diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
new file mode 100644
index 0000000..3da5494
--- /dev/null
+++ b/drivers/serial/crisv10.c
@@ -0,0 +1,5059 @@
+/* $Id: serial.c,v 1.25 2004/09/29 10:33:49 starvik Exp $
+ *
+ * Serial port driver for the ETRAX 100LX chip
+ *
+ *    Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003  Axis Communications AB
+ *
+ *    Many, many authors. Based once upon a time on serial.c for 16x50.
+ *
+ * $Log: serial.c,v $
+ * Revision 1.25  2004/09/29 10:33:49  starvik
+ * Resolved a dealock when printing debug from kernel.
+ *
+ * Revision 1.24  2004/08/27 23:25:59  johana
+ * rs_set_termios() must call change_speed() if c_iflag has changed or
+ * automatic XOFF handling will be enabled and transmitter will stop
+ * if 0x13 is received.
+ *
+ * Revision 1.23  2004/08/24 06:57:13  starvik
+ * More whitespace cleanup
+ *
+ * Revision 1.22  2004/08/24 06:12:20  starvik
+ * Whitespace cleanup
+ *
+ * Revision 1.20  2004/05/24 12:00:20  starvik
+ * Big merge of stuff from Linux 2.4 (e.g. manual mode for the serial port).
+ *
+ * Revision 1.19  2004/05/17 13:12:15  starvik
+ * Kernel console hook
+ * Big merge from Linux 2.4 still pending.
+ *
+ * Revision 1.18  2003/10/28 07:18:30  starvik
+ * Compiles with debug info
+ *
+ * Revision 1.17  2003/07/04 08:27:37  starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.16  2003/06/13 10:05:19  johana
+ * Help the user to avoid trouble by:
+ * Forcing mixed mode for status/control lines if not all pins are used.
+ *
+ * Revision 1.15  2003/06/13 09:43:01  johana
+ * Merged in the following changes from os/linux/arch/cris/drivers/serial.c
+ * + some minor changes to reduce diff.
+ *
+ * Revision 1.49  2003/05/30 11:31:54  johana
+ * Merged in change-branch--serial9bit that adds CMSPAR support for sticky
+ * parity (mark/space)
+ *
+ * Revision 1.48  2003/05/30 11:03:57  johana
+ * Implemented rs_send_xchar() by disabling the DMA and writing manually.
+ * Added e100_disable_txdma_channel() and e100_enable_txdma_channel().
+ * Fixed rs_throttle() and rs_unthrottle() to properly call rs_send_xchar
+ * instead of setting info->x_char and check the CRTSCTS flag before
+ * controlling the rts pin.
+ *
+ * Revision 1.14  2003/04/09 08:12:44  pkj
+ * Corrected typo changes made upstream.
+ *
+ * Revision 1.13  2003/04/09 05:20:47  starvik
+ * Merge of Linux 2.5.67
+ *
+ * Revision 1.11  2003/01/22 06:48:37  starvik
+ * Fixed warnings issued by GCC 3.2.1
+ *
+ * Revision 1.9  2002/12/13 09:07:47  starvik
+ * Alert user that RX_TIMEOUT_TICKS==0 doesn't work
+ *
+ * Revision 1.8  2002/12/11 13:13:57  starvik
+ * Added arch/ to v10 specific includes
+ * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+ *
+ * Revision 1.7  2002/12/06 07:13:57  starvik
+ * Corrected work queue stuff
+ * Removed CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
+ *
+ * Revision 1.6  2002/11/21 07:17:46  starvik
+ * Change static inline to extern inline where otherwise outlined with gcc-3.2
+ *
+ * Revision 1.5  2002/11/14 15:59:49  starvik
+ * Linux 2.5 port of the latest serial driver from 2.4. The work queue stuff
+ * probably doesn't work yet.
+ *
+ * Revision 1.42  2002/11/05 09:08:47  johana
+ * Better implementation of rs_stop() and rs_start() that uses the XOFF
+ * register to start/stop transmission.
+ * change_speed() also initilises XOFF register correctly so that
+ * auto_xoff is enabled when IXON flag is set by user.
+ * This gives fast XOFF response times.
+ *
+ * Revision 1.41  2002/11/04 18:40:57  johana
+ * Implemented rs_stop() and rs_start().
+ * Simple tests using hwtestserial indicates that this should be enough
+ * to make it work.
+ *
+ * Revision 1.40  2002/10/14 05:33:18  starvik
+ * RS-485 uses fast timers even if SERIAL_FAST_TIMER is disabled
+ *
+ * Revision 1.39  2002/09/30 21:00:57  johana
+ * Support for CONFIG_ETRAX_SERx_DTR_RI_DSR_CD_MIXED where the status and
+ * control pins can be mixed between PA and PB.
+ * If no serial port uses MIXED old solution is used
+ * (saves a few bytes and cycles).
+ * control_pins struct uses masks instead of bit numbers.
+ * Corrected dummy values and polarity in line_info() so
+ * /proc/tty/driver/serial is now correct.
+ * (the E100_xxx_GET() macros is really active low - perhaps not obvious)
+ *
+ * Revision 1.38  2002/08/23 11:01:36  starvik
+ * Check that serial port is enabled in all interrupt handlers to avoid
+ * restarts of DMA channels not assigned to serial ports
+ *
+ * Revision 1.37  2002/08/13 13:02:37  bjornw
+ * Removed some warnings because of unused code
+ *
+ * Revision 1.36  2002/08/08 12:50:01  starvik
+ * Serial interrupt is shared with synchronous serial port driver
+ *
+ * Revision 1.35  2002/06/03 10:40:49  starvik
+ * Increased RS-485 RTS toggle timer to 2 characters
+ *
+ * Revision 1.34  2002/05/28 18:59:36  johana
+ * Whitespace and comment fixing to be more like etrax100ser.c 1.71.
+ *
+ * Revision 1.33  2002/05/28 17:55:43  johana
+ * RS-485 uses FAST_TIMER if enabled, and starts a short (one char time)
+ * timer from tranismit_chars (interrupt context).
+ * The timer toggles RTS in interrupt context when expired giving minimum
+ * latencies.
+ *
+ * Revision 1.32  2002/05/22 13:58:00  johana
+ * Renamed rs_write() to raw_write() and made it inline.
+ * New rs_write() handles RS-485 if configured and enabled
+ * (moved code from e100_write_rs485()).
+ * RS-485 ioctl's uses copy_from_user() instead of verify_area().
+ *
+ * Revision 1.31  2002/04/22 11:20:03  johana
+ * Updated copyright years.
+ *
+ * Revision 1.30  2002/04/22 09:39:12  johana
+ * RS-485 support compiles.
+ *
+ * Revision 1.29  2002/01/14 16:10:01  pkj
+ * Allocate the receive buffers dynamically. The static 4kB buffer was
+ * too small for the peaks. This means that we can get rid of the extra
+ * buffer and the copying to it. It also means we require less memory
+ * under normal operations, but can use more when needed (there is a
+ * cap at 64kB for safety reasons). If there is no memory available
+ * we panic(), and die a horrible death...
+ *
+ * Revision 1.28  2001/12/18 15:04:53  johana
+ * Cleaned up write_rs485() - now it works correctly without padding extra
+ * char.
+ * Added sane default initialisation of rs485.
+ * Added #ifdef around dummy variables.
+ *
+ * Revision 1.27  2001/11/29 17:00:41  pkj
+ * 2kB seems to be too small a buffer when using 921600 bps,
+ * so increase it to 4kB (this was already done for the elinux
+ * version of the serial driver).
+ *
+ * Revision 1.26  2001/11/19 14:20:41  pkj
+ * Minor changes to comments and unused code.
+ *
+ * Revision 1.25  2001/11/12 20:03:43  pkj
+ * Fixed compiler warnings.
+ *
+ * Revision 1.24  2001/11/12 15:10:05  pkj
+ * Total redesign of the receiving part of the serial driver.
+ * Uses eight chained descriptors to write to a 4kB buffer.
+ * This data is then serialised into a 2kB buffer. From there it
+ * is copied into the TTY's flip buffers when they become available.
+ * A lot of copying, and the sizes of the buffers might need to be
+ * tweaked, but all in all it should work better than the previous
+ * version, without the need to modify the TTY code in any way.
+ * Also note that erroneous bytes are now correctly marked in the
+ * flag buffers (instead of always marking the first byte).
+ *
+ * Revision 1.23  2001/10/30 17:53:26  pkj
+ * * Set info->uses_dma to 0 when a port is closed.
+ * * Mark the timer1 interrupt as a fast one (SA_INTERRUPT).
+ * * Call start_flush_timer() in start_receive() if
+ *   CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is defined.
+ *
+ * Revision 1.22  2001/10/30 17:44:03  pkj
+ * Use %lu for received and transmitted counters in line_info().
+ *
+ * Revision 1.21  2001/10/30 17:40:34  pkj
+ * Clean-up. The only change to functionality is that
+ * CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS(=5) is used instead of
+ * MAX_FLUSH_TIME(=8).
+ *
+ * Revision 1.20  2001/10/30 15:24:49  johana
+ * Added char_time stuff from 2.0 driver.
+ *
+ * Revision 1.19  2001/10/30 15:23:03  johana
+ * Merged with 1.13.2 branch + fixed indentation
+ * and changed CONFIG_ETRAX100_XYS to CONFIG_ETRAX_XYZ
+ *
+ * Revision 1.18  2001/09/24 09:27:22  pkj
+ * Completed ext_baud_table[] in cflag_to_baud() and cflag_to_etrax_baud().
+ *
+ * Revision 1.17  2001/08/24 11:32:49  ronny
+ * More fixes for the CONFIG_ETRAX_SERIAL_PORT0 define.
+ *
+ * Revision 1.16  2001/08/24 07:56:22  ronny
+ * Added config ifdefs around ser0 irq requests.
+ *
+ * Revision 1.15  2001/08/16 09:10:31  bjarne
+ * serial.c - corrected the initialization of rs_table, the wrong defines
+ *            where used.
+ *            Corrected a test in timed_flush_handler.
+ *            Changed configured to enabled.
+ * serial.h - Changed configured to enabled.
+ *
+ * Revision 1.14  2001/08/15 07:31:23  bjarne
+ * Introduced two new members to the e100_serial struct.
+ * configured - Will be set to 1 if the port has been configured in .config
+ * uses_dma   - Should be set to 1 if the port uses DMA. Currently it is set
+ *              to 1
+ *              when a port is opened. This is used to limit the DMA interrupt
+ *              routines to only manipulate DMA channels actually used by the
+ *              serial driver.
+ *
+ * Revision 1.13.2.2  2001/10/17 13:57:13  starvik
+ * Receiver was broken by the break fixes
+ *
+ * Revision 1.13.2.1  2001/07/20 13:57:39  ronny
+ * Merge with new stuff from etrax100ser.c. Works but haven't checked stuff
+ * like break handling.
+ *
+ * Revision 1.13  2001/05/09 12:40:31  johana
+ * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h
+ *
+ * Revision 1.12  2001/04/19 12:23:07  bjornw
+ * CONFIG_RS485 -> CONFIG_ETRAX_RS485
+ *
+ * Revision 1.11  2001/04/05 14:29:48  markusl
+ * Updated according to review remarks i.e.
+ * -Use correct types in port structure to avoid compiler warnings
+ * -Try to use IO_* macros whenever possible
+ * -Open should never return -EBUSY
+ *
+ * Revision 1.10  2001/03/05 13:14:07  bjornw
+ * Another spelling fix
+ *
+ * Revision 1.9  2001/02/23 13:46:38  bjornw
+ * Spellling check
+ *
+ * Revision 1.8  2001/01/23 14:56:35  markusl
+ * Made use of ser1 optional
+ * Needed by USB
+ *
+ * Revision 1.7  2001/01/19 16:14:48  perf
+ * Added kernel options for serial ports 234.
+ * Changed option names from CONFIG_ETRAX100_XYZ to CONFIG_ETRAX_XYZ.
+ *
+ * Revision 1.6  2000/11/22 16:36:09  bjornw
+ * Please marketing by using the correct case when spelling Etrax.
+ *
+ * Revision 1.5  2000/11/21 16:43:37  bjornw
+ * Fixed so it compiles under CONFIG_SVINTO_SIM
+ *
+ * Revision 1.4  2000/11/15 17:34:12  bjornw
+ * Added a timeout timer for flushing input channels. The interrupt-based
+ * fast flush system should be easy to merge with this later (works the same
+ * way, only with an irq instead of a system timer_list)
+ *
+ * Revision 1.3  2000/11/13 17:19:57  bjornw
+ * * Incredibly, this almost complete rewrite of serial.c worked (at least
+ *   for output) the first time.
+ *
+ *   Items worth noticing:
+ *
+ *      No Etrax100 port 1 workarounds (does only compile on 2.4 anyway now)
+ *      RS485 is not ported (why can't it be done in userspace as on x86 ?)
+ *      Statistics done through async_icount - if any more stats are needed,
+ *      that's the place to put them or in an arch-dep version of it.
+ *      timeout_interrupt and the other fast timeout stuff not ported yet
+ *      There be dragons in this 3k+ line driver
+ *
+ * Revision 1.2  2000/11/10 16:50:28  bjornw
+ * First shot at a 2.4 port, does not compile totally yet
+ *
+ * Revision 1.1  2000/11/10 16:47:32  bjornw
+ * Added verbatim copy of rev 1.49 etrax100ser.c from elinux
+ *
+ * Revision 1.49  2000/10/30 15:47:14  tobiasa
+ * Changed version number.
+ *
+ * Revision 1.48  2000/10/25 11:02:43  johana
+ * Changed %ul to %lu in printf's
+ *
+ * Revision 1.47  2000/10/18 15:06:53  pkj
+ * Compile correctly with CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST and
+ * CONFIG_ETRAX_SERIAL_PROC_ENTRY together.
+ * Some clean-up of the /proc/serial file.
+ *
+ * Revision 1.46  2000/10/16 12:59:40  johana
+ * Added CONFIG_ETRAX_SERIAL_PROC_ENTRY for statistics and debug info.
+ *
+ * Revision 1.45  2000/10/13 17:10:59  pkj
+ * Do not flush DMAs while flipping TTY buffers.
+ *
+ * Revision 1.44  2000/10/13 16:34:29  pkj
+ * Added a delay in ser_interrupt() for 2.3ms when an error is detected.
+ * We do not know why this delay is required yet, but without it the
+ * irmaflash program does not work (this was the program that needed
+ * the ser_interrupt() to be needed in the first place). This should not
+ * affect normal use of the serial ports.
+ *
+ * Revision 1.43  2000/10/13 16:30:44  pkj
+ * New version of the fast flush of serial buffers code. This time
+ * it is localized to the serial driver and uses a fast timer to
+ * do the work.
+ *
+ * Revision 1.42  2000/10/13 14:54:26  bennyo
+ * Fix for switching RTS when using rs485
+ *
+ * Revision 1.41  2000/10/12 11:43:44  pkj
+ * Cleaned up a number of comments.
+ *
+ * Revision 1.40  2000/10/10 11:58:39  johana
+ * Made RS485 support generic for all ports.
+ * Toggle rts in interrupt if no delay wanted.
+ * WARNING: No true transmitter empty check??
+ * Set d_wait bit when sending data so interrupt is delayed until
+ * fifo flushed. (Fix tcdrain() problem)
+ *
+ * Revision 1.39  2000/10/04 16:08:02  bjornw
+ * * Use virt_to_phys etc. for DMA addresses
+ * * Removed CONFIG_FLUSH_DMA_FAST hacks
+ * * Indentation fix
+ *
+ * Revision 1.38  2000/10/02 12:27:10  mattias
+ * * added variable used when using fast flush on serial dma.
+ *   (CONFIG_FLUSH_DMA_FAST)
+ *
+ * Revision 1.37  2000/09/27 09:44:24  pkj
+ * Uncomment definition of SERIAL_HANDLE_EARLY_ERRORS.
+ *
+ * Revision 1.36  2000/09/20 13:12:52  johana
+ * Support for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS:
+ *   Number of timer ticks between flush of receive fifo (1 tick = 10ms).
+ *   Try 0-3 for low latency applications. Approx 5 for high load
+ *   applications (e.g. PPP). Maybe this should be more adaptive some day...
+ *
+ * Revision 1.35  2000/09/20 10:36:08  johana
+ * Typo in get_lsr_info()
+ *
+ * Revision 1.34  2000/09/20 10:29:59  johana
+ * Let rs_chars_in_buffer() check fifo content as well.
+ * get_lsr_info() might work now (not tested).
+ * Easier to change the port to debug.
+ *
+ * Revision 1.33  2000/09/13 07:52:11  torbjore
+ * Support RS485
+ *
+ * Revision 1.32  2000/08/31 14:45:37  bjornw
+ * After sending a break we need to reset the transmit DMA channel
+ *
+ * Revision 1.31  2000/06/21 12:13:29  johana
+ * Fixed wait for all chars sent when closing port.
+ * (Used to always take 1 second!)
+ * Added shadows for directions of status/ctrl signals.
+ *
+ * Revision 1.30  2000/05/29 16:27:55  bjornw
+ * Simulator ifdef moved a bit
+ *
+ * Revision 1.29  2000/05/09 09:40:30  mattias
+ * * Added description of dma registers used in timeout_interrupt
+ * * Removed old code
+ *
+ * Revision 1.28  2000/05/08 16:38:58  mattias
+ * * Bugfix for flushing fifo in timeout_interrupt
+ *   Problem occurs when bluetooth stack waits for a small number of bytes
+ *   containing an event acknowledging free buffers in bluetooth HW
+ *   As before, data was stuck in fifo until more data came on uart and
+ *   flushed it up to the stack.
+ *
+ * Revision 1.27  2000/05/02 09:52:28  jonasd
+ * Added fix for peculiar etrax behaviour when eop is forced on an empty
+ * fifo. This is used when flashing the IRMA chip. Disabled by default.
+ *
+ * Revision 1.26  2000/03/29 15:32:02  bjornw
+ * 2.0.34 updates
+ *
+ * Revision 1.25  2000/02/16 16:59:36  bjornw
+ * * Receive DMA directly into the flip-buffer, eliminating an intermediary
+ *   receive buffer and a memcpy. Will avoid some overruns.
+ * * Error message on debug port if an overrun or flip buffer overrun occurs.
+ * * Just use the first byte in the flag flip buffer for errors.
