diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
new file mode 100644
index 0000000..a3fdead
--- /dev/null
+++ b/drivers/scsi/ibmmca.c
@@ -0,0 +1,2491 @@
+/*
+ Low Level Linux Driver for the IBM Microchannel SCSI Subsystem for
+ Linux Kernel >= 2.4.0.
+ Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU
+ General Public License. Written by Martin Kolinek, December 1995.
+ Further development by: Chris Beauregard, Klaus Kudielka, Michael Lang
+ See the file Documentation/scsi/ibmmca.txt for a detailed description
+ of this driver, the commandline arguments and the history of its
+ development.
+ See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest
+ updates, info and ADF-files for adapters supported by this driver.
+
+ Alan Cox <alan@redhat.com>
+ Updated for Linux 2.5.45 to use the new error handler, cleaned up the
+ lock macros and did a few unavoidable locking tweaks, plus one locking
+ fix in the irq and completion path.
+ 
+ */
+
+#include <linux/config.h>
+#ifndef LINUX_VERSION_CODE
+#include <linux/version.h>
+#endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,45)
+#error "This driver works only with kernel 2.5.45 or higher!"
+#endif
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/mca.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/mca-legacy.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "ibmmca.h"
+
+/* current version of this driver-source: */
+#define IBMMCA_SCSI_DRIVER_VERSION "4.0b-ac"
+
+/* driver configuration */
+#define IM_MAX_HOSTS     8	/* maximum number of host adapters */
+#define IM_RESET_DELAY	60	/* seconds allowed for a reset */
+
+/* driver debugging - #undef all for normal operation */
+/* if defined: count interrupts and ignore this special one: */
+#undef	IM_DEBUG_TIMEOUT	//50
+#define TIMEOUT_PUN	0
+#define TIMEOUT_LUN	0
+/* verbose interrupt: */
+#undef IM_DEBUG_INT
+/* verbose queuecommand: */
+#undef IM_DEBUG_CMD
+/* verbose queucommand for specific SCSI-device type: */
+#undef IM_DEBUG_CMD_SPEC_DEV
+/* verbose device probing */
+#undef IM_DEBUG_PROBE
+
+/* device type that shall be displayed on syslog (only during debugging): */
+#define IM_DEBUG_CMD_DEVICE	TYPE_TAPE
+
+/* relative addresses of hardware registers on a subsystem */
+#define IM_CMD_REG(hi)	(hosts[(hi)]->io_port)	/*Command Interface, (4 bytes long) */
+#define IM_ATTN_REG(hi)	(hosts[(hi)]->io_port+4)	/*Attention (1 byte) */
+#define IM_CTR_REG(hi)	(hosts[(hi)]->io_port+5)	/*Basic Control (1 byte) */
+#define IM_INTR_REG(hi)	(hosts[(hi)]->io_port+6)	/*Interrupt Status (1 byte, r/o) */
+#define IM_STAT_REG(hi)	(hosts[(hi)]->io_port+7)	/*Basic Status (1 byte, read only) */
+
+/* basic I/O-port of first adapter */
+#define IM_IO_PORT	0x3540
+/* maximum number of hosts that can be found */
+#define IM_N_IO_PORT	8
+
+/*requests going into the upper nibble of the Attention register */
+/*note: the lower nibble specifies the device(0-14), or subsystem(15) */
+#define IM_IMM_CMD	0x10	/*immediate command */
+#define IM_SCB		0x30	/*Subsystem Control Block command */
+#define IM_LONG_SCB	0x40	/*long Subsystem Control Block command */
+#define IM_EOI		0xe0	/*end-of-interrupt request */
+
+/*values for bits 7,1,0 of Basic Control reg. (bits 6-2 reserved) */
+#define IM_HW_RESET	0x80	/*hardware reset */
+#define IM_ENABLE_DMA	0x02	/*enable subsystem's busmaster DMA */
+#define IM_ENABLE_INTR	0x01	/*enable interrupts to the system */
+
+/*to interpret the upper nibble of Interrupt Status register */
+/*note: the lower nibble specifies the device(0-14), or subsystem(15) */
+#define IM_SCB_CMD_COMPLETED			0x10
+#define IM_SCB_CMD_COMPLETED_WITH_RETRIES	0x50
+#define IM_LOOP_SCATTER_BUFFER_FULL		0x60
+#define IM_ADAPTER_HW_FAILURE			0x70
+#define IM_IMMEDIATE_CMD_COMPLETED		0xa0
+#define IM_CMD_COMPLETED_WITH_FAILURE		0xc0
+#define IM_CMD_ERROR				0xe0
+#define IM_SOFTWARE_SEQUENCING_ERROR		0xf0
+
+/*to interpret bits 3-0 of Basic Status register (bits 7-4 reserved) */
+#define IM_CMD_REG_FULL		0x08
+#define IM_CMD_REG_EMPTY	0x04
+#define IM_INTR_REQUEST		0x02
+#define IM_BUSY			0x01
+
+/*immediate commands (word written into low 2 bytes of command reg) */
+#define IM_RESET_IMM_CMD	0x0400
+#define IM_FEATURE_CTR_IMM_CMD	0x040c
+#define IM_DMA_PACING_IMM_CMD	0x040d
+#define IM_ASSIGN_IMM_CMD	0x040e
+#define IM_ABORT_IMM_CMD	0x040f
+#define IM_FORMAT_PREP_IMM_CMD	0x0417
+
+/*SCB (Subsystem Control Block) structure */
+struct im_scb {
+	unsigned short command;	/*command word (read, etc.) */
+	unsigned short enable;	/*enable word, modifies cmd */
+	union {
+		unsigned long log_blk_adr;	/*block address on SCSI device */
+		unsigned char scsi_cmd_length;	/*6,10,12, for other scsi cmd */
+	} u1;
+	unsigned long sys_buf_adr;	/*physical system memory adr */
+	unsigned long sys_buf_length;	/*size of sys mem buffer */
+	unsigned long tsb_adr;	/*Termination Status Block adr */
+	unsigned long scb_chain_adr;	/*optional SCB chain address */
+	union {
+		struct {
+			unsigned short count;	/*block count, on SCSI device */
+			unsigned short length;	/*block length, on SCSI device */
+		} blk;
+		unsigned char scsi_command[12];	/*other scsi command */
+	} u2;
+};
+
+/*structure scatter-gather element (for list of system memory areas) */
+struct im_sge {
+	void *address;
+	unsigned long byte_length;
+};
+
+/*structure returned by a get_pos_info command: */
+struct im_pos_info {
+	unsigned short pos_id;	/* adapter id */
+	unsigned char pos_3a;	/* pos 3 (if pos 6 = 0) */
+	unsigned char pos_2;	/* pos 2 */
+	unsigned char int_level;	/* interrupt level IRQ 11 or 14 */
+	unsigned char pos_4a;	/* pos 4 (if pos 6 = 0) */
+	unsigned short connector_size;	/* MCA connector size: 16 or 32 Bit */
+	unsigned char num_luns;	/* number of supported luns per device */
+	unsigned char num_puns;	/* number of supported puns */
+	unsigned char pacing_factor;	/* pacing factor */
+	unsigned char num_ldns;	/* number of ldns available */
+	unsigned char eoi_off;	/* time EOI and interrupt inactive */
+	unsigned char max_busy;	/* time between reset and busy on */
+	unsigned short cache_stat;	/* ldn cachestat. Bit=1 = not cached */
+	unsigned short retry_stat;	/* retry status of ldns. Bit=1=disabled */
+	unsigned char pos_4b;	/* pos 4 (if pos 6 = 1) */
+	unsigned char pos_3b;	/* pos 3 (if pos 6 = 1) */
+	unsigned char pos_6;	/* pos 6 */
+	unsigned char pos_5;	/* pos 5 */
+	unsigned short max_overlap;	/* maximum overlapping requests */
+	unsigned short num_bus;	/* number of SCSI-busses */
+};
+
+/*values for SCB command word */
+#define IM_NO_SYNCHRONOUS      0x0040	/*flag for any command */
+#define IM_NO_DISCONNECT       0x0080	/*flag for any command */
+#define IM_READ_DATA_CMD       0x1c01
+#define IM_WRITE_DATA_CMD      0x1c02
+#define IM_READ_VERIFY_CMD     0x1c03
+#define IM_WRITE_VERIFY_CMD    0x1c04
+#define IM_REQUEST_SENSE_CMD   0x1c08
+#define IM_READ_CAPACITY_CMD   0x1c09
+#define IM_DEVICE_INQUIRY_CMD  0x1c0b
+#define IM_READ_LOGICAL_CMD    0x1c2a
+#define IM_OTHER_SCSI_CMD_CMD  0x241f
+
+/* unused, but supported, SCB commands */
+#define IM_GET_COMMAND_COMPLETE_STATUS_CMD   0x1c07	/* command status */
+#define IM_GET_POS_INFO_CMD                  0x1c0a	/* returns neat stuff */
+#define IM_READ_PREFETCH_CMD                 0x1c31	/* caching controller only */
+#define IM_FOMAT_UNIT_CMD                    0x1c16	/* format unit */
+#define IM_REASSIGN_BLOCK_CMD                0x1c18	/* in case of error */
+
+/*values to set bits in the enable word of SCB */
+#define IM_READ_CONTROL              0x8000
+#define IM_REPORT_TSB_ONLY_ON_ERROR  0x4000
+#define IM_RETRY_ENABLE              0x2000
+#define IM_POINTER_TO_LIST           0x1000
+#define IM_SUPRESS_EXCEPTION_SHORT   0x0400
+#define IM_BYPASS_BUFFER             0x0200
+#define IM_CHAIN_ON_NO_ERROR         0x0001
+
+/*TSB (Termination Status Block) structure */
+struct im_tsb {
+	unsigned short end_status;
+	unsigned short reserved1;
+	unsigned long residual_byte_count;
+	unsigned long sg_list_element_adr;
+	unsigned short status_length;
+	unsigned char dev_status;
+	unsigned char cmd_status;
+	unsigned char dev_error;
+	unsigned char cmd_error;
+	unsigned short reserved2;
+	unsigned short reserved3;
+	unsigned short low_of_last_scb_adr;
+	unsigned short high_of_last_scb_adr;
+};
+
+/*subsystem uses interrupt request level 14 */
+#define IM_IRQ     14
+/*SCSI-2 F/W may evade to interrupt 11 */
+#define IM_IRQ_FW  11
+
+/* Model 95 has an additional alphanumeric display, which can be used
+   to display SCSI-activities. 8595 models do not have any disk led, which
+   makes this feature quite useful.
+   The regular PS/2 disk led is turned on/off by bits 6,7 of system
+   control port. */
+
+/* LED display-port (actually, last LED on display) */
+#define MOD95_LED_PORT	   0x108
+/* system-control-register of PS/2s with diskindicator */
+#define PS2_SYS_CTR        0x92
+/* activity displaying methods */
+#define LED_DISP           1
+#define LED_ADISP          2
+#define LED_ACTIVITY       4
+/* failed intr */
+#define CMD_FAIL           255
+
+/* The SCSI-ID(!) of the accessed SCSI-device is shown on PS/2-95 machines' LED
+   displays. ldn is no longer displayed here, because the ldn mapping is now 
+   done dynamically and the ldn <-> pun,lun maps can be looked-up at boottime 
+   or during uptime in /proc/scsi/ibmmca/<host_no> in case of trouble, 
+   interest, debugging or just for having fun. The left number gives the
+   host-adapter number and the right shows the accessed SCSI-ID. */
+
+/* display_mode is set by the ibmmcascsi= command line arg */
+static int display_mode = 0;
+/* set default adapter timeout */
+static unsigned int adapter_timeout = 45;
+/* for probing on feature-command: */
+static unsigned int global_command_error_excuse = 0;
+/* global setting by command line for adapter_speed */
+static int global_adapter_speed = 0;	/* full speed by default */
+
+/* Panel / LED on, do it right for F/W addressin, too. adisplay will
+ * just ignore ids>7, as the panel has only 7 digits available */
+#define PS2_DISK_LED_ON(ad,id) { if (display_mode & LED_DISP) { if (id>9) \
+    outw((ad+48)|((id+55)<<8), MOD95_LED_PORT ); else \
+    outw((ad+48)|((id+48)<<8), MOD95_LED_PORT ); } else \
+    if (display_mode & LED_ADISP) { if (id<7) outb((char)(id+48),MOD95_LED_PORT+1+id); \
+    outb((char)(ad+48), MOD95_LED_PORT); } \
+    if ((display_mode & LED_ACTIVITY)||(!display_mode)) \
+    outb(inb(PS2_SYS_CTR) | 0xc0, PS2_SYS_CTR); }
+
+/* Panel / LED off */
+/* bug fixed, Dec 15, 1997, where | was replaced by & here */
+#define PS2_DISK_LED_OFF() { if (display_mode & LED_DISP) \
+    outw(0x2020, MOD95_LED_PORT ); else if (display_mode & LED_ADISP) { \
+    outl(0x20202020,MOD95_LED_PORT); outl(0x20202020,MOD95_LED_PORT+4); } \
+    if ((display_mode & LED_ACTIVITY)||(!display_mode)) \
+    outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR); }
+
+/*list of supported subsystems */
+struct subsys_list_struct {
+	unsigned short mca_id;
+	char *description;
+};
+
+/* types of different supported hardware that goes to hostdata special */
+#define IBM_SCSI2_FW     0
+#define IBM_7568_WCACHE  1
+#define IBM_EXP_UNIT     2
+#define IBM_SCSI_WCACHE  3
+#define IBM_SCSI         4
+
+/* other special flags for hostdata structure */
+#define FORCED_DETECTION         100
+#define INTEGRATED_SCSI          101
+
+/* List of possible IBM-SCSI-adapters */
+static struct subsys_list_struct subsys_list[] = {
+	{0x8efc, "IBM SCSI-2 F/W Adapter"},	/* special = 0 */
+	{0x8efd, "IBM 7568 Industrial Computer SCSI Adapter w/Cache"},	/* special = 1 */
+	{0x8ef8, "IBM Expansion Unit SCSI Controller"},	/* special = 2 */
+	{0x8eff, "IBM SCSI Adapter w/Cache"},	/* special = 3 */
+	{0x8efe, "IBM SCSI Adapter"},	/* special = 4 */
+};
+
+/* Max number of logical devices (can be up from 0 to 14).  15 is the address
+of the adapter itself. */
+#define MAX_LOG_DEV  15
+
+/*local data for a logical device */
+struct logical_device {
+	struct im_scb scb;	/* SCSI-subsystem-control-block structure */
+	struct im_tsb tsb;	/* SCSI command complete status block structure */
+	struct im_sge sge[16];	/* scatter gather list structure */
+	unsigned char buf[256];	/* SCSI command return data buffer */
