Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h
new file mode 100644
index 0000000..762cbc7
--- /dev/null
+++ b/include/asm-arm/arch-l7200/aux_reg.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/asm-arm/arch-l7200/aux_reg.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 08-02-2000 SJH Created file
+ */
+#ifndef _ASM_ARCH_AUXREG_H
+#define _ASM_ARCH_AUXREG_H
+
+#include <asm/arch/hardware.h>
+
+#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE))
+
+/*
+ * Auxillary register values
+ */
+#define AUX_CLEAR 0x00000000
+#define AUX_DIAG_LED_ON 0x00000002
+#define AUX_RTS_UART1 0x00000004
+#define AUX_DTR_UART1 0x00000008
+#define AUX_KBD_COLUMN_12_HIGH 0x00000010
+#define AUX_KBD_COLUMN_12_OFF 0x00000020
+#define AUX_KBD_COLUMN_13_HIGH 0x00000040
+#define AUX_KBD_COLUMN_13_OFF 0x00000080
+
+#endif
diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S
new file mode 100644
index 0000000..8464733
--- /dev/null
+++ b/include/asm-arm/arch-l7200/debug-macro.S
@@ -0,0 +1,40 @@
+/* linux/include/asm-arm/arch-l7200/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .equ io_virt, IO_BASE
+ .equ io_phys, IO_START
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #io_phys @ physical base address
+ movne \rx, #io_virt @ virtual address
+ add \rx, \rx, #0x00044000 @ UART1
+@ add \rx, \rx, #0x00045000 @ UART2
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0] @ UARTDR
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
+ bne 1001b
+ .endm
diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h
new file mode 100644
index 0000000..6595b38
--- /dev/null
+++ b/include/asm-arm/arch-l7200/dma.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm-arm/arch-l7200/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 08-29-2000 SJH Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS 0xd0000000
+#define MAX_DMA_CHANNELS 0
+
+#define DMA_S0 0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S
new file mode 100644
index 0000000..8b6342d
--- /dev/null
+++ b/include/asm-arm/arch-l7200/entry-macro.S
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-l7200/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/hardware.h>
+
+ .equ irq_base_addr, IO_BASE_2
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ mov \irqstat, #irq_base_addr @ Virt addr IRQ regs
+ add \irqstat, \irqstat, #0x00001000 @ Status reg
+ ldr \irqstat, [\irqstat, #0] @ get interrupts
+ mov \irqnr, #0
+1001: tst \irqstat, #1
+ addeq \irqnr, \irqnr, #1
+ moveq \irqstat, \irqstat, lsr #1
+ tsteq \irqnr, #32
+ beq 1001b
+ teq \irqnr, #32
+ .endm
+
diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h
new file mode 100644
index 0000000..6f20962
--- /dev/null
+++ b/include/asm-arm/arch-l7200/gp_timers.h
@@ -0,0 +1,42 @@
+/*
+ * linux/include/asm-arm/arch-l7200/gp_timers.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 07-28-2000 SJH Created file
+ * 08-02-2000 SJH Used structure for registers
+ */
+#ifndef _ASM_ARCH_GPTIMERS_H
+#define _ASM_ARCH_GPTIMERS_H
+
+#include <asm/arch/hardware.h>
+
+/*
+ * Layout of L7200 general purpose timer registers
+ */
+struct GPT_Regs {
+ unsigned int TIMERLOAD;
+ unsigned int TIMERVALUE;
+ unsigned int TIMERCONTROL;
+ unsigned int TIMERCLEAR;
+};
+
+#define GPT_BASE (IO_BASE_2 + 0x3000)
+#define l7200_timer1_regs ((volatile struct GPT_Regs *) (GPT_BASE))