+ * * Check for timeout on the serial ports only each 5/100 s, not 1/100.
+ *
+ * Revision 1.24  2000/02/09 18:02:28  bjornw
+ * * Clear serial errors (overrun, framing, parity) correctly. Before, the
+ *   receiver would get stuck if an error occurred and we did not restart
+ *   the input DMA.
+ * * Cosmetics (indentation, some code made into inlines)
+ * * Some more debug options
+ * * Actually shut down the serial port (DMA irq, DMA reset, receiver stop)
+ *   when the last open is closed. Corresponding fixes in startup().
+ * * rs_close() "tx FIFO wait" code moved into right place, bug & -> && fixed
+ *   and make a special case out of port 1 (R_DMA_CHx_STATUS is broken for that)
+ * * e100_disable_rx/enable_rx just disables/enables the receiver, not RTS
+ *
+ * Revision 1.23  2000/01/24 17:46:19  johana
+ * Wait for flush of DMA/FIFO when closing port.
+ *
+ * Revision 1.22  2000/01/20 18:10:23  johana
+ * Added TIOCMGET ioctl to return modem status.
+ * Implemented modem status/control that works with the extra signals
+ * (DTR, DSR, RI,CD) as well.
+ * 3 different modes supported:
+ * ser0 on PB (Bundy), ser1 on PB (Lisa) and ser2 on PA (Bundy)
+ * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when
+ * closing the last filehandle, NASTY!.
+ * Added break generation, not tested though!
+ * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1.
+ * You can't use them at the same time (yet..), but you can hopefully switch
+ * between ser2/par0, ser3/par1 with the same kernel config.
+ * Replaced some magic constants with defines
+ *
+ *
+ */
+
+static char *serial_version = "$Revision: 1.25 $";
+
+#include <linux/config.h>
+#include <linux/version.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/kernel.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <linux/delay.h>
+
+#include <asm/arch/svinto.h>
+
+/* non-arch dependent serial structures are in linux/serial.h */
+#include <linux/serial.h>
+/* while we keep our own stuff (struct e100_serial) in a local .h file */
+#include "serial.h"
+#include <asm/fasttimer.h>
+
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+#ifndef CONFIG_ETRAX_FAST_TIMER
+#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER"
+#endif
+#endif
+
+#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \
+           (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0)
+#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1"
+#endif
+
+#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G"
+#endif
+
+/*
+ * All of the compatibilty code so we can compile serial.c against
+ * older kernels is hidden in serial_compat.h
+ */
+#if defined(LOCAL_HEADERS)
+#include "serial_compat.h"
+#endif
+
+#define _INLINE_ inline
+
+struct tty_driver *serial_driver;
+
+/* serial subtype definitions */
+#ifndef SERIAL_TYPE_NORMAL
+#define SERIAL_TYPE_NORMAL	1
+#endif
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+//#define SERIAL_DEBUG_INTR
+//#define SERIAL_DEBUG_OPEN
+//#define SERIAL_DEBUG_FLOW
+//#define SERIAL_DEBUG_DATA
+//#define SERIAL_DEBUG_THROTTLE
+//#define SERIAL_DEBUG_IO  /* Debug for Extra control and status pins */
+//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */
+
+/* Enable this to use serial interrupts to handle when you
+   expect the first received event on the serial port to
+   be an error, break or similar. Used to be able to flash IRMA
+   from eLinux */
+#define SERIAL_HANDLE_EARLY_ERRORS
+
+/* Defined and used in n_tty.c, but we need it here as well */
+#define TTY_THRESHOLD_THROTTLE 128
+
+/* Due to buffersizes and threshold values, our SERIAL_DESCR_BUF_SIZE
+ * must not be to high or flow control won't work if we leave it to the tty
+ * layer so we have our own throttling in flush_to_flip
+ * TTY_FLIPBUF_SIZE=512,
+ * TTY_THRESHOLD_THROTTLE/UNTHROTTLE=128
+ * BUF_SIZE can't be > 128
+ */
+/* Currently 16 descriptors x 128 bytes = 2048 bytes */
+#define SERIAL_DESCR_BUF_SIZE 256
+
+#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */
+#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE
+
+/* We don't want to load the system with massive fast timer interrupt
+ * on high baudrates so limit it to 250 us (4kHz) */
+#define MIN_FLUSH_TIME_USEC 250
+
+/* Add an x here to log a lot of timer stuff */
+#define TIMERD(x)
+/* Debug details of interrupt handling */
+#define DINTR1(x)  /* irq on/off, errors */
+#define DINTR2(x)    /* tx and rx */
+/* Debug flip buffer stuff */
+#define DFLIP(x)
+/* Debug flow control and overview of data flow */
+#define DFLOW(x)
+#define DBAUD(x)
+#define DLOG_INT_TRIG(x)
+
+//#define DEBUG_LOG_INCLUDED
+#ifndef DEBUG_LOG_INCLUDED
+#define DEBUG_LOG(line, string, value)
+#else
+struct debug_log_info
+{
+	unsigned long time;
+	unsigned long timer_data;
+//  int line;
+	const char *string;
+	int value;
+};
+#define DEBUG_LOG_SIZE 4096
+
+struct debug_log_info debug_log[DEBUG_LOG_SIZE];
+int debug_log_pos = 0;
+
+#define DEBUG_LOG(_line, _string, _value) do { \
+  if ((_line) == SERIAL_DEBUG_LINE) {\
+    debug_log_func(_line, _string, _value); \
+  }\
+}while(0)
+
+void debug_log_func(int line, const char *string, int value)
+{
+	if (debug_log_pos < DEBUG_LOG_SIZE) {
+		debug_log[debug_log_pos].time = jiffies;
+		debug_log[debug_log_pos].timer_data = *R_TIMER_DATA;
+//    debug_log[debug_log_pos].line = line;
+		debug_log[debug_log_pos].string = string;
+		debug_log[debug_log_pos].value = value;
+		debug_log_pos++;
+	}
+	/*printk(string, value);*/
+}
+#endif
+
+#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS
+/* Default number of timer ticks before flushing rx fifo
+ * When using "little data, low latency applications: use 0
+ * When using "much data applications (PPP)" use ~5
+ */
+#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5
+#endif
+
+unsigned long timer_data_to_ns(unsigned long timer_data);
+
+static void change_speed(struct e100_serial *info);
+static void rs_throttle(struct tty_struct * tty);
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
+static int rs_write(struct tty_struct * tty, int from_user,
+                    const unsigned char *buf, int count);
+extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user,
+                            const unsigned char *buf, int count);
+#ifdef CONFIG_ETRAX_RS485
+static int e100_write_rs485(struct tty_struct * tty, int from_user,
+                            const unsigned char *buf, int count);
+#endif
+static int get_lsr_info(struct e100_serial * info, unsigned int *value);
+
+
+#define DEF_BAUD 115200   /* 115.2 kbit/s */
+#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define DEF_RX 0x20  /* or SERIAL_CTRL_W >> 8 */
+/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */
+#define DEF_TX 0x80  /* or SERIAL_CTRL_B */
+
+/* offsets from R_SERIALx_CTRL */
+
+#define REG_DATA 0
+#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */
+#define REG_TR_DATA 0
+#define REG_STATUS 1
+#define REG_TR_CTRL 1
+#define REG_REC_CTRL 2
+#define REG_BAUD 3
+#define REG_XOFF 4  /* this is a 32 bit register */
+
+/* The bitfields are the same for all serial ports */
+#define SER_RXD_MASK         IO_MASK(R_SERIAL0_STATUS, rxd)
+#define SER_DATA_AVAIL_MASK  IO_MASK(R_SERIAL0_STATUS, data_avail)
+#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err)
+#define SER_PAR_ERR_MASK     IO_MASK(R_SERIAL0_STATUS, par_err)
+#define SER_OVERRUN_MASK     IO_MASK(R_SERIAL0_STATUS, overrun)
+
+#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK)
+
+/* Values for info->errorcode */
+#define ERRCODE_SET_BREAK    (TTY_BREAK)
+#define ERRCODE_INSERT        0x100
+#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK)
+
+#define FORCE_EOP(info)  *R_SET_EOP = 1U << info->iseteop;
+
+/*
+ * General note regarding the use of IO_* macros in this file:
+ *
+ * We will use the bits defined for DMA channel 6 when using various
+ * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are
+ * the same for all channels (which of course they are).
+ *
+ * We will also use the bits defined for serial port 0 when writing commands
+ * to the different ports, as these bits too are the same for all ports.
+ */
+
+
+/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */
+static const unsigned long e100_ser_int_mask = 0
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready)
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready)
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready)
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready)
+#endif
+;
+unsigned long r_alt_ser_baudrate_shadow = 0;
+
+/* this is the data for the four serial ports in the etrax100 */
+/*  DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */
+/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */
+
+static struct e100_serial rs_table[] = {
+	{ .baud        = DEF_BAUD,
+	  .port        = (unsigned char *)R_SERIAL0_CTRL,
+	  .irq         = 1U << 12, /* uses DMA 6 and 7 */
+	  .oclrintradr = R_DMA_CH6_CLR_INTR,
+	  .ofirstadr   = R_DMA_CH6_FIRST,
+	  .ocmdadr     = R_DMA_CH6_CMD,
+	  .ostatusadr  = R_DMA_CH6_STATUS,
+	  .iclrintradr = R_DMA_CH7_CLR_INTR,
+	  .ifirstadr   = R_DMA_CH7_FIRST,
+	  .icmdadr     = R_DMA_CH7_CMD,
+	  .idescradr   = R_DMA_CH7_DESCR,
+	  .flags       = STD_FLAGS,
+	  .rx_ctrl     = DEF_RX,
+	  .tx_ctrl     = DEF_TX,
+	  .iseteop     = 2,
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+          .enabled  = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+	  .dma_out_enabled = 1,
+#else
+	  .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+	  .dma_in_enabled = 1,
+#else
+	  .dma_in_enabled = 0
+#endif
+#else
+          .enabled  = 0,
+	  .dma_out_enabled = 0,
+	  .dma_in_enabled = 0
+#endif
+
+},  /* ttyS0 */
+#ifndef CONFIG_SVINTO_SIM
+	{ .baud        = DEF_BAUD,
+	  .port        = (unsigned char *)R_SERIAL1_CTRL,
+	  .irq         = 1U << 16, /* uses DMA 8 and 9 */
+	  .oclrintradr = R_DMA_CH8_CLR_INTR,
+	  .ofirstadr   = R_DMA_CH8_FIRST,
+	  .ocmdadr     = R_DMA_CH8_CMD,
+	  .ostatusadr  = R_DMA_CH8_STATUS,
+	  .iclrintradr = R_DMA_CH9_CLR_INTR,
+	  .ifirstadr   = R_DMA_CH9_FIRST,
+	  .icmdadr     = R_DMA_CH9_CMD,
+	  .idescradr   = R_DMA_CH9_DESCR,
+	  .flags       = STD_FLAGS,
+	  .rx_ctrl     = DEF_RX,
+	  .tx_ctrl     = DEF_TX,
+	  .iseteop     = 3,
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+          .enabled  = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
+	  .dma_out_enabled = 1,
+#else
+	  .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
+	  .dma_in_enabled = 1,
+#else
+	  .dma_in_enabled = 0
+#endif
+#else
+          .enabled  = 0,
+	  .dma_out_enabled = 0,
+	  .dma_in_enabled = 0
+#endif
+},  /* ttyS1 */
+
+	{ .baud        = DEF_BAUD,
+	  .port        = (unsigned char *)R_SERIAL2_CTRL,
+	  .irq         = 1U << 4,  /* uses DMA 2 and 3 */
+	  .oclrintradr = R_DMA_CH2_CLR_INTR,
+	  .ofirstadr   = R_DMA_CH2_FIRST,
+	  .ocmdadr     = R_DMA_CH2_CMD,
+	  .ostatusadr  = R_DMA_CH2_STATUS,
+	  .iclrintradr = R_DMA_CH3_CLR_INTR,
+	  .ifirstadr   = R_DMA_CH3_FIRST,
+	  .icmdadr     = R_DMA_CH3_CMD,
+	  .idescradr   = R_DMA_CH3_DESCR,
+	  .flags       = STD_FLAGS,
+	  .rx_ctrl     = DEF_RX,
+	  .tx_ctrl     = DEF_TX,
+	  .iseteop     = 0,
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+          .enabled  = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+	  .dma_out_enabled = 1,
+#else
+	  .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+	  .dma_in_enabled = 1,
+#else
+	  .dma_in_enabled = 0
+#endif
+#else
+          .enabled  = 0,
+	  .dma_out_enabled = 0,
+	  .dma_in_enabled = 0
+#endif
+ },  /* ttyS2 */
+
+	{ .baud        = DEF_BAUD,
+	  .port        = (unsigned char *)R_SERIAL3_CTRL,
+	  .irq         = 1U << 8,  /* uses DMA 4 and 5 */
+	  .oclrintradr = R_DMA_CH4_CLR_INTR,
+	  .ofirstadr   = R_DMA_CH4_FIRST,
+	  .ocmdadr     = R_DMA_CH4_CMD,
+	  .ostatusadr  = R_DMA_CH4_STATUS,
+	  .iclrintradr = R_DMA_CH5_CLR_INTR,
+	  .ifirstadr   = R_DMA_CH5_FIRST,
+	  .icmdadr     = R_DMA_CH5_CMD,
+	  .idescradr   = R_DMA_CH5_DESCR,
+	  .flags       = STD_FLAGS,
+	  .rx_ctrl     = DEF_RX,
+	  .tx_ctrl     = DEF_TX,
+	  .iseteop     = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+          .enabled  = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
+	  .dma_out_enabled = 1,
+#else
+	  .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
+	  .dma_in_enabled = 1,
+#else
+	  .dma_in_enabled = 0
+#endif
+#else
+          .enabled  = 0,
+	  .dma_out_enabled = 0,
+	  .dma_in_enabled = 0
+#endif
+ }   /* ttyS3 */
+#endif
+};
+
+
+#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
+
+static struct termios *serial_termios[NR_PORTS];
+static struct termios *serial_termios_locked[NR_PORTS];
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+static struct fast_timer fast_timers[NR_PORTS];
+#endif
+
+#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY
+#define PROCSTAT(x) x
+struct ser_statistics_type {
+	int overrun_cnt;
+	int early_errors_cnt;
+	int ser_ints_ok_cnt;
+	int errors_cnt;
+	unsigned long int processing_flip;
+	unsigned long processing_flip_still_room;
+	unsigned long int timeout_flush_cnt;
+	int rx_dma_ints;
+	int tx_dma_ints;
+	int rx_tot;
+	int tx_tot;
+};
+
+static struct ser_statistics_type ser_stat[NR_PORTS];
+
+#else
+
+#define PROCSTAT(x)
+
+#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */
+
+/* RS-485 */
+#if defined(CONFIG_ETRAX_RS485)
+#ifdef CONFIG_ETRAX_FAST_TIMER
+static struct fast_timer fast_timers_rs485[NR_PORTS];
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT;
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT;
+#endif
+#endif
+
+/* Info and macros needed for each ports extra control/status signals. */
+#define E100_STRUCT_PORT(line, pinname) \
+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
+		(R_PORT_PA_DATA): ( \
+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
+		(R_PORT_PB_DATA):&dummy_ser[line]))
+
+#define E100_STRUCT_SHADOW(line, pinname) \
+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
+		(&port_pa_data_shadow): ( \
+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
+		(&port_pb_data_shadow):&dummy_ser[line]))
+#define E100_STRUCT_MASK(line, pinname) \
+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
+		(1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT): ( \
+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
+		(1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT):DUMMY_##pinname##_MASK))
+
+#define DUMMY_DTR_MASK 1
+#define DUMMY_RI_MASK  2
+#define DUMMY_DSR_MASK 4
+#define DUMMY_CD_MASK  8
+static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF};
+
+/* If not all status pins are used or disabled, use mixed mode */
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+
+#define SER0_PA_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PA_BIT+CONFIG_ETRAX_SER0_RI_ON_PA_BIT+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT+CONFIG_ETRAX_SER0_CD_ON_PA_BIT)
+
+#if SER0_PA_BITSUM != -4
+#  if CONFIG_ETRAX_SER0_DTR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER0_RI_ON_PA_BIT == -1
+#   ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER0_DSR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER0_CD_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#define SER0_PB_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PB_BIT+CONFIG_ETRAX_SER0_RI_ON_PB_BIT+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT+CONFIG_ETRAX_SER0_CD_ON_PB_BIT)
+
+#if SER0_PB_BITSUM != -4
+#  if CONFIG_ETRAX_SER0_DTR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER0_RI_ON_PB_BIT == -1
+#   ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER0_DSR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER0_CD_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#endif /* PORT0 */
+
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+
+#define SER1_PA_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PA_BIT+CONFIG_ETRAX_SER1_RI_ON_PA_BIT+CONFIG_ETRAX_SER1_DSR_ON_PA_BIT+CONFIG_ETRAX_SER1_CD_ON_PA_BIT)
+
+#if SER1_PA_BITSUM != -4
+#  if CONFIG_ETRAX_SER1_DTR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER1_RI_ON_PA_BIT == -1
+#   ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER1_DSR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER1_CD_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#define SER1_PB_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PB_BIT+CONFIG_ETRAX_SER1_RI_ON_PB_BIT+CONFIG_ETRAX_SER1_DSR_ON_PB_BIT+CONFIG_ETRAX_SER1_CD_ON_PB_BIT)
+
+#if SER1_PB_BITSUM != -4
+#  if CONFIG_ETRAX_SER1_DTR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER1_RI_ON_PB_BIT == -1
+#   ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER1_DSR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER1_CD_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#endif /* PORT1 */
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+
+#define SER2_PA_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PA_BIT+CONFIG_ETRAX_SER2_RI_ON_PA_BIT+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT+CONFIG_ETRAX_SER2_CD_ON_PA_BIT)
+
+#if SER2_PA_BITSUM != -4
+#  if CONFIG_ETRAX_SER2_DTR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER2_RI_ON_PA_BIT == -1
+#   ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER2_DSR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER2_CD_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#define SER2_PB_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PB_BIT+CONFIG_ETRAX_SER2_RI_ON_PB_BIT+CONFIG_ETRAX_SER2_DSR_ON_PB_BIT+CONFIG_ETRAX_SER2_CD_ON_PB_BIT)
+
+#if SER2_PB_BITSUM != -4
+#  if CONFIG_ETRAX_SER2_DTR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER2_RI_ON_PB_BIT == -1
+#   ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER2_DSR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER2_CD_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#endif /* PORT2 */
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+
+#define SER3_PA_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PA_BIT+CONFIG_ETRAX_SER3_RI_ON_PA_BIT+CONFIG_ETRAX_SER3_DSR_ON_PA_BIT+CONFIG_ETRAX_SER3_CD_ON_PA_BIT)
+
+#if SER3_PA_BITSUM != -4
+#  if CONFIG_ETRAX_SER3_DTR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER3_RI_ON_PA_BIT == -1
+#   ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER3_DSR_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER3_CD_ON_PA_BIT == -1
+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#define SER3_PB_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PB_BIT+CONFIG_ETRAX_SER3_RI_ON_PB_BIT+CONFIG_ETRAX_SER3_DSR_ON_PB_BIT+CONFIG_ETRAX_SER3_CD_ON_PB_BIT)
+
+#if SER3_PB_BITSUM != -4
+#  if CONFIG_ETRAX_SER3_DTR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#   endif
+# if CONFIG_ETRAX_SER3_RI_ON_PB_BIT == -1
+#   ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#     define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#   endif
+#  endif
+#  if CONFIG_ETRAX_SER3_DSR_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#  if CONFIG_ETRAX_SER3_CD_ON_PB_BIT == -1
+#    ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+#      define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+#    endif
+#  endif
+#endif
+
+#endif /* PORT3 */
+
+
+#if defined(CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED) || \
+    defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \
+    defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \
+    defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED)
+#define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+#endif
+
+#ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+/* The pins can be mixed on PA and PB */
+#define CONTROL_PINS_PORT_NOT_USED(line) \
+  &dummy_ser[line], &dummy_ser[line], \
+  &dummy_ser[line], &dummy_ser[line], \
+  &dummy_ser[line], &dummy_ser[line], \
+  &dummy_ser[line], &dummy_ser[line], \