+	Scsi_Cmnd *cmd;		/* SCSI-command that is currently in progress */
+	int device_type;	/* type of the SCSI-device. See include/scsi/scsi.h
+				   for interpretation of the possible values */
+	int block_length;	/* blocksize of a particular logical SCSI-device */
+	int cache_flag;		/* 1 if this is uncached, 0 if cache is present for ldn */
+	int retry_flag;		/* 1 if adapter retry is disabled, 0 if enabled */
+};
+
+/* statistics of the driver during operations (for proc_info) */
+struct Driver_Statistics {
+	/* SCSI statistics on the adapter */
+	int ldn_access[MAX_LOG_DEV + 1];	/* total accesses on a ldn */
+	int ldn_read_access[MAX_LOG_DEV + 1];	/* total read-access on a ldn */
+	int ldn_write_access[MAX_LOG_DEV + 1];	/* total write-access on a ldn */
+	int ldn_inquiry_access[MAX_LOG_DEV + 1];	/* total inquiries on a ldn */
+	int ldn_modeselect_access[MAX_LOG_DEV + 1];	/* total mode selects on ldn */
+	int scbs;		/* short SCBs queued */
+	int long_scbs;		/* long SCBs queued */
+	int total_accesses;	/* total accesses on all ldns */
+	int total_interrupts;	/* total interrupts (should be
+				   same as total_accesses) */
+	int total_errors;	/* command completed with error */
+	/* dynamical assignment statistics */
+	int total_scsi_devices;	/* number of physical pun,lun */
+	int dyn_flag;		/* flag showing dynamical mode */
+	int dynamical_assignments;	/* number of remappings of ldns */
+	int ldn_assignments[MAX_LOG_DEV + 1];	/* number of remappings of each
+						   ldn */
+};
+
+/* data structure for each host adapter */
+struct ibmmca_hostdata {
+	/* array of logical devices: */
+	struct logical_device _ld[MAX_LOG_DEV + 1];
+	/* array to convert (pun, lun) into logical device number: */
+	unsigned char _get_ldn[16][8];
+	/*array that contains the information about the physical SCSI-devices
+	   attached to this host adapter: */
+	unsigned char _get_scsi[16][8];
+	/* used only when checking logical devices: */
+	int _local_checking_phase_flag;
+	/* report received interrupt: */
+	int _got_interrupt;
+	/* report termination-status of SCSI-command: */
+	int _stat_result;
+	/* reset status (used only when doing reset): */
+	int _reset_status;
+	/* code of the last SCSI command (needed for panic info): */
+	int _last_scsi_command[MAX_LOG_DEV + 1];
+	/* identifier of the last SCSI-command type */
+	int _last_scsi_type[MAX_LOG_DEV + 1];
+	/* last blockcount */
+	int _last_scsi_blockcount[MAX_LOG_DEV + 1];
+	/* last locgical block address */
+	unsigned long _last_scsi_logical_block[MAX_LOG_DEV + 1];
+	/* Counter that points on the next reassignable ldn for dynamical
+	   remapping. The default value is 7, that is the first reassignable
+	   number in the list at boottime: */
+	int _next_ldn;
+	/* Statistics-structure for this IBM-SCSI-host: */
+	struct Driver_Statistics _IBM_DS;
+	/* This hostadapters pos-registers pos2 until pos6 */
+	unsigned int _pos[8];
+	/* assign a special variable, that contains dedicated info about the
+	   adaptertype */
+	int _special;
+	/* connector size on the MCA bus */
+	int _connector_size;
+	/* synchronous SCSI transfer rate bitpattern */
+	int _adapter_speed;
+};
+
+/* macros to access host data structure */
+#define subsystem_pun(hi) (hosts[(hi)]->this_id)
+#define subsystem_maxid(hi) (hosts[(hi)]->max_id)
+#define ld(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_ld)
+#define get_ldn(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_get_ldn)
+#define get_scsi(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_get_scsi)
+#define local_checking_phase_flag(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_local_checking_phase_flag)
+#define got_interrupt(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_got_interrupt)
+#define stat_result(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_stat_result)
+#define reset_status(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_reset_status)
+#define last_scsi_command(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_command)
+#define last_scsi_type(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_type)
+#define last_scsi_blockcount(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_blockcount)
+#define last_scsi_logical_block(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_logical_block)
+#define last_scsi_type(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_last_scsi_type)
+#define next_ldn(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_next_ldn)
+#define IBM_DS(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_IBM_DS)
+#define special(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_special)
+#define subsystem_connector_size(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_connector_size)
+#define adapter_speed(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_adapter_speed)
+#define pos2(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[2])
+#define pos3(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[3])
+#define pos4(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[4])
+#define pos5(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[5])
+#define pos6(hi) (((struct ibmmca_hostdata *) hosts[(hi)]->hostdata)->_pos[6])
+
+/* Define a arbitrary number as subsystem-marker-type. This number is, as
+   described in the ANSI-SCSI-standard, not occupied by other device-types. */
+#define TYPE_IBM_SCSI_ADAPTER   0x2F
+
+/* Define 0xFF for no device type, because this type is not defined within
+   the ANSI-SCSI-standard, therefore, it can be used and should not cause any
+   harm. */
+#define TYPE_NO_DEVICE          0xFF
+
+/* define medium-changer. If this is not defined previously, e.g. Linux
+   2.0.x, define this type here. */
+#ifndef TYPE_MEDIUM_CHANGER
+#define TYPE_MEDIUM_CHANGER     0x08
+#endif
+
+/* define possible operations for the immediate_assign command */
+#define SET_LDN        0
+#define REMOVE_LDN     1
+
+/* ldn which is used to probe the SCSI devices */
+#define PROBE_LDN      0
+
+/* reset status flag contents */
+#define IM_RESET_NOT_IN_PROGRESS         0
+#define IM_RESET_IN_PROGRESS             1
+#define IM_RESET_FINISHED_OK             2
+#define IM_RESET_FINISHED_FAIL           3
+#define IM_RESET_NOT_IN_PROGRESS_NO_INT  4
+#define IM_RESET_FINISHED_OK_NO_INT      5
+
+/* define undefined SCSI-command */
+#define NO_SCSI                  0xffff
+
+/*-----------------------------------------------------------------------*/
+
+/* if this is nonzero, ibmmcascsi option has been passed to the kernel */
+static int io_port[IM_MAX_HOSTS] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+static int scsi_id[IM_MAX_HOSTS] = { 7, 7, 7, 7, 7, 7, 7, 7 };
+
+/* fill module-parameters only, when this define is present.
+   (that is kernel version 2.1.x) */
+#if defined(MODULE)
+static char *boot_options = NULL;
+module_param(boot_options, charp, 0);
+module_param_array(io_port, int, NULL, 0);
+module_param_array(scsi_id, int, NULL, 0);
+
+#if 0 /* FIXME: No longer exist? --RR */
+MODULE_PARM(display, "1i");
+MODULE_PARM(adisplay, "1i");
+MODULE_PARM(normal, "1i");
+MODULE_PARM(ansi, "1i");
+#endif
+#endif
+/*counter of concurrent disk read/writes, to turn on/off disk led */
+static int disk_rw_in_progress = 0;
+
+/* host information */
+static int found = 0;
+static struct Scsi_Host *hosts[IM_MAX_HOSTS + 1] = {
+	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL
+};
+static unsigned int pos[8];	/* whole pos register-line for diagnosis */
+/* Taking into account the additions, made by ZP Gu.
+ * This selects now the preset value from the configfile and
+ * offers the 'normal' commandline option to be accepted */
+#ifdef CONFIG_IBMMCA_SCSI_ORDER_STANDARD
+static char ibm_ansi_order = 1;
+#else
+static char ibm_ansi_order = 0;
+#endif
+
+static void issue_cmd(int, unsigned long, unsigned char);
+static void internal_done(Scsi_Cmnd * cmd);
+static void check_devices(int, int);
+static int immediate_assign(int, unsigned int, unsigned int, unsigned int, unsigned int);
+static int immediate_feature(int, unsigned int, unsigned int);
+#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET
+static int immediate_reset(int, unsigned int);
+#endif
+static int device_inquiry(int, int);
+static int read_capacity(int, int);
+static int get_pos_info(int);
+static char *ti_p(int);
+static char *ti_l(int);
+static char *ibmrate(unsigned int, int);
+static int probe_display(int);
+static int probe_bus_mode(int);
+static int device_exists(int, int, int *, int *);
+static struct Scsi_Host *ibmmca_register(Scsi_Host_Template *, int, int, int, char *);
+static int option_setup(char *);
+/* local functions needed for proc_info */
+static int ldn_access_load(int, int);
+static int ldn_access_total_read_write(int);
+
+static irqreturn_t interrupt_handler(int irq, void *dev_id,
+					struct pt_regs *regs)
+{
+	int host_index, ihost_index;
+	unsigned int intr_reg;
+	unsigned int cmd_result;
+	unsigned int ldn;
+	Scsi_Cmnd *cmd;
+	int lastSCSI;
+	struct Scsi_Host *dev = dev_id;
+
+	spin_lock(dev->host_lock);
+	    /* search for one adapter-response on shared interrupt */
+	    for (host_index = 0; hosts[host_index] && !(inb(IM_STAT_REG(host_index)) & IM_INTR_REQUEST); host_index++);
+	/* return if some other device on this IRQ caused the interrupt */
+	if (!hosts[host_index]) {
+		spin_unlock(dev->host_lock);
+		return IRQ_NONE;
+	}
+
+	/* the reset-function already did all the job, even ints got
+	   renabled on the subsystem, so just return */
+	if ((reset_status(host_index) == IM_RESET_NOT_IN_PROGRESS_NO_INT) || (reset_status(host_index) == IM_RESET_FINISHED_OK_NO_INT)) {
+		reset_status(host_index) = IM_RESET_NOT_IN_PROGRESS;
+		spin_unlock(dev->host_lock);
+		return IRQ_HANDLED;
+	}
+
+	/*must wait for attention reg not busy, then send EOI to subsystem */
+	while (1) {
+		if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
+			break;
+		cpu_relax();
+	}
+	ihost_index = host_index;
+	/*get command result and logical device */
+	intr_reg = (unsigned char) (inb(IM_INTR_REG(ihost_index)));
+	cmd_result = intr_reg & 0xf0;
+	ldn = intr_reg & 0x0f;
+	/* get the last_scsi_command here */
+	lastSCSI = last_scsi_command(ihost_index)[ldn];
+	outb(IM_EOI | ldn, IM_ATTN_REG(ihost_index));
+	
+	/*these should never happen (hw fails, or a local programming bug) */
+	if (!global_command_error_excuse) {
+		switch (cmd_result) {
+			/* Prevent from Ooopsing on error to show the real reason */
+		case IM_ADAPTER_HW_FAILURE:
+		case IM_SOFTWARE_SEQUENCING_ERROR:
+		case IM_CMD_ERROR:
+			printk(KERN_ERR "IBM MCA SCSI: Fatal Subsystem ERROR!\n");
+			printk(KERN_ERR "              Last cmd=0x%x, ena=%x, len=", lastSCSI, ld(ihost_index)[ldn].scb.enable);
+			if (ld(ihost_index)[ldn].cmd)
+				printk("%ld/%ld,", (long) (ld(ihost_index)[ldn].cmd->request_bufflen), (long) (ld(ihost_index)[ldn].scb.sys_buf_length));
+			else
+				printk("none,");
+			if (ld(ihost_index)[ldn].cmd)
+				printk("Blocksize=%d", ld(ihost_index)[ldn].scb.u2.blk.length);
+			else
+				printk("Blocksize=none");
+			printk(", host=0x%x, ldn=0x%x\n", ihost_index, ldn);
+			if (ld(ihost_index)[ldn].cmd) {
+				printk(KERN_ERR "Blockcount=%d/%d\n", last_scsi_blockcount(ihost_index)[ldn], ld(ihost_index)[ldn].scb.u2.blk.count);
+				printk(KERN_ERR "Logical block=%lx/%lx\n", last_scsi_logical_block(ihost_index)[ldn], ld(ihost_index)[ldn].scb.u1.log_blk_adr);
+			}
+			printk(KERN_ERR "Reason given: %s\n", (cmd_result == IM_ADAPTER_HW_FAILURE) ? "HARDWARE FAILURE" : (cmd_result == IM_SOFTWARE_SEQUENCING_ERROR) ? "SOFTWARE SEQUENCING ERROR" : (cmd_result == IM_CMD_ERROR) ? "COMMAND ERROR" : "UNKNOWN");
+			/* if errors appear, enter this section to give detailed info */
+			printk(KERN_ERR "IBM MCA SCSI: Subsystem Error-Status follows:\n");
+			printk(KERN_ERR "              Command Type................: %x\n", last_scsi_type(ihost_index)[ldn]);
+			printk(KERN_ERR "              Attention Register..........: %x\n", inb(IM_ATTN_REG(ihost_index)));
+			printk(KERN_ERR "              Basic Control Register......: %x\n", inb(IM_CTR_REG(ihost_index)));
+			printk(KERN_ERR "              Interrupt Status Register...: %x\n", intr_reg);
+			printk(KERN_ERR "              Basic Status Register.......: %x\n", inb(IM_STAT_REG(ihost_index)));