+#define l7200_timer2_regs ((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
+
+/*
+ * General register values
+ */
+#define GPT_PRESCALE_1 0x00000000
+#define GPT_PRESCALE_16 0x00000004
+#define GPT_PRESCALE_256 0x00000008
+#define GPT_MODE_FREERUN 0x00000000
+#define GPT_MODE_PERIODIC 0x00000040
+#define GPT_ENABLE 0x00000080
+#define GPT_BZTOG 0x00000100
+#define GPT_BZMOD 0x00000200
+#define GPT_LOAD_MASK 0x0000ffff
+
+#endif
diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h
new file mode 100644
index 0000000..0b63e42
--- /dev/null
+++ b/include/asm-arm/arch-l7200/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ * linux/include/asm-arm/arch-l7200/gpio.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * GPIO.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF 0x00005000 /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE (IO_BASE_2 + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF 0x000
+#define PADDR_OFF 0x004
+#define PASBSR_OFF 0x008
+#define PAEENR_OFF 0x00c
+#define PAESNR_OFF 0x010
+#define PAESTR_OFF 0x014
+#define PAIMR_OFF 0x018
+#define PAINT_OFF 0x01c
+
+#define PBDR_OFF 0x020
+#define PBDDR_OFF 0x024
+#define PBSBSR_OFF 0x028
+#define PBIMR_OFF 0x038
+#define PBINT_OFF 0x03c
+
+#define PCDR_OFF 0x040
+#define PCDDR_OFF 0x044
+#define PCSBSR_OFF 0x048
+#define PCIMR_OFF 0x058
+#define PCINT_OFF 0x05c
+
+#define PDDR_OFF 0x060
+#define PDDDR_OFF 0x064
+#define PDSBSR_OFF 0x068
+#define PDEENR_OFF 0x06c
+#define PDESNR_OFF 0x070
+#define PDESTR_OFF 0x074
+#define PDIMR_OFF 0x078
+#define PDINT_OFF 0x07c
+
+#define PEDR_OFF 0x080
+#define PEDDR_OFF 0x084
+#define PESBSR_OFF 0x088
+#define PEEENR_OFF 0x08c
+#define PEESNR_OFF 0x090
+#define PEESTR_OFF 0x094
+#define PEIMR_OFF 0x098
+#define PEINT_OFF 0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN 0x02
+#define BACKLIGHT_EN 0x04
diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h
new file mode 100644
index 0000000..b755079
--- /dev/null
+++ b/include/asm-arm/arch-l7200/hardware.h
@@ -0,0 +1,60 @@
+/*
+ * linux/include/asm-arm/arch-l7200/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ * 02-01-2000 RS Created L7200 version, derived from rpc code
+ * 03-21-2000 SJH Cleaned up file
+ * 04-21-2000 RS Changed mapping of I/O in virtual space
+ * 04-25-2000 SJH Removed unused symbols and such
+ * 05-05-2000 SJH Complete rewrite
+ * 07-31-2000 SJH Added undocumented debug auxillary port to
+ * get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+#define RAM_START 0xf0000000
+#define RAM_SIZE 0x02000000
+#define RAM_BASE 0xc0000000
+
+#define IO_START 0x80000000 /* I/O */
+#define IO_SIZE 0x01000000
+#define IO_BASE 0xd0000000
+
+#define IO_START_2 0x90000000 /* I/O */
+#define IO_SIZE_2 0x01000000
+#define IO_BASE_2 0xd1000000
+
+#define AUX_START 0x1a000000 /* AUX PORT */
+#define AUX_SIZE 0x01000000
+#define AUX_BASE 0xd2000000
+
+#define FLASH1_START 0x00000000 /* FLASH BANK 1 */
+#define FLASH1_SIZE 0x01000000
+#define FLASH1_BASE 0xd3000000
+
+#define FLASH2_START 0x10000000 /* FLASH BANK 2 */
+#define FLASH2_SIZE 0x01000000
+#define FLASH2_BASE 0xd4000000
+
+#define ISA_START 0x20000000 /* ISA */
+#define ISA_SIZE 0x20000000
+#define ISA_BASE 0xe0000000
+
+#define FLUSH_BASE_PHYS 0x40000000 /* ROM */
+#define FLUSH_BASE 0xdf000000
+
+#define PCIO_BASE IO_BASE
+
+#endif