+  DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
+
+
+struct control_pins
+{
+	volatile unsigned char *dtr_port;
+	unsigned char          *dtr_shadow;
+	volatile unsigned char *ri_port;
+	unsigned char          *ri_shadow;
+	volatile unsigned char *dsr_port;
+	unsigned char          *dsr_shadow;
+	volatile unsigned char *cd_port;
+	unsigned char          *cd_shadow;
+
+	unsigned char dtr_mask;
+	unsigned char ri_mask;
+	unsigned char dsr_mask;
+	unsigned char cd_mask;
+};
+
+static const struct control_pins e100_modem_pins[NR_PORTS] =
+{
+	/* Ser 0 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+	E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
+	E100_STRUCT_PORT(0,RI),  E100_STRUCT_SHADOW(0,RI),
+	E100_STRUCT_PORT(0,DSR), E100_STRUCT_SHADOW(0,DSR),
+	E100_STRUCT_PORT(0,CD),  E100_STRUCT_SHADOW(0,CD),
+	E100_STRUCT_MASK(0,DTR),
+	E100_STRUCT_MASK(0,RI),
+	E100_STRUCT_MASK(0,DSR),
+	E100_STRUCT_MASK(0,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(0)
+#endif
+	},
+
+	/* Ser 1 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+	E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
+	E100_STRUCT_PORT(1,RI),  E100_STRUCT_SHADOW(1,RI),
+	E100_STRUCT_PORT(1,DSR), E100_STRUCT_SHADOW(1,DSR),
+	E100_STRUCT_PORT(1,CD),  E100_STRUCT_SHADOW(1,CD),
+	E100_STRUCT_MASK(1,DTR),
+	E100_STRUCT_MASK(1,RI),
+	E100_STRUCT_MASK(1,DSR),
+	E100_STRUCT_MASK(1,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(1)
+#endif
+	},
+
+	/* Ser 2 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+	E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
+	E100_STRUCT_PORT(2,RI),  E100_STRUCT_SHADOW(2,RI),
+	E100_STRUCT_PORT(2,DSR), E100_STRUCT_SHADOW(2,DSR),
+	E100_STRUCT_PORT(2,CD),  E100_STRUCT_SHADOW(2,CD),
+	E100_STRUCT_MASK(2,DTR),
+	E100_STRUCT_MASK(2,RI),
+	E100_STRUCT_MASK(2,DSR),
+	E100_STRUCT_MASK(2,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(2)
+#endif
+	},
+
+	/* Ser 3 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+	E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
+	E100_STRUCT_PORT(3,RI),  E100_STRUCT_SHADOW(3,RI),
+	E100_STRUCT_PORT(3,DSR), E100_STRUCT_SHADOW(3,DSR),
+	E100_STRUCT_PORT(3,CD),  E100_STRUCT_SHADOW(3,CD),
+	E100_STRUCT_MASK(3,DTR),
+	E100_STRUCT_MASK(3,RI),
+	E100_STRUCT_MASK(3,DSR),
+	E100_STRUCT_MASK(3,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(3)
+#endif
+	}
+};
+#else  /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+
+/* All pins are on either PA or PB for each serial port */
+#define CONTROL_PINS_PORT_NOT_USED(line) \
+  &dummy_ser[line], &dummy_ser[line], \
+  DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
+
+
+struct control_pins
+{
+	volatile unsigned char *port;
+	unsigned char          *shadow;
+
+	unsigned char dtr_mask;
+	unsigned char ri_mask;
+	unsigned char dsr_mask;
+	unsigned char cd_mask;
+};
+
+#define dtr_port port
+#define dtr_shadow shadow
+#define ri_port port
+#define ri_shadow shadow
+#define dsr_port port
+#define dsr_shadow shadow
+#define cd_port port
+#define cd_shadow shadow
+
+static const struct control_pins e100_modem_pins[NR_PORTS] =
+{
+	/* Ser 0 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+	E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
+	E100_STRUCT_MASK(0,DTR),
+	E100_STRUCT_MASK(0,RI),
+	E100_STRUCT_MASK(0,DSR),
+	E100_STRUCT_MASK(0,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(0)
+#endif
+	},
+
+	/* Ser 1 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+	E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
+	E100_STRUCT_MASK(1,DTR),
+	E100_STRUCT_MASK(1,RI),
+	E100_STRUCT_MASK(1,DSR),
+	E100_STRUCT_MASK(1,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(1)
+#endif
+	},
+
+	/* Ser 2 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+	E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
+	E100_STRUCT_MASK(2,DTR),
+	E100_STRUCT_MASK(2,RI),
+	E100_STRUCT_MASK(2,DSR),
+	E100_STRUCT_MASK(2,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(2)
+#endif
+	},
+
+	/* Ser 3 */
+	{
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+	E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
+	E100_STRUCT_MASK(3,DTR),
+	E100_STRUCT_MASK(3,RI),
+	E100_STRUCT_MASK(3,DSR),
+	E100_STRUCT_MASK(3,CD)
+#else
+	CONTROL_PINS_PORT_NOT_USED(3)
+#endif
+	}
+};
+#endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+
+#define E100_RTS_MASK 0x20
+#define E100_CTS_MASK 0x40
+
+/* All serial port signals are active low:
+ * active   = 0 -> 3.3V to RS-232 driver -> -12V on RS-232 level
+ * inactive = 1 -> 0V   to RS-232 driver -> +12V on RS-232 level
+ *
+ * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip
+ */
+
+/* Output */
+#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK)
+/* Input */
+#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK)
+
+/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */
+/* Is an output */
+#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask)
+
+/* Normally inputs */
+#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask)
+#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask)
+
+/* Input */
+#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask)
+
+
+/*
+ * tmp_buf is used as a temporary buffer by serial_write.  We need to
+ * lock it in case the memcpy_fromfs blocks while swapping in a page,
+ * and some other program tries to do a serial write at the same time.
+ * Since the lock will only come under contention when the system is
+ * swapping and available memory is low, it makes sense to share one
+ * buffer across all the serial ports, since it significantly saves
+ * memory if large numbers of serial ports are open.
+ */
+static unsigned char *tmp_buf;
+#ifdef DECLARE_MUTEX
+static DECLARE_MUTEX(tmp_buf_sem);
+#else
+static struct semaphore tmp_buf_sem = MUTEX;
+#endif
+
+/* Calculate the chartime depending on baudrate, numbor of bits etc. */
+static void update_char_time(struct e100_serial * info)
+{
+	tcflag_t cflags = info->tty->termios->c_cflag;
+	int bits;
+
+	/* calc. number of bits / data byte */
+	/* databits + startbit and 1 stopbit */
+	if ((cflags & CSIZE) == CS7)
+		bits = 9;
+	else
+		bits = 10;
+
+	if (cflags & CSTOPB)     /* 2 stopbits ? */
+		bits++;
+
+	if (cflags & PARENB)     /* parity bit ? */
+		bits++;
+
+	/* calc timeout */
+	info->char_time_usec = ((bits * 1000000) / info->baud) + 1;
+	info->flush_time_usec = 4*info->char_time_usec;
+	if (info->flush_time_usec < MIN_FLUSH_TIME_USEC)
+		info->flush_time_usec = MIN_FLUSH_TIME_USEC;
+
+}
+
+/*
+ * This function maps from the Bxxxx defines in asm/termbits.h into real
+ * baud rates.
+ */
+
+static int
+cflag_to_baud(unsigned int cflag)
+{
+	static int baud_table[] = {
+		0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
+		4800, 9600, 19200, 38400 };
+
+	static int ext_baud_table[] = {
+		0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000,
+                0, 0, 0, 0, 0, 0, 0, 0 };
+
+	if (cflag & CBAUDEX)
+		return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
+	else
+		return baud_table[cflag & CBAUD];
+}
+
+/* and this maps to an etrax100 hardware baud constant */
+
+static unsigned char
+cflag_to_etrax_baud(unsigned int cflag)
+{
+	char retval;
+
+	static char baud_table[] = {
+		-1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 };
+
+	static char ext_baud_table[] = {
+		-1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 };
+
+	if (cflag & CBAUDEX)
+		retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
+	else
+		retval = baud_table[cflag & CBAUD];
+
+	if (retval < 0) {
+		printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag);
+		retval = 5; /* choose default 9600 instead */
+	}
+
+	return retval | (retval << 4); /* choose same for both TX and RX */
+}
+
+
+/* Various static support functions */
+
+/* Functions to set or clear DTR/RTS on the requested line */
+/* It is complicated by the fact that RTS is a serial port register, while
+ * DTR might not be implemented in the HW at all, and if it is, it can be on
+ * any general port.
+ */
+
+
+static inline void
+e100_dtr(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+	unsigned char mask = e100_modem_pins[info->line].dtr_mask;
+
+#ifdef SERIAL_DEBUG_IO
+	printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask);
+	printk("ser%i shadow before 0x%02X get: %i\n",
+	       info->line, *e100_modem_pins[info->line].dtr_shadow,
+	       E100_DTR_GET(info));
+#endif
+	/* DTR is active low */
+	{
+		unsigned long flags;
+
+		save_flags(flags);
+		cli();
+		*e100_modem_pins[info->line].dtr_shadow &= ~mask;
+		*e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask);
+		*e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow;
+		restore_flags(flags);
+	}
+
+#ifdef SERIAL_DEBUG_IO
+	printk("ser%i shadow after 0x%02X get: %i\n",
+	       info->line, *e100_modem_pins[info->line].dtr_shadow,
+	       E100_DTR_GET(info));
+#endif
+#endif
+}
+
+/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
+ *                                          0=0V    , 1=3.3V
+ */
+static inline void
+e100_rts(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+	unsigned long flags;
+	save_flags(flags);
+	cli();
+	info->rx_ctrl &= ~E100_RTS_MASK;
+	info->rx_ctrl |= (set ? 0 : E100_RTS_MASK);  /* RTS is active low */
+	info->port[REG_REC_CTRL] = info->rx_ctrl;
+	restore_flags(flags);
+#ifdef SERIAL_DEBUG_IO
+	printk("ser%i rts %i\n", info->line, set);
+#endif
+#endif
+}
+
+
+/* If this behaves as a modem, RI and CD is an output */
+static inline void
+e100_ri_out(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+	/* RI is active low */
+	{
+		unsigned char mask = e100_modem_pins[info->line].ri_mask;
+		unsigned long flags;
+
+		save_flags(flags);
+		cli();
+		*e100_modem_pins[info->line].ri_shadow &= ~mask;
+		*e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask);
+		*e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
+		restore_flags(flags);
+	}
+#endif
+}
+static inline void
+e100_cd_out(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+	/* CD is active low */
+	{
+		unsigned char mask = e100_modem_pins[info->line].cd_mask;
+		unsigned long flags;
+
+		save_flags(flags);
+		cli();
+		*e100_modem_pins[info->line].cd_shadow &= ~mask;
+		*e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask);
+		*e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
+		restore_flags(flags);
+	}
+#endif
+}
+
+static inline void
+e100_disable_rx(struct e100_serial *info)
+{
+#ifndef CONFIG_SVINTO_SIM
+	/* disable the receiver */
+	info->port[REG_REC_CTRL] =
+		(info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
+#endif
+}
+
+static inline void
+e100_enable_rx(struct e100_serial *info)
+{
+#ifndef CONFIG_SVINTO_SIM
+	/* enable the receiver */
+	info->port[REG_REC_CTRL] =
+		(info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
+#endif
+}
+
+/* the rx DMA uses both the dma_descr and the dma_eop interrupts */
+
+static inline void
+e100_disable_rxdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("rxdma_irq(%d): 0\n",info->line);
+#endif
+	DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line));
+	*R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3);
+}
+
+static inline void
+e100_enable_rxdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("rxdma_irq(%d): 1\n",info->line);
+#endif
+	DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line));
+	*R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3);
+}
+
+/* the tx DMA uses only dma_descr interrupt */
+
+static _INLINE_ void
+e100_disable_txdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("txdma_irq(%d): 0\n",info->line);
+#endif
+	DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line));
+	*R_IRQ_MASK2_CLR = info->irq;
+}
+
+static _INLINE_ void
+e100_enable_txdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("txdma_irq(%d): 1\n",info->line);
+#endif
+	DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line));
+	*R_IRQ_MASK2_SET = info->irq;
+}
+
+static _INLINE_ void
+e100_disable_txdma_channel(struct e100_serial *info)
+{
+	unsigned long flags;
+
+	/* Disable output DMA channel for the serial port in question
+	 * ( set to something other then serialX)
+	 */
+	save_flags(flags);
+	cli();
+	DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
+	if (info->line == 0) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) ==
+		    IO_STATE(R_GEN_CONFIG, dma6, serial0)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma6);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
+		}
+	} else if (info->line == 1) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) ==
+		    IO_STATE(R_GEN_CONFIG, dma8, serial1)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma8);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
+		}
+	} else if (info->line == 2) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) ==
+		    IO_STATE(R_GEN_CONFIG, dma2, serial2)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma2);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
+		}
+	} else if (info->line == 3) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) ==
+		    IO_STATE(R_GEN_CONFIG, dma4, serial3)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma4);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1);
+		}
+	}
+	*R_GEN_CONFIG = genconfig_shadow;
+	restore_flags(flags);
+}
+
+
+static _INLINE_ void
+e100_enable_txdma_channel(struct e100_serial *info)
+{
+	unsigned long flags;
+
+	save_flags(flags);
+	cli();
+	DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line));
+	/* Enable output DMA channel for the serial port in question */
+	if (info->line == 0) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma6);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0);
+	} else if (info->line == 1) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma8);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1);
+	} else if (info->line == 2) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma2);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2);
+	} else if (info->line == 3) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma4);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3);
+	}
+	*R_GEN_CONFIG = genconfig_shadow;
+	restore_flags(flags);
+}
+
+static _INLINE_ void
+e100_disable_rxdma_channel(struct e100_serial *info)
+{
+	unsigned long flags;
+
+	/* Disable input DMA channel for the serial port in question
+	 * ( set to something other then serialX)
+	 */
+	save_flags(flags);
+	cli();
+	if (info->line == 0) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) ==
+		    IO_STATE(R_GEN_CONFIG, dma7, serial0)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma7);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused);
+		}
+	} else if (info->line == 1) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) ==
+		    IO_STATE(R_GEN_CONFIG, dma9, serial1)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma9);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb);
+		}
+	} else if (info->line == 2) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) ==
+		    IO_STATE(R_GEN_CONFIG, dma3, serial2)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma3);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0);
+		}
+	} else if (info->line == 3) {
+		if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) ==
+		    IO_STATE(R_GEN_CONFIG, dma5, serial3)) {
+			genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma5);
+			genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1);
+		}
+	}
+	*R_GEN_CONFIG = genconfig_shadow;
+	restore_flags(flags);
+}
+
+
+static _INLINE_ void
+e100_enable_rxdma_channel(struct e100_serial *info)
+{
+	unsigned long flags;
+
+	save_flags(flags);
+	cli();
+	/* Enable input DMA channel for the serial port in question */
+	if (info->line == 0) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma7);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0);
+	} else if (info->line == 1) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma9);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1);
+	} else if (info->line == 2) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma3);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2);
+	} else if (info->line == 3) {
+		genconfig_shadow &=  ~IO_MASK(R_GEN_CONFIG, dma5);
+		genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3);
+	}
+	*R_GEN_CONFIG = genconfig_shadow;
+	restore_flags(flags);
+}
+
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+/* in order to detect and fix errors on the first byte
+   we have to use the serial interrupts as well. */
+
+static inline void
+e100_disable_serial_data_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("ser_irq(%d): 0\n",info->line);
+#endif
+	DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line));
+	*R_IRQ_MASK1_CLR = (1U << (8+2*info->line));
+}
+
+static inline void
+e100_enable_serial_data_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("ser_irq(%d): 1\n",info->line);
+	printk("**** %d = %d\n",
+	       (8+2*info->line),
+	       (1U << (8+2*info->line)));
+#endif
+	DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line));
+	*R_IRQ_MASK1_SET = (1U << (8+2*info->line));
+}
+#endif
+
+static inline void
+e100_disable_serial_tx_ready_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("ser_tx_irq(%d): 0\n",info->line);
+#endif
+	DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line));
+	*R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line));
+}
+
+static inline void
+e100_enable_serial_tx_ready_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+	printk("ser_tx_irq(%d): 1\n",info->line);
+	printk("**** %d = %d\n",
+	       (8+1+2*info->line),
+	       (1U << (8+1+2*info->line)));
+#endif
+	DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line));
+	*R_IRQ_MASK1_SET = (1U << (8+1+2*info->line));
+}
+
+static inline void e100_enable_rx_irq(struct e100_serial *info)
+{
+	if (info->uses_dma_in)
+		e100_enable_rxdma_irq(info);
+	else
+		e100_enable_serial_data_irq(info);
+}
+static inline void e100_disable_rx_irq(struct e100_serial *info)
+{
+	if (info->uses_dma_in)
+		e100_disable_rxdma_irq(info);
+	else
+		e100_disable_serial_data_irq(info);
+}
+
+#if defined(CONFIG_ETRAX_RS485)
+/* Enable RS-485 mode on selected port. This is UGLY. */
+static int
+e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
+{
+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+	*R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit);
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+	REG_SHADOW_SET(R_PORT_G_DATA,  port_g_data_shadow,
+		       rs485_port_g_bit, 1);
+#endif
+#if defined(CONFIG_ETRAX_RS485_LTC1387)
+	REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+		       CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1);
+	REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+		       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
+#endif
+
+	info->rs485.rts_on_send = 0x01 & r->rts_on_send;
+	info->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
+	if (r->delay_rts_before_send >= 1000)
+		info->rs485.delay_rts_before_send = 1000;
+	else
+		info->rs485.delay_rts_before_send = r->delay_rts_before_send;
+	info->rs485.enabled = r->enabled;
+/*	printk("rts: on send = %i, after = %i, enabled = %i",
+		    info->rs485.rts_on_send,
+		    info->rs485.rts_after_sent,
+		    info->rs485.enabled
+	);
+*/
+	return 0;
+}
+
+static int
+e100_write_rs485(struct tty_struct *tty, int from_user,
+                 const unsigned char *buf, int count)
+{
+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+	int old_enabled = info->rs485.enabled;
+
+	/* rs485 is always implicitly enabled if we're using the ioctl()
+	 * but it doesn't have to be set in the rs485_control
+	 * (to be backward compatible with old apps)
+	 * So we store, set and restore it.