+			if ((last_scsi_type(ihost_index)[ldn] == IM_SCB) || (last_scsi_type(ihost_index)[ldn] == IM_LONG_SCB)) {
+				printk(KERN_ERR "              SCB-Command.................: %x\n", ld(ihost_index)[ldn].scb.command);
+				printk(KERN_ERR "              SCB-Enable..................: %x\n", ld(ihost_index)[ldn].scb.enable);
+				printk(KERN_ERR "              SCB-logical block address...: %lx\n", ld(ihost_index)[ldn].scb.u1.log_blk_adr);
+				printk(KERN_ERR "              SCB-system buffer address...: %lx\n", ld(ihost_index)[ldn].scb.sys_buf_adr);
+				printk(KERN_ERR "              SCB-system buffer length....: %lx\n", ld(ihost_index)[ldn].scb.sys_buf_length);
+				printk(KERN_ERR "              SCB-tsb address.............: %lx\n", ld(ihost_index)[ldn].scb.tsb_adr);
+				printk(KERN_ERR "              SCB-Chain address...........: %lx\n", ld(ihost_index)[ldn].scb.scb_chain_adr);
+				printk(KERN_ERR "              SCB-block count.............: %x\n", ld(ihost_index)[ldn].scb.u2.blk.count);
+				printk(KERN_ERR "              SCB-block length............: %x\n", ld(ihost_index)[ldn].scb.u2.blk.length);
+			}
+			printk(KERN_ERR "              Send this report to the maintainer.\n");
+			panic("IBM MCA SCSI: Fatal error message from the subsystem (0x%X,0x%X)!\n", lastSCSI, cmd_result);
+			break;
+		}
+	} else {
+		/* The command error handling is made silent, but we tell the
+		 * calling function, that there is a reported error from the
+		 * adapter. */
+		switch (cmd_result) {
+		case IM_ADAPTER_HW_FAILURE:
+		case IM_SOFTWARE_SEQUENCING_ERROR:
+		case IM_CMD_ERROR:
+			global_command_error_excuse = CMD_FAIL;
+			break;
+		default:
+			global_command_error_excuse = 0;
+			break;
+		}
+	}
+	/* if no panic appeared, increase the interrupt-counter */
+	IBM_DS(ihost_index).total_interrupts++;
+	/*only for local checking phase */
+	if (local_checking_phase_flag(ihost_index)) {
+		stat_result(ihost_index) = cmd_result;
+		got_interrupt(ihost_index) = 1;
+		reset_status(ihost_index) = IM_RESET_FINISHED_OK;
+		last_scsi_command(ihost_index)[ldn] = NO_SCSI;
+		spin_unlock(dev->host_lock);
+		return IRQ_HANDLED;
+	}
+	/* handling of commands coming from upper level of scsi driver */
+	if (last_scsi_type(ihost_index)[ldn] == IM_IMM_CMD) {
+		/* verify ldn, and may handle rare reset immediate command */
+		if ((reset_status(ihost_index) == IM_RESET_IN_PROGRESS) && (last_scsi_command(ihost_index)[ldn] == IM_RESET_IMM_CMD)) {
+			if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) {
+				disk_rw_in_progress = 0;
+				PS2_DISK_LED_OFF();
+				reset_status(ihost_index) = IM_RESET_FINISHED_FAIL;
+			} else {
+				/*reset disk led counter, turn off disk led */
+				disk_rw_in_progress = 0;
+				PS2_DISK_LED_OFF();
+				reset_status(ihost_index) = IM_RESET_FINISHED_OK;
+			}
+			stat_result(ihost_index) = cmd_result;
+			last_scsi_command(ihost_index)[ldn] = NO_SCSI;
+			last_scsi_type(ihost_index)[ldn] = 0;
+			spin_unlock(dev->host_lock);
+			return IRQ_HANDLED;
+		} else if (last_scsi_command(ihost_index)[ldn] == IM_ABORT_IMM_CMD) {
+			/* react on SCSI abort command */
+#ifdef IM_DEBUG_PROBE
+			printk("IBM MCA SCSI: Interrupt from SCSI-abort.\n");
+#endif
+			disk_rw_in_progress = 0;
+			PS2_DISK_LED_OFF();
+			cmd = ld(ihost_index)[ldn].cmd;
+			ld(ihost_index)[ldn].cmd = NULL;
+			if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE)
+				cmd->result = DID_NO_CONNECT << 16;
+			else
+				cmd->result = DID_ABORT << 16;
+			stat_result(ihost_index) = cmd_result;
+			last_scsi_command(ihost_index)[ldn] = NO_SCSI;
+			last_scsi_type(ihost_index)[ldn] = 0;
+			if (cmd->scsi_done)
+				(cmd->scsi_done) (cmd);	/* should be the internal_done */
+			spin_unlock(dev->host_lock);
+			return IRQ_HANDLED;
+		} else {
+			disk_rw_in_progress = 0;
+			PS2_DISK_LED_OFF();
+			reset_status(ihost_index) = IM_RESET_FINISHED_OK;
+			stat_result(ihost_index) = cmd_result;
+			last_scsi_command(ihost_index)[ldn] = NO_SCSI;
+			spin_unlock(dev->host_lock);
+			return IRQ_HANDLED;
+		}
+	}
+	last_scsi_command(ihost_index)[ldn] = NO_SCSI;
+	last_scsi_type(ihost_index)[ldn] = 0;
+	cmd = ld(ihost_index)[ldn].cmd;
+	ld(ihost_index)[ldn].cmd = NULL;
+#ifdef IM_DEBUG_TIMEOUT
+	if (cmd) {
+		if ((cmd->target == TIMEOUT_PUN) && (cmd->device->lun == TIMEOUT_LUN)) {
+			printk("IBM MCA SCSI: Ignoring interrupt from pun=%x, lun=%x.\n", cmd->target, cmd->device->lun);
+			return IRQ_HANDLED;
+		}
+	}
+#endif
+	/*if no command structure, just return, else clear cmd */
+	if (!cmd)
+	{
+		spin_unlock(dev->host_lock);
+		return IRQ_HANDLED;
+	}
+
+#ifdef IM_DEBUG_INT
+	printk("cmd=%02x ireg=%02x ds=%02x cs=%02x de=%02x ce=%02x\n", cmd->cmnd[0], intr_reg, ld(ihost_index)[ldn].tsb.dev_status, ld(ihost_index)[ldn].tsb.cmd_status, ld(ihost_index)[ldn].tsb.dev_error, ld(ihost_index)[ldn].tsb.cmd_error);
+#endif
+	/*if this is end of media read/write, may turn off PS/2 disk led */
+	if ((ld(ihost_index)[ldn].device_type != TYPE_NO_LUN) && (ld(ihost_index)[ldn].device_type != TYPE_NO_DEVICE)) {
+		/* only access this, if there was a valid device addressed */
+		if (--disk_rw_in_progress == 0)
+			PS2_DISK_LED_OFF();
+	}
+
+	/* IBM describes the status-mask to be 0x1e, but this is not conform
+	 * with SCSI-definition, I suppose, the reason for it is that IBM
+	 * adapters do not support CMD_TERMINATED, TASK_SET_FULL and
+	 * ACA_ACTIVE as returning statusbyte information. (ML) */
+	if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) {
+		cmd->result = (unsigned char) (ld(ihost_index)[ldn].tsb.dev_status & 0x1e);
+		IBM_DS(ihost_index).total_errors++;
+	} else
+		cmd->result = 0;
+	/* write device status into cmd->result, and call done function */
+	if (lastSCSI == NO_SCSI) {	/* unexpected interrupt :-( */
+		cmd->result |= DID_BAD_INTR << 16;
+		printk("IBM MCA SCSI: WARNING - Interrupt from non-pending SCSI-command!\n");
+	} else			/* things went right :-) */
+		cmd->result |= DID_OK << 16;
+	if (cmd->scsi_done)
+		(cmd->scsi_done) (cmd);
+	spin_unlock(dev->host_lock);
+	return IRQ_HANDLED;
+}
+
+static void issue_cmd(int host_index, unsigned long cmd_reg, unsigned char attn_reg)
+{
+	unsigned long flags;
+	/* must wait for attention reg not busy */
+	while (1) {
+		spin_lock_irqsave(hosts[host_index]->host_lock, flags);
+		if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
+			break;
+		spin_unlock_irqrestore(hosts[host_index]->host_lock, flags);
+	}
+	/* write registers and enable system interrupts */
+	outl(cmd_reg, IM_CMD_REG(host_index));
+	outb(attn_reg, IM_ATTN_REG(host_index));
+	spin_unlock_irqrestore(hosts[host_index]->host_lock, flags);
+}
+
+static void internal_done(Scsi_Cmnd * cmd)
+{
+	cmd->SCp.Status++;
+	return;
+}
+
+/* SCSI-SCB-command for device_inquiry */
+static int device_inquiry(int host_index, int ldn)
+{
+	int retr;
+	struct im_scb *scb;
+	struct im_tsb *tsb;
+	unsigned char *buf;
+
+	scb = &(ld(host_index)[ldn].scb);
+	tsb = &(ld(host_index)[ldn].tsb);
+	buf = (unsigned char *) (&(ld(host_index)[ldn].buf));
+	ld(host_index)[ldn].tsb.dev_status = 0;	/* prepare statusblock */
+	for (retr = 0; retr < 3; retr++) {
+		/* fill scb with inquiry command */
+		scb->command = IM_DEVICE_INQUIRY_CMD | IM_NO_DISCONNECT;
+		scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_RETRY_ENABLE | IM_BYPASS_BUFFER;
+		last_scsi_command(host_index)[ldn] = IM_DEVICE_INQUIRY_CMD;
+		last_scsi_type(host_index)[ldn] = IM_SCB;
+		scb->sys_buf_adr = isa_virt_to_bus(buf);
+		scb->sys_buf_length = 255;	/* maximum bufferlength gives max info */
+		scb->tsb_adr = isa_virt_to_bus(tsb);
+		/* issue scb to passed ldn, and busy wait for interrupt */
+		got_interrupt(host_index) = 0;
+		issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | ldn);
+		while (!got_interrupt(host_index))
+			barrier();
+
+		/*if command succesful, break */
+		if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
+			return 1;
+	}
+	/*if all three retries failed, return "no device at this ldn" */
+	if (retr >= 3)
+		return 0;
+	else
+		return 1;
+}
+
+static int read_capacity(int host_index, int ldn)
+{
+	int retr;
+	struct im_scb *scb;
+	struct im_tsb *tsb;
+	unsigned char *buf;
+
+	scb = &(ld(host_index)[ldn].scb);
+	tsb = &(ld(host_index)[ldn].tsb);
+	buf = (unsigned char *) (&(ld(host_index)[ldn].buf));
+	ld(host_index)[ldn].tsb.dev_status = 0;
+	for (retr = 0; retr < 3; retr++) {
+		/*fill scb with read capacity command */
+		scb->command = IM_READ_CAPACITY_CMD;
+		scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_RETRY_ENABLE | IM_BYPASS_BUFFER;
+		last_scsi_command(host_index)[ldn] = IM_READ_CAPACITY_CMD;
+		last_scsi_type(host_index)[ldn] = IM_SCB;
+		scb->sys_buf_adr = isa_virt_to_bus(buf);
+		scb->sys_buf_length = 8;
+		scb->tsb_adr = isa_virt_to_bus(tsb);
+		/*issue scb to passed ldn, and busy wait for interrupt */
+		got_interrupt(host_index) = 0;
+		issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | ldn);
+		while (!got_interrupt(host_index))
+			barrier();
+
+		/*if got capacity, get block length and return one device found */
+		if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
+			return 1;
+	}
+	/*if all three retries failed, return "no device at this ldn" */
+	if (retr >= 3)
+		return 0;
+	else
+		return 1;
+}
+
+static int get_pos_info(int host_index)
+{
+	int retr;
+	struct im_scb *scb;
+	struct im_tsb *tsb;
+	unsigned char *buf;
+
+	scb = &(ld(host_index)[MAX_LOG_DEV].scb);
+	tsb = &(ld(host_index)[MAX_LOG_DEV].tsb);
+	buf = (unsigned char *) (&(ld(host_index)[MAX_LOG_DEV].buf));
+	ld(host_index)[MAX_LOG_DEV].tsb.dev_status = 0;
+	for (retr = 0; retr < 3; retr++) {
+		/*fill scb with get_pos_info command */
+		scb->command = IM_GET_POS_INFO_CMD;
+		scb->enable = IM_READ_CONTROL | IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE | IM_BYPASS_BUFFER;
+		last_scsi_command(host_index)[MAX_LOG_DEV] = IM_GET_POS_INFO_CMD;
+		last_scsi_type(host_index)[MAX_LOG_DEV] = IM_SCB;
+		scb->sys_buf_adr = isa_virt_to_bus(buf);
+		if (special(host_index) == IBM_SCSI2_FW)
+			scb->sys_buf_length = 256;	/* get all info from F/W adapter */
+		else
+			scb->sys_buf_length = 18;	/* get exactly 18 bytes for other SCSI */
+		scb->tsb_adr = isa_virt_to_bus(tsb);
+		/*issue scb to ldn=15, and busy wait for interrupt */
+		got_interrupt(host_index) = 0;
+		issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | MAX_LOG_DEV);
+		
+		/* FIXME: timeout */
+		while (!got_interrupt(host_index))
+			barrier();
+
+		/*if got POS-stuff, get block length and return one device found */
+		if ((stat_result(host_index) == IM_SCB_CMD_COMPLETED) || (stat_result(host_index) == IM_SCB_CMD_COMPLETED_WITH_RETRIES))
+			return 1;
+	}
+	/* if all three retries failed, return "no device at this ldn" */
+	if (retr >= 3)
+		return 0;
+	else
+		return 1;
+}
+
+/* SCSI-immediate-command for assign. This functions maps/unmaps specific
+ ldn-numbers on SCSI (PUN,LUN). It is needed for presetting of the
+ subsystem and for dynamical remapping od ldns. */
+static int immediate_assign(int host_index, unsigned int pun, unsigned int lun, unsigned int ldn, unsigned int operation)
+{
+	int retr;
+	unsigned long imm_cmd;
+
+	for (retr = 0; retr < 3; retr++) {
+		/* select mutation level of the SCSI-adapter */
+		switch (special(host_index)) {
+		case IBM_SCSI2_FW:
+			imm_cmd = (unsigned long) (IM_ASSIGN_IMM_CMD);
+			imm_cmd |= (unsigned long) ((lun & 7) << 24);
+			imm_cmd |= (unsigned long) ((operation & 1) << 23);
+			imm_cmd |= (unsigned long) ((pun & 7) << 20) | ((pun & 8) << 24);
+			imm_cmd |= (unsigned long) ((ldn & 15) << 16);
+			break;
+		default:
+			imm_cmd = inl(IM_CMD_REG(host_index));
+			imm_cmd &= (unsigned long) (0xF8000000);	/* keep reserved bits */
+			imm_cmd |= (unsigned long) (IM_ASSIGN_IMM_CMD);
+			imm_cmd |= (unsigned long) ((lun & 7) << 24);
+			imm_cmd |= (unsigned long) ((operation & 1) << 23);
+			imm_cmd |= (unsigned long) ((pun & 7) << 20);
+			imm_cmd |= (unsigned long) ((ldn & 15) << 16);
+			break;
+		}
+		last_scsi_command(host_index)[MAX_LOG_DEV] = IM_ASSIGN_IMM_CMD;
+		last_scsi_type(host_index)[MAX_LOG_DEV] = IM_IMM_CMD;
+		got_interrupt(host_index) = 0;
+		issue_cmd(host_index, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV);