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
new file mode 100644
index 0000000..fc012a3
--- /dev/null
+++ b/include/asm-arm/arch-l7200/io.h
@@ -0,0 +1,76 @@
+/*
+ * linux/include/asm-arm/arch-l7200/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 03-21-2000 SJH Created from linux/include/asm-arm/arch-nexuspci/io.h
+ * 08-31-2000 SJH Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <asm/arch/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+#define __io_pci(a) ((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+#define __ioaddr(p) __io_pci(p)
+
+/*
+ * Generic virtual read/write
+ */
+#define __arch_getb(a) (*(volatile unsigned char *)(a))
+#define __arch_getl(a) (*(volatile unsigned int *)(a))
+
+static inline unsigned int __arch_getw(unsigned long a)
+{
+ unsigned int value;
+ __asm__ __volatile__("ldr%?h %0, [%1, #0] @ getw"
+ : "=&r" (value)
+ : "r" (a));
+ return value;
+}
+
+#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v))
+#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
+
+static inline void __arch_putw(unsigned int value, unsigned long a)
+{
+ __asm__ __volatile__("str%?h %0, [%1, #0] @ putw"
+ : : "r" (value), "r" (a));
+}
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p) (*(volatile unsigned char *)(p) = (v))
+#define inb_t(p) (*(volatile unsigned char *)(p))
+#define outw_t(v,p) (*(volatile unsigned int *)(p) = (v))
+#define inw_t(p) (*(volatile unsigned int *)(p))
+#define outl_t(v,p) (*(volatile unsigned long *)(p) = (v))
+#define inl_t(p) (*(volatile unsigned long *)(p))
+
+/*
+ * FIXME - These are to allow for linking. On all the other
+ * ARM platforms, the entire IO space is contiguous.
+ * The 7200 has three separate IO spaces. The below
+ * macros will eventually become more involved. Use
+ * with caution and don't be surprised by kernel oopses!!!
+ */
+#define inb(p) inb_t(p)
+#define inw(p) inw_t(p)
+#define inl(p) inl_t(p)
+#define outb(v,p) outb_t(v,p)
+#define outw(v,p) outw_t(v,p)
+#define outl(v,p) outl_t(v,p)
+
+#endif
diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h
new file mode 100644
index 0000000..7120c01
--- /dev/null
+++ b/include/asm-arm/arch-l7200/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/arch-l7200/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 01-02-2000 RS Create l7200 version
+ * 03-28-2000 SJH Removed unused interrupt
+ * 07-28-2000 SJH Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ * interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS 32
+
+#define IRQ_STWDOG 0 /* Watchdog timer */
+#define IRQ_PROG 1 /* Programmable interrupt */
+#define IRQ_DEBUG_RX 2 /* Comm Rx debug */
+#define IRQ_DEBUG_TX 3 /* Comm Tx debug */
+#define IRQ_GCTC1 4 /* Timer 1 */
+#define IRQ_GCTC2 5 /* Timer 2 / Keyboard */
+#define IRQ_DMA 6 /* DMA controller */
+#define IRQ_CLCD 7 /* Color LCD controller */
+#define IRQ_SM_RX 8 /* Smart card */
+#define IRQ_SM_TX 9 /* Smart cart */
+#define IRQ_SM_RST 10 /* Smart card */
+#define IRQ_SIB 11 /* Serial Interface Bus */
+#define IRQ_MMC 12 /* MultiMediaCard */
+#define IRQ_SSP1 13 /* Synchronous Serial Port 1 */
+#define IRQ_SSP2 14 /* Synchronous Serial Port 1 */
+#define IRQ_SPI 15 /* SPI slave */
+#define IRQ_UART_1 16 /* UART 1 */
+#define IRQ_UART_2 17 /* UART 2 */
+#define IRQ_IRDA 18 /* IRDA */
+#define IRQ_RTC_TICK 19 /* Real Time Clock tick */