+	 */
+	info->rs485.enabled = 1;
+	/* rs_write now deals with RS485 if enabled */
+	count = rs_write(tty, from_user, buf, count);
+	info->rs485.enabled = old_enabled;
+	return count;
+}
+
+#ifdef CONFIG_ETRAX_FAST_TIMER
+/* Timer function to toggle RTS when using FAST_TIMER */
+static void rs485_toggle_rts_timer_function(unsigned long data)
+{
+	struct e100_serial *info = (struct e100_serial *)data;
+
+	fast_timers_rs485[info->line].function = NULL;
+	e100_rts(info, info->rs485.rts_after_sent);
+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
+	e100_enable_rx(info);
+	e100_enable_rx_irq(info);
+#endif
+}
+#endif
+#endif /* CONFIG_ETRAX_RS485 */
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter using the XOFF registers, as necessary.
+ * ------------------------------------------------------------
+ */
+
+static void
+rs_stop(struct tty_struct *tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	if (info) {
+		unsigned long flags;
+		unsigned long xoff;
+
+		save_flags(flags); cli();
+		DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n",
+				CIRC_CNT(info->xmit.head,
+					 info->xmit.tail,SERIAL_XMIT_SIZE)));
+
+		xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty));
+		xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
+		if (tty->termios->c_iflag & IXON ) {
+			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
+		}
+
+		*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+		restore_flags(flags);
+	}
+}
+
+static void
+rs_start(struct tty_struct *tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	if (info) {
+		unsigned long flags;
+		unsigned long xoff;
+
+		save_flags(flags); cli();
+		DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n",
+				CIRC_CNT(info->xmit.head,
+					 info->xmit.tail,SERIAL_XMIT_SIZE)));
+		xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
+		xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
+		if (tty->termios->c_iflag & IXON ) {
+			xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
+		}
+
+		*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+		if (!info->uses_dma_out &&
+		    info->xmit.head != info->xmit.tail && info->xmit.buf)
+			e100_enable_serial_tx_ready_irq(info);
+
+		restore_flags(flags);
+	}
+}
+
+/*
+ * ----------------------------------------------------------------------
+ *
+ * Here starts the interrupt handling routines.  All of the following
+ * subroutines are declared as inline and are folded into
+ * rs_interrupt().  They were separated out for readability's sake.
+ *
+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off.  People who may want to modify
+ * rs_interrupt() should try to keep the interrupt handler as fast as
+ * possible.  After you are done making modifications, it is not a bad
+ * idea to do:
+ *
+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
+ *
+ * and look at the resulting assemble code in serial.s.
+ *
+ * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
+ * -----------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver.
+ */
+static _INLINE_ void
+rs_sched_event(struct e100_serial *info,
+				    int event)
+{
+	if (info->event & (1 << event))
+		return;
+	info->event |= 1 << event;
+	schedule_work(&info->work);
+}
+
+/* The output DMA channel is free - use it to send as many chars as possible
+ * NOTES:
+ *   We don't pay attention to info->x_char, which means if the TTY wants to
+ *   use XON/XOFF it will set info->x_char but we won't send any X char!
+ *
+ *   To implement this, we'd just start a DMA send of 1 byte pointing at a
+ *   buffer containing the X char, and skip updating xmit. We'd also have to
+ *   check if the last sent char was the X char when we enter this function
+ *   the next time, to avoid updating xmit with the sent X value.
+ */
+
+static void
+transmit_chars_dma(struct e100_serial *info)
+{
+	unsigned int c, sentl;
+	struct etrax_dma_descr *descr;
+
+#ifdef CONFIG_SVINTO_SIM
+	/* This will output too little if tail is not 0 always since
+	 * we don't reloop to send the other part. Anyway this SHOULD be a
+	 * no-op - transmit_chars_dma would never really be called during sim
+	 * since rs_write does not write into the xmit buffer then.
+	 */
+	if (info->xmit.tail)
+		printk("Error in serial.c:transmit_chars-dma(), tail!=0\n");
+	if (info->xmit.head != info->xmit.tail) {
+		SIMCOUT(info->xmit.buf + info->xmit.tail,
+			CIRC_CNT(info->xmit.head,
+				 info->xmit.tail,
+				 SERIAL_XMIT_SIZE));
+		info->xmit.head = info->xmit.tail;  /* move back head */
+		info->tr_running = 0;
+	}
+	return;
+#endif
+	/* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
+	*info->oclrintradr =
+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+
+#ifdef SERIAL_DEBUG_INTR
+	if (info->line == SERIAL_DEBUG_LINE)
+		printk("tc\n");
+#endif
+	if (!info->tr_running) {
+		/* weirdo... we shouldn't get here! */
+		printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n");
+		return;
+	}
+
+	descr = &info->tr_descr;
+
+	/* first get the amount of bytes sent during the last DMA transfer,
+	   and update xmit accordingly */
+
+	/* if the stop bit was not set, all data has been sent */
+	if (!(descr->status & d_stop)) {
+		sentl = descr->sw_len;
+	} else
+		/* otherwise we find the amount of data sent here */
+		sentl = descr->hw_len;
+
+	DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl));
+
+	/* update stats */
+	info->icount.tx += sentl;
+
+	/* update xmit buffer */
+	info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1);
+
+	/* if there is only a few chars left in the buf, wake up the blocked
+	   write if any */
+	if (CIRC_CNT(info->xmit.head,
+		     info->xmit.tail,
+		     SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
+		rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+
+	/* find out the largest amount of consecutive bytes we want to send now */
+
+	c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+
+	/* Don't send all in one DMA transfer - divide it so we wake up
+	 * application before all is sent
+	 */
+
+	if (c >= 4*WAKEUP_CHARS)
+		c = c/2;
+
+	if (c <= 0) {
+		/* our job here is done, don't schedule any new DMA transfer */
+		info->tr_running = 0;
+
+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
+		if (info->rs485.enabled) {
+			/* Set a short timer to toggle RTS */
+			start_one_shot_timer(&fast_timers_rs485[info->line],
+			                     rs485_toggle_rts_timer_function,
+			                     (unsigned long)info,
+			                     info->char_time_usec*2,
+			                     "RS-485");
+		}
+#endif /* RS485 */
+		return;
+	}
+
+	/* ok we can schedule a dma send of c chars starting at info->xmit.tail */
+	/* set up the descriptor correctly for output */
+	DFLOW(DEBUG_LOG(info->line, "TX %i\n", c));
+	descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */
+	descr->sw_len = c;
+	descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail);
+	descr->status = 0;
+
+	*info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */
+	*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
+
+	/* DMA is now running (hopefully) */
+} /* transmit_chars_dma */
+
+static void
+start_transmit(struct e100_serial *info)
+{
+#if 0
+	if (info->line == SERIAL_DEBUG_LINE)
+		printk("x\n");
+#endif
+
+	info->tr_descr.sw_len = 0;
+	info->tr_descr.hw_len = 0;
+	info->tr_descr.status = 0;
+	info->tr_running = 1;
+	if (info->uses_dma_out)
+		transmit_chars_dma(info);
+	else
+		e100_enable_serial_tx_ready_irq(info);
+} /* start_transmit */
+
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+static int serial_fast_timer_started = 0;
+static int serial_fast_timer_expired = 0;
+static void flush_timeout_function(unsigned long data);
+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\
+  unsigned long timer_flags; \
+  save_flags(timer_flags); \
+  cli(); \
+  if (fast_timers[info->line].function == NULL) { \
+    serial_fast_timer_started++; \
+    TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \
+    TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \
+    start_one_shot_timer(&fast_timers[info->line], \
+                         flush_timeout_function, \
+                         (unsigned long)info, \
+                         (usec), \
+                         string); \
+  } \
+  else { \
+    TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \
+  } \
+  restore_flags(timer_flags); \
+}
+#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec)
+
+#else
+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec)
+#define START_FLUSH_FAST_TIMER(info, string)
+#endif
+
+static struct etrax_recv_buffer *
+alloc_recv_buffer(unsigned int size)
+{
+	struct etrax_recv_buffer *buffer;
+
+	if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
+		return NULL;
+
+	buffer->next = NULL;
+	buffer->length = 0;
+	buffer->error = TTY_NORMAL;
+
+	return buffer;
+}
+
+static void
+append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer)
+{
+	unsigned long flags;
+
+	save_flags(flags);
+	cli();
+
+	if (!info->first_recv_buffer)
+		info->first_recv_buffer = buffer;
+	else
+		info->last_recv_buffer->next = buffer;
+
+	info->last_recv_buffer = buffer;
+
+	info->recv_cnt += buffer->length;
+	if (info->recv_cnt > info->max_recv_cnt)
+		info->max_recv_cnt = info->recv_cnt;
+
+	restore_flags(flags);
+}
+
+static int
+add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag)
+{
+	struct etrax_recv_buffer *buffer;
+	if (info->uses_dma_in) {
+		if (!(buffer = alloc_recv_buffer(4)))
+			return 0;
+
+		buffer->length = 1;
+		buffer->error = flag;
+		buffer->buffer[0] = data;
+
+		append_recv_buffer(info, buffer);
+
+		info->icount.rx++;
+	} else {
+		struct tty_struct *tty = info->tty;
+		*tty->flip.char_buf_ptr = data;
+		*tty->flip.flag_buf_ptr = flag;
+		tty->flip.flag_buf_ptr++;
+		tty->flip.char_buf_ptr++;
+		tty->flip.count++;
+		info->icount.rx++;
+	}
+
+	return 1;
+}
+
+extern _INLINE_ unsigned int
+handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl)
+{
+	struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
+
+	if (info->recv_cnt + recvl > 65536) {
+		printk(KERN_CRIT
+		       "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __FUNCTION__, recvl);
+		return 0;
+	}
+
+	buffer->length = recvl;
+
+	if (info->errorcode == ERRCODE_SET_BREAK)
+		buffer->error = TTY_BREAK;
+	info->errorcode = 0;
+
+	append_recv_buffer(info, buffer);
+
+	if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+		panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__);
+
+	descr->buf = virt_to_phys(buffer->buffer);
+
+	return recvl;
+}
+
+static _INLINE_ unsigned int
+handle_all_descr_data(struct e100_serial *info)
+{
+	struct etrax_dma_descr *descr;
+	unsigned int recvl;
+	unsigned int ret = 0;
+
+	while (1)
+	{
+		descr = &info->rec_descr[info->cur_rec_descr];
+
+		if (descr == phys_to_virt(*info->idescradr))
+			break;
+
+		if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS)
+			info->cur_rec_descr = 0;
+
+		/* find out how many bytes were read */
+
+		/* if the eop bit was not set, all data has been received */
+		if (!(descr->status & d_eop)) {
+			recvl = descr->sw_len;
+		} else {
+			/* otherwise we find the amount of data received here */
+			recvl = descr->hw_len;
+		}
+
+		/* Reset the status information */
+		descr->status = 0;
+
+		DFLOW(  DEBUG_LOG(info->line, "RX %lu\n", recvl);
+			if (info->tty->stopped) {
+				unsigned char *buf = phys_to_virt(descr->buf);
+				DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]);
+				DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]);
+				DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]);
+			}
+			);
+
+		/* update stats */
+		info->icount.rx += recvl;
+
+		ret += handle_descr_data(info, descr, recvl);
+	}
+
+	return ret;
+}
+
+static _INLINE_ void
+receive_chars_dma(struct e100_serial *info)
+{
+	struct tty_struct *tty;
+	unsigned char rstat;
+
+#ifdef CONFIG_SVINTO_SIM
+	/* No receive in the simulator.  Will probably be when the rest of
+	 * the serial interface works, and this piece will just be removed.
+	 */
+	return;
+#endif
+
+	/* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
+	*info->iclrintradr =
+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+		IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+
+	tty = info->tty;
+	if (!tty) /* Something wrong... */
+		return;
+
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+	if (info->uses_dma_in)
+		e100_enable_serial_data_irq(info);
+#endif
+
+	if (info->errorcode == ERRCODE_INSERT_BREAK)
+		add_char_and_flag(info, '\0', TTY_BREAK);
+
+	handle_all_descr_data(info);
+
+	/* Read the status register to detect errors */
+	rstat = info->port[REG_STATUS];
+	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
+		DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat));
+	}
+
+	if (rstat & SER_ERROR_MASK) {
+		/* If we got an error, we must reset it by reading the
+		 * data_in field
+		 */
+		unsigned char data = info->port[REG_DATA];
+
+		PROCSTAT(ser_stat[info->line].errors_cnt++);
+		DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
+			  ((rstat & SER_ERROR_MASK) << 8) | data);
+
+		if (rstat & SER_PAR_ERR_MASK)
+			add_char_and_flag(info, data, TTY_PARITY);
+		else if (rstat & SER_OVERRUN_MASK)
+			add_char_and_flag(info, data, TTY_OVERRUN);
+		else if (rstat & SER_FRAMING_ERR_MASK)
+			add_char_and_flag(info, data, TTY_FRAME);
+	}
+
+	START_FLUSH_FAST_TIMER(info, "receive_chars");
+
+	/* Restart the receiving DMA */
+	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
+}
+
+static _INLINE_ int
+start_recv_dma(struct e100_serial *info)
+{
+	struct etrax_dma_descr *descr = info->rec_descr;
+	struct etrax_recv_buffer *buffer;
+        int i;
+
+	/* Set up the receiving descriptors */
+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
+		if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+			panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__);
+
+		descr[i].ctrl = d_int;
+		descr[i].buf = virt_to_phys(buffer->buffer);
+		descr[i].sw_len = SERIAL_DESCR_BUF_SIZE;
+		descr[i].hw_len = 0;
+		descr[i].status = 0;
+		descr[i].next = virt_to_phys(&descr[i+1]);
+	}
+
+	/* Link the last descriptor to the first */
+	descr[i-1].next = virt_to_phys(&descr[0]);
+
+	/* Start with the first descriptor in the list */
+	info->cur_rec_descr = 0;
+
+	/* Start the DMA */
+	*info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]);
+	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
+
+	/* Input DMA should be running now */
+	return 1;
+}
+
+static void
+start_receive(struct e100_serial *info)
+{
+#ifdef CONFIG_SVINTO_SIM
+	/* No receive in the simulator.  Will probably be when the rest of
+	 * the serial interface works, and this piece will just be removed.
+	 */
+	return;
+#endif
+	info->tty->flip.count = 0;
+	if (info->uses_dma_in) {
+		/* reset the input dma channel to be sure it works */
+
+		*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
+
+		start_recv_dma(info);
+	}
+}
+
+
+static _INLINE_ void
+status_handle(struct e100_serial *info, unsigned short status)
+{
+}
+
+/* the bits in the MASK2 register are laid out like this:
+   DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR
+   where I is the input channel and O is the output channel for the port.
+   info->irq is the bit number for the DMAO_DESCR so to check the others we
+   shift info->irq to the left.
+*/
+
+/* dma output channel interrupt handler
+   this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or
+   DMA8(ser1) when they have finished a descriptor with the intr flag set.
+*/
+
+static irqreturn_t
+tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	struct e100_serial *info;
+	unsigned long ireg;
+	int i;
+	int handled = 0;
+
+#ifdef CONFIG_SVINTO_SIM
+	/* No receive in the simulator.  Will probably be when the rest of
+	 * the serial interface works, and this piece will just be removed.
+	 */
+	{
+		const char *s = "What? tr_interrupt in simulator??\n";
+		SIMCOUT(s,strlen(s));
+	}
+	return IRQ_HANDLED;
+#endif
+
+	/* find out the line that caused this irq and get it from rs_table */
+
+	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
+
+	for (i = 0; i < NR_PORTS; i++) {
+		info = rs_table + i;
+		if (!info->enabled || !info->uses_dma_out)
+			continue;
+		/* check for dma_descr (don't need to check for dma_eop in output dma for serial */
+		if (ireg & info->irq) {
+			handled = 1;
+			/* we can send a new dma bunch. make it so. */
+			DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i));
+			/* Read jiffies_usec first,
+			 * we want this time to be as late as possible
+			 */
+ 			PROCSTAT(ser_stat[info->line].tx_dma_ints++);
+			info->last_tx_active_usec = GET_JIFFIES_USEC();
+			info->last_tx_active = jiffies;
+			transmit_chars_dma(info);
+		}
+
+		/* FIXME: here we should really check for a change in the
+		   status lines and if so call status_handle(info) */
+	}
+	return IRQ_RETVAL(handled);
+} /* tr_interrupt */
+
+/* dma input channel interrupt handler */
+
+static irqreturn_t
+rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+	struct e100_serial *info;
+	unsigned long ireg;
+	int i;
+	int handled = 0;
+
+#ifdef CONFIG_SVINTO_SIM
+	/* No receive in the simulator.  Will probably be when the rest of
+	 * the serial interface works, and this piece will just be removed.
