Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h
new file mode 100644
index 0000000..e28ca51
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-cpld.h
@@ -0,0 +1,58 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 25-May-2003 BJD Created file, added CTRL1 registers
+ * 30-Aug-2004 BJD Updated definitions from 2.4.26 port
+ * 30-Aug-2004 BJD Added CTRL3 and CTRL4 definitions
+*/
+
+#ifndef __ASM_ARCH_BASTCPLD_H
+#define __ASM_ARCH_BASTCPLD_H
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF (0x00)
+#define BAST_CPLD_CTRL1_LRCADC (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC (0x02)
+#define BAST_CPLD_CTRL1_LRCARM (0x03)
+#define BAST_CPLD_CTRL1_LRMASK (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND (0x04)
+#define BAST_CPLD_CTLR2_IDERST (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT (0x01)
+#define BAST_CPLD_CTRL4_LCDRW (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD (0x04)
+#define BAST_CPLD_CTRL4_LCDE2 (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE (0<<0)
+#define BAST_CPLD_DMA0_SECIDE (1<<0)
+#define BAST_CPLD_DMA0_ISA15 (2<<0)
+#define BAST_CPLD_DMA0_ISA36 (3<<0)
+
+#define BAST_CPLD_DMA1_PRIIDE (0<<2)
+#define BAST_CPLD_DMA1_SECIDE (1<<2)
+#define BAST_CPLD_DMA1_ISA15 (2<<2)
+#define BAST_CPLD_DMA1_ISA36 (3<<2)
+
+#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h
new file mode 100644
index 0000000..b79b47f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-irq.h
@@ -0,0 +1,33 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-irq.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 14-Sep-2004 BJD Fixed IRQ_USBOC definition
+ * 06-Jan-2003 BJD Linux 2.6.0 version
+ */
+
+#ifndef __ASM_ARCH_BASTIRQ_H
+#define __ASM_ARCH_BASTIRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC IRQ_EINT18
+#define IRQ_IDE0 IRQ_EINT16
+#define IRQ_IDE1 IRQ_EINT17
+#define IRQ_PCSERIAL1 IRQ_EINT15
+#define IRQ_PCSERIAL2 IRQ_EINT14
+#define IRQ_PCPARALLEL IRQ_EINT13
+#define IRQ_ASIX IRQ_EINT11
+#define IRQ_DM9000 IRQ_EINT10
+#define IRQ_ISA IRQ_EINT9
+#define IRQ_SMALERT IRQ_EINT8
+
+#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h
new file mode 100644
index 0000000..29c07e3
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-map.h
@@ -0,0 +1,150 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-map.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics from arch/map.h
+ * 12-Mar-2004 BJD Fixed header include protection
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_BASTMAP_H
+#define __ASM_ARCH_BASTMAP_H
+
+#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */
+#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */
+#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */
+#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */
+#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1 (0x8800000)
+#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1 (0x8000000)
+#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1 (0x9800000)
+#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1 (0x9000000)
+#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2 (0xA800000)
+#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2 (0xA000000)
+#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2 (0xB800000)
+#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2 (0xB000000)
+#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000)
+
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO (0x00000000)
+#define BAST_PA_ASIXNET (0x01000000)
+#define BAST_PA_SUPERIO (0x01800000)
+#define BAST_PA_IDEPRI (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM (0x04000000)
+#define BAST_PA_DM9000 (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+/* */
+
+#define BAST_ASIXNET_CS BAST_VAM_CS5
+#define BAST_IDE_CS BAST_VAM_CS5
+#define BAST_DM9000_CS BAST_VAM_CS4
+
+#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h
new file mode 100644
index 0000000..758c5c5
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/bast-pmu.h
@@ -0,0 +1,43 @@
+/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * Machine BAST - Power Management chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 08-Oct-2003 BJD Initial creation
+*/
+
+#ifndef __ASM_ARCH_BASTPMU_H
+#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
+
+#define BASTPMU_REG_IDENT (0x00)
+#define BASTPMU_REG_VERSION (0x01)
+#define BASTPMU_REG_DDCCTRL (0x02)
+#define BASTPMU_REG_POWER (0x03)
+#define BASTPMU_REG_RESET (0x04)
+#define BASTPMU_REG_GWO (0x05)
+#define BASTPMU_REG_WOL (0x06)
+#define BASTPMU_REG_WOR (0x07)
+#define BASTPMU_REG_UID (0x09)
+
+#define BASTPMU_EEPROM (0xC0)
+
+#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0)
+#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8)
+#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9)
+
+#define BASTPMU_IDENT_0 0x53
+#define BASTPMU_IDENT_1 0x42
+#define BASTPMU_IDENT_2 0x50
+#define BASTPMU_IDENT_3 0x4d
+
+#define BASTPMU_RESET_GUARD (0x55)
+
+#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
new file mode 100644
index 0000000..abfbe45
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/debug-macro.S
@@ -0,0 +1,99 @@
+/* linux/include/asm-arm/arch-s3c2410/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Copyright (C) 2005 Simtec Electronics
+ *
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+*/
+
+#include <asm/arch/map.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C2410_PA_UART
+ ldrne \rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C2410_UART != 0
+ add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
+#endif
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, # S3C2410_UTXH ]
+ .endm
+
+ .macro busyuart, rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFCON ]
+ tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
+ beq 1001f @
+ @ FIFO enabled...
+1003:
+ mrc p15, 0, \rd, c1, c0
+ tst \rd, #1
+ addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+ bic \rd, \rd, #0xff000
+ ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ and \rd, \rd, #0x00ff0000
+ teq \rd, #0x00440000 @ is it 2440?
+
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ moveq \rd, \rd, lsr #SHIFT_2440TXF
+ tst \rd, #S3C2410_UFSTAT_TXFULL
+ bne 1003b
+ b 1002f
+
+1001:
+ @ busy waiting for non fifo
+ ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ tst \rd, #S3C2410_UTRSTAT_TXFE
+ beq 1001b
+
+1002: @ exit busyuart
+ .endm
+
+ .macro waituart,rd,rx
+
+ ldr \rd, [ \rx, # S3C2410_UFCON ]
+ tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
+ beq 1001f @
+ @ FIFO enabled...
+1003:
+ mrc p15, 0, \rd, c1, c0
+ tst \rd, #1
+ addeq \rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+ addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+ bic \rd, \rd, #0xff000
+ ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ and \rd, \rd, #0x00ff0000
+ teq \rd, #0x00440000 @ is it 2440?
+
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
+ andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
+ teq \rd, #0
+ bne 1003b
+ b 1002f
+
+1001:
+ @ idle waiting for non fifo
+ ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ tst \rd, #S3C2410_UTRSTAT_TXFE
+ beq 1001b
+
+1002: @ exit busyuart
+ .endm
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
new file mode 100644
index 0000000..e830a40
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -0,0 +1,376 @@
+/* linux/include/asm-arm/arch-bast/dma.h
+ *
+ * Copyright (C) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2410X DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * ??-May-2003 BJD Created file
+ * ??-Jun-2003 BJD Added more dma functionality to go with arch
+ * 10-Nov-2004 BJD Added sys_device support
+*/
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/config.h>
+#include <linux/sysdev.h>
+#include "hardware.h"
+
+
+/*
+ * This is the maximum DMA address(physical address) that can be DMAd to.
+ *
+ */
+#define MAX_DMA_ADDRESS 0x20000000
+#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
+
+
+/* according to the samsung port, we cannot use the regular
+ * dma channels... we must therefore provide our own interface
+ * for DMA, and allow our drivers to use that.
+ */
+
+#define MAX_DMA_CHANNELS 0
+
+
+/* we have 4 dma channels */
+#define S3C2410_DMA_CHANNELS (4)
+
+/* types */
+
+typedef enum {
+ S3C2410_DMA_IDLE,
+ S3C2410_DMA_RUNNING,
+ S3C2410_DMA_PAUSED
+} s3c2410_dma_state_t;
+
+
+/* s3c2410_dma_loadst_t
+ *
+ * This represents the state of the DMA engine, wrt to the loaded / running
+ * transfers. Since we don't have any way of knowing exactly the state of
+ * the DMA transfers, we need to know the state to make decisions on wether
+ * we can
+ *
+ * S3C2410_DMA_NONE
+ *
+ * There are no buffers loaded (the channel should be inactive)
+ *
+ * S3C2410_DMA_1LOADED
+ *
+ * There is one buffer loaded, however it has not been confirmed to be
+ * loaded by the DMA engine. This may be because the channel is not
+ * yet running, or the DMA driver decided that it was too costly to
+ * sit and wait for it to happen.
+ *
+ * S3C2410_DMA_1RUNNING
+ *
+ * The buffer has been confirmed running, and not finisged
+ *
+ * S3C2410_DMA_1LOADED_1RUNNING
+ *
+ * There is a buffer waiting to be loaded by the DMA engine, and one
+ * currently running.
+*/
+
+typedef enum {
+ S3C2410_DMALOAD_NONE,
+ S3C2410_DMALOAD_1LOADED,
+ S3C2410_DMALOAD_1RUNNING,
+ S3C2410_DMALOAD_1LOADED_1RUNNING,
+} s3c2410_dma_loadst_t;
+
+typedef enum {
+ S3C2410_RES_OK,
+ S3C2410_RES_ERR,
+ S3C2410_RES_ABORT
+} s3c2410_dma_buffresult_t;
+
+
+typedef enum s3c2410_dmasrc_e s3c2410_dmasrc_t;
+
+enum s3c2410_dmasrc_e {
+ S3C2410_DMASRC_HW, /* source is memory */
+ S3C2410_DMASRC_MEM /* source is hardware */
+};
+
+/* enum s3c2410_chan_op_e
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op_e {
+ S3C2410_DMAOP_START,
+ S3C2410_DMAOP_STOP,
+ S3C2410_DMAOP_PAUSE,
+ S3C2410_DMAOP_RESUME,
+ S3C2410_DMAOP_FLUSH,
+ S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
+};
+
+typedef enum s3c2410_chan_op_e s3c2410_chan_op_t;
+
+/* flags */
+
+#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about
+ * waiting for reloads */
+#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */
+
+/* dma buffer */
+
+typedef struct s3c2410_dma_buf_s s3c2410_dma_buf_t;
+
+struct s3c2410_dma_client {
+ char *name;
+};
+
+typedef struct s3c2410_dma_client s3c2410_dma_client_t;
+
+/* s3c2410_dma_buf_s
+ *
+ * internally used buffer structure to describe a queued or running
+ * buffer.
+*/
+
+struct s3c2410_dma_buf_s {
+ s3c2410_dma_buf_t *next;
+ int magic; /* magic */
+ int size; /* buffer size in bytes */
+ dma_addr_t data; /* start of DMA data */
+ dma_addr_t ptr; /* where the DMA got to [1] */
+ void *id; /* client's id */
+};
+
+/* [1] is this updated for both recv/send modes? */
+
+typedef struct s3c2410_dma_chan_s s3c2410_dma_chan_t;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(s3c2410_dma_chan_t *, void *buf, int size,
+ s3c2410_dma_buffresult_t result);
+
+typedef int (*s3c2410_dma_opfn_t)(s3c2410_dma_chan_t *,
+ s3c2410_chan_op_t );
+
+struct s3c2410_dma_stats_s {
+ unsigned long loads;
+ unsigned long timeout_longest;
+ unsigned long timeout_shortest;
+ unsigned long timeout_avg;
+ unsigned long timeout_failed;
+};
+
+typedef struct s3c2410_dma_stats_s s3c2410_dma_stats_t;
+
+/* struct s3c2410_dma_chan_s
+ *
+ * full state information for each DMA channel
+*/
+
+struct s3c2410_dma_chan_s {
+ /* channel state flags and information */
+ unsigned char number; /* number of this dma channel */
+ unsigned char in_use; /* channel allocated */
+ unsigned char irq_claimed; /* irq claimed for channel */
+ unsigned char irq_enabled; /* irq enabled for channel */
+ unsigned char xfer_unit; /* size of an transfer */
+
+ /* channel state */
+
+ s3c2410_dma_state_t state;
+ s3c2410_dma_loadst_t load_state;
+ s3c2410_dma_client_t *client;
+
+ /* channel configuration */
+ s3c2410_dmasrc_t source;
+ unsigned long dev_addr;
+ unsigned long load_timeout;
+ unsigned int flags; /* channel flags */
+
+ /* channel's hardware position and configuration */
+ void __iomem *regs; /* channels registers */
+ void __iomem *addr_reg; /* data address register */
+ unsigned int irq; /* channel irq */
+ unsigned long dcon; /* default value of DCON */
+
+ /* driver handles */
+ s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
+ s3c2410_dma_opfn_t op_fn; /* channel operation callback */
+
+ /* stats gathering */
+ s3c2410_dma_stats_t *stats;
+ s3c2410_dma_stats_t stats_store;
+
+ /* buffer list and information */
+ s3c2410_dma_buf_t *curr; /* current dma buffer */
+ s3c2410_dma_buf_t *next; /* next buffer to load */
+ s3c2410_dma_buf_t *end; /* end of queue */
+
+ /* system device */
+ struct sys_device dev;
+};
+
+/* the currently allocated channel information */
+extern s3c2410_dma_chan_t s3c2410_chans[];
+
+/* note, we don't really use dma_device_t at the moment */
+typedef unsigned long dma_device_t;
+
+/* functions --------------------------------------------------------------- */
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(dmach_t channel,
+ s3c2410_dma_client_t *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(dmach_t channel,
+ unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+ dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, s3c2410_dmasrc_t source,
+ int hwcfg, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(dmach_t channel,
+ dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC (0x00)
+#define S3C2410_DMA_DISRCC (0x04)
+#define S3C2410_DMA_DIDST (0x08)
+#define S3C2410_DMA_DIDSTC (0x0C)
+#define S3C2410_DMA_DCON (0x10)
+#define S3C2410_DMA_DSTAT (0x14)
+#define S3C2410_DMA_DCSRC (0x18)
+#define S3C2410_DMA_DCDST (0x1C)
+#define S3C2410_DMA_DMASKTRIG (0x20)
+
+#define S3C2410_DISRCC_INC (1<<0)
+#define S3C2410_DISRCC_APB (1<<1)
+
+#define S3C2410_DMASKTRIG_STOP (1<<2)
+#define S3C2410_DMASKTRIG_ON (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND (0<<31)
+#define S3C2410_DCON_HANDSHAKE (1<<31)
+#define S3C2410_DCON_SYNC_PCLK (0<<30)
+#define S3C2410_DCON_SYNC_HCLK (1<<30)
+
+#define S3C2410_DCON_INTREQ (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
+#define S3C2410_DCON_CH0_UART0 (1<<24)
+#define S3C2410_DCON_CH0_SDI (2<<24)
+#define S3C2410_DCON_CH0_TIMER (3<<24)
+#define S3C2410_DCON_CH0_USBEP1 (4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
+#define S3C2410_DCON_CH1_UART1 (1<<24)
+#define S3C2410_DCON_CH1_I2SSDI (2<<24)
+#define S3C2410_DCON_CH1_SPI (3<<24)
+#define S3C2410_DCON_CH1_USBEP2 (4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO (0<<24)
+#define S3C2410_DCON_CH2_I2SSDI (1<<24)
+#define S3C2410_DCON_CH2_SDI (2<<24)
+#define S3C2410_DCON_CH2_TIMER (3<<24)
+#define S3C2410_DCON_CH2_USBEP3 (4<<24)
+
+#define S3C2410_DCON_CH3_UART2 (0<<24)
+#define S3C2410_DCON_CH3_SDI (1<<24)
+#define S3C2410_DCON_CH3_SPI (2<<24)
+#define S3C2410_DCON_CH3_TIMER (3<<24)
+#define S3C2410_DCON_CH3_USBEP4 (4<<24)
+
+#define S3C2410_DCON_SRCSHIFT (24)
+#define S3C2410_DCON_SRCMASK (7<<24)
+
+#define S3C2410_DCON_BYTE (0<<20)
+#define S3C2410_DCON_HALFWORD (1<<20)
+#define S3C2410_DCON_WORD (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD (1<<22)
+#define S3C2410_DCON_HWTRIG (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT (1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO (5<<24)
+#define S3C2440_DCON_CH0_PCMIN (6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT (5<<24)
+#define S3C2440_DCON_CH1_SDI (6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN (5<<24)
+#define S3C2440_DCON_CH2_MICIN (6<<24)
+
+#define S3C2440_DCON_CH3_MICIN (5<<24)
+#define S3C2440_DCON_CH3_PCMOUT (6<<24)
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S
new file mode 100644
index 0000000..b7d4d7f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/entry-macro.S
@@ -0,0 +1,119 @@
+/*
+ * include/asm-arm/arch-s3c2410/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S3C2410-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+
+ * Modifications:
+ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+ */
+
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \tmp, #S3C24XX_VA_IRQ
+ ldr \irqnr, [ \tmp, #0x14 ] @ get irq no
+30000:
+ teq \irqnr, #4
+ teqne \irqnr, #5
+ beq 1002f @ external irq reg
+
+ @ debug check to see if interrupt reported is the same
+ @ as the offset....