+#define IRQ_RTC_ALARM 20 /* Real Time Clock alarm */
+#define IRQ_GPIO 21 /* General Purpose IO */
+#define IRQ_GPIO_DMA 22 /* General Purpose IO, DMA */
+#define IRQ_M2M 23 /* Memory to memory DMA */
+#define IRQ_RESERVED 24 /* RESERVED, don't use */
+#define IRQ_INTF 25 /* External active low interrupt */
+#define IRQ_INT0 26 /* External active low interrupt */
+#define IRQ_INT1 27 /* External active low interrupt */
+#define IRQ_INT2 28 /* External active low interrupt */
+#define IRQ_UCB1200 29 /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO 30 /* Low batery or external power */
+#define IRQ_MEDIA_CHG 31 /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START 64
diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h
new file mode 100644
index 0000000..c5b9608
--- /dev/null
+++ b/include/asm-arm/arch-l7200/memory.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-arm/arch-l7200/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ * 03-13-2000 SJH Created
+ * 04-13-2000 RS Changed bus macros for new addr
+ * 05-03-2000 SJH Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET (0xf0000000UL)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-l7200/param.h b/include/asm-arm/arch-l7200/param.h
new file mode 100644
index 0000000..9962a12
--- /dev/null
+++ b/include/asm-arm/arch-l7200/param.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm-arm/arch-l7200/param.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ * 04-21-2000 RS Created L7200 version
+ * 04-25-2000 SJH Cleaned up file
+ * 05-03-2000 SJH Change comments and rate
+ */
+
+/*
+ * See 'time.h' for how the RTC HZ rate is set
+ */
+#define HZ 128
diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h
new file mode 100644
index 0000000..730056c
--- /dev/null
+++ b/include/asm-arm/arch-l7200/pmpcon.h
@@ -0,0 +1,46 @@
+/****************************************************************************/
+/*
+ * linux/include/asm-arm/arch-l7200/pmpcon.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * DC/DC converter register.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define PMPCON_OFF 0x00006000 /* Offset from IO_START_2. */
+
+/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
+
+#define PMPCON_START (IO_START_2 + PMPCON_OFF) /* Physical address of reg. */
+#define PMPCON_BASE (IO_BASE_2 + PMPCON_OFF) /* Virtual address of reg. */
+
+
+#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
+
+#define PWM2_50CYCLE 0x800
+#define CONTRAST 0x9
+
+#define PWM1H (CONTRAST)
+#define PWM1L (CONTRAST << 4)
+
+#define PMPCON_VALUE (PWM2_50CYCLE | PWM1L | PWM1H)
+
+/* PMPCON = 0x811; // too light and fuzzy
+ * PMPCON = 0x844;
+ * PMPCON = 0x866; // better color poor depth
+ * PMPCON = 0x888; // Darker but better depth
+ * PMPCON = 0x899; // Darker even better depth
+ * PMPCON = 0x8aa; // too dark even better depth
+ * PMPCON = 0X8cc; // Way too dark
+ */
+
+/* As CONTRAST value increases the greater the depth perception and
+ * the darker the colors.
+ */
diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h
new file mode 100644
index 0000000..57faea7
--- /dev/null
+++ b/include/asm-arm/arch-l7200/pmu.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+/*
+ * linux/include/asm-arm/arch-l7200/pmu.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * Power Management Unit (PMU).