+	 */
+	{
+		const char *s = "What? rec_interrupt in simulator??\n";
+		SIMCOUT(s,strlen(s));
+	}
+	return IRQ_HANDLED;
+#endif
+
+	/* find out the line that caused this irq and get it from rs_table */
+
+	ireg = *R_IRQ_MASK2_RD;  /* get the active irq bits for the dma channels */
+
+	for (i = 0; i < NR_PORTS; i++) {
+		info = rs_table + i;
+		if (!info->enabled || !info->uses_dma_in)
+			continue;
+		/* check for both dma_eop and dma_descr for the input dma channel */
+		if (ireg & ((info->irq << 2) | (info->irq << 3))) {
+			handled = 1;
+			/* we have received something */
+			receive_chars_dma(info);
+		}
+
+		/* FIXME: here we should really check for a change in the
+		   status lines and if so call status_handle(info) */
+	}
+	return IRQ_RETVAL(handled);
+} /* rec_interrupt */
+
+static _INLINE_ int
+force_eop_if_needed(struct e100_serial *info)
+{
+	/* We check data_avail bit to determine if data has
+	 * arrived since last time
+	 */
+	unsigned char rstat = info->port[REG_STATUS];
+
+	/* error or datavail? */
+	if (rstat & SER_ERROR_MASK) {
+		/* Some error has occurred. If there has been valid data, an
+		 * EOP interrupt will be made automatically. If no data, the
+		 * normal ser_interrupt should be enabled and handle it.
+		 * So do nothing!
+		 */
+		DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n",
+		          rstat | (info->line << 8));
+		return 0;
+	}
+
+	if (rstat & SER_DATA_AVAIL_MASK) {
+		/* Ok data, no error, count it */
+		TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n",
+		          rstat | (info->line << 8)));
+		/* Read data to clear status flags */
+		(void)info->port[REG_DATA];
+
+		info->forced_eop = 0;
+		START_FLUSH_FAST_TIMER(info, "magic");
+		return 0;
+	}
+
+	/* hit the timeout, force an EOP for the input
+	 * dma channel if we haven't already
+	 */
+	if (!info->forced_eop) {
+		info->forced_eop = 1;
+		PROCSTAT(ser_stat[info->line].timeout_flush_cnt++);
+		TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line));
+		FORCE_EOP(info);
+	}
+
+	return 1;
+}
+
+extern _INLINE_ void
+flush_to_flip_buffer(struct e100_serial *info)
+{
+	struct tty_struct *tty;
+	struct etrax_recv_buffer *buffer;
+	unsigned int length;
+	unsigned long flags;
+	int max_flip_size;
+
+	if (!info->first_recv_buffer)
+		return;
+
+	save_flags(flags);
+	cli();
+
+	if (!(tty = info->tty)) {
+		restore_flags(flags);
+		return;
+	}
+
+	length = tty->flip.count;
+	/* Don't flip more than the ldisc has room for.
+	 * The return value from ldisc.receive_room(tty) - might not be up to
+	 * date, the previous flip of up to TTY_FLIPBUF_SIZE might be on the
+	 * processed and not accounted for yet.
+	 * Since we use DMA, 1 SERIAL_DESCR_BUF_SIZE could be on the way.
+	 * Lets buffer data here and let flow control take care of it.
+	 * Since we normally flip large chunks, the ldisc don't react
+	 * with throttle until too late if we flip to much.
+	 */
+	max_flip_size = tty->ldisc.receive_room(tty);
+	if (max_flip_size < 0)
+		max_flip_size = 0;
+	if (max_flip_size <= (TTY_FLIPBUF_SIZE +         /* Maybe not accounted for */
+			      length + info->recv_cnt +  /* We have this queued */
+			      2*SERIAL_DESCR_BUF_SIZE +    /* This could be on the way */
+			      TTY_THRESHOLD_THROTTLE)) { /* Some slack */
+		/* check TTY_THROTTLED first so it indicates our state */
+		if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
+			DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles room %lu\n", max_flip_size));
+			rs_throttle(tty);
+		}
+#if 0
+		else if (max_flip_size <= (TTY_FLIPBUF_SIZE +         /* Maybe not accounted for */
+					   length + info->recv_cnt +  /* We have this queued */
+					   SERIAL_DESCR_BUF_SIZE +    /* This could be on the way */
+					   TTY_THRESHOLD_THROTTLE)) { /* Some slack */
+			DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles again! %lu\n", max_flip_size));
+			rs_throttle(tty);
+		}
+#endif
+	}
+
+	if (max_flip_size > TTY_FLIPBUF_SIZE)
+		max_flip_size = TTY_FLIPBUF_SIZE;
+
+	while ((buffer = info->first_recv_buffer) && length < max_flip_size) {
+		unsigned int count = buffer->length;
+
+		if (length + count > max_flip_size)
+			count = max_flip_size - length;
+
+		memcpy(tty->flip.char_buf_ptr + length, buffer->buffer, count);
+		memset(tty->flip.flag_buf_ptr + length, TTY_NORMAL, count);
+		tty->flip.flag_buf_ptr[length] = buffer->error;
+
+		length += count;
+		info->recv_cnt -= count;
+		DFLIP(DEBUG_LOG(info->line,"flip: %i\n", length));
+
+		if (count == buffer->length) {
+			info->first_recv_buffer = buffer->next;
+			kfree(buffer);
+		} else {
+			buffer->length -= count;
+			memmove(buffer->buffer, buffer->buffer + count, buffer->length);
+			buffer->error = TTY_NORMAL;
+		}
+	}
+
+	if (!info->first_recv_buffer)
+		info->last_recv_buffer = NULL;
+
+	tty->flip.count = length;
+	DFLIP(if (tty->ldisc.chars_in_buffer(tty) > 3500) {
+		DEBUG_LOG(info->line, "ldisc %lu\n",
+			  tty->ldisc.chars_in_buffer(tty));
+		DEBUG_LOG(info->line, "flip.count %lu\n",
+			  tty->flip.count);
+	      }
+	      );
+	restore_flags(flags);
+
+	DFLIP(
+	  if (1) {
+
+		  if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
+			  DEBUG_LOG(info->line, "*** TTY_DONT_FLIP set flip.count %i ***\n", tty->flip.count);
+			  DEBUG_LOG(info->line, "*** recv_cnt %i\n", info->recv_cnt);
+		  } else {
+		  }
+		  DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx);
+		  DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty));
+		  DEBUG_LOG(info->line, "room  %lu\n", tty->ldisc.receive_room(tty));
+	  }
+
+	);
+
+	/* this includes a check for low-latency */
+	tty_flip_buffer_push(tty);
+}
+
+static _INLINE_ void
+check_flush_timeout(struct e100_serial *info)
+{
+	/* Flip what we've got (if we can) */
+	flush_to_flip_buffer(info);
+
+	/* We might need to flip later, but not to fast
+	 * since the system is busy processing input... */
+	if (info->first_recv_buffer)
+		START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000);
+
+	/* Force eop last, since data might have come while we're processing
+	 * and if we started the slow timer above, we won't start a fast
+	 * below.
+	 */
+	force_eop_if_needed(info);
+}
+
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+static void flush_timeout_function(unsigned long data)
+{
+	struct e100_serial *info = (struct e100_serial *)data;
+
+	fast_timers[info->line].function = NULL;
+	serial_fast_timer_expired++;
+	TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line));
+	TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired));
+	check_flush_timeout(info);
+}
+
+#else
+
+/* dma fifo/buffer timeout handler
+   forces an end-of-packet for the dma input channel if no chars
+   have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s.
+*/
+
+static struct timer_list flush_timer;
+
+static void
+timed_flush_handler(unsigned long ptr)
+{
+	struct e100_serial *info;
+	int i;
+
+#ifdef CONFIG_SVINTO_SIM
+	return;
+#endif
+
+	for (i = 0; i < NR_PORTS; i++) {
+		info = rs_table + i;
+		if (info->uses_dma_in)
+			check_flush_timeout(info);
+	}
+
+	/* restart flush timer */
+	mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
+}
+#endif
+
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+
+/* If there is an error (ie break) when the DMA is running and
+ * there are no bytes in the fifo the DMA is stopped and we get no
+ * eop interrupt. Thus we have to monitor the first bytes on a DMA
+ * transfer, and if it is without error we can turn the serial
+ * interrupts off.
+ */
+
+/*
+BREAK handling on ETRAX 100:
+ETRAX will generate interrupt although there is no stop bit between the
+characters.
+
+Depending on how long the break sequence is, the end of the breaksequence
+will look differently:
+| indicates start/end of a character.
+
+B= Break character (0x00) with framing error.
+E= Error byte with parity error received after B characters.
+F= "Faked" valid byte received immediately after B characters.
+V= Valid byte
+
+1.
+    B          BL         ___________________________ V
+.._|__________|__________|                           |valid data |
+
+Multiple frame errors with data == 0x00 (B),
+the timing matches up "perfectly" so no extra ending char is detected.
+The RXD pin is 1 in the last interrupt, in that case
+we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really
+know if another byte will come and this really is case 2. below
+(e.g F=0xFF or 0xFE)
+If RXD pin is 0 we can expect another character (see 2. below).
+
+
+2.
+
+    B          B          E or F__________________..__ V
+.._|__________|__________|______    |                 |valid data
+                          "valid" or
+                          parity error
+
+Multiple frame errors with data == 0x00 (B),
+but the part of the break trigs is interpreted as a start bit (and possibly
+some 0 bits followed by a number of 1 bits and a stop bit).
+Depending on parity settings etc. this last character can be either
+a fake "valid" char (F) or have a parity error (E).
+
+If the character is valid it will be put in the buffer,
+we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt
+will set the flags so the tty will handle it,
+if it's an error byte it will not be put in the buffer
+and we set info->errorcode = ERRCODE_INSERT_BREAK.
+
+To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp
+of the last faulty char (B) and compares it with the current time:
+If the time elapsed time is less then 2*char_time_usec we will assume
+it's a faked F char and not a Valid char and set
+info->errorcode = ERRCODE_SET_BREAK.
+
+Flaws in the above solution:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+We use the timer to distinguish a F character from a V character,
+if a V character is to close after the break we might make the wrong decision.
+
+TODO: The break will be delayed until an F or V character is received.
+
+*/
+
+extern _INLINE_
+struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
+{
+	unsigned long data_read;
+	struct tty_struct *tty = info->tty;
+
+	if (!tty) {
+		printk("!NO TTY!\n");
+		return info;
+	}
+	if (tty->flip.count >= TTY_FLIPBUF_SIZE - TTY_THRESHOLD_THROTTLE) {
+		/* check TTY_THROTTLED first so it indicates our state */
+		if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
+			DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count));
+			rs_throttle(tty);
+		}
+	}
+	if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+		DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count);
+		tty->flip.work.func((void *) tty);
+		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+			DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count);
+			return info;		/* if TTY_DONT_FLIP is set */
+		}
+	}
+	/* Read data and status at the same time */
+	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+more_data:
+	if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) {
+		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
+	}
+	DINTR2(DEBUG_LOG(info->line, "ser_rx   %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)));
+
+	if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) |
+			  IO_MASK(R_SERIAL0_READ, par_err) |
+			  IO_MASK(R_SERIAL0_READ, overrun) )) {
+		/* An error */
+		info->last_rx_active_usec = GET_JIFFIES_USEC();
+		info->last_rx_active = jiffies;
+		DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read));
+		DLOG_INT_TRIG(
+		if (!log_int_trig1_pos) {
+			log_int_trig1_pos = log_int_pos;
+			log_int(rdpc(), 0, 0);
+		}
+		);
+
+
+		if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) &&
+		     (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) {
+			/* Most likely a break, but we get interrupts over and
+			 * over again.
+			 */
+
+			if (!info->break_detected_cnt) {
+				DEBUG_LOG(info->line, "#BRK start\n", 0);
+			}
+			if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) {
+				/* The RX pin is high now, so the break
+				 * must be over, but....
+				 * we can't really know if we will get another
+				 * last byte ending the break or not.
+				 * And we don't know if the byte (if any) will
+				 * have an error or look valid.
+				 */
+				DEBUG_LOG(info->line, "# BL BRK\n", 0);
+				info->errorcode = ERRCODE_INSERT_BREAK;
+			}
+			info->break_detected_cnt++;
+		} else {
+			/* The error does not look like a break, but could be
+			 * the end of one
+			 */
+			if (info->break_detected_cnt) {
+				DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
+				info->errorcode = ERRCODE_INSERT_BREAK;
+			} else {
+				if (info->errorcode == ERRCODE_INSERT_BREAK) {
+					info->icount.brk++;
+					*tty->flip.char_buf_ptr = 0;
+					*tty->flip.flag_buf_ptr = TTY_BREAK;
+					tty->flip.flag_buf_ptr++;
+					tty->flip.char_buf_ptr++;
+					tty->flip.count++;
+					info->icount.rx++;
+				}
+				*tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
+
+				if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) {
+					info->icount.parity++;
+					*tty->flip.flag_buf_ptr = TTY_PARITY;
+				} else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) {
+					info->icount.overrun++;
+					*tty->flip.flag_buf_ptr = TTY_OVERRUN;
+				} else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) {
+					info->icount.frame++;
+					*tty->flip.flag_buf_ptr = TTY_FRAME;
+				}
+				info->errorcode = 0;
+			}
+			info->break_detected_cnt = 0;
+		}
+	} else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
+		/* No error */
+		DLOG_INT_TRIG(
+		if (!log_int_trig1_pos) {
+			if (log_int_pos >= log_int_size) {
+				log_int_pos = 0;
+			}
+			log_int_trig0_pos = log_int_pos;
+			log_int(rdpc(), 0, 0);
+		}
+		);
+		*tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
+		*tty->flip.flag_buf_ptr = 0;
+	} else {
+		DEBUG_LOG(info->line, "ser_rx int but no data_avail  %08lX\n", data_read);
+	}
+
+
+	tty->flip.flag_buf_ptr++;
+	tty->flip.char_buf_ptr++;
+	tty->flip.count++;
+	info->icount.rx++;
+	data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+	if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
+		DEBUG_LOG(info->line, "ser_rx   %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read));
+		goto more_data;
+	}
+
+	tty_flip_buffer_push(info->tty);
+	return info;
+}
+
+extern _INLINE_
+struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
+{
+	unsigned char rstat;
+
+#ifdef SERIAL_DEBUG_INTR
+	printk("Interrupt from serport %d\n", i);
+#endif
+/*	DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */
+	if (!info->uses_dma_in) {
+		return handle_ser_rx_interrupt_no_dma(info);
+	}
+	/* DMA is used */
+	rstat = info->port[REG_STATUS];
+	if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
+		DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
+	}
+
+	if (rstat & SER_ERROR_MASK) {
+		unsigned char data;
+
+		info->last_rx_active_usec = GET_JIFFIES_USEC();
+		info->last_rx_active = jiffies;
+		/* If we got an error, we must reset it by reading the
+		 * data_in field
+		 */
+		data = info->port[REG_DATA];
+		DINTR1(DEBUG_LOG(info->line, "ser_rx!  %c\n", data));
+		DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat));
+		if (!data && (rstat & SER_FRAMING_ERR_MASK)) {
+			/* Most likely a break, but we get interrupts over and
+			 * over again.
+			 */
+
+			if (!info->break_detected_cnt) {
+				DEBUG_LOG(info->line, "#BRK start\n", 0);
+			}
+			if (rstat & SER_RXD_MASK) {
+				/* The RX pin is high now, so the break
+				 * must be over, but....
+				 * we can't really know if we will get another
+				 * last byte ending the break or not.
+				 * And we don't know if the byte (if any) will
+				 * have an error or look valid.
+				 */
+				DEBUG_LOG(info->line, "# BL BRK\n", 0);
+				info->errorcode = ERRCODE_INSERT_BREAK;
+			}
+			info->break_detected_cnt++;
+		} else {
+			/* The error does not look like a break, but could be
+			 * the end of one
+			 */
+			if (info->break_detected_cnt) {
+				DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
+				info->errorcode = ERRCODE_INSERT_BREAK;
+			} else {
+				if (info->errorcode == ERRCODE_INSERT_BREAK) {
+					info->icount.brk++;
+					add_char_and_flag(info, '\0', TTY_BREAK);
+				}
+
+				if (rstat & SER_PAR_ERR_MASK) {
+					info->icount.parity++;
+					add_char_and_flag(info, data, TTY_PARITY);
+				} else if (rstat & SER_OVERRUN_MASK) {
+					info->icount.overrun++;
+					add_char_and_flag(info, data, TTY_OVERRUN);
+				} else if (rstat & SER_FRAMING_ERR_MASK) {
+					info->icount.frame++;
+					add_char_and_flag(info, data, TTY_FRAME);
+				}
+
+				info->errorcode = 0;
+			}
+			info->break_detected_cnt = 0;
+			DEBUG_LOG(info->line, "#iERR s d %04X\n",
+			          ((rstat & SER_ERROR_MASK) << 8) | data);
+		}
+		PROCSTAT(ser_stat[info->line].early_errors_cnt++);
+	} else { /* It was a valid byte, now let the DMA do the rest */
+		unsigned long curr_time_u = GET_JIFFIES_USEC();
+		unsigned long curr_time = jiffies;
+
+		if (info->break_detected_cnt) {
+			/* Detect if this character is a new valid char or the
+			 * last char in a break sequence: If LSBits are 0 and
+			 * MSBits are high AND the time is close to the
+			 * previous interrupt we should discard it.