+
+ teq \irqnr, #0
+ beq 20002f
+ ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
+ mov \irqstat, \irqstat, lsr \irqnr
+ tst \irqstat, #1
+ bne 20002f
+
+ /* debug/warning if we get an invalud response from the
+ * INTOFFSET register */
+#if 1
+ stmfd r13!, { r0 - r4 , r8-r12, r14 }
+ ldr r1, [ \tmp, #0x14 ] @ INTOFFSET
+ ldr r2, [ \tmp, #0x10 ] @ INTPND
+ ldr r3, [ \tmp, #0x00 ] @ SRCPND
+ adr r0, 20003f
+ bl printk
+ b 20004f
+
+20003:
+ .ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n"
+ .byte 0
+ .align 4
+20004:
+ mov r1, #1
+ mov \tmp, #S3C24XX_VA_IRQ
+ ldmfd r13!, { r0 - r4 , r8-r12, r14 }
+#endif
+
+ @ try working out interrupt number for ourselves
+ mov \irqnr, #0
+ ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
+10021:
+ movs \irqstat, \irqstat, lsr#1
+ bcs 30000b @ try and re-start the proccess
+ add \irqnr, \irqnr, #1
+ cmp \irqnr, #32
+ ble 10021b
+
+ @ found no interrupt, set Z flag and leave
+ movs \irqnr, #0
+ b 1001f
+
+20005:
+20002: @ exit
+ @ we base the s3c2410x interrupts at 16 and above to allow
+ @ isa peripherals to have their standard interrupts, also
+ @ ensure that Z flag is un-set on exit
+
+ @ note, we cannot be sure if we get IRQ_EINT0 (0) that
+ @ there is simply no interrupt pending, so in all other
+ @ cases we jump to say we have found something, otherwise
+ @ we check to see if the interrupt really is assrted
+ adds \irqnr, \irqnr, #IRQ_EINT0
+ teq \irqnr, #IRQ_EINT0
+ bne 1001f @ exit
+ ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
+ teq \irqstat, #0
+ moveq \irqnr, #0
+ b 1001f
+
+ @ we get here from no main or external interrupts pending
+1002:
+ add \tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ
+ ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND
+ ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK
+
+ bic \irqstat, \irqstat, \irqnr @ clear masked irqs
+
+ mov \irqnr, #IRQ_EINT4 @ start extint nos
+ mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits
+10021:
+ movs \irqstat, \irqstat, lsr#1
+ bcs 1004f
+ add \irqnr, \irqnr, #1
+ cmp \irqnr, #IRQ_EINT23
+ ble 10021b
+
+ @ found no interrupt, set Z flag and leave
+ movs \irqnr, #0
+
+1004: @ ensure Z flag clear in case our MOVS shifted out the last bit
+ teq \irqnr, #0
+1001:
+ @ exit irq routine
+ .endm
+
+
+ /* currently don't need an disable_fiq macro */
+
+ .macro disable_fiq
+ .endm
+
+
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
new file mode 100644
index 0000000..48a3991
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/hardware.h
@@ -0,0 +1,105 @@
+/* linux/include/asm-arm/arch-s3c2410/hardware.h
+ *
+ * (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 21-May-2003 BJD Created file
+ * 06-Jun-2003 BJD Added CPU frequency settings
+ * 03-Sep-2003 BJD Linux v2.6 support
+ * 12-Mar-2004 BJD Fixed include protection, fixed type of clock vars
+ * 14-Sep-2004 BJD Added misccr and getpin to gpio
+ * 01-Oct-2004 BJD Added the new gpio functions
+ * 16-Oct-2004 BJD Removed the clock variables
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ * < 0 = no interrupt for this pin
+ * >=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ * 1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ * width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ * 0 => enable the pull-up
+ *
+ * eg;
+ *
+ * s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ * s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <asm/arch/map.h>
+
+/* machine specific hardware definitions should go after this */
+
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h
new file mode 100644
index 0000000..749227c
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/idle.h
@@ -0,0 +1,28 @@
+/* linux/include/asm-arm/arch-s3c2410/idle.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU Idle controls
+ *
+ * Changelog:
+ * 28-Oct-2004 BJD Initial version
+ *
+*/
+
+#ifndef __ASM_ARCH_IDLE_H
+#define __ASM_ARCH_IDLE_H __FILE__
+
+/* This allows the over-ride of the default idle code, in case there
+ * is any other things to be done over idle (like DVS)
+*/
+
+extern void (*s3c24xx_idle)(void);
+
+extern void s3c24xx_default_idle(void);
+
+#endif /* __ASM_ARCH_IDLE_H */
diff --git a/include/asm-arm/arch-s3c2410/iic.h b/include/asm-arm/arch-s3c2410/iic.h
new file mode 100644
index 0000000..518547f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/iic.h
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-s3c2410/iic.h
+ *
+ * (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - I2C Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 05-Oct-2004 BJD Created file
+ * 19-Oct-2004 BJD Updated for s3c2440
+*/
+
+#ifndef __ASM_ARCH_IIC_H
+#define __ASM_ARCH_IIC_H __FILE__
+
+#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */
+
+/* Notes:
+ * 1) All frequencies are expressed in Hz
+ * 2) A value of zero is `do not care`
+*/
+
+struct s3c2410_platform_i2c {
+ unsigned int flags;
+ unsigned int slave_addr; /* slave address for controller */
+ unsigned long bus_freq; /* standard bus frequency */
+ unsigned long max_freq; /* max frequency for the bus */
+ unsigned long min_freq; /* min frequency for the bus */
+ unsigned int sda_delay; /* pclks (s3c2440 only) */
+};
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
new file mode 100644
index 0000000..418233a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/io.h
@@ -0,0 +1,196 @@
+/*
+ * linux/include/asm-arm/arch-s3c2410/io.h
+ * from linux/include/asm-arm/arch-rpc/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ * (C) 2003 Simtec Electronics
+ *
+ * Modifications:
+ * 06-Dec-1997 RMK Created.
+ * 02-Sep-2003 BJD Modified for S3C2410
+ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses. PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28
+ * and are translated to the start of IO. Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x) ((x) < (1<<28))
+
+#define PCIO_BASE (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+ "cmp %2, #(1<<28)\n\t" \
+ "mov %0, %2\n\t" \
+ "addcc %0, %0, %3\n\t" \
+ "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \
+ : "=&r" (temp) \
+ : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
+ : "cc"); \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
+static inline unsigned sz __in##fnsuffix (unsigned int port) \
+{ \
+ unsigned long temp, value; \
+ __asm__ __volatile__( \
+ "cmp %2, #(1<<28)\n\t" \
+ "mov %0, %2\n\t" \
+ "addcc %0, %0, %3\n\t" \
+ "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \
+ : "=&r" (temp), "=r" (value) \
+ : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \
+ : "cc"); \
+ return (unsigned sz)value; \
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+ return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr) \
+ DECLARE_DYN_IN(sz,fnsuffix,instr) \
+ DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port) \
+({ \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "strb %0, [%1, #0] @ outbc" \
+ : : "r" (value), "r" ((port))); \
+})
+
+#define __inbc(port) \
+({ \
+ unsigned char result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, #0] @ inbc" \
+ : "=r" (result) : "r" ((port))); \
+ result; \
+})
+
+#define __outwc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "strh %0, [%1, %2] @ outwc" \
+ : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "strh %0, [%1, #0] @ outwc" \
+ : : "r" (v), "r" ((port))); \
+})
+
+#define __inwc(port) \
+({ \
+ unsigned short result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldrh %0, [%1, %2] @ inwc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "ldrh %0, [%1, #0] @ inwc" \
+ : "=r" (result) : "r" ((port))); \
+ result; \
+})
+
+#define __outlc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, #0] @ outlc" \
+ : : "r" (v), "r" ((port))); \
+})
+
+#define __inlc(port) \
+({ \
+ unsigned long result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, #0] @ inlc" \
+ : "=r" (result) : "r" ((port))); \
+ result; \
+})
+
+#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+
+#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
+#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
+#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
+#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port) __ioaddr((port))
+
+#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x) (x)
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
new file mode 100644
index 0000000..d9773d6
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -0,0 +1,126 @@
+/* linux/include/asm-arm/arch-s3c2410/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 12-May-2003 BJD Created file
+ * 08-Jan-2003 BJD Linux 2.6.0 version, moved BAST bits out
+ * 12-Mar-2004 BJD Fixed bug in header protection
+ * 10-Feb-2005 BJD Added camera IRQ from guillaume.gourat@nexvision.tv
+ * 28-Feb-2005 BJD Updated s3c2440 IRQs
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */
+#define IRQ_EINT1 S3C2410_IRQ(1)
+#define IRQ_EINT2 S3C2410_IRQ(2)
+#define IRQ_EINT3 S3C2410_IRQ(3)
+#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
+#define IRQ_EINT8t23 S3C2410_IRQ(5)
+#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
+#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440 */
+#define IRQ_BATT_FLT S3C2410_IRQ(7)
+#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
+#define IRQ_WDT S3C2410_IRQ(9)
+#define IRQ_TIMER0 S3C2410_IRQ(10)
+#define IRQ_TIMER1 S3C2410_IRQ(11)
+#define IRQ_TIMER2 S3C2410_IRQ(12)
+#define IRQ_TIMER3 S3C2410_IRQ(13)
+#define IRQ_TIMER4 S3C2410_IRQ(14)
+#define IRQ_UART2 S3C2410_IRQ(15)
+#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
+#define IRQ_DMA0 S3C2410_IRQ(17)
+#define IRQ_DMA1 S3C2410_IRQ(18)
+#define IRQ_DMA2 S3C2410_IRQ(19)
+#define IRQ_DMA3 S3C2410_IRQ(20)
+#define IRQ_SDI S3C2410_IRQ(21)
+#define IRQ_SPI0 S3C2410_IRQ(22)
+#define IRQ_UART1 S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */
+#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */
+#define IRQ_USBD S3C2410_IRQ(25)
+#define IRQ_USBH S3C2410_IRQ(26)
+#define IRQ_IIC S3C2410_IRQ(27)
+#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */
+#define IRQ_SPI1 S3C2410_IRQ(29)
+#define IRQ_RTC S3C2410_IRQ(30)
+#define IRQ_ADCPARENT S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */
+#define IRQ_EINT5 S3C2410_IRQ(33)
+#define IRQ_EINT6 S3C2410_IRQ(34)
+#define IRQ_EINT7 S3C2410_IRQ(35)
+#define IRQ_EINT8 S3C2410_IRQ(36)
+#define IRQ_EINT9 S3C2410_IRQ(37)
+#define IRQ_EINT10 S3C2410_IRQ(38)
+#define IRQ_EINT11 S3C2410_IRQ(39)
+#define IRQ_EINT12 S3C2410_IRQ(40)
+#define IRQ_EINT13 S3C2410_IRQ(41)
+#define IRQ_EINT14 S3C2410_IRQ(42)
+#define IRQ_EINT15 S3C2410_IRQ(43)
+#define IRQ_EINT16 S3C2410_IRQ(44)
+#define IRQ_EINT17 S3C2410_IRQ(45)
+#define IRQ_EINT18 S3C2410_IRQ(46)
+#define IRQ_EINT19 S3C2410_IRQ(47)
+#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */
+#define IRQ_EINT21 S3C2410_IRQ(49)
+#define IRQ_EINT22 S3C2410_IRQ(50)
+#define IRQ_EINT23 S3C2410_IRQ(51)
+
+
+#define IRQ_EINT(x) S3C2410_IRQ((x >= 4) ? (IRQ_EINT4 + (x) - 4) : (S3C2410_IRQ(0) + (x)))
+
+#define IRQ_LCD_FIFO S3C2410_IRQ(52)
+#define IRQ_LCD_FRAME S3C2410_IRQ(53)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+#define IRQ_S3CUART_RX0 S3C2410_IRQ(54) /* 70 */
+#define IRQ_S3CUART_TX0 S3C2410_IRQ(55) /* 71 */
+#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56)
+
+#define IRQ_S3CUART_RX1 S3C2410_IRQ(57)
+#define IRQ_S3CUART_TX1 S3C2410_IRQ(58)
+#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59)
+
+#define IRQ_S3CUART_RX2 S3C2410_IRQ(60)
+#define IRQ_S3CUART_TX2 S3C2410_IRQ(61)
+#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62)
+
+#define IRQ_TC S3C2410_IRQ(63)
+#define IRQ_ADC S3C2410_IRQ(64)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C S3C2410_IRQ(65)
+#define IRQ_S3C2440_CAM_P S3C2410_IRQ(66)
+#define IRQ_S3C2440_WDT S3C2410_IRQ(67)
+#define IRQ_S3C2440_AC97 S3C2410_IRQ(68)
+
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
new file mode 100644
index 0000000..1833ea5
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -0,0 +1,192 @@
+/* linux/include/asm-arm/arch-s3c2410/map.h
+ *
+ * (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 12-May-2003 BJD Created file
+ * 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out
+ * 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv
+ * 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+/* we have a bit of a tight squeeze to fit all our registers from
+ * 0xF00000000 upwards, since we use all of the nGCS space in some
+ * capacity, and also need to fit the S3C2410 registers in as well...
+ *
+ * we try to ensure stuff like the IRQ registers are available for
+ * an single MOVS instruction (ie, only 8 bits of set data)
+ *
+ * Note, we are trying to remove some of these from the implementation
+ * as they are only useful to certain drivers...