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */
+#define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */
+
+
+/* Define the PMU registers for use by device drivers and the kernel. */
+
+typedef struct {
+ unsigned int CURRENT; /* Current configuration register */
+ unsigned int NEXT; /* Next configuration register */
+ unsigned int reserved;
+ unsigned int RUN; /* Run configuration register */
+ unsigned int COMM; /* Configuration command register */
+ unsigned int SDRAM; /* SDRAM configuration bypass register */
+} pmu_interface;
+
+#define PMU ((volatile pmu_interface *)(PMU_BASE))
+
+
+/* Macro's for reading the common register fields. */
+
+#define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */
+#define GET_OSCEN(reg) ((reg >> 16) & 0x01)
+#define GET_OSCMUX(reg) ((reg >> 15) & 0x01)
+#define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */
+#define GET_PLLEN(reg) ((reg >> 8) & 0x01)
+#define GET_PLLMUX(reg) ((reg >> 7) & 0x01)
+#define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */
+#define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01)
+#define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01)
+#define GET_FASTBUS(reg) (reg & 0x1)
+
+/* CFG_NEXT register */
+
+#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */
+#define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01)
+#define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01)
+#define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01)
+
+/* Useful field values that can be used to construct the
+ * CFG_NEXT and CFG_RUN registers.
+ */
+
+#define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */
+#define NOCHANGE_STALL 1<<25
+#define CHANGE_NOSTALL 2<<25
+#define CHANGE_STALL 3<<25
+
+#define INTRET 1<<17
+#define OSCEN 1<<16
+#define OSCMUX 1<<15
+
+/* PLL frequencies */
+
+#define PLLMUL_0 0<<9 /* 3.6864 MHz */
+#define PLLMUL_1 1<<9 /* ?????? MHz */
+#define PLLMUL_5 5<<9 /* 18.432 MHz */
+#define PLLMUL_10 10<<9 /* 36.864 MHz */
+#define PLLMUL_18 18<<9 /* ?????? MHz */
+#define PLLMUL_20 20<<9 /* 73.728 MHz */
+#define PLLMUL_32 32<<9 /* ?????? MHz */
+#define PLLMUL_35 35<<9 /* 129.024 MHz */
+#define PLLMUL_36 36<<9 /* ?????? MHz */
+#define PLLMUL_39 39<<9 /* ?????? MHz */
+#define PLLMUL_40 40<<9 /* 147.456 MHz */
+
+/* Clock recovery times */
+
+#define CRCLOCK_1 1<<18
+#define CRCLOCK_2 2<<18
+#define CRCLOCK_4 4<<18
+#define CRCLOCK_8 8<<18
+#define CRCLOCK_16 16<<18
+#define CRCLOCK_32 32<<18
+#define CRCLOCK_63 63<<18
+#define CRCLOCK_127 127<<18
+
+#define PLLEN 1<<8
+#define PLLMUX 1<<7
+#define SDR_STOP 1<<6
+#define SYSCLKEN 1<<5
+
+#define BCLK_DIV_4 2<<3
+#define BCLK_DIV_2 1<<3
+#define BCLK_DIV_1 0<<3
+
+#define SDRB_SEL 1<<2
+#define SDRF_SEL 1<<1
+#define FASTBUS 1<<0
+
+
+/* CFG_SDRAM */
+
+#define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */
+#define SDRREFACK 1<<1 /* Read-only */
+#define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */
+#define SDRSTOPACK 1<<3 /* Read-only */
+#define PICEN 1<<4 /* Enable Co-procesor */
+#define PICTEST 1<<5
+
+#define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01)
+#define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
+#define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01)
+#define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
+#define GET_PICEN ((PMU->SDRAM >> 4) & 0x01)
+#define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01)
diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h
new file mode 100644
index 0000000..defb8b7
--- /dev/null
+++ b/include/asm-arm/arch-l7200/serial.h
@@ -0,0 +1,37 @@
+/*
+ * linux/include/asm-arm/arch-l7200/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 03-20-2000 SJH Created
+ * 03-26-2000 SJH Added flags for serial ports
+ * 03-27-2000 SJH Corrected BASE_BAUD value
+ * 04-14-2000 RS Made register addr dependent on IO_BASE
+ * 05-03-2000 SJH Complete rewrite
+ * 05-09-2000 SJH Stripped out architecture specific serial stuff
+ * and placed it in a separate file
+ * 07-28-2000 SJH Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS \
+ /* MAGIC UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS }, /* ttyLU0 */ \
+ { 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS }, /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