+		while (!got_interrupt(host_index))
+			barrier();
+
+		/*if command succesful, break */
+		if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
+			return 1;
+	}
+	if (retr >= 3)
+		return 0;
+	else
+		return 1;
+}
+
+static int immediate_feature(int host_index, unsigned int speed, unsigned int timeout)
+{
+	int retr;
+	unsigned long imm_cmd;
+
+	for (retr = 0; retr < 3; retr++) {
+		/* select mutation level of the SCSI-adapter */
+		imm_cmd = IM_FEATURE_CTR_IMM_CMD;
+		imm_cmd |= (unsigned long) ((speed & 0x7) << 29);
+		imm_cmd |= (unsigned long) ((timeout & 0x1fff) << 16);
+		last_scsi_command(host_index)[MAX_LOG_DEV] = IM_FEATURE_CTR_IMM_CMD;
+		last_scsi_type(host_index)[MAX_LOG_DEV] = IM_IMM_CMD;
+		got_interrupt(host_index) = 0;
+		/* we need to run into command errors in order to probe for the
+		 * right speed! */
+		global_command_error_excuse = 1;
+		issue_cmd(host_index, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV);
+		
+		/* FIXME: timeout */
+		while (!got_interrupt(host_index))
+			barrier();
+		if (global_command_error_excuse == CMD_FAIL) {
+			global_command_error_excuse = 0;
+			return 2;
+		} else
+			global_command_error_excuse = 0;
+		/*if command succesful, break */
+		if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
+			return 1;
+	}
+	if (retr >= 3)
+		return 0;
+	else
+		return 1;
+}
+
+#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET
+static int immediate_reset(int host_index, unsigned int ldn)
+{
+	int retries;
+	int ticks;
+	unsigned long imm_command;
+
+	for (retries = 0; retries < 3; retries++) {
+		imm_command = inl(IM_CMD_REG(host_index));
+		imm_command &= (unsigned long) (0xFFFF0000);	/* keep reserved bits */
+		imm_command |= (unsigned long) (IM_RESET_IMM_CMD);
+		last_scsi_command(host_index)[ldn] = IM_RESET_IMM_CMD;
+		last_scsi_type(host_index)[ldn] = IM_IMM_CMD;
+		got_interrupt(host_index) = 0;
+		reset_status(host_index) = IM_RESET_IN_PROGRESS;
+		issue_cmd(host_index, (unsigned long) (imm_command), IM_IMM_CMD | ldn);
+		ticks = IM_RESET_DELAY * HZ;
+		while (reset_status(host_index) == IM_RESET_IN_PROGRESS && --ticks) {
+			udelay((1 + 999 / HZ) * 1000);
+			barrier();
+		}
+		/* if reset did not complete, just complain */
+		if (!ticks) {
+			printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY);
+			reset_status(host_index) = IM_RESET_FINISHED_OK;
+			/* did not work, finish */
+			return 1;
+		}
+		/*if command succesful, break */
+		if (stat_result(host_index) == IM_IMMEDIATE_CMD_COMPLETED)
+			return 1;
+	}
+	if (retries >= 3)
+		return 0;
+	else
+		return 1;
+}
+#endif
+
+/* type-interpreter for physical device numbers */
+static char *ti_p(int dev)
+{
+	switch (dev) {
+	case TYPE_IBM_SCSI_ADAPTER:
+		return ("A");
+	case TYPE_DISK:
+		return ("D");
+	case TYPE_TAPE:
+		return ("T");
+	case TYPE_PROCESSOR:
+		return ("P");
+	case TYPE_WORM:
+		return ("W");
+	case TYPE_ROM:
+		return ("R");
+	case TYPE_SCANNER:
+		return ("S");
+	case TYPE_MOD:
+		return ("M");
+	case TYPE_MEDIUM_CHANGER:
+		return ("C");
+	case TYPE_NO_LUN:
+		return ("+");	/* show NO_LUN */
+	}
+	return ("-");		/* TYPE_NO_DEVICE and others */
+}
+
+/* interpreter for logical device numbers (ldn) */
+static char *ti_l(int val)
+{
+	const char hex[16] = "0123456789abcdef";
+	static char answer[2];
+
+	answer[1] = (char) (0x0);
+	if (val <= MAX_LOG_DEV)
+		answer[0] = hex[val];
+	else
+		answer[0] = '-';
+	return (char *) &answer;
+}
+
+/* transfers bitpattern of the feature command to values in MHz */
+static char *ibmrate(unsigned int speed, int i)
+{
+	switch (speed) {
+	case 0:
+		return i ? "5.00" : "10.00";
+	case 1:
+		return i ? "4.00" : "8.00";
+	case 2:
+		return i ? "3.33" : "6.66";
+	case 3:
+		return i ? "2.86" : "5.00";
+	case 4:
+		return i ? "2.50" : "4.00";
+	case 5:
+		return i ? "2.22" : "3.10";
+	case 6:
+		return i ? "2.00" : "2.50";
+	case 7:
+		return i ? "1.82" : "2.00";
+	}
+	return "---";
+}
+
+static int probe_display(int what)
+{
+	static int rotator = 0;
+	const char rotor[] = "|/-\\";
+
+	if (!(display_mode & LED_DISP))
+		return 0;
+	if (!what) {
+		outl(0x20202020, MOD95_LED_PORT);
+		outl(0x20202020, MOD95_LED_PORT + 4);
+	} else {
+		outb('S', MOD95_LED_PORT + 7);
+		outb('C', MOD95_LED_PORT + 6);
+		outb('S', MOD95_LED_PORT + 5);
+		outb('I', MOD95_LED_PORT + 4);
+		outb('i', MOD95_LED_PORT + 3);
+		outb('n', MOD95_LED_PORT + 2);
+		outb('i', MOD95_LED_PORT + 1);
+		outb((char) (rotor[rotator]), MOD95_LED_PORT);
+		rotator++;
+		if (rotator > 3)
+			rotator = 0;
+	}
+	return 0;
+}
+
+static int probe_bus_mode(int host_index)
+{
+	struct im_pos_info *info;
+	int num_bus = 0;
+	int ldn;
+
+	info = (struct im_pos_info *) (&(ld(host_index)[MAX_LOG_DEV].buf));
+	if (get_pos_info(host_index)) {
+		if (info->connector_size & 0xf000)
+			subsystem_connector_size(host_index) = 16;
+		else
+			subsystem_connector_size(host_index) = 32;
+		num_bus |= (info->pos_4b & 8) >> 3;
+		for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
+			if ((special(host_index) == IBM_SCSI_WCACHE) || (special(host_index) == IBM_7568_WCACHE)) {
+				if (!((info->cache_stat >> ldn) & 1))
+					ld(host_index)[ldn].cache_flag = 0;
+			}
+			if (!((info->retry_stat >> ldn) & 1))
+				ld(host_index)[ldn].retry_flag = 0;
+		}
+#ifdef IM_DEBUG_PROBE
+		printk("IBM MCA SCSI: SCSI-Cache bits: ");
+		for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
+			printk("%d", ld(host_index)[ldn].cache_flag);
+		}
+		printk("\nIBM MCA SCSI: SCSI-Retry bits: ");
+		for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
+			printk("%d", ld(host_index)[ldn].retry_flag);
+		}
+		printk("\n");
+#endif
+	}
+	return num_bus;
+}
+
+/* probing scsi devices */
+static void check_devices(int host_index, int adaptertype)
+{
+	int id, lun, ldn, ticks;
+	int count_devices;	/* local counter for connected device */
+	int max_pun;
+	int num_bus;
+	int speedrun;		/* local adapter_speed check variable */
+
+	/* assign default values to certain variables */
+	ticks = 0;
+	count_devices = 0;
+	IBM_DS(host_index).dyn_flag = 0;	/* normally no need for dynamical ldn management */
+	IBM_DS(host_index).total_errors = 0;	/* set errorcounter to 0 */
+	next_ldn(host_index) = 7;	/* next ldn to be assigned is 7, because 0-6 is 'hardwired' */
+
+	/* initialize the very important driver-informational arrays/structs */
+	memset(ld(host_index), 0, sizeof(ld(host_index)));
+	for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) {
+		last_scsi_command(host_index)[ldn] = NO_SCSI;	/* emptify last SCSI-command storage */
+		last_scsi_type(host_index)[ldn] = 0;
+		ld(host_index)[ldn].cache_flag = 1;
+		ld(host_index)[ldn].retry_flag = 1;
+	}
+	memset(get_ldn(host_index), TYPE_NO_DEVICE, sizeof(get_ldn(host_index)));	/* this is essential ! */
+	memset(get_scsi(host_index), TYPE_NO_DEVICE, sizeof(get_scsi(host_index)));	/* this is essential ! */
+	for (lun = 0; lun < 8; lun++) {
+		/* mark the adapter at its pun on all luns */
+		get_scsi(host_index)[subsystem_pun(host_index)][lun] = TYPE_IBM_SCSI_ADAPTER;
+		get_ldn(host_index)[subsystem_pun(host_index)][lun] = MAX_LOG_DEV;	/* make sure, the subsystem
+											   ldn is active for all
+											   luns. */
+	}
+	probe_display(0);	/* Supercool display usage during SCSI-probing. */
+	/* This makes sense, when booting without any */
+	/* monitor connected on model XX95. */
+
+	/* STEP 1: */
+	adapter_speed(host_index) = global_adapter_speed;
+	speedrun = adapter_speed(host_index);
+	while (immediate_feature(host_index, speedrun, adapter_timeout) == 2) {
+		probe_display(1);
+		if (speedrun == 7)
+			panic("IBM MCA SCSI: Cannot set Synchronous-Transfer-Rate!\n");
+		speedrun++;
+		if (speedrun > 7)
+			speedrun = 7;
+	}
+	adapter_speed(host_index) = speedrun;
+	/* Get detailed information about the current adapter, necessary for
+	 * device operations: */
+	num_bus = probe_bus_mode(host_index);
+
+	/* num_bus contains only valid data for the F/W adapter! */
+	if (adaptertype == IBM_SCSI2_FW) {	/* F/W SCSI adapter: */
+		/* F/W adapter PUN-space extension evaluation: */
+		if (num_bus) {
+			printk(KERN_INFO "IBM MCA SCSI: Separate bus mode (wide-addressing enabled)\n");
+			subsystem_maxid(host_index) = 16;
+		} else {
+			printk(KERN_INFO "IBM MCA SCSI: Combined bus mode (wide-addressing disabled)\n");
+			subsystem_maxid(host_index) = 8;
+		}
+		printk(KERN_INFO "IBM MCA SCSI: Sync.-Rate (F/W: 20, Int.: 10, Ext.: %s) MBytes/s\n", ibmrate(speedrun, adaptertype));
+	} else			/* all other IBM SCSI adapters: */
+		printk(KERN_INFO "IBM MCA SCSI: Synchronous-SCSI-Transfer-Rate: %s MBytes/s\n", ibmrate(speedrun, adaptertype));
+
+	/* assign correct PUN device space */
+	max_pun = subsystem_maxid(host_index);
+
+#ifdef IM_DEBUG_PROBE
+	printk("IBM MCA SCSI: Current SCSI-host index: %d\n", host_index);
+	printk("IBM MCA SCSI: Removing default logical SCSI-device mapping.");
+#else
+	printk(KERN_INFO "IBM MCA SCSI: Dev. Order: %s, Mapping (takes <2min): ", (ibm_ansi_order) ? "ANSI" : "New");
+#endif
+	for (ldn = 0; ldn < MAX_LOG_DEV; ldn++) {
+		probe_display(1);
+#ifdef IM_DEBUG_PROBE
+		printk(".");
+#endif
+		immediate_assign(host_index, 0, 0, ldn, REMOVE_LDN);	/* remove ldn (wherever) */
+	}
+	lun = 0;		/* default lun is 0 */
+#ifndef IM_DEBUG_PROBE
+	printk("cleared,");
+#endif
+	/* STEP 2: */
+#ifdef IM_DEBUG_PROBE
+	printk("\nIBM MCA SCSI: Scanning SCSI-devices.");
+#endif
+	for (id = 0; id < max_pun; id++)
+#ifdef CONFIG_SCSI_MULTI_LUN
+		for (lun = 0; lun < 8; lun++)
+#endif
+		{
+			probe_display(1);
+#ifdef IM_DEBUG_PROBE
+			printk(".");
+#endif
+			if (id != subsystem_pun(host_index)) {
+				/* if pun is not the adapter: */
+				/* set ldn=0 to pun,lun */
+				immediate_assign(host_index, id, lun, PROBE_LDN, SET_LDN);
+				if (device_inquiry(host_index, PROBE_LDN)) {	/* probe device */
+					get_scsi(host_index)[id][lun] = (unsigned char) (ld(host_index)[PROBE_LDN].buf[0]);
+					/* entry, even for NO_LUN */
+					if (ld(host_index)[PROBE_LDN].buf[0] != TYPE_NO_LUN)
+						count_devices++;	/* a existing device is found */
+				}
+				/* remove ldn */
+				immediate_assign(host_index, id, lun, PROBE_LDN, REMOVE_LDN);
+			}
+		}
+#ifndef IM_DEBUG_PROBE
+	printk("scanned,");
+#endif
+	/* STEP 3: */
+#ifdef IM_DEBUG_PROBE
+	printk("\nIBM MCA SCSI: Mapping SCSI-devices.");
+#endif
+	ldn = 0;
+	lun = 0;
+#ifdef CONFIG_SCSI_MULTI_LUN
+	for (lun = 0; lun < 8 && ldn < MAX_LOG_DEV; lun++)
+#endif
+		for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) {
+			probe_display(1);
+#ifdef IM_DEBUG_PROBE
+			printk(".");
+#endif
+			if (id != subsystem_pun(host_index)) {
+				if (get_scsi(host_index)[id][lun] != TYPE_NO_LUN && get_scsi(host_index)[id][lun] != TYPE_NO_DEVICE) {
+					/* Only map if accepted type. Always enter for
+					   lun == 0 to get no gaps into ldn-mapping for ldn<7. */
+					immediate_assign(host_index, id, lun, ldn, SET_LDN);
+					get_ldn(host_index)[id][lun] = ldn;	/* map ldn */
+					if (device_exists(host_index, ldn, &ld(host_index)[ldn].block_length, &ld(host_index)[ldn].device_type)) {
+#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET
+						printk("resetting device at ldn=%x ... ", ldn);
+						immediate_reset(host_index, ldn);
+#endif
+						ldn++;
+					} else {
+						/* device vanished, probably because we don't know how to
+						 * handle it or because it has problems */
+						if (lun > 0) {
+							/* remove mapping */
+							get_ldn(host_index)[id][lun] = TYPE_NO_DEVICE;
+							immediate_assign(host_index, 0, 0, ldn, REMOVE_LDN);
+						} else
+							ldn++;
+					}
+				} else if (lun == 0) {
+					/* map lun == 0, even if no device exists */
+					immediate_assign(host_index, id, lun, ldn, SET_LDN);
+					get_ldn(host_index)[id][lun] = ldn;	/* map ldn */
+					ldn++;
+				}
+			}
+		}
+	/* STEP 4: */
+
+	/* map remaining ldns to non-existing devices */
+	for (lun = 1; lun < 8 && ldn < MAX_LOG_DEV; lun++)
+		for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) {
+			if (get_scsi(host_index)[id][lun] == TYPE_NO_LUN || get_scsi(host_index)[id][lun] == TYPE_NO_DEVICE) {
+				probe_display(1);
+				/* Map remaining ldns only to NON-existing pun,lun
+				   combinations to make sure an inquiry will fail.