+ */
+
+#ifndef __ASSEMBLY__
+#define S3C2410_ADDR(x) ((void __iomem *)0xF0000000 + (x))
+#else
+#define S3C2410_ADDR(x) (0xF0000000 + (x))
+#endif
+
+#define S3C2400_ADDR(x) S3C2410_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ S3C2410_ADDR(0x00000000)
+#define S3C2400_PA_IRQ (0x14400000)
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C2410_ADDR(0x00100000)
+#define S3C2400_PA_MEMCTRL (0x14000000)
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C24XX_VA_USBHOST S3C2410_ADDR(0x00200000)
+#define S3C2400_PA_USBHOST (0x14200000)
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C24XX_VA_DMA S3C2410_ADDR(0x00300000)
+#define S3C2400_PA_DMA (0x14600000)
+#define S3C2410_PA_DMA (0x4B000000)
+#define S3C24XX_SZ_DMA SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR S3C2410_ADDR(0x00400000)
+#define S3C2400_PA_CLKPWR (0x14800000)
+#define S3C2410_PA_CLKPWR (0x4C000000)
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* LCD controller */
+#define S3C24XX_VA_LCD S3C2410_ADDR(0x00600000)
+#define S3C2400_PA_LCD (0x14A00000)
+#define S3C2410_PA_LCD (0x4D000000)
+#define S3C24XX_SZ_LCD SZ_1M
+
+/* NAND flash controller */
+#define S3C24XX_VA_NAND S3C2410_ADDR(0x00700000)
+#define S3C2410_PA_NAND (0x4E000000)
+#define S3C24XX_SZ_NAND SZ_1M
+
+/* MMC controller - available on the S3C2400 */
+#define S3C2400_VA_MMC S3C2400_ADDR(0x00700000)
+#define S3C2400_PA_MMC (0x15A00000)
+#define S3C2400_SZ_MMC SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART S3C2410_ADDR(0x00800000)
+#define S3C2400_PA_UART (0x15000000)
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_SZ_UART SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER S3C2410_ADDR(0x00900000)
+#define S3C2400_PA_TIMER (0x15100000)
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* USB Device port */
+#define S3C24XX_VA_USBDEV S3C2410_ADDR(0x00A00000)
+#define S3C2400_PA_USBDEV (0x15200140)
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C2410_ADDR(0x00B00000)
+#define S3C2400_PA_WATCHDOG (0x15300000)
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C24XX_VA_IIC S3C2410_ADDR(0x00C00000)
+#define S3C2400_PA_IIC (0x15400000)
+#define S3C2410_PA_IIC (0x54000000)
+#define S3C24XX_SZ_IIC SZ_1M
+
+#define VA_IIC_BASE (S3C24XX_VA_IIC)
+
+/* IIS controller */
+#define S3C24XX_VA_IIS S3C2410_ADDR(0x00D00000)
+#define S3C2400_PA_IIS (0x15508000)
+#define S3C2410_PA_IIS (0x55000000)
+#define S3C24XX_SZ_IIS SZ_1M
+
+/* GPIO ports */
+#define S3C24XX_VA_GPIO S3C2410_ADDR(0x00E00000)
+#define S3C2400_PA_GPIO (0x15600000)
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_SZ_GPIO SZ_1M
+
+/* RTC */
+#define S3C24XX_VA_RTC S3C2410_ADDR(0x00F00000)
+#define S3C2400_PA_RTC (0x15700040)
+#define S3C2410_PA_RTC (0x57000000)
+#define S3C24XX_SZ_RTC SZ_1M
+
+/* ADC */
+#define S3C24XX_VA_ADC S3C2410_ADDR(0x01000000)
+#define S3C2400_PA_ADC (0x15800000)
+#define S3C2410_PA_ADC (0x58000000)
+#define S3C24XX_SZ_ADC SZ_1M
+
+/* SPI */
+#define S3C24XX_VA_SPI S3C2410_ADDR(0x01100000)
+#define S3C2400_PA_SPI (0x15900000)
+#define S3C2410_PA_SPI (0x59000000)
+#define S3C24XX_SZ_SPI SZ_1M
+
+/* SDI */
+#define S3C24XX_VA_SDI S3C2410_ADDR(0x01200000)
+#define S3C2410_PA_SDI (0x5A000000)
+#define S3C24XX_SZ_SDI SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF (0x4F000000)
+#define S3C2440_SZ_CAMIF SZ_1M
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA (S3C2410_CS6)
+
+#define S3C2400_CS0 (0x00000000)
+#define S3C2400_CS1 (0x02000000)
+#define S3C2400_CS2 (0x04000000)
+#define S3C2400_CS3 (0x06000000)
+#define S3C2400_CS4 (0x08000000)
+#define S3C2400_CS5 (0x0A000000)
+#define S3C2400_CS6 (0x0C000000)
+#define S3C2400_CS7 (0x0E000000)
+
+#define S3C2400_SDRAM_PA (S3C2400_CS6)
+
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h
new file mode 100644
index 0000000..3380ab1
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/memory.h
@@ -0,0 +1,44 @@
+/*
+ * linux/include/asm-arm/arch-s3c2410/memory.h
+ *
+ * from linux/include/asm-arm/arch-rpc/memory.h
+ *
+ * Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 20-Oct-1996 RMK Created
+ * 31-Dec-1997 RMK Fixed definitions to reduce warnings
+ * 11-Jan-1998 RMK Uninlined to reduce hits on cache
+ * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
+ * 21-Mar-1999 RMK Renamed to memory.h
+ * RMK Added TASK_SIZE and PAGE_OFFSET
+ * 05-Apr-2004 BJD Copied and altered for arch-s3c2410
+ * 17-Mar-2005 LCVR Modified for S3C2400
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * DRAM starts at 0x30000000 for S3C2410/S3C2440
+ * and at 0x0C000000 for S3C2400
+ */
+#ifdef CONFIG_CPU_S3C2400
+#define PHYS_OFFSET (0x0C000000UL)
+#else
+#define PHYS_OFFSET (0x30000000UL)
+#endif
+
+/*
+ * These are exactly the same on the S3C2410 as the
+ * physical memory view.
+*/
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/nand.h b/include/asm-arm/arch-s3c2410/nand.h
new file mode 100644
index 0000000..9148ac0
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/nand.h
@@ -0,0 +1,48 @@
+/* linux/include/asm-arm/arch-s3c2410/nand.h
+ *
+ * (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - NAND device controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 23-Sep-2004 BJD Created file
+*/
+
+/* struct s3c2410_nand_set
+ *
+ * define an set of one or more nand chips registered with an unique mtd
+ *
+ * nr_chips = number of chips in this set
+ * nr_partitions = number of partitions pointed to be partitoons (or zero)
+ * name = name of set (optional)
+ * nr_map = map for low-layer logical to physical chip numbers (option)
+ * partitions = mtd partition list
+*/
+
+struct s3c2410_nand_set {
+ int nr_chips;
+ int nr_partitions;
+ char *name;
+ int *nr_map;
+ struct mtd_partition *partitions;
+};
+
+struct s3c2410_platform_nand {
+ /* timing information for controller, all times in nanoseconds */
+
+ int tacls; /* time for active CLE/ALE to nWE/nOE */
+ int twrph0; /* active time for nWE/nOE */
+ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */
+
+ int nr_sets;
+ struct s3c2410_nand_set *sets;
+
+ void (*select_chip)(struct s3c2410_nand_set *,
+ int chip);
+};
+
diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h
new file mode 100644
index 0000000..e40c934
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/otom-map.h
@@ -0,0 +1,30 @@
+/* linux/include/asm-arm/arch-s3c2410/otom-map.h
+ *
+ * (c) 2005 Guillaume GOURAT / NexVision
+ * guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __ASM_ARCH_OTOMMAP_H
+#define __ASM_ARCH_OTOMMAP_H
+
+#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */
+
+#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/param.h b/include/asm-arm/arch-s3c2410/param.h
new file mode 100644
index 0000000..483d3f1
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/param.h
@@ -0,0 +1,27 @@
+/* linux/include/asm-arm/arch-s3c2410/param.h
+ *
+ * (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Machine parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 02-Sep-2003 BJD Created file
+ * 12-Mar-2004 BJD Added include protection
+*/
+
+#ifndef __ASM_ARCH_PARAM_H
+#define __ASM_ARCH_PARAM_H
+
+/* we cannot get our timer down to 100Hz with the setup as is, but we can
+ * manage 200 clock ticks per second... if this is a problem, we can always
+ * add a software pre-scaler to the evil timer systems.
+*/
+
+#define HZ 200
+
+#endif /* __ASM_ARCH_PARAM_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h
new file mode 100644
index 0000000..15bfc2f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-adc.h
@@ -0,0 +1,63 @@
+/* linux/include/asm/arch-s3c2410/regs-adc.h
+ *
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * This program is free software; yosu can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 ADC registers
+ *
+ * Changelog:
+ * 27-09-2004 SAH Created file
+*/
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0 S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10)
+
+
+/* ADCCON Register Bits */
+#define S3C2410_ADCCON_ECFLG (1<<15)
+#define S3C2410_ADCCON_PRSCEN (1<<14)
+#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK (0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x) (((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK (0x7<<3)
+#define S3C2410_ADCCON_STDBM (1<<2)
+#define S3C2410_ADCCON_READ_START (1<<1)
+#define S3C2410_ADCCON_ENABLE_START (1<<0)
+#define S3C2410_ADCCON_STARTMASK (0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2410_ADCTSC_YM_SEN (1<<7)
+#define S3C2410_ADCTSC_YP_SEN (1<<6)
+#define S3C2410_ADCTSC_XM_SEN (1<<5)
+#define S3C2410_ADCTSC_XP_SEN (1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
+#define S3C2410_ADCTSC_AUTO_PST (1<<2)
+#define S3C2410_ADCTSC_XY_PST (0x3<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN (1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT0_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK (0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN (1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST (1<<14)
+#define S3C2410_ADCDAT1_XY_PST (0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK (0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
new file mode 100644
index 0000000..e5e938b
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -0,0 +1,122 @@
+/* linux/include/asm/arch-s3c2410/regs-clock.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+ *
+ * Changelog:
+ * 18-Aug-2004 Ben Dooks Added 2440 definitions
+ * 08-Aug-2004 Herbert Pötzl Added CLKCON definitions
+ * 19-06-2003 Ben Dooks Created file
+ * 12-03-2004 Ben Dooks Updated include protection
+ * 29-Sep-2004 Ben Dooks Fixed usage for assembly inclusion
+ * 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat)
+ * 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA
+ */
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE (1<<2)
+#define S3C2410_CLKCON_POWER (1<<3)
+#define S3C2410_CLKCON_NAND (1<<4)
+#define S3C2410_CLKCON_LCDC (1<<5)
+#define S3C2410_CLKCON_USBH (1<<6)
+#define S3C2410_CLKCON_USBD (1<<7)
+#define S3C2410_CLKCON_PWMT (1<<8)
+#define S3C2410_CLKCON_SDI (1<<9)
+#define S3C2410_CLKCON_UART0 (1<<10)
+#define S3C2410_CLKCON_UART1 (1<<11)
+#define S3C2410_CLKCON_UART2 (1<<12)
+#define S3C2410_CLKCON_GPIO (1<<13)
+#define S3C2410_CLKCON_RTC (1<<14)
+#define S3C2410_CLKCON_ADC (1<<15)
+#define S3C2410_CLKCON_IIC (1<<16)
+#define S3C2410_CLKCON_IIS (1<<17)
+#define S3C2410_CLKCON_SPI (1<<18)
+
+#define S3C2410_PLLCON_MDIVSHIFT 12
+#define S3C2410_PLLCON_PDIVSHIFT 4
+#define S3C2410_PLLCON_SDIVSHIFT 0
+#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
+#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1)
+#define S3C2410_PLLCON_SDIVMASK 3
+
+/* DCLKCON register addresses in gpio.h */
+
+#define S3C2410_DCLKCON_DCLK0EN (1<<0)
+#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1)
+#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1)
+#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+
+#define S3C2410_DCLKCON_DCLK1EN (1<<16)
+#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17)
+#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17)
+#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+
+#define S3C2410_CLKDIVN_PDIVN (1<<0)
+#define S3C2410_CLKDIVN_HDIVN (1<<1)
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int
+s3c2410_get_pll(int pllval, int baseclk)
+{
+ int mdiv, pdiv, sdiv;
+
+ mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2410_PLLCON_MDIVMASK;
+ pdiv &= S3C2410_PLLCON_PDIVMASK;
+ sdiv &= S3C2410_PLLCON_SDIVMASK;
+
+ return (baseclk * (mdiv + 8)) / ((pdiv + 2) << sdiv);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_CPU_S3C2440
+
+/* extra registers */
+#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA (1<<19)
+#define S3C2440_CLKCON_AC97 (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2 (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1)
+#define S3C2440_CLKDIVN_UCLK (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9)
+#define S3C2440_CAMDIVN_DVSEN (1<<12)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
new file mode 100644
index 0000000..a023b04
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-dsc.h
@@ -0,0 +1,183 @@
+/* linux/include/asm/hardware/s3c2410/regs-dsc.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 Signal Drive Strength Control
+ *
+ * Changelog:
+ * 11-Aug-2004 BJD Created file
+ * 25-Aug-2004 BJD Added the _SELECT_* defs for using with functions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_DSC_H
+#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
+
+#ifdef CONFIG_CPU_S3C2440
+
+#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
+
+#define S3C2440_SELECT_DSC0 (0)
+#define S3C2440_SELECT_DSC1 (1<<31)
+
+#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
+
+#define S3C2440_DSC0_DISABLE (1<<31)
+
+#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8)
+#define S3C2440_DSC0_ADDR_12mA (0<<8)
+#define S3C2440_DSC0_ADDR_10mA (1<<8)
+#define S3C2440_DSC0_ADDR_8mA (2<<8)
+#define S3C2440_DSC0_ADDR_6mA (3<<8)
+#define S3C2440_DSC0_ADDR_MASK (3<<8)
+
+/* D24..D31 */
+#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6)
+#define S3C2440_DSC0_DATA3_12mA (0<<6)
+#define S3C2440_DSC0_DATA3_10mA (1<<6)
+#define S3C2440_DSC0_DATA3_8mA (2<<6)
+#define S3C2440_DSC0_DATA3_6mA (3<<6)
+#define S3C2440_DSC0_DATA3_MASK (3<<6)
+
+/* D16..D23 */
+#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4)
+#define S3C2440_DSC0_DATA2_12mA (0<<4)
+#define S3C2440_DSC0_DATA2_10mA (1<<4)
+#define S3C2440_DSC0_DATA2_8mA (2<<4)
+#define S3C2440_DSC0_DATA2_6mA (3<<4)
+#define S3C2440_DSC0_DATA2_MASK (3<<4)
+
+/* D8..D15 */
+#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2)
+#define S3C2440_DSC0_DATA1_12mA (0<<2)
+#define S3C2440_DSC0_DATA1_10mA (1<<2)
+#define S3C2440_DSC0_DATA1_8mA (2<<2)
+#define S3C2440_DSC0_DATA1_6mA (3<<2)
+#define S3C2440_DSC0_DATA1_MASK (3<<2)
+
+/* D0..D7 */
+#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0)
+#define S3C2440_DSC0_DATA0_12mA (0<<0)
+#define S3C2440_DSC0_DATA0_10mA (1<<0)
+#define S3C2440_DSC0_DATA0_8mA (2<<0)
+#define S3C2440_DSC0_DATA0_6mA (3<<0)
+#define S3C2440_DSC0_DATA0_MASK (3<<0)
+
+#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28)
+#define S3C2440_DSC1_SCK1_12mA (0<<28)
+#define S3C2440_DSC1_SCK1_10mA (1<<28)
+#define S3C2440_DSC1_SCK1_8mA (2<<28)