new file mode 100644
index 0000000..238c595
--- /dev/null
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -0,0 +1,101 @@
+/*
+ * linux/include/asm-arm/arch-l7200/serial_l7200.h
+ *
+ * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 05-09-2000 SJH Created
+ */
+#ifndef __ASM_ARCH_SERIAL_L7200_H
+#define __ASM_ARCH_SERIAL_L7200_H
+
+#include <asm/arch/memory.h>
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * UART base register addresses
+ */
+#define UART1_BASE (IO_BASE + 0x00044000)
+#define UART2_BASE (IO_BASE + 0x00045000)
+
+/*
+ * UART register offsets
+ */
+#define UARTDR 0x00 /* Tx/Rx data */
+#define RXSTAT 0x04 /* Rx status */
+#define H_UBRLCR 0x08 /* mode register high */
+#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/
+#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
+#define UARTCON 0x14 /* control register */
+#define UARTFLG 0x18 /* flag register */
+#define UARTINTSTAT 0x1C /* FIFO IRQ status register */
+#define UARTINTMASK 0x20 /* FIFO IRQ mask register */
+
+/*
+ * UART baud rate register values
+ */
+#define BR_110 0x827
+#define BR_1200 0x06e
+#define BR_2400 0x05f
+#define BR_4800 0x02f
+#define BR_9600 0x017
+#define BR_14400 0x00f
+#define BR_19200 0x00b
+#define BR_38400 0x005
+#define BR_57600 0x003
+#define BR_76800 0x002
+#define BR_115200 0x001
+
+/*
+ * Receiver status register (RXSTAT) mask values
+ */
+#define RXSTAT_NO_ERR 0x00 /* No error */
+#define RXSTAT_FRM_ERR 0x01 /* Framing error */
+#define RXSTAT_PAR_ERR 0x02 /* Parity error */
+#define RXSTAT_OVR_ERR 0x04 /* Overrun error */
+
+/*
+ * High byte of UART bit rate and line control register (H_UBRLCR) values
+ */
+#define UBRLCR_BRK 0x01 /* generate break on tx */
+#define UBRLCR_PEN 0x02 /* enable parity */
+#define UBRLCR_PDIS 0x00 /* disable parity */
+#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */
+#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */
+#define UBRLCR_FIFO 0x10 /* enable FIFO */
+#define UBRLCR_LEN5 0x60 /* word length5 */
+#define UBRLCR_LEN6 0x40 /* word length6 */
+#define UBRLCR_LEN7 0x20 /* word length7 */
+#define UBRLCR_LEN8 0x00 /* word length8 */
+
+/*
+ * UART control register (UARTCON) values
+ */
+#define UARTCON_UARTEN 0x01 /* Enable UART */
+#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */
+
+/*
+ * UART flag register (UARTFLG) mask values
+ */
+#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */
+#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */
+#define UARTFLG_UBUSY 0x08 /* Transmitter busy */
+#define UARTFLG_DCD 0x04 /* Data carrier detect */
+#define UARTFLG_DSR 0x02 /* Data set ready */
+#define UARTFLG_CTS 0x01 /* Clear to send */
+
+/*
+ * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
+ */
+#define UART_TXINT 0x01 /* TX interrupt */
+#define UART_RXINT 0x02 /* RX interrupt */
+#define UART_RXERRINT 0x04 /* RX error interrupt */
+#define UART_MSINT 0x08 /* Modem Status interrupt */
+#define UART_UDINT 0x10 /* UART Disabled interrupt */
+#define UART_ALLIRQS 0x1f /* All interrupts */
+
+#endif
diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h
new file mode 100644
index 0000000..bf4364e
--- /dev/null
+++ b/include/asm-arm/arch-l7200/sib.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+/*
+ * linux/include/asm-arm/arch-l7200/sib.h
+ *
+ * Registers and helper functions for the Serial Interface Bus.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
+#define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */
+
+/* Offsets from the start of the SIB for all the registers. */
+
+/* Define the SIB registers for use by device drivers and the kernel. */
+
+typedef struct
+{
+ unsigned int MCCR; /* SIB Control Register Offset: 0x00 */
+ unsigned int RES1; /* Reserved Offset: 0x04 */
+ unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */
+ unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */
+ unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */
+ unsigned int RES2; /* Reserved Offset: 0x14 */
+ unsigned int MCSR; /* SIB Status Register Offset: 0x18 */
+} SIB_Interface;
+
+#define SIB ((volatile SIB_Interface *) (SIB_BASE))
+
+/* MCCR */
+
+#define INTERNAL_FREQ 9216000 /* Hertz */
+#define AUDIO_FREQ 5000 /* Hertz */
+#define TELECOM_FREQ 5000 /* Hertz */
+
+#define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ))