+				   For MULTI_LUN, it is needed to avoid adapter autonome
+				   SCSI-remapping. */
+				immediate_assign(host_index, id, lun, ldn, SET_LDN);
+				get_ldn(host_index)[id][lun] = ldn;
+				ldn++;
+			}
+		}
+#ifndef IM_DEBUG_PROBE
+	printk("mapped.");
+#endif
+	printk("\n");
+#ifdef IM_DEBUG_PROBE
+	if (ibm_ansi_order)
+		printk("IBM MCA SCSI: Device order: IBM/ANSI (pun=7 is first).\n");
+	else
+		printk("IBM MCA SCSI: Device order: New Industry Standard (pun=0 is first).\n");
+#endif
+
+#ifdef IM_DEBUG_PROBE
+	/* Show the physical and logical mapping during boot. */
+	printk("IBM MCA SCSI: Determined SCSI-device-mapping:\n");
+	printk("    Physical SCSI-Device Map               Logical SCSI-Device Map\n");
+	printk("ID\\LUN  0  1  2  3  4  5  6  7       ID\\LUN  0  1  2  3  4  5  6  7\n");
+	for (id = 0; id < max_pun; id++) {
+		printk("%2d     ", id);
+		for (lun = 0; lun < 8; lun++)
+			printk("%2s ", ti_p(get_scsi(host_index)[id][lun]));
+		printk("      %2d     ", id);
+		for (lun = 0; lun < 8; lun++)
+			printk("%2s ", ti_l(get_ldn(host_index)[id][lun]));
+		printk("\n");
+	}
+#endif
+
+	/* assign total number of found SCSI-devices to the statistics struct */
+	IBM_DS(host_index).total_scsi_devices = count_devices;
+
+	/* decide for output in /proc-filesystem, if the configuration of
+	   SCSI-devices makes dynamical reassignment of devices necessary */
+	if (count_devices >= MAX_LOG_DEV)
+		IBM_DS(host_index).dyn_flag = 1;	/* dynamical assignment is necessary */
+	else
+		IBM_DS(host_index).dyn_flag = 0;	/* dynamical assignment is not necessary */
+
+	/* If no SCSI-devices are assigned, return 1 in order to cause message. */
+	if (ldn == 0)
+		printk("IBM MCA SCSI: Warning: No SCSI-devices found/assigned!\n");
+
+	/* reset the counters for statistics on the current adapter */
+	IBM_DS(host_index).scbs = 0;
+	IBM_DS(host_index).long_scbs = 0;
+	IBM_DS(host_index).total_accesses = 0;
+	IBM_DS(host_index).total_interrupts = 0;
+	IBM_DS(host_index).dynamical_assignments = 0;
+	memset(IBM_DS(host_index).ldn_access, 0x0, sizeof(IBM_DS(host_index).ldn_access));
+	memset(IBM_DS(host_index).ldn_read_access, 0x0, sizeof(IBM_DS(host_index).ldn_read_access));
+	memset(IBM_DS(host_index).ldn_write_access, 0x0, sizeof(IBM_DS(host_index).ldn_write_access));
+	memset(IBM_DS(host_index).ldn_inquiry_access, 0x0, sizeof(IBM_DS(host_index).ldn_inquiry_access));
+	memset(IBM_DS(host_index).ldn_modeselect_access, 0x0, sizeof(IBM_DS(host_index).ldn_modeselect_access));
+	memset(IBM_DS(host_index).ldn_assignments, 0x0, sizeof(IBM_DS(host_index).ldn_assignments));
+	probe_display(0);
+	return;
+}
+
+static int device_exists(int host_index, int ldn, int *block_length, int *device_type)
+{
+	unsigned char *buf;
+	/* if no valid device found, return immediately with 0 */
+	if (!(device_inquiry(host_index, ldn)))
+		return 0;
+	buf = (unsigned char *) (&(ld(host_index)[ldn].buf));
+	if (*buf == TYPE_ROM) {
+		*device_type = TYPE_ROM;
+		*block_length = 2048;	/* (standard blocksize for yellow-/red-book) */
+		return 1;
+	}
+	if (*buf == TYPE_WORM) {
+		*device_type = TYPE_WORM;
+		*block_length = 2048;
+		return 1;
+	}
+	if (*buf == TYPE_DISK) {
+		*device_type = TYPE_DISK;
+		if (read_capacity(host_index, ldn)) {
+			*block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24);
+			return 1;
+		} else
+			return 0;
+	}
+	if (*buf == TYPE_MOD) {
+		*device_type = TYPE_MOD;
+		if (read_capacity(host_index, ldn)) {
+			*block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24);
+			return 1;
+		} else
+			return 0;
+	}
+	if (*buf == TYPE_TAPE) {
+		*device_type = TYPE_TAPE;
+		*block_length = 0;	/* not in use (setting by mt and mtst in op.) */
+		return 1;
+	}
+	if (*buf == TYPE_PROCESSOR) {
+		*device_type = TYPE_PROCESSOR;
+		*block_length = 0;	/* they set their stuff on drivers */
+		return 1;
+	}
+	if (*buf == TYPE_SCANNER) {
+		*device_type = TYPE_SCANNER;
+		*block_length = 0;	/* they set their stuff on drivers */
+		return 1;
+	}
+	if (*buf == TYPE_MEDIUM_CHANGER) {
+		*device_type = TYPE_MEDIUM_CHANGER;
+		*block_length = 0;	/* One never knows, what to expect on a medium
+					   changer device. */
+		return 1;
+	}
+	return 0;
+}
+
+static void internal_ibmmca_scsi_setup(char *str, int *ints)
+{
+	int i, j, io_base, id_base;
+	char *token;
+
+	io_base = 0;
+	id_base = 0;
+	if (str) {
+		j = 0;
+		while ((token = strsep(&str, ",")) != NULL) {
+			if (!strcmp(token, "activity"))
+				display_mode |= LED_ACTIVITY;
+			if (!strcmp(token, "display"))
+				display_mode |= LED_DISP;
+			if (!strcmp(token, "adisplay"))
+				display_mode |= LED_ADISP;
+			if (!strcmp(token, "normal"))
+				ibm_ansi_order = 0;
+			if (!strcmp(token, "ansi"))
+				ibm_ansi_order = 1;
+			if (!strcmp(token, "fast"))
+				global_adapter_speed = 0;
+			if (!strcmp(token, "medium"))
+				global_adapter_speed = 4;
+			if (!strcmp(token, "slow"))
+				global_adapter_speed = 7;
+			if ((*token == '-') || (isdigit(*token))) {
+				if (!(j % 2) && (io_base < IM_MAX_HOSTS))
+					io_port[io_base++] = simple_strtoul(token, NULL, 0);
+				if ((j % 2) && (id_base < IM_MAX_HOSTS))
+					scsi_id[id_base++] = simple_strtoul(token, NULL, 0);
+				j++;
+			}
+		}
+	} else if (ints) {
+		for (i = 0; i < IM_MAX_HOSTS && 2 * i + 2 < ints[0]; i++) {
+			io_port[i] = ints[2 * i + 2];
+			scsi_id[i] = ints[2 * i + 2];
+		}
+	}
+	return;
+}
+
+static int ibmmca_getinfo(char *buf, int slot, void *dev_id)
+{
+	struct Scsi_Host *shpnt;
+	int len, speciale, connectore, k;
+	unsigned int pos[8];
+	unsigned long flags;
+	struct Scsi_Host *dev = dev_id;
+
+	spin_lock_irqsave(dev->host_lock, flags);
+	
+	shpnt = dev;		/* assign host-structure to local pointer */
+	len = 0;		/* set filled text-buffer index to 0 */
+	/* get the _special contents of the hostdata structure */
+	speciale = ((struct ibmmca_hostdata *) shpnt->hostdata)->_special;
+	connectore = ((struct ibmmca_hostdata *) shpnt->hostdata)->_connector_size;
+	for (k = 2; k < 4; k++)
+		pos[k] = ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k];
+	if (speciale == FORCED_DETECTION) {	/* forced detection */
+		len += sprintf(buf + len,
+			       "Adapter category: forced detected\n" "***************************************\n" "***  Forced detected SCSI Adapter   ***\n" "***  No chip-information available  ***\n" "***************************************\n");
+	} else if (speciale == INTEGRATED_SCSI) {
+		/* if the integrated subsystem has been found automatically: */
+		len += sprintf(buf + len,
+			       "Adapter category: integrated\n" "Chip revision level: %d\n" "Chip status: %s\n" "8 kByte NVRAM status: %s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 1) ? "enabled" : "disabled", (pos[2] & 2) ? "locked" : "accessible");
+	} else if ((speciale >= 0) && (speciale < (sizeof(subsys_list) / sizeof(struct subsys_list_struct)))) {
+		/* if the subsystem is a slot adapter */
+		len += sprintf(buf + len, "Adapter category: slot-card\n" "ROM Segment Address: ");
+		if ((pos[2] & 0xf0) == 0xf0)
+			len += sprintf(buf + len, "off\n");
+		else
+			len += sprintf(buf + len, "0x%x\n", ((pos[2] & 0xf0) << 13) + 0xc0000);
+		len += sprintf(buf + len, "Chip status: %s\n", (pos[2] & 1) ? "enabled" : "disabled");
+		len += sprintf(buf + len, "Adapter I/O Offset: 0x%x\n", ((pos[2] & 0x0e) << 2));
+	} else {
+		len += sprintf(buf + len, "Adapter category: unknown\n");
+	}
+	/* common subsystem information to write to the slotn file */
+	len += sprintf(buf + len, "Subsystem PUN: %d\n", shpnt->this_id);
+	len += sprintf(buf + len, "I/O base address range: 0x%x-0x%x\n", (unsigned int) (shpnt->io_port), (unsigned int) (shpnt->io_port + 7));
+	len += sprintf(buf + len, "MCA-slot size: %d bits", connectore);
+	/* Now make sure, the bufferlength is devidable by 4 to avoid
+	 * paging problems of the buffer. */
+	while (len % sizeof(int) != (sizeof(int) - 1))
+		len += sprintf(buf + len, " ");
+	len += sprintf(buf + len, "\n");
+	
+	spin_unlock_irqrestore(shpnt->host_lock, flags);
+	
+	return len;
+}
+
+int ibmmca_detect(Scsi_Host_Template * scsi_template)
+{
+	struct Scsi_Host *shpnt;
+	int port, id, i, j, k, list_size, slot;
+	int devices_on_irq_11 = 0;
+	int devices_on_irq_14 = 0;
+	int IRQ14_registered = 0;
+	int IRQ11_registered = 0;
+
+	found = 0;		/* make absolutely sure, that found is set to 0 */
+
+	/* First of all, print the version number of the driver. This is
+	 * important to allow better user bugreports in case of already
+	 * having problems with the MCA_bus probing. */
+	printk(KERN_INFO "IBM MCA SCSI: Version %s\n", IBMMCA_SCSI_DRIVER_VERSION);
+	/* if this is not MCA machine, return "nothing found" */
+	if (!MCA_bus) {
+		printk(KERN_INFO "IBM MCA SCSI:  No Microchannel-bus present --> Aborting.\n" "      	     This machine does not have any IBM MCA-bus\n" "    	     or the MCA-Kernel-support is not enabled!\n");
+		return 0;
+	}
+
+#ifdef MODULE
+	/* If the driver is run as module, read from conf.modules or cmd-line */
+	if (boot_options)
+		option_setup(boot_options);
+#endif
+
+	/* get interrupt request level */
+	if (request_irq(IM_IRQ, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
+		printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ);
+		return 0;
+	} else
+		IRQ14_registered++;
+
+	/* if ibmmcascsi setup option was passed to kernel, return "found" */
+	for (i = 0; i < IM_MAX_HOSTS; i++)
+		if (io_port[i] > 0 && scsi_id[i] >= 0 && scsi_id[i] < 8) {
+			printk("IBM MCA SCSI: forced detected SCSI Adapter, io=0x%x, scsi id=%d.\n", io_port[i], scsi_id[i]);
+			if ((shpnt = ibmmca_register(scsi_template, io_port[i], scsi_id[i], FORCED_DETECTION, "forced detected SCSI Adapter"))) {
+				for (k = 2; k < 7; k++)
+					((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = 0;
+				((struct ibmmca_hostdata *) shpnt->hostdata)->_special = FORCED_DETECTION;
+				mca_set_adapter_name(MCA_INTEGSCSI, "forced detected SCSI Adapter");
+				mca_set_adapter_procfn(MCA_INTEGSCSI, (MCA_ProcFn) ibmmca_getinfo, shpnt);
+				mca_mark_as_used(MCA_INTEGSCSI);
+				devices_on_irq_14++;
+			}
+		}
+	if (found)
+		return found;
+
+	/* The POS2-register of all PS/2 model SCSI-subsystems has the following
+	 * interpretation of bits:
+	 *                             Bit 7 - 4 : Chip Revision ID (Release)
+	 *                             Bit 3 - 2 : Reserved
+	 *                             Bit 1     : 8k NVRAM Disabled
+	 *                             Bit 0     : Chip Enable (EN-Signal)
+	 * The POS3-register is interpreted as follows:
+	 *                             Bit 7 - 5 : SCSI ID
+	 *                             Bit 4     : Reserved = 0
+	 *                             Bit 3 - 0 : Reserved = 0
+	 * (taken from "IBM, PS/2 Hardware Interface Technical Reference, Common
+	 * Interfaces (1991)").
+	 * In short words, this means, that IBM PS/2 machines only support
+	 * 1 single subsystem by default. The slot-adapters must have another
+	 * configuration on pos2. Here, one has to assume the following
+	 * things for POS2-register:
+	 *                             Bit 7 - 4 : Chip Revision ID (Release)
+	 *                             Bit 3 - 1 : port offset factor
+	 *                             Bit 0     : Chip Enable (EN-Signal)
+	 * As I found a patch here, setting the IO-registers to 0x3540 forced,
+	 * as there was a 0x05 in POS2 on a model 56, I assume, that the
+	 * port 0x3540 must be fix for integrated SCSI-controllers.