+#define S3C2440_DSC1_SCK1_6mA (3<<28)
+#define S3C2440_DSC1_SCK1_MASK (3<<28)
+
+#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26)
+#define S3C2440_DSC1_SCK0_12mA (0<<26)
+#define S3C2440_DSC1_SCK0_10mA (1<<26)
+#define S3C2440_DSC1_SCK0_8mA (2<<26)
+#define S3C2440_DSC1_SCK0_6mA (3<<26)
+#define S3C2440_DSC1_SCK0_MASK (3<<26)
+
+#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24)
+#define S3C2440_DSC1_SCKE_10mA (0<<24)
+#define S3C2440_DSC1_SCKE_8mA (1<<24)
+#define S3C2440_DSC1_SCKE_6mA (2<<24)
+#define S3C2440_DSC1_SCKE_4mA (3<<24)
+#define S3C2440_DSC1_SCKE_MASK (3<<24)
+
+/* SDRAM nRAS/nCAS */
+#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22)
+#define S3C2440_DSC1_SDR_10mA (0<<22)
+#define S3C2440_DSC1_SDR_8mA (1<<22)
+#define S3C2440_DSC1_SDR_6mA (2<<22)
+#define S3C2440_DSC1_SDR_4mA (3<<22)
+#define S3C2440_DSC1_SDR_MASK (3<<22)
+
+/* NAND Flash Controller */
+#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20)
+#define S3C2440_DSC1_NFC_10mA (0<<20)
+#define S3C2440_DSC1_NFC_8mA (1<<20)
+#define S3C2440_DSC1_NFC_6mA (2<<20)
+#define S3C2440_DSC1_NFC_4mA (3<<20)
+#define S3C2440_DSC1_NFC_MASK (3<<20)
+
+/* nBE[0..3] */
+#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18)
+#define S3C2440_DSC1_nBE_10mA (0<<18)
+#define S3C2440_DSC1_nBE_8mA (1<<18)
+#define S3C2440_DSC1_nBE_6mA (2<<18)
+#define S3C2440_DSC1_nBE_4mA (3<<18)
+#define S3C2440_DSC1_nBE_MASK (3<<18)
+
+#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16)
+#define S3C2440_DSC1_WOE_10mA (0<<16)
+#define S3C2440_DSC1_WOE_8mA (1<<16)
+#define S3C2440_DSC1_WOE_6mA (2<<16)
+#define S3C2440_DSC1_WOE_4mA (3<<16)
+#define S3C2440_DSC1_WOE_MASK (3<<16)
+
+#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14)
+#define S3C2440_DSC1_CS7_10mA (0<<14)
+#define S3C2440_DSC1_CS7_8mA (1<<14)
+#define S3C2440_DSC1_CS7_6mA (2<<14)
+#define S3C2440_DSC1_CS7_4mA (3<<14)
+#define S3C2440_DSC1_CS7_MASK (3<<14)
+
+#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12)
+#define S3C2440_DSC1_CS6_10mA (0<<12)
+#define S3C2440_DSC1_CS6_8mA (1<<12)
+#define S3C2440_DSC1_CS6_6mA (2<<12)
+#define S3C2440_DSC1_CS6_4mA (3<<12)
+#define S3C2440_DSC1_CS6_MASK (3<<12)
+
+#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10)
+#define S3C2440_DSC1_CS5_10mA (0<<10)
+#define S3C2440_DSC1_CS5_8mA (1<<10)
+#define S3C2440_DSC1_CS5_6mA (2<<10)
+#define S3C2440_DSC1_CS5_4mA (3<<10)
+#define S3C2440_DSC1_CS5_MASK (3<<10)
+
+#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8)
+#define S3C2440_DSC1_CS4_10mA (0<<8)
+#define S3C2440_DSC1_CS4_8mA (1<<8)
+#define S3C2440_DSC1_CS4_6mA (2<<8)
+#define S3C2440_DSC1_CS4_4mA (3<<8)
+#define S3C2440_DSC1_CS4_MASK (3<<8)
+
+#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6)
+#define S3C2440_DSC1_CS3_10mA (0<<6)
+#define S3C2440_DSC1_CS3_8mA (1<<6)
+#define S3C2440_DSC1_CS3_6mA (2<<6)
+#define S3C2440_DSC1_CS3_4mA (3<<6)
+#define S3C2440_DSC1_CS3_MASK (3<<6)
+
+#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4)
+#define S3C2440_DSC1_CS2_10mA (0<<4)
+#define S3C2440_DSC1_CS2_8mA (1<<4)
+#define S3C2440_DSC1_CS2_6mA (2<<4)
+#define S3C2440_DSC1_CS2_4mA (3<<4)
+#define S3C2440_DSC1_CS2_MASK (3<<4)
+
+#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2)
+#define S3C2440_DSC1_CS1_10mA (0<<2)
+#define S3C2440_DSC1_CS1_8mA (1<<2)
+#define S3C2440_DSC1_CS1_6mA (2<<2)
+#define S3C2440_DSC1_CS1_4mA (3<<2)
+#define S3C2440_DSC1_CS1_MASK (3<<2)
+
+#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0
+#define S3C2440_DSC1_CS0_10mA (0<<0)
+#define S3C2440_DSC1_CS0_8mA (1<<0)
+#define S3C2440_DSC1_CS0_6mA (2<<0)
+#define S3C2440_DSC1_CS0_4mA (3<<0)
+#define S3C2440_DSC1_CS0_MASK (3<<0)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#endif /* __ASM_ARCH_REGS_DSC_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
new file mode 100644
index 0000000..2053cba
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -0,0 +1,831 @@
+/* linux/include/asm/hardware/s3c2410/regs-gpio.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 GPIO register definitions
+ *
+ * Changelog:
+ * 19-06-2003 BJD Created file
+ * 23-06-2003 BJD Updated GSTATUS registers
+ * 12-03-2004 BJD Updated include protection
+ * 20-07-2004 BJD Added GPIO pin numbers, added Port A definitions
+ * 04-10-2004 BJD Fixed number of bugs, added EXT IRQ filter defs
+ * 17-10-2004 BJD Added GSTATUS1 register definitions
+ * 18-11-2004 BJD Fixed definitions of GPE3, GPE4, GPE5 and GPE6
+ * 18-11-2004 BJD Added S3C2440 AC97 controls
+ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+ * 28-Mar-2005 LCVR Fixed definition of GPB10
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA (32*0)
+#define S3C2410_GPIO_BANKB (32*1)
+#define S3C2410_GPIO_BANKC (32*2)
+#define S3C2410_GPIO_BANKD (32*3)
+#define S3C2410_GPIO_BANKE (32*4)
+#define S3C2410_GPIO_BANKF (32*5)
+#define S3C2410_GPIO_BANKG (32*6)
+#define S3C2410_GPIO_BANKH (32*7)
+
+#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
+
+/* configure GPIO ports A..G */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+
+/* port A - 22bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT (0<<0)
+#define S3C2410_GPA0_ADDR0 (1<<0)
+
+#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT (0<<1)
+#define S3C2410_GPA1_ADDR16 (1<<1)
+
+#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT (0<<2)
+#define S3C2410_GPA2_ADDR17 (1<<2)
+
+#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT (0<<3)
+#define S3C2410_GPA3_ADDR18 (1<<3)
+
+#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT (0<<4)
+#define S3C2410_GPA4_ADDR19 (1<<4)
+
+#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT (0<<5)
+#define S3C2410_GPA5_ADDR20 (1<<5)
+
+#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT (0<<6)
+#define S3C2410_GPA6_ADDR21 (1<<6)
+
+#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT (0<<7)
+#define S3C2410_GPA7_ADDR22 (1<<7)
+
+#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT (0<<8)
+#define S3C2410_GPA8_ADDR23 (1<<8)
+
+#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT (0<<9)
+#define S3C2410_GPA9_ADDR24 (1<<9)
+
+#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+
+#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+
+#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT (0<<12)
+#define S3C2410_GPA12_nGCS1 (1<<12)
+
+#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT (0<<13)
+#define S3C2410_GPA13_nGCS2 (1<<13)
+
+#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT (0<<14)
+#define S3C2410_GPA14_nGCS3 (1<<14)
+
+#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT (0<<15)
+#define S3C2410_GPA15_nGCS4 (1<<15)
+
+#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT (0<<16)
+#define S3C2410_GPA16_nGCS5 (1<<16)
+
+#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT (0<<17)
+#define S3C2410_GPA17_CLE (1<<17)
+
+#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT (0<<18)
+#define S3C2410_GPA18_ALE (1<<18)
+
+#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT (0<<19)
+#define S3C2410_GPA19_nFWE (1<<19)
+
+#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT (0<<20)
+#define S3C2410_GPA20_nFRE (1<<20)
+
+#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT (0<<22)
+#define S3C2410_GPA22_nFCE (1<<22)
+
+/* 0x08 and 0x0c are reserved */
+
+/* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ * 00 = input, 01 = output, 10=special function, 11=reserved
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP S3C2410_GPIOREG(0x18)
+
+/* no i/o pin in port b can have value 3! */
+
+#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
+#define S3C2410_GPB0_INP (0x00 << 0)
+#define S3C2410_GPB0_OUTP (0x01 << 0)
+#define S3C2410_GPB0_TOUT0 (0x02 << 0)
+
+#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
+#define S3C2410_GPB1_INP (0x00 << 2)
+#define S3C2410_GPB1_OUTP (0x01 << 2)
+#define S3C2410_GPB1_TOUT1 (0x02 << 2)
+
+#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
+#define S3C2410_GPB2_INP (0x00 << 4)
+#define S3C2410_GPB2_OUTP (0x01 << 4)
+#define S3C2410_GPB2_TOUT2 (0x02 << 4)
+
+#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
+#define S3C2410_GPB3_INP (0x00 << 6)
+#define S3C2410_GPB3_OUTP (0x01 << 6)
+#define S3C2410_GPB3_TOUT3 (0x02 << 6)
+
+#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
+#define S3C2410_GPB4_INP (0x00 << 8)
+#define S3C2410_GPB4_OUTP (0x01 << 8)
+#define S3C2410_GPB4_TCLK0 (0x02 << 8)
+#define S3C2410_GPB4_MASK (0x03 << 8)
+
+#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
+#define S3C2410_GPB5_INP (0x00 << 10)
+#define S3C2410_GPB5_OUTP (0x01 << 10)
+#define S3C2410_GPB5_nXBACK (0x02 << 10)
+
+#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
+#define S3C2410_GPB6_INP (0x00 << 12)
+#define S3C2410_GPB6_OUTP (0x01 << 12)
+#define S3C2410_GPB6_nXBREQ (0x02 << 12)
+
+#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
+#define S3C2410_GPB7_INP (0x00 << 14)
+#define S3C2410_GPB7_OUTP (0x01 << 14)
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+
+#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
+#define S3C2410_GPB8_INP (0x00 << 16)
+#define S3C2410_GPB8_OUTP (0x01 << 16)
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+
+#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
+#define S3C2410_GPB9_INP (0x00 << 18)
+#define S3C2410_GPB9_OUTP (0x01 << 18)
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+
+#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
+#define S3C2410_GPB10_INP (0x00 << 20)
+#define S3C2410_GPB10_OUTP (0x01 << 20)
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP S3C2410_GPIOREG(0x28)
+
+#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
+#define S3C2410_GPC0_INP (0x00 << 0)
+#define S3C2410_GPC0_OUTP (0x01 << 0)
+#define S3C2410_GPC0_LEND (0x02 << 0)
+
+#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
+#define S3C2410_GPC1_INP (0x00 << 2)
+#define S3C2410_GPC1_OUTP (0x01 << 2)
+#define S3C2410_GPC1_VCLK (0x02 << 2)
+
+#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
+#define S3C2410_GPC2_INP (0x00 << 4)
+#define S3C2410_GPC2_OUTP (0x01 << 4)
+#define S3C2410_GPC2_VLINE (0x02 << 4)
+
+#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
+#define S3C2410_GPC3_INP (0x00 << 6)
+#define S3C2410_GPC3_OUTP (0x01 << 6)
+#define S3C2410_GPC3_VFRAME (0x02 << 6)
+
+#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
+#define S3C2410_GPC4_INP (0x00 << 8)
+#define S3C2410_GPC4_OUTP (0x01 << 8)
+#define S3C2410_GPC4_VM (0x02 << 8)
+
+#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
+#define S3C2410_GPC5_INP (0x00 << 10)
+#define S3C2410_GPC5_OUTP (0x01 << 10)
+#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
+
+#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
+#define S3C2410_GPC6_INP (0x00 << 12)
+#define S3C2410_GPC6_OUTP (0x01 << 12)
+#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
+
+#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
+#define S3C2410_GPC7_INP (0x00 << 14)
+#define S3C2410_GPC7_OUTP (0x01 << 14)
+#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
+
+#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
+#define S3C2410_GPC8_INP (0x00 << 16)
+#define S3C2410_GPC8_OUTP (0x01 << 16)
+#define S3C2410_GPC8_VD0 (0x02 << 16)
+
+#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
+#define S3C2410_GPC9_INP (0x00 << 18)
+#define S3C2410_GPC9_OUTP (0x01 << 18)
+#define S3C2410_GPC9_VD1 (0x02 << 18)
+
+#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
+#define S3C2410_GPC10_INP (0x00 << 20)
+#define S3C2410_GPC10_OUTP (0x01 << 20)
+#define S3C2410_GPC10_VD2 (0x02 << 20)
+
+#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
+#define S3C2410_GPC11_INP (0x00 << 22)
+#define S3C2410_GPC11_OUTP (0x01 << 22)
+#define S3C2410_GPC11_VD3 (0x02 << 22)
+
+#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
+#define S3C2410_GPC12_INP (0x00 << 24)
+#define S3C2410_GPC12_OUTP (0x01 << 24)
+#define S3C2410_GPC12_VD4 (0x02 << 24)
+
+#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
+#define S3C2410_GPC13_INP (0x00 << 26)
+#define S3C2410_GPC13_OUTP (0x01 << 26)
+#define S3C2410_GPC13_VD5 (0x02 << 26)
+
+#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
+#define S3C2410_GPC14_INP (0x00 << 28)
+#define S3C2410_GPC14_OUTP (0x01 << 28)
+#define S3C2410_GPC14_VD6 (0x02 << 28)
+
+#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
+#define S3C2410_GPC15_INP (0x00 << 30)
+#define S3C2410_GPC15_OUTP (0x01 << 30)
+#define S3C2410_GPC15_VD7 (0x02 << 30)
+
+/* Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+*/
+
+#define S3C2410_GPDCON S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP S3C2410_GPIOREG(0x38)
+
+#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
+#define S3C2410_GPD0_INP (0x00 << 0)
+#define S3C2410_GPD0_OUTP (0x01 << 0)
+#define S3C2410_GPD0_VD8 (0x02 << 0)
+
+#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
+#define S3C2410_GPD1_INP (0x00 << 2)
+#define S3C2410_GPD1_OUTP (0x01 << 2)
+#define S3C2410_GPD1_VD9 (0x02 << 2)
+
+#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
+#define S3C2410_GPD2_INP (0x00 << 4)
+#define S3C2410_GPD2_OUTP (0x01 << 4)
+#define S3C2410_GPD2_VD10 (0x02 << 4)
+
+#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
+#define S3C2410_GPD3_INP (0x00 << 6)
+#define S3C2410_GPD3_OUTP (0x01 << 6)
+#define S3C2410_GPD3_VD11 (0x02 << 6)
+
+#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
+#define S3C2410_GPD4_INP (0x00 << 8)
+#define S3C2410_GPD4_OUTP (0x01 << 8)
+#define S3C2410_GPD4_VD12 (0x02 << 8)
+
+#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
+#define S3C2410_GPD5_INP (0x00 << 10)
+#define S3C2410_GPD5_OUTP (0x01 << 10)
+#define S3C2410_GPD5_VD13 (0x02 << 10)
+
+#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
+#define S3C2410_GPD6_INP (0x00 << 12)
+#define S3C2410_GPD6_OUTP (0x01 << 12)
+#define S3C2410_GPD6_VD14 (0x02 << 12)
+
+#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
+#define S3C2410_GPD7_INP (0x00 << 14)
+#define S3C2410_GPD7_OUTP (0x01 << 14)
+#define S3C2410_GPD7_VD15 (0x02 << 14)
+
+#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
+#define S3C2410_GPD8_INP (0x00 << 16)
+#define S3C2410_GPD8_OUTP (0x01 << 16)
+#define S3C2410_GPD8_VD16 (0x02 << 16)
+
+#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
+#define S3C2410_GPD9_INP (0x00 << 18)