+#define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ))
+
+#define MCCR_ASD57 AUDIO_DIVIDE
+#define MCCR_TSD57 (TELECOM_DIVIDE << 8)
+#define MCCR_MCE (1 << 16) /* SIB enable */
+#define MCCR_ECS (1 << 17) /* External Clock Select */
+#define MCCR_ADM (1 << 18) /* A/D Data Sampling */
+#define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */
+
+
+#define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */
+#define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */
+#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
+#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
+#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
+#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */
+#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
+#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */
+#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
+#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
+#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
+#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
+#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
+#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
+
+/* MCDR0 */
+
+#define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff)
+#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
+
+/* MCDR1 */
+
+#define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff)
+#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
+
+
+/* MCSR */
+
+#define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */
+#define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */
+#define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */
+#define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */
+
+#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
+
+
+#define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/
+#define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/
+#define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */
+#define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */
+#define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */
+#define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */
+#define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */
+#define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */
+#define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */
+#define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */
+#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
+#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
+#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
+#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
+#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
+#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
+
+/* MCDR2 */
+
+#define MCDR2_rW (1 << 16)
+
+#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
+#define MCDR2_WRITE_COMPLETE GET_CWC
+
+#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
+#define MCDR2_READ_COMPLETE GET_CRC
+#define MCDR2_READ (SIB->MCDR2 & 0xffff)
diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h
new file mode 100644
index 0000000..771c774
--- /dev/null
+++ b/include/asm-arm/arch-l7200/sys-clock.h
@@ -0,0 +1,67 @@
+/****************************************************************************/
+/*
+ * linux/include/asm-arm/arch-l7200/sys-clock.h
+ *
+ * Registers and helper functions for the L7200 Link-Up Systems
+ * System clocks.
+ *
+ * (C) Copyright 2000, S A McConnell (samcconn@cotw.com)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/****************************************************************************/
+
+#define SYS_CLOCK_OFF 0x00050030 /* Offset from IO_START. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
+#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
+
+/* Define the interface to the SYS_CLOCK */
+
+typedef struct
+{
+ unsigned int ENABLE;
+ unsigned int ESYNC;
+ unsigned int SELECT;
+} sys_clock_interface;
+
+#define SYS_CLOCK ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
+
+//#define CLOCK_EN (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
+//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
+//#define CLOCK_SEL (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
+
+/* SYS_CLOCK -> ENABLE */
+
+#define SYN_EN 1<<0