+			 */
+			long elapsed_usec =
+			  (curr_time - info->last_rx_active) * (1000000/HZ) +
+			  curr_time_u - info->last_rx_active_usec;
+			if (elapsed_usec < 2*info->char_time_usec) {
+				DEBUG_LOG(info->line, "FBRK %i\n", info->line);
+				/* Report as BREAK (error) and let
+				 * receive_chars_dma() handle it
+				 */
+				info->errorcode = ERRCODE_SET_BREAK;
+			} else {
+				DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line);
+			}
+			DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt);
+		}
+
+#ifdef SERIAL_DEBUG_INTR
+		printk("** OK, disabling ser_interrupts\n");
+#endif
+		e100_disable_serial_data_irq(info);
+		DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line));
+		info->break_detected_cnt = 0;
+
+		PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++);
+	}
+	/* Restarting the DMA never hurts */
+	*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
+	START_FLUSH_FAST_TIMER(info, "ser_int");
+	return info;
+} /* handle_ser_rx_interrupt */
+
+extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info)
+{
+	unsigned long flags;
+
+	if (info->x_char) {
+		unsigned char rstat;
+		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
+		save_flags(flags); cli();
+		rstat = info->port[REG_STATUS];
+		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
+
+		info->port[REG_TR_DATA] = info->x_char;
+		info->icount.tx++;
+		info->x_char = 0;
+		/* We must enable since it is disabled in ser_interrupt */
+		e100_enable_serial_tx_ready_irq(info);
+		restore_flags(flags);
+		return;
+	}
+	if (info->uses_dma_out) {
+		unsigned char rstat;
+		int i;
+		/* We only use normal tx interrupt when sending x_char */
+		DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
+		save_flags(flags); cli();
+		rstat = info->port[REG_STATUS];
+		DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
+		e100_disable_serial_tx_ready_irq(info);
+		if (info->tty->stopped)
+			rs_stop(info->tty);
+		/* Enable the DMA channel and tell it to continue */
+		e100_enable_txdma_channel(info);
+		/* Wait 12 cycles before doing the DMA command */
+		for(i = 6;  i > 0; i--)
+			nop();
+
+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue);
+		restore_flags(flags);
+		return;
+	}
+	/* Normal char-by-char interrupt */
+	if (info->xmit.head == info->xmit.tail
+	    || info->tty->stopped
+	    || info->tty->hw_stopped) {
+		DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", info->tty->stopped));
+		e100_disable_serial_tx_ready_irq(info);
+		info->tr_running = 0;
+		return;
+	}
+	DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
+	/* Send a byte, rs485 timing is critical so turn of ints */
+	save_flags(flags); cli();
+	info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
+	info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
+	info->icount.tx++;
+	if (info->xmit.head == info->xmit.tail) {
+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
+		if (info->rs485.enabled) {
+			/* Set a short timer to toggle RTS */
+			start_one_shot_timer(&fast_timers_rs485[info->line],
+			                     rs485_toggle_rts_timer_function,
+			                     (unsigned long)info,
+			                     info->char_time_usec*2,
+			                     "RS-485");
+		}
+#endif /* RS485 */
+		info->last_tx_active_usec = GET_JIFFIES_USEC();
+		info->last_tx_active = jiffies;
+		e100_disable_serial_tx_ready_irq(info);
+		info->tr_running = 0;
+		DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0));
+	} else {
+		/* We must enable since it is disabled in ser_interrupt */
+		e100_enable_serial_tx_ready_irq(info);
+	}
+	restore_flags(flags);
+
+	if (CIRC_CNT(info->xmit.head,
+		     info->xmit.tail,
+		     SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
+		rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+
+} /* handle_ser_tx_interrupt */
+
+/* result of time measurements:
+ * RX duration 54-60 us when doing something, otherwise 6-9 us
+ * ser_int duration: just sending: 8-15 us normally, up to 73 us
+ */
+static irqreturn_t
+ser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	static volatile int tx_started = 0;
+	struct e100_serial *info;
+	int i;
+	unsigned long flags;
+	unsigned long irq_mask1_rd;
+	unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */
+	int handled = 0;
+	static volatile unsigned long reentered_ready_mask = 0;
+
+	save_flags(flags); cli();
+	irq_mask1_rd = *R_IRQ_MASK1_RD;
+	/* First handle all rx interrupts with ints disabled */
+	info = rs_table;
+	irq_mask1_rd &= e100_ser_int_mask;
+	for (i = 0; i < NR_PORTS; i++) {
+		/* Which line caused the data irq? */
+		if (irq_mask1_rd & data_mask) {
+			handled = 1;
+			handle_ser_rx_interrupt(info);
+		}
+		info += 1;
+		data_mask <<= 2;
+	}
+	/* Handle tx interrupts with interrupts enabled so we
+	 * can take care of new data interrupts while transmitting
+	 * We protect the tx part with the tx_started flag.
+	 * We disable the tr_ready interrupts we are about to handle and
+	 * unblock the serial interrupt so new serial interrupts may come.
+	 *
+	 * If we get a new interrupt:
+	 *  - it migth be due to synchronous serial ports.
+	 *  - serial irq will be blocked by general irq handler.
+	 *  - async data will be handled above (sync will be ignored).
+	 *  - tx_started flag will prevent us from trying to send again and
+	 *    we will exit fast - no need to unblock serial irq.
+	 *  - Next (sync) serial interrupt handler will be runned with
+	 *    disabled interrupt due to restore_flags() at end of function,
+	 *    so sync handler will not be preempted or reentered.
+	 */
+	if (!tx_started) {
+		unsigned long ready_mask;
+		unsigned long
+		tx_started = 1;
+		/* Only the tr_ready interrupts left */
+		irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
+				 IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
+				 IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
+				 IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
+		while (irq_mask1_rd) {
+			/* Disable those we are about to handle */
+			*R_IRQ_MASK1_CLR = irq_mask1_rd;
+			/* Unblock the serial interrupt */
+			*R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
+
+			sti();
+			ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */
+			info = rs_table;
+			for (i = 0; i < NR_PORTS; i++) {
+				/* Which line caused the ready irq? */
+				if (irq_mask1_rd & ready_mask) {
+					handled = 1;
+					handle_ser_tx_interrupt(info);
+				}
+				info += 1;
+				ready_mask <<= 2;
+			}
+			/* handle_ser_tx_interrupt enables tr_ready interrupts */
+			cli();
+			/* Handle reentered TX interrupt */
+			irq_mask1_rd = reentered_ready_mask;
+		}
+		cli();
+		tx_started = 0;
+	} else {
+		unsigned long ready_mask;
+		ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
+					     IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
+					     IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
+					     IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
+		if (ready_mask) {
+			reentered_ready_mask |= ready_mask;
+			/* Disable those we are about to handle */
+			*R_IRQ_MASK1_CLR = ready_mask;
+			DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask));
+		}
+	}
+
+	restore_flags(flags);
+	return IRQ_RETVAL(handled);
+} /* ser_interrupt */
+#endif
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used to handle the "bottom half" processing for the
+ * serial driver, known also the "software interrupt" processing.
+ * This processing is done at the kernel interrupt level, after the
+ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON.  This
+ * is where time-consuming activities which can not be done in the
+ * interrupt driver proper are done; the interrupt driver schedules
+ * them using rs_sched_event(), and they get done here.
+ */
+static void
+do_softint(void *private_)
+{
+	struct e100_serial	*info = (struct e100_serial *) private_;
+	struct tty_struct	*tty;
+
+	tty = info->tty;
+	if (!tty)
+		return;
+
+	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
+		if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+		    tty->ldisc.write_wakeup)
+			(tty->ldisc.write_wakeup)(tty);
+		wake_up_interruptible(&tty->write_wait);
+	}
+}
+
+static int
+startup(struct e100_serial * info)
+{
+	unsigned long flags;
+	unsigned long xmit_page;
+	int i;
+
+	xmit_page = get_zeroed_page(GFP_KERNEL);
+	if (!xmit_page)
+		return -ENOMEM;
+
+	save_flags(flags);
+	cli();
+
+	/* if it was already initialized, skip this */
+
+	if (info->flags & ASYNC_INITIALIZED) {
+		restore_flags(flags);
+		free_page(xmit_page);
+		return 0;
+	}
+
+	if (info->xmit.buf)
+		free_page(xmit_page);
+	else
+		info->xmit.buf = (unsigned char *) xmit_page;
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf);
+#endif
+
+#ifdef CONFIG_SVINTO_SIM
+	/* Bits and pieces collected from below.  Better to have them
+	   in one ifdef:ed clause than to mix in a lot of ifdefs,
+	   right? */
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->xmit.head = info->xmit.tail = 0;
+	info->first_recv_buffer = info->last_recv_buffer = NULL;
+	info->recv_cnt = info->max_recv_cnt = 0;
+
+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
+		info->rec_descr[i].buf = NULL;
+
+	/* No real action in the simulator, but may set info important
+	   to ioctl. */
+	change_speed(info);
+#else
+
+	/*
+	 * Clear the FIFO buffers and disable them
+	 * (they will be reenabled in change_speed())
+	 */
+
+	/*
+	 * Reset the DMA channels and make sure their interrupts are cleared
+	 */
+
+	if (info->dma_in_enabled) {
+		info->uses_dma_in = 1;
+		e100_enable_rxdma_channel(info);
+
+		*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+
+		/* Wait until reset cycle is complete */
+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
+
+		/* Make sure the irqs are cleared */
+		*info->iclrintradr =
+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+	} else {
+		e100_disable_rxdma_channel(info);
+	}
+
+	if (info->dma_out_enabled) {
+		info->uses_dma_out = 1;
+		e100_enable_txdma_channel(info);
+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+
+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) ==
+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
+
+		/* Make sure the irqs are cleared */
+		*info->oclrintradr =
+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+			IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+	} else {
+		e100_disable_txdma_channel(info);
+	}
+
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->xmit.head = info->xmit.tail = 0;
+	info->first_recv_buffer = info->last_recv_buffer = NULL;
+	info->recv_cnt = info->max_recv_cnt = 0;
+
+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
+		info->rec_descr[i].buf = 0;
+
+	/*
+	 * and set the speed and other flags of the serial port
+	 * this will start the rx/tx as well
+	 */
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+	e100_enable_serial_data_irq(info);
+#endif
+	change_speed(info);
+
+	/* dummy read to reset any serial errors */
+
+	(void)info->port[REG_DATA];
+
+	/* enable the interrupts */
+	if (info->uses_dma_out)
+		e100_enable_txdma_irq(info);
+
+	e100_enable_rx_irq(info);
+
+	info->tr_running = 0; /* to be sure we don't lock up the transmitter */
+
+	/* setup the dma input descriptor and start dma */
+
+	start_receive(info);
+
+	/* for safety, make sure the descriptors last result is 0 bytes written */
+
+	info->tr_descr.sw_len = 0;
+	info->tr_descr.hw_len = 0;
+	info->tr_descr.status = 0;
+
+	/* enable RTS/DTR last */
+
+	e100_rts(info, 1);
+	e100_dtr(info, 1);
+
+#endif /* CONFIG_SVINTO_SIM */
+
+	info->flags |= ASYNC_INITIALIZED;
+
+	restore_flags(flags);
+	return 0;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void
+shutdown(struct e100_serial * info)
+{
+	unsigned long flags;
+	struct etrax_dma_descr *descr = info->rec_descr;
+	struct etrax_recv_buffer *buffer;
+	int i;
+
+#ifndef CONFIG_SVINTO_SIM
+	/* shut down the transmitter and receiver */
+	DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
+	e100_disable_rx(info);
+	info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
+
+	/* disable interrupts, reset dma channels */
+	if (info->uses_dma_in) {
+		e100_disable_rxdma_irq(info);
+		*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+		info->uses_dma_in = 0;
+	} else {
+		e100_disable_serial_data_irq(info);
+	}
+
+	if (info->uses_dma_out) {
+		e100_disable_txdma_irq(info);
+		info->tr_running = 0;
+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+		info->uses_dma_out = 0;
+	} else {
+		e100_disable_serial_tx_ready_irq(info);
+		info->tr_running = 0;
+	}
+
+#endif /* CONFIG_SVINTO_SIM */
+
+	if (!(info->flags & ASYNC_INITIALIZED))
+		return;
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("Shutting down serial port %d (irq %d)....\n", info->line,
+	       info->irq);
+#endif
+
+	save_flags(flags);
+	cli(); /* Disable interrupts */
+
+	if (info->xmit.buf) {
+		free_page((unsigned long)info->xmit.buf);
+		info->xmit.buf = NULL;
+	}
+
+	for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
+		if (descr[i].buf) {
+			buffer = phys_to_virt(descr[i].buf) - sizeof *buffer;
+			kfree(buffer);
+			descr[i].buf = 0;
+		}
+
+	if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+		/* hang up DTR and RTS if HUPCL is enabled */
+		e100_dtr(info, 0);
+		e100_rts(info, 0); /* could check CRTSCTS before doing this */
+	}
+
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->flags &= ~ASYNC_INITIALIZED;
+	restore_flags(flags);
+}
+
+
+/* change baud rate and other assorted parameters */
+
+static void
+change_speed(struct e100_serial *info)
+{
+	unsigned int cflag;
+	unsigned long xoff;
+	unsigned long flags;
+	/* first some safety checks */
+
+	if (!info->tty || !info->tty->termios)
+		return;
+	if (!info->port)
+		return;
+
+	cflag = info->tty->termios->c_cflag;
+
+	/* possibly, the tx/rx should be disabled first to do this safely */
+
+	/* change baud-rate and write it to the hardware */
+	if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
+		/* Special baudrate */
+		u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
+		unsigned long alt_source =
+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
+		/* R_ALT_SER_BAUDRATE selects the source */
+		DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n",
+		       (unsigned long)info->baud_base, info->custom_divisor));
+		if (info->baud_base == SERIAL_PRESCALE_BASE) {
+			/* 0, 2-65535 (0=65536) */
+			u16 divisor = info->custom_divisor;
+			/* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */
+			/* baudrate is 3.125MHz/custom_divisor */
+			alt_source =
+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) |
+				IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale);
+			alt_source = 0x11;
+			DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor));
+			*R_SERIAL_PRESCALE = divisor;
+			info->baud = SERIAL_PRESCALE_BASE/divisor;
+		}
+#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED
+		else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 &&
+			  info->custom_divisor == 1) ||
+			 (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ &&
+			  info->custom_divisor == 8)) {
+				/* ext_clk selected */
+				alt_source =
+					IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) |
+					IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern);
+				DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8));
+				info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8;
+			}
+		}
+#endif
+		else
+		{
+			/* Bad baudbase, we don't support using timer0
+			 * for baudrate.
+			 */
+			printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n",
+			       (unsigned long)info->baud_base, info->custom_divisor);
+		}
+		r_alt_ser_baudrate_shadow &= ~mask;
+		r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
+		*R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
+	} else {
+		/* Normal baudrate */
+		/* Make sure we use normal baudrate */
+		u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
+		unsigned long alt_source =
+			IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
+			IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
+		r_alt_ser_baudrate_shadow &= ~mask;
+		r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
+#ifndef CONFIG_SVINTO_SIM
+		*R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
+#endif /* CONFIG_SVINTO_SIM */
+
+		info->baud = cflag_to_baud(cflag);
+#ifndef CONFIG_SVINTO_SIM
+		info->port[REG_BAUD] = cflag_to_etrax_baud(cflag);
+#endif /* CONFIG_SVINTO_SIM */
+	}
+
+#ifndef CONFIG_SVINTO_SIM
+	/* start with default settings and then fill in changes */
+	save_flags(flags);
+	cli();
+	/* 8 bit, no/even parity */
+	info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) |
+			   IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) |
+			   IO_MASK(R_SERIAL0_REC_CTRL, rec_par));
+
+	/* 8 bit, no/even parity, 1 stop bit, no cts */
+	info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) |
+			   IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) |
+			   IO_MASK(R_SERIAL0_TR_CTRL, tr_par) |
+			   IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) |
+			   IO_MASK(R_SERIAL0_TR_CTRL, auto_cts));
+
+	if ((cflag & CSIZE) == CS7) {
+		/* set 7 bit mode */
+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
+	}
+
+	if (cflag & CSTOPB) {
+		/* set 2 stop bit mode */
+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits);
+	}
+
+	if (cflag & PARENB) {
+		/* enable parity */
+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
+	}
+
+	if (cflag & CMSPAR) {
+		/* enable stick parity, PARODD mean Mark which matches ETRAX */
+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick);
+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick);
+	}
+	if (cflag & PARODD) {
+		/* set odd parity (or Mark if CMSPAR) */
+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd);
+		info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd);
+	}
+
+	if (cflag & CRTSCTS) {
+		/* enable automatic CTS handling */
+		DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0));
+		info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active);
+	}
+
+	/* make sure the tx and rx are enabled */
+
+	info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable);
+	info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
+
+	/* actually write the control regs to the hardware */
+
+	info->port[REG_TR_CTRL] = info->tx_ctrl;
+	info->port[REG_REC_CTRL] = info->rx_ctrl;
+	xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty));
+	xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
+	if (info->tty->termios->c_iflag & IXON ) {
+		DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", STOP_CHAR(info->tty)));
+		xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
+	}
+
+	*((unsigned long *)&info->port[REG_XOFF]) = xoff;
+	restore_flags(flags);
+#endif /* !CONFIG_SVINTO_SIM */
+
+	update_char_time(info);
+
+} /* change_speed */
+
+/* start transmitting chars NOW */
+
+static void
+rs_flush_chars(struct tty_struct *tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	unsigned long flags;
+
+	if (info->tr_running ||
+	    info->xmit.head == info->xmit.tail ||
+	    tty->stopped ||
+	    tty->hw_stopped ||
+	    !info->xmit.buf)
+		return;
+
+#ifdef SERIAL_DEBUG_FLOW
+	printk("rs_flush_chars\n");
+#endif
+
+	/* this protection might not exactly be necessary here */
+
+	save_flags(flags);
+	cli();
+	start_transmit(info);
+	restore_flags(flags);
+}
+
+extern _INLINE_ int
+rs_raw_write(struct tty_struct * tty, int from_user,
+	  const unsigned char *buf, int count)
+{
+	int	c, ret = 0;
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	unsigned long flags;
+
+	/* first some sanity checks */
+
+	if (!tty || !info->xmit.buf || !tmp_buf)
+		return 0;
+
+#ifdef SERIAL_DEBUG_DATA
+	if (info->line == SERIAL_DEBUG_LINE)
+		printk("rs_raw_write (%d), status %d\n",
+		       count, info->port[REG_STATUS]);
+#endif
+
+#ifdef CONFIG_SVINTO_SIM
+	/* Really simple.  The output is here and now. */
+	SIMCOUT(buf, count);
+	return count;
+#endif
+	save_flags(flags);
+	DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
+	DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
+
+
+	/* the cli/restore_flags pairs below are needed because the
+	 * DMA interrupt handler moves the info->xmit values. the memcpy
+	 * needs to be in the critical region unfortunately, because we
+	 * need to read xmit values, memcpy, write xmit values in one
+	 * atomic operation... this could perhaps be avoided by more clever
+	 * design.