+#define S3C2410_GPD9_OUTP (0x01 << 18)
+#define S3C2410_GPD9_VD17 (0x02 << 18)
+
+#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
+#define S3C2410_GPD10_INP (0x00 << 20)
+#define S3C2410_GPD10_OUTP (0x01 << 20)
+#define S3C2410_GPD10_VD18 (0x02 << 20)
+
+#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
+#define S3C2410_GPD11_INP (0x00 << 22)
+#define S3C2410_GPD11_OUTP (0x01 << 22)
+#define S3C2410_GPD11_VD19 (0x02 << 22)
+
+#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
+#define S3C2410_GPD12_INP (0x00 << 24)
+#define S3C2410_GPD12_OUTP (0x01 << 24)
+#define S3C2410_GPD12_VD20 (0x02 << 24)
+
+#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
+#define S3C2410_GPD13_INP (0x00 << 26)
+#define S3C2410_GPD13_OUTP (0x01 << 26)
+#define S3C2410_GPD13_VD21 (0x02 << 26)
+
+#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
+#define S3C2410_GPD14_INP (0x00 << 28)
+#define S3C2410_GPD14_OUTP (0x01 << 28)
+#define S3C2410_GPD14_VD22 (0x02 << 28)
+
+#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
+#define S3C2410_GPD15_INP (0x00 << 30)
+#define S3C2410_GPD15_OUTP (0x01 << 30)
+#define S3C2410_GPD15_VD23 (0x02 << 30)
+
+/* Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+*/
+
+#define S3C2410_GPECON S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP S3C2410_GPIOREG(0x48)
+
+#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
+#define S3C2410_GPE0_INP (0x00 << 0)
+#define S3C2410_GPE0_OUTP (0x01 << 0)
+#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
+#define S3C2410_GPE0_MASK (0x03 << 0)
+
+#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
+#define S3C2410_GPE1_INP (0x00 << 2)
+#define S3C2410_GPE1_OUTP (0x01 << 2)
+#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
+#define S3C2410_GPE1_MASK (0x03 << 2)
+
+#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
+#define S3C2410_GPE2_INP (0x00 << 4)
+#define S3C2410_GPE2_OUTP (0x01 << 4)
+#define S3C2410_GPE2_CDCLK (0x02 << 4)
+
+#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
+#define S3C2410_GPE3_INP (0x00 << 6)
+#define S3C2410_GPE3_OUTP (0x01 << 6)
+#define S3C2410_GPE3_I2SSDI (0x02 << 6)
+#define S3C2410_GPE3_nSS0 (0x03 << 6)
+#define S3C2410_GPE3_MASK (0x03 << 6)
+
+#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
+#define S3C2410_GPE4_INP (0x00 << 8)
+#define S3C2410_GPE4_OUTP (0x01 << 8)
+#define S3C2410_GPE4_I2SSDO (0x02 << 8)
+#define S3C2410_GPE4_I2SSDI (0x03 << 8)
+#define S3C2410_GPE4_MASK (0x03 << 8)
+
+#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
+#define S3C2410_GPE5_INP (0x00 << 10)
+#define S3C2410_GPE5_OUTP (0x01 << 10)
+#define S3C2410_GPE5_SDCLK (0x02 << 10)
+
+#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
+#define S3C2410_GPE6_INP (0x00 << 12)
+#define S3C2410_GPE6_OUTP (0x01 << 12)
+#define S3C2410_GPE6_SDCMD (0x02 << 12)
+
+#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
+#define S3C2410_GPE7_INP (0x00 << 14)
+#define S3C2410_GPE7_OUTP (0x01 << 14)
+#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
+
+#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
+#define S3C2410_GPE8_INP (0x00 << 16)
+#define S3C2410_GPE8_OUTP (0x01 << 16)
+#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
+
+#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
+#define S3C2410_GPE9_INP (0x00 << 18)
+#define S3C2410_GPE9_OUTP (0x01 << 18)
+#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
+
+#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
+#define S3C2410_GPE10_INP (0x00 << 20)
+#define S3C2410_GPE10_OUTP (0x01 << 20)
+#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
+
+#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
+#define S3C2410_GPE11_INP (0x00 << 22)
+#define S3C2410_GPE11_OUTP (0x01 << 22)
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+
+#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
+#define S3C2410_GPE12_INP (0x00 << 24)
+#define S3C2410_GPE12_OUTP (0x01 << 24)
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
+#define S3C2410_GPE13_INP (0x00 << 26)
+#define S3C2410_GPE13_OUTP (0x01 << 26)
+#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
+
+#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
+#define S3C2410_GPE14_INP (0x00 << 28)
+#define S3C2410_GPE14_OUTP (0x01 << 28)
+#define S3C2410_GPE14_IICSCL (0x02 << 28)
+#define S3C2410_GPE14_MASK (0x03 << 28)
+
+#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
+#define S3C2410_GPE15_INP (0x00 << 30)
+#define S3C2410_GPE15_OUTP (0x01 << 30)
+#define S3C2410_GPE15_IICSDA (0x02 << 30)
+#define S3C2410_GPE15_MASK (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK (0x03 << 2)
+#define S3C2440_GPE2_ACRESET (0x03 << 4)
+#define S3C2440_GPE3_ACIN (0x03 << 6)
+#define S3C2440_GPE4_ACOUT (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x) (1<<(x))
+
+/* Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPFCON S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP S3C2410_GPIOREG(0x58)
+
+#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
+#define S3C2410_GPF0_INP (0x00 << 0)
+#define S3C2410_GPF0_OUTP (0x01 << 0)
+#define S3C2410_GPF0_EINT0 (0x02 << 0)
+
+#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
+#define S3C2410_GPF1_INP (0x00 << 2)
+#define S3C2410_GPF1_OUTP (0x01 << 2)
+#define S3C2410_GPF1_EINT1 (0x02 << 2)
+
+#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
+#define S3C2410_GPF2_INP (0x00 << 4)
+#define S3C2410_GPF2_OUTP (0x01 << 4)
+#define S3C2410_GPF2_EINT2 (0x02 << 4)
+
+#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
+#define S3C2410_GPF3_INP (0x00 << 6)
+#define S3C2410_GPF3_OUTP (0x01 << 6)
+#define S3C2410_GPF3_EINT3 (0x02 << 6)
+
+#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
+#define S3C2410_GPF4_INP (0x00 << 8)
+#define S3C2410_GPF4_OUTP (0x01 << 8)
+#define S3C2410_GPF4_EINT4 (0x02 << 8)
+
+#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
+#define S3C2410_GPF5_INP (0x00 << 10)
+#define S3C2410_GPF5_OUTP (0x01 << 10)
+#define S3C2410_GPF5_EINT5 (0x02 << 10)
+
+#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
+#define S3C2410_GPF6_INP (0x00 << 12)
+#define S3C2410_GPF6_OUTP (0x01 << 12)
+#define S3C2410_GPF6_EINT6 (0x02 << 12)
+
+#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
+#define S3C2410_GPF7_INP (0x00 << 14)
+#define S3C2410_GPF7_OUTP (0x01 << 14)
+#define S3C2410_GPF7_EINT7 (0x02 << 14)
+
+/* Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPGCON S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP S3C2410_GPIOREG(0x68)
+
+#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
+#define S3C2410_GPG0_INP (0x00 << 0)
+#define S3C2410_GPG0_OUTP (0x01 << 0)
+#define S3C2410_GPG0_EINT8 (0x02 << 0)
+
+#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
+#define S3C2410_GPG1_INP (0x00 << 2)
+#define S3C2410_GPG1_OUTP (0x01 << 2)
+#define S3C2410_GPG1_EINT9 (0x02 << 2)
+
+#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
+#define S3C2410_GPG2_INP (0x00 << 4)
+#define S3C2410_GPG2_OUTP (0x01 << 4)
+#define S3C2410_GPG2_EINT10 (0x02 << 4)
+
+#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
+#define S3C2410_GPG3_INP (0x00 << 6)
+#define S3C2410_GPG3_OUTP (0x01 << 6)
+#define S3C2410_GPG3_EINT11 (0x02 << 6)
+
+#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
+#define S3C2410_GPG4_INP (0x00 << 8)
+#define S3C2410_GPG4_OUTP (0x01 << 8)
+#define S3C2410_GPG4_EINT12 (0x02 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+
+#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
+#define S3C2410_GPG5_INP (0x00 << 10)
+#define S3C2410_GPG5_OUTP (0x01 << 10)
+#define S3C2410_GPG5_EINT13 (0x02 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
+
+#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
+#define S3C2410_GPG6_INP (0x00 << 12)
+#define S3C2410_GPG6_OUTP (0x01 << 12)
+#define S3C2410_GPG6_EINT14 (0x02 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
+#define S3C2410_GPG7_INP (0x00 << 14)
+#define S3C2410_GPG7_OUTP (0x01 << 14)
+#define S3C2410_GPG7_EINT15 (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
+
+#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
+#define S3C2410_GPG8_INP (0x00 << 16)
+#define S3C2410_GPG8_OUTP (0x01 << 16)
+#define S3C2410_GPG8_EINT16 (0x02 << 16)
+
+#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
+#define S3C2410_GPG9_INP (0x00 << 18)
+#define S3C2410_GPG9_OUTP (0x01 << 18)
+#define S3C2410_GPG9_EINT17 (0x02 << 18)
+
+#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
+#define S3C2410_GPG10_INP (0x00 << 20)
+#define S3C2410_GPG10_OUTP (0x01 << 20)
+#define S3C2410_GPG10_EINT18 (0x02 << 20)
+
+#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
+#define S3C2410_GPG11_INP (0x00 << 22)
+#define S3C2410_GPG11_OUTP (0x01 << 22)
+#define S3C2410_GPG11_EINT19 (0x02 << 22)
+#define S3C2410_GPG11_TCLK1 (0x03 << 22)
+
+#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
+#define S3C2410_GPG12_INP (0x00 << 24)
+#define S3C2410_GPG12_OUTP (0x01 << 24)
+#define S3C2410_GPG12_EINT20 (0x02 << 24)
+#define S3C2410_GPG12_XMON (0x03 << 24)
+
+#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
+#define S3C2410_GPG13_INP (0x00 << 26)
+#define S3C2410_GPG13_OUTP (0x01 << 26)
+#define S3C2410_GPG13_EINT21 (0x02 << 26)
+#define S3C2410_GPG13_nXPON (0x03 << 26)
+
+#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
+#define S3C2410_GPG14_INP (0x00 << 28)
+#define S3C2410_GPG14_OUTP (0x01 << 28)
+#define S3C2410_GPG14_EINT22 (0x02 << 28)
+#define S3C2410_GPG14_YMON (0x03 << 28)
+
+#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
+#define S3C2410_GPG15_INP (0x00 << 30)
+#define S3C2410_GPG15_OUTP (0x01 << 30)
+#define S3C2410_GPG15_EINT23 (0x02 << 30)
+#define S3C2410_GPG15_nYPON (0x03 << 30)
+
+
+#define S3C2410_GPG_PUPDIS(x) (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
+#define S3C2410_GPH0_INP (0x00 << 0)
+#define S3C2410_GPH0_OUTP (0x01 << 0)
+#define S3C2410_GPH0_nCTS0 (0x02 << 0)
+
+#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
+#define S3C2410_GPH1_INP (0x00 << 2)
+#define S3C2410_GPH1_OUTP (0x01 << 2)
+#define S3C2410_GPH1_nRTS0 (0x02 << 2)
+
+#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
+#define S3C2410_GPH2_INP (0x00 << 4)
+#define S3C2410_GPH2_OUTP (0x01 << 4)
+#define S3C2410_GPH2_TXD0 (0x02 << 4)
+
+#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
+#define S3C2410_GPH3_INP (0x00 << 6)
+#define S3C2410_GPH3_OUTP (0x01 << 6)
+#define S3C2410_GPH3_RXD0 (0x02 << 6)
+
+#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
+#define S3C2410_GPH4_INP (0x00 << 8)
+#define S3C2410_GPH4_OUTP (0x01 << 8)
+#define S3C2410_GPH4_TXD1 (0x02 << 8)
+
+#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
+#define S3C2410_GPH5_INP (0x00 << 10)
+#define S3C2410_GPH5_OUTP (0x01 << 10)
+#define S3C2410_GPH5_RXD1 (0x02 << 10)
+
+#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
+#define S3C2410_GPH6_INP (0x00 << 12)
+#define S3C2410_GPH6_OUTP (0x01 << 12)
+#define S3C2410_GPH6_TXD2 (0x02 << 12)
+#define S3C2410_GPH6_nRTS1 (0x03 << 12)
+
+#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
+#define S3C2410_GPH7_INP (0x00 << 14)
+#define S3C2410_GPH7_OUTP (0x01 << 14)
+#define S3C2410_GPH7_RXD2 (0x02 << 14)
+#define S3C2410_GPH7_nCTS1 (0x03 << 14)
+
+#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
+#define S3C2410_GPH8_INP (0x00 << 16)
+#define S3C2410_GPH8_OUTP (0x01 << 16)
+#define S3C2410_GPH8_UCLK (0x02 << 16)
+
+#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
+#define S3C2410_GPH9_INP (0x00 << 18)
+#define S3C2410_GPH9_OUTP (0x01 << 18)
+#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
+
+#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
+#define S3C2410_GPH10_INP (0x00 << 20)
+#define S3C2410_GPH10_OUTP (0x01 << 20)
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+
+/* miscellaneous control */
+
+#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
+#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN (0)
+#define S3C2410_MISCCR_SPUCR_HDIS (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN (0)
+#define S3C2410_MISCCR_SPUCR_LDIS (1<<1)
+
+#define S3C2410_MISCCR_USBDEV (0)
+#define S3C2410_MISCCR_USBHOST (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0 (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1 (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE (1<<19)
+#define S3C2410_MISCCR_SDSLEEP (7<<17)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+
+#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90)
+
+/* values for S3C2410_EXTINT0/1/2 */
+#define S3C2410_EXTINT_LOWLEV (0x00)
+#define S3C2410_EXTINT_HILEV (0x01)
+#define S3C2410_EXTINT_FALLEDGE (0x02)
+#define S3C2410_EXTINT_RISEEDGE (0x04)
+#define S3C2410_EXTINT_BOTHEDGE (0x06)
+
+/* interrupt filtering conrrol for EINT16..EINT23 */
+#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK (0x00)
+#define S3C2410_EINTFLT_EXTCLK (1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ */
+
+#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT (1<<3)
+#define S3C2410_GSTATUS0_NCON (1<<2)
+#define S3C2410_GSTATUS0_RnB (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK (0xffff0000)
+#define S3C2410_GSTATUS1_2410 (0x32410000)
+#define S3C2410_GSTATUS1_2440 (0x32440000)
+
+#define S3C2410_GSTATUS2_WTRESET (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET (1<<1)
+#define S3C2410_GSTATUS2_PONRESET (1<<0)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
new file mode 100644
index 0000000..3ad2324
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h
@@ -0,0 +1,101 @@
+/* linux/include/asm/hardware/s3c2410/regs-gpioj.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 GPIO J register definitions
+ *
+ * Changelog:
+ * 11-Aug-2004 BJD Created file
+ * 10-Feb-2005 BJD Fix GPJ12 definition (Guillaume Gourat)
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIOJ_H
+#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
+
+/* Port J consists of 13 GPIO/Camera pins
+ *
+ * GPJCON has 2 bits for each of the input pins on port F
+ * 00 = 0 input, 1 output, 2 Camera
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2440_GPIO_BANKJ (416)
+
+#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0)
+#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4)
+#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8)