+	 * Ok, this discovery leads to the following implementation: (M.Lang) */
+
+	/* first look for the IBM SCSI integrated subsystem on the motherboard */
+	for (j = 0; j < 8; j++)	/* read the pos-information */
+		pos[j] = mca_read_stored_pos(MCA_INTEGSCSI, j);
+	/* pos2 = pos3 = 0xff if there is no integrated SCSI-subsystem present, but
+	 * if we ignore the settings of all surrounding pos registers, it is not
+	 * completely sufficient to only check pos2 and pos3. */
+	/* Therefore, now the following if statement is used to
+	 * make sure, we see a real integrated onboard SCSI-interface and no
+	 * internal system information, which gets mapped to some pos registers
+	 * on models 95xx. */
+	if ((!pos[0] && !pos[1] && pos[2] > 0 && pos[3] > 0 && !pos[4] && !pos[5] && !pos[6] && !pos[7]) || (pos[0] == 0xff && pos[1] == 0xff && pos[2] < 0xff && pos[3] < 0xff && pos[4] == 0xff && pos[5] == 0xff && pos[6] == 0xff && pos[7] == 0xff)) {
+		if ((pos[2] & 1) == 1)	/* is the subsystem chip enabled ? */
+			port = IM_IO_PORT;
+		else {		/* if disabled, no IRQs will be generated, as the chip won't
+				 * listen to the incoming commands and will do really nothing,
+				 * except for listening to the pos-register settings. If this
+				 * happens, I need to hugely think about it, as one has to
+				 * write something to the MCA-Bus pos register in order to
+				 * enable the chip. Normally, IBM-SCSI won't pass the POST,
+				 * when the chip is disabled (see IBM tech. ref.). */
+			port = IM_IO_PORT;	/* anyway, set the portnumber and warn */
+			printk("IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n" "              SCSI-operations may not work.\n");
+		}
+		id = (pos[3] & 0xe0) >> 5;	/* this is correct and represents the PUN */
+		/* give detailed information on the subsystem. This helps me
+		 * additionally during debugging and analyzing bug-reports. */
+		printk(KERN_INFO "IBM MCA SCSI: IBM Integrated SCSI Controller ffound, io=0x%x, scsi id=%d,\n", port, id);
+		printk(KERN_INFO "              chip rev.=%d, 8K NVRAM=%s, subsystem=%s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 2) ? "locked" : "accessible", (pos[2] & 1) ? "enabled." : "disabled.");
+
+		/* register the found integrated SCSI-subsystem */
+		if ((shpnt = ibmmca_register(scsi_template, port, id, INTEGRATED_SCSI, "IBM Integrated SCSI Controller"))) 
+		{
+			for (k = 2; k < 7; k++)
+				((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k];
+			((struct ibmmca_hostdata *) shpnt->hostdata)->_special = INTEGRATED_SCSI;
+			mca_set_adapter_name(MCA_INTEGSCSI, "IBM Integrated SCSI Controller");
+			mca_set_adapter_procfn(MCA_INTEGSCSI, (MCA_ProcFn) ibmmca_getinfo, shpnt);
+			mca_mark_as_used(MCA_INTEGSCSI);
+			devices_on_irq_14++;
+		}
+	}
+
+	/* now look for other adapters in MCA slots, */
+	/* determine the number of known IBM-SCSI-subsystem types */
+	/* see the pos[2] dependence to get the adapter port-offset. */
+	list_size = sizeof(subsys_list) / sizeof(struct subsys_list_struct);
+	for (i = 0; i < list_size; i++) {
+		/* scan each slot for a fitting adapter id */
+		slot = 0;	/* start at slot 0 */
+		while ((slot = mca_find_adapter(subsys_list[i].mca_id, slot))
+		       != MCA_NOTFOUND) {	/* scan through all slots */
+			for (j = 0; j < 8; j++)	/* read the pos-information */
+				pos[j] = mca_read_stored_pos(slot, j);
+			if ((pos[2] & 1) == 1)
+				/* is the subsystem chip enabled ? */
+				/* (explanations see above) */
+				port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
+			else {
+				/* anyway, set the portnumber and warn */
+				port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
+				printk(KERN_WARNING "IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n");
+				printk(KERN_WARNING "              SCSI-operations may not work.\n");
+			}
+			if ((i == IBM_SCSI2_FW) && (pos[6] != 0)) {
+				printk(KERN_ERR "IBM MCA SCSI: ERROR - Wrong POS(6)-register setting!\n");
+				printk(KERN_ERR "              Impossible to determine adapter PUN!\n");
+				printk(KERN_ERR "              Guessing adapter PUN = 7.\n");
+				id = 7;
+			} else {
+				id = (pos[3] & 0xe0) >> 5;	/* get subsystem PUN */
+				if (i == IBM_SCSI2_FW) {
+					id |= (pos[3] & 0x10) >> 1;	/* get subsystem PUN high-bit
+									 * for F/W adapters */
+				}
+			}
+			if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0)) {
+				/* IRQ11 is used by SCSI-2 F/W Adapter/A */
+				printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
+				/* get interrupt request level */
+				if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts)) {
+					printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
+				} else
+					IRQ11_registered++;
+			}
+			printk(KERN_INFO "IBM MCA SCSI: %s found in slot %d, io=0x%x, scsi id=%d,\n", subsys_list[i].description, slot + 1, port, id);
+			if ((pos[2] & 0xf0) == 0xf0)
+				printk(KERN_DEBUG"              ROM Addr.=off,");
+			else
+				printk(KERN_DEBUG "              ROM Addr.=0x%x,", ((pos[2] & 0xf0) << 13) + 0xc0000);
+			printk(KERN_DEBUG " port-offset=0x%x, subsystem=%s\n", ((pos[2] & 0x0e) << 2), (pos[2] & 1) ? "enabled." : "disabled.");
+
+			/* register the hostadapter */
+			if ((shpnt = ibmmca_register(scsi_template, port, id, i, subsys_list[i].description))) {
+				for (k = 2; k < 8; k++)
+					((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k];
+				((struct ibmmca_hostdata *) shpnt->hostdata)->_special = i;
+				mca_set_adapter_name(slot, subsys_list[i].description);
+				mca_set_adapter_procfn(slot, (MCA_ProcFn) ibmmca_getinfo, shpnt);
+				mca_mark_as_used(slot);
+				if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0))
+					devices_on_irq_11++;
+				else
+					devices_on_irq_14++;
+			}
+			slot++;	/* advance to next slot */
+		}		/* advance to next adapter id in the list of IBM-SCSI-subsystems */
+	}
+
+	/* now check for SCSI-adapters, mapped to the integrated SCSI
+	 * area. E.g. a W/Cache in MCA-slot 9(!). Do the check correct here,
+	 * as this is a known effect on some models 95xx. */
+	list_size = sizeof(subsys_list) / sizeof(struct subsys_list_struct);
+	for (i = 0; i < list_size; i++) {
+		/* scan each slot for a fitting adapter id */
+		slot = mca_find_adapter(subsys_list[i].mca_id, MCA_INTEGSCSI);
+		if (slot != MCA_NOTFOUND) {	/* scan through all slots */
+			for (j = 0; j < 8; j++)	/* read the pos-information */
+				pos[j] = mca_read_stored_pos(slot, j);
+			if ((pos[2] & 1) == 1) {	/* is the subsystem chip enabled ? */
+				/* (explanations see above) */
+				port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
+			} else {	/* anyway, set the portnumber and warn */
+				port = IM_IO_PORT + ((pos[2] & 0x0e) << 2);
+				printk(KERN_WARNING "IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n");
+				printk(KERN_WARNING "              SCSI-operations may not work.\n");
+			}
+			if ((i == IBM_SCSI2_FW) && (pos[6] != 0)) {
+				printk(KERN_ERR "IBM MCA SCSI: ERROR - Wrong POS(6)-register setting!\n");
+				printk(KERN_ERR  "              Impossible to determine adapter PUN!\n");
+				printk(KERN_ERR "              Guessing adapter PUN = 7.\n");
+				id = 7;
+			} else {
+				id = (pos[3] & 0xe0) >> 5;	/* get subsystem PUN */
+				if (i == IBM_SCSI2_FW)
+					id |= (pos[3] & 0x10) >> 1;	/* get subsystem PUN high-bit
+									 * for F/W adapters */
+			}
+			if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0)) {
+				/* IRQ11 is used by SCSI-2 F/W Adapter/A */
+				printk(KERN_DEBUG  "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n");
+				/* get interrupt request level */
+				if (request_irq(IM_IRQ_FW, interrupt_handler, SA_SHIRQ, "ibmmcascsi", hosts))
+					printk(KERN_ERR "IBM MCA SCSI: Unable to get shared IRQ %d.\n", IM_IRQ_FW);
+				else
+					IRQ11_registered++;
+			}
+			printk(KERN_INFO "IBM MCA SCSI: %s found in slot %d, io=0x%x, scsi id=%d,\n", subsys_list[i].description, slot + 1, port, id);
+			if ((pos[2] & 0xf0) == 0xf0)
+				printk(KERN_DEBUG "              ROM Addr.=off,");
+			else
+				printk(KERN_DEBUG "              ROM Addr.=0x%x,", ((pos[2] & 0xf0) << 13) + 0xc0000);
+			printk(KERN_DEBUG " port-offset=0x%x, subsystem=%s\n", ((pos[2] & 0x0e) << 2), (pos[2] & 1) ? "enabled." : "disabled.");
+
+			/* register the hostadapter */
+			if ((shpnt = ibmmca_register(scsi_template, port, id, i, subsys_list[i].description))) {
+				for (k = 2; k < 7; k++)
+					((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k];
+				((struct ibmmca_hostdata *) shpnt->hostdata)->_special = i;
+				mca_set_adapter_name(slot, subsys_list[i].description);
+				mca_set_adapter_procfn(slot, (MCA_ProcFn) ibmmca_getinfo, shpnt);
+				mca_mark_as_used(slot);
+				if ((i == IBM_SCSI2_FW) && (pos[4] & 0x01) && (pos[6] == 0))
+					devices_on_irq_11++;
+				else
+					devices_on_irq_14++;
+			}
+			slot++;	/* advance to next slot */
+		}		/* advance to next adapter id in the list of IBM-SCSI-subsystems */
+	}
+	if (IRQ11_registered && !devices_on_irq_11)
+		free_irq(IM_IRQ_FW, hosts);	/* no devices on IRQ 11 */
+	if (IRQ14_registered && !devices_on_irq_14)
+		free_irq(IM_IRQ, hosts);	/* no devices on IRQ 14 */
+	if (!devices_on_irq_11 && !devices_on_irq_14)
+		printk(KERN_WARNING "IBM MCA SCSI: No IBM SCSI-subsystem adapter attached.\n");
+	return found;		/* return the number of found SCSI hosts. Should be 1 or 0. */
+}
+
+static struct Scsi_Host *ibmmca_register(Scsi_Host_Template * scsi_template, int port, int id, int adaptertype, char *hostname)
+{
+	struct Scsi_Host *shpnt;
+	int i, j;
+	unsigned int ctrl;
+
+	/* check I/O region */
+	if (!request_region(port, IM_N_IO_PORT, hostname)) {
+		printk(KERN_ERR "IBM MCA SCSI: Unable to get I/O region 0x%x-0x%x (%d ports).\n", port, port + IM_N_IO_PORT - 1, IM_N_IO_PORT);
+		return NULL;
+	}
+
+	/* register host */
+	shpnt = scsi_register(scsi_template, sizeof(struct ibmmca_hostdata));
+	if (!shpnt) {
+		printk(KERN_ERR "IBM MCA SCSI: Unable to register host.\n");
+		release_region(port, IM_N_IO_PORT);
+		return NULL;
+	}
+
+	/* request I/O region */
+	hosts[found] = shpnt;	/* add new found hostadapter to the list */
+	special(found) = adaptertype;	/* important assignment or else crash! */
+	subsystem_connector_size(found) = 0;	/* preset slot-size */
+	shpnt->irq = IM_IRQ;	/* assign necessary stuff for the adapter */
+	shpnt->io_port = port;
+	shpnt->n_io_port = IM_N_IO_PORT;
+	shpnt->this_id = id;
+	shpnt->max_id = 8;	/* 8 PUNs are default */
+	/* now, the SCSI-subsystem is connected to Linux */
+
+	ctrl = (unsigned int) (inb(IM_CTR_REG(found)));	/* get control-register status */
+#ifdef IM_DEBUG_PROBE
+	printk("IBM MCA SCSI: Control Register contents: %x, status: %x\n", ctrl, inb(IM_STAT_REG(found)));
+	printk("IBM MCA SCSI: This adapters' POS-registers: ");
+	for (i = 0; i < 8; i++)
+		printk("%x ", pos[i]);
+	printk("\n");
+#endif
+	reset_status(found) = IM_RESET_NOT_IN_PROGRESS;
+
+	for (i = 0; i < 16; i++)	/* reset the tables */
+		for (j = 0; j < 8; j++)
+			get_ldn(found)[i][j] = MAX_LOG_DEV;
+
+	/* check which logical devices exist */
+	/* after this line, local interrupting is possible: */
+	local_checking_phase_flag(found) = 1;
+	check_devices(found, adaptertype);	/* call by value, using the global variable hosts */
+	local_checking_phase_flag(found) = 0;
+	found++;		/* now increase index to be prepared for next found subsystem */
+	/* an ibm mca subsystem has been detected */
+	return shpnt;
+}
+
+static int ibmmca_release(struct Scsi_Host *shpnt)
+{
+	release_region(shpnt->io_port, shpnt->n_io_port);
+	if (!(--found))
+		free_irq(shpnt->irq, hosts);
+	return 0;
+}
+
+/* The following routine is the SCSI command queue for the midlevel driver */
+static int ibmmca_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+{
+	unsigned int ldn;
+	unsigned int scsi_cmd;
+	struct im_scb *scb;
+	struct Scsi_Host *shpnt;
+	int current_ldn;
+	int id, lun;
+	int target;
+	int host_index;
+	int max_pun;
+	int i;
+	struct scatterlist *sl;
+
+	shpnt = cmd->device->host;
+	/* search for the right hostadapter */
+	for (host_index = 0; hosts[host_index] && hosts[host_index]->host_no != shpnt->host_no; host_index++);
+
+	if (!hosts[host_index]) {	/* invalid hostadapter descriptor address */
+		cmd->result = DID_NO_CONNECT << 16;
+		if (done)
+			done(cmd);
+		return 0;
+	}
+	max_pun = subsystem_maxid(host_index);
+	if (ibm_ansi_order) {
+		target = max_pun - 1 - cmd->device->id;
+		if ((target <= subsystem_pun(host_index)) && (cmd->device->id <= subsystem_pun(host_index)))
+			target--;
+		else if ((target >= subsystem_pun(host_index)) && (cmd->device->id >= subsystem_pun(host_index)))
+			target++;
+	} else
+		target = cmd->device->id;
+
+	/* if (target,lun) is NO LUN or not existing at all, return error */
+	if ((get_scsi(host_index)[target][cmd->device->lun] == TYPE_NO_LUN) || (get_scsi(host_index)[target][cmd->device->lun] == TYPE_NO_DEVICE)) {
+		cmd->result = DID_NO_CONNECT << 16;
+		if (done)
+			done(cmd);
+		return 0;
+	}
+
+	/*if (target,lun) unassigned, do further checks... */