+#define B18M_EN 1<<1
+#define CLK3M6_EN 1<<2
+#define BUART_EN 1<<3
+#define CLK18MU_EN 1<<4
+#define FIR_EN 1<<5
+#define MIRN_EN 1<<6
+#define UARTM_EN 1<<7
+#define SIBADC_EN 1<<8
+#define ALTD_EN 1<<9
+#define CLCLK_EN 1<<10
+
+/* SYS_CLOCK -> SELECT */
+
+#define CLK18M_DIV 1<<0
+#define MIR_SEL 1<<1
+#define SSP_SEL 1<<4
+#define MM_DIV 1<<5
+#define MM_SEL 1<<6
+#define ADC_SEL_2 0<<7
+#define ADC_SEL_4 1<<7
+#define ADC_SEL_8 3<<7
+#define ADC_SEL_16 7<<7
+#define ADC_SEL_32 0x0f<<7
+#define ADC_SEL_64 0x1f<<7
+#define ADC_SEL_128 0x3f<<7
+#define ALTD_SEL 1<<13
diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h
new file mode 100644
index 0000000..cb4ff29
--- /dev/null
+++ b/include/asm-arm/arch-l7200/system.h
@@ -0,0 +1,27 @@
+/*
+ * linux/include/asm-arm/arch-l7200/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ * 03-21-2000 SJH Created
+ * 04-26-2000 SJH Fixed functions
+ * 05-03-2000 SJH Removed usage of obsolete 'iomd.h'
+ * 05-31-2000 SJH Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+ if (mode == 's') {
+ cpu_reset(0);
+ }
+}
+
+#endif
diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h
new file mode 100644
index 0000000..7b98b53
--- /dev/null
+++ b/include/asm-arm/arch-l7200/time.h
@@ -0,0 +1,72 @@
+/*
+ * linux/include/asm-arm/arch-l7200/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 01-02-2000 RS Created l7200 version, derived from rpc code
+ * 05-03-2000 SJH Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <asm/arch/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE (IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32 0x00 /* 32 Hz tick */
+#define RTC_RATE_64 0x10 /* 64 Hz tick */
+#define RTC_RATE_128 0x20 /* 128 Hz tick */
+#define RTC_RATE_256 0x30 /* 256 Hz tick */
+#define RTC_EN_ALARM 0x01 /* Enable alarm */
+#define RTC_EN_TIC 0x04 /* Enable counter */
+#define RTC_EN_STWDOG 0x08 /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ do_timer(regs);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ do_profile(regs);
+ RTC_RTCC = 0; /* Clear interrupt */
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+ RTC_RTCC = 0; /* Clear interrupt */
+
+ timer_irq.handler = timer_interrupt;
+
+ setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+ RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */
+}
+
+#endif
diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h
new file mode 100644
index 0000000..3c32026
--- /dev/null
+++ b/include/asm-arm/arch-l7200/timex.h
@@ -0,0 +1,20 @@
+/*
+ * linux/include/asm-arm/arch-l7200/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ * Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000 RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ * must be changed when choosing a different tick
+ * rate. The value of HZ in 'param.h' must also
+ * be changed to match below.
+ */
+#define CLOCK_TICK_RATE 128
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
new file mode 100644
index 0000000..1caa2b5
--- /dev/null
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -0,0 +1,44 @@
+/*
+ * linux/include/asm-arm/arch-l7200/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 05-01-2000 SJH Created
+ * 05-13-2000 SJH Filled in function bodies
+ * 07-26-2000 SJH Removed hard coded buad rate
+ */
+
+#include <asm/hardware.h>
+
+#define IO_UART IO_START + 0x00044000
+
+#define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p) (*(volatile unsigned char *)(p))
+
+static __inline__ void putc(char c)
+{
+ while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+ __raw_readb(IO_UART + 0x18) & 0x08);
+ __raw_writeb(c, IO_UART + 0x00);
+}
+
+static void putstr(const char *s)
+{
+ while (*s) {
+ if (*s == 10) { /* If a LF, add CR */
+ putc(10);
+ putc(13);
+ }
+ putc(*(s++));
+ }
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+ __raw_writeb(0x00, IO_UART + 0x08); /* Set HSB */
+ __raw_writeb(0x00, IO_UART + 0x20); /* Disable IRQs */
+ __raw_writeb(0x01, IO_UART + 0x14); /* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h
new file mode 100644
index 0000000..edeaebe
--- /dev/null
+++ b/include/asm-arm/arch-l7200/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-arm/arch-l7200/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET (8*1024*1024)
+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)