+
+#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
+#define S3C2440_GPJ0_INP (0x00 << 0)
+#define S3C2440_GPJ0_OUTP (0x01 << 0)
+#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0)
+
+#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
+#define S3C2440_GPJ1_INP (0x00 << 2)
+#define S3C2440_GPJ1_OUTP (0x01 << 2)
+#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2)
+
+#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
+#define S3C2440_GPJ2_INP (0x00 << 4)
+#define S3C2440_GPJ2_OUTP (0x01 << 4)
+#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4)
+
+#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
+#define S3C2440_GPJ3_INP (0x00 << 6)
+#define S3C2440_GPJ3_OUTP (0x01 << 6)
+#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6)
+
+#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
+#define S3C2440_GPJ4_INP (0x00 << 8)
+#define S3C2440_GPJ4_OUTP (0x01 << 8)
+#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8)
+
+#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
+#define S3C2440_GPJ5_INP (0x00 << 10)
+#define S3C2440_GPJ5_OUTP (0x01 << 10)
+#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10)
+
+#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
+#define S3C2440_GPJ6_INP (0x00 << 12)
+#define S3C2440_GPJ6_OUTP (0x01 << 12)
+#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12)
+
+#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
+#define S3C2440_GPJ7_INP (0x00 << 14)
+#define S3C2440_GPJ7_OUTP (0x01 << 14)
+#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14)
+
+#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
+#define S3C2440_GPJ8_INP (0x00 << 16)
+#define S3C2440_GPJ8_OUTP (0x01 << 16)
+#define S3C2440_GPJ8_CAMPCLK (0x02 << 16)
+
+#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
+#define S3C2440_GPJ9_INP (0x00 << 18)
+#define S3C2440_GPJ9_OUTP (0x01 << 18)
+#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18)
+
+#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
+#define S3C2440_GPJ10_INP (0x00 << 20)
+#define S3C2440_GPJ10_OUTP (0x01 << 20)
+#define S3C2440_GPJ10_CAMHREF (0x02 << 20)
+
+#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
+#define S3C2440_GPJ11_INP (0x00 << 22)
+#define S3C2440_GPJ11_OUTP (0x01 << 22)
+#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
+
+#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
+#define S3C2440_GPJ12_INP (0x00 << 24)
+#define S3C2440_GPJ12_OUTP (0x01 << 24)
+#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
+
+#endif /* __ASM_ARCH_REGS_GPIOJ_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-iic.h b/include/asm-arm/arch-s3c2410/regs-iic.h
new file mode 100644
index 0000000..fed3288
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-iic.h
@@ -0,0 +1,60 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-iic.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 I2C Controller
+ *
+ * Changelog:
+ * 03-Oct-2004 BJD Initial include for Linux
+ * 08-Nov-2004 BJD Added S3C2440 filter register
+*/
+
+#ifndef __ASM_ARCH_REGS_IIC_H
+#define __ASM_ARCH_REGS_IIC_H __FILE__
+
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICREG(x) (x)
+
+#define S3C2410_IICCON S3C2410_IICREG(0x00)
+#define S3C2410_IICSTAT S3C2410_IICREG(0x04)
+#define S3C2410_IICADD S3C2410_IICREG(0x08)
+#define S3C2410_IICDS S3C2410_IICREG(0x0C)
+#define S3C2440_IICLC S3C2410_IICREG(0x10)
+
+#define S3C2410_IICCON_ACKEN (1<<7)
+#define S3C2410_IICCON_TXDIV_16 (0<<6)
+#define S3C2410_IICCON_TXDIV_512 (1<<6)
+#define S3C2410_IICCON_IRQEN (1<<5)
+#define S3C2410_IICCON_IRQPEND (1<<4)
+#define S3C2410_IICCON_SCALE(x) ((x)&15)
+#define S3C2410_IICCON_SCALEMASK (0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX (2<<6)
+#define S3C2410_IICSTAT_MASTER_TX (3<<6)
+#define S3C2410_IICSTAT_SLAVE_RX (0<<6)
+#define S3C2410_IICSTAT_SLAVE_TX (1<<6)
+#define S3C2410_IICSTAT_MODEMASK (3<<6)
+
+#define S3C2410_IICSTAT_START (1<<5)
+#define S3C2410_IICSTAT_BUSBUSY (1<<5)
+#define S3C2410_IICSTAT_TXRXEN (1<<4)
+#define S3C2410_IICSTAT_ARBITR (1<<3)
+#define S3C2410_IICSTAT_ASSLAVE (1<<2)
+#define S3C2410_IICSTAT_ADDR0 (1<<1)
+#define S3C2410_IICSTAT_LASTBIT (1<<0)
+
+#define S3C2410_IICLC_SDA_DELAY0 (0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5 (1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10 (2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15 (3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON (1<<2)
+
+#endif /* __ASM_ARCH_REGS_IIC_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h
new file mode 100644
index 0000000..7ae8e1f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-iis.h
@@ -0,0 +1,72 @@
+/* linux/include/asm/arch-s3c2410/regs-iis.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 IIS register definition
+ *
+ * Changelog:
+ * 19-06-2003 BJD Created file
+ * 26-06-2003 BJD Finished off definitions for register addresses
+ * 12-03-2004 BJD Updated include protection
+ * 07-03-2005 BJD Added FIFO size flags and S3C2440 MPLL
+ */
+
+#ifndef __ASM_ARCH_REGS_IIS_H
+#define __ASM_ARCH_REGS_IIS_H
+
+#define S3C2410_IISCON (0x00)
+
+#define S3C2440_IISCON_MPLL (1<<9)
+#define S3C2410_IISCON_LRINDEX (1<<8)
+#define S3C2410_IISCON_TXFIFORDY (1<<7)
+#define S3C2410_IISCON_RXFIFORDY (1<<6)
+#define S3C2410_IISCON_TXDMAEN (1<<5)
+#define S3C2410_IISCON_RXDMAEN (1<<4)
+#define S3C2410_IISCON_TXIDLE (1<<3)
+#define S3C2410_IISCON_RXIDLE (1<<2)
+#define S3C2410_IISCON_IISEN (1<<0)
+
+#define S3C2410_IISMOD (0x04)
+
+#define S3C2410_IISMOD_SLAVE (1<<8)
+#define S3C2410_IISMOD_NOXFER (0<<6)
+#define S3C2410_IISMOD_RXMODE (1<<6)
+#define S3C2410_IISMOD_TXMODE (2<<6)
+#define S3C2410_IISMOD_TXRXMODE (3<<6)
+#define S3C2410_IISMOD_LR_LLOW (0<<5)
+#define S3C2410_IISMOD_LR_RLOW (1<<5)
+#define S3C2410_IISMOD_IIS (0<<4)
+#define S3C2410_IISMOD_MSB (1<<4)
+#define S3C2410_IISMOD_8BIT (0<<3)
+#define S3C2410_IISMOD_16BIT (1<<3)
+#define S3C2410_IISMOD_BITMASK (1<<3)
+#define S3C2410_IISMOD_256FS (0<<1)
+#define S3C2410_IISMOD_384FS (1<<1)
+#define S3C2410_IISMOD_16FS (0<<0)
+#define S3C2410_IISMOD_32FS (1<<0)
+#define S3C2410_IISMOD_48FS (2<<0)
+
+#define S3C2410_IISPSR (0x08)
+#define S3C2410_IISPSR_INTMASK (31<<5)
+#define S3C2410_IISPSR_INTSHIFT (5)
+#define S3C2410_IISPSR_EXTMASK (31<<0)
+#define S3C2410_IISPSR_EXTSHFIT (0)
+
+#define S3C2410_IISFCON (0x0c)
+
+#define S3C2410_IISFCON_TXDMA (1<<15)
+#define S3C2410_IISFCON_RXDMA (1<<14)
+#define S3C2410_IISFCON_TXENABLE (1<<13)
+#define S3C2410_IISFCON_RXENABLE (1<<12)
+#define S3C2410_IISFCON_TXMASK (0x3f << 6)
+#define S3C2410_IISFCON_TXSHIFT (6)
+#define S3C2410_IISFCON_RXMASK (0x3f)
+#define S3C2410_IISFCON_RXSHIFT (0)
+
+#define S3C2410_IISFIFO (0x10)
+#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h
new file mode 100644
index 0000000..24b7292
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-irq.h
@@ -0,0 +1,44 @@
+/* linux/include/asm/arch-s3c2410/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *
+ * Changelog:
+ * 19-06-2003 BJD Created file
+ * 12-03-2004 BJD Updated include protection
+ * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+ */
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO)
+
+#define S3C2410_SRCPND S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h
new file mode 100644
index 0000000..7f882ea
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-lcd.h
@@ -0,0 +1,114 @@
+/* linux/include/asm/arch-s3c2410/regs-lcd.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *
+ * Changelog:
+ * 12-06-2003 BJD Created file
+ * 26-06-2003 BJD Updated LCDCON register definitions
+ * 12-03-2004 BJD Updated include protection
+ * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+
+#define S3C2410_LCDREG(x) ((x) + S3C24XX_VA_LCD)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8)
+#define S3C2410_LCDCON1_MMODE (1<<7)
+#define S3C2410_LCDCON1_DSCAN4 (0<<5)
+#define S3C2410_LCDCON1_STN4 (1<<5)
+#define S3C2410_LCDCON1_STN8 (2<<5)
+#define S3C2410_LCDCON1_TFT (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP (0<<1)
+#define S3C2410_LCDCON1_STN2GREY (1<<1)
+#define S3C2410_LCDCON1_STN4GREY (2<<1)
+#define S3C2410_LCDCON1_STN8BPP (3<<1)
+#define S3C2410_LCDCON1_STN12BPP (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP (13<<1)
+
+#define S3C2410_LCDCON1_ENVID (1)
+
+#define S3C2410_LCDCON2_VBPD(x) ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x) ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x) ((x) << 0)
+
+#define S3C2410_LCDCON3_HBPD(x) ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x) ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x) ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON4_MVAL(x) ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x) ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x) ((x) << 0)
+
+#define S3C2410_LCDCON5_BPP24BL (1<<12)
+#define S3C2410_LCDCON5_FRM565 (1<<11)
+#define S3C2410_LCDCON5_INVVCLK (1<<10)
+#define S3C2410_LCDCON5_INVVLINE (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME (1<<8)
+#define S3C2410_LCDCON5_INVVD (1<<7)
+#define S3C2410_LCDCON5_INVVDEN (1<<6)
+#define S3C2410_LCDCON5_INVPWREN (1<<5)
+#define S3C2410_LCDCON5_INVLEND (1<<4)
+#define S3C2410_LCDCON5_PWREN (1<<3)
+#define S3C2410_LCDCON5_ENLEND (1<<2)
+#define S3C2410_LCDCON5_BSWP (1<<1)
+#define S3C2410_LCDCON5_HWSWP (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x) ((x) << 21)
+#define S3C2410_LCDBASEU(x) (x)
+
+#define S3C2410_OFFSIZE(x) ((x) << 11)
+#define S3C2410_PAGEWIDTH(x) (x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL S3C2410_LCDREG(0x50)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C)
+#define S3C2410_LPCSEL S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4))
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
+
+
+
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
new file mode 100644
index 0000000..1a1328a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-mem.h
@@ -0,0 +1,212 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-mem.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+ *
+ * Changelog:
+ * 29-Sep-2004 BJD Initial include for Linux
+ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+ *
+*/
+
+#ifndef __ASM_ARM_MEMREGS_H
+#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+
+#ifndef S3C2410_MEMREG
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+/* bus width, and wait state control */
+#define S3C2410_BWSCON S3C2410_MEMREG(0x0000)
+
+/* bank zero config - note, pinstrapped from OM pins! */
+#define S3C2410_BWSCON_DW0_16 (1<<1)
+#define S3C2410_BWSCON_DW0_32 (2<<1)
+
+/* bank one configs */
+#define S3C2410_BWSCON_DW1_8 (0<<4)
+#define S3C2410_BWSCON_DW1_16 (1<<4)
+#define S3C2410_BWSCON_DW1_32 (2<<4)
+#define S3C2410_BWSCON_WS1 (1<<6)
+#define S3C2410_BWSCON_ST1 (1<<7)
+
+/* bank 2 configurations */
+#define S3C2410_BWSCON_DW2_8 (0<<8)
+#define S3C2410_BWSCON_DW2_16 (1<<8)
+#define S3C2410_BWSCON_DW2_32 (2<<8)
+#define S3C2410_BWSCON_WS2 (1<<10)
+#define S3C2410_BWSCON_ST2 (1<<11)
+
+/* bank 3 configurations */
+#define S3C2410_BWSCON_DW3_8 (0<<12)
+#define S3C2410_BWSCON_DW3_16 (1<<12)
+#define S3C2410_BWSCON_DW3_32 (2<<12)
+#define S3C2410_BWSCON_WS3 (1<<14)
+#define S3C2410_BWSCON_ST3 (1<<15)
+
+/* bank 4 configurations */
+#define S3C2410_BWSCON_DW4_8 (0<<16)
+#define S3C2410_BWSCON_DW4_16 (1<<16)
+#define S3C2410_BWSCON_DW4_32 (2<<16)
+#define S3C2410_BWSCON_WS4 (1<<18)
+#define S3C2410_BWSCON_ST4 (1<<19)
+
+/* bank 5 configurations */
+#define S3C2410_BWSCON_DW5_8 (0<<20)
+#define S3C2410_BWSCON_DW5_16 (1<<20)
+#define S3C2410_BWSCON_DW5_32 (2<<20)
+#define S3C2410_BWSCON_WS5 (1<<22)
+#define S3C2410_BWSCON_ST5 (1<<23)
+
+/* bank 6 configurations */
+#define S3C2410_BWSCON_DW6_8 (0<<24)
+#define S3C2410_BWSCON_DW6_16 (1<<24)
+#define S3C2410_BWSCON_DW6_32 (2<<24)
+#define S3C2410_BWSCON_WS6 (1<<26)
+#define S3C2410_BWSCON_ST6 (1<<27)
+
+/* bank 7 configurations */
+#define S3C2410_BWSCON_DW7_8 (0<<28)
+#define S3C2410_BWSCON_DW7_16 (1<<28)
+#define S3C2410_BWSCON_DW7_32 (2<<28)
+#define S3C2410_BWSCON_WS7 (1<<30)
+#define S3C2410_BWSCON_ST7 (1<<31)
+
+/* memory set (rom, ram) */
+#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
+#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
+#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C)
+#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010)
+#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014)
+#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018)
+#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C)
+#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020)
+
+/* bank configuration registers */
+
+#define S3C2410_BANKCON_PMCnorm (0x00)
+#define S3C2410_BANKCON_PMC4 (0x01)
+#define S3C2410_BANKCON_PMC8 (0x02)
+#define S3C2410_BANKCON_PMC16 (0x03)
+
+/* bank configurations for banks 0..7, note banks
+ * 6 and 7 have differnt configurations depending on
+ * the memory type bits */
+
+#define S3C2410_BANKCON_Tacp2 (0x0 << 2)
+#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
+#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
+#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
+
+#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
+#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
+#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
+#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
+
+#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
+#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
+#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
+#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
+
+#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
+#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
+#define S3C2410_BANKCON_Tacc3 (0x2 << 8)
+#define S3C2410_BANKCON_Tacc4 (0x3 << 8)
+#define S3C2410_BANKCON_Tacc6 (0x4 << 8)
+#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
+#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
+#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
+
+#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
+#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
+#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
+#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
+
+#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
+#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
