGIC, 0x49, char[64])
+#define Z90STAT_PERDEV_REQCNT _IOR(Z90_IOCTL_MAGIC, 0x4a, int[64])
+
+/**
+ * local errno definitions
+ */
+#define ENOBUFF 129 // filp->private_data->...>work_elem_p->buffer is NULL
+#define EWORKPEND 130 // user issues ioctl while another pending
+#define ERELEASED 131 // user released while ioctl pending
+#define EQUIESCE 132 // z90crypt quiescing (no more work allowed)
+#define ETIMEOUT 133 // request timed out
+#define EUNKNOWN 134 // some unrecognized error occured (retry may succeed)
+#define EGETBUFF 135 // Error getting buffer or hardware lacks capability
+ // (retry in software)
+
+/**
+ * DEPRECATED STRUCTURES
+ */
+
+/**
+ * This structure is DEPRECATED and the corresponding ioctl() has been
+ * replaced with individual ioctl()s for each piece of data!
+ * This structure will NOT survive past version 1.3.1, so switch to the
+ * new ioctl()s.
+ */
+#define MASK_LENGTH 64 // mask length
+struct ica_z90_status {
+ int totalcount;
+ int leedslitecount; // PCICA
+ int leeds2count; // PCICC
+ // int PCIXCCCount; is not in struct for backward compatibility
+ int requestqWaitCount;
+ int pendingqWaitCount;
+ int totalOpenCount;
+ int cryptoDomain;
+ // status: 0=not there, 1=PCICA, 2=PCICC, 3=PCIXCC_MCL2, 4=PCIXCC_MCL3,
+ // 5=CEX2C
+ unsigned char status[MASK_LENGTH];
+ // qdepth: # work elements waiting for each device
+ unsigned char qdepth[MASK_LENGTH];
+};
+
+#endif /* _Z90CRYPT_H_ */