+	 */
+	if (from_user) {
+		down(&tmp_buf_sem);
+		while (1) {
+			int c1;
+			c = CIRC_SPACE_TO_END(info->xmit.head,
+					      info->xmit.tail,
+					      SERIAL_XMIT_SIZE);
+			if (count < c)
+				c = count;
+			if (c <= 0)
+				break;
+
+			c -= copy_from_user(tmp_buf, buf, c);
+			if (!c) {
+				if (!ret)
+					ret = -EFAULT;
+				break;
+			}
+			cli();
+			c1 = CIRC_SPACE_TO_END(info->xmit.head,
+					       info->xmit.tail,
+					       SERIAL_XMIT_SIZE);
+			if (c1 < c)
+				c = c1;
+			memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
+			info->xmit.head = ((info->xmit.head + c) &
+					   (SERIAL_XMIT_SIZE-1));
+			restore_flags(flags);
+			buf += c;
+			count -= c;
+			ret += c;
+		}
+		up(&tmp_buf_sem);
+	} else {
+		cli();
+		while (count) {
+			c = CIRC_SPACE_TO_END(info->xmit.head,
+					      info->xmit.tail,
+					      SERIAL_XMIT_SIZE);
+
+			if (count < c)
+				c = count;
+			if (c <= 0)
+				break;
+
+			memcpy(info->xmit.buf + info->xmit.head, buf, c);
+			info->xmit.head = (info->xmit.head + c) &
+				(SERIAL_XMIT_SIZE-1);
+			buf += c;
+			count -= c;
+			ret += c;
+		}
+		restore_flags(flags);
+	}
+
+	/* enable transmitter if not running, unless the tty is stopped
+	 * this does not need IRQ protection since if tr_running == 0
+	 * the IRQ's are not running anyway for this port.
+	 */
+	DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret));
+
+	if (info->xmit.head != info->xmit.tail &&
+	    !tty->stopped &&
+	    !tty->hw_stopped &&
+	    !info->tr_running) {
+		start_transmit(info);
+	}
+
+	return ret;
+} /* raw_raw_write() */
+
+static int
+rs_write(struct tty_struct * tty, int from_user,
+	 const unsigned char *buf, int count)
+{
+#if defined(CONFIG_ETRAX_RS485)
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+	if (info->rs485.enabled)
+	{
+		/* If we are in RS-485 mode, we need to toggle RTS and disable
+		 * the receiver before initiating a DMA transfer
+		 */
+#ifdef CONFIG_ETRAX_FAST_TIMER
+		/* Abort any started timer */
+		fast_timers_rs485[info->line].function = NULL;
+		del_fast_timer(&fast_timers_rs485[info->line]);
+#endif
+		e100_rts(info, info->rs485.rts_on_send);
+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
+		e100_disable_rx(info);
+		e100_enable_rx_irq(info);
+#endif
+
+		if (info->rs485.delay_rts_before_send > 0)
+			msleep(info->rs485.delay_rts_before_send);
+	}
+#endif /* CONFIG_ETRAX_RS485 */
+
+	count = rs_raw_write(tty, from_user, buf, count);
+
+#if defined(CONFIG_ETRAX_RS485)
+	if (info->rs485.enabled)
+	{
+		unsigned int val;
+		/* If we are in RS-485 mode the following has to be done:
+		 * wait until DMA is ready
+		 * wait on transmit shift register
+		 * toggle RTS
+		 * enable the receiver
+		 */
+
+		/* Sleep until all sent */
+		tty_wait_until_sent(tty, 0);
+#ifdef CONFIG_ETRAX_FAST_TIMER
+		/* Now sleep a little more so that shift register is empty */
+		schedule_usleep(info->char_time_usec * 2);
+#endif
+		/* wait on transmit shift register */
+		do{
+			get_lsr_info(info, &val);
+		}while (!(val & TIOCSER_TEMT));
+
+		e100_rts(info, info->rs485.rts_after_sent);
+
+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
+		e100_enable_rx(info);
+		e100_enable_rxdma_irq(info);
+#endif
+	}
+#endif /* CONFIG_ETRAX_RS485 */
+
+	return count;
+} /* rs_write */
+
+
+/* how much space is available in the xmit buffer? */
+
+static int
+rs_write_room(struct tty_struct *tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+/* How many chars are in the xmit buffer?
+ * This does not include any chars in the transmitter FIFO.
+ * Use wait_until_sent for waiting for FIFO drain.
+ */
+
+static int
+rs_chars_in_buffer(struct tty_struct *tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+/* discard everything in the xmit buffer */
+
+static void
+rs_flush_buffer(struct tty_struct *tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	unsigned long flags;
+
+	save_flags(flags);
+	cli();
+	info->xmit.head = info->xmit.tail = 0;
+	restore_flags(flags);
+
+	wake_up_interruptible(&tty->write_wait);
+
+	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+	    tty->ldisc.write_wakeup)
+		(tty->ldisc.write_wakeup)(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ *
+ * Since we use DMA we don't check for info->x_char in transmit_chars_dma(),
+ * but we do it in handle_ser_tx_interrupt().
+ * We disable DMA channel and enable tx ready interrupt and write the
+ * character when possible.
+ */
+static void rs_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	unsigned long flags;
+	save_flags(flags); cli();
+	if (info->uses_dma_out) {
+		/* Put the DMA on hold and disable the channel */
+		*info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold);
+		while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) !=
+		       IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold));
+		e100_disable_txdma_channel(info);
+	}
+
+	/* Must make sure transmitter is not stopped before we can transmit */
+	if (tty->stopped)
+		rs_start(tty);
+
+	/* Enable manual transmit interrupt and send from there */
+	DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch));
+	info->x_char = ch;
+	e100_enable_serial_tx_ready_irq(info);
+	restore_flags(flags);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void
+rs_throttle(struct tty_struct * tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+	char	buf[64];
+
+	printk("throttle %s: %lu....\n", tty_name(tty, buf),
+	       (unsigned long)tty->ldisc.chars_in_buffer(tty));
+#endif
+	DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
+
+	/* Do RTS before XOFF since XOFF might take some time */
+	if (tty->termios->c_cflag & CRTSCTS) {
+		/* Turn off RTS line */
+		e100_rts(info, 0);
+	}
+	if (I_IXOFF(tty))
+		rs_send_xchar(tty, STOP_CHAR(tty));
+
+}
+
+static void
+rs_unthrottle(struct tty_struct * tty)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+	char	buf[64];
+
+	printk("unthrottle %s: %lu....\n", tty_name(tty, buf),
+	       (unsigned long)tty->ldisc.chars_in_buffer(tty));
+#endif
+	DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
+	DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
+	/* Do RTS before XOFF since XOFF might take some time */
+	if (tty->termios->c_cflag & CRTSCTS) {
+		/* Assert RTS line  */
+		e100_rts(info, 1);
+	}
+
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			rs_send_xchar(tty, START_CHAR(tty));
+	}
+
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+static int
+get_serial_info(struct e100_serial * info,
+		struct serial_struct * retinfo)
+{
+	struct serial_struct tmp;
+
+	/* this is all probably wrong, there are a lot of fields
+	 * here that we don't have in e100_serial and maybe we
+	 * should set them to something else than 0.
+	 */
+
+	if (!retinfo)
+		return -EFAULT;
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.type = info->type;
+	tmp.line = info->line;
+	tmp.port = (int)info->port;
+	tmp.irq = info->irq;
+	tmp.flags = info->flags;
+	tmp.baud_base = info->baud_base;
+	tmp.close_delay = info->close_delay;
+	tmp.closing_wait = info->closing_wait;
+	tmp.custom_divisor = info->custom_divisor;
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int
+set_serial_info(struct e100_serial *info,
+		struct serial_struct *new_info)
+{
+	struct serial_struct new_serial;
+	struct e100_serial old_info;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+		return -EFAULT;
+
+	old_info = *info;
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((new_serial.type != info->type) ||
+		    (new_serial.close_delay != info->close_delay) ||
+		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (info->flags & ~ASYNC_USR_MASK)))
+			return -EPERM;
+		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+			       (new_serial.flags & ASYNC_USR_MASK));
+		goto check_and_exit;
+	}
+
+	if (info->count > 1)
+		return -EBUSY;
+
+	/*
+	 * OK, past this point, all the error checking has been done.
+	 * At this point, we start making changes.....
+	 */
+
+	info->baud_base = new_serial.baud_base;
+	info->flags = ((info->flags & ~ASYNC_FLAGS) |
+		       (new_serial.flags & ASYNC_FLAGS));
+	info->custom_divisor = new_serial.custom_divisor;
+	info->type = new_serial.type;
+	info->close_delay = new_serial.close_delay;
+	info->closing_wait = new_serial.closing_wait;
+	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ check_and_exit:
+	if (info->flags & ASYNC_INITIALIZED) {
+		change_speed(info);
+	} else
+		retval = startup(info);
+	return retval;
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * 	    is emptied.  On bus types like RS485, the transmitter must
+ * 	    release the bus after transmitting. This must be done when
+ * 	    the transmit shift register is empty, not be done when the
+ * 	    transmit holding register is empty.  This functionality
+ * 	    allows an RS485 driver to be written in user space.
+ */
+static int
+get_lsr_info(struct e100_serial * info, unsigned int *value)
+{
+	unsigned int result = TIOCSER_TEMT;
+#ifndef CONFIG_SVINTO_SIM
+	unsigned long curr_time = jiffies;
+	unsigned long curr_time_usec = GET_JIFFIES_USEC();
+	unsigned long elapsed_usec =
+		(curr_time - info->last_tx_active) * 1000000/HZ +
+		curr_time_usec - info->last_tx_active_usec;
+
+	if (info->xmit.head != info->xmit.tail ||
+	    elapsed_usec < 2*info->char_time_usec) {
+		result = 0;
+	}
+#endif
+
+	if (copy_to_user(value, &result, sizeof(int)))
+		return -EFAULT;
+	return 0;
+}
+
+#ifdef SERIAL_DEBUG_IO
+struct state_str
+{
+	int state;
+	const char *str;
+};
+
+const struct state_str control_state_str[] = {
+	{TIOCM_DTR, "DTR" },
+	{TIOCM_RTS, "RTS"},
+	{TIOCM_ST, "ST?" },
+	{TIOCM_SR, "SR?" },
+	{TIOCM_CTS, "CTS" },
+	{TIOCM_CD, "CD" },
+	{TIOCM_RI, "RI" },
+	{TIOCM_DSR, "DSR" },
+	{0, NULL }
+};
+
+char *get_control_state_str(int MLines, char *s)
+{
+	int i = 0;
+
+	s[0]='\0';
+	while (control_state_str[i].str != NULL) {
+		if (MLines & control_state_str[i].state) {
+			if (s[0] != '\0') {
+				strcat(s, ", ");
+			}
+			strcat(s, control_state_str[i].str);
+		}
+		i++;
+	}
+	return s;
+}
+#endif
+
+static int
+get_modem_info(struct e100_serial * info, unsigned int *value)
+{
+	unsigned int result;
+	/* Polarity isn't verified */
+#if 0 /*def SERIAL_DEBUG_IO  */
+
+	printk("get_modem_info: RTS: %i DTR: %i CD: %i RI: %i DSR: %i CTS: %i\n",
+	       E100_RTS_GET(info),
+	       E100_DTR_GET(info),
+	       E100_CD_GET(info),
+	       E100_RI_GET(info),
+	       E100_DSR_GET(info),
+	       E100_CTS_GET(info));
+#endif
+
+	result =
+		(!E100_RTS_GET(info) ? TIOCM_RTS : 0)
+		| (!E100_DTR_GET(info) ? TIOCM_DTR : 0)
+		| (!E100_RI_GET(info) ? TIOCM_RNG : 0)
+		| (!E100_DSR_GET(info) ? TIOCM_DSR : 0)
+		| (!E100_CD_GET(info) ? TIOCM_CAR : 0)
+		| (!E100_CTS_GET(info) ? TIOCM_CTS : 0);
+
+#ifdef SERIAL_DEBUG_IO
+	printk("e100ser: modem state: %i 0x%08X\n", result, result);
+	{
+		char s[100];
+
+		get_control_state_str(result, s);
+		printk("state: %s\n", s);
+	}
+#endif
+	if (copy_to_user(value, &result, sizeof(int)))
+		return -EFAULT;
+	return 0;
+}
+
+
+static int
+set_modem_info(struct e100_serial * info, unsigned int cmd,
+	       unsigned int *value)
+{
+	unsigned int arg;
+
+	if (copy_from_user(&arg, value, sizeof(int)))
+		return -EFAULT;
+
+	switch (cmd) {
+	case TIOCMBIS:
+		if (arg & TIOCM_RTS) {
+			e100_rts(info, 1);
+		}
+		if (arg & TIOCM_DTR) {
+			e100_dtr(info, 1);
+		}
+		/* Handle FEMALE behaviour */
+		if (arg & TIOCM_RI) {
+			e100_ri_out(info, 1);
+		}
+		if (arg & TIOCM_CD) {
+			e100_cd_out(info, 1);
+		}
+		break;
+	case TIOCMBIC:
+		if (arg & TIOCM_RTS) {
+			e100_rts(info, 0);
+		}
+		if (arg & TIOCM_DTR) {
+			e100_dtr(info, 0);
+		}
+		/* Handle FEMALE behaviour */
+		if (arg & TIOCM_RI) {
+			e100_ri_out(info, 0);
+		}
+		if (arg & TIOCM_CD) {
+			e100_cd_out(info, 0);
+		}
+		break;
+	case TIOCMSET:
+		e100_rts(info, arg & TIOCM_RTS);
+		e100_dtr(info, arg & TIOCM_DTR);
+		/* Handle FEMALE behaviour */
+		e100_ri_out(info, arg & TIOCM_RI);
+		e100_cd_out(info, arg & TIOCM_CD);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+static void
+rs_break(struct tty_struct *tty, int break_state)
+{
+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+	unsigned long flags;
+
+	if (!info->port)
+		return;
+
+	save_flags(flags);
+	cli();
+	if (break_state == -1) {
+		/* Go to manual mode and set the txd pin to 0 */
+		info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */
+	} else {
+		info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */
+	}
+	info->port[REG_TR_CTRL] = info->tx_ctrl;
+	restore_flags(flags);
+}
+
+static int
+rs_ioctl(struct tty_struct *tty, struct file * file,
+	 unsigned int cmd, unsigned long arg)
+{
+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD)  &&
+	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+			return -EIO;
+	}
+
+	switch (cmd) {
+		case TIOCMGET:
+			return get_modem_info(info, (unsigned int *) arg);
+		case TIOCMBIS:
+		case TIOCMBIC:
+		case TIOCMSET:
+			return set_modem_info(info, cmd, (unsigned int *) arg);
+		case TIOCGSERIAL:
+			return get_serial_info(info,
+					       (struct serial_struct *) arg);
+		case TIOCSSERIAL:
+			return set_serial_info(info,
+					       (struct serial_struct *) arg);
+		case TIOCSERGETLSR: /* Get line status register */
+			return get_lsr_info(info, (unsigned int *) arg);
+
+		case TIOCSERGSTRUCT:
+			if (copy_to_user((struct e100_serial *) arg,
+					 info, sizeof(struct e100_serial)))
+				return -EFAULT;
+			return 0;
+
+#if defined(CONFIG_ETRAX_RS485)
+		case TIOCSERSETRS485:
+		{
+			struct rs485_control rs485ctrl;
+			if (copy_from_user(&rs485ctrl, (struct rs485_control*)arg, sizeof(rs485ctrl)))
+				return -EFAULT;
+
+			return e100_enable_rs485(tty, &rs485ctrl);
+		}
+
+		case TIOCSERWRRS485:
+		{
+			struct rs485_write rs485wr;
+			if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr)))
+				return -EFAULT;
+
+			return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size);
+		}
+#endif
+
+		default:
+			return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static void
+rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+	if (tty->termios->c_cflag == old_termios->c_cflag &&
+	    tty->termios->c_iflag == old_termios->c_iflag)
+		return;
+
+	change_speed(info);
+
+	/* Handle turning off CRTSCTS */
+	if ((old_termios->c_cflag & CRTSCTS) &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		rs_start(tty);
+	}
+
+}
+
+/* In debugport.c - register a console write function that uses the normal
+ * serial driver
+ */
+typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len);
+
+extern debugport_write_function debug_write_function;
+
+static int rs_debug_write_function(int i, const char *buf, unsigned int len)
+{
+	int cnt;
+	int written = 0;
+        struct tty_struct *tty;
+        static int recurse_cnt = 0;
+
+        tty = rs_table[i].tty;
+        if (tty)  {
+		unsigned long flags;
+		if (recurse_cnt > 5) /* We skip this debug output */
+			return 1;
+
+		local_irq_save(flags);
+		recurse_cnt++;
+		local_irq_restore(flags);
+                do {
+                        cnt = rs_write(tty, 0, buf + written, len);
+                        if (cnt >= 0) {
+				written += cnt;
+                                buf += cnt;
+                                len -= cnt;
+                        } else
+                                len = cnt;
+                } while(len > 0);
+		local_irq_save(flags);
+		recurse_cnt--;
+		local_irq_restore(flags);
+                return 1;
+        }
+        return 0;
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed.  First, we
+ * wait for the last remaining data to be sent.  Then, we unlink its
+ * S structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void
+rs_close(struct tty_struct *tty, struct file * filp)
+{
+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+	unsigned long flags;
+
+	if (!info)
+		return;
+
+	/* interrupts are disabled for this entire function */
+
+	save_flags(flags);
+	cli();
+
+	if (tty_hung_up_p(filp)) {
+		restore_flags(flags);
+		return;
+	}
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("[%d] rs_close ttyS%d, count = %d\n", current->pid,
+	       info->line, info->count);
+#endif
+	if ((tty->count == 1) && (info->count != 1)) {
+		/*
+		 * Uh, oh.  tty->count is 1, which means that the tty
+		 * structure will be freed.  Info->count should always
+		 * be one in these conditions.  If it's greater than
+		 * one, we've got real problems, since it means the
+		 * serial port won't be shutdown.