+#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
+#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
+
+#define S3C2410_BANKCON_SRAM (0x0 << 15)
+#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
+#define S3C2410_BANKCON_SDRAM (0x3 << 15)
+
+/* next bits only for EDO DRAM in 6,7 */
+#define S3C2400_BANKCON_EDO_Trdc1 (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trdc2 (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trdc3 (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trdc4 (0x03 << 4)
+
+/* CAS pulse width */
+#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3)
+#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3)
+
+/* CAS pre-charge */
+#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2)
+#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2)
+
+/* control column address select */
+#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0)
+#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0)
+#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0)
+#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0)
+
+/* next bits only for SDRAM in 6,7 */
+#define S3C2410_BANKCON_Trdc2 (0x00 << 2)
+#define S3C2410_BANKCON_Trdc3 (0x01 << 2)
+#define S3C2410_BANKCON_Trdc4 (0x02 << 2)
+
+/* control column address select */
+#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
+#define S3C2410_BANKCON_SCANb9 (0x01 << 0)
+#define S3C2410_BANKCON_SCANb10 (0x02 << 0)
+
+#define S3C2410_REFRESH S3C2410_MEMREG(0x0024)
+#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028)
+#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C)
+#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030)
+
+/* refresh control */
+
+#define S3C2410_REFRESH_REFEN (1<<23)
+#define S3C2410_REFRESH_SELF (1<<22)
+#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1)
+
+#define S3C2410_REFRESH_TRP_MASK (3<<20)
+#define S3C2410_REFRESH_TRP_2clk (0<<20)
+#define S3C2410_REFRESH_TRP_3clk (1<<20)
+#define S3C2410_REFRESH_TRP_4clk (2<<20)
+
+#define S3C2410_REFRESH_TSRC_MASK (3<<18)
+#define S3C2410_REFRESH_TSRC_4clk (0<<18)
+#define S3C2410_REFRESH_TSRC_5clk (1<<18)
+#define S3C2410_REFRESH_TSRC_6clk (2<<18)
+#define S3C2410_REFRESH_TSRC_7clk (3<<18)
+
+
+/* mode select register(s) */
+
+#define S3C2410_MRSRB_CL1 (0x00 << 4)
+#define S3C2410_MRSRB_CL2 (0x02 << 4)
+#define S3C2410_MRSRB_CL3 (0x03 << 4)
+
+/* bank size register */
+#define S3C2410_BANKSIZE_128M (0x2 << 0)
+#define S3C2410_BANKSIZE_64M (0x1 << 0)
+#define S3C2410_BANKSIZE_32M (0x0 << 0)
+#define S3C2410_BANKSIZE_16M (0x7 << 0)
+#define S3C2410_BANKSIZE_8M (0x6 << 0)
+#define S3C2410_BANKSIZE_4M (0x5 << 0)
+#define S3C2410_BANKSIZE_2M (0x4 << 0)
+#define S3C2410_BANKSIZE_MASK (0x7 << 0)
+#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
+#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
+#define S3C2410_BANKSIZE_BURST (1<<7)
+
+#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-nand.h b/include/asm-arm/arch-s3c2410/regs-nand.h
new file mode 100644
index 0000000..c443ac8
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-nand.h
@@ -0,0 +1,43 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+ *
+ * Changelog:
+ * 18-Aug-2004 BJD Copied file from 2.4 and updated
+*/
+
+#ifndef __ASM_ARM_REGS_NAND
+#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $"
+
+
+#define S3C2410_NFREG(x) (x)
+
+#define S3C2410_NFCONF S3C2410_NFREG(0x00)
+#define S3C2410_NFCMD S3C2410_NFREG(0x04)
+#define S3C2410_NFADDR S3C2410_NFREG(0x08)
+#define S3C2410_NFDATA S3C2410_NFREG(0x0C)
+#define S3C2410_NFSTAT S3C2410_NFREG(0x10)
+#define S3C2410_NFECC S3C2410_NFREG(0x14)
+
+#define S3C2410_NFCONF_EN (1<<15)
+#define S3C2410_NFCONF_512BYTE (1<<14)
+#define S3C2410_NFCONF_4STEP (1<<13)
+#define S3C2410_NFCONF_INITECC (1<<12)
+#define S3C2410_NFCONF_nFCE (1<<11)
+#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
+
+#define S3C2410_NFSTAT_BUSY (1<<0)
+
+/* think ECC can only be 8bit read? */
+
+#endif /* __ASM_ARM_REGS_NAND */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h
new file mode 100644
index 0000000..228983f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-rtc.h
@@ -0,0 +1,66 @@
+/* linux/include/asm/arch-s3c2410/regs-rtc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Internal RTC register definition
+ *
+ * Changelog:
+ * 19-06-2003 BJD Created file
+ * 12-03-2004 BJD Updated include protection
+ * 15-01-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
+*/
+
+#ifndef __ASM_ARCH_REGS_RTC_H
+#define __ASM_ARCH_REGS_RTC_H __FILE__
+
+#define S3C2410_RTCREG(x) ((x) + S3C24XX_VA_RTC)
+
+#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
+#define S3C2410_RTCCON_RTCEN (1<<0)
+#define S3C2410_RTCCON_CLKSEL (1<<1)
+#define S3C2410_RTCCON_CNTSEL (1<<2)
+#define S3C2410_RTCCON_CLKRST (1<<3)
+
+#define S3C2410_TICNT S3C2410_RTCREG(0x44)
+#define S3C2410_TICNT_ENABLE (1<<7)
+
+#define S3C2410_RTCALM S3C2410_RTCREG(0x50)
+#define S3C2410_RTCALM_ALMEN (1<<6)
+#define S3C2410_RTCALM_YEAREN (1<<5)
+#define S3C2410_RTCALM_MONEN (1<<4)
+#define S3C2410_RTCALM_DAYEN (1<<3)
+#define S3C2410_RTCALM_HOUREN (1<<2)
+#define S3C2410_RTCALM_MINEN (1<<1)
+#define S3C2410_RTCALM_SECEN (1<<0)
+
+#define S3C2410_RTCALM_ALL \
+ S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
+ S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
+ S3C2410_RTCALM_SECEN
+
+
+#define S3C2410_ALMSEC S3C2410_RTCREG(0x54)
+#define S3C2410_ALMMIN S3C2410_RTCREG(0x58)
+#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c)
+
+#define S3C2410_ALMDATE S3C2410_RTCREG(0x60)
+#define S3C2410_ALMMON S3C2410_RTCREG(0x64)
+#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68)
+
+#define S3C2410_RTCRST S3C2410_RTCREG(0x6c)
+
+#define S3C2410_RTCSEC S3C2410_RTCREG(0x70)
+#define S3C2410_RTCMIN S3C2410_RTCREG(0x74)
+#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78)
+#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c)
+#define S3C2410_RTCDAY S3C2410_RTCREG(0x80)
+#define S3C2410_RTCMON S3C2410_RTCREG(0x84)
+#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88)
+
+
+#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h
new file mode 100644
index 0000000..ca9a26f
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-sdi.h
@@ -0,0 +1,118 @@
+/* linux/include/asm/arch-s3c2410/regs-sdi.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 MMC/SDIO register definitions
+ *
+ * Changelog:
+ * 18-Aug-2004 Ben Dooks Created initial file
+ * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates
+ * 29-Nov-2004 Ben Dooks Updated Koen's patch
+*/
+
+#ifndef __ASM_ARM_REGS_SDI
+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
+
+#define S3C2410_SDICON (0x00)
+#define S3C2410_SDIPRE (0x04)
+#define S3C2410_SDICMDARG (0x08)
+#define S3C2410_SDICMDCON (0x0C)
+#define S3C2410_SDICMDSTAT (0x10)
+#define S3C2410_SDIRSP0 (0x14)
+#define S3C2410_SDIRSP1 (0x18)
+#define S3C2410_SDIRSP2 (0x1C)
+#define S3C2410_SDIRSP3 (0x20)
+#define S3C2410_SDITIMER (0x24)
+#define S3C2410_SDIBSIZE (0x28)
+#define S3C2410_SDIDCON (0x2C)
+#define S3C2410_SDIDCNT (0x30)
+#define S3C2410_SDIDSTA (0x34)
+#define S3C2410_SDIFSTA (0x38)
+#define S3C2410_SDIDATA (0x3C)
+#define S3C2410_SDIIMSK (0x40)
+
+#define S3C2410_SDICON_BYTEORDER (1<<4)
+#define S3C2410_SDICON_SDIOIRQ (1<<3)
+#define S3C2410_SDICON_RWAITEN (1<<2)
+#define S3C2410_SDICON_FIFORESET (1<<1)
+#define S3C2410_SDICON_CLOCKTYPE (1<<0)
+
+#define S3C2410_SDICMDCON_ABORT (1<<12)
+#define S3C2410_SDICMDCON_WITHDATA (1<<11)
+#define S3C2410_SDICMDCON_LONGRSP (1<<10)
+#define S3C2410_SDICMDCON_WAITRSP (1<<9)
+#define S3C2410_SDICMDCON_CMDSTART (1<<8)
+#define S3C2410_SDICMDCON_INDEX (0xff)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
+#define S3C2410_SDICMDSTAT_XFERING (1<<8)
+#define S3C2410_SDICMDSTAT_INDEX (0xff)
+
+#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
+#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
+#define S3C2410_SDIDCON_WIDEBUS (1<<16)
+#define S3C2410_SDIDCON_DMAEN (1<<15)
+#define S3C2410_SDIDCON_STOP (1<<14)
+#define S3C2410_SDIDCON_DATMODE (3<<12)
+#define S3C2410_SDIDCON_BLKNUM (0x7ff)
+
+/* constants for S3C2410_SDIDCON_DATMODE */
+#define S3C2410_SDIDCON_XFER_READY (0<<12)
+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
+
+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
+
+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
+#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
+#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
+#define S3C2410_SDIDSTA_TXDATAON (1<<1)
+#define S3C2410_SDIDSTA_RXDATAON (1<<0)
+
+#define S3C2410_SDIFSTA_TFDET (1<<13)
+#define S3C2410_SDIFSTA_RFDET (1<<12)
+#define S3C2410_SDIFSTA_TXHALF (1<<11)
+#define S3C2410_SDIFSTA_TXEMPTY (1<<10)
+#define S3C2410_SDIFSTA_RFLAST (1<<9)
+#define S3C2410_SDIFSTA_RFFULL (1<<8)
+#define S3C2410_SDIFSTA_RFHALF (1<<7)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
+#define S3C2410_SDIIMSK_CMDSENT (1<<16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
+#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
+#define S3C2410_SDIIMSK_READWAIT (1<<13)
+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
+#define S3C2410_SDIIMSK_DATACRC (1<<9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
+#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
+
+#endif /* __ASM_ARM_REGS_SDI */
diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
new file mode 100644
index 0000000..ce1bbba
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -0,0 +1,209 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-serial.h
+ *
+ * From linux/include/asm-arm/hardware/serial_s3c2410.h
+ *
+ * Internal header file for Samsung S3C2410 serial ports (UART0-2)
+ *
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *
+ * Adapted from:
+ *
+ * Internal header file for MX1ADS serial ports (UART1 & 2)
+ *
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Modifications:
+ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define S3C24XX_VA_UART0 (S3C24XX_VA_UART)
+#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 )
+#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 )
+
+#define S3C2410_PA_UART0 (S3C2410_PA_UART)
+#define S3C2410_PA_UART1 (S3C2410_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2 (S3C2410_PA_UART + 0x8000 )
+
+#define S3C2410_URXH (0x24)
+#define S3C2410_UTXH (0x20)
+#define S3C2410_ULCON (0x00)
+#define S3C2410_UCON (0x04)
+#define S3C2410_UFCON (0x08)
+#define S3C2410_UMCON (0x0C)
+#define S3C2410_UBRDIV (0x28)
+#define S3C2410_UTRSTAT (0x10)
+#define S3C2410_UERSTAT (0x14)
+#define S3C2410_UFSTAT (0x18)
+#define S3C2410_UMSTAT (0x1C)
+
+#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3))
+
+#define S3C2410_LCON_CS5 (0x0)
+#define S3C2410_LCON_CS6 (0x1)
+#define S3C2410_LCON_CS7 (0x2)
+#define S3C2410_LCON_CS8 (0x3)
+#define S3C2410_LCON_CSMASK (0x3)
+
+#define S3C2410_LCON_PNONE (0x0)
+#define S3C2410_LCON_PEVEN (0x5 << 3)
+#define S3C2410_LCON_PODD (0x4 << 3)
+#define S3C2410_LCON_PMASK (0x7 << 3)
+
+#define S3C2410_LCON_STOPB (1<<2)
+#define S3C2410_LCON_IRM (1<<6)
+
+#define S3C2440_UCON_CLKMASK (3<<10)
+#define S3C2440_UCON_PCLK (0<<10)
+#define S3C2440_UCON_UCLK (1<<10)
+#define S3C2440_UCON_PCLK2 (2<<10)
+#define S3C2440_UCON_FCLK (3<<10)
+#define S3C2440_UCON2_FCLK_EN (1<<15)
+#define S3C2440_UCON0_DIVMASK (15 << 12)
+#define S3C2440_UCON1_DIVMASK (15 << 12)
+#define S3C2440_UCON2_DIVMASK (7 << 12)
+#define S3C2440_UCON_DIVSHIFT (12)
+
+#define S3C2410_UCON_UCLK (1<<10)
+#define S3C2410_UCON_SBREAK (1<<4)
+
+#define S3C2410_UCON_TXILEVEL (1<<9)
+#define S3C2410_UCON_RXILEVEL (1<<8)
+#define S3C2410_UCON_TXIRQMODE (1<<2)
+#define S3C2410_UCON_RXIRQMODE (1<<0)
+#define S3C2410_UCON_RXFIFO_TOI (1<<7)
+
+#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI)
+
+#define S3C2410_UFCON_FIFOMODE (1<<0)
+#define S3C2410_UFCON_TXTRIG0 (0<<6)
+#define S3C2410_UFCON_RXTRIG8 (1<<4)
+#define S3C2410_UFCON_RXTRIG12 (2<<4)
+
+/* S3C2440 FIFO trigger levels */
+#define S3C2440_UFCON_RXTRIG1 (0<<4)
+#define S3C2440_UFCON_RXTRIG8 (1<<4)
+#define S3C2440_UFCON_RXTRIG16 (2<<4)
+#define S3C2440_UFCON_RXTRIG32 (3<<4)
+
+#define S3C2440_UFCON_TXTRIG0 (0<<6)
+#define S3C2440_UFCON_TXTRIG16 (1<<6)
+#define S3C2440_UFCON_TXTRIG32 (2<<6)
+#define S3C2440_UFCON_TXTRIG48 (3<<6)
+
+#define S3C2410_UFCON_RESETBOTH (3<<1)
+#define S3C2410_UFCON_RESETTX (1<<2)
+#define S3C2410_UFCON_RESETRX (1<<1)
+
+#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S3C2410_UFCON_TXTRIG0 | \
+ S3C2410_UFCON_RXTRIG8 )
+
+#define S3C2410_UMCOM_AFC (1<<4)
+#define S3C2410_UMCOM_RTS_LOW (1<<0)
+
+#define S3C2410_UFSTAT_TXFULL (1<<9)
+#define S3C2410_UFSTAT_RXFULL (1<<8)
+#define S3C2410_UFSTAT_TXMASK (15<<4)
+#define S3C2410_UFSTAT_TXSHIFT (4)
+#define S3C2410_UFSTAT_RXMASK (15<<0)
+#define S3C2410_UFSTAT_RXSHIFT (0)
+
+#define S3C2440_UFSTAT_TXFULL (1<<14)
+#define S3C2440_UFSTAT_RXFULL (1<<6)
+#define S3C2440_UFSTAT_TXSHIFT (8)
+#define S3C2440_UFSTAT_RXSHIFT (0)
+#define S3C2440_UFSTAT_TXMASK (63<<8)
+#define S3C2440_UFSTAT_RXMASK (63)
+
+#define S3C2410_UTRSTAT_TXE (1<<2)
+#define S3C2410_UTRSTAT_TXFE (1<<1)
+#define S3C2410_UTRSTAT_RXDR (1<<0)
+
+#define S3C2410_UERSTAT_OVERRUN (1<<0)
+#define S3C2410_UERSTAT_FRAME (1<<2)
+#define S3C2410_UERSTAT_BREAK (1<<3)
+#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \
+ S3C2410_UERSTAT_FRAME | \
+ S3C2410_UERSTAT_BREAK)
+
+#define S3C2410_UMSTAT_CTS (1<<0)
+#define S3C2410_UMSTAT_DeltaCTS (1<<2)
+
+#ifndef __ASSEMBLY__
+
+/* struct s3c24xx_uart_clksrc
+ *
+ * this structure defines a named clock source that can be used for the
+ * uart, so that the best clock can be selected for the requested baud
+ * rate.
+ *
+ * min_baud and max_baud define the range of baud-rates this clock is
+ * acceptable for, if they are both zero, it is assumed any baud rate that
+ * can be generated from this clock will be used.
+ *
+ * divisor gives the divisor from the clock to the one seen by the uart
+*/
+
+struct s3c24xx_uart_clksrc {
+ const char *name;
+ unsigned int divisor;
+ unsigned int min_baud;
+ unsigned int max_baud;
+};
+
+/* configuration structure for per-machine configurations for the
+ * serial port
+ *
+ * the pointer is setup by the machine specific initialisation from the
+ * arch/arm/mach-s3c2410/ directory.