+	ldn = get_ldn(host_index)[target][cmd->device->lun];
+	if (ldn >= MAX_LOG_DEV) {	/* on invalid ldn do special stuff */
+		if (ldn > MAX_LOG_DEV) {	/* dynamical remapping if ldn unassigned */
+			current_ldn = next_ldn(host_index);	/* stop-value for one circle */
+			while (ld(host_index)[next_ldn(host_index)].cmd) {	/* search for a occupied, but not in */
+				/* command-processing ldn. */
+				next_ldn(host_index)++;
+				if (next_ldn(host_index) >= MAX_LOG_DEV)
+					next_ldn(host_index) = 7;
+				if (current_ldn == next_ldn(host_index)) {	/* One circle done ? */
+					/* no non-processing ldn found */
+					printk("IBM MCA SCSI: Cannot assign SCSI-device dynamically!\n" "              On ldn 7-14 SCSI-commands everywhere in progress.\n" "              Reporting DID_NO_CONNECT for device (%d,%d).\n", target, cmd->device->lun);
+					cmd->result = DID_NO_CONNECT << 16;	/* return no connect */
+					if (done)
+						done(cmd);
+					return 0;
+				}
+			}
+
+			/* unmap non-processing ldn */
+			for (id = 0; id < max_pun; id++)
+				for (lun = 0; lun < 8; lun++) {
+					if (get_ldn(host_index)[id][lun] == next_ldn(host_index)) {
+						get_ldn(host_index)[id][lun] = TYPE_NO_DEVICE;
+						get_scsi(host_index)[id][lun] = TYPE_NO_DEVICE;
+						/* unmap entry */
+					}
+				}
+			/* set reduced interrupt_handler-mode for checking */
+			local_checking_phase_flag(host_index) = 1;
+			/* map found ldn to pun,lun */
+			get_ldn(host_index)[target][cmd->device->lun] = next_ldn(host_index);
+			/* change ldn to the right value, that is now next_ldn */
+			ldn = next_ldn(host_index);
+			/* unassign all ldns (pun,lun,ldn does not matter for remove) */
+			immediate_assign(host_index, 0, 0, 0, REMOVE_LDN);
+			/* set only LDN for remapped device */
+			immediate_assign(host_index, target, cmd->device->lun, ldn, SET_LDN);
+			/* get device information for ld[ldn] */
+			if (device_exists(host_index, ldn, &ld(host_index)[ldn].block_length, &ld(host_index)[ldn].device_type)) {
+				ld(host_index)[ldn].cmd = NULL;	/* To prevent panic set 0, because
+								   devices that were not assigned,
+								   should have nothing in progress. */
+				get_scsi(host_index)[target][cmd->device->lun] = ld(host_index)[ldn].device_type;
+				/* increase assignment counters for statistics in /proc */
+				IBM_DS(host_index).dynamical_assignments++;
+				IBM_DS(host_index).ldn_assignments[ldn]++;
+			} else
+				/* panic here, because a device, found at boottime has
+				   vanished */
+				panic("IBM MCA SCSI: ldn=0x%x, SCSI-device on (%d,%d) vanished!\n", ldn, target, cmd->device->lun);
+			/* unassign again all ldns (pun,lun,ldn does not matter for remove) */
+			immediate_assign(host_index, 0, 0, 0, REMOVE_LDN);
+			/* remap all ldns, as written in the pun/lun table */
+			lun = 0;
+#ifdef CONFIG_SCSI_MULTI_LUN
+			for (lun = 0; lun < 8; lun++)
+#endif
+				for (id = 0; id < max_pun; id++) {
+					if (get_ldn(host_index)[id][lun] <= MAX_LOG_DEV)
+						immediate_assign(host_index, id, lun, get_ldn(host_index)[id][lun], SET_LDN);
+				}
+			/* set back to normal interrupt_handling */
+			local_checking_phase_flag(host_index) = 0;
+#ifdef IM_DEBUG_PROBE
+			/* Information on syslog terminal */
+			printk("IBM MCA SCSI: ldn=0x%x dynamically reassigned to (%d,%d).\n", ldn, target, cmd->device->lun);
+#endif
+			/* increase next_ldn for next dynamical assignment */
+			next_ldn(host_index)++;
+			if (next_ldn(host_index) >= MAX_LOG_DEV)
+				next_ldn(host_index) = 7;
+		} else {	/* wall against Linux accesses to the subsystem adapter */
+			cmd->result = DID_BAD_TARGET << 16;
+			if (done)
+				done(cmd);
+			return 0;
+		}
+	}
+
+	/*verify there is no command already in progress for this log dev */
+	if (ld(host_index)[ldn].cmd)
+		panic("IBM MCA SCSI: cmd already in progress for this ldn.\n");
+
+	/*save done in cmd, and save cmd for the interrupt handler */
+	cmd->scsi_done = done;
+	ld(host_index)[ldn].cmd = cmd;
+
+	/*fill scb information independent of the scsi command */
+	scb = &(ld(host_index)[ldn].scb);
+	ld(host_index)[ldn].tsb.dev_status = 0;
+	scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE;
+	scb->tsb_adr = isa_virt_to_bus(&(ld(host_index)[ldn].tsb));
+	scsi_cmd = cmd->cmnd[0];
+
+	if (cmd->use_sg) {
+		i = cmd->use_sg;
+		sl = (struct scatterlist *) (cmd->request_buffer);
+		if (i > 16)
+			panic("IBM MCA SCSI: scatter-gather list too long.\n");
+		while (--i >= 0) {
+			ld(host_index)[ldn].sge[i].address = (void *) (isa_page_to_bus(sl[i].page) + sl[i].offset);
+			ld(host_index)[ldn].sge[i].byte_length = sl[i].length;
+		}
+		scb->enable |= IM_POINTER_TO_LIST;
+		scb->sys_buf_adr = isa_virt_to_bus(&(ld(host_index)[ldn].sge[0]));
+		scb->sys_buf_length = cmd->use_sg * sizeof(struct im_sge);
+	} else {
+		scb->sys_buf_adr = isa_virt_to_bus(cmd->request_buffer);
+		/* recent Linux midlevel SCSI places 1024 byte for inquiry
+		 * command. Far too much for old PS/2 hardware. */
+		switch (scsi_cmd) {
+			/* avoid command errors by setting bufferlengths to
+			 * ANSI-standard. Beware of forcing it to 255,
+			 * this could SEGV the kernel!!! */
+		case INQUIRY:
+		case REQUEST_SENSE:
+		case MODE_SENSE:
+		case MODE_SELECT:
+			if (cmd->request_bufflen > 255)
+				scb->sys_buf_length = 255;
+			else
+				scb->sys_buf_length = cmd->request_bufflen;
+			break;
+		case TEST_UNIT_READY:
+			scb->sys_buf_length = 0;
+			break;
+		default:
+			scb->sys_buf_length = cmd->request_bufflen;
+			break;
+		}
+	}
+	/*fill scb information dependent on scsi command */
+
+#ifdef IM_DEBUG_CMD
+	printk("issue scsi cmd=%02x to ldn=%d\n", scsi_cmd, ldn);
+#endif
+
+	/* for specific device-type debugging: */
+#ifdef IM_DEBUG_CMD_SPEC_DEV
+	if (ld(host_index)[ldn].device_type == IM_DEBUG_CMD_DEVICE)
+		printk("(SCSI-device-type=0x%x) issue scsi cmd=%02x to ldn=%d\n", ld(host_index)[ldn].device_type, scsi_cmd, ldn);
+#endif
+
+	/* for possible panics store current command */
+	last_scsi_command(host_index)[ldn] = scsi_cmd;
+	last_scsi_type(host_index)[ldn] = IM_SCB;
+	/* update statistical info */
+	IBM_DS(host_index).total_accesses++;
+	IBM_DS(host_index).ldn_access[ldn]++;
+
+	switch (scsi_cmd) {
+	case READ_6:
+	case WRITE_6:
+	case READ_10:
+	case WRITE_10:
+	case READ_12:
+	case WRITE_12:
+		/* Distinguish between disk and other devices. Only disks (that are the
+		   most frequently accessed devices) should be supported by the
+		   IBM-SCSI-Subsystem commands. */
+		switch (ld(host_index)[ldn].device_type) {
+		case TYPE_DISK:	/* for harddisks enter here ... */
+		case TYPE_MOD:	/* ... try it also for MO-drives (send flames as */
+			/*     you like, if this won't work.) */
+			if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) {
+				/* read command preparations */
+				scb->enable |= IM_READ_CONTROL;
+				IBM_DS(host_index).ldn_read_access[ldn]++;	/* increase READ-access on ldn stat. */
+				scb->command = IM_READ_DATA_CMD | IM_NO_DISCONNECT;
+			} else {	/* write command preparations */
+				IBM_DS(host_index).ldn_write_access[ldn]++;	/* increase write-count on ldn stat. */
+				scb->command = IM_WRITE_DATA_CMD | IM_NO_DISCONNECT;
+			}
+			if (scsi_cmd == READ_6 || scsi_cmd == WRITE_6) {
+				scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[3]) << 0) | (((unsigned) cmd->cmnd[2]) << 8) | ((((unsigned) cmd->cmnd[1]) & 0x1f) << 16);
+				scb->u2.blk.count = (unsigned) cmd->cmnd[4];
+			} else {
+				scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[5]) << 0) | (((unsigned) cmd->cmnd[4]) << 8) | (((unsigned) cmd->cmnd[3]) << 16) | (((unsigned) cmd->cmnd[2]) << 24);
+				scb->u2.blk.count = (((unsigned) cmd->cmnd[8]) << 0) | (((unsigned) cmd->cmnd[7]) << 8);
+			}
+			last_scsi_logical_block(host_index)[ldn] = scb->u1.log_blk_adr;
+			last_scsi_blockcount(host_index)[ldn] = scb->u2.blk.count;
+			scb->u2.blk.length = ld(host_index)[ldn].block_length;
+			break;
+			/* for other devices, enter here. Other types are not known by
+			   Linux! TYPE_NO_LUN is forbidden as valid device. */
+		case TYPE_ROM:
+		case TYPE_TAPE:
+		case TYPE_PROCESSOR:
+		case TYPE_WORM:
+		case TYPE_SCANNER:
+		case TYPE_MEDIUM_CHANGER:
+			/* If there is a sequential-device, IBM recommends to use
+			   IM_OTHER_SCSI_CMD_CMD instead of subsystem READ/WRITE.
+			   This includes CD-ROM devices, too, due to the partial sequential
+			   read capabilities. */
+			scb->command = IM_OTHER_SCSI_CMD_CMD;
+			if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12)
+				/* enable READ */
+				scb->enable |= IM_READ_CONTROL;
+			scb->enable |= IM_BYPASS_BUFFER;
+			scb->u1.scsi_cmd_length = cmd->cmd_len;
+			memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len);
+			last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
+			/* Read/write on this non-disk devices is also displayworthy,
+			   so flash-up the LED/display. */
+			break;
+		}
+		break;
+	case INQUIRY:
+		IBM_DS(host_index).ldn_inquiry_access[ldn]++;
+		scb->command = IM_DEVICE_INQUIRY_CMD;
+		scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
+		scb->u1.log_blk_adr = 0;
+		break;
+	case TEST_UNIT_READY:
+		scb->command = IM_OTHER_SCSI_CMD_CMD;
+		scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
+		scb->u1.log_blk_adr = 0;
+		scb->u1.scsi_cmd_length = 6;
+		memcpy(scb->u2.scsi_command, cmd->cmnd, 6);
+		last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
+		break;
+	case READ_CAPACITY:
+		/* the length of system memory buffer must be exactly 8 bytes */
+		scb->command = IM_READ_CAPACITY_CMD;
+		scb->enable |= IM_READ_CONTROL | IM_BYPASS_BUFFER;
+		if (scb->sys_buf_length > 8)
+			scb->sys_buf_length = 8;
+		break;
+		/* Commands that need read-only-mode (system <- device): */
+	case REQUEST_SENSE:
+		scb->command = IM_REQUEST_SENSE_CMD;
+		scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
+		break;
+		/* Commands that need write-only-mode (system -> device): */
+	case MODE_SELECT:
+	case MODE_SELECT_10:
+		IBM_DS(host_index).ldn_modeselect_access[ldn]++;
+		scb->command = IM_OTHER_SCSI_CMD_CMD;
+		scb->enable |= IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;	/*Select needs WRITE-enabled */
+		scb->u1.scsi_cmd_length = cmd->cmd_len;
+		memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len);
+		last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
+		break;
+		/* For other commands, read-only is useful. Most other commands are
+		   running without an input-data-block. */
+	default:
+		scb->command = IM_OTHER_SCSI_CMD_CMD;
+		scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER;
+		scb->u1.scsi_cmd_length = cmd->cmd_len;
+		memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len);
+		last_scsi_type(host_index)[ldn] = IM_LONG_SCB;
+		break;
+	}
+	/*issue scb command, and return */
+	if (++disk_rw_in_progress == 1)
+		PS2_DISK_LED_ON(shpnt->host_no, target);
+
+	if (last_scsi_type(host_index)[ldn] == IM_LONG_SCB) {
+		issue_cmd(host_index, isa_virt_to_bus(scb), IM_LONG_SCB | ldn);
+		IBM_DS(host_index).long_scbs++;
+	} else {
+		issue_cmd(host_index, isa_virt_to_bus(scb), IM_SCB | ldn);
+		IBM_DS(host_index).scbs++;
+	}
+	return 0;
+}
+
+static int ibmmca_abort(Scsi_Cmnd * cmd)
+{
+	/* Abort does not work, as the adapter never generates an interrupt on
+	 * whatever situation is simulated, even when really pending commands
+	 * are running on the adapters' hardware ! */
+
+	struct Scsi_Host *shpnt;
+	unsigned int ldn;
+	void (*saved_done) (Scsi_Cmnd *);
+	int target;
+	int host_index;
+	int max_pun;
+	unsigned long imm_command;
+
+#ifdef IM_DEBUG_PROBE
+	printk("IBM MCA SCSI: Abort subroutine called...\n");
+#endif
+
+	shpnt = cmd->device->host;
+	/* search for the right hostadapter */
+	for (host_index = 0; hosts[host_index] && hosts[host_index]->host_no != shpnt->host_no; host_index++);
+
+	if (!hosts[host_index]) {	/* invalid hostadapter descriptor address */
+		cmd->result = DID_NO_CONNECT << 16;
+		if (cmd->scsi_done)
+			(cmd->scsi_done) (cmd);
+		shpnt = cmd->device->host;
+#ifdef IM_DEBUG_PROBE
+		printk(KERN_DEBUG "IBM MCA SCSI: Abort adapter selection failed!\n");
+#endif
+		return SUCCESS;
+	}
+	max_pun = subsystem_maxid(host_index);
+	if (ibm_ansi_order) {
+		target = max_pun - 1 - cmd->device->id;
+		if ((target <= subsystem_pun(host_index)) && (cmd->device->id <= subsystem_pun(host_index)))
+			target--;
+		else if ((target >= subsystem_pun(host_index)) && (cmd->device->id >= subsystem_pun(host_index)))
+			target++;
+	} else
+		target = cmd->device->id;
+
+	/* get logical device number, and disable system interrupts */
+	printk(KERN_WARNING "IBM MCA SCSI: Sending abort to device pun=%d, lun=%d.\n", target, cmd->device->lun);
+	ldn = get_ldn(host_index)[target][cmd->device->lun];
+
+	/*if cmd for this ldn has already finished, no need to abort */
+	if (!ld(host_index)[ldn].cmd) {
+		    return SUCCESS;
+	}
+
+	/* Clear ld.cmd, save done function, install internal done,
+	 * send abort immediate command (this enables sys. interrupts),
+	 * and wait until the interrupt arrives.