+		 */
+		printk(KERN_CRIT
+		       "rs_close: bad serial port count; tty->count is 1, "
+		       "info->count is %d\n", info->count);
+		info->count = 1;
+	}
+	if (--info->count < 0) {
+		printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n",
+		       info->line, info->count);
+		info->count = 0;
+	}
+	if (info->count) {
+		restore_flags(flags);
+		return;
+	}
+	info->flags |= ASYNC_CLOSING;
+	/*
+	 * Save the termios structure, since this port may have
+	 * separate termios for callout and dialin.
+	 */
+	if (info->flags & ASYNC_NORMAL_ACTIVE)
+		info->normal_termios = *tty->termios;
+	/*
+	 * Now we wait for the transmit buffer to clear; and we notify
+	 * the line discipline to only process XON/XOFF characters.
+	 */
+	tty->closing = 1;
+	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, info->closing_wait);
+	/*
+	 * At this point we stop accepting input.  To do this, we
+	 * disable the serial receiver and the DMA receive interrupt.
+	 */
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+	e100_disable_serial_data_irq(info);
+#endif
+
+#ifndef CONFIG_SVINTO_SIM
+	e100_disable_rx(info);
+	e100_disable_rx_irq(info);
+
+	if (info->flags & ASYNC_INITIALIZED) {
+		/*
+		 * Before we drop DTR, make sure the UART transmitter
+		 * has completely drained; this is especially
+		 * important as we have a transmit FIFO!
+		 */
+		rs_wait_until_sent(tty, HZ);
+	}
+#endif
+
+	shutdown(info);
+	if (tty->driver->flush_buffer)
+		tty->driver->flush_buffer(tty);
+	if (tty->ldisc.flush_buffer)
+		tty->ldisc.flush_buffer(tty);
+	tty->closing = 0;
+	info->event = 0;
+	info->tty = 0;
+	if (info->blocked_open) {
+		if (info->close_delay) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(info->close_delay);
+		}
+		wake_up_interruptible(&info->open_wait);
+	}
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&info->close_wait);
+	restore_flags(flags);
+
+	/* port closed */
+
+#if defined(CONFIG_ETRAX_RS485)
+	if (info->rs485.enabled) {
+		info->rs485.enabled = 0;
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+		*R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+			       rs485_port_g_bit, 0);
+#endif
+#if defined(CONFIG_ETRAX_RS485_LTC1387)
+		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+			       CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0);
+		REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+			       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0);
+#endif
+	}
+#endif
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	unsigned long orig_jiffies;
+	struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+	unsigned long curr_time = jiffies;
+	unsigned long curr_time_usec = GET_JIFFIES_USEC();
+	long elapsed_usec =
+		(curr_time - info->last_tx_active) * (1000000/HZ) +
+		curr_time_usec - info->last_tx_active_usec;
+
+	/*
+	 * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
+	 * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
+	 */
+	orig_jiffies = jiffies;
+	while (info->xmit.head != info->xmit.tail || /* More in send queue */
+	       (*info->ostatusadr & 0x007f) ||  /* more in FIFO */
+	       (elapsed_usec < 2*info->char_time_usec)) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(1);
+		if (signal_pending(current))
+			break;
+		if (timeout && time_after(jiffies, orig_jiffies + timeout))
+			break;
+		curr_time = jiffies;
+		curr_time_usec = GET_JIFFIES_USEC();
+		elapsed_usec =
+			(curr_time - info->last_tx_active) * (1000000/HZ) +
+			curr_time_usec - info->last_tx_active_usec;
+	}
+	set_current_state(TASK_RUNNING);
+}
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+void
+rs_hangup(struct tty_struct *tty)
+{
+	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+
+	rs_flush_buffer(tty);
+	shutdown(info);
+	info->event = 0;
+	info->count = 0;
+	info->flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->tty = 0;
+	wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int
+block_til_ready(struct tty_struct *tty, struct file * filp,
+		struct e100_serial *info)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	unsigned long	flags;
+	int		retval;
+	int		do_clocal = 0, extra_count = 0;
+
+	/*
+	 * If the device is in the middle of being closed, then block
+	 * until it's done, and then try again.
+	 */
+	if (tty_hung_up_p(filp) ||
+	    (info->flags & ASYNC_CLOSING)) {
+		if (info->flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+		if (info->flags & ASYNC_HUP_NOTIFY)
+			return -EAGAIN;
+		else
+			return -ERESTARTSYS;
+#else
+		return -EAGAIN;
+#endif
+	}
+
+	/*
+	 * If non-blocking mode is set, or the port is not enabled,
+	 * then make the check up front and then exit.
+	 */
+	if ((filp->f_flags & O_NONBLOCK) ||
+	    (tty->flags & (1 << TTY_IO_ERROR))) {
+		info->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+
+	if (tty->termios->c_cflag & CLOCAL) {
+			do_clocal = 1;
+	}
+
+	/*
+	 * Block waiting for the carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, info->count is dropped by one, so that
+	 * rs_close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+	retval = 0;
+	add_wait_queue(&info->open_wait, &wait);
+#ifdef SERIAL_DEBUG_OPEN
+	printk("block_til_ready before block: ttyS%d, count = %d\n",
+	       info->line, info->count);
+#endif
+	save_flags(flags);
+	cli();
+	if (!tty_hung_up_p(filp)) {
+		extra_count++;
+		info->count--;
+	}
+	restore_flags(flags);
+	info->blocked_open++;
+	while (1) {
+		save_flags(flags);
+		cli();
+		/* assert RTS and DTR */
+		e100_rts(info, 1);
+		e100_dtr(info, 1);
+		restore_flags(flags);
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (tty_hung_up_p(filp) ||
+		    !(info->flags & ASYNC_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+			if (info->flags & ASYNC_HUP_NOTIFY)
+				retval = -EAGAIN;
+			else
+				retval = -ERESTARTSYS;
+#else
+			retval = -EAGAIN;
+#endif
+			break;
+		}
+		if (!(info->flags & ASYNC_CLOSING) && do_clocal)
+			/* && (do_clocal || DCD_IS_ASSERTED) */
+			break;
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+#ifdef SERIAL_DEBUG_OPEN
+		printk("block_til_ready blocking: ttyS%d, count = %d\n",
+		       info->line, info->count);
+#endif
+		schedule();
+	}
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&info->open_wait, &wait);
+	if (extra_count)
+		info->count++;
+	info->blocked_open--;
+#ifdef SERIAL_DEBUG_OPEN
+	printk("block_til_ready after blocking: ttyS%d, count = %d\n",
+	       info->line, info->count);
+#endif
+	if (retval)
+		return retval;
+	info->flags |= ASYNC_NORMAL_ACTIVE;
+	return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened.
+ * It performs the serial-specific initialization for the tty structure.
+ */
+static int
+rs_open(struct tty_struct *tty, struct file * filp)
+{
+	struct e100_serial	*info;
+	int 			retval, line;
+	unsigned long           page;
+
+	/* find which port we want to open */
+
+	line = tty->index;
+
+	if (line < 0 || line >= NR_PORTS)
+		return -ENODEV;
+
+	/* find the corresponding e100_serial struct in the table */
+	info = rs_table + line;
+
+	/* don't allow the opening of ports that are not enabled in the HW config */
+	if (!info->enabled)
+		return -ENODEV;
+
+#ifdef SERIAL_DEBUG_OPEN
+        printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name,
+ 	       info->count);
+#endif
+
+	info->count++;
+	tty->driver_data = info;
+	info->tty = tty;
+
+	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	if (!tmp_buf) {
+		page = get_zeroed_page(GFP_KERNEL);
+		if (!page) {
+			return -ENOMEM;
+		}
+		if (tmp_buf)
+			free_page(page);
+		else
+			tmp_buf = (unsigned char *) page;
+	}
+
+	/*
+	 * If the port is in the middle of closing, bail out now
+	 */
+	if (tty_hung_up_p(filp) ||
+	    (info->flags & ASYNC_CLOSING)) {
+		if (info->flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+		return ((info->flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+#else
+		return -EAGAIN;
+#endif
+	}
+
+	/*
+	 * Start up the serial port
+	 */
+
+	retval = startup(info);
+	if (retval)
+		return retval;
+
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+#ifdef SERIAL_DEBUG_OPEN
+		printk("rs_open returning after block_til_ready with %d\n",
+		       retval);
+#endif
+		return retval;
+	}
+
+	if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
+		*tty->termios = info->normal_termios;
+		change_speed(info);
+	}
+
+#ifdef SERIAL_DEBUG_OPEN
+	printk("rs_open ttyS%d successful...\n", info->line);
+#endif
+	DLOG_INT_TRIG( log_int_pos = 0);
+
+	DFLIP(	if (info->line == SERIAL_DEBUG_LINE) {
+			info->icount.rx = 0;
+		} );
+
+	return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+extern _INLINE_ int line_info(char *buf, struct e100_serial *info)
+{
+	char	stat_buf[30];
+	int	ret;
+	unsigned long tmp;
+
+	ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
+		      info->line, (unsigned long)info->port, info->irq);
+
+	if (!info->port || (info->type == PORT_UNKNOWN)) {
+		ret += sprintf(buf+ret, "\n");
+		return ret;
+	}
+
+	stat_buf[0] = 0;
+	stat_buf[1] = 0;
+	if (!E100_RTS_GET(info))
+		strcat(stat_buf, "|RTS");
+	if (!E100_CTS_GET(info))
+		strcat(stat_buf, "|CTS");
+	if (!E100_DTR_GET(info))
+		strcat(stat_buf, "|DTR");
+	if (!E100_DSR_GET(info))
+		strcat(stat_buf, "|DSR");
+	if (!E100_CD_GET(info))
+		strcat(stat_buf, "|CD");
+	if (!E100_RI_GET(info))
+		strcat(stat_buf, "|RI");
+
+	ret += sprintf(buf+ret, " baud:%d", info->baud);
+
+	ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+		       (unsigned long)info->icount.tx,
+		       (unsigned long)info->icount.rx);
+	tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+	if (tmp) {
+		ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
+			       (unsigned long)tmp,
+			       (unsigned long)SERIAL_XMIT_SIZE);
+	}
+
+	ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
+		       (unsigned long)info->recv_cnt,
+		       (unsigned long)info->max_recv_cnt);
+
+#if 1
+	if (info->tty) {
+
+		if (info->tty->stopped)
+			ret += sprintf(buf+ret, " stopped:%i",
+				       (int)info->tty->stopped);
+		if (info->tty->hw_stopped)
+			ret += sprintf(buf+ret, " hw_stopped:%i",
+				       (int)info->tty->hw_stopped);
+	}
+
+	{
+		unsigned char rstat = info->port[REG_STATUS];
+		if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
+			ret += sprintf(buf+ret, " xoff_detect:1");
+	}
+
+#endif
+
+
+
+
+	if (info->icount.frame)
+		ret += sprintf(buf+ret, " fe:%lu",
+			       (unsigned long)info->icount.frame);
+
+	if (info->icount.parity)
+		ret += sprintf(buf+ret, " pe:%lu",
+			       (unsigned long)info->icount.parity);
+
+	if (info->icount.brk)
+		ret += sprintf(buf+ret, " brk:%lu",
+			       (unsigned long)info->icount.brk);
+
+	if (info->icount.overrun)
+		ret += sprintf(buf+ret, " oe:%lu",
+			       (unsigned long)info->icount.overrun);
+
+	/*
+	 * Last thing is the RS-232 status lines
+	 */
+	ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+	return ret;
+}
+
+int rs_read_proc(char *page, char **start, off_t off, int count,
+		 int *eof, void *data)
+{
+	int i, len = 0, l;
+	off_t	begin = 0;
+
+	len += sprintf(page, "serinfo:1.0 driver:%s\n",
+		       serial_version);
+	for (i = 0; i < NR_PORTS && len < 4000; i++) {
+		if (!rs_table[i].enabled)
+			continue;
+		l = line_info(page + len, &rs_table[i]);
+		len += l;
+		if (len+begin > off+count)
+			goto done;
+		if (len+begin < off) {
+			begin += len;
+			len = 0;
+		}
+	}
+#ifdef DEBUG_LOG_INCLUDED
+	for (i = 0; i < debug_log_pos; i++) {
+		len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
+		len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
+		if (len+begin > off+count)
+			goto done;
+		if (len+begin < off) {
+			begin += len;
+			len = 0;
+		}
+	}
+	len += sprintf(page + len, "debug_log %i/%i  %li bytes\n",
+		       i, DEBUG_LOG_SIZE, begin+len);
+	debug_log_pos = 0;
+#endif
+
+	*eof = 1;
+done:
+	if (off >= len+begin)
+		return 0;
+	*start = page + (off-begin);
+	return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/* Finally, routines used to initialize the serial driver. */
+
+static void
+show_serial_version(void)
+{
+	printk(KERN_INFO
+	       "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+	       &serial_version[11]); /* "$Revision: x.yy" */
+}
+
+/* rs_init inits the driver at boot (using the module_init chain) */
+
+static struct tty_operations rs_ops = {
+	.open = rs_open,
+	.close = rs_close,
+	.write = rs_write,
+	.flush_chars = rs_flush_chars,
+	.write_room = rs_write_room,
+	.chars_in_buffer = rs_chars_in_buffer,
+	.flush_buffer = rs_flush_buffer,
+	.ioctl = rs_ioctl,
+	.throttle = rs_throttle,
+        .unthrottle = rs_unthrottle,
+	.set_termios = rs_set_termios,
+	.stop = rs_stop,
+	.start = rs_start,
+	.hangup = rs_hangup,
+	.break_ctl = rs_break,
+	.send_xchar = rs_send_xchar,
+	.wait_until_sent = rs_wait_until_sent,
+	.read_proc = rs_read_proc,
+};
+
+static int __init
+rs_init(void)
+{
+	int i;
+	struct e100_serial *info;
+	struct tty_driver *driver = alloc_tty_driver(NR_PORTS);
+
+	if (!driver)
+		return -ENOMEM;
+
+	show_serial_version();
+
+	/* Setup the timed flush handler system */
+
+#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER)
+	init_timer(&flush_timer);
+	flush_timer.function = timed_flush_handler;
+	mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
+#endif
+
+	/* Initialize the tty_driver structure */
+
+	driver->driver_name = "serial";
+	driver->name = "ttyS";
+	driver->major = TTY_MAJOR;
+	driver->minor_start = 64;
+	driver->type = TTY_DRIVER_TYPE_SERIAL;
+	driver->subtype = SERIAL_TYPE_NORMAL;
+	driver->init_termios = tty_std_termios;
+	driver->init_termios.c_cflag =
+		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+	driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+	driver->termios = serial_termios;
+	driver->termios_locked = serial_termios_locked;
+
+	tty_set_operations(driver, &rs_ops);
+        serial_driver = driver;
+	if (tty_register_driver(driver))
+		panic("Couldn't register serial driver\n");
+	/* do some initializing for the separate ports */
+
+	for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
+		info->uses_dma_in = 0;
+		info->uses_dma_out = 0;
+		info->line = i;
+		info->tty = 0;
+		info->type = PORT_ETRAX;
+		info->tr_running = 0;
+		info->forced_eop = 0;
+		info->baud_base = DEF_BAUD_BASE;
+		info->custom_divisor = 0;
+		info->flags = 0;
+		info->close_delay = 5*HZ/10;
+		info->closing_wait = 30*HZ;
+		info->x_char = 0;
+		info->event = 0;
+		info->count = 0;
+		info->blocked_open = 0;
+		info->normal_termios = driver->init_termios;
+		init_waitqueue_head(&info->open_wait);
+		init_waitqueue_head(&info->close_wait);
+		info->xmit.buf = NULL;
+		info->xmit.tail = info->xmit.head = 0;
+		info->first_recv_buffer = info->last_recv_buffer = NULL;
+		info->recv_cnt = info->max_recv_cnt = 0;
+		info->last_tx_active_usec = 0;
+		info->last_tx_active = 0;
+
+#if defined(CONFIG_ETRAX_RS485)
+		/* Set sane defaults */
+		info->rs485.rts_on_send = 0;
+		info->rs485.rts_after_sent = 1;
+		info->rs485.delay_rts_before_send = 0;
+		info->rs485.enabled = 0;
+#endif
+		INIT_WORK(&info->work, do_softint, info);
+
+		if (info->enabled) {
+			printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
+			       serial_driver->name, info->line, (unsigned int)info->port);
+		}
+	}
+#ifdef CONFIG_ETRAX_FAST_TIMER
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+	memset(fast_timers, 0, sizeof(fast_timers));
+#endif
+#ifdef CONFIG_ETRAX_RS485
+	memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485));
+#endif
+	fast_timer_init();
+#endif
+
+#ifndef CONFIG_SVINTO_SIM
+	/* Not needed in simulator.  May only complicate stuff. */
+	/* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
+
+	if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL))
+		panic("irq8");
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+	if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL))
+		panic("irq22");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+	if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL))
+		panic("irq23");
+#endif
+#endif
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
+	if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL))
+		panic("irq24");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
+	if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL))
+		panic("irq25");
+#endif
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+	/* DMA Shared with par0 (and SCSI0 and ATA) */
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+	if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL))
+		panic("irq18");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+	if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL))
+		panic("irq19");
+#endif
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+	/* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
+	if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL))
+		panic("irq20");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
+	if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL))
+		panic("irq21");
+#endif
+#endif
+
+#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
+	if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT,
+		       "fast serial dma timeout", NULL)) {
+		printk(KERN_CRIT "err: timer1 irq\n");
+	}
+#endif
+#endif /* CONFIG_SVINTO_SIM */
+	debug_write_function = rs_debug_write_function;
+	return 0;
+}
+
+/* this makes sure that rs_init is called during kernel boot */
+
+module_init(rs_init);
+
+/*
+ * register_serial and unregister_serial allows for serial ports to be
+ * configured at run-time, to support PCMCIA modems.
+ */
+int
+register_serial(struct serial_struct *req)
+{
+	return -1;
+}
+
+void unregister_serial(int line)
+{
+}