+*/
+
+struct s3c2410_uartcfg {
+ unsigned char hwport; /* hardware port number */
+ unsigned char unused;
+ unsigned short flags;
+ unsigned long uart_flags; /* default uart flags */
+
+ unsigned long ucon; /* value of ucon for port */
+ unsigned long ulcon; /* value of ulcon for port */
+ unsigned long ufcon; /* value of ufcon for port */
+
+ struct s3c24xx_uart_clksrc *clocks;
+ unsigned int clocks_size;
+};
+
+/* s3c24xx_uart_devs
+ *
+ * this is exported from the core as we cannot use driver_register(),
+ * or platform_add_device() before the console_initcall()
+*/
+
+extern struct platform_device *s3c24xx_uart_devs[3];
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-spi.h b/include/asm-arm/arch-s3c2410/regs-spi.h
new file mode 100644
index 0000000..cb502a8
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-spi.h
@@ -0,0 +1,56 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-spi.h
+ *
+ * Copyright (c) 2004 Fetron GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 SPI register definition
+ *
+ * Changelog:
+ * 20-04-2004 KF Created file
+ * 04-10-2004 BJD Removed VA address (no longer mapped)
+ * tidied file for submission
+ */
+
+#ifndef __ASM_ARCH_REGS_SPI_H
+#define __ASM_ARCH_REGS_SPI_H
+
+
+#define S3C2410_SPCON (0x00)
+
+#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */
+#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */
+#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */
+#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */
+#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select
+ 0: slave, 1: master */
+#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */
+#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */
+
+#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */
+#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */
+
+#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */
+
+
+#define S3C2410_SPSTA (0x04)
+
+#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */
+#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */
+#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */
+
+
+#define S3C2410_SPPIN (0x08)
+
+#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */
+#define S3C2410_SPPIN_RESERVED (1<<1)
+#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */
+
+
+#define S3C2410_SPPRE (0x0C)
+#define S3C2410_SPTDAT (0x10)
+#define S3C2410_SPRDAT (0x14)
+
+#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-timer.h b/include/asm-arm/arch-s3c2410/regs-timer.h
new file mode 100644
index 0000000..169064e
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-timer.h
@@ -0,0 +1,113 @@
+/* linux/include/asm/arch-s3c2410/regs-timer.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Timer configuration
+ *
+ * Changelog:
+ * 05-06-2003 BJD Created file
+ * 26-06-2003 BJD Added more timer definitions to mux / control
+ * 12-03-2004 BJD Updated include protection
+ * 10-02-2005 BJD Added S3C2410_TCFG1_MUX4_SHIFT (Guillaume Gourat)
+ * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+*/
+
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $"
+
+#define S3C2410_TIMERREG(x) (S3C24XX_VA_TIMER + (x))
+#define S3C2410_TIMERREG2(tmr,reg) S3C2410_TIMERREG((reg)+0x0c+((tmr)*0x0c))
+
+#define S3C2410_TCFG0 S3C2410_TIMERREG(0x00)
+#define S3C2410_TCFG1 S3C2410_TIMERREG(0x04)
+#define S3C2410_TCON S3C2410_TIMERREG(0x08)
+
+#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
+#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
+#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
+#define S3C2410_TCFG_DEADZONE_MASK (255<<16)
+#define S3C2410_TCFG_DEADZONE_SHIFT (16)
+
+#define S3C2410_TCFG1_MUX4_DIV2 (0<<16)
+#define S3C2410_TCFG1_MUX4_DIV4 (1<<16)
+#define S3C2410_TCFG1_MUX4_DIV8 (2<<16)
+#define S3C2410_TCFG1_MUX4_DIV16 (3<<16)
+#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16)
+#define S3C2410_TCFG1_MUX4_MASK (15<<16)
+#define S3C2410_TCFG1_MUX4_SHIFT (16)
+
+#define S3C2410_TCFG1_MUX3_DIV2 (0<<12)
+#define S3C2410_TCFG1_MUX3_DIV4 (1<<12)
+#define S3C2410_TCFG1_MUX3_DIV8 (2<<12)
+#define S3C2410_TCFG1_MUX3_DIV16 (3<<12)
+#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12)
+#define S3C2410_TCFG1_MUX3_MASK (15<<12)
+
+
+#define S3C2410_TCFG1_MUX2_DIV2 (0<<8)
+#define S3C2410_TCFG1_MUX2_DIV4 (1<<8)
+#define S3C2410_TCFG1_MUX2_DIV8 (2<<8)
+#define S3C2410_TCFG1_MUX2_DIV16 (3<<8)
+#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8)
+#define S3C2410_TCFG1_MUX2_MASK (15<<8)
+
+
+#define S3C2410_TCFG1_MUX1_DIV2 (0<<4)
+#define S3C2410_TCFG1_MUX1_DIV4 (1<<4)
+#define S3C2410_TCFG1_MUX1_DIV8 (2<<4)
+#define S3C2410_TCFG1_MUX1_DIV16 (3<<4)
+#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4)
+#define S3C2410_TCFG1_MUX1_MASK (15<<4)
+
+#define S3C2410_TCFG1_MUX0_DIV2 (0<<0)
+#define S3C2410_TCFG1_MUX0_DIV4 (1<<0)
+#define S3C2410_TCFG1_MUX0_DIV8 (2<<0)
+#define S3C2410_TCFG1_MUX0_DIV16 (3<<0)
+#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0)
+#define S3C2410_TCFG1_MUX0_MASK (15<<0)
+
+/* for each timer, we have an count buffer, an compare buffer and
+ * an observation buffer
+*/
+
+/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
+
+#define S3C2410_TCNTB(tmr) S3C2410_TIMERREG2(tmr, 0x00)
+#define S3C2410_TCMPB(tmr) S3C2410_TIMERREG2(tmr, 0x04)
+#define S3C2410_TCNTO(tmr) S3C2410_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
+
+#define S3C2410_TCON_T4RELOAD (1<<22)
+#define S3C2410_TCON_T4MANUALUPD (1<<21)
+#define S3C2410_TCON_T4START (1<<20)
+
+#define S3C2410_TCON_T3RELOAD (1<<19)
+#define S3C2410_TCON_T3INVERT (1<<18)
+#define S3C2410_TCON_T3MANUALUPD (1<<17)
+#define S3C2410_TCON_T3START (1<<16)
+
+#define S3C2410_TCON_T2RELOAD (1<<15)
+#define S3C2410_TCON_T2INVERT (1<<14)
+#define S3C2410_TCON_T2MANUALUPD (1<<13)
+#define S3C2410_TCON_T2START (1<<12)
+
+#define S3C2410_TCON_T1RELOAD (1<<11)
+#define S3C2410_TCON_T1INVERT (1<<10)
+#define S3C2410_TCON_T1MANUALUPD (1<<9)
+#define S3C2410_TCON_T1START (1<<8)
+
+#define S3C2410_TCON_T0DEADZONE (1<<4)
+#define S3C2410_TCON_T0RELOAD (1<<3)
+#define S3C2410_TCON_T0INVERT (1<<2)
+#define S3C2410_TCON_T0MANUALUPD (1<<1)
+#define S3C2410_TCON_T0START (1<<0)
+
+#endif /* __ASM_ARCH_REGS_TIMER_H */
+
+
+
diff --git a/include/asm-arm/arch-s3c2410/regs-udc.h b/include/asm-arm/arch-s3c2410/regs-udc.h
new file mode 100644
index 0000000..bf315b7
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-udc.h
@@ -0,0 +1,164 @@
+/* linux/include/asm/arch-s3c2410/regs-udc.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Changelog:
+ * 01-08-2004 Initial creation
+ * 12-09-2004 Cleanup for submission
+ * 24-10-2004 Fixed S3C2410_UDC_MAXP_REG definition
+ * 10-03-2005 Changed S3C2410_VA to S3C24XX_VA
+ */
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+
+#define S3C2410_USBDREG(x) ((x) + S3C24XX_VA_USBDEV)
+
+#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c)
+
+
+
+#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W
+#define S3C2410_UDC_PWR_RESET (1<<3) // R
+#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W
+#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R
+#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W
+
+#define S3C2410_UDC_PWR_DEFAULT 0x00
+
+#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only)
+#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only)
+#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only)
+#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only)
+#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only)
+#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only)
+#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W
+#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W
+#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W
+#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W
+#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W
+
+#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W
+#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W
+
+
+#define S3C2410_UDC_INDEX_EP0 (0x00)
+#define S3C2410_UDC_INDEX_EP1 (0x01) // ??
+#define S3C2410_UDC_INDEX_EP2 (0x02) // ??
+#define S3C2410_UDC_INDEX_EP3 (0x03) // ??
+#define S3C2410_UDC_INDEX_EP4 (0x04) // ??
+
+#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W
+#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only)
+#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W
+#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only)
+#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only)
+#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only)
+
+#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W
+#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W
+#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W
+#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W
+
+#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W
+#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only)
+#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W
+#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W
+#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R
+#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only)
+#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W
+#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W
+#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W
+
+#define S3C2410_UDC_SETIX(x) \
+ __raw_writel(S3C2410_UDC_INDEX_ ## x, S3C2410_UDC_INDEX_REG);
+
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2)
+#define S3C2410_UDC_EP0_CSR_DE (1<<3)
+#define S3C2410_UDC_EP0_CSR_SE (1<<4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6)
+#define S3C2410_UDC_EP0_CSR_SSE (1<<7)
+
+#define S3C2410_UDC_MAXP_8 (1<<0)
+#define S3C2410_UDC_MAXP_16 (1<<1)
+#define S3C2410_UDC_MAXP_32 (1<<2)
+#define S3C2410_UDC_MAXP_64 (1<<3)
+
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/regs-watchdog.h b/include/asm-arm/arch-s3c2410/regs-watchdog.h
new file mode 100644
index 0000000..d199ca6
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-watchdog.h
@@ -0,0 +1,46 @@
+/* linux/include/asm/arch-s3c2410/regs0watchdog.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Watchdog timer control
+ *
+ * Changelog:
+ * 21-06-2003 BJD Created file
+ * 12-03-2004 BJD Updated include protection
+ * 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
+*/
+
+
+#ifndef __ASM_ARCH_REGS_WATCHDOG_H
+#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $"
+
+#define S3C2410_WDOGREG(x) ((x) + S3C24XX_VA_WATCHDOG)
+
+#define S3C2410_WTCON S3C2410_WDOGREG(0x00)
+#define S3C2410_WTDAT S3C2410_WDOGREG(0x04)
+#define S3C2410_WTCNT S3C2410_WDOGREG(0x08)
+
+/* the watchdog can either generate a reset pulse, or an
+ * interrupt.
+ */
+
+#define S3C2410_WTCON_RSTEN (0x01)
+#define S3C2410_WTCON_INTEN (1<<2)
+#define S3C2410_WTCON_ENABLE (1<<5)
+
+#define S3C2410_WTCON_DIV16 (0<<3)
+#define S3C2410_WTCON_DIV32 (1<<3)
+#define S3C2410_WTCON_DIV64 (2<<3)
+#define S3C2410_WTCON_DIV128 (3<<3)
+
+#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
+#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
+
+#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
+
+
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
new file mode 100644
index 0000000..9b0d850
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -0,0 +1,90 @@
+/* linux/include/asm-arm/arch-s3c2410/system.h
+ *
+ * (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 12-May-2003 BJD Created file
+ * 14-May-2003 BJD Removed idle to aid debugging
+ * 12-Jun-2003 BJD Added reset via watchdog
+ * 04-Sep-2003 BJD Moved to v2.6
+ * 28-Oct-2004 BJD Added over-ride for idle, and fixed reset panic()
+ */
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/idle.h>
+
+#include <asm/arch/regs-watchdog.h>
+#include <asm/arch/regs-clock.h>
+
+void (*s3c24xx_idle)(void);
+
+void s3c24xx_default_idle(void)
+{
+ void __iomem *reg = S3C2410_CLKCON;
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(reg) | (1<<2), reg);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++) {
+ tmp += __raw_readl(reg); /* ensure loop not optimised out */
+ }
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(reg) & ~(1<<2), reg);
+}
+
+static void arch_idle(void)
+{
+ if (s3c24xx_idle != NULL)
+ (s3c24xx_idle)();
+ else
+ s3c24xx_default_idle();
+}
+
+
+static void
+arch_reset(char mode)
+{
+ if (mode == 's') {
+ cpu_reset(0);
+ }
+
+ printk("arch_reset: attempting watchdog reset\n");
+
+ __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
+
+ /* put initial values into count and data */
+ __raw_writel(0x100, S3C2410_WTCNT);
+ __raw_writel(0x100, S3C2410_WTDAT);
+
+ /* set the watchdog to go and reset... */
+ __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+ S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+
+ /* wait for reset to assert... */
+ mdelay(5000);
+
+ printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+ /* we'll take a jump through zero as a poor second */
+ cpu_reset(0);
+}
diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h
new file mode 100644
index 0000000..3558a3a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/timex.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/arch-s3c2410/timex.h
+ *
+ * (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 02-Sep-2003 BJD Created file
+ * 05-Jan-2004 BJD Updated for Linux 2.6.0
+ * 22-Nov-2004 BJD Fixed CLOCK_TICK_RATE
+ * 10-Jan-2004 BJD Removed s3c2410_clock_tick_rate
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+
+#define CLOCK_TICK_RATE 12000000
+
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
new file mode 100644
index 0000000..ad4252e
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/uncompress.h
@@ -0,0 +1,158 @@
+/* linux/include/asm-arm/arch-s3c2410/uncompress.h
+ *
+ * (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 22-May-2003 BJD Created
+ * 08-Sep-2003 BJD Moved to linux v2.6
+ * 12-Mar-2004 BJD Updated header protection
+ * 12-Oct-2004 BJD Take account of debug uart configuration
+ * 15-Nov-2004 BJD Fixed uart configuration
+ * 22-Feb-2005 BJD Added watchdog to uncompress
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <linux/config.h>
+
+/* defines for UART registers */
+#include "asm/arch/regs-serial.h"
+#include "asm/arch/regs-gpio.h"
+#include "asm/arch/regs-watchdog.h"
+
+#include <asm/arch/map.h>
+
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#undef S3C2410_WDOGREG
+
+#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX (14)
+
+#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+
+static __inline__ void
+uart_wr(unsigned int reg, unsigned int val)
+{
+ volatile unsigned int *ptr;
+
+ ptr = (volatile unsigned int *)(reg + uart_base);
+ *ptr = val;
+}
+
+static __inline__ unsigned int
+uart_rd(unsigned int reg)
+{
+ volatile unsigned int *ptr;
+
+ ptr = (volatile unsigned int *)(reg + uart_base);
+ return *ptr;
+}
+
+
+/* we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+*/
+
+static void
+putc(char ch)
+{
+ int cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+
+ cpuid &= S3C2410_GSTATUS1_IDMASK;
+
+ if (ch == '\n')
+ putc('\r'); /* expand newline to \r\n */
+
+ if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+ int level;
+
+ while (1) {
+ level = uart_rd(S3C2410_UFSTAT);
+
+ if (cpuid == S3C2410_GSTATUS1_2440) {
+ level &= S3C2440_UFSTAT_TXMASK;
+ level >>= S3C2440_UFSTAT_TXSHIFT;
+ } else {
+ level &= S3C2410_UFSTAT_TXMASK;
+ level >>= S3C2410_UFSTAT_TXSHIFT;
+ }
+
+ if (level < FIFO_MAX)
+ break;
+ }
+
+ } else {
+ /* not using fifos */
+
+ while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE);
+ }
+
+ /* write byte to transmission register */
+ uart_wr(S3C2410_UTXH, ch);
+}
+
+static void
+putstr(const char *ptr)
+{
+ for (; *ptr != '\0'; ptr++) {
+ putc(*ptr);
+ }
+}
+
+/* CONFIG_S3C2410_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+*/
+
+#ifdef CONFIG_S3C2410_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+
+static inline void arch_decomp_wdog(void)
+{
+ __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+ __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+ __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+ __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+static void error(char *err);
+
+static void
+arch_decomp_setup(void)
+{
+ /* we may need to setup the uart(s) here if we are not running
+ * on an BAST... the BAST will have left the uarts configured
+ * after calling linux.
+ */
+
+ arch_decomp_wdog_start();
+}
+
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h
new file mode 100644
index 0000000..1cc85a0
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/usb-control.h
@@ -0,0 +1,45 @@
+/* linux/include/asm-arm/arch-s3c2410/usb-control.h
+ *
+ * (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - usb port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 11-Sep-2004 BJD Created file
+ * 21-Sep-2004 BJD Updated port info
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h"
+
+#define S3C_HCDFLG_USED (1)
+
+struct s3c2410_hcd_port {
+ unsigned char flags;
+ unsigned char power;
+ unsigned char oc_status;
+ unsigned char oc_changed;
+};
+
+struct s3c2410_hcd_info {
+ struct usb_hcd *hcd;
+ struct s3c2410_hcd_port port[2];
+
+ void (*power_control)(int port, int to);
+ void (*enable_oc)(struct s3c2410_hcd_info *, int on);
+ void (*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+ if (info->report_oc != NULL) {
+ (info->report_oc)(info, ports);
+ }
+}
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h
new file mode 100644
index 0000000..5fe72ad
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vmalloc.h
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-s3c2410/vmalloc.h
+ *
+ * from linux/include/asm-arm/arch-iop3xx/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+ *
+ * Changelog:
+ * 12-Mar-2004 BJD Fixed header, added include protection
+ * 12=Mar-2004 BJD Fixed VMALLOC_END definitions
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+
+#define VMALLOC_OFFSET (8*1024*1024)
+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
new file mode 100644
index 0000000..0ee373a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vr1000-cpld.h
@@ -0,0 +1,22 @@
+/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h
+ *
+ * (c) 2003 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 25-May-2003 BJD Created file, added CTRL1 registers
+ * 19-Mar-2004 BJD Added VR1000 CPLD definitions
+*/
+
+#ifndef __ASM_ARCH_VR1000CPLD_H
+#define __ASM_ARCH_VR1000CPLD_H
+
+#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */
+
+#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h
new file mode 100644
index 0000000..694f771
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vr1000-irq.h
@@ -0,0 +1,30 @@
+/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h
+ *
+ * (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 06-Jan-2003 BJD Linux 2.6.0 version
+ * 19-Mar-2004 BJD Updates for VR1000
+ */
+
+#ifndef __ASM_ARCH_VR1000IRQ_H
+#define __ASM_ARCH_VR1000IRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC IRQ_EINT19
+#define IRQ_IDE0 IRQ_EINT16
+#define IRQ_IDE1 IRQ_EINT17
+#define IRQ_VR1000_SERIAL IRQ_EINT12
+#define IRQ_VR1000_DM9000A IRQ_EINT10
+#define IRQ_VR1000_DM9000N IRQ_EINT9
+#define IRQ_SMALERT IRQ_EINT8
+
+#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h
new file mode 100644
index 0000000..867c935
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/vr1000-map.h
@@ -0,0 +1,116 @@
+/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h
+ *
+ * (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 06-Jan-2003 BJD Linux 2.6.0 version, split specifics from arch/map.h
+ * 12-Mar-2004 BJD Fixed header include protection
+ * 19-Mar-2004 BJD Copied to VR1000 machine headers.
+ * 19-Jan-2005 BJD Updated map definitions
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_VR1000MAP_H
+#define __ASM_ARCH_VR1000MAP_H
+
+#include <asm/arch/bast-map.h>
+
+#define VR1000_IOADDR(x) BAST_IOADDR(x)
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000 8bit, slow
+ * 0x04000000 to 0x08000000 16bit, slow
+ * 0x08000000 to 0x0C000000 16bit, net
+ * 0x0C000000 to 0x10000000 16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB IDE primary channel
+ * 0x02100000 to 0x02200000 1MB IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ * nGCS2 - 8bit, slow
+ * nGCS3 - 16bit, slow
+ * nGCS4 - 16bit, net
+ * nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI (0x02000000)
+#define VR1000_PA_IDEPRIAUX (0x02800000)
+#define VR1000_PA_IDESEC (0x03000000)
+#define VR1000_PA_IDESECAUX (0x03800000)
+#define VR1000_PA_DM9000 (0x05000000)
+
+#define VR1000_PA_SERIAL (0x11800000)
+#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS VR1000_VAM_CS4
+
+#endif /* __ASM_ARCH_VR1000MAP_H */