+	 */
+	saved_done = cmd->scsi_done;
+	cmd->scsi_done = internal_done;
+	cmd->SCp.Status = 0;
+	last_scsi_command(host_index)[ldn] = IM_ABORT_IMM_CMD;
+	last_scsi_type(host_index)[ldn] = IM_IMM_CMD;
+	imm_command = inl(IM_CMD_REG(host_index));
+	imm_command &= (unsigned long) (0xffff0000);	/* mask reserved stuff */
+	imm_command |= (unsigned long) (IM_ABORT_IMM_CMD);
+	/* must wait for attention reg not busy */
+	/* FIXME - timeout, politeness */
+	while (1) {
+		if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
+			break;
+	}
+	/* write registers and enable system interrupts */
+	outl(imm_command, IM_CMD_REG(host_index));
+	outb(IM_IMM_CMD | ldn, IM_ATTN_REG(host_index));
+#ifdef IM_DEBUG_PROBE
+	printk("IBM MCA SCSI: Abort queued to adapter...\n");
+#endif
+	spin_unlock_irq(shpnt->host_lock);
+	while (!cmd->SCp.Status)
+		yield();
+	spin_lock_irq(shpnt->host_lock);
+	cmd->scsi_done = saved_done;
+#ifdef IM_DEBUG_PROBE
+	printk("IBM MCA SCSI: Abort returned with adapter response...\n");
+#endif
+
+	/*if abort went well, call saved done, then return success or error */
+	if (cmd->result == (DID_ABORT << 16)) 
+	{
+		cmd->result |= DID_ABORT << 16;
+		if (cmd->scsi_done)
+			(cmd->scsi_done) (cmd);
+		ld(host_index)[ldn].cmd = NULL;
+#ifdef IM_DEBUG_PROBE
+		printk("IBM MCA SCSI: Abort finished with success.\n");
+#endif
+		return SUCCESS;
+	} else {
+		cmd->result |= DID_NO_CONNECT << 16;
+		if (cmd->scsi_done)
+			(cmd->scsi_done) (cmd);
+		ld(host_index)[ldn].cmd = NULL;
+#ifdef IM_DEBUG_PROBE
+		printk("IBM MCA SCSI: Abort failed.\n");
+#endif
+		return FAILED;
+	}
+}
+
+static int ibmmca_host_reset(Scsi_Cmnd * cmd)
+{
+	struct Scsi_Host *shpnt;
+	Scsi_Cmnd *cmd_aid;
+	int ticks, i;
+	int host_index;
+	unsigned long imm_command;
+
+	if (cmd == NULL)
+		BUG();
+
+	ticks = IM_RESET_DELAY * HZ;
+	shpnt = cmd->device->host;
+	/* search for the right hostadapter */
+	for (host_index = 0; hosts[host_index] && hosts[host_index]->host_no != shpnt->host_no; host_index++);
+
+	if (!hosts[host_index])	/* invalid hostadapter descriptor address */
+		return FAILED;
+
+	if (local_checking_phase_flag(host_index)) {
+		printk(KERN_WARNING "IBM MCA SCSI: unable to reset while checking devices.\n");
+		return FAILED;
+	}
+
+	/* issue reset immediate command to subsystem, and wait for interrupt */
+	printk("IBM MCA SCSI: resetting all devices.\n");
+	reset_status(host_index) = IM_RESET_IN_PROGRESS;
+	last_scsi_command(host_index)[0xf] = IM_RESET_IMM_CMD;
+	last_scsi_type(host_index)[0xf] = IM_IMM_CMD;
+	imm_command = inl(IM_CMD_REG(host_index));
+	imm_command &= (unsigned long) (0xffff0000);	/* mask reserved stuff */
+	imm_command |= (unsigned long) (IM_RESET_IMM_CMD);
+	/* must wait for attention reg not busy */
+	while (1) {
+		if (!(inb(IM_STAT_REG(host_index)) & IM_BUSY))
+			break;
+		spin_unlock_irq(shpnt->host_lock);
+		yield();
+		spin_lock_irq(shpnt->host_lock);
+	}
+	/*write registers and enable system interrupts */
+	outl(imm_command, IM_CMD_REG(host_index));
+	outb(IM_IMM_CMD | 0xf, IM_ATTN_REG(host_index));
+	/* wait for interrupt finished or intr_stat register to be set, as the
+	 * interrupt will not be executed, while we are in here! */
+	 
+	/* FIXME: This is really really icky we so want a sleeping version of this ! */
+	while (reset_status(host_index) == IM_RESET_IN_PROGRESS && --ticks && ((inb(IM_INTR_REG(host_index)) & 0x8f) != 0x8f)) {
+		udelay((1 + 999 / HZ) * 1000);
+		barrier();
+	}
+	/* if reset did not complete, just return an error */
+	if (!ticks) {
+		printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY);
+		reset_status(host_index) = IM_RESET_FINISHED_FAIL;
+		return FAILED;
+	}
+
+	if ((inb(IM_INTR_REG(host_index)) & 0x8f) == 0x8f) {
+		/* analysis done by this routine and not by the intr-routine */
+		if (inb(IM_INTR_REG(host_index)) == 0xaf)
+			reset_status(host_index) = IM_RESET_FINISHED_OK_NO_INT;
+		else if (inb(IM_INTR_REG(host_index)) == 0xcf)
+			reset_status(host_index) = IM_RESET_FINISHED_FAIL;
+		else		/* failed, 4get it */
+			reset_status(host_index) = IM_RESET_NOT_IN_PROGRESS_NO_INT;
+		outb(IM_EOI | 0xf, IM_ATTN_REG(host_index));
+	}
+
+	/* if reset failed, just return an error */
+	if (reset_status(host_index) == IM_RESET_FINISHED_FAIL) {
+		printk(KERN_ERR "IBM MCA SCSI: reset failed.\n");
+		return FAILED;
+	}
+
+	/* so reset finished ok - call outstanding done's, and return success */
+	printk(KERN_INFO "IBM MCA SCSI: Reset successfully completed.\n");
+	for (i = 0; i < MAX_LOG_DEV; i++) {
+		cmd_aid = ld(host_index)[i].cmd;
+		if (cmd_aid && cmd_aid->scsi_done) {
+			ld(host_index)[i].cmd = NULL;
+			cmd_aid->result = DID_RESET << 16;
+		}
+	}
+	return SUCCESS;
+}
+
+static int ibmmca_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *info)
+{
+	int size = capacity;
+	info[0] = 64;
+	info[1] = 32;
+	info[2] = size / (info[0] * info[1]);
+	if (info[2] >= 1024) {
+		info[0] = 128;
+		info[1] = 63;
+		info[2] = size / (info[0] * info[1]);
+		if (info[2] >= 1024) {
+			info[0] = 255;
+			info[1] = 63;
+			info[2] = size / (info[0] * info[1]);
+			if (info[2] >= 1024)
+				info[2] = 1023;
+		}
+	}
+	return 0;
+}
+
+/* calculate percentage of total accesses on a ldn */
+static int ldn_access_load(int host_index, int ldn)
+{
+	if (IBM_DS(host_index).total_accesses == 0)
+		return (0);
+	if (IBM_DS(host_index).ldn_access[ldn] == 0)
+		return (0);
+	return (IBM_DS(host_index).ldn_access[ldn] * 100) / IBM_DS(host_index).total_accesses;
+}
+
+/* calculate total amount of r/w-accesses */
+static int ldn_access_total_read_write(int host_index)
+{
+	int a;
+	int i;
+
+	a = 0;
+	for (i = 0; i <= MAX_LOG_DEV; i++)
+		a += IBM_DS(host_index).ldn_read_access[i] + IBM_DS(host_index).ldn_write_access[i];
+	return (a);
+}
+
+static int ldn_access_total_inquiry(int host_index)
+{
+	int a;
+	int i;
+
+	a = 0;
+	for (i = 0; i <= MAX_LOG_DEV; i++)
+		a += IBM_DS(host_index).ldn_inquiry_access[i];
+	return (a);
+}
+
+static int ldn_access_total_modeselect(int host_index)
+{
+	int a;
+	int i;
+
+	a = 0;
+	for (i = 0; i <= MAX_LOG_DEV; i++)
+		a += IBM_DS(host_index).ldn_modeselect_access[i];
+	return (a);
+}
+
+/* routine to display info in the proc-fs-structure (a deluxe feature) */
+static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout)
+{
+	int len = 0;
+	int i, id, lun, host_index;
+	unsigned long flags;
+	int max_pun;
+
+	for (i = 0; hosts[i] && hosts[i] != shpnt; i++);
+	
+	spin_lock_irqsave(hosts[i]->host_lock, flags);	/* Check it */
+	host_index = i;
+	if (!shpnt) {
+		len += sprintf(buffer + len, "\nIBM MCA SCSI: Can't find adapter for host number %d\n",
+				shpnt->host_no);
+		return len;
+	}
+	max_pun = subsystem_maxid(host_index);
+
+	len += sprintf(buffer + len, "\n             IBM-SCSI-Subsystem-Linux-Driver, Version %s\n\n\n", IBMMCA_SCSI_DRIVER_VERSION);
+	len += sprintf(buffer + len, " SCSI Access-Statistics:\n");
+	len += sprintf(buffer + len, "               Device Scanning Order....: %s\n", (ibm_ansi_order) ? "IBM/ANSI" : "New Industry Standard");
+#ifdef CONFIG_SCSI_MULTI_LUN
+	len += sprintf(buffer + len, "               Multiple LUN probing.....: Yes\n");
+#else
+	len += sprintf(buffer + len, "               Multiple LUN probing.....: No\n");
+#endif
+	len += sprintf(buffer + len, "               This Hostnumber..........: %d\n", shpnt->host_no);
+	len += sprintf(buffer + len, "               Base I/O-Port............: 0x%x\n", (unsigned int) (IM_CMD_REG(host_index)));
+	len += sprintf(buffer + len, "               (Shared) IRQ.............: %d\n", IM_IRQ);
+	len += sprintf(buffer + len, "               Total Interrupts.........: %d\n", IBM_DS(host_index).total_interrupts);
+	len += sprintf(buffer + len, "               Total SCSI Accesses......: %d\n", IBM_DS(host_index).total_accesses);
+	len += sprintf(buffer + len, "               Total short SCBs.........: %d\n", IBM_DS(host_index).scbs);
+	len += sprintf(buffer + len, "               Total long SCBs..........: %d\n", IBM_DS(host_index).long_scbs);
+	len += sprintf(buffer + len, "                 Total SCSI READ/WRITE..: %d\n", ldn_access_total_read_write(host_index));
+	len += sprintf(buffer + len, "                 Total SCSI Inquiries...: %d\n", ldn_access_total_inquiry(host_index));
+	len += sprintf(buffer + len, "                 Total SCSI Modeselects.: %d\n", ldn_access_total_modeselect(host_index));
+	len += sprintf(buffer + len, "                 Total SCSI other cmds..: %d\n", IBM_DS(host_index).total_accesses - ldn_access_total_read_write(host_index)
+		       - ldn_access_total_modeselect(host_index)
+		       - ldn_access_total_inquiry(host_index));
+	len += sprintf(buffer + len, "               Total SCSI command fails.: %d\n\n", IBM_DS(host_index).total_errors);
+	len += sprintf(buffer + len, " Logical-Device-Number (LDN) Access-Statistics:\n");
+	len += sprintf(buffer + len, "         LDN | Accesses [%%] |   READ    |   WRITE   | ASSIGNMENTS\n");
+	len += sprintf(buffer + len, "        -----|--------------|-----------|-----------|--------------\n");
+	for (i = 0; i <= MAX_LOG_DEV; i++)
+		len += sprintf(buffer + len, "         %2X  |    %3d       |  %8d |  %8d | %8d\n", i, ldn_access_load(host_index, i), IBM_DS(host_index).ldn_read_access[i], IBM_DS(host_index).ldn_write_access[i], IBM_DS(host_index).ldn_assignments[i]);
+	len += sprintf(buffer + len, "        -----------------------------------------------------------\n\n");
+	len += sprintf(buffer + len, " Dynamical-LDN-Assignment-Statistics:\n");
+	len += sprintf(buffer + len, "               Number of physical SCSI-devices..: %d (+ Adapter)\n", IBM_DS(host_index).total_scsi_devices);
+	len += sprintf(buffer + len, "               Dynamical Assignment necessary...: %s\n", IBM_DS(host_index).dyn_flag ? "Yes" : "No ");
+	len += sprintf(buffer + len, "               Next LDN to be assigned..........: 0x%x\n", next_ldn(host_index));
+	len += sprintf(buffer + len, "               Dynamical assignments done yet...: %d\n", IBM_DS(host_index).dynamical_assignments);
+	len += sprintf(buffer + len, "\n Current SCSI-Device-Mapping:\n");
+	len += sprintf(buffer + len, "        Physical SCSI-Device Map               Logical SCSI-Device Map\n");
+	len += sprintf(buffer + len, "    ID\\LUN  0  1  2  3  4  5  6  7       ID\\LUN  0  1  2  3  4  5  6  7\n");
+	for (id = 0; id < max_pun; id++) {
+		len += sprintf(buffer + len, "    %2d     ", id);
+		for (lun = 0; lun < 8; lun++)
+			len += sprintf(buffer + len, "%2s ", ti_p(get_scsi(host_index)[id][lun]));
+		len += sprintf(buffer + len, "      %2d     ", id);
+		for (lun = 0; lun < 8; lun++)
+			len += sprintf(buffer + len, "%2s ", ti_l(get_ldn(host_index)[id][lun]));
+		len += sprintf(buffer + len, "\n");
+	}
+
+	len += sprintf(buffer + len, "(A = IBM-Subsystem, D = Harddisk, T = Tapedrive, P = Processor, W = WORM,\n");
+	len += sprintf(buffer + len, " R = CD-ROM, S = Scanner, M = MO-Drive, C = Medium-Changer, + = unprovided LUN,\n");
+	len += sprintf(buffer + len, " - = nothing found, nothing assigned or unprobed LUN)\n\n");
+
+	*start = buffer + offset;
+	len -= offset;
+	if (len > length)
+		len = length;
+	spin_unlock_irqrestore(shpnt->host_lock, flags);
+	return len;
+}
+
+static int option_setup(char *str)
+{
+	int ints[IM_MAX_HOSTS];
+	char *cur = str;
+	int i = 1;
+
+	while (cur && isdigit(*cur) && i <= IM_MAX_HOSTS) {
+		ints[i++] = simple_strtoul(cur, NULL, 0);
+		if ((cur = strchr(cur, ',')) != NULL)
+			cur++;
+	}
+	ints[0] = i - 1;
+	internal_ibmmca_scsi_setup(cur, ints);
+	return 0;
+}
+
+__setup("ibmmcascsi=", option_setup);
+
+static Scsi_Host_Template driver_template = {
+          .proc_name      = "ibmmca",
+	  .proc_info	  = ibmmca_proc_info,
+          .name           = "IBM SCSI-Subsystem",
+          .detect         = ibmmca_detect,
+          .release        = ibmmca_release,
+          .queuecommand   = ibmmca_queuecommand,
+	  .eh_abort_handler = ibmmca_abort,
+	  .eh_host_reset_handler = ibmmca_host_reset,
+          .bios_param     = ibmmca_biosparam,
+          .can_queue      = 16,
+          .this_id        = 7,
+          .sg_tablesize   = 16,
+          .cmd_per_lun    = 1,
+          .use_clustering = ENABLE_CLUSTERING,
+};
+#include "scsi_